#! /bin/sh
-# From configure.in Revision: 1.156
+# From configure.in Revision: 1.157
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.14.1
signal.h stdarg.h stddef.h stdlib.h thread.h unistd.h utime.h \
sys/audioio.h sys/file.h sys/lock.h db_185.h db.h \
sys/param.h sys/select.h sys/socket.h sys/time.h sys/times.h \
-sys/un.h sys/utsname.h sys/wait.h pty.h libutil.h ndbm.h gdbm/ndbm.h
+sys/un.h sys/utsname.h sys/wait.h pty.h libutil.h \
+ndbm.h db1/ndbm.h gdbm/ndbm.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1550: checking for $ac_hdr" >&5
+echo "configure:1551: checking for $ac_hdr" >&5
if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1555 "configure"
+#line 1556 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1560: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1561: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
-echo "configure:1591: checking for $ac_hdr that defines DIR" >&5
+echo "configure:1592: checking for $ac_hdr that defines DIR" >&5
if eval "test \"\${ac_cv_header_dirent_$ac_safe+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1596 "configure"
+#line 1597 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
DIR *dirp = 0;
; return 0; }
EOF
-if { (eval echo configure:1604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1605: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6
-echo "configure:1629: checking for opendir in -ldir" >&5
+echo "configure:1630: checking for opendir in -ldir" >&5
ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1637 "configure"
+#line 1638 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1649: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6
-echo "configure:1670: checking for opendir in -lx" >&5
+echo "configure:1671: checking for opendir in -lx" >&5
ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1678 "configure"
+#line 1679 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
opendir()
; return 0; }
EOF
-if { (eval echo configure:1689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# checks for typedefs
was_it_defined=no
echo $ac_n "checking for clock_t in time.h""... $ac_c" 1>&6
-echo "configure:1715: checking for clock_t in time.h" >&5
+echo "configure:1716: checking for clock_t in time.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 1717 "configure"
+#line 1718 "configure"
#include "confdefs.h"
#include <time.h>
EOF
# Type availability checks
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
-echo "configure:1745: checking for mode_t" >&5
+echo "configure:1746: checking for mode_t" >&5
if eval "test \"\${ac_cv_type_mode_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1750 "configure"
+#line 1751 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:1780: checking for off_t" >&5
+echo "configure:1781: checking for off_t" >&5
if eval "test \"\${ac_cv_type_off_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1785 "configure"
+#line 1786 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:1815: checking for pid_t" >&5
+echo "configure:1816: checking for pid_t" >&5
if eval "test \"\${ac_cv_type_pid_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1820 "configure"
+#line 1821 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1850: checking return type of signal handlers" >&5
+echo "configure:1851: checking return type of signal handlers" >&5
if eval "test \"\${ac_cv_type_signal+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1855 "configure"
+#line 1856 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:1872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1873: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1891: checking for size_t" >&5
+echo "configure:1892: checking for size_t" >&5
if eval "test \"\${ac_cv_type_size_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1896 "configure"
+#line 1897 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
-echo "configure:1926: checking for uid_t in sys/types.h" >&5
+echo "configure:1927: checking for uid_t in sys/types.h" >&5
if eval "test \"\${ac_cv_type_uid_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1931 "configure"
+#line 1932 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
# Sizes of various common basic types
echo $ac_n "checking size of int""... $ac_c" 1>&6
-echo "configure:1962: checking size of int" >&5
+echo "configure:1963: checking size of int" >&5
if eval "test \"\${ac_cv_sizeof_int+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 1970 "configure"
+#line 1971 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:1981: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1982: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_int=`cat conftestval`
else
echo $ac_n "checking size of long""... $ac_c" 1>&6
-echo "configure:2001: checking size of long" >&5
+echo "configure:2002: checking size of long" >&5
if eval "test \"\${ac_cv_sizeof_long+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2009 "configure"
+#line 2010 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2020: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long=`cat conftestval`
else
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:2040: checking size of void *" >&5
+echo "configure:2041: checking size of void *" >&5
if eval "test \"\${ac_cv_sizeof_void_p+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2048 "configure"
+#line 2049 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_void_p=`cat conftestval`
else
echo $ac_n "checking size of char""... $ac_c" 1>&6
-echo "configure:2079: checking size of char" >&5
+echo "configure:2080: checking size of char" >&5
if eval "test \"\${ac_cv_sizeof_char+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2087 "configure"
+#line 2088 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_char=`cat conftestval`
else
echo $ac_n "checking size of short""... $ac_c" 1>&6
-echo "configure:2118: checking size of short" >&5
+echo "configure:2119: checking size of short" >&5
if eval "test \"\${ac_cv_sizeof_short+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2126 "configure"
+#line 2127 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2137: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2138: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_short=`cat conftestval`
else
echo $ac_n "checking size of float""... $ac_c" 1>&6
-echo "configure:2157: checking size of float" >&5
+echo "configure:2158: checking size of float" >&5
if eval "test \"\${ac_cv_sizeof_float+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2165 "configure"
+#line 2166 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2176: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_float=`cat conftestval`
else
echo $ac_n "checking size of double""... $ac_c" 1>&6
-echo "configure:2196: checking size of double" >&5
+echo "configure:2197: checking size of double" >&5
if eval "test \"\${ac_cv_sizeof_double+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2204 "configure"
+#line 2205 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2215: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_double=`cat conftestval`
else
echo $ac_n "checking size of fpos_t""... $ac_c" 1>&6
-echo "configure:2235: checking size of fpos_t" >&5
+echo "configure:2236: checking size of fpos_t" >&5
if eval "test \"\${ac_cv_sizeof_fpos_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2243 "configure"
+#line 2244 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_fpos_t=`cat conftestval`
else
echo $ac_n "checking for long long support""... $ac_c" 1>&6
-echo "configure:2275: checking for long long support" >&5
+echo "configure:2276: checking for long long support" >&5
have_long_long=no
cat > conftest.$ac_ext <<EOF
-#line 2278 "configure"
+#line 2279 "configure"
#include "confdefs.h"
int main() {
long long x; x = (long long)0;
; return 0; }
EOF
-if { (eval echo configure:2285: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_LONG_LONG 1
echo "$ac_t""$have_long_long" 1>&6
if test "$have_long_long" = yes ; then
echo $ac_n "checking size of long long""... $ac_c" 1>&6
-echo "configure:2299: checking size of long long" >&5
+echo "configure:2300: checking size of long long" >&5
if eval "test \"\${ac_cv_sizeof_long_long+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2307 "configure"
+#line 2308 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_long_long=`cat conftestval`
else
fi
echo $ac_n "checking for uintptr_t support""... $ac_c" 1>&6
-echo "configure:2340: checking for uintptr_t support" >&5
+echo "configure:2341: checking for uintptr_t support" >&5
have_uintptr_t=no
cat > conftest.$ac_ext <<EOF
-#line 2343 "configure"
+#line 2344 "configure"
#include "confdefs.h"
int main() {
uintptr_t x; x = (uintptr_t)0;
; return 0; }
EOF
-if { (eval echo configure:2350: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2351: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_UINTPTR_T 1
echo "$ac_t""$have_uintptr_t" 1>&6
if test "$have_uintptr_t" = yes ; then
echo $ac_n "checking size of uintptr_t""... $ac_c" 1>&6
-echo "configure:2364: checking size of uintptr_t" >&5
+echo "configure:2365: checking size of uintptr_t" >&5
if eval "test \"\${ac_cv_sizeof_uintptr_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2372 "configure"
+#line 2373 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:2383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_uintptr_t=`cat conftestval`
else
# Hmph. AC_CHECK_SIZEOF() doesn't include <sys/types.h>.
echo $ac_n "checking size of off_t""... $ac_c" 1>&6
-echo "configure:2406: checking size of off_t" >&5
+echo "configure:2407: checking size of off_t" >&5
if eval "test \"\${ac_cv_sizeof_off_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2414 "configure"
+#line 2415 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <sys/types.h>
exit(0);
}
EOF
-if { (eval echo configure:2426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_off_t=`cat conftestval`
else
echo $ac_n "checking whether to enable large file support""... $ac_c" 1>&6
-echo "configure:2448: checking whether to enable large file support" >&5
+echo "configure:2449: checking whether to enable large file support" >&5
if test "$have_long_long" = yes -a \
"$ac_cv_sizeof_off_t" -gt "$ac_cv_sizeof_long" -a \
"$ac_cv_sizeof_long_long" -ge "$ac_cv_sizeof_off_t"; then
# AC_CHECK_SIZEOF() doesn't include <time.h>.
echo $ac_n "checking size of time_t""... $ac_c" 1>&6
-echo "configure:2463: checking size of time_t" >&5
+echo "configure:2464: checking size of time_t" >&5
if eval "test \"\${ac_cv_sizeof_time_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2471 "configure"
+#line 2472 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <time.h>
exit(0);
}
EOF
-if { (eval echo configure:2483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2484: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_time_t=`cat conftestval`
else
# if have pthread_t then define SIZEOF_PTHREAD_T
echo $ac_n "checking for pthread_t""... $ac_c" 1>&6
-echo "configure:2507: checking for pthread_t" >&5
+echo "configure:2508: checking for pthread_t" >&5
have_pthread_t=no
cat > conftest.$ac_ext <<EOF
-#line 2510 "configure"
+#line 2511 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
pthread_t x; x = (pthread_t)0;
; return 0; }
EOF
-if { (eval echo configure:2517: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2518: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
have_pthread_t=yes
else
if test "$have_pthread_t" = yes ; then
# AC_CHECK_SIZEOF() doesn't include <pthread.h>.
echo $ac_n "checking size of pthread_t""... $ac_c" 1>&6
-echo "configure:2529: checking size of pthread_t" >&5
+echo "configure:2530: checking size of pthread_t" >&5
if eval "test \"\${ac_cv_sizeof_pthread_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 2537 "configure"
+#line 2538 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <pthread.h>
exit(0);
}
EOF
-if { (eval echo configure:2549: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2550: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_pthread_t=`cat conftestval`
else
esac
echo $ac_n "checking for --with-next-framework""... $ac_c" 1>&6
-echo "configure:2584: checking for --with-next-framework" >&5
+echo "configure:2585: checking for --with-next-framework" >&5
if test "$with_next_framework"
then
OPT="$OPT -fno-common"
fi
echo $ac_n "checking for --with-dyld""... $ac_c" 1>&6
-echo "configure:2601: checking for --with-dyld" >&5
+echo "configure:2602: checking for --with-dyld" >&5
if test "$with_next_framework" -o "$with_dyld"
then
if test "$with_dyld"
# SO is the extension of shared libraries `(including the dot!)
# -- usually .so, .sl on HP-UX
echo $ac_n "checking SO""... $ac_c" 1>&6
-echo "configure:2627: checking SO" >&5
+echo "configure:2628: checking SO" >&5
if test -z "$SO"
then
case $ac_sys_system in
# (Shared libraries in this instance are shared modules to be loaded into
# Python, as opposed to building Python itself as a shared library.)
echo $ac_n "checking LDSHARED""... $ac_c" 1>&6
-echo "configure:2641: checking LDSHARED" >&5
+echo "configure:2642: checking LDSHARED" >&5
if test -z "$LDSHARED"
then
case $ac_sys_system/$ac_sys_release in
# CCSHARED are the C *flags* used to create objects to go into a shared
# library (module) -- this is only needed for a few systems
echo $ac_n "checking CCSHARED""... $ac_c" 1>&6
-echo "configure:2693: checking CCSHARED" >&5
+echo "configure:2694: checking CCSHARED" >&5
if test -z "$CCSHARED"
then
case $ac_sys_system/$ac_sys_release in
# LINKFORSHARED are the flags passed to the $(CC) command that links
# the python executable -- this is only needed for a few systems
echo $ac_n "checking LINKFORSHARED""... $ac_c" 1>&6
-echo "configure:2717: checking LINKFORSHARED" >&5
+echo "configure:2718: checking LINKFORSHARED" >&5
if test -z "$LINKFORSHARED"
then
case $ac_sys_system/$ac_sys_release in
# checks for libraries
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2752: checking for dlopen in -ldl" >&5
+echo "configure:2753: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2760 "configure"
+#line 2761 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:2771: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
# Dynamic linking for SunOS/Solaris and SYSV
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "configure:2799: checking for shl_load in -ldld" >&5
+echo "configure:2800: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2807 "configure"
+#line 2808 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shl_load()
; return 0; }
EOF
-if { (eval echo configure:2818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Check for --with-pydebug
echo $ac_n "checking for --with-pydebug""... $ac_c" 1>&6
-echo "configure:2848: checking for --with-pydebug" >&5
+echo "configure:2849: checking for --with-pydebug" >&5
# Check whether --with-pydebug or --without-pydebug was given.
if test "${with_pydebug+set}" = set; then
withval="$with_pydebug"
# checks for system dependent C++ extensions support
case "$ac_sys_system" in
AIX*) echo $ac_n "checking for genuine AIX C++ extensions support""... $ac_c" 1>&6
-echo "configure:2868: checking for genuine AIX C++ extensions support" >&5
+echo "configure:2869: checking for genuine AIX C++ extensions support" >&5
cat > conftest.$ac_ext <<EOF
-#line 2870 "configure"
+#line 2871 "configure"
#include "confdefs.h"
#include "/usr/lpp/xlC/include/load.h"
int main() {
loadAndInit("", 0, "")
; return 0; }
EOF
-if { (eval echo configure:2877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define AIX_GENUINE_CPLUSPLUS 1
IRIX*) ;;
*)
echo $ac_n "checking for t_open in -lnsl""... $ac_c" 1>&6
-echo "configure:2901: checking for t_open in -lnsl" >&5
+echo "configure:2902: checking for t_open in -lnsl" >&5
ac_lib_var=`echo nsl'_'t_open | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2909 "configure"
+#line 2910 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
t_open()
; return 0; }
EOF
-if { (eval echo configure:2920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
# SVR4
echo $ac_n "checking for socket in -lsocket""... $ac_c" 1>&6
-echo "configure:2941: checking for socket in -lsocket" >&5
+echo "configure:2942: checking for socket in -lsocket" >&5
ac_lib_var=`echo socket'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2949 "configure"
+#line 2950 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:2960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
case "$ac_sys_system" in
BeOS*)
echo $ac_n "checking for socket in -lnet""... $ac_c" 1>&6
-echo "configure:2985: checking for socket in -lnet" >&5
+echo "configure:2986: checking for socket in -lnet" >&5
ac_lib_var=`echo net'_'socket | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnet $LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2993 "configure"
+#line 2994 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
socket()
; return 0; }
EOF
-if { (eval echo configure:3004: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
esac
echo $ac_n "checking for --with-libs""... $ac_c" 1>&6
-echo "configure:3028: checking for --with-libs" >&5
+echo "configure:3029: checking for --with-libs" >&5
# Check whether --with-libs or --without-libs was given.
if test "${with_libs+set}" = set; then
withval="$with_libs"
USE_THREAD_MODULE=""
echo $ac_n "checking for --with-dec-threads""... $ac_c" 1>&6
-echo "configure:3045: checking for --with-dec-threads" >&5
+echo "configure:3046: checking for --with-dec-threads" >&5
# Check whether --with-dec-threads or --without-dec-threads was given.
if test "${with_dec_threads+set}" = set; then
echo $ac_n "checking for --with-threads""... $ac_c" 1>&6
-echo "configure:3062: checking for --with-threads" >&5
+echo "configure:3063: checking for --with-threads" >&5
# Check whether --with-threads or --without-threads was given.
if test "${with_threads+set}" = set; then
withval="$with_threads"
ac_safe=`echo "mach/cthreads.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for mach/cthreads.h""... $ac_c" 1>&6
-echo "configure:3100: checking for mach/cthreads.h" >&5
+echo "configure:3101: checking for mach/cthreads.h" >&5
if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3105 "configure"
+#line 3106 "configure"
#include "confdefs.h"
#include <mach/cthreads.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3110: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6
-echo "configure:3139: checking for pthread_create in -lpthread" >&5
+echo "configure:3140: checking for pthread_create in -lpthread" >&5
ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3147 "configure"
+#line 3148 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_detach""... $ac_c" 1>&6
-echo "configure:3187: checking for pthread_detach" >&5
+echo "configure:3188: checking for pthread_detach" >&5
if eval "test \"\${ac_cv_func_pthread_detach+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3192 "configure"
+#line 3193 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char pthread_detach(); below. */
; return 0; }
EOF
-if { (eval echo configure:3216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_pthread_detach=yes"
else
ac_safe=`echo "kernel/OS.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for kernel/OS.h""... $ac_c" 1>&6
-echo "configure:3244: checking for kernel/OS.h" >&5
+echo "configure:3245: checking for kernel/OS.h" >&5
if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3249 "configure"
+#line 3250 "configure"
#include "confdefs.h"
#include <kernel/OS.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3254: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3255: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6
-echo "configure:3283: checking for pthread_create in -lpthreads" >&5
+echo "configure:3284: checking for pthread_create in -lpthreads" >&5
ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthreads $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3291 "configure"
+#line 3292 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lc_r""... $ac_c" 1>&6
-echo "configure:3331: checking for pthread_create in -lc_r" >&5
+echo "configure:3332: checking for pthread_create in -lc_r" >&5
ac_lib_var=`echo c_r'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lc_r $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3339 "configure"
+#line 3340 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __d6_pthread_create in -lthread""... $ac_c" 1>&6
-echo "configure:3379: checking for __d6_pthread_create in -lthread" >&5
+echo "configure:3380: checking for __d6_pthread_create in -lthread" >&5
ac_lib_var=`echo thread'_'__d6_pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3387 "configure"
+#line 3388 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
__d6_pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3399: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pth_init in -lpth""... $ac_c" 1>&6
-echo "configure:3427: checking for pth_init in -lpth" >&5
+echo "configure:3428: checking for pth_init in -lpth" >&5
ac_lib_var=`echo pth'_'pth_init | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpth $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3435 "configure"
+#line 3436 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pth_init()
; return 0; }
EOF
-if { (eval echo configure:3446: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for pthread_create in -lcma""... $ac_c" 1>&6
-echo "configure:3475: checking for pthread_create in -lcma" >&5
+echo "configure:3476: checking for pthread_create in -lcma" >&5
ac_lib_var=`echo cma'_'pthread_create | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcma $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3483 "configure"
+#line 3484 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
pthread_create()
; return 0; }
EOF
-if { (eval echo configure:3494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for usconfig in -lmpc""... $ac_c" 1>&6
-echo "configure:3544: checking for usconfig in -lmpc" >&5
+echo "configure:3545: checking for usconfig in -lmpc" >&5
ac_lib_var=`echo mpc'_'usconfig | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmpc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3552 "configure"
+#line 3553 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
usconfig()
; return 0; }
EOF
-if { (eval echo configure:3563: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3564: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for thr_create in -lthread""... $ac_c" 1>&6
-echo "configure:3590: checking for thr_create in -lthread" >&5
+echo "configure:3591: checking for thr_create in -lthread" >&5
ac_lib_var=`echo thread'_'thr_create | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3598 "configure"
+#line 3599 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
thr_create()
; return 0; }
EOF
-if { (eval echo configure:3609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
USE_GC_MODULE=""
echo $ac_n "checking for --with-cycle-gc""... $ac_c" 1>&6
-echo "configure:3641: checking for --with-cycle-gc" >&5
+echo "configure:3642: checking for --with-cycle-gc" >&5
# Check whether --with-cycle-gc or --without-cycle-gc was given.
if test "${with_cycle_gc+set}" = set; then
withval="$with_cycle_gc"
USE_BSDDB_MODULE=""
echo $ac_n "checking for --with-libdb""... $ac_c" 1>&6
-echo "configure:3668: checking for --with-libdb" >&5
+echo "configure:3669: checking for --with-libdb" >&5
# Check whether --with-libdb or --without-libdb was given.
if test "${with_libdb+set}" = set; then
withval="$with_libdb"
# check for libdb; BSD systems have the DB routines in libc --tg
echo $ac_n "checking for dbopen""... $ac_c" 1>&6
-echo "configure:3707: checking for dbopen" >&5
+echo "configure:3708: checking for dbopen" >&5
if eval "test \"\${ac_cv_func_dbopen+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3712 "configure"
+#line 3713 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dbopen(); below. */
; return 0; }
EOF
-if { (eval echo configure:3736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dbopen=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dbopen in -ldb""... $ac_c" 1>&6
-echo "configure:3754: checking for dbopen in -ldb" >&5
+echo "configure:3755: checking for dbopen in -ldb" >&5
ac_lib_var=`echo db'_'dbopen | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldb $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3762 "configure"
+#line 3763 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dbopen()
; return 0; }
EOF
-if { (eval echo configure:3773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Check for --with-wctype-functions
echo $ac_n "checking for --with-wctype-functions""... $ac_c" 1>&6
-echo "configure:3799: checking for --with-wctype-functions" >&5
+echo "configure:3800: checking for --with-wctype-functions" >&5
# Check whether --with-wctype-functions or --without-wctype-functions was given.
if test "${with_wctype_functions+set}" = set; then
withval="$with_wctype_functions"
DLINCLDIR=/
echo $ac_n "checking for --with-sgi-dl""... $ac_c" 1>&6
-echo "configure:3821: checking for --with-sgi-dl" >&5
+echo "configure:3822: checking for --with-sgi-dl" >&5
# Check whether --with-sgi-dl or --without-sgi-dl was given.
if test "${with_sgi_dl+set}" = set; then
withval="$with_sgi_dl"
echo $ac_n "checking for --with-dl-dld""... $ac_c" 1>&6
-echo "configure:3845: checking for --with-dl-dld" >&5
+echo "configure:3846: checking for --with-dl-dld" >&5
# Check whether --with-dl-dld or --without-dl-dld was given.
if test "${with_dl_dld+set}" = set; then
withval="$with_dl_dld"
for ac_func in dlopen
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3874: checking for $ac_func" >&5
+echo "configure:3875: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3879 "configure"
+#line 3880 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3904: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# loading of modules.
echo $ac_n "checking DYNLOADFILE""... $ac_c" 1>&6
-echo "configure:3932: checking DYNLOADFILE" >&5
+echo "configure:3933: checking DYNLOADFILE" >&5
if test -z "$DYNLOADFILE"
then
case $ac_sys_system/$ac_sys_release in
truncate uname waitpid _getpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3973: checking for $ac_func" >&5
+echo "configure:3974: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3978 "configure"
+#line 3979 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4002: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4003: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in openpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4032: checking for $ac_func" >&5
+echo "configure:4033: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4037 "configure"
+#line 4038 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4061: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for openpty in -lutil""... $ac_c" 1>&6
-echo "configure:4083: checking for openpty in -lutil" >&5
+echo "configure:4084: checking for openpty in -lutil" >&5
ac_lib_var=`echo util'_'openpty | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4091 "configure"
+#line 4092 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
openpty()
; return 0; }
EOF
-if { (eval echo configure:4102: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in forkpty
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4131: checking for $ac_func" >&5
+echo "configure:4132: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4136 "configure"
+#line 4137 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4161: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for forkpty in -lutil""... $ac_c" 1>&6
-echo "configure:4182: checking for forkpty in -lutil" >&5
+echo "configure:4183: checking for forkpty in -lutil" >&5
ac_lib_var=`echo util'_'forkpty | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4190 "configure"
+#line 4191 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
forkpty()
; return 0; }
EOF
-if { (eval echo configure:4201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4202: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in fseek64 fseeko fstatvfs ftell64 ftello statvfs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4232: checking for $ac_func" >&5
+echo "configure:4233: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4237 "configure"
+#line 4238 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4262: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in dup2 getcwd strdup strerror memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4289: checking for $ac_func" >&5
+echo "configure:4290: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4294 "configure"
+#line 4295 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in getpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4347: checking for $ac_func" >&5
+echo "configure:4348: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4352 "configure"
+#line 4353 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4376: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 4395 "configure"
+#line 4396 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
getpgrp(0);
; return 0; }
EOF
-if { (eval echo configure:4402: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4403: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define GETPGRP_HAVE_ARG 1
for ac_func in setpgrp
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4421: checking for $ac_func" >&5
+echo "configure:4422: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4426 "configure"
+#line 4427 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 4469 "configure"
+#line 4470 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
setpgrp(0,0);
; return 0; }
EOF
-if { (eval echo configure:4476: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4477: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SETPGRP_HAVE_ARG 1
for ac_func in gettimeofday
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4495: checking for $ac_func" >&5
+echo "configure:4496: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4500 "configure"
+#line 4501 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4524: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4525: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 4543 "configure"
+#line 4544 "configure"
#include "confdefs.h"
#include <sys/time.h>
int main() {
gettimeofday((struct timeval*)0,(struct timezone*)0);
; return 0; }
EOF
-if { (eval echo configure:4550: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4551: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
# checks for structures
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4570: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:4571: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"\${ac_cv_header_time+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4575 "configure"
+#line 4576 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:4584: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4585: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4605: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:4606: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"\${ac_cv_struct_tm+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4610 "configure"
+#line 4611 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:4618: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4619: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
fi
echo $ac_n "checking for member tm_zone in aggregate type struct tm""... $ac_c" 1>&6
-echo "configure:4639: checking for member tm_zone in aggregate type struct tm" >&5
+echo "configure:4640: checking for member tm_zone in aggregate type struct tm" >&5
if eval "test \"\${ac_cv_c_struct_member_tm_zone+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4644 "configure"
+#line 4645 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
struct tm foo; foo.tm_zone;
; return 0; }
EOF
-if { (eval echo configure:4652: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4653: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_struct_member_tm_zone=yes
else
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:4673: checking for tzname" >&5
+echo "configure:4674: checking for tzname" >&5
if eval "test \"\${ac_cv_var_tzname+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4678 "configure"
+#line 4679 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
atoi(*tzname);
; return 0; }
EOF
-if { (eval echo configure:4688: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
echo $ac_n "checking for time.h that defines altzone""... $ac_c" 1>&6
-echo "configure:4711: checking for time.h that defines altzone" >&5
+echo "configure:4712: checking for time.h that defines altzone" >&5
if eval "test \"\${ac_cv_header_time_altzone+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4716 "configure"
+#line 4717 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
return altzone;
; return 0; }
EOF
-if { (eval echo configure:4723: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4724: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time_altzone=yes
else
was_it_defined=no
echo $ac_n "checking whether sys/select.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:4745: checking whether sys/select.h and sys/time.h may both be included" >&5
+echo "configure:4746: checking whether sys/select.h and sys/time.h may both be included" >&5
cat > conftest.$ac_ext <<EOF
-#line 4747 "configure"
+#line 4748 "configure"
#include "confdefs.h"
#include <sys/types.h>
;
; return 0; }
EOF
-if { (eval echo configure:4758: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4759: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define SYS_SELECT_WITH_SYS_TIME 1
# checks for compiler characteristics
echo $ac_n "checking whether char is unsigned""... $ac_c" 1>&6
-echo "configure:4774: checking whether char is unsigned" >&5
+echo "configure:4775: checking whether char is unsigned" >&5
if eval "test \"\${ac_cv_c_char_unsigned+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# GCC predefines this symbol on systems where it applies.
cat > conftest.$ac_ext <<EOF
-#line 4781 "configure"
+#line 4782 "configure"
#include "confdefs.h"
#ifdef __CHAR_UNSIGNED__
yes
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 4803 "configure"
+#line 4804 "configure"
#include "confdefs.h"
/* volatile prevents gcc2 from optimizing the test away on sparcs. */
#if !defined(__STDC__) || __STDC__ != 1
volatile char c = 255; exit(c < 0);
}
EOF
-if { (eval echo configure:4813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_char_unsigned=yes
else
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4837: checking for working const" >&5
+echo "configure:4838: checking for working const" >&5
if eval "test \"\${ac_cv_c_const+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4842 "configure"
+#line 4843 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:4891: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4892: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:4912: checking for inline" >&5
+echo "configure:4913: checking for inline" >&5
if eval "test \"\${ac_cv_c_inline+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 4919 "configure"
+#line 4920 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:4926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
works=no
echo $ac_n "checking for working volatile""... $ac_c" 1>&6
-echo "configure:4954: checking for working volatile" >&5
+echo "configure:4955: checking for working volatile" >&5
cat > conftest.$ac_ext <<EOF
-#line 4956 "configure"
+#line 4957 "configure"
#include "confdefs.h"
int main() {
volatile int x; x = 0;
; return 0; }
EOF
-if { (eval echo configure:4963: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4964: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
works=no
echo $ac_n "checking for working signed char""... $ac_c" 1>&6
-echo "configure:4980: checking for working signed char" >&5
+echo "configure:4981: checking for working signed char" >&5
cat > conftest.$ac_ext <<EOF
-#line 4982 "configure"
+#line 4983 "configure"
#include "confdefs.h"
int main() {
signed char c;
; return 0; }
EOF
-if { (eval echo configure:4989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4990: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
works=yes
else
have_prototypes=no
echo $ac_n "checking for prototypes""... $ac_c" 1>&6
-echo "configure:5006: checking for prototypes" >&5
+echo "configure:5007: checking for prototypes" >&5
cat > conftest.$ac_ext <<EOF
-#line 5008 "configure"
+#line 5009 "configure"
#include "confdefs.h"
int foo(int x) { return 0; }
int main() {
return foo(10);
; return 0; }
EOF
-if { (eval echo configure:5015: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5016: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_PROTOTYPES 1
works=no
echo $ac_n "checking for variable length prototypes and stdarg.h""... $ac_c" 1>&6
-echo "configure:5030: checking for variable length prototypes and stdarg.h" >&5
+echo "configure:5031: checking for variable length prototypes and stdarg.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5032 "configure"
+#line 5033 "configure"
#include "confdefs.h"
#include <stdarg.h>
return foo(10, "", 3.14);
; return 0; }
EOF
-if { (eval echo configure:5049: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5050: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_STDARG_PROTOTYPES 1
if test "$have_prototypes" = yes; then
bad_prototypes=no
echo $ac_n "checking for bad exec* prototypes""... $ac_c" 1>&6
-echo "configure:5065: checking for bad exec* prototypes" >&5
+echo "configure:5066: checking for bad exec* prototypes" >&5
cat > conftest.$ac_ext <<EOF
-#line 5067 "configure"
+#line 5068 "configure"
#include "confdefs.h"
#include <unistd.h>
int main() {
char **t;execve("@",t,t);
; return 0; }
EOF
-if { (eval echo configure:5074: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5075: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
bad_forward=no
echo $ac_n "checking for bad static forward""... $ac_c" 1>&6
-echo "configure:5091: checking for bad static forward" >&5
+echo "configure:5092: checking for bad static forward" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5096 "configure"
+#line 5097 "configure"
#include "confdefs.h"
struct s { int a; int b; };
}
EOF
-if { (eval echo configure:5112: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5113: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
va_list_is_array=no
echo $ac_n "checking whether va_list is an array""... $ac_c" 1>&6
-echo "configure:5131: checking whether va_list is an array" >&5
+echo "configure:5132: checking whether va_list is an array" >&5
cat > conftest.$ac_ext <<EOF
-#line 5133 "configure"
+#line 5134 "configure"
#include "confdefs.h"
#ifdef HAVE_STDARG_PROTOTYPES
va_list list1, list2; list1 = list2;
; return 0; }
EOF
-if { (eval echo configure:5146: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5147: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
# sigh -- gethostbyname_r is a mess; it can have 3, 5 or 6 arguments :-(
echo $ac_n "checking for gethostbyname_r""... $ac_c" 1>&6
-echo "configure:5162: checking for gethostbyname_r" >&5
+echo "configure:5163: checking for gethostbyname_r" >&5
if eval "test \"\${ac_cv_func_gethostbyname_r+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5167 "configure"
+#line 5168 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname_r(); below. */
; return 0; }
EOF
-if { (eval echo configure:5191: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5192: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname_r=yes"
else
EOF
echo $ac_n "checking gethostbyname_r with 6 args""... $ac_c" 1>&6
-echo "configure:5211: checking gethostbyname_r with 6 args" >&5
+echo "configure:5212: checking gethostbyname_r with 6 args" >&5
OLD_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS $MY_CPPFLAGS $MY_THREAD_CPPFLAGS $MY_CFLAGS"
cat > conftest.$ac_ext <<EOF
-#line 5215 "configure"
+#line 5216 "configure"
#include "confdefs.h"
# include <netdb.h>
; return 0; }
EOF
-if { (eval echo configure:5232: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5233: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 5 args""... $ac_c" 1>&6
-echo "configure:5252: checking gethostbyname_r with 5 args" >&5
+echo "configure:5253: checking gethostbyname_r with 5 args" >&5
cat > conftest.$ac_ext <<EOF
-#line 5254 "configure"
+#line 5255 "configure"
#include "confdefs.h"
# include <netdb.h>
; return 0; }
EOF
-if { (eval echo configure:5271: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5272: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
echo "$ac_t""no" 1>&6
echo $ac_n "checking gethostbyname_r with 3 args""... $ac_c" 1>&6
-echo "configure:5291: checking gethostbyname_r with 3 args" >&5
+echo "configure:5292: checking gethostbyname_r with 3 args" >&5
cat > conftest.$ac_ext <<EOF
-#line 5293 "configure"
+#line 5294 "configure"
#include "confdefs.h"
# include <netdb.h>
; return 0; }
EOF
-if { (eval echo configure:5308: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5309: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
for ac_func in gethostbyname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5344: checking for $ac_func" >&5
+echo "configure:5345: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5349 "configure"
+#line 5350 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Linux requires this for correct f.p. operations
echo $ac_n "checking for __fpu_control""... $ac_c" 1>&6
-echo "configure:5411: checking for __fpu_control" >&5
+echo "configure:5412: checking for __fpu_control" >&5
if eval "test \"\${ac_cv_func___fpu_control+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5416 "configure"
+#line 5417 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char __fpu_control(); below. */
; return 0; }
EOF
-if { (eval echo configure:5440: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func___fpu_control=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for __fpu_control in -lieee""... $ac_c" 1>&6
-echo "configure:5458: checking for __fpu_control in -lieee" >&5
+echo "configure:5459: checking for __fpu_control in -lieee" >&5
ac_lib_var=`echo ieee'_'__fpu_control | sed 'y%./+-%__p_%'`
if eval "test \"\${ac_cv_lib_$ac_lib_var+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lieee $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5466 "configure"
+#line 5467 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
__fpu_control()
; return 0; }
EOF
-if { (eval echo configure:5477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Check for --with-fpectl
echo $ac_n "checking for --with-fpectl""... $ac_c" 1>&6
-echo "configure:5510: checking for --with-fpectl" >&5
+echo "configure:5511: checking for --with-fpectl" >&5
# Check whether --with-fpectl or --without-fpectl was given.
if test "${with_fpectl+set}" = set; then
withval="$with_fpectl"
*) LIBM=-lm
esac
echo $ac_n "checking for --with-libm=STRING""... $ac_c" 1>&6
-echo "configure:5535: checking for --with-libm=STRING" >&5
+echo "configure:5536: checking for --with-libm=STRING" >&5
# Check whether --with-libm or --without-libm was given.
if test "${with_libm+set}" = set; then
withval="$with_libm"
# check for --with-libc=...
echo $ac_n "checking for --with-libc=STRING""... $ac_c" 1>&6
-echo "configure:5556: checking for --with-libc=STRING" >&5
+echo "configure:5557: checking for --with-libc=STRING" >&5
# Check whether --with-libc or --without-libc was given.
if test "${with_libc+set}" = set; then
withval="$with_libc"
for ac_func in hypot
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5580: checking for $ac_func" >&5
+echo "configure:5581: checking for $ac_func" >&5
if eval "test \"\${ac_cv_func_$ac_func+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5585 "configure"
+#line 5586 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5610: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# check for getopt
echo $ac_n "checking for genuine getopt""... $ac_c" 1>&6
-echo "configure:5639: checking for genuine getopt" >&5
+echo "configure:5640: checking for genuine getopt" >&5
if eval "test \"\${ac_cv_func_getopt+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_getopt=no
else
cat > conftest.$ac_ext <<EOF
-#line 5647 "configure"
+#line 5648 "configure"
#include "confdefs.h"
#include <stdio.h>
extern int optind, opterr, getopt();
exit(0);
}
EOF
-if { (eval echo configure:5659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5660: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_getopt=yes
else
# check whether malloc(0) returns NULL or not
echo $ac_n "checking what malloc(0) returns""... $ac_c" 1>&6
-echo "configure:5677: checking what malloc(0) returns" >&5
+echo "configure:5678: checking what malloc(0) returns" >&5
if eval "test \"\${ac_cv_malloc_zero+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5685 "configure"
+#line 5686 "configure"
#include "confdefs.h"
#include <stdio.h>
#ifdef HAVE_STDLIB
exit(0);
}
EOF
-if { (eval echo configure:5704: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5705: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_malloc_zero=nonnull
else
# check for wchar.h
ac_safe=`echo "wchar.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for wchar.h""... $ac_c" 1>&6
-echo "configure:5730: checking for wchar.h" >&5
+echo "configure:5731: checking for wchar.h" >&5
if eval "test \"\${ac_cv_header_$ac_safe+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5735 "configure"
+#line 5736 "configure"
#include "confdefs.h"
#include <wchar.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5740: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# check for usable wchar_t
usable_wchar_t="unkown"
echo $ac_n "checking for usable wchar_t""... $ac_c" 1>&6
-echo "configure:5770: checking for usable wchar_t" >&5
+echo "configure:5771: checking for usable wchar_t" >&5
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5775 "configure"
+#line 5776 "configure"
#include "confdefs.h"
#include "wchar.h"
}
EOF
-if { (eval echo configure:5789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5790: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cat >> confdefs.h <<\EOF
#define HAVE_USABLE_WCHAR_T 1
# check for endianness
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:5808: checking whether byte ordering is bigendian" >&5
+echo "configure:5809: checking whether byte ordering is bigendian" >&5
if eval "test \"\${ac_cv_c_bigendian+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 5815 "configure"
+#line 5816 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:5826: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5827: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 5830 "configure"
+#line 5831 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:5841: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5842: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5861 "configure"
+#line 5862 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:5874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
# Check whether right shifting a negative integer extends the sign bit
# or fills with zeros (like the Cray J90, according to Tim Peters).
echo $ac_n "checking whether right shift extends the sign bit""... $ac_c" 1>&6
-echo "configure:5901: checking whether right shift extends the sign bit" >&5
+echo "configure:5902: checking whether right shift extends the sign bit" >&5
if eval "test \"\${ac_cv_rshift_extends_sign+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5910 "configure"
+#line 5911 "configure"
#include "confdefs.h"
int main()
}
EOF
-if { (eval echo configure:5919: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_rshift_extends_sign=yes
else
#endif
EOF
echo $ac_n "checking for socklen_t""... $ac_c" 1>&6
-echo "configure:5951: checking for socklen_t" >&5
+echo "configure:5952: checking for socklen_t" >&5
if eval "test \"\${ac_cv_type_socklen_t+set}\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5956 "configure"
+#line 5957 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
projects / python / commitdiff