2006-03-14 Hans Boehm <Hans.Boehm@hp.com>
authorhboehm <hboehm>
Wed, 15 Mar 2006 06:53:22 +0000 (06:53 +0000)
committerIvan Maidanski <ivmai@mail.ru>
Mon, 25 Jul 2011 11:19:42 +0000 (15:19 +0400)
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove.
2006-03-14  Hans Boehm  <Hans.Boehm@hp.com>
* libatomic_ops-1.1/{Makefile,config.status}: remove

Makefile [deleted file]
config.status [deleted file]

diff --git a/Makefile b/Makefile
deleted file mode 100644 (file)
index 820cd0a..0000000
--- a/Makefile
+++ /dev/null
@@ -1,563 +0,0 @@
-# Makefile.in generated by automake 1.9.3 from Makefile.am.
-# Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-srcdir = .
-top_srcdir = .
-
-pkgdatadir = $(datadir)/libatomic_ops
-pkglibdir = $(libdir)/libatomic_ops
-pkgincludedir = $(includedir)/libatomic_ops
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = /usr/bin/install -c
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = ia64-unknown-linux-gnu
-host_triplet = ia64-unknown-linux-gnu
-target_triplet = ia64-unknown-linux-gnu
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-       $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
-       ChangeLog INSTALL NEWS compile config.guess config.sub depcomp \
-       install-sh missing mkinstalldirs
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-       $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/src/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-       html-recursive info-recursive install-data-recursive \
-       install-exec-recursive install-info-recursive \
-       install-recursive installcheck-recursive installdirs-recursive \
-       pdf-recursive ps-recursive uninstall-info-recursive \
-       uninstall-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = ${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run aclocal-1.9
-AMDEP_FALSE = #
-AMDEP_TRUE = 
-AMTAR = ${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run tar
-AUTOCONF = ${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run automake-1.9
-AWK = gawk
-CC = cc
-CCAS = cc
-CCASFLAGS = -g -O2
-CCDEPMODE = depmode=gcc3
-CFLAGS = -g -O2 -DNDEBUG
-CPP = cc -E
-CPPFLAGS = 
-CYGPATH_W = echo
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = grep -E
-EXEEXT = 
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
-LDFLAGS = 
-LIBOBJS = 
-LIBS = 
-LTLIBOBJS = 
-MAKEINFO = ${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run makeinfo
-NEED_ASM_FALSE = 
-NEED_ASM_TRUE = #
-OBJEXT = o
-PACKAGE = libatomic_ops
-PACKAGE_BUGREPORT = 
-PACKAGE_NAME = libatomic_ops
-PACKAGE_STRING = libatomic_ops 1.1
-PACKAGE_TARNAME = libatomic_ops
-PACKAGE_VERSION = 1.1
-PATH_SEPARATOR = :
-PICFLAG = -fPIC
-RANLIB = ranlib
-SET_MAKE = 
-SHELL = /bin/sh
-STRIP = 
-VERSION = 1.1
-ac_ct_CC = cc
-ac_ct_RANLIB = ranlib
-ac_ct_STRIP = 
-am__fastdepCC_FALSE = #
-am__fastdepCC_TRUE = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = ia64-unknown-linux-gnu
-build_alias = 
-build_cpu = ia64
-build_os = linux-gnu
-build_vendor = unknown
-datadir = ${prefix}/share
-exec_prefix = ${prefix}
-host = ia64-unknown-linux-gnu
-host_alias = 
-host_cpu = ia64
-host_os = linux-gnu
-host_vendor = unknown
-includedir = ${prefix}/include
-infodir = ${prefix}/info
-install_sh = /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localstatedir = ${prefix}/var
-mandir = ${prefix}/man
-mkdir_p = mkdir -p --
-oldincludedir = /usr/include
-prefix = /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-install
-program_transform_name = s,x,x,
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-sysconfdir = ${prefix}/etc
-target = ia64-unknown-linux-gnu
-target_alias = 
-target_cpu = ia64
-target_os = linux-gnu
-target_vendor = unknown
-SUBDIRS = src doc tests
-all: all-recursive
-
-.SUFFIXES:
-am--refresh:
-       @:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-       @for dep in $?; do \
-         case '$(am__configure_deps)' in \
-           *$$dep*) \
-             echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
-             cd $(srcdir) && $(AUTOMAKE) --gnu  \
-               && exit 0; \
-             exit 1;; \
-         esac; \
-       done; \
-       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
-       cd $(top_srcdir) && \
-         $(AUTOMAKE) --gnu  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-       @case '$?' in \
-         *config.status*) \
-           echo ' $(SHELL) ./config.status'; \
-           $(SHELL) ./config.status;; \
-         *) \
-           echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-           cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-       esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-       $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-       cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-       cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-       @set fnord $$MAKEFLAGS; amf=$$2; \
-       dot_seen=no; \
-       target=`echo $@ | sed s/-recursive//`; \
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         echo "Making $$target in $$subdir"; \
-         if test "$$subdir" = "."; then \
-           dot_seen=yes; \
-           local_target="$$target-am"; \
-         else \
-           local_target="$$target"; \
-         fi; \
-         (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-          || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-       done; \
-       if test "$$dot_seen" = "no"; then \
-         $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-       fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-       @set fnord $$MAKEFLAGS; amf=$$2; \
-       dot_seen=no; \
-       case "$@" in \
-         distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-         *) list='$(SUBDIRS)' ;; \
-       esac; \
-       rev=''; for subdir in $$list; do \
-         if test "$$subdir" = "."; then :; else \
-           rev="$$subdir $$rev"; \
-         fi; \
-       done; \
-       rev="$$rev ."; \
-       target=`echo $@ | sed s/-recursive//`; \
-       for subdir in $$rev; do \
-         echo "Making $$target in $$subdir"; \
-         if test "$$subdir" = "."; then \
-           local_target="$$target-am"; \
-         else \
-           local_target="$$target"; \
-         fi; \
-         (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-          || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
-       done && test -z "$$fail"
-tags-recursive:
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-       done
-ctags-recursive:
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-       done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-       list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '    { files[$$0] = 1; } \
-              END { for (i in files) print i; }'`; \
-       mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
-       tags=; \
-       here=`pwd`; \
-       if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-         include_option=--etags-include; \
-         empty_fix=.; \
-       else \
-         include_option=--include; \
-         empty_fix=; \
-       fi; \
-       list='$(SUBDIRS)'; for subdir in $$list; do \
-         if test "$$subdir" = .; then :; else \
-           test ! -f $$subdir/TAGS || \
-             tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-         fi; \
-       done; \
-       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '    { files[$$0] = 1; } \
-              END { for (i in files) print i; }'`; \
-       if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-         test -n "$$unique" || unique=$$empty_fix; \
-         $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-           $$tags $$unique; \
-       fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
-       tags=; \
-       here=`pwd`; \
-       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '    { files[$$0] = 1; } \
-              END { for (i in files) print i; }'`; \
-       test -z "$(CTAGS_ARGS)$$tags$$unique" \
-         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-            $$tags $$unique
-
-GTAGS:
-       here=`$(am__cd) $(top_builddir) && pwd` \
-         && cd $(top_srcdir) \
-         && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-       $(am__remove_distdir)
-       mkdir $(distdir)
-       @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-       list='$(DISTFILES)'; for file in $$list; do \
-         case $$file in \
-           $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-           $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-         esac; \
-         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-         dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-         if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-           dir="/$$dir"; \
-           $(mkdir_p) "$(distdir)$$dir"; \
-         else \
-           dir=''; \
-         fi; \
-         if test -d $$d/$$file; then \
-           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-             cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-           fi; \
-           cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-         else \
-           test -f $(distdir)/$$file \
-           || cp -p $$d/$$file $(distdir)/$$file \
-           || exit 1; \
-         fi; \
-       done
-       list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-         if test "$$subdir" = .; then :; else \
-           test -d "$(distdir)/$$subdir" \
-           || $(mkdir_p) "$(distdir)/$$subdir" \
-           || exit 1; \
-           distdir=`$(am__cd) $(distdir) && pwd`; \
-           top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-           (cd $$subdir && \
-             $(MAKE) $(AM_MAKEFLAGS) \
-               top_distdir="$$top_distdir" \
-               distdir="$$distdir/$$subdir" \
-               distdir) \
-             || exit 1; \
-         fi; \
-       done
-       -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-         ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-         ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-         ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-       || chmod -R a+r $(distdir)
-dist-gzip: distdir
-       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-       $(am__remove_distdir)
-
-dist-bzip2: distdir
-       tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-       $(am__remove_distdir)
-
-dist-tarZ: distdir
-       tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-       $(am__remove_distdir)
-
-dist-shar: distdir
-       shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-       $(am__remove_distdir)
-
-dist-zip: distdir
-       -rm -f $(distdir).zip
-       zip -rq $(distdir).zip $(distdir)
-       $(am__remove_distdir)
-
-dist dist-all: distdir
-       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-       $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-       case '$(DIST_ARCHIVES)' in \
-       *.tar.gz*) \
-         GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
-       *.tar.bz2*) \
-         bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
-       *.tar.Z*) \
-         uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-       *.shar.gz*) \
-         GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-       *.zip*) \
-         unzip $(distdir).zip ;;\
-       esac
-       chmod -R a-w $(distdir); chmod a+w $(distdir)
-       mkdir $(distdir)/_build
-       mkdir $(distdir)/_inst
-       chmod a-w $(distdir)
-       dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-         && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-         && cd $(distdir)/_build \
-         && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-           $(DISTCHECK_CONFIGURE_FLAGS) \
-         && $(MAKE) $(AM_MAKEFLAGS) \
-         && $(MAKE) $(AM_MAKEFLAGS) dvi \
-         && $(MAKE) $(AM_MAKEFLAGS) check \
-         && $(MAKE) $(AM_MAKEFLAGS) install \
-         && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-         && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-         && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-               distuninstallcheck \
-         && chmod -R a-w "$$dc_install_base" \
-         && ({ \
-              (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-              && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-                   distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-             } || { rm -rf "$$dc_destdir"; exit 1; }) \
-         && rm -rf "$$dc_destdir" \
-         && $(MAKE) $(AM_MAKEFLAGS) dist \
-         && rm -rf $(DIST_ARCHIVES) \
-         && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-       $(am__remove_distdir)
-       @(echo "$(distdir) archives ready for distribution: "; \
-         list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-         sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-       @cd $(distuninstallcheck_dir) \
-       && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-          || { echo "ERROR: files left after uninstall:" ; \
-               if test -n "$(DESTDIR)"; then \
-                 echo "  (check DESTDIR support)"; \
-               fi ; \
-               $(distuninstallcheck_listfiles) ; \
-               exit 1; } >&2
-distcleancheck: distclean
-       @if test '$(srcdir)' = . ; then \
-         echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-         exit 1 ; \
-       fi
-       @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-         || { echo "ERROR: files left in build directory after distclean:" ; \
-              $(distcleancheck_listfiles) ; \
-              exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-       $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-         `test -z '$(STRIP)' || \
-           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-       @echo "This command is intended for maintainers to use"
-       @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
-       -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-       -rm -f $(am__CONFIG_DISTCLEAN_FILES)
-       -rm -rf $(top_srcdir)/autom4te.cache
-       -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-       check-am clean clean-generic clean-recursive ctags \
-       ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
-       dist-tarZ dist-zip distcheck distclean distclean-generic \
-       distclean-recursive distclean-tags distcleancheck distdir \
-       distuninstallcheck dvi dvi-am html html-am info info-am \
-       install install-am install-data install-data-am install-exec \
-       install-exec-am install-info install-info-am install-man \
-       install-strip installcheck installcheck-am installdirs \
-       installdirs-am maintainer-clean maintainer-clean-generic \
-       maintainer-clean-recursive mostlyclean mostlyclean-generic \
-       mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
-       uninstall uninstall-am uninstall-info-am
-
-
-#distclean-local:
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/config.status b/config.status
deleted file mode 100755 (executable)
index a2276e4..0000000
+++ /dev/null
@@ -1,1210 +0,0 @@
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-        X"$0" : 'X\(//\)$' \| \
-        X"$0" : 'X\(/\)$' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-         /^X\/\(\/\/\)$/{ s//\1/; q; }
-         /^X\/\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-        case $as_dir in
-        /*)
-          if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-            $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-            $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-            CONFIG_SHELL=$as_dir/$as_base
-            export CONFIG_SHELL
-            exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-          fi;;
-        esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='     ' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS="  $as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by libatomic_ops $as_me 1.1, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-config_files=" Makefile src/Makefile src/atomic_ops/Makefile src/atomic_ops/sysdeps/Makefile doc/Makefile tests/Makefile"
-config_headers=" src/config.h"
-config_commands=" depfiles default"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-                  instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-                  instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf@gnu.org>."
-ac_cs_version="\
-libatomic_ops config.status 1.1
-configured by ./configure, generated by GNU Autoconf 2.59,
-  with options \"'--prefix=/home/hboehm/gc7/gc7.0alpha6/libatomic_ops-install' 'CC=cc'\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=.
-INSTALL="/usr/bin/install -c"
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
-  echo "running /bin/sh ./configure " '--prefix=/home/hboehm/gc7/gc7.0alpha6/libatomic_ops-install' 'CC=cc' $ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec /bin/sh ./configure '--prefix=/home/hboehm/gc7/gc7.0alpha6/libatomic_ops-install' 'CC=cc' $ac_configure_extra_args --no-create --no-recursion
-fi
-
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="" ac_aux_dir="."
-PICFLAG=-fPIC
-CC=cc
-DEFS=-DHAVE_CONFIG_H
-
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-  "src/atomic_ops/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/atomic_ops/Makefile" ;;
-  "src/atomic_ops/sysdeps/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/atomic_ops/sysdeps/Makefile" ;;
-  "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
-  "tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;;
-  "src/config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS src/config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
-s,@SHELL@,/bin/sh,;t t
-s,@PATH_SEPARATOR@,:,;t t
-s,@PACKAGE_NAME@,libatomic_ops,;t t
-s,@PACKAGE_TARNAME@,libatomic_ops,;t t
-s,@PACKAGE_VERSION@,1.1,;t t
-s,@PACKAGE_STRING@,libatomic_ops 1.1,;t t
-s,@PACKAGE_BUGREPORT@,,;t t
-s,@exec_prefix@,${prefix},;t t
-s,@prefix@,/home/hboehm/gc7/gc7.0alpha6/libatomic_ops-install,;t t
-s,@program_transform_name@,s,x,x,,;t t
-s,@bindir@,${exec_prefix}/bin,;t t
-s,@sbindir@,${exec_prefix}/sbin,;t t
-s,@libexecdir@,${exec_prefix}/libexec,;t t
-s,@datadir@,${prefix}/share,;t t
-s,@sysconfdir@,${prefix}/etc,;t t
-s,@sharedstatedir@,${prefix}/com,;t t
-s,@localstatedir@,${prefix}/var,;t t
-s,@libdir@,${exec_prefix}/lib,;t t
-s,@includedir@,${prefix}/include,;t t
-s,@oldincludedir@,/usr/include,;t t
-s,@infodir@,${prefix}/info,;t t
-s,@mandir@,${prefix}/man,;t t
-s,@build_alias@,,;t t
-s,@host_alias@,,;t t
-s,@target_alias@,,;t t
-s,@DEFS@,-DHAVE_CONFIG_H,;t t
-s,@ECHO_C@,,;t t
-s,@ECHO_N@,-n,;t t
-s,@ECHO_T@,,;t t
-s,@LIBS@,,;t t
-s,@build@,ia64-unknown-linux-gnu,;t t
-s,@build_cpu@,ia64,;t t
-s,@build_vendor@,unknown,;t t
-s,@build_os@,linux-gnu,;t t
-s,@host@,ia64-unknown-linux-gnu,;t t
-s,@host_cpu@,ia64,;t t
-s,@host_vendor@,unknown,;t t
-s,@host_os@,linux-gnu,;t t
-s,@target@,ia64-unknown-linux-gnu,;t t
-s,@target_cpu@,ia64,;t t
-s,@target_vendor@,unknown,;t t
-s,@target_os@,linux-gnu,;t t
-s,@INSTALL_PROGRAM@,${INSTALL},;t t
-s,@INSTALL_SCRIPT@,${INSTALL},;t t
-s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
-s,@CYGPATH_W@,echo,;t t
-s,@PACKAGE@,libatomic_ops,;t t
-s,@VERSION@,1.1,;t t
-s,@ACLOCAL@,${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run aclocal-1.9,;t t
-s,@AUTOCONF@,${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run autoconf,;t t
-s,@AUTOMAKE@,${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run automake-1.9,;t t
-s,@AUTOHEADER@,${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run autoheader,;t t
-s,@MAKEINFO@,${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run makeinfo,;t t
-s,@install_sh@,/home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/install-sh,;t t
-s,@STRIP@,,;t t
-s,@ac_ct_STRIP@,,;t t
-s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t
-s,@mkdir_p@,mkdir -p --,;t t
-s,@AWK@,gawk,;t t
-s,@SET_MAKE@,,;t t
-s,@am__leading_dot@,.,;t t
-s,@AMTAR@,${SHELL} /home/hboehm/gc7/gc7.0alpha6/libatomic_ops-1.1/missing --run tar,;t t
-s,@am__tar@,${AMTAR} chof - "$$tardir",;t t
-s,@am__untar@,${AMTAR} xf -,;t t
-s,@RANLIB@,ranlib,;t t
-s,@ac_ct_RANLIB@,ranlib,;t t
-s,@CC@,cc,;t t
-s,@CFLAGS@,-g -O2 -DNDEBUG,;t t
-s,@LDFLAGS@,,;t t
-s,@CPPFLAGS@,,;t t
-s,@ac_ct_CC@,cc,;t t
-s,@EXEEXT@,,;t t
-s,@OBJEXT@,o,;t t
-s,@DEPDIR@,.deps,;t t
-s,@am__include@,include,;t t
-s,@am__quote@,,;t t
-s,@AMDEP_TRUE@,,;t t
-s,@AMDEP_FALSE@,#,;t t
-s,@AMDEPBACKSLASH@,\,;t t
-s,@CCDEPMODE@,depmode=gcc3,;t t
-s,@am__fastdepCC_TRUE@,,;t t
-s,@am__fastdepCC_FALSE@,#,;t t
-s,@CCAS@,cc,;t t
-s,@CCASFLAGS@,-g -O2,;t t
-s,@CPP@,cc -E,;t t
-s,@EGREP@,grep -E,;t t
-s,@PICFLAG@,-fPIC,;t t
-s,@NEED_ASM_TRUE@,#,;t t
-s,@NEED_ASM_FALSE@,,;t t
-s,@LIBOBJS@,,;t t
-s,@LTLIBOBJS@,,;t t
-CEOF
-
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-       ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-       ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-       cat >$tmp/stdin
-       ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-       ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-       ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$ac_file" : 'X\(//\)[^/]' \| \
-        X"$ac_file" : 'X\(//\)$' \| \
-        X"$ac_file" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_dir" : 'X\(//\)[^/]' \| \
-        X"$as_dir" : 'X\(//\)$' \| \
-        X"$as_dir" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-                                    sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-        # Absolute (can't be DOS-style, as IFS=:)
-        test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-        echo "$f";;
-      *) # Relative
-        if test -f "$f"; then
-          # Build tree
-          echo "$f"
-        elif test -f "$srcdir/$f"; then
-          # Source tree
-          echo "$srcdir/$f"
-        else
-          # /dev/null tree
-          { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-        fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  sed "/^[      ]*VPATH[        ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[    ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[      ]*$//;
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([   ]*\)#\([        ]*define[       ][      ]*\)'
-ac_dB='[        ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([   ]*\)#\([        ]*\)undef\([    ][      ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-       cat >$tmp/stdin
-       ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-       ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-       ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-        # Absolute (can't be DOS-style, as IFS=:)
-        test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-        # Do quote $f, to prevent DOS paths from being IFS'd.
-        echo "$f";;
-      *) # Relative
-        if test -f "$f"; then
-          # Build tree
-          echo "$f"
-        elif test -f "$srcdir/$f"; then
-          # Source tree
-          echo "$srcdir/$f"
-        else
-          # /dev/null tree
-          { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-        fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[      ]*$//' $ac_file_inputs >$tmp/in
-
-  # Handle all the #define templates only if necessary.
-  if grep "^[   ]*#[    ]*define" $tmp/in >/dev/null; then
-  # If there are no defines, we may have an empty if/fi
-  :
-  cat >$tmp/defines.sed <<CEOF
-/^[     ]*#[    ]*define/!b
-t clr
-: clr
-${ac_dA}PACKAGE_NAME${ac_dB}PACKAGE_NAME${ac_dC}"libatomic_ops"${ac_dD}
-${ac_dA}PACKAGE_TARNAME${ac_dB}PACKAGE_TARNAME${ac_dC}"libatomic_ops"${ac_dD}
-${ac_dA}PACKAGE_VERSION${ac_dB}PACKAGE_VERSION${ac_dC}"1.1"${ac_dD}
-${ac_dA}PACKAGE_STRING${ac_dB}PACKAGE_STRING${ac_dC}"libatomic_ops 1.1"${ac_dD}
-${ac_dA}PACKAGE_BUGREPORT${ac_dB}PACKAGE_BUGREPORT${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE${ac_dB}PACKAGE${ac_dC}"libatomic_ops"${ac_dD}
-${ac_dA}VERSION${ac_dB}VERSION${ac_dC}"1.1"${ac_dD}
-${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_STAT_H${ac_dB}HAVE_SYS_STAT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRING_H${ac_dB}HAVE_STRING_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MEMORY_H${ac_dB}HAVE_MEMORY_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRINGS_H${ac_dB}HAVE_STRINGS_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_INTTYPES_H${ac_dB}HAVE_INTTYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETPAGESIZE${ac_dB}HAVE_GETPAGESIZE${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MMAP${ac_dB}HAVE_MMAP${ac_dC}1${ac_dD}
-${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
-CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  fi # grep
-
-  # Handle all the #undef templates
-  cat >$tmp/undefs.sed <<CEOF
-/^[     ]*#[    ]*undef/!b
-t clr
-: clr
-${ac_uA}PACKAGE_NAME${ac_uB}PACKAGE_NAME${ac_uC}"libatomic_ops"${ac_uD}
-${ac_uA}PACKAGE_TARNAME${ac_uB}PACKAGE_TARNAME${ac_uC}"libatomic_ops"${ac_uD}
-${ac_uA}PACKAGE_VERSION${ac_uB}PACKAGE_VERSION${ac_uC}"1.1"${ac_uD}
-${ac_uA}PACKAGE_STRING${ac_uB}PACKAGE_STRING${ac_uC}"libatomic_ops 1.1"${ac_uD}
-${ac_uA}PACKAGE_BUGREPORT${ac_uB}PACKAGE_BUGREPORT${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE${ac_uB}PACKAGE${ac_uC}"libatomic_ops"${ac_uD}
-${ac_uA}VERSION${ac_uB}VERSION${ac_uC}"1.1"${ac_uD}
-${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_STAT_H${ac_uB}HAVE_SYS_STAT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDLIB_H${ac_uB}HAVE_STDLIB_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRING_H${ac_uB}HAVE_STRING_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_MEMORY_H${ac_uB}HAVE_MEMORY_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRINGS_H${ac_uB}HAVE_STRINGS_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_INTTYPES_H${ac_uB}HAVE_INTTYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDINT_H${ac_uB}HAVE_STDINT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDLIB_H${ac_uB}HAVE_STDLIB_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_GETPAGESIZE${ac_uB}HAVE_GETPAGESIZE${ac_uC}1${ac_uD}
-${ac_uA}HAVE_MMAP${ac_uB}HAVE_MMAP${ac_uC}1${ac_uD}
-${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD}
-s,^[    ]*#[    ]*undef[        ][      ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$ac_file" : 'X\(//\)[^/]' \| \
-        X"$ac_file" : 'X\(//\)$' \| \
-        X"$ac_file" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_dir" : 'X\(//\)[^/]' \| \
-        X"$as_dir" : 'X\(//\)$' \| \
-        X"$as_dir" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $ac_file | $ac_file:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X$ac_file : 'X\(//\)[^/]' \| \
-        X$ac_file : 'X\(//\)$' \| \
-        X$ac_file : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X$ac_file |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$ac_dest" : 'X\(//\)[^/]' \| \
-        X"$ac_dest" : 'X\(//\)$' \| \
-        X"$ac_dest" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_dir" : 'X\(//\)[^/]' \| \
-        X"$as_dir" : 'X\(//\)$' \| \
-        X"$as_dir" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # So let's grep whole file.
-  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$mf" : 'X\(//\)[^/]' \| \
-        X"$mf" : 'X\(//\)$' \| \
-        X"$mf" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$file" : 'X\(//\)[^/]' \| \
-        X"$file" : 'X\(//\)$' \| \
-        X"$file" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-        X"$as_dir" : 'X\(//\)[^/]' \| \
-        X"$as_dir" : 'X\(//\)$' \| \
-        X"$as_dir" : 'X\(/\)' \| \
-        .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-         /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-         /^X\(\/\/\)$/{ s//\1/; q; }
-         /^X\(\/\).*/{ s//\1/; q; }
-         s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
- ;;
-    default )  ;;
-  esac
-done
-
-{ (exit 0); exit 0; }