* is hold) occurred, zfs_dirty_inode open a txg failed, and wait previous
* txg "n" completed.
* 3. context #1 call uiomove to write, however page fault is occurred in
- * uiomove, which means it need mm_sem, but mm_sem is hold by
+ * uiomove, which means it needs mm_sem, but mm_sem is hold by
* context #2, so it stuck and can't complete, then txg "n" will not
* complete.
*
}
#
-# Check if the given device is a multipath device and if there is a sybolic
+# Check if the given device is a multipath device and if there is a symbolic
# link to a device mapper and to a disk
# Currently no support for dm devices alone without multipath
#
# Size should be specified with units as per
# the `format` command requirements eg. 100mb 3gb
#
-# NOTE: This entire interface is problematic for the Linux parted utilty
+# NOTE: This entire interface is problematic for the Linux parted utility
# which requires the end of the partition to be specified. It would be
# best to retire this interface and replace it with something more flexible.
# At the moment a best effort is made.
# dirnum: the maximum number of subdirectories to use, -1 no limit
# filenum: the maximum number of files per subdirectory
# bytes: number of bytes to write
-# num_writes: numer of types to write out bytes
+# num_writes: number of types to write out bytes
# data: the data that will be written
#
# E.g.
#
# check if the system was installed as zfsroot or not
-# return: 0 ture, otherwise false
+# return: 0 if zfsroot, non-zero if not
#
function is_zfsroot
{
#
# Get the given file/directory access mode
#
-# $1 object -- file or directroy
+# $1 object -- file or directory
#
function get_mode #<obj>
{
#
# Get the given file/directory ACL
#
-# $1 object -- file or directroy
+# $1 object -- file or directory
#
function get_acl #<obj>
{
#
# Get the given file/directory ACL
#
-# $1 object -- file or directroy
+# $1 object -- file or directory
#
function get_compact_acl #<obj>
{
#
# Count how many ACEs for the specified file or directory.
#
-# $1 file or directroy name
+# $1 file or directory name
#
function count_ACE #<file or dir name>
{
if [[ ! -e $1 ]]; then
- log_note "Need input file or directroy name."
+ log_note "Need input file or directory name."
return 1
fi
#
# Get the given file/directory xattr
#
-# $1 object -- file or directroy
+# $1 object -- file or directory
#
function get_xattr #<obj>
{
# Verify set, export and destroy when cachefile is set on pool.
#
# STRATEGY:
-# 1. Create two pools with one same cahcefile1.
+# 1. Create two pools with one same cachefile1.
# 2. Set cachefile of the two pools to another same cachefile2.
-# 3. Verify cachefile1 not exist.
+# 3. Verify cachefile1 does not exist.
# 4. Export the two pools.
# 5. Verify cachefile2 not exist.
# 6. Import the two pools and set cachefile to cachefile2.
# DESCRIPTION:
# For the filesystem with casesensitivity=insensitive, normalization=formD,
-# check that lookup succeds using any name form.
+# check that lookup succeeds using any name form.
#
# STRATEGY:
# For each c/n name form:
return 0
EOF
-log_pass "Listing zfs user properies should work correctly."
+log_pass "Listing zfs user properties should work correctly."
log_note "$snap_count snapshots created by ZCP"
if [ "$snap_count" -eq 0 ]; then
- log_fail "Channel progam failed to run."
+ log_fail "Channel program failed to run."
elif [ "$snap_count" -gt 50 ]; then
log_fail "Too many snapshots after a cancel ($snap_count)."
else
names=$(zfs list -rt all -o name $TESTPOOL)
log_must verify_clones 3 0
-log_note "verfify clone property for clone deletion"
+log_note "verify clone property for clone deletion"
i=1
for ds in $datasets; do
log_must zfs destroy $ds/$TESTCLONE.$i
check_used $used $val
done
-log_note "Verify df(1M) can corectly display the space charged."
+log_note "Verify df(1M) can correctly display the space charged."
for val in 1 2 3; do
used=`df -F zfs -k /$TESTPOOL/fs_$val/$FILE | grep $TESTPOOL/fs_$val \
| awk '{print $3}'`
#
# DESCRIPTION:
-# 'zfs create -p' should work as expecteed
+# 'zfs create -p' should work as expected
#
# STRATEGY:
# 1. To create $newdataset with -p option, first make sure the upper level
# run 'zfs destroy $opt <dataset>'. 3rd, check the system status.
#
# $1 option of 'zfs destroy'
-# $2 dataset will be destroied.
+# $2 dataset will be destroyed.
#
function test_n_check
{
check_dataset datasetexists $CTR $VOL
check_dataset datasetnonexists $VOLSNAP $VOLCLONE
- # Due to recusive destroy being a best-effort operation,
- # all of the non-busy datasets bellow should be gone now.
+ # Due to recursive destroy being a best-effort operation,
+ # all of the non-busy datasets below should be gone now.
check_dataset datasetnonexists $FS $FSSNAP $FSCLONE
fi
#
# DESCRIPTION:
# 'zfs destroy -R <snapshot>' can destroy all the child
-# snapshots and preserves all the nested datasetss.
+# snapshots and preserves all the nested datasets.
#
# STRATEGY:
# 1. Create nested datasets in the storage pool.
datasetexists $ds || log_fail "Create $ds dataset fail."
done
-# create recursive nestedd snapshot
+# create recursive nested snapshot
log_must zfs snapshot -r $TESTPOOL/$TESTFS1@snap
for ds in $datasets; do
datasetexists $ds@snap || log_fail "Create $ds@snap snapshot fail."
projects / zfs / commitdiff