int sum_in_vectors = 0;
uint32_t lastmv_as_int = 0;
struct twopass_rc *const twopass = &cpi->twopass;
-
- int_mv zero_ref_mv;
-
- zero_ref_mv.as_int = 0;
+ const MV zero_mv = {0, 0};
vp9_clear_system_state(); // __asm emms;
setup_dst_planes(xd, new_yv12, 0, 0);
xd->mi_8x8 = cm->mi_grid_visible;
- // required for vp9_frame_init_quantizer
- xd->mi_8x8[0] = cm->mi;
+ xd->mi_8x8[0] = cm->mi; // required for vp9_frame_init_quantizer
setup_block_dptrs(&x->e_mbd, cm->subsampling_x, cm->subsampling_y);
}
x->skip_recode = 0;
-
- // Initialise the MV cost table to the defaults
- // if( cm->current_video_frame == 0)
- // if ( 0 )
- {
- vp9_init_mv_probs(cm);
- vp9_initialize_rd_consts(cpi);
- }
+ vp9_init_mv_probs(cm);
+ vp9_initialize_rd_consts(cpi);
// tiling is ignored in the first pass
vp9_tile_init(&tile, cm, 0, 0);
// for each macroblock col in image
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++) {
int this_error;
- int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row);
+ const int use_dc_pred = (mb_col || mb_row) && (!mb_col || !mb_row);
double error_weight = 1.0;
const BLOCK_SIZE bsize = get_bsize(cm, mb_row, mb_col);
cm->mi_rows, cm->mi_cols);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
- int energy = vp9_block_energy(cpi, x, bsize);
+ const int energy = vp9_block_energy(cpi, x, bsize);
error_weight = vp9_vaq_inv_q_ratio(energy);
}
// Set up limit values for motion vectors to prevent them extending
// outside the UMV borders.
x->mv_col_min = -((mb_col * 16) + BORDER_MV_PIXELS_B16);
- x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16)
- + BORDER_MV_PIXELS_B16;
+ x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16) + BORDER_MV_PIXELS_B16;
// Other than for the first frame do a motion search
if (cm->current_video_frame > 0) {
// based search as well.
if (best_ref_mv.as_int) {
tmp_err = INT_MAX;
- first_pass_motion_search(cpi, x, &zero_ref_mv.as_mv, &tmp_mv.as_mv,
+ first_pass_motion_search(cpi, x, &zero_mv, &tmp_mv.as_mv,
&tmp_err);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state(); // __asm emms;
xd->plane[0].pre[0].buf = gld_yv12->y_buffer + recon_yoffset;
gf_motion_error = zz_motion_search(cpi, x);
- first_pass_motion_search(cpi, x, &zero_ref_mv.as_mv, &tmp_mv.as_mv,
+ first_pass_motion_search(cpi, x, &zero_mv, &tmp_mv.as_mv,
&gf_motion_error);
if (cpi->oxcf.aq_mode == VARIANCE_AQ) {
vp9_clear_system_state(); // __asm emms;
gf_motion_error *= error_weight;
}
- if ((gf_motion_error < motion_error) &&
- (gf_motion_error < this_error)) {
+ if (gf_motion_error < motion_error && gf_motion_error < this_error)
second_ref_count++;
- }
// Reset to last frame as reference buffer
xd->plane[0].pre[0].buf = lst_yv12->y_buffer + recon_yoffset;
fps.mvr_abs = (double)sum_mvr_abs / mvcount;
fps.MVc = (double)sum_mvc / mvcount;
fps.mvc_abs = (double)sum_mvc_abs / mvcount;
- fps.MVrv = ((double)sum_mvrs - (fps.MVr * fps.MVr / mvcount)) /
- mvcount;
- fps.MVcv = ((double)sum_mvcs - (fps.MVc * fps.MVc / mvcount)) /
- mvcount;
+ fps.MVrv = ((double)sum_mvrs - (fps.MVr * fps.MVr / mvcount)) / mvcount;
+ fps.MVcv = ((double)sum_mvcs - (fps.MVc * fps.MVc / mvcount)) / mvcount;
fps.mv_in_out_count = (double)sum_in_vectors / (mvcount * 2);
fps.new_mv_count = new_mv_count;
- fps.pcnt_motion = (double)mvcount / cpi->common.MBs;
+ fps.pcnt_motion = (double)mvcount / cm->MBs;
} else {
fps.MVr = 0.0;
fps.mvr_abs = 0.0;
return fclamp(pow(error_term, power_term), 0.05, 5.0);
}
-static int estimate_max_q(VP9_COMP *cpi,
- FIRSTPASS_STATS *fpstats,
+static int estimate_max_q(VP9_COMP *cpi, FIRSTPASS_STATS *fpstats,
int section_target_bandwitdh) {
int q;
const int num_mbs = cpi->common.MBs;
// This function gives and estimate of how badly we believe
// the prediction quality is decaying from frame to frame.
-static double get_prediction_decay_rate(VP9_COMP *cpi,
- FIRSTPASS_STATS *next_frame) {
+static double get_prediction_decay_rate(const VP9_COMMON *cm,
+ const FIRSTPASS_STATS *next_frame) {
// Look at the observed drop in prediction quality between the last frame
// and the GF buffer (which contains an older frame).
const double mb_sr_err_diff = (next_frame->sr_coded_error -
- next_frame->coded_error) / cpi->common.MBs;
+ next_frame->coded_error) / cm->MBs;
const double second_ref_decay = mb_sr_err_diff <= 512.0
? fclamp(pow(1.0 - (mb_sr_err_diff / 512.0), 0.5), 0.85, 1.0)
: 0.85;
int j;
FIRSTPASS_STATS *position = cpi->twopass.stats_in;
FIRSTPASS_STATS tmp_next_frame;
- double zz_inter;
// Look ahead a few frames to see if static condition
// persists...
if (EOF == input_stats(&cpi->twopass, &tmp_next_frame))
break;
- zz_inter = (tmp_next_frame.pcnt_inter - tmp_next_frame.pcnt_motion);
- if (zz_inter < 0.999)
+ if (tmp_next_frame.pcnt_inter - tmp_next_frame.pcnt_motion < 0.999)
break;
}
- // Reset file position
+
reset_fpf_position(&cpi->twopass, position);
// Only if it does do we signal a transition to still
// This function detects a flash through the high relative pcnt_second_ref
// score in the frame following a flash frame. The offset passed in should
// reflect this
-static int detect_flash(VP9_COMP *cpi, int offset) {
+static int detect_flash(const struct twopass_rc *twopass, int offset) {
FIRSTPASS_STATS next_frame;
int flash_detected = 0;
// Read the frame data.
// The return is FALSE (no flash detected) if not a valid frame
- if (read_frame_stats(&cpi->twopass, &next_frame, offset) != EOF) {
+ if (read_frame_stats(twopass, &next_frame, offset) != EOF) {
// What we are looking for here is a situation where there is a
// brief break in prediction (such as a flash) but subsequent frames
// are reasonably well predicted by an earlier (pre flash) frame.
// Accumulate Motion In/Out of frame stats
*this_frame_mv_in_out = this_frame->mv_in_out_count * motion_pct;
*mv_in_out_accumulator += this_frame->mv_in_out_count * motion_pct;
- *abs_mv_in_out_accumulator +=
- fabs(this_frame->mv_in_out_count * motion_pct);
+ *abs_mv_in_out_accumulator += fabs(this_frame->mv_in_out_count * motion_pct);
// Accumulate a measure of how uniform (or conversely how random)
// the motion field is. (A ratio of absmv / mv)
if (motion_pct > 0.05) {
- double this_frame_mvr_ratio = fabs(this_frame->mvr_abs) /
+ const double this_frame_mvr_ratio = fabs(this_frame->mvr_abs) /
DOUBLE_DIVIDE_CHECK(fabs(this_frame->MVr));
- double this_frame_mvc_ratio = fabs(this_frame->mvc_abs) /
+ const double this_frame_mvc_ratio = fabs(this_frame->mvc_abs) /
DOUBLE_DIVIDE_CHECK(fabs(this_frame->MVc));
*mv_ratio_accumulator += (this_frame_mvr_ratio < this_frame->mvr_abs)
int f_frames, int b_frames,
int *f_boost, int *b_boost) {
FIRSTPASS_STATS this_frame;
-
+ struct twopass_rc *const twopass = &cpi->twopass;
int i;
double boost_score = 0.0;
double mv_ratio_accumulator = 0.0;
// Search forward from the proposed arf/next gf position
for (i = 0; i < f_frames; i++) {
- if (read_frame_stats(&cpi->twopass, &this_frame, (i + offset)) == EOF)
+ if (read_frame_stats(twopass, &this_frame, (i + offset)) == EOF)
break;
// Update the motion related elements to the boost calculation
// We want to discount the flash frame itself and the recovery
// frame that follows as both will have poor scores.
- flash_detected = detect_flash(cpi, (i + offset)) ||
- detect_flash(cpi, (i + offset + 1));
+ flash_detected = detect_flash(twopass, i + offset) ||
+ detect_flash(twopass, i + offset + 1);
// Cumulative effect of prediction quality decay
if (!flash_detected) {
- decay_accumulator *= get_prediction_decay_rate(cpi, &this_frame);
+ decay_accumulator *= get_prediction_decay_rate(&cpi->common, &this_frame);
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
}
// Search backward towards last gf position
for (i = -1; i >= -b_frames; i--) {
- if (read_frame_stats(&cpi->twopass, &this_frame, (i + offset)) == EOF)
+ if (read_frame_stats(twopass, &this_frame, (i + offset)) == EOF)
break;
// Update the motion related elements to the boost calculation
// We want to discount the the flash frame itself and the recovery
// frame that follows as both will have poor scores.
- flash_detected = detect_flash(cpi, (i + offset)) ||
- detect_flash(cpi, (i + offset + 1));
+ flash_detected = detect_flash(twopass, i + offset) ||
+ detect_flash(twopass, i + offset + 1);
// Cumulative effect of prediction quality decay
if (!flash_detected) {
- decay_accumulator *= get_prediction_decay_rate(cpi, &this_frame);
+ decay_accumulator *= get_prediction_decay_rate(&cpi->common, &this_frame);
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
}
static void define_gf_group(VP9_COMP *cpi, FIRSTPASS_STATS *this_frame) {
FIRSTPASS_STATS next_frame = { 0 };
FIRSTPASS_STATS *start_pos;
+ struct twopass_rc *const twopass = &cpi->twopass;
int i;
double boost_score = 0.0;
double old_boost_score = 0.0;
double mv_ratio_accumulator_thresh;
int max_bits = frame_max_bits(cpi); // Max for a single frame
- unsigned int allow_alt_ref =
- cpi->oxcf.play_alternate && cpi->oxcf.lag_in_frames;
+ unsigned int allow_alt_ref = cpi->oxcf.play_alternate &&
+ cpi->oxcf.lag_in_frames;
int f_boost = 0;
int b_boost = 0;
int active_max_gf_interval;
RATE_CONTROL *const rc = &cpi->rc;
- cpi->twopass.gf_group_bits = 0;
+ twopass->gf_group_bits = 0;
vp9_clear_system_state(); // __asm emms;
- start_pos = cpi->twopass.stats_in;
+ start_pos = twopass->stats_in;
// Load stats for the current frame.
mod_frame_err = calculate_modified_err(cpi, this_frame);
active_max_gf_interval = rc->max_gf_interval;
i = 0;
- while ((i < cpi->twopass.static_scene_max_gf_interval) &&
- (i < rc->frames_to_key)) {
+ while (i < twopass->static_scene_max_gf_interval && i < rc->frames_to_key) {
i++; // Increment the loop counter
// Accumulate error score of frames in this gf group
mod_frame_err = calculate_modified_err(cpi, this_frame);
gf_group_err += mod_frame_err;
- if (EOF == input_stats(&cpi->twopass, &next_frame))
+ if (EOF == input_stats(twopass, &next_frame))
break;
// Test for the case where there is a brief flash but the prediction
// quality back to an earlier frame is then restored.
- flash_detected = detect_flash(cpi, 0);
+ flash_detected = detect_flash(twopass, 0);
// Update the motion related elements to the boost calculation
accumulate_frame_motion_stats(&next_frame,
// Cumulative effect of prediction quality decay
if (!flash_detected) {
last_loop_decay_rate = loop_decay_rate;
- loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
+ loop_decay_rate = get_prediction_decay_rate(&cpi->common, &next_frame);
decay_accumulator = decay_accumulator * loop_decay_rate;
// Monitor for static sections.
if ((next_frame.pcnt_inter - next_frame.pcnt_motion) <
zero_motion_accumulator) {
- zero_motion_accumulator =
- (next_frame.pcnt_inter - next_frame.pcnt_motion);
+ zero_motion_accumulator = next_frame.pcnt_inter -
+ next_frame.pcnt_motion;
}
// Break clause to detect very still sections after motion
old_boost_score = boost_score;
}
- cpi->twopass.gf_zeromotion_pct = (int)(zero_motion_accumulator * 1000.0);
+ twopass->gf_zeromotion_pct = (int)(zero_motion_accumulator * 1000.0);
// Don't allow a gf too near the next kf
if ((rc->frames_to_key - i) < MIN_GF_INTERVAL) {
while (i < (rc->frames_to_key + !rc->next_key_frame_forced)) {
i++;
- if (EOF == input_stats(&cpi->twopass, this_frame))
+ if (EOF == input_stats(twopass, this_frame))
break;
if (i < rc->frames_to_key) {
// How fast is prediction quality decaying
- loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
+ loop_decay_rate = get_prediction_decay_rate(&cpi->common, &next_frame);
// We want to know something about the recent past... rather than
// as used elsewhere where we are concened with decay in prediction
r = RMAX;
// How fast is prediction quality decaying
- if (!detect_flash(cpi, 0)) {
- loop_decay_rate = get_prediction_decay_rate(cpi, &next_frame);
+ if (!detect_flash(twopass, 0)) {
+ loop_decay_rate = get_prediction_decay_rate(&cpi->common, &next_frame);
decay_accumulator *= loop_decay_rate;
decay_accumulator = decay_accumulator < MIN_DECAY_FACTOR
? MIN_DECAY_FACTOR : decay_accumulator;
projects / libvpx / commitdiff