by_ssh_crit | **Optional.** The critical threshold.
by_ssh_timeout | **Optional.** The timeout in seconds.
by_ssh_options | **Optional.** Call ssh with '-o OPTION' (multiple options may be specified as an array).
+by_ssh_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+by_ssh_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
+
### <a id="plugin-check-command-clamd"></a> clamd
clamd_wtime | **Optional.** Response time to result in warning status (seconds).
clamd_ctime | **Optional.** Response time to result in critical status (seconds).
clamd_timeout | **Optional.** Seconds before connection times out. Defaults to 10.
+clamd_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+clamd_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
+
### <a id="plugin-check-command-dhcp"></a> dhcp
Name | Description
---------------------|--------------
dig_server | **Optional.** The DNS server to query. Defaults to "127.0.0.1".
-dig_port | **Optional.** Port number (default: 53).
+dig_port | **Optional.** Port number (default: 53).
dig_lookup | **Required.** The address that should be looked up.
dig_record_type | **Optional.** Record type to lookup (default: A).
dig_expected_address | **Optional.** An address expected to be in the answer section. If not set, uses whatever was in -l.
dig_arguments | **Optional.** Pass STRING as argument(s) to dig.
-dig_retries | **Optional.** Number of retries passed to dig, timeout is divided by this value (Default: 3).
+dig_retries | **Optional.** Number of retries passed to dig, timeout is divided by this value (Default: 3).
dig_warning | **Optional.** Response time to result in warning status (seconds).
dig_critical | **Optional.** Response time to result in critical status (seconds).
dig_timeout | **Optional.** Seconds before connection times out (default: 10).
+dig_ipv4 | **Optional.** Force dig to only use IPv4 query transport. Defaults to false.
+dig_ipv6 | **Optional.** Force dig to only use IPv6 query transport. Defaults to false.
### <a id="plugin-check-command-disk"></a> disk
disk_stat_remote_fs | **Optional.** Only check local filesystems against thresholds. Yet call stat on remote filesystems to test if they are accessible (e.g. to detect Stale NFS Handles). Myy be true or false
disk_mountpoint | **Optional.** Display the mountpoint instead of the partition. May be true or false.
disk_megabytes | **Optional.** Same as --units MB. May be true or false.
-disk_all | **Optional.** Explicitly select all paths. This is equivalent to -R '.\*'. May be true or false.
+disk_all | **Optional.** Explicitly select all paths. This is equivalent to -R '.*'. May be true or false.
disk_eregi_path | **Optional.** Case insensitive regular expression for path/partition (may be repeated).
disk_ereg_path | **Optional.** Regular expression for path or partition (may be repeated).
disk_ignore_eregi_path | **Optional.** Regular expression to ignore selected path/partition (case insensitive) (may be repeated).
ftp_wtime | **Optional.** Response time to result in warning status (seconds).
ftp_ctime | **Optional.** Response time to result in critical status (seconds).
ftp_timeout | **Optional.** Seconds before connection times out. Defaults to 10.
+ftp_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+ftp_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-hostalive"></a> hostalive
http_onredirect | **Optional.** How to handle redirect pages. Possible values: "ok" (default), "warning", "critical", "follow", "sticky" (like follow but stick to address), "stickyport" (like sticky but also to port)
http_pagesize | **Optional.** Minimum page size required:Maximum page size required.
http_timeout | **Optional.** Seconds before connection times out.
-http_ipv4 | **Optional.** Use IPv4 only.
-http_ipv6 | **Optional.** Use IPv6 only.
+http_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+http_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-icmp"></a> icmp
Custom attributes passed as [command parameters](3-monitoring-basics.md#command-passing-parameters):
-Name | Description
-----------------|--------------
-imap_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
-imap_port | **Optional.** The port that should be checked. Defaults to 143.
-imap_timeout | **Optional.** The timeout in seconds.
+Name | Description
+----------------------|--------------
+imap_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
+imap_port | **Optional.** The port that should be checked. Defaults to 143.
+imap_escape | **Optional.** Can use \n, \r, \t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \r\n added to end of quit.
+imap_send | **Optional.** String to send to the server.
+imap_expect | **Optional.** String to expect in server response (may be repeated).
+imap_all | **Optional.** All expect strings need to occur in server response. Default is any.
+imap_quit | **Optional.** String to send server to initiate a clean close of the connection.
+imap_refuse | **Optional.** Accept TCP refusals with states ok, warn, crit (default: crit).
+imap_mismatch | **Optional.** Accept expected string mismatches with states ok, warn, crit (default: warn).
+imap_jail | **Optional.** Hide output from TCP socket.
+imap_maxbytes | **Optional.** Close connection once more than this number of bytes are received.
+imap_delay | **Optional.** Seconds to wait between sending string and polling for response.
+imap_certificate_age | **Optional.** Minimum number of days a certificate has to be valid.
+imap_ssl | **Optional.** Use SSL for the connection.
+imap_warning | **Optional.** Response time to result in warning status (seconds).
+imap_critical | **Optional.** Response time to result in critical status (seconds).
+imap_timeout | **Optional.** Seconds before connection times out (default: 10).
+imap_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+imap_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-ldap"></a> ldap
----------------|--------------
ldap_address | **Optional.** Host name, IP Address, or unix socket (must be an absolute path). Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
ldap_port | **Optional.** Port number. Defaults to 389.
-ldap_attr | **Optional.** LDAP attribute to search for (default: "(objectclass=\*)"
+ldap_attr | **Optional.** LDAP attribute to search for (default: "(objectclass=*)"
ldap_base | **Required.** LDAP base (eg. ou=myunit,o=myorg,c=at).
ldap_bind | **Optional.** LDAP bind DN (if required).
ldap_pass | **Optional.** LDAP password (if required).
nrpe_timeout_unknown | **Optional.** Whether to set timeouts to unknown instead of critical state. Defaults to `false`.
nrpe_timeout | **Optional.** The timeout in seconds.
nrpe_arguments | **Optional.** Arguments that should be passed to the command. Multiple arguments must be defined as array.
-nrpe_ipv4 | **Optional.** Use IPv4 only.
-nrpe_ipv6 | **Optional.** Use IPv6 only.
+nrpe_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+nrpe_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-nscp"></a> nscp
ntp_critical | **Optional.** Offset to result in critical status (seconds).
ntp_timeoffset | **Optional.** Expected offset of the ntp server relative to local server (seconds).
ntp_timeout | **Optional.** Seconds before connection times out (default: 10).
+ntp_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+ntp_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-ntp-peer"></a> ntp_peer
ntp_wsource | **Optional.** Warning threshold for number of usable time sources.
ntp_csource | **Optional.** Critical threshold for number of usable time sources.
ntp_timeout | **Optional.** Seconds before connection times out (default: 10).
+ntp_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+ntp_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-passive"></a> passive
Custom attributes passed as [command parameters](3-monitoring-basics.md#command-passing-parameters):
-Name | Description
-----------------|--------------
-pop_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
-pop_port | **Optional.** The port that should be checked. Defaults to 110.
-pop_timeout | **Optional.** The timeout in seconds.
+Name | Description
+---------------------|--------------
+pop_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
+pop_port | **Optional.** The port that should be checked. Defaults to 110.
+pop_escape | **Optional.** Can use \n, \r, \t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \r\n added to end of quit.
+pop_send | **Optional.** String to send to the server.
+pop_expect | **Optional.** String to expect in server response (may be repeated).
+pop_all | **Optional.** All expect strings need to occur in server response. Default is any.
+pop_quit | **Optional.** String to send server to initiate a clean close of the connection.
+pop_refuse | **Optional.** Accept TCP refusals with states ok, warn, crit (default: crit).
+pop_mismatch | **Optional.** Accept expected string mismatches with states ok, warn, crit (default: warn).
+pop_jail | **Optional.** Hide output from TCP socket.
+pop_maxbytes | **Optional.** Close connection once more than this number of bytes are received.
+pop_delay | **Optional.** Seconds to wait between sending string and polling for response.
+pop_certificate_age | **Optional.** Minimum number of days a certificate has to be valid.
+pop_ssl | **Optional.** Use SSL for the connection.
+pop_warning | **Optional.** Response time to result in warning status (seconds).
+pop_critical | **Optional.** Response time to result in critical status (seconds).
+pop_timeout | **Optional.** Seconds before connection times out (default: 10).
+pop_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+pop_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-processes"></a> procs
Custom attributes passed as [command parameters](3-monitoring-basics.md#command-passing-parameters):
-Name | Description
-----------------|--------------
-simap_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
-simap_port | **Optional.** The host's port.
-simap_timeout | **Optional.** The timeout in seconds.
+Name | Description
+-----------------------|--------------
+simap_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
+simap_port | **Optional.** The port that should be checked. Defaults to 993.
+simap_escape | **Optional.** Can use \n, \r, \t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \r\n added to end of quit.
+simap_send | **Optional.** String to send to the server.
+simap_expect | **Optional.** String to expect in server response (may be repeated).
+simap_all | **Optional.** All expect strings need to occur in server response. Default is any.
+simap_quit | **Optional.** String to send server to initiate a clean close of the connection.
+simap_refuse | **Optional.** Accept TCP refusals with states ok, warn, crit (default: crit).
+simap_mismatch | **Optional.** Accept expected string mismatches with states ok, warn, crit (default: warn).
+simap_jail | **Optional.** Hide output from TCP socket.
+simap_maxbytes | **Optional.** Close connection once more than this number of bytes are received.
+simap_delay | **Optional.** Seconds to wait between sending string and polling for response.
+simap_certificate_age | **Optional.** Minimum number of days a certificate has to be valid.
+simap_ssl | **Optional.** Use SSL for the connection.
+simap_warning | **Optional.** Response time to result in warning status (seconds).
+simap_critical | **Optional.** Response time to result in critical status (seconds).
+simap_timeout | **Optional.** Seconds before connection times out (default: 10).
+simap_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+simap_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-smtp"></a> smtp
smtp_warning | **Optional.** Response time to result in warning status (seconds).
smtp_critical | **Optional.** Response time to result in critical status (seconds).
smtp_timeout | **Optional.** Seconds before connection times out (default: 10).
+smtp_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+smtp_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-snmp"></a> snmp
Custom attributes passed as [command parameters](3-monitoring-basics.md#command-passing-parameters):
-Name | Description
-----------------|--------------
-spop_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
-spop_port | **Optional.** The host's port.
-spop_timeout | **Optional.** The timeout in seconds.
+Name | Description
+----------------------|--------------
+spop_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
+spop_port | **Optional.** The port that should be checked. Defaults to 995.
+spop_escape | **Optional.** Can use \n, \r, \t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \r\n added to end of quit.
+spop_send | **Optional.** String to send to the server.
+spop_expect | **Optional.** String to expect in server response (may be repeated).
+spop_all | **Optional.** All expect strings need to occur in server response. Default is any.
+spop_quit | **Optional.** String to send server to initiate a clean close of the connection.
+spop_refuse | **Optional.** Accept TCP refusals with states ok, warn, crit (default: crit).
+spop_mismatch | **Optional.** Accept expected string mismatches with states ok, warn, crit (default: warn).
+spop_jail | **Optional.** Hide output from TCP socket.
+spop_maxbytes | **Optional.** Close connection once more than this number of bytes are received.
+spop_delay | **Optional.** Seconds to wait between sending string and polling for response.
+spop_certificate_age | **Optional.** Minimum number of days a certificate has to be valid.
+spop_ssl | **Optional.** Use SSL for the connection.
+spop_warning | **Optional.** Response time to result in warning status (seconds).
+spop_critical | **Optional.** Response time to result in critical status (seconds).
+spop_timeout | **Optional.** Seconds before connection times out (default: 10).
+spop_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+spop_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-ssh"></a> ssh
ssh_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
ssh_port | **Optional.** The port that should be checked. Defaults to 22.
ssh_timeout | **Optional.** Seconds before connection times out. Defaults to 10.
+ssh_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+ssh_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-ssl"></a> ssl
Custom attributes passed as [command parameters](3-monitoring-basics.md#command-passing-parameters):
-Name | Description
-----------------|--------------
-ssmtp_address | **Required.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
-ssmtp_port | **Optional.** The port that should be checked. Defaults to 465.
+Name | Description
+-----------------------|--------------
+ssmtp_address | **Optional.** The host's address. Defaults to "$address$" if the host's `address` attribute is set, "$address6$" otherwise.
+ssmtp_port | **Optional.** The port that should be checked. Defaults to 465.
+ssmtp_escape | **Optional.** Can use \n, \r, \t or \\ in send or quit string. Must come before send or quit option. Default: nothing added to send, \r\n added to end of quit.
+ssmtp_send | **Optional.** String to send to the server.
+ssmtp_expect | **Optional.** String to expect in server response (may be repeated).
+ssmtp_all | **Optional.** All expect strings need to occur in server response. Default is any.
+ssmtp_quit | **Optional.** String to send server to initiate a clean close of the connection.
+ssmtp_refuse | **Optional.** Accept TCP refusals with states ok, warn, crit (default: crit).
+ssmtp_mismatch | **Optional.** Accept expected string mismatches with states ok, warn, crit (default: warn).
+ssmtp_jail | **Optional.** Hide output from TCP socket.
+ssmtp_maxbytes | **Optional.** Close connection once more than this number of bytes are received.
+ssmtp_delay | **Optional.** Seconds to wait between sending string and polling for response.
+ssmtp_certificate_age | **Optional.** Minimum number of days a certificate has to be valid.
+ssmtp_ssl | **Optional.** Use SSL for the connection.
+ssmtp_warning | **Optional.** Response time to result in warning status (seconds).
+ssmtp_critical | **Optional.** Response time to result in critical status (seconds).
+ssmtp_timeout | **Optional.** Seconds before connection times out (default: 10).
+ssmtp_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+ssmtp_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-swap"></a> swap
tcp_wtime | **Optional.** Response time to result in warning status (seconds).
tcp_ctime | **Optional.** Response time to result in critical status (seconds).
tcp_timeout | **Optional.** Seconds before connection times out. Defaults to 10.
-tcp_ipv4 | **Optional.** Use IPv4 only.
-tcp_ipv6 | **Optional.** Use IPv6 only.
+tcp_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+tcp_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-udp"></a> udp
udp_send | **Required.** The payload to send in the UDP datagram.
udp_expect | **Required.** The payload to expect in the response datagram.
udp_quit | **Optional.** The payload to send to 'close' the session.
-udp_ipv4 | **Optional.** Use IPv4 only.
-udp_ipv6 | **Optional.** Use IPv6 only.
+udp_ipv4 | **Optional.** Use IPv4 connection. Defaults to false.
+udp_ipv6 | **Optional.** Use IPv6 connection. Defaults to false.
### <a id="plugin-check-command-ups"></a> ups
snmp_privpass | **Required.** SNMP version 3 priv password. No value defined as default..
snmp_warn | **Optional.** The warning threshold.
snmp_crit | **Optional.** The critical threshold.
-snmp_process_name | **Optional.** Name of the process (regexp). No trailing slash!. Defaults to ".\*".
+snmp_process_name | **Optional.** Name of the process (regexp). No trailing slash!. Defaults to ".*".
snmp_perf | **Optional.** Enable perfdata values. Defaults to true.
snmp_timeout | **Optional.** The command timeout in seconds. Defaults to 5 seconds.
ipmi_username | **Optional.** The IPMI username.
ipmi_password | **Optional.** The IPMI password.
ipmi_privilege_level | **Optional.** The IPMI privilege level of the IPMI user.
-ipmi_backward_compatibility_mode | **Optional.** Enable backward compatibility mode, useful for FreeIPMI 0.5.\* (this omits FreeIPMI options "--quiet-cache" and "--sdr-cache-recreate").
+ipmi_backward_compatibility_mode | **Optional.** Enable backward compatibility mode, useful for FreeIPMI 0.5.* (this omits FreeIPMI options "--quiet-cache" and "--sdr-cache-recreate").
ipmi_sensor_type | **Optional.** Limit sensors to query based on IPMI sensor type. Examples for IPMI sensor types are 'Fan', 'Temperature' and 'Voltage'.
ipmi_exclude_sensor_id | **Optional.** Exclude sensor matching ipmi_sensor_id.
ipmi_sensor_id | **Optional.** Include sensor matching ipmi_sensor_id.
mem_used | **Optional.** Tell the plugin to check for used memory in opposite of **mem_free**. Must specify one of these as true.
mem_free | **Optional.** Tell the plugin to check for free memory in opposite of **mem_used**. Must specify one of these as true.
mem_cache | **Optional.** If set to true plugin will count cache as free memory. Defaults to false.
-mem_warning | **Required.** Specify the warning threshold as number interpreted as percent.
-mem_critical | **Required.** Specify the critical threshold as number interpreted as percent.
+mem_warning | **Required.** Specifiy the warning threshold as number interpreted as percent.
+mem_critical | **Required.** Specifiy the critical threshold as number interpreted as percent.
#### <a id="plugin-contrib-command-running-kernel"></a> running_kernel
}
"-4" = {
set_if = "$tcp_ipv4$"
- description = "Use IPv4 only"
+ description = "Use IPv4 connection"
}
"-6" = {
set_if = "$tcp_ipv6$"
- description = "Use IPv6 only"
+ description = "Use IPv6 connection"
}
}
"-q" = "$udp_quit$"
"-4" = {
set_if = "$udp_ipv4$"
- description = "Use IPv4 only"
+ description = "Use IPv4 connection"
}
"-6" = {
set_if = "$udp_ipv6$"
- description = "Use IPv6 only"
+ description = "Use IPv6 connection"
}
}
}
"-4" = {
set_if = "$http_ipv4$"
- description = "Use IPv4 only"
+ description = "Use IPv4 connection"
}
"-6" = {
set_if = "$http_ipv6$"
- description = "Use IPv6 only"
+ description = "Use IPv6 connection"
}
}
value = "$ftp_timeout$"
description = "Seconds before connection times out. Defaults to 10."
}
+ "-4" = {
+ set_if = "$ftp_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$ftp_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.ftp_address = "$check_address$"
vars.ftp_refuse = "crit"
vars.ftp_mismatch = "warn"
vars.ftp_timeout = 10
+ vars.check_ipv4 = "$ftp_ipv4$"
+ vars.check_ipv6 = "$ftp_ipv6$"
}
object CheckCommand "smtp" {
"-R" = "$smtp_response$"
"-F" = "$smtp_helo_fqdn$"
"-D" = "$smtp_certificate_age$"
- "-S" = "$smtp_starttls$"
+ "-S" = {
+ set_if = "$smtp_starttls$"
+ description = "Use STARTTLS for the connection."
+ }
"-A" = "$smtp_authtype$"
"-U" = "$smtp_authuser$"
"-P" = "$smtp_authpass$"
"-w" = "$smtp_warning$"
"-c" = "$smtp_critical$"
"-t" = "$smtp_timeout$"
+ "-4" = {
+ set_if = "$smtp_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$smtp_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.smtp_address = "$check_address$"
+ vars.check_ipv4 = "$smtp_ipv4$"
+ vars.check_ipv6 = "$smtp_ipv6$"
}
object CheckCommand "ssmtp" {
import "ipv4-or-ipv6"
command = [ PluginDir + "/check_ssmtp" ]
+
arguments = {
"-H" = "$ssmtp_address$"
"-p" = "$ssmtp_port$"
+ "-E" = "$ssmtp_escape$"
+ "-s" = "$ssmtp_send$"
+ "-e" = "$ssmtp_expect$"
+ "-A" = {
+ set_if = "$ssmtp_all$"
+ description = "All expect strings need to occur in server response. Default is any."
+ }
+ "-q" = "$ssmtp_quit$"
+ "-r" = "$ssmtp_refuse$"
+ "-M" = "$ssmtp_mismatch$"
+ "-j" = {
+ set_if = "$ssmtp_jail$"
+ description = "Hide output from TCP socket."
+ }
+ "-m" = "$ssmtp_maxbytes$"
+ "-d" = "$ssmtp_delay$"
+ "-D" = "$ssmtp_certificate_age$"
+ "-S" = {
+ set_if = "$ssmtp_ssl$"
+ description = "Use SSL for the connection."
+ }
+ "-w" = "$ssmtp_warning$"
+ "-c" = "$ssmtp_critical$"
+ "-t" = "$ssmtp_timeout$"
+ "-4" = {
+ set_if = "$ssmtp_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$ssmtp_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.ssmtp_address = "$check_address$"
+ vars.check_ipv4 = "$ssmtp_ipv4$"
+ vars.check_ipv6 = "$ssmtp_ipv6$"
}
object CheckCommand "imap" {
arguments = {
"-H" = "$imap_address$"
"-p" = "$imap_port$"
+ "-E" = "$imap_escape$"
+ "-s" = "$imap_send$"
+ "-e" = "$imap_expect$"
+ "-A" = {
+ set_if = "$imap_all$"
+ description = "All expect strings need to occur in server response. Default is any."
+ }
+ "-q" = "$imap_quit$"
+ "-r" = "$imap_refuse$"
+ "-M" = "$imap_mismatch$"
+ "-j" = {
+ set_if = "$imap_jail$"
+ description = "Hide output from TCP socket."
+ }
+ "-m" = "$imap_maxbytes$"
+ "-d" = "$imap_delay$"
+ "-D" = "$imap_certificate_age$"
+ "-S" = {
+ set_if = "$imap_ssl$"
+ description = "Use SSL for the connection."
+ }
+ "-w" = "$imap_warning$"
+ "-c" = "$imap_critical$"
"-t" = "$imap_timeout$"
+ "-4" = {
+ set_if = "$imap_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$imap_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.imap_address = "$check_address$"
+ vars.check_ipv4 = "$imap_ipv4$"
+ vars.check_ipv6 = "$imap_ipv6$"
}
object CheckCommand "simap" {
import "plugin-check-command"
import "ipv4-or-ipv6"
- command = [ PluginDir + "/check_simap" ]
+ command = [ PluginDir + "/check_simap" ]
arguments = {
"-H" = "$simap_address$"
"-p" = "$simap_port$"
+ "-E" = "$simap_escape$"
+ "-s" = "$simap_send$"
+ "-e" = "$simap_expect$"
+ "-A" = {
+ set_if = "$simap_all$"
+ description = "All expect strings need to occur in server response. Default is any."
+ }
+ "-q" = "$simap_quit$"
+ "-r" = "$simap_refuse$"
+ "-M" = "$simap_mismatch$"
+ "-j" = {
+ set_if = "$simap_jail$"
+ description = "Hide output from TCP socket."
+ }
+ "-m" = "$simap_maxbytes$"
+ "-d" = "$simap_delay$"
+ "-D" = "$simap_certificate_age$"
+ "-S" = {
+ set_if = "$simap_ssl$"
+ description = "Use SSL for the connection."
+ }
+ "-w" = "$simap_warning$"
+ "-c" = "$simap_critical$"
"-t" = "$simap_timeout$"
+ "-4" = {
+ set_if = "$simap_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$simap_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.simap_address = "$check_address$"
+ vars.check_ipv4 = "$simap_ipv4$"
+ vars.check_ipv6 = "$simap_ipv6$"
}
object CheckCommand "pop" {
arguments = {
"-H" = "$pop_address$"
"-p" = "$pop_port$"
+ "-E" = "$pop_escape$"
+ "-s" = "$pop_send$"
+ "-e" = "$pop_expect$"
+ "-A" = {
+ set_if = "$pop_all$"
+ description = "All expect strings need to occur in server response. Default is any."
+ }
+ "-q" = "$pop_quit$"
+ "-r" = "$pop_refuse$"
+ "-M" = "$pop_mismatch$"
+ "-j" = {
+ set_if = "$pop_jail$"
+ description = "Hide output from TCP socket."
+ }
+ "-m" = "$pop_maxbytes$"
+ "-d" = "$pop_delay$"
+ "-D" = "$pop_certificate_age$"
+ "-S" = {
+ set_if = "$pop_ssl$"
+ description = "Use SSL for the connection."
+ }
+ "-w" = "$pop_warning$"
+ "-c" = "$pop_critical$"
"-t" = "$pop_timeout$"
+ "-4" = {
+ set_if = "$pop_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$pop_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.pop_address = "$check_address$"
+ vars.check_ipv4 = "$pop_ipv4$"
+ vars.check_ipv6 = "$pop_ipv6$"
}
object CheckCommand "spop" {
arguments = {
"-H" = "$spop_address$"
"-p" = "$spop_port$"
+ "-E" = "$spop_escape$"
+ "-s" = "$spop_send$"
+ "-e" = "$spop_expect$"
+ "-A" = {
+ set_if = "$spop_all$"
+ description = "All expect strings need to occur in server response. Default is any."
+ }
+ "-q" = "$spop_quit$"
+ "-r" = "$spop_refuse$"
+ "-M" = "$spop_mismatch$"
+ "-j" = {
+ set_if = "$spop_jail$"
+ description = "Hide output from TCP socket."
+ }
+ "-m" = "$spop_maxbytes$"
+ "-d" = "$spop_delay$"
+ "-D" = "$spop_certificate_age$"
+ "-S" = {
+ set_if = "$spop_ssl$"
+ description = "Use SSL for the connection."
+ }
+ "-w" = "$spop_warning$"
+ "-c" = "$spop_critical$"
"-t" = "$spop_timeout$"
+ "-4" = {
+ set_if = "$spop_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$spop_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.spop_address = "$check_address$"
+ vars.check_ipv4 = "$spop_ipv4$"
+ vars.check_ipv6 = "$spop_ipv6$"
}
object CheckCommand "ntp_time" {
"-c" = "$ntp_critical$"
"-o" = "$ntp_timeoffset$"
"-t" = "$ntp_timeout$"
+ "-4" = {
+ set_if = "$ntp_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$ntp_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.ntp_address = "$check_address$"
+ vars.check_ipv4 = "$ntp_ipv4$"
+ vars.check_ipv6 = "$ntp_ipv6$"
}
object CheckCommand "ntp_peer" {
"-m" = "$ntp_wsource$"
"-n" = "$ntp_csource$"
"-t" = "$ntp_timeout$"
+ "-4" = {
+ set_if = "$ntp_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$ntp_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.ntp_address = "$check_address$"
+ vars.check_ipv4 = "$ntp_ipv4$"
+ vars.check_ipv6 = "$ntp_ipv6$"
}
object CheckCommand "ssh" {
skip_key = true
order = 1
}
+ "-4" = {
+ set_if = "$ssh_ipv4$"
+ description = "Use IPv4 connection"
+ }
+ "-6" = {
+ set_if = "$ssh_ipv6$"
+ description = "Use IPv6 connection"
+ }
}
vars.ssh_address = "$check_address$"
+ vars.check_ipv4 = "$ssh_ipv4$"
+ vars.check_ipv6 = "$ssh_ipv6$"
}
object CheckCommand "disk" {
"-w" = "$dig_warning$"
"-c" = "$dig_critical$"
"-t" = "$dig_timeout$"
+ "-4" = {
+ set_if = "$dig_ipv4$"
+ description = "Force dig to only use IPv4 query transport"
+ }
+ "-6" = {
+ set_if = "$dig_ipv6$"
+ description = "Force dig to only use IPv6 query transport"
+ }
}
vars.dig_server = "$check_address$"
+ vars.check_ipv4 = "$dig_ipv4$"
+ vars.check_ipv6 = "$dig_ipv6$"
}
object CheckCommand "nscp" {
value = "$by_ssh_options$"
description = "Provide ssh options (may be repeated)"
}
+ "-4" = {
+ set_if = "$by_ssh_ipv4$"
+ description = "Use IPv4 only"
+ }
+ "-6" = {
+ set_if = "$by_ssh_ipv6$"
+ description = "Use IPv6 only"
+ }
}
vars.by_ssh_address = "$check_address$"
vars.by_ssh_quiet = false
+ vars.check_ipv4 = "$by_ssh_ipv4$"
+ vars.check_ipv6 = "$by_ssh_ipv6$"
}
object CheckCommand "ups" {
}
"-4" = {
set_if = "$nrpe_ipv4$"
- description = "Use IPv4 only"
+ description = "Use IPv4 connection"
}
"-6" = {
set_if = "$nrpe_ipv6$"
- description = "Use IPv6 only"
+ description = "Use IPv6 connection"
}
}
value = "$clamd_timeout$"
description = "Seconds before connection times out. Defaults to 10."
}
+ "-4" = {
+ set_if = "$clamd_ipv4$"
+ description = "Use IPv4 only"
+ }
+ "-6" = {
+ set_if = "$clamd_ipv6$"
+ description = "Use IPv6 only"
+ }
}
vars.clamd_ssl = false
vars.clamd_refuse = "crit"
vars.clamd_mismatch = "warn"
vars.clamd_timeout = 10
+ vars.check_ipv4 = "$clamd_ipv4$"
+ vars.check_ipv6 = "$clamd_ipv6$"
}
object CheckCommand "mailq" {
projects / icinga2 / commitdiff