__doc__ = _realsocket.__doc__
__slots__ = ["_sock",
- "recv", "recv_buf", "recvfrom_buf",
+ "recv", "recv_into", "recvfrom_into",
"send", "sendto", "recvfrom",
"__weakref__"]
self._sock = _sock
self.send = self._sock.send
self.recv = self._sock.recv
- self.recv_buf = self._sock.recv_buf
+ self.recv_into = self._sock.recv_into
self.sendto = self._sock.sendto
self.recvfrom = self._sock.recvfrom
- self.recvfrom_buf = self._sock.recvfrom_buf
+ self.recvfrom_into = self._sock.recvfrom_into
def close(self):
self._sock = _closedsocket()
o = _compile(fmt)
return o.pack(*args)
-def pack_to(fmt, buf, offset, *args):
+def pack_into(fmt, buf, offset, *args):
"""
Pack the values v2, v2, ... according to fmt, write
the packed bytes into the writable buffer buf starting at offset.
o = _cache[fmt]
except KeyError:
o = _compile(fmt)
- return o.pack_to(buf, offset, *args)
+ return o.pack_into(buf, offset, *args)
def unpack(fmt, s):
"""
def __init__(self, methodName='runTest'):
SocketConnectedTest.__init__(self, methodName=methodName)
- def testRecvBuf(self):
+ def testRecvInto(self):
buf = array.array('c', ' '*1024)
- nbytes = self.cli_conn.recv_buf(buf)
+ nbytes = self.cli_conn.recv_into(buf)
self.assertEqual(nbytes, len(MSG))
msg = buf.tostring()[:len(MSG)]
self.assertEqual(msg, MSG)
- def _testRecvBuf(self):
+ def _testRecvInto(self):
buf = buffer(MSG)
self.serv_conn.send(buf)
- def testRecvFromBuf(self):
+ def testRecvFromInto(self):
buf = array.array('c', ' '*1024)
- nbytes, addr = self.cli_conn.recvfrom_buf(buf)
+ nbytes, addr = self.cli_conn.recvfrom_into(buf)
self.assertEqual(nbytes, len(MSG))
msg = buf.tostring()[:len(MSG)]
self.assertEqual(msg, MSG)
- def _testRecvFromBuf(self):
+ def _testRecvFromInto(self):
buf = buffer(MSG)
self.serv_conn.send(buf)
for i in xrange(6, len(test_string) + 1):
simple_err(struct.unpack_from, fmt, data, i)
-def test_pack_to():
+def test_pack_into():
test_string = 'Reykjavik rocks, eow!'
writable_buf = array.array('c', ' '*100)
fmt = '21s'
s = struct.Struct(fmt)
# Test without offset
- s.pack_to(writable_buf, 0, test_string)
+ s.pack_into(writable_buf, 0, test_string)
from_buf = writable_buf.tostring()[:len(test_string)]
assert from_buf == test_string
# Test with offset.
- s.pack_to(writable_buf, 10, test_string)
+ s.pack_into(writable_buf, 10, test_string)
from_buf = writable_buf.tostring()[:len(test_string)+10]
assert from_buf == (test_string[:10] + test_string)
# Go beyond boundaries.
small_buf = array.array('c', ' '*10)
- assertRaises(struct.error, s.pack_to, small_buf, 0, test_string)
- assertRaises(struct.error, s.pack_to, small_buf, 2, test_string)
+ assertRaises(struct.error, s.pack_into, small_buf, 0, test_string)
+ assertRaises(struct.error, s.pack_into, small_buf, 2, test_string)
-def test_pack_to_fn():
+def test_pack_into_fn():
test_string = 'Reykjavik rocks, eow!'
writable_buf = array.array('c', ' '*100)
fmt = '21s'
- pack_to = lambda *args: struct.pack_to(fmt, *args)
+ pack_into = lambda *args: struct.pack_into(fmt, *args)
# Test without offset
- pack_to(writable_buf, 0, test_string)
+ pack_into(writable_buf, 0, test_string)
from_buf = writable_buf.tostring()[:len(test_string)]
assert from_buf == test_string
# Test with offset.
- pack_to(writable_buf, 10, test_string)
+ pack_into(writable_buf, 10, test_string)
from_buf = writable_buf.tostring()[:len(test_string)+10]
assert from_buf == (test_string[:10] + test_string)
# Go beyond boundaries.
small_buf = array.array('c', ' '*10)
- assertRaises(struct.error, pack_to, small_buf, 0, test_string)
- assertRaises(struct.error, pack_to, small_buf, 2, test_string)
+ assertRaises(struct.error, pack_into, small_buf, 0, test_string)
+ assertRaises(struct.error, pack_into, small_buf, 2, test_string)
# Test methods to pack and unpack from buffers rather than strings.
test_unpack_from()
-test_pack_to()
-test_pack_to_fn()
+test_pack_into()
+test_pack_into_fn()
soself = (PyStructObject *)self;
assert(PyStruct_Check(self));
assert(soself->s_codes != NULL);
- if (args == NULL || !PyTuple_Check(args) ||
- PyTuple_GET_SIZE(args) != soself->s_len)
+ if (PyTuple_GET_SIZE(args) != soself->s_len)
{
PyErr_Format(StructError,
"pack requires exactly %zd arguments", soself->s_len);
return result;
}
-PyDoc_STRVAR(s_pack_to__doc__,
-"S.pack_to(buffer, offset, v1, v2, ...)\n\
+PyDoc_STRVAR(s_pack_into__doc__,
+"S.pack_into(buffer, offset, v1, v2, ...)\n\
\n\
-Pack the values v2, v2, ... according to this Struct's format, write \n\
+Pack the values v1, v2, ... according to this Struct's format, write \n\
the packed bytes into the writable buffer buf starting at offset. Note\n\
that the offset is not an optional argument. See struct.__doc__ for \n\
more on format strings.");
static PyObject *
-s_pack_to(PyObject *self, PyObject *args)
+s_pack_into(PyObject *self, PyObject *args)
{
PyStructObject *soself;
char *buffer;
soself = (PyStructObject *)self;
assert(PyStruct_Check(self));
assert(soself->s_codes != NULL);
- if (args == NULL || !PyTuple_Check(args) ||
- PyTuple_GET_SIZE(args) != (soself->s_len + 2))
+ if (PyTuple_GET_SIZE(args) != (soself->s_len + 2))
{
PyErr_Format(StructError,
- "pack_to requires exactly %zd arguments",
+ "pack_into requires exactly %zd arguments",
(soself->s_len + 2));
return NULL;
}
assert( buffer_len >= 0 );
/* Extract the offset from the first argument */
- offset = PyInt_AsLong(PyTuple_GET_ITEM(args, 1));
+ offset = PyInt_AsSsize_t(PyTuple_GET_ITEM(args, 1));
/* Support negative offsets. */
if (offset < 0)
/* Check boundaries */
if (offset < 0 || (buffer_len - offset) < soself->s_size) {
PyErr_Format(StructError,
- "pack_to requires a buffer of at least %zd bytes",
+ "pack_into requires a buffer of at least %zd bytes",
soself->s_size);
return NULL;
}
/* List of functions */
static struct PyMethodDef s_methods[] = {
- {"pack", (PyCFunction)s_pack, METH_VARARGS, s_pack__doc__},
- {"pack_to", (PyCFunction)s_pack_to, METH_VARARGS, s_pack_to__doc__},
- {"unpack", (PyCFunction)s_unpack, METH_O, s_unpack__doc__},
- {"unpack_from", (PyCFunction)s_unpack_from, METH_KEYWORDS, s_unpack_from__doc__},
+ {"pack", s_pack, METH_VARARGS, s_pack__doc__},
+ {"pack_into", s_pack_into, METH_VARARGS, s_pack_into__doc__},
+ {"unpack", s_unpack, METH_O, s_unpack__doc__},
+ {"unpack_from", s_unpack_from, METH_KEYWORDS, s_unpack_from__doc__},
{NULL, NULL} /* sentinel */
};
listen(n) -- start listening for incoming connections\n\
makefile([mode, [bufsize]]) -- return a file object for the socket [*]\n\
recv(buflen[, flags]) -- receive data\n\
-recv_buf(buffer[, nbytes[, flags]]) -- receive data (into a buffer)\n\
+recv_into(buffer[, nbytes[, flags]]) -- receive data (into a buffer)\n\
recvfrom(buflen[, flags]) -- receive data and sender\'s address\n\
-recvfrom_buf(buffer[, nbytes, [, flags])\n\
+recvfrom_into(buffer[, nbytes, [, flags])\n\
-- receive data and sender\'s address (into a buffer)\n\
sendall(data[, flags]) -- send all data\n\
send(data[, flags]) -- send data, may not send all of it\n\
#endif /* NO_DUP */
/*
- * This is the guts of the recv() and recv_buf() methods, which reads into a
+ * This is the guts of the recv() and recv_into() methods, which reads into a
* char buffer. If you have any inc/def ref to do to the objects that contain
* the buffer, do it in the caller. This function returns the number of bytes
* succesfully read. If there was an error, it returns -1. Note that it is
* also possible that we return a number of bytes smaller than the request
* bytes.
*/
-static int
+static ssize_t
sock_recv_guts(PySocketSockObject *s, char* cbuf, int len, int flags)
{
- int timeout, outlen = 0;
+ ssize_t outlen = 0;
+ int timeout;
#ifdef __VMS
int remaining, nread;
char *read_buf;
static PyObject *
sock_recv(PySocketSockObject *s, PyObject *args)
{
- int recvlen, flags = 0, outlen;
+ int recvlen, flags = 0;
+ ssize_t outlen;
PyObject *buf;
if (!PyArg_ParseTuple(args, "i|i:recv", &recvlen, &flags))
return NULL;
/* Call the guts */
- outlen = sock_recv_guts(s, PyString_AsString(buf), recvlen, flags);
+ outlen = sock_recv_guts(s, PyString_AS_STRING(buf), recvlen, flags);
if (outlen < 0) {
/* An error occured, release the string and return an
error. */
the remote end is closed and all data is read, return the empty string.");
-/* s.recv_buf(buffer, [nbytes [,flags]]) method */
+/* s.recv_into(buffer, [nbytes [,flags]]) method */
static PyObject*
-sock_recv_buf(PySocketSockObject *s, PyObject *args, PyObject *kwds)
+sock_recv_into(PySocketSockObject *s, PyObject *args, PyObject *kwds)
{
static char *kwlist[] = {"buffer", "nbytes", "flags", 0};
- int recvlen = 0, flags = 0, readlen;
+ int recvlen = 0, flags = 0;
+ ssize_t readlen;
char *buf;
int buflen;
/* Get the buffer's memory */
- if (!PyArg_ParseTupleAndKeywords(args, kwds, "s#|ii:recv", kwlist,
+ if (!PyArg_ParseTupleAndKeywords(args, kwds, "w#|ii:recv", kwlist,
&buf, &buflen, &recvlen, &flags))
return NULL;
assert(buf != 0 && buflen > 0);
/* Return the number of bytes read. Note that we do not do anything
special here in the case that readlen < recvlen. */
- return PyInt_FromLong(readlen);
+ return PyInt_FromSsize_t(readlen);
}
-PyDoc_STRVAR(recv_buf_doc,
-"recv_buf(buffer, [nbytes[, flags]]) -> nbytes_read\n\
+PyDoc_STRVAR(recv_into_doc,
+"recv_into(buffer, [nbytes[, flags]]) -> nbytes_read\n\
\n\
A version of recv() that stores its data into a buffer rather than creating \n\
a new string. Receive up to buffersize bytes from the socket. If buffersize \n\
/*
- * This is the guts of the recv() and recv_buf() methods, which reads into a
+ * This is the guts of the recv() and recv_into() methods, which reads into a
* char buffer. If you have any inc/def ref to do to the objects that contain
* the buffer, do it in the caller. This function returns the number of bytes
* succesfully read. If there was an error, it returns -1. Note that it is
* 'addr' is a return value for the address object. Note that you must decref
* it yourself.
*/
-static int
+static ssize_t
sock_recvfrom_guts(PySocketSockObject *s, char* cbuf, int len, int flags,
PyObject** addr)
{
sock_addr_t addrbuf;
- int n = 0, timeout;
+ int timeout;
+ ssize_t n = 0;
socklen_t addrlen;
*addr = NULL;
PyObject *buf = NULL;
PyObject *addr = NULL;
PyObject *ret = NULL;
- int recvlen, outlen, flags = 0;
+ int recvlen, flags = 0;
+ ssize_t outlen;
if (!PyArg_ParseTuple(args, "i|i:recvfrom", &recvlen, &flags))
return NULL;
Like recv(buffersize, flags) but also return the sender's address info.");
-/* s.recvfrom_buf(buffer[, nbytes [,flags]]) method */
+/* s.recvfrom_into(buffer[, nbytes [,flags]]) method */
static PyObject *
-sock_recvfrom_buf(PySocketSockObject *s, PyObject *args, PyObject* kwds)
+sock_recvfrom_into(PySocketSockObject *s, PyObject *args, PyObject* kwds)
{
static char *kwlist[] = {"buffer", "nbytes", "flags", 0};
- int recvlen = 0, flags = 0, readlen;
+ int recvlen = 0, flags = 0;
+ ssize_t readlen;
char *buf;
int buflen;
PyObject *addr = NULL;
PyObject *ret = NULL;
- if (!PyArg_ParseTupleAndKeywords(args, kwds, "s#|ii:recvfrom", kwlist,
+ if (!PyArg_ParseTupleAndKeywords(args, kwds, "w#|ii:recvfrom", kwlist,
&buf, &buflen, &recvlen, &flags))
return NULL;
assert(buf != 0 && buflen > 0);
readlen = sock_recvfrom_guts(s, buf, recvlen, flags, &addr);
if (readlen < 0) {
/* Return an error */
- goto finally;
+ Py_XDECREF(addr);
+ return NULL;
}
/* Return the number of bytes read and the address. Note that we do
not do anything special here in the case that readlen < recvlen. */
- ret = Py_BuildValue("lO", readlen, addr);
-
-finally:
- Py_XDECREF(addr);
- return ret;
+ return Py_BuildValue("lO", readlen, addr);
}
-PyDoc_STRVAR(recvfrom_buf_doc,
-"recvfrom_buf(buffer[, nbytes[, flags]]) -> (nbytes, address info)\n\
+PyDoc_STRVAR(recvfrom_into_doc,
+"recvfrom_into(buffer[, nbytes[, flags]]) -> (nbytes, address info)\n\
\n\
-Like recv_buf(buffer[, nbytes[, flags]]) but also return the sender's address info.");
+Like recv_into(buffer[, nbytes[, flags]]) but also return the sender's address info.");
/* s.send(data [,flags]) method */
#endif
{"recv", (PyCFunction)sock_recv, METH_VARARGS,
recv_doc},
- {"recv_buf", (PyCFunction)sock_recv_buf, METH_VARARGS | METH_KEYWORDS,
- recv_buf_doc},
+ {"recv_into", (PyCFunction)sock_recv_into, METH_VARARGS | METH_KEYWORDS,
+ recv_into_doc},
{"recvfrom", (PyCFunction)sock_recvfrom, METH_VARARGS,
recvfrom_doc},
- {"recvfrom_buf", (PyCFunction)sock_recvfrom_buf, METH_VARARGS | METH_KEYWORDS,
- recvfrom_buf_doc},
+ {"recvfrom_into", (PyCFunction)sock_recvfrom_into, METH_VARARGS | METH_KEYWORDS,
+ recvfrom_into_doc},
{"send", (PyCFunction)sock_send, METH_VARARGS,
send_doc},
{"sendall", (PyCFunction)sock_sendall, METH_VARARGS,
projects / python / commitdiff