efuse: update the scheme of getting chip revision

diff --git a/components/efuse/esp32/esp_efuse_table.c b/components/efuse/esp32/esp_efuse_table.c
index 36b54b50ba30f9e00d07edb1639fd43fc0012a7b..e0d4e2d10437e3a22c1a4befea1085b84df7c8e0 100644 (file)
--- a/components/efuse/esp32/esp_efuse_table.c
+++ b/components/efuse/esp32/esp_efuse_table.c
@@ -17,7 +17,7 @@
 #include <assert.h>
 #include "esp_efuse_table.h"
 
-// md5_digest_table 544d434da010ce22f7db1b14d38e1d66
+// md5_digest_table 2e23344575b3d07f01ecb695294e9770
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -151,6 +151,10 @@ static const esp_efuse_desc_t CHIP_VER_REV1[] = {
     {EFUSE_BLK0, 111, 1},       // EFUSE_RD_CHIP_VER_REV1,
 };
 
+static const esp_efuse_desc_t CHIP_VER_REV2[] = {
+    {EFUSE_BLK0, 180, 1},       // EFUSE_RD_CHIP_VER_REV2,
+};
+
 static const esp_efuse_desc_t XPD_SDIO_REG[] = {
     {EFUSE_BLK0, 142, 1},       // EFUSE_RD_XPD_SDIO_REG,
 };
@@ -336,6 +340,11 @@ const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_REV1[] = {
     NULL
 };
 
+const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_REV2[] = {
+    &CHIP_VER_REV2[0],                 // EFUSE_RD_CHIP_VER_REV2
+    NULL
+};
+
 const esp_efuse_desc_t* ESP_EFUSE_XPD_SDIO_REG[] = {
     &XPD_SDIO_REG[0],                  // EFUSE_RD_XPD_SDIO_REG
     NULL

diff --git a/components/efuse/esp32/esp_efuse_table.csv b/components/efuse/esp32/esp_efuse_table.csv
index 23b28ec47dcbadfe27a6752a6ac1353ef373e378..1445ac8ae6674079f7519a6bbf5f3fdfae9f801e 100644 (file)
--- a/components/efuse/esp32/esp_efuse_table.csv
+++ b/components/efuse/esp32/esp_efuse_table.csv
@@ -6,7 +6,7 @@
 ##########################################################################
 # *) The value MAX_BLK_LEN depends on CONFIG_EFUSE_MAX_BLK_LEN, will be replaced with "None" - 256. "3/4" - 192. "REPEAT" - 128.
 # !!!!!!!!!!! #
-# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse_common_table" 
+# After editing this file, run the command manually "make efuse_common_table" or "idf.py efuse_common_table"
 # this will generate new source files, next rebuild all the sources.
 # !!!!!!!!!!! #
 
@@ -36,11 +36,11 @@ ABS_DONE_0,             EFUSE_BLK0,    196,   1,     Secure boot is enabled for
 ENCRYPT_FLASH_KEY,      EFUSE_BLK1,    0,     MAX_BLK_LEN,  Flash encrypt. Key. (length = "None" - 256. "3/4" - 192. "REPEAT" - 128)
 ENCRYPT_CONFIG,         EFUSE_BLK0,    188,   4,    Flash encrypt. EFUSE_FLASH_CRYPT_CONFIG_M
 
-DISABLE_DL_ENCRYPT,     EFUSE_BLK0,    199,   1,    Flash encrypt. Disable UART bootloader encryption. EFUSE_DISABLE_DL_ENCRYPT. 
-DISABLE_DL_DECRYPT,     EFUSE_BLK0,    200,   1,    Flash encrypt. Disable UART bootloader decryption. EFUSE_DISABLE_DL_DECRYPT. 
-DISABLE_DL_CACHE,       EFUSE_BLK0,    201,   1,    Flash encrypt. Disable UART bootloader MMU cache. EFUSE_DISABLE_DL_CACHE. 
-DISABLE_JTAG,           EFUSE_BLK0,    198,   1,    Flash encrypt. Disable JTAG. EFUSE_RD_DISABLE_JTAG. 
-CONSOLE_DEBUG_DISABLE,  EFUSE_BLK0,    194,   1,    Flash encrypt. Disable ROM BASIC interpreter fallback. EFUSE_RD_CONSOLE_DEBUG_DISABLE. 
+DISABLE_DL_ENCRYPT,     EFUSE_BLK0,    199,   1,    Flash encrypt. Disable UART bootloader encryption. EFUSE_DISABLE_DL_ENCRYPT.
+DISABLE_DL_DECRYPT,     EFUSE_BLK0,    200,   1,    Flash encrypt. Disable UART bootloader decryption. EFUSE_DISABLE_DL_DECRYPT.
+DISABLE_DL_CACHE,       EFUSE_BLK0,    201,   1,    Flash encrypt. Disable UART bootloader MMU cache. EFUSE_DISABLE_DL_CACHE.
+DISABLE_JTAG,           EFUSE_BLK0,    198,   1,    Flash encrypt. Disable JTAG. EFUSE_RD_DISABLE_JTAG.
+CONSOLE_DEBUG_DISABLE,  EFUSE_BLK0,    194,   1,    Flash encrypt. Disable ROM BASIC interpreter fallback. EFUSE_RD_CONSOLE_DEBUG_DISABLE.
 FLASH_CRYPT_CNT,        EFUSE_BLK0,    20,    7,    Flash encrypt. Flash encryption is enabled if this field has an odd number of bits set. EFUSE_FLASH_CRYPT_CNT.
 
 # Write protection #
@@ -53,7 +53,7 @@ WR_DIS_BLK3,            EFUSE_BLK0,    9,     1,    Write protection for EFUSE_B
 # Read protection #
 ###################
 RD_DIS_BLK1,            EFUSE_BLK0,    16,    1,    Flash encrypt. efuse_key_read_protected. EFUSE_RD_DIS_BLK1
-RD_DIS_BLK2,            EFUSE_BLK0,    17,    1,    Security boot. efuse_key_read_protected. EFUSE_RD_DIS_BLK2  
+RD_DIS_BLK2,            EFUSE_BLK0,    17,    1,    Security boot. efuse_key_read_protected. EFUSE_RD_DIS_BLK2
 RD_DIS_BLK3,            EFUSE_BLK0,    18,    1,    Read protection for EFUSE_BLK3. EFUSE_RD_DIS_BLK3
 
 # Chip info #
@@ -64,6 +64,7 @@ CHIP_VER_PKG,           EFUSE_BLK0,    105,   3,    EFUSE_RD_CHIP_VER_PKG
 CHIP_CPU_FREQ_LOW,      EFUSE_BLK0,    108,   1,    EFUSE_RD_CHIP_CPU_FREQ_LOW
 CHIP_CPU_FREQ_RATED,    EFUSE_BLK0,    109,   1,    EFUSE_RD_CHIP_CPU_FREQ_RATED
 CHIP_VER_REV1,          EFUSE_BLK0,    111,   1,    EFUSE_RD_CHIP_VER_REV1
+CHIP_VER_REV2,          EFUSE_BLK0,    180,   1,    EFUSE_RD_CHIP_VER_REV2
 XPD_SDIO_REG,           EFUSE_BLK0,    142,   1,    EFUSE_RD_XPD_SDIO_REG
 SDIO_TIEH,              EFUSE_BLK0,    143,   1,    EFUSE_RD_SDIO_TIEH
 SDIO_FORCE,             EFUSE_BLK0,    144,   1,    EFUSE_RD_SDIO_FORCE

diff --git a/components/efuse/esp32/include/esp_efuse_table.h b/components/efuse/esp32/include/esp_efuse_table.h
index 807fb08882c8d37465e818be9350a2c4d82fb2b0..a0137c012f3ddc45ac7e23ebe40ca302cce472ac 100644 (file)
--- a/components/efuse/esp32/include/esp_efuse_table.h
+++ b/components/efuse/esp32/include/esp_efuse_table.h
@@ -17,7 +17,7 @@ extern "C" {
 #endif
 
 
-// md5_digest_table 544d434da010ce22f7db1b14d38e1d66
+// md5_digest_table 2e23344575b3d07f01ecb695294e9770
 // This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
 // If you want to change some fields, you need to change esp_efuse_table.csv file
 // then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
@@ -52,6 +52,7 @@ extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_PKG[];
 extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_CPU_FREQ_LOW[];
 extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_CPU_FREQ_RATED[];
 extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_REV1[];
+extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_REV2[];
 extern const esp_efuse_desc_t* ESP_EFUSE_XPD_SDIO_REG[];
 extern const esp_efuse_desc_t* ESP_EFUSE_SDIO_TIEH[];
 extern const esp_efuse_desc_t* ESP_EFUSE_SDIO_FORCE[];

diff --git a/components/efuse/src/esp_efuse_fields.c b/components/efuse/src/esp_efuse_fields.c
index f4f30714cc3dbfbd242fd0a60d7470851bfccaac..d671c3ba6670cc42fdad1e2eb53f9832bdda1725 100644 (file)
--- a/components/efuse/src/esp_efuse_fields.c
+++ b/components/efuse/src/esp_efuse_fields.c
@@ -23,6 +23,7 @@
 #include "esp_log.h"
 #include "soc/efuse_reg.h"
 #include "bootloader_random.h"
+#include "soc/apb_ctrl_reg.h"
 
 const static char *TAG = "efuse";
 
@@ -31,8 +32,29 @@ const static char *TAG = "efuse";
 // Returns chip version from efuse
 uint8_t esp_efuse_get_chip_ver(void)
 {
-    uint8_t chip_ver;
-    esp_efuse_read_field_blob(ESP_EFUSE_CHIP_VER_REV1, &chip_ver, 1);
+    uint8_t eco_bit0, eco_bit1, eco_bit2;
+    esp_efuse_read_field_blob(ESP_EFUSE_CHIP_VER_REV1, &eco_bit0, 1);
+    esp_efuse_read_field_blob(ESP_EFUSE_CHIP_VER_REV2, &eco_bit1, 1);
+    eco_bit2 = (REG_READ(APB_CTRL_DATE_REG) & 80000000) >> 31;
+    uint32_t combine_value = (eco_bit2 << 2) | (eco_bit1 << 1) | eco_bit0;
+    uint8_t chip_ver = 0;
+    switch (combine_value) {
+    case 0:
+        chip_ver = 0;
+        break;
+    case 1:
+        chip_ver = 1;
+        break;
+    case 3:
+        chip_ver = 2;
+        break;
+    case 7:
+        chip_ver = 3;
+        break;
+    default:
+        chip_ver = 0;
+        break;
+    }
     return chip_ver;
 }
 
@@ -111,7 +133,7 @@ void esp_efuse_write_random_key(uint32_t blk_wdata0_reg)
     ESP_LOGV(TAG, "Writing random values to address 0x%08x", blk_wdata0_reg);
     for (int i = 0; i < 8; i++) {
         ESP_LOGV(TAG, "EFUSE_BLKx_WDATA%d_REG = 0x%08x", i, buf[i]);
-        REG_WRITE(blk_wdata0_reg + 4*i, buf[i]);
+        REG_WRITE(blk_wdata0_reg + 4 * i, buf[i]);
     }
     bzero(buf, sizeof(buf));
     bzero(raw, sizeof(raw));

diff --git a/components/esp32/Kconfig b/components/esp32/Kconfig
index 8e1d0c302d1e586959f3efceffcbcd030841bb60..605fd72c91b5e6049ed078903c9cf7a62169ae53 100644 (file)
--- a/components/esp32/Kconfig
+++ b/components/esp32/Kconfig
@@ -6,6 +6,34 @@ menu "ESP32-specific"
         default "y" if IDF_TARGET="esp32"
         default "n"
 
+    choice ESP32_REV_MIN
+        prompt "Minimum Supported ESP32 Revision"
+        default ESP32_REV_MIN_0
+        help
+            Minimum revision that ESP-IDF would support.
+            ESP-IDF performs different strategy on different esp32 revision.
+
+        config ESP32_REV_MIN_0
+            bool "Rev 0"
+        config ESP32_REV_MIN_1
+            bool "Rev 1"
+        config ESP32_REV_MIN_2
+            bool "Rev 2"
+        config ESP32_REV_MIN_3
+            bool "Rev 3"
+    endchoice
+
+    config ESP32_REV_MIN
+        int
+        default 0 if ESP32_REV_MIN_0
+        default 1 if ESP32_REV_MIN_1
+        default 2 if ESP32_REV_MIN_2
+        default 3 if ESP32_REV_MIN_3
+
+    config ESP32_DPORT_WORKAROUND
+        bool
+        default "y" if !FREERTOS_UNICORE  && ESP32_REV_MIN < 2
+
     choice ESP32_DEFAULT_CPU_FREQ_MHZ
         prompt "CPU frequency"
         default ESP32_DEFAULT_CPU_FREQ_160

diff --git a/components/esp32/cpu_start.c b/components/esp32/cpu_start.c
index f18a70ff35f6bbebc8ee91f330528e26211e3760..fd6404cffe8a22efeed564cbec9f2f4875ef2c07 100644 (file)
--- a/components/esp32/cpu_start.c
+++ b/components/esp32/cpu_start.c
@@ -390,6 +390,16 @@ void start_cpu0_default(void)
     spi_flash_init();
     /* init default OS-aware flash access critical section */
     spi_flash_guard_set(&g_flash_guard_default_ops);
+
+    uint8_t revision = esp_efuse_get_chip_ver();
+    ESP_LOGI(TAG, "Chip Revision: %d", revision);
+    if (revision > CONFIG_ESP32_REV_MIN) {
+        ESP_LOGW(TAG, "Chip revision is higher than the one configured in menuconfig. Suggest to upgrade it.");
+    } else if(revision != CONFIG_ESP32_REV_MIN) {
+        ESP_LOGE(TAG, "ESP-IDF can't support this chip revision. Modify minimum supported revision in menuconfig");
+        abort();
+    }
+
 #ifdef CONFIG_PM_ENABLE
     esp_pm_impl_init();
 #ifdef CONFIG_PM_DFS_INIT_AUTO

diff --git a/components/esp32/dport_access.c b/components/esp32/dport_access.c
index 731bdb7ec5461bb67f77589ffb121c55c81fb6e9..42f36c0d864eb5bb7fb63324e0483de9a40c2d98 100644 (file)
--- a/components/esp32/dport_access.c
+++ b/components/esp32/dport_access.c
@@ -16,7 +16,7 @@
  * DPORT access is used for do protection when dual core access DPORT internal register and APB register via DPORT simultaneously
  * This function will be initialize after FreeRTOS startup.
  * When cpu0 want to access DPORT register, it should notify cpu1 enter in high-priority interrupt for be mute. When cpu1 already in high-priority interrupt,
- * cpu0 can access DPORT register. Currently, cpu1 will wait for cpu0 finish access and exit high-priority interrupt. 
+ * cpu0 can access DPORT register. Currently, cpu1 will wait for cpu0 finish access and exit high-priority interrupt.
  */
 
 #include <stdint.h>
@@ -116,7 +116,7 @@ void IRAM_ATTR esp_dport_access_stall_other_cpu_end(void)
 {
 #ifndef CONFIG_FREERTOS_UNICORE
     int cpu_id = xPortGetCoreID();
-    
+
     if (dport_core_state[0] == DPORT_CORE_STATE_IDLE
             || dport_core_state[1] == DPORT_CORE_STATE_IDLE) {
         return;
@@ -249,7 +249,7 @@ void IRAM_ATTR esp_dport_access_read_buffer(uint32_t *buff_out, uint32_t address
  */
 uint32_t IRAM_ATTR esp_dport_access_reg_read(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     uint32_t apb;
@@ -295,7 +295,7 @@ uint32_t IRAM_ATTR esp_dport_access_reg_read(uint32_t reg)
  */
 uint32_t IRAM_ATTR esp_dport_access_sequence_reg_read(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     uint32_t apb;

diff --git a/components/esp32/include/esp_dport_access.h b/components/esp32/include/esp_dport_access.h
index adbb8282012ea4039bc08946d4bb7e7d12abe9ae..4948b1e383992cccfb0525ea1f8fab63dd69dd48 100644 (file)
--- a/components/esp32/include/esp_dport_access.h
+++ b/components/esp32/include/esp_dport_access.h
@@ -33,7 +33,7 @@ uint32_t esp_dport_access_sequence_reg_read(uint32_t reg);
 //only call in case of panic().
 void esp_dport_access_int_abort(void);
 
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
 #define DPORT_STALL_OTHER_CPU_START()
 #define DPORT_STALL_OTHER_CPU_END()
 #define DPORT_INTERRUPT_DISABLE()

diff --git a/components/esp32/system_api.c b/components/esp32/system_api.c
index d8b87847fc20c9a6481fe31b9f870af57b4f7af9..0dc168378e53b69231202e724d90c7a16050ee31 100644 (file)
--- a/components/esp32/system_api.c
+++ b/components/esp32/system_api.c
@@ -205,7 +205,7 @@ esp_err_t esp_read_mac(uint8_t* mac, esp_mac_type_t type)
         ESP_LOGW(TAG, "incorrect mac type");
         break;
     }
-  
+
     return ESP_OK;
 }
 
@@ -296,10 +296,10 @@ void IRAM_ATTR esp_restart_noos()
     WRITE_PERI_REG(GPIO_FUNC5_IN_SEL_CFG_REG, 0x30);
 
     // Reset wifi/bluetooth/ethernet/sdio (bb/mac)
-    DPORT_SET_PERI_REG_MASK(DPORT_CORE_RST_EN_REG, 
+    DPORT_SET_PERI_REG_MASK(DPORT_CORE_RST_EN_REG,
          DPORT_BB_RST | DPORT_FE_RST | DPORT_MAC_RST |
          DPORT_BT_RST | DPORT_BTMAC_RST | DPORT_SDIO_RST |
-         DPORT_SDIO_HOST_RST | DPORT_EMAC_RST | DPORT_MACPWR_RST | 
+         DPORT_SDIO_HOST_RST | DPORT_EMAC_RST | DPORT_MACPWR_RST |
          DPORT_RW_BTMAC_RST | DPORT_RW_BTLP_RST);
     DPORT_REG_WRITE(DPORT_CORE_RST_EN_REG, 0);
 
@@ -355,35 +355,27 @@ const char* esp_get_idf_version(void)
     return IDF_VER;
 }
 
-static void get_chip_info_esp32(esp_chip_info_t* out_info)
+void esp_chip_info(esp_chip_info_t* out_info)
 {
-    uint32_t reg = REG_READ(EFUSE_BLK0_RDATA3_REG);
+    uint32_t efuse_rd3 = REG_READ(EFUSE_BLK0_RDATA3_REG);
     memset(out_info, 0, sizeof(*out_info));
-    
+
     out_info->model = CHIP_ESP32;
-    if ((reg & EFUSE_RD_CHIP_VER_REV1_M) != 0) {
-        out_info->revision = 1;
-    }
-    if ((reg & EFUSE_RD_CHIP_VER_DIS_APP_CPU_M) == 0) {
+    out_info->revision = esp_efuse_get_chip_ver();
+
+    if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_APP_CPU_M) == 0) {
         out_info->cores = 2;
     } else {
         out_info->cores = 1;
     }
     out_info->features = CHIP_FEATURE_WIFI_BGN;
-    if ((reg & EFUSE_RD_CHIP_VER_DIS_BT_M) == 0) {
+    if ((efuse_rd3 & EFUSE_RD_CHIP_VER_DIS_BT_M) == 0) {
         out_info->features |= CHIP_FEATURE_BT | CHIP_FEATURE_BLE;
     }
-    int package = (reg & EFUSE_RD_CHIP_VER_PKG_M) >> EFUSE_RD_CHIP_VER_PKG_S;
+    int package = (efuse_rd3 & EFUSE_RD_CHIP_VER_PKG_M) >> EFUSE_RD_CHIP_VER_PKG_S;
     if (package == EFUSE_RD_CHIP_VER_PKG_ESP32D2WDQ5 ||
         package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD2 ||
         package == EFUSE_RD_CHIP_VER_PKG_ESP32PICOD4) {
         out_info->features |= CHIP_FEATURE_EMB_FLASH;
     }
 }
-
-void esp_chip_info(esp_chip_info_t* out_info)
-{
-    // Only ESP32 is supported now, in the future call one of the
-    // chip-specific functions based on sdkconfig choice
-    return get_chip_info_esp32(out_info);
-}

diff --git a/components/esptool_py/esptool b/components/esptool_py/esptool
index 9ad444a6e06e58833d5e6044c1d5f3eb3dd56023..1a7dbf787e7e504acdeaea074d15a5ccaf87e9e8 160000 (submodule)
--- a/components/esptool_py/esptool
+++ b/components/esptool_py/esptool
@@ -1 +1 @@
-Subproject commit 9ad444a6e06e58833d5e6044c1d5f3eb3dd56023
+Subproject commit 1a7dbf787e7e504acdeaea074d15a5ccaf87e9e8

diff --git a/components/soc/esp32/include/soc/dport_access.h b/components/soc/esp32/include/soc/dport_access.h
index 00e7c83810540f1176c3c7a9d598f43d3eac150f..2639e46ef14f6a23303f90bca0d01b4c30c297ca 100644 (file)
--- a/components/soc/esp32/include/soc/dport_access.h
+++ b/components/soc/esp32/include/soc/dport_access.h
@@ -48,7 +48,7 @@ extern "C" {
 //    After completing read operations, use DPORT_STALL_OTHER_CPU_END().
 //    This method uses stall other CPU while reading DPORT registers.
 //    Useful for compatibility, as well as for large consecutive readings.
-//    This method is slower, but must be used if ROM functions or 
+//    This method is slower, but must be used if ROM functions or
 //    other code is called which accesses DPORT without any other workaround.
 // *) The pre-readable APB register before reading the DPORT register
 //    helps synchronize the operation of the two CPUs,
@@ -73,7 +73,7 @@ extern "C" {
  */
 static inline uint32_t IRAM_ATTR DPORT_REG_READ(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     return esp_dport_access_reg_read(reg);
@@ -106,7 +106,7 @@ static inline uint32_t IRAM_ATTR DPORT_REG_READ(uint32_t reg)
  */
 static inline uint32_t IRAM_ATTR DPORT_SEQUENCE_REG_READ(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     return esp_dport_access_sequence_reg_read(reg);
@@ -166,7 +166,7 @@ static inline uint32_t IRAM_ATTR DPORT_SEQUENCE_REG_READ(uint32_t reg)
  */
 static inline uint32_t IRAM_ATTR DPORT_READ_PERI_REG(uint32_t reg)
 {
-#if defined(BOOTLOADER_BUILD) || defined(CONFIG_FREERTOS_UNICORE) || !defined(ESP_PLATFORM)
+#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
     return _DPORT_REG_READ(reg);
 #else
     return esp_dport_access_reg_read(reg);

diff --git a/components/soc/esp32/include/soc/soc.h b/components/soc/esp32/include/soc/soc.h
index 96dea802324d675c8cdb9983a5b5e418507a3277..d1d468303ccd0d495a203d652f68f85514fcedf2 100644 (file)
--- a/components/soc/esp32/include/soc/soc.h
+++ b/components/soc/esp32/include/soc/soc.h
@@ -147,7 +147,7 @@
 
 #define IS_DPORT_REG(_r) (((_r) >= DR_REG_DPORT_BASE) && (_r) <= DR_REG_DPORT_END)
 
-#if !defined( BOOTLOADER_BUILD ) && !defined( CONFIG_FREERTOS_UNICORE ) && defined( ESP_PLATFORM )
+#if !defined( BOOTLOADER_BUILD ) && defined( CONFIG_ESP32_DPORT_WORKAROUND ) && defined( ESP_PLATFORM )
 #define ASSERT_IF_DPORT_REG(_r, OP)  TRY_STATIC_ASSERT(!IS_DPORT_REG(_r), (Cannot use OP for DPORT registers use DPORT_##OP));
 #else
 #define ASSERT_IF_DPORT_REG(_r, OP)