+++ /dev/null
-#!/bin/sh
-# $Header: /cvsroot/pgsql/src/test/regress/Attic/regress.sh,v 1.56 2000/11/11 19:56:20 thomas Exp $
-#
-if [ $# -eq 0 ]; then
- echo "Syntax: $0 <hostname> [extra-tests]"
- exit 1
-fi
-
-hostname=$1
-shift
-extratests="$*"
-
-case $hostname in
- i*86-pc-cygwin* | i386-*-qnx* | *beos*)
- HOSTLOC="-h localhost"
- ;;
- *)
- HOSTLOC=""
- ;;
-esac
-
-if echo '\c' | grep -s c >/dev/null 2>&1
-then
- ECHO_N="echo -n"
- ECHO_C=""
-else
- ECHO_N="echo"
- ECHO_C='\c'
-fi
-
-PGTZ="PST8PDT"; export PGTZ
-PGDATESTYLE="Postgres,US"; export PGDATESTYLE
-unset LC_COLLATE LC_CTYPE LC_MONETARY LC_MESSAGES LC_NUMERIC LC_TIME LC_ALL LANG LANGUAGE
-
-FRONTEND="psql $HOSTLOC -a -q -X"
-
-# ----------
-# Scan resultmap file to find which platform-specific expected files to use.
-# The format of each line of the file is
-# testname/hostnamepattern=substitutefile
-# where the hostnamepattern is evaluated per the rules of expr(1) --- namely,
-# it is a standard regular expression with an implicit ^ at the start.
-#
-# The tempfile hackery is needed because some shells will run the loop
-# inside a subshell, whereupon shell variables set therein aren't seen
-# outside the loop :-(
-# ----------
-TMPFILE="matches.$$"
-cat /dev/null > $TMPFILE
-while read LINE
-do
- HOSTPAT=`expr "$LINE" : '.*/\(.*\)='`
- if [ `expr "$hostname" : "$HOSTPAT"` -ne 0 ]
- then
- # remove hostnamepattern from line so that there are no shell
- # wildcards in SUBSTLIST; else later 'for' could expand them!
- TESTNAME=`expr "$LINE" : '\(.*\)/'`
- SUBST=`echo "$LINE" | sed 's/^.*=//'`
- echo "$TESTNAME=$SUBST" >> $TMPFILE
- fi
-done <resultmap
-SUBSTLIST=`cat $TMPFILE`
-rm -f $TMPFILE
-
-if [ -d ./obj ]; then
- cd ./obj
-fi
-
-[ -d results ] || mkdir results
-
-echo "=============== Notes... ================="
-echo "postmaster must already be running for the regression tests to succeed."
-echo "The time zone is set to PST8PDT for these tests by the client frontend."
-echo "Please report any apparent problems to ports@postgresql.org"
-echo "See regress/README for more information."
-echo ""
-
-echo "=============== dropping old regression database... ================="
-dropdb $HOSTLOC regression
-
-echo "=============== creating new regression database... ================="
-if [ -n "$MULTIBYTE" ];then
- mbtests=`echo $MULTIBYTE | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- PGCLIENTENCODING="$MULTIBYTE"
- export PGCLIENTENCODING
- ENCODINGOPT="-E $MULTIBYTE"
-else
- mbtests=""
- unset PGCLIENTENCODING
- ENCODINGOPT=""
-fi
-createdb $ENCODINGOPT $HOSTLOC regression
-if [ $? -ne 0 ]; then
- echo createdb failed
- exit 1
-fi
-
-if [ "x$hostname" != "xi386-pc-qnx" ]; then
-echo "=============== installing languages... ================="
-$ECHO_N "installing PL/pgSQL .. " $ECHO_C
-createlang $HOSTLOC plpgsql regression
-if [ $? -ne 0 -a $? -ne 2 ]; then
- echo failed
- exit 1
-else
- echo ok
-fi
-fi
-
-echo "=============== running regression queries... ================="
-cat /dev/null > regression.diffs
-
-if [ "x$hostname" = "xi386-pc-qnx" ]; then
- DIFFOPT="-b"
-else
- DIFFOPT="-w"
-fi
-
-stdtests=`awk '
-$1=="test" { print $2; }
- {}
-' < sql/run_check.tests`
-
-for tst in $stdtests $mbtests $extratests
-do
- $ECHO_N "${tst} .. " $ECHO_C
- $FRONTEND regression < sql/${tst}.sql > results/${tst}.out 2>&1
-
- #
- # Check list extracted from resultmap to see if we should compare
- # to a system-specific expected file.
- # There shouldn't be multiple matches, but take the last if there are.
- #
- EXPECTED="expected/${tst}.out"
- for LINE in $SUBSTLIST
- do
- if [ `expr "$LINE" : "$tst="` -ne 0 ]
- then
- SUBST=`echo "$LINE" | sed 's/^.*=//'`
- EXPECTED="expected/${SUBST}.out"
- fi
- done
-
- if [ `diff ${DIFFOPT} ${EXPECTED} results/${tst}.out | wc -l` -ne 0 ]; then
- ( diff ${DIFFOPT} -C3 ${EXPECTED} results/${tst}.out; \
- echo ""; \
- echo "----------------------"; \
- echo "" ) >> regression.diffs
- echo failed
- else
- echo ok
- fi
-done
-
-exit 0
-
-echo "=============== running error queries ... ================="
-$FRONTEND regression < errors.sql
-# this will generate error result code
-
-#set this to 1 to avoid clearing the database
-debug=0
-
-if [ test "$debug" -eq 1 ]; then
- echo Skipping clearing and deletion of the regression database
-else
- echo "=============== clearing regression database... ================="
- $FRONTEND regression < drop.sql
- if [ $? -ne 0 ]; then
- echo the drop script has an error
- exit 1
- fi
-
- exit 0
- echo "=============== dropping regression database... ================="
- dropdb regression
- if [ $? -ne 0 ]; then
- echo dropdb failed
- exit 1
- fi
-
- exit 0
-fi
+++ /dev/null
-#!/bin/sh
-#
-# $Header: /cvsroot/pgsql/src/test/regress/Attic/run_check.sh,v 1.26 2000/09/29 17:17:37 petere Exp $
-
-# ----------
-# Check call syntax
-# ----------
-if [ $# -eq 0 ]
-then
- echo "Syntax: $0 <hostname> [extra-tests]"
- exit 1
-fi
-
-# ----------
-# Change to the regression test directory explicitly
-# ----------
-cd `dirname $0`
-
-# ----------
-# Some paths used during the test
-# ----------
-PWD=`pwd`
-CHKDIR="$PWD/tmp_check"
-PGDATA="$CHKDIR/data"
-LIBDIR="$CHKDIR/lib"
-BINDIR="$CHKDIR/bin"
-LOGDIR="$CHKDIR/log"
-TIMDIR="$CHKDIR/timestamp"
-PGPORT="65432"
-PGLIB="$LIBDIR"
-PMPID=""
-PMOPTIONS=${PMOPTIONS:-"-o -F"}
-
-export CHKDIR
-export PGDATA
-export PGLIB
-export LOGDIR
-export TIMDIR
-export PGPORT
-
-# Needed by psql and pg_encoding (if you run multibyte).
-# I hope this covers all platforms with shared libraries,
-# otherwise feel free to cover your platform here as well.
-if [ "$LD_LIBRARY_PATH" ]; then
- old_LD_LIBRARY_PATH="$LD_LIBRARY_PATH"
- LD_LIBRARY_PATH="$LIBDIR:$old_LD_LIBRARY_PATH"
-else
- LD_LIBRARY_PATH="$LIBDIR"
-fi
-export LD_LIBRARY_PATH
-
-# ----------
-# Unset locale settings
-# ----------
-
-unset LC_COLLATE LC_CTYPE LC_MONETARY LC_MESSAGES LC_NUMERIC LC_TIME LC_ALL LANG LANGUAGE
-
-# ----------
-# Get the commandline parameters
-# ----------
-hostname=$1
-shift
-extratests="$*"
-
-# ----------
-# Special setting for Windows (no unix domain sockets)
-# ----------
-if [ "x$hostname" = "xwin" -o "x$hostname" = "xi386-pc-qnx" ]
-then
- HOSTLOC="-h localhost"
- USETCPIP="-i"
-else
- HOSTLOC=""
- USETCPIP=""
-fi
-
-unset PGHOST
-
-# ----------
-# Determine if echo -n works
-# ----------
-if echo '\c' | grep -s c >/dev/null 2>&1
-then
- ECHO_N="echo -n"
- ECHO_C=""
-else
- ECHO_N="echo"
- ECHO_C='\c'
-fi
-
-# ----------
-# Set backend timezone and datestyle explicitly
-#
-# To pass the horology test in its current form, the postmaster must be
-# started with PGDATESTYLE=ISO, while the frontend must be started with
-# PGDATESTYLE=Postgres. We set the postmaster values here and change
-# to the frontend settings after the postmaster has been started.
-# ----------
-PGTZ="PST8PDT"; export PGTZ
-PGDATESTYLE="ISO,US"; export PGDATESTYLE
-
-# ----------
-# The SQL shell to use during this test
-# ----------
-FRONTEND="$BINDIR/psql $HOSTLOC -a -q -X"
-
-# ----------
-# Scan resultmap file to find which platform-specific expected files to use.
-# The format of each line of the file is
-# testname/hostnamepattern=substitutefile
-# where the hostnamepattern is evaluated per the rules of expr(1) --- namely,
-# it is a standard regular expression with an implicit ^ at the start.
-#
-# The tempfile hackery is needed because some shells will run the loop
-# inside a subshell, whereupon shell variables set therein aren't seen
-# outside the loop :-(
-# ----------
-TMPFILE="matches.$$"
-cat /dev/null > $TMPFILE
-while read LINE
-do
- HOSTPAT=`expr "$LINE" : '.*/\(.*\)='`
- if [ `expr "$hostname" : "$HOSTPAT"` -ne 0 ]
- then
- # remove hostnamepattern from line so that there are no shell
- # wildcards in SUBSTLIST; else later 'for' could expand them!
- TESTNAME=`expr "$LINE" : '\(.*\)/'`
- SUBST=`echo "$LINE" | sed 's/^.*=//'`
- echo "$TESTNAME=$SUBST" >> $TMPFILE
- fi
-done <resultmap
-SUBSTLIST=`cat $TMPFILE`
-rm -f $TMPFILE
-
-# ----------
-# Catch SIGINT and SIGTERM to shutdown the postmaster
-# ----------
-trap ' echo ""
- echo ""
- echo "user abort ..."
- if [ ! -z "$PMPID" ]
- then
- echo "Signalling postmaster with PID $PMPID to shutdown immediately"
- kill -2 $PMPID
- wait $PMPID
- echo ""
- fi
- echo ""
- LD_LIBRARY_PATH="$old_LD_LIBRARY_PATH"
- exit 1
-' 2 15
-
-# ----------
-# Prepare a clean check directory
-# ----------
-if [ -d $CHKDIR ]
-then
- echo "=============== Removing old ./tmp_check directory ... ================"
- rm -rf $CHKDIR
-fi
-
-echo "=============== Create ./tmp_check directory ================"
-mkdir -p $CHKDIR
-mkdir -p $LOGDIR
-mkdir -p results
-
-
-# ----------
-# Install this build into ./tmp/check
-# ----------
-echo "=============== Installing new build into ./tmp_check ================"
-${MAKE:-gmake} -C ../../.. POSTGRESDIR=$CHKDIR prefix=$CHKDIR install >$LOGDIR/install.log 2>&1
-
-if [ $? -ne 0 ]
-then
- echo ""
- echo "ERROR: Check installation failed - cannot continue"
- echo "Please examine $LOGDIR/install.log"
- echo "for the reason."
- echo ""
- exit 2
-fi
-
-
-# ----------
-# Change the path so that all binaries from the current
-# build are first candidates
-# ----------
-PATH=$CHKDIR/bin:$PATH
-export PATH
-
-
-# ----------
-# Run initdb to initialize a database system in ./tmp_check
-# ----------
-echo "=============== Initializing check database instance ================"
-initdb -D $PGDATA -L $CHKDIR/share --noclean >$LOGDIR/initdb.log 2>&1
-
-if [ $? -ne 0 ]
-then
- echo ""
- echo "ERROR: Check initdb failed - cannot continue"
- echo "Please examine $LOGDIR/initdb.log"
- echo "for the reason."
- echo ""
- exit 3
-fi
-
-
-# ----------
-# Start a postmaster for the check instance and give
-# him some time to pass the WAL recovery code.
-#----------
-echo "=============== Starting regression postmaster ================"
-postmaster -D $PGDATA $USETCPIP -p $PGPORT $PMOPTIONS >$LOGDIR/postmaster.log 2>&1 &
-PMPID=$!
-sleep 2
-
-if kill -0 $PMPID >/dev/null 2>&1
-then
- echo "Regression postmaster is running - PID=$PMPID PGPORT=$PGPORT"
-else
- echo ""
- echo "ERROR: Regression postmaster did not startup."
- echo "Please examine $LOGDIR/postmaster.log"
- echo "for the reason."
- echo ""
- exit 4
-fi
-
-# ----------
-# Set frontend timezone and datestyle explicitly
-# ----------
-PGTZ="PST8PDT"; export PGTZ
-PGDATESTYLE="Postgres,US"; export PGDATESTYLE
-
-# ----------
-# Create the regression database
-# ----------
-echo "=============== Creating regression database... ================"
-if [ -n "$MULTIBYTE" ];then
- mbtests=`echo $MULTIBYTE | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- PGCLIENTENCODING="$MULTIBYTE"
- export PGCLIENTENCODING
- ENCODINGOPT="-E $MULTIBYTE"
-else
- mbtests=""
- unset PGCLIENTENCODING
- ENCODINGOPT=""
-fi
-createdb $ENCODINGOPT $HOSTLOC regression
-if [ $? -ne 0 ]; then
- echo createdb failed
- kill -15 $PMPID
- exit 1
-fi
-
-
-# ----------
-# Install the PL/pgSQL language in it
-# ----------
-if [ "x$hostname" != "xi386-pc-qnx" ]; then
-echo "=============== Installing PL/pgSQL... ================"
-createlang -L $LIBDIR $HOSTLOC plpgsql regression
-if [ $? -ne 0 -a $? -ne 2 ]; then
- echo createlang failed
- kill -15 $PMPID
- exit 1
-fi
-fi
-
-
-# ----------
-# Run the regression tests specified in the ./sql/run_check.tests file
-# ----------
-echo "=============== Running regression queries... ================"
-cat /dev/null > regression.diffs
-cat /dev/null > regress.out
-
-if [ "x$hostname" = "xi386-pc-qnx" ]; then
- DIFFOPT="-b"
-else
- DIFFOPT="-w"
-fi
-
-TESTS=./sql/run_check.tests
-lno=0
-(
- cat $TESTS
- for name in $extratests ; do
- echo "test $name"
- done
-) | while read line ; do
-
- # ----------
- # Count line numbers and skip comments and empty lines
- # ----------
- lno=`expr $lno + 1`
- line=`echo $line | sed -e 's/[ ]*#.*//'`
- if [ -z "$line" ]
- then
- continue
- fi
-
- # ----------
- # Extract the type keyword and the name
- # ----------
- type=`echo $line | awk '{print $1;}'`
- name=`echo $line | awk '{print $2;}'`
-
- case $type in
- parallel) # ----------
- # This is the beginning of a new group of
- # tests that should be executed in parallel.
- # ----------
- parlist=
- parlno=$lno
- pargroup=$name
- parntests=0
- parpar=0
- while read line ; do
- # ----------
- # Again count line numbers and skip comments
- # ----------
- lno=`expr $lno + 1`
- line=`echo $line | sed -e 's/[ ]*#.*//'`
- if [ -z "$line" ]
- then
- continue
- fi
-
- # ----------
- # Collect and count the number of tests to
- # execute parallel
- # ----------
- type=`echo $line | awk '{print $1;}'`
- name=`echo $line | awk '{print $2;}'`
-
- if [ "$type" = "endparallel" ]
- then
- parend=1
- break
- fi
- if [ "$type" = "parallel" ]
- then
- echo ""
- echo "$TESTS line $lno: parallel cannot be nested"
- echo ""
- exit 5
- fi
- if [ "$type" != "test" ]
- then
- echo ""
- echo "$TESTS line $lno: syntax error"
- echo ""
- exit 5
- fi
-
- if [ ! -z "$parlist" ]
- then
- parlist="$parlist "
- fi
-
- parlist="${parlist}$name"
- parntests=`expr $parntests + 1`
- done
-
- # ----------
- # Check that we found a matching 'endparallel'
- # ----------
- if [ $parend -eq 0 ]
- then
- echo ""
- echo "$TESTS at EOF: missing endparallel for line $parlno"
- echo ""
- exit 5
- fi
-
- # ----------
- # Tell what we're doing and then start them all, using
- # a subshell for each one. The subshell is just there
- # to print the test name when it finishes, so one can
- # see which tests finish fastest. We do NOT run the
- # ok/failed comparison tests in the parallel subshells,
- # because we want the diffs (if any) to come out in a
- # predictable order --- and certainly not interleaved!
- # ----------
- gnam=`echo "$pargroup ($parntests tests)" | awk '{printf "%-26.26s", $0;}'`
- echo "parallel $gnam ..."
-
- for name in $parlist
- do
- (
- $FRONTEND regression < sql/${name}.sql \
- > results/${name}.out 2>&1
- $ECHO_N " $name" $ECHO_C
- ) &
- done
- wait
- echo ""
-
- # ----------
- # Setup status information for the diff check below
- # ----------
- checklist="$parlist"
- checkpname=1
- ;;
-
- test) # ----------
- # This is a test that must be executed serialized
- # ----------
- pnam=`echo $name | awk '{printf "%-20.20s", $1;}'`
- $ECHO_N "sequential test $pnam ... " $ECHO_C
-
- $FRONTEND regression < sql/${name}.sql \
- > results/${name}.out 2>&1
-
- # ----------
- # Setup status information for the diff check below
- # ----------
- checklist="$name"
- checkpname=0
- ;;
-
- *) # ----------
- # And this is space for extensions
- # ----------
- echo ""
- echo "$TESTS line $lno: syntax error"
- echo ""
- exit 5
- ;;
- esac
-
- # ----------
- # One single or a group of parallel tests has been completed.
- # Check the output against the expected results.
- #
- # On the fly we create run_check.out and regress.out in the
- # old format, so checkresults will still find the proper
- # information.
- # ----------
- for name in $checklist ; do
- if [ $checkpname -ne 0 ]
- then
- pnam=`echo $name | awk '{printf "%-20.20s", $1;}'`
- $ECHO_N " test $pnam ... " $ECHO_C
- fi
-
- #
- # Check list extracted from resultmap to see if we should compare
- # to a system-specific expected file.
- # There shouldn't be multiple matches, but take the last if there are.
- #
- EXPECTED="expected/${name}.out"
- for LINE in $SUBSTLIST
- do
- if [ `expr "$LINE" : "$name="` -ne 0 ]
- then
- SUBST=`echo "$LINE" | sed 's/^.*=//'`
- EXPECTED="expected/${SUBST}.out"
- fi
- done
-
- if [ `diff ${DIFFOPT} ${EXPECTED} results/${name}.out | wc -l` -ne 0 ]
- then
- ( diff ${DIFFOPT} -C3 ${EXPECTED} results/${name}.out ; \
- echo "" ; \
- echo "----------------------" ; \
- echo "" ; \
- ) >> regression.diffs
- echo "FAILED"
- echo "$name .. failed" >> regress.out
- else
- echo "ok"
- echo "$name .. ok" >> regress.out
- fi
- done
-done | tee run_check.out 2>&1
-
-# ----------
-# Finally kill the postmaster we started
-# ----------
-echo "=============== Terminating regression postmaster ================"
-kill -15 $PMPID
-
-LD_LIBRARY_PATH="$old_LD_LIBRARY_PATH"
-
-exit 0
projects / postgresql / commitdiff