*.pyc
GNUmakefile
Makefile
+Makefile.in
+html/
+/ABOUT-NLS
+/aclocal.m4
+/autom4te.cache
/cleaner.h
+/compile
+/config.guess
/config.h
+/config.h.in
/config.log
/config.status
-html/
+/config.sub
+/configure
+/depcomp
+/doc/recode.info
+/install-sh
/lib/.deps/
/libtool
-/src/.deps/
-/src/.libs/
-/src/recode
-/stamp-h1
+/ltmain.sh
+/m4
+!/m4/ChangeLog
+/missing
/po/Makefile.in
/po/POTFILES
/po/stamp-po
/python/Recode.c
+/src/.deps/
+/src/.libs/
+/src/iconvdecl.h
+/src/merged.c
+/src/recode
+/src/recode.1
+/stamp-h1
/tests/setup.py
+/tests/Recode.so
+++ /dev/null
-1 Notes on the Free Translation Project
-***************************************
-
-Free software is going international! The Free Translation Project is
-a way to get maintainers of free software, translators, and users all
-together, so that free software will gradually become able to speak many
-languages. A few packages already provide translations for their
-messages.
-
- If you found this `ABOUT-NLS' file inside a distribution, you may
-assume that the distributed package does use GNU `gettext' internally,
-itself available at your nearest GNU archive site. But you do _not_
-need to install GNU `gettext' prior to configuring, installing or using
-this package with messages translated.
-
- Installers will find here some useful hints. These notes also
-explain how users should proceed for getting the programs to use the
-available translations. They tell how people wanting to contribute and
-work on translations can contact the appropriate team.
-
-1.1 INSTALL Matters
-===================
-
-Some packages are "localizable" when properly installed; the programs
-they contain can be made to speak your own native language. Most such
-packages use GNU `gettext'. Other packages have their own ways to
-internationalization, predating GNU `gettext'.
-
- By default, this package will be installed to allow translation of
-messages. It will automatically detect whether the system already
-provides the GNU `gettext' functions. Installers may use special
-options at configuration time for changing the default behaviour. The
-command:
-
- ./configure --disable-nls
-
-will _totally_ disable translation of messages.
-
- When you already have GNU `gettext' installed on your system and run
-configure without an option for your new package, `configure' will
-probably detect the previously built and installed `libintl' library
-and will decide to use it. If not, you may have to to use the
-`--with-libintl-prefix' option to tell `configure' where to look for it.
-
- Internationalized packages usually have many `po/LL.po' files, where
-LL gives an ISO 639 two-letter code identifying the language. Unless
-translations have been forbidden at `configure' time by using the
-`--disable-nls' switch, all available translations are installed
-together with the package. However, the environment variable `LINGUAS'
-may be set, prior to configuration, to limit the installed set.
-`LINGUAS' should then contain a space separated list of two-letter
-codes, stating which languages are allowed.
-
-1.2 Using This Package
-======================
-
-As a user, if your language has been installed for this package, you
-only have to set the `LANG' environment variable to the appropriate
-`LL_CC' combination. If you happen to have the `LC_ALL' or some other
-`LC_xxx' environment variables set, you should unset them before
-setting `LANG', otherwise the setting of `LANG' will not have the
-desired effect. Here `LL' is an ISO 639 two-letter language code, and
-`CC' is an ISO 3166 two-letter country code. For example, let's
-suppose that you speak German and live in Germany. At the shell
-prompt, merely execute `setenv LANG de_DE' (in `csh'),
-`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
-This can be done from your `.login' or `.profile' file, once and for
-all.
-
- You might think that the country code specification is redundant.
-But in fact, some languages have dialects in different countries. For
-example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
-country code serves to distinguish the dialects.
-
- The locale naming convention of `LL_CC', with `LL' denoting the
-language and `CC' denoting the country, is the one use on systems based
-on GNU libc. On other systems, some variations of this scheme are
-used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
-locales supported by your system for your language by running the
-command `locale -a | grep '^LL''.
-
- Not all programs have translations for all languages. By default, an
-English message is shown in place of a nonexistent translation. If you
-understand other languages, you can set up a priority list of languages.
-This is done through a different environment variable, called
-`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
-for the purpose of message handling, but you still need to have `LANG'
-set to the primary language; this is required by other parts of the
-system libraries. For example, some Swedish users who would rather
-read translations in German than English for when Swedish is not
-available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
-
- Special advice for Norwegian users: The language code for Norwegian
-bokma*l changed from `no' to `nb' recently (in 2003). During the
-transition period, while some message catalogs for this language are
-installed under `nb' and some older ones under `no', it's recommended
-for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
-older translations are used.
-
- In the `LANGUAGE' environment variable, but not in the `LANG'
-environment variable, `LL_CC' combinations can be abbreviated as `LL'
-to denote the language's main dialect. For example, `de' is equivalent
-to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
-(Portuguese as spoken in Portugal) in this context.
-
-1.3 Translating Teams
-=====================
-
-For the Free Translation Project to be a success, we need interested
-people who like their own language and write it well, and who are also
-able to synergize with other translators speaking the same language.
-Each translation team has its own mailing list. The up-to-date list of
-teams can be found at the Free Translation Project's homepage,
-`http://translationproject.org/', in the "Teams" area.
-
- If you'd like to volunteer to _work_ at translating messages, you
-should become a member of the translating team for your own language.
-The subscribing address is _not_ the same as the list itself, it has
-`-request' appended. For example, speakers of Swedish can send a
-message to `sv-request@li.org', having this message body:
-
- subscribe
-
- Keep in mind that team members are expected to participate
-_actively_ in translations, or at solving translational difficulties,
-rather than merely lurking around. If your team does not exist yet and
-you want to start one, or if you are unsure about what to do or how to
-get started, please write to `coordinator@translationproject.org' to
-reach the coordinator for all translator teams.
-
- The English team is special. It works at improving and uniformizing
-the terminology in use. Proven linguistic skills are praised more than
-programming skills, here.
-
-1.4 Available Packages
-======================
-
-Languages are not equally supported in all packages. The following
-matrix shows the current state of internationalization, as of June
-2010. The matrix shows, in regard of each package, for which languages
-PO files have been submitted to translation coordination, with a
-translation percentage of at least 50%.
-
- Ready PO files af am an ar as ast az be be@latin bg bn_IN bs ca
- +--------------------------------------------------+
- a2ps | [] [] |
- aegis | |
- ant-phone | |
- anubis | |
- aspell | [] [] |
- bash | |
- bfd | |
- bibshelf | [] |
- binutils | |
- bison | |
- bison-runtime | [] |
- bluez-pin | [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] [] |
- cpio | |
- cppi | |
- cpplib | [] |
- cryptsetup | |
- dfarc | |
- dialog | [] [] |
- dico | |
- diffutils | [] |
- dink | |
- doodle | |
- e2fsprogs | [] |
- enscript | [] |
- exif | |
- fetchmail | [] |
- findutils | [] |
- flex | [] |
- freedink | |
- gas | |
- gawk | [] [] |
- gcal | [] |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] |
- gettext-tools | [] [] |
- gip | [] |
- gjay | |
- gliv | [] |
- glunarclock | [] [] |
- gnubiff | |
- gnucash | [] |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | |
- gold | |
- gpe-aerial | |
- gpe-beam | |
- gpe-bluetooth | |
- gpe-calendar | |
- gpe-clock | [] |
- gpe-conf | |
- gpe-contacts | |
- gpe-edit | |
- gpe-filemanager | |
- gpe-go | |
- gpe-login | |
- gpe-ownerinfo | [] |
- gpe-package | |
- gpe-sketchbook | |
- gpe-su | [] |
- gpe-taskmanager | [] |
- gpe-timesheet | [] |
- gpe-today | [] |
- gpe-todo | |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | [] [] |
- gsasl | |
- gss | |
- gst-plugins-bad | [] |
- gst-plugins-base | [] |
- gst-plugins-good | [] |
- gst-plugins-ugly | [] |
- gstreamer | [] [] [] |
- gtick | |
- gtkam | [] |
- gtkorphan | [] |
- gtkspell | [] [] [] |
- gutenprint | |
- hello | [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | [] [] |
- iso_15924 | |
- iso_3166 | [] [] [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | |
- iso_639 | [] [] [] [] |
- iso_639_3 | |
- jwhois | |
- kbd | |
- keytouch | [] |
- keytouch-editor | |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | |
- ld | [] |
- leafpad | [] [] |
- libc | [] [] |
- libexif | () |
- libextractor | |
- libgnutls | |
- libgpewidget | |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | [] |
- libidn | |
- lifelines | |
- liferea | [] [] |
- lilypond | |
- linkdr | [] |
- lordsawar | |
- lprng | |
- lynx | [] |
- m4 | |
- mailfromd | |
- mailutils | |
- make | |
- man-db | |
- man-db-manpages | |
- minicom | |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | |
- psmisc | |
- pspp | [] |
- pwdutils | |
- radius | [] |
- recode | [] [] |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] |
- sed | [] [] |
- sharutils | [] [] |
- shishi | |
- skencil | |
- solfege | |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | |
- tar | [] |
- texinfo | |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] [] |
- wyslij-po | |
- xchat | [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] |
- +--------------------------------------------------+
- af am an ar as ast az be be@latin bg bn_IN bs ca
- 6 0 1 2 3 19 1 10 3 28 3 1 38
-
- crh cs da de el en en_GB en_ZA eo es et eu fa
- +-------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] () |
- anubis | [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] [] |
- bfd | [] |
- bibshelf | [] [] [] |
- binutils | [] |
- bison | [] [] |
- bison-runtime | [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] [] [] |
- cflow | [] [] |
- clisp | [] [] [] [] |
- coreutils | [] [] [] [] |
- cpio | |
- cppi | |
- cpplib | [] [] [] |
- cryptsetup | [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] |
- dink | [] [] [] |
- doodle | [] |
- e2fsprogs | [] [] [] |
- enscript | [] [] [] |
- exif | () [] [] |
- fetchmail | [] [] () [] [] [] |
- findutils | [] [] [] |
- flex | [] [] |
- freedink | [] [] [] |
- gas | [] |
- gawk | [] [] [] |
- gcal | [] |
- gcc | [] [] |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] [] [] [] |
- gettext-tools | [] [] [] |
- gip | [] [] [] [] |
- gjay | [] |
- gliv | [] [] [] |
- glunarclock | [] [] |
- gnubiff | () |
- gnucash | [] () () () () |
- gnuedu | [] [] |
- gnulib | [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] |
- gpe-aerial | [] [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] |
- gpe-conf | [] [] [] |
- gpe-contacts | [] [] [] |
- gpe-edit | [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] |
- gpe-taskmanager | [] [] [] [] |
- gpe-timesheet | [] [] [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] () [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] |
- grub | [] [] |
- gsasl | [] |
- gss | |
- gst-plugins-bad | [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] () [] |
- gtkam | [] [] () [] [] |
- gtkorphan | [] [] [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | [] [] [] |
- hello | [] [] [] [] |
- help2man | [] |
- hylafax | [] [] |
- idutils | [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] [] [] [] () [] [] [] () |
- iso_3166_2 | () |
- iso_4217 | [] [] [] () [] [] |
- iso_639 | [] [] [] [] () [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | [] [] [] [] [] |
- keytouch | [] [] |
- keytouch-editor | [] [] |
- keytouch-keyboa... | [] |
- klavaro | [] [] [] [] |
- latrine | [] () |
- ld | [] [] |
- leafpad | [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] () |
- libgphoto2_port | [] () [] |
- libgsasl | |
- libiconv | [] [] [] [] [] |
- libidn | [] [] [] |
- lifelines | [] () |
- liferea | [] [] [] [] [] |
- lilypond | [] [] [] |
- linkdr | [] [] [] |
- lordsawar | [] |
- lprng | |
- lynx | [] [] [] [] |
- m4 | [] [] [] [] |
- mailfromd | |
- mailutils | [] |
- make | [] [] [] |
- man-db | |
- man-db-manpages | |
- minicom | [] [] [] [] |
- mkisofs | |
- myserver | |
- nano | [] [] [] |
- opcodes | [] [] |
- parted | [] [] |
- pies | |
- popt | [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] |
- pwdutils | [] |
- radius | [] |
- recode | [] [] [] [] [] [] |
- rosegarden | () () () |
- rpm | [] [] [] |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] |
- sed | [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | |
- skencil | [] () [] |
- solfege | [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] [] |
- sp | [] |
- sysstat | [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] |
- tin | [] [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] |
- vice | () () |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] |
- wyslij-po | |
- xchat | [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] [] |
- +-------------------------------------------------+
- crh cs da de el en en_GB en_ZA eo es et eu fa
- 5 64 105 117 18 1 8 0 28 89 18 19 0
-
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- +----------------------------------------------------+
- a2ps | [] [] [] [] |
- aegis | [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] [] |
- aspell | [] [] [] [] |
- bash | [] [] [] [] |
- bfd | [] [] [] |
- bibshelf | [] [] [] [] [] |
- binutils | [] [] [] |
- bison | [] [] [] [] |
- bison-runtime | [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] |
- buzztard | [] |
- cflow | [] [] [] |
- clisp | [] |
- coreutils | [] [] [] [] [] |
- cpio | [] [] [] [] |
- cppi | [] [] |
- cpplib | [] [] [] |
- cryptsetup | [] [] [] |
- dfarc | [] [] [] |
- dialog | [] [] [] [] [] [] [] |
- dico | |
- diffutils | [] [] [] [] [] [] [] [] [] |
- dink | [] |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] |
- exif | [] [] [] [] [] [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] [] |
- flex | [] [] [] |
- freedink | [] [] [] |
- gas | [] [] |
- gawk | [] [] [] [] () [] |
- gcal | [] |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] |
- gip | [] [] [] [] [] [] |
- gjay | [] |
- gliv | [] () |
- glunarclock | [] [] [] [] |
- gnubiff | () [] () |
- gnucash | () () () () () [] |
- gnuedu | [] [] |
- gnulib | [] [] [] [] [] [] |
- gnunet | |
- gnunet-gtk | [] |
- gnutls | [] [] |
- gold | [] [] |
- gpe-aerial | [] [] [] |
- gpe-beam | [] [] [] [] |
- gpe-bluetooth | [] [] [] [] |
- gpe-calendar | [] [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] [] [] |
- gpe-contacts | [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] [] |
- gpe-go | [] [] [] [] [] |
- gpe-login | [] [] [] |
- gpe-ownerinfo | [] [] [] [] [] |
- gpe-package | [] [] [] |
- gpe-sketchbook | [] [] [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] |
- gphoto2 | [] [] [] [] [] [] |
- gprof | [] [] [] [] |
- gpsdrive | [] [] [] |
- gramadoir | [] [] [] |
- grep | [] [] |
- grub | [] [] [] [] |
- gsasl | [] [] [] [] [] |
- gss | [] [] [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] [] [] |
- gtkam | [] [] [] [] [] |
- gtkorphan | [] [] [] |
- gtkspell | [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] [] [] |
- hello | [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] [] |
- iso_15924 | [] () [] [] |
- iso_3166 | [] () [] [] [] [] [] [] [] [] [] [] |
- iso_3166_2 | () [] [] [] |
- iso_4217 | [] () [] [] [] [] |
- iso_639 | [] () [] [] [] [] [] [] [] |
- iso_639_3 | () [] [] |
- jwhois | [] [] [] [] [] |
- kbd | [] [] |
- keytouch | [] [] [] [] [] [] |
- keytouch-editor | [] [] [] [] [] |
- keytouch-keyboa... | [] [] [] [] [] |
- klavaro | [] [] |
- latrine | [] [] [] |
- ld | [] [] [] [] |
- leafpad | [] [] [] [] [] [] [] () |
- libc | [] [] [] [] [] |
- libexif | [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] [] |
- libgphoto2_port | [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] [] |
- libidn | [] [] [] [] |
- lifelines | () |
- liferea | [] [] [] [] |
- lilypond | [] [] |
- linkdr | [] [] [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] [] [] |
- m4 | [] [] [] [] [] [] |
- mailfromd | |
- mailutils | [] [] |
- make | [] [] [] [] [] [] [] [] [] |
- man-db | [] [] |
- man-db-manpages | [] |
- minicom | [] [] [] [] [] |
- mkisofs | [] [] [] [] |
- myserver | |
- nano | [] [] [] [] [] [] |
- opcodes | [] [] [] [] |
- parted | [] [] [] [] |
- pies | |
- popt | [] [] [] [] [] [] [] [] [] |
- psmisc | [] [] [] |
- pspp | |
- pwdutils | [] [] |
- radius | [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () () () () |
- rpm | [] [] |
- rush | |
- sarg | [] |
- screem | [] [] |
- scrollkeeper | [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] [] [] [] |
- shishi | [] |
- skencil | [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] |
- soundtracker | [] [] |
- sp | [] () |
- sysstat | [] [] [] [] [] |
- tar | [] [] [] [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | [] [] |
- util-linux-ng | [] [] [] [] [] [] |
- vice | () () () |
- vmm | [] |
- vorbis-tools | [] |
- wastesedge | () () |
- wdiff | [] |
- wget | [] [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] [] [] |
- +----------------------------------------------------+
- fi fr ga gl gu he hi hr hu hy id is it ja ka kn
- 105 121 53 20 4 8 3 5 53 2 120 5 84 67 0 4
-
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- +-----------------------------------------------+
- a2ps | [] |
- aegis | |
- ant-phone | |
- anubis | [] [] |
- aspell | [] |
- bash | |
- bfd | |
- bibshelf | [] [] |
- binutils | |
- bison | [] |
- bison-runtime | [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] |
- bombono-dvd | |
- buzztard | |
- cflow | |
- clisp | |
- coreutils | [] |
- cpio | |
- cppi | |
- cpplib | |
- cryptsetup | |
- dfarc | [] |
- dialog | [] [] [] [] [] |
- dico | |
- diffutils | [] [] |
- dink | |
- doodle | |
- e2fsprogs | |
- enscript | |
- exif | [] |
- fetchmail | |
- findutils | |
- flex | |
- freedink | [] |
- gas | |
- gawk | |
- gcal | |
- gcc | |
- gettext-examples | [] [] [] [] |
- gettext-runtime | [] |
- gettext-tools | [] |
- gip | [] [] |
- gjay | |
- gliv | |
- glunarclock | [] |
- gnubiff | |
- gnucash | () () () () |
- gnuedu | |
- gnulib | |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] |
- gold | |
- gpe-aerial | [] |
- gpe-beam | [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] |
- gpe-clock | [] [] [] [] [] |
- gpe-conf | [] [] |
- gpe-contacts | [] [] |
- gpe-edit | [] |
- gpe-filemanager | [] [] |
- gpe-go | [] [] [] |
- gpe-login | [] |
- gpe-ownerinfo | [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] |
- gpe-su | [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] |
- gpe-timesheet | [] [] |
- gpe-today | [] [] [] [] |
- gpe-todo | [] [] |
- gphoto2 | |
- gprof | [] |
- gpsdrive | |
- gramadoir | |
- grep | |
- grub | |
- gsasl | |
- gss | |
- gst-plugins-bad | [] [] [] [] |
- gst-plugins-base | [] [] |
- gst-plugins-good | [] [] |
- gst-plugins-ugly | [] [] [] [] [] |
- gstreamer | |
- gtick | |
- gtkam | [] |
- gtkorphan | [] [] |
- gtkspell | [] [] [] [] [] [] [] |
- gutenprint | |
- hello | [] [] [] |
- help2man | |
- hylafax | |
- idutils | |
- indent | |
- iso_15924 | [] [] |
- iso_3166 | [] [] () [] [] [] [] [] |
- iso_3166_2 | |
- iso_4217 | [] [] |
- iso_639 | [] [] |
- iso_639_3 | [] |
- jwhois | [] |
- kbd | |
- keytouch | [] |
- keytouch-editor | [] |
- keytouch-keyboa... | [] |
- klavaro | [] |
- latrine | [] |
- ld | |
- leafpad | [] [] [] |
- libc | [] |
- libexif | |
- libextractor | |
- libgnutls | [] |
- libgpewidget | [] [] |
- libgpg-error | |
- libgphoto2 | |
- libgphoto2_port | |
- libgsasl | |
- libiconv | |
- libidn | |
- lifelines | |
- liferea | |
- lilypond | |
- linkdr | |
- lordsawar | |
- lprng | |
- lynx | |
- m4 | |
- mailfromd | |
- mailutils | |
- make | [] |
- man-db | |
- man-db-manpages | |
- minicom | [] |
- mkisofs | |
- myserver | |
- nano | [] [] |
- opcodes | |
- parted | |
- pies | |
- popt | [] [] [] |
- psmisc | |
- pspp | |
- pwdutils | |
- radius | |
- recode | |
- rosegarden | |
- rpm | |
- rush | |
- sarg | |
- screem | |
- scrollkeeper | [] [] |
- sed | |
- sharutils | |
- shishi | |
- skencil | |
- solfege | [] |
- solfege-manual | |
- soundtracker | |
- sp | |
- sysstat | [] |
- tar | [] |
- texinfo | [] |
- tin | |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | |
- vice | |
- vmm | |
- vorbis-tools | |
- wastesedge | |
- wdiff | |
- wget | [] |
- wyslij-po | |
- xchat | [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +-----------------------------------------------+
- ko ku ky lg lt lv mk ml mn mr ms mt nb nds ne
- 20 5 10 1 13 48 4 2 2 4 24 10 20 3 1
-
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] [] [] [] |
- aegis | [] [] [] |
- ant-phone | [] [] |
- anubis | [] [] [] |
- aspell | [] [] [] [] [] |
- bash | [] [] |
- bfd | [] |
- bibshelf | [] [] |
- binutils | [] [] |
- bison | [] [] [] |
- bison-runtime | [] [] [] [] [] [] [] |
- bluez-pin | [] [] [] [] [] [] [] [] |
- bombono-dvd | [] () |
- buzztard | [] [] |
- cflow | [] |
- clisp | [] [] |
- coreutils | [] [] [] [] [] [] |
- cpio | [] [] [] |
- cppi | [] |
- cpplib | [] |
- cryptsetup | [] |
- dfarc | [] |
- dialog | [] [] [] [] |
- dico | [] |
- diffutils | [] [] [] [] [] [] |
- dink | () |
- doodle | [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] [] |
- exif | [] [] [] () [] |
- fetchmail | [] [] [] [] |
- findutils | [] [] [] [] [] |
- flex | [] [] [] [] [] |
- freedink | [] [] |
- gas | |
- gawk | [] [] [] [] |
- gcal | |
- gcc | [] |
- gettext-examples | [] [] [] [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] [] [] [] [] |
- gettext-tools | [] [] [] [] [] [] |
- gip | [] [] [] [] [] |
- gjay | |
- gliv | [] [] [] [] [] [] |
- glunarclock | [] [] [] [] [] |
- gnubiff | [] () |
- gnucash | [] () () () |
- gnuedu | [] |
- gnulib | [] [] [] [] |
- gnunet | |
- gnunet-gtk | |
- gnutls | [] [] |
- gold | |
- gpe-aerial | [] [] [] [] [] [] [] |
- gpe-beam | [] [] [] [] [] [] [] |
- gpe-bluetooth | [] [] |
- gpe-calendar | [] [] [] [] |
- gpe-clock | [] [] [] [] [] [] [] [] |
- gpe-conf | [] [] [] [] [] [] [] |
- gpe-contacts | [] [] [] [] [] |
- gpe-edit | [] [] [] |
- gpe-filemanager | [] [] [] |
- gpe-go | [] [] [] [] [] [] [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] [] [] [] [] [] [] |
- gpe-package | [] [] |
- gpe-sketchbook | [] [] [] [] [] [] [] |
- gpe-su | [] [] [] [] [] [] [] [] |
- gpe-taskmanager | [] [] [] [] [] [] [] [] |
- gpe-timesheet | [] [] [] [] [] [] [] [] |
- gpe-today | [] [] [] [] [] [] [] [] |
- gpe-todo | [] [] [] [] [] |
- gphoto2 | [] [] [] [] [] [] [] [] |
- gprof | [] [] [] |
- gpsdrive | [] [] |
- gramadoir | [] [] |
- grep | [] [] [] [] |
- grub | [] [] [] |
- gsasl | [] [] [] [] |
- gss | [] [] [] |
- gst-plugins-bad | [] [] [] [] [] [] |
- gst-plugins-base | [] [] [] [] [] |
- gst-plugins-good | [] [] [] [] [] |
- gst-plugins-ugly | [] [] [] [] [] [] |
- gstreamer | [] [] [] [] [] |
- gtick | [] [] [] |
- gtkam | [] [] [] [] [] [] |
- gtkorphan | [] |
- gtkspell | [] [] [] [] [] [] [] [] [] [] |
- gutenprint | [] [] |
- hello | [] [] [] [] |
- help2man | [] [] |
- hylafax | [] |
- idutils | [] [] [] [] [] |
- indent | [] [] [] [] [] [] [] |
- iso_15924 | [] [] [] [] |
- iso_3166 | [] [] [] [] [] () [] [] [] [] [] [] [] [] |
- iso_3166_2 | [] [] [] |
- iso_4217 | [] [] [] [] [] [] [] [] |
- iso_639 | [] [] [] [] [] [] [] [] [] |
- iso_639_3 | [] [] |
- jwhois | [] [] [] [] |
- kbd | [] [] [] |
- keytouch | [] [] [] |
- keytouch-editor | [] [] [] |
- keytouch-keyboa... | [] [] [] |
- klavaro | [] [] |
- latrine | [] [] |
- ld | |
- leafpad | [] [] [] [] [] [] [] [] [] |
- libc | [] [] [] [] |
- libexif | [] [] () [] |
- libextractor | |
- libgnutls | [] [] |
- libgpewidget | [] [] [] |
- libgpg-error | [] [] |
- libgphoto2 | [] [] |
- libgphoto2_port | [] [] [] [] [] |
- libgsasl | [] [] [] [] [] |
- libiconv | [] [] [] [] [] |
- libidn | [] [] |
- lifelines | [] [] |
- liferea | [] [] [] [] [] () () [] |
- lilypond | [] |
- linkdr | [] [] [] |
- lordsawar | |
- lprng | [] |
- lynx | [] [] [] |
- m4 | [] [] [] [] [] |
- mailfromd | [] |
- mailutils | [] |
- make | [] [] [] [] |
- man-db | [] [] [] |
- man-db-manpages | [] [] [] |
- minicom | [] [] [] [] |
- mkisofs | [] [] [] |
- myserver | |
- nano | [] [] [] [] |
- opcodes | [] [] |
- parted | [] [] [] [] |
- pies | [] |
- popt | [] [] [] [] |
- psmisc | [] [] [] |
- pspp | [] [] |
- pwdutils | [] |
- radius | [] [] [] |
- recode | [] [] [] [] [] [] [] [] |
- rosegarden | () () |
- rpm | [] [] [] |
- rush | [] [] |
- sarg | |
- screem | |
- scrollkeeper | [] [] [] [] [] [] [] [] |
- sed | [] [] [] [] [] [] [] [] [] |
- sharutils | [] [] [] [] |
- shishi | [] |
- skencil | [] [] |
- solfege | [] [] [] [] |
- solfege-manual | [] [] [] |
- soundtracker | [] |
- sp | |
- sysstat | [] [] [] [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] [] |
- tin | [] |
- unicode-han-tra... | |
- unicode-transla... | |
- util-linux-ng | [] [] [] [] [] |
- vice | [] |
- vmm | [] |
- vorbis-tools | [] [] |
- wastesedge | [] |
- wdiff | [] [] |
- wget | [] [] [] [] [] [] [] |
- wyslij-po | [] [] [] |
- xchat | [] [] [] [] [] [] [] [] [] |
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] [] [] [] [] |
- xkeyboard-config | [] [] [] |
- +---------------------------------------------------+
- nl nn or pa pl ps pt pt_BR ro ru rw sk sl sq sr
- 135 10 4 7 105 1 29 62 47 91 3 54 46 9 37
-
- sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- +---------------------------------------------------+
- a2ps | [] [] [] [] [] | 27
- aegis | [] | 9
- ant-phone | [] [] [] [] | 9
- anubis | [] [] [] [] | 15
- aspell | [] [] [] | 20
- bash | [] [] [] | 12
- bfd | [] | 6
- bibshelf | [] [] [] | 16
- binutils | [] [] | 8
- bison | [] [] | 12
- bison-runtime | [] [] [] [] [] [] | 29
- bluez-pin | [] [] [] [] [] [] [] [] | 37
- bombono-dvd | [] | 4
- buzztard | [] | 7
- cflow | [] [] [] | 9
- clisp | | 10
- coreutils | [] [] [] [] | 22
- cpio | [] [] [] [] [] [] | 13
- cppi | [] [] | 5
- cpplib | [] [] [] [] [] [] | 14
- cryptsetup | [] [] | 7
- dfarc | [] | 9
- dialog | [] [] [] [] [] [] [] | 30
- dico | [] | 2
- diffutils | [] [] [] [] [] [] | 30
- dink | | 4
- doodle | [] [] | 7
- e2fsprogs | [] [] [] | 11
- enscript | [] [] [] [] | 17
- exif | [] [] [] | 16
- fetchmail | [] [] [] | 17
- findutils | [] [] [] [] [] | 20
- flex | [] [] [] [] | 15
- freedink | [] | 10
- gas | [] | 4
- gawk | [] [] [] [] | 18
- gcal | [] [] | 5
- gcc | [] [] [] | 7
- gettext-examples | [] [] [] [] [] [] [] | 34
- gettext-runtime | [] [] [] [] [] [] [] | 29
- gettext-tools | [] [] [] [] [] [] | 22
- gip | [] [] [] [] | 22
- gjay | [] | 3
- gliv | [] [] [] | 14
- glunarclock | [] [] [] [] [] | 19
- gnubiff | [] [] | 4
- gnucash | () [] () [] () | 10
- gnuedu | [] [] | 7
- gnulib | [] [] [] [] | 16
- gnunet | [] | 1
- gnunet-gtk | [] [] [] | 5
- gnutls | [] [] [] | 10
- gold | [] | 4
- gpe-aerial | [] [] [] | 18
- gpe-beam | [] [] [] | 19
- gpe-bluetooth | [] [] [] | 13
- gpe-calendar | [] [] [] [] | 12
- gpe-clock | [] [] [] [] [] | 28
- gpe-conf | [] [] [] [] | 20
- gpe-contacts | [] [] [] | 17
- gpe-edit | [] [] [] | 12
- gpe-filemanager | [] [] [] [] | 16
- gpe-go | [] [] [] [] [] | 25
- gpe-login | [] [] [] | 11
- gpe-ownerinfo | [] [] [] [] [] | 25
- gpe-package | [] [] [] | 13
- gpe-sketchbook | [] [] [] | 20
- gpe-su | [] [] [] [] [] | 30
- gpe-taskmanager | [] [] [] [] [] | 29
- gpe-timesheet | [] [] [] [] [] | 25
- gpe-today | [] [] [] [] [] [] | 30
- gpe-todo | [] [] [] [] | 17
- gphoto2 | [] [] [] [] [] | 24
- gprof | [] [] [] | 15
- gpsdrive | [] [] [] | 11
- gramadoir | [] [] [] | 11
- grep | [] [] [] | 10
- grub | [] [] [] | 14
- gsasl | [] [] [] [] | 14
- gss | [] [] [] | 11
- gst-plugins-bad | [] [] [] [] | 26
- gst-plugins-base | [] [] [] [] [] | 24
- gst-plugins-good | [] [] [] [] | 24
- gst-plugins-ugly | [] [] [] [] [] | 29
- gstreamer | [] [] [] [] | 22
- gtick | [] [] [] | 13
- gtkam | [] [] [] | 20
- gtkorphan | [] [] [] | 14
- gtkspell | [] [] [] [] [] [] [] [] [] | 45
- gutenprint | [] | 10
- hello | [] [] [] [] [] [] | 21
- help2man | [] [] | 7
- hylafax | [] | 5
- idutils | [] [] [] [] | 17
- indent | [] [] [] [] [] [] | 30
- iso_15924 | () [] () [] [] | 16
- iso_3166 | [] [] () [] [] () [] [] [] () | 53
- iso_3166_2 | () [] () [] | 9
- iso_4217 | [] () [] [] () [] [] | 26
- iso_639 | [] [] [] () [] () [] [] [] [] | 38
- iso_639_3 | [] () | 8
- jwhois | [] [] [] [] [] | 16
- kbd | [] [] [] [] [] | 15
- keytouch | [] [] [] | 16
- keytouch-editor | [] [] [] | 14
- keytouch-keyboa... | [] [] [] | 14
- klavaro | [] | 11
- latrine | [] [] [] | 10
- ld | [] [] [] [] | 11
- leafpad | [] [] [] [] [] [] | 33
- libc | [] [] [] [] [] | 21
- libexif | [] () | 7
- libextractor | [] | 1
- libgnutls | [] [] [] | 9
- libgpewidget | [] [] [] | 14
- libgpg-error | [] [] [] | 9
- libgphoto2 | [] [] | 8
- libgphoto2_port | [] [] [] [] | 14
- libgsasl | [] [] [] | 13
- libiconv | [] [] [] [] | 21
- libidn | () [] [] | 11
- lifelines | [] | 4
- liferea | [] [] [] | 21
- lilypond | [] | 7
- linkdr | [] [] [] [] [] | 17
- lordsawar | | 1
- lprng | [] | 3
- lynx | [] [] [] [] | 17
- m4 | [] [] [] [] | 19
- mailfromd | [] [] | 3
- mailutils | [] | 5
- make | [] [] [] [] | 21
- man-db | [] [] [] | 8
- man-db-manpages | | 4
- minicom | [] [] | 16
- mkisofs | [] [] | 9
- myserver | | 0
- nano | [] [] [] [] | 21
- opcodes | [] [] [] | 11
- parted | [] [] [] [] [] | 15
- pies | [] [] | 3
- popt | [] [] [] [] [] [] | 27
- psmisc | [] [] | 11
- pspp | | 4
- pwdutils | [] [] | 6
- radius | [] [] | 9
- recode | [] [] [] [] | 28
- rosegarden | () | 0
- rpm | [] [] [] | 11
- rush | [] [] | 4
- sarg | | 1
- screem | [] | 3
- scrollkeeper | [] [] [] [] [] | 27
- sed | [] [] [] [] [] | 30
- sharutils | [] [] [] [] [] | 22
- shishi | [] | 3
- skencil | [] [] | 7
- solfege | [] [] [] [] | 16
- solfege-manual | [] | 8
- soundtracker | [] [] [] | 9
- sp | [] | 3
- sysstat | [] [] | 15
- tar | [] [] [] [] [] [] | 23
- texinfo | [] [] [] [] [] | 17
- tin | | 4
- unicode-han-tra... | | 0
- unicode-transla... | | 2
- util-linux-ng | [] [] [] [] | 20
- vice | () () | 1
- vmm | [] | 4
- vorbis-tools | [] | 6
- wastesedge | | 2
- wdiff | [] [] | 7
- wget | [] [] [] [] [] | 26
- wyslij-po | [] [] | 8
- xchat | [] [] [] [] [] [] | 36
- xdg-user-dirs | [] [] [] [] [] [] [] [] [] [] | 63
- xkeyboard-config | [] [] [] | 22
- +---------------------------------------------------+
- 85 teams sv sw ta te tg th tr uk vi wa zh_CN zh_HK zh_TW
- 178 domains 119 1 3 3 0 10 65 51 155 17 98 7 41 2618
-
- Some counters in the preceding matrix are higher than the number of
-visible blocks let us expect. This is because a few extra PO files are
-used for implementing regional variants of languages, or language
-dialects.
-
- For a PO file in the matrix above to be effective, the package to
-which it applies should also have been internationalized and
-distributed as such by its maintainer. There might be an observable
-lag between the mere existence a PO file and its wide availability in a
-distribution.
-
- If June 2010 seems to be old, you may fetch a more recent copy of
-this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
-matrix with full percentage details can be found at
-`http://translationproject.org/extra/matrix.html'.
-
-1.5 Using `gettext' in new packages
-===================================
-
-If you are writing a freely available program and want to
-internationalize it you are welcome to use GNU `gettext' in your
-package. Of course you have to respect the GNU Library General Public
-License which covers the use of the GNU `gettext' library. This means
-in particular that even non-free programs can use `libintl' as a shared
-library, whereas only free software can use `libintl' as a static
-library or use modified versions of `libintl'.
-
- Once the sources are changed appropriately and the setup can handle
-the use of `gettext' the only thing missing are the translations. The
-Free Translation Project is also available for packages which are not
-developed inside the GNU project. Therefore the information given above
-applies also for every other Free Software Project. Contact
-`coordinator@translationproject.org' to make the `.pot' files available
-to the translation teams.
-
+++ /dev/null
-# Makefile.in generated by automake 1.13.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Main Makefile for Recode.
-# Copyright © 1992,93,94,95,96,97,98,99,00 Free Software Foundation, Inc.
-# François Pinard <pinard@iro.umontreal.ca>, 1992.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = .
-DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog THANKS \
- $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/config.h.in mkinstalldirs $(srcdir)/cleaner.h.in \
- ABOUT-NLS COPYING TODO config.guess config.rpath config.sub \
- depcomp install-sh missing ltmain.sh ltconfig
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/malloc.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/realloc.m4 \
- $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = cleaner.h
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
- ctags-recursive dvi-recursive html-recursive info-recursive \
- install-data-recursive install-dvi-recursive \
- install-exec-recursive install-html-recursive \
- install-info-recursive install-pdf-recursive \
- install-ps-recursive install-recursive installcheck-recursive \
- installdirs-recursive pdf-recursive ps-recursive \
- tags-recursive uninstall-recursive
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
- distclean-recursive maintainer-clean-recursive
-am__recursive_targets = \
- $(RECURSIVE_TARGETS) \
- $(RECURSIVE_CLEAN_TARGETS) \
- $(am__extra_recursive_targets)
-AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- cscope distdir dist dist-all distcheck
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
- $(LISP)config.h.in
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- if test -d "$(distdir)"; then \
- find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -rf "$(distdir)" \
- || { sleep 5 && rm -rf "$(distdir)"; }; \
- else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
- dir0=`pwd`; \
- sed_first='s,^\([^/]*\)/.*$$,\1,'; \
- sed_rest='s,^[^/]*/*,,'; \
- sed_last='s,^.*/\([^/]*\)$$,\1,'; \
- sed_butlast='s,/*[^/]*$$,,'; \
- while test -n "$$dir1"; do \
- first=`echo "$$dir1" | sed -e "$$sed_first"`; \
- if test "$$first" != "."; then \
- if test "$$first" = ".."; then \
- dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
- dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
- else \
- first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
- if test "$$first2" = "$$first"; then \
- dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
- else \
- dir2="../$$dir2"; \
- fi; \
- dir0="$$dir0"/"$$first"; \
- fi; \
- fi; \
- dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
- done; \
- reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
- | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = ./aclocal.sh @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = gnits
-ACLOCAL_AMFLAGS = -I m4
-EXTRA_DIST = COPYING-LIB aclocal.sh after-patch.py after-patch.sh \
-m4/ChangeLog tables.py \
-keld/NomsSeulsfinal.lst keld/charsets.def keld/control.def \
-keld/iso10646.def keld/mnemonics,ds keld/other.def keld/rfc1345.txt
-
-SUBDIRS = doc lib po src tests contrib
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
- @:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnits'; \
- $(am__cd) $(srcdir) && $(AUTOMAKE) --gnits \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: $(am__configure_deps)
- $(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
- @if test ! -f $@; then rm -f stamp-h1; else :; fi
- @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: $(am__configure_deps)
- ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-cleaner.h: $(top_builddir)/config.status $(srcdir)/cleaner.h.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool config.lt
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-# (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(am__recursive_targets):
- @fail=; \
- if $(am__make_keepgoing); then \
- failcom='fail=yes'; \
- else \
- failcom='exit 1'; \
- fi; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-recursive
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-recursive
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscope: cscope.files
- test ! -s cscope.files \
- || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-clean-cscope:
- -rm -f cscope.files
-cscope.files: clean-cscope cscopelist
-cscopelist: cscopelist-recursive
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
- -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
- @case `sed 15q $(srcdir)/NEWS` in \
- *"$(VERSION)"*) : ;; \
- *) \
- echo "NEWS not updated; not releasing" 1>&2; \
- exit 1;; \
- esac
- $(am__remove_distdir)
- test -d "$(distdir)" || mkdir "$(distdir)"
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- $(am__make_dryrun) \
- || test -d "$(distdir)/$$subdir" \
- || $(MKDIR_P) "$(distdir)/$$subdir" \
- || exit 1; \
- dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
- $(am__relativize); \
- new_distdir=$$reldir; \
- dir1=$$subdir; dir2="$(top_distdir)"; \
- $(am__relativize); \
- new_top_distdir=$$reldir; \
- echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
- echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
- ($(am__cd) $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$new_top_distdir" \
- distdir="$$new_distdir" \
- am__remove_distdir=: \
- am__skip_length_check=: \
- am__skip_mode_fix=: \
- distdir) \
- || exit 1; \
- fi; \
- done
- -test -n "$(am__skip_mode_fix)" \
- || find "$(distdir)" -type d ! -perm -755 \
- -exec chmod u+rwx,go+rx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r "$(distdir)"
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__post_remove_distdir)
-
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
- $(am__post_remove_distdir)
-
-dist-lzip: distdir
- tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
- $(am__post_remove_distdir)
-
-dist-xz: distdir
- tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
- $(am__post_remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__post_remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__post_remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__post_remove_distdir)
-
-dist dist-all:
- $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
- $(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lz*) \
- lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
- *.tar.xz*) \
- xz -dc $(distdir).tar.xz | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir)
- chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
- chmod a-w $(distdir)
- test -d $(distdir)/_build || exit 0; \
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(AM_DISTCHECK_CONFIGURE_FLAGS) \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
- && cd "$$am__cwd" \
- || exit 1
- $(am__post_remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @test -n '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: trying to run $@ with an empty' \
- '$$(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- $(am__cd) '$(distuninstallcheck_dir)' || { \
- echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
- exit 1; \
- }; \
- test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h all-local
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
- distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(am__recursive_targets) all install-am install-strip
-
-.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
- am--refresh check check-am clean clean-cscope clean-generic \
- clean-libtool cscope cscopelist-am ctags ctags-am dist \
- dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
- dist-xz dist-zip distcheck distclean distclean-generic \
- distclean-hdr distclean-libtool distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-ps \
- install-ps-am install-strip installcheck installcheck-am \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
- uninstall-am
-
-
-# All object files should depend on cleaner.h as well on as config.h.
-# For now at least, if you modify cleaner.h.in, make twice!
-all-local: cleaner.h
-
-get-po-files:
- cd $(top_srcdir) && \
- rsync -Lrtvz translationproject.org::tp/latest/recode/ po
-
-# The following goals for the maintainer of the Recode Web site.
-
-local:
- $(MAKE) -C contrib
- $(MAKE) manual
-
-manual:
- cd $(top_srcdir) \
- && rm -rf web/manual web/manual-tmp \
- && mkdir web/manual web/manual-tmp \
- && makeinfo --html --output=web/manual-tmp doc/recode.texi \
- && cd web/manual-tmp \
- && for file in *.html; do \
- sed 's,href=",href="/manual/,g' $$file > ../manual/$$file; \
- done
- rm -rf $(top_srcdir)/web/manual-tmp
-
-publish:
- (cd $(top_srcdir) && \
- git archive --format=tar --prefix=recode-$(VERSION)/ HEAD .) \
- | gzip > $(top_srcdir)/web/archives/recode-$(VERSION).tar.gz
-
-official: publish
- rm -f $(top_srcdir)/web/archives/recode.tar.gz
- ln -s recode-$(VERSION).tar.gz $(top_srcdir)/web/archives/recode.tar.gz
-
-synchro: local
- du -s --si $(top_srcdir)/.git
- cd $(top_srcdir) && git gc --auto --prune
- du -s --si $(top_srcdir)/.git
- find $(top_srcdir) -name '*~' | xargs rm -fv
- synchro -PD alcyon entretien
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-# generated automatically by aclocal 1.13.3 -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# intlmacosx.m4 serial 3 (gettext-0.18)
-dnl Copyright (C) 2004-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Checks for special options needed on MacOS X.
-dnl Defines INTL_MACOSX_LIBS.
-AC_DEFUN([gt_INTL_MACOSX],
-[
- dnl Check for API introduced in MacOS X 10.2.
- AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
- [gt_cv_func_CFPreferencesCopyAppValue],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_TRY_LINK([#include <CoreFoundation/CFPreferences.h>],
- [CFPreferencesCopyAppValue(NULL, NULL)],
- [gt_cv_func_CFPreferencesCopyAppValue=yes],
- [gt_cv_func_CFPreferencesCopyAppValue=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
- AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
- [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
- fi
- dnl Check for API introduced in MacOS X 10.3.
- AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
- [gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- AC_TRY_LINK([#include <CoreFoundation/CFLocale.h>], [CFLocaleCopyCurrent();],
- [gt_cv_func_CFLocaleCopyCurrent=yes],
- [gt_cv_func_CFLocaleCopyCurrent=no])
- LIBS="$gt_save_LIBS"])
- if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
- [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
- AC_SUBST([INTL_MACOSX_LIBS])
-])
-
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.13'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.13.3], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too. Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.13.3])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory. The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run. This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-# fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-# fails if $ac_aux_dir is absolute,
-# fails when called from a subdirectory in a VPATH build with
-# a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir. In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
-# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-# MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH. The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
- [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
- AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery. Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
- [$1], [CXX], [depcc="$CXX" am_compiler_list=],
- [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
- [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
- [$1], [UPC], [depcc="$UPC" am_compiler_list=],
- [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
- [depcc="$$1" am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
- [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_$1_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
- fi
- am__universal=false
- m4_case([$1], [CC],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac],
- [CXX],
- [case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac])
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_$1_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
- [--enable-dependency-tracking],
- [do not reject slow dependency extractors])
-AS_HELP_STRING(
- [--disable-dependency-tracking],
- [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking. -*- Autoconf -*-
-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
- # Older Autoconf quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
- [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([AM_WITH_DMALLOC],
-[AC_MSG_CHECKING([if malloc debugging is wanted])
-AC_ARG_WITH([dmalloc],
-[AS_HELP_STRING([--with-dmalloc],
- [use dmalloc, as in http://www.dmalloc.com])],
-[if test "$withval" = yes; then
- AC_MSG_RESULT([yes])
- AC_DEFINE([WITH_DMALLOC], [1],
- [Define if using the dmalloc debugging malloc package])
- LIBS="$LIBS -ldmalloc"
- LDFLAGS="$LDFLAGS -g"
-else
- AC_MSG_RESULT([no])
-fi], [AC_MSG_RESULT([no])])
-])
-
-# Do all the work for Automake. -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This macro actually does too much. Some checks are only needed if
-# your package does certain things. But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out. PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition. After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.65])dnl
-dnl Autoconf wants to disallow AM_ names. We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
- [$0: two- and three-arguments forms are deprecated.])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
- m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
- [ok:ok],,
- [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
- [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
- [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
- [_AM_DEPENDENCIES([CC])],
- [m4_define([AC_PROG_CC],
- m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [_AM_DEPENDENCIES([CXX])],
- [m4_define([AC_PROG_CXX],
- m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
- [_AM_DEPENDENCIES([OBJC])],
- [m4_define([AC_PROG_OBJC],
- m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
- [_AM_DEPENDENCIES([OBJCXX])],
- [m4_define([AC_PROG_OBJCXX],
- m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
-])
-AC_REQUIRE([AM_SILENT_RULES])dnl
-dnl The testsuite driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
-dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
- [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated. The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot. For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes. -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it is modern enough.
-# If it is, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
- am_missing_run="$MISSING "
-else
- am_missing_run=
- AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check for 'mkdir -p'.
-AC_DEFUN([AM_PROG_MKDIR_P],
-[AC_PREREQ([2.60])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-dnl FIXME we are no longer going to remove this! adjust warning
-dnl FIXME message accordingly.
-AC_DIAGNOSE([obsolete],
-[$0: this macro is deprecated, and will soon be removed.
-You should use the Autoconf-provided 'AC][_PROG_MKDIR_P' macro instead,
-and use '$(MKDIR_P)' instead of '$(mkdir_p)'in your Makefile.am files.])
-dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
-dnl while keeping a definition of mkdir_p for backward compatibility.
-dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
-dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
-dnl Makefile.ins that do not define MKDIR_P, so we do our own
-dnl adjustment using top_builddir (which is defined more often than
-dnl MKDIR_P).
-AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
-case $mkdir_p in
- [[\\/$]]* | ?:[[\\/]]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-])
-
-# -*- Autoconf -*-
-# Obsolete and "removed" macros, that must however still report explicit
-# error messages when used, to smooth transition.
-#
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-AC_DEFUN([AM_CONFIG_HEADER],
-[AC_DIAGNOSE([obsolete],
-['$0': this macro is obsolete.
-You should use the 'AC][_CONFIG_HEADERS' macro instead.])dnl
-AC_CONFIG_HEADERS($@)])
-
-AC_DEFUN([AM_PROG_CC_STDC],
-[AC_PROG_CC
-am_cv_prog_cc_stdc=$ac_cv_prog_cc_stdc
-AC_DIAGNOSE([obsolete],
-['$0': this macro is obsolete.
-You should simply use the 'AC][_PROG_CC' macro instead.
-Also, your code should no longer depend upon 'am_cv_prog_cc_stdc',
-but upon 'ac_cv_prog_cc_stdc'.])])
-
-AC_DEFUN([AM_C_PROTOTYPES],
- [AC_FATAL([automatic de-ANSI-fication support has been removed])])
-AU_DEFUN([fp_C_PROTOTYPES], [AM_C_PROTOTYPES])
-
-# Helper functions for option handling. -*- Autoconf -*-
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME. Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane. -*- Autoconf -*-
-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[[\\\"\#\$\&\'\`$am_lf]]*)
- AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
- *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
- AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$[*]" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$[*]" != "X $srcdir/configure conftest.file" \
- && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
- alias in your environment])
- fi
- if test "$[2]" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$[2]" = conftest.file
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
- [AC_MSG_CHECKING([that generated files are newer than configure])
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
-AS_HELP_STRING(
- [--enable-silent-rules],
- [less verbose build output (undo: "make V=1")])
-AS_HELP_STRING(
- [--disable-silent-rules],
- [verbose build output (undo: "make V=0")])dnl
-])
-case $enable_silent_rules in @%:@ (((
- yes) AM_DEFAULT_VERBOSITY=0;;
- no) AM_DEFAULT_VERBOSITY=1;;
- *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
-dnl
-dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
-dnl do not support nested variable expansions.
-dnl See automake bug#9928 and bug#10237.
-am_make=${MAKE-make}
-AC_CACHE_CHECK([whether $am_make supports nested variables],
- [am_cv_make_support_nested_variables],
- [if AS_ECHO([['TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
- @$(TRUE)
-.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
- am_cv_make_support_nested_variables=yes
-else
- am_cv_make_support_nested_variables=no
-fi])
-if test $am_cv_make_support_nested_variables = yes; then
- dnl Using '$V' instead of '$(V)' breaks IRIX make.
- AM_V='$(V)'
- AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
- AM_V=$AM_DEFAULT_VERBOSITY
- AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AC_SUBST([AM_V])dnl
-AM_SUBST_NOTMAKE([AM_V])dnl
-AC_SUBST([AM_DEFAULT_V])dnl
-AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
-AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
-AM_BACKSLASH='\'
-AC_SUBST([AM_BACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
-])
-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries. This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
- AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball. -*- Autoconf -*-
-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-# tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-# $(am__untar) < result.tar
-#
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-
-m4_if([$1], [v7],
- [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-
- [m4_case([$1],
- [ustar],
- [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
- # There is notably a 21 bits limit for the UID and the GID. In fact,
- # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
- # and bug#13588).
- am_max_uid=2097151 # 2^21 - 1
- am_max_gid=$am_max_uid
- # The $UID and $GID variables are not portable, so we need to resort
- # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
- # below are definitely unexpected, so allow the users to see them
- # (that is, avoid stderr redirection).
- am_uid=`id -u || echo unknown`
- am_gid=`id -g || echo unknown`
- AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
- if test $am_uid -le $am_max_uid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi
- AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
- if test $am_gid -le $am_max_gid; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- _am_tools=none
- fi],
-
- [pax],
- [],
-
- [m4_fatal([Unknown tar format])])
-
- AC_MSG_CHECKING([how to create a $1 tar archive])
-
- # Go ahead even if we have the value already cached. We do so because we
- # need to set the values for the 'am__tar' and 'am__untar' variables.
- _am_tools=${am_cv_prog_tar_$1-$_am_tools}
-
- for _am_tool in $_am_tools; do
- case $_am_tool in
- gnutar)
- for _am_tar in tar gnutar gtar; do
- AM_RUN_LOG([$_am_tar --version]) && break
- done
- am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
- am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
- am__untar="$_am_tar -xf -"
- ;;
- plaintar)
- # Must skip GNU tar: if it does not support --format= it doesn't create
- # ustar tarball either.
- (tar --version) >/dev/null 2>&1 && continue
- am__tar='tar chf - "$$tardir"'
- am__tar_='tar chf - "$tardir"'
- am__untar='tar xf -'
- ;;
- pax)
- am__tar='pax -L -x $1 -w "$$tardir"'
- am__tar_='pax -L -x $1 -w "$tardir"'
- am__untar='pax -r'
- ;;
- cpio)
- am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
- am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
- am__untar='cpio -i -H $1 -d'
- ;;
- none)
- am__tar=false
- am__tar_=false
- am__untar=false
- ;;
- esac
-
- # If the value was cached, stop now. We just wanted to have am__tar
- # and am__untar set.
- test -n "${am_cv_prog_tar_$1}" && break
-
- # tar/untar a dummy directory, and stop if the command works.
- rm -rf conftest.dir
- mkdir conftest.dir
- echo GrepMe > conftest.dir/file
- AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
- rm -rf conftest.dir
- if test -s conftest.tar; then
- AM_RUN_LOG([$am__untar <conftest.tar])
- AM_RUN_LOG([cat conftest.dir/file])
- grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
- fi
- done
- rm -rf conftest.dir
-
- AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
- AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([m4/codeset.m4])
-m4_include([m4/gettext.m4])
-m4_include([m4/glibc21.m4])
-m4_include([m4/iconv.m4])
-m4_include([m4/lib-ld.m4])
-m4_include([m4/lib-link.m4])
-m4_include([m4/lib-prefix.m4])
-m4_include([m4/libtool.m4])
-m4_include([m4/ltoptions.m4])
-m4_include([m4/ltsugar.m4])
-m4_include([m4/ltversion.m4])
-m4_include([m4/lt~obsolete.m4])
-m4_include([m4/malloc.m4])
-m4_include([m4/nls.m4])
-m4_include([m4/po.m4])
-m4_include([m4/progtest.m4])
-m4_include([m4/realloc.m4])
-m4_include([m4/utimbuf.m4])
+++ /dev/null
-#! /bin/sh
-# Attempt to guess a canonical system name.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-# Inc.
-
-timestamp='2006-07-02'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub. If it succeeds, it prints the system name on stdout, and
-# exits with 0. Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help" >&2
- exit 1 ;;
- * )
- break ;;
- esac
-done
-
-if test $# != 0; then
- echo "$me: too many arguments$help" >&2
- exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
- for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
- CC_FOR_BUILD="$c"; break ;
- fi ;
- done ;
- if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found ;
- fi
- ;;
- ,,*) CC_FOR_BUILD=$CC ;;
- ,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
- PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-case "${UNAME_MACHINE}" in
- i?86)
- test -z "$VENDOR" && VENDOR=pc
- ;;
- *)
- test -z "$VENDOR" && VENDOR=unknown
- ;;
-esac
-test -f /etc/SuSE-release -o -f /.buildenv && VENDOR=suse
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
- *:NetBSD:*:*)
- # NetBSD (nbsd) targets should (where applicable) match one or
- # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
- # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
- # switched to ELF, *-*-netbsd* would select the old
- # object file format. This provides both forward
- # compatibility and a consistent mechanism for selecting the
- # object file format.
- #
- # Note: NetBSD doesn't particularly care about the vendor
- # portion of the name. We always set it to "unknown".
- sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
- armeb) machine=armeb-unknown ;;
- arm*) machine=arm-unknown ;;
- sh3el) machine=shl-unknown ;;
- sh3eb) machine=sh-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
- esac
- # The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
- if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
- | grep __ELF__ >/dev/null
- then
- # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
- # Return netbsd for either. FIX?
- os=netbsd
- else
- os=netbsdelf
- fi
- ;;
- *)
- os=netbsd
- ;;
- esac
- # The OS release
- # Debian GNU/NetBSD machines have a different userland, and
- # thus, need a distinct triplet. However, they do not need
- # kernel version information, so it can be replaced with a
- # suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
- Debian*)
- release='-gnu'
- ;;
- *)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
- ;;
- esac
- # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
- # contains redundant information, the shorter form:
- # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
- exit ;;
- *:OpenBSD:*:*)
- UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
- exit ;;
- *:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
- exit ;;
- *:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
- exit ;;
- macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- *:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
- exit ;;
- alpha:OSF1:*:*)
- case $UNAME_RELEASE in
- *4.0)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- ;;
- *5.*)
- UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
- ;;
- esac
- # According to Compaq, /usr/sbin/psrinfo has been available on
- # OSF/1 and Tru64 systems produced since 1995. I hope that
- # covers most systems running today. This code pipes the CPU
- # types through head -n 1, so we only detect the type of CPU 0.
- ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
- case "$ALPHA_CPU_TYPE" in
- "EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
- "EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
- "LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
- "EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
- "EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
- "EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
- "EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
- "EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
- "EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
- "EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
- "EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
- "EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
- "EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
- esac
- # A Pn.n version is a patched version.
- # A Vn.n version is a released version.
- # A Tn.n version is a released field test version.
- # A Xn.n version is an unreleased experimental baselevel.
- # 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- exit ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
- Amiga*:UNIX_System_V:4.0:*)
- echo m68k-unknown-sysv4
- exit ;;
- *:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
- exit ;;
- *:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
- exit ;;
- *:OS/390:*:*)
- echo i370-ibm-openedition
- exit ;;
- *:z/VM:*:*)
- echo s390-ibm-zvmoe
- exit ;;
- *:OS400:*:*)
- echo powerpc-ibm-os400
- exit ;;
- arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
- exit ;;
- arm:riscos:*:*|arm:RISCOS:*:*)
- echo arm-unknown-riscos
- exit ;;
- SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
- echo hppa1.1-hitachi-hiuxmpp
- exit ;;
- Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
- # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
- if test "`(/bin/universe) 2>/dev/null`" = att ; then
- echo pyramid-pyramid-sysv3
- else
- echo pyramid-pyramid-bsd
- fi
- exit ;;
- NILE*:*:*:dcosx)
- echo pyramid-pyramid-svr4
- exit ;;
- DRS?6000:unix:4.0:6*)
- echo sparc-icl-nx6
- exit ;;
- DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
- case `/usr/bin/uname -p` in
- sparc) echo sparc-icl-nx7; exit ;;
- esac ;;
- sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- i86pc:SunOS:5.*:*)
- echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:6*:*)
- # According to config.sub, this is the proper way to canonicalize
- # SunOS6. Hard to guess exactly what SunOS6 will be like, but
- # it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- sun4*:SunOS:*:*)
- case "`/usr/bin/arch -k`" in
- Series*|S4*)
- UNAME_RELEASE=`uname -v`
- ;;
- esac
- # Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
- exit ;;
- sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
- exit ;;
- sun*:*:4.2BSD:*)
- UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
- case "`/bin/arch`" in
- sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
- ;;
- sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
- ;;
- esac
- exit ;;
- aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
- exit ;;
- # The situation for MiNT is a little confusing. The machine name
- # can be virtually everything (everything which is not
- # "atarist" or "atariste" at least should have a processor
- # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
- # to the lowercase version "mint" (or "freemint"). Finally
- # the system name "TOS" denotes a system which is actually not
- # MiNT. But MiNT is downward compatible to TOS, so this should
- # be no problem.
- atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
- exit ;;
- milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
- exit ;;
- hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
- exit ;;
- *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
- exit ;;
- m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
- exit ;;
- powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
- exit ;;
- RISC*:Mach:*:*)
- echo mips-dec-mach_bsd4.3
- exit ;;
- RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
- exit ;;
- VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
- exit ;;
- 2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
- exit ;;
- mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
- int main (int argc, char *argv[]) {
-#else
- int main (argc, argv) int argc; char *argv[]; {
-#endif
- #if defined (host_mips) && defined (MIPSEB)
- #if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
- #endif
- #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
- #endif
- #endif
- exit (-1);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
- exit ;;
- Motorola:PowerMAX_OS:*:*)
- echo powerpc-motorola-powermax
- exit ;;
- Motorola:*:4.3:PL8-*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
- echo powerpc-harris-powermax
- exit ;;
- Night_Hawk:Power_UNIX:*:*)
- echo powerpc-harris-powerunix
- exit ;;
- m88k:CX/UX:7*:*)
- echo m88k-harris-cxux7
- exit ;;
- m88k:*:4*:R4*)
- echo m88k-motorola-sysv4
- exit ;;
- m88k:*:3*:R3*)
- echo m88k-motorola-sysv3
- exit ;;
- AViiON:dgux:*:*)
- # DG/UX returns AViiON for all architectures
- UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
- then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
- then
- echo m88k-dg-dgux${UNAME_RELEASE}
- else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
- fi
- else
- echo i586-dg-dgux${UNAME_RELEASE}
- fi
- exit ;;
- M88*:DolphinOS:*:*) # DolphinOS (SVR3)
- echo m88k-dolphin-sysv3
- exit ;;
- M88*:*:R3*:*)
- # Delta 88k system running SVR3
- echo m88k-motorola-sysv3
- exit ;;
- XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
- echo m88k-tektronix-sysv3
- exit ;;
- Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
- echo m68k-tektronix-bsd
- exit ;;
- *:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
- exit ;;
- ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
- echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
- exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
- i*86:AIX:*:*)
- echo i386-ibm-aix
- exit ;;
- ia64:AIX:*:*)
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:2:3)
- if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <sys/systemcfg.h>
-
- main()
- {
- if (!__power_pc())
- exit(1);
- puts("powerpc-ibm-aix3.2.5");
- exit(0);
- }
-EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
- then
- echo "$SYSTEM_NAME"
- else
- echo rs6000-ibm-aix3.2.5
- fi
- elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
- echo rs6000-ibm-aix3.2.4
- else
- echo rs6000-ibm-aix3.2
- fi
- exit ;;
- *:AIX:*:[45])
- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
- IBM_ARCH=rs6000
- else
- IBM_ARCH=powerpc
- fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
- else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
- fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
- exit ;;
- *:AIX:*:*)
- echo rs6000-ibm-aix
- exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
- echo romp-ibm-bsd4.4
- exit ;;
- ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
- exit ;; # report: romp-ibm BSD 4.3
- *:BOSX:*:*)
- echo rs6000-bull-bosx
- exit ;;
- DPX/2?00:B.O.S.:*:*)
- echo m68k-bull-sysv3
- exit ;;
- 9000/[34]??:4.3bsd:1.*:*)
- echo m68k-hp-bsd
- exit ;;
- hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
- echo m68k-hp-bsd4.4
- exit ;;
- 9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
- 9000/[678][0-9][0-9])
- if [ -x /usr/bin/getconf ]; then
- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
- sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
- 532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
- esac ;;
- esac
- fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
-
- #define _HPUX_SOURCE
- #include <stdlib.h>
- #include <unistd.h>
-
- int main ()
- {
- #if defined(_SC_KERNEL_BITS)
- long bits = sysconf(_SC_KERNEL_BITS);
- #endif
- long cpu = sysconf (_SC_CPU_VERSION);
-
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
- case CPU_PA_RISC2_0:
- #if defined(_SC_KERNEL_BITS)
- switch (bits)
- {
- case 64: puts ("hppa2.0w"); break;
- case 32: puts ("hppa2.0n"); break;
- default: puts ("hppa2.0"); break;
- } break;
- #else /* !defined(_SC_KERNEL_BITS) */
- puts ("hppa2.0"); break;
- #endif
- default: puts ("hppa1.0"); break;
- }
- exit (0);
- }
-EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
- test -z "$HP_ARCH" && HP_ARCH=hppa
- fi ;;
- esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
- then
- eval $set_cc_for_build
-
- # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
- # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
- # generating 64-bit code. GNU and HP use different nomenclature:
- #
- # $ CC_FOR_BUILD=cc ./config.guess
- # => hppa2.0w-hp-hpux11.23
- # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
- # => hppa64-hp-hpux11.23
-
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
- grep __LP64__ >/dev/null
- then
- HP_ARCH="hppa2.0w"
- else
- HP_ARCH="hppa64"
- fi
- fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
- exit ;;
- ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
- exit ;;
- 3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <unistd.h>
- int
- main ()
- {
- long cpu = sysconf (_SC_CPU_VERSION);
- /* The order matters, because CPU_IS_HP_MC68K erroneously returns
- true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
- results, however. */
- if (CPU_IS_PA_RISC (cpu))
- {
- switch (cpu)
- {
- case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
- case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
- default: puts ("hppa-hitachi-hiuxwe2"); break;
- }
- }
- else if (CPU_IS_HP_MC68K (cpu))
- puts ("m68k-hitachi-hiuxwe2");
- else puts ("unknown-hitachi-hiuxwe2");
- exit (0);
- }
-EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
- echo unknown-hitachi-hiuxwe2
- exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
- echo hppa1.1-hp-bsd
- exit ;;
- 9000/8??:4.3bsd:*:*)
- echo hppa1.0-hp-bsd
- exit ;;
- *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
- echo hppa1.0-hp-mpeix
- exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
- echo hppa1.1-hp-osf
- exit ;;
- hp8??:OSF1:*:*)
- echo hppa1.0-hp-osf
- exit ;;
- i*86:OSF1:*:*)
- if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
- else
- echo ${UNAME_MACHINE}-unknown-osf1
- fi
- exit ;;
- parisc*:Lites*:*:*)
- echo hppa1.1-hp-lites
- exit ;;
- C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
- echo c1-convex-bsd
- exit ;;
- C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
- echo c34-convex-bsd
- exit ;;
- C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
- echo c38-convex-bsd
- exit ;;
- C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
- echo c4-convex-bsd
- exit ;;
- CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
- | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
- -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- *:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
- exit ;;
- F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
- echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- 5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
- echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
- exit ;;
- i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
- exit ;;
- sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
- exit ;;
- *:FreeBSD:*:*)
- case ${UNAME_MACHINE} in
- pc98)
- echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- esac
- exit ;;
- i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
- exit ;;
- i*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
- exit ;;
- i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
- exit ;;
- x86:Interix*:[3456]*)
- echo i586-pc-interix${UNAME_RELEASE}
- exit ;;
- EM64T:Interix*:[3456]*)
- echo x86_64-unknown-interix${UNAME_RELEASE}
- exit ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
- i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
- exit ;;
- amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
- echo x86_64-unknown-cygwin
- exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
- prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
- exit ;;
- *:GNU:*:*)
- # the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
- exit ;;
- *:GNU/*:*:*)
- # other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
- exit ;;
- i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
- exit ;;
- arm*:Linux:*:*)
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu
- exit ;;
- avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-gnu
- exit ;;
- cris:Linux:*:*)
- echo cris-axis-linux-gnu
- exit ;;
- crisv32:Linux:*:*)
- echo crisv32-axis-linux-gnu
- exit ;;
- frv:Linux:*:*)
- echo frv-${VENDOR}-linux-gnu
- exit ;;
- ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu
- exit ;;
- m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu
- exit ;;
- m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu
- exit ;;
- mips:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips
- #undef mipsel
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mipsel
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-${VENDOR}-linux-gnu"; exit; }
- ;;
- mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #undef CPU
- #undef mips64
- #undef mips64el
- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
- CPU=mips64el
- #else
- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
- CPU=mips64
- #else
- CPU=
- #endif
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^CPU/{
- s: ::g
- p
- }'`"
- test x"${CPU}" != x && { echo "${CPU}-${VENDOR}-linux-gnu"; exit; }
- ;;
- or32:Linux:*:*)
- echo or32-${VENDOR}-linux-gnu
- exit ;;
- ppc:Linux:*:*)
- echo powerpc-${VENDOR}-linux-gnu
- exit ;;
- ppc64:Linux:*:*)
- echo powerpc64-${VENDOR}-linux-gnu
- exit ;;
- alpha:Linux:*:*)
- case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
- EV5) UNAME_MACHINE=alphaev5 ;;
- EV56) UNAME_MACHINE=alphaev56 ;;
- PCA56) UNAME_MACHINE=alphapca56 ;;
- PCA57) UNAME_MACHINE=alphapca56 ;;
- EV6) UNAME_MACHINE=alphaev6 ;;
- EV67) UNAME_MACHINE=alphaev67 ;;
- EV68*) UNAME_MACHINE=alphaev68 ;;
- esac
- objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu${LIBC}
- exit ;;
- parisc:Linux:*:* | hppa:Linux:*:*)
- # Look for CPU level
- case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-${VENDOR}-linux-gnu ;;
- PA8*) echo hppa2.0-${VENDOR}-linux-gnu ;;
- *) echo hppa-${VENDOR}-linux-gnu ;;
- esac
- exit ;;
- parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-${VENDOR}-linux-gnu
- exit ;;
- s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux
- exit ;;
- sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu
- exit ;;
- sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu
- exit ;;
- sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-${VENDOR}-linux-gnu
- exit ;;
- vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-gnu
- exit ;;
- x86_64:Linux:*:*)
- echo x86_64-${VENDOR}-linux-gnu
- exit ;;
- i*86:Linux:*:*)
- # The BFD linker knows what the default object file format is, so
- # first see if it will tell us. cd to the root directory to prevent
- # problems with other programs or directories called `ld' in the path.
- # Set LC_ALL=C to ensure ld outputs messages in English.
- ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
- | sed -ne '/supported targets:/!d
- s/[ ][ ]*/ /g
- s/.*supported targets: *//
- s/ .*//
- p'`
- case "$ld_supported_targets" in
- elf32-i386)
- TENTATIVE="${UNAME_MACHINE}-${VENDOR}-linux-gnu"
- ;;
- a.out-i386-linux)
- echo "${UNAME_MACHINE}-${VENDOR}-linux-gnuaout"
- exit ;;
- coff-i386)
- echo "${UNAME_MACHINE}-${VENDOR}-linux-gnucoff"
- exit ;;
- "")
- # Either a pre-BFD a.out linker (linux-gnuoldld) or
- # one that does not give us useful --help.
- echo "${UNAME_MACHINE}-${VENDOR}-linux-gnuoldld"
- exit ;;
- esac
- # Determine whether the default compiler is a.out or elf
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #ifdef __ELF__
- # ifdef __GLIBC__
- # if __GLIBC__ >= 2
- LIBC=gnu
- # else
- LIBC=gnulibc1
- # endif
- # else
- LIBC=gnulibc1
- # endif
- #else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
- LIBC=gnu
- #else
- LIBC=gnuaout
- #endif
- #endif
- #ifdef __dietlibc__
- LIBC=dietlibc
- #endif
-EOF
- eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
- /^LIBC/{
- s: ::g
- p
- }'`"
- test x"${LIBC}" != x && {
- echo "${UNAME_MACHINE}-${VENDOR}-linux-${LIBC}"
- exit
- }
- test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
- ;;
- i*86:DYNIX/ptx:4*:*)
- # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
- # earlier versions are messed up and put the nodename in both
- # sysname and nodename.
- echo i386-sequent-sysv4
- exit ;;
- i*86:UNIX_SV:4.2MP:2.*)
- # Unixware is an offshoot of SVR4, but it has its own version
- # number series starting with 2...
- # I am not positive that other SVR4 systems won't match this,
- # I just have to hope. -- rms.
- # Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
- exit ;;
- i*86:OS/2:*:*)
- # If we were able to find `uname', then EMX Unix compatibility
- # is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
- exit ;;
- i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
- exit ;;
- i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
- exit ;;
- i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
- exit ;;
- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
- exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
- if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
- fi
- exit ;;
- i*86:*:5:[678]*)
- # UnixWare 7.x, OpenUNIX and OpenServer 6.
- case `/bin/uname -X | grep "^Machine"` in
- *486*) UNAME_MACHINE=i486 ;;
- *Pentium) UNAME_MACHINE=i586 ;;
- *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
- esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
- exit ;;
- i*86:*:3.2:*)
- if test -f /usr/options/cb.name; then
- UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
- elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
- (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
- && UNAME_MACHINE=i586
- (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
- && UNAME_MACHINE=i686
- (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
- && UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
- else
- echo ${UNAME_MACHINE}-pc-sysv32
- fi
- exit ;;
- pc:*:*:*)
- # Left here for compatibility:
- # uname -m prints for DJGPP always 'pc', but it prints nothing about
- # the processor, so we play safe by assuming i386.
- echo i386-pc-msdosdjgpp
- exit ;;
- Intel:Mach:3*:*)
- echo i386-pc-mach3
- exit ;;
- paragon:*:*:*)
- echo i860-intel-osf1
- exit ;;
- i860:*:4.*:*) # i860-SVR4
- if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
- else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
- fi
- exit ;;
- mini*:CTIX:SYS*5:*)
- # "miniframe"
- echo m68010-convergent-sysv
- exit ;;
- mc68k:UNIX:SYSTEM5:3.51m)
- echo m68k-convergent-sysv
- exit ;;
- M680?0:D-NIX:5.3:*)
- echo m68k-diab-dnix
- exit ;;
- M68*:*:R3V[5678]*:*)
- test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
- 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
- OS_REL=''
- test -r /etc/.relid \
- && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
- /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
- 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
- /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4; exit; } ;;
- m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- mc68030:UNIX_System_V:4.*:*)
- echo m68k-atari-sysv4
- exit ;;
- TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
- exit ;;
- SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
- exit ;;
- RM*:ReliantUNIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- RM*:SINIX-*:*:*)
- echo mips-sni-sysv4
- exit ;;
- *:SINIX-*:*:*)
- if uname -p 2>/dev/null >/dev/null ; then
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
- else
- echo ns32k-sni-sysv
- fi
- exit ;;
- PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
- echo i586-unisys-sysv4
- exit ;;
- *:UNIX_System_V:4*:FTX*)
- # From Gerald Hewes <hewes@openmarket.com>.
- # How about differentiating between stratus architectures? -djm
- echo hppa1.1-stratus-sysv4
- exit ;;
- *:*:*:FTX*)
- # From seanf@swdc.stratus.com.
- echo i860-stratus-sysv4
- exit ;;
- i*86:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
- exit ;;
- *:VOS:*:*)
- # From Paul.Green@stratus.com.
- echo hppa1.1-stratus-vos
- exit ;;
- mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
- exit ;;
- news*:NEWS-OS:6*:*)
- echo mips-sony-newsos6
- exit ;;
- R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
- if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
- else
- echo mips-unknown-sysv${UNAME_RELEASE}
- fi
- exit ;;
- BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
- echo powerpc-be-beos
- exit ;;
- BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
- echo powerpc-apple-beos
- exit ;;
- BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
- echo i586-pc-beos
- exit ;;
- SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
- exit ;;
- SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
- exit ;;
- Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
- exit ;;
- *:Darwin:*:*)
- UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- case $UNAME_PROCESSOR in
- unknown) UNAME_PROCESSOR=powerpc ;;
- esac
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
- exit ;;
- *:procnto*:*:* | *:QNX:[0123456789]*:*)
- UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
- UNAME_PROCESSOR=i386
- UNAME_MACHINE=pc
- fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
- exit ;;
- *:QNX:*:4*)
- echo i386-pc-qnx
- exit ;;
- NSE-?:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
- exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
- exit ;;
- *:NonStop-UX:*:*)
- echo mips-compaq-nonstopux
- exit ;;
- BS2000:POSIX*:*:*)
- echo bs2000-siemens-sysv
- exit ;;
- DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
- exit ;;
- *:Plan9:*:*)
- # "uname -m" is not consistent, so use $cputype instead. 386
- # is converted to i386 for consistency with other x86
- # operating systems.
- if test "$cputype" = "386"; then
- UNAME_MACHINE=i386
- else
- UNAME_MACHINE="$cputype"
- fi
- echo ${UNAME_MACHINE}-unknown-plan9
- exit ;;
- *:TOPS-10:*:*)
- echo pdp10-unknown-tops10
- exit ;;
- *:TENEX:*:*)
- echo pdp10-unknown-tenex
- exit ;;
- KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
- echo pdp10-dec-tops20
- exit ;;
- XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
- echo pdp10-xkl-tops20
- exit ;;
- *:TOPS-20:*:*)
- echo pdp10-unknown-tops20
- exit ;;
- *:ITS:*:*)
- echo pdp10-unknown-its
- exit ;;
- SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
- exit ;;
- *:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
- exit ;;
- *:*VMS:*:*)
- UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
- A*) echo alpha-dec-vms ; exit ;;
- I*) echo ia64-dec-vms ; exit ;;
- V*) echo vax-dec-vms ; exit ;;
- esac ;;
- *:XENIX:*:SysV)
- echo i386-pc-xenix
- exit ;;
- i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
- exit ;;
- i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
- exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
-and
- http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo = `(hostinfo) 2>/dev/null`
-/bin/universe = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-/* config.h.in. Generated from configure.ac by autoheader. */
-
-/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP
- systems. This function is required for `alloca.c' support on those systems.
- */
-#undef CRAY_STACKSEG_END
-
-/* Define to 1 if using `alloca.c'. */
-#undef C_ALLOCA
-
-/* Define to 1 if translation of program messages to the user's native
- language is requested. */
-#undef ENABLE_NLS
-
-/* Define to 1 if you have `alloca', as a function or macro. */
-#undef HAVE_ALLOCA
-
-/* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix).
- */
-#undef HAVE_ALLOCA_H
-
-/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
- CoreFoundation framework. */
-#undef HAVE_CFLOCALECOPYCURRENT
-
-/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
- the CoreFoundation framework. */
-#undef HAVE_CFPREFERENCESCOPYAPPVALUE
-
-/* Define if the GNU dcgettext() function is already present or preinstalled.
- */
-#undef HAVE_DCGETTEXT
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#undef HAVE_DLFCN_H
-
-/* Define if the malloc check has been performed. */
-#undef HAVE_DONE_WORKING_MALLOC_CHECK
-
-/* Define if the realloc check has been performed. */
-#undef HAVE_DONE_WORKING_REALLOC_CHECK
-
-/* Define to 1 if you don't have `vprintf' but do have `_doprnt.' */
-#undef HAVE_DOPRNT
-
-/* Define to 1 if you have the `dup2' function. */
-#undef HAVE_DUP2
-
-/* Define if the GNU gettext() function is already present or preinstalled. */
-#undef HAVE_GETTEXT
-
-/* Define if you have the iconv() function and it works. */
-#undef HAVE_ICONV
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define if you have <langinfo.h> and nl_langinfo(CODESET). */
-#undef HAVE_LANGINFO_CODESET
-
-/* Define to 1 if you have the <langinfo.h> header file. */
-#undef HAVE_LANGINFO_H
-
-/* Define to 1 if you have the <limits.h> header file. */
-#undef HAVE_LIMITS_H
-
-/* Define to 1 if you have the <locale.h> header file. */
-#undef HAVE_LOCALE_H
-
-/* Define to 1 if you have the `mbrtowc' function. */
-#undef HAVE_MBRTOWC
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the `nl_langinfo' function. */
-#undef HAVE_NL_LANGINFO
-
-/* Define to 1 if you have the `rename' function. */
-#undef HAVE_RENAME
-
-/* Define to 1 if you have the `setlocale' function. */
-#undef HAVE_SETLOCALE
-
-/* Define to 1 if you have the <stdbool.h> header file. */
-#undef HAVE_STDBOOL_H
-
-/* Define to 1 if you have the <stddef.h> header file. */
-#undef HAVE_STDDEF_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the `strerror' function. */
-#undef HAVE_STRERROR
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the `strndup' function. */
-#undef HAVE_STRNDUP
-
-/* Define to 1 if you have the `strtol' function. */
-#undef HAVE_STRTOL
-
-/* Define to 1 if you have the `strtoul' function. */
-#undef HAVE_STRTOUL
-
-/* Define if struct utimbuf is declared -- usually in <utime.h>. Some systems
- have utime.h but don't declare the struct anywhere. */
-#undef HAVE_STRUCT_UTIMBUF
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Define to 1 if you have the <utime.h> header file. */
-#undef HAVE_UTIME_H
-
-/* Define to 1 if you have the `vprintf' function. */
-#undef HAVE_VPRINTF
-
-/* Define to 1 if you have the `wcrtomb' function. */
-#undef HAVE_WCRTOMB
-
-/* Define as const if the declaration of iconv() needs const. */
-#undef ICONV_CONST
-
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
-#undef LT_OBJDIR
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define as the return type of signal handlers (`int' or `void'). */
-#undef RETSIGTYPE
-
-/* If using the C implementation of alloca, define if you know the
- direction of stack growth for your system; otherwise it will be
- automatically deduced at runtime.
- STACK_DIRECTION > 0 => grows toward higher addresses
- STACK_DIRECTION < 0 => grows toward lower addresses
- STACK_DIRECTION = 0 => direction of growth unknown */
-#undef STACK_DIRECTION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
-#undef TIME_WITH_SYS_TIME
-
-/* Version number of package */
-#undef VERSION
-
-/* Define if using the dmalloc debugging malloc package */
-#undef WITH_DMALLOC
-
-/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
- `char[]'. */
-#undef YYTEXT_POINTER
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
- calls it, or to nothing if 'inline' is not supported under any name. */
-#ifndef __cplusplus
-#undef inline
-#endif
-
-/* Define to rpl_malloc if the replacement function should be used. */
-#undef malloc
-
-/* Define to rpl_realloc if the replacement function should be used. */
-#undef realloc
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t
-
-
-#include "cleaner.h"
-
+++ /dev/null
-#! /bin/sh
-# Configuration validation subroutine script.
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-# Inc.
-
-timestamp='2006-09-20'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine. It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>. Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support. The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
- -h, --help print this help, then exit
- -t, --time-stamp print date of last modification, then exit
- -v, --version print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
- case $1 in
- --time-stamp | --time* | -t )
- echo "$timestamp" ; exit ;;
- --version | -v )
- echo "$version" ; exit ;;
- --help | --h* | -h )
- echo "$usage"; exit ;;
- -- ) # Stop option processing
- shift; break ;;
- - ) # Use stdin as input.
- break ;;
- -* )
- echo "$me: invalid option $1$help"
- exit 1 ;;
-
- *local*)
- # First pass through any local machine types.
- echo $1
- exit ;;
-
- * )
- break ;;
- esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
- exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
- exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
- nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
- uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
- storm-chaos* | os2-emx* | rtmk-nova*)
- os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
- ;;
- *)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
- else os=; fi
- ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work. We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
- -sun*os*)
- # Prevent following clause from handling this invalid input.
- ;;
- -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
- -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
- -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
- -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
- -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
- -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis | -knuth | -cray)
- os=
- basic_machine=$1
- ;;
- -sim | -cisco | -oki | -wec | -winbond)
- os=
- basic_machine=$1
- ;;
- -scout)
- ;;
- -wrs)
- os=-vxworks
- basic_machine=$1
- ;;
- -chorusos*)
- os=-chorusos
- basic_machine=$1
- ;;
- -chorusrdb)
- os=-chorusrdb
- basic_machine=$1
- ;;
- -hiux*)
- os=-hiuxwe2
- ;;
- -sco6)
- os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5)
- os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco4)
- os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2.[4-9]*)
- os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco3.2v[4-9]*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco5v6*)
- # Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -sco*)
- os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -isc)
- os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -clix*)
- basic_machine=clipper-intergraph
- ;;
- -isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
- ;;
- -lynx*)
- os=-lynxos
- ;;
- -ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
- ;;
- -psos*)
- os=-psos
- ;;
- -mint | -mint[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
- # Recognize the basic CPU types without company name.
- # Some are omitted here because they have special meanings below.
- 1750a | 580 \
- | a29k \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
- | am33_2.0 \
- | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
- | bfin \
- | c4x | clipper \
- | d10v | d30v | dlx | dsp16xx \
- | fr30 | frv \
- | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
- | i370 | i860 | i960 | ia64 \
- | ip2k | iq2000 \
- | m32c | m32r | m32rle | m68000 | m68k | m88k \
- | maxq | mb | microblaze | mcore \
- | mips | mipsbe | mipseb | mipsel | mipsle \
- | mips16 \
- | mips64 | mips64el \
- | mips64vr | mips64vrel \
- | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el \
- | mips64vr4300 | mips64vr4300el \
- | mips64vr5000 | mips64vr5000el \
- | mips64vr5900 | mips64vr5900el \
- | mipsisa32 | mipsisa32el \
- | mipsisa32r2 | mipsisa32r2el \
- | mipsisa64 | mipsisa64el \
- | mipsisa64r2 | mipsisa64r2el \
- | mipsisa64sb1 | mipsisa64sb1el \
- | mipsisa64sr71k | mipsisa64sr71kel \
- | mipstx39 | mipstx39el \
- | mn10200 | mn10300 \
- | mt \
- | msp430 \
- | nios | nios2 \
- | ns16k | ns32k \
- | or32 \
- | pdp10 | pdp11 | pj | pjl \
- | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
- | pyramid \
- | score \
- | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
- | sh64 | sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | spu | strongarm \
- | tahoe | thumb | tic4x | tic80 | tron \
- | v850 | v850e \
- | we32k \
- | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
- | z8k)
- basic_machine=$basic_machine-unknown
- ;;
- m6811 | m68hc11 | m6812 | m68hc12)
- # Motorola 68HC11/12.
- basic_machine=$basic_machine-unknown
- os=-none
- ;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
- ;;
- ms1)
- basic_machine=mt-unknown
- ;;
-
- # We use `pc' rather than `unknown'
- # because (1) that's what they normally are, and
- # (2) the word "unknown" tends to confuse beginning users.
- i*86 | x86_64)
- basic_machine=$basic_machine-pc
- ;;
- # Object if more than one company name word.
- *-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
- # Recognize the basic CPU types with company name.
- 580-* \
- | a29k-* \
- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
- | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
- | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
- | avr-* | avr32-* \
- | bfin-* | bs2000-* \
- | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | craynv-* | cydra-* \
- | d10v-* | d30v-* | dlx-* \
- | elxsi-* \
- | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
- | h8300-* | h8500-* \
- | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
- | i*86-* | i860-* | i960-* | ia64-* \
- | ip2k-* | iq2000-* \
- | m32c-* | m32r-* | m32rle-* \
- | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | maxq-* | mcore-* \
- | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
- | mips16-* \
- | mips64-* | mips64el-* \
- | mips64vr-* | mips64vrel-* \
- | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* \
- | mips64vr5000-* | mips64vr5000el-* \
- | mips64vr5900-* | mips64vr5900el-* \
- | mipsisa32-* | mipsisa32el-* \
- | mipsisa32r2-* | mipsisa32r2el-* \
- | mipsisa64-* | mipsisa64el-* \
- | mipsisa64r2-* | mipsisa64r2el-* \
- | mipsisa64sb1-* | mipsisa64sb1el-* \
- | mipsisa64sr71k-* | mipsisa64sr71kel-* \
- | mipstx39-* | mipstx39el-* \
- | mmix-* \
- | mt-* \
- | msp430-* \
- | nios-* | nios2-* \
- | none-* | np1-* | ns16k-* | ns32k-* \
- | orion-* \
- | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
- | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
- | pyramid-* \
- | romp-* | rs6000-* \
- | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
- | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
- | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
- | sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
- | tahoe-* | thumb-* \
- | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
- | tron-* \
- | v850-* | v850e-* | vax-* \
- | we32k-* \
- | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
- | xstormy16-* | xtensa-* \
- | ymp-* \
- | z8k-*)
- ;;
- # Recognize the various machine names and aliases which stand
- # for a CPU type and a company and sometimes even an OS.
- 386bsd)
- basic_machine=i386-unknown
- os=-bsd
- ;;
- 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
- basic_machine=m68000-att
- ;;
- 3b*)
- basic_machine=we32k-att
- ;;
- a29khif)
- basic_machine=a29k-amd
- os=-udi
- ;;
- abacus)
- basic_machine=abacus-unknown
- ;;
- adobe68k)
- basic_machine=m68010-adobe
- os=-scout
- ;;
- alliant | fx80)
- basic_machine=fx80-alliant
- ;;
- altos | altos3068)
- basic_machine=m68k-altos
- ;;
- am29k)
- basic_machine=a29k-none
- os=-bsd
- ;;
- amd64)
- basic_machine=x86_64-pc
- ;;
- amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- amdahl)
- basic_machine=580-amdahl
- os=-sysv
- ;;
- amiga | amiga-*)
- basic_machine=m68k-unknown
- ;;
- amigaos | amigados)
- basic_machine=m68k-unknown
- os=-amigaos
- ;;
- amigaunix | amix)
- basic_machine=m68k-unknown
- os=-sysv4
- ;;
- apollo68)
- basic_machine=m68k-apollo
- os=-sysv
- ;;
- apollo68bsd)
- basic_machine=m68k-apollo
- os=-bsd
- ;;
- aux)
- basic_machine=m68k-apple
- os=-aux
- ;;
- balance)
- basic_machine=ns32k-sequent
- os=-dynix
- ;;
- c90)
- basic_machine=c90-cray
- os=-unicos
- ;;
- convex-c1)
- basic_machine=c1-convex
- os=-bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- os=-bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- os=-bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- os=-bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- os=-bsd
- ;;
- cray | j90)
- basic_machine=j90-cray
- os=-unicos
- ;;
- craynv)
- basic_machine=craynv-cray
- os=-unicosmp
- ;;
- cr16c)
- basic_machine=cr16c-unknown
- os=-elf
- ;;
- crds | unos)
- basic_machine=m68k-crds
- ;;
- crisv32 | crisv32-* | etraxfs*)
- basic_machine=crisv32-axis
- ;;
- cris | cris-* | etrax*)
- basic_machine=cris-axis
- ;;
- crx)
- basic_machine=crx-unknown
- os=-elf
- ;;
- da30 | da30-*)
- basic_machine=m68k-da30
- ;;
- decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
- basic_machine=mips-dec
- ;;
- decsystem10* | dec10*)
- basic_machine=pdp10-dec
- os=-tops10
- ;;
- decsystem20* | dec20*)
- basic_machine=pdp10-dec
- os=-tops20
- ;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
- basic_machine=m68k-motorola
- ;;
- delta88)
- basic_machine=m88k-motorola
- os=-sysv3
- ;;
- djgpp)
- basic_machine=i586-pc
- os=-msdosdjgpp
- ;;
- dpx20 | dpx20-*)
- basic_machine=rs6000-bull
- os=-bosx
- ;;
- dpx2* | dpx2*-bull)
- basic_machine=m68k-bull
- os=-sysv3
- ;;
- ebmon29k)
- basic_machine=a29k-amd
- os=-ebmon
- ;;
- elxsi)
- basic_machine=elxsi-elxsi
- os=-bsd
- ;;
- encore | umax | mmax)
- basic_machine=ns32k-encore
- ;;
- es1800 | OSE68k | ose68k | ose | OSE)
- basic_machine=m68k-ericsson
- os=-ose
- ;;
- fx2800)
- basic_machine=i860-alliant
- ;;
- genix)
- basic_machine=ns32k-ns
- ;;
- gmicro)
- basic_machine=tron-gmicro
- os=-sysv
- ;;
- go32)
- basic_machine=i386-pc
- os=-go32
- ;;
- h3050r* | hiux*)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- h8300hms)
- basic_machine=h8300-hitachi
- os=-hms
- ;;
- h8300xray)
- basic_machine=h8300-hitachi
- os=-xray
- ;;
- h8500hms)
- basic_machine=h8500-hitachi
- os=-hms
- ;;
- harris)
- basic_machine=m88k-harris
- os=-sysv3
- ;;
- hp300-*)
- basic_machine=m68k-hp
- ;;
- hp300bsd)
- basic_machine=m68k-hp
- os=-bsd
- ;;
- hp300hpux)
- basic_machine=m68k-hp
- os=-hpux
- ;;
- hp3k9[0-9][0-9] | hp9[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k2[0-9][0-9] | hp9k31[0-9])
- basic_machine=m68000-hp
- ;;
- hp9k3[2-9][0-9])
- basic_machine=m68k-hp
- ;;
- hp9k6[0-9][0-9] | hp6[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hp9k7[0-79][0-9] | hp7[0-79][0-9])
- basic_machine=hppa1.1-hp
- ;;
- hp9k78[0-9] | hp78[0-9])
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
- # FIXME: really hppa2.0-hp
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][13679] | hp8[0-9][13679])
- basic_machine=hppa1.1-hp
- ;;
- hp9k8[0-9][0-9] | hp8[0-9][0-9])
- basic_machine=hppa1.0-hp
- ;;
- hppa-next)
- os=-nextstep3
- ;;
- hppaosf)
- basic_machine=hppa1.1-hp
- os=-osf
- ;;
- hppro)
- basic_machine=hppa1.1-hp
- os=-proelf
- ;;
- i370-ibm* | ibm*)
- basic_machine=i370-ibm
- ;;
-# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv32
- ;;
- i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv4
- ;;
- i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-sysv
- ;;
- i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
- os=-solaris2
- ;;
- i386mach)
- basic_machine=i386-mach
- os=-mach
- ;;
- i386-vsta | vsta)
- basic_machine=i386-unknown
- os=-vsta
- ;;
- iris | iris4d)
- basic_machine=mips-sgi
- case $os in
- -irix*)
- ;;
- *)
- os=-irix4
- ;;
- esac
- ;;
- isi68 | isi)
- basic_machine=m68k-isi
- os=-sysv
- ;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
- magnum | m3230)
- basic_machine=mips-mips
- os=-sysv
- ;;
- merlin)
- basic_machine=ns32k-utek
- os=-sysv
- ;;
- mingw32)
- basic_machine=i386-pc
- os=-mingw32
- ;;
- miniframe)
- basic_machine=m68000-convergent
- ;;
- *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
- basic_machine=m68k-atari
- os=-mint
- ;;
- mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
- ;;
- mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
- ;;
- monitor)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- morphos)
- basic_machine=powerpc-unknown
- os=-morphos
- ;;
- msdos)
- basic_machine=i386-pc
- os=-msdos
- ;;
- ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
- ;;
- mvs)
- basic_machine=i370-ibm
- os=-mvs
- ;;
- ncr3000)
- basic_machine=i486-ncr
- os=-sysv4
- ;;
- netbsd386)
- basic_machine=i386-unknown
- os=-netbsd
- ;;
- netwinder)
- basic_machine=armv4l-rebel
- os=-linux
- ;;
- news | news700 | news800 | news900)
- basic_machine=m68k-sony
- os=-newsos
- ;;
- news1000)
- basic_machine=m68030-sony
- os=-newsos
- ;;
- news-3600 | risc-news)
- basic_machine=mips-sony
- os=-newsos
- ;;
- necv70)
- basic_machine=v70-nec
- os=-sysv
- ;;
- next | m*-next )
- basic_machine=m68k-next
- case $os in
- -nextstep* )
- ;;
- -ns2*)
- os=-nextstep2
- ;;
- *)
- os=-nextstep3
- ;;
- esac
- ;;
- nh3000)
- basic_machine=m68k-harris
- os=-cxux
- ;;
- nh[45]000)
- basic_machine=m88k-harris
- os=-cxux
- ;;
- nindy960)
- basic_machine=i960-intel
- os=-nindy
- ;;
- mon960)
- basic_machine=i960-intel
- os=-mon960
- ;;
- nonstopux)
- basic_machine=mips-compaq
- os=-nonstopux
- ;;
- np1)
- basic_machine=np1-gould
- ;;
- nsr-tandem)
- basic_machine=nsr-tandem
- ;;
- op50n-* | op60c-*)
- basic_machine=hppa1.1-oki
- os=-proelf
- ;;
- openrisc | openrisc-*)
- basic_machine=or32-unknown
- ;;
- os400)
- basic_machine=powerpc-ibm
- os=-os400
- ;;
- OSE68000 | ose68000)
- basic_machine=m68000-ericsson
- os=-ose
- ;;
- os68k)
- basic_machine=m68k-none
- os=-os68k
- ;;
- pa-hitachi)
- basic_machine=hppa1.1-hitachi
- os=-hiuxwe2
- ;;
- paragon)
- basic_machine=i860-intel
- os=-osf
- ;;
- pbd)
- basic_machine=sparc-tti
- ;;
- pbb)
- basic_machine=m68k-tti
- ;;
- pc532 | pc532-*)
- basic_machine=ns32k-pc532
- ;;
- pc98)
- basic_machine=i386-pc
- ;;
- pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium | p5 | k5 | k6 | nexgen | viac3)
- basic_machine=i586-pc
- ;;
- pentiumpro | p6 | 6x86 | athlon | athlon_*)
- basic_machine=i686-pc
- ;;
- pentiumii | pentium2 | pentiumiii | pentium3)
- basic_machine=i686-pc
- ;;
- pentium4)
- basic_machine=i786-pc
- ;;
- pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- pn)
- basic_machine=pn-gould
- ;;
- power) basic_machine=power-ibm
- ;;
- ppc) basic_machine=powerpc-unknown
- ;;
- ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
- basic_machine=powerpcle-unknown
- ;;
- ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64) basic_machine=powerpc64-unknown
- ;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
- basic_machine=powerpc64le-unknown
- ;;
- ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
- ;;
- ps2)
- basic_machine=i386-ibm
- ;;
- pw32)
- basic_machine=i586-unknown
- os=-pw32
- ;;
- rdos)
- basic_machine=i386-pc
- os=-rdos
- ;;
- rom68k)
- basic_machine=m68k-rom68k
- os=-coff
- ;;
- rm[46]00)
- basic_machine=mips-siemens
- ;;
- rtpc | rtpc-*)
- basic_machine=romp-ibm
- ;;
- s390 | s390-*)
- basic_machine=s390-ibm
- ;;
- s390x | s390x-*)
- basic_machine=s390x-ibm
- ;;
- sa29200)
- basic_machine=a29k-amd
- os=-udi
- ;;
- sb1)
- basic_machine=mipsisa64sb1-unknown
- ;;
- sb1el)
- basic_machine=mipsisa64sb1el-unknown
- ;;
- sde)
- basic_machine=mipsisa32-sde
- os=-elf
- ;;
- sei)
- basic_machine=mips-sei
- os=-seiux
- ;;
- sequent)
- basic_machine=i386-sequent
- ;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
- basic_machine=sparclite-wrs
- os=-vxworks
- ;;
- sps7)
- basic_machine=m68k-bull
- os=-sysv2
- ;;
- spur)
- basic_machine=spur-unknown
- ;;
- st2000)
- basic_machine=m68k-tandem
- ;;
- stratus)
- basic_machine=i860-stratus
- os=-sysv4
- ;;
- sun2)
- basic_machine=m68000-sun
- ;;
- sun2os3)
- basic_machine=m68000-sun
- os=-sunos3
- ;;
- sun2os4)
- basic_machine=m68000-sun
- os=-sunos4
- ;;
- sun3os3)
- basic_machine=m68k-sun
- os=-sunos3
- ;;
- sun3os4)
- basic_machine=m68k-sun
- os=-sunos4
- ;;
- sun4os3)
- basic_machine=sparc-sun
- os=-sunos3
- ;;
- sun4os4)
- basic_machine=sparc-sun
- os=-sunos4
- ;;
- sun4sol2)
- basic_machine=sparc-sun
- os=-solaris2
- ;;
- sun3 | sun3-*)
- basic_machine=m68k-sun
- ;;
- sun4)
- basic_machine=sparc-sun
- ;;
- sun386 | sun386i | roadrunner)
- basic_machine=i386-sun
- ;;
- sv1)
- basic_machine=sv1-cray
- os=-unicos
- ;;
- symmetry)
- basic_machine=i386-sequent
- os=-dynix
- ;;
- t3e)
- basic_machine=alphaev5-cray
- os=-unicos
- ;;
- t90)
- basic_machine=t90-cray
- os=-unicos
- ;;
- tic54x | c54x*)
- basic_machine=tic54x-unknown
- os=-coff
- ;;
- tic55x | c55x*)
- basic_machine=tic55x-unknown
- os=-coff
- ;;
- tic6x | c6x*)
- basic_machine=tic6x-unknown
- os=-coff
- ;;
- tx39)
- basic_machine=mipstx39-unknown
- ;;
- tx39el)
- basic_machine=mipstx39el-unknown
- ;;
- toad1)
- basic_machine=pdp10-xkl
- os=-tops20
- ;;
- tower | tower-32)
- basic_machine=m68k-ncr
- ;;
- tpf)
- basic_machine=s390x-ibm
- os=-tpf
- ;;
- udi29k)
- basic_machine=a29k-amd
- os=-udi
- ;;
- ultra3)
- basic_machine=a29k-nyu
- os=-sym1
- ;;
- v810 | necv810)
- basic_machine=v810-nec
- os=-none
- ;;
- vaxv)
- basic_machine=vax-dec
- os=-sysv
- ;;
- vms)
- basic_machine=vax-dec
- os=-vms
- ;;
- vpp*|vx|vx-*)
- basic_machine=f301-fujitsu
- ;;
- vxworks960)
- basic_machine=i960-wrs
- os=-vxworks
- ;;
- vxworks68)
- basic_machine=m68k-wrs
- os=-vxworks
- ;;
- vxworks29k)
- basic_machine=a29k-wrs
- os=-vxworks
- ;;
- w65*)
- basic_machine=w65-wdc
- os=-none
- ;;
- w89k-*)
- basic_machine=hppa1.1-winbond
- os=-proelf
- ;;
- xbox)
- basic_machine=i686-pc
- os=-mingw32
- ;;
- xps | xps100)
- basic_machine=xps100-honeywell
- ;;
- ymp)
- basic_machine=ymp-cray
- os=-unicos
- ;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- none)
- basic_machine=none-none
- os=-none
- ;;
-
-# Here we handle the default manufacturer of certain CPU types. It is in
-# some cases the only manufacturer, in others, it is the most popular.
- w89k)
- basic_machine=hppa1.1-winbond
- ;;
- op50n)
- basic_machine=hppa1.1-oki
- ;;
- op60c)
- basic_machine=hppa1.1-oki
- ;;
- romp)
- basic_machine=romp-ibm
- ;;
- mmix)
- basic_machine=mmix-knuth
- ;;
- rs6000)
- basic_machine=rs6000-ibm
- ;;
- vax)
- basic_machine=vax-dec
- ;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
- pdp11)
- basic_machine=pdp11-dec
- ;;
- we32k)
- basic_machine=we32k-att
- ;;
- sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
- basic_machine=sh-unknown
- ;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
- cydra)
- basic_machine=cydra-cydrome
- ;;
- orion)
- basic_machine=orion-highlevel
- ;;
- orion105)
- basic_machine=clipper-highlevel
- ;;
- mac | mpw | mac-mpw)
- basic_machine=m68k-apple
- ;;
- pmac | pmac-mpw)
- basic_machine=powerpc-apple
- ;;
- *-unknown)
- # Make sure to match an already-canonicalized machine name.
- ;;
- *)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
- exit 1
- ;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
- *-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
- ;;
- *-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
- ;;
- *)
- ;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
- # -solaris* is a basic system type, with this one exception.
- -solaris1 | -solaris1.*)
- os=`echo $os | sed -e 's|solaris1|sunos4|'`
- ;;
- -solaris)
- os=-solaris2
- ;;
- -svr4*)
- os=-sysv4
- ;;
- -unixware*)
- os=-sysv4.2uw
- ;;
- -gnu/linux*)
- os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
- ;;
- # First accept the basic system types.
- # The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
- # -sysv* is not here because it comes later, after sysvr4.
- -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
- | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
- | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
- | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* \
- | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
- | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -openbsd* | -solidbsd* \
- | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
- | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
- | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* \
- | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
- | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers*)
- # Remember, each alternative MUST END IN *, to match a version number.
- ;;
- -qnx*)
- case $basic_machine in
- x86-* | i*86-*)
- ;;
- *)
- os=-nto$os
- ;;
- esac
- ;;
- -nto-qnx*)
- ;;
- -nto*)
- os=`echo $os | sed -e 's|nto|nto-qnx|'`
- ;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
- | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
- ;;
- -mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
- ;;
- -linux-dietlibc)
- os=-linux-dietlibc
- ;;
- -linux*)
- os=`echo $os | sed -e 's|linux|linux-gnu|'`
- ;;
- -sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
- ;;
- -sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
- ;;
- -opened*)
- os=-openedition
- ;;
- -os400*)
- os=-os400
- ;;
- -wince*)
- os=-wince
- ;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
- -utek*)
- os=-bsd
- ;;
- -dynix*)
- os=-bsd
- ;;
- -acis*)
- os=-aos
- ;;
- -atheos*)
- os=-atheos
- ;;
- -syllable*)
- os=-syllable
- ;;
- -386bsd)
- os=-bsd
- ;;
- -ctix* | -uts*)
- os=-sysv
- ;;
- -nova*)
- os=-rtmk-nova
- ;;
- -ns2 )
- os=-nextstep2
- ;;
- -nsk*)
- os=-nsk
- ;;
- # Preserve the version number of sinix5.
- -sinix5.*)
- os=`echo $os | sed -e 's|sinix|sysv|'`
- ;;
- -sinix*)
- os=-sysv4
- ;;
- -tpf*)
- os=-tpf
- ;;
- -triton*)
- os=-sysv3
- ;;
- -oss*)
- os=-sysv3
- ;;
- -svr4)
- os=-sysv4
- ;;
- -svr3)
- os=-sysv3
- ;;
- -sysvr4)
- os=-sysv4
- ;;
- # This must come after -sysvr4.
- -sysv*)
- ;;
- -ose*)
- os=-ose
- ;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- os=-mint
- ;;
- -aros*)
- os=-aros
- ;;
- -kaos*)
- os=-kaos
- ;;
- -zvmoe)
- os=-zvmoe
- ;;
- -none)
- ;;
- *)
- # Get rid of the `-' at the beginning of $os.
- os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
- exit 1
- ;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system. Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
- score-*)
- os=-elf
- ;;
- spu-*)
- os=-elf
- ;;
- *-acorn)
- os=-riscix1.2
- ;;
- arm*-rebel)
- os=-linux
- ;;
- arm*-semi)
- os=-aout
- ;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
- # This must come before the *-dec entry.
- pdp10-*)
- os=-tops20
- ;;
- pdp11-*)
- os=-none
- ;;
- *-dec | vax-*)
- os=-ultrix4.2
- ;;
- m68*-apollo)
- os=-domain
- ;;
- i386-sun)
- os=-sunos4.0.2
- ;;
- m68000-sun)
- os=-sunos3
- # This also exists in the configure program, but was not the
- # default.
- # os=-sunos4
- ;;
- m68*-cisco)
- os=-aout
- ;;
- mips*-cisco)
- os=-elf
- ;;
- mips*-*)
- os=-elf
- ;;
- or32-*)
- os=-coff
- ;;
- *-tti) # must be before sparc entry or we get the wrong os.
- os=-sysv3
- ;;
- sparc-* | *-sun)
- os=-sunos4.1.1
- ;;
- *-be)
- os=-beos
- ;;
- *-haiku)
- os=-haiku
- ;;
- *-ibm)
- os=-aix
- ;;
- *-knuth)
- os=-mmixware
- ;;
- *-wec)
- os=-proelf
- ;;
- *-winbond)
- os=-proelf
- ;;
- *-oki)
- os=-proelf
- ;;
- *-hp)
- os=-hpux
- ;;
- *-hitachi)
- os=-hiux
- ;;
- i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
- os=-sysv
- ;;
- *-cbm)
- os=-amigaos
- ;;
- *-dg)
- os=-dgux
- ;;
- *-dolphin)
- os=-sysv3
- ;;
- m68k-ccur)
- os=-rtu
- ;;
- m88k-omron*)
- os=-luna
- ;;
- *-next )
- os=-nextstep
- ;;
- *-sequent)
- os=-ptx
- ;;
- *-crds)
- os=-unos
- ;;
- *-ns)
- os=-genix
- ;;
- i370-*)
- os=-mvs
- ;;
- *-next)
- os=-nextstep3
- ;;
- *-gould)
- os=-sysv
- ;;
- *-highlevel)
- os=-bsd
- ;;
- *-encore)
- os=-bsd
- ;;
- *-sgi)
- os=-irix
- ;;
- *-siemens)
- os=-sysv4
- ;;
- *-masscomp)
- os=-rtu
- ;;
- f30[01]-fujitsu | f700-fujitsu)
- os=-uxpv
- ;;
- *-rom68k)
- os=-coff
- ;;
- *-*bug)
- os=-coff
- ;;
- *-apple)
- os=-macos
- ;;
- *-atari*)
- os=-mint
- ;;
- *)
- os=-none
- ;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer. We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
- *-unknown)
- case $os in
- -riscix*)
- vendor=acorn
- ;;
- -sunos*)
- vendor=sun
- ;;
- -aix*)
- vendor=ibm
- ;;
- -beos*)
- vendor=be
- ;;
- -hpux*)
- vendor=hp
- ;;
- -mpeix*)
- vendor=hp
- ;;
- -hiux*)
- vendor=hitachi
- ;;
- -unos*)
- vendor=crds
- ;;
- -dgux*)
- vendor=dg
- ;;
- -luna*)
- vendor=omron
- ;;
- -genix*)
- vendor=ns
- ;;
- -mvs* | -opened*)
- vendor=ibm
- ;;
- -os400*)
- vendor=ibm
- ;;
- -ptx*)
- vendor=sequent
- ;;
- -tpf*)
- vendor=ibm
- ;;
- -vxsim* | -vxworks* | -windiss*)
- vendor=wrs
- ;;
- -aux*)
- vendor=apple
- ;;
- -hms*)
- vendor=hitachi
- ;;
- -mpw* | -macos*)
- vendor=apple
- ;;
- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
- vendor=atari
- ;;
- -vos*)
- vendor=stratus
- ;;
- esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
- ;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
+++ /dev/null
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.69 for recode 3.7-beta2.
-#
-#
-# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
-#
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# Use a proper internal environment variable to ensure we don't fall
- # into an infinite loop, continuously re-executing ourselves.
- if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
- _as_can_reexec=no; export _as_can_reexec;
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-as_fn_exit 255
- fi
- # We don't want this to propagate to other subprocesses.
- { _as_can_reexec=; unset _as_can_reexec;}
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1
-test -x / || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-
- test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
- ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
- ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
- ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
- PATH=/empty FPATH=/empty; export PATH FPATH
- test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
- || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- export CONFIG_SHELL
- # We cannot yet assume a decent shell, so we have to provide a
-# neutralization value for shells without unset; and this also
-# works around shells that cannot unset nonexistent variables.
-# Preserve -v and -x to the replacement shell.
-BASH_ENV=/dev/null
-ENV=/dev/null
-(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
-case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
-esac
-exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
-# Admittedly, this is quite paranoid, since all the known shells bail
-# out after a failed `exec'.
-$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
-exit 255
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
- # already done that, so ensure we don't try to do so again and fall
- # in an infinite loop. This has already happened in practice.
- _as_can_reexec=no; export _as_can_reexec
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-
-test -n "$DJDIR" || exec 7<&0 </dev/null
-exec 6>&1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME='recode'
-PACKAGE_TARNAME='recode'
-PACKAGE_VERSION='3.7-beta2'
-PACKAGE_STRING='recode 3.7-beta2'
-PACKAGE_BUGREPORT=''
-PACKAGE_URL=''
-
-ac_unique_file="src/recode.c"
-# Factoring default headers for most tests.
-ac_includes_default="\
-#include <stdio.h>
-#ifdef HAVE_SYS_TYPES_H
-# include <sys/types.h>
-#endif
-#ifdef HAVE_SYS_STAT_H
-# include <sys/stat.h>
-#endif
-#ifdef STDC_HEADERS
-# include <stdlib.h>
-# include <stddef.h>
-#else
-# ifdef HAVE_STDLIB_H
-# include <stdlib.h>
-# endif
-#endif
-#ifdef HAVE_STRING_H
-# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
-# include <memory.h>
-# endif
-# include <string.h>
-#endif
-#ifdef HAVE_STRINGS_H
-# include <strings.h>
-#endif
-#ifdef HAVE_INTTYPES_H
-# include <inttypes.h>
-#endif
-#ifdef HAVE_STDINT_H
-# include <stdint.h>
-#endif
-#ifdef HAVE_UNISTD_H
-# include <unistd.h>
-#endif"
-
-gt_needs=
-ac_subst_vars='am__EXEEXT_FALSE
-am__EXEEXT_TRUE
-LTLIBOBJS
-POSUB
-LTLIBINTL
-LIBINTL
-INTLLIBS
-INTL_MACOSX_LIBS
-XGETTEXT_EXTRA_OPTIONS
-MSGMERGE
-XGETTEXT_015
-XGETTEXT
-GMSGFMT_015
-MSGFMT_015
-GMSGFMT
-MSGFMT
-GETTEXT_MACRO_VERSION
-USE_NLS
-GLIBC21
-LIBOBJS
-LTLIBICONV
-LIBICONV
-LEXLIB
-LEX_OUTPUT_ROOT
-LEX
-ALLOCA
-CPP
-OTOOL64
-OTOOL
-LIPO
-NMEDIT
-DSYMUTIL
-MANIFEST_TOOL
-RANLIB
-ac_ct_AR
-AR
-DLLTOOL
-OBJDUMP
-LN_S
-NM
-ac_ct_DUMPBIN
-DUMPBIN
-LD
-FGREP
-EGREP
-GREP
-SED
-am__fastdepCC_FALSE
-am__fastdepCC_TRUE
-CCDEPMODE
-am__nodep
-AMDEPBACKSLASH
-AMDEP_FALSE
-AMDEP_TRUE
-am__quote
-am__include
-DEPDIR
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-host_os
-host_vendor
-host_cpu
-host
-build_os
-build_vendor
-build_cpu
-build
-LIBTOOL
-AM_BACKSLASH
-AM_DEFAULT_VERBOSITY
-AM_DEFAULT_V
-AM_V
-am__untar
-am__tar
-AMTAR
-am__leading_dot
-SET_MAKE
-AWK
-mkdir_p
-MKDIR_P
-INSTALL_STRIP_PROGRAM
-STRIP
-install_sh
-MAKEINFO
-AUTOHEADER
-AUTOMAKE
-AUTOCONF
-ACLOCAL
-VERSION
-PACKAGE
-CYGPATH_W
-am__isrc
-INSTALL_DATA
-INSTALL_SCRIPT
-INSTALL_PROGRAM
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-enable_silent_rules
-enable_shared
-enable_static
-with_pic
-enable_fast_install
-enable_dependency_tracking
-with_gnu_ld
-with_sysroot
-enable_libtool_lock
-enable_rpath
-with_libiconv_prefix
-with_dmalloc
-enable_nls
-with_libintl_prefix
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *=) ac_optarg= ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error $? "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error $? "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information"
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error $? "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error $? "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error $? "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures recode 3.7-beta2 to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking ...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/recode]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-
-Program names:
- --program-prefix=PREFIX prepend PREFIX to installed program names
- --program-suffix=SUFFIX append SUFFIX to installed program names
- --program-transform-name=PROGRAM run sed PROGRAM on installed program names
-
-System types:
- --build=BUILD configure for building on BUILD [guessed]
- --host=HOST cross-compile to build programs to run on HOST [BUILD]
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
- case $ac_init_help in
- short | recursive ) echo "Configuration of recode 3.7-beta2:";;
- esac
- cat <<\_ACEOF
-
-Optional Features:
- --disable-option-checking ignore unrecognized --enable/--with options
- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-silent-rules less verbose build output (undo: "make V=1")
- --disable-silent-rules verbose build output (undo: "make V=0")
- --enable-shared[=PKGS] build shared libraries [default=yes]
- --enable-static[=PKGS] build static libraries [default=yes]
- --enable-fast-install[=PKGS]
- optimize for fast installation [default=yes]
- --enable-dependency-tracking
- do not reject slow dependency extractors
- --disable-dependency-tracking
- speeds up one-time build
- --disable-libtool-lock avoid locking (might break parallel builds)
- --disable-rpath do not hardcode runtime library paths
- --disable-nls do not use Native Language Support
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
- both]
- --with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-sysroot=DIR Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).
- --with-gnu-ld assume the C compiler uses GNU ld default=no
- --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
- --without-libiconv-prefix don't search for libiconv in includedir and libdir
- --with-dmalloc use dmalloc, as in http://www.dmalloc.com
- --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
- --without-libintl-prefix don't search for libintl in includedir and libdir
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
- nonstandard directory <lib dir>
- LIBS libraries to pass to the linker, e.g. -l<library>
- CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
- you have headers in a nonstandard directory <include dir>
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-recode configure 3.7-beta2
-generated by GNU Autoconf 2.69
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- test -x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_c_check_header_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } > conftest.i && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then :
- ac_retval=0
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=$ac_status
-fi
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
- For example, HP-UX 11i <limits.h> declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- <limits.h> exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_func
-
-# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
-# -------------------------------------------
-# Tests whether TYPE exists after having included INCLUDES, setting cache
-# variable VAR accordingly.
-ac_fn_c_check_type ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=no"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-if (sizeof ($2))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-if (sizeof (($2)))
- return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- eval "$3=yes"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_type
-
-# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
-# -------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_c_check_header_mongrel ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval \${$3+:} false; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_header_compiler=yes
-else
- ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <$2>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- ac_header_preproc=yes
-else
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
- yes:no: )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
- no:yes:* )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
-esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval \${$3+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
-
-} # ac_fn_c_check_header_mongrel
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by recode $as_me 3.7-beta2, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- $as_echo "## ---------------- ##
-## Cache variables. ##
-## ---------------- ##"
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- $as_echo "## ----------------- ##
-## Output variables. ##
-## ----------------- ##"
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- $as_echo "## ------------------- ##
-## File substitutions. ##
-## ------------------- ##"
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- $as_echo "## ----------- ##
-## confdefs.h. ##
-## ----------- ##"
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- # We do not want a PATH search for config.site.
- case $CONFIG_SITE in #((
- -*) ac_site_file1=./$CONFIG_SITE;;
- */*) ac_site_file1=$CONFIG_SITE;;
- *) ac_site_file1=./$CONFIG_SITE;;
- esac
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file" \
- || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "failed to load site script $ac_site_file
-See \`config.log' for more details" "$LINENO" 5; }
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special files
- # actually), so we avoid doing that. DJGPP emulates it as a regular file.
- if test /dev/null != "$cache_file" && test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-gt_needs="$gt_needs "
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-am__api_version='1.13'
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
-
-# Find a good install program. We prefer a C program (faster),
-# so one script is as good as another. But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if ${ac_cv_path_install+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in #((
- ./ | .// | /[cC]/* | \
- /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
- ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
- /usr/ucb/* ) ;;
- *)
- # OSF1 and SCO ODT 3.0 have their own names for install.
- # Don't use installbsd from OSF since it installs stuff as root
- # by default.
- for ac_prog in ginstall scoinst install; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
- if test $ac_prog = install &&
- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # AIX install. It has an incompatible calling convention.
- :
- elif test $ac_prog = install &&
- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
- # program-specific install script used by HP pwplus--don't use.
- :
- else
- rm -rf conftest.one conftest.two conftest.dir
- echo one > conftest.one
- echo two > conftest.two
- mkdir conftest.dir
- if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
- test -s conftest.one && test -s conftest.two &&
- test -s conftest.dir/conftest.one &&
- test -s conftest.dir/conftest.two
- then
- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
- break 3
- fi
- fi
- fi
- done
- done
- ;;
-esac
-
- done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
- if test "${ac_cv_path_install+set}" = set; then
- INSTALL=$ac_cv_path_install
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for INSTALL within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- INSTALL=$ac_install_sh
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
-$as_echo_n "checking whether build environment is sane... " >&6; }
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name. Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
- *[\\\"\#\$\&\'\`$am_lf]*)
- as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
-esac
-case $srcdir in
- *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- am_has_slept=no
- for am_try in 1 2; do
- echo "timestamp, slept: $am_has_slept" > conftest.file
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
- alias in your environment" "$LINENO" 5
- fi
- if test "$2" = conftest.file || test $am_try -eq 2; then
- break
- fi
- # Just in case.
- sleep 1
- am_has_slept=yes
- done
- test "$2" = conftest.file
- )
-then
- # Ok.
- :
-else
- as_fn_error $? "newly created file is older than distributed files!
-Check your system clock" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
- ( sleep 1 ) &
- am_sleep_pid=$!
-fi
-
-rm -f conftest.file
-
-test "$program_prefix" != NONE &&
- program_transform_name="s&^&$program_prefix&;$program_transform_name"
-# Use a double $ so make ignores it.
-test "$program_suffix" != NONE &&
- program_transform_name="s&\$&$program_suffix&;$program_transform_name"
-# Double any \ or $.
-# By default was `s,x,x', remove it if useless.
-ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
-program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-
-if test x"${MISSING+set}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
- *)
- MISSING="\${SHELL} $am_aux_dir/missing" ;;
- esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --is-lightweight"; then
- am_missing_run="$MISSING "
-else
- am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
-fi
-
-if test x"${install_sh}" != xset; then
- case $am_aux_dir in
- *\ * | *\ *)
- install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
- *)
- install_sh="\${SHELL} $am_aux_dir/install-sh"
- esac
-fi
-
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip". However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
- if ${ac_cv_path_mkdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in mkdir gmkdir; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
- case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
- 'mkdir (GNU coreutils) '* | \
- 'mkdir (coreutils) '* | \
- 'mkdir (fileutils) '4.1*)
- ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
- break 3;;
- esac
- done
- done
- done
-IFS=$as_save_IFS
-
-fi
-
- test -d ./--version && rmdir ./--version
- if test "${ac_cv_path_mkdir+set}" = set; then
- MKDIR_P="$ac_cv_path_mkdir -p"
- else
- # As a last resort, use the slow shell script. Don't cache a
- # value for MKDIR_P within a source directory, because that will
- # break other packages using the cache if that directory is
- # removed, or if the value is a relative name.
- MKDIR_P="$ac_install_sh -d"
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AWK+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
-set x ${MAKE-make}
-ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat >conftest.make <<\_ACEOF
-SHELL = /bin/sh
-all:
- @echo '@@@%%%=$(MAKE)=@@@%%%'
-_ACEOF
-# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
-case `${MAKE-make} -f conftest.make 2>/dev/null` in
- *@@@%%%=?*=@@@%%%*)
- eval ac_cv_prog_make_${ac_make}_set=yes;;
- *)
- eval ac_cv_prog_make_${ac_make}_set=no;;
-esac
-rm -f conftest.make
-fi
-if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- SET_MAKE=
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- SET_MAKE="MAKE=${MAKE-make}"
-fi
-
-rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
- am__leading_dot=.
-else
- am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-
-# Check whether --enable-silent-rules was given.
-if test "${enable_silent_rules+set}" = set; then :
- enableval=$enable_silent_rules;
-fi
-
-case $enable_silent_rules in # (((
- yes) AM_DEFAULT_VERBOSITY=0;;
- no) AM_DEFAULT_VERBOSITY=1;;
- *) AM_DEFAULT_VERBOSITY=1;;
-esac
-am_make=${MAKE-make}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
-$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
-if ${am_cv_make_support_nested_variables+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if $as_echo 'TRUE=$(BAR$(V))
-BAR0=false
-BAR1=true
-V=1
-am__doit:
- @$(TRUE)
-.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
- am_cv_make_support_nested_variables=yes
-else
- am_cv_make_support_nested_variables=no
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
-$as_echo "$am_cv_make_support_nested_variables" >&6; }
-if test $am_cv_make_support_nested_variables = yes; then
- AM_V='$(V)'
- AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
- AM_V=$AM_DEFAULT_VERBOSITY
- AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
-AM_BACKSLASH='\'
-
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
- # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
- # is not polluted with repeated "-I."
- am__isrc=' -I$(srcdir)'
- # test to see if srcdir already configured
- if test -f $srcdir/config.status; then
- as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
- fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
- if (cygpath --version) >/dev/null 2>/dev/null; then
- CYGPATH_W='cygpath -w'
- else
- CYGPATH_W=echo
- fi
-fi
-
-
-# Define the identity of the package.
- PACKAGE='recode'
- VERSION='3.7-beta2'
-
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE "$PACKAGE"
-_ACEOF
-
-
-cat >>confdefs.h <<_ACEOF
-#define VERSION "$VERSION"
-_ACEOF
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
-
-
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
-# For better backward compatibility. To be removed once Automake 1.9.x
-# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-mkdir_p='$(MKDIR_P)'
-
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility. Yes, it's still used
-# in the wild :-( We should find a proper way to deprecate it ...
-AMTAR='$${TAR-tar}'
-
-
-# We'll loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar pax cpio none'
-
-am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
-
-
-
-
-
-
-
-case `pwd` in
- *\ * | *\ *)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
-$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
-esac
-
-
-
-macro_version='2.4.2'
-macro_revision='1.3337'
-
-
-
-
-
-
-
-
-
-
-
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if ${ac_cv_build+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if ${ac_cv_host+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
-$as_echo_n "checking how to print strings... " >&6; }
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='printf %s\n'
-else
- # Use this function as a fallback that always works.
- func_fallback_echo ()
- {
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
- }
- ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO ""
-}
-
-case "$ECHO" in
- printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
-$as_echo "printf" >&6; } ;;
- print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
-$as_echo "print -r" >&6; } ;;
- *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
-$as_echo "cat" >&6; } ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-DEPDIR="${am__leading_dot}deps"
-
-ac_config_commands="$ac_config_commands depfiles"
-
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
- @echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
-
-# Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then :
- enableval=$enable_dependency_tracking;
-fi
-
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
- am__nodep='_no'
-fi
- if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-if test -z "$ac_file"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "C compiler cannot create executables
-See \`config.log' for more details" "$LINENO" 5; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-ac_exeext=$ac_cv_exeext
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdio.h>
-int
-main ()
-{
-FILE *f = fopen ("conftest.out", "w");
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files="$ac_clean_files conftest.out"
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-if test "$cross_compiling" != yes; then
- { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if { ac_try='./conftest$ac_cv_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details" "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
-ac_clean_files=$ac_clean_files_save
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if ${ac_cv_objext+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if ${ac_cv_path_SED+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
- for ac_i in 1 2 3 4 5 6 7; do
- ac_script="$ac_script$as_nl$ac_script"
- done
- echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
- { ac_script=; unset ac_script;}
- if test -z "$SED"; then
- ac_path_SED_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_SED" || continue
-# Check for GNU ac_path_SED and select it if it is found.
- # Check for GNU $ac_path_SED
-case `"$ac_path_SED" --version 2>&1` in
-*GNU*)
- ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo '' >> "conftest.nl"
- "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_SED_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_SED="$ac_path_SED"
- ac_path_SED_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_SED_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_SED"; then
- as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
- fi
-else
- ac_cv_path_SED=$SED
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
-$as_echo "$ac_cv_path_SED" >&6; }
- SED="$ac_cv_path_SED"
- rm -f conftest.sed
-
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if ${ac_cv_path_GREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_GREP" || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if ${ac_cv_path_EGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_EGREP" || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
-$as_echo_n "checking for fgrep... " >&6; }
-if ${ac_cv_path_FGREP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
- then ac_cv_path_FGREP="$GREP -F"
- else
- if test -z "$FGREP"; then
- ac_path_FGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in fgrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
- as_fn_executable_p "$ac_path_FGREP" || continue
-# Check for GNU ac_path_FGREP and select it if it is found.
- # Check for GNU $ac_path_FGREP
-case `"$ac_path_FGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'FGREP' >> "conftest.nl"
- "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_FGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_FGREP="$ac_path_FGREP"
- ac_path_FGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_FGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_FGREP"; then
- as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_FGREP=$FGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
-$as_echo "$ac_cv_path_FGREP" >&6; }
- FGREP="$ac_cv_path_FGREP"
-
-
-test -z "$GREP" && GREP=grep
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | ?:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${lt_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${lt_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
-$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
-if ${lt_cv_path_NM+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- : ${lt_cv_path_NM=no}
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
-$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
-else
- # Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$DUMPBIN"; then :
- # Let the user override the test.
- else
- if test -n "$ac_tool_prefix"; then
- for ac_prog in dumpbin "link -dump"
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DUMPBIN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DUMPBIN"; then
- ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-DUMPBIN=$ac_cv_prog_DUMPBIN
-if test -n "$DUMPBIN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
-$as_echo "$DUMPBIN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$DUMPBIN" && break
- done
-fi
-if test -z "$DUMPBIN"; then
- ac_ct_DUMPBIN=$DUMPBIN
- for ac_prog in dumpbin "link -dump"
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_DUMPBIN"; then
- ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
-if test -n "$ac_ct_DUMPBIN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
-$as_echo "$ac_ct_DUMPBIN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_DUMPBIN" && break
-done
-
- if test "x$ac_ct_DUMPBIN" = x; then
- DUMPBIN=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- DUMPBIN=$ac_ct_DUMPBIN
- fi
-fi
-
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
- *COFF*)
- DUMPBIN="$DUMPBIN -symbols"
- ;;
- *)
- DUMPBIN=:
- ;;
- esac
- fi
-
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
- fi
-fi
-test -z "$NM" && NM=nm
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
-$as_echo_n "checking the name lister ($NM) interface... " >&6; }
-if ${lt_cv_nm_interface+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_nm_interface="BSD nm"
- echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
- (eval "$ac_compile" 2>conftest.err)
- cat conftest.err >&5
- (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
- cat conftest.err >&5
- (eval echo "\"\$as_me:$LINENO: output\"" >&5)
- cat conftest.out >&5
- if $GREP 'External.*some_variable' conftest.out > /dev/null; then
- lt_cv_nm_interface="MS dumpbin"
- fi
- rm -f conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
-$as_echo "$lt_cv_nm_interface" >&6; }
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
-fi
-
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if ${lt_cv_sys_max_cmd_len+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw* | cegcc*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- mint*)
- # On MiNT this can take a long time and run out of memory.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- os2*)
- # The test takes a long time on OS/2.
- lt_cv_sys_max_cmd_len=8192
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len" && \
- test undefined != "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- # Make teststring a little bigger before we do anything with it.
- # a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
- teststring=$teststring$teststring
- done
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
- = "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- # Only check the string length outside the loop.
- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
- teststring=
- # Add a significant safety factor because C++ compilers can tack on
- # massive amounts of additional arguments before passing them to the
- # linker. It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
-$as_echo "none" >&6; }
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-
-
-
-
-
-: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- lt_unset=unset
-else
- lt_unset=false
-fi
-
-
-
-
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- lt_SP2NL='tr \040 \012'
- lt_NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- lt_SP2NL='tr \100 \n'
- lt_NL2SP='tr \r\n \100\100'
- ;;
-esac
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
-$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
-if ${lt_cv_to_host_file_cmd+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $host in
- *-*-mingw* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
- ;;
- *-*-cygwin* )
- lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
- ;;
- * ) # otherwise, assume *nix
- lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
- ;;
- esac
- ;;
- *-*-cygwin* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
- ;;
- *-*-cygwin* )
- lt_cv_to_host_file_cmd=func_convert_file_noop
- ;;
- * ) # otherwise, assume *nix
- lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
- ;;
- esac
- ;;
- * ) # unhandled hosts (and "normal" native builds)
- lt_cv_to_host_file_cmd=func_convert_file_noop
- ;;
-esac
-
-fi
-
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
-$as_echo "$lt_cv_to_host_file_cmd" >&6; }
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
-$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
-if ${lt_cv_to_tool_file_cmd+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- #assume ordinary cross tools, or native build.
-lt_cv_to_tool_file_cmd=func_convert_file_noop
-case $host in
- *-*-mingw* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
- ;;
- esac
- ;;
-esac
-
-fi
-
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
-$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if ${lt_cv_ld_reload_flag+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_reload_flag='-r'
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
- reload_cmds=false
- fi
- ;;
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OBJDUMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OBJDUMP"; then
- ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
- ac_ct_OBJDUMP=$OBJDUMP
- # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OBJDUMP"; then
- ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OBJDUMP="objdump"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_OBJDUMP" = x; then
- OBJDUMP="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OBJDUMP=$ac_ct_OBJDUMP
- fi
-else
- OBJDUMP="$ac_cv_prog_OBJDUMP"
-fi
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if ${lt_cv_deplibs_check_method+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[4-9]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[45]*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- # Keep this pattern in sync with the one in func_win32_libid.
- lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-cegcc*)
- # use the weaker test based on 'objdump'. See mingw*.
- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-haiku*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[3-9]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-*nto* | *qnx*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-tpf*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
-$as_echo "$lt_cv_deplibs_check_method" >&6; }
-
-file_magic_glob=
-want_nocaseglob=no
-if test "$build" = "$host"; then
- case $host_os in
- mingw* | pw32*)
- if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
- want_nocaseglob=yes
- else
- file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
- fi
- ;;
- esac
-fi
-
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DLLTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DLLTOOL"; then
- ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
- ac_ct_DLLTOOL=$DLLTOOL
- # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_DLLTOOL"; then
- ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_DLLTOOL="dlltool"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_DLLTOOL" = x; then
- DLLTOOL="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- DLLTOOL=$ac_ct_DLLTOOL
- fi
-else
- DLLTOOL="$ac_cv_prog_DLLTOOL"
-fi
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
-$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
-if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_sharedlib_from_linklib_cmd='unknown'
-
-case $host_os in
-cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
- case `$DLLTOOL --help 2>&1` in
- *--identify-strict*)
- lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
- ;;
- *)
- lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
- ;;
- esac
- ;;
-*)
- # fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
- ;;
-esac
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
-$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
-sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
- for ac_prog in ar
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AR"; then
- ac_cv_prog_AR="$AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AR=$ac_cv_prog_AR
-if test -n "$AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
-$as_echo "$AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AR" && break
- done
-fi
-if test -z "$AR"; then
- ac_ct_AR=$AR
- for ac_prog in ar
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_AR+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_AR"; then
- ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_AR="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_AR=$ac_cv_prog_ac_ct_AR
-if test -n "$ac_ct_AR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
-$as_echo "$ac_ct_AR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_AR" && break
-done
-
- if test "x$ac_ct_AR" = x; then
- AR="false"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- AR=$ac_ct_AR
- fi
-fi
-
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
-$as_echo_n "checking for archiver @FILE support... " >&6; }
-if ${lt_cv_ar_at_file+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ar_at_file=no
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- echo conftest.$ac_objext > conftest.lst
- lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
- { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
- (eval $lt_ar_try) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if test "$ac_status" -eq 0; then
- # Ensure the archiver fails upon bogus file names.
- rm -f conftest.$ac_objext libconftest.a
- { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
- (eval $lt_ar_try) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- if test "$ac_status" -ne 0; then
- lt_cv_ar_at_file=@
- fi
- fi
- rm -f conftest.* libconftest.a
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
-$as_echo "$lt_cv_ar_at_file" >&6; }
-
-if test "x$lt_cv_ar_at_file" = xno; then
- archiver_list_spec=
-else
- archiver_list_spec=$lt_cv_ar_at_file
-fi
-
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$STRIP"; then
- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
- ac_ct_STRIP=$STRIP
- # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_STRIP"; then
- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_STRIP="strip"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_STRIP" = x; then
- STRIP=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- STRIP=$ac_ct_STRIP
- fi
-else
- STRIP="$ac_cv_prog_STRIP"
-fi
-
-test -z "$STRIP" && STRIP=:
-
-
-
-
-
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_RANLIB"; then
- ac_ct_RANLIB=$RANLIB
- # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_RANLIB"; then
- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_RANLIB="ranlib"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_RANLIB" = x; then
- RANLIB=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- RANLIB=$ac_ct_RANLIB
- fi
-else
- RANLIB="$ac_cv_prog_RANLIB"
-fi
-
-test -z "$RANLIB" && RANLIB=:
-
-
-
-
-
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
-fi
-
-case $host_os in
- darwin*)
- lock_old_archive_extraction=yes ;;
- *)
- lock_old_archive_extraction=no ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if ${lt_cv_sys_global_symbol_pipe+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[BCDT]'
- ;;
-cygwin* | mingw* | pw32* | cegcc*)
- symcode='[ABCDGISTW]'
- ;;
-hpux*)
- if test "$host_cpu" = ia64; then
- symcode='[ABCDEGRST]'
- fi
- ;;
-irix* | nonstopux*)
- symcode='[BCDEGRST]'
- ;;
-osf*)
- symcode='[BCDEGQRST]'
- ;;
-solaris*)
- symcode='[BDRT]'
- ;;
-sco3.2v5*)
- symcode='[DT]'
- ;;
-sysv4.2uw2*)
- symcode='[DT]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[ABDT]'
- ;;
-sysv4)
- symcode='[DFNSTU]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[ABCDGIRSTW]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
- # Also find C++ and __fastcall symbols from MSVC++,
- # which start with @ or ?.
- lt_cv_sys_global_symbol_pipe="$AWK '"\
-" {last_section=section; section=\$ 3};"\
-" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-" \$ 0!~/External *\|/{next};"\
-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-" ' prfx=^$ac_symprfx"
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
- lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
- (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
- relocations are performed -- see ld's documentation on pseudo-relocs. */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data. */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
- cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols. */
-LT_DLSYM_CONST struct {
- const char *name;
- void *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[] =
-{
- { "@PROGRAM@", (void *) 0 },
-_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
- cat <<\_LT_EOF >> conftest.$ac_ext
- {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_globsym_save_LIBS=$LIBS
- lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS=$lt_globsym_save_LIBS
- CFLAGS=$lt_globsym_save_CFLAGS
- else
- echo "cannot find nm_test_func in $nlist" >&5
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&5
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
- fi
- else
- echo "$progname: failed program was:" >&5
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
-$as_echo "failed" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
-$as_echo "ok" >&6; }
-fi
-
-# Response file support.
-if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- nm_file_list_spec='@'
-elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
- nm_file_list_spec='@'
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
-$as_echo_n "checking for sysroot... " >&6; }
-
-# Check whether --with-sysroot was given.
-if test "${with_sysroot+set}" = set; then :
- withval=$with_sysroot;
-else
- with_sysroot=no
-fi
-
-
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
- if test "$GCC" = yes; then
- lt_sysroot=`$CC --print-sysroot 2>/dev/null`
- fi
- ;; #(
- /*)
- lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
- ;; #(
- no|'')
- ;; #(
- *)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
- as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
- ;;
-esac
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
-$as_echo "${lt_sysroot:-no}" >&6; }
-
-
-
-
-
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then :
- enableval=$enable_libtool_lock;
-fi
-
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '#line '$LINENO' "configure"' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- case `/usr/bin/file conftest.o` in
- *x86-64*)
- LD="${LD-ld} -m elf32_x86_64"
- ;;
- *)
- LD="${LD-ld} -m elf_i386"
- ;;
- esac
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*|s390*-*tpf*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if ${lt_cv_cc_needs_belf+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- lt_cv_cc_needs_belf=yes
-else
- lt_cv_cc_needs_belf=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*)
- case $host in
- i?86-*-solaris*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- sparc*-*-solaris*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
- if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
- fi
- ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-esac
-
-need_locks="$enable_libtool_lock"
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
-set dummy ${ac_tool_prefix}mt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$MANIFEST_TOOL"; then
- ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
-if test -n "$MANIFEST_TOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
-$as_echo "$MANIFEST_TOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
- ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
- # Extract the first word of "mt", so it can be a program name with args.
-set dummy mt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_MANIFEST_TOOL"; then
- ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
-if test -n "$ac_ct_MANIFEST_TOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
-$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_MANIFEST_TOOL" = x; then
- MANIFEST_TOOL=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
- fi
-else
- MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
-fi
-
-test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
-$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
-if ${lt_cv_path_mainfest_tool+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_path_mainfest_tool=no
- echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
- $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
- cat conftest.err >&5
- if $GREP 'Manifest Tool' conftest.out > /dev/null; then
- lt_cv_path_mainfest_tool=yes
- fi
- rm -f conftest*
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
-$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
- MANIFEST_TOOL=:
-fi
-
-
-
-
-
-
- case $host_os in
- rhapsody* | darwin*)
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_DSYMUTIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$DSYMUTIL"; then
- ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
- ac_ct_DSYMUTIL=$DSYMUTIL
- # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_DSYMUTIL"; then
- ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_DSYMUTIL" = x; then
- DSYMUTIL=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- DSYMUTIL=$ac_ct_DSYMUTIL
- fi
-else
- DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
-
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_NMEDIT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$NMEDIT"; then
- ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
- ac_ct_NMEDIT=$NMEDIT
- # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_NMEDIT"; then
- ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_NMEDIT="nmedit"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_NMEDIT" = x; then
- NMEDIT=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- NMEDIT=$ac_ct_NMEDIT
- fi
-else
- NMEDIT="$ac_cv_prog_NMEDIT"
-fi
-
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
-set dummy ${ac_tool_prefix}lipo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LIPO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$LIPO"; then
- ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-LIPO=$ac_cv_prog_LIPO
-if test -n "$LIPO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
-$as_echo "$LIPO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_LIPO"; then
- ac_ct_LIPO=$LIPO
- # Extract the first word of "lipo", so it can be a program name with args.
-set dummy lipo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_LIPO"; then
- ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_LIPO="lipo"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
-if test -n "$ac_ct_LIPO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
-$as_echo "$ac_ct_LIPO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_LIPO" = x; then
- LIPO=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- LIPO=$ac_ct_LIPO
- fi
-else
- LIPO="$ac_cv_prog_LIPO"
-fi
-
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL"; then
- ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL"; then
- ac_ct_OTOOL=$OTOOL
- # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OTOOL"; then
- ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OTOOL="otool"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
-if test -n "$ac_ct_OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
-$as_echo "$ac_ct_OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_OTOOL" = x; then
- OTOOL=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OTOOL=$ac_ct_OTOOL
- fi
-else
- OTOOL="$ac_cv_prog_OTOOL"
-fi
-
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
-set dummy ${ac_tool_prefix}otool64; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL64+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL64"; then
- ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL64=$ac_cv_prog_OTOOL64
-if test -n "$OTOOL64"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
-$as_echo "$OTOOL64" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_OTOOL64"; then
- ac_ct_OTOOL64=$OTOOL64
- # Extract the first word of "otool64", so it can be a program name with args.
-set dummy otool64; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_OTOOL64"; then
- ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_OTOOL64="otool64"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
-if test -n "$ac_ct_OTOOL64"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
-$as_echo "$ac_ct_OTOOL64" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_OTOOL64" = x; then
- OTOOL64=":"
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- OTOOL64=$ac_ct_OTOOL64
- fi
-else
- OTOOL64="$ac_cv_prog_OTOOL64"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if ${lt_cv_apple_cc_single_mod+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- rm -rf libconftest.dylib*
- echo "int foo(void){return 1;}" > conftest.c
- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&5
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
- _lt_result=$?
- # If there is a non-empty error log, and "single_module"
- # appears in it, assume the flag caused a linker warning
- if test -s conftest.err && $GREP single_module conftest.err; then
- cat conftest.err >&5
- # Otherwise, if the output was created with a 0 exit code from
- # the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
- lt_cv_apple_cc_single_mod=yes
- else
- cat conftest.err >&5
- fi
- rm -rf libconftest.dylib*
- rm -f conftest.*
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if ${lt_cv_ld_exported_symbols_list+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- lt_cv_ld_exported_symbols_list=yes
-else
- lt_cv_ld_exported_symbols_list=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
-$as_echo_n "checking for -force_load linker flag... " >&6; }
-if ${lt_cv_ld_force_load+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_ld_force_load=no
- cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
- echo "$AR cru libconftest.a conftest.o" >&5
- $AR cru libconftest.a conftest.o 2>&5
- echo "$RANLIB libconftest.a" >&5
- $RANLIB libconftest.a 2>&5
- cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
- $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
- _lt_result=$?
- if test -s conftest.err && $GREP force_load conftest.err; then
- cat conftest.err >&5
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
- lt_cv_ld_force_load=yes
- else
- cat conftest.err >&5
- fi
- rm -f conftest.err libconftest.a conftest conftest.c
- rm -rf conftest.dSYM
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
-$as_echo "$lt_cv_ld_force_load" >&6; }
- case $host_os in
- rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*) # darwin 5.x on
- # if running on 10.5 or later, the deployment target defaults
- # to the OS version, if on x86, and 10.4, the deployment
- # target defaults to 10.4. Don't you love it?
- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- esac
- ;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
- fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
- else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
- _lt_dsymutil='~$DSYMUTIL $lib || :'
- else
- _lt_dsymutil=
- fi
- ;;
- esac
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
- # <limits.h> exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ac_nonexistent.h>
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.i conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details" "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
-else
- ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
- inttypes.h stdint.h unistd.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
-"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-for ac_header in dlfcn.h
-do :
- ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
-"
-if test "x$ac_cv_header_dlfcn_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_DLFCN_H 1
-_ACEOF
-
-fi
-
-done
-
-
-
-
-
-# Set options
-
-
-
- enable_dlopen=no
-
-
- enable_win32_dll=no
-
-
- # Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then :
- enableval=$enable_shared; p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_shared=yes
-fi
-
-
-
-
-
-
-
-
-
- # Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then :
- enableval=$enable_static; p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_static=yes
-fi
-
-
-
-
-
-
-
-
-
-
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then :
- withval=$with_pic; lt_p=${PACKAGE-default}
- case $withval in
- yes|no) pic_mode=$withval ;;
- *)
- pic_mode=default
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
- if test "X$lt_pkg" = "X$lt_p"; then
- pic_mode=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- pic_mode=default
-fi
-
-
-test -z "$pic_mode" && pic_mode=default
-
-
-
-
-
-
-
- # Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then :
- enableval=$enable_fast_install; p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac
-else
- enable_fast_install=yes
-fi
-
-
-
-
-
-
-
-
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-test -z "$LN_S" && LN_S="ln -s"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
-$as_echo_n "checking for objdir... " >&6; }
-if ${lt_cv_objdir+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
-$as_echo "$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define LT_OBJDIR "$lt_cv_objdir/"
-_ACEOF
-
-
-
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
-
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if ${lt_cv_path_MAGIC_CMD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
-$as_echo_n "checking for file... " >&6; }
-if ${lt_cv_path_MAGIC_CMD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $MAGIC_CMD in
-[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac
-fi
-
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- else
- MAGIC_CMD=:
- fi
-fi
-
- fi
- ;;
-esac
-
-# Use C for the default configuration in the libtool script
-
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-
-
-
-
-
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-
-lt_prog_compiler_no_builtin_flag=
-
-if test "$GCC" = yes; then
- case $cc_basename in
- nvcc*)
- lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
- *)
- lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
- esac
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_rtti_exceptions=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_rtti_exceptions=yes
- fi
- fi
- $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
- lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
-else
- :
-fi
-
-fi
-
-
-
-
-
-
- lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
-
-
- if test "$GCC" = yes; then
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_static='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- lt_prog_compiler_pic='-fPIC'
- ;;
- m68k)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
- ;;
- esac
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- lt_prog_compiler_pic='-fno-common'
- ;;
-
- haiku*)
- # PIC is the default for Haiku.
- # The "-static" flag exists, but is broken.
- lt_prog_compiler_static=
- ;;
-
- hpux*)
- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
- # sets the default TLS model and affects inlining.
- case $host_cpu in
- hppa*64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
- ;;
-
- interix[3-9]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- lt_prog_compiler_can_build_shared=no
- enable_shared=no
- ;;
-
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- lt_prog_compiler_pic='-fPIC -shared'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- lt_prog_compiler_pic=-Kconform_pic
- fi
- ;;
-
- *)
- lt_prog_compiler_pic='-fPIC'
- ;;
- esac
-
- case $cc_basename in
- nvcc*) # Cuda Compiler Driver 2.2
- lt_prog_compiler_wl='-Xlinker '
- if test -n "$lt_prog_compiler_pic"; then
- lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
- fi
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- lt_prog_compiler_static='-Bstatic'
- else
- lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
-
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- lt_prog_compiler_pic='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- lt_prog_compiler_wl='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- lt_prog_compiler_pic='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- lt_prog_compiler_wl='-Wl,'
- # PIC (with -KPIC) is the default.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
- ecc*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-static'
- ;;
- # icc used to be incompatible with GCC.
- # ICC 10 doesn't accept -KPIC any more.
- icc* | ifort*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fPIC'
- lt_prog_compiler_static='-static'
- ;;
- # Lahey Fortran 8.1.
- lf95*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='--shared'
- lt_prog_compiler_static='--static'
- ;;
- nagfor*)
- # NAG Fortran compiler
- lt_prog_compiler_wl='-Wl,-Wl,,'
- lt_prog_compiler_pic='-PIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fpic'
- lt_prog_compiler_static='-Bstatic'
- ;;
- ccc*)
- lt_prog_compiler_wl='-Wl,'
- # All Alpha code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
- xl* | bgxl* | bgf* | mpixl*)
- # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-qpic'
- lt_prog_compiler_static='-qstaticlink'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl=''
- ;;
- *Sun\ F* | *Sun*Fortran*)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Qoption ld '
- ;;
- *Sun\ C*)
- # Sun C 5.9
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- lt_prog_compiler_wl='-Wl,'
- ;;
- *Intel*\ [CF]*Compiler*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fPIC'
- lt_prog_compiler_static='-static'
- ;;
- *Portland\ Group*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-fpic'
- lt_prog_compiler_static='-Bstatic'
- ;;
- esac
- ;;
- esac
- ;;
-
- newsos6)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- lt_prog_compiler_pic='-fPIC -shared'
- ;;
-
- osf3* | osf4* | osf5*)
- lt_prog_compiler_wl='-Wl,'
- # All OSF/1 code is PIC.
- lt_prog_compiler_static='-non_shared'
- ;;
-
- rdos*)
- lt_prog_compiler_static='-non_shared'
- ;;
-
- solaris*)
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- lt_prog_compiler_wl='-Qoption ld ';;
- *)
- lt_prog_compiler_wl='-Wl,';;
- esac
- ;;
-
- sunos4*)
- lt_prog_compiler_wl='-Qoption ld '
- lt_prog_compiler_pic='-PIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- lt_prog_compiler_pic='-Kconform_pic'
- lt_prog_compiler_static='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_pic='-KPIC'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- unicos*)
- lt_prog_compiler_wl='-Wl,'
- lt_prog_compiler_can_build_shared=no
- ;;
-
- uts4*)
- lt_prog_compiler_pic='-pic'
- lt_prog_compiler_static='-Bstatic'
- ;;
-
- *)
- lt_prog_compiler_can_build_shared=no
- ;;
- esac
- fi
-
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- lt_prog_compiler_pic=
- ;;
- *)
- lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
- ;;
-esac
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-if ${lt_cv_prog_compiler_pic+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
-$as_echo "$lt_cv_prog_compiler_pic" >&6; }
-lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if ${lt_cv_prog_compiler_pic_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_pic_works=no
- ac_outfile=conftest.$ac_objext
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_pic_works=yes
- fi
- fi
- $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
- case $lt_prog_compiler_pic in
- "" | " "*) ;;
- *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
- esac
-else
- lt_prog_compiler_pic=
- lt_prog_compiler_can_build_shared=no
-fi
-
-fi
-
-
-
-
-
-
-
-
-
-
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if ${lt_cv_prog_compiler_static_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_static_works=yes
- fi
- else
- lt_cv_prog_compiler_static_works=yes
- fi
- fi
- $RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
- :
-else
- lt_prog_compiler_static=
-fi
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if ${lt_cv_prog_compiler_c_o+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o=no
- $RM -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o=yes
- fi
- fi
- chmod u+w . 2>&5
- $RM conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
- $RM out/* && rmdir out
- cd ..
- $RM -r conftest
- $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if ${lt_cv_prog_compiler_c_o+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler_c_o=no
- $RM -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&5
- echo "$as_me:$LINENO: \$? = $ac_status" >&5
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- lt_cv_prog_compiler_c_o=yes
- fi
- fi
- chmod u+w . 2>&5
- $RM conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
- $RM out/* && rmdir out
- cd ..
- $RM -r conftest
- $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
-
-
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
- hard_links=yes
- $RM conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-
- runpath_var=
- allow_undefined_flag=
- always_export_symbols=no
- archive_cmds=
- archive_expsym_cmds=
- compiler_needs_object=no
- enable_shared_with_static_runtimes=no
- export_dynamic_flag_spec=
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- hardcode_automatic=no
- hardcode_direct=no
- hardcode_direct_absolute=no
- hardcode_libdir_flag_spec=
- hardcode_libdir_separator=
- hardcode_minus_L=no
- hardcode_shlibpath_var=unsupported
- inherit_rpath=no
- link_all_deplibs=unknown
- module_cmds=
- module_expsym_cmds=
- old_archive_from_new_cmds=
- old_archive_from_expsyms_cmds=
- thread_safe_flag_spec=
- whole_archive_flag_spec=
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- include_expsyms=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
- extract_expsyms_cmds=
-
- case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- linux* | k*bsd*-gnu | gnu*)
- link_all_deplibs=no
- ;;
- esac
-
- ld_shlibs=yes
-
- # On some targets, GNU ld is compatible enough with the native linker
- # that we're better off using the native interface for both.
- lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
- case $host_os in
- aix*)
- # The AIX port of GNU ld has always aspired to compatibility
- # with the native linker. However, as the warning in the GNU ld
- # block says, versions before 2.19.5* couldn't really create working
- # shared libraries, regardless of the interface used.
- case `$LD -v 2>&1` in
- *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
- *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
- *\ \(GNU\ Binutils\)\ [3-9]*) ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- fi
-
- if test "$lt_use_gnu_ld_interface" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- whole_archive_flag_spec=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>&1` in
- *GNU\ gold*) supports_anon_versioning=yes ;;
- *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[3-9]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.19, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
-
-_LT_EOF
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds=''
- ;;
- m68k)
- archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
-
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- allow_undefined_flag=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
- # as there is no search path for DLLs.
- hardcode_libdir_flag_spec='-L$libdir'
- export_dynamic_flag_spec='${wl}--export-all-symbols'
- allow_undefined_flag=unsupported
- always_export_symbols=no
- enable_shared_with_static_runtimes=yes
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
- exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- haiku*)
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- link_all_deplibs=yes
- ;;
-
- interix[3-9]*)
- hardcode_direct=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
- tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
- case $cc_basename in
- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
- esac
- fi
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
- tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- lf95*) # Lahey Fortran 8.1
- whole_archive_flag_spec=
- tmp_sharedflag='--shared' ;;
- xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
- tmp_sharedflag='-qmkshrobj'
- tmp_addflag= ;;
- nvcc*) # Cuda Compiler Driver 2.2
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- compiler_needs_object=yes
- ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- compiler_needs_object=yes
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
-
- case $cc_basename in
- xlf* | bgf* | bgxlf* | mpixlf*)
- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
- whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
- else
- ld_shlibs=no
- fi
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
- ld_shlibs=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- ld_shlibs=no
- fi
- ;;
- esac
-
- if test "$ld_shlibs" = no; then
- runpath_var=
- hardcode_libdir_flag_spec=
- export_dynamic_flag_spec=
- whole_archive_flag_spec=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- hardcode_direct=unsupported
- fi
- ;;
-
- aix[4-9]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- archive_cmds=''
- hardcode_direct=yes
- hardcode_direct_absolute=yes
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- file_list_spec='${wl}-f,'
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[012]|aix4.[012].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- hardcode_direct=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- hardcode_minus_L=yes
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_libdir_separator=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- link_all_deplibs=no
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- export_dynamic_flag_spec='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- allow_undefined_flag='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
- aix_libpath=$lt_cv_aix_libpath
-else
- if ${lt_cv_aix_libpath_+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
- lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\([^ ]*\) *$/\1/
- p
- }
- }'
- lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- # Check for a 64-bit object if we didn't find anything.
- if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
- fi
-
-fi
-
- aix_libpath=$lt_cv_aix_libpath_
-fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
- allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
- aix_libpath=$lt_cv_aix_libpath
-else
- if ${lt_cv_aix_libpath_+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
- lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\([^ ]*\) *$/\1/
- p
- }
- }'
- lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- # Check for a 64-bit object if we didn't find anything.
- if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
- fi
-
-fi
-
- aix_libpath=$lt_cv_aix_libpath_
-fi
-
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
- # We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- else
- # Exported symbols can be pulled into shared objects from archives
- whole_archive_flag_spec='$convenience'
- fi
- archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds=''
- ;;
- m68k)
- archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- ;;
- esac
- ;;
-
- bsdi[45]*)
- export_dynamic_flag_spec=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- case $cc_basename in
- cl*)
- # Native MSVC
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- always_export_symbols=yes
- file_list_spec='@'
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
- # The linker will not automatically build a static lib if we build a DLL.
- # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
- enable_shared_with_static_runtimes=yes
- exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
- export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
- # Don't use ranlib
- old_postinstall_cmds='chmod 644 $oldlib'
- postlink_cmds='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
- ;;
- *)
- # Assume MSVC wrapper
- hardcode_libdir_flag_spec=' '
- allow_undefined_flag=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- old_archive_from_new_cmds='true'
- # FIXME: Should let the user specify the lib program.
- old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
- enable_shared_with_static_runtimes=yes
- ;;
- esac
- ;;
-
- darwin* | rhapsody*)
-
-
- archive_cmds_need_lc=no
- hardcode_direct=no
- hardcode_automatic=yes
- hardcode_shlibpath_var=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
-
- else
- whole_archive_flag_spec=''
- fi
- link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
- case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
- *) _lt_dar_can_shared=$GCC ;;
- esac
- if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=func_echo_all
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-
- else
- ld_shlibs=no
- fi
-
- ;;
-
- dgux*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2.*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=yes
- hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
-
- # Older versions of the 11.00 compiler do not understand -b yet
- # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
-$as_echo_n "checking if $CC understands -b... " >&6; }
-if ${lt_cv_prog_compiler__b+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_prog_compiler__b=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -b"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&5
- $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- lt_cv_prog_compiler__b=yes
- fi
- else
- lt_cv_prog_compiler__b=yes
- fi
- fi
- $RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
-$as_echo "$lt_cv_prog_compiler__b" >&6; }
-
-if test x"$lt_cv_prog_compiler__b" = xyes; then
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-else
- archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-fi
-
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- hardcode_direct=no
- hardcode_shlibpath_var=no
- ;;
- *)
- hardcode_direct=yes
- hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
- # This should be the same for all languages, so no per-tag cache variable.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
-$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
-if ${lt_cv_irix_exported_symbol+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int foo (void) { return 0; }
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- lt_cv_irix_exported_symbol=yes
-else
- lt_cv_irix_exported_symbol=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
-$as_echo "$lt_cv_irix_exported_symbol" >&6; }
- if test "$lt_cv_irix_exported_symbol" = yes; then
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
- fi
- else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
- fi
- archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- inherit_rpath=yes
- link_all_deplibs=yes
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- ;;
-
- newsos6)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_shlibpath_var=no
- ;;
-
- *nto* | *qnx*)
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- hardcode_direct=yes
- hardcode_shlibpath_var=no
- hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
- else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- ld_shlibs=no
- fi
- ;;
-
- os2*)
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_minus_L=yes
- allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- hardcode_libdir_separator=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- else
- allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- hardcode_libdir_flag_spec='-rpath $libdir'
- fi
- archive_cmds_need_lc='no'
- hardcode_libdir_separator=:
- ;;
-
- solaris*)
- no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
- wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
- ;;
- *)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- ;;
- esac
- fi
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_shlibpath_var=no
- case $host_os in
- solaris2.[0-5] | solaris2.[0-5].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- link_all_deplibs=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_direct=yes
- hardcode_minus_L=yes
- hardcode_shlibpath_var=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- reload_cmds='$CC -r -o $output$reload_objs'
- hardcode_direct=no
- ;;
- motorola)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- hardcode_shlibpath_var=no
- ;;
-
- sysv4.3*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- export_dynamic_flag_spec='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
- archive_cmds_need_lc=no
- hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
- hardcode_libdir_separator=':'
- link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-L$libdir'
- hardcode_shlibpath_var=no
- ;;
-
- *)
- ld_shlibs=no
- ;;
- esac
-
- if test x$host_vendor = xsni; then
- case $host in
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- ;;
- esac
- fi
- fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
-$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
-
-with_gnu_ld=$with_gnu_ld
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
- # Assume -lc should be added
- archive_cmds_need_lc=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $archive_cmds in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-if ${lt_cv_archive_cmds_need_lc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- $RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
- (eval $ac_compile) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$lt_prog_compiler_wl
- pic_flag=$lt_prog_compiler_pic
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$allow_undefined_flag
- allow_undefined_flag=
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
- (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
- then
- lt_cv_archive_cmds_need_lc=no
- else
- lt_cv_archive_cmds_need_lc=yes
- fi
- allow_undefined_flag=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
-$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
- archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
- ;;
- esac
- fi
- ;;
-esac
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
- case $lt_search_path_spec in
- *\;*)
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
- ;;
- *)
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
- ;;
- esac
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[lt_foo]++; }
- if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
- # AWK program above erroneously prepends '/' to C:/dos/paths
- # for these hosts.
- case $host_os in
- mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([A-Za-z]:\),\1,g'` ;;
- esac
- sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[4-9]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[01] | aix4.[01].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- case $host_cpu in
- powerpc)
- # Since July 2007 AmigaOS4 officially supports .so libraries.
- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- ;;
- m68k)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
- esac
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[45]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$cc_basename in
- yes,*)
- # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname~
- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
- fi'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
- ;;
- mingw* | cegcc*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- ;;
-
- *,cl*)
- # Native MSVC
- libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
-
- case $build_os in
- mingw*)
- sys_lib_search_path_spec=
- lt_save_ifs=$IFS
- IFS=';'
- for lt_path in $LIB
- do
- IFS=$lt_save_ifs
- # Let DOS variable expansion print the short 8.3 style file name.
- lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
- sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
- done
- IFS=$lt_save_ifs
- # Convert to MSYS style.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
- ;;
- cygwin*)
- # Convert to unix form, then to dos form, then back to unix form
- # but this time dos style (no spaces!) so that the unix form looks
- # like /cygdrive/c/PROGRA~1:/cygdr...
- sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
- sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
- sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- ;;
- *)
- sys_lib_search_path_spec="$LIB"
- if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
- # It is most probably a Windows format PATH.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # FIXME: find the short name or the path components, as spaces are
- # common. (e.g. "Program Files" -> "PROGRA~1")
- ;;
- esac
-
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
- dynamic_linker='Win32 link.exe'
- ;;
-
- *)
- # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
- dynamic_linker='Win32 ld.exe'
- ;;
- esac
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[23].*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2.*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[01]* | freebsdelf3.[01]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
- freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-haiku*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
- postinstall_cmds='chmod 555 $lib'
- # or fails outright, so override atomically:
- install_override_mode=555
- ;;
-
-interix[3-9]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux # correct to gnu/linux during the next big refactor
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
-
- # Some binutils ld are patched to set DT_RUNPATH
- if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- lt_cv_shlibpath_overrides_runpath=no
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
- LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
- lt_cv_shlibpath_overrides_runpath=yes
-fi
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
-
-fi
-
- shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
-
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-*nto* | *qnx*)
- version_type=qnx
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='ldqnx.so'
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-tpf*)
- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-uts4*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" ||
- test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
-
- # We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
- # Linking always hardcodes the temporary library directory.
- hardcode_action=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- hardcode_action=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- hardcode_action=unsupported
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
-$as_echo "$hardcode_action" >&6; }
-
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-
-
-
-
-
-
- if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dl_dlopen=yes
-else
- ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
-
-fi
-
- ;;
-
- *)
- ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
-if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
-$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if ${ac_cv_lib_dld_shl_load+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dld_shl_load=yes
-else
- ac_cv_lib_dld_shl_load=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
- ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
-if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if ${ac_cv_lib_dl_dlopen+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dl_dlopen=yes
-else
- ac_cv_lib_dl_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if ${ac_cv_lib_svld_dlopen+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_svld_dlopen=yes
-else
- ac_cv_lib_svld_dlopen=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
-$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if ${ac_cv_lib_dld_dld_link+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_dld_dld_link=yes
-else
- ac_cv_lib_dld_dld_link=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
-
-fi
-
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if ${lt_cv_dlopen_self+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else
- {
- if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- else puts (dlerror ());
- }
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- return status;
-}
-_LT_EOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
-$as_echo "$lt_cv_dlopen_self" >&6; }
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if ${lt_cv_dlopen_self_static+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- lt_cv_dlopen_self_static=cross
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
-#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else
- {
- if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- else puts (dlerror ());
- }
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- return status;
-}
-_LT_EOF
- if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
- (eval $ac_link) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&5 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
- x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
- esac
- else :
- # compilation failed
- lt_cv_dlopen_self_static=no
- fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
-$as_echo "$lt_cv_dlopen_self_static" >&6; }
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-striplib=
-old_striplib=
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- ;;
- *)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- ;;
- esac
-fi
-
-
-
-
-
-
-
-
-
-
-
-
- # Report which library types will actually be built
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
-
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
- aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-
-
-
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- ac_config_commands="$ac_config_commands libtool"
-
-
-
-
-# Only expand once:
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_ac_ct_CC+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "no acceptable C compiler found in \$PATH
-See \`config.log' for more details" "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- fi
- rm -f conftest.er1 conftest.err
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if ${ac_cv_c_compiler_gnu+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if ${ac_cv_prog_cc_g+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if ${ac_cv_prog_cc_c89+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdarg.h>
-#include <stdio.h>
-struct stat;
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC" am_compiler_list=
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
-$as_echo_n "checking dependency style of $depcc... " >&6; }
-if ${am_cv_CC_dependencies_compiler_type+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named 'D' -- because '-MD' means "put the output
- # in D".
- rm -rf conftest.dir
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
- # We will build objects and dependencies in a subdirectory because
- # it helps to detect inapplicable dependency modes. For instance
- # both Tru64's cc and ICC support -MD to output dependencies as a
- # side effect of compilation, but ICC will put the dependencies in
- # the current directory while Tru64 will put them in the object
- # directory.
- mkdir sub
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- am__universal=false
- case " $depcc " in #(
- *\ -arch\ *\ -arch\ *) am__universal=true ;;
- esac
-
- for depmode in $am_compiler_list; do
- # Setup a source with many dependencies, because some compilers
- # like to wrap large dependency lists on column 80 (with \), and
- # we should not choose a depcomp mode which is confused by this.
- #
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- : > sub/conftest.c
- for i in 1 2 3 4 5 6; do
- echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
- # Solaris 10 /bin/sh.
- echo '/* dummy */' > sub/conftst$i.h
- done
- echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
- # We check with '-c' and '-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle '-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs.
- am__obj=sub/conftest.${OBJEXT-o}
- am__minus_obj="-o $am__obj"
- case $depmode in
- gcc)
- # This depmode causes a compiler race in universal mode.
- test "$am__universal" = false || continue
- ;;
- nosideeffect)
- # After this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested.
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- msvc7 | msvc7msys | msvisualcpp | msvcmsys)
- # This compiler won't grok '-c -o', but also, the minuso test has
- # not run yet. These depmodes are late enough in the game, and
- # so weak that their functioning should not be impacted.
- am__obj=conftest.${OBJEXT-o}
- am__minus_obj=
- ;;
- none) break ;;
- esac
- if depmode=$depmode \
- source=sub/conftest.c object=$am__obj \
- depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
- $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
- >/dev/null 2>conftest.err &&
- grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
- grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
- grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- # icc doesn't choke on unknown options, it will just issue warnings
- # or remarks (even with -Werror). So we grep stderr for any message
- # that says an option was ignored or not supported.
- # When given -MP, icc 7.0 and 7.1 complain thusly:
- # icc: Command line warning: ignoring option '-M'; no argument required
- # The diagnosis changed in icc 8.0:
- # icc: Command line remark: option '-MP' not supported
- if (grep 'ignoring option' conftest.err ||
- grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
-$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
-CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
- if
- test "x$enable_dependency_tracking" != xno \
- && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
- am__fastdepCC_TRUE=
- am__fastdepCC_FALSE='#'
-else
- am__fastdepCC_TRUE='#'
- am__fastdepCC_FALSE=
-fi
-
-
-ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
-if test "x$ac_cv_type_size_t" = xyes; then :
-
-else
-
-cat >>confdefs.h <<_ACEOF
-#define size_t unsigned int
-_ACEOF
-
-fi
-
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments. Useless!
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
-$as_echo_n "checking for working alloca.h... " >&6; }
-if ${ac_cv_working_alloca_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <alloca.h>
-int
-main ()
-{
-char *p = (char *) alloca (2 * sizeof (int));
- if (p) return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_working_alloca_h=yes
-else
- ac_cv_working_alloca_h=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
-$as_echo "$ac_cv_working_alloca_h" >&6; }
-if test $ac_cv_working_alloca_h = yes; then
-
-$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
-$as_echo_n "checking for alloca... " >&6; }
-if ${ac_cv_func_alloca_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-# else
-# ifdef HAVE_ALLOCA_H
-# include <alloca.h>
-# else
-# ifdef _AIX
- #pragma alloca
-# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
-void *alloca (size_t);
-# endif
-# endif
-# endif
-# endif
-#endif
-
-int
-main ()
-{
-char *p = (char *) alloca (1);
- if (p) return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_func_alloca_works=yes
-else
- ac_cv_func_alloca_works=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
-$as_echo "$ac_cv_func_alloca_works" >&6; }
-
-if test $ac_cv_func_alloca_works = yes; then
-
-$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
-
-else
- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
-# that cause trouble. Some versions do not even contain alloca or
-# contain a buggy version. If you still want to use their alloca,
-# use ar to extract alloca.o from them instead of compiling alloca.c.
-
-ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
-
-$as_echo "#define C_ALLOCA 1" >>confdefs.h
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
-$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
-if ${ac_cv_os_cray+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#if defined CRAY && ! defined CRAY2
-webecray
-#else
-wenotbecray
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "webecray" >/dev/null 2>&1; then :
- ac_cv_os_cray=yes
-else
- ac_cv_os_cray=no
-fi
-rm -f conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
-$as_echo "$ac_cv_os_cray" >&6; }
-if test $ac_cv_os_cray = yes; then
- for ac_func in _getb67 GETB67 getb67; do
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-
-cat >>confdefs.h <<_ACEOF
-#define CRAY_STACKSEG_END $ac_func
-_ACEOF
-
- break
-fi
-
- done
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
-$as_echo_n "checking stack direction for C alloca... " >&6; }
-if ${ac_cv_c_stack_direction+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- ac_cv_c_stack_direction=0
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$ac_includes_default
-int
-find_stack_direction (int *addr, int depth)
-{
- int dir, dummy = 0;
- if (! addr)
- addr = &dummy;
- *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
- dir = depth ? find_stack_direction (addr, depth - 1) : 0;
- return dir + dummy;
-}
-
-int
-main (int argc, char **argv)
-{
- return find_stack_direction (0, argc + !argv + 20) < 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_c_stack_direction=1
-else
- ac_cv_c_stack_direction=-1
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
-$as_echo "$ac_cv_c_stack_direction" >&6; }
-cat >>confdefs.h <<_ACEOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-_ACEOF
-
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
-$as_echo_n "checking for library containing strerror... " >&6; }
-if ${ac_cv_search_strerror+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strerror ();
-int
-main ()
-{
-return strerror ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' cposix; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_strerror=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if ${ac_cv_search_strerror+:} false; then :
- break
-fi
-done
-if ${ac_cv_search_strerror+:} false; then :
-
-else
- ac_cv_search_strerror=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
-$as_echo "$ac_cv_search_strerror" >&6; }
-ac_res=$ac_cv_search_strerror
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
-$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-if ${ac_cv_c_const+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
-#ifndef __cplusplus
- /* Ultrix mips cc rejects this sort of thing. */
- typedef int charset[2];
- const charset cs = { 0, 0 };
- /* SunOS 4.1.1 cc rejects this. */
- char const *const *pcpcc;
- char **ppc;
- /* NEC SVR4.0.2 mips cc rejects this. */
- struct point {int x, y;};
- static struct point const zero = {0,0};
- /* AIX XL C 1.02.0.0 rejects this.
- It does not let you subtract one const X* pointer from another in
- an arm of an if-expression whose if-part is not a constant
- expression */
- const char *g = "string";
- pcpcc = &g + (g ? g-g : 0);
- /* HPUX 7.0 cc rejects these. */
- ++pcpcc;
- ppc = (char**) pcpcc;
- pcpcc = (char const *const *) ppc;
- { /* SCO 3.2v4 cc rejects this sort of thing. */
- char tx;
- char *t = &tx;
- char const *s = 0 ? (char *) 0 : (char const *) 0;
-
- *t++ = 0;
- if (s) return 0;
- }
- { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
- int x[] = {25, 17};
- const int *foo = &x[0];
- ++foo;
- }
- { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
- typedef const int *iptr;
- iptr p = 0;
- ++p;
- }
- { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
- "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
- struct s { int j; const int *ap[3]; } bx;
- struct s *b = &bx; b->j = 5;
- }
- { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
- const int foo = 10;
- if (!foo) return 0;
- }
- return !cs[0] && !zero.x;
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_c_const=yes
-else
- ac_cv_c_const=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
-$as_echo "$ac_cv_c_const" >&6; }
-if test $ac_cv_c_const = no; then
-
-$as_echo "#define const /**/" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
-$as_echo_n "checking for inline... " >&6; }
-if ${ac_cv_c_inline+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_c_inline=no
-for ac_kw in inline __inline__ __inline; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifndef __cplusplus
-typedef int foo_t;
-static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_c_inline=$ac_kw
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- test "$ac_cv_c_inline" != no && break
-done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
-$as_echo "$ac_cv_c_inline" >&6; }
-
-case $ac_cv_c_inline in
- inline | yes) ;;
- *)
- case $ac_cv_c_inline in
- no) ac_val=;;
- *) ac_val=$ac_cv_c_inline;;
- esac
- cat >>confdefs.h <<_ACEOF
-#ifndef __cplusplus
-#define inline $ac_val
-#endif
-_ACEOF
- ;;
-esac
-
-for ac_prog in flex lex
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_LEX+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$LEX"; then
- ac_cv_prog_LEX="$LEX" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_LEX="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-LEX=$ac_cv_prog_LEX
-if test -n "$LEX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5
-$as_echo "$LEX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$LEX" && break
-done
-test -n "$LEX" || LEX=":"
-
-if test "x$LEX" != "x:"; then
- cat >conftest.l <<_ACEOF
-%%
-a { ECHO; }
-b { REJECT; }
-c { yymore (); }
-d { yyless (1); }
-e { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */
- yyless ((input () != 0)); }
-f { unput (yytext[0]); }
-. { BEGIN INITIAL; }
-%%
-#ifdef YYTEXT_POINTER
-extern char *yytext;
-#endif
-int
-main (void)
-{
- return ! yylex () + ! yywrap ();
-}
-_ACEOF
-{ { ac_try="$LEX conftest.l"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$LEX conftest.l") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5
-$as_echo_n "checking lex output file root... " >&6; }
-if ${ac_cv_prog_lex_root+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
-if test -f lex.yy.c; then
- ac_cv_prog_lex_root=lex.yy
-elif test -f lexyy.c; then
- ac_cv_prog_lex_root=lexyy
-else
- as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5
-$as_echo "$ac_cv_prog_lex_root" >&6; }
-LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
-
-if test -z "${LEXLIB+set}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5
-$as_echo_n "checking lex library... " >&6; }
-if ${ac_cv_lib_lex+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- ac_save_LIBS=$LIBS
- ac_cv_lib_lex='none needed'
- for ac_lib in '' -lfl -ll; do
- LIBS="$ac_lib $ac_save_LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-`cat $LEX_OUTPUT_ROOT.c`
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_lex=$ac_lib
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- test "$ac_cv_lib_lex" != 'none needed' && break
- done
- LIBS=$ac_save_LIBS
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5
-$as_echo "$ac_cv_lib_lex" >&6; }
- test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5
-$as_echo_n "checking whether yytext is a pointer... " >&6; }
-if ${ac_cv_prog_lex_yytext_pointer+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # POSIX says lex can declare yytext either as a pointer or an array; the
-# default is implementation-dependent. Figure out which it is, since
-# not all implementations provide the %pointer and %array declarations.
-ac_cv_prog_lex_yytext_pointer=no
-ac_save_LIBS=$LIBS
-LIBS="$LEXLIB $ac_save_LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- #define YYTEXT_POINTER 1
-`cat $LEX_OUTPUT_ROOT.c`
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_prog_lex_yytext_pointer=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_save_LIBS
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5
-$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; }
-if test $ac_cv_prog_lex_yytext_pointer = yes; then
-
-$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h
-
-fi
-rm -f conftest.l $LEX_OUTPUT_ROOT.c
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if ${ac_cv_header_stdc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_stdc=yes
-else
- ac_cv_header_stdc=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "memchr" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "free" >/dev/null 2>&1; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
- if test "$cross_compiling" = yes; then :
- :
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
- (('a' <= (c) && (c) <= 'i') \
- || ('j' <= (c) && (c) <= 'r') \
- || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
-
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
- int i;
- for (i = 0; i < 256; i++)
- if (XOR (islower (i), ISLOWER (i))
- || toupper (i) != TOUPPER (i))
- return 2;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- ac_cv_header_stdc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
-
-$as_echo "#define STDC_HEADERS 1" >>confdefs.h
-
-fi
-
-for ac_header in limits.h locale.h memory.h stdbool.h stddef.h stdlib.h string.h unistd.h utime.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
-$as_echo_n "checking return type of signal handlers... " >&6; }
-if ${ac_cv_type_signal+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <signal.h>
-
-int
-main ()
-{
-return *(signal (0, 0)) (0) == 1;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_type_signal=int
-else
- ac_cv_type_signal=void
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
-$as_echo "$ac_cv_type_signal" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define RETSIGTYPE $ac_cv_type_signal
-_ACEOF
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether time.h and sys/time.h may both be included" >&5
-$as_echo_n "checking whether time.h and sys/time.h may both be included... " >&6; }
-if ${ac_cv_header_time+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <sys/types.h>
-#include <sys/time.h>
-#include <time.h>
-
-int
-main ()
-{
-if ((struct tm *) 0)
-return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_header_time=yes
-else
- ac_cv_header_time=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_time" >&5
-$as_echo "$ac_cv_header_time" >&6; }
-if test $ac_cv_header_time = yes; then
-
-$as_echo "#define TIME_WITH_SYS_TIME 1" >>confdefs.h
-
-fi
-
-
- for ac_header in utime.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "utime.h" "ac_cv_header_utime_h" "$ac_includes_default"
-if test "x$ac_cv_header_utime_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_UTIME_H 1
-_ACEOF
-
-fi
-
-done
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct utimbuf" >&5
-$as_echo_n "checking for struct utimbuf... " >&6; }
-if ${fu_cv_sys_struct_utimbuf+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#ifdef TIME_WITH_SYS_TIME
-# include <sys/time.h>
-# include <time.h>
-#else
-# ifdef HAVE_SYS_TIME_H
-# include <sys/time.h>
-# else
-# include <time.h>
-# endif
-#endif
-#ifdef HAVE_UTIME_H
-# include <utime.h>
-#endif
-
-int
-main ()
-{
-static struct utimbuf x; x.actime = x.modtime;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- fu_cv_sys_struct_utimbuf=yes
-else
- fu_cv_sys_struct_utimbuf=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $fu_cv_sys_struct_utimbuf" >&5
-$as_echo "$fu_cv_sys_struct_utimbuf" >&6; }
-
- if test $fu_cv_sys_struct_utimbuf = yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_STRUCT_UTIMBUF 1
-_ACEOF
-
- fi
-
-
-
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
- with_gnu_ld=no
-fi
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
-$as_echo_n "checking for ld used by GCC... " >&6; }
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if ${acl_cv_path_LD+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if ${acl_cv_prog_gnu_ld+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- # I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
-$as_echo "$acl_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$acl_cv_prog_gnu_ld
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
-$as_echo_n "checking for shared library run path origin... " >&6; }
-if ${acl_cv_rpath+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
-$as_echo "$acl_cv_rpath" >&6; }
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- # Check whether --enable-rpath was given.
-if test "${enable_rpath+set}" = set; then :
- enableval=$enable_rpath; :
-else
- enable_rpath=yes
-fi
-
-
-
-
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
-$as_echo_n "checking for 64-bit host... " >&6; }
-if ${gl_cv_solaris_64bit+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#ifdef _LP64
-sixtyfour bits
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
- gl_cv_solaris_64bit=yes
-else
- gl_cv_solaris_64bit=no
-fi
-rm -f conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
-$as_echo "$gl_cv_solaris_64bit" >&6; }
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
-
-
-
-
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libiconv-prefix was given.
-if test "${with_libiconv_prefix+set}" = set; then :
- withval=$with_libiconv_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-
-fi
-
- LIBICONV=
- LTLIBICONV=
- INCICONV=
- LIBICONV_PREFIX=
- HAVE_LIBICONV=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='iconv '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$acl_hardcode_direct" = yes; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBICONV; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
- done
- fi
-
-
-
-
-
-
-
-
-
-
-
-
- am_save_CPPFLAGS="$CPPFLAGS"
-
- for element in $INCICONV; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if ${am_cv_func_iconv+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
- if test "$am_cv_func_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
-$as_echo_n "checking for working iconv... " >&6; }
-if ${am_cv_func_iconv_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- if test "$cross_compiling" = yes; then :
- case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- am_cv_func_iconv_works=yes
-else
- am_cv_func_iconv_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- LIBS="$am_save_LIBS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
-$as_echo "$am_cv_func_iconv_works" >&6; }
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
-
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
- fi
- if test "$am_cv_lib_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
- else
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
-
-
-
- if test "$am_cv_func_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv declaration" >&5
-$as_echo_n "checking for iconv declaration... " >&6; }
- if ${am_cv_proto_iconv+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- am_cv_proto_iconv_arg1=""
-else
- am_cv_proto_iconv_arg1="const"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
-fi
-
- am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result:
- $am_cv_proto_iconv" >&5
-$as_echo "
- $am_cv_proto_iconv" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define ICONV_CONST $am_cv_proto_iconv_arg1
-_ACEOF
-
- fi
-
-LIBS="$LIBICONV $LIBS"
-
-for ac_func in dup2 mbrtowc rename setlocale strerror strndup wcrtomb
-do :
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-done
-
-ac_fn_c_check_func "$LINENO" "strtol" "ac_cv_func_strtol"
-if test "x$ac_cv_func_strtol" = xyes; then :
- $as_echo "#define HAVE_STRTOL 1" >>confdefs.h
-
-else
- case " $LIBOBJS " in
- *" strtol.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS strtol.$ac_objext"
- ;;
-esac
-
-fi
-
-ac_fn_c_check_func "$LINENO" "strtoul" "ac_cv_func_strtoul"
-if test "x$ac_cv_func_strtoul" = xyes; then :
- $as_echo "#define HAVE_STRTOUL 1" >>confdefs.h
-
-else
- case " $LIBOBJS " in
- *" strtoul.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS strtoul.$ac_objext"
- ;;
-esac
-
-fi
-
-
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments. Useless!
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
-$as_echo_n "checking for working alloca.h... " >&6; }
-if ${ac_cv_working_alloca_h+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <alloca.h>
-int
-main ()
-{
-char *p = (char *) alloca (2 * sizeof (int));
- if (p) return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_working_alloca_h=yes
-else
- ac_cv_working_alloca_h=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
-$as_echo "$ac_cv_working_alloca_h" >&6; }
-if test $ac_cv_working_alloca_h = yes; then
-
-$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
-$as_echo_n "checking for alloca... " >&6; }
-if ${ac_cv_func_alloca_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-# include <malloc.h>
-# define alloca _alloca
-# else
-# ifdef HAVE_ALLOCA_H
-# include <alloca.h>
-# else
-# ifdef _AIX
- #pragma alloca
-# else
-# ifndef alloca /* predefined by HP cc +Olibcalls */
-void *alloca (size_t);
-# endif
-# endif
-# endif
-# endif
-#endif
-
-int
-main ()
-{
-char *p = (char *) alloca (1);
- if (p) return 0;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_func_alloca_works=yes
-else
- ac_cv_func_alloca_works=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
-$as_echo "$ac_cv_func_alloca_works" >&6; }
-
-if test $ac_cv_func_alloca_works = yes; then
-
-$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
-
-else
- # The SVR3 libPW and SVR4 libucb both contain incompatible functions
-# that cause trouble. Some versions do not even contain alloca or
-# contain a buggy version. If you still want to use their alloca,
-# use ar to extract alloca.o from them instead of compiling alloca.c.
-
-ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
-
-$as_echo "#define C_ALLOCA 1" >>confdefs.h
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
-$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
-if ${ac_cv_os_cray+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#if defined CRAY && ! defined CRAY2
-webecray
-#else
-wenotbecray
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "webecray" >/dev/null 2>&1; then :
- ac_cv_os_cray=yes
-else
- ac_cv_os_cray=no
-fi
-rm -f conftest*
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
-$as_echo "$ac_cv_os_cray" >&6; }
-if test $ac_cv_os_cray = yes; then
- for ac_func in _getb67 GETB67 getb67; do
- as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
-if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
-
-cat >>confdefs.h <<_ACEOF
-#define CRAY_STACKSEG_END $ac_func
-_ACEOF
-
- break
-fi
-
- done
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
-$as_echo_n "checking stack direction for C alloca... " >&6; }
-if ${ac_cv_c_stack_direction+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- ac_cv_c_stack_direction=0
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$ac_includes_default
-int
-find_stack_direction (int *addr, int depth)
-{
- int dir, dummy = 0;
- if (! addr)
- addr = &dummy;
- *addr = addr < &dummy ? 1 : addr == &dummy ? 0 : -1;
- dir = depth ? find_stack_direction (addr, depth - 1) : 0;
- return dir + dummy;
-}
-
-int
-main (int argc, char **argv)
-{
- return find_stack_direction (0, argc + !argv + 20) < 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- ac_cv_c_stack_direction=1
-else
- ac_cv_c_stack_direction=-1
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
-$as_echo "$ac_cv_c_stack_direction" >&6; }
-cat >>confdefs.h <<_ACEOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-_ACEOF
-
-
-fi
-
-for ac_func in vprintf
-do :
- ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf"
-if test "x$ac_cv_func_vprintf" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_VPRINTF 1
-_ACEOF
-
-ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt"
-if test "x$ac_cv_func__doprnt" = xyes; then :
-
-$as_echo "#define HAVE_DOPRNT 1" >>confdefs.h
-
-fi
-
-fi
-done
-
-
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DONE_WORKING_MALLOC_CHECK 1
-_ACEOF
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working malloc" >&5
-$as_echo_n "checking for working malloc... " >&6; }
-if ${jm_cv_func_working_malloc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- jm_cv_func_working_malloc=no
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- char *malloc ();
- int
- main ()
- {
- exit (malloc (0) ? 0 : 1);
- }
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- jm_cv_func_working_malloc=yes
-else
- jm_cv_func_working_malloc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $jm_cv_func_working_malloc" >&5
-$as_echo "$jm_cv_func_working_malloc" >&6; }
- if test $jm_cv_func_working_malloc = no; then
- case " $LIBOBJS " in
- *" malloc.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
- ;;
-esac
-
-
-cat >>confdefs.h <<_ACEOF
-#define malloc rpl_malloc
-_ACEOF
-
- fi
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define HAVE_DONE_WORKING_REALLOC_CHECK 1
-_ACEOF
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working realloc" >&5
-$as_echo_n "checking for working realloc... " >&6; }
-if ${jm_cv_func_working_realloc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test "$cross_compiling" = yes; then :
- jm_cv_func_working_realloc=no
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
- char *realloc ();
- int
- main ()
- {
- exit (realloc (0, 0) ? 0 : 1);
- }
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- jm_cv_func_working_realloc=yes
-else
- jm_cv_func_working_realloc=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $jm_cv_func_working_realloc" >&5
-$as_echo "$jm_cv_func_working_realloc" >&6; }
- if test $jm_cv_func_working_realloc = no; then
- case " $LIBOBJS " in
- *" realloc.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS realloc.$ac_objext"
- ;;
-esac
-
-
-cat >>confdefs.h <<_ACEOF
-#define realloc rpl_realloc
-_ACEOF
-
- fi
-
-
-
-
- for ac_header in langinfo.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "langinfo.h" "ac_cv_header_langinfo_h" "$ac_includes_default"
-if test "x$ac_cv_header_langinfo_h" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LANGINFO_H 1
-_ACEOF
-
-fi
-
-done
-
- for ac_func in nl_langinfo
-do :
- ac_fn_c_check_func "$LINENO" "nl_langinfo" "ac_cv_func_nl_langinfo"
-if test "x$ac_cv_func_nl_langinfo" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_NL_LANGINFO 1
-_ACEOF
-
-fi
-done
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5
-$as_echo_n "checking for nl_langinfo and CODESET... " >&6; }
-if ${jm_cv_langinfo_codeset+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <langinfo.h>
-int
-main ()
-{
-char* cs = nl_langinfo(CODESET);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- jm_cv_langinfo_codeset=yes
-else
- jm_cv_langinfo_codeset=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $jm_cv_langinfo_codeset" >&5
-$as_echo "$jm_cv_langinfo_codeset" >&6; }
- if test $jm_cv_langinfo_codeset = yes; then
-
-$as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h
-
- fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C Library 2.1 or newer" >&5
-$as_echo_n "checking whether we are using the GNU C Library 2.1 or newer... " >&6; }
-if ${ac_cv_gnu_library_2_1+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <features.h>
-#ifdef __GNU_LIBRARY__
- #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
- Lucky GNU user
- #endif
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "Lucky GNU user" >/dev/null 2>&1; then :
- ac_cv_gnu_library_2_1=yes
-else
- ac_cv_gnu_library_2_1=no
-fi
-rm -f conftest*
-
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_gnu_library_2_1" >&5
-$as_echo "$ac_cv_gnu_library_2_1" >&6; }
-
- GLIBC21="$ac_cv_gnu_library_2_1"
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if malloc debugging is wanted" >&5
-$as_echo_n "checking if malloc debugging is wanted... " >&6; }
-
-# Check whether --with-dmalloc was given.
-if test "${with_dmalloc+set}" = set; then :
- withval=$with_dmalloc; if test "$withval" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-$as_echo "#define WITH_DMALLOC 1" >>confdefs.h
-
- LIBS="$LIBS -ldmalloc"
- LDFLAGS="$LDFLAGS -g"
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
-
-
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
-$as_echo_n "checking whether NLS is requested... " >&6; }
- # Check whether --enable-nls was given.
-if test "${enable_nls+set}" = set; then :
- enableval=$enable_nls; USE_NLS=$enableval
-else
- USE_NLS=yes
-fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
-
-
-
-
- GETTEXT_MACRO_VERSION=0.18
-
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgfmt", so it can be a program name with args.
-set dummy msgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGFMT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$MSGFMT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
- ;;
-esac
-fi
-MSGFMT="$ac_cv_path_MSGFMT"
-if test "$MSGFMT" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
-$as_echo "$MSGFMT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- # Extract the first word of "gmsgfmt", so it can be a program name with args.
-set dummy gmsgfmt; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_GMSGFMT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $GMSGFMT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
- ;;
-esac
-fi
-GMSGFMT=$ac_cv_path_GMSGFMT
-if test -n "$GMSGFMT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
-$as_echo "$GMSGFMT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "xgettext", so it can be a program name with args.
-set dummy xgettext; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_XGETTEXT+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$XGETTEXT" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
- ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
- ;;
-esac
-fi
-XGETTEXT="$ac_cv_path_XGETTEXT"
-if test "$XGETTEXT" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
-$as_echo "$XGETTEXT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- rm -f messages.po
-
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-
-
-
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "msgmerge", so it can be a program name with args.
-set dummy msgmerge; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_MSGMERGE+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case "$MSGMERGE" in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&5
- if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
- ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
- test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
- ;;
-esac
-fi
-MSGMERGE="$ac_cv_path_MSGMERGE"
-if test "$MSGMERGE" != ":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
-$as_echo "$MSGMERGE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$localedir" || localedir='${datadir}/locale'
-
-
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
-
-
- ac_config_commands="$ac_config_commands po-directories"
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
-$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
-if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <CoreFoundation/CFPreferences.h>
-int
-main ()
-{
-CFPreferencesCopyAppValue(NULL, NULL)
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gt_cv_func_CFPreferencesCopyAppValue=yes
-else
- gt_cv_func_CFPreferencesCopyAppValue=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
-$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
-
-$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
-
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
-$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
-if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <CoreFoundation/CFLocale.h>
-int
-main ()
-{
-CFLocaleCopyCurrent();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- gt_cv_func_CFLocaleCopyCurrent=yes
-else
- gt_cv_func_CFLocaleCopyCurrent=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$gt_save_LIBS"
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
-$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
- if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
-
-$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
-
- fi
- INTL_MACOSX_LIBS=
- if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
- INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
- fi
-
-
-
-
-
-
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
-
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
-$as_echo_n "checking for GNU gettext in libc... " >&6; }
-if eval \${$gt_func_gnugettext_libc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$gt_func_gnugettext_libc=yes"
-else
- eval "$gt_func_gnugettext_libc=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$gt_func_gnugettext_libc
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
-
-
-
-
-
- am_save_CPPFLAGS="$CPPFLAGS"
-
- for element in $INCICONV; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
-$as_echo_n "checking for iconv... " >&6; }
-if ${am_cv_func_iconv+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <stdlib.h>
-#include <iconv.h>
-int
-main ()
-{
-iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- am_cv_lib_iconv=yes
- am_cv_func_iconv=yes
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- LIBS="$am_save_LIBS"
- fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
-$as_echo "$am_cv_func_iconv" >&6; }
- if test "$am_cv_func_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
-$as_echo_n "checking for working iconv... " >&6; }
-if ${am_cv_func_iconv_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- if test "$cross_compiling" = yes; then :
- case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- am_cv_func_iconv_works=yes
-else
- am_cv_func_iconv_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- LIBS="$am_save_LIBS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
-$as_echo "$am_cv_func_iconv_works" >&6; }
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
-
-$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
- fi
- if test "$am_cv_lib_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
-$as_echo_n "checking how to link with libiconv... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
-$as_echo "$LIBICONV" >&6; }
- else
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
-
-
-
-
-
-
-
-
-
-
-
- use_additional=yes
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
-
-# Check whether --with-libintl-prefix was given.
-if test "${with_libintl_prefix+set}" = set; then :
- withval=$with_libintl_prefix;
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
-
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
-
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-
-fi
-
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- LIBINTL_PREFIX=
- HAVE_LIBINTL=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='intl '
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
- else
- :
- fi
- else
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- if test "$acl_hardcode_direct" = yes; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
- fi
- fi
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INCINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- if test -n "$found_la"; then
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIBINTL; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
- ;;
- esac
- done
- fi
- else
- LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- else
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- for found_dir in $ltrpathdirs; do
- LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
- done
- fi
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
-$as_echo_n "checking for GNU gettext in libintl... " >&6; }
-if eval \${$gt_func_gnugettext_libintl+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$gt_func_gnugettext_libintl=yes"
-else
- eval "$gt_func_gnugettext_libintl=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);
-int
-main ()
-{
-bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"
-fi
-eval ac_res=\$$gt_func_gnugettext_libintl
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- fi
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
-
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
-
-$as_echo "#define ENABLE_NLS 1" >>confdefs.h
-
- else
- USE_NLS=no
- fi
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
-$as_echo_n "checking whether to use NLS... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
-$as_echo "$USE_NLS" >&6; }
- if test "$USE_NLS" = "yes"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
-$as_echo_n "checking where the gettext function comes from... " >&6; }
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
-$as_echo "$gt_source" >&6; }
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
-$as_echo_n "checking how to link with libintl... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
-$as_echo "$LIBINTL" >&6; }
-
- for element in $INCINTL; do
- haveit=
- for x in $CPPFLAGS; do
-
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- eval x=\"$x\"
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
- fi
- done
-
- fi
-
-
-$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
-
-
-$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
-
- fi
-
- POSUB=po
- fi
-
-
-
- INTLLIBS="$LIBINTL"
-
-
-
-
-
-
-
-
-
-ac_config_files="$ac_config_files Makefile cleaner.h contrib/Makefile doc/Makefile lib/Makefile po/Makefile.in src/Makefile tests/Makefile tests/setup.py"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- if test "x$cache_file" != "x/dev/null"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- if test ! -f "$cache_file" || test -h "$cache_file"; then
- cat confcache >"$cache_file"
- else
- case $cache_file in #(
- */* | ?:*)
- mv -f confcache "$cache_file"$$ &&
- mv -f "$cache_file"$$ "$cache_file" ;; #(
- *)
- mv -f confcache "$cache_file" ;;
- esac
- fi
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
-$as_echo_n "checking that generated files are newer than configure... " >&6; }
- if test -n "$am_sleep_pid"; then
- # Hide warnings about reused PIDs.
- wait $am_sleep_pid 2>/dev/null
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
-$as_echo "done" >&6; }
- if test -n "$EXEEXT"; then
- am__EXEEXT_TRUE=
- am__EXEEXT_FALSE='#'
-else
- am__EXEEXT_TRUE='#'
- am__EXEEXT_FALSE=
-fi
-
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- as_fn_error $? "conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." "$LINENO" 5
-fi
-
-: "${CONFIG_STATUS=./config.status}"
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-as_myself=
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error STATUS ERROR [LINENO LOG_FD]
-# ----------------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with STATUS, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$1; test $as_status -eq 0 && as_status=1
- if test "$4"; then
- as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
- fi
- $as_echo "$as_me: error: $2" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -pR'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -pR'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -pR'
- fi
-else
- as_ln_s='cp -pR'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-
-# as_fn_executable_p FILE
-# -----------------------
-# Test if FILE is an executable regular file.
-as_fn_executable_p ()
-{
- test -f "$1" && test -x "$1"
-} # as_fn_executable_p
-as_test_x='test -x'
-as_executable_p=as_fn_executable_p
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by recode $as_me 3.7-beta2, which was
-generated by GNU Autoconf 2.69. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-config_commands="$ac_config_commands"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- --config print configuration, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
-ac_cs_version="\\
-recode config.status 3.7-beta2
-configured by $0, generated by GNU Autoconf 2.69,
- with options \\"\$ac_cs_config\\"
-
-Copyright (C) 2012 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=?*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- --*=)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --config | --confi | --conf | --con | --co | --c )
- $as_echo "$ac_cs_config"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- '') as_fn_error $? "missing file argument" ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append CONFIG_HEADERS " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
- --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error $? "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
-
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
-macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
-enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
-enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
-pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
-enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
-SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
-ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
-PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
-host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
-host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
-host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
-build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
-build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
-build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
-SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
-Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
-GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
-EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
-FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
-LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
-NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
-LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
-max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
-ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
-exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
-lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
-lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
-lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
-lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
-lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
-reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
-reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
-OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
-deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
-file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
-file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
-want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
-DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
-sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
-AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
-AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
-archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
-STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
-RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
-old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
-lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
-CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
-CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
-compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
-GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
-nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
-lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
-objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
-MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
-lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
-lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
-need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
-MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
-DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
-NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
-LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
-OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
-OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
-libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
-shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
-extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
-enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
-export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
-whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
-compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
-old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
-old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
-archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
-archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
-module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
-with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
-allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
-no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
-hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
-hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
-hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
-hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
-hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
-inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
-link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
-always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
-export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
-exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
-include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
-prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
-postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
-file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
-variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
-need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
-need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
-version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
-runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
-shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
-libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
-library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
-soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
-install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
-postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
-postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
-finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
-finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
-hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
-sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
-hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
-enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
-enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
-old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
-striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
-
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
-
-# Quote evaled strings.
-for var in SHELL \
-ECHO \
-PATH_SEPARATOR \
-SED \
-GREP \
-EGREP \
-FGREP \
-LD \
-NM \
-LN_S \
-lt_SP2NL \
-lt_NL2SP \
-reload_flag \
-OBJDUMP \
-deplibs_check_method \
-file_magic_cmd \
-file_magic_glob \
-want_nocaseglob \
-DLLTOOL \
-sharedlib_from_linklib_cmd \
-AR \
-AR_FLAGS \
-archiver_list_spec \
-STRIP \
-RANLIB \
-CC \
-CFLAGS \
-compiler \
-lt_cv_sys_global_symbol_pipe \
-lt_cv_sys_global_symbol_to_cdecl \
-lt_cv_sys_global_symbol_to_c_name_address \
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
-nm_file_list_spec \
-lt_prog_compiler_no_builtin_flag \
-lt_prog_compiler_pic \
-lt_prog_compiler_wl \
-lt_prog_compiler_static \
-lt_cv_prog_compiler_c_o \
-need_locks \
-MANIFEST_TOOL \
-DSYMUTIL \
-NMEDIT \
-LIPO \
-OTOOL \
-OTOOL64 \
-shrext_cmds \
-export_dynamic_flag_spec \
-whole_archive_flag_spec \
-compiler_needs_object \
-with_gnu_ld \
-allow_undefined_flag \
-no_undefined_flag \
-hardcode_libdir_flag_spec \
-hardcode_libdir_separator \
-exclude_expsyms \
-include_expsyms \
-file_list_spec \
-variables_saved_for_relink \
-libname_spec \
-library_names_spec \
-soname_spec \
-install_override_mode \
-finish_eval \
-old_striplib \
-striplib; do
- case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
- *[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
-
-# Double-quote double-evaled strings.
-for var in reload_cmds \
-old_postinstall_cmds \
-old_postuninstall_cmds \
-old_archive_cmds \
-extract_expsyms_cmds \
-old_archive_from_new_cmds \
-old_archive_from_expsyms_cmds \
-archive_cmds \
-archive_expsym_cmds \
-module_cmds \
-module_expsym_cmds \
-export_symbols_cmds \
-prelink_cmds \
-postlink_cmds \
-postinstall_cmds \
-postuninstall_cmds \
-finish_cmds \
-sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
- case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
- *[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
-
-ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-
- PACKAGE='$PACKAGE'
- VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
- RM='$RM'
- ofile='$ofile'
-
-
-
-# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
-
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
- "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
- "cleaner.h") CONFIG_FILES="$CONFIG_FILES cleaner.h" ;;
- "contrib/Makefile") CONFIG_FILES="$CONFIG_FILES contrib/Makefile" ;;
- "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
- "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
- "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
- "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
- "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
- "tests/setup.py") CONFIG_FILES="$CONFIG_FILES tests/setup.py" ;;
-
- *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
- test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp= ac_tmp=
- trap 'exit_status=$?
- : "${ac_tmp:=$tmp}"
- { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
-ac_tmp=$tmp
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\)..*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\)..*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
- N
- s/\n//
-}
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = "\a"
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
- || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
-# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
-h
-s///
-s/^/:/
-s/[ ]*$/:/
-s/:\$(srcdir):/:/g
-s/:\${srcdir}:/:/g
-s/:@srcdir@:/:/g
-s/^:*//
-s/:*$//
-x
-s/\(=[ ]*\).*/\1/
-G
-s/\n//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
- ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_tt"; then
- break
- elif $ac_last_try; then
- as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any. Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[ ]*#[ ]*define[ ][ ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- for (key in D) D_is_set[key] = 1
- FS = "\a"
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
- line = \$ 0
- split(line, arg, " ")
- if (arg[1] == "#") {
- defundef = arg[2]
- mac1 = arg[3]
- } else {
- defundef = substr(arg[1], 2)
- mac1 = arg[2]
- }
- split(mac1, mac2, "(") #)
- macro = mac2[1]
- prefix = substr(line, 1, index(line, defundef) - 1)
- if (D_is_set[macro]) {
- # Preserve the white space surrounding the "#".
- print prefix "define", macro P[macro] D[macro]
- next
- } else {
- # Replace #undef with comments. This is necessary, for example,
- # in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
- if (defundef == "undef") {
- print "/*", prefix defundef, macro, "*/"
- next
- }
- }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$ac_tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$ac_tmp/stdin" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
- case $INSTALL in
- [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
- *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
- esac
- ac_MKDIR_P=$MKDIR_P
- case $MKDIR_P in
- [\\/$]* | ?:[\\/]* ) ;;
- */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
- esac
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
- >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
- "$ac_tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined" >&2;}
-
- rm -f "$ac_tmp/stdin"
- case $ac_file in
- -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
- *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
- esac \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
- if test x"$ac_file" != x-; then
- {
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
- } >"$ac_tmp/config.h" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f "$ac_file"
- mv "$ac_tmp/config.h" "$ac_file" \
- || as_fn_error $? "could not create $ac_file" "$LINENO" 5
- fi
- else
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error $? "could not create -" "$LINENO" 5
- fi
-# Compute "$ac_file"'s index in $config_headers.
-_am_arg="$ac_file"
-_am_stamp_count=1
-for _am_header in $config_headers :; do
- case $_am_header in
- $_am_arg | $_am_arg:* )
- break ;;
- * )
- _am_stamp_count=`expr $_am_stamp_count + 1` ;;
- esac
-done
-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$_am_arg" : 'X\(//\)[^/]' \| \
- X"$_am_arg" : 'X\(//\)$' \| \
- X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$_am_arg" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
-
- :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
- esac
-
-
- case $ac_file$ac_mode in
- "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Older Autoconf quotes --file arguments for eval, but not when files
- # are listed without --file. Let's play safe and only enable the eval
- # if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
- shift
- for mf
- do
- # Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
- # limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
- done
-}
- ;;
- "libtool":C)
-
- # See if we are running on zsh, and set the options which allow our
- # commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
-
- cfgfile="${ofile}T"
- trap "$RM \"$cfgfile\"; exit 1" 1 2 15
- $RM "$cfgfile"
-
- cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-
-# The names of the tagged configurations supported by this script.
-available_tags=""
-
-# ### BEGIN LIBTOOL CONFIG
-
-# Which release of libtool.m4 was used?
-macro_version=$macro_version
-macro_revision=$macro_revision
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# What type of objects to build.
-pic_mode=$pic_mode
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# An echo program that protects backslashes.
-ECHO=$lt_ECHO
-
-# The PATH separator for the build system.
-PATH_SEPARATOR=$lt_PATH_SEPARATOR
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="\$SED -e 1s/^X//"
-
-# A grep program that handles long lines.
-GREP=$lt_GREP
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# A literal string matcher.
-FGREP=$lt_FGREP
-
-# A BSD- or MS-compatible name lister.
-NM=$lt_NM
-
-# Whether we need soft or hard links.
-LN_S=$lt_LN_S
-
-# What is the maximum length of a command?
-max_cmd_len=$max_cmd_len
-
-# Object file suffix (normally "o").
-objext=$ac_objext
-
-# Executable file suffix (normally "").
-exeext=$exeext
-
-# whether the shell understands "unset".
-lt_unset=$lt_unset
-
-# turn spaces into newlines.
-SP2NL=$lt_lt_SP2NL
-
-# turn newlines into spaces.
-NL2SP=$lt_lt_NL2SP
-
-# convert \$build file names to \$host format.
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-
-# convert \$build files to toolchain format.
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-
-# An object symbol dumper.
-OBJDUMP=$lt_OBJDUMP
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method = "file_magic".
-file_magic_cmd=$lt_file_magic_cmd
-
-# How to find potential files when deplibs_check_method = "file_magic".
-file_magic_glob=$lt_file_magic_glob
-
-# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
-want_nocaseglob=$lt_want_nocaseglob
-
-# DLL creation program.
-DLLTOOL=$lt_DLLTOOL
-
-# Command to associate shared and link libraries.
-sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
-
-# The archiver.
-AR=$lt_AR
-
-# Flags to create an archive.
-AR_FLAGS=$lt_AR_FLAGS
-
-# How to feed a file listing to the archiver.
-archiver_list_spec=$lt_archiver_list_spec
-
-# A symbol stripping program.
-STRIP=$lt_STRIP
-
-# Commands used to install an old-style archive.
-RANLIB=$lt_RANLIB
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Whether to use a lock for old archive extraction.
-lock_old_archive_extraction=$lock_old_archive_extraction
-
-# A C compiler.
-LTCC=$lt_CC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_CFLAGS
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration.
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair.
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# Transform the output of nm in a C name address pair when lib prefix is needed.
-global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
-
-# Specify filename containing input files for \$NM.
-nm_file_list_spec=$lt_nm_file_list_spec
-
-# The root where to search for dependent libraries,and in which our libraries should be installed.
-lt_sysroot=$lt_sysroot
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# Used to examine libraries when file_magic_cmd begins with "file".
-MAGIC_CMD=$MAGIC_CMD
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Manifest tool.
-MANIFEST_TOOL=$lt_MANIFEST_TOOL
-
-# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
-DSYMUTIL=$lt_DSYMUTIL
-
-# Tool to change global to local symbols on Mac OS X.
-NMEDIT=$lt_NMEDIT
-
-# Tool to manipulate fat objects and archives on Mac OS X.
-LIPO=$lt_LIPO
-
-# ldd/readelf like tool for Mach-O binaries on Mac OS X.
-OTOOL=$lt_OTOOL
-
-# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
-OTOOL64=$lt_OTOOL64
-
-# Old archive suffix (normally "a").
-libext=$libext
-
-# Shared library suffix (normally ".so").
-shrext_cmds=$lt_shrext_cmds
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at link time.
-variables_saved_for_relink=$lt_variables_saved_for_relink
-
-# Do we need the "lib" prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Library versioning type.
-version_type=$version_type
-
-# Shared library runtime path variable.
-runpath_var=$runpath_var
-
-# Shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Permission mode override for installation of shared libraries.
-install_override_mode=$lt_install_override_mode
-
-# Command to use after installation of a shared archive.
-postinstall_cmds=$lt_postinstall_cmds
-
-# Command to use after uninstallation of a shared archive.
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# As "finish_cmds", except a single script fragment to be evaled but
-# not shown.
-finish_eval=$lt_finish_eval
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Compile-time system search path for libraries.
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-
-# The linker used to build libraries.
-LD=$lt_LD
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# Commands used to build an old-style archive.
-old_archive_cmds=$lt_old_archive_cmds
-
-# A language specific compiler.
-CC=$lt_compiler
-
-# Is the compiler the GNU compiler?
-with_gcc=$GCC
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
-
-# Whether or not to disallow shared libs when runtime libs are static.
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
-
-# Whether the compiler copes with passing no objects directly.
-compiler_needs_object=$lt_compiler_needs_object
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-
-# Commands used to build a loadable module if different from building
-# a shared archive.
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
-
-# Whether we are building with GNU ld or not.
-with_gnu_ld=$lt_with_gnu_ld
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
-
-# Flag that enforces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
-
-# Whether we need a single "-rpath" flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary.
-hardcode_direct=$hardcode_direct
-
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
-# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
-# library is relocated.
-hardcode_direct_absolute=$hardcode_direct_absolute
-
-# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-# into the resulting binary.
-hardcode_minus_L=$hardcode_minus_L
-
-# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-# into the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
-
-# Set to "yes" if building a shared library automatically hardcodes DIR
-# into the library and all subsequent libraries and executables linked
-# against it.
-hardcode_automatic=$hardcode_automatic
-
-# Set to yes if linker adds runtime paths of dependent libraries
-# to runtime path list.
-inherit_rpath=$inherit_rpath
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
-
-# Set to "yes" if exported symbols are required.
-always_export_symbols=$always_export_symbols
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# Commands necessary for linking programs (against libraries) with templates.
-prelink_cmds=$lt_prelink_cmds
-
-# Commands necessary for finishing linking programs.
-postlink_cmds=$lt_postlink_cmds
-
-# Specify filename containing input files.
-file_list_spec=$lt_file_list_spec
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
-
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
- case $host_os in
- aix3*)
- cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-_LT_EOF
- ;;
- esac
-
-
-ltmain="$ac_aux_dir/ltmain.sh"
-
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- if test x"$xsi_shell" = xyes; then
- sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\ # positional parameters, so assign one to ordinary parameter first.\
-\ func_stripname_result=${3}\
-\ func_stripname_result=${func_stripname_result#"${1}"}\
-\ func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\ func_split_long_opt_name=${1%%=*}\
-\ func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\ func_split_short_opt_arg=${1#??}\
-\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\ case ${1} in\
-\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\ *) func_lo2o_result=${1} ;;\
-\ esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
- func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
- func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
- func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
- sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
- eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\ func_quote_for_eval "${2}"\
-\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
- mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-
- ;;
- "po-directories":C)
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done ;;
-
- esac
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit 1
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
+++ /dev/null
-# Makefile.in generated by automake 1.13.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile for Recode related contributions.
-# Copyright © 1997, 1998, 2000 Free Software Foundation, Inc.
-# François Pinard <pinard@iro.umontreal.ca>
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = contrib
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/mkinstalldirs ChangeLog README
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/malloc.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/realloc.m4 \
- $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = gnits
-AMIGA_PORT = Amiga/lib-Makefile Amiga/src-Makefile
-DJGPP_PORT = DJGPP/README.in DJGPP/config.site DJGPP/configdj.bat \
-DJGPP/configdj.sed DJGPP/DJGPP/README DJGPP/recodepo.sh
-
-ELISP_FILES = recode.el utf8.el
-SPEC_FILES = recode.spec1 recode.spec2
-EXTRA_DIST = $(AMIGA_PORT) $(DJGPP_PORT) $(ELISP_FILES) $(SPEC_FILES)
-MAINTAINERCLEANFILES = DJGPP/README DJGPP/fnchange.lst
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits contrib/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits contrib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile all-local
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am all-local check check-am clean clean-generic \
- clean-libtool cscopelist-am ctags-am distclean \
- distclean-generic distclean-libtool distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am
-
-
-all-local: DJGPP/README DJGPP/fnchange.lst
-
-$(srcdir)/DJGPP/README: DJGPP/README.in $(top_srcdir)/configure.ac
- packageversion=`echo "$(VERSION)" | sed 's/\.//g'`; \
- sed \
- -e 's/@V@/$(PACKAGE)-$(VERSION)/g' \
- -e 's/@VER@/$(VERSION)/g' \
- -e "s/@packageversion@/$$packageversion/g" \
- -e "s/@treeversion@/$(VERSION)/g" \
- $(srcdir)/DJGPP/README.in > $@-tmp
- mv $@-tmp $@
-
-$(srcdir)/DJGPP/fnchange.lst: DJGPP/fnchange.in $(top_srcdir)/configure.ac
- sed \
- -e '/^#/d' \
- -e 's/@V@/$(PACKAGE)-$(VERSION)/g' \
- $(srcdir)/DJGPP/fnchange.in > $@-tmp
- mv $@-tmp $@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2006-10-15.18
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
- '')
- echo "$0: No command. Try \`$0 --help' for more information." 1>&2
- exit 1;
- ;;
- -h | --h*)
- cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
- depmode Dependency tracking mode.
- source Source file read by `PROGRAMS ARGS'.
- object Object file output by `PROGRAMS ARGS'.
- DEPDIR directory where to store dependencies.
- depfile Dependency file to output.
- tmpdepfile Temporary file to use when outputing dependencies.
- libtool Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
- exit $?
- ;;
- -v | --v*)
- echo "depcomp $scriptversion"
- exit $?
- ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
- echo "depcomp: Variables source, object and depmode must be set" 1>&2
- exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
- sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags. We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write. Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
- # HP compiler uses -M and no extra arg.
- gccflag=-M
- depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want. Yay! Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff. Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am. Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
- for arg
- do
- case $arg in
- -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
- *) set fnord "$@" "$arg" ;;
- esac
- shift # fnord
- shift # $arg
- done
- "$@"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- mv "$tmpdepfile" "$depfile"
- ;;
-
-gcc)
-## There are various ways to get dependency output from gcc. Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-## up in a subdir. Having to rename by hand is ugly.
-## (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-## than renaming).
- if test -z "$gccflag"; then
- gccflag=-MD,
- fi
- "$@" -Wp,"$gccflag$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
- sed -e 's/^[^:]*: / /' \
- -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header). We avoid this by adding
-## dummy dependencies for each header file. Too bad gcc doesn't do
-## this for us directly.
- tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'. On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp)
- # This case exists only to let depend.m4 do its work. It works by
- # looking at the text of this script. This case will never be run,
- # since it is checked for above.
- exit 1
- ;;
-
-sgi)
- if test "$libtool" = yes; then
- "$@" "-Wp,-MDupdate,$tmpdepfile"
- else
- "$@" -MDupdate "$tmpdepfile"
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
-
- if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
- echo "$object : \\" > "$depfile"
-
- # Clip off the initial element (the dependent). Don't try to be
- # clever and replace this with sed code, as IRIX sed won't handle
- # lines with more than a fixed number of characters (4096 in
- # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
- # the IRIX cc adds comments like `#:fec' to the end of the
- # dependency line.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr '
-' ' ' >> $depfile
- echo >> $depfile
-
- # The second pass generates a dummy entry for each header file.
- tr ' ' '
-' < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> $depfile
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-aix)
- # The C for AIX Compiler uses -M and outputs the dependencies
- # in a .u file. In older versions, this file always lives in the
- # current directory. Also, the AIX compiler puts `$object:' at the
- # start of each line; $object doesn't have directory information.
- # Version 6 uses the directory in both cases.
- stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
- tmpdepfile="$stripped.u"
- if test "$libtool" = yes; then
- "$@" -Wc,-M
- else
- "$@" -M
- fi
- stat=$?
-
- if test -f "$tmpdepfile"; then :
- else
- stripped=`echo "$stripped" | sed 's,^.*/,,'`
- tmpdepfile="$stripped.u"
- fi
-
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
-
- if test -f "$tmpdepfile"; then
- outname="$stripped.o"
- # Each line is of the form `foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
- sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-icc)
- # Intel's C compiler understands `-MD -MF file'. However on
- # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want:
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using \ :
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
-
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile"
- exit $stat
- fi
- rm -f "$depfile"
- # Each line is of the form `foo.o: dependent.h',
- # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # `$object: dependent.h' and one to simply `dependent.h:'.
- sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
- # Some versions of the HPUX 10.20 sed can't process this invocation
- # correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-hp2)
- # The "hp" stanza above does not work with aCC (C++) and HP's ia64
- # compilers, which have integrated preprocessors. The correct option
- # to use with these is +Maked; it writes dependencies to a file named
- # 'foo.d', which lands next to the object file, wherever that
- # happens to be.
- # Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- if test "$libtool" = yes; then
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir.libs/$base.d
- "$@" -Wc,+Maked
- else
- tmpdepfile1=$dir$base.d
- tmpdepfile2=$dir$base.d
- "$@" +Maked
- fi
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
- # Add `dependent.h:' lines.
- sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile" "$tmpdepfile2"
- ;;
-
-tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in `foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- # That's a tab and a space in the [].
- sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
-
-#nosideeffect)
- # This comment above is used by automake to tell side-effect
- # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- test -z "$dashmflag" && dashmflag=-M
- # Require at least two characters before searching for `:'
- # in the target name. This is to cope with DOS-style filenames:
- # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
- "$@" $dashmflag |
- sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-dashXmstdout)
- # This case only exists to satisfy depend.m4. It is never actually
- # run, as this mode is specially recognized in the preamble.
- exit 1
- ;;
-
-makedepend)
- "$@" || exit $?
- # Remove any Libtool call
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
- # X makedepend
- shift
- cleared=no
- for arg in "$@"; do
- case $cleared in
- no)
- set ""; shift
- cleared=yes ;;
- esac
- case "$arg" in
- -D*|-I*)
- set fnord "$@" "$arg"; shift ;;
- # Strip any option that makedepend may not understand. Remove
- # the object too, otherwise makedepend will parse it as a source file.
- -*|$object)
- ;;
- *)
- set fnord "$@" "$arg"; shift ;;
- esac
- done
- obj_suffix="`echo $object | sed 's/^.*\././'`"
- touch "$tmpdepfile"
- ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
- rm -f "$depfile"
- cat < "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile" "$tmpdepfile".bak
- ;;
-
-cpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout.
- "$@" || exit $?
-
- # Remove the call to Libtool.
- if test "$libtool" = yes; then
- while test $1 != '--mode=compile'; do
- shift
- done
- shift
- fi
-
- # Remove `-o $object'.
- IFS=" "
- for arg
- do
- case $arg in
- -o)
- shift
- ;;
- $object)
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift # fnord
- shift # $arg
- ;;
- esac
- done
-
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- cat < "$tmpdepfile" >> "$depfile"
- sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-msvisualcpp)
- # Important note: in order to support this mode, a compiler *must*
- # always write the preprocessed file to stdout, regardless of -o,
- # because we must use -o when running libtool.
- "$@" || exit $?
- IFS=" "
- for arg
- do
- case "$arg" in
- "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
- *)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
- esac
- done
- "$@" -E |
- sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
- rm -f "$depfile"
- echo "$object : \\" > "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
- echo " " >> "$depfile"
- . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
- rm -f "$tmpdepfile"
- ;;
-
-none)
- exec "$@"
- ;;
-
-*)
- echo "Unknown depmode $depmode" 1>&2
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.13.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile for Recode documentation.
-# Copyright © 1994, 95, 96, 97, 98, 99, 00 Free Software Foundation, Inc.
-# François Pinard <pinard@iro.umontreal.ca>
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/mkinstalldirs mdate-sh $(srcdir)/version.texi \
- $(srcdir)/stamp-vti texinfo.tex ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/malloc.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/realloc.m4 \
- $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
-am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
-am__v_DVIPS_0 = @echo " DVIPS " $@;
-am__v_DVIPS_1 =
-AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
-am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
-am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
-am__v_MAKEINFO_1 =
-AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
-am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
-am__v_INFOHTML_0 = @echo " INFOHTML" $@;
-am__v_INFOHTML_1 =
-AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
-am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
-am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
-am__v_TEXI2DVI_1 =
-AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
-am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
-am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
-am__v_TEXI2PDF_1 =
-AM_V_texinfo = $(am__v_texinfo_@AM_V@)
-am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
-am__v_texinfo_0 = -q
-am__v_texinfo_1 =
-AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
-am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
-am__v_texidevnull_0 = > /dev/null
-am__v_texidevnull_1 =
-INFO_DEPS = $(srcdir)/recode.info
-am__TEXINFO_TEX_DIR = $(srcdir)
-DVIS = recode.dvi
-PDFS = recode.pdf
-PSS = recode.ps
-HTMLS = recode.html
-TEXINFOS = recode.texi
-TEXI2DVI = texi2dvi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__installdirs = "$(DESTDIR)$(infodir)"
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = LANG= LANGUAGE= @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = gnits
-info_TEXINFOS = recode.texi
-EXTRA_DIST = rfc1345.texi File-Latin1 help2man
-MOSTLYCLEANFILES = recode.ops
-
-# Relative to $(srcdir).
-KELD = ../keld
-CHARSETS_DEF = $(KELD)/charsets.def
-MNEMONICS_DS = $(KELD)/iso10646.def $(KELD)/other.def $(KELD)/control.def
-PYTHON = python
-TABLES_PY = $(PYTHON) $(top_srcdir)/tables.py
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texi
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-.texi.info:
- $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- am__cwd=`pwd` && $(am__cd) $(srcdir) && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
- done; \
- else :; fi && \
- cd "$$am__cwd"; \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ $<; \
- then \
- rc=0; \
- $(am__cd) $(srcdir); \
- else \
- rc=$$?; \
- $(am__cd) $(srcdir) && \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; exit $$rc
-
-.texi.dvi:
- $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
- $<
-
-.texi.pdf:
- $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
- $<
-
-.texi.html:
- $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
- $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) $<; \
- then \
- rm -rf $@; \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
- else \
- if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
- rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
- exit 1; \
- fi
-recode.pdf: recode.texi $(srcdir)/version.texi
-recode.html: recode.texi $(srcdir)/version.texi
-$(srcdir)/version.texi: $(srcdir)/stamp-vti
-$(srcdir)/stamp-vti: recode.texi $(top_srcdir)/configure
- @(dir=.; test -f ./recode.texi || dir=$(srcdir); \
- set `$(SHELL) $(srcdir)/mdate-sh $$dir/recode.texi`; \
- echo "@set UPDATED $$1 $$2 $$3"; \
- echo "@set UPDATED-MONTH $$2 $$3"; \
- echo "@set EDITION $(VERSION)"; \
- echo "@set VERSION $(VERSION)") > vti.tmp
- @cmp -s vti.tmp $(srcdir)/version.texi \
- || (echo "Updating $(srcdir)/version.texi"; \
- cp vti.tmp $(srcdir)/version.texi)
- -@rm -f vti.tmp
- @cp $(srcdir)/version.texi $@
-
-mostlyclean-vti:
- -rm -f vti.tmp
-
-maintainer-clean-vti:
- -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
-.dvi.ps:
- $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- $(DVIPS) $(AM_V_texinfo) -o $@ $<
-
-uninstall-dvi-am:
- @$(NORMAL_UNINSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
- rm -f "$(DESTDIR)$(dvidir)/$$f"; \
- done
-
-uninstall-html-am:
- @$(NORMAL_UNINSTALL)
- @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
- rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
- done
-
-uninstall-info-am:
- @$(PRE_UNINSTALL)
- @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
- if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
- then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
- echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-
-uninstall-pdf-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-uninstall-ps-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
- rm -f "$(DESTDIR)$(psdir)/$$f"; \
- done
-
-dist-info: $(INFO_DEPS)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- case $$base in \
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
- for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
- if test -f $$file; then \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f "$(distdir)/$$relfile" || \
- cp -p $$file "$(distdir)/$$relfile"; \
- else :; fi; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -rf recode.t2d recode.t2p
-
-clean-aminfo:
- -test -z "recode.dvi recode.pdf recode.ps recode.html" \
- || rm -rf recode.dvi recode.pdf recode.ps recode.html
-
-maintainer-clean-aminfo:
- @list='$(INFO_DEPS)'; for i in $$list; do \
- i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
- rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- done
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS)
-installdirs:
- for dir in "$(DESTDIR)$(infodir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
- -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-html: html-am
-
-html-am: $(HTMLS)
-
-info: info-am
-
-info-am: $(INFO_DEPS)
-
-install-data-am: install-info-am
-
-install-dvi: install-dvi-am
-
-install-dvi-am: $(DVIS)
- @$(NORMAL_INSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
- done
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- d2=$$d$$p; \
- if test -d "$$d2"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
- else \
- list2="$$list2 $$d2"; \
- fi; \
- done; \
- test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
- done; }
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
- fi; \
- for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
- if test -f $$ifile; then \
- echo "$$ifile"; \
- else : ; fi; \
- done; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
- @$(POST_INSTALL)
- @if $(am__can_run_installinfo); then \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
- install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
- done; \
- else : ; fi
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-install-ps: install-ps-am
-
-install-ps-am: $(PSS)
- @$(NORMAL_INSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic maintainer-clean-vti
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
- mostlyclean-libtool mostlyclean-vti
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
- uninstall-pdf-am uninstall-ps-am
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
- clean-libtool cscopelist-am ctags-am dist-info distclean \
- distclean-generic distclean-libtool distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-aminfo maintainer-clean-generic \
- maintainer-clean-vti mostlyclean mostlyclean-aminfo \
- mostlyclean-generic mostlyclean-libtool mostlyclean-vti pdf \
- pdf-am ps ps-am tags-am uninstall uninstall-am \
- uninstall-dvi-am uninstall-html-am uninstall-info-am \
- uninstall-pdf-am uninstall-ps-am
-
-
-$(srcdir)/recode.info: rfc1345.texi
-recode.dvi: rfc1345.texi
-
-# There is duplication of work with making src/strip-{pool,data}.c.
-# This used to be combined, but it seems clearer to keep both separate.
-rfc1345.texi: ../tables.py $(MNEMONICS_DS) $(CHARSETS_DEF)
- $(TABLES_PY) -C $(srcdir) -t $(MNEMONICS_DS) $(CHARSETS_DEF)
-
-fr-rfc1345.texi: ../tables.py $(MNEMONICS_DS) $(CHARSETS_DEF)
- $(TABLES_PY) -C $(srcdir) -Ft $(MNEMONICS_DS) $(CHARSETS_DEF)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-This is recode.info, produced by makeinfo version 5.1 from recode.texi.
-
-INFO-DIR-SECTION Internationalization and character sets
-START-INFO-DIR-ENTRY
-* recode: (recode). Conversion between character sets and surfaces.
-END-INFO-DIR-ENTRY
-
-This file documents the Recode program and library, which has the
-purpose of converting files between various character sets and surfaces.
-
- Copyright (C) 1990, 93, 94, 96, 97, 98, 99, 00 Free Software
-Foundation, Inc.
-
- Permission is granted to make and distribute verbatim copies of this
-manual provided the copyright notice and this permission notice are
-preserved on all copies.
-
- Permission is granted to copy and distribute modified versions of
-this manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
- Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions, except that this permission notice may be stated in a
-translation approved by the Foundation.
-
-\1f
-File: recode.info, Node: Top, Next: Tutorial, Prev: (dir), Up: (dir)
-
-Recode
-******
-
-This recoding library converts files between various coded character
-sets and surface encodings. When this cannot be achieved exactly, it
-may get rid of the offending characters or fall back on approximations.
-The library recognises or produces more than 300 different character
-sets and is able to convert files between almost any pair. Most RFC 1345
-character sets, and all character sets from a pre-installed 'iconv'
-library, are supported. The 'recode' program is a handy front-end to
-the library.
-
- This manual documents Recode 3.7-beta2.
-
-* Menu:
-
-* Tutorial:: Quick Tutorial
-* Introduction:: Terminology and purpose
-* Invoking recode:: How to use this program
-* Library:: A recoding library
-* Universal:: The universal charset
-* iconv:: The 'iconv' library
-* Tabular:: Tabular sources (RFC 1345)
-* ASCII misc:: ASCII and some derivatives
-* IBM and MS:: Some IBM or Microsoft charsets
-* CDC:: Charsets for CDC machines
-* Micros:: Other micro-computer charsets
-* Miscellaneous:: Various other charsets
-* Surfaces:: All about surfaces
-* Internals:: Internal aspects
-* Concept Index:: Concept Index
-* Option Index:: Option Index
-* Library Index:: Library Index
-* Charset and Surface Index:: Charset and Surface Index
-
- -- The Detailed Node Listing --
-
-Terminology and purpose
-
-* Charset overview:: Overview of charsets
-* Surface overview:: Overview of surfaces
-* Contributing:: Contributions and bug reports
-
-How to use this program
-
-* Synopsis:: Synopsis of 'recode' call
-* Requests:: The REQUEST parameter
-* Listings:: Asking for various lists
-* Recoding:: Controlling how files are recoded
-* Reversibility:: Reversibility issues
-* Sequencing:: Selecting sequencing methods
-* Mixed:: Using mixed charset input
-* Emacs:: Using Recode within Emacs
-* Debugging:: Debugging considerations
-
-A recoding library
-
-* Outer level:: Outer level functions
-* Request level:: Request level functions
-* Task level:: Task level functions
-* Charset level:: Charset level functions
-* Errors:: Handling errors
-
-The universal charset
-
-* UCS-2:: Universal Character Set, 2 bytes
-* UCS-4:: Universal Character Set, 4 bytes
-* UTF-7:: Universal Transformation Format, 7 bits
-* UTF-8:: Universal Transformation Format, 8 bits
-* UTF-16:: Universal Transformation Format, 16 bits
-* count-characters:: Frequency count of characters
-* dump-with-names:: Fully interpreted UCS dump
-
-ASCII and some derivatives
-
-* ASCII:: Usual ASCII
-* ISO 8859:: ASCII extended by Latin Alphabets
-* ASCII-BS:: ASCII 7-bits, 'BS' to overstrike
-* flat:: ASCII without diacritics nor underline
-
-Some IBM or Microsoft charsets
-
-* EBCDIC:: EBCDIC codes
-* IBM-PC:: IBM's PC code
-* Icon-QNX:: Unisys' Icon code
-
-Charsets for CDC machines
-
-* Display Code:: Control Data's Display Code
-* CDC-NOS:: ASCII 6/12 from NOS
-* Bang-Bang:: ASCII "bang bang"
-
-Other micro-computer charsets
-
-* Apple-Mac:: Apple's Macintosh code
-* AtariST:: Atari ST code
-
-Various other charsets
-
-* HTML:: World Wide Web representations
-* LaTeX:: LaTeX macro calls
-* Texinfo:: GNU project documentation files
-* Vietnamese:: Vietnamese charsets
-* African:: African charsets
-* Others:: Cyrillic and other charsets
-* Java:: Java code
-* Texte:: Easy French conventions
-* Mule:: Mule as a multiplexed charset
-
-All about surfaces
-
-* Permutations:: Permuting groups of bytes
-* End lines:: Representation for end of lines
-* MIME:: MIME contents encodings
-* Dump:: Interpreted character dumps
-* Test:: Artificial data for testing
-
-Internal aspects
-
-* Main flow:: Overall organisation
-* New charsets:: Adding new charsets
-* New surfaces:: Adding new surfaces
-* Design:: Comments on the library design
-
-
-\1f
-File: recode.info, Node: Tutorial, Next: Introduction, Prev: Top, Up: Top
-
-1 Quick Tutorial
-****************
-
-So, really, you just are in a hurry to use Recode, and do not feel like
-studying this manual? Even reading this paragraph slows you down? We
-might have a problem, as you will have to do some guess work, and might
-not become very proficient unless you have a very solid intuition....
-
- Let me use here, as a quick tutorial, an actual reply of mine to a
-Recode user, who writes:
-
- My situation is this--I occasionally get email with special
- characters in it. Sometimes this mail is from a user using IBM
- software and sometimes it is a user using Mac software. I myself
- am on a SPARC Solaris machine.
-
- Your situation is similar to mine, except that I _often_ receive
-email needing recoding, that is, much more than _occasionally_! The
-usual recodings I do are Mac to Latin-1, IBM page codes to Latin-1,
-Easy-French to Latin-1, remove Quoted-Printable, remove Base64. These
-are so frequent that I made myself a few two-keystroke Emacs commands to
-filter the Emacs region. This is very convenient for me. I also resort
-to many other email conversions, yet more rarely than the frequent cases
-above.
-
- It _seems_ like this should be doable using Recode. However, when
- I try something like 'recode mac macfile.txt' I get nothing out--no
- error, no output, nothing.
-
- *Note:* For the following discussion to be true, you should have
-something like 'export LANG=fr_FR.ISO-8859-1' in your environment, the
-important bit here being the specification of an preferred charset.
-
- Presuming you are using some recent version of Recode, the command:
-
- recode mac macfile.txt
-
-is a request for recoding 'macfile.txt' over itself, overwriting the
-original, from Macintosh usual character code and Macintosh end of
-lines, to Latin-1 and Unix end of lines. This is overwrite mode. If
-you want to use Recode as a filter, which is probably what you need,
-rather do:
-
- recode mac
-
-and give your Macintosh file as standard input, you'll get the Latin-1
-file on standard output. The above command is an abbreviation for any
-of:
-
- recode mac..
- recode mac..l1
- recode mac..Latin-1
- recode mac/CR..Latin-1/
- recode Macintosh..ISO_8859-1
- recode Macintosh/CR..ISO_8859-1/
-
- That is, a 'CR' surface, encoding newlines with ASCII <CR>, is first
-to be removed (this is a default surface for 'mac'), then the Macintosh
-charset is converted to Latin-1 and no surface is added to the result
-(there is no default surface for 'l1'). If you want 'mac' code
-converted, but you know that newlines are already coded the Unix way,
-just do:
-
- recode mac/
-
-the slash then overriding the default surface with empty, that is, none.
-Here are other easy recipes:
-
- recode pc to filter IBM-PC code and CR-LF (default) to Latin-1
- recode pc/ to filter IBM-PC code to Latin-1
- recode 850 to filter code page 850 and CR-LF (default) to Latin-1
- recode 850/ to filter code page 850 to Latin-1
- recode /qp to remove quoted printable
-
- The last one is indeed equivalent to any of:
-
- recode /qp..
- recode l1/qp..l1/
- recode ISO_8859-1/Quoted-Printable..ISO_8859-1/
-
- Here are some reverse recipes:
-
- recode ..mac to filter Latin-1 to Macintosh code and CR (default)
- recode ..mac/ to filter Latin-1 to Macintosh code
- recode ..pc to filter Latin-1 to IBM-PC code and CR-LF (default)
- recode ..pc/ to filter Latin-1 to IBM-PC code
- recode ..850 to filter Latin-1 to code page 850 and CR-LF (default)
- recode ..850/ to filter Latin-1 to code page 850
- recode ../qp to force quoted printable
-
- In all the above calls, replace 'recode' by 'recode -f' if you want
-to proceed despite recoding errors. If you do not use '-f' and there is
-an error, the recoding output will be interrupted after first error in
-filter mode, or the file will not be replaced by a recoded copy in
-overwrite mode.
-
- You may use 'recode -l' to get a list of available charsets and
-surfaces, and 'recode --help' to get a quick summary of options. The
-above output is meant for those having already read this manual, so let
-me dare a suggestion: why could not you find a few more minutes in your
-schedule to peek further down, right into the following chapters!
-
-\1f
-File: recode.info, Node: Introduction, Next: Invoking recode, Prev: Tutorial, Up: Top
-
-2 Terminology and purpose
-*************************
-
-A few terms are used over and over in this manual, our wise reader will
-learn their meaning right away. Both ISO (International Organization
-for Standardisation) and IETF (Internet Engineering Task Force) have
-their own terminology, this document does not try to stick to either one
-in a strict way, while it does not want to throw more confusion in the
-field. On the other hand, it would not be efficient using paraphrases
-all the time, so Recode coins a few short words, which are explained
-below.
-
- A "charset", in the context of Recode, is a particular association
-between computer codes on one side, and a repertoire of intended
-characters on the other side. Codes are usually taken from a set of
-consecutive small integers, starting at 0. Some characters have a
-graphical appearance (glyph) or displayable effect, others have special
-uses like, for example, to control devices or to interact with
-neighbouring codes to specify them more precisely. So, a _charset_ is
-roughly one of those tables, giving a meaning to each of the codes from
-the set of allowable values. MIME also uses the term charset with
-approximately the same meaning. It does _not_ exactly corresponds to
-what ISO calls a "coded character set", that is, a set of characters
-with an encoding for them. An coded character set does not necessarily
-use all available code positions, while a MIME charset usually tries to
-specify them all. A MIME charset might be the union of a few disjoint
-coded character sets.
-
- A "surface" is a term used in Recode only, and is a short for surface
-transformation of a charset stream. This is any kind of mapping,
-usually reversible, which associates physical bits in some medium for a
-stream of characters taken from one or more charsets (usually one). A
-surface is a kind of varnish added over a charset so it fits in actual
-bits and bytes. How end of lines are exactly encoded is not really
-pertinent to the charset, and so, there is surface for end of lines.
-'Base64' is also a surface, as we may encode any charset in it. Other
-examples would 'DES' enciphering, or 'gzip' compression (even if Recode
-does not offer them currently): these are ways to give a real life to
-theoretical charsets. The "trivial" surface consists into putting
-characters into fixed width little chunks of bits, usually eight such
-bits per character. But things are not always that simple.
-
- This Recode library, and the program by that name, have the purpose
-of converting files between various charsets and surfaces. When this
-cannot be done in exact ways, as it is often the case, the program may
-get rid of the offending characters or fall back on approximations.
-This library recognises or produces around 175 such charsets under 500
-names, and handle a dozen surfaces. Since it can convert each charset
-to almost any other one, many thousands of different conversions are
-possible.
-
- The Recode program and library do not usually know how to split and
-sort out textual and non-textual information which may be mixed in a
-single input file. For example, there is no surface which currently
-addresses the problem of how lines are blocked into physical records,
-when the blocking information is added as binary markers or counters
-within files. So, Recode should be given textual streams which are
-rather _pure_.
-
- This tool pays special attention to superimposition of diacritics for
-some French representations. This orientation is mostly historical, it
-does not impair the usefulness, generality or extensibility of the
-program. 'recode' is both a French and English word. For those who pay
-attention to those things, the proper pronunciation is French (that is,
-'racud', with 'a' like in 'above', and 'u' like in 'cut').
-
- The Recode program and library has been written by Franc,ois Pinard.
-With time, it got to reuse works from other contributors, and notably,
-those of Keld Simonsen and Bruno Haible.
-
-* Menu:
-
-* Charset overview:: Overview of charsets
-* Surface overview:: Overview of surfaces
-* Contributing:: Contributions and bug reports
-
-\1f
-File: recode.info, Node: Charset overview, Next: Surface overview, Prev: Introduction, Up: Introduction
-
-2.1 Overview of charsets
-========================
-
-Recoding is currently possible between many charsets, the bulk of which
-is described by RFC 1345 tables or available in a pre-installed external
-'iconv' library. *Note Tabular::, and *note iconv::. The Recode
-library also handles some charsets in some specialised ways. These are:
-
- * 6-bit charsets based on CDC display code: 6/12 code from NOS;
- bang-bang code from Universite' de Montre'al;
-
- * 7-bit ASCII: without any diacritics, or else: using backspace for
- overstriking; Unisys' Icon convention; TeX/LaTeX coding; easy
- French conventions for electronic mail;
-
- * 8-bit extensions to ASCII: ISO Latin-1, Atari ST code, IBM's code
- for the PC, Apple's code for the Macintosh;
-
- * 8-bit non-ASCII codes: three flavours of EBCDIC;
-
- * 16-bit or 31-bit universal characters, and their transfer
- encodings.
-
- The introduction of RFC 1345 in Recode has brought with it a few
-charsets having the functionality of older ones, but yet being different
-in subtle ways. The effects have not been fully investigated yet, so
-for now, clashes are avoided, the old and new charsets are kept well
-separate.
-
- Conversion is possible between almost any pair of charsets. Here is
-a list of the exceptions. One may not recode _from_ the 'flat',
-'count-characters' or 'dump-with-names' charsets, nor _from_ or _to_ the
-'data', 'tree' or ':iconv:' charsets. Also, if we except the 'data' and
-'tree' pseudo-charsets, charsets and surfaces live in disjoint recoding
-spaces, one cannot really transform a surface into a charset or
-vice-versa, as surfaces are only meant to be applied over charsets, or
-removed from them.
-
-\1f
-File: recode.info, Node: Surface overview, Next: Contributing, Prev: Charset overview, Up: Introduction
-
-2.2 Overview of surfaces
-========================
-
-For various practical considerations, it sometimes happens that the
-codes making up a text, written in a particular charset, cannot simply
-be put out in a file one after another without creating problems or
-breaking other things. Sometimes, 8-bit codes cannot be written on a
-7-bit medium, variable length codes need kind of envelopes, newlines
-require special treatment, etc. We sometimes have to apply "surfaces"
-to a stream of codes, which surfaces are kind of tricks used to fit the
-charset into those practical constraints. Moreover, similar surfaces or
-tricks may be useful for many unrelated charsets, and many surfaces can
-be used at once over a single charset.
-
- So, Recode has machinery to describe a combination of a charset with
-surfaces used over it in a file. We would use the expression "pure
-charset" for referring to a charset free of any surface, that is, the
-conceptual association between integer codes and character intents.
-
- It is not always clear if some transformation will yield a charset or
-a surface, especially for those transformations which are only
-meaningful over a single charset. The Recode library is not overly
-picky as identifying surfaces as such: when it is practical to consider
-a specialised surface as if it were a charset, this is preferred, and
-done.
-
-\1f
-File: recode.info, Node: Contributing, Prev: Surface overview, Up: Introduction
-
-2.3 Contributions and bug reports
-=================================
-
-Even being the Recode author and current maintainer, I am no specialist
-in charset standards. I only made Recode along the years to solve my
-own needs, but felt it was applicable for the needs of others. Some FSF
-people liked the program structure and suggested to make it more widely
-available. I often rely on Recode users suggestions to decide what is
-best to be done next.
-
- Properly protecting Recode about possible copyright fights is a pain
-for me and for contributors, but we cannot avoid addressing the issue in
-the long run. Besides, the Free Software Foundation, which mandates the
-GNU project, is very sensible to this matter. GNU standards suggest
-that we stay cautious before looking at copyrighted code. The safest
-and simplest way for me is to gather ideas and reprogram them anew, even
-if this might slow me down considerably. For contributions going beyond
-a few lines of code here and there, the FSF definitely requires employer
-disclaimers and copyright assignments in writing.
-
- When you contribute something to Recode, _please_ explain what it is
-about. Do not take for granted that I know those charsets which are
-familiar to you. Once again, I'm no expert, and you have to help me.
-Your explanations could well find their way into this documentation,
-too. Also, for contributing new charsets or new surfaces, as much as
-possible, please provide good, solid, verifiable references for the
-tables you used(1).
-
- Many users contributed to Recode already, I am grateful to them for
-their interest and involvement. Some suggestions can be integrated
-quickly while some others have to be delayed, I have to draw a line
-somewhere when time comes to make a new release, about what would go in
-it and what would go in the next.
-
- Please send suggestions, documentation errors and bug reports to
-<recode-bugs@iro.umontreal.ca> or, if you prefer, directly to
-<pinard@iro.umontreal.ca>, Franc,ois Pinard. Do not be afraid to report
-details, because this program is the mere aggregation of hundreds of
-details.
-
- ---------- Footnotes ----------
-
- (1) I'm not prone at accepting a charset you just invented, and which
-nobody uses yet: convince your friends and community first!
-
-\1f
-File: recode.info, Node: Invoking recode, Next: Library, Prev: Introduction, Up: Top
-
-3 How to use this program
-*************************
-
-With the synopsis of the 'recode' call, we stress the difference between
-using this program as a file filter, or recoding many files at once.
-The first parameter of any call states the recoding request, and this
-deserves a section on its own. Options are then presented, but somewhat
-grouped according to the related functionalities they control.
-
-* Menu:
-
-* Synopsis:: Synopsis of 'recode' call
-* Requests:: The REQUEST parameter
-* Listings:: Asking for various lists
-* Recoding:: Controlling how files are recoded
-* Reversibility:: Reversibility issues
-* Sequencing:: Selecting sequencing methods
-* Mixed:: Using mixed charset input
-* Emacs:: Using Recode within Emacs
-* Debugging:: Debugging considerations
-
-\1f
-File: recode.info, Node: Synopsis, Next: Requests, Prev: Invoking recode, Up: Invoking recode
-
-3.1 Synopsis of 'recode' call
-=============================
-
-The general format of the program call is one of:
-
- recode [OPTION]... [CHARSET | REQUEST [FILE]... ]
-
- Some calls are used only to obtain lists produced by Recode itself,
-without actually recoding any file. They are recognised through the
-usage of listing options, and these options decide what meaning should
-be given to an optional CHARSET parameter. *Note Listings::.
-
- In other calls, the first parameter (REQUEST) always explains which
-transformations are expected on the files. There are many variations to
-the aspect of this parameter. We will discuss more complex situations
-later (*note Requests::), but for many simple cases, this parameter
-merely looks like this(1):
-
- BEFORE..AFTER
-
-where BEFORE and AFTER each gives the name of a charset. Each FILE will
-be read assuming it is coded with charset BEFORE, it will be recoded
-over itself so to use the charset AFTER. If there is no FILE on the
-'recode' command, the program rather acts as a Unix filter and
-transforms standard input onto standard output.
-
- The capability of recoding many files at once is very convenient.
-For example, one could easily prepare a distribution from Latin-1 to
-MSDOS, this way:
-
- mkdir package
- cp -p Makefile *.[ch] package
- recode Latin-1..MSDOS package/*
- zoo ah package.zoo package/*
- rm -rf package
-
-(In this example, the non-mandatory '-p' option to 'cp' is for
-preserving timestamps, and the 'zoo' program is an archiver from Rahul
-Dhesi which once was quite popular.)
-
- The filter operation is especially useful when the input files should
-not be altered. Let us make an example to illustrate this point.
-Suppose that someone has a file named 'datum.txt', which is almost a TeX
-file, except that diacriticised characters are written using Latin-1.
-To complete the recoding of the diacriticised characters _only_ and
-produce a file 'datum.tex', without destroying the original, one could
-do:
-
- cp -p datum.txt datum.tex
- recode -d l1..tex datum.tex
-
- However, using 'recode' as a filter will achieve the same goal more
-neatly:
-
- recode -d l1..tex <datum.txt >datum.tex
-
- This example also shows that 'l1' could be used instead of 'Latin-1';
-charset names often have such aliases.
-
- Recode has three modes are for when to set the exit status to
-non-zero:
-
- * The most lenient setting is activated with option '-f', in which
- case only system errors or library mis-usage causes the exit status
- to be set.
-
- * By default, without '-f' nor '-s', Recode sets the exit status as
- above, and also in case of invalid or untranslatable input. It
- also tries (but not always succeed) to detect if output is going to
- be ambiguous at some later recode-back time.
-
- * The stricter setting is activated with '-s', Recode then sets the
- exit status as above, or if input is not canonically coded (and it
- also prevents itself from *completing* recoding tables for making
- the recoding reversible).
-
- ---------- Footnotes ----------
-
- (1) In previous versions or Recode, a single colon ':' was used
-instead of the two dots '..' for separating charsets, but this was
-creating problems because colons are allowed in official charset names.
-The old request syntax is still recognised for compatibility purposes,
-but is deprecated.
-
-\1f
-File: recode.info, Node: Requests, Next: Listings, Prev: Synopsis, Up: Invoking recode
-
-3.2 The REQUEST parameter
-=========================
-
-In the case where the REQUEST is merely written as BEFORE..AFTER, then
-BEFORE and AFTER specify the start charset and the goal charset for the
-recoding.
-
- For Recode, charset names may contain any character, besides a comma,
-a forward slash, or two periods in a row. But in practice, charset
-names are currently limited to alphabetic letters (upper or lower case),
-digits, hyphens, underlines, periods, colons or round parentheses.
-
- The complete syntax for a valid REQUEST allows for unusual things,
-which might be surprising at first. (Do not pay too much attention to
-these facilities on first reading.) For example, REQUEST may also
-contain intermediate charsets, like in the following example:
-
- BEFORE..INTERIM1..INTERIM2..AFTER
-
-meaning that Recode should internally produce the INTERIM1 charset from
-the start charset, then work out of this INTERIM1 charset to internally
-produce INTERIM2, and from there towards the goal charset. In fact,
-Recode internally combines recipes and automatically uses interim
-charsets, when there is no direct recipe for transforming BEFORE into
-AFTER. But there might be many ways to do it. When many routes are
-possible, the above "chaining" syntax may be used to more precisely
-force the program towards a particular route, which it might not have
-naturally selected otherwise. On the other hand, because Recode tries
-to choose good routes, chaining is only needed to achieve some rare,
-unusual effects.
-
- Moreover, many such requests (sub-requests, more precisely) may be
-separated with commas (but no spaces at all), indicating a sequence of
-recodings, where the output of one has to serve as the input of the
-following one. For example, the two following requests are equivalent:
-
- BEFORE..INTERIM1..INTERIM2..AFTER
- BEFORE..INTERIM1,INTERIM1..INTERIM2,INTERIM2..AFTER
-
-In this example, the charset input for any recoding sub-request is
-identical to the charset output by the preceding sub-request. But it
-does not have to be so in the general case. One might wonder what would
-be the meaning of declaring the charset input for a recoding sub-request
-of being of different nature than the charset output by a preceding
-sub-request, when recodings are chained in this way. Such a strange
-usage might have a meaning and be useful for the Recode expert, but they
-are quite uncommon in practice.
-
- More useful is the distinction between the concept of charset, and
-the concept of surfaces. An encoded charset is represented by:
-
- PURE-CHARSET/SURFACE1/SURFACE2...
-
-using slashes to introduce surfaces, if any. The order of application
-of surfaces is usually important, they cannot be freely commuted. In
-the given example, SURFACE1 is first applied over the PURE-CHARSET, then
-SURFACE2 is applied over the result. Given this request:
-
- BEFORE/SURFACE1/SURFACE2..AFTER/SURFACE3
-
-Recode will understand that the input files should have SURFACE2 removed
-first (because it was applied last), then SURFACE1 should be removed.
-The next step will be to translate the codes from charset BEFORE to
-charset AFTER, prior to applying SURFACE3 over the result.
-
- Some charsets have one or more _implied_ surfaces. In this case, the
-implied surfaces are automatically handled merely by naming the charset,
-without any explicit surface to qualify it. Let's take an example to
-illustrate this feature. The request 'pc..l1' will indeed decode MS-DOS
-end of lines prior to converting IBM-PC codes to Latin-1, because 'pc'
-is the name of a charset(1) which has 'CR-LF' for its usual surface.
-The request 'pc/..l1' will _not_ decode end of lines, since the slash
-introduces surfaces, and even if the surface list is empty, it
-effectively defeats the automatic removal of surfaces for this charset.
-So, empty surfaces are useful, indeed!
-
- Both charsets and surfaces may have predefined alternate names, or
-aliases. However, and this is rather important to understand, implied
-surfaces are attached to individual aliases rather than on genuine
-charsets. Consequently, the official charset name and all of its
-aliases do not necessarily share the same implied surfaces. The charset
-and all its aliases may each have its own different set of implied
-surfaces.
-
- Charset names, surface names, or their aliases may always be
-abbreviated to any unambiguous prefix. Internally in Recode,
-disambiguating tables are kept separate for charset names and surface
-names.
-
- While recognising a charset name or a surface name (or aliases
-thereof), Recode ignores all characters besides letters and digits, so
-for example, the hyphens and underlines being part of an official
-charset name may safely be omitted (no need to un-confuse them!). There
-is also no distinction between upper and lower case for charset or
-surface names.
-
- One of the BEFORE or AFTER keywords may be omitted. If the double
-dot separator is omitted too, then the charset is interpreted as the
-BEFORE charset.(2)
-
- When a charset name is omitted or left empty, the value of the
-'DEFAULT_CHARSET' variable in the environment is used instead. If this
-variable is not defined, the Recode library (from version 3.6 and up)
-uses the current locale's encoding. On POSIX compliant systems, this
-depends on the first non-empty value among the environment variables
-LC_ALL, LC_CTYPE, LANG, and can be determined through the command
-'locale charmap'. If the current locale's encoding may not be resolved,
-then Recode presumes 'ASCII' (or, for Recode 3.6 only: 'CHAR').
-
- If the charset name is omitted but followed by surfaces, the surfaces
-then qualify the usual or default charset. For example, the request
-'../x' is sufficient for applying an hexadecimal surface to the input
-text(3).
-
- The allowable values for BEFORE or AFTER charsets, and various
-surfaces, are described in the remainder of this document.
-
- ---------- Footnotes ----------
-
- (1) More precisely, 'pc' is an alias for the charset 'IBM-PC'.
-
- (2) Both BEFORE and AFTER may be omitted, in which case the double
-dot separator is mandatory. This is not very useful, as the recoding
-reduces to a mere copy in that case.
-
- (3) MS-DOS is one of those systems for which the default charset has
-implied surfaces, 'CR-LF' here. Such surfaces are automatically removed
-or applied whenever the default charset is read or written, exactly as
-it would go for any other charset. In the example above, on such
-systems, the hexadecimal surface would then _replace_ the implied
-surfaces. For _adding_ an hexadecimal surface without removing any, one
-should write the request as '/../x'.
-
-\1f
-File: recode.info, Node: Listings, Next: Recoding, Prev: Requests, Up: Invoking recode
-
-3.3 Asking for various lists
-============================
-
-Many options control listing output generated by Recode itself, they are
-not meant to accompany actual file recodings. These options are:
-
-'--version'
- The program merely prints its version numbers on standard output,
- and exits without doing anything else.
-
-'--help'
- The program merely prints a page of help on standard output, and
- exits without doing any recoding.
-
-'-C'
-'--copyright'
- Given this option, all other parameters and options are ignored.
- The program prints briefly the copyright and copying conditions.
- See the file 'COPYING' in the distribution for full statement of
- the Copyright and copying conditions.
-
-'-h[LANGUAGE/][NAME]'
-'--header[=[LANGUAGE/][NAME]]'
- Instead of recoding files, Recode writes a LANGUAGE source file on
- standard output and exits. This source is meant to be included in
- a regular program written in the same programming LANGUAGE: its
- purpose is to declare and initialise an array, named NAME, which
- represents the requested recoding. The only acceptable values for
- LANGUAGE are 'c' or 'perl', and may may be abbreviated. If
- LANGUAGE is not specified, 'c' is assumed. If NAME is not
- specified, then it defaults to 'BEFORE_AFTER'. Strings BEFORE and
- AFTER are cleaned before being used according to the syntax of
- LANGUAGE.
-
- Even if Recode tries its best, this option does not always succeed
- in producing the requested source table, it then prints 'Recoding
- is too complex for a mere table'. It will succeed however,
- provided the recoding can be internally represented by only one
- step after the optimisation phase, and if this merged step conveys
- a one-to-one or a one-to-many explicit table. To increase the
- probability that this happens, 'iconv' initialisation is currently
- inhibited whenever this option is used. Also, when attempting to
- produce sources tables, Recode relaxes its checking a tiny bit: it
- ignores the algorithmic part of some tabular recodings, it also
- avoids the processing of implied surfaces. But this is all fairly
- technical. Better try and see!
-
- Most tables are produced using decimal numbers to refer to
- character values(1). Yet, users who know all Recode tricks and
- stunts could indeed force octal or hexadecimal output for the table
- contents. For example:
-
- recode ibm297/test8..cp1252/x < /dev/null
-
- produces a sequence of hexadecimal values which represent a
- conversion table from 'IBM297' to 'CP1252'.
-
- Beware that other options might affect the produced source tables,
- these are: '-d', '-g' and, particularly, '-s'.
-
-'-k PAIRS'
-'--known=PAIRS'
- This particular option is meant to help identifying an unknown
- charset, using as hints some already identified characters of the
- charset. Some examples will help introducing the idea.
-
- Let's presume here that Recode is run in an ISO-8859-1 locale, and
- that 'DEFAULT_CHARSET' is unset in the environment. Suppose you
- have guessed that code 130 (decimal) of the unknown charset
- represents a lower case 'e' with an acute accent. That is to say
- that this code should map to code 233 (decimal) in the usual
- charset. By executing:
-
- recode -k 130:233
-
- you should obtain a listing similar to:
-
- AtariST atarist
- CWI cphu cwi cwi2
- IBM437 437 cp437 ibm437
- IBM850 850 cp850 ibm850
- IBM851 851 cp851 ibm851
- IBM852 852 cp852 ibm852
- IBM857 857 cp857 ibm857
- IBM860 860 cp860 ibm860
- IBM861 861 cp861 cpis ibm861
- IBM863 863 cp863 ibm863
- IBM865 865 cp865 ibm865
-
- You can give more than one clue at once, to restrict the list
- further. Suppose you have _also_ guessed that code 211 of the
- unknown charset represents an upper case 'E' with diaeresis, that
- is, code 203 in the usual charset. By requesting:
-
- recode -k 130:233,211:203
-
- you should obtain:
-
- IBM850 850 cp850 ibm850
- IBM852 852 cp852 ibm852
- IBM857 857 cp857 ibm857
-
- The usual charset may be overridden by specifying one non-option
- argument. For example, to request the list of charsets for which
- code 130 maps to code 142 for the Macintosh, you may ask:
-
- recode -k 130:142 mac
-
- and get:
-
- AtariST atarist
- CWI cphu cwi cwi2
- IBM437 437 cp437 ibm437
- IBM850 850 cp850 ibm850
- IBM851 851 cp851 ibm851
- IBM852 852 cp852 ibm852
- IBM857 857 cp857 ibm857
- IBM860 860 cp860 ibm860
- IBM861 861 cp861 cpis ibm861
- IBM863 863 cp863 ibm863
- IBM865 865 cp865 ibm865
-
- which, of course, is identical to the result of the first example,
- since the code 142 for the Macintosh is a small 'e' with acute.
-
- More formally, option '-k' lists all possible _before_ charsets for
- the _after_ charset given as the sole non-option argument to
- 'recode', but subject to restrictions given in PAIRS. If there is
- no non-option argument, the _after_ charset is taken to be the
- default charset for this 'recode'.
-
- The restrictions are given as a comma separated list of pairs, each
- pair consisting of two numbers separated by a colon. The numbers
- are taken as decimal when the initial digit is between '1' and '9';
- '0x' starts an hexadecimal number, or else '0' starts an octal
- number. The first number is a code in any _before_ charset, while
- the second number is a code in the specified _after_ charset. If
- the first number would not be transformed into the second number by
- recoding from some _before_ charset to the _after_ charset, then
- this _before_ charset is rejected. A _before_ charset is listed
- only if it is not rejected by any pair. The program will only test
- those _before_ charsets having a tabular style internal description
- (*note Tabular::), so should be the selected _after_ charset.
-
- The produced list is in fact a subset of the list produced by the
- option '-l'. As for option '-l', the non-option argument is
- interpreted as a charset name, possibly abbreviated to any non
- ambiguous prefix.
-
-'-l[FORMAT]'
-'--list[=FORMAT]'
- This option asks for information about all charsets, or about one
- particular charset. No file will be recoded.
-
- If there is no non-option arguments, Recode ignores the FORMAT
- value of the option, it writes a sorted list of charset names on
- standard output, one per line. When a charset name have aliases or
- synonyms, they follow the true charset name on its line, sorted
- from left to right. Each charset or alias is followed by its
- implied surfaces, if any. This list is over two hundred lines. It
- is best used with 'grep -i', as in:
-
- recode -l | grep -i greek
-
- Within a collection of names for a single charset, the Recode
- library distinguishes one of them as being the genuine charset
- name, while the others are said to be aliases. The list normally
- integrates all charsets from the external 'iconv' library, unless
- this is defeated through options like '--ignore=:iconv:' or '-x:'.
- The portable 'libiconv' library relates its own aliases of a same
- charset, and for a given set of aliases, if none of them are known
- to Recode already, then Recode will pick one as being the genuine
- charset. The 'iconv' library within GNU 'libc' makes all aliases
- appear as different charsets, and each will be presented as a
- charset by Recode, unless it is known otherwise.
-
- There might be one non-option argument, in which case it is
- interpreted as a charset name, possibly abbreviated to any non
- ambiguous prefix. This particular usage of the '-l' option is
- obeyed _only_ for charsets having a tabular style internal
- description (*note Tabular::). Even if most charsets have this
- property, some do not, and the option '-l' cannot be used to detail
- these particular charsets. For knowing if a particular charset can
- be listed this way, you should merely try and see if this works.
- The FORMAT value of the option is a keyword from the following
- list. Keywords may be abbreviated by dropping suffix letters, and
- even reduced to the first letter only:
-
- 'decimal'
- This format asks for the production on standard output of a
- concise tabular display of the charset, in which character
- code values are expressed in decimal.
-
- 'octal'
- This format uses octal instead of decimal in the concise
- tabular display of the charset.
-
- 'hexadecimal'
- This format uses hexadecimal instead of decimal in the concise
- tabular display of the charset.
-
- 'full'
- This format requests an extensive display of the charset on
- standard output, using one line per character showing its
- decimal, hexadecimal, octal and 'UCS-2' code values, and also
- a descriptive comment which should be the 10646 name for the
- character.
-
- The descriptive comment is given in English and ASCII, yet if
- the English description is not available but a French one is,
- then the French description is given instead, using Latin-1.
- However, if the 'LANGUAGE' or 'LANG' environment variable
- begins with the letters 'fr', then listing preference goes to
- French when both descriptions are available.
-
- When option '-l' is used together with a CHARSET argument, the
- FORMAT defaults to 'decimal'.
-
-'-T'
-'--find-subsets'
- This option is a maintainer tool for evaluating the redundancy of
- those charsets, in Recode, which are internally represented by an
- 'UCS-2' data table. After the listing has been produced, the
- program exits without doing any recoding. The output is meant to
- be sorted, like this: 'recode -T | sort'. The option triggers
- Recode into comparing all pairs of charsets, seeking those which
- are subsets of others. The concept and results are better
- explained through a few examples. Consider these three sample
- lines from '-T' output:
-
- [ 0] IBM891 == IBM903
- [ 1] IBM1004 < CP1252
- [ 12] INVARIANT < CSA_Z243.4-1985-1
-
- The first line means that 'IBM891' and 'IBM903' are completely
- identical as far as Recode is concerned, so one is fully redundant
- to the other. The second line says that 'IBM1004' is wholly
- contained within 'CP1252', yet there is a single character which is
- in 'CP1252' without being in 'IBM1004'. The third line says that
- 'INVARIANT' is wholly contained within 'CSA_Z243.4-1985-1', but
- twelve characters are in 'CSA_Z243.4-1985-1' without being in
- 'INVARIANT'. The whole output might most probably be reduced and
- made more significant through a transitivity study.
-
- ---------- Footnotes ----------
-
- (1) The author of Recode by far prefer expressing numbers in decimal
-than octal or hexadecimal, as he considers that the current state of
-technology should not force users anymore in such strange things. But
-Unicode people see things differently, to the point Recode cannot escape
-being tainted with some hexadecimal.
-
-\1f
-File: recode.info, Node: Recoding, Next: Reversibility, Prev: Listings, Up: Invoking recode
-
-3.4 Controlling how files are recoded
-=====================================
-
-The following options have the purpose of giving the user some fine
-grain control over the recoding operation themselves.
-
-'-c'
-'--colons'
- With 'Texte' Easy French conventions, use the column ':' instead of
- the double-quote '"' for marking diaeresis. *Note Texte::.
-
-'-g'
-'--graphics'
- This option is only meaningful while getting _out_ of the 'IBM-PC'
- charset. In this charset, characters 176 to 223 are used for
- constructing rulers and boxes, using simple or double horizontal or
- vertical lines. This option forces the automatic selection of
- ASCII characters for approximating these rulers and boxes, at cost
- of making the transformation irreversible. Option '-g' implies
- '-f'.
-
-'-t'
-'--touch'
- The _touch_ option is meaningful only when files are recoded over
- themselves. Without it, the time-stamps associated with files are
- preserved, to reflect the fact that changing the code of a file
- does not really alter its informational contents. When the user
- wants the recoded files to be time-stamped at the recoding time,
- this option inhibits the automatic protection of the time-stamps.
-
-'-v'
-'--verbose'
- Before doing any recoding, the program will first print on the
- 'stderr' stream the list of all intermediate charsets planned for
- recoding, starting with the BEFORE charset and ending with the
- AFTER charset. It also prints an indication of the recoding
- quality, as one of the word 'reversible', 'one to one', 'one to
- many', 'many to one' or 'many to many'.
-
- This information will appear once or twice. It is shown a second
- time only when the optimisation and step merging phase succeeds in
- replacing many single steps by a new one.
-
- This option also has a second effect. The program will print on
- 'stderr' one message per recoded FILE, so as to keep the user
- informed of the progress of its command.
-
- An easy way to know beforehand the sequence or quality of a
- recoding is by using the command such as:
-
- recode -v BEFORE..AFTER < /dev/null
-
- using the fact that, in Recode, an empty input file produces an
- empty output file.
-
-'-x CHARSET'
-'--ignore=CHARSET'
- This option tells the program to ignore any recoding path through
- the specified CHARSET, so disabling any single step using this
- charset as a start or end point. This may be used when the user
- wants to force Recode into using an alternate recoding path (yet
- using chained requests offers a finer control, *note Requests::).
-
- CHARSET may be abbreviated to any unambiguous prefix.
-
-\1f
-File: recode.info, Node: Reversibility, Next: Sequencing, Prev: Recoding, Up: Invoking recode
-
-3.5 Reversibility issues
-========================
-
-The following options are somewhat related to reversibility issues:
-
-'-f'
-'--force'
- With this option, irreversible or otherwise erroneous recodings are
- run to completion, and 'recode' does not exit with a non-zero
- status if it would be only because irreversibility matters. *Note
- Reversibility::.
-
- Without this option, Recode tries to protect you against recoding a
- file irreversibly over itself(1). Whenever an irreversible
- recoding is met, or any other recoding error, 'recode' produces a
- warning on standard error. The current input file does not get
- replaced by its recoded version, and 'recode' then proceeds with
- the recoding of the next file.
-
- When the program is merely used as a filter, standard output will
- have received a partially recoded copy of standard input, up to the
- first error point. After all recodings have been done or
- attempted, and if some recoding has been aborted, 'recode' exits
- with a non-zero status.
-
- In releases of Recode prior to version 3.5, this option was always
- selected, so it was rather meaningless. Nevertheless, users were
- invited to start using '-f' right away in scripts calling Recode
- whenever convenient, in preparation for the current behaviour.
-
-'-q'
-'--quiet'
-'--silent'
- This option has the sole purpose of inhibiting warning messages
- about irreversible recodings, and other such diagnostics. It has
- no other effect, in particular, it does _not_ prevent recodings to
- be aborted or 'recode' to return a non-zero exit status when
- irreversible recodings are met.
-
- This option is set automatically for the children processes, when
- recode splits itself in many collaborating copies. Doing so, the
- diagnostic is issued only once by the parent. See option '-p'.
-
-'-s'
-'--strict'
- By using this option, the user requests that Recode be very strict
- while recoding a file, merely losing in the transformation any
- character which is not explicitly mapped from a charset to another.
- Such a loss is not reversible and so, will bring Recode to fail,
- unless the option '-f' is also given as a kind of counter-measure.
-
- Using '-s' without '-f' might render Recode very susceptible to the
- slighest file abnormalities. Despite the fact that it might be
- irritating to some users, such paranoia is sometimes wanted and
- useful.
-
- Even if Recode tries hard to keep the recodings reversible, you
-should not develop an unconditional confidence in its ability to do so.
-You _ought_ to keep only reasonable expectations about reverse
-recodings. In particular, consider:
-
- * Most transformations are fully reversible for all inputs, but lose
- this property whenever '-s' is specified.
-
- * A few transformations are not meant to be reversible, by design.
-
- * Reversibility sometimes depends on actual file contents and cannot
- be ascertained beforehand, without reading the file.
-
- * Reversibility is never absolute across successive versions of this
- program. Even correcting a small bug in a mapping could induce
- slight discrepancies later.
-
- * Reversibility is easily lost by merging. This is best explained
- through an example. If you reversibly recode a file from charset A
- to charset B, then you reversibly recode the result from charset B
- to charset C, you cannot expect to recover the original file by
- merely recoding from charset C directly to charset A. You will
- instead have to recode from charset C back to charset B, and only
- then from charset B to charset A.
-
- * Faulty files create a particular problem. Consider an example,
- recoding from 'IBM-PC' to 'Latin-1'. End of lines are represented
- as '\r\n' in 'IBM-PC' and as '\n' in 'Latin-1'. There is no way by
- which a faulty 'IBM-PC' file containing a '\n' not preceded by '\r'
- be translated into a 'Latin-1' file, and then back.
-
- * There is another difficulty arising from code equivalences. For
- example, in a 'LaTeX' charset file, the string '\^\i{}' could be
- recoded back and forth through another charset and become '\^{\i}'.
- Even if the resulting file is equivalent to the original one, it is
- not identical.
-
- Unless option '-s' is used, Recode automatically tries to fill
-mappings with invented correspondences, often making them fully
-reversible. This filling is not made at random. The algorithm tries to
-stick to the identity mapping and, when this is not possible, it prefers
-generating many small permutation cycles, each involving only a few
-codes.
-
- For example, here is how 'IBM-PC' code 186 gets translated to
-'control-U' in 'Latin-1'. 'Control-U' is 21. Code 21 is the 'IBM-PC'
-section sign, which is 167 in 'Latin-1'. Recode cannot reciprocate 167
-to 21, because 167 is the masculine ordinal indicator within 'IBM-PC',
-which is 186 in 'Latin-1'. Code 186 within 'IBM-PC' has no 'Latin-1'
-equivalent; by assigning it back to 21, Recode closes this short
-permutation loop.
-
- As a consequence of this map filling, Recode may sometimes produce
-_funny_ characters. They may look annoying, they are nevertheless
-helpful when one changes his (her) mind and wants to revert to the prior
-recoding. If you cannot stand these, use option '-s', which asks for a
-very strict recoding.
-
- This map filling sometimes has a few surprising consequences, which
-some users wrongly interpreted as bugs. Here are two examples.
-
- 1. In some cases, Recode seems to copy a file without recoding it.
- But in fact, it does. Consider a request:
-
- recode l1..us < File-Latin1 > File-ASCII
- cmp File-Latin1 File-ASCII
-
- then 'cmp' will not report any difference. This is quite normal. 'Latin-1'
- gets correctly recoded to ASCII for charsets commonalities (which
- are the first 128 characters, in this case). The remaining last
- 128 'Latin-1' characters have no ASCII correspondent. Instead of
- losing them, Recode elects to map them to unspecified characters of
- ASCII, so making the recoding reversible. The simplest way of
- achieving this is merely to keep those last 128 characters
- unchanged. The overall effect is copying the file verbatim.
-
- If you feel this behaviour is too generous and if you do not wish
- to care about reversibility, simply use option '-s'. By doing so,
- Recode will strictly map only those 'Latin-1' characters which have
- an ASCII equivalent, and will merely drop those which do not.
- Then, there is more chance that you will observe a difference
- between the input and the output file.
-
- 2. Recoding the wrong way could sometimes give the false impression
- that recoding has _almost_ been done properly. Consider the
- requests:
-
- recode 437..l1 < File-Latin1 > Temp1
- recode 437..l1 < Temp1 > Temp2
-
- so declaring wrongly 'File-Latin1' to be an IBM-PC file, and
- recoding to 'Latin-1'. This is surely ill defined and not
- meaningful. Yet, if you repeat this step a second time, you might
- notice that many (not all) characters in 'Temp2' are identical to
- those in 'File-Latin1'. Sometimes, people try to discover how
- Recode works by experimenting a little at random, rather than
- reading and understanding the documentation; results such as this
- are surely confusing, as they provide those people with a false
- feeling that they understood something.
-
- Reversible codings have this property that, if applied several
- times in the same direction, they will eventually bring any
- character back to its original value. Since Recode seeks small
- permutation cycles when creating reversible codings, besides
- characters unchanged by the recoding, most permutation cycles will
- be of length 2, and fewer of length 3, etc. So, it is just
- expectable that applying the recoding twice in the same direction
- will recover most characters, but will fail to recover those
- participating in permutation cycles of length 3. On the other end,
- recoding six times in the same direction would recover all
- characters in cycles of length 1, 2, 3 or 6.
-
- ---------- Footnotes ----------
-
- (1) There are still some cases of ambiguous output which are rather
-difficult to detect, and for which the protection is not active.
-
-\1f
-File: recode.info, Node: Sequencing, Next: Mixed, Prev: Reversibility, Up: Invoking recode
-
-3.6 Selecting sequencing methods
-================================
-
-This program uses a few techniques when it is discovered that many
-passes are needed to comply with the REQUEST. For example, suppose that
-four elementary steps were selected at recoding path optimisation time.
-Then Recode will split itself into four different interconnected tasks,
-logically equivalent to:
-
- STEP1 <INPUT | STEP2 | STEP3 | STEP4 >OUTPUT
-
- The splitting into subtasks is often done using Unix pipes. But the
-splitting may also be completely avoided, and rather simulated by using
-memory buffer, or intermediate files. The various '--sequence=STRATEGY'
-options gives you control over the flow methods, by replacing STRATEGY
-with 'memory', 'pipe' or 'files'. So, these options may be used to
-override the default behaviour, which is also explained below.
-
-'--sequence=memory'
- When the recoding requires a combination of two or more elementary
- recoding steps, this option forces many passes over the data, using
- in-memory buffers to hold all intermediary results.
-
-'-i'
-'--sequence=files'
- When the recoding requires a combination of two or more elementary
- recoding steps, this option forces many passes over the data, using
- intermediate files between passes. This is the default behaviour
- when files are recoded over themselves. If this option is selected
- in filter mode, that is, when the program reads standard input and
- writes standard output, it might take longer for programs further
- down the pipe chain to start receiving some recoded data.
-
-'-p'
-'--sequence=pipe'
- When the recoding requires a combination of two or more elementary
- recoding steps, this option forces the program to fork itself into
- a few copies interconnected with pipes, using the 'pipe(2)' system
- call. All copies of the program operate in parallel. This is the
- default behaviour in filter mode. If this option is used when
- files are recoded over themselves, this should also save disk space
- because some temporary files might not be needed, at the cost of
- more system overhead.
-
- If, at installation time, the 'pipe(2)' call is said to be
- unavailable, selecting option '-p' is equivalent to selecting
- option '-i'. (This happens, for example, on MS-DOS systems.)
-
-\1f
-File: recode.info, Node: Mixed, Next: Emacs, Prev: Sequencing, Up: Invoking recode
-
-3.7 Using mixed charset input
-=============================
-
-In real life and practice, textual files are often made up of many
-charsets at once. Some parts of the file encode one charset, while
-other parts encode another charset, and so forth. Usually, a file does
-not toggle between more than two or three charsets. The means to
-distinguish which charsets are encoded at various places is not always
-available. Recode is able to handle only a few simple cases of mixed
-input.
-
- The default Recode behaviour is to expect pure charset files, to be
-recoded as other pure charset files. However, the following options
-allow for a few precise kinds of mixed charset files.
-
-'-d'
-'--diacritics'
- While converting to or from one of 'HTML' or 'LaTeX' charset, limit
- conversion to some subset of all characters. For 'HTML', limit
- conversion to the subset of all non-ASCII characters. For 'LaTeX',
- limit conversion to the subset of all non-English letters. This is
- particularly useful, for example, when people create what would be
- valid 'HTML', TeX or LaTeX files, if only they were using provided
- sequences for applying diacritics instead of using the
- diacriticised characters directly from the underlying character
- set.
-
- While converting to 'HTML' or 'LaTeX' charset, this option assumes
- that characters not in the said subset are properly coded or
- protected already, Recode then transmit them literally. While
- converting the other way, this option prevents translating back
- coded or protected versions of characters not in the said subset.
- *Note HTML::. *Note LaTeX::.
-
-'-S[LANGUAGE]'
-'--source[=LANGUAGE]'
- The bulk of the input file is expected to be written in 'ASCII',
- except for parts, like comments and string constants, which are
- written using another charset than 'ASCII'. When LANGUAGE is 'c',
- the recoding will proceed only with the contents of comments or
- strings, while everything else will be copied without recoding.
- When LANGUAGE is 'po', the recoding will proceed only within
- translator comments (those having whitespace immediately following
- the initial '#') and with the contents of 'msgstr' strings.
-
- For the above things to work, the non-'ASCII' encoding of the
- comment or string should be such that an 'ASCII' scan will
- successfully find where the comment or string ends.
-
- Even if 'ASCII' is the usual charset for writing programs, some
- compilers are able to directly read other charsets, like 'UTF-8',
- say. There is currently no provision in Recode for reading mixed
- charset sources which are not based on 'ASCII'. It is probable
- that the need for mixed recoding is not as pressing in such cases.
-
- For example, after one does:
-
- recode -Spo pc/..u8 < INPUT.po > OUTPUT.po
-
- file 'OUTPUT.po' holds a copy of 'INPUT.po' in which _only_
- translator comments and the contents of 'msgstr' strings have been
- recoded from the 'IBM-PC' charset to pure 'UTF-8', without
- attempting conversion of end-of-lines. Machine generated comments
- and original 'msgid' strings are not to be touched by this
- recoding.
-
- If LANGUAGE is not specified, 'c' is assumed.
-
-\1f
-File: recode.info, Node: Emacs, Next: Debugging, Prev: Mixed, Up: Invoking recode
-
-3.8 Using Recode within Emacs
-=============================
-
-The fact the 'recode' program acts as a filter, when given no file
-arguments, makes it quite easy to use from within GNU Emacs. For
-example, recoding the whole buffer from the 'IBM-PC' charset to current
-charset (for example, 'UTF-8' on Unix) is easily done with:
-
- C-x h C-u M-| recode ibmpc RET
-
-'C-x h' selects the whole buffer, and 'C-u M-|' filters and replaces the
-current region through the given shell command. Here is another
-example, binding the keys 'C-c T' to the recoding of the current region
-from Easy French to 'Latin-1' (on Unix) and the key 'C-u C-c T' from 'Latin-1'
-(on Unix) to Easy French:
-
- (global-set-key "\C-cT" 'recode-texte)
-
- (defun recode-texte (flag)
- (interactive "P")
- (shell-command-on-region
- (region-beginning) (region-end)
- (concat "recode " (if flag "..txte" "txte")) t)
- (exchange-point-and-mark))
-
-\1f
-File: recode.info, Node: Debugging, Prev: Emacs, Up: Invoking recode
-
-3.9 Debugging considerations
-============================
-
-It is our experience that when Recode does not provide satisfying
-results, either the 'recode' program was not called properly, correct
-results raised some doubts nevertheless, or files to recode were
-somewhat mangled. Genuine bugs are surely possible.
-
- Unless you already are a Recode expert, it might be a good idea to
-quickly revisit the tutorial (*note Tutorial::) or the prior sections in
-this chapter, to make sure that you properly formatted your recoding
-request. In the case you intended to use Recode as a filter, make sure
-that you did not forget to redirect your standard input (through using
-the '<' symbol in the shell, say). Some Recode false mysteries are also
-easily explained, *Note Reversibility::.
-
- For the other cases, some investigation is needed. To illustrate how
-to proceed, let's presume that you want to recode the 'nicepage' file,
-coded 'UTF-8', into 'HTML'. The problem is that the command 'recode
-u8..h nicepage' yields:
-
- recode: Invalid input in step `UTF-8..ISO-10646-UCS-2'
-
- One good trick is to use 'recode' in filter mode instead of in file
-replacement mode, *Note Synopsis::. Another good trick is to use the
-'-v' option asking for a verbose description of the recoding steps. We
-could rewrite our recoding call as 'recode -v u8..h <nicepage', to get
-something like:
-
- Request: UTF-8..:iconv:..ISO-10646-UCS-2..HTML_4.0
- Shrunk to: UTF-8..ISO-10646-UCS-2..HTML_4.0
- [...SOME OUTPUT...]
- recode: Invalid input in step `UTF-8..ISO-10646-UCS-2'
-
- This might help you to better understand what the diagnostic means.
-The recoding request is achieved in two steps, the first recodes 'UTF-8'
-into 'UCS-2', the second recodes 'UCS-2' into 'HTML'. The problem
-occurs within the first of these two steps, and since, the input of this
-step is the input file given to Recode, this is this overall input file
-which seems to be invalid. Also, when used in filter mode, Recode
-processes as much input as possible before the error occurs and sends
-the result of this processing to standard output. Since the standard
-output has not been redirected to a file, it is merely displayed on the
-user screen. By inspecting near the end of the resulting 'HTML' output,
-that is, what was recoding a bit before the recoding was interrupted,
-you may infer about where the error stands in the real 'UTF-8' input
-file.
-
- If you have the proper tools to examine the intermediate recoding
-data, you might also prefer to reduce the problem to a single step to
-better study it. This is what I usually do. For example, the last
-'recode' call above is more or less equivalent to:
-
- recode -v UTF-8..ISO_10646-UCS-2 <nicepage >temporary
- recode -v ISO_10646-UCS-2..HTML_4.0 <temporary
- rm temporary
-
- If you know that the problem is within the first step, you might
-prefer to concentrate on using the first 'recode' line. If you know
-that the problem is within the second step, you might execute the first
-'recode' line once and for all, and then play with the second 'recode'
-call, repeatedly using the 'temporary' file created once by the first
-call.
-
- Note that the '-f' switch may be used to force the production of
-'HTML' output despite invalid input, it might be satisfying enough for
-you, and easier than repairing the input file. That depends on how
-strict you would like to be about the precision of the recoding process.
-
- If you later see that your HTML file begins with '@lt;html@gt;' when
-you expected '<html>', then Recode might have done a bit more that you
-wanted. In this case, your input file was half-'UTF-8', half-'HTML'
-already, that is, a mixed file (*note Mixed::). There is a special '-d'
-switch for this case. So, your might be end up calling 'recode -fd
-nicepage'. Until you are quite sure that you accept overwriting your
-input file whatever what, I recommend that you stick with filter mode.
-
- If, after such experiments, you seriously think that Recode does not
-behave properly, there might be a genuine bug either in the program or
-the library itself, in which case I invite you to to contribute a bug
-report, *Note Contributing::.
-
-\1f
-File: recode.info, Node: Library, Next: Universal, Prev: Invoking recode, Up: Top
-
-4 A recoding library
-********************
-
-The program named 'recode' is just an application of its recoding
-library. The recoding library is available separately for other C
-programs. A good way to acquire some familiarity with the recoding
-library is to get acquainted with the 'recode' program itself.
-
- To use the recoding library once it is installed, a C program needs
-to have the following lines:
-
- #include <stdbool.h>
- #include <recode.h>
-
- const char *program_name;
-
-near its beginning, and the user should have '-lrecode' on the linking
-call, so modules from the recoding library are found.
-
- The 'recode.h' header file uses the Boolean type setup by the system
-header file 'stdbool.h'. This header file, which is now part of C
-standards, does not likely exist everywhere. If you system does not
-offer this system header file yet, the proper compilation of the
-'recode.h' file could be guaranteed through the replacement of the
-inclusion line by:
-
- typedef enum {false = 0, true = 1} bool;
-
- People wanting wider portability, or Autoconf lovers, might arrange
-their 'configure.ac' for being able to write something more general. In
-such contexts, a typical beginning of a program using the Recode library
-might look something like:
-
- #if STDC_HEADERS
- # include <stdlib.h>
- #endif
-
- /* Some systems do not define EXIT_*, even with STDC_HEADERS. */
- #ifndef EXIT_SUCCESS
- # define EXIT_SUCCESS 0
- #endif
- #ifndef EXIT_FAILURE
- # define EXIT_FAILURE 1
- #endif
- /* The following test is to work around the gross typo in systems like Sony
- NEWS-OS Release 4.0C, whereby EXIT_FAILURE is defined to 0, not 1. */
- #if !EXIT_FAILURE
- # undef EXIT_FAILURE
- # define EXIT_FAILURE 1
- #endif
-
- #if HAVE_STDBOOL_H
- # include <stdbool.h>
- #else
- typedef enum {false = 0, true = 1} bool;
- #endif
-
- #include <recode.h>
-
- const char *program_name;
-
- Yet, for the remainder of the discussion below, we will ignore all
-these configuration matters, and merely presume that both 'stdlib.h' and
-'stdbool.h' system header files are available.
-
- The library is still under development. As it stands, it contains
-four identifiable sets of routines: the outer level functions, the
-request level functions, the task level functions and the charset level
-functions. There are discussed in separate sections. For effectively
-using the recoding library in most applications, it should be rarely
-needed to study anything beyond the main initialisation function at
-outer level, and then, various functions at request level.
-
-* Menu:
-
-* Outer level:: Outer level functions
-* Request level:: Request level functions
-* Task level:: Task level functions
-* Charset level:: Charset level functions
-* Errors:: Handling errors
-
-\1f
-File: recode.info, Node: Outer level, Next: Request level, Prev: Library, Up: Library
-
-4.1 Outer level functions
-=========================
-
-The outer level functions mainly prepare the whole recoding library for
-use, or do actions which are unrelated to specific recodings. Here is
-an example of a program which does not really make anything useful.
-
- #include <stdbool.h>
- #include <stdlib.h>
- #include <recode.h>
-
- const char *program_name;
-
- int
- main (int argc, char *const *argv)
- {
- program_name = argv[0];
- RECODE_OUTER outer = recode_new_outer (RECODE_AUTO_ABORT_FLAG);
-
- recode_delete_outer (outer);
- exit (EXIT_SUCCESS);
- }
-
- The header file 'recode.h' declares an opaque 'RECODE_OUTER'
-structure, which the programmer should use for allocating a variable in
-his program (let's assume the programmer is a male, here, no prejudice
-intended). This 'outer' variable is given as a first argument to all
-outer level functions.
-
- The 'RECODE_OUTER' structure is really meant to be initialised only
-once in the life of a program, and terminated with the program itself.
-Program interfaces should pay attention to initialise it only once,
-would it be only for speed considerations. A good deal of overhead goes
-to outer level initialization, and if the outer level was initialized
-afresh for each and every string translated, say, the Recode library
-would appear immensely much slower that it was meant to be!
-
- Because outer level initialization is meant to be done only once, not
-so much attention has been paid to avoid memory leaks at this level
-within Recode. This is hardly a reason for not plugging such leaks at
-any level: in the long run, they should all be chased and repaired.
-
- * Initialisation functions
-
- RECODE_OUTER recode_new_outer (FLAGS);
- bool recode_delete_outer (OUTER);
-
- The recoding library absolutely needs to be initialised before
- being used, and 'recode_new_outer' has to be called once, first.
- Besides the OUTER it is meant to initialise, the function accepts
- an integer value holding zero or more flags. If no flags, use '0'.
- If more than one flag, they should be combined with the bitwise-or
- ('|') operator. The possible flags are:
-
- 'RECODE_AUTO_ABORT_FLAG'
-
- When this flag is set, the library later issues diagnostics
- itself, and aborts the calling program on errors. This is
- merely a convenience, because if this flag was not given, the
- calling program should always take care of checking the return
- value of all other calls to the recoding library functions,
- and when any error is detected, issue a diagnostic and abort
- processing itself.
-
- 'RECODE_NO_ICONV_FLAG'
-
- When this flag is set, the library does not initialize nor use
- the external 'iconv' library. This means that the charsets
- and aliases provided by the 'iconv' external library and not
- by Recode itself are not available.
-
- In previous incatations of the Recode library, FLAGS was a Boolean
- instead of a collection of flags, meant to set
- 'RECODE_AUTO_ABORT_FLAG'. This still works, but is deprecated.
-
- Regardless of the setting of 'RECODE_AUTO_ABORT', all recoding
- library functions return a success status. Most functions are
- geared for returning 'false' for an error, and 'true' if everything
- went fine. Functions returning structures or strings return 'NULL'
- instead of the result, when the result cannot be produced. If
- RECODE_AUTO_ABORT is selected, functions either return 'true', or
- do not return at all.
-
- As in the example above, 'recode_new_outer' is called only once in
- most cases. Calling 'recode_new_outer' implies some overhead, so
- calling it more than once should preferably be avoided.
-
- The termination function 'recode_delete_outer' reclaims the memory
- allocated by 'recode_new_outer' for a given OUTER variable.
- Calling 'recode_delete_outer' prior to program termination is more
- aesthetic then useful, as all memory resources are automatically
- reclaimed when the program ends. You may spare this terminating
- call if you prefer.
-
- * The 'program_name' declaration
-
- As we just explained, the user may set the Recode library so that,
- in case of problems error, it issues the diagnostic itself and
- aborts the whole processing. This capability may be quite
- convenient. When this feature is used, the aborting routine
- includes the name of the running program in the diagnostic. On the
- other hand, when this feature is not used, the library merely
- return error codes, giving the library user fuller control over all
- this. This behaviour is more like what usual libraries do: they
- return codes and never abort. However, I would rather not force
- library users to necessarily check all return codes themselves, by
- leaving no other choice. In most simple applications, letting the
- library diagnose and abort is much easier, and quite welcome. This
- is precisely because both possibilities exist that the
- 'program_name' variable is needed: it may be used by the library
- _when_ the user sets it to diagnose itself.
-
-\1f
-File: recode.info, Node: Request level, Next: Task level, Prev: Outer level, Up: Library
-
-4.2 Request level functions
-===========================
-
-The request level functions are meant to cover most recoding needs
-programmers may have; they should provide all usual functionality.
-Their API is almost stable by now.
-
- To get started with request level functions, here is a full example
-of a program which sole job is to filter 'ibmpc' code on its standard
-input into 'latin1' code on its standard output.
-
- #include <stdbool.h>
- #include <stdio.h>
- #include <stdlib.h>
- #include <recode.h>
-
- const char *program_name;
-
- int
- main (int argc, char *const *argv)
- {
- program_name = argv[0];
- RECODE_OUTER outer = recode_new_outer (true);
- RECODE_REQUEST request = recode_new_request (outer);
- bool success;
-
- recode_scan_request (request, "ibmpc..latin1");
-
- success = recode_file_to_file (request, stdin, stdout);
-
- recode_delete_request (request);
- recode_delete_outer (outer);
-
- exit (success ? EXIT_SUCCESS : EXIT_FAILURE);
- }
-
- The header file 'recode.h' declares a 'RECODE_REQUEST' structure,
-which the programmer should use for allocating a variable in his
-program. This REQUEST variable is given as a first argument to all
-request level functions, and in most cases, may be considered as opaque.
-
- Suppose an application is doing a lot of recoding using only a few
-different requests. For speed considerations, the 'RECODE_REQUEST'
-structure should ideally be cached for each kind of request, so the
-request level initialisation is not redone for each and every string
-translated. The speedup should be more apparent when Recode is able to
-optimize the work by building on the fly, within the structure, new
-specialized recoding steps and their associated data tables.
-
- * Initialisation functions
-
- RECODE_REQUEST recode_new_request (OUTER);
- bool recode_delete_request (REQUEST);
-
- No REQUEST variable may not be used in other request level
- functions of the recoding library before having been initialised by
- 'recode_new_request'. There may be many such REQUEST variables, in
- which case, they are independent of one another and they all need
- to be initialised separately. To avoid memory leaks, a REQUEST
- variable should not be initialised a second time without calling
- 'recode_delete_request' to "un-initialise" it.
-
- Like for 'recode_delete_outer', calling 'recode_delete_request'
- prior to program termination, in the example above, may be left
- out.
-
- * Fields of 'struct recode_request'
-
- Here are the fields of a 'struct recode_request' which may be
- meaningfully changed, once a REQUEST has been initialised by
- 'recode_new_request', but before it gets used. It is not very
- frequent, in practice, that these fields need to be changed. To
- access the fields, you need to include 'recodext.h' _instead_ of
- 'recode.h', in which case there also is a greater chance that you
- need to recompile your programs if a new version of the recoding
- library gets installed.
-
- 'verbose_flag'
- This field is initially 'false'. When set to 'true', the
- library will echo to stderr the sequence of elementary
- recoding steps needed to achieve the requested recoding.
-
- 'diaeresis_char'
- This field is initially the ASCII value of a double quote '"',
- but it may also be the ASCII value of a colon ':'. In 'texte'
- charset, some countries use double quotes to mark diaeresis,
- while other countries prefer colons. This field contains the
- diaeresis character for the 'texte' charset.
-
- 'make_header_flag'
- This field is initially 'false'. When set to 'true', it
- indicates that the program is merely trying to produce a
- recoding table in source form rather than completing any
- actual recoding. In such a case, the optimisation of step
- sequence can be attempted much more aggressively. If the step
- sequence cannot be reduced to a single step, table production
- will fail.
-
- 'diacritics_only'
- This field is initially 'false'. For 'HTML' and 'LaTeX'
- charset, it is often convenient to recode the diacriticized
- characters only, while just not recoding other HTML code using
- ampersands or angular brackets, or LaTeX code using
- backslashes. Set the field to 'true' for getting this
- behaviour. In the other charset, one can edit text as well as
- HTML or LaTeX directives.
-
- 'ascii_graphics'
- This field is initially 'false', and relate to characters 176
- to 223 in the 'ibmpc' charset, which are use to draw boxes.
- When set to 'true', while getting out of 'ibmpc', ASCII
- characters are selected so to graphically approximate these
- boxes.
-
- * Study of request strings
-
- bool recode_scan_request (REQUEST, "STRING");
-
- The main role of a REQUEST variable is to describe a set of
- recoding transformations. Function 'recode_scan_request' studies
- the given STRING, and stores an internal representation of it into
- REQUEST. Note that STRING may be a full-fledged Recode request,
- possibly including surfaces specifications, intermediary charsets,
- sequences, aliases or abbreviations (*note Requests::).
-
- The internal representation automatically receives some
- pre-conditioning and optimisation, so the REQUEST may then later be
- used many times to achieve many actual recodings. It would not be
- efficient calling 'recode_scan_request' many times with the same
- STRING, it is better having many REQUEST variables instead.
-
- * Actual recoding jobs
-
- Once the REQUEST variable holds the description of a recoding
- transformation, a few functions use it for achieving an actual
- recoding. Either input or output of a recoding may be string, an
- in-memory buffer, or a file.
-
- Functions with names like 'recode_INPUT-TYPE_to_OUTPUT-TYPE'
- request an actual recoding, and are described below. It is easy to
- remember which arguments each function accepts, once grasped some
- simple principles for each possible TYPE. However, one of the
- recoding function escapes these principles and is discussed
- separately, first.
-
- recode_string (REQUEST, STRING);
-
- The function 'recode_string' recodes STRING according to REQUEST,
- and directly returns the resulting recoded string freshly
- allocated, or 'NULL' if the recoding could not succeed for some
- reason. When this function is used, it is the responsibility of
- the programmer to ensure that the memory used by the returned
- string is later reclaimed.
-
- char *recode_string_to_buffer (REQUEST,
- INPUT_STRING,
- &OUTPUT_BUFFER, &OUTPUT_LENGTH, &OUTPUT_ALLOCATED);
- bool recode_string_to_file (REQUEST,
- INPUT_FILE,
- OUTPUT_FILE);
- bool recode_buffer_to_buffer (REQUEST,
- INPUT_BUFFER, INPUT_LENGTH,
- &OUTPUT_BUFFER, &OUTPUT_LENGTH, &OUTPUT_ALLOCATED);
- bool recode_buffer_to_file (REQUEST,
- INPUT_BUFFER, INPUT_LENGTH,
- OUTPUT_FILE);
- bool recode_file_to_buffer (REQUEST,
- INPUT_FILE,
- &OUTPUT_BUFFER, &OUTPUT_LENGTH, &OUTPUT_ALLOCATED);
- bool recode_file_to_file (REQUEST,
- INPUT_FILE,
- OUTPUT_FILE);
-
- All these functions return a 'bool' result, 'false' meaning that
- the recoding was not successful, often because of reversibility
- issues. The name of the function well indicates on which types it
- reads and which type it produces. Let's discuss these three types
- in turn.
-
- string
-
- A string is merely an in-memory buffer which is terminated by
- a 'NUL' character (using as many bytes as needed), instead of
- being described by a byte length. For input, a pointer to the
- buffer is given through one argument.
-
- It is notable that there is no 'to_string' functions. Only
- one function recodes into a string, and it is 'recode_string',
- which has already been discussed separately, above.
-
- buffer
-
- A buffer is a sequence of bytes held in computer memory. For
- input, two arguments provide a pointer to the start of the
- buffer and its byte size. Note that for charsets using many
- bytes per character, the size is given in bytes, not in
- characters.
-
- For output, three arguments provide the address of three
- variables, which will receive the buffer pointer, the used
- buffer size in bytes, and the allocated buffer size in bytes.
- If at the time of the call, the buffer pointer is 'NULL', then
- the allocated buffer size should also be zero, and the buffer
- will be allocated afresh by the recoding functions. However,
- if the buffer pointer is not 'NULL', it should be already
- allocated, the allocated buffer size then gives its size. If
- the allocated size gets exceeded while the recoding goes, the
- buffer will be automatically reallocated bigger, probably
- elsewhere, and the allocated buffer size will be adjusted
- accordingly.
-
- The second variable, giving the in-memory buffer size, will
- receive the exact byte size which was needed for the recoding.
- A 'NUL' character is guaranteed at the end of the produced
- buffer, but is not counted in the byte size of the recoding.
- Beyond that 'NUL', there might be some extra space after the
- recoded data, extending to the allocated buffer size.
-
- file
-
- A file is a sequence of bytes held outside computer memory,
- but buffered through it. For input, one argument provides a
- pointer to a file already opened for read. The file is then
- read and recoded from its current position until the end of
- the file, effectively swallowing it in memory if the
- destination of the recoding is a buffer. For reading a file
- filtered through the recoding library, but only a little bit
- at a time, one should rather use 'recode_filter_open' and
- 'recode_filter_close' (these two functions are not yet
- available).
-
- For output, one argument provides a pointer to a file already
- opened for write. The result of the recoding is written to
- that file starting at its current position.
-
- The following special function is still subject to change:
-
- void recode_format_table (REQUEST, LANGUAGE, "NAME");
-
-and is not documented anymore for now.
-
-\1f
-File: recode.info, Node: Task level, Next: Charset level, Prev: Request level, Up: Library
-
-4.3 Task level functions
-========================
-
-The task level functions are used internally by the request level
-functions, they allow more explicit control over files and memory
-buffers holding input and output to recoding processes. The interface
-specification of task level functions is still subject to change a bit.
-
- To get started with task level functions, here is a full example of a
-program which sole job is to filter 'ibmpc' code on its standard input
-into 'latin1' code on its standard output. That is, this program has
-the same goal as the one from the previous section, but does its things
-a bit differently.
-
- #include <stdbool.h>
- #include <stdlib.h>
- #include <recodext.h>
-
- const char *program_name;
-
- int
- main (int argc, char *const *argv)
- {
- program_name = argv[0];
- RECODE_OUTER outer = recode_new_outer (false);
- RECODE_REQUEST request = recode_new_request (outer);
- RECODE_TASK task;
- bool success;
-
- recode_scan_request (request, "ibmpc..latin1");
-
- task = recode_new_task (request);
- task->input.name = "";
- task->output.name = "";
- success = recode_perform_task (task);
-
- recode_delete_task (task);
- recode_delete_request (request);
- recode_delete_outer (outer);
-
- exit (success ? EXIT_SUCCESS : EXIT_FAILURE);
- }
-
- Note that in the example above, 'recodext.h' header is used instead
-of 'recode.h'. By doing so, the various structures are not opaque
-anymore, and their fields may be accessed by name.
-
- The header file 'recode.h' declares a 'RECODE_TASK' structure, which
-the programmer should use for allocating a variable in his program.
-This 'task' variable is given as a first argument to all task level
-functions. The programmer ought to change and possibly consult a few
-fields in this structure, using special functions.
-
- * Initialisation functions
-
- RECODE_TASK recode_new_task (REQUEST);
- bool recode_delete_task (TASK);
-
- No TASK variable may be used in other task level functions of the
- recoding library without having first been initialised with
- 'recode_new_task'. There may be many such TASK variables, in which
- case, they are independent of one another and they all need to be
- initialised separately. To avoid memory leaks, a TASK variable
- should not be initialised a second time without calling
- 'recode_delete_task' to "un-initialise" it. This function also
- accepts a REQUEST argument and associates the request to the task.
- In fact, a task is essentially a set of recoding transformations
- with the specification for its current input and its current
- output.
-
- The REQUEST variable may be scanned before or after the call to
- 'recode_new_task', it does not matter so far. Immediately after
- initialisation, before further changes, the TASK variable
- associates REQUEST empty in-memory buffers for both input and
- output. The output buffer will later get allocated automatically
- on the fly, as needed, by various task processors.
-
- Even if a call to 'recode_delete_task' is not strictly mandatory
- before ending the program, it is cleaner to always include it.
- Moreover, in some future version of the recoding library, it might
- become required.
-
- * Fields of 'struct task_request'
-
- Here are the fields of a 'struct task_request' which may be
- meaningfully changed, once a TASK has been initialised by
- 'recode_new_task'. In fact, fields are expected to change. Once
- again, to access the fields, you need to include 'recodext.h'
- _instead_ of 'recode.h', in which case there also is a greater
- chance that you need to recompile your programs if a new version of
- the recoding library gets installed.
-
- 'request'
-
- The field 'request' points to the current recoding request,
- but may be changed as needed between recoding calls, for
- example when there is a need to achieve the construction of a
- resulting text made up of many pieces, each being recoded
- differently.
-
- 'input.name'
- 'input.file'
-
- If 'input.name' is not 'NULL' at start of a recoding, this is
- a request that a file by that name be first opened for reading
- and later automatically closed once the whole file has been
- read. If the file name is not 'NULL' but an empty string, it
- means that standard input is to be used. The opened file
- pointer is then held into 'input.file'.
-
- If 'input.name' is 'NULL' and 'input.file' is not, than
- 'input.file' should point to a file already opened for read,
- which is meant to be recoded.
-
- 'input.buffer'
- 'input.cursor'
- 'input.limit'
-
- When both 'input.name' and 'input.file' are 'NULL', three
- pointers describe an in-memory buffer containing the text to
- be recoded. The buffer extends from 'input.buffer' to
- 'input.limit', yet the text to be recoded only extends from
- 'input.cursor' to 'input.limit'. In most situations,
- 'input.cursor' starts with the value that 'input.buffer' has.
- (Its value will internally advance as the recoding goes, until
- it reaches the value of 'input.limit'.)
-
- 'output.name'
- 'output.file'
-
- If 'output.name' is not 'NULL' at start of a recoding, this is
- a request that a file by that name be opened for write and
- later automatically closed after the recoding is done. If the
- file name is not 'NULL' but an empty string, it means that
- standard output is to be used. The opened file pointer is
- then held into 'output.file'. If several passes with
- intermediate files are needed to produce the recoding, the
- 'output.name' file is opened only for the final pass.
-
- If 'output.name' is 'NULL' and 'output.file' is not, then
- 'output.file' should point to a file already opened for write,
- which will receive the result of the recoding.
-
- 'output.buffer'
- 'output.cursor'
- 'output.limit'
-
- When both 'output.name' and 'output.file' are 'NULL', three
- pointers describe an in-memory buffer meant to receive the
- text, once it is recoded. The buffer is already allocated
- from 'output.buffer' to 'output.limit'. In most situations,
- 'output.cursor' starts with the value that 'output.buffer'
- has. Once the recoding is done, 'output.cursor' will point at
- the next free byte in the buffer, just after the recoded text,
- so another recoding could be called without changing any of
- these three pointers, for appending new information to it.
- The number of recoded bytes in the buffer is the difference
- between 'output.cursor' and 'output.buffer'.
-
- Each time 'output.cursor' reaches 'output.limit', the buffer
- is reallocated bigger, possibly at a different location in
- memory, always held up-to-date in 'output.buffer'. It is
- still possible to call a task level function with no output
- buffer at all to start with, in which case all three fields
- should have 'NULL' as a value. This is the situation
- immediately after a call to 'recode_new_task'.
-
- 'strategy'
- This field, which is of type 'enum recode_sequence_strategy',
- tells how various recoding steps (passes) will be
- interconnected. Its initial value is
- 'RECODE_STRATEGY_UNDECIDED', which is a constant defined in
- the header file 'recodext.h'. Other possible values are:
-
- 'RECODE_SEQUENCE_IN_MEMORY'
- Keep intermediate recodings in memory.
- 'RECODE_SEQUENCE_WITH_FILES'
- Do not fork, use intermediate files.
- 'RECODE_SEQUENCE_WITH_PIPE'
- Fork processes connected with 'pipe(2)'.
-
- The best for now is to leave this field alone, and let the
- recoding library decide its strategy, as many combinations
- have not been tested yet.
-
- 'byte_order_mark'
- This field, which is preset to 'true', indicates that a byte
- order mark is to be expected at the beginning of any canonical
- 'UCS-2' or 'UTF-16' text, and that such a byte order mark
- should be also produced for these charsets.
-
- 'fail_level'
- This field, which is of type 'enum recode_error' (*note
- Errors::), sets the error level at which task level functions
- should report a failure. If an error being detected is equal
- or greater than 'fail_level', the function will eventually
- return 'false' instead of 'true'. The preset value for this
- field is 'RECODE_NOT_CANONICAL', that means that if not reset
- to another value, the library will report failure on _any_
- error.
-
- 'abort_level'
- This field, which is of type 'enum recode_error' (*note
- Errors::), sets the error level at which task level functions
- should immediately interrupt their processing. If an error
- being detected is equal or greater than 'abort_level', the
- function returns immediately, but the returned value ('true'
- or 'false') is still is decided from the setting of
- 'fail_level', not 'abort_level'. The preset value for this
- field is 'RECODE_MAXIMUM_ERROR', that means that is not reset
- to another value, the library will never interrupt a recoding
- task.
-
- 'error_so_far'
- This field, which is of type 'enum recode_error' (*note
- Errors::), maintains the maximum error level met so far while
- the recoding task was proceeding. The preset value is
- 'RECODE_NO_ERROR'.
-
- * Task execution
-
- recode_perform_task (TASK);
- recode_filter_open (TASK, FILE);
- recode_filter_close (TASK);
-
- The function 'recode_perform_task' reads as much input as possible,
- and recode all of it on prescribed output, given a properly
- initialised TASK.
-
- Functions 'recode_filter_open' and 'recode_filter_close' are only
- planned for now. They are meant to read input in piecemeal ways.
- Even if functionality already exists informally in the library, it
- has not been made available yet through such interface functions.
-
-\1f
-File: recode.info, Node: Charset level, Next: Errors, Prev: Task level, Up: Library
-
-4.4 Charset level functions
-===========================
-
-Many functions are internal to the recoding library. Some of them have
-been made external and available, for the 'recode' program had to retain
-all its previous functionality while being transformed into a mere
-application of the recoding library. These functions are not really
-documented here for the time being, as we hope that many of them will
-vanish over time. When this set of routines will stabilise, it would be
-convenient to document them as an API for handling charset names and
-contents.
-
- RECODE_CHARSET find_charset (NAME, CLEANING-TYPE);
- bool list_all_charsets (CHARSET);
- bool list_concise_charset (CHARSET, LIST-FORMAT);
- bool list_full_charset (CHARSET);
-
-\1f
-File: recode.info, Node: Errors, Prev: Charset level, Up: Library
-
-4.5 Handling errors
-===================
-
-The 'recode' program, while using the Recode library, needs to control
-whether recoding problems are reported or not, and then reflect these in
-the exit status. The program should also instruct the library whether
-the recoding should be abruptly interrupted when an error is met (so
-sparing processing when it is known in advance that a wrong result would
-be discarded anyway), or if it should proceed nevertheless. Here is how
-the library groups errors into levels, listed here in order of
-increasing severity.
-
-'RECODE_NO_ERROR'
-
- No error was met on previous library calls.
-
-'RECODE_NOT_CANONICAL'
-
- The input text was using one of the many alternative codings for
- some phenomenon, but not the one Recode would have canonically
- generated. So, if the reverse recoding is later attempted, it
- would produce a text having the same _meaning_ as the original
- text, yet not being byte identical.
-
- For example, a 'Base64' block in which end-of-lines appear
- elsewhere that at every 76 characters is not canonical. An
- e-circumflex in TeX which is coded as '\^{e}' instead of '\^e' is
- not canonical.
-
-'RECODE_AMBIGUOUS_OUTPUT'
-
- It has been discovered that if the reverse recoding was attempted
- on the text output by this recoding, we would not obtain the
- original text, only because an ambiguity was generated by accident
- in the output text. This ambiguity would then cause the wrong
- interpretation to be taken.
-
- Here are a few examples. If the 'Latin-1' sequence 'e^' is
- converted to Easy French and back, the result will be interpreted
- as e-circumflex and so, will not reflect the intent of the original
- two characters. Recoding an 'IBM-PC' text to 'Latin-1' and back,
- where the input text contained an isolated 'LF', will have a
- spurious 'CR' inserted before the 'LF'.
-
- Currently, there are many cases in the library where the production
- of ambiguous output is not properly detected, as it is sometimes a
- difficult problem to accomplish this detection, or to do it
- speedily.
-
-'RECODE_UNTRANSLATABLE'
-
- One or more input character could not be recoded, because there is
- just no representation for this character in the output charset.
-
- Here are a few examples. Non-strict mode often allows Recode to
- compute on-the-fly mappings for unrepresentable characters, but
- strict mode prohibits such attribution of reversible translations:
- so strict mode might often trigger such an error. Most 'UCS-2'
- codes used to represent Asian characters cannot be expressed in
- various Latin charsets.
-
-'RECODE_INVALID_INPUT'
-
- The input text does not comply with the coding it is declared to
- hold. So, there is no way by which a reverse recoding would
- reproduce this text, because Recode should never produce invalid
- output.
-
- Here are a few examples. In strict mode, 'ASCII' text is not
- allowed to contain characters with the eight bit set. 'UTF-8'
- encodings ought to be minimal(1).
-
-'RECODE_SYSTEM_ERROR'
-
- The underlying system reported an error while the recoding was
- going on, likely an input/output error. (This error symbol is
- currently unused in the library.)
-
-'RECODE_USER_ERROR'
-
- The programmer or user requested something the recoding library is
- unable to provide, or used the API wrongly. (This error symbol is
- currently unused in the library.)
-
-'RECODE_INTERNAL_ERROR'
-
- Something really wrong, which should normally never happen, was
- detected within the recoding library. This might be due to genuine
- bugs in the library, or maybe due to un-initialised or overwritten
- arguments to the API. (This error symbol is currently unused in the
- library.)
-
-'RECODE_MAXIMUM_ERROR'
-
- This error code should never be returned, it is only internally
- used as a sentinel for the list of all possible error codes.
-
- One should be able to set the error level threshold for returning
-failure at end of recoding, and also the threshold for immediate
-interruption. If many errors occur while the recoding proceed, which
-are not severe enough to interrupt the recoding, then the most severe
-error is retained, while others are forgotten(2). So, in case of an
-error, the possible actions currently are:
-
- * do nothing and let go, returning success at end of recoding,
- * just let go for now, but return failure at end of recoding,
- * interrupt recoding right away and return failure now.
-
-*Note Task level::, and particularly the description of the fields
-'fail_level', 'abort_level' and 'error_so_far', for more information
-about how errors are handled.
-
- ---------- Footnotes ----------
-
- (1) The minimality of an 'UTF-8' encoding is guaranteed on output,
-but currently, it is not checked on input.
-
- (2) Another approach would have been to define the level symbols as
-masks instead, and to give masks to threshold setting routines, and to
-retain all errors--yet I never met myself such a need in practice, and
-so I fear it would be overkill. On the other hand, it might be
-interesting to maintain counters about how many times each kind of error
-occurred.
-
-\1f
-File: recode.info, Node: Universal, Next: iconv, Prev: Library, Up: Top
-
-5 The universal charset
-***********************
-
-Standard ISO 10646 defines a universal character set, intended to
-encompass in the long run all languages written on this planet. It is
-based on wide characters, and offer possibilities for two billion
-characters (2^31).
-
- This charset was to become available in Recode under the name 'UCS',
-with many external surfaces for it. But in the current version, only
-surfaces of 'UCS' are offered, each presented as a genuine charset
-rather than a surface. Such surfaces are only meaningful for the 'UCS'
-charset, so it is not that useful to draw a line between the surfaces
-and the only charset to which they may apply.
-
- 'UCS' stands for Universal Character Set. 'UCS-2' and 'UCS-4' are
-fixed length encodings, using two or four bytes per character
-respectively. 'UTF' stands for 'UCS' Transformation Format, and are
-variable length encodings dedicated to 'UCS'. 'UTF-1' was based on
-ISO 2022, it did not succeed(1). 'UTF-2' replaced it, it has been
-called 'UTF-FSS' (File System Safe) in Unicode or Plan9 context, but is
-better known today as 'UTF-8'. To complete the picture, there is
-'UTF-16' based on 16 bits bytes, and 'UTF-7' which is meant for
-transmissions limited to 7-bit bytes. Most often, one might see 'UTF-8'
-used for external storage, and 'UCS-2' used for internal storage.
-
- When Recode is producing any representation of 'UCS', it uses the
-replacement character 'U+FFFD' for any _valid_ character which is not
-representable in the goal charset(2). This happens, for example, when
-'UCS-2' is not capable to echo a wide 'UCS-4' character, or for a
-similar reason, an 'UTF-8' sequence using more than three bytes. The
-replacement character is meant to represent an existing character. So,
-it is never produced to represent an invalid sequence or ill-formed
-character in the input text. In such cases, Recode just gets rid of the
-noise, while taking note of the error in its usual ways.
-
- Even if 'UTF-8' is an encoding, really, it is the encoding of a
-single character set, and nothing else. It is useful to distinguish
-between an encoding (a _surface_ within Recode) and a charset, but only
-when the surface may be applied to several charsets. Specifying a
-charset is a bit simpler than specifying a surface in a Recode request.
-There would not be a practical advantage at imposing a more complex
-syntax to Recode users, when it is simple to assimilate 'UTF-8' to a
-charset. Similar considerations apply for 'UCS-2', 'UCS-4', 'UTF-16'
-and 'UTF-7'. These are all considered to be charsets.
-
-* Menu:
-
-* UCS-2:: Universal Character Set, 2 bytes
-* UCS-4:: Universal Character Set, 4 bytes
-* UTF-7:: Universal Transformation Format, 7 bits
-* UTF-8:: Universal Transformation Format, 8 bits
-* UTF-16:: Universal Transformation Format, 16 bits
-* count-characters:: Frequency count of characters
-* dump-with-names:: Fully interpreted UCS dump
-
- ---------- Footnotes ----------
-
- (1) It is not probable that Recode will ever support 'UTF-1'.
-
- (2) This is when the goal charset allows for 16-bits. For shorter
-charsets, the '--strict' ('-s') option decides what happens: either the
-character is dropped, or a reversible mapping is produced on the fly.
-
-\1f
-File: recode.info, Node: UCS-2, Next: UCS-4, Prev: Universal, Up: Universal
-
-5.1 Universal Character Set, 2 bytes
-====================================
-
-One surface of 'UCS' is usable for the subset defined by its first sixty
-thousand characters (in fact, 31 * 2^11 codes), and uses exactly two
-bytes per character. It is a mere dump of the internal memory
-representation which is _natural_ for this subset and as such, conveys
-with it endianness problems.
-
- A non-empty 'UCS-2' file normally begins with a so called "byte order
-mark", having value '0xFEFF'. The value '0xFFFE' is not an 'UCS'
-character, so if this value is seen at the beginning of a file, Recode
-reacts by swapping all pairs of bytes. The library also properly reacts
-to other occurrences of '0xFEFF' or '0xFFFE' elsewhere than at the
-beginning, because concatenation of 'UCS-2' files should stay a simple
-matter, but it might trigger a diagnostic about non canonical input.
-
- By default, when producing an 'UCS-2' file, Recode always outputs the
-high order byte before the low order byte. But this could be easily
-overridden through the '21-Permutation' surface (*note Permutations::).
-For example, the command:
-
- recode u8..u2/21 < INPUT > OUTPUT
-
-asks for an 'UTF-8' to 'UCS-2' conversion, with swapped byte output.
-
- Use 'UCS-2' as a genuine charset. This charset is available in
-Recode under the name 'ISO-10646-UCS-2'. Accepted aliases are 'UCS-2',
-'BMP', 'rune' and 'u2'.
-
- The Recode library is able to combine 'UCS-2' some sequences of codes
-into single code characters, to represent a few diacriticized
-characters, ligatures or diphtongs which have been included to ease
-mapping with other existing charsets. It is also able to explode such
-single code characters into the corresponding sequence of codes. The
-request syntax for triggering such operations is rudimentary and
-temporary. The 'combined-UCS-2' pseudo character set is a special form
-of 'UCS-2' in which known combinings have been replaced by the simpler
-code. Using 'combined-UCS-2' instead of 'UCS-2' in an _after_ position
-of a request forces a combining step, while using 'combined-UCS-2'
-instead of 'UCS-2' in a _before_ position of a request forces an
-exploding step. For the time being, one has to resort to advanced
-request syntax to achieve other effects. For example:
-
- recode u8..co,u2..u8 < INPUT > OUTPUT
-
-copies an 'UTF-8' INPUT over OUTPUT, still to be in 'UTF-8', yet merging
-combining characters into single codes whenever possible.
-
-\1f
-File: recode.info, Node: UCS-4, Next: UTF-7, Prev: UCS-2, Up: Universal
-
-5.2 Universal Character Set, 4 bytes
-====================================
-
-Another surface of 'UCS' uses exactly four bytes per character, and is a
-mere dump of the internal memory representation which is _natural_ for
-the whole charset and as such, conveys with it endianness problems.
-
- Use it as a genuine charset. This charset is available in Recode
-under the name 'ISO-10646-UCS-4'. Accepted aliases are 'UCS', 'UCS-4',
-'ISO_10646', '10646' and 'u4'.
-
-\1f
-File: recode.info, Node: UTF-7, Next: UTF-8, Prev: UCS-4, Up: Universal
-
-5.3 Universal Transformation Format, 7 bits
-===========================================
-
-'UTF-7' comes from IETF rather than ISO, and is described by RFC 2152,
-in the MIME series. The 'UTF-7' encoding is meant to fit 'UCS-2' over
-channels limited to seven bits per byte. It proceeds from a mix between
-the spirit of 'Quoted-Printable' and methods of 'Base64', adapted to
-Unicode contexts.
-
- This charset is available in Recode under the name
-'UNICODE-1-1-UTF-7'. Accepted aliases are 'UTF-7', 'TF-7' and 'u7'.
-
-\1f
-File: recode.info, Node: UTF-8, Next: UTF-16, Prev: UTF-7, Up: Universal
-
-5.4 Universal Transformation Format, 8 bits
-===========================================
-
-Even if 'UTF-8' does not originally come from IETF, there is now RFC 2279
-to describe it. In letters sent on 1995-01-21 and 1995-04-20, Markus
-Kuhn writes:
-
- 'UTF-8' is an 'ASCII' compatible multi-byte encoding of the ISO 10646
- universal character set ('UCS'). 'UCS' is a 31-bit superset of all
- other character set standards. The first 256 characters of 'UCS'
- are identical to those of ISO 8859-1 (Latin-1). The 'UCS-2'
- encoding of UCS is a sequence of bigendian 16-bit words, the
- 'UCS-4' encoding is a sequence of bigendian 32-bit words. The
- 'UCS-2' subset of ISO 10646 is also known as "Unicode". As both
- 'UCS-2' and 'UCS-4' require heavy modifications to traditional
- 'ASCII' oriented system designs (e.g. Unix), the 'UTF-8' encoding
- has been designed for these applications.
-
- In 'UTF-8', only 'ASCII' characters are encoded using bytes below
- 128. All other non-ASCII characters are encoded as multi-byte
- sequences consisting only of bytes in the range 128-253. This
- avoids critical bytes like 'NUL' and '/' in 'UTF-8' strings, which
- makes the 'UTF-8' encoding suitable for being handled by the
- standard C string library and being used in Unix file names. Other
- properties include the preserved lexical sorting order and that
- 'UTF-8' allows easy self-synchronisation of software receiving
- 'UTF-8' strings.
-
- 'UTF-8' is the most common external surface of 'UCS', each character
-uses from one to six bytes, and is able to encode all 2^31 characters of
-the 'UCS'. It is implemented as a charset, with the following
-properties:
-
- * Strict 7-bit 'ASCII' is completely invariant under 'UTF-8', and
- those are the only one-byte characters. 'UCS' values and 'ASCII'
- values coincide. No multi-byte characters ever contain bytes less
- than 128. 'NUL' _is_ 'NUL'. A multi-byte character always starts
- with a byte of 192 or more, and is always followed by a number of
- bytes between 128 to 191. That means that you may read at random
- on disk or memory, and easily discover the start of the current,
- next or previous character. You can count, skip or extract
- characters with this only knowledge.
-
- * If you read the first byte of a multi-byte character in binary, it
- contains many '1' bits in successions starting with the most
- significant one (from the left), at least two. The length of this
- '1' sequence equals the byte size of the character. All succeeding
- bytes start by '10'. This is a lot of redundancy, making it fairly
- easy to guess that a file is valid 'UTF-8', or to safely state that
- it is not.
-
- * In a multi-byte character, if you remove all leading '1' bits of
- the first byte of a multi-byte character, and the initial '10' bits
- of all remaining bytes (so keeping 6 bits per byte for those), the
- remaining bits concatenated are the UCS value.
-
-These properties also have a few nice consequences:
-
- * Conversion to/from values is algorithmically simple, and reasonably
- speedy.
-
- * A sequence of N bytes can hold characters needing up to 2 + 5N bits
- in their 'UCS' representation. Here, N is a number between 1 and
- 6. So, 'UTF-8' is most economical when mapping ASCII (1 byte),
- followed by 'UCS-2' (1 to 3 bytes) and 'UCS-4' (1 to 6 bytes).
-
- * The lexicographic sorting order of 'UCS' strings is preserved.
-
- * Bytes with value 254 or 255 never appear, and because of that,
- these are sometimes used when escape mechanisms are needed.
-
- In some case, when little processing is done on a lot of strings, one
-may choose for efficiency reasons to handle 'UTF-8' strings directly
-even if variable length, as it is easy to get start of characters.
-Character insertion or replacement might require moving the remainder of
-the string in either direction. In most cases, it is faster and easier
-to convert from 'UTF-8' to 'UCS-2' or 'UCS-4' prior to processing.
-
- This charset is available in Recode under the name 'UTF-8'. Accepted
-aliases are 'UTF-2', 'UTF-FSS', 'FSS_UTF', 'TF-8' and 'u8'.
-
-\1f
-File: recode.info, Node: UTF-16, Next: count-characters, Prev: UTF-8, Up: Universal
-
-5.5 Universal Transformation Format, 16 bits
-============================================
-
-Another external surface of 'UCS' is also variable length, each
-character using either two or four bytes. It is usable for the subset
-defined by the first million characters (17 * 2^16) of 'UCS'.
-
- Martin J. Du"rst writes (to <comp.std.internat>, on 1995-03-28):
-
- 'UTF-16' is another method that reserves two times 1024 codepoints
- in Unicode and uses them to index around one million additional
- characters. 'UTF-16' is a little bit like former multibyte codes,
- but quite not so, as both the first and the second 16-bit code
- clearly show what they are. The idea is that one million
- codepoints should be enough for all the rare Chinese ideograms and
- historical scripts that do not fit into the Base Multilingual Plane
- of ISO 10646 (with just about 63,000 positions available, now that
- 2,000 are gone).
-
- This charset is available in Recode under the name 'UTF-16'.
-Accepted aliases are 'Unicode', 'TF-16' and 'u6'.
-
-\1f
-File: recode.info, Node: count-characters, Next: dump-with-names, Prev: UTF-16, Up: Universal
-
-5.6 Frequency count of characters
-=================================
-
-A device may be used to obtain a list of characters in a file, and how
-many times each character appears. Each count is followed by the
-'UCS-2' value of the character and, when known, the RFC 1345 mnemonic
-for that character.
-
- This charset is available in Recode under the name
-'count-characters'.
-
- This 'count' feature has been implemented as a charset. This may
-change in some later version, as it would sometimes be convenient to
-count original bytes, instead of their 'UCS-2' equivalent.
-
-\1f
-File: recode.info, Node: dump-with-names, Prev: count-characters, Up: Universal
-
-5.7 Fully interpreted UCS dump
-==============================
-
-Another device may be used to get fully interpreted dumps of an 'UCS-2'
-stream of characters, with one 'UCS-2' character displayed on a full
-output line. Each line receives the RFC 1345 mnemonic for the character
-if it exists, the 'UCS-2' value of the character, and a descriptive
-comment for that character. As each input character produces its own
-output line, beware that the output file from this conversion may be
-much, much bigger than the input file.
-
- This charset is available in Recode under the name 'dump-with-names'.
-
- This 'dump-with-names' feature has been implemented as a charset
-rather than a surface. This is surely debatable. The current
-implementation allows for dumping charsets other than 'UCS-2'. For
-example, the command 'recode l2..full < INPUT' implies a necessary
-conversion from 'Latin-2' to 'UCS-2', as 'dump-with-names' is only
-connected out from 'UCS-2'. In such cases, Recode does not display the
-original 'Latin-2' codes in the dump, only the corresponding 'UCS-2'
-values. To give a simpler example, the command
-
- echo 'Hello, world!' | recode us..dump
-
-produces the following output:
-
- UCS2 Mne Description
-
- 0048 H latin capital letter h
- 0065 e latin small letter e
- 006C l latin small letter l
- 006C l latin small letter l
- 006F o latin small letter o
- 002C , comma
- 0020 SP space
- 0077 w latin small letter w
- 006F o latin small letter o
- 0072 r latin small letter r
- 006C l latin small letter l
- 0064 d latin small letter d
- 0021 ! exclamation mark
- 000A LF line feed (lf)
-
- The descriptive comment is given in English and 'ASCII', yet if the
-English description is not available but a French one is, then the
-French description is given instead, using 'Latin-1'. However, if the
-'LANGUAGE' or 'LANG' environment variable begins with the letters 'fr',
-then listing preference goes to French when both descriptions are
-available.
-
- Here is another example. To get the long description of the code 237
-in Latin-5 table, one may use the following command.
-
- echo -n 237 | recode l5/d..dump
-
-If your 'echo' does not grok '-n', use 'echo 237\c' instead. Here is
-how to see what Unicode 'U+03C6' means, while getting rid of the title
-lines.
-
- echo -n 0x03C6 | recode u2/x2..dump | tail +3
-
-\1f
-File: recode.info, Node: iconv, Next: Tabular, Prev: Universal, Up: Top
-
-6 The 'iconv' library
-*********************
-
-The Recode library is able to use the capabilities of an external,
-pre-installed 'iconv' library, usually as provided by GNU 'libc' or the
-portable 'libiconv' written by Bruno Haible. In fact, many capabilities
-of the Recode library are duplicated in an external 'iconv' library, as
-they likely share many charsets. We discuss, here, the issues related
-to this duplication, and other peculiarities specific to the 'iconv'
-library.
-
- As implemented, if a recoding request can be satisfied by the Recode
-library both with and without using the 'iconv' library, the external
-'iconv' library might be used. To sort out if the 'iconv' is indeed
-used or not, just use the '-v' or '--verbose' option, *note Recoding::,
-and check if ':iconv:' appears as an intermediate charset.
-
- The ':iconv:' charset represents a conceptual pivot charset within
-the external 'iconv' library (in fact, this pivot exists, but is not
-directly reachable). This charset has a ':' (a mere colon) and
-':libiconv:' for aliases. It is not allowed to recode from or to this
-charset directly. But when this charset is selected as an intermediate,
-usually by automatic means, then the external 'iconv' Recode library is
-called to handle the transformations. By using an '--ignore=:iconv:'
-option on the 'recode' call or equivalently, but more simply, '-x:',
-Recode is instructed to fully avoid this charset as an intermediate,
-with the consequence that the external 'iconv' library is defeated.
-Consider these two calls:
-
- recode l1..1250 < INPUT > OUTPUT
- recode -x: l1..1250 < INPUT > OUTPUT
-
-Both should transform INPUT from 'ISO-8859-1' to 'CP1250' on OUTPUT.
-The first call might use the external 'iconv' library, while the second
-call surely avoids it. Whatever the path used, the results should
-normally be identical. However, there might be observable differences.
-Most of them might result from reversibility issues, as the external
-'iconv' engine does not likely address reversibility in the same way.
-Even if much less likely, some differences might result from slight
-errors in the tables used, such differences should then be reported as
-bugs.
-
- Discrepancies might be seen in the area of error detection and
-recovery. The Recode library usually tries to detect canonicity errors
-in input, and production of ambiguous output, but the external 'iconv'
-library does not necessarily do it the same way. Moreover, the Recode
-library may not always recover as nicely as possible when the external
-'iconv' has no translation for a given character.
-
- The external 'iconv' libraries may offer different sets of charsets
-and aliases from one library to another, and also between successive
-versions of a single library. Best is to check the documentation of the
-external 'iconv' library, as of the time Recode was installed, to know
-which charsets and aliases are being provided.
-
- The '--ignore=:iconv:' or '-x:' options might be useful when there is
-a need to make a recoding more exactly repeatable between machines or
-installations, the idea being here to remove the variance possibly
-introduced by the various implementations of an external 'iconv'
-library. These options might also help deciding whether if some
-recoding problem is genuine to Recode, or is induced by the external
-'iconv' library.
-
-\1f
-File: recode.info, Node: Tabular, Next: ASCII misc, Prev: iconv, Up: Top
-
-7 Tabular sources (RFC 1345)
-****************************
-
-An important part of the tabular charset knowledge in Recode comes from RFC 1345
-or, alternatively, from the 'chset' tools, both maintained by Keld
-Simonsen. The RFC 1345 document:
-
- "Character Mnemonics & Character Sets", K. Simonsen, Request for
- Comments no. 1345, Network Working Group, June 1992.
-
-defines many character mnemonics and character sets. The Recode library
-implements most of RFC 1345, however:
-
- * It does not recognise those charsets which overload character
- positions: 'dk-us' and 'us-dk'. However, *Note Mixed::.
-
- * It does not recognise those charsets which combine two characters
- for representing a third: 'ANSI_X3.110-1983', 'ISO_6937-2-add',
- 'T.101-G2', 'T.61-8bit', 'iso-ir-90' and 'videotex-suppl'.
-
- * It does not recognise 16-bits charsets: 'GB_2312-80',
- 'JIS_C6226-1978', 'JIS_C6226-1983', 'JIS_X0212-1990' and
- 'KS_C_5601-1987'.
-
- * It interprets the charset 'isoir91' as 'NATS-DANO' (alias
- 'iso-ir-9-1'), _not_ as 'JIS_C6229-1984-a' (alias 'iso-ir-91'). It
- also interprets the charset 'isoir92' as 'NATS-DANO-ADD' (alias
- 'iso-ir-9-2'), _not_ as 'JIS_C6229-1984-b' (alias 'iso-ir-92'). It
- might be better just avoiding these two alias names.
-
- Keld Simonsen <keld@dkuug.dk> did most of RFC 1345 himself, with some
-funding from Danish Standards and Nordic standards (INSTA) project. He
-also did the character set design work, with substantial input from Olle
-Jaernefors. Keld typed in almost all of the tables, some have been
-contributed. A number of people have checked the tables in various
-ways. The RFC lists a number of people who helped.
-
- Keld and the Recode maintainer have an arrangement by which any new
-discovered information submitted by Recode users, about tabular
-charsets, is forwarded to Keld, eventually merged into Keld's work, and
-only then, reimported into Recode. Recode does not try to compete, nor
-even establish itself as an alternate or diverging reference: RFC 1345
-and its new drafts stay the genuine source for most tabular information
-conveyed by Recode. Keld has been more than collaborative so far, so
-there is no reason that we act otherwise. In a word, Recode should be
-perceived as the application of external references, but not as a
-reference in itself.
-
- Internally, RFC 1345 associates which each character an unambiguous
-mnemonic of a few characters, taken from ISO 646, which is a minimal
-ASCII subset of 83 characters. The charset made up by these mnemonics
-is available in Recode under the name 'RFC1345'. It has 'mnemonic' and
-'1345' for aliases. As implemened, this charset exactly corresponds to
-'mnemonic+ascii+38', using RFC 1345 nomenclature. Roughly said, ISO 646
-characters represent themselves, except for the ampersand ('&') which
-appears doubled. A prefix of a single ampersand introduces a mnemonic.
-For mnemonics using two characters, the prefix is immediately by the
-mnemonic. For longer mnemonics, the prefix is followed by an underline
-('_'), the mmemonic, and another underline. Conversions to this charset
-are usually reversible.
-
- Currently, Recode does not offer any of the many other possible
-variations of this family of representations. They will likely be
-implemented in some future version, however.
-
-'ANSI_X3.4-1968'
- '367', 'ANSI_X3.4-1986', 'ASCII', 'CP367', 'IBM367', 'ISO646-US',
- 'ISO_646.irv:1991', 'US-ASCII', 'iso-ir-6' and 'us' are aliases for
- this charset. Source: ISO 2375 registry.
-
-'ASMO_449'
- 'ISO_9036', 'arabic7' and 'iso-ir-89' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'BS_4730'
- 'ISO646-GB', 'gb', 'iso-ir-4' and 'uk' are aliases for this
- charset. Source: ISO 2375 registry.
-
-'BS_viewdata'
- 'iso-ir-47' is an alias for this charset. Source: ISO 2375
- registry.
-
-'CP1250'
- '1250', 'ms-ee' and 'windows-1250' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'CP1251'
- '1251', 'ms-cyrl' and 'windows-1251' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'CP1252'
- '1252', 'ms-ansi' and 'windows-1252' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'CP1253'
- '1253', 'ms-greek' and 'windows-1253' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'CP1254'
- '1254', 'ms-turk' and 'windows-1254' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'CP1255'
- '1255', 'ms-hebr' and 'windows-1255' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'CP1256'
- '1256', 'ms-arab' and 'windows-1256' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'CP1257'
- '1257', 'WinBaltRim' and 'windows-1257' are aliases for this
- charset. Source: CEN/TC304 N283.
-
-'CSA_Z243.4-1985-1'
- 'ISO646-CA', 'ca', 'csa7-1' and 'iso-ir-121' are aliases for this
- charset. Source: ISO 2375 registry.
-
-'CSA_Z243.4-1985-2'
- 'ISO646-CA2', 'csa7-2' and 'iso-ir-122' are aliases for this
- charset. Source: ISO 2375 registry.
-
-'CSA_Z243.4-1985-gr'
- 'iso-ir-123' is an alias for this charset. Source: ISO 2375
- registry.
-
-'CSN_369103'
- 'KOI-8_L2', 'iso-ir-139' and 'koi8l2' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'CWI'
- 'CWI-2' and 'cp-hu' are aliases for this charset. Source:
- Computerworld Sza'mita'stechnika vol 3 issue 13 1988-06-29.
-
-'DEC-MCS'
- 'dec' is an alias for this charset. VAX/VMS User's Manual, Order
- Number: AI-Y517A-TE, April 1986.
-
-'DIN_66003'
- 'ISO646-DE', 'de' and 'iso-ir-21' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'DS_2089'
- 'DS2089', 'ISO646-DK' and 'dk' are aliases for this charset.
- Source: Danish Standard, DS 2089, February 1974.
-
-'EBCDIC-AT-DE'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-AT-DE-A'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-CA-FR'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-DK-NO'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-DK-NO-A'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-ES'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-ES-A'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-ES-S'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-FI-SE'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-FI-SE-A'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-FR'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-IS-FRISS'
- 'friss' is an alias for this charset. Source: Skyrsuvelar Rikisins
- og Reykjavikurborgar, feb 1982.
-
-'EBCDIC-IT'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-PT'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-UK'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'EBCDIC-US'
- Source: IBM 3270 Char Set Ref Ch 10, GA27-2837-9, April 1987.
-
-'ECMA-cyrillic'
- 'ECMA-113', 'ECMA-113:1986' and 'iso-ir-111' are aliases for this
- charset. Source: ISO 2375 registry.
-
-'ES'
- 'ISO646-ES' and 'iso-ir-17' are aliases for this charset. Source:
- ISO 2375 registry.
-
-'ES2'
- 'ISO646-ES2' and 'iso-ir-85' are aliases for this charset. Source:
- ISO 2375 registry.
-
-'GB_1988-80'
- 'ISO646-CN', 'cn' and 'iso-ir-57' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'GOST_19768-87'
- 'ST_SEV_358-88' and 'iso-ir-153' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'IBM037'
- '037', 'CP037', 'ebcdic-cp-ca', 'ebcdic-cp-nl', 'ebcdic-cp-us' and
- 'ebcdic-cp-wt' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM038'
- '038', 'CP038' and 'EBCDIC-INT' are aliases for this charset.
- Source: IBM 3174 Character Set Ref, GA27-3831-02, March 1990.
-
-'IBM1004'
- '1004', 'CP1004' and 'os2latin1' are aliases for this charset.
- Source: CEN/TC304 N283, 1994-02-04.
-
-'IBM1026'
- '1026' and 'CP1026' are aliases for this charset. Source: IBM NLS
- RM Vol2 SE09-8002-01, March 1990.
-
-'IBM1047'
- '1047' and 'CP1047' are aliases for this charset. Source: IBM
- Character Data Representation Architecture. Registry SC09-1391-00
- p 150.
-
-'IBM256'
- '256', 'CP256' and 'EBCDIC-INT1' are aliases for this charset.
- Source: IBM Registry C-H 3-3220-050.
-
-'IBM273'
- '273' and 'CP273' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM274'
- '274', 'CP274' and 'EBCDIC-BE' are aliases for this charset.
- Source: IBM 3174 Character Set Ref, GA27-3831-02, March 1990.
-
-'IBM275'
- '275', 'CP275' and 'EBCDIC-BR' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM277'
- 'EBCDIC-CP-DK' and 'EBCDIC-CP-NO' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM278'
- '278', 'CP278', 'ebcdic-cp-fi' and 'ebcdic-cp-se' are aliases for
- this charset. Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM280'
- '280', 'CP280' and 'ebcdic-cp-it' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM281'
- '281', 'CP281' and 'EBCDIC-JP-E' are aliases for this charset.
- Source: IBM 3174 Character Set Ref, GA27-3831-02, March 1990.
-
-'IBM284'
- '284', 'CP284' and 'ebcdic-cp-es' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM285'
- '285', 'CP285' and 'ebcdic-cp-gb' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM290'
- '290', 'CP290' and 'EBCDIC-JP-kana' are aliases for this charset.
- Source: IBM 3174 Character Set Ref, GA27-3831-02, March 1990.
-
-'IBM297'
- '297', 'CP297' and 'ebcdic-cp-fr' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM420'
- '420', 'CP420' and 'ebcdic-cp-ar1' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990. IBM NLS RM p
- 11-11.
-
-'IBM423'
- '423', 'CP423' and 'ebcdic-cp-gr' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM424'
- '424', 'CP424' and 'ebcdic-cp-he' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM437'
- '437' and 'CP437' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM500'
- '500', '500V1', 'CP500', 'ebcdic-cp-be' and 'ebcdic-cp-ch' are
- aliases for this charset. Source: IBM NLS RM Vol2 SE09-8002-01,
- March 1990.
-
-'IBM850'
- '850' and 'CP850' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990. Source: UNICODE 1.0.
-
-'IBM851'
- '851' and 'CP851' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM852'
- '852', 'CP852', 'pcl2' and 'pclatin2' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM855'
- '855' and 'CP855' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM857'
- '857' and 'CP857' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM860'
- '860' and 'CP860' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM861'
- '861', 'CP861' and 'cp-is' are aliases for this charset. Source:
- IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM862'
- '862' and 'CP862' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM863'
- '863' and 'CP863' are aliases for this charset. Source: IBM
- Keyboard layouts and code pages, PN 07G4586 June 1991.
-
-'IBM864'
- '864' and 'CP864' are aliases for this charset. Source: IBM
- Keyboard layouts and code pages, PN 07G4586 June 1991.
-
-'IBM865'
- '865' and 'CP865' are aliases for this charset. Source: IBM DOS
- 3.3 Ref (Abridged), 94X9575 (Feb 1987).
-
-'IBM868'
- '868', 'CP868' and 'cp-ar' are aliases for this charset. Source:
- IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM869'
- '869', 'CP869' and 'cp-gr' are aliases for this charset. Source:
- IBM Keyboard layouts and code pages, PN 07G4586 June 1991.
-
-'IBM870'
- '870', 'CP870', 'ebcdic-cp-roece' and 'ebcdic-cp-yu' are aliases
- for this charset. Source: IBM NLS RM Vol2 SE09-8002-01, March
- 1990.
-
-'IBM871'
- '871', 'CP871' and 'ebcdic-cp-is' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM875'
- '875', 'CP875' and 'EBCDIC-Greek' are aliases for this charset.
- Source: UNICODE 1.0.
-
-'IBM880'
- '880', 'CP880' and 'EBCDIC-Cyrillic' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IBM891'
- '891' and 'CP891' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM903'
- '903' and 'CP903' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM904'
- '904' and 'CP904' are aliases for this charset. Source: IBM NLS RM
- Vol2 SE09-8002-01, March 1990.
-
-'IBM905'
- '905', 'CP905' and 'ebcdic-cp-tr' are aliases for this charset.
- Source: IBM 3174 Character Set Ref, GA27-3831-02, March 1990.
-
-'IBM918'
- '918', 'CP918' and 'ebcdic-cp-ar2' are aliases for this charset.
- Source: IBM NLS RM Vol2 SE09-8002-01, March 1990.
-
-'IEC_P27-1'
- 'iso-ir-143' is an alias for this charset. Source: ISO 2375
- registry.
-
-'INIS'
- 'iso-ir-49' is an alias for this charset. Source: ISO 2375
- registry.
-
-'INIS-8'
- 'iso-ir-50' is an alias for this charset. Source: ISO 2375
- registry.
-
-'INIS-cyrillic'
- 'iso-ir-51' is an alias for this charset. Source: ISO 2375
- registry.
-
-'INVARIANT'
- 'iso-ir-170' is an alias for this charset.
-
-'ISO-8859-1'
- '819', 'CP819', 'IBM819', 'ISO8859-1', 'ISO_8859-1',
- 'ISO_8859-1:1987', 'iso-ir-100', 'l1' and 'latin1' are aliases for
- this charset. Source: ISO 2375 registry.
-
-'ISO-8859-10'
- 'ISO8859-10', 'ISO_8859-10', 'ISO_8859-10:1993', 'L6', 'iso-ir-157'
- and 'latin6' are aliases for this charset. Source: ISO 2375
- registry.
-
-'ISO-8859-13'
- 'ISO8859-13', 'ISO_8859-13', 'ISO_8859-13:1998', 'iso-baltic',
- 'iso-ir-179a', 'l7' and 'latin7' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'ISO-8859-14'
- 'ISO8859-14', 'ISO_8859-14', 'ISO_8859-14:1998', 'iso-celtic',
- 'iso-ir-199', 'l8' and 'latin8' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'ISO-8859-15'
- 'ISO8859-15', 'ISO_8859-15', 'ISO_8859-15:1998', 'iso-ir-203', 'l9'
- and 'latin9' are aliases for this charset. Source: ISO 2375
- registry.
-
-'ISO-8859-2'
- '912', 'CP912', 'IBM912', 'ISO8859-2', 'ISO_8859-2',
- 'ISO_8859-2:1987', 'iso-ir-101', 'l2' and 'latin2' are aliases for
- this charset. Source: ISO 2375 registry.
-
-'ISO-8859-3'
- 'ISO8859-3', 'ISO_8859-3', 'ISO_8859-3:1988', 'iso-ir-109', 'l3'
- and 'latin3' are aliases for this charset. Source: ISO 2375
- registry.
-
-'ISO-8859-4'
- 'ISO8859-4', 'ISO_8859-4', 'ISO_8859-4:1988', 'iso-ir-110', 'l4'
- and 'latin4' are aliases for this charset. Source: ISO 2375
- registry.
-
-'ISO-8859-5'
- 'ISO8859-5', 'ISO_8859-5', 'ISO_8859-5:1988', 'cyrillic' and
- 'iso-ir-144' are aliases for this charset. Source: ISO 2375
- registry.
-
-'ISO-8859-6'
- 'ASMO-708', 'ECMA-114', 'ISO8859-6', 'ISO_8859-6',
- 'ISO_8859-6:1987', 'arabic' and 'iso-ir-127' are aliases for this
- charset. Source: ISO 2375 registry.
-
-'ISO-8859-7'
- 'ECMA-118', 'ELOT_928', 'ISO8859-7', 'ISO_8859-7',
- 'ISO_8859-7:1987', 'greek', 'greek8' and 'iso-ir-126' are aliases
- for this charset. Source: ISO 2375 registry.
-
-'ISO-8859-8'
- 'ISO8859-8', 'ISO_8859-8', 'ISO_8859-8:1988', 'hebrew' and
- 'iso-ir-138' are aliases for this charset. Source: ISO 2375
- registry.
-
-'ISO-8859-9'
- 'ISO8859-9', 'ISO_8859-9', 'ISO_8859-9:1989', 'iso-ir-148', 'l5'
- and 'latin5' are aliases for this charset. Source: ISO 2375
- registry.
-
-'ISO_10367-box'
- 'iso-ir-155' is an alias for this charset. Source: ISO 2375
- registry.
-
-'ISO_2033-1983'
- 'e13b' and 'iso-ir-98' are aliases for this charset. Source: ISO
- 2375 registry.
-
-'ISO_5427'
- 'iso-ir-37' is an alias for this charset. Source: ISO 2375
- registry.
-
-'ISO_5427-ext'
- 'ISO_5427:1981' and 'iso-ir-54' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'ISO_5428'
- 'ISO_5428:1980' and 'iso-ir-55' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'ISO_646.basic'
- 'ISO_646.basic:1983' and 'ref' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'ISO_646.irv'
- 'ISO_646.irv:1983', 'irv' and 'iso-ir-2' are aliases for this
- charset. Source: ISO 2375 registry.
-
-'ISO_6937-2-25'
- 'iso-ir-152' is an alias for this charset. Source: ISO 2375
- registry.
-
-'ISO_8859-supp'
- 'iso-ir-154' and 'latin1-2-5' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'IT'
- 'ISO646-IT' and 'iso-ir-15' are aliases for this charset. Source:
- ISO 2375 registry.
-
-'JIS_C6220-1969-jp'
- 'JIS_C6220-1969', 'iso-ir-13', 'katakana' and 'x0201-7' are aliases
- for this charset. Source: ISO 2375 registry.
-
-'JIS_C6220-1969-ro'
- 'ISO646-JP', 'iso-ir-14' and 'jp' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'JIS_C6229-1984-a'
- 'jp-ocr-a' is an alias for this charset. Source: ISO 2375
- registry.
-
-'JIS_C6229-1984-b'
- 'ISO646-JP-OCR-B' and 'jp-ocr-b' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'JIS_C6229-1984-b-add'
- 'iso-ir-93' and 'jp-ocr-b-add' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'JIS_C6229-1984-hand'
- 'iso-ir-94' and 'jp-ocr-hand' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'JIS_C6229-1984-hand-add'
- 'iso-ir-95' and 'jp-ocr-hand-add' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'JIS_C6229-1984-kana'
- 'iso-ir-96' is an alias for this charset. Source: ISO 2375
- registry.
-
-'JIS_X0201'
- 'X0201' is an alias for this charset.
-
-'JUS_I.B1.002'
- 'ISO646-YU', 'iso-ir-141', 'js' and 'yu' are aliases for this
- charset. Source: ISO 2375 registry.
-
-'JUS_I.B1.003-mac'
- 'iso-ir-147' and 'macedonian' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'JUS_I.B1.003-serb'
- 'iso-ir-146' and 'serbian' are aliases for this charset. Source:
- ISO 2375 registry.
-
-'KOI-7'
- Source: Andrey A. Chernov <ache@nagual.pp.ru>.
-
-'KOI-8'
- 'GOST_19768-74' is an alias for this charset. Source: Andrey A.
- Chernov <ache@nagual.pp.ru>.
-
-'KOI8-R'
- Source: RFC1489 via Gabor Kiss <kissg@sztaki.hu>. And Andrey A.
- Chernov <ache@nagual.pp.ru>.
-
-'KOI8-RU'
- Source: http://cad.ntu-kpi.kiev.ua/multiling/koi8-ru/.
-
-'KOI8-U'
- Source: RFC 2319. Mibenum: 2088. Source:
- http://www.net.ua/KOI8-U/.
-
-'KSC5636'
- 'ISO646-KR' is an alias for this charset.
-
-'Latin-greek-1'
- 'iso-ir-27' is an alias for this charset. Source: ISO 2375
- registry.
-
-'MSZ_7795.3'
- 'ISO646-HU', 'hu' and 'iso-ir-86' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'NATS-DANO'
- 'iso-ir-9-1' is an alias for this charset. Source: ISO 2375
- registry.
-
-'NATS-DANO-ADD'
- 'iso-ir-9-2' is an alias for this charset. Source: ISO 2375
- registry.
-
-'NATS-SEFI'
- 'iso-ir-8-1' is an alias for this charset. Source: ISO 2375
- registry.
-
-'NATS-SEFI-ADD'
- 'iso-ir-8-2' is an alias for this charset. Source: ISO 2375
- registry.
-
-'NC_NC00-10'
- 'ISO646-CU', 'NC_NC00-10:81', 'cuba' and 'iso-ir-151' are aliases
- for this charset. Source: ISO 2375 registry.
-
-'NF_Z_62-010'
- 'ISO646-FR', 'fr' and 'iso-ir-69' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'NF_Z_62-010_(1973)'
- 'ISO646-FR1' and 'iso-ir-25' are aliases for this charset. Source:
- ISO 2375 registry.
-
-'NS_4551-1'
- 'ISO646-NO', 'iso-ir-60' and 'no' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'NS_4551-2'
- 'ISO646-NO2', 'iso-ir-61' and 'no2' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'NeXTSTEP'
- 'next' is an alias for this charset. Source: Peter Svanberg -
- psv@nada.kth.se.
-
-'PT'
- 'ISO646-PT' and 'iso-ir-16' are aliases for this charset. Source:
- ISO 2375 registry.
-
-'PT2'
- 'ISO646-PT2' and 'iso-ir-84' are aliases for this charset. Source:
- ISO 2375 registry.
-
-'SEN_850200_B'
- 'FI', 'ISO646-FI', 'ISO646-SE', 'SS636127', 'iso-ir-10' and 'se'
- are aliases for this charset. Source: ISO 2375 registry.
-
-'SEN_850200_C'
- 'ISO646-SE2', 'iso-ir-11' and 'se2' are aliases for this charset.
- Source: ISO 2375 registry.
-
-'T.61-7bit'
- 'iso-ir-102' is an alias for this charset. Source: ISO 2375
- registry.
-
-'baltic'
- 'iso-ir-179' is an alias for this charset. Source: ISO 2375
- registry. &g1esc x2d56 &g2esc x2e56 &g3esc x2f56.
-
-'greek-ccitt'
- 'iso-ir-150' is an alias for this charset. Source: ISO 2375
- registry.
-
-'greek7'
- 'iso-ir-88' is an alias for this charset. Source: ISO 2375
- registry.
-
-'greek7-old'
- 'iso-ir-18' is an alias for this charset. Source: ISO 2375
- registry.
-
-'hp-roman8'
- 'r8' and 'roman8' are aliases for this charset. Source: LaserJet
- IIP Printer User's Manual,. HP part no 33471-90901,
- Hewlet-Packard, June 1989.
-
-'latin-greek'
- 'iso-ir-19' is an alias for this charset. Source: ISO 2375
- registry.
-
-'mac-is'
-
-'macintosh'
- 'mac' is an alias for this charset. Source: The Unicode Standard
- ver 1.0, ISBN 0-201-56788-1, Oct 1991.
-
-'macintosh_ce'
- 'macce' is an alias for this charset. Source: Macintosh CE fonts.
-
-'sami'
- 'iso-ir-158', 'lap' and 'latin-lap' are aliases for this charset.
- Source: ISO 2375 registry.
-
-\1f
-File: recode.info, Node: ASCII misc, Next: IBM and MS, Prev: Tabular, Up: Top
-
-8 ASCII and some derivatives
-****************************
-
-* Menu:
-
-* ASCII:: Usual ASCII
-* ISO 8859:: ASCII extended by Latin Alphabets
-* ASCII-BS:: ASCII 7-bits, 'BS' to overstrike
-* flat:: ASCII without diacritics nor underline
-
-\1f
-File: recode.info, Node: ASCII, Next: ISO 8859, Prev: ASCII misc, Up: ASCII misc
-
-8.1 Usual ASCII
-===============
-
-This charset is available in Recode under the name 'ASCII'. In fact,
-its true name is 'ANSI_X3.4-1968' as per RFC 1345, accepted aliases
-being 'ANSI_X3.4-1986', 'ASCII', 'IBM367', 'ISO646-US',
-'ISO_646.irv:1991', 'US-ASCII', 'cp367', 'iso-ir-6' and 'us'. The
-shortest way of specifying it in Recode is 'us'.
-
- This documentation used to include ASCII tables. They have been
-removed since the 'recode' program can now recreate these easily:
-
- recode -lf us for commented ASCII
- recode -ld us for concise decimal table
- recode -lo us for concise octal table
- recode -lh us for concise hexadecimal table
-
-\1f
-File: recode.info, Node: ISO 8859, Next: ASCII-BS, Prev: ASCII, Up: ASCII misc
-
-8.2 ASCII extended by Latin Alphabets
-=====================================
-
-There are many Latin charsets. The following has been written by Tim
-Lasko <lasko@video.dec.com>, a long while ago:
-
- ISO Latin-1, or more completely ISO Latin Alphabet No 1, is now an
- international standard as of February 1987 (IS 8859, Part 1). For
- those American USEnet'rs that care, the 8-bit ASCII standard, which
- is essentially the same code, is going through the final
- administrative processes prior to publication. ISO Latin-1 (IS
- 8859/1) is actually one of an entire family of eight-bit one-byte
- character sets, all having ASCII on the left hand side, and with
- varying repertoires on the right hand side:
-
- * Latin Alphabet No 1 (caters to Western Europe - now approved).
- * Latin Alphabet No 2 (caters to Eastern Europe - now approved).
- * Latin Alphabet No 3 (caters to SE Europe + others - in draft
- ballot).
- * Latin Alphabet No 4 (caters to Northern Europe - in draft
- ballot).
- * Latin-Cyrillic alphabet (right half all Cyrillic - processing
- currently suspended pending USSR input).
- * Latin-Arabic alphabet (right half all Arabic - now approved).
- * Latin-Greek alphabet (right half Greek + symbols - in draft
- ballot).
- * Latin-Hebrew alphabet (right half Hebrew + symbols -
- proposed).
-
- The ISO Latin Alphabet 1 is available as a charset in Recode under
-the name 'Latin-1'. In fact, its true name is 'ISO_8859-1:1987' as per
-RFC 1345, accepted aliases being 'CP819', 'IBM819', 'ISO-8859-1',
-'ISO_8859-1', 'iso-ir-100', 'l1' and 'Latin-1'. The shortest way of
-specifying it in Recode is 'l1'.
-
- It is an eight-bit code which coincides with ASCII for the lower
-half. This documentation used to include Latin-1 tables. They have
-been removed since the 'recode' program can now recreate these easily:
-
- recode -lf l1 for commented ISO Latin-1
- recode -ld l1 for concise decimal table
- recode -lo l1 for concise octal table
- recode -lh l1 for concise hexadecimal table
-
-\1f
-File: recode.info, Node: ASCII-BS, Next: flat, Prev: ISO 8859, Up: ASCII misc
-
-8.3 ASCII 7-bits, 'BS' to overstrike
-====================================
-
-This charset is available in Recode under the name 'ASCII-BS', with 'BS'
-as an acceptable alias.
-
- The file is straight ASCII, seven bits only. According to the
-definition of ASCII, diacritics are applied by a sequence of three
-characters: the letter, one 'BS', the diacritic mark. We deviate
-slightly from this by exchanging the diacritic mark and the letter so,
-on a screen device, the diacritic will disappear and let the letter
-alone. At recognition time, both methods are acceptable.
-
- The French quotes are coded by the sequences: '< BS "' or '" BS <'
-for the opening quote and '> BS "' or '" BS >' for the closing quote.
-This artificial convention was inherited in straight 'ASCII-BS' from
-habits around 'Bang-Bang' entry, and is not well known. But we decided
-to stick to it so that 'ASCII-BS' charset will not lose French quotes.
-
- The 'ASCII-BS' charset is independent of 'ASCII', and different. The
-following examples demonstrate this, knowing at advance that '!2' is the
-'Bang-Bang' way of representing an 'e' with an acute accent. Compare:
-
- % echo \!2 | recode -v bang..l1/d
- Request: Bang-Bang..ISO-8859-1/Decimal-1
- 233, 10
-
-with:
-
- % echo \!2 | recode -v bang..bs/d
- Request: Bang-Bang..ISO-8859-1..ASCII-BS/Decimal-1
- 39, 8, 101, 10
-
- In the first case, the 'e' with an acute accent is merely transmitted
-by the 'Latin-1..ASCII' mapping, not having a special recoding rule for
-it. In the 'Latin-1..ASCII-BS' case, the acute accent is applied over
-the 'e' with a backspace: diacriticised characters have special rules.
-For the 'ASCII-BS' charset, reversibility is still possible, but there
-might be difficult cases.
-
-\1f
-File: recode.info, Node: flat, Prev: ASCII-BS, Up: ASCII misc
-
-8.4 ASCII without diacritics nor underline
-==========================================
-
-This charset is available in Recode under the name 'flat'.
-
- This code is ASCII expunged of all diacritics and underlines, as long
-as they are applied using three character sequences, with 'BS' in the
-middle. Also, despite slightly unrelated, each control character is
-represented by a sequence of two or three graphic characters. The
-newline character, however, keeps its functionality and is not
-represented.
-
- Note that charset 'flat' is a terminal charset. We can convert _to_
-'flat', but not _from_ it.
-
-\1f
-File: recode.info, Node: IBM and MS, Next: CDC, Prev: ASCII misc, Up: Top
-
-9 Some IBM or Microsoft charsets
-********************************
-
-Recode provides various IBM or Microsoft code pages (*note Tabular::).
-An easy way to find them all at once out of Recode itself is through the
-command:
-
- recode -l | egrep -i '(CP|IBM)[0-9]'
-
-But also, see few special charsets presented in the incoming sections.
-
-* Menu:
-
-* EBCDIC:: EBCDIC codes
-* IBM-PC:: IBM's PC code
-* Icon-QNX:: Unisys' Icon code
-
-\1f
-File: recode.info, Node: EBCDIC, Next: IBM-PC, Prev: IBM and MS, Up: IBM and MS
-
-9.1 EBCDIC code
-===============
-
-This charset is the IBM's External Binary Coded Decimal for Interchange
-Coding. This is an eight bits code. The following three variants were
-implemented in Recode independently of RFC 1345:
-
-'EBCDIC'
- In Recode, the 'us..ebcdic' conversion is identical to 'dd
- conv=ebcdic' conversion, and Recode 'ebcdic..us' conversion is
- identical to 'dd conv=ascii' conversion. This charset also
- represents the way Control Data Corporation relates EBCDIC to
- 8-bits ASCII.
-
-'EBCDIC-CCC'
- In Recode, the 'us..ebcdic-ccc' or 'ebcdic-ccc..us' conversions
- represent the way Concurrent Computer Corporation (formerly Perkin
- Elmer) relates EBCDIC to 8-bits ASCII.
-
-'EBCDIC-IBM'
- In Recode, the 'us..ebcdic-ibm' conversion is _almost_ identical to
- the GNU 'dd conv=ibm' conversion. Given the exact 'dd conv=ibm'
- conversion table, Recode once said:
-
- Codes 91 and 213 both recode to 173
- Codes 93 and 229 both recode to 189
- No character recodes to 74
- No character recodes to 106
-
- So I arbitrarily chose to recode 213 by 74 and 229 by 106. This
- makes the 'EBCDIC-IBM' recoding reversible, but this is not
- necessarily the best correction. In any case, I think that GNU
- 'dd' should be amended. 'dd' and Recode should ideally agree on
- the same correction. So, this table might change once again.
-
- RFC 1345 brings into Recode 15 other EBCDIC charsets, and 21 other
-charsets having EBCDIC in at least one of their alias names. You can
-get a list of all these by executing:
-
- recode -l | grep -i ebcdic
-
- Note that Recode may convert a pure stream of EBCDIC characters, but
-it does not know how to handle binary data between records which is
-sometimes used to delimit them and build physical blocks. If end of
-lines are not marked, fixed record size may produce something readable,
-but 'VB' or 'VBS' blocking is likely to yield some garbage in the
-converted results.
-
-\1f
-File: recode.info, Node: IBM-PC, Next: Icon-QNX, Prev: EBCDIC, Up: IBM and MS
-
-9.2 IBM's PC code
-=================
-
-This charset is available in Recode under the name 'IBM-PC', with 'dos',
-'MSDOS' and 'pc' as acceptable aliases. The shortest way of specifying
-it in Recode is 'pc'.
-
- The charset is aimed towards a PC microcomputer from IBM or any
-compatible. This is an eight-bit code. This charset is fairly old in
-Recode, its tables were produced a long while ago by mere inspection of
-a printed chart of the IBM-PC codes and glyph.
-
- It has 'CR-LF' as its implied surface. This means that, if the
-original end of lines have to be preserved while going out of 'IBM-PC',
-they should currently be added back through the usage of a surface on
-the other charset, or better, just never removed. Here are examples for
-both cases:
-
- recode pc..l2/cl < INPUT > OUTPUT
- recode pc/..l2 < INPUT > OUTPUT
-
- RFC 1345 brings into Recode 44 'IBM' charsets or code pages, and also
-8 other code pages. You can get a list of these all these by
-executing:(1)
-
- recode -l | egrep -i '(CP|IBM)[0-9]'
-
-All charset or aliases beginning with letters 'CP' or 'IBM' also have
-'CR-LF' as their implied surface. The same is true for a purely numeric
-alias in the same family. For example, all of '819', 'CP819' and
-'IBM819' imply 'CR-LF' as a surface. Note that 'ISO-8859-1' does _not_
-imply a surface, despite it shares the same tabular data as '819'.
-
- There are a few discrepancies between this 'IBM-PC' charset and the
-very similar RFC 1345 charset 'ibm437', which have not been analysed
-yet, so the charsets are being kept separate for now. This might change
-in the future, and the 'IBM-PC' charset might disappear. Wizards would
-be interested in comparing the output of these two commands:
-
- recode -vh IBM-PC..Latin-1
- recode -vh IBM437..Latin-1
-
-The first command uses the charset prior to RFC 1345 introduction. Both
-methods give different recodings. These differences are annoying, the
-fuzziness will have to be explained and settle down one day.
-
- ---------- Footnotes ----------
-
- (1) On DOS/Windows, stock shells do not know that apostrophes quote
-special characters like '|', so one needs to use double quotes instead
-of apostrophes.
-
-\1f
-File: recode.info, Node: Icon-QNX, Prev: IBM-PC, Up: IBM and MS
-
-9.3 Unisys' Icon code
-=====================
-
-This charset is available in Recode under the name 'Icon-QNX', with
-'QNX' as an acceptable alias.
-
- The file is using Unisys' Icon way to represent diacritics with code
-25 escape sequences, under the system QNX. This is a seven-bit code,
-even if eight-bit codes can flow through as part of IBM-PC charset.
-
-\1f
-File: recode.info, Node: CDC, Next: Micros, Prev: IBM and MS, Up: Top
-
-10 Charsets for CDC machines
-****************************
-
-What is now Recode evolved out, through many transformations really,
-from a set of programs which were originally written in "COMPASS",
-Control Data Corporation's assembler, with bits in FORTRAN, and later
-rewritten in CDC 6000 Pascal. The CDC heritage shows by the fact some
-old CDC charsets are still supported.
-
- The Recode author used to be familiar with CDC Scope-NOS/BE and
-Kronos-NOS, and many CDC formats. Reading CDC tapes directly on other
-machines is often a challenge, and Recode does not always solve it. It
-helps having tapes created in coded mode instead of binary mode, and
-using 'S' (Stranger) tapes instead of 'I' (Internal) tapes. ANSI labels
-and multi-file tapes might be the source of trouble. There are ways to
-handle a few Cyber Record Manager formats, but some of them might be
-quite difficult to decode properly after the transfer is done.
-
- Recode is usable only for a small subset of NOS text formats, and
-surely not with binary textual formats, like 'UPDATE' or 'MODIFY'
-sources, for example. Recode is not especially suited for reading 8/12
-or 56/60 packing, yet this could easily arranged if there was a demand
-for it. It does not have the ability to translate Display Code
-directly, as the ASCII conversion implied by tape drivers or FTP does
-the initial approximation. Recode can decode 6/12 caret notation over
-Display Code already mapped to ASCII.
-
-* Menu:
-
-* Display Code:: Control Data's Display Code
-* CDC-NOS:: ASCII 6/12 from NOS
-* Bang-Bang:: ASCII "bang bang"
-
-\1f
-File: recode.info, Node: Display Code, Next: CDC-NOS, Prev: CDC, Up: CDC
-
-10.1 Control Data's Display Code
-================================
-
-This code is not available in Recode, but repeated here for reference.
-This is a 6-bit code used on CDC mainframes.
-
- Octal display code to graphic Octal display code to octal ASCII
-
- 00 : 20 P 40 5 60 # 00 072 20 120 40 065 60 043
- 01 A 21 Q 41 6 61 [ 01 101 21 121 41 066 61 133
- 02 B 22 R 42 7 62 ] 02 102 22 122 42 067 62 135
- 03 C 23 S 43 8 63 % 03 103 23 123 43 070 63 045
- 04 D 24 T 44 9 64 " 04 104 24 124 44 071 64 042
- 05 E 25 U 45 + 65 _ 05 105 25 125 45 053 65 137
- 06 F 26 V 46 - 66 ! 06 106 26 126 46 055 66 041
- 07 G 27 W 47 * 67 & 07 107 27 127 47 052 67 046
- 10 H 30 X 50 / 70 ' 10 110 30 130 50 057 70 047
- 11 I 31 Y 51 ( 71 ? 11 111 31 131 51 050 71 077
- 12 J 32 Z 52 ) 72 < 12 112 32 132 52 051 72 074
- 13 K 33 0 53 $ 73 > 13 113 33 060 53 044 73 076
- 14 L 34 1 54 = 74 @ 14 114 34 061 54 075 74 100
- 15 M 35 2 55 75 \ 15 115 35 062 55 040 75 134
- 16 N 36 3 56 , 76 ^ 16 116 36 063 56 054 76 136
- 17 O 37 4 57 . 77 ; 17 117 37 064 57 056 77 073
-
- In older times, ':' used octal 63, and octal 0 was not a character.
-The table above shows the ASCII glyph interpretation of codes 60 to 77,
-yet these 16 codes were once defined differently.
-
- There is no explicit end of line in Display Code, and the Cyber
-Record Manager introduced many new ways to represent them, the
-traditional end of lines being reachable by setting 'RT' to 'Z'. If
-6-bit bytes in a file are sequentially counted from 1, a traditional end
-of line does exist if bytes 10*N+9 and 10N+10 are both zero for a given
-N, in which case these two bytes are not to be interpreted as '::'.
-Also, up to 9 immediately preceeding zero bytes, going backward, are to
-be considered as part of the end of line and not interpreted as ':'(1).
-
- ---------- Footnotes ----------
-
- (1) This convention replaced an older one saying that up to 4
-immediately preceeding _pairs_ of zero bytes, going backward, are to be
-considered as part of the end of line and not interpreted as '::'.
-
-\1f
-File: recode.info, Node: CDC-NOS, Next: Bang-Bang, Prev: Display Code, Up: CDC
-
-10.2 ASCII 6/12 from NOS
-========================
-
-This charset is available in Recode under the name 'CDC-NOS', with 'NOS'
-as an acceptable alias.
-
- This is one of the charsets in use on CDC Cyber NOS systems to
-represent ASCII, sometimes named "NOS 6/12" code for coding ASCII. This
-code is also known as "caret ASCII". It is based on a six bits character
-set in which small letters and control characters are coded using a '^'
-escape and, sometimes, a '@' escape.
-
- The routines given here presume that the six bits code is already
-expressed in ASCII by the communication channel, with embedded ASCII '^'
-and '@' escapes.
-
- Here is a table showing which characters are being used to encode
-each ASCII character.
-
- 000 ^5 020 ^# 040 060 0 100 @A 120 P 140 @G 160 ^P
- 001 ^6 021 ^[ 041 ! 061 1 101 A 121 Q 141 ^A 161 ^Q
- 002 ^7 022 ^] 042 " 062 2 102 B 122 R 142 ^B 162 ^R
- 003 ^8 023 ^% 043 # 063 3 103 C 123 S 143 ^C 163 ^S
- 004 ^9 024 ^" 044 $ 064 4 104 D 124 T 144 ^D 164 ^T
- 005 ^+ 025 ^_ 045 % 065 5 105 E 125 U 145 ^E 165 ^U
- 006 ^- 026 ^! 046 & 066 6 106 F 126 V 146 ^F 166 ^V
- 007 ^* 027 ^& 047 ' 067 7 107 G 127 W 147 ^G 167 ^W
- 010 ^/ 030 ^' 050 ( 070 8 110 H 130 X 150 ^H 170 ^X
- 011 ^( 031 ^? 051 ) 071 9 111 I 131 Y 151 ^I 171 ^Y
- 012 ^) 032 ^< 052 * 072 @D 112 J 132 Z 152 ^J 172 ^Z
- 013 ^$ 033 ^> 053 + 073 ; 113 K 133 [ 153 ^K 173 ^0
- 014 ^= 034 ^@ 054 , 074 < 114 L 134 \ 154 ^L 174 ^1
- 015 ^ 035 ^\ 055 - 075 = 115 M 135 ] 155 ^M 175 ^2
- 016 ^, 036 ^^ 056 . 076 > 116 N 136 @B 156 ^N 176 ^3
- 017 ^. 037 ^; 057 / 077 ? 117 O 137 _ 157 ^O 177 ^4
-
-\1f
-File: recode.info, Node: Bang-Bang, Prev: CDC-NOS, Up: CDC
-
-10.3 ASCII "bang bang"
-======================
-
-This charset is available in Recode under the name 'Bang-Bang'.
-
- This code, in use on Cybers at Universite' de Montre'al mainly,
-served to code a lot of French texts. The original name of this charset
-is "ASCII code' Display". This code is also known as "Bang-bang". It
-is based on a six bits character set in which capitals, French
-diacritics and a few others are coded using an '!' escape followed by a
-single character, and control characters using a double '!' escape
-followed by a single character.
-
- The routines given here presume that the six bits code is already
-expressed in ASCII by the communication channel, with embedded ASCII '!'
-escapes.
-
- Here is a table showing which characters are being used to encode
-each ASCII character.
-
- 000 !!@ 020 !!P 040 060 0 100 @ 120 !P 140 !@ 160 P
- 001 !!A 021 !!Q 041 !" 061 1 101 !A 121 !Q 141 A 161 Q
- 002 !!B 022 !!R 042 " 062 2 102 !B 122 !R 142 B 162 R
- 003 !!C 023 !!S 043 # 063 3 103 !C 123 !S 143 C 163 S
- 004 !!D 024 !!T 044 $ 064 4 104 !D 124 !T 144 D 164 T
- 005 !!E 025 !!U 045 % 065 5 105 !E 125 !U 145 E 165 U
- 006 !!F 026 !!V 046 & 066 6 106 !F 126 !V 146 F 166 V
- 007 !!G 027 !!W 047 ' 067 7 107 !G 127 !W 147 G 167 W
- 010 !!H 030 !!X 050 ( 070 8 110 !H 130 !X 150 H 170 X
- 011 !!I 031 !!Y 051 ) 071 9 111 !I 131 !Y 151 I 171 Y
- 012 !!J 032 !!Z 052 * 072 : 112 !J 132 !Z 152 J 172 Z
- 013 !!K 033 !![ 053 + 073 ; 113 !K 133 [ 153 K 173 ![
- 014 !!L 034 !!\ 054 , 074 < 114 !L 134 \ 154 L 174 !\
- 015 !!M 035 !!] 055 - 075 = 115 !M 135 ] 155 M 175 !]
- 016 !!N 036 !!^ 056 . 076 > 116 !N 136 ^ 156 N 176 !^
- 017 !!O 037 !!_ 057 / 077 ? 117 !O 137 _ 157 O 177 !_
-
-\1f
-File: recode.info, Node: Micros, Next: Miscellaneous, Prev: CDC, Up: Top
-
-11 Other micro-computer charsets
-********************************
-
-The 'NeXT' charset, which used to be especially provided in releases of
-Recode before 3.5, has been integrated since as one RFC 1345 table.
-
-* Menu:
-
-* Apple-Mac:: Apple's Macintosh code
-* AtariST:: Atari ST code
-
-\1f
-File: recode.info, Node: Apple-Mac, Next: AtariST, Prev: Micros, Up: Micros
-
-11.1 Apple's Macintosh code
-===========================
-
-This charset is available in Recode under the name 'Apple-Mac'. The
-shortest way of specifying it in Recode is 'ap'.
-
- The charset is aimed towards a Macintosh micro-computer from Apple.
-This is an eight bit code. The file is the data fork only. This
-charset is fairly old in Recode, its tables were produced a long while
-ago by mere inspection of a printed chart of the Macintosh codes and
-glyph.
-
- It has 'CR' as its implied surface. This means that, if the original
-end of lines have to be preserved while going out of 'Apple-Mac', they
-should currently be added back through the usage of a surface on the
-other charset, or better, just never removed. Here are examples for
-both cases:
-
- recode ap..l2/cr < INPUT > OUTPUT
- recode ap/..l2 < INPUT > OUTPUT
-
- RFC 1345 brings into Recode 2 other Macintosh charsets. You can
-discover them by using 'grep' over the output of 'recode -l':
-
- recode -l | grep -i mac
-
-Charsets 'macintosh' and 'macintosh_ce', as well as their aliases 'mac'
-and 'macce' also have 'CR' as their implied surface.
-
- There are a few discrepancies between the 'Apple-Mac' charset and the
-very similar RFC 1345 charset 'macintosh', which have not been analysed
-yet, so the charsets are being kept separate for now. This might change
-in the future, and the 'Apple-Mac' charset might disappear. Wizards
-would be interested in comparing the output of these two commands:
-
- recode -vh Apple-Mac..Latin-1
- recode -vh macintosh..Latin-1
-
-The first command use the charset prior to RFC 1345 introduction. Both
-methods give different recodings. These differences are annoying, the
-fuzziness will have to be explained and settle down one day.
-
- As a side note, some people ask if there is a Macintosh port of
-Recode. I'm not aware of any. I presume that if the tool fills a need
-for Macintosh users, someone will port it one of these days?
-
-\1f
-File: recode.info, Node: AtariST, Prev: Apple-Mac, Up: Micros
-
-11.2 Atari ST code
-==================
-
-This charset is available in Recode under the name 'AtariST'.
-
- This is the character set used on the Atari ST/TT/Falcon. This is
-similar to 'IBM-PC', but differs in some details: it includes some more
-accented characters, the graphic characters are mostly replaced by
-Hebrew characters, and there is a true German 'sharp s' different from
-Greek 'beta'.
-
- About the end-of-line conversions: the canonical end-of-line on the
-Atari is '\r\n', but unlike 'IBM-PC', the OS makes no difference between
-text and binary input/output; it is up to the application how to
-interpret the data. In fact, most of the libraries that come with
-compilers can grok both '\r\n' and '\n' as end of lines. Many of the
-users who also have access to Unix systems prefer '\n' to ease porting
-Unix utilities. So, for easing reversibility, Recode tries to let '\r'
-undisturbed through recodings.
-
-\1f
-File: recode.info, Node: Miscellaneous, Next: Surfaces, Prev: Micros, Up: Top
-
-12 Various other charsets
-*************************
-
-A few charsets do not fit well in the previous chapters, and are grouped
-here. Some of them were added to Recode long ago, at a time this tool
-was mainly meant for handling texts written in French. The bias still
-shows when these charsets are linked to 'Latin-1' instead of the wider
-'Unicode', but this is being corrected as Recode evolves.
-
-* Menu:
-
-* HTML:: World Wide Web representations
-* LaTeX:: LaTeX macro calls
-* Texinfo:: GNU project documentation files
-* Vietnamese:: Vietnamese charsets
-* African:: African charsets
-* Others:: Cyrillic and other charsets
-* Java:: Java code
-* Texte:: Easy French conventions
-* Mule:: Mule as a multiplexed charset
-
-\1f
-File: recode.info, Node: HTML, Next: LaTeX, Prev: Miscellaneous, Up: Miscellaneous
-
-12.1 World Wide Web representations
-===================================
-
-Character entities have been introduced by SGML and made widely popular
-through HTML, the markup language in use for the World Wide Web, or Web
-or WWW for short. For representing _unusual_ characters, HTML texts use
-special sequences, beginning with an ampersand '&' and ending with a
-semicolon ';'. The sequence may itself start with a number sigh '#' and
-be followed by digits, so forming a "numeric character reference", or
-else be an alphabetic identifier, so forming a "character entity
-reference".
-
- The HTML standards have been revised into different HTML levels over
-time, and the list of allowable character entities differ in them. The
-later XML, meant to simplify many things, has an option
-('standalone=yes') which much restricts that list. The Recode library
-is able to convert character references between their mnemonic form and
-their numeric form, depending on aimed HTML standard level. It also
-can, of course, convert between HTML and various other charsets.
-
- Here is a list of those HTML variants which Recode supports. Some
-notes have been provided by Franc,ois Yergeau <yergeau@alis.com>.
-
-'XML-standalone'
- This charset is available in Recode under the name
- 'XML-standalone', with 'h0' as an acceptable alias. It is
- documented in section 4.1 of <http://www.w3.org/TR/REC-xml>. It
- only knows '&', '>', '<', '"' and '''.
-
-'HTML_1.1'
- This charset is available in Recode under the name 'HTML_1.1', with
- 'h1' as an acceptable alias. HTML 1.0 was never really documented.
-
-'HTML_2.0'
- This charset is available in Recode under the name 'HTML_2.0', and
- has 'RFC1866', '1866' and 'h2' for aliases. HTML 2.0 entities are
- listed in RFC 1866. Basically, there is an entity for each
- _alphabetical_ character in the right part of ISO 8859-1. In
- addition, there are four entities for syntax-significant ASCII
- characters: '&', '>', '<' and '"'.
-
-'HTML-i18n'
- This charset is available in Recode under the name 'HTML-i18n', and
- has 'RFC2070' and '2070' for aliases. RFC 2070 added entities to
- cover the whole right part of ISO 8859-1. The list is conveniently
- accessible at
- <http://www.alis.com:8085/ietf/html/html-latin1.sgml>. In
- addition, four i18n-related entities were added: '‌'
- ('‌'), '‍' ('‍'), '‎' ('‎') and '‏'
- ('‏').
-
-'HTML_3.2'
- This charset is available in Recode under the name 'HTML_3.2', with
- 'h3' as an acceptable alias. HTML 3.2
- (http://www.w3.org/TR/REC-html32.html) took up the full Latin-1
- list but not the i18n-related entities from RFC 2070.
-
-'HTML_4.0'
- This charset is available in Recode under the name 'HTML_4.0', and
- has 'h4' and 'h' for aliases. Beware that the particular alias 'h'
- is not _tied_ to HTML 4.0, but to the highest HTML level supported
- by Recode; so it might later represent HTML level 5 if this is ever
- created. HTML 4.0 (http://www.w3.org/TR/REC-html40/) has the whole
- Latin-1 list, a set of entities for symbols, mathematical symbols,
- and Greek letters, and another set for markup-significant and
- internationalization characters comprising the 4 ASCII entities,
- the 4 i18n-related from RFC 2070 plus some more. See
- <http://www.w3.org/TR/REC-html40/sgml/entities.html>.
-
- Printable characters from Latin-1 may be used directly in an HTML
-text. However, partly because people have deficient keyboards, partly
-because people want to transmit HTML texts over non 8-bit clean channels
-while not using MIME, it is common (yet debatable) to use character
-entity references even for Latin-1 characters, when they fall outside
-ASCII (that is, when they have the 8th bit set).
-
- When you recode from another charset to 'HTML', beware that all
-occurrences of double quotes, ampersands, and left or right angle
-brackets are translated into special sequences. However, in practice,
-people often use ampersands and angle brackets in the other charset for
-introducing HTML commands, compromising it: it is not pure HTML, not it
-is pure other charset. These particular translations can be rather
-inconvenient, they may be specifically inhibited through the command
-option '-d' (*note Mixed::).
-
- Codes not having a mnemonic entity are output by Recode using the
-'&#NNN;' notation, where NNN is a decimal representation of the UCS code
-value. When there is an entity name for a character, it is always
-preferred over a numeric character reference. ASCII printable
-characters are always generated directly. So is the newline. While
-reading HTML, Recode supports numeric character reference as alternate
-writings, even when written as hexadecimal numbers, as in '�'.
-This is documented in:
-
- http://www.w3.org/TR/REC-html40/intro/sgmltut.html#h-3.2.3
-
- When Recode translates to HTML, the translation occurs according to
-the HTML level as selected by the goal charset. When translating _from_
-HTML, Recode not only accepts the character entity references known at
-that level, but also those of all other levels, as well as a few
-alternative special sequences, to be forgiving to files using other HTML
-standards.
-
- Recode can be used to _normalise_ an HTML file using oldish
-conventions. For example, it accepts '&AE;', as this once was a valid
-writing, somewhere. However, it should always produce 'Æ' instead
-of '&AE;'. Yet, this is not completely true. If one does:
-
- recode h3..h3 < INPUT
-
-the operation will be optimised into a mere copy, and you can get '&AE;'
-this way, if you had some in your input file. But if you explicitly
-defeat the optimisation, like this maybe:
-
- recode h3..u2,u2..h3 < INPUT
-
-then '&AE;' should be normalised into 'Æ' by the operation.
-
-\1f
-File: recode.info, Node: LaTeX, Next: Texinfo, Prev: HTML, Up: Miscellaneous
-
-12.2 LaTeX macro calls
-======================
-
-This charset is available in Recode under the name 'LaTeX' and has
-'ltex' as an alias. It is used for ASCII files coded to be read by
-LaTeX or, in certain cases, by TeX.
-
- Whenever you recode from another charset to 'LaTeX', beware that all
-occurrences of backslashes '\' are translated into the string
-'\backslash{}'. However, in practice, people often use backslashes in
-the other charset for introducing TeX commands, compromising it: it is
-not pure TeX, nor it is pure other charset. This translation of
-backslashes into '\backslash{}' can be rather inconvenient, it may be
-inhibited through the command option '-d' (*note Mixed::).
-
-\1f
-File: recode.info, Node: Texinfo, Next: Vietnamese, Prev: LaTeX, Up: Miscellaneous
-
-12.3 GNU project documentation files
-====================================
-
-This charset is available in Recode under the name 'Texinfo' and has
-'texi' and 'ti' for aliases. It is used by the GNU project for its
-documentation. Texinfo files may be converted into Info files by the
-'makeinfo' program and into nice printed manuals by the TeX system.
-
- Even if Recode may transform other charsets to Texinfo, it may not
-read Texinfo files yet. In these times, usages are also changing
-between versions of Texinfo, and Recode only partially succeeds in
-correctly following these changes. So, for now, Texinfo support in
-Recode should be considered as work still in progress (!).
-
-\1f
-File: recode.info, Node: Vietnamese, Next: African, Prev: Texinfo, Up: Miscellaneous
-
-12.4 Vietnamese charsets
-========================
-
-We are currently experimenting the implementation, in Recode, of a few
-character sets and transliterated forms to handle the Vietnamese
-language. They are quite briefly summarised, here.
-
-'TCVN'
- The TCVN charset has an incomplete name. It might be one of the
- three charset 'VN1', 'VN2' or 'VN3'. Yes 'VN2' might be a second
- version of 'VISCII'. To be clarified.
-
-'VISCII'
- This is an 8-bit character set which seems to be rather popular for
- writing Vietnamese.
-
-'VPS'
- This is an 8-bit character set for Vietnamese. No much reference.
-
-'VIQR'
- The VIQR convention is a 7-bit, 'ASCII' transliteration for
- Vietnamese.
-
-'VNI'
- The VNI convention is a 8-bit, 'Latin-1' transliteration for
- Vietnamese.
-
- Still lacking for Vietnamese in Recode, are the charsets 'CP1129' and
-'CP1258'.
-
-\1f
-File: recode.info, Node: African, Next: Others, Prev: Vietnamese, Up: Miscellaneous
-
-12.5 African charsets
-=====================
-
-Some African character sets are available for a few languages, when
-these are heavily used in countries where French is also currently
-spoken.
-
- One African charset is usable for Bambara, Ewondo and Fulfude, as
-well as for French. This charset is available in Recode under the name
-'AFRFUL-102-BPI_OCIL'. Accepted aliases are 'bambara', 'bra', 'ewondo'
-and 'fulfude'. Transliterated forms of the same are available under the
-name 'AFRFUL-103-BPI_OCIL'. Accepted aliases are 't-bambara', 't-bra',
-'t-ewondo' and 't-fulfude'.
-
- Another African charset is usable for Lingala, Sango and Wolof, as
-well as for French. This charset is available in Recode under the name
-'AFRLIN-104-BPI_OCIL'. Accepted aliases are 'lingala', 'lin', 'sango'
-and 'wolof'. Transliterated forms of the same are available under the
-name 'AFRLIN-105-BPI_OCIL'. Accepted aliases are 't-lingala', 't-lin',
-'t-sango' and 't-wolof'.
-
- To ease exchange with 'ISO-8859-1', there is a charset conveying
-transliterated forms for Latin-1 in a way which is compatible with the
-other African charsets in this series. This charset is available in
-Recode under the name 'AFRL1-101-BPI_OCIL'. Accepted aliases are
-'t-fra' and 't-francais'.
-
-\1f
-File: recode.info, Node: Others, Next: Java, Prev: African, Up: Miscellaneous
-
-12.6 Cyrillic and other charsets
-================================
-
-The following Cyrillic charsets are already available in Recode through RFC 1345
-tables: 'CP1251' with aliases '1251', ' ms-cyrl' and 'windows-1251';
-'CSN_369103' with aliases 'ISO-IR-139' and 'KOI8_L2'; 'ECMA-cyrillic'
-with aliases 'ECMA-113', 'ECMA-113:1986' and 'iso-ir-111', 'IBM880' with
-aliases '880', 'CP880' and 'EBCDIC-Cyrillic'; 'INIS-cyrillic' with alias
-'iso-ir-51'; 'ISO-8859-5' with aliases 'cyrillic', ' ISO-8859-5:1988'
-and 'iso-ir-144'; 'KOI-7'; 'KOI-8' with alias 'GOST_19768-74'; 'KOI8-R';
-'KOI8-RU' and finally 'KOI8-U'.
-
- There seems to remain some confusion in Roman charsets for Cyrillic
-languages, and because a few users requested it repeatedly, Recode now
-offers special services in that area. Consider these charsets as
-experimental and debatable, as the extraneous tables describing them are
-still a bit fuzzy or non-standard. Hopefully, in the long run, these
-charsets will be covered in Keld Simonsen's works to the satisfaction of
-everybody, and this section will merely disappear.
-
-'KEYBCS2'
- This charset is available under the name 'KEYBCS2', with
- 'Kamenicky' as an accepted alias.
-
-'CORK'
- This charset is available under the name 'CORK', with 'T1' as an
- accepted alias.
-
-'KOI-8_CS2'
- This charset is available under the name 'KOI-8_CS2'.
-
-\1f
-File: recode.info, Node: Java, Next: Texte, Prev: Others, Up: Miscellaneous
-
-12.7 Java code
-==============
-
-This charset is available under the name 'Java', and should be
-considered experimental for now.
-
- ASCII characters represent themselves. Character outside ASCII are
-coded as '\uNNNN', where 'NNNN' stands for the four-digit hexadecimal
-value of the character within Unicode. The canonical representation
-uses lower case for the 'u' prefix and for the hexadecimal digits, yet
-Recode also accepts upper case.
-
- There is currently no attempt to distinguish Java comments from Java
-strings while the recoding goes, and this may be corrected some day.
-
-\1f
-File: recode.info, Node: Texte, Next: Mule, Prev: Java, Up: Miscellaneous
-
-12.8 Easy French conventions
-============================
-
-This charset is available in Recode under the name 'Texte' and has
-'txte' for an alias. It is a seven bits code, identical to 'ASCII-BS',
-save for French diacritics which are noted using a slightly different
-convention.
-
- At text entry time, these conventions provide a little speed up. At
-read time, they slightly improve the readability over a few alternate
-ways of coding diacritics. Of course, it would better to have a
-specialised keyboard to make direct eight bits entries and fonts for
-immediately displaying eight bit ISO Latin-1 characters. But not
-everybody is so fortunate. In a few mailing environments, and sadly
-enough, it still happens that the eight bit is often willing-fully
-destroyed.
-
- Easy French has been in use in France for a while. I only slightly
-adapted it (the diaeresis option) to make it more comfortable to several
-usages in Que'bec originating from Universite' de Montre'al. In fact,
-the main problem for me was not to necessarily to invent Easy French,
-but to recognise the "best" convention to use, (best is not being
-defined, here) and to try to solve the main pitfalls associated with the
-selected convention. Shortly said, we have:
-
-'e''
- for 'e' (and some other vowels) with an acute accent,
-'e`'
- for 'e' (and some other vowels) with a grave accent,
-'e^'
- for 'e' (and some other vowels) with a circumflex accent,
-'e"'
- for 'e' (and some other vowels) with a diaeresis,
-'c,'
- for 'c' with a cedilla.
-
-There is no attempt at expressing the 'ae' and 'oe' diphthongs. French
-also uses tildes over 'n' and 'a', but seldomly, and this is not
-represented either. In some countries, ':' is used instead of '"' to
-mark diaeresis. Recode supports only one convention per call, depending
-on the '-c' option of the 'recode' command. French quotes (sometimes
-called "angle quotes") are noted the same way English quotes are noted
-in TeX, _id est_ by '``' and ''''. No effort has been put to preserve
-Latin ligatures ('ae', 'oe') which are representable in several other
-charsets. So, these ligatures may be lost through Easy French
-conventions.
-
- The convention is prone to losing information, because the diacritic
-meaning overloads some characters that already have other uses. To
-alleviate this, some knowledge of the French language is boosted into
-the recognition routines. So, the following subtleties are
-systematically obeyed by the various recognisers.
-
- 1. A comma which follows a 'c' is interpreted as a cedilla only if it
- is followed by one of the vowels 'a', 'o' or 'u'.
-
- 2. A single quote which follows a 'e' does not necessarily means an
- acute accent if it is followed by a single other one. For example:
-
- 'e''
- will give an 'e' with an acute accent.
- 'e'''
- will give a simple 'e', with a closing quotation mark.
- 'e''''
- will give an 'e' with an acute accent, followed by a closing
- quotation mark.
-
- There is a problem induced by this convention if there are English
- quotations with a French text. In sentences like:
-
- There's a meeting at Archie's restaurant.
-
- the single quotes will be mistaken twice for acute accents. So
- English contractions and suffix possessives could be mangled.
-
- 3. A double quote or colon, depending on '-c' option, which follows a
- vowel is interpreted as diaeresis only if it is followed by another
- letter. But there are in French several words that _end_ with a
- diaeresis, and the Recode library is aware of them. There are
- words ending in "igue", either feminine words without a relative
- masculine (besaigue" and cigue"), or feminine words with a relative
- masculine(1) (aigue", ambigue", contigue", exigue", subaigue" and
- suraigue"). There are also words not ending in "igue", but
- instead, either ending by "i"(2) (ai", congai", goi", hai"kai",
- inoui", sai", samurai", thai" and tokai"), ending by "e" (canoe")
- or ending by "u"(3) (Esau").
-
- Just to complete this topic, note that it would be wrong to make a
- rule for all words ending in "igue" as needing a diaerisis, as
- there are counter-examples (becfigue, be`sigue, bigue, bordigue,
- bourdigue, brigue, contre-digue, digue, d'intrigue, fatigue, figue,
- garrigue, gigue, igue, intrigue, ligue, prodigue, sarigue and
- zigue).
-
- ---------- Footnotes ----------
-
- (1) There are supposed to be seven words in this case. So, one is
-missing.
-
- (2) Look at one of the following sentences (the second has to be
-interpreted with the '-c' option):
-
- "Ai"e! Voici le proble`me que j'ai"
- Ai:e! Voici le proble`me que j'ai:
-
- There is an ambiguity between an ai", the small animal, and the
-indicative future of _avoir_ (first person singular), when followed by
-what could be a diaeresis mark. Hopefully, the case is solved by the
-fact that an apostrophe always precedes the verb and almost never the
-animal.
-
- (3) I did not pay attention to proper nouns, but this one showed up
-as being fairly evident.
-
-\1f
-File: recode.info, Node: Mule, Prev: Texte, Up: Miscellaneous
-
-12.9 Mule as a multiplexed charset
-==================================
-
-This version of Recode barely starts supporting multiplexed or
-super-charsets, that is, those encoding methods by which a single text
-stream may contain a combination of more than one constituent charset.
-The only multiplexed charset in Recode is 'Mule', and even then, it is
-only very partially implemented: the only correspondence available is
-with 'Latin-1'. The author fastly implemented this only because he
-needed this for himself. However, it is intended that Mule support to
-become more real in subsequent releases of Recode.
-
- Multiplexed charsets are not to be confused with mixed charset texts
-(*note Mixed::). For mixed charset input, the rules allowing to
-distinguish which charset is current, at any given place, are kind of
-informal, and driven from the semantics of what the file contains. On
-the other side, multiplexed charsets are _designed_ to be interpreted
-fairly precisely, and quite independently of any informational context.
-
- The spelling 'Mule' originally stands for '_mul_tilingual
-_e_nhancement to GNU Emacs', it is the result of a collective effort
-orchestrated by Handa Ken'ichi since 1993. When 'Mule' got rewritten in
-the main development stream of GNU Emacs 20, the FSF renamed it 'MULE',
-meaning '_mul_tilingual _e_nvironment in GNU Emacs'. Even if the
-charset 'Mule' is meant to stay internal to GNU Emacs, it sometimes
-breaks loose in external files, and as a consequence, a recoding tool is
-sometimes needed. Within Emacs, 'Mule' comes with 'Leim', which stands
-for '_l_ibraries of _e_macs _i_nput _m_ethods'. One of these libraries
-is named 'quail'(1).
-
- ---------- Footnotes ----------
-
- (1) Usually, quail means quail egg in Japanese, while egg alone is
-usually chicken egg. Both quail egg and chicken egg are popular food in
-Japan. The 'quail' input system has been named because it is smaller
-that the previous 'EGG' system. As for 'EGG', it is the translation of
-'TAMAGO'. This word comes from the Japanese sentence '_ta_kusan
-_ma_tasete _go_mennasai', meaning 'sorry to have let you wait so long'.
-Of course, the publication of 'EGG' has been delayed many times...
-(Story by Takahashi Naoto)
-
-\1f
-File: recode.info, Node: Surfaces, Next: Internals, Prev: Miscellaneous, Up: Top
-
-13 All about surfaces
-*********************
-
-A "surface" is the varnish added over a charset so it fits in actual
-bits and bytes. How end of lines are exactly encoded is not really
-pertinent to the charset, and so, there is surface for end of lines.
-'Base64' is also a surface, as we may encode any charset in it. Other
-examples would DES enciphering, or gzip compression (even if Recode does
-not offer them currently): these are ways to give a real life to
-theoretical charsets.
-
- The "trivial surface" consists of using a fixed number of bits (often
-eight) for each character, the bits together hold the integer value of
-the index for the character in its charset table. There are many kinds
-of surfaces, beyond the trivial one, all having the purpose of
-increasing selected qualities for the storage or transmission. For
-example, surfaces might increase the resistance to channel limits
-('Base64'), the transmission speed ('gzip'), the information privacy
-('DES'), the conformance to operating system conventions ('CR-LF'), the
-blocking into records ('VB'), and surely other things as well(1). Many
-surfaces may be applied to a stream of characters from a charset, the
-order of application of surfaces is important, and surfaces should be
-removed in the reverse order of their application.
-
- Even if surfaces may generally be applied to various charsets, some
-surfaces were specifically designed for a particular charset, and would
-not make much sense if applied to other charsets. In such cases, these
-conceptual surfaces have been implemented as Recode charsets, instead of
-as surfaces. This choice yields to cleaner syntax and usage. *Note
-Universal::.
-
- Surfaces are implemented within Recode as special charsets which may
-only transform to or from the 'data' or 'tree' special charsets. Clever
-users may use this knowledge for writing surface names in requests
-exactly as if they were pure charsets, when the only need is to change
-surfaces without any kind of recoding between real charsets. In such
-contexts, either 'data' or 'tree' may also be used as if it were some
-kind of generic, anonymous charset: the request 'data..SURFACE' merely
-adds the given SURFACE, while the request 'SURFACE..data' removes it.
-
- The Recode library distinguishes between mere data surfaces, and
-structural surfaces, also called tree surfaces for short. Structural
-surfaces might allow, in the long run, transformations between a few
-specialised representations of structural information like MIME parts,
-Perl or Python initialisers, LISP S-expressions, XML, Emacs outlines,
-etc.
-
- We are still experimenting with surfaces in Recode. The concept
-opens the doors to many avenues; it is not clear yet which ones are
-worth pursuing, and which should be abandoned. In particular,
-implementation of structural surfaces is barely starting, there is not
-even a commitment that tree surfaces will stay in Recode, if they do
-prove to be more cumbersome than useful. This chapter presents all
-surfaces currently available.
-
-* Menu:
-
-* Permutations:: Permuting groups of bytes
-* End lines:: Representation for end of lines
-* MIME:: MIME contents encodings
-* Dump:: Interpreted character dumps
-* Test:: Artificial data for testing
-
- ---------- Footnotes ----------
-
- (1) These are mere examples to explain the concept, Recode only has
-'Base64' and 'CR-LF', actually.
-
-\1f
-File: recode.info, Node: Permutations, Next: End lines, Prev: Surfaces, Up: Surfaces
-
-13.1 Permuting groups of bytes
-==============================
-
-A permutation is a surface transformation which reorders groups of
-eight-bit bytes. A _21_ permutation exchanges pairs of successive
-bytes. If the text contains an odd number of bytes, the last byte is
-merely copied. An _4321_ permutation inverts the order of quadruples of
-bytes. If the text does not contains a multiple of four bytes, the
-remaining bytes are nevertheless permuted as _321_ if there are three
-bytes, _21_ if there are two bytes, or merely copied otherwise.
-
-'21'
- This surface is available in Recode under the name '21-Permutation'
- and has 'swabytes' for an alias.
-
-'4321'
- This surface is available in Recode under the name
- '4321-Permutation'.
-
-\1f
-File: recode.info, Node: End lines, Next: MIME, Prev: Permutations, Up: Surfaces
-
-13.2 Representation for end of lines
-====================================
-
-The same charset might slightly differ, from one system to another, for
-the single fact that end of lines are not represented identically on all
-systems. The representation for an end of line within Recode is the
-'ASCII' or 'UCS' code with value 10, or 'LF'. Other conventions for
-representing end of lines are available through surfaces.
-
-'CR'
- This convention is popular on Apple's Macintosh machines. When
- this surface is applied, each line is terminated by 'CR', which has
- 'ASCII' value 13. Unless the library is operating in strict mode,
- adding or removing the surface will in fact _exchange_ 'CR' and
- 'LF', for better reversibility. However, in strict mode, the
- exchange does not happen, any 'CR' will be copied verbatim while
- applying the surface, and any 'LF' will be copied verbatim while
- removing it.
-
- This surface is available in Recode under the name 'CR', it does
- not have any aliases. This is the implied surface for the Apple
- Macintosh related charsets.
-
-'CR-LF'
- This convention is popular on Microsoft systems running on IBM PCs
- and compatible. When this surface is applied, each line is
- terminated by a sequence of two characters: one 'CR' followed by
- one 'LF', in that order.
-
- For compatibility with oldish MS-DOS systems, removing a 'CR-LF'
- surface will discard the first encountered 'C-z', which has 'ASCII'
- value 26, and everything following it in the text. Adding this
- surface will not, however, append a 'C-z' to the result.
-
- This surface is available in Recode under the name 'CR-LF' and has
- 'cl' for an alias. This is the implied surface for the IBM or
- Microsoft related charsets or code pages.
-
- Some other charsets might have their own representation for an end of
-line, which is different from 'LF'. For example, this is the case of
-various 'EBCDIC' charsets, or 'Icon-QNX'. The recoding of end of lines
-is intimately tied into such charsets, it is not available separately as
-surfaces.
-
-\1f
-File: recode.info, Node: MIME, Next: Dump, Prev: End lines, Up: Surfaces
-
-13.3 MIME contents encodings
-============================
-
-RFC 2045 defines two 7-bit surfaces, meant to prepare 8-bit messages for
-transmission. Base64 is especially usable for binary entities, while
-Quoted-Printable is especially usable for text entities, in those case
-the lower 128 characters of the underlying charset coincide with ASCII.
-
-'Base64'
- This surface is available in Recode under the name 'Base64', with
- 'b64' and '64' as acceptable aliases.
-
-'Quoted-Printable'
- This surface is available in Recode under the name
- 'Quoted-Printable', with 'quote-printable' and 'QP' as acceptable
- aliases.
-
- Note that 'UTF-7', which may be also considered as a MIME surface, is
-provided as a genuine charset instead, as it necessary relates to
-'UCS-2' and nothing else. *Note UTF-7::.
-
- A little historical note, also showing the three levels of acceptance
-of Internet standards. MIME changed from a "Proposed Standard"
-(RFC 1341-1344, 1992) to a "Draft Standard" (RFC 1521-1523) in 1993, and
-was _recycled_ as a "Draft Standard" in 1996-11. It is not yet a "Full
-Standard".
-
-\1f
-File: recode.info, Node: Dump, Next: Test, Prev: MIME, Up: Surfaces
-
-13.4 Interpreted character dumps
-================================
-
-Dumps are surfaces meant to express, in ways which are a bit more
-readable, the bit patterns used to represent characters. They allow the
-inspection or debugging of character streams, but also, they may assist
-a bit the production of C source code which, once compiled, would hold
-in memory a copy of the original coding. However, Recode does not
-attempt, in any way, to produce complete C source files in dumps. User
-hand editing or 'Makefile' trickery is still needed for adding missing
-lines. Dumps may be given in decimal, hexadecimal and octal, and be
-based over chunks of either one, two or four eight-bit bytes.
-Formatting has been chosen to respect the C language syntax for number
-constants, with commas and newlines inserted appropriately.
-
- However, when dumping two or four byte chunks, the last chunk may be
-incomplete. This is observable through the usage of narrower expression
-for that last chunk only. Such a shorter chunk would not be compiled
-properly within a C initialiser, as all members of an array share a
-single type, and so, have identical sizes.
-
-'Octal-1'
- This surface corresponds to an octal expression of each input byte.
-
- It is available in Recode under the name 'Octal-1', with 'o1' and
- 'o' as acceptable aliases.
-
-'Octal-2'
- This surface corresponds to an octal expression of each pair of
- input bytes, except for the last pair, which may be short.
-
- It is available in Recode under the name 'Octal-2' and has 'o2' for
- an alias.
-
-'Octal-4'
- This surface corresponds to an octal expression of each quadruple
- of input bytes, except for the last quadruple, which may be short.
-
- It is available in Recode under the name 'Octal-4' and has 'o4' for
- an alias.
-
-'Decimal-1'
- This surface corresponds to an decimal expression of each input
- byte.
-
- It is available in Recode under the name 'Decimal-1', with 'd1' and
- 'd' as acceptable aliases.
-
-'Decimal-2'
- This surface corresponds to an decimal expression of each pair of
- input bytes, except for the last pair, which may be short.
-
- It is available in Recode under the name 'Decimal-2' and has 'd2'
- for an alias.
-
-'Decimal-4'
- This surface corresponds to an decimal expression of each quadruple
- of input bytes, except for the last quadruple, which may be short.
-
- It is available in Recode under the name 'Decimal-4' and has 'd4'
- for an alias.
-
-'Hexadecimal-1'
- This surface corresponds to an hexadecimal expression of each input
- byte.
-
- It is available in Recode under the name 'Hexadecimal-1', with 'x1'
- and 'x' as acceptable aliases.
-
-'Hexadecimal-2'
- This surface corresponds to an hexadecimal expression of each pair
- of input bytes, except for the last pair, which may be short.
-
- It is available in Recode under the name 'Hexadecimal-2', with 'x2'
- for an alias.
-
-'Hexadecimal-4'
- This surface corresponds to an hexadecimal expression of each
- quadruple of input bytes, except for the last quadruple, which may
- be short.
-
- It is available in Recode under the name 'Hexadecimal-4', with 'x4'
- for an alias.
-
- When removing a dump surface, that is, when reading a dump results
-back into a sequence of bytes, the narrower expression for a short last
-chunk is recognised, so dumping is a fully reversible operation.
-However, in case you want to produce dumps by other means than through
-Recode, beware that for decimal dumps, the library has to rely on the
-number of spaces to establish the original byte size of the chunk.
-
- Although the library might report reversibility errors, removing a
-dump surface is a rather forgiving process: one may mix bases, group a
-variable number of data per source line, or use shorter chunks in places
-other than at the far end. Also, source lines not beginning with a
-number are skipped. So, Recode should often be able to read a whole C
-header file, wrapping the results of a previous dump, and regenerate the
-original byte string.
-
-\1f
-File: recode.info, Node: Test, Prev: Dump, Up: Surfaces
-
-13.5 Artificial data for testing
-================================
-
-A few pseudo-surfaces exist to generate debugging data out of thin air.
-These surfaces are only meant for the expert Recode user, and are only
-useful in a few contexts, like for generating binary permutations from
-the recoding or acting on them.
-
- Debugging surfaces, _when removed_, insert their generated data at
-the beginning of the output stream, and copy all the input stream after
-the generated data, unchanged. This strange removal constraint comes
-from the fact that debugging surfaces are usually specified in the
-_before_ position instead of the _after_ position within a request.
-With debugging surfaces, one often recodes file '/dev/null' in filter
-mode. Specifying many debugging surfaces at once has an accumulation
-effect on the output, and since surfaces are removed from right to left,
-each generating its data at the beginning of previous output, the net
-effect is an _impression_ that debugging surfaces are generated from
-left to right, each appending to the result of the previous. In any
-case, any real input data gets appended after what was generated.
-
-'test7'
- When removed, this surface produces 128 single bytes, the first
- having value 0, the second having value 1, and so forth until all
- 128 values have been generated.
-
-'test8'
- When removed, this surface produces 256 single bytes, the first
- having value 0, the second having value 1, and so forth until all
- 256 values have been generated.
-
-'test15'
- When removed, this surface produces 64509 double bytes, the first
- having value 0, the second having value 1, and so forth until all
- values have been generated, but excluding risky 'UCS-2' values,
- like all codes from the surrogate 'UCS-2' area (for 'UTF-16'), the
- byte order mark, and values known as invalid 'UCS-2'.
-
-'test16'
- When removed, this surface produces 65536 double bytes, the first
- having value 0, the second having value 1, and so forth until all
- 65536 values have been generated.
-
- As an example, the command 'recode l5/test8..dump < /dev/null' is a
-convoluted way to produce an output similar to 'recode -lf l5'. It says
-to generate all possible 256 bytes and interpret them as 'ISO-8859-9'
-codes, while converting them to 'UCS-2'. Resulting 'UCS-2' characters
-are dumped one per line, accompanied with their explicative name.
-
-\1f
-File: recode.info, Node: Internals, Next: Concept Index, Prev: Surfaces, Up: Top
-
-14 Internal aspects
-*******************
-
-The incoming explanations of the internals of Recode should help people
-who want to dive into Recode sources for adding new charsets. Adding
-new charsets does not require much knowledge about the overall
-organisation of Recode. You can rather concentrate of your new charset,
-letting the remainder of the Recode mechanics take care of
-interconnecting it with all others charsets.
-
- If you intend to play seriously at modifying Recode, beware that you
-may need some other GNU tools which were not required when you first
-installed Recode. If you modify or create any '.l' file, then you need
-Flex, and some better 'awk' like 'mawk', GNU 'awk', or 'nawk'. If you
-modify the documentation (and you should!), you need 'makeinfo'. If you
-are really audacious, you may also want Perl for modifying tabular
-processing, then 'm4', Autoconf, Automake and 'libtool' for adjusting
-configuration matters.
-
-* Menu:
-
-* Main flow:: Overall organisation
-* New charsets:: Adding new charsets
-* New surfaces:: Adding new surfaces
-* Design:: Comments on the library design
-
-\1f
-File: recode.info, Node: Main flow, Next: New charsets, Prev: Internals, Up: Internals
-
-14.1 Overall organisation
-=========================
-
-The Recode mechanics slowly evolved for many years, and it would be
-tedious to explain all problems I met and mistakes I did all along,
-yielding the current behaviour. Surely, one of the key choices was to
-stop trying to do all conversions in memory, one line or one buffer at a
-time. It has been fruitful to use the character stream paradigm, and
-the elementary recoding steps now convert a whole stream to another.
-Most of the control complexity in Recode exists so that each elementary
-recoding step stays simple, making easier to add new ones. The whole
-point of Recode, as I see it, is providing a comfortable nest for
-growing new charset conversions.
-
- The main Recode driver constructs, while initialising all conversion
-modules, a table giving all the conversion routines available ("single
-step"s) and for each, the starting charset and the ending charset. If
-we consider these charsets as being the nodes of a directed graph, each
-single step may be considered as oriented arc from one node to the
-other. A cost is attributed to each arc: for example, a high penalty is
-given to single steps which are prone to losing characters, a lower
-penalty is given to those which need studying more than one input
-character for producing an output character, etc.
-
- Given a starting code and a goal code, Recode computes the most
-economical route through the elementary recodings, that is, the best
-sequence of conversions that will transform the input charset into the
-final charset. To speed up execution, Recode looks for subsequences of
-conversions which are simple enough to be merged, and then dynamically
-creates new single steps to represent these mergings.
-
- A "double step" in Recode is a special concept representing a
-sequence of two single steps, the output of the first single step being
-the special charset 'UCS-2', the input of the second single step being
-also 'UCS-2'. Special Recode machinery dynamically produces efficient,
-reversible, merge-able single steps out of these double steps.
-
- I made some statistics about how many internal recoding steps are
-required between any two charsets chosen at random. The initial
-recoding layout, before optimisation, always uses between 1 and 5 steps.
-Optimisation could sometimes produce mere copies, which are counted as
-no steps at all. In other cases, optimisation is unable to save any
-step. The number of steps after optimisation is currently between 0 and
-5 steps. Of course, the _expected_ number of steps is affected by
-optimisation: it drops from 2.8 to 1.8. This means that Recode uses a
-theoretical average of a bit less than one step per recoding job. This
-looks good. This was computed using reversible recodings. In strict
-mode, optimisation might be defeated somewhat. Number of steps run
-between 1 and 6, both before and after optimisation, and the expected
-number of steps decreases by a lesser amount, going from 2.2 to 1.3.
-This is still manageable.
-
-\1f
-File: recode.info, Node: New charsets, Next: New surfaces, Prev: Main flow, Up: Internals
-
-14.2 Adding new charsets
-========================
-
-The main part of Recode is written in C, as are most single steps. A
-few single steps need to recognise sequences of multiple characters,
-they are often better written in Flex. It is easy for a programmer to
-add a new charset to Recode. All it requires is making a few functions
-kept in a single '.c' file, adjusting 'Makefile.am' and remaking Recode.
-
- One of the function should convert from any previous charset to the
-new one. Any previous charset will do, but try to select it so you will
-not lose too much information while converting. The other function
-should convert from the new charset to any older one. You do not have
-to select the same old charset than what you selected for the previous
-routine. Once again, select any charset for which you will not lose too
-much information while converting.
-
- If, for any of these two functions, you have to read multiple bytes
-of the old charset before recognising the character to produce, you
-might prefer programming it in Flex in a separate '.l' file. Prototype
-your C or Flex files after one of those which exist already, so to keep
-the sources uniform. Besides, at 'make' time, all '.l' files are
-automatically merged into a single big one by the script 'mergelex.awk'.
-
- There are a few hidden rules about how to write new Recode modules,
-for allowing the automatic creation of 'decsteps.h' and 'initsteps.h' at
-'make' time, or the proper merging of all Flex files. Mimetism is a
-simple approach which relieves me of explaining all these rules! Start
-with a module closely resembling what you intend to do. Here is some
-advice for picking up a model. First decide if your new charset module
-is to be be driven by algorithms rather than by tables. For algorithmic
-recodings, see 'iconqnx.c' for C code, or 'txtelat1.l' for Flex code.
-For table driven recodings, see 'ebcdic.c' for one-to-one style
-recodings, 'lat1html.c' for one-to-many style recodings, or 'atarist.c'
-for double-step style recodings. Just select an example from the style
-that better fits your application.
-
- Each of your source files should have its own initialisation
-function, named 'module_CHARSET', which is meant to be executed
-_quickly_ once, prior to any recoding. It should declare the name of
-your charsets and the single steps (or elementary recodings) you
-provide, by calling 'declare_step' one or more times. Besides the
-charset names, 'declare_step' expects a description of the recoding
-quality (see 'recodext.h') and two functions you also provide.
-
- The first such function has the purpose of allocating structures,
-pre-conditioning conversion tables, etc. It is also the way of further
-modifying the 'STEP' structure. This function is executed if and only
-if the single step is retained in an actual recoding sequence. If you
-do not need such delayed initialisation, merely use 'NULL' for the
-function argument.
-
- The second function executes the elementary recoding on a whole file.
-There are a few cases when you can spare writing this function:
-
- * Some single steps do nothing else than a pure copy of the input
- onto the output, in this case, you can use the predefined function
- 'file_one_to_one', while having a delayed initialisation for
- presetting the 'STEP' field 'one_to_one' to the predefined value
- 'one_to_same'.
-
- * Some single steps are driven by a table which recodes one character
- into another; if the recoding does nothing else, you can use the
- predefined function 'file_one_to_one', while having a delayed
- initialisation for presetting the 'STEP' field 'one_to_one' with
- your table.
-
- * Some single steps are driven by a table which recodes one character
- into a string; if the recoding does nothing else, you can use the
- predefined function 'file_one_to_many', while having a delayed
- initialisation for presetting the 'STEP' field 'one_to_many' with
- your table.
-
- If you have a recoding table handy in a suitable format but do not
-use one of the predefined recoding functions, it is still a good idea to
-use a delayed initialisation to save it anyway, because 'recode' option
-'-h' will take advantage of this information when available.
-
- Finally, edit 'Makefile.am' to add the source file name of your
-routines to the 'C_STEPS' or 'L_STEPS' macro definition, depending on
-the fact your routines is written in C or in Flex.
-
-\1f
-File: recode.info, Node: New surfaces, Next: Design, Prev: New charsets, Up: Internals
-
-14.3 Adding new surfaces
-========================
-
-Adding a new surface is technically quite similar to adding a new
-charset. *Note New charsets::. A surface is provided as a set of two
-transformations: one from the predefined special charset 'data' or
-'tree' to the new surface, meant to apply the surface, the other from
-the new surface to the predefined special charset 'data' or 'tree',
-meant to remove the surface.
-
- Internally in Recode, function 'declare_step' especially recognises
-when a charset is so related to 'data' or 'tree', and then takes
-appropriate actions so that charset gets indeed installed as a surface.
-
-\1f
-File: recode.info, Node: Design, Prev: New surfaces, Up: Internals
-
-14.4 Comments on the library design
-===================================
-
- * Why a shared library?
-
- There are many different approaches to reduce system requirements
- to handle all tables needed in the Recode library. One of them is
- to have the tables in an external format and only read them in on
- demand. After having pondered this for a while, I finally decided
- against it, mainly because it involves its own kind of installation
- complexity, and it is not clear to me that it would be as
- interesting as I first imagined.
-
- It looks more efficient to see all tables and algorithms already
- mapped into virtual memory from the start of the execution, yet not
- loaded in actual memory, than to go through many disk accesses for
- opening various data files once the program is already started, as
- this would be needed with other solutions. Using a shared library
- also has the indirect effect of making various algorithms handily
- available, right in the same modules providing the tables. This
- alleviates much the burden of the maintenance.
-
- Of course, I would like to later make an exception for only a few
- tables, built locally by users for their own particular needs once
- Recode is installed. Recode should just go and fetch them. But I
- do not perceive this as very urgent, yet useful enough to be worth
- implementing.
-
- Currently, all tables needed for recoding are precompiled into
- binaries, and all these binaries are then made into a shared
- library. As an initial step, I turned Recode into a main program
- and a non-shared library, this allowed me to tidy up the API, get
- rid of all global variables, etc. It required a surprising amount
- of program source massaging. But once this cleaned enough, it was
- easy to use Gordon Matzigkeit's 'libtool' package, and take
- advantage of the Automake interface to neatly turn the non-shared
- library into a shared one.
-
- Sites linking with the Recode library, whose system does not
- support any form of shared libraries, might end up with bulky
- executables. Surely, the Recode library will have to be used
- statically, and might not very nicely usable on such systems. It
- seems that progress has a price for those being slow at it.
-
- There is a locality problem I did not address yet. Currently, the
- Recode library takes many cycles to initialise itself, calling each
- module in turn for it to set up associated knowledge about
- charsets, aliases, elementary steps, recoding weights, etc.
- _Then_, the recoding sequence is decided out of the command given.
- I would not be surprised if initialisation was taking a perceivable
- fraction of a second on slower machines. One thing to do, most
- probably not right in version 3.5, but the version after, would
- have Recode to pre-load all tables and dump them at installation
- time. The result would then be compiled and added to the library.
- This would spare many initialisation cycles, but more importantly,
- would avoid calling all library modules, scattered through the
- virtual memory, and so, possibly causing many spurious page
- exceptions each time the initialisation is requested, at least once
- per program execution.
-
- * Why not a central charset?
-
- It would be simpler, and I would like, if something like ISO 10646
- was used as a turning template for all charsets in Recode. Even if
- I think it could help to a certain extent, I'm still not fully sure
- it would be sufficient in all cases. Moreover, some people
- disagree about using ISO 10646 as the central charset, to the point
- I cannot totally ignore them, and surely, Recode is not a mean for
- me to force my own opinions on people. I would like that Recode be
- practical more than dogmatic, and reflect usage more than
- religions.
-
- Currently, if you ask Recode to go from CHARSET1 to CHARSET2 chosen
- at random, it is highly probable that the best path will be quickly
- found as:
-
- CHARSET1..UCS-2..CHARSET2
-
- That is, it will almost always use the 'UCS' as a trampoline
- between charsets. However, 'UCS-2' will be immediately be
- optimised out, and CHARSET1..CHARSET2 will often be performed in a
- single step through a permutation table generated on the fly for
- the circumstance (1).
-
- In those few cases where 'UCS-2' is not selected as a conceptual
- intermediate, I plan to study if it could be made so. But I guess
- some cases will remain where 'UCS-2' is not a proper choice. Even
- if 'UCS' is often the good choice, I do not intend to forcefully
- restrain Recode around 'UCS-2' (nor 'UCS-4') for now. We might
- come to that one day, but it will come out of the natural evolution
- of Recode. It will then reflect a fact, rather than a preset
- dogma.
-
- * Why not 'iconv'?
-
- The 'iconv' routine and library allows for converting characters
- from an input buffer to an input buffer, synchronously advancing
- both buffer cursors. If the output buffer is not big enough to
- receive all of the conversion, the routine returns with the input
- cursor set at the position where the conversion could later be
- resumed, and the output cursor set to indicate until where the
- output buffer has been filled. Despite this scheme is simple and
- nice, the Recode library does not offer it currently. Why not?
-
- When long sequences of decodings, stepwise recodings, and
- re-encodings are involved, as it happens in true life,
- synchronising the input buffer back to where it should have
- stopped, when the output buffer becomes full, is a difficult
- problem. Oh, we could make it simpler at the expense of losing
- space or speed: by inserting markers between each input character
- and counting them at the output end; by processing only one
- character in a time through the whole sequence; by repeatedly
- attempting to recode various subsets of the input buffer, binary
- searching on their length until the output just fits. The overhead
- of such solutions looks prohibitive to me, and the gain very
- minimal. I do not see a real advantage, nowadays, imposing a fixed
- length to an output buffer. It makes things so much simpler and
- efficient to just let the output buffer size float a bit.
-
- Of course, if the above problem was solved, the 'iconv' library
- should be easily emulated, given that Recode has similar knowledge
- about charsets, of course. This either solved or not, the 'iconv'
- program remains trivial (given similar knowledge about charsets).
- I also presume that the 'genxlt' program would be easy too, but I
- do not have enough detailed specifications of it to be sure.
-
- A lot of years ago, Recode was using a similar scheme, and I found
- it rather hard to manage for some cases. I rethought the overall
- structure of Recode for getting away from that scheme, and never
- regretted it. I perceive 'iconv' as an artificial solution which
- surely has some elegances and virtues, but I do not find it really
- useful as it stands: one always has to wrap 'iconv' into something
- more refined, extending it for real cases. From past experience, I
- think it is unduly hard to fully implement this scheme. It would
- be awkward that we do contortions for the sole purpose of
- implementing exactly its specification, without real, properly
- grounded reasons (other then the fact some people once thought it
- was worth standardising). It is much better to immediately aim for
- the refinement we need, without uselessly forcing us into the
- dubious detour 'iconv' represents.
-
- Some may argue that if Recode was using a comprehensive charset as
- a turning template, as discussed in a previous point, this would
- make 'iconv' easier to implement. Some may be tempted to say that
- the cases which are hard to handle are not really needed, nor
- interesting, anyway. I feel and fear a bit some pressure wanting
- that Recode be split into the part that well fits the 'iconv'
- model, and the part that does not fit, considering this second part
- less important, with the idea of dropping it one of these days,
- maybe. My guess is that users of the Recode library, whatever its
- form, would not like to have such arbitrary limitations. In the
- long run, we should not have to explain to our users that some
- recodings may not be made available just because they do not fit
- the simple model we had in mind when we did it. Instead, we should
- try to stay open to the difficulties of real life. There is still
- a lot of complex needs for Asian people, say, that Recode does not
- currently address, while it should. Not only the doors should stay
- open, but we should force them wider!
-
- ---------- Footnotes ----------
-
- (1) If strict mapping is requested, another efficient device will be
-used instead of a permutation.
-
-\1f
-File: recode.info, Node: Concept Index, Next: Option Index, Prev: Internals, Up: Top
-
-Concept Index
-*************
-
-\0\b[index\0\b]
-* Menu:
-
-* abbreviated names for charsets and surfaces: Requests. (line 87)
-* adding new charsets: New charsets. (line 6)
-* adding new surfaces: New surfaces. (line 6)
-* African charsets: African. (line 6)
-* aliases: Requests. (line 79)
-* alternate names for charsets and surfaces: Requests. (line 79)
-* ambiguous output, error message: Errors. (line 33)
-* ASCII table, recreating with Recode: ASCII. (line 12)
-* Autoconf: Library. (line 31)
-* average number of recoding steps: Main flow. (line 40)
-* 'bool' data type: Library. (line 22)
-* box-drawing characters: Recoding. (line 16)
-* bug reports, where to send: Contributing. (line 37)
-* byte order mark: UCS-2. (line 12)
-* byte order swapping: Permutations. (line 6)
-* caret ASCII code: CDC-NOS. (line 9)
-* CDC charsets: CDC. (line 6)
-* CDC Display Code, a table: Display Code. (line 6)
-* chaining of charsets in a request: Requests. (line 22)
-* character entities: HTML. (line 6)
-* character entity references: HTML. (line 6)
-* character mnemonics, documentation: Tabular. (line 6)
-* character streams, description: dump-with-names. (line 6)
-* charset level functions: Charset level. (line 6)
-* charset names, valid characters: Requests. (line 10)
-* charset, default: Requests. (line 103)
-* charset, pure: Surface overview. (line 17)
-* charset, what it is: Introduction. (line 15)
-* charsets for CDC machines: CDC. (line 6)
-* charsets, aliases: Requests. (line 79)
-* charsets, chaining in a request: Requests. (line 22)
-* charsets, guessing: Listings. (line 65)
-* charsets, overview: Charset overview. (line 6)
-* 'chset' tools: Tabular. (line 6)
-* codepages: IBM and MS. (line 6)
-* combining characters: UCS-2. (line 33)
-* commutativity of surfaces: Requests. (line 56)
-* 'configure.ac': Library. (line 31)
-* contributing charsets: Contributing. (line 6)
-* conversions, unavailable: Charset overview. (line 33)
-* convert a subset of characters: Mixed. (line 20)
-* convert strings and comments: Mixed. (line 39)
-* copyright conditions, printing: Listings. (line 19)
-* counting characters: count-characters. (line 6)
-* CR surface, in Macintosh charsets: Apple-Mac. (line 15)
-* CR-LF surface, in IBM-PC charsets: IBM-PC. (line 30)
-* Ctrl-Z, discarding: End lines. (line 32)
-* Cyrillic charsets: Others. (line 6)
-* debugging surfaces: Test. (line 11)
-* default charset: Requests. (line 103)
-* description of individual characters: dump-with-names. (line 6)
-* details about recoding: Recoding. (line 35)
-* deviations from RFC 1345: Tabular. (line 14)
-* diacritics and underlines, removing: flat. (line 8)
-* diacritics, with 'ASCII-BS' charset: ASCII-BS. (line 9)
-* diaeresis: Recoding. (line 11)
-* disable map filling: Reversibility. (line 48)
-* double step: Main flow. (line 34)
-* dumping characters: Dump. (line 6)
-* dumping characters, with description: dump-with-names. (line 6)
-* Easy French: Texte. (line 20)
-* EBCDIC charsets: EBCDIC. (line 6)
-* end of line format: End lines. (line 6)
-* endiannes, changing: Permutations. (line 6)
-* entities: HTML. (line 6)
-* error handling: Errors. (line 6)
-* error level threshold: Errors. (line 100)
-* error messages: Errors. (line 6)
-* error messages, suppressing: Reversibility. (line 36)
-* exceptions to available conversions: Charset overview. (line 33)
-* exit status: Synopsis. (line 64)
-* file sequencing: Sequencing. (line 28)
-* file time stamps: Recoding. (line 26)
-* filter operation: Synopsis. (line 27)
-* force recoding: Reversibility. (line 10)
-* French description of charsets: Listings. (line 211)
-* guessing charsets: Listings. (line 65)
-* Haible, Bruno: iconv. (line 6)
-* handling errors: Errors. (line 6)
-* help page, printing: Listings. (line 14)
-* HTML: HTML. (line 6)
-* HTML normalization: HTML. (line 110)
-* IBM codepages: IBM and MS. (line 6)
-* IBM graphics characters: Recoding. (line 16)
-* 'iconv': Design. (line 98)
-* 'iconv' library: iconv. (line 6)
-* identifying subsets in charsets: Listings. (line 223)
-* ignore charsets: Recoding. (line 60)
-* implied surfaces: Requests. (line 68)
-* impossible conversions: Charset overview. (line 33)
-* information about charsets: Listings. (line 154)
-* initialisation functions, outer: Outer level. (line 45)
-* initialisation functions, request: Request level. (line 52)
-* initialisation functions, task: Task level. (line 56)
-* interface, with 'iconv' library: iconv. (line 6)
-* intermediate charsets: Requests. (line 22)
-* internal functions: Charset level. (line 6)
-* internal recoding bug, error message: Errors. (line 88)
-* internals: Internals. (line 6)
-* invalid input, error message: Errors. (line 65)
-* invocation of 'recode', synopsis: Synopsis. (line 6)
-* irreversible recoding: Reversibility. (line 10)
-* ISO 10646: Universal. (line 6)
-* languages, programming: Listings. (line 26)
-* LaTeX files: LaTeX. (line 6)
-* Latin charsets: ISO 8859. (line 6)
-* Latin-1 table, recreating with Recode: ISO 8859. (line 38)
-* leaks, memory: Outer level. (line 40)
-* letter case, in charset and surface names: Requests. (line 92)
-* 'libiconv': iconv. (line 6)
-* library, 'iconv': iconv. (line 6)
-* listing charsets: Listings. (line 154)
-* Macintosh charset: Apple-Mac. (line 6)
-* map filling: Reversibility. (line 96)
-* map filling, disable: Reversibility. (line 48)
-* markup language: HTML. (line 6)
-* memory leaks: Outer level. (line 40)
-* memory sequencing: Sequencing. (line 22)
-* MIME encodings: MIME. (line 6)
-* misuse of recoding library, error message: Errors. (line 82)
-* MS-DOS charsets: IBM-PC. (line 6)
-* MULE, in Emacs: Mule. (line 22)
-* multiplexed charsets: Mule. (line 6)
-* names of charsets and surfaces, abbreviation: Requests. (line 87)
-* new charsets, how to add: New charsets. (line 6)
-* new surfaces, how to add: New surfaces. (line 6)
-* NeXT charsets: Micros. (line 6)
-* non canonical input, error message: Errors. (line 20)
-* normilise an HTML file: HTML. (line 110)
-* NOS 6/12 code: CDC-NOS. (line 9)
-* numeric character references: HTML. (line 6)
-* outer level functions: Outer level. (line 6)
-* partial conversion: Mixed. (line 20)
-* permutations of groups of bytes: Permutations. (line 6)
-* pipe sequencing: Sequencing. (line 38)
-* portability: Library. (line 31)
-* programming language support: Listings. (line 26)
-* 'program_name' variable: Library. (line 11)
-* 'program_name' variable <1>: Outer level. (line 99)
-* pseudo-charsets: Charset overview. (line 33)
-* pure charset: Surface overview. (line 17)
-* quality of recoding: Recoding. (line 35)
-* Recode internals: Internals. (line 6)
-* Recode request syntax: Requests. (line 15)
-* Recode use, a tutorial: Tutorial. (line 6)
-* Recode version, printing: Listings. (line 10)
-* Recode, a Macintosh port: Apple-Mac. (line 46)
-* Recode, and RFC 1345: Tabular. (line 42)
-* Recode, main flow of operation: Main flow. (line 6)
-* 'recode', operation as filter: Synopsis. (line 27)
-* 'recode', synopsis of invocation: Synopsis. (line 6)
-* 'recode.h' header: Library. (line 11)
-* 'recodext.h' header: Task level. (line 46)
-* recoding details: Recoding. (line 35)
-* recoding library: Library. (line 6)
-* recoding path, rejection: Recoding. (line 60)
-* recoding steps, statistics: Main flow. (line 40)
-* removing diacritics and underlines: flat. (line 8)
-* reporting bugs: Contributing. (line 37)
-* request level functions: Request level. (line 6)
-* request, syntax: Requests. (line 15)
-* reversibility of recoding: Reversibility. (line 59)
-* RFC 1345: Tabular. (line 6)
-* RFC 2045: MIME. (line 6)
-* sequencing: Sequencing. (line 6)
-* SGML: HTML. (line 6)
-* shared library implementation: Design. (line 6)
-* silent operation: Reversibility. (line 36)
-* single step: Main flow. (line 17)
-* source file generation: Listings. (line 26)
-* speed considerations: Outer level. (line 32)
-* speed considerations <1>: Request level. (line 44)
-* status code: Synopsis. (line 64)
-* 'stdbool.h' header: Library. (line 22)
-* strict operation: Reversibility. (line 48)
-* string and comments conversion: Mixed. (line 39)
-* structural surfaces: Surfaces. (line 43)
-* subsets in charsets: Listings. (line 223)
-* super-charsets: Mule. (line 6)
-* supported programming languages: Listings. (line 26)
-* suppressing diagnostic messages: Reversibility. (line 36)
-* surface, what it is: Introduction. (line 31)
-* surface, what it is <1>: Surfaces. (line 6)
-* surfaces, aliases: Requests. (line 79)
-* surfaces, commutativity: Requests. (line 56)
-* surfaces, implementation in Recode: Surfaces. (line 34)
-* surfaces, implied: Requests. (line 68)
-* surfaces, overview: Surface overview. (line 6)
-* surfaces, structural: Surfaces. (line 43)
-* surfaces, syntax: Requests. (line 51)
-* surfaces, trees: Surfaces. (line 43)
-* system detected problem, error message: Errors. (line 76)
-* task execution: Task level. (line 222)
-* task level functions: Task level. (line 6)
-* TeX files: LaTeX. (line 6)
-* Texinfo files: Texinfo. (line 6)
-* threshold for error reporting: Errors. (line 100)
-* time stamps of files: Recoding. (line 26)
-* trivial surface: Surfaces. (line 14)
-* tutorial: Tutorial. (line 6)
-* unavailable conversions: Charset overview. (line 33)
-* Unicode: UCS-2. (line 6)
-* unknown charsets: Listings. (line 65)
-* unreachable charsets: Charset overview. (line 33)
-* untranslatable input, error message: Errors. (line 53)
-* valid characters in charset names: Requests. (line 10)
-* verbose operation: Recoding. (line 35)
-* Vietnamese charsets: Vietnamese. (line 6)
-* Web: HTML. (line 6)
-* World Wide Web: HTML. (line 6)
-* WWW: HTML. (line 6)
-* XML: HTML. (line 6)
-
-\1f
-File: recode.info, Node: Option Index, Next: Library Index, Prev: Concept Index, Up: Top
-
-Option Index
-************
-
-This is an alphabetical list of all command-line options accepted by
-'recode'.
-
-\0\b[index\0\b]
-* Menu:
-
-* --colons: Recoding. (line 11)
-* --copyright: Listings. (line 19)
-* --diacritics: Mixed. (line 20)
-* --find-subsets: Listings. (line 223)
-* --force: Reversibility. (line 10)
-* --graphics: Recoding. (line 16)
-* --header: Listings. (line 26)
-* --help: Listings. (line 14)
-* --ignore: Recoding. (line 60)
-* --known=: Listings. (line 65)
-* --list: Listings. (line 154)
-* --quiet: Reversibility. (line 36)
-* --sequence: Sequencing. (line 22)
-* --silent: Reversibility. (line 36)
-* --source: Mixed. (line 39)
-* --strict: Reversibility. (line 48)
-* --touch: Recoding. (line 26)
-* --verbose: Recoding. (line 35)
-* --version: Listings. (line 10)
-* -C: Listings. (line 19)
-* -c: Recoding. (line 11)
-* -d: Mixed. (line 20)
-* -f: Reversibility. (line 10)
-* -g: Recoding. (line 16)
-* -h: Listings. (line 26)
-* -i: Sequencing. (line 28)
-* -k: Listings. (line 65)
-* -l: Listings. (line 154)
-* -p: Sequencing. (line 38)
-* -q: Reversibility. (line 36)
-* -s: Reversibility. (line 48)
-* -S: Mixed. (line 39)
-* -T: Listings. (line 223)
-* -t: Recoding. (line 26)
-* -v: Recoding. (line 35)
-* -x: Recoding. (line 60)
-
-\1f
-File: recode.info, Node: Library Index, Next: Charset and Surface Index, Prev: Option Index, Up: Top
-
-Library Index
-*************
-
-This is an alphabetical index of important functions, data structures,
-and variables in the Recode library.
-
-\0\b[index\0\b]
-* Menu:
-
-* abort_level: Task level. (line 205)
-* ascii_graphics: Request level. (line 111)
-* byte_order_mark: Task level. (line 189)
-* declare_step: New surfaces. (line 13)
-* DEFAULT_CHARSET: Requests. (line 103)
-* diacritics_only: Request level. (line 102)
-* diaeresis_char: Request level. (line 86)
-* error_so_far: Task level. (line 217)
-* fail_level: Task level. (line 195)
-* file_one_to_many: New charsets. (line 70)
-* file_one_to_one: New charsets. (line 58)
-* find_charset: Charset level. (line 15)
-* LANG, when listing charsets: Listings. (line 211)
-* LANGUAGE, when listing charsets: Listings. (line 211)
-* list_all_charsets: Charset level. (line 15)
-* list_concise_charset: Charset level. (line 15)
-* list_full_charset: Charset level. (line 15)
-* make_header_flag: Request level. (line 93)
-* RECODE_AMBIGUOUS_OUTPUT: Errors. (line 33)
-* recode_buffer_to_buffer: Request level. (line 157)
-* recode_buffer_to_file: Request level. (line 157)
-* recode_delete_outer: Outer level. (line 50)
-* recode_delete_request: Request level. (line 57)
-* recode_delete_task: Task level. (line 58)
-* recode_file_to_buffer: Request level. (line 157)
-* recode_file_to_file: Request level. (line 157)
-* recode_filter_close: Task level. (line 224)
-* recode_filter_close, not available: Request level. (line 223)
-* recode_filter_open: Task level. (line 224)
-* recode_filter_open, not available: Request level. (line 223)
-* recode_format_table: Request level. (line 238)
-* RECODE_INTERNAL_ERROR: Errors. (line 88)
-* RECODE_INVALID_INPUT: Errors. (line 65)
-* RECODE_MAXIMUM_ERROR: Task level. (line 205)
-* RECODE_MAXIMUM_ERROR <1>: Errors. (line 96)
-* recode_new_outer: Outer level. (line 50)
-* recode_new_request: Request level. (line 57)
-* recode_new_task: Task level. (line 58)
-* RECODE_NOT_CANONICAL: Errors. (line 20)
-* RECODE_NO_ERROR: Errors. (line 16)
-* RECODE_OUTER structure: Outer level. (line 26)
-* recode_perform_task: Task level. (line 224)
-* RECODE_REQUEST structure: Request level. (line 39)
-* recode_request structure: Request level. (line 69)
-* recode_scan_request: Request level. (line 121)
-* RECODE_SEQUENCE_IN_MEMORY: Task level. (line 178)
-* RECODE_SEQUENCE_WITH_FILES: Task level. (line 180)
-* RECODE_SEQUENCE_WITH_PIPE: Task level. (line 182)
-* RECODE_STRATEGY_UNDECIDED: Task level. (line 171)
-* recode_string: Request level. (line 150)
-* recode_string_to_buffer: Request level. (line 157)
-* recode_string_to_file: Request level. (line 157)
-* RECODE_SYSTEM_ERROR: Errors. (line 76)
-* RECODE_TASK structure: Task level. (line 50)
-* RECODE_UNTRANSLATABLE: Errors. (line 53)
-* RECODE_USER_ERROR: Errors. (line 82)
-* strategy: Task level. (line 171)
-* task_request structure: Task level. (line 85)
-* verbose_flag: Request level. (line 81)
-
-\1f
-File: recode.info, Node: Charset and Surface Index, Prev: Library Index, Up: Top
-
-Charset and Surface Index
-*************************
-
-This is an alphabetical list of all the charsets and surfaces supported
-by Recode, and their aliases.
-
-\0\b[index\0\b]
-* Menu:
-
-* 037: Tabular. (line 222)
-* 038: Tabular. (line 227)
-* 1004: Tabular. (line 231)
-* 1026: Tabular. (line 235)
-* 1047: Tabular. (line 239)
-* 10646: UCS-4. (line 10)
-* 1129, not available: Vietnamese. (line 30)
-* 1250: Tabular. (line 89)
-* 1251: Tabular. (line 93)
-* 1252: Tabular. (line 97)
-* 1253: Tabular. (line 101)
-* 1254: Tabular. (line 105)
-* 1255: Tabular. (line 109)
-* 1256: Tabular. (line 113)
-* 1257: Tabular. (line 117)
-* 1258, not available: Vietnamese. (line 30)
-* 1345: Tabular. (line 53)
-* 1866: HTML. (line 37)
-* 2070: HTML. (line 46)
-* 21-Permutation: Permutations. (line 15)
-* 256: Tabular. (line 244)
-* 273: Tabular. (line 248)
-* 274: Tabular. (line 252)
-* 275: Tabular. (line 256)
-* 278: Tabular. (line 264)
-* 280: Tabular. (line 268)
-* 281: Tabular. (line 272)
-* 284: Tabular. (line 276)
-* 285: Tabular. (line 280)
-* 290: Tabular. (line 284)
-* 297: Tabular. (line 288)
-* 367: Tabular. (line 72)
-* 420: Tabular. (line 292)
-* 423: Tabular. (line 297)
-* 424: Tabular. (line 301)
-* 4321-Permutation: Permutations. (line 19)
-* 437: Tabular. (line 305)
-* 500: Tabular. (line 309)
-* 500V1: Tabular. (line 309)
-* 64: MIME. (line 11)
-* 819: Tabular. (line 422)
-* 850: Tabular. (line 314)
-* 851: Tabular. (line 318)
-* 852: Tabular. (line 322)
-* 855: Tabular. (line 326)
-* 857: Tabular. (line 330)
-* 860: Tabular. (line 334)
-* 861: Tabular. (line 338)
-* 862: Tabular. (line 342)
-* 863: Tabular. (line 346)
-* 864: Tabular. (line 350)
-* 865: Tabular. (line 354)
-* 868: Tabular. (line 358)
-* 869: Tabular. (line 362)
-* 870: Tabular. (line 366)
-* 871: Tabular. (line 371)
-* 875: Tabular. (line 375)
-* 880: Tabular. (line 379)
-* 891: Tabular. (line 383)
-* 903: Tabular. (line 387)
-* 904: Tabular. (line 391)
-* 905: Tabular. (line 395)
-* 912: Tabular. (line 447)
-* 918: Tabular. (line 399)
-* AFRFUL-102-BPI_OCIL, and aliases: African. (line 10)
-* AFRFUL-103-BPI_OCIL, and aliases: African. (line 10)
-* AFRL1-101-BPI_OCIL: African. (line 24)
-* AFRLIN-104-BPI_OCIL: African. (line 17)
-* AFRLIN-105-BPI_OCIL: African. (line 17)
-* ANSI_X3.110-1983, not recognised by recode: Tabular. (line 21)
-* ANSI_X3.4-1968, aliases and source: Tabular. (line 72)
-* ANSI_X3.4-1968, and its aliases: ASCII. (line 6)
-* ANSI_X3.4-1986: Tabular. (line 72)
-* Apple-Mac: Apple-Mac. (line 6)
-* arabic: Tabular. (line 467)
-* arabic7: Tabular. (line 77)
-* ASCII: Requests. (line 103)
-* ASCII <1>: Tabular. (line 72)
-* ASCII, an alias for the ANSI_X3.4-1968 charset: ASCII. (line 6)
-* ASCII-BS, and its aliases: ASCII-BS. (line 6)
-* ASMO-708: Tabular. (line 467)
-* ASMO_449, aliases and source: Tabular. (line 77)
-* AtariST: AtariST. (line 6)
-* b64: MIME. (line 11)
-* baltic, aliases and source: Tabular. (line 663)
-* bambara: African. (line 10)
-* Bang-Bang: Bang-Bang. (line 6)
-* Base64: MIME. (line 11)
-* BMP: UCS-2. (line 29)
-* bra: African. (line 10)
-* BS, an alias for ASCII-BS charset: ASCII-BS. (line 6)
-* BS_4730, aliases and source: Tabular. (line 81)
-* BS_viewdata, aliases and source: Tabular. (line 85)
-* ca: Tabular. (line 121)
-* CDC-NOS, and its aliases: CDC-NOS. (line 6)
-* CHAR: Requests. (line 103)
-* cl: End lines. (line 37)
-* cn: Tabular. (line 214)
-* combined-UCS-2: UCS-2. (line 33)
-* CORK: Others. (line 28)
-* count-characters: count-characters. (line 6)
-* count-characters, not as before charset: Charset overview. (line 33)
-* cp-ar: Tabular. (line 358)
-* cp-gr: Tabular. (line 362)
-* cp-hu: Tabular. (line 137)
-* cp-is: Tabular. (line 338)
-* CP037: Tabular. (line 222)
-* CP038: Tabular. (line 227)
-* CP1004: Tabular. (line 231)
-* CP1026: Tabular. (line 235)
-* CP1047: Tabular. (line 239)
-* CP1129, not available: Vietnamese. (line 30)
-* CP1250, aliases and source: Tabular. (line 89)
-* CP1251, aliases and source: Tabular. (line 93)
-* CP1252, aliases and source: Tabular. (line 97)
-* CP1253, aliases and source: Tabular. (line 101)
-* CP1254, aliases and source: Tabular. (line 105)
-* CP1255, aliases and source: Tabular. (line 109)
-* CP1256, aliases and source: Tabular. (line 113)
-* CP1257, aliases and source: Tabular. (line 117)
-* CP1258, not available: Vietnamese. (line 30)
-* CP256: Tabular. (line 244)
-* CP273: Tabular. (line 248)
-* CP274: Tabular. (line 252)
-* CP275: Tabular. (line 256)
-* CP278: Tabular. (line 264)
-* CP280: Tabular. (line 268)
-* CP281: Tabular. (line 272)
-* CP284: Tabular. (line 276)
-* CP285: Tabular. (line 280)
-* CP290: Tabular. (line 284)
-* CP297: Tabular. (line 288)
-* CP367: Tabular. (line 72)
-* cp367: ASCII. (line 6)
-* CP420: Tabular. (line 292)
-* CP423: Tabular. (line 297)
-* CP424: Tabular. (line 301)
-* CP437: Tabular. (line 305)
-* CP500: Tabular. (line 309)
-* CP819: Tabular. (line 422)
-* CP850: Tabular. (line 314)
-* CP851: Tabular. (line 318)
-* CP852: Tabular. (line 322)
-* CP855: Tabular. (line 326)
-* CP857: Tabular. (line 330)
-* CP860: Tabular. (line 334)
-* CP861: Tabular. (line 338)
-* CP862: Tabular. (line 342)
-* CP863: Tabular. (line 346)
-* CP864: Tabular. (line 350)
-* CP865: Tabular. (line 354)
-* CP868: Tabular. (line 358)
-* CP869: Tabular. (line 362)
-* CP870: Tabular. (line 366)
-* CP871: Tabular. (line 371)
-* CP875: Tabular. (line 375)
-* CP880: Tabular. (line 379)
-* CP891: Tabular. (line 383)
-* CP903: Tabular. (line 387)
-* CP904: Tabular. (line 391)
-* CP905: Tabular. (line 395)
-* CP912: Tabular. (line 447)
-* CP918: Tabular. (line 399)
-* CR, a surface: End lines. (line 13)
-* CR-LF, a surface: End lines. (line 27)
-* csa7-1: Tabular. (line 121)
-* csa7-2: Tabular. (line 125)
-* CSA_Z243.4-1985-1, aliases and source: Tabular. (line 121)
-* CSA_Z243.4-1985-2, aliases and source: Tabular. (line 125)
-* CSA_Z243.4-1985-gr, aliases and source: Tabular. (line 129)
-* CSN_369103, aliases and source: Tabular. (line 133)
-* cuba: Tabular. (line 619)
-* CWI, aliases and source: Tabular. (line 137)
-* CWI-2: Tabular. (line 137)
-* cyrillic: Tabular. (line 462)
-* d1: Dump. (line 45)
-* d2: Dump. (line 52)
-* d4: Dump. (line 59)
-* data, a special charset: Surfaces. (line 34)
-* data, not with charsets: Charset overview. (line 33)
-* de: Tabular. (line 145)
-* dec: Tabular. (line 141)
-* DEC-MCS, aliases and source: Tabular. (line 141)
-* Decimal-1: Dump. (line 45)
-* Decimal-2: Dump. (line 52)
-* Decimal-4: Dump. (line 59)
-* DIN_66003, aliases and source: Tabular. (line 145)
-* dk: Tabular. (line 149)
-* dk-us, not recognised by recode: Tabular. (line 18)
-* dos: IBM-PC. (line 6)
-* DS2089: Tabular. (line 149)
-* DS_2089, aliases and source: Tabular. (line 149)
-* dump-with-names: dump-with-names. (line 6)
-* dump-with-names, not as before charset: Charset overview. (line 33)
-* e13b: Tabular. (line 491)
-* EBCDIC, a charset: EBCDIC. (line 12)
-* EBCDIC-AT-DE, aliases and source: Tabular. (line 153)
-* EBCDIC-AT-DE-A, aliases and source: Tabular. (line 156)
-* EBCDIC-BE: Tabular. (line 252)
-* EBCDIC-BR: Tabular. (line 256)
-* EBCDIC-CA-FR, aliases and source: Tabular. (line 159)
-* EBCDIC-CCC: EBCDIC. (line 19)
-* ebcdic-cp-ar1: Tabular. (line 292)
-* ebcdic-cp-ar2: Tabular. (line 399)
-* ebcdic-cp-be: Tabular. (line 309)
-* ebcdic-cp-ca: Tabular. (line 222)
-* ebcdic-cp-ch: Tabular. (line 309)
-* EBCDIC-CP-DK: Tabular. (line 260)
-* ebcdic-cp-es: Tabular. (line 276)
-* ebcdic-cp-fi: Tabular. (line 264)
-* ebcdic-cp-fr: Tabular. (line 288)
-* ebcdic-cp-gb: Tabular. (line 280)
-* ebcdic-cp-gr: Tabular. (line 297)
-* ebcdic-cp-he: Tabular. (line 301)
-* ebcdic-cp-is: Tabular. (line 371)
-* ebcdic-cp-it: Tabular. (line 268)
-* ebcdic-cp-nl: Tabular. (line 222)
-* EBCDIC-CP-NO: Tabular. (line 260)
-* ebcdic-cp-roece: Tabular. (line 366)
-* ebcdic-cp-se: Tabular. (line 264)
-* ebcdic-cp-tr: Tabular. (line 395)
-* ebcdic-cp-us: Tabular. (line 222)
-* ebcdic-cp-wt: Tabular. (line 222)
-* ebcdic-cp-yu: Tabular. (line 366)
-* EBCDIC-Cyrillic: Tabular. (line 379)
-* EBCDIC-DK-NO, aliases and source: Tabular. (line 162)
-* EBCDIC-DK-NO-A, aliases and source: Tabular. (line 165)
-* EBCDIC-ES, aliases and source: Tabular. (line 168)
-* EBCDIC-ES-A, aliases and source: Tabular. (line 171)
-* EBCDIC-ES-S, aliases and source: Tabular. (line 174)
-* EBCDIC-FI-SE, aliases and source: Tabular. (line 177)
-* EBCDIC-FI-SE-A, aliases and source: Tabular. (line 180)
-* EBCDIC-FR, aliases and source: Tabular. (line 183)
-* EBCDIC-Greek: Tabular. (line 375)
-* EBCDIC-IBM: EBCDIC. (line 24)
-* EBCDIC-INT: Tabular. (line 227)
-* EBCDIC-INT1: Tabular. (line 244)
-* EBCDIC-IS-FRISS, aliases and source: Tabular. (line 186)
-* EBCDIC-IT, aliases and source: Tabular. (line 190)
-* EBCDIC-JP-E: Tabular. (line 272)
-* EBCDIC-JP-kana: Tabular. (line 284)
-* EBCDIC-PT, aliases and source: Tabular. (line 193)
-* EBCDIC-UK, aliases and source: Tabular. (line 196)
-* EBCDIC-US, aliases and source: Tabular. (line 199)
-* ECMA-113: Tabular. (line 202)
-* ECMA-113(1986): Tabular. (line 202)
-* ECMA-114: Tabular. (line 467)
-* ECMA-118: Tabular. (line 472)
-* ECMA-cyrillic, aliases and source: Tabular. (line 202)
-* ELOT_928: Tabular. (line 472)
-* ES, aliases and source: Tabular. (line 206)
-* ES2, aliases and source: Tabular. (line 210)
-* ewondo: African. (line 10)
-* FI: Tabular. (line 651)
-* flat, a charset: flat. (line 6)
-* flat, not as before charset: Charset overview. (line 33)
-* fr: Tabular. (line 623)
-* friss: Tabular. (line 186)
-* FSS_UTF: UTF-8. (line 82)
-* fulfude: African. (line 10)
-* gb: Tabular. (line 81)
-* GB_1988-80, aliases and source: Tabular. (line 214)
-* GB_2312-80, not recognised by recode: Tabular. (line 25)
-* GOST_19768-74: Tabular. (line 577)
-* GOST_19768-87, aliases and source: Tabular. (line 218)
-* greek: Tabular. (line 472)
-* greek-ccitt, aliases and source: Tabular. (line 667)
-* greek7, aliases and source: Tabular. (line 671)
-* greek7-old, aliases and source: Tabular. (line 675)
-* greek8: Tabular. (line 472)
-* h: HTML. (line 63)
-* h0: HTML. (line 27)
-* h1: HTML. (line 33)
-* h2: HTML. (line 37)
-* h3: HTML. (line 56)
-* h4: HTML. (line 63)
-* hebrew: Tabular. (line 477)
-* Hexadecimal-1: Dump. (line 66)
-* Hexadecimal-2: Dump. (line 73)
-* Hexadecimal-4: Dump. (line 80)
-* hp-roman8, aliases and source: Tabular. (line 679)
-* HTML-i18n: HTML. (line 46)
-* HTML_1.1: HTML. (line 33)
-* HTML_2.0: HTML. (line 37)
-* HTML_3.2: HTML. (line 56)
-* hu: Tabular. (line 599)
-* IBM-PC: IBM-PC. (line 6)
-* IBM-PC charset, and CR-LF surface: Requests. (line 68)
-* IBM037, aliases and source: Tabular. (line 222)
-* IBM038, aliases and source: Tabular. (line 227)
-* IBM1004, aliases and source: Tabular. (line 231)
-* IBM1026, aliases and source: Tabular. (line 235)
-* IBM1047, aliases and source: Tabular. (line 239)
-* IBM256, aliases and source: Tabular. (line 244)
-* IBM273, aliases and source: Tabular. (line 248)
-* IBM274, aliases and source: Tabular. (line 252)
-* IBM275, aliases and source: Tabular. (line 256)
-* IBM277, aliases and source: Tabular. (line 260)
-* IBM278, aliases and source: Tabular. (line 264)
-* IBM280, aliases and source: Tabular. (line 268)
-* IBM281, aliases and source: Tabular. (line 272)
-* IBM284, aliases and source: Tabular. (line 276)
-* IBM285, aliases and source: Tabular. (line 280)
-* IBM290, aliases and source: Tabular. (line 284)
-* IBM297, aliases and source: Tabular. (line 288)
-* IBM367: Tabular. (line 72)
-* IBM367 <1>: ASCII. (line 6)
-* IBM420, aliases and source: Tabular. (line 292)
-* IBM423, aliases and source: Tabular. (line 297)
-* IBM424, aliases and source: Tabular. (line 301)
-* ibm437: IBM-PC. (line 36)
-* IBM437, aliases and source: Tabular. (line 305)
-* IBM500, aliases and source: Tabular. (line 309)
-* IBM819: Tabular. (line 422)
-* IBM819, and CR-LF surface: IBM-PC. (line 30)
-* IBM850, aliases and source: Tabular. (line 314)
-* IBM851, aliases and source: Tabular. (line 318)
-* IBM852, aliases and source: Tabular. (line 322)
-* IBM855, aliases and source: Tabular. (line 326)
-* IBM857, aliases and source: Tabular. (line 330)
-* IBM860, aliases and source: Tabular. (line 334)
-* IBM861, aliases and source: Tabular. (line 338)
-* IBM862, aliases and source: Tabular. (line 342)
-* IBM863, aliases and source: Tabular. (line 346)
-* IBM864, aliases and source: Tabular. (line 350)
-* IBM865, aliases and source: Tabular. (line 354)
-* IBM868, aliases and source: Tabular. (line 358)
-* IBM869, aliases and source: Tabular. (line 362)
-* IBM870, aliases and source: Tabular. (line 366)
-* IBM871, aliases and source: Tabular. (line 371)
-* IBM875, aliases and source: Tabular. (line 375)
-* IBM880, aliases and source: Tabular. (line 379)
-* IBM891, aliases and source: Tabular. (line 383)
-* IBM903, aliases and source: Tabular. (line 387)
-* IBM904, aliases and source: Tabular. (line 391)
-* IBM905, aliases and source: Tabular. (line 395)
-* IBM912: Tabular. (line 447)
-* IBM918, aliases and source: Tabular. (line 399)
-* Icon-QNX, and aliases: Icon-QNX. (line 6)
-* iconv: iconv. (line 20)
-* iconv, not in requests: Charset overview. (line 33)
-* IEC_P27-1, aliases and source: Tabular. (line 403)
-* INIS, aliases and source: Tabular. (line 407)
-* INIS-8, aliases and source: Tabular. (line 411)
-* INIS-cyrillic, aliases and source: Tabular. (line 415)
-* INVARIANT, aliases and source: Tabular. (line 419)
-* irv: Tabular. (line 511)
-* ISO-10646-UCS-2, and aliases: UCS-2. (line 29)
-* ISO-10646-UCS-4, and aliases: UCS-4. (line 10)
-* ISO-8859-1, aliases and source: Tabular. (line 422)
-* ISO-8859-10, aliases and source: Tabular. (line 427)
-* ISO-8859-13, aliases and source: Tabular. (line 432)
-* ISO-8859-14, aliases and source: Tabular. (line 437)
-* ISO-8859-15, aliases and source: Tabular. (line 442)
-* ISO-8859-2, aliases and source: Tabular. (line 447)
-* ISO-8859-3, aliases and source: Tabular. (line 452)
-* ISO-8859-4, aliases and source: Tabular. (line 457)
-* ISO-8859-5, aliases and source: Tabular. (line 462)
-* ISO-8859-6, aliases and source: Tabular. (line 467)
-* ISO-8859-7, aliases and source: Tabular. (line 472)
-* ISO-8859-8, aliases and source: Tabular. (line 477)
-* ISO-8859-9, aliases and source: Tabular. (line 482)
-* iso-baltic: Tabular. (line 432)
-* iso-celtic: Tabular. (line 437)
-* iso-ir-10: Tabular. (line 651)
-* iso-ir-100: Tabular. (line 422)
-* iso-ir-101: Tabular. (line 447)
-* iso-ir-102: Tabular. (line 659)
-* iso-ir-109: Tabular. (line 452)
-* iso-ir-11: Tabular. (line 655)
-* iso-ir-110: Tabular. (line 457)
-* iso-ir-111: Tabular. (line 202)
-* iso-ir-121: Tabular. (line 121)
-* iso-ir-122: Tabular. (line 125)
-* iso-ir-123: Tabular. (line 129)
-* iso-ir-126: Tabular. (line 472)
-* iso-ir-127: Tabular. (line 467)
-* iso-ir-13: Tabular. (line 527)
-* iso-ir-138: Tabular. (line 477)
-* iso-ir-139: Tabular. (line 133)
-* iso-ir-14: Tabular. (line 531)
-* iso-ir-141: Tabular. (line 562)
-* iso-ir-143: Tabular. (line 403)
-* iso-ir-144: Tabular. (line 462)
-* iso-ir-146: Tabular. (line 570)
-* iso-ir-147: Tabular. (line 566)
-* iso-ir-148: Tabular. (line 482)
-* iso-ir-15: Tabular. (line 523)
-* iso-ir-150: Tabular. (line 667)
-* iso-ir-151: Tabular. (line 619)
-* iso-ir-152: Tabular. (line 515)
-* iso-ir-153: Tabular. (line 218)
-* iso-ir-154: Tabular. (line 519)
-* iso-ir-155: Tabular. (line 487)
-* iso-ir-157: Tabular. (line 427)
-* iso-ir-158: Tabular. (line 697)
-* iso-ir-16: Tabular. (line 643)
-* iso-ir-17: Tabular. (line 206)
-* iso-ir-170: Tabular. (line 419)
-* iso-ir-179: Tabular. (line 663)
-* iso-ir-179a: Tabular. (line 432)
-* iso-ir-18: Tabular. (line 675)
-* iso-ir-19: Tabular. (line 684)
-* iso-ir-199: Tabular. (line 437)
-* iso-ir-2: Tabular. (line 511)
-* iso-ir-203: Tabular. (line 442)
-* iso-ir-21: Tabular. (line 145)
-* iso-ir-25: Tabular. (line 627)
-* iso-ir-27: Tabular. (line 595)
-* iso-ir-37: Tabular. (line 495)
-* iso-ir-4: Tabular. (line 81)
-* iso-ir-47: Tabular. (line 85)
-* iso-ir-49: Tabular. (line 407)
-* iso-ir-50: Tabular. (line 411)
-* iso-ir-51: Tabular. (line 415)
-* iso-ir-54: Tabular. (line 499)
-* iso-ir-55: Tabular. (line 503)
-* iso-ir-57: Tabular. (line 214)
-* iso-ir-6: Tabular. (line 72)
-* iso-ir-6 <1>: ASCII. (line 6)
-* iso-ir-60: Tabular. (line 631)
-* iso-ir-61: Tabular. (line 635)
-* iso-ir-69: Tabular. (line 623)
-* iso-ir-8-1: Tabular. (line 611)
-* iso-ir-8-2: Tabular. (line 615)
-* iso-ir-84: Tabular. (line 647)
-* iso-ir-85: Tabular. (line 210)
-* iso-ir-86: Tabular. (line 599)
-* iso-ir-88: Tabular. (line 671)
-* iso-ir-89: Tabular. (line 77)
-* iso-ir-9-1: Tabular. (line 603)
-* iso-ir-9-2: Tabular. (line 607)
-* iso-ir-90, not recognised by recode: Tabular. (line 21)
-* iso-ir-93: Tabular. (line 543)
-* iso-ir-94: Tabular. (line 547)
-* iso-ir-95: Tabular. (line 551)
-* iso-ir-96: Tabular. (line 555)
-* iso-ir-98: Tabular. (line 491)
-* ISO646-CA: Tabular. (line 121)
-* ISO646-CA2: Tabular. (line 125)
-* ISO646-CN: Tabular. (line 214)
-* ISO646-CU: Tabular. (line 619)
-* ISO646-DE: Tabular. (line 145)
-* ISO646-DK: Tabular. (line 149)
-* ISO646-ES: Tabular. (line 206)
-* ISO646-ES2: Tabular. (line 210)
-* ISO646-FI: Tabular. (line 651)
-* ISO646-FR: Tabular. (line 623)
-* ISO646-FR1: Tabular. (line 627)
-* ISO646-GB: Tabular. (line 81)
-* ISO646-HU: Tabular. (line 599)
-* ISO646-IT: Tabular. (line 523)
-* ISO646-JP: Tabular. (line 531)
-* ISO646-JP-OCR-B: Tabular. (line 539)
-* ISO646-KR: Tabular. (line 592)
-* ISO646-NO: Tabular. (line 631)
-* ISO646-NO2: Tabular. (line 635)
-* ISO646-PT: Tabular. (line 643)
-* ISO646-PT2: Tabular. (line 647)
-* ISO646-SE: Tabular. (line 651)
-* ISO646-SE2: Tabular. (line 655)
-* ISO646-US: Tabular. (line 72)
-* ISO646-YU: Tabular. (line 562)
-* ISO8859-1: Tabular. (line 422)
-* ISO8859-10: Tabular. (line 427)
-* ISO8859-13: Tabular. (line 432)
-* ISO8859-14: Tabular. (line 437)
-* ISO8859-15: Tabular. (line 442)
-* ISO8859-2: Tabular. (line 447)
-* ISO8859-3: Tabular. (line 452)
-* ISO8859-4: Tabular. (line 457)
-* ISO8859-5: Tabular. (line 462)
-* ISO8859-6: Tabular. (line 467)
-* ISO8859-7: Tabular. (line 472)
-* ISO8859-8: Tabular. (line 477)
-* ISO8859-9: Tabular. (line 482)
-* isoir91: Tabular. (line 29)
-* isoir92: Tabular. (line 29)
-* ISO_10367-box, aliases and source: Tabular. (line 487)
-* ISO_10646: UCS-4. (line 10)
-* ISO_2033-1983, aliases and source: Tabular. (line 491)
-* ISO_5427(1981): Tabular. (line 499)
-* ISO_5427, aliases and source: Tabular. (line 495)
-* ISO_5427-ext, aliases and source: Tabular. (line 499)
-* ISO_5428(1980): Tabular. (line 503)
-* ISO_5428, aliases and source: Tabular. (line 503)
-* ISO_646.basic(1983): Tabular. (line 507)
-* ISO_646.basic, aliases and source: Tabular. (line 507)
-* ISO_646.irv(1983): Tabular. (line 511)
-* ISO_646.irv(1991): Tabular. (line 72)
-* ISO_646.irv, aliases and source: Tabular. (line 511)
-* ISO_6937-2-25, aliases and source: Tabular. (line 515)
-* ISO_6937-2-add, not recognised by recode: Tabular. (line 21)
-* ISO_8859-1: Tabular. (line 422)
-* ISO_8859-1(1987): Tabular. (line 422)
-* ISO_8859-10: Tabular. (line 427)
-* ISO_8859-10(1993): Tabular. (line 427)
-* ISO_8859-13: Tabular. (line 432)
-* ISO_8859-13(1998): Tabular. (line 432)
-* ISO_8859-14: Tabular. (line 437)
-* ISO_8859-14(1998): Tabular. (line 437)
-* ISO_8859-15: Tabular. (line 442)
-* ISO_8859-15(1998): Tabular. (line 442)
-* ISO_8859-2: Tabular. (line 447)
-* ISO_8859-2(1987): Tabular. (line 447)
-* ISO_8859-3: Tabular. (line 452)
-* ISO_8859-3(1988): Tabular. (line 452)
-* ISO_8859-4: Tabular. (line 457)
-* ISO_8859-4(1988): Tabular. (line 457)
-* ISO_8859-5: Tabular. (line 462)
-* ISO_8859-5(1988): Tabular. (line 462)
-* ISO_8859-6: Tabular. (line 467)
-* ISO_8859-6(1987): Tabular. (line 467)
-* ISO_8859-7: Tabular. (line 472)
-* ISO_8859-7(1987): Tabular. (line 472)
-* ISO_8859-8: Tabular. (line 477)
-* ISO_8859-8(1988): Tabular. (line 477)
-* ISO_8859-9: Tabular. (line 482)
-* ISO_8859-9(1989): Tabular. (line 482)
-* ISO_8859-supp, aliases and source: Tabular. (line 519)
-* ISO_9036: Tabular. (line 77)
-* IT, aliases and source: Tabular. (line 523)
-* Java: Java. (line 6)
-* JIS_C6220-1969: Tabular. (line 527)
-* JIS_C6220-1969-jp, aliases and source: Tabular. (line 527)
-* JIS_C6220-1969-ro, aliases and source: Tabular. (line 531)
-* JIS_C6226-1978, not recognised by recode: Tabular. (line 25)
-* JIS_C6229-1984-a, aliases and source: Tabular. (line 535)
-* JIS_C6229-1984-b, aliases and source: Tabular. (line 539)
-* JIS_C6229-1984-b-add, aliases and source: Tabular. (line 543)
-* JIS_C6229-1984-hand, aliases and source: Tabular. (line 547)
-* JIS_C6229-1984-hand-add, aliases and source: Tabular. (line 551)
-* JIS_C6229-1984-kana, aliases and source: Tabular. (line 555)
-* JIS_X0201, aliases and source: Tabular. (line 559)
-* JIS_X0212-1990, not recognised by recode: Tabular. (line 25)
-* jp: Tabular. (line 531)
-* jp-ocr-a: Tabular. (line 535)
-* jp-ocr-b: Tabular. (line 539)
-* jp-ocr-b-add: Tabular. (line 543)
-* jp-ocr-hand: Tabular. (line 547)
-* jp-ocr-hand-add: Tabular. (line 551)
-* js: Tabular. (line 562)
-* JUS_I.B1.002, aliases and source: Tabular. (line 562)
-* JUS_I.B1.003-mac, aliases and source: Tabular. (line 566)
-* JUS_I.B1.003-serb, aliases and source: Tabular. (line 570)
-* Kamenicky: Others. (line 24)
-* katakana: Tabular. (line 527)
-* KEYBCS2: Others. (line 24)
-* KOI-7, aliases and source: Tabular. (line 574)
-* KOI-8, aliases and source: Tabular. (line 577)
-* KOI-8_CS2: Others. (line 32)
-* KOI-8_L2: Tabular. (line 133)
-* KOI8-R, aliases and source: Tabular. (line 581)
-* KOI8-RU, aliases and source: Tabular. (line 585)
-* KOI8-U, aliases and source: Tabular. (line 588)
-* koi8l2: Tabular. (line 133)
-* KSC5636, aliases and source: Tabular. (line 592)
-* KS_C_5601-1987, not recognised by recode: Tabular. (line 25)
-* l1: Tabular. (line 422)
-* l2: Tabular. (line 447)
-* l3: Tabular. (line 452)
-* l4: Tabular. (line 457)
-* l5: Tabular. (line 482)
-* L6: Tabular. (line 427)
-* l7: Tabular. (line 432)
-* l8: Tabular. (line 437)
-* l9: Tabular. (line 442)
-* lap: Tabular. (line 697)
-* LaTeX, a charset: LaTeX. (line 6)
-* Latin-1: ISO 8859. (line 32)
-* latin-greek, aliases and source: Tabular. (line 684)
-* Latin-greek-1, aliases and source: Tabular. (line 595)
-* latin-lap: Tabular. (line 697)
-* latin1: Tabular. (line 422)
-* latin1-2-5: Tabular. (line 519)
-* latin2: Tabular. (line 447)
-* latin3: Tabular. (line 452)
-* latin4: Tabular. (line 457)
-* latin5: Tabular. (line 482)
-* latin6: Tabular. (line 427)
-* latin7: Tabular. (line 432)
-* latin8: Tabular. (line 437)
-* latin9: Tabular. (line 442)
-* lin: African. (line 17)
-* lingala: African. (line 17)
-* ltex: LaTeX. (line 6)
-* mac: Tabular. (line 690)
-* mac <1>: Apple-Mac. (line 29)
-* mac-is, aliases and source: Tabular. (line 688)
-* macce: Tabular. (line 694)
-* macce <1>: Apple-Mac. (line 29)
-* macedonian: Tabular. (line 566)
-* macintosh, a charset, and its aliases: Apple-Mac. (line 29)
-* macintosh, aliases and source: Tabular. (line 690)
-* macintosh_ce, aliases and source: Tabular. (line 694)
-* macintosh_ce, and its aliases: Apple-Mac. (line 29)
-* mnemonic, an alias for RFC1345 charset: Tabular. (line 53)
-* ms-ansi: Tabular. (line 97)
-* ms-arab: Tabular. (line 113)
-* ms-cyrl: Tabular. (line 93)
-* ms-ee: Tabular. (line 89)
-* ms-greek: Tabular. (line 101)
-* ms-hebr: Tabular. (line 109)
-* ms-turk: Tabular. (line 105)
-* MSDOS: IBM-PC. (line 6)
-* MSZ_7795.3, aliases and source: Tabular. (line 599)
-* Mule, a charset: Mule. (line 6)
-* NATS-DANO, aliases and source: Tabular. (line 603)
-* NATS-DANO-ADD, aliases and source: Tabular. (line 607)
-* NATS-SEFI, aliases and source: Tabular. (line 611)
-* NATS-SEFI-ADD, aliases and source: Tabular. (line 615)
-* NC_NC00-10(81): Tabular. (line 619)
-* NC_NC00-10, aliases and source: Tabular. (line 619)
-* next: Tabular. (line 639)
-* NeXTSTEP, aliases and source: Tabular. (line 639)
-* NF_Z_62-010, aliases and source: Tabular. (line 623)
-* NF_Z_62-010_(1973), aliases and source: Tabular. (line 627)
-* no: Tabular. (line 631)
-* no2: Tabular. (line 635)
-* NOS: CDC-NOS. (line 6)
-* NS_4551-1, aliases and source: Tabular. (line 631)
-* NS_4551-2, aliases and source: Tabular. (line 635)
-* o1: Dump. (line 25)
-* o2: Dump. (line 31)
-* o4: Dump. (line 38)
-* Octal-1: Dump. (line 25)
-* Octal-2: Dump. (line 31)
-* Octal-4: Dump. (line 38)
-* os2latin1: Tabular. (line 231)
-* pc: IBM-PC. (line 6)
-* pcl2: Tabular. (line 322)
-* pclatin2: Tabular. (line 322)
-* PT, aliases and source: Tabular. (line 643)
-* PT2, aliases and source: Tabular. (line 647)
-* QNX, an alias for a charset: Icon-QNX. (line 6)
-* QP: MIME. (line 16)
-* quote-printable: MIME. (line 16)
-* Quoted-Printable: MIME. (line 16)
-* r8: Tabular. (line 679)
-* ref: Tabular. (line 507)
-* RFC1345, a charset, and its aliases: Tabular. (line 53)
-* RFC1866: HTML. (line 37)
-* RFC2070: HTML. (line 46)
-* roman8: Tabular. (line 679)
-* rune: UCS-2. (line 29)
-* sami, aliases and source: Tabular. (line 697)
-* sango: African. (line 17)
-* se: Tabular. (line 651)
-* se2: Tabular. (line 655)
-* SEN_850200_B, aliases and source: Tabular. (line 651)
-* SEN_850200_C, aliases and source: Tabular. (line 655)
-* serbian: Tabular. (line 570)
-* SS636127: Tabular. (line 651)
-* ST_SEV_358-88: Tabular. (line 218)
-* swabytes: Permutations. (line 15)
-* t-bambara: African. (line 10)
-* t-bra: African. (line 10)
-* t-ewondo: African. (line 10)
-* t-fra: African. (line 24)
-* t-francais: African. (line 24)
-* t-fulfude: African. (line 10)
-* t-lin: African. (line 17)
-* t-lingala: African. (line 17)
-* t-sango: African. (line 17)
-* t-wolof: African. (line 17)
-* T.101-G2, not recognised by recode: Tabular. (line 21)
-* T.61-7bit, aliases and source: Tabular. (line 659)
-* T.61-8bit, not recognised by recode: Tabular. (line 21)
-* T1: Others. (line 28)
-* TCVN, for Vienamese: Vietnamese. (line 11)
-* test15: Test. (line 35)
-* test16: Test. (line 42)
-* test7: Test. (line 25)
-* test8: Test. (line 30)
-* texi: Texinfo. (line 6)
-* Texinfo, a charset: Texinfo. (line 6)
-* Texte: Texte. (line 6)
-* TF-16: UTF-16. (line 23)
-* TF-7: UTF-7. (line 12)
-* TF-8: UTF-8. (line 82)
-* ti: Texinfo. (line 6)
-* tree, a special charset: Surfaces. (line 34)
-* txte: Texte. (line 6)
-* u2: UCS-2. (line 29)
-* u4: UCS-4. (line 10)
-* u6: UTF-16. (line 23)
-* u7: UTF-7. (line 12)
-* u8: UTF-8. (line 82)
-* UCS: Universal. (line 11)
-* UCS-2: UCS-2. (line 6)
-* UCS-4: UCS-4. (line 6)
-* uk: Tabular. (line 81)
-* Unicode, an alias for UTF-16: UTF-16. (line 23)
-* UNICODE-1-1-UTF-7, and aliases: UTF-7. (line 12)
-* us: Tabular. (line 72)
-* us <1>: ASCII. (line 6)
-* US-ASCII: Tabular. (line 72)
-* US-ASCII <1>: ASCII. (line 6)
-* us-dk, not recognised by recode: Tabular. (line 18)
-* UTF-1: Universal. (line 18)
-* UTF-16, and aliases: UTF-16. (line 6)
-* UTF-7: UTF-7. (line 6)
-* UTF-8: UTF-8. (line 6)
-* UTF-8, aliases: UTF-8. (line 82)
-* UTF-FSS: UTF-8. (line 82)
-* VIQR: Vietnamese. (line 23)
-* VISCII: Vietnamese. (line 16)
-* VN1, maybe not available: Vietnamese. (line 11)
-* VN2, maybe not available: Vietnamese. (line 11)
-* VN3, maybe not available: Vietnamese. (line 11)
-* VNI: Vietnamese. (line 27)
-* VPS: Vietnamese. (line 20)
-* WinBaltRim: Tabular. (line 117)
-* windows-1250: Tabular. (line 89)
-* windows-1251: Tabular. (line 93)
-* windows-1252: Tabular. (line 97)
-* windows-1253: Tabular. (line 101)
-* windows-1254: Tabular. (line 105)
-* windows-1255: Tabular. (line 109)
-* windows-1256: Tabular. (line 113)
-* windows-1257: Tabular. (line 117)
-* wolof: African. (line 17)
-* X0201: Tabular. (line 559)
-* x0201-7: Tabular. (line 527)
-* x1: Dump. (line 66)
-* x2: Dump. (line 73)
-* x4: Dump. (line 80)
-* XML-standalone: HTML. (line 27)
-* yu: Tabular. (line 562)
-
-
-\1f
-Tag Table:
-Node: Top\7f1125
-Node: Tutorial\7f5584
-Node: Introduction\7f10019
-Node: Charset overview\7f14252
-Node: Surface overview\7f16059
-Node: Contributing\7f17527
-Ref: Contributing-Footnote-1\7f19761
-Node: Invoking recode\7f19895
-Node: Synopsis\7f20849
-Ref: Synopsis-Footnote-1\7f24032
-Node: Requests\7f24329
-Ref: Requests-Footnote-1\7f30364
-Ref: Requests-Footnote-2\7f30431
-Ref: Requests-Footnote-3\7f30609
-Node: Listings\7f31068
-Ref: Listings-Footnote-1\7f42351
-Node: Recoding\7f42674
-Node: Reversibility\7f45495
-Ref: Reversibility-Footnote-1\7f53939
-Node: Sequencing\7f54076
-Node: Mixed\7f56514
-Node: Emacs\7f59882
-Node: Debugging\7f60916
-Node: Library\7f65186
-Node: Outer level\7f68147
-Node: Request level\7f73492
-Node: Task level\7f84472
-Node: Charset level\7f95120
-Node: Errors\7f95962
-Ref: Errors-Footnote-1\7f100815
-Ref: Errors-Footnote-2\7f100929
-Node: Universal\7f101290
-Ref: Universal-Footnote-1\7f104402
-Ref: Universal-Footnote-2\7f104468
-Node: UCS-2\7f104681
-Node: UCS-4\7f107206
-Node: UTF-7\7f107746
-Node: UTF-8\7f108341
-Node: UTF-16\7f112643
-Node: count-characters\7f113791
-Node: dump-with-names\7f114462
-Node: iconv\7f117011
-Node: Tabular\7f120441
-Node: ASCII misc\7f142661
-Node: ASCII\7f143029
-Node: ISO 8859\7f143845
-Node: ASCII-BS\7f146132
-Node: flat\7f147970
-Node: IBM and MS\7f148641
-Node: EBCDIC\7f149185
-Node: IBM-PC\7f151281
-Ref: IBM-PC-Footnote-1\7f153397
-Node: Icon-QNX\7f153556
-Node: CDC\7f153980
-Node: Display Code\7f155659
-Ref: Display Code-Footnote-1\7f157939
-Node: CDC-NOS\7f158144
-Node: Bang-Bang\7f160105
-Node: Micros\7f162034
-Node: Apple-Mac\7f162417
-Node: AtariST\7f164452
-Node: Miscellaneous\7f165438
-Node: HTML\7f166357
-Node: LaTeX\7f172340
-Node: Texinfo\7f173114
-Node: Vietnamese\7f173886
-Node: African\7f174862
-Node: Others\7f176212
-Node: Java\7f177665
-Node: Texte\7f178332
-Ref: Texte-Footnote-1\7f182877
-Ref: Texte-Footnote-2\7f182957
-Ref: Texte-Footnote-3\7f183432
-Node: Mule\7f183529
-Ref: Mule-Footnote-1\7f185310
-Node: Surfaces\7f185827
-Ref: Surfaces-Footnote-1\7f189248
-Node: Permutations\7f189352
-Node: End lines\7f190193
-Node: MIME\7f192394
-Node: Dump\7f193581
-Node: Test\7f197745
-Node: Internals\7f200223
-Node: Main flow\7f201451
-Node: New charsets\7f204553
-Node: New surfaces\7f209090
-Node: Design\7f209816
-Ref: Design-Footnote-1\7f218972
-Node: Concept Index\7f219076
-Node: Option Index\7f234695
-Node: Library Index\7f237548
-Node: Charset and Surface Index\7f242123
-\1f
-End Tag Table
+++ /dev/null
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" "" $nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
- or: $0 [OPTION]... SRCFILES... DIRECTORY
- or: $0 [OPTION]... -t DIRECTORY SRCFILES...
- or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c (ignored)
--d create directories instead of installing files.
--g GROUP $chgrpprog installed files to GROUP.
--m MODE $chmodprog installed files to MODE.
--o USER $chownprog installed files to USER.
--s $stripprog installed files.
--t DIRECTORY install into DIRECTORY.
--T report an error if DSTFILE is a directory.
---help display this help and exit.
---version display version info and exit.
-
-Environment variables override the default commands:
- CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
- case $1 in
- -c) shift
- continue;;
-
- -d) dir_arg=true
- shift
- continue;;
-
- -g) chgrpcmd="$chgrpprog $2"
- shift
- shift
- continue;;
-
- --help) echo "$usage"; exit $?;;
-
- -m) mode=$2
- shift
- shift
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- continue;;
-
- -o) chowncmd="$chownprog $2"
- shift
- shift
- continue;;
-
- -s) stripcmd=$stripprog
- shift
- continue;;
-
- -t) dstarg=$2
- shift
- shift
- continue;;
-
- -T) no_target_directory=true
- shift
- continue;;
-
- --version) echo "$0 $scriptversion"; exit $?;;
-
- --) shift
- break;;
-
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
-
- *) break;;
- esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
- # When -d is used, all remaining arguments are directories to create.
- # When -t is used, the destination is already specified.
- # Otherwise, the last argument is the destination. Remove it from $@.
- for arg
- do
- if test -n "$dstarg"; then
- # $@ is not empty: it contains at least $arg.
- set fnord "$@" "$dstarg"
- shift # fnord
- fi
- shift # arg
- dstarg=$arg
- done
-fi
-
-if test $# -eq 0; then
- if test -z "$dir_arg"; then
- echo "$0: no input file specified." >&2
- exit 1
- fi
- # It's OK to call `install-sh -d' without argument.
- # This can happen when creating conditional directories.
- exit 0
-fi
-
-if test -z "$dir_arg"; then
- trap '(exit $?); exit' 1 2 13 15
-
- # Set umask so as not to create temps with too-generous modes.
- # However, 'strip' requires both read and write access to temps.
- case $mode in
- # Optimize common cases.
- *644) cp_umask=133;;
- *755) cp_umask=22;;
-
- *[0-7])
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw='% 200'
- fi
- cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
- *)
- if test -z "$stripcmd"; then
- u_plus_rw=
- else
- u_plus_rw=,u+rw
- fi
- cp_umask=$mode$u_plus_rw;;
- esac
-fi
-
-for src
-do
- # Protect names starting with `-'.
- case $src in
- -*) src=./$src ;;
- esac
-
- if test -n "$dir_arg"; then
- dst=$src
- dstdir=$dst
- test -d "$dstdir"
- dstdir_status=$?
- else
-
- # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
- # might cause directories to be created, which would be especially bad
- # if $src (and thus $dsttmp) contains '*'.
- if test ! -f "$src" && test ! -d "$src"; then
- echo "$0: $src does not exist." >&2
- exit 1
- fi
-
- if test -z "$dstarg"; then
- echo "$0: no destination specified." >&2
- exit 1
- fi
-
- dst=$dstarg
- # Protect names starting with `-'.
- case $dst in
- -*) dst=./$dst ;;
- esac
-
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
- if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dstarg: Is a directory" >&2
- exit 1
- fi
- dstdir=$dst
- dst=$dstdir/`basename "$src"`
- dstdir_status=0
- else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
- test -d "$dstdir"
- dstdir_status=$?
- fi
- fi
-
- obsolete_mkdir_used=false
-
- if test $dstdir_status != 0; then
- case $posix_mkdir in
- '')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
-
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
-
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writeable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
- esac
-
- if
- $posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
- )
- then :
- else
-
- # The umask is ridiculous, or mkdir does not conform to POSIX,
- # or it failed possibly due to a race condition. Create the
- # directory the slow way, step by step, checking for races as we go.
-
- case $dstdir in
- /*) prefix=/ ;;
- -*) prefix=./ ;;
- *) prefix= ;;
- esac
-
- case $posix_glob in
- '')
- if (set -f) 2>/dev/null; then
- posix_glob=true
- else
- posix_glob=false
- fi ;;
- esac
-
- oIFS=$IFS
- IFS=/
- $posix_glob && set -f
- set fnord $dstdir
- shift
- $posix_glob && set +f
- IFS=$oIFS
-
- prefixes=
-
- for d
- do
- test -z "$d" && continue
-
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
- done
-
- if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
- fi
- fi
- fi
-
- if test -n "$dir_arg"; then
- { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
- { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
- { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
- test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
- else
-
- # Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
-
- # Trap to clean up those temp files at exit.
- trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
- # Copy the file name to the temp name.
- (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
- # and set any options; do chmod last to preserve setuid bits.
- #
- # If any of these fail, we abort the whole thing. If we want to
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $cpprog $src $dsttmp" command.
- #
- { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
- && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
- && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
- && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
- # Now rename the file to the real destination.
- { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
- || {
- # The rename failed, perhaps because mv can't rename something else
- # to itself, or perhaps because mv is so ancient that it does not
- # support -f.
-
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- if test -f "$dst"; then
- $doit $rmcmd -f "$dst" 2>/dev/null \
- || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
- && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
- || {
- echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- else
- :
- fi
- } &&
-
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
- }
- } || exit 1
-
- trap '' 0
- fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.13.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile for Recode (own internal) library.
-# Copyright © 1995, 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
-# François Pinard <pinard@iro.umontreal.ca>
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = lib
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/mkinstalldirs alloca.c realloc.c strtoul.c \
- malloc.c strtol.c $(top_srcdir)/depcomp $(noinst_HEADERS) \
- ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/malloc.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/realloc.m4 \
- $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-LIBRARIES = $(noinst_LIBRARIES)
-ARFLAGS = cru
-AM_V_AR = $(am__v_AR_@AM_V@)
-am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
-am__v_AR_0 = @echo " AR " $@;
-am__v_AR_1 =
-libreco_a_AR = $(AR) $(ARFLAGS)
-libreco_a_DEPENDENCIES = @ALLOCA@ @LIBOBJS@
-am_libreco_a_OBJECTS = error.$(OBJEXT) getopt.$(OBJEXT) \
- getopt1.$(OBJEXT) xstrdup.$(OBJEXT)
-libreco_a_OBJECTS = $(am_libreco_a_OBJECTS)
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 =
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo " CC " $@;
-am__v_CC_1 =
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo " CCLD " $@;
-am__v_CCLD_1 =
-SOURCES = $(libreco_a_SOURCES)
-DIST_SOURCES = $(libreco_a_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-HEADERS = $(noinst_HEADERS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = gnits
-noinst_LIBRARIES = libreco.a
-noinst_HEADERS = error.h getopt.h gettext.h pathmax.h xstring.h
-libreco_a_SOURCES = error.c getopt.c getopt1.c xstrdup.c
-EXTRA_DIST = alloca.c malloc.c realloc.c strtol.c strtoul.c
-AM_CPPFLAGS = -I.. -I$(srcdir)
-libreco_a_LIBADD = @ALLOCA@ @LIBOBJS@
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits lib/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits lib/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-clean-noinstLIBRARIES:
- -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
-
-libreco.a: $(libreco_a_OBJECTS) $(libreco_a_DEPENDENCIES) $(EXTRA_libreco_a_DEPENDENCIES)
- $(AM_V_at)-rm -f libreco.a
- $(AM_V_AR)$(libreco_a_AR) libreco.a $(libreco_a_OBJECTS) $(libreco_a_LIBADD)
- $(AM_V_at)$(RANLIB) libreco.a
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/alloca.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/malloc.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/realloc.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtol.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/strtoul.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xstrdup.Po@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LIBRARIES) $(HEADERS)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstLIBRARIES \
- mostlyclean-am
-
-distclean: distclean-am
- -rm -rf $(DEPDIR) ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -rf $(DEPDIR) ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstLIBRARIES cscopelist-am ctags \
- ctags-am distclean distclean-compile distclean-generic \
- distclean-libtool distclean-tags distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags tags-am uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-
-# libtool (GNU libtool) 2.4.2
-# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
-# This is free software; see the source for copying conditions. There is NO
-# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-# GNU Libtool is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1.3ubuntu1
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
-
-PROGRAM=libtool
-PACKAGE=libtool
-VERSION="2.4.2 Debian-2.4.2-1.3ubuntu1"
-TIMESTAMP=""
-package_revision=1.3337
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
- fi"
-done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-
-$lt_unset CDPATH
-
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-
-
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
-
-exit_status=$EXIT_SUCCESS
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
-
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-# dirname: Compute the dirname of FILE. If nonempty,
-# add APPEND to the result, otherwise set result
-# to NONDIR_REPLACEMENT.
-# value returned in "$func_dirname_result"
-# basename: Compute filename of FILE.
-# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-# value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
- "")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
- ;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
- ;;
- *)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
- ;;
- esac
- done
-
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
-
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
-}
-
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-
-# Make sure we have an absolute path for reexecution:
-case $progpath in
- [\\/]*|[A-Za-z]:\\*) ;;
- *[\\/]*)
- progdir=$func_dirname_result
- progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
- ;;
- *)
- save_IFS="$IFS"
- IFS=${PATH_SEPARATOR-:}
- for progdir in $PATH; do
- IFS="$save_IFS"
- test -x "$progdir/$progname" && break
- done
- IFS="$save_IFS"
- test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
-
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
-
- # A bug in bash halts the script if the last line of a function
- # fails when set -e is in force, so we need another command to
- # work around that:
- :
-}
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
-{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
-
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
-
- # bash bug again:
- :
-}
-
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
-
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information." ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
- $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
- my_directory_path="$1"
- my_dir_list=
-
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
- esac
-
- # While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
- # ...make a list in topmost first order. Use a colon delimited
- # list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
-
- # If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
-
- # ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
- done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
- # try to create one of the directories concurrently. Don't
- # stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
- done
- IFS="$save_mkdir_p_IFS"
-
- # Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
- fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$opt_dry_run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
- fi
-
- $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
-func_quote_for_eval ()
-{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
-
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
-}
-
-
-# func_quote_for_expand arg
-# Aesthetically quote ARG to be evaled later; same as above,
-# but do not quote variable references.
-func_quote_for_expand ()
-{
- case $1 in
- *[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
- *)
- my_arg="$1" ;;
- esac
-
- case $my_arg in
- # Double-quote args containing shell metacharacters to delay
- # word splitting and command substitution for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
- ;;
- esac
-
- func_quote_for_expand_result="$my_arg"
-}
-
-
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it.
-func_show_eval ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
-
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
-
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
-
-
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
-# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
-# is given, then evaluate it. Use the saved locale for evaluation.
-func_show_eval_locale ()
-{
- my_cmd="$1"
- my_fail_exp="${2-:}"
-
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
-
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
- fi
- fi
-}
-
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result. All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
-}
-
-
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
-{
- $opt_debug
-
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
-}
-
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
-{
- $opt_debug
-
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
-}
-
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
-func_help ()
-{
- $opt_debug
-
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
-}
-
-# func_missing_arg argname
-# Echo program name prefixed message to standard error and set global
-# exit_cmd.
-func_missing_arg ()
-{
- $opt_debug
-
- func_error "missing argument for $1."
- exit_cmd=exit
-}
-
-
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
-
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
-
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-
-exit_cmd=:
-
-
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
-# func_fatal_configuration arg...
-# Echo program name prefixed message to standard error, followed by
-# a configuration failure hint, and exit.
-func_fatal_configuration ()
-{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
-}
-
-
-# func_config
-# Display the configuration for all the tags in this script.
-func_config ()
-{
- re_begincf='^# ### BEGIN LIBTOOL'
- re_endcf='^# ### END LIBTOOL'
-
- # Default configuration.
- $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
-
- # Now print the configurations for the tags.
- for tagname in $taglist; do
- $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
- done
-
- exit $?
-}
-
-# func_features
-# Display the features supported by this script.
-func_features ()
-{
- echo "host: $host"
- if test "$build_libtool_libs" = yes; then
- echo "enable shared libraries"
- else
- echo "disable shared libraries"
- fi
- if test "$build_old_libs" = yes; then
- echo "enable static libraries"
- else
- echo "disable static libraries"
- fi
-
- exit $?
-}
-
-# func_enable_tag tagname
-# Verify that TAGNAME is valid, and either flag an error and exit, or
-# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
-# variable here.
-func_enable_tag ()
-{
- # Global variable:
- tagname="$1"
-
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
-
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
-
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
- *)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
-
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
-}
-
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
-{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
- fi
-
- exit $EXIT_MISMATCH
- fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
-
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
-
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
- esac
- done
-
- # Validate options:
-
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
-
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
-
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
-
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
-
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
-
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
-
-
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
-}
-
-
-
-
-## ----------- ##
-## Main. ##
-## ----------- ##
-
-# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_lalib_p ()
-{
- test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
-}
-
-# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
-# This function implements the same check as func_lalib_p without
-# resorting to external programs. To this end, it redirects stdin and
-# closes it afterwards, without saving the original file descriptor.
-# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
-func_lalib_unsafe_p ()
-{
- lalib_p=no
- if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
- for lalib_p_l in 1 2 3 4
- do
- read lalib_p_line
- case "$lalib_p_line" in
- \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
- esac
- done
- exec 0<&5 5<&-
- fi
- test "$lalib_p" = yes
-}
-
-# func_ltwrapper_script_p file
-# True iff FILE is a libtool wrapper script
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_script_p ()
-{
- func_lalib_p "$1"
-}
-
-# func_ltwrapper_executable_p file
-# True iff FILE is a libtool wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_executable_p ()
-{
- func_ltwrapper_exec_suffix=
- case $1 in
- *.exe) ;;
- *) func_ltwrapper_exec_suffix=.exe ;;
- esac
- $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
-}
-
-# func_ltwrapper_scriptname file
-# Assumes file is an ltwrapper_executable
-# uses $file to determine the appropriate filename for a
-# temporary ltwrapper_script.
-func_ltwrapper_scriptname ()
-{
- func_dirname_and_basename "$1" "" "."
- func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
-}
-
-# func_ltwrapper_p file
-# True iff FILE is a libtool wrapper script or wrapper executable
-# This function is only a basic sanity check; it will hardly flush out
-# determined imposters.
-func_ltwrapper_p ()
-{
- func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
-}
-
-
-# func_execute_cmds commands fail_cmd
-# Execute tilde-delimited COMMANDS.
-# If FAIL_CMD is given, eval that upon failure.
-# FAIL_CMD may read-access the current command in variable CMD!
-func_execute_cmds ()
-{
- $opt_debug
- save_ifs=$IFS; IFS='~'
- for cmd in $1; do
- IFS=$save_ifs
- eval cmd=\"$cmd\"
- func_show_eval "$cmd" "${2-:}"
- done
- IFS=$save_ifs
-}
-
-
-# func_source file
-# Source FILE, adding directory component if necessary.
-# Note that it is not necessary on cygwin/mingw to append a dot to
-# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
-# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
-func_source ()
-{
- $opt_debug
- case $1 in
- */* | *\\*) . "$1" ;;
- *) . "./$1" ;;
- esac
-}
-
-
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot. Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
- func_resolve_sysroot_result=$1
- case $func_resolve_sysroot_result in
- =*)
- func_stripname '=' '' "$func_resolve_sysroot_result"
- func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
- ;;
- esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
- case "$lt_sysroot:$1" in
- ?*:"$lt_sysroot"*)
- func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
- ;;
- *)
- # Including no sysroot.
- func_replace_sysroot_result=$1
- ;;
- esac
-}
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
- $opt_debug
- if test -n "$available_tags" && test -z "$tagname"; then
- CC_quoted=
- for arg in $CC; do
- func_append_quoted CC_quoted "$arg"
- done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
- case $@ in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
- " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
- CC_quoted=
- for arg in $CC; do
- # Double-quote args containing other shell metacharacters.
- func_append_quoted CC_quoted "$arg"
- done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
- case "$@ " in
- " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
- " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
-# else
-# func_verbose "using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-}
-
-
-
-# func_write_libtool_object output_name pic_name nonpic_name
-# Create a libtool object file (analogous to a ".la" file),
-# but don't create it if we're doing a dry run.
-func_write_libtool_object ()
-{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
- else
- write_lobj=none
- fi
-
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
- else
- write_oldobj=none
- fi
-
- $opt_dry_run || {
- cat >${write_libobj}T <<EOF
-# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-pic_object=$write_lobj
-
-# Name of the non-PIC object
-non_pic_object=$write_oldobj
-
-EOF
- $MV "${write_libobj}T" "${write_libobj}"
- }
-}
-
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
- if test -n "$1"; then
- # Unfortunately, winepath does not exit with a non-zero error code, so we
- # are forced to check the contents of stdout. On the other hand, if the
- # command is not found, the shell will set an exit code of 127 and print
- # *an error message* to stdout. So we must check for both error code of
- # zero AND non-empty stdout, which explains the odd construction:
- func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
- func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
- else
- func_convert_core_file_wine_to_w32_result=
- fi
- fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
- $opt_debug
- # unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
- if test -n "$1"; then
- oldIFS=$IFS
- IFS=:
- for func_convert_core_path_wine_to_w32_f in $1; do
- IFS=$oldIFS
- func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
- if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
- else
- func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
- fi
- fi
- done
- IFS=$oldIFS
- fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
- $opt_debug
- if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
- func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
- if test "$?" -ne 0; then
- # on failure, ensure result is empty
- func_cygpath_result=
- fi
- else
- func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
- fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format. Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
- $opt_debug
- # awkward: cmd appends spaces to result
- func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
- func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback:
- func_to_host_file_result="$1"
- fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
- $opt_debug
- if test -z "$4" && test -n "$3"; then
- func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback. This is a deliberately simplistic "conversion" and
- # should not be "improved". See libtool.info.
- if test "x$1" != "x$2"; then
- lt_replace_pathsep_chars="s|$1|$2|g"
- func_to_host_path_result=`echo "$3" |
- $SED -e "$lt_replace_pathsep_chars"`
- else
- func_to_host_path_result="$3"
- fi
- fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
- $opt_debug
- case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
- ;;
- esac
- case $4 in
- $2 ) func_append func_to_host_path_result "$3"
- ;;
- esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
- $opt_debug
- $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result. If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
- $opt_debug
- case ,$2, in
- *,"$to_tool_file_cmd",*)
- func_to_tool_file_result=$1
- ;;
- *)
- $to_tool_file_cmd "$1"
- func_to_tool_file_result=$func_to_host_file_result
- ;;
- esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
- func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper. Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format. Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
- # LT_CYGPATH in this case.
- func_to_host_file_result=`cygpath -m "$1"`
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format. Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_msys_to_w32 "$1"
- func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
- func_convert_core_file_wine_to_w32 "$1"
- func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format. If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-# file name conversion function : func_convert_file_X_to_Y ()
-# path conversion function : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same. If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
- $opt_debug
- if test -z "$to_host_path_cmd"; then
- func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
- fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
- $opt_debug
- func_init_to_host_path_cmd
- $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
- func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper. Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # Remove leading and trailing path separator characters from ARG. MSYS
- # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
- # and winepath ignores them completely.
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format. Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format. Requires a wine environment and
-# a working winepath. Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
- func_convert_path_check : : \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" : "$1"
- fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # Remove leading and trailing path separator characters from
- # ARG. msys behavior is inconsistent here, cygpath turns them
- # into '.;' and ';.', and winepath ignores them completely.
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
- func_convert_path_check : : \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" : "$1"
- fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
-# func_mode_compile arg...
-func_mode_compile ()
-{
- $opt_debug
- # Get the compilation command and the source file.
- base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
- suppress_opt=yes
- suppress_output=
- arg_mode=normal
- libobj=
- later=
- pie_flag=
-
- for arg
- do
- case $arg_mode in
- arg )
- # do not "continue". Instead, add this to base_compile
- lastarg="$arg"
- arg_mode=normal
- ;;
-
- target )
- libobj="$arg"
- arg_mode=normal
- continue
- ;;
-
- normal )
- # Accept any command-line options.
- case $arg in
- -o)
- test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
- arg_mode=target
- continue
- ;;
-
- -pie | -fpie | -fPIE)
- func_append pie_flag " $arg"
- continue
- ;;
-
- -shared | -static | -prefer-pic | -prefer-non-pic)
- func_append later " $arg"
- continue
- ;;
-
- -no-suppress)
- suppress_opt=no
- continue
- ;;
-
- -Xcompiler)
- arg_mode=arg # the next one goes into the "base_compile" arg list
- continue # The current "srcfile" will either be retained or
- ;; # replaced later. I would guess that would be a bug.
-
- -Wc,*)
- func_stripname '-Wc,' '' "$arg"
- args=$func_stripname_result
- lastarg=
- save_ifs="$IFS"; IFS=','
- for arg in $args; do
- IFS="$save_ifs"
- func_append_quoted lastarg "$arg"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$lastarg"
- lastarg=$func_stripname_result
-
- # Add the arguments to base_compile.
- func_append base_compile " $lastarg"
- continue
- ;;
-
- *)
- # Accept the current argument as the source file.
- # The previous "srcfile" becomes the current argument.
- #
- lastarg="$srcfile"
- srcfile="$arg"
- ;;
- esac # case $arg
- ;;
- esac # case $arg_mode
-
- # Aesthetically quote the previous argument.
- func_append_quoted base_compile "$lastarg"
- done # for arg
-
- case $arg_mode in
- arg)
- func_fatal_error "you must specify an argument for -Xcompile"
- ;;
- target)
- func_fatal_error "you must specify a target with \`-o'"
- ;;
- *)
- # Get the name of the library object.
- test -z "$libobj" && {
- func_basename "$srcfile"
- libobj="$func_basename_result"
- }
- ;;
- esac
-
- # Recognize several different file suffixes.
- # If the user specifies -o file.o, it is replaced with file.lo
- case $libobj in
- *.[cCFSifmso] | \
- *.ada | *.adb | *.ads | *.asm | \
- *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
- *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
- func_xform "$libobj"
- libobj=$func_xform_result
- ;;
- esac
-
- case $libobj in
- *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
- *)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
- ;;
- esac
-
- func_infer_tag $base_compile
-
- for arg in $later; do
- case $arg in
- -shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
- build_old_libs=no
- continue
- ;;
-
- -static)
- build_libtool_libs=no
- build_old_libs=yes
- continue
- ;;
-
- -prefer-pic)
- pic_mode=yes
- continue
- ;;
-
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
- esac
- done
-
- func_quote_for_eval "$libobj"
- test "X$libobj" != "X$func_quote_for_eval_result" \
- && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
- func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
-
- test -z "$base_compile" && \
- func_fatal_help "you must specify a compilation command"
-
- # Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
- removelist="$obj $lobj $libobj ${libobj}T"
- else
- removelist="$lobj $libobj ${libobj}T"
- fi
-
- # On Cygwin there's no "real" PIC flag so we must build both object types
- case $host_os in
- cygwin* | mingw* | pw32* | os2* | cegcc*)
- pic_mode=default
- ;;
- esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
- # non-PIC code in shared libraries is not supported
- pic_mode=default
- fi
-
- # Calculate the filename of the output object if compiler does
- # not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
- else
- output_obj=
- need_locks=no
- lockfile=
- fi
-
- # Lock this critical section if it is needed
- # We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
- until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
- func_echo "Waiting for $lockfile to be removed"
- sleep 2
- done
- elif test "$need_locks" = warn; then
- if test -f "$lockfile"; then
- $ECHO "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $opt_dry_run || $RM $removelist
- exit $EXIT_FAILURE
- fi
- func_append removelist " $output_obj"
- $ECHO "$srcfile" > "$lockfile"
- fi
-
- $opt_dry_run || $RM $removelist
- func_append removelist " $lockfile"
- trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
-
- func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
- srcfile=$func_to_tool_file_result
- func_quote_for_eval "$srcfile"
- qsrcfile=$func_quote_for_eval_result
-
- # Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
- # Without this assignment, base_compile gets emptied.
- fbsd_hideous_sh_bug=$base_compile
-
- if test "$pic_mode" != no; then
- command="$base_compile $qsrcfile $pic_flag"
- else
- # Don't build PIC code
- command="$base_compile $qsrcfile"
- fi
-
- func_mkdir_p "$xdir$objdir"
-
- if test -z "$output_obj"; then
- # Place PIC objects in $objdir
- func_append command " -o $lobj"
- fi
-
- func_show_eval_locale "$command" \
- 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $opt_dry_run || $RM $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed, then go on to compile the next one
- if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
- func_show_eval '$MV "$output_obj" "$lobj"' \
- 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
- fi
-
- # Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
- suppress_output=' >/dev/null 2>&1'
- fi
- fi
-
- # Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
- # Don't build PIC code
- command="$base_compile $qsrcfile$pie_flag"
- else
- command="$base_compile $qsrcfile $pic_flag"
- fi
- if test "$compiler_c_o" = yes; then
- func_append command " -o $obj"
- fi
-
- # Suppress compiler output if we already did a PIC compilation.
- func_append command "$suppress_output"
- func_show_eval_locale "$command" \
- '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
-
- if test "$need_locks" = warn &&
- test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
- $ECHO "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
- $opt_dry_run || $RM $removelist
- exit $EXIT_FAILURE
- fi
-
- # Just move the object if needed
- if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
- func_show_eval '$MV "$output_obj" "$obj"' \
- 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
- fi
- fi
-
- $opt_dry_run || {
- func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
-
- # Unlock the critical section if it was locked
- if test "$need_locks" != no; then
- removelist=$lockfile
- $RM "$lockfile"
- fi
- }
-
- exit $EXIT_SUCCESS
-}
-
-$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
-}
-
-func_mode_help ()
-{
- # We need to display help for each of the modes.
- case $opt_mode in
- "")
- # Generic help is extracted from the usage comments
- # at the start of this file.
- func_help
- ;;
-
- clean)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
- ;;
-
- compile)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
- -o OUTPUT-FILE set the output file name to OUTPUT-FILE
- -no-suppress do not suppress compiler output for multiple passes
- -prefer-pic try to build PIC objects only
- -prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
- -Wc,FLAG pass FLAG directly to the compiler
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
- ;;
-
- execute)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
- -dlopen FILE add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
- ;;
-
- finish)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
- ;;
-
- install)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
-
-The following components of INSTALL-COMMAND are treated specially:
-
- -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
- ;;
-
- link)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
- -all-static do not do any dynamic linking at all
- -avoid-version do not add a version suffix if possible
- -bindir BINDIR specify path to binaries directory (for systems where
- libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
- -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
- -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
- -export-symbols SYMFILE
- try to export only the symbols listed in SYMFILE
- -export-symbols-regex REGEX
- try to export only the symbols matching REGEX
- -LLIBDIR search LIBDIR for required installed libraries
- -lNAME OUTPUT-FILE requires the installed library libNAME
- -module build a library that can dlopened
- -no-fast-install disable the fast-install mode
- -no-install link a not-installable executable
- -no-undefined declare that a library does not refer to external symbols
- -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
- -precious-files-regex REGEX
- don't remove output files matching REGEX
- -release RELEASE specify package release information
- -rpath LIBDIR the created library will eventually be installed in LIBDIR
- -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
- -shared only do dynamic linking of libtool libraries
- -shrext SUFFIX override the standard shared library file extension
- -static do not do any dynamic linking of uninstalled libtool libraries
- -static-libtool-libs
- do not do any dynamic linking of libtool libraries
- -version-info CURRENT[:REVISION[:AGE]]
- specify library version info [each variable defaults to 0]
- -weak LIBNAME declare that the target provides the LIBNAME interface
- -Wc,FLAG
- -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
- -Wl,FLAG
- -Xlinker FLAG pass linker-specific FLAG directly to the linker
- -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename. Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
- ;;
-
- uninstall)
- $ECHO \
-"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
- ;;
-
- *)
- func_fatal_help "invalid operation mode \`$opt_mode'"
- ;;
- esac
-
- echo
- $ECHO "Try \`$progname --help' for more information about other modes."
-}
-
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
- if test "$opt_help" = :; then
- func_mode_help
- else
- {
- func_help noexit
- for opt_mode in compile link execute install finish uninstall clean; do
- func_mode_help
- done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
- {
- func_help noexit
- for opt_mode in compile link execute install finish uninstall clean; do
- echo
- func_mode_help
- done
- } |
- sed '1d
- /^When reporting/,/^Report/{
- H
- d
- }
- $x
- /information about other modes/d
- /more detailed .*MODE/d
- s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
- fi
- exit $?
-fi
-
-
-# func_mode_execute arg...
-func_mode_execute ()
-{
- $opt_debug
- # The first argument is the command name.
- cmd="$nonopt"
- test -z "$cmd" && \
- func_fatal_help "you must specify a COMMAND"
-
- # Handle -dlopen flags immediately.
- for file in $opt_dlopen; do
- test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
-
- dir=
- case $file in
- *.la)
- func_resolve_sysroot "$file"
- file=$func_resolve_sysroot_result
-
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
-
- # Read the libtool library.
- dlname=
- library_names=
- func_source "$file"
-
- # Skip this library if it cannot be dlopened.
- if test -z "$dlname"; then
- # Warn if it was a shared library.
- test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
- continue
- fi
-
- func_dirname "$file" "" "."
- dir="$func_dirname_result"
-
- if test -f "$dir/$objdir/$dlname"; then
- func_append dir "/$objdir"
- else
- if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
- fi
- fi
- ;;
-
- *.lo)
- # Just add the directory containing the .lo file.
- func_dirname "$file" "" "."
- dir="$func_dirname_result"
- ;;
-
- *)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
- continue
- ;;
- esac
-
- # Get the absolute pathname.
- absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
-
- # Now add the directory to shlibpath_var.
- if eval "test -z \"\$$shlibpath_var\""; then
- eval "$shlibpath_var=\"\$dir\""
- else
- eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
- fi
- done
-
- # This variable tells wrapper scripts just to set shlibpath_var
- # rather than running their programs.
- libtool_execute_magic="$magic"
-
- # Check if any of the arguments is a wrapper script.
- args=
- for file
- do
- case $file in
- -* | *.la | *.lo ) ;;
- *)
- # Do a test to see if this is really a libtool program.
- if func_ltwrapper_script_p "$file"; then
- func_source "$file"
- # Transform arg to wrapped name.
- file="$progdir/$program"
- elif func_ltwrapper_executable_p "$file"; then
- func_ltwrapper_scriptname "$file"
- func_source "$func_ltwrapper_scriptname_result"
- # Transform arg to wrapped name.
- file="$progdir/$program"
- fi
- ;;
- esac
- # Quote arguments (to preserve shell metacharacters).
- func_append_quoted args "$file"
- done
-
- if test "X$opt_dry_run" = Xfalse; then
- if test -n "$shlibpath_var"; then
- # Export the shlibpath_var.
- eval "export $shlibpath_var"
- fi
-
- # Restore saved environment variables
- for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
- do
- eval "if test \"\${save_$lt_var+set}\" = set; then
- $lt_var=\$save_$lt_var; export $lt_var
- else
- $lt_unset $lt_var
- fi"
- done
-
- # Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
- fi
-}
-
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
-
-
-# func_mode_finish arg...
-func_mode_finish ()
-{
- $opt_debug
- libs=
- libdirs=
- admincmds=
-
- for opt in "$nonopt" ${1+"$@"}
- do
- if test -d "$opt"; then
- func_append libdirs " $opt"
-
- elif test -f "$opt"; then
- if func_lalib_unsafe_p "$opt"; then
- func_append libs " $opt"
- else
- func_warning "\`$opt' is not a valid libtool archive"
- fi
-
- else
- func_fatal_error "invalid argument \`$opt'"
- fi
- done
-
- if test -n "$libs"; then
- if test -n "$lt_sysroot"; then
- sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
- sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
- else
- sysroot_cmd=
- fi
-
- # Remove sysroot references
- if $opt_dry_run; then
- for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
- done
- else
- tmpdir=`func_mktempdir`
- for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
- > $tmpdir/tmp-la
- mv -f $tmpdir/tmp-la $lib
- done
- ${RM}r "$tmpdir"
- fi
- fi
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- for libdir in $libdirs; do
- if test -n "$finish_cmds"; then
- # Do each command in the finish commands.
- func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
-'"$cmd"'"'
- fi
- if test -n "$finish_eval"; then
- # Do the single finish_eval.
- eval cmds=\"$finish_eval\"
- $opt_dry_run || eval "$cmds" || func_append admincmds "
- $cmds"
- fi
- done
- fi
-
- # Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
-
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- echo "----------------------------------------------------------------------"
- echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $ECHO " $libdir"
- done
- echo
- echo "If you ever happen to want to link against installed libraries"
- echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- echo " during execution"
- fi
- if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
- echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $ECHO " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $ECHO " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- echo
-
- echo "See any operating system documentation about shared libraries for"
- case $host in
- solaris2.[6789]|solaris2.1[0-9])
- echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
- echo "pages."
- ;;
- *)
- echo "more information, such as the ld(1) and ld.so(8) manual pages."
- ;;
- esac
- echo "----------------------------------------------------------------------"
- fi
- exit $EXIT_SUCCESS
-}
-
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
-
-
-# func_mode_install arg...
-func_mode_install ()
-{
- $opt_debug
- # There may be an optional sh(1) argument at the beginning of
- # install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
- # Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
- # Aesthetically quote it.
- func_quote_for_eval "$nonopt"
- install_prog="$func_quote_for_eval_result "
- arg=$1
- shift
- else
- install_prog=
- arg=$nonopt
- fi
-
- # The real first argument should be the name of the installation program.
- # Aesthetically quote it.
- func_quote_for_eval "$arg"
- func_append install_prog "$func_quote_for_eval_result"
- install_shared_prog=$install_prog
- case " $install_prog " in
- *[\\\ /]cp\ *) install_cp=: ;;
- *) install_cp=false ;;
- esac
-
- # We need to accept at least all the BSD install flags.
- dest=
- files=
- opts=
- prev=
- install_type=
- isdir=no
- stripme=
- no_mode=:
- for arg
- do
- arg2=
- if test -n "$dest"; then
- func_append files " $dest"
- dest=$arg
- continue
- fi
-
- case $arg in
- -d) isdir=yes ;;
- -f)
- if $install_cp; then :; else
- prev=$arg
- fi
- ;;
- -g | -m | -o)
- prev=$arg
- ;;
- -s)
- stripme=" -s"
- continue
- ;;
- -*)
- ;;
- *)
- # If the previous option needed an argument, then skip it.
- if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
- arg2=$install_override_mode
- no_mode=false
- fi
- prev=
- else
- dest=$arg
- continue
- fi
- ;;
- esac
-
- # Aesthetically quote the argument.
- func_quote_for_eval "$arg"
- func_append install_prog " $func_quote_for_eval_result"
- if test -n "$arg2"; then
- func_quote_for_eval "$arg2"
- fi
- func_append install_shared_prog " $func_quote_for_eval_result"
- done
-
- test -z "$install_prog" && \
- func_fatal_help "you must specify an install program"
-
- test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
-
- if test -n "$install_override_mode" && $no_mode; then
- if $install_cp; then :; else
- func_quote_for_eval "$install_override_mode"
- func_append install_shared_prog " -m $func_quote_for_eval_result"
- fi
- fi
-
- if test -z "$files"; then
- if test -z "$dest"; then
- func_fatal_help "no file or destination specified"
- else
- func_fatal_help "you must specify a destination"
- fi
- fi
-
- # Strip any trailing slash from the destination.
- func_stripname '' '/' "$dest"
- dest=$func_stripname_result
-
- # Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
- destname=
- else
- func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
-
- # Not a directory, so check to see that there is only one file specified.
- set dummy $files; shift
- test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
- fi
- case $destdir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- for file in $files; do
- case $file in
- *.lo) ;;
- *)
- func_fatal_help "\`$destdir' must be an absolute directory name"
- ;;
- esac
- done
- ;;
- esac
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- staticlibs=
- future_libdirs=
- current_libdirs=
- for file in $files; do
-
- # Do each installation.
- case $file in
- *.$libext)
- # Do the static libraries later.
- func_append staticlibs " $file"
- ;;
-
- *.la)
- func_resolve_sysroot "$file"
- file=$func_resolve_sysroot_result
-
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
-
- library_names=
- old_library=
- relink_command=
- func_source "$file"
-
- # Add the libdir to current_libdirs if it is the destination.
- if test "X$destdir" = "X$libdir"; then
- case "$current_libdirs " in
- *" $libdir "*) ;;
- *) func_append current_libdirs " $libdir" ;;
- esac
- else
- # Note the libdir as a future libdir.
- case "$future_libdirs " in
- *" $libdir "*) ;;
- *) func_append future_libdirs " $libdir" ;;
- esac
- fi
-
- func_dirname "$file" "/" ""
- dir="$func_dirname_result"
- func_append dir "$objdir"
-
- if test -n "$relink_command"; then
- # Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
- # are installed to the same prefix.
- # At present, this check doesn't affect windows .dll's that
- # are installed into $libdir/../bin (currently, that works fine)
- # but it's something to keep an eye on.
- test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
-
- if test -n "$inst_prefix_dir"; then
- # Stick the inst_prefix_dir data into the link command.
- relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
- else
- relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
- fi
-
- func_warning "relinking \`$file'"
- func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
- fi
-
- # See the names of the shared library.
- set dummy $library_names; shift
- if test -n "$1"; then
- realname="$1"
- shift
-
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
-
- # Install the shared library and build the symlinks.
- func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
- 'exit $?'
- tstripme="$stripme"
- case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- case $realname in
- *.dll.a)
- tstripme=""
- ;;
- esac
- ;;
- esac
- if test -n "$tstripme" && test -n "$striplib"; then
- func_show_eval "$striplib $destdir/$realname" 'exit $?'
- fi
-
- if test "$#" -gt 0; then
- # Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
- # the symlink we replace! Solaris /bin/ln does not understand -f,
- # so we also need to try rm && ln -s.
- for linkname
- do
- test "$linkname" != "$realname" \
- && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
- done
- fi
-
- # Do each command in the postinstall commands.
- lib="$destdir/$realname"
- func_execute_cmds "$postinstall_cmds" 'exit $?'
- fi
-
- # Install the pseudo-library for information purposes.
- func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
- func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
-
- # Maybe install the static library, too.
- test -n "$old_library" && func_append staticlibs " $dir/$old_library"
- ;;
-
- *.lo)
- # Install (i.e. copy) a libtool object.
-
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
- fi
-
- # Deduce the name of the destination old-style object file.
- case $destfile in
- *.lo)
- func_lo2o "$destfile"
- staticdest=$func_lo2o_result
- ;;
- *.$objext)
- staticdest="$destfile"
- destfile=
- ;;
- *)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
- ;;
- esac
-
- # Install the libtool object if requested.
- test -n "$destfile" && \
- func_show_eval "$install_prog $file $destfile" 'exit $?'
-
- # Install the old object if enabled.
- if test "$build_old_libs" = yes; then
- # Deduce the name of the old-style object file.
- func_lo2o "$file"
- staticobj=$func_lo2o_result
- func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
- fi
- exit $EXIT_SUCCESS
- ;;
-
- *)
- # Figure out destination file name, if it wasn't already specified.
- if test -n "$destname"; then
- destfile="$destdir/$destname"
- else
- func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
- fi
-
- # If the file is missing, and there is a .exe on the end, strip it
- # because it is most likely a libtool script we actually want to
- # install
- stripped_ext=""
- case $file in
- *.exe)
- if test ! -f "$file"; then
- func_stripname '' '.exe' "$file"
- file=$func_stripname_result
- stripped_ext=".exe"
- fi
- ;;
- esac
-
- # Do a test to see if this is really a libtool program.
- case $host in
- *cygwin* | *mingw*)
- if func_ltwrapper_executable_p "$file"; then
- func_ltwrapper_scriptname "$file"
- wrapper=$func_ltwrapper_scriptname_result
- else
- func_stripname '' '.exe' "$file"
- wrapper=$func_stripname_result
- fi
- ;;
- *)
- wrapper=$file
- ;;
- esac
- if func_ltwrapper_script_p "$wrapper"; then
- notinst_deplibs=
- relink_command=
-
- func_source "$wrapper"
-
- # Check the variables that should have been set.
- test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
-
- finalize=yes
- for lib in $notinst_deplibs; do
- # Check to see that each library is installed.
- libdir=
- if test -f "$lib"; then
- func_source "$lib"
- fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
- if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
- fi
- done
-
- relink_command=
- func_source "$wrapper"
-
- outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
- $opt_dry_run || {
- if test "$finalize" = yes; then
- tmpdir=`func_mktempdir`
- func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
- # Replace the output file specification.
- relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
-
- $opt_silent || {
- func_quote_for_expand "$relink_command"
- eval "func_echo $func_quote_for_expand_result"
- }
- if eval "$relink_command"; then :
- else
- func_error "error: relink \`$file' with the above command before installing it"
- $opt_dry_run || ${RM}r "$tmpdir"
- continue
- fi
- file="$outputname"
- else
- func_warning "cannot relink \`$file'"
- fi
- }
- else
- # Install the binary that we compiled earlier.
- file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
- fi
- fi
-
- # remove .exe since cygwin /usr/bin/install will append another
- # one anyway
- case $install_prog,$host in
- */usr/bin/install*,*cygwin*)
- case $file:$destfile in
- *.exe:*.exe)
- # this is ok
- ;;
- *.exe:*)
- destfile=$destfile.exe
- ;;
- *:*.exe)
- func_stripname '' '.exe' "$destfile"
- destfile=$func_stripname_result
- ;;
- esac
- ;;
- esac
- func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
- $opt_dry_run || if test -n "$outputname"; then
- ${RM}r "$tmpdir"
- fi
- ;;
- esac
- done
-
- for file in $staticlibs; do
- func_basename "$file"
- name="$func_basename_result"
-
- # Set up the ranlib parameters.
- oldlib="$destdir/$name"
- func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
- tool_oldlib=$func_to_tool_file_result
-
- func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
-
- if test -n "$stripme" && test -n "$old_striplib"; then
- func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
- fi
-
- # Do each command in the postinstall commands.
- func_execute_cmds "$old_postinstall_cmds" 'exit $?'
- done
-
- test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
-
- if test -n "$current_libdirs"; then
- # Maybe just do a dry run.
- $opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
- else
- exit $EXIT_SUCCESS
- fi
-}
-
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
-
-
-# func_generate_dlsyms outputname originator pic_p
-# Extract symbols from dlprefiles and create ${outputname}S.o with
-# a dlpreopen symbol table.
-func_generate_dlsyms ()
-{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
- my_dlsyms=
-
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
- else
- func_error "not configured to extract global symbols from dlpreopened files"
- fi
- fi
-
- if test -n "$my_dlsyms"; then
- case $my_dlsyms in
- "") ;;
- *.c)
- # Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
-
- func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
-
- # Parse the name list into a source file.
- func_verbose "creating $output_objdir/$my_dlsyms"
-
- $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
- relocations are performed -- see ld's documentation on pseudo-relocs. */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data. */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
-/* External symbol declarations for the compiler. */\
-"
-
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
-
- $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
-
- # Add our own program objects to the symbol list.
- progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
- for progfile in $progfiles; do
- func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
- $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
- done
-
- if test -n "$exclude_expsyms"; then
- $opt_dry_run || {
- eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- }
- fi
-
- if test -n "$export_symbols_regex"; then
- $opt_dry_run || {
- eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- }
- fi
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
- $opt_dry_run || {
- $RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
- else
- $opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
- eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
- eval '$MV "$nlist"T "$nlist"'
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
- eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
- ;;
- esac
- }
- fi
- fi
-
- for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
- func_basename "$dlprefile"
- name="$func_basename_result"
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- # if an import library, we need to obtain dlname
- if func_win32_import_lib_p "$dlprefile"; then
- func_tr_sh "$dlprefile"
- eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
- if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
- # Use subshell, to avoid clobbering current variable values
- dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
- func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
- else
- # no lafile. user explicitly requested -dlpreopen <import library>.
- $sharedlib_from_linklib_cmd "$dlprefile"
- dlprefile_dlbasename=$sharedlib_from_linklib_result
- fi
- fi
- $opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
- eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
- else
- func_warning "Could not compute DLL name from $name"
- eval '$ECHO ": $name " >> "$nlist"'
- fi
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
- $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
- }
- else # not an import lib
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
- fi
- ;;
- *)
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
- ;;
- esac
- done
-
- $opt_dry_run || {
- # Make sure we have at least an empty file.
- test -f "$nlist" || : > "$nlist"
-
- if test -n "$exclude_expsyms"; then
- $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
- $MV "$nlist"T "$nlist"
- fi
-
- # Try sorting and uniquifying the output.
- if $GREP -v "^: " < "$nlist" |
- if sort -k 3 </dev/null >/dev/null 2>&1; then
- sort -k 3
- else
- sort +2
- fi |
- uniq > "$nlist"S; then
- :
- else
- $GREP -v "^: " < "$nlist" > "$nlist"S
- fi
-
- if test -f "$nlist"S; then
- eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
- else
- echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
- fi
-
- echo >> "$output_objdir/$my_dlsyms" "\
-
-/* The mapping between symbol names and symbols. */
-typedef struct {
- const char *name;
- void *address;
-} lt_dlsymlist;
-extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
-LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
-
- case $need_lib_prefix in
- no)
- eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
- ;;
- *)
- eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
- ;;
- esac
- echo >> "$output_objdir/$my_dlsyms" "\
- {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt_${my_prefix}_LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
- } # !$opt_dry_run
-
- pic_flag_for_symtable=
- case "$compile_command " in
- *" -static "*) ;;
- *)
- case $host in
- # compiling the symbol table file with pic_flag works around
- # a FreeBSD bug that causes programs to crash when -lm is
- # linked before any other PIC object. But we must not use
- # pic_flag when linking with -static. The problem exists in
- # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
- *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
- *-*-hpux*)
- pic_flag_for_symtable=" $pic_flag" ;;
- *)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
- ;;
- esac
- ;;
- esac
- symtab_cflags=
- for arg in $LTCFLAGS; do
- case $arg in
- -pie | -fpie | -fPIE) ;;
- *) func_append symtab_cflags " $arg" ;;
- esac
- done
-
- # Now compile the dynamic symbol file.
- func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
-
- # Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
-
- # Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- if test -f "$output_objdir/$my_outputname.def"; then
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- else
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- fi
- ;;
- *)
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- ;;
- esac
- ;;
- *)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
- ;;
- esac
- else
- # We keep going just in case the user didn't refer to
- # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
- # really was required.
-
- # Nullify the symbol file.
- compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
- fi
-}
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
-func_win32_libid ()
-{
- $opt_debug
- win32_libid_type="unknown"
- win32_fileres=`file -L $1 2>/dev/null`
- case $win32_fileres in
- *ar\ archive\ import\ library*) # definitely import
- win32_libid_type="x86 archive import"
- ;;
- *ar\ archive*) # could be an import, or static
- # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
- if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
- $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
- 1,100{
- / I /{
- s,.*,import,
- p
- q
- }
- }'`
- case $win32_nmres in
- import*) win32_libid_type="x86 archive import";;
- *) win32_libid_type="x86 archive static";;
- esac
- fi
- ;;
- *DLL*)
- win32_libid_type="x86 DLL"
- ;;
- *executable*) # but shell scripts are "executable" too...
- case $win32_fileres in
- *MS\ Windows\ PE\ Intel*)
- win32_libid_type="x86 DLL"
- ;;
- esac
- ;;
- esac
- $ECHO "$win32_libid_type"
-}
-
-# func_cygming_dll_for_implib ARG
-#
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-# Invoked by eval'ing the libtool variable
-# $sharedlib_from_linklib_cmd
-# Result is available in the variable
-# $sharedlib_from_linklib_result
-func_cygming_dll_for_implib ()
-{
- $opt_debug
- sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-}
-
-# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-#
-# The is the core of a fallback implementation of a
-# platform-specific function to extract the name of the
-# DLL associated with the specified import library LIBNAME.
-#
-# SECTION_NAME is either .idata$6 or .idata$7, depending
-# on the platform and compiler that created the implib.
-#
-# Echos the name of the DLL associated with the
-# specified import library.
-func_cygming_dll_for_implib_fallback_core ()
-{
- $opt_debug
- match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
- $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
- $SED '/^Contents of section '"$match_literal"':/{
- # Place marker at beginning of archive member dllname section
- s/.*/====MARK====/
- p
- d
- }
- # These lines can sometimes be longer than 43 characters, but
- # are always uninteresting
- /:[ ]*file format pe[i]\{,1\}-/d
- /^In archive [^:]*:/d
- # Ensure marker is printed
- /^====MARK====/p
- # Remove all lines with less than 43 characters
- /^.\{43\}/!d
- # From remaining lines, remove first 43 characters
- s/^.\{43\}//' |
- $SED -n '
- # Join marker and all lines until next marker into a single line
- /^====MARK====/ b para
- H
- $ b para
- b
- :para
- x
- s/\n//g
- # Remove the marker
- s/^====MARK====//
- # Remove trailing dots and whitespace
- s/[\. \t]*$//
- # Print
- /./p' |
- # we now have a list, one entry per line, of the stringified
- # contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
- # a '.' (that is, objdump's representation of an unprintable
- # character.) This should work for all archives with less than
- # 0x302f exports -- but will fail for DLLs whose name actually
- # begins with a literal '.' or a single character followed by
- # a '.'.
- #
- # Of those that remain, print the first one.
- $SED -e '/^\./d;/^.\./d;q'
-}
-
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
-# func_cygming_dll_for_implib_fallback ARG
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-#
-# This fallback implementation is for use when $DLLTOOL
-# does not support the --identify-strict option.
-# Invoked by eval'ing the libtool variable
-# $sharedlib_from_linklib_cmd
-# Result is available in the variable
-# $sharedlib_from_linklib_result
-func_cygming_dll_for_implib_fallback ()
-{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
- # binutils import library
- sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
- # ms-generated import library
- sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
- else
- # unknown
- sharedlib_from_linklib_result=""
- fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
- lockfile=$f_ex_an_ar_oldlib.lock
- until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
- func_echo "Waiting for $lockfile to be removed"
- sleep 2
- done
- fi
- func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
- 'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
- $opt_dry_run || rm -f "$lockfile"
- fi
- if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
- fi
-}
-
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
- $opt_debug
- my_gentop="$1"; shift
- my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
-
- for my_xlib in $my_oldlibs; do
- # Extract the objects.
- case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
- *) my_xabs=`pwd`"/$my_xlib" ;;
- esac
- func_basename "$my_xlib"
- my_xlib="$func_basename_result"
- my_xlib_u=$my_xlib
- while :; do
- case " $extracted_archives " in
- *" $my_xlib_u "*)
- func_arith $extracted_serial + 1
- extracted_serial=$func_arith_result
- my_xlib_u=lt$extracted_serial-$my_xlib ;;
- *) break ;;
- esac
- done
- extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
-
- func_mkdir_p "$my_xdir"
-
- case $host in
- *-darwin*)
- func_verbose "Extracting $my_xabs"
- # Do not bother doing anything if just a dry run
- $opt_dry_run || {
- darwin_orig_dir=`pwd`
- cd $my_xdir || exit $?
- darwin_archive=$my_xabs
- darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
- darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
- if test -n "$darwin_arches"; then
- darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
- darwin_arch=
- func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
- cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
- done # $darwin_arches
- ## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
- darwin_file=
- darwin_files=
- for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
- $LIPO -create -output "$darwin_file" $darwin_files
- done # $darwin_filelist
- $RM -rf unfat-$$
- cd "$darwin_orig_dir"
- else
- cd $darwin_orig_dir
- func_extract_an_archive "$my_xdir" "$my_xabs"
- fi # $darwin_arches
- } # !$opt_dry_run
- ;;
- *)
- func_extract_an_archive "$my_xdir" "$my_xabs"
- ;;
- esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
- done
-
- func_extract_archives_result="$my_oldobjs"
-}
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable. Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory. This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
- func_emit_wrapper_arg1=${1-no}
-
- $ECHO "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
- emulate sh
- NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
- # install mode needs the following variables:
- generated_by_libtool_version='$macro_version'
- notinst_deplibs='$notinst_deplibs'
-else
- # When we are sourced in execute mode, \$file and \$ECHO are already set.
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- file=\"\$0\""
-
- qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
- $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
- ECHO=\"$qECHO\"
- fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
- lt_script_arg0=\$0
- shift
- for lt_opt
- do
- case \"\$lt_opt\" in
- --lt-debug) lt_option_debug=1 ;;
- --lt-dump-script)
- lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
- test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
- lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
- cat \"\$lt_dump_D/\$lt_dump_F\"
- exit 0
- ;;
- --lt-*)
- \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
- exit 1
- ;;
- esac
- done
-
- # Print the debug banner immediately:
- if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
- fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
- lt_dump_args_N=1;
- for lt_arg
- do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
- lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
- done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2* | *-cegcc*)
- $ECHO "\
- if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
- func_lt_dump_args \${1+\"\$@\"} 1>&2
- fi
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $ECHO "\
- if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
- func_lt_dump_args \${1+\"\$@\"} 1>&2
- fi
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
- ;;
- esac
- $ECHO "\
- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
- exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
- case \" \$* \" in
- *\\ --lt-*)
- for lt_wr_arg
- do
- case \$lt_wr_arg in
- --lt-*) ;;
- *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
- esac
- shift
- done ;;
- esac
- func_exec_program_core \${1+\"\$@\"}
-}
-
- # Parse options
- func_parse_lt_options \"\$0\" \${1+\"\$@\"}
-
- # Find the directory that this script lives in.
- thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
- test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
- # Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
- while test -n \"\$file\"; do
- destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
-
- # If there was a directory component, then change thisdir.
- if test \"x\$destdir\" != \"x\$file\"; then
- case \"\$destdir\" in
- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
- *) thisdir=\"\$thisdir/\$destdir\" ;;
- esac
- fi
-
- file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
- done
-
- # Usually 'no', except on cygwin/mingw when embedded into
- # the cwrapper.
- WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
- if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
- # special case for '.'
- if test \"\$thisdir\" = \".\"; then
- thisdir=\`pwd\`
- fi
- # remove .libs from thisdir
- case \"\$thisdir\" in
- *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
- $objdir ) thisdir=. ;;
- esac
- fi
-
- # Try to get the absolute directory name.
- absdir=\`cd \"\$thisdir\" && pwd\`
- test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
- if test "$fast_install" = yes; then
- $ECHO "\
- program=lt-'$outputname'$exeext
- progdir=\"\$thisdir/$objdir\"
-
- if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
- test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
- file=\"\$\$-\$program\"
-
- if test ! -d \"\$progdir\"; then
- $MKDIR \"\$progdir\"
- else
- $RM \"\$progdir/\$file\"
- fi"
-
- $ECHO "\
-
- # relink executable if necessary
- if test -n \"\$relink_command\"; then
- if relink_command_output=\`eval \$relink_command 2>&1\`; then :
- else
- $ECHO \"\$relink_command_output\" >&2
- $RM \"\$progdir/\$file\"
- exit 1
- fi
- fi
-
- $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
- { $RM \"\$progdir/\$program\";
- $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
- $RM \"\$progdir/\$file\"
- fi"
- else
- $ECHO "\
- program='$outputname'
- progdir=\"\$thisdir/$objdir\"
-"
- fi
-
- $ECHO "\
-
- if test -f \"\$progdir/\$program\"; then"
-
- # fixup the dll searchpath if we need to.
- #
- # Fix the DLL searchpath if we need to. Do this before prepending
- # to shlibpath, because on Windows, both are PATH and uninstalled
- # libraries must come first.
- if test -n "$dllsearchpath"; then
- $ECHO "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
- # Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- $ECHO "\
- # Add our own library path to $shlibpath_var
- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
- # Some systems cannot cope with colon-terminated $shlibpath_var
- # The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
-
- export $shlibpath_var
-"
- fi
-
- $ECHO "\
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- # Run the actual program with our arguments.
- func_exec_program \${1+\"\$@\"}
- fi
- else
- # The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
- \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
- \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
- fi
-fi\
-"
-}
-
-
-# func_emit_cwrapperexe_src
-# emit the source code for a wrapper executable on stdout
-# Must ONLY be called from within func_mode_link because
-# it depends on a number of variable set therein.
-func_emit_cwrapperexe_src ()
-{
- cat <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-
- The $output program cannot be directly executed until all the libtool
- libraries that it depends on are installed.
-
- This wrapper executable should never be moved out of the build directory.
- If it is, it will not operate correctly.
-*/
-EOF
- cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
-#include <stdio.h>
-#include <stdlib.h>
-#ifdef _MSC_VER
-# include <direct.h>
-# include <process.h>
-# include <io.h>
-#else
-# include <unistd.h>
-# include <stdint.h>
-# ifdef __CYGWIN__
-# include <io.h>
-# endif
-#endif
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat _stat
-# define chmod _chmod
-# define getcwd _getcwd
-# define putenv _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat _stat
-# define chmod _chmod
-# define getcwd _getcwd
-# define putenv _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef S_IXOTH
-# define S_IXOTH 0
-#endif
-#ifndef S_IXGRP
-# define S_IXGRP 0
-#endif
-
-/* path handling portability macros */
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# define FOPEN_WB "wb"
-# ifndef DIR_SEPARATOR_2
-# define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-# define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#ifndef FOPEN_WB
-# define FOPEN_WB "w"
-#endif
-#ifndef _O_BINARY
-# define _O_BINARY 0
-#endif
-
-#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
-#else
-static int lt_debug = 0;
-#endif
-
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
-
-void *xmalloc (size_t num);
-char *xstrdup (const char *string);
-const char *base_name (const char *name);
-char *find_executable (const char *wrapper);
-char *chase_symlinks (const char *pathspec);
-int make_executable (const char *path);
-int check_executable (const char *path);
-char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
-void lt_setenv (const char *name, const char *value);
-char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_update_exe_path (const char *name, const char *value);
-void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
-EOF
-
- cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
-const char * LIB_PATH_VARNAME = "$shlibpath_var";
-EOF
-
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- func_to_host_path "$temp_rpath"
- cat <<EOF
-const char * LIB_PATH_VALUE = "$func_to_host_path_result";
-EOF
- else
- cat <<"EOF"
-const char * LIB_PATH_VALUE = "";
-EOF
- fi
-
- if test -n "$dllsearchpath"; then
- func_to_host_path "$dllsearchpath:"
- cat <<EOF
-const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE = "$func_to_host_path_result";
-EOF
- else
- cat <<"EOF"
-const char * EXE_PATH_VARNAME = "";
-const char * EXE_PATH_VALUE = "";
-EOF
- fi
-
- if test "$fast_install" = yes; then
- cat <<EOF
-const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
-EOF
- else
- cat <<EOF
-const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
-EOF
- fi
-
-
- cat <<"EOF"
-
-#define LTWRAPPER_OPTION_PREFIX "--lt-"
-
-static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
-
-int
-main (int argc, char *argv[])
-{
- char **newargz;
- int newargc;
- char *tmp_pathspec;
- char *actual_cwrapper_path;
- char *actual_cwrapper_name;
- char *target_name;
- char *lt_argv_zero;
- intptr_t rval = 127;
-
- int i;
-
- program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
-
- /* very simple arg parsing; don't want to rely on getopt
- * also, copy all non cwrapper options to newargz, except
- * argz[0], which is handled differently
- */
- newargc=0;
- for (i = 1; i < argc; i++)
- {
- if (strcmp (argv[i], dumpscript_opt) == 0)
- {
-EOF
- case "$host" in
- *mingw* | *cygwin* )
- # make stdout use "unix" line endings
- echo " setmode(1,_O_BINARY);"
- ;;
- esac
-
- cat <<"EOF"
- lt_dump_script (stdout);
- return 0;
- }
- if (strcmp (argv[i], debug_opt) == 0)
- {
- lt_debug = 1;
- continue;
- }
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
- {
- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
- namespace, but it is not one of the ones we know about and
- have already dealt with, above (inluding dump-script), then
- report an error. Otherwise, targets might begin to believe
- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
- namespace. The first time any user complains about this, we'll
- need to make LTWRAPPER_OPTION_PREFIX a configure-time option
- or a configure.ac-settable value.
- */
- lt_fatal (__FILE__, __LINE__,
- "unrecognized %s option: '%s'",
- ltwrapper_option_prefix, argv[i]);
- }
- /* otherwise ... */
- newargz[++newargc] = xstrdup (argv[i]);
- }
- newargz[++newargc] = NULL;
-
-EOF
- cat <<EOF
- /* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
- cat <<"EOF"
- lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
- lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
-
- tmp_pathspec = find_executable (argv[0]);
- if (tmp_pathspec == NULL)
- lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
- lt_debugprintf (__FILE__, __LINE__,
- "(main) found exe (before symlink chase) at: %s\n",
- tmp_pathspec);
-
- actual_cwrapper_path = chase_symlinks (tmp_pathspec);
- lt_debugprintf (__FILE__, __LINE__,
- "(main) found exe (after symlink chase) at: %s\n",
- actual_cwrapper_path);
- XFREE (tmp_pathspec);
-
- actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
- strendzap (actual_cwrapper_path, actual_cwrapper_name);
-
- /* wrapper name transforms */
- strendzap (actual_cwrapper_name, ".exe");
- tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
- XFREE (actual_cwrapper_name);
- actual_cwrapper_name = tmp_pathspec;
- tmp_pathspec = 0;
-
- /* target_name transforms -- use actual target program name; might have lt- prefix */
- target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
- strendzap (target_name, ".exe");
- tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
- XFREE (target_name);
- target_name = tmp_pathspec;
- tmp_pathspec = 0;
-
- lt_debugprintf (__FILE__, __LINE__,
- "(main) libtool target name: %s\n",
- target_name);
-EOF
-
- cat <<EOF
- newargz[0] =
- XMALLOC (char, (strlen (actual_cwrapper_path) +
- strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
- strcpy (newargz[0], actual_cwrapper_path);
- strcat (newargz[0], "$objdir");
- strcat (newargz[0], "/");
-EOF
-
- cat <<"EOF"
- /* stop here, and copy so we don't have to do this twice */
- tmp_pathspec = xstrdup (newargz[0]);
-
- /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
- strcat (newargz[0], actual_cwrapper_name);
-
- /* DO want the lt- prefix here if it exists, so use target_name */
- lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
- XFREE (tmp_pathspec);
- tmp_pathspec = NULL;
-EOF
-
- case $host_os in
- mingw*)
- cat <<"EOF"
- {
- char* p;
- while ((p = strchr (newargz[0], '\\')) != NULL)
- {
- *p = '/';
- }
- while ((p = strchr (lt_argv_zero, '\\')) != NULL)
- {
- *p = '/';
- }
- }
-EOF
- ;;
- esac
-
- cat <<"EOF"
- XFREE (target_name);
- XFREE (actual_cwrapper_path);
- XFREE (actual_cwrapper_name);
-
- lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
- lt_setenv ("DUALCASE", "1"); /* for MSK sh */
- /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
- be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
- because on Windows, both *_VARNAMEs are PATH but uninstalled
- libraries must come first. */
- lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
- lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
-
- lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
- nonnull (lt_argv_zero));
- for (i = 0; i < newargc; i++)
- {
- lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
- i, nonnull (newargz[i]));
- }
-
-EOF
-
- case $host_os in
- mingw*)
- cat <<"EOF"
- /* execv doesn't actually work on mingw as expected on unix */
- newargz = prepare_spawn (newargz);
- rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
- if (rval == -1)
- {
- /* failed to start process */
- lt_debugprintf (__FILE__, __LINE__,
- "(main) failed to launch target \"%s\": %s\n",
- lt_argv_zero, nonnull (strerror (errno)));
- return 127;
- }
- return rval;
-EOF
- ;;
- *)
- cat <<"EOF"
- execv (lt_argv_zero, newargz);
- return rval; /* =127, but avoids unused variable warning */
-EOF
- ;;
- esac
-
- cat <<"EOF"
-}
-
-void *
-xmalloc (size_t num)
-{
- void *p = (void *) malloc (num);
- if (!p)
- lt_fatal (__FILE__, __LINE__, "memory exhausted");
-
- return p;
-}
-
-char *
-xstrdup (const char *string)
-{
- return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
- string) : NULL;
-}
-
-const char *
-base_name (const char *name)
-{
- const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- /* Skip over the disk name in MSDOS pathnames. */
- if (isalpha ((unsigned char) name[0]) && name[1] == ':')
- name += 2;
-#endif
-
- for (base = name; *name; name++)
- if (IS_DIR_SEPARATOR (*name))
- base = name + 1;
- return base;
-}
-
-int
-check_executable (const char *path)
-{
- struct stat st;
-
- lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
- nonempty (path));
- if ((!path) || (!*path))
- return 0;
-
- if ((stat (path, &st) >= 0)
- && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
- return 1;
- else
- return 0;
-}
-
-int
-make_executable (const char *path)
-{
- int rval = 0;
- struct stat st;
-
- lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
- nonempty (path));
- if ((!path) || (!*path))
- return 0;
-
- if (stat (path, &st) >= 0)
- {
- rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
- }
- return rval;
-}
-
-/* Searches for the full path of the wrapper. Returns
- newly allocated full path name if found, NULL otherwise
- Does not chase symlinks, even on platforms that support them.
-*/
-char *
-find_executable (const char *wrapper)
-{
- int has_slash = 0;
- const char *p;
- const char *p_next;
- /* static buffer for getcwd */
- char tmp[LT_PATHMAX + 1];
- int tmp_len;
- char *concat_name;
-
- lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
- nonempty (wrapper));
-
- if ((wrapper == NULL) || (*wrapper == '\0'))
- return NULL;
-
- /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
- {
- concat_name = xstrdup (wrapper);
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- }
- else
- {
-#endif
- if (IS_DIR_SEPARATOR (wrapper[0]))
- {
- concat_name = xstrdup (wrapper);
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
- }
-#endif
-
- for (p = wrapper; *p; p++)
- if (*p == '/')
- {
- has_slash = 1;
- break;
- }
- if (!has_slash)
- {
- /* no slashes; search PATH */
- const char *path = getenv ("PATH");
- if (path != NULL)
- {
- for (p = path; *p; p = p_next)
- {
- const char *q;
- size_t p_len;
- for (q = p; *q; q++)
- if (IS_PATH_SEPARATOR (*q))
- break;
- p_len = q - p;
- p_next = (*q == '\0' ? q : q + 1);
- if (p_len == 0)
- {
- /* empty path: current directory */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
- nonnull (strerror (errno)));
- tmp_len = strlen (tmp);
- concat_name =
- XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
- }
- else
- {
- concat_name =
- XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
- memcpy (concat_name, p, p_len);
- concat_name[p_len] = '/';
- strcpy (concat_name + p_len + 1, wrapper);
- }
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- }
- }
- /* not found in PATH; assume curdir */
- }
- /* Relative path | not found in path: prepend cwd */
- if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
- nonnull (strerror (errno)));
- tmp_len = strlen (tmp);
- concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
- memcpy (concat_name, tmp, tmp_len);
- concat_name[tmp_len] = '/';
- strcpy (concat_name + tmp_len + 1, wrapper);
-
- if (check_executable (concat_name))
- return concat_name;
- XFREE (concat_name);
- return NULL;
-}
-
-char *
-chase_symlinks (const char *pathspec)
-{
-#ifndef S_ISLNK
- return xstrdup (pathspec);
-#else
- char buf[LT_PATHMAX];
- struct stat s;
- char *tmp_pathspec = xstrdup (pathspec);
- char *p;
- int has_symlinks = 0;
- while (strlen (tmp_pathspec) && !has_symlinks)
- {
- lt_debugprintf (__FILE__, __LINE__,
- "checking path component for symlinks: %s\n",
- tmp_pathspec);
- if (lstat (tmp_pathspec, &s) == 0)
- {
- if (S_ISLNK (s.st_mode) != 0)
- {
- has_symlinks = 1;
- break;
- }
-
- /* search backwards for last DIR_SEPARATOR */
- p = tmp_pathspec + strlen (tmp_pathspec) - 1;
- while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
- p--;
- if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
- {
- /* no more DIR_SEPARATORS left */
- break;
- }
- *p = '\0';
- }
- else
- {
- lt_fatal (__FILE__, __LINE__,
- "error accessing file \"%s\": %s",
- tmp_pathspec, nonnull (strerror (errno)));
- }
- }
- XFREE (tmp_pathspec);
-
- if (!has_symlinks)
- {
- return xstrdup (pathspec);
- }
-
- tmp_pathspec = realpath (pathspec, buf);
- if (tmp_pathspec == 0)
- {
- lt_fatal (__FILE__, __LINE__,
- "could not follow symlinks for %s", pathspec);
- }
- return xstrdup (tmp_pathspec);
-#endif
-}
-
-char *
-strendzap (char *str, const char *pat)
-{
- size_t len, patlen;
-
- assert (str != NULL);
- assert (pat != NULL);
-
- len = strlen (str);
- patlen = strlen (pat);
-
- if (patlen <= len)
- {
- str += len - patlen;
- if (strcmp (str, pat) == 0)
- *str = '\0';
- }
- return str;
-}
-
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
- va_list args;
- if (lt_debug)
- {
- (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
- va_start (args, fmt);
- (void) vfprintf (stderr, fmt, args);
- va_end (args);
- }
-}
-
-static void
-lt_error_core (int exit_status, const char *file,
- int line, const char *mode,
- const char *message, va_list ap)
-{
- fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
- vfprintf (stderr, message, ap);
- fprintf (stderr, ".\n");
-
- if (exit_status >= 0)
- exit (exit_status);
-}
-
-void
-lt_fatal (const char *file, int line, const char *message, ...)
-{
- va_list ap;
- va_start (ap, message);
- lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
- va_end (ap);
-}
-
-static const char *
-nonnull (const char *s)
-{
- return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
- return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
-void
-lt_setenv (const char *name, const char *value)
-{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_setenv) setting '%s' to '%s'\n",
- nonnull (name), nonnull (value));
- {
-#ifdef HAVE_SETENV
- /* always make a copy, for consistency with !HAVE_SETENV */
- char *str = xstrdup (value);
- setenv (name, str, 1);
-#else
- int len = strlen (name) + 1 + strlen (value) + 1;
- char *str = XMALLOC (char, len);
- sprintf (str, "%s=%s", name, value);
- if (putenv (str) != EXIT_SUCCESS)
- {
- XFREE (str);
- }
-#endif
- }
-}
-
-char *
-lt_extend_str (const char *orig_value, const char *add, int to_end)
-{
- char *new_value;
- if (orig_value && *orig_value)
- {
- int orig_value_len = strlen (orig_value);
- int add_len = strlen (add);
- new_value = XMALLOC (char, add_len + orig_value_len + 1);
- if (to_end)
- {
- strcpy (new_value, orig_value);
- strcpy (new_value + orig_value_len, add);
- }
- else
- {
- strcpy (new_value, add);
- strcpy (new_value + add_len, orig_value);
- }
- }
- else
- {
- new_value = xstrdup (add);
- }
- return new_value;
-}
-
-void
-lt_update_exe_path (const char *name, const char *value)
-{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
- nonnull (name), nonnull (value));
-
- if (name && *name && value && *value)
- {
- char *new_value = lt_extend_str (getenv (name), value, 0);
- /* some systems can't cope with a ':'-terminated path #' */
- int len = strlen (new_value);
- while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
- {
- new_value[len-1] = '\0';
- }
- lt_setenv (name, new_value);
- XFREE (new_value);
- }
-}
-
-void
-lt_update_lib_path (const char *name, const char *value)
-{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
- nonnull (name), nonnull (value));
-
- if (name && *name && value && *value)
- {
- char *new_value = lt_extend_str (getenv (name), value, 0);
- lt_setenv (name, new_value);
- XFREE (new_value);
- }
-}
-
-EOF
- case $host_os in
- mingw*)
- cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
- Note that spawn() does not by itself call the command interpreter
- (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
- ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
- GetVersionEx(&v);
- v.dwPlatformId == VER_PLATFORM_WIN32_NT;
- }) ? "cmd.exe" : "command.com").
- Instead it simply concatenates the arguments, separated by ' ', and calls
- CreateProcess(). We must quote the arguments since Win32 CreateProcess()
- interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
- special way:
- - Space and tab are interpreted as delimiters. They are not treated as
- delimiters if they are surrounded by double quotes: "...".
- - Unescaped double quotes are removed from the input. Their only effect is
- that within double quotes, space and tab are treated like normal
- characters.
- - Backslashes not followed by double quotes are not special.
- - But 2*n+1 backslashes followed by a double quote become
- n backslashes followed by a double quote (n >= 0):
- \" -> "
- \\\" -> \"
- \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
- size_t argc;
- char **new_argv;
- size_t i;
-
- /* Count number of arguments. */
- for (argc = 0; argv[argc] != NULL; argc++)
- ;
-
- /* Allocate new argument vector. */
- new_argv = XMALLOC (char *, argc + 1);
-
- /* Put quoted arguments into the new argument vector. */
- for (i = 0; i < argc; i++)
- {
- const char *string = argv[i];
-
- if (string[0] == '\0')
- new_argv[i] = xstrdup ("\"\"");
- else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
- {
- int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
- size_t length;
- unsigned int backslashes;
- const char *s;
- char *quoted_string;
- char *p;
-
- length = 0;
- backslashes = 0;
- if (quote_around)
- length++;
- for (s = string; *s != '\0'; s++)
- {
- char c = *s;
- if (c == '"')
- length += backslashes + 1;
- length++;
- if (c == '\\')
- backslashes++;
- else
- backslashes = 0;
- }
- if (quote_around)
- length += backslashes + 1;
-
- quoted_string = XMALLOC (char, length + 1);
-
- p = quoted_string;
- backslashes = 0;
- if (quote_around)
- *p++ = '"';
- for (s = string; *s != '\0'; s++)
- {
- char c = *s;
- if (c == '"')
- {
- unsigned int j;
- for (j = backslashes + 1; j > 0; j--)
- *p++ = '\\';
- }
- *p++ = c;
- if (c == '\\')
- backslashes++;
- else
- backslashes = 0;
- }
- if (quote_around)
- {
- unsigned int j;
- for (j = backslashes; j > 0; j--)
- *p++ = '\\';
- *p++ = '"';
- }
- *p = '\0';
-
- new_argv[i] = quoted_string;
- }
- else
- new_argv[i] = (char *) string;
- }
- new_argv[argc] = NULL;
-
- return new_argv;
-}
-EOF
- ;;
- esac
-
- cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
- func_emit_wrapper yes |
- $SED -n -e '
-s/^\(.\{79\}\)\(..*\)/\1\
-\2/
-h
-s/\([\\"]\)/\\\1/g
-s/$/\\n/
-s/\([^\n]*\).*/ fputs ("\1", f);/p
-g
-D'
- cat <<"EOF"
-}
-EOF
-}
-# end: func_emit_cwrapperexe_src
-
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
- $opt_debug
- case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
- *import*) : ;;
- *) false ;;
- esac
-}
-
-# func_mode_link arg...
-func_mode_link ()
-{
- $opt_debug
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- # It is impossible to link a dll without this setting, and
- # we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
- # flag for every libtool invocation.
- # allow_undefined=no
-
- # FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
- # even a static library is built. For now, we need to specify
- # -no-undefined on the libtool link line when we can be certain
- # that all symbols are satisfied, otherwise we get a static library.
- allow_undefined=yes
- ;;
- *)
- allow_undefined=yes
- ;;
- esac
- libtool_args=$nonopt
- base_compile="$nonopt $@"
- compile_command=$nonopt
- finalize_command=$nonopt
-
- compile_rpath=
- finalize_rpath=
- compile_shlibpath=
- finalize_shlibpath=
- convenience=
- old_convenience=
- deplibs=
- old_deplibs=
- compiler_flags=
- linker_flags=
- dllsearchpath=
- lib_search_path=`pwd`
- inst_prefix_dir=
- new_inherited_linker_flags=
-
- avoid_version=no
- bindir=
- dlfiles=
- dlprefiles=
- dlself=no
- export_dynamic=no
- export_symbols=
- export_symbols_regex=
- generated=
- libobjs=
- ltlibs=
- module=no
- no_install=no
- objs=
- non_pic_objects=
- precious_files_regex=
- prefer_static_libs=no
- preload=no
- prev=
- prevarg=
- release=
- rpath=
- xrpath=
- perm_rpath=
- temp_rpath=
- thread_safe=no
- vinfo=
- vinfo_number=no
- weak_libs=
- single_module="${wl}-single_module"
- func_infer_tag $base_compile
-
- # We need to know -static, to get the right output filenames.
- for arg
- do
- case $arg in
- -shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
- build_old_libs=no
- break
- ;;
- -all-static | -static | -static-libtool-libs)
- case $arg in
- -all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
- func_warning "complete static linking is impossible in this configuration"
- fi
- if test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- -static)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=built
- ;;
- -static-libtool-libs)
- if test -z "$pic_flag" && test -n "$link_static_flag"; then
- dlopen_self=$dlopen_self_static
- fi
- prefer_static_libs=yes
- ;;
- esac
- build_libtool_libs=no
- build_old_libs=yes
- break
- ;;
- esac
- done
-
- # See if our shared archives depend on static archives.
- test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
- # Go through the arguments, transforming them on the way.
- while test "$#" -gt 0; do
- arg="$1"
- shift
- func_quote_for_eval "$arg"
- qarg=$func_quote_for_eval_unquoted_result
- func_append libtool_args " $func_quote_for_eval_result"
-
- # If the previous option needs an argument, assign it.
- if test -n "$prev"; then
- case $prev in
- output)
- func_append compile_command " @OUTPUT@"
- func_append finalize_command " @OUTPUT@"
- ;;
- esac
-
- case $prev in
- bindir)
- bindir="$arg"
- prev=
- continue
- ;;
- dlfiles|dlprefiles)
- if test "$preload" = no; then
- # Add the symbol object into the linking commands.
- func_append compile_command " @SYMFILE@"
- func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
- case $arg in
- *.la | *.lo) ;; # We handle these cases below.
- force)
- if test "$dlself" = no; then
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- self)
- if test "$prev" = dlprefiles; then
- dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
- dlself=yes
- else
- dlself=needless
- export_dynamic=yes
- fi
- prev=
- continue
- ;;
- *)
- if test "$prev" = dlfiles; then
- func_append dlfiles " $arg"
- else
- func_append dlprefiles " $arg"
- fi
- prev=
- continue
- ;;
- esac
- ;;
- expsyms)
- export_symbols="$arg"
- test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
- prev=
- continue
- ;;
- expsyms_regex)
- export_symbols_regex="$arg"
- prev=
- continue
- ;;
- framework)
- case $host in
- *-*-darwin*)
- case "$deplibs " in
- *" $qarg.ltframework "*) ;;
- *) func_append deplibs " $qarg.ltframework" # this is fixed later
- ;;
- esac
- ;;
- esac
- prev=
- continue
- ;;
- inst_prefix)
- inst_prefix_dir="$arg"
- prev=
- continue
- ;;
- objectlist)
- if test -f "$arg"; then
- save_arg=$arg
- moreargs=
- for fil in `cat "$save_arg"`
- do
-# func_append moreargs " $fil"
- arg=$fil
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if func_lalib_unsafe_p "$arg"; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- func_source "$arg"
-
- if test -z "$pic_object" ||
- test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
- fi
-
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- func_append dlfiles " $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- func_append dlprefiles " $pic_object"
- prev=
- fi
-
- # A PIC object.
- func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- func_append non_pic_objects " $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if $opt_dry_run; then
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- func_lo2o "$arg"
- pic_object=$xdir$objdir/$func_lo2o_result
- non_pic_object=$xdir$func_lo2o_result
- func_append libobjs " $pic_object"
- func_append non_pic_objects " $non_pic_object"
- else
- func_fatal_error "\`$arg' is not a valid libtool object"
- fi
- fi
- done
- else
- func_fatal_error "link input file \`$arg' does not exist"
- fi
- arg=$save_arg
- prev=
- continue
- ;;
- precious_regex)
- precious_files_regex="$arg"
- prev=
- continue
- ;;
- release)
- release="-$arg"
- prev=
- continue
- ;;
- rpath | xrpath)
- # We need an absolute path.
- case $arg in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- func_fatal_error "only absolute run-paths are allowed"
- ;;
- esac
- if test "$prev" = rpath; then
- case "$rpath " in
- *" $arg "*) ;;
- *) func_append rpath " $arg" ;;
- esac
- else
- case "$xrpath " in
- *" $arg "*) ;;
- *) func_append xrpath " $arg" ;;
- esac
- fi
- prev=
- continue
- ;;
- shrext)
- shrext_cmds="$arg"
- prev=
- continue
- ;;
- weak)
- func_append weak_libs " $arg"
- prev=
- continue
- ;;
- xcclinker)
- func_append linker_flags " $qarg"
- func_append compiler_flags " $qarg"
- prev=
- func_append compile_command " $qarg"
- func_append finalize_command " $qarg"
- continue
- ;;
- xcompiler)
- func_append compiler_flags " $qarg"
- prev=
- func_append compile_command " $qarg"
- func_append finalize_command " $qarg"
- continue
- ;;
- xlinker)
- func_append linker_flags " $qarg"
- func_append compiler_flags " $wl$qarg"
- prev=
- func_append compile_command " $wl$qarg"
- func_append finalize_command " $wl$qarg"
- continue
- ;;
- *)
- eval "$prev=\"\$arg\""
- prev=
- continue
- ;;
- esac
- fi # test -n "$prev"
-
- prevarg="$arg"
-
- case $arg in
- -all-static)
- if test -n "$link_static_flag"; then
- # See comment for -static flag below, for more details.
- func_append compile_command " $link_static_flag"
- func_append finalize_command " $link_static_flag"
- fi
- continue
- ;;
-
- -allow-undefined)
- # FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
- ;;
-
- -avoid-version)
- avoid_version=yes
- continue
- ;;
-
- -bindir)
- prev=bindir
- continue
- ;;
-
- -dlopen)
- prev=dlfiles
- continue
- ;;
-
- -dlpreopen)
- prev=dlprefiles
- continue
- ;;
-
- -export-dynamic)
- export_dynamic=yes
- continue
- ;;
-
- -export-symbols | -export-symbols-regex)
- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
- func_fatal_error "more than one -exported-symbols argument is not allowed"
- fi
- if test "X$arg" = "X-export-symbols"; then
- prev=expsyms
- else
- prev=expsyms_regex
- fi
- continue
- ;;
-
- -framework)
- prev=framework
- continue
- ;;
-
- -inst-prefix-dir)
- prev=inst_prefix
- continue
- ;;
-
- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
- # so, if we see these flags be careful not to treat them like -L
- -L[A-Z][A-Z]*:*)
- case $with_gcc/$host in
- no/*-*-irix* | /*-*-irix*)
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- ;;
- esac
- continue
- ;;
-
- -L*)
- func_stripname "-L" '' "$arg"
- if test -z "$func_stripname_result"; then
- if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
- else
- func_fatal_error "need path for \`-L' option"
- fi
- fi
- func_resolve_sysroot "$func_stripname_result"
- dir=$func_resolve_sysroot_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- *)
- absdir=`cd "$dir" && pwd`
- test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
- ;;
- esac
- case "$deplibs " in
- *" -L$dir "* | *" $arg "*)
- # Will only happen for absolute or sysroot arguments
- ;;
- *)
- # Preserve sysroot, but never include relative directories
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
- *) func_append deplibs " -L$dir" ;;
- esac
- func_append lib_search_path " $dir"
- ;;
- esac
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$dir:"*) ;;
- ::) dllsearchpath=$dir;;
- *) func_append dllsearchpath ":$dir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- ::) dllsearchpath=$testbindir;;
- *) func_append dllsearchpath ":$testbindir";;
- esac
- ;;
- esac
- continue
- ;;
-
- -l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
- # These systems don't actually have a C or math library (as such)
- continue
- ;;
- *-*-os2*)
- # These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C and math libraries are in the System framework
- func_append deplibs " System.ltframework"
- continue
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
- ;;
- esac
- elif test "X$arg" = "X-lc_r"; then
- case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc_r directly, use -pthread flag.
- continue
- ;;
- esac
- fi
- func_append deplibs " $arg"
- continue
- ;;
-
- -module)
- module=yes
- continue
- ;;
-
- # Tru64 UNIX uses -model [arg] to determine the layout of C++
- # classes, name mangling, and exception handling.
- # Darwin uses the -arch flag to determine output architecture.
- -model|-arch|-isysroot|--sysroot)
- func_append compiler_flags " $arg"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- prev=xcompiler
- continue
- ;;
-
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
- |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- func_append compiler_flags " $arg"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- case "$new_inherited_linker_flags " in
- *" $arg "*) ;;
- * ) func_append new_inherited_linker_flags " $arg" ;;
- esac
- continue
- ;;
-
- -multi_module)
- single_module="${wl}-multi_module"
- continue
- ;;
-
- -no-fast-install)
- fast_install=no
- continue
- ;;
-
- -no-install)
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
- # The PATH hackery in wrapper scripts is required on Windows
- # and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
- fast_install=no
- ;;
- *) no_install=yes ;;
- esac
- continue
- ;;
-
- -no-undefined)
- allow_undefined=no
- continue
- ;;
-
- -objectlist)
- prev=objectlist
- continue
- ;;
-
- -o) prev=output ;;
-
- -precious-files-regex)
- prev=precious_regex
- continue
- ;;
-
- -release)
- prev=release
- continue
- ;;
-
- -rpath)
- prev=rpath
- continue
- ;;
-
- -R)
- prev=xrpath
- continue
- ;;
-
- -R*)
- func_stripname '-R' '' "$arg"
- dir=$func_stripname_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) ;;
- =*)
- func_stripname '=' '' "$dir"
- dir=$lt_sysroot$func_stripname_result
- ;;
- *)
- func_fatal_error "only absolute run-paths are allowed"
- ;;
- esac
- case "$xrpath " in
- *" $dir "*) ;;
- *) func_append xrpath " $dir" ;;
- esac
- continue
- ;;
-
- -shared)
- # The effects of -shared are defined in a previous loop.
- continue
- ;;
-
- -shrext)
- prev=shrext
- continue
- ;;
-
- -static | -static-libtool-libs)
- # The effects of -static are defined in a previous loop.
- # We used to do the same as -all-static on platforms that
- # didn't have a PIC flag, but the assumption that the effects
- # would be equivalent was wrong. It would break on at least
- # Digital Unix and AIX.
- continue
- ;;
-
- -thread-safe)
- thread_safe=yes
- continue
- ;;
-
- -version-info)
- prev=vinfo
- continue
- ;;
-
- -version-number)
- prev=vinfo
- vinfo_number=yes
- continue
- ;;
-
- -weak)
- prev=weak
- continue
- ;;
-
- -Wc,*)
- func_stripname '-Wc,' '' "$arg"
- args=$func_stripname_result
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- func_quote_for_eval "$flag"
- func_append arg " $func_quote_for_eval_result"
- func_append compiler_flags " $func_quote_for_eval_result"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$arg"
- arg=$func_stripname_result
- ;;
-
- -Wl,*)
- func_stripname '-Wl,' '' "$arg"
- args=$func_stripname_result
- arg=
- save_ifs="$IFS"; IFS=','
- for flag in $args; do
- IFS="$save_ifs"
- func_quote_for_eval "$flag"
- func_append arg " $wl$func_quote_for_eval_result"
- func_append compiler_flags " $wl$func_quote_for_eval_result"
- func_append linker_flags " $func_quote_for_eval_result"
- done
- IFS="$save_ifs"
- func_stripname ' ' '' "$arg"
- arg=$func_stripname_result
- ;;
-
- -Xcompiler)
- prev=xcompiler
- continue
- ;;
-
- -Xlinker)
- prev=xlinker
- continue
- ;;
-
- -XCClinker)
- prev=xcclinker
- continue
- ;;
-
- # -msg_* for osf cc
- -msg_*)
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- ;;
-
- # Flags to be passed through unchanged, with rationale:
- # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
- # -r[0-9][0-9]* specify processor for the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
- # +DA*, +DD* enable 64-bit mode for the HP compiler
- # -q* compiler args for the IBM compiler
- # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
- # -F/path path to uninstalled frameworks, gcc on darwin
- # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
- # @file GCC response files
- # -tp=* Portland pgcc target processor selection
- # --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- func_append compiler_flags " $arg"
- continue
- ;;
-
- # Some other compiler flag.
- -* | +*)
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- ;;
-
- *.$objext)
- # A standard object.
- func_append objs " $arg"
- ;;
-
- *.lo)
- # A libtool-controlled object.
-
- # Check to see that this really is a libtool object.
- if func_lalib_unsafe_p "$arg"; then
- pic_object=
- non_pic_object=
-
- # Read the .lo file
- func_source "$arg"
-
- if test -z "$pic_object" ||
- test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
- fi
-
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- if test "$pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
-
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- func_append dlfiles " $pic_object"
- prev=
- continue
- else
- # If libtool objects are unsupported, then we need to preload.
- prev=dlprefiles
- fi
- fi
-
- # CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
- # Preload the old-style object.
- func_append dlprefiles " $pic_object"
- prev=
- fi
-
- # A PIC object.
- func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
-
- # Non-PIC object.
- if test "$non_pic_object" != none; then
- # Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
-
- # A standard non-PIC object
- func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
- fi
- else
- # If the PIC object exists, use it instead.
- # $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
- func_append non_pic_objects " $non_pic_object"
- fi
- else
- # Only an error if not doing a dry-run.
- if $opt_dry_run; then
- # Extract subdirectory from the argument.
- func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
-
- func_lo2o "$arg"
- pic_object=$xdir$objdir/$func_lo2o_result
- non_pic_object=$xdir$func_lo2o_result
- func_append libobjs " $pic_object"
- func_append non_pic_objects " $non_pic_object"
- else
- func_fatal_error "\`$arg' is not a valid libtool object"
- fi
- fi
- ;;
-
- *.$libext)
- # An archive.
- func_append deplibs " $arg"
- func_append old_deplibs " $arg"
- continue
- ;;
-
- *.la)
- # A libtool-controlled library.
-
- func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
- # This library was specified with -dlopen.
- func_append dlfiles " $func_resolve_sysroot_result"
- prev=
- elif test "$prev" = dlprefiles; then
- # The library was specified with -dlpreopen.
- func_append dlprefiles " $func_resolve_sysroot_result"
- prev=
- else
- func_append deplibs " $func_resolve_sysroot_result"
- fi
- continue
- ;;
-
- # Some other compiler argument.
- *)
- # Unknown arguments in both finalize_command and compile_command need
- # to be aesthetically quoted because they are evaled later.
- func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
- ;;
- esac # arg
-
- # Now actually substitute the argument into the commands.
- if test -n "$arg"; then
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- fi
- done # argument parsing loop
-
- test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
-
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
- eval arg=\"$export_dynamic_flag_spec\"
- func_append compile_command " $arg"
- func_append finalize_command " $arg"
- fi
-
- oldlibs=
- # calculate the name of the file, without its directory
- func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
-
- if test -n "$shlibpath_var"; then
- # get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
- else
- shlib_search_path=
- fi
- eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
- func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
- func_to_tool_file "$output_objdir/"
- tool_output_objdir=$func_to_tool_file_result
- # Create the object directory.
- func_mkdir_p "$output_objdir"
-
- # Determine the type of output
- case $output in
- "")
- func_fatal_help "you must specify an output file"
- ;;
- *.$libext) linkmode=oldlib ;;
- *.lo | *.$objext) linkmode=obj ;;
- *.la) linkmode=lib ;;
- *) linkmode=prog ;; # Anything else should be a program.
- esac
-
- specialdeplibs=
-
- libs=
- # Find all interdependent deplibs by searching for libraries
- # that are linked more than once (e.g. -la -lb -la)
- for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
- case "$libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append libs " $deplib"
- done
-
- if test "$linkmode" = lib; then
- libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
- # Compute libraries that are listed more than once in $predeps
- # $postdeps and mark them as special (i.e., whose duplicates are
- # not to be eliminated).
- pre_post_deps=
- if $opt_duplicate_compiler_generated_deps; then
- for pre_post_dep in $predeps $postdeps; do
- case "$pre_post_deps " in
- *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
- esac
- func_append pre_post_deps " $pre_post_dep"
- done
- fi
- pre_post_deps=
- fi
-
- deplibs=
- newdependency_libs=
- newlib_search_path=
- need_relink=no # whether we're linking any uninstalled libtool libraries
- notinst_deplibs= # not-installed libtool libraries
- notinst_path= # paths that contain not-installed libtool libraries
-
- case $linkmode in
- lib)
- passes="conv dlpreopen link"
- for file in $dlfiles $dlprefiles; do
- case $file in
- *.la) ;;
- *)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
- ;;
- esac
- done
- ;;
- prog)
- compile_deplibs=
- finalize_deplibs=
- alldeplibs=no
- newdlfiles=
- newdlprefiles=
- passes="conv scan dlopen dlpreopen link"
- ;;
- *) passes="conv"
- ;;
- esac
-
- for pass in $passes; do
- # The preopen pass in lib mode reverses $deplibs; put it back here
- # so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
- ## FIXME: Find the place where the list is rebuilt in the wrong
- ## order, and fix it there properly
- tmp_deplibs=
- for deplib in $deplibs; do
- tmp_deplibs="$deplib $tmp_deplibs"
- done
- deplibs="$tmp_deplibs"
- fi
-
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
- deplibs=
- fi
- if test "$linkmode" = prog; then
- case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
- link)
- libs="$deplibs %DEPLIBS%"
- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
- ;;
- esac
- fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
- # Collect and forward deplibs of preopened libtool libs
- for lib in $dlprefiles; do
- # Ignore non-libtool-libs
- dependency_libs=
- func_resolve_sysroot "$lib"
- case $lib in
- *.la) func_source "$func_resolve_sysroot_result" ;;
- esac
-
- # Collect preopened libtool deplibs, except any this library
- # has declared as weak libs
- for deplib in $dependency_libs; do
- func_basename "$deplib"
- deplib_base=$func_basename_result
- case " $weak_libs " in
- *" $deplib_base "*) ;;
- *) func_append deplibs " $deplib" ;;
- esac
- done
- done
- libs="$dlprefiles"
- fi
- if test "$pass" = dlopen; then
- # Collect dlpreopened libraries
- save_deplibs="$deplibs"
- deplibs=
- fi
-
- for deplib in $libs; do
- lib=
- found=no
- case $deplib in
- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
- |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
- case "$new_inherited_linker_flags " in
- *" $deplib "*) ;;
- * ) func_append new_inherited_linker_flags " $deplib" ;;
- esac
- fi
- fi
- continue
- ;;
- -l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
- continue
- fi
- func_stripname '-l' '' "$deplib"
- name=$func_stripname_result
- if test "$linkmode" = lib; then
- searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
- else
- searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
- fi
- for searchdir in $searchdirs; do
- for search_ext in .la $std_shrext .so .a; do
- # Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
- if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
- else
- found=no
- fi
- break 2
- fi
- done
- done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
- # We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $deplib "*)
- if func_lalib_p "$lib"; then
- library_names=
- old_library=
- func_source "$lib"
- for l in $old_library $library_names; do
- ll="$l"
- done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
- func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
- lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- fi
- fi
- ;;
- *) ;;
- esac
- fi
- fi
- ;; # -l
- *.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
- case "$new_inherited_linker_flags " in
- *" $deplib "*) ;;
- * ) func_append new_inherited_linker_flags " $deplib" ;;
- esac
- fi
- fi
- continue
- ;;
- -L*)
- case $linkmode in
- lib)
- deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
- newdependency_libs="$deplib $newdependency_libs"
- func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- prog)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- if test "$pass" = scan; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- *)
- func_warning "\`-L' is ignored for archives/objects"
- ;;
- esac # linkmode
- continue
- ;; # -L
- -R*)
- if test "$pass" = link; then
- func_stripname '-R' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- dir=$func_resolve_sysroot_result
- # Make sure the xrpath contains only unique directories.
- case "$xrpath " in
- *" $dir "*) ;;
- *) func_append xrpath " $dir" ;;
- esac
- fi
- deplibs="$deplib $deplibs"
- continue
- ;;
- *.la)
- func_resolve_sysroot "$deplib"
- lib=$func_resolve_sysroot_result
- ;;
- *.$libext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
- case $linkmode in
- lib)
- # Linking convenience modules into shared libraries is allowed,
- # but linking other static libraries is non-portable.
- case " $dlpreconveniencelibs " in
- *" $deplib "*) ;;
- *)
- valid_a_lib=no
- case $deplibs_check_method in
- match_pattern*)
- set dummy $deplibs_check_method; shift
- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
- | $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
- fi
- ;;
- pass_all)
- valid_a_lib=yes
- ;;
- esac
- if test "$valid_a_lib" != yes; then
- echo
- $ECHO "*** Warning: Trying to link with static lib archive $deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because the file extensions .$libext of this argument makes me believe"
- echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
- fi
- ;;
- esac
- continue
- ;;
- prog)
- if test "$pass" != link; then
- deplibs="$deplib $deplibs"
- else
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- fi
- continue
- ;;
- esac # linkmode
- ;; # *.$libext
- *.lo | *.$objext)
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
- # If there is no dlopen support or we're linking statically,
- # we need to preload.
- func_append newdlprefiles " $deplib"
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- func_append newdlfiles " $deplib"
- fi
- fi
- continue
- ;;
- %DEPLIBS%)
- alldeplibs=yes
- continue
- ;;
- esac # case $deplib
-
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
-
- # Check to see that this really is a libtool archive.
- func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
-
- func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
-
- dlname=
- dlopen=
- dlpreopen=
- libdir=
- library_names=
- old_library=
- inherited_linker_flags=
- # If the library was installed with an old release of libtool,
- # it will not redefine variables installed, or shouldnotlink
- installed=yes
- shouldnotlink=no
- avoidtemprpath=
-
-
- # Read the .la file
- func_source "$lib"
-
- # Convert "-framework foo" to "foo.ltframework"
- if test -n "$inherited_linker_flags"; then
- tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
- for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
- case " $new_inherited_linker_flags " in
- *" $tmp_inherited_linker_flag "*) ;;
- *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
- esac
- done
- fi
- dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && func_append dlfiles " $dlopen"
- test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
- fi
-
- if test "$pass" = conv; then
- # Only check for convenience libraries
- deplibs="$lib $deplibs"
- if test -z "$libdir"; then
- if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
- fi
- # It is a libtool convenience library, so add in its objects.
- func_append convenience " $ladir/$objdir/$old_library"
- func_append old_convenience " $ladir/$objdir/$old_library"
- tmp_libs=
- for deplib in $dependency_libs; do
- deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append tmp_libs " $deplib"
- done
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
- fi
- continue
- fi # $pass = conv
-
-
- # Get the name of the library we link against.
- linklib=
- if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
- linklib=$old_library
- else
- for l in $old_library $library_names; do
- linklib="$l"
- done
- fi
- if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
- fi
-
- # This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
- if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
- # If there is no dlname, no dlopen support or we're linking
- # statically, we need to preload. We also need to preload any
- # dependent libraries so libltdl's deplib preloader doesn't
- # bomb out in the load deplibs phase.
- func_append dlprefiles " $lib $dependency_libs"
- else
- func_append newdlfiles " $lib"
- fi
- continue
- fi # $pass = dlopen
-
- # We need an absolute path.
- case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
- *)
- abs_ladir=`cd "$ladir" && pwd`
- if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
- func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
- fi
- ;;
- esac
- func_basename "$lib"
- laname="$func_basename_result"
-
- # Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
- if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
- else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
- fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
- else
- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
- # Remove this search path later
- func_append notinst_path " $abs_ladir"
- else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- func_append notinst_path " $abs_ladir"
- fi
- fi # $installed = yes
- func_stripname 'lib' '.la' "$laname"
- name=$func_stripname_result
-
- # This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
- fi
- case "$host" in
- # special handling for platforms with PE-DLLs.
- *cygwin* | *mingw* | *cegcc* )
- # Linker will automatically link against shared library if both
- # static and shared are present. Therefore, ensure we extract
- # symbols from the import library if a shared library is present
- # (otherwise, the dlopen module name will be incorrect). We do
- # this by putting the import library name into $newdlprefiles.
- # We recover the dlopen module name by 'saving' the la file
- # name in a special purpose variable, and (later) extracting the
- # dlname from the la file.
- if test -n "$dlname"; then
- func_tr_sh "$dir/$linklib"
- eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
- func_append newdlprefiles " $dir/$linklib"
- else
- func_append newdlprefiles " $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- func_append dlpreconveniencelibs " $dir/$old_library"
- fi
- ;;
- * )
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- func_append newdlprefiles " $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- func_append dlpreconveniencelibs " $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- func_append newdlprefiles " $dir/$dlname"
- else
- func_append newdlprefiles " $dir/$linklib"
- fi
- ;;
- esac
- fi # $pass = dlpreopen
-
- if test -z "$libdir"; then
- # Link the convenience library
- if test "$linkmode" = lib; then
- deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$dir/$old_library $compile_deplibs"
- finalize_deplibs="$dir/$old_library $finalize_deplibs"
- else
- deplibs="$lib $deplibs" # used for prog,scan pass
- fi
- continue
- fi
-
-
- if test "$linkmode" = prog && test "$pass" != link; then
- func_append newlib_search_path " $ladir"
- deplibs="$lib $deplibs"
-
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
- fi
-
- tmp_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- -L*) func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
- ;;
- esac
- # Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
- deplibs="$deplib $deplibs"
- else
- # Need to hardcode shared library paths
- # or/and link against static libraries
- newdependency_libs="$deplib $newdependency_libs"
- fi
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
- esac
- fi
- func_append tmp_libs " $deplib"
- done # for deplib
- continue
- fi # $linkmode = prog...
-
- if test "$linkmode,$pass" = "prog,link"; then
- if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
- test -z "$old_library"; }; then
- # We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
- # Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
- *"$absdir:"*) ;;
- *) func_append temp_rpath "$absdir:" ;;
- esac
- fi
-
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) func_append compile_rpath " $absdir" ;;
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- ;;
- esac
- fi # $linkmode,$pass = prog,link...
-
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
- test -n "$library_names"; }; }; then
- # We only need to search for static libraries
- continue
- fi
- fi
-
- link_static=no # Whether the deplib will be linked statically
- use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
- use_static_libs=no
- fi
- if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
- case $host in
- *cygwin* | *mingw* | *cegcc*)
- # No point in relinking DLLs because paths are not encoded
- func_append notinst_deplibs " $lib"
- need_relink=no
- ;;
- *)
- if test "$installed" = no; then
- func_append notinst_deplibs " $lib"
- need_relink=yes
- fi
- ;;
- esac
- # This is a shared library
-
- # Warn about portability, can't link against -module's on some
- # systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
- for dlpremoduletest in $dlprefiles; do
- if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
- break
- fi
- done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
- echo
- if test "$linkmode" = prog; then
- $ECHO "*** Warning: Linking the executable $output against the loadable module"
- else
- $ECHO "*** Warning: Linking the shared library $output against the loadable module"
- fi
- $ECHO "*** $linklib is not portable!"
- fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
- # Hardcode the library path.
- # Skip directories that are in the system default run-time
- # search path.
- case " $sys_lib_dlsearch_path " in
- *" $absdir "*) ;;
- *)
- case "$compile_rpath " in
- *" $absdir "*) ;;
- *) func_append compile_rpath " $absdir" ;;
- esac
- ;;
- esac
- case " $sys_lib_dlsearch_path " in
- *" $libdir "*) ;;
- *)
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- ;;
- esac
- fi
-
- if test -n "$old_archive_from_expsyms_cmds"; then
- # figure out the soname
- set dummy $library_names
- shift
- realname="$1"
- shift
- libname=`eval "\\$ECHO \"$libname_spec\""`
- # use dlname if we got it. it's perfectly good, no?
- if test -n "$dlname"; then
- soname="$dlname"
- elif test -n "$soname_spec"; then
- # bleh windows
- case $host in
- *cygwin* | mingw* | *cegcc*)
- func_arith $current - $age
- major=$func_arith_result
- versuffix="-$major"
- ;;
- esac
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
-
- # Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
- func_basename "$soroot"
- soname="$func_basename_result"
- func_stripname 'lib' '.dll' "$soname"
- newlib=libimp-$func_stripname_result.a
-
- # If the library has no export list, then create one now
- if test -f "$output_objdir/$soname-def"; then :
- else
- func_verbose "extracting exported symbol list from \`$soname'"
- func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
- fi
-
- # Create $newlib
- if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
- func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
- fi
- # make sure the library variables are pointing to the new library
- dir=$output_objdir
- linklib=$newlib
- fi # test -n "$old_archive_from_expsyms_cmds"
-
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
- add_shlibpath=
- add_dir=
- add=
- lib_linked=yes
- case $hardcode_action in
- immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
- case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
- *-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
- # link against it, someone is ignoring the earlier warnings
- if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
- if test "X$dlopenmodule" != "X$lib"; then
- $ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
- echo
- echo "*** And there doesn't seem to be a static archive available"
- echo "*** The link will probably fail, sorry"
- else
- add="$dir/$old_library"
- fi
- elif test -n "$old_library"; then
- add="$dir/$old_library"
- fi
- fi
- esac
- elif test "$hardcode_minus_L" = no; then
- case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
- esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- func_append add_dir " -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
- else
- lib_linked=no
- fi
- ;;
- *) lib_linked=no ;;
- esac
-
- if test "$lib_linked" != yes; then
- func_fatal_configuration "unsupported hardcode properties"
- fi
-
- if test -n "$add_shlibpath"; then
- case :$compile_shlibpath: in
- *":$add_shlibpath:"*) ;;
- *) func_append compile_shlibpath "$add_shlibpath:" ;;
- esac
- fi
- if test "$linkmode" = prog; then
- test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
- test -n "$add" && compile_deplibs="$add $compile_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) func_append finalize_shlibpath "$libdir:" ;;
- esac
- fi
- fi
- fi
-
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
- add_shlibpath=
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) func_append finalize_shlibpath "$libdir:" ;;
- esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
- else
- add="$libdir/$linklib"
- fi
- else
- # We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
- # Try looking first in the location we're being installed to.
- if test -n "$inst_prefix_dir"; then
- case $libdir in
- [\\/]*)
- func_append add_dir " -L$inst_prefix_dir$libdir"
- ;;
- esac
- fi
- add="-l$name"
- fi
-
- if test "$linkmode" = prog; then
- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
- test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
- else
- test -n "$add_dir" && deplibs="$add_dir $deplibs"
- test -n "$add" && deplibs="$add $deplibs"
- fi
- fi
- elif test "$linkmode" = prog; then
- # Here we assume that one of hardcode_direct or hardcode_minus_L
- # is not unsupported. This is valid on all known static and
- # shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
- compile_deplibs="$dir/$linklib $compile_deplibs"
- finalize_deplibs="$dir/$linklib $finalize_deplibs"
- else
- compile_deplibs="-l$name -L$dir $compile_deplibs"
- finalize_deplibs="-l$name -L$dir $finalize_deplibs"
- fi
- elif test "$build_libtool_libs" = yes; then
- # Not a shared library
- if test "$deplibs_check_method" != pass_all; then
- # We're trying link a shared library against a static one
- # but the system doesn't support it.
-
- # Just print a warning and add the library to dependency_libs so
- # that the program can be linked against the static library.
- echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
- echo "*** But as you try to build a module library, libtool will still create "
- echo "*** a static module, that should work as long as the dlopening application"
- echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
- if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- else
- deplibs="$dir/$old_library $deplibs"
- link_static=yes
- fi
- fi # link shared/static library?
-
- if test "$linkmode" = lib; then
- if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
- # Extract -R from dependency_libs
- temp_deplibs=
- for libdir in $dependency_libs; do
- case $libdir in
- -R*) func_stripname '-R' '' "$libdir"
- temp_xrpath=$func_stripname_result
- case " $xrpath " in
- *" $temp_xrpath "*) ;;
- *) func_append xrpath " $temp_xrpath";;
- esac;;
- *) func_append temp_deplibs " $libdir";;
- esac
- done
- dependency_libs="$temp_deplibs"
- fi
-
- func_append newlib_search_path " $absdir"
- # Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
- # ... and its dependency_libs
- tmp_libs=
- for deplib in $dependency_libs; do
- newdependency_libs="$deplib $newdependency_libs"
- case $deplib in
- -L*) func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result";;
- *) func_resolve_sysroot "$deplib" ;;
- esac
- if $opt_preserve_dup_deps ; then
- case "$tmp_libs " in
- *" $func_resolve_sysroot_result "*)
- func_append specialdeplibs " $func_resolve_sysroot_result" ;;
- esac
- fi
- func_append tmp_libs " $func_resolve_sysroot_result"
- done
-
- if test "$link_all_deplibs" != no; then
- # Add the search paths of all dependency libraries
- for deplib in $dependency_libs; do
- path=
- case $deplib in
- -L*) path="$deplib" ;;
- *.la)
- func_resolve_sysroot "$deplib"
- deplib=$func_resolve_sysroot_result
- func_dirname "$deplib" "" "."
- dir=$func_dirname_result
- # We need an absolute path.
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
- *)
- absdir=`cd "$dir" && pwd`
- if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
- fi
- ;;
- esac
- if $GREP "^installed=no" $deplib > /dev/null; then
- case $host in
- *-*-darwin*)
- depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
- depdepl=$tmp
- done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
- if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
- fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
- path=
- fi
- fi
- ;;
- *)
- path="-L$absdir/$objdir"
- ;;
- esac
- else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
- test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
- test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
-
- path="-L$absdir"
- fi
- ;;
- esac
- case " $deplibs " in
- *" $path "*) ;;
- *) deplibs="$path $deplibs" ;;
- esac
- done
- fi # link_all_deplibs != no
- fi # linkmode = lib
- done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
- compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
- finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
- else
- compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- fi
- fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
- # Link the dlpreopened libraries before other libraries
- for deplib in $save_deplibs; do
- deplibs="$deplib $deplibs"
- done
- fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
- # Make sure lib_search_path contains only unique directories.
- lib_search_path=
- for dir in $newlib_search_path; do
- case "$lib_search_path " in
- *" $dir "*) ;;
- *) func_append lib_search_path " $dir" ;;
- esac
- done
- newlib_search_path=
- fi
-
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
- vars="compile_deplibs finalize_deplibs"
- fi
- for var in $vars dependency_libs; do
- # Add libraries to $var in reverse order
- eval tmp_libs=\"\$$var\"
- new_libs=
- for deplib in $tmp_libs; do
- # FIXME: Pedantically, this is the right thing to do, so
- # that some nasty dependency loop isn't accidentally
- # broken:
- #new_libs="$deplib $new_libs"
- # Pragmatically, this seems to cause very few problems in
- # practice:
- case $deplib in
- -L*) new_libs="$deplib $new_libs" ;;
- -R*) ;;
- *)
- # And here is the reason: when a library appears more
- # than once as an explicit dependence of a library, or
- # is implicitly linked in more than once by the
- # compiler, it is considered special, and multiple
- # occurrences thereof are not removed. Compare this
- # with having the same library being listed as a
- # dependency of multiple other libraries: in this case,
- # we know (pedantically, we assume) the library does not
- # need to be listed more than once, so we keep only the
- # last copy. This is not always right, but it is rare
- # enough that we require users that really mean to play
- # such unportable linking tricks to link the library
- # using -Wl,-lname, so that libtool does not consider it
- # for duplicate removal.
- case " $specialdeplibs " in
- *" $deplib "*) new_libs="$deplib $new_libs" ;;
- *)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) new_libs="$deplib $new_libs" ;;
- esac
- ;;
- esac
- ;;
- esac
- done
- tmp_libs=
- for deplib in $new_libs; do
- case $deplib in
- -L*)
- case " $tmp_libs " in
- *" $deplib "*) ;;
- *) func_append tmp_libs " $deplib" ;;
- esac
- ;;
- *) func_append tmp_libs " $deplib" ;;
- esac
- done
- eval $var=\"$tmp_libs\"
- done # for var
- fi
- # Last step: remove runtime libs from dependency_libs
- # (they stay in deplibs)
- tmp_libs=
- for i in $dependency_libs ; do
- case " $predeps $postdeps $compiler_lib_search_path " in
- *" $i "*)
- i=""
- ;;
- esac
- if test -n "$i" ; then
- func_append tmp_libs " $i"
- fi
- done
- dependency_libs=$tmp_libs
- done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
- fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
- fi
-
- case $linkmode in
- oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
- fi
-
- case " $deplibs" in
- *\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
- esac
-
- test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
-
- test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
-
- test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
-
- test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
-
- # Now set the variables for building old libraries.
- build_libtool_libs=no
- oldlibs="$output"
- func_append objs "$old_deplibs"
- ;;
-
- lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
- case $outputname in
- lib*)
- func_stripname 'lib' '.la' "$outputname"
- name=$func_stripname_result
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- ;;
- *)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
-
- if test "$need_lib_prefix" != no; then
- # Add the "lib" prefix for modules if required
- func_stripname '' '.la' "$outputname"
- name=$func_stripname_result
- eval shared_ext=\"$shrext_cmds\"
- eval libname=\"$libname_spec\"
- else
- func_stripname '' '.la' "$outputname"
- libname=$func_stripname_result
- fi
- ;;
- esac
-
- if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
- $ECHO "*** objects $objs is not portable!"
- func_append libobjs " $objs"
- fi
- fi
-
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
-
- set dummy $rpath
- shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
-
- install_libdir="$1"
-
- oldlibs=
- if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
- # Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
- # convenience libraries should have the same extension an
- # archive normally would.
- oldlibs="$output_objdir/$libname.$libext $oldlibs"
- build_libtool_libs=convenience
- build_old_libs=yes
- fi
-
- test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
- else
-
- # Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
- set dummy $vinfo 0 0 0
- shift
- IFS="$save_ifs"
-
- test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
-
- # convert absolute version numbers to libtool ages
- # this retains compatibility with .la files and attempts
- # to make the code below a bit more comprehensible
-
- case $vinfo_number in
- yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
- #
- # There are really only two kinds -- those that
- # use the current revision as the major version
- # and those that subtract age and use age as
- # a minor version. But, then there is irix
- # which has an extra 1 added just for fun
- #
- case $version_type in
- # correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
- func_arith $number_major + $number_minor
- current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
- ;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
- ;;
- irix|nonstopux)
- func_arith $number_major + $number_minor
- current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
- lt_irix_increment=no
- ;;
- *)
- func_fatal_configuration "$modename: unknown library version type \`$version_type'"
- ;;
- esac
- ;;
- no)
- current="$1"
- revision="$2"
- age="$3"
- ;;
- esac
-
- # Check that each of the things are valid numbers.
- case $current in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
- ;;
- esac
-
- case $revision in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
- ;;
- esac
-
- case $age in
- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
- *)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
- ;;
- esac
-
- if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
- fi
-
- # Calculate the version variables.
- major=
- versuffix=
- verstring=
- case $version_type in
- none) ;;
-
- darwin)
- # Like Linux, but with the current version available in
- # verstring for coding it into the library header
- func_arith $current - $age
- major=.$func_arith_result
- versuffix="$major.$age.$revision"
- # Darwin ld doesn't like 0 for these options...
- func_arith $current + 1
- minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
- ;;
-
- freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
- ;;
-
- freebsd-elf)
- major=".$current"
- versuffix=".$current"
- ;;
-
- irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
- func_arith $current - $age
- else
- func_arith $current - $age + 1
- fi
- major=$func_arith_result
-
- case $version_type in
- nonstopux) verstring_prefix=nonstopux ;;
- *) verstring_prefix=sgi ;;
- esac
- verstring="$verstring_prefix$major.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$revision
- while test "$loop" -ne 0; do
- func_arith $revision - $loop
- iface=$func_arith_result
- func_arith $loop - 1
- loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
- done
-
- # Before this point, $major must not contain `.'.
- major=.$major
- versuffix="$major.$revision"
- ;;
-
- linux) # correct to gnu/linux during the next big refactor
- func_arith $current - $age
- major=.$func_arith_result
- versuffix="$major.$age.$revision"
- ;;
-
- osf)
- func_arith $current - $age
- major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
-
- # Add in all the interfaces that we are compatible with.
- loop=$age
- while test "$loop" -ne 0; do
- func_arith $current - $loop
- iface=$func_arith_result
- func_arith $loop - 1
- loop=$func_arith_result
- verstring="$verstring:${iface}.0"
- done
-
- # Make executables depend on our current version.
- func_append verstring ":${current}.0"
- ;;
-
- qnx)
- major=".$current"
- versuffix=".$current"
- ;;
-
- sunos)
- major=".$current"
- versuffix=".$current.$revision"
- ;;
-
- windows)
- # Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
- func_arith $current - $age
- major=$func_arith_result
- versuffix="-$major"
- ;;
-
- *)
- func_fatal_configuration "unknown library version type \`$version_type'"
- ;;
- esac
-
- # Clear the version info if we defaulted, and they specified a release.
- if test -z "$vinfo" && test -n "$release"; then
- major=
- case $version_type in
- darwin)
- # we can't check for "0.0" in archive_cmds due to quoting
- # problems, so we reset it completely
- verstring=
- ;;
- *)
- verstring="0.0"
- ;;
- esac
- if test "$need_version" = no; then
- versuffix=
- else
- versuffix=".0.0"
- fi
- fi
-
- # Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
- major=
- versuffix=
- verstring=""
- fi
-
- # Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
- fi
- else
- # Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
- fi
-
- fi
-
- func_generate_dlsyms "$libname" "$libname" "yes"
- func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
-
- if test "$opt_mode" != relink; then
- # Remove our outputs, but don't remove object files since they
- # may have been created when compiling PIC objects.
- removelist=
- tempremovelist=`$ECHO "$output_objdir/*"`
- for p in $tempremovelist; do
- case $p in
- *.$objext | *.gcno)
- ;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
- if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
- then
- continue
- fi
- fi
- func_append removelist " $p"
- ;;
- *) ;;
- esac
- done
- test -n "$removelist" && \
- func_show_eval "${RM}r \$removelist"
- fi
-
- # Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- func_append oldlibs " $output_objdir/$libname.$libext"
-
- # Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
- fi
-
- # Eliminate all temporary directories.
- #for path in $notinst_path; do
- # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
- # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
- # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
- #done
-
- if test -n "$xrpath"; then
- # If the user specified any rpath flags, then add them.
- temp_xrpath=
- for libdir in $xrpath; do
- func_replace_sysroot "$libdir"
- func_append temp_xrpath " -R$func_replace_sysroot_result"
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
- dependency_libs="$temp_xrpath $dependency_libs"
- fi
- fi
-
- # Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
- dlfiles=
- for lib in $old_dlfiles; do
- case " $dlprefiles $dlfiles " in
- *" $lib "*) ;;
- *) func_append dlfiles " $lib" ;;
- esac
- done
-
- # Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
- dlprefiles=
- for lib in $old_dlprefiles; do
- case "$dlprefiles " in
- *" $lib "*) ;;
- *) func_append dlprefiles " $lib" ;;
- esac
- done
-
- if test "$build_libtool_libs" = yes; then
- if test -n "$rpath"; then
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
- # these systems don't actually have a c library (as such)!
- ;;
- *-*-rhapsody* | *-*-darwin1.[012])
- # Rhapsody C library is in the System framework
- func_append deplibs " System.ltframework"
- ;;
- *-*-netbsd*)
- # Don't link with libc until the a.out ld.so is fixed.
- ;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
- # Do not include libc due to us having libc/libc_r.
- ;;
- *-*-sco3.2v5* | *-*-sco5v6*)
- # Causes problems with __ctype
- ;;
- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
- # Compiler inserts libc in the correct place for threads to work
- ;;
- *)
- # Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
- func_append deplibs " -lc"
- fi
- ;;
- esac
- fi
-
- # Transform deplibs into only deplibs that can be linked in shared.
- name_save=$name
- libname_save=$libname
- release_save=$release
- versuffix_save=$versuffix
- major_save=$major
- # I'm not sure if I'm treating the release correctly. I think
- # release should show up in the -l (ie -lgmp5) so we don't want to
- # add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
- newdeplibs=
- droppeddeps=no
- case $deplibs_check_method in
- pass_all)
- # Don't check for shared/static. Everything works.
- # This might be a little naive. We might want to check
- # whether the library exists or not. But this is on
- # osf3 & osf4 and I'm not really sure... Just
- # implementing what was already the behavior.
- newdeplibs=$deplibs
- ;;
- test_compile)
- # This code stresses the "libraries are programs" paradigm to its
- # limits. Maybe even breaks it. We compile a program, linking it
- # against the deplibs as a proxy for the library. Then we can check
- # whether they linked in statically or dynamically with ldd.
- $opt_dry_run || $RM conftest.c
- cat > conftest.c <<EOF
- int main() { return 0; }
-EOF
- $opt_dry_run || $RM conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
- ldd_output=`ldd conftest`
- for i in $deplibs; do
- case $i in
- -l*)
- func_stripname -l '' "$i"
- name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- func_append newdeplibs " $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
- set dummy $deplib_matches; shift
- deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- func_append newdeplibs " $i"
- else
- droppeddeps=yes
- echo
- $ECHO "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which I believe you do not have"
- echo "*** because a test_compile did reveal that the linker did not use it for"
- echo "*** its dynamic dependency list that programs get resolved with at runtime."
- fi
- fi
- ;;
- *)
- func_append newdeplibs " $i"
- ;;
- esac
- done
- else
- # Error occurred in the first compile. Let's try to salvage
- # the situation: Compile a separate program for each library.
- for i in $deplibs; do
- case $i in
- -l*)
- func_stripname -l '' "$i"
- name=$func_stripname_result
- $opt_dry_run || $RM conftest
- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
- ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $i "*)
- func_append newdeplibs " $i"
- i=""
- ;;
- esac
- fi
- if test -n "$i" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
- set dummy $deplib_matches; shift
- deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- func_append newdeplibs " $i"
- else
- droppeddeps=yes
- echo
- $ECHO "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because a test_compile did reveal that the linker did not use this one"
- echo "*** as a dynamic dependency that programs can get resolved with at runtime."
- fi
- fi
- else
- droppeddeps=yes
- echo
- $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
- echo "*** make it link in! You will probably need to install it or some"
- echo "*** library that it depends on before this library will be fully"
- echo "*** functional. Installing it before continuing would be even better."
- fi
- ;;
- *)
- func_append newdeplibs " $i"
- ;;
- esac
- done
- fi
- ;;
- file_magic*)
- set dummy $deplibs_check_method; shift
- file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- for a_deplib in $deplibs; do
- case $a_deplib in
- -l*)
- func_stripname -l '' "$a_deplib"
- name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- if test -n "$file_magic_glob"; then
- libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
- else
- libnameglob=$libname
- fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
- shopt -s nocaseglob
- potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
- $nocaseglob
- else
- potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
- fi
- for potent_lib in $potential_libs; do
- # Follow soft links.
- if ls -lLd "$potent_lib" 2>/dev/null |
- $GREP " -> " >/dev/null; then
- continue
- fi
- # The statement above tries to avoid entering an
- # endless loop below, in case of cyclic links.
- # We might still enter an endless loop, since a link
- # loop can be closed while we follow links,
- # but so what?
- potlib="$potent_lib"
- while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
- case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
- esac
- done
- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
- $SED -e 10q |
- $EGREP "$file_magic_regex" > /dev/null; then
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
- $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
- else
- $ECHO "*** with $libname and none of the candidates passed a file format test"
- $ECHO "*** using a file magic. Last file checked: $potlib"
- fi
- fi
- ;;
- *)
- # Add a -L argument.
- func_append newdeplibs " $a_deplib"
- ;;
- esac
- done # Gone through all deplibs.
- ;;
- match_pattern*)
- set dummy $deplibs_check_method; shift
- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- for a_deplib in $deplibs; do
- case $a_deplib in
- -l*)
- func_stripname -l '' "$a_deplib"
- name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- case " $predeps $postdeps " in
- *" $a_deplib "*)
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- ;;
- esac
- fi
- if test -n "$a_deplib" ; then
- libname=`eval "\\$ECHO \"$libname_spec\""`
- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
- for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
- $EGREP "$match_pattern_regex" > /dev/null; then
- func_append newdeplibs " $a_deplib"
- a_deplib=""
- break 2
- fi
- done
- done
- fi
- if test -n "$a_deplib" ; then
- droppeddeps=yes
- echo
- $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
- $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
- else
- $ECHO "*** with $libname and none of the candidates passed a file format test"
- $ECHO "*** using a regex pattern. Last file checked: $potlib"
- fi
- fi
- ;;
- *)
- # Add a -L argument.
- func_append newdeplibs " $a_deplib"
- ;;
- esac
- done # Gone through all deplibs.
- ;;
- none | unknown | *)
- newdeplibs=""
- tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
- # can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
- done
- fi
- case $tmp_deplibs in
- *[!\ \ ]*)
- echo
- if test "X$deplibs_check_method" = "Xnone"; then
- echo "*** Warning: inter-library dependencies are not supported in this platform."
- else
- echo "*** Warning: inter-library dependencies are not known to be supported."
- fi
- echo "*** All declared inter-library dependencies are being dropped."
- droppeddeps=yes
- ;;
- esac
- ;;
- esac
- versuffix=$versuffix_save
- major=$major_save
- release=$release_save
- libname=$libname_save
- name=$name_save
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library with the System framework
- newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
- ;;
- esac
-
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
- echo
- echo "*** Warning: libtool could not satisfy all declared inter-library"
- $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
- echo "*** a static module, that should work as long as the dlopening"
- echo "*** application is linked with the -dlopen flag."
- if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
- fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- else
- echo "*** The inter-library dependencies that have been dropped here will be"
- echo "*** automatically added whenever a program is linked with this library"
- echo "*** or is declared to -dlopen it."
-
- if test "$allow_undefined" = no; then
- echo
- echo "*** Since this library must not contain undefined symbols,"
- echo "*** because either the platform does not support them or"
- echo "*** it was explicitly requested with -no-undefined,"
- echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
- build_libtool_libs=module
- build_old_libs=yes
- else
- build_libtool_libs=no
- fi
- fi
- fi
- fi
- # Done checking deplibs!
- deplibs=$newdeplibs
- fi
- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
- case $host in
- *-*-darwin*)
- newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- ;;
- esac
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $deplibs " in
- *" -L$path/$objdir "*)
- func_append new_libs " -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) func_append new_libs " $deplib" ;;
- esac
- ;;
- *) func_append new_libs " $deplib" ;;
- esac
- done
- deplibs="$new_libs"
-
- # All the library-specific variables (install_libdir is set above).
- library_names=
- old_library=
- dlname=
-
- # Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
- # FIXME: should test the right _cmds variable.
- case $archive_cmds in
- *\$LD\ *) wl= ;;
- esac
- if test "$hardcode_into_libs" = yes; then
- # Hardcode the library paths
- hardcode_libdirs=
- dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
- for libdir in $rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- func_replace_sysroot "$libdir"
- libdir=$func_replace_sysroot_result
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- func_append dep_rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) func_append perm_rpath " $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
- fi
- if test -n "$runpath_var" && test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- func_append rpath "$dir:"
- done
- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
- fi
- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
- fi
-
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
- if test -n "$shlibpath"; then
- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
- fi
-
- # Get the real and link names of the library.
- eval shared_ext=\"$shrext_cmds\"
- eval library_names=\"$library_names_spec\"
- set dummy $library_names
- shift
- realname="$1"
- shift
-
- if test -n "$soname_spec"; then
- eval soname=\"$soname_spec\"
- else
- soname="$realname"
- fi
- if test -z "$dlname"; then
- dlname=$soname
- fi
-
- lib="$output_objdir/$realname"
- linknames=
- for link
- do
- func_append linknames " $link"
- done
-
- # Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
- test "X$libobjs" = "X " && libobjs=
-
- delfiles=
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
- func_append delfiles " $export_symbols"
- fi
-
- orig_export_symbols=
- case $host_os in
- cygwin* | mingw* | cegcc*)
- if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
- # exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
- # and it's NOT already a .def file. Must figure out
- # which of the given symbols are data symbols and tag
- # them as such. So, trigger use of export_symbols_cmds.
- # export_symbols gets reassigned inside the "prepare
- # the list of exported symbols" if statement, so the
- # include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
- export_symbols=
- always_export_symbols=yes
- fi
- fi
- ;;
- esac
-
- # Prepare the list of exported symbols
- if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $opt_dry_run || $RM $export_symbols
- cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
- for cmd1 in $cmds; do
- IFS="$save_ifs"
- # Take the normal branch if the nm_file_list_spec branch
- # doesn't work or if tool conversion is not needed.
- case $nm_file_list_spec~$to_tool_file_cmd in
- *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
- try_normal_branch=yes
- eval cmd=\"$cmd1\"
- func_len " $cmd"
- len=$func_len_result
- ;;
- *)
- try_normal_branch=no
- ;;
- esac
- if test "$try_normal_branch" = yes \
- && { test "$len" -lt "$max_cmd_len" \
- || test "$max_cmd_len" -le -1; }
- then
- func_show_eval "$cmd" 'exit $?'
- skipped_export=false
- elif test -n "$nm_file_list_spec"; then
- func_basename "$output"
- output_la=$func_basename_result
- save_libobjs=$libobjs
- save_output=$output
- output=${output_objdir}/${output_la}.nm
- func_to_tool_file "$output"
- libobjs=$nm_file_list_spec$func_to_tool_file_result
- func_append delfiles " $output"
- func_verbose "creating $NM input file list: $output"
- for obj in $save_libobjs; do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result"
- done > "$output"
- eval cmd=\"$cmd1\"
- func_show_eval "$cmd" 'exit $?'
- output=$save_output
- libobjs=$save_libobjs
- skipped_export=false
- else
- # The command line is too long to execute in one step.
- func_verbose "using reloadable object file for export list..."
- skipped_export=:
- # Break out early, otherwise skipped_export may be
- # set to false by a later but shorter cmd.
- break
- fi
- done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
- fi
- fi
- fi
-
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
- fi
-
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
- # The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
- # FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
- # though. Also, the filter scales superlinearly with the number of
- # global variables. join(1) would be nice here, but unfortunately
- # isn't a blessed tool.
- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- func_append delfiles " $export_symbols $output_objdir/$libname.filter"
- export_symbols=$output_objdir/$libname.def
- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
- fi
-
- tmp_deplibs=
- for test_deplib in $deplibs; do
- case " $convenience " in
- *" $test_deplib "*) ;;
- *)
- func_append tmp_deplibs " $test_deplib"
- ;;
- esac
- done
- deplibs="$tmp_deplibs"
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
- test -z "$libobjs"; then
- # extract the archives, so we have objects to list.
- # TODO: could optimize this to just extract one archive.
- whole_archive_flag_spec=
- fi
- if test -n "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- test "X$libobjs" = "X " && libobjs=
- else
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $convenience
- func_append libobjs " $func_extract_archives_result"
- test "X$libobjs" = "X " && libobjs=
- fi
- fi
-
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
- eval flag=\"$thread_safe_flag_spec\"
- func_append linker_flags " $flag"
- fi
-
- # Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
- fi
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval test_cmds=\"$module_expsym_cmds\"
- cmds=$module_expsym_cmds
- else
- eval test_cmds=\"$module_cmds\"
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval test_cmds=\"$archive_expsym_cmds\"
- cmds=$archive_expsym_cmds
- else
- eval test_cmds=\"$archive_cmds\"
- cmds=$archive_cmds
- fi
- fi
-
- if test "X$skipped_export" != "X:" &&
- func_len " $test_cmds" &&
- len=$func_len_result &&
- test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
- else
- # The command line is too long to link in one step, link piecewise
- # or, if using GNU ld and skipped_export is not :, use a linker
- # script.
-
- # Save the value of $output and $libobjs because we want to
- # use them later. If we have whole_archive_flag_spec, we
- # want to use save_libobjs as it was before
- # whole_archive_flag_spec was expanded, because we can't
- # assume the linker understands whole_archive_flag_spec.
- # This may have to be revisited, in case too many
- # convenience libraries get linked in and end up exceeding
- # the spec.
- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
- save_libobjs=$libobjs
- fi
- save_output=$output
- func_basename "$output"
- output_la=$func_basename_result
-
- # Clear the reloadable object creation command queue and
- # initialize k to one.
- test_cmds=
- concat_cmds=
- objlist=
- last_robj=
- k=1
-
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
- func_verbose "creating GNU ld script: $output"
- echo 'INPUT (' > $output
- for obj in $save_libobjs
- do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result" >> $output
- done
- echo ')' >> $output
- func_append delfiles " $output"
- func_to_tool_file "$output"
- output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
- func_verbose "creating linker input file list: $output"
- : > $output
- set x $save_libobjs
- shift
- firstobj=
- if test "$compiler_needs_object" = yes; then
- firstobj="$1 "
- shift
- fi
- for obj
- do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result" >> $output
- done
- func_append delfiles " $output"
- func_to_tool_file "$output"
- output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
- else
- if test -n "$save_libobjs"; then
- func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
- eval test_cmds=\"$reload_cmds\"
- func_len " $test_cmds"
- len0=$func_len_result
- len=$len0
-
- # Loop over the list of objects to be linked.
- for obj in $save_libobjs
- do
- func_len " $obj"
- func_arith $len + $func_len_result
- len=$func_arith_result
- if test "X$objlist" = X ||
- test "$len" -lt "$max_cmd_len"; then
- func_append objlist " $obj"
- else
- # The command $test_cmds is almost too long, add a
- # command to the queue.
- if test "$k" -eq 1 ; then
- # The first file doesn't have a previous command to add.
- reload_objs=$objlist
- eval concat_cmds=\"$reload_cmds\"
- else
- # All subsequent reloadable object files will link in
- # the last one created.
- reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
- fi
- last_robj=$output_objdir/$output_la-${k}.$objext
- func_arith $k + 1
- k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
- objlist=" $obj"
- func_len " $last_robj"
- func_arith $len0 + $func_len_result
- len=$func_arith_result
- fi
- done
- # Handle the remaining objects by creating one last
- # reloadable object file. All subsequent reloadable object
- # files will link in the last one created.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
- if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
- fi
- func_append delfiles " $output"
-
- else
- output=
- fi
-
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
- $opt_dry_run || $RM $export_symbols
- libobjs=$output
- # Append the command to create the export file.
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
- if test -n "$last_robj"; then
- eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
- fi
- fi
-
- test -n "$save_libobjs" &&
- func_verbose "creating a temporary reloadable object file: $output"
-
- # Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
- for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
- func_quote_for_expand "$cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
- $opt_dry_run || eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
- ( cd "$output_objdir" && \
- $RM "${realname}T" && \
- $MV "${realname}U" "$realname" )
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- if test -n "$export_symbols_regex" && ${skipped_export-false}; then
- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
- func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
- fi
- fi
-
- if ${skipped_export-false}; then
- if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
- fi
-
- if test -n "$orig_export_symbols"; then
- # The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
- # FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
- # though. Also, the filter scales superlinearly with the number of
- # global variables. join(1) would be nice here, but unfortunately
- # isn't a blessed tool.
- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- func_append delfiles " $export_symbols $output_objdir/$libname.filter"
- export_symbols=$output_objdir/$libname.def
- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
- fi
- fi
-
- libobjs=$output
- # Restore the value of output.
- output=$save_output
-
- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
- eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
- test "X$libobjs" = "X " && libobjs=
- fi
- # Expand the library linking commands again to reset the
- # value of $libobjs for piecewise linking.
-
- # Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- cmds=$module_expsym_cmds
- else
- cmds=$module_cmds
- fi
- else
- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- cmds=$archive_expsym_cmds
- else
- cmds=$archive_cmds
- fi
- fi
- fi
-
- if test -n "$delfiles"; then
- # Append the command to remove temporary files to $cmds.
- eval cmds=\"\$cmds~\$RM $delfiles\"
- fi
-
- # Add any objects from preloaded convenience libraries
- if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $dlprefiles
- func_append libobjs " $func_extract_archives_result"
- test "X$libobjs" = "X " && libobjs=
- fi
-
- save_ifs="$IFS"; IFS='~'
- for cmd in $cmds; do
- IFS="$save_ifs"
- eval cmd=\"$cmd\"
- $opt_silent || {
- func_quote_for_expand "$cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
- $opt_dry_run || eval "$cmd" || {
- lt_exit=$?
-
- # Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
- ( cd "$output_objdir" && \
- $RM "${realname}T" && \
- $MV "${realname}U" "$realname" )
- fi
-
- exit $lt_exit
- }
- done
- IFS="$save_ifs"
-
- # Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
-
- if test -n "$convenience"; then
- if test -z "$whole_archive_flag_spec"; then
- func_show_eval '${RM}r "$gentop"'
- fi
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- # Create links to the real library.
- for linkname in $linknames; do
- if test "$realname" != "$linkname"; then
- func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
- fi
- done
-
- # If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
- # On all known operating systems, these are identical.
- dlname="$soname"
- fi
- fi
- ;;
-
- obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
- fi
-
- case " $deplibs" in
- *\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
- esac
-
- test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
-
- test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
-
- test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
-
- case $output in
- *.lo)
- test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
-
- libobj=$output
- func_lo2o "$libobj"
- obj=$func_lo2o_result
- ;;
- *)
- libobj=
- obj="$output"
- ;;
- esac
-
- # Delete the old objects.
- $opt_dry_run || $RM $obj $libobj
-
- # Objects from convenience libraries. This assumes
- # single-version convenience libraries. Whenever we create
- # different ones for PIC/non-PIC, this we'll have to duplicate
- # the extraction.
- reload_conv_objs=
- gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
- if test -n "$convenience"; then
- if test -n "$whole_archive_flag_spec"; then
- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
- else
- gentop="$output_objdir/${obj}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $convenience
- reload_conv_objs="$reload_objs $func_extract_archives_result"
- fi
- fi
-
- # If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
-
- # Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
- output="$obj"
- func_execute_cmds "$reload_cmds" 'exit $?'
-
- # Exit if we aren't doing a library object file.
- if test -z "$libobj"; then
- if test -n "$gentop"; then
- func_show_eval '${RM}r "$gentop"'
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$build_libtool_libs" != yes; then
- if test -n "$gentop"; then
- func_show_eval '${RM}r "$gentop"'
- fi
-
- # Create an invalid libtool object if no PIC, so that we don't
- # accidentally link it into a program.
- # $show "echo timestamp > $libobj"
- # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
- exit $EXIT_SUCCESS
- fi
-
- if test -n "$pic_flag" || test "$pic_mode" != default; then
- # Only do commands if we really have different PIC objects.
- reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
- func_execute_cmds "$reload_cmds" 'exit $?'
- fi
-
- if test -n "$gentop"; then
- func_show_eval '${RM}r "$gentop"'
- fi
-
- exit $EXIT_SUCCESS
- ;;
-
- prog)
- case $host in
- *cygwin*) func_stripname '' '.exe' "$output"
- output=$func_stripname_result.exe;;
- esac
- test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
-
- test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
-
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
-
- case $host in
- *-*-rhapsody* | *-*-darwin1.[012])
- # On Rhapsody replace the C library is the System framework
- compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
- finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
- ;;
- esac
-
- case $host in
- *-*-darwin*)
- # Don't allow lazy linking, it breaks C++ global constructors
- # But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
- case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
- 10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
- ;;
- esac
- fi
- # Time to change all our "foo.ltframework" stuff back to "-framework foo"
- compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- ;;
- esac
-
-
- # move library search paths that coincide with paths to not yet
- # installed libraries to the beginning of the library search list
- new_libs=
- for path in $notinst_path; do
- case " $new_libs " in
- *" -L$path/$objdir "*) ;;
- *)
- case " $compile_deplibs " in
- *" -L$path/$objdir "*)
- func_append new_libs " -L$path/$objdir" ;;
- esac
- ;;
- esac
- done
- for deplib in $compile_deplibs; do
- case $deplib in
- -L*)
- case " $new_libs " in
- *" $deplib "*) ;;
- *) func_append new_libs " $deplib" ;;
- esac
- ;;
- *) func_append new_libs " $deplib" ;;
- esac
- done
- compile_deplibs="$new_libs"
-
-
- func_append compile_command " $compile_deplibs"
- func_append finalize_command " $finalize_deplibs"
-
- if test -n "$rpath$xrpath"; then
- # If the user specified any rpath flags, then add them.
- for libdir in $rpath $xrpath; do
- # This is the magic to use -rpath.
- case "$finalize_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
- esac
- done
- fi
-
- # Now hardcode the library paths
- rpath=
- hardcode_libdirs=
- for libdir in $compile_rpath $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- func_append rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$perm_rpath " in
- *" $libdir "*) ;;
- *) func_append perm_rpath " $libdir" ;;
- esac
- fi
- case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
- case :$dllsearchpath: in
- *":$libdir:"*) ;;
- ::) dllsearchpath=$libdir;;
- *) func_append dllsearchpath ":$libdir";;
- esac
- case :$dllsearchpath: in
- *":$testbindir:"*) ;;
- ::) dllsearchpath=$testbindir;;
- *) func_append dllsearchpath ":$testbindir";;
- esac
- ;;
- esac
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- compile_rpath="$rpath"
-
- rpath=
- hardcode_libdirs=
- for libdir in $finalize_rpath; do
- if test -n "$hardcode_libdir_flag_spec"; then
- if test -n "$hardcode_libdir_separator"; then
- if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
- else
- # Just accumulate the unique libdirs.
- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
- ;;
- *)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
- ;;
- esac
- fi
- else
- eval flag=\"$hardcode_libdir_flag_spec\"
- func_append rpath " $flag"
- fi
- elif test -n "$runpath_var"; then
- case "$finalize_perm_rpath " in
- *" $libdir "*) ;;
- *) func_append finalize_perm_rpath " $libdir" ;;
- esac
- fi
- done
- # Substitute the hardcoded libdirs into the rpath.
- if test -n "$hardcode_libdir_separator" &&
- test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
- eval rpath=\" $hardcode_libdir_flag_spec\"
- fi
- finalize_rpath="$rpath"
-
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
- # Transform all the library objects into standard objects.
- compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
- finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
- fi
-
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
-
- # template prelinking step
- if test -n "$prelink_cmds"; then
- func_execute_cmds "$prelink_cmds" 'exit $?'
- fi
-
- wrappers_required=yes
- case $host in
- *cegcc* | *mingw32ce*)
- # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
- ;;
- *cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
- ;;
- *)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
- ;;
- esac
- if test "$wrappers_required" = no; then
- # Replace the output file specification.
- compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
-
- # We have no uninstalled library dependencies, so finalize right now.
- exit_status=0
- func_show_eval "$link_command" 'exit_status=$?'
-
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
- # Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
- fi
-
- exit $exit_status
- fi
-
- if test -n "$compile_shlibpath$finalize_shlibpath"; then
- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
- fi
- if test -n "$finalize_shlibpath"; then
- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
- fi
-
- compile_var=
- finalize_var=
- if test -n "$runpath_var"; then
- if test -n "$perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $perm_rpath; do
- func_append rpath "$dir:"
- done
- compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- if test -n "$finalize_perm_rpath"; then
- # We should set the runpath_var.
- rpath=
- for dir in $finalize_perm_rpath; do
- func_append rpath "$dir:"
- done
- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
- fi
- fi
-
- if test "$no_install" = yes; then
- # We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
- # Replace the output file specification.
- link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- # Delete the old output file.
- $opt_dry_run || $RM $output
- # Link the executable and exit
- func_show_eval "$link_command" 'exit $?'
-
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
- exit $EXIT_SUCCESS
- fi
-
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
-
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
-
- # Replace the output file specification.
- link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
- # Delete the old output files.
- $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
- func_show_eval "$link_command" 'exit $?'
-
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output_objdir/$outputname"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
- # Now create the wrapper script.
- func_verbose "creating $output"
-
- # Quote the relink command for shipping.
- if test -n "$relink_command"; then
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- func_quote_for_eval "$var_value"
- relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
- fi
- done
- relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- fi
-
- # Only actually do things if not in dry run mode.
- $opt_dry_run || {
- # win32 will think the script is a binary if it has
- # a .exe suffix, so we strip it off here.
- case $output in
- *.exe) func_stripname '' '.exe' "$output"
- output=$func_stripname_result ;;
- esac
- # test for cygwin because mv fails w/o .exe extensions
- case $host in
- *cygwin*)
- exeext=.exe
- func_stripname '' '.exe' "$outputname"
- outputname=$func_stripname_result ;;
- *) exeext= ;;
- esac
- case $host in
- *cygwin* | *mingw* )
- func_dirname_and_basename "$output" "" "."
- output_name=$func_basename_result
- output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
- $RM $cwrappersource $cwrapper
- trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
- func_emit_cwrapperexe_src > $cwrappersource
-
- # The wrapper executable is built using the $host compiler,
- # because it contains $host paths and files. If cross-
- # compiling, it, like the target executable, must be
- # executed on the $host or under an emulation environment.
- $opt_dry_run || {
- $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
- $STRIP $cwrapper
- }
-
- # Now, create the wrapper script for func_source use:
- func_ltwrapper_scriptname $cwrapper
- $RM $func_ltwrapper_scriptname_result
- trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
- $opt_dry_run || {
- # note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
- $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
- else
- func_emit_wrapper no > $func_ltwrapper_scriptname_result
- fi
- }
- ;;
- * )
- $RM $output
- trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
-
- func_emit_wrapper no > $output
- chmod +x $output
- ;;
- esac
- }
- exit $EXIT_SUCCESS
- ;;
- esac
-
- # See if we need to build an old-fashioned archive.
- for oldlib in $oldlibs; do
-
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
- build_libtool_libs=no
- else
- oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
-
- if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $addlibs
- func_append oldobjs " $func_extract_archives_result"
- fi
-
- # Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- cmds=$old_archive_from_new_cmds
- else
-
- # Add any objects from preloaded convenience libraries
- if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
-
- func_extract_archives $gentop $dlprefiles
- func_append oldobjs " $func_extract_archives_result"
- fi
-
- # POSIX demands no paths to be encoded in archives. We have
- # to avoid creating archives with duplicate basenames if we
- # might have to extract them afterwards, e.g., when creating a
- # static archive out of a convenience library, or when linking
- # the entirety of a libtool archive into another (currently
- # not supported by libtool).
- if (for obj in $oldobjs
- do
- func_basename "$obj"
- $ECHO "$func_basename_result"
- done | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
- func_mkdir_p "$gentop"
- save_oldobjs=$oldobjs
- oldobjs=
- counter=1
- for obj in $save_oldobjs
- do
- func_basename "$obj"
- objbase="$func_basename_result"
- case " $oldobjs " in
- " ") oldobjs=$obj ;;
- *[\ /]"$objbase "*)
- while :; do
- # Make sure we don't pick an alternate name that also
- # overlaps.
- newobj=lt$counter-$objbase
- func_arith $counter + 1
- counter=$func_arith_result
- case " $oldobjs " in
- *[\ /]"$newobj "*) ;;
- *) if test ! -f "$gentop/$newobj"; then break; fi ;;
- esac
- done
- func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- func_append oldobjs " $gentop/$newobj"
- ;;
- *) func_append oldobjs " $obj" ;;
- esac
- done
- fi
- func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
- tool_oldlib=$func_to_tool_file_result
- eval cmds=\"$old_archive_cmds\"
-
- func_len " $cmds"
- len=$func_len_result
- if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- cmds=$old_archive_cmds
- elif test -n "$archiver_list_spec"; then
- func_verbose "using command file archive linking..."
- for obj in $oldobjs
- do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result"
- done > $output_objdir/$libname.libcmd
- func_to_tool_file "$output_objdir/$libname.libcmd"
- oldobjs=" $archiver_list_spec$func_to_tool_file_result"
- cmds=$old_archive_cmds
- else
- # the command line is too long to link in one step, link in parts
- func_verbose "using piecewise archive linking..."
- save_RANLIB=$RANLIB
- RANLIB=:
- objlist=
- concat_cmds=
- save_oldobjs=$oldobjs
- oldobjs=
- # Is there a better way of finding the last object in the list?
- for obj in $save_oldobjs
- do
- last_oldobj=$obj
- done
- eval test_cmds=\"$old_archive_cmds\"
- func_len " $test_cmds"
- len0=$func_len_result
- len=$len0
- for obj in $save_oldobjs
- do
- func_len " $obj"
- func_arith $len + $func_len_result
- len=$func_arith_result
- func_append objlist " $obj"
- if test "$len" -lt "$max_cmd_len"; then
- :
- else
- # the above command should be used before it gets too long
- oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
- RANLIB=$save_RANLIB
- fi
- test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
- objlist=
- len=$len0
- fi
- done
- RANLIB=$save_RANLIB
- oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
- eval cmds=\"\$concat_cmds\"
- else
- eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
- fi
- fi
- fi
- func_execute_cmds "$cmds" 'exit $?'
- done
-
- test -n "$generated" && \
- func_show_eval "${RM}r$generated"
-
- # Now create the libtool archive.
- case $output in
- *.la)
- old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
- func_verbose "creating $output"
-
- # Preserve any variables that may affect compiler behavior
- for var in $variables_saved_for_relink; do
- if eval test -z \"\${$var+set}\"; then
- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
- elif eval var_value=\$$var; test -z "$var_value"; then
- relink_command="$var=; export $var; $relink_command"
- else
- func_quote_for_eval "$var_value"
- relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
- fi
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
-
- # Only create the output if not a dry run.
- $opt_dry_run || {
- for installed in no yes; do
- if test "$installed" = yes; then
- if test -z "$install_libdir"; then
- break
- fi
- output="$output_objdir/$outputname"i
- # Replace all uninstalled libtool libraries with the installed ones
- newdependency_libs=
- for deplib in $dependency_libs; do
- case $deplib in
- *.la)
- func_basename "$deplib"
- name="$func_basename_result"
- func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
- test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
- func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
- ;;
- -L*)
- func_stripname -L '' "$deplib"
- func_replace_sysroot "$func_stripname_result"
- func_append newdependency_libs " -L$func_replace_sysroot_result"
- ;;
- -R*)
- func_stripname -R '' "$deplib"
- func_replace_sysroot "$func_stripname_result"
- func_append newdependency_libs " -R$func_replace_sysroot_result"
- ;;
- *) func_append newdependency_libs " $deplib" ;;
- esac
- done
- dependency_libs="$newdependency_libs"
- newdlfiles=
-
- for lib in $dlfiles; do
- case $lib in
- *.la)
- func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
- func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
- ;;
- *) func_append newdlfiles " $lib" ;;
- esac
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- *.la)
- # Only pass preopened files to the pseudo-archive (for
- # eventual linking with the app. that links it) if we
- # didn't already link the preopened objects directly into
- # the library:
- func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
- test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
- func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
- ;;
- esac
- done
- dlprefiles="$newdlprefiles"
- else
- newdlfiles=
- for lib in $dlfiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- func_append newdlfiles " $abs"
- done
- dlfiles="$newdlfiles"
- newdlprefiles=
- for lib in $dlprefiles; do
- case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
- *) abs=`pwd`"/$lib" ;;
- esac
- func_append newdlprefiles " $abs"
- done
- dlprefiles="$newdlprefiles"
- fi
- $RM $output
- # place dlname in correct position for cygwin
- # In fact, it would be nice if we could use this code for all target
- # systems that can't hard-code library paths into their executables
- # and that have no shared library path variable independent of PATH,
- # but it turns out we can't easily determine that from inspecting
- # libtool variables, so we have to hard-code the OSs to which it
- # applies here; at the moment, that means platforms that use the PE
- # object format with DLL files. See the long comment at the top of
- # tests/bindir.at for full details.
- tdlname=$dlname
- case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
- # If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
- func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
- else
- # Otherwise fall back on heuristic.
- tdlname=../bin/$dlname
- fi
- ;;
- esac
- $ECHO > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Linker flags that can not go in dependency_libs.
-inherited_linker_flags='$new_inherited_linker_flags'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Names of additional weak libraries provided by this library
-weak_library_names='$weak_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
- $ECHO >> $output "\
-relink_command=\"$relink_command\""
- fi
- done
- }
-
- # Do a symbolic link so that the libtool archive can be found in
- # LD_LIBRARY_PATH before the program is installed.
- func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
- ;;
- esac
- exit $EXIT_SUCCESS
-}
-
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
-
-
-# func_mode_uninstall arg...
-func_mode_uninstall ()
-{
- $opt_debug
- RM="$nonopt"
- files=
- rmforce=
- exit_status=0
-
- # This variable tells wrapper scripts just to set variables rather
- # than running their programs.
- libtool_install_magic="$magic"
-
- for arg
- do
- case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
- -*) func_append RM " $arg" ;;
- *) func_append files " $arg" ;;
- esac
- done
-
- test -z "$RM" && \
- func_fatal_help "you must specify an RM program"
-
- rmdirs=
-
- for file in $files; do
- func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
- else
- odir="$dir/$objdir"
- fi
- func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
-
- # Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
- case " $rmdirs " in
- *" $odir "*) ;;
- *) func_append rmdirs " $odir" ;;
- esac
- fi
-
- # Don't error if the file doesn't exist and rm -f was used.
- if { test -L "$file"; } >/dev/null 2>&1 ||
- { test -h "$file"; } >/dev/null 2>&1 ||
- test -f "$file"; then
- :
- elif test -d "$file"; then
- exit_status=1
- continue
- elif test "$rmforce" = yes; then
- continue
- fi
-
- rmfiles="$file"
-
- case $name in
- *.la)
- # Possibly a libtool archive, so verify it.
- if func_lalib_p "$file"; then
- func_source $dir/$name
-
- # Delete the libtool libraries and symlinks.
- for n in $library_names; do
- func_append rmfiles " $odir/$n"
- done
- test -n "$old_library" && func_append rmfiles " $odir/$old_library"
-
- case "$opt_mode" in
- clean)
- case " $library_names " in
- *" $dlname "*) ;;
- *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
- esac
- test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
- ;;
- uninstall)
- if test -n "$library_names"; then
- # Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
- fi
-
- if test -n "$old_library"; then
- # Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
- fi
- # FIXME: should reinstall the best remaining shared library.
- ;;
- esac
- fi
- ;;
-
- *.lo)
- # Possibly a libtool object, so verify it.
- if func_lalib_p "$file"; then
-
- # Read the .lo file
- func_source $dir/$name
-
- # Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
- func_append rmfiles " $dir/$pic_object"
- fi
-
- # Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
- func_append rmfiles " $dir/$non_pic_object"
- fi
- fi
- ;;
-
- *)
- if test "$opt_mode" = clean ; then
- noexename=$name
- case $file in
- *.exe)
- func_stripname '' '.exe' "$file"
- file=$func_stripname_result
- func_stripname '' '.exe' "$name"
- noexename=$func_stripname_result
- # $file with .exe has already been added to rmfiles,
- # add $file without .exe
- func_append rmfiles " $file"
- ;;
- esac
- # Do a test to see if this is a libtool program.
- if func_ltwrapper_p "$file"; then
- if func_ltwrapper_executable_p "$file"; then
- func_ltwrapper_scriptname "$file"
- relink_command=
- func_source $func_ltwrapper_scriptname_result
- func_append rmfiles " $func_ltwrapper_scriptname_result"
- else
- relink_command=
- func_source $dir/$noexename
- fi
-
- # note $name still contains .exe if it was in $file originally
- # as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
- func_append rmfiles " $odir/lt-$name"
- fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
- fi
- fi
- fi
- ;;
- esac
- func_show_eval "$RM $rmfiles" 'exit_status=1'
- done
-
- # Try to remove the ${objdir}s in the directories where we deleted files
- for dir in $rmdirs; do
- if test -d "$dir"; then
- func_show_eval "rmdir $dir >/dev/null 2>&1"
- fi
- done
-
- exit $exit_status
-}
-
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
-
-test -z "$opt_mode" && {
- help="$generic_help"
- func_fatal_help "you must specify a MODE"
-}
-
-test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
-
-if test -n "$exec_cmd"; then
- eval exec "$exec_cmd"
- exit $EXIT_FAILURE
-fi
-
-exit $exit_status
-
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them. This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration. But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-build_libtool_libs=no
-build_old_libs=yes
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
-# vi:sw=2
-
+++ /dev/null
-#serial 2
-
-dnl From Bruno Haible.
-
-AC_DEFUN([jm_LANGINFO_CODESET],
-[
- AC_CHECK_HEADERS(langinfo.h)
- AC_CHECK_FUNCS(nl_langinfo)
-
- AC_CACHE_CHECK([for nl_langinfo and CODESET], jm_cv_langinfo_codeset,
- [AC_TRY_LINK([#include <langinfo.h>],
- [char* cs = nl_langinfo(CODESET);],
- jm_cv_langinfo_codeset=yes,
- jm_cv_langinfo_codeset=no)
- ])
- if test $jm_cv_langinfo_codeset = yes; then
- AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
- [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
- fi
-])
+++ /dev/null
-# gettext.m4 serial 63 (gettext-0.18)
-dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
-
-dnl Macro to add for using GNU gettext.
-
-dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
-dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
-dnl default (if it is not specified or empty) is 'no-libtool'.
-dnl INTLSYMBOL should be 'external' for packages with no intl directory,
-dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
-dnl If INTLSYMBOL is 'use-libtool', then a libtool library
-dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
-dnl depending on --{enable,disable}-{shared,static} and on the presence of
-dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
-dnl $(top_builddir)/intl/libintl.a will be created.
-dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
-dnl implementations (in libc or libintl) without the ngettext() function
-dnl will be ignored. If NEEDSYMBOL is specified and is
-dnl 'need-formatstring-macros', then GNU gettext implementations that don't
-dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
-dnl INTLDIR is used to find the intl libraries. If empty,
-dnl the value `$(top_builddir)/intl/' is used.
-dnl
-dnl The result of the configuration is one of three cases:
-dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
-dnl and used.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 2) GNU gettext has been found in the system's C library.
-dnl Catalog format: GNU --> install in $(datadir)
-dnl Catalog extension: .mo after installation, .gmo in source tree
-dnl 3) No internationalization, always use English msgid.
-dnl Catalog format: none
-dnl Catalog extension: none
-dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
-dnl The use of .gmo is historical (it was needed to avoid overwriting the
-dnl GNU format catalogs when building on a platform with an X/Open gettext),
-dnl but we keep it in order not to force irrelevant filename changes on the
-dnl maintainers.
-dnl
-AC_DEFUN([AM_GNU_GETTEXT],
-[
- dnl Argument checking.
- ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
- [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
-])])])])])
- ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
- [AC_DIAGNOSE([obsolete], [Use of AM_GNU_GETTEXT without [external] argument is deprecated.])])
- ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
- [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
-])])])])
- define([gt_included_intl],
- ifelse([$1], [external],
- ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
- [yes]))
- define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
- gt_NEEDS_INIT
- AM_GNU_GETTEXT_NEED([$2])
-
- AC_REQUIRE([AM_PO_SUBDIRS])dnl
- ifelse(gt_included_intl, yes, [
- AC_REQUIRE([AM_INTL_SUBDIR])dnl
- ])
-
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- dnl Ideally we would do this search only after the
- dnl if test "$USE_NLS" = "yes"; then
- dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
- dnl the configure script would need to contain the same shell code
- dnl again, outside any 'if'. There are two solutions:
- dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
- dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
- dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
- dnl documented, we avoid it.
- ifelse(gt_included_intl, yes, , [
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
- ])
-
- dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
- gt_INTL_MACOSX
-
- dnl Set USE_NLS.
- AC_REQUIRE([AM_NLS])
-
- ifelse(gt_included_intl, yes, [
- BUILD_INCLUDED_LIBINTL=no
- USE_INCLUDED_LIBINTL=no
- ])
- LIBINTL=
- LTLIBINTL=
- POSUB=
-
- dnl Add a version number to the cache macros.
- case " $gt_needs " in
- *" need-formatstring-macros "*) gt_api_version=3 ;;
- *" need-ngettext "*) gt_api_version=2 ;;
- *) gt_api_version=1 ;;
- esac
- gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
- gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
-
- dnl If we use NLS figure out what method
- if test "$USE_NLS" = "yes"; then
- gt_use_preinstalled_gnugettext=no
- ifelse(gt_included_intl, yes, [
- AC_MSG_CHECKING([whether included gettext is requested])
- AC_ARG_WITH([included-gettext],
- [ --with-included-gettext use the GNU gettext library included here],
- nls_cv_force_use_gnu_gettext=$withval,
- nls_cv_force_use_gnu_gettext=no)
- AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
-
- nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
- if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
- ])
- dnl User does not insist on using GNU NLS library. Figure out what
- dnl to use. If GNU gettext is available we use this. Else we have
- dnl to fall back to GNU NLS library.
-
- if test $gt_api_version -ge 3; then
- gt_revision_test_code='
-#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
-#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
-#endif
-changequote(,)dnl
-typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-changequote([,])dnl
-'
- else
- gt_revision_test_code=
- fi
- if test $gt_api_version -ge 2; then
- gt_expression_test_code=' + * ngettext ("", "", 0)'
- else
- gt_expression_test_code=
- fi
-
- AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
- [AC_TRY_LINK([#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern int *_nl_domain_bindings;],
- [bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings],
- [eval "$gt_func_gnugettext_libc=yes"],
- [eval "$gt_func_gnugettext_libc=no"])])
-
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
- dnl Sometimes libintl requires libiconv, so first search for libiconv.
- ifelse(gt_included_intl, yes, , [
- AM_ICONV_LINK
- ])
- dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
- dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
- dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
- dnl even if libiconv doesn't exist.
- AC_LIB_LINKFLAGS_BODY([intl])
- AC_CACHE_CHECK([for GNU gettext in libintl],
- [$gt_func_gnugettext_libintl],
- [gt_save_CPPFLAGS="$CPPFLAGS"
- CPPFLAGS="$CPPFLAGS $INCINTL"
- gt_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBINTL"
- dnl Now see whether libintl exists and does not depend on libiconv.
- AC_TRY_LINK([#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);],
- [bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
- [eval "$gt_func_gnugettext_libintl=yes"],
- [eval "$gt_func_gnugettext_libintl=no"])
- dnl Now see whether libintl exists and depends on libiconv.
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
- LIBS="$LIBS $LIBICONV"
- AC_TRY_LINK([#include <libintl.h>
-$gt_revision_test_code
-extern int _nl_msg_cat_cntr;
-extern
-#ifdef __cplusplus
-"C"
-#endif
-const char *_nl_expand_alias (const char *);],
- [bindtextdomain ("", "");
-return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
- [LIBINTL="$LIBINTL $LIBICONV"
- LTLIBINTL="$LTLIBINTL $LTLIBICONV"
- eval "$gt_func_gnugettext_libintl=yes"
- ])
- fi
- CPPFLAGS="$gt_save_CPPFLAGS"
- LIBS="$gt_save_LIBS"])
- fi
-
- dnl If an already present or preinstalled GNU gettext() is found,
- dnl use it. But if this macro is used in GNU gettext, and GNU
- dnl gettext is already preinstalled in libintl, we update this
- dnl libintl. (Cf. the install rule in intl/Makefile.in.)
- if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
- || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
- && test "$PACKAGE" != gettext-runtime \
- && test "$PACKAGE" != gettext-tools; }; then
- gt_use_preinstalled_gnugettext=yes
- else
- dnl Reset the values set by searching for libintl.
- LIBINTL=
- LTLIBINTL=
- INCINTL=
- fi
-
- ifelse(gt_included_intl, yes, [
- if test "$gt_use_preinstalled_gnugettext" != "yes"; then
- dnl GNU gettext is not found in the C library.
- dnl Fall back on included GNU gettext library.
- nls_cv_use_gnu_gettext=yes
- fi
- fi
-
- if test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions used to generate GNU NLS library.
- BUILD_INCLUDED_LIBINTL=yes
- USE_INCLUDED_LIBINTL=yes
- LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
- LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
- LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
- fi
-
- CATOBJEXT=
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Mark actions to use GNU gettext tools.
- CATOBJEXT=.gmo
- fi
- ])
-
- if test -n "$INTL_MACOSX_LIBS"; then
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- dnl Some extra flags are needed during linking.
- LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
- LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
- fi
- fi
-
- if test "$gt_use_preinstalled_gnugettext" = "yes" \
- || test "$nls_cv_use_gnu_gettext" = "yes"; then
- AC_DEFINE([ENABLE_NLS], [1],
- [Define to 1 if translation of program messages to the user's native language
- is requested.])
- else
- USE_NLS=no
- fi
- fi
-
- AC_MSG_CHECKING([whether to use NLS])
- AC_MSG_RESULT([$USE_NLS])
- if test "$USE_NLS" = "yes"; then
- AC_MSG_CHECKING([where the gettext function comes from])
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- gt_source="external libintl"
- else
- gt_source="libc"
- fi
- else
- gt_source="included intl directory"
- fi
- AC_MSG_RESULT([$gt_source])
- fi
-
- if test "$USE_NLS" = "yes"; then
-
- if test "$gt_use_preinstalled_gnugettext" = "yes"; then
- if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
- AC_MSG_CHECKING([how to link with libintl])
- AC_MSG_RESULT([$LIBINTL])
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
- fi
-
- dnl For backward compatibility. Some packages may be using this.
- AC_DEFINE([HAVE_GETTEXT], [1],
- [Define if the GNU gettext() function is already present or preinstalled.])
- AC_DEFINE([HAVE_DCGETTEXT], [1],
- [Define if the GNU dcgettext() function is already present or preinstalled.])
- fi
-
- dnl We need to process the po/ directory.
- POSUB=po
- fi
-
- ifelse(gt_included_intl, yes, [
- dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
- dnl to 'yes' because some of the testsuite requires it.
- if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
- BUILD_INCLUDED_LIBINTL=yes
- fi
-
- dnl Make all variables we use known to autoconf.
- AC_SUBST([BUILD_INCLUDED_LIBINTL])
- AC_SUBST([USE_INCLUDED_LIBINTL])
- AC_SUBST([CATOBJEXT])
-
- dnl For backward compatibility. Some configure.ins may be using this.
- nls_cv_header_intl=
- nls_cv_header_libgt=
-
- dnl For backward compatibility. Some Makefiles may be using this.
- DATADIRNAME=share
- AC_SUBST([DATADIRNAME])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INSTOBJEXT=.mo
- AC_SUBST([INSTOBJEXT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- GENCAT=gencat
- AC_SUBST([GENCAT])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLOBJS=
- if test "$USE_INCLUDED_LIBINTL" = yes; then
- INTLOBJS="\$(GETTOBJS)"
- fi
- AC_SUBST([INTLOBJS])
-
- dnl Enable libtool support if the surrounding package wishes it.
- INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
- AC_SUBST([INTL_LIBTOOL_SUFFIX_PREFIX])
- ])
-
- dnl For backward compatibility. Some Makefiles may be using this.
- INTLLIBS="$LIBINTL"
- AC_SUBST([INTLLIBS])
-
- dnl Make all documented variables known to autoconf.
- AC_SUBST([LIBINTL])
- AC_SUBST([LTLIBINTL])
- AC_SUBST([POSUB])
-])
-
-
-dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
-m4_define([gt_NEEDS_INIT],
-[
- m4_divert_text([DEFAULTS], [gt_needs=])
- m4_define([gt_NEEDS_INIT], [])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
-AC_DEFUN([AM_GNU_GETTEXT_NEED],
-[
- m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
-])
-
-
-dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
-AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
+++ /dev/null
-#serial 2
-
-# Test for the GNU C Library, version 2.1 or newer.
-# From Bruno Haible.
-
-AC_DEFUN([jm_GLIBC21],
- [
- AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
- ac_cv_gnu_library_2_1,
- [AC_EGREP_CPP([Lucky GNU user],
- [
-#include <features.h>
-#ifdef __GNU_LIBRARY__
- #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
- Lucky GNU user
- #endif
-#endif
- ],
- ac_cv_gnu_library_2_1=yes,
- ac_cv_gnu_library_2_1=no)
- ]
- )
- AC_SUBST(GLIBC21)
- GLIBC21="$ac_cv_gnu_library_2_1"
- ]
-)
+++ /dev/null
-# iconv.m4 serial 11 (gettext-0.18.1)
-dnl Copyright (C) 2000-2002, 2007-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
-[
- dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([iconv])
-])
-
-AC_DEFUN([AM_ICONV_LINK],
-[
- dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
- dnl those with the standalone portable GNU libiconv installed).
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
-
- dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
- dnl accordingly.
- AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
-
- dnl Add $INCICONV to CPPFLAGS before performing the following checks,
- dnl because if the user has installed libiconv and not disabled its use
- dnl via --without-libiconv-prefix, he wants to use it. The first
- dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
- am_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
-
- AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
- am_cv_func_iconv="no, consider installing GNU libiconv"
- am_cv_lib_iconv=no
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- [am_cv_func_iconv=yes])
- if test "$am_cv_func_iconv" != yes; then
- am_save_LIBS="$LIBS"
- LIBS="$LIBS $LIBICONV"
- AC_TRY_LINK([#include <stdlib.h>
-#include <iconv.h>],
- [iconv_t cd = iconv_open("","");
- iconv(cd,NULL,NULL,NULL,NULL);
- iconv_close(cd);],
- [am_cv_lib_iconv=yes]
- [am_cv_func_iconv=yes])
- LIBS="$am_save_LIBS"
- fi
- ])
- if test "$am_cv_func_iconv" = yes; then
- AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
- dnl This tests against bugs in AIX 5.1, HP-UX 11.11, Solaris 10.
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- AC_TRY_RUN([
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
- [case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac])
- LIBS="$am_save_LIBS"
- ])
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
- AC_DEFINE([HAVE_ICONV], [1],
- [Define if you have the iconv() function and it works.])
- fi
- if test "$am_cv_lib_iconv" = yes; then
- AC_MSG_CHECKING([how to link with libiconv])
- AC_MSG_RESULT([$LIBICONV])
- else
- dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
- dnl either.
- CPPFLAGS="$am_save_CPPFLAGS"
- LIBICONV=
- LTLIBICONV=
- fi
- AC_SUBST([LIBICONV])
- AC_SUBST([LTLIBICONV])
-])
-
-dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
-dnl avoid warnings like
-dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
-dnl This is tricky because of the way 'aclocal' is implemented:
-dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
-dnl Otherwise aclocal's initial scan pass would miss the macro definition.
-dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
-dnl Otherwise aclocal would emit many "Use of uninitialized value $1"
-dnl warnings.
-m4_define([gl_iconv_AC_DEFUN],
- m4_version_prereq([2.64],
- [[AC_DEFUN_ONCE(
- [$1], [$2])]],
- [[AC_DEFUN(
- [$1], [$2])]]))
-gl_iconv_AC_DEFUN([AM_ICONV],
-[
- AM_ICONV_LINK
- if test "$am_cv_func_iconv" = yes; then
- AC_MSG_CHECKING([for iconv declaration])
- AC_CACHE_VAL([am_cv_proto_iconv], [
- AC_TRY_COMPILE([
-#include <stdlib.h>
-#include <iconv.h>
-extern
-#ifdef __cplusplus
-"C"
-#endif
-#if defined(__STDC__) || defined(__cplusplus)
-size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
-#else
-size_t iconv();
-#endif
-], [], [am_cv_proto_iconv_arg1=""], [am_cv_proto_iconv_arg1="const"])
- am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
- am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
- AC_MSG_RESULT([
- $am_cv_proto_iconv])
- AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
- [Define as const if the declaration of iconv() needs const.])
- fi
-])
+++ /dev/null
-# lib-ld.m4 serial 4 (gettext-0.18)
-dnl Copyright (C) 1996-2003, 2009-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl Subroutines of libtool.m4,
-dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
-dnl with libtool.m4.
-
-dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
-AC_DEFUN([AC_LIB_PROG_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- acl_cv_prog_gnu_ld=yes ;;
-*)
- acl_cv_prog_gnu_ld=no ;;
-esac])
-with_gnu_ld=$acl_cv_prog_gnu_ld
-])
-
-dnl From libtool-1.4. Sets the variable LD.
-AC_DEFUN([AC_LIB_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]* | [A-Za-z]:[\\/]*)]
- [re_direlt='/[^/][^/]*/\.\./']
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL([acl_cv_path_LD],
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- acl_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
- *)
- test "$with_gnu_ld" != yes && break ;;
- esac
- fi
- done
- IFS="$ac_save_ifs"
-else
- acl_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$acl_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT([$LD])
-else
- AC_MSG_RESULT([no])
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_LIB_PROG_LD_GNU
-])
+++ /dev/null
-# lib-link.m4 serial 21 (gettext-0.18)
-dnl Copyright (C) 2001-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-AC_PREREQ([2.54])
-
-dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
-dnl augments the CPPFLAGS variable.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[translit([$1],[./-], [___])])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
- ac_cv_lib[]Name[]_libs="$LIB[]NAME"
- ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
- ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
- ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
- ])
- LIB[]NAME="$ac_cv_lib[]Name[]_libs"
- LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
- INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
- LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
- dnl results of this search when this library appears as a dependency.
- HAVE_LIB[]NAME=yes
- popdef([NAME])
- popdef([Name])
-])
-
-dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
-dnl searches for libname and the libraries corresponding to explicit and
-dnl implicit dependencies, together with the specified include files and
-dnl the ability to compile and link the specified testcode. The missing-message
-dnl defaults to 'no' and may contain additional hints for the user.
-dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
-dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
-dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
-dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
-dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
-dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
-[
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- AC_REQUIRE([AC_LIB_RPATH])
- pushdef([Name],[translit([$1],[./-], [___])])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
-
- dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
- dnl accordingly.
- AC_LIB_LINKFLAGS_BODY([$1], [$2])
-
- dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
- dnl because if the user has installed lib[]Name and not disabled its use
- dnl via --without-lib[]Name-prefix, he wants to use it.
- ac_save_CPPFLAGS="$CPPFLAGS"
- AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
-
- AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
- ac_save_LIBS="$LIBS"
- dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
- dnl because these -l options might require -L options that are present in
- dnl LIBS. -l options benefit only from the -L options listed before it.
- dnl Otherwise, add it to the front of LIBS, because it may be a static
- dnl library that depends on another static library that is present in LIBS.
- dnl Static libraries benefit only from the static libraries listed after
- dnl it.
- case " $LIB[]NAME" in
- *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
- *) LIBS="$LIB[]NAME $LIBS" ;;
- esac
- AC_TRY_LINK([$3], [$4],
- [ac_cv_lib[]Name=yes],
- [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
- LIBS="$ac_save_LIBS"
- ])
- if test "$ac_cv_lib[]Name" = yes; then
- HAVE_LIB[]NAME=yes
- AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
- AC_MSG_CHECKING([how to link with lib[]$1])
- AC_MSG_RESULT([$LIB[]NAME])
- else
- HAVE_LIB[]NAME=no
- dnl If $LIB[]NAME didn't lead to a usable library, we don't need
- dnl $INC[]NAME either.
- CPPFLAGS="$ac_save_CPPFLAGS"
- LIB[]NAME=
- LTLIB[]NAME=
- LIB[]NAME[]_PREFIX=
- fi
- AC_SUBST([HAVE_LIB]NAME)
- AC_SUBST([LIB]NAME)
- AC_SUBST([LTLIB]NAME)
- AC_SUBST([LIB]NAME[_PREFIX])
- popdef([NAME])
- popdef([Name])
-])
-
-dnl Determine the platform dependent parameters needed to use rpath:
-dnl acl_libext,
-dnl acl_shlibext,
-dnl acl_hardcode_libdir_flag_spec,
-dnl acl_hardcode_libdir_separator,
-dnl acl_hardcode_direct,
-dnl acl_hardcode_minus_L.
-AC_DEFUN([AC_LIB_RPATH],
-[
- dnl Tell automake >= 1.10 to complain if config.rpath is missing.
- m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
- AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
- AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
- AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
- AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
- AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
- CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
- ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
- . ./conftest.sh
- rm -f ./conftest.sh
- acl_cv_rpath=done
- ])
- wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
- dnl Determine whether the user wants rpath handling at all.
- AC_ARG_ENABLE([rpath],
- [ --disable-rpath do not hardcode runtime library paths],
- :, enable_rpath=yes)
-])
-
-dnl AC_LIB_FROMPACKAGE(name, package)
-dnl declares that libname comes from the given package. The configure file
-dnl will then not have a --with-libname-prefix option but a
-dnl --with-package-prefix option. Several libraries can come from the same
-dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
-dnl macro call that searches for libname.
-AC_DEFUN([AC_LIB_FROMPACKAGE],
-[
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- define([acl_frompackage_]NAME, [$2])
- popdef([NAME])
- pushdef([PACK],[$2])
- pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- define([acl_libsinpackage_]PACKUP,
- m4_ifdef([acl_libsinpackage_]PACKUP, [acl_libsinpackage_]PACKUP[[, ]],)[lib$1])
- popdef([PACKUP])
- popdef([PACK])
-])
-
-dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
-dnl the libraries corresponding to explicit and implicit dependencies.
-dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
-dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
-dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
-AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
-[
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- pushdef([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
- pushdef([PACKUP],[translit(PACK,[abcdefghijklmnopqrstuvwxyz./-],
- [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
- pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
- dnl Autoconf >= 2.61 supports dots in --with options.
- pushdef([P_A_C_K],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit(PACK,[.],[_])],PACK)])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_ARG_WITH(P_A_C_K[-prefix],
-[[ --with-]]P_A_C_K[[-prefix[=DIR] search for ]PACKLIBS[ in DIR/include and DIR/lib
- --without-]]P_A_C_K[[-prefix don't search for ]PACKLIBS[ in includedir and libdir]],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
- fi
- fi
-])
- dnl Search the library and its dependencies in $additional_libdir and
- dnl $LDFLAGS. Using breadth-first-seach.
- LIB[]NAME=
- LTLIB[]NAME=
- INC[]NAME=
- LIB[]NAME[]_PREFIX=
- dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
- dnl computed. So it has to be reset here.
- HAVE_LIB[]NAME=
- rpathdirs=
- ltrpathdirs=
- names_already_handled=
- names_next_round='$1 $2'
- while test -n "$names_next_round"; do
- names_this_round="$names_next_round"
- names_next_round=
- for name in $names_this_round; do
- already_handled=
- for n in $names_already_handled; do
- if test "$n" = "$name"; then
- already_handled=yes
- break
- fi
- done
- if test -z "$already_handled"; then
- names_already_handled="$names_already_handled $name"
- dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
- dnl or AC_LIB_HAVE_LINKFLAGS call.
- uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
- eval value=\"\$HAVE_LIB$uppername\"
- if test -n "$value"; then
- if test "$value" = yes; then
- eval value=\"\$LIB$uppername\"
- test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
- eval value=\"\$LTLIB$uppername\"
- test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
- else
- dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
- dnl that this library doesn't exist. So just drop it.
- :
- fi
- else
- dnl Search the library lib$name in $additional_libdir and $LDFLAGS
- dnl and the already constructed $LIBNAME/$LTLIBNAME.
- found_dir=
- found_la=
- found_so=
- found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
- if test $use_additional = yes; then
- dir="$additional_libdir"
- dnl The same code as in the loop below:
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- fi
- if test "X$found_dir" = "X"; then
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- case "$x" in
- -L*)
- dir=`echo "X$x" | sed -e 's/^X-L//'`
- dnl First look for a shared library.
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
- else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
- fi
- fi
- dnl Then look for a static library.
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
- fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
- fi
- fi
- ;;
- esac
- if test "X$found_dir" != "X"; then
- break
- fi
- done
- fi
- if test "X$found_dir" != "X"; then
- dnl Found the library.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
- if test "X$found_so" != "X"; then
- dnl Linking with a shared library. We attempt to hardcode its
- dnl directory into the executable's runpath, unless it's the
- dnl standard /usr/lib.
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
- dnl No hardcoding is needed.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $found_dir"
- fi
- dnl The hardcoding into $LIBNAME is system dependent.
- if test "$acl_hardcode_direct" = yes; then
- dnl Using DIR/libNAME.so during linking hardcodes DIR into the
- dnl resulting binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode DIR into the resulting
- dnl binary.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $found_dir"
- fi
- else
- dnl Rely on "-L$found_dir".
- dnl But don't add it if it's already contained in the LDFLAGS
- dnl or the already constructed $LIBNAME
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$found_dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
- fi
- if test "$acl_hardcode_minus_L" != no; then
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
- else
- dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
- dnl here, because this doesn't fit in flags passed to the
- dnl compiler. So give up. No hardcoding. This affects only
- dnl very old systems.
- dnl FIXME: Not sure whether we should use
- dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
- dnl here.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- fi
- else
- if test "X$found_a" != "X"; then
- dnl Linking with a static library.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
- else
- dnl We shouldn't come here, but anyway it's good to have a
- dnl fallback.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
- fi
- fi
- dnl Assume the include files are nearby.
- additional_includedir=
- case "$found_dir" in
- */$acl_libdirstem | */$acl_libdirstem/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = '$1'; then
- LIB[]NAME[]_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- esac
- if test "X$additional_includedir" != "X"; then
- dnl Potentially add $additional_includedir to $INCNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's /usr/local/include and we are using GCC on Linux,
- dnl 3. if it's already present in $CPPFLAGS or the already
- dnl constructed $INCNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- for x in $CPPFLAGS $INC[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $INCNAME.
- INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- fi
- dnl Look for dependencies.
- if test -n "$found_la"; then
- dnl Read the .la file. It defines the variables
- dnl dlname, library_names, old_library, dependency_libs, current,
- dnl age, revision, installed, dlopen, dlpreopen, libdir.
- save_libdir="$libdir"
- case "$found_la" in
- */* | *\\*) . "$found_la" ;;
- *) . "./$found_la" ;;
- esac
- libdir="$save_libdir"
- dnl We use only dependency_libs.
- for dep in $dependency_libs; do
- case "$dep" in
- -L*)
- additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 3. if it's already present in $LDFLAGS or the already
- dnl constructed $LIBNAME,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
- haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- haveit=
- for x in $LDFLAGS $LIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LIBNAME.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- haveit=
- for x in $LDFLAGS $LTLIB[]NAME; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LTLIBNAME.
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- ;;
- -R*)
- dir=`echo "X$dep" | sed -e 's/^X-R//'`
- if test "$enable_rpath" != no; then
- dnl Potentially add DIR to rpathdirs.
- dnl The rpathdirs will be appended to $LIBNAME at the end.
- haveit=
- for x in $rpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- rpathdirs="$rpathdirs $dir"
- fi
- dnl Potentially add DIR to ltrpathdirs.
- dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
- haveit=
- for x in $ltrpathdirs; do
- if test "X$x" = "X$dir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- ltrpathdirs="$ltrpathdirs $dir"
- fi
- fi
- ;;
- -l*)
- dnl Handle this in the next round.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
- ;;
- *.la)
- dnl Handle this in the next round. Throw away the .la's
- dnl directory; it is already contained in a preceding -L
- dnl option.
- names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
- ;;
- *)
- dnl Most likely an immediate library name.
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
- ;;
- esac
- done
- fi
- else
- dnl Didn't find the library; assume it is in the system directories
- dnl known to the linker and runtime loader. (All the system
- dnl directories known to the linker should also be known to the
- dnl runtime loader, otherwise the system is severely misconfigured.)
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
- fi
- fi
- fi
- done
- done
- if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user must
- dnl pass all path elements in one option. We can arrange that for a
- dnl single library, but not when more than one $LIBNAMEs are used.
- alldirs=
- for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
- done
- dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- else
- dnl The -rpath options are cumulative.
- for found_dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
- done
- fi
- fi
- if test "X$ltrpathdirs" != "X"; then
- dnl When using libtool, the option that works for both libraries and
- dnl executables is -R. The -R options are cumulative.
- for found_dir in $ltrpathdirs; do
- LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
- done
- fi
- popdef([P_A_C_K])
- popdef([PACKLIBS])
- popdef([PACKUP])
- popdef([PACK])
- popdef([NAME])
-])
-
-dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
-dnl unless already present in VAR.
-dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
-dnl contains two or three consecutive elements that belong together.
-AC_DEFUN([AC_LIB_APPENDTOVAR],
-[
- for element in [$2]; do
- haveit=
- for x in $[$1]; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X$element"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- [$1]="${[$1]}${[$1]:+ }$element"
- fi
- done
-])
-
-dnl For those cases where a variable contains several -L and -l options
-dnl referring to unknown libraries and directories, this macro determines the
-dnl necessary additional linker options for the runtime path.
-dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
-dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
-dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
-dnl otherwise linking without libtool is assumed.
-AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
-[
- AC_REQUIRE([AC_LIB_RPATH])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- $1=
- if test "$enable_rpath" != no; then
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
- dnl Use an explicit option to hardcode directories into the resulting
- dnl binary.
- rpathdirs=
- next=
- for opt in $2; do
- if test -n "$next"; then
- dir="$next"
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next=
- else
- case $opt in
- -L) next=yes ;;
- -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
- dnl No need to hardcode the standard /usr/lib.
- if test "X$dir" != "X/usr/$acl_libdirstem" \
- && test "X$dir" != "X/usr/$acl_libdirstem2"; then
- rpathdirs="$rpathdirs $dir"
- fi
- next= ;;
- *) next= ;;
- esac
- fi
- done
- if test "X$rpathdirs" != "X"; then
- if test -n ""$3""; then
- dnl libtool is used for linking. Use -R options.
- for dir in $rpathdirs; do
- $1="${$1}${$1:+ }-R$dir"
- done
- else
- dnl The linker is used for linking directly.
- if test -n "$acl_hardcode_libdir_separator"; then
- dnl Weird platform: only the last -rpath option counts, the user
- dnl must pass all path elements in one option.
- alldirs=
- for dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
- done
- acl_save_libdir="$libdir"
- libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="$flag"
- else
- dnl The -rpath options are cumulative.
- for dir in $rpathdirs; do
- acl_save_libdir="$libdir"
- libdir="$dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
- libdir="$acl_save_libdir"
- $1="${$1}${$1:+ }$flag"
- done
- fi
- fi
- fi
- fi
- fi
- AC_SUBST([$1])
-])
+++ /dev/null
-# lib-prefix.m4 serial 7 (gettext-0.18)
-dnl Copyright (C) 2001-2005, 2008-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl From Bruno Haible.
-
-dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
-dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
-dnl require excessive bracketing.
-ifdef([AC_HELP_STRING],
-[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
-[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
-
-dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
-dnl to access previously installed libraries. The basic assumption is that
-dnl a user will want packages to use other packages he previously installed
-dnl with the same --prefix option.
-dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
-dnl libraries, but is otherwise very convenient.
-AC_DEFUN([AC_LIB_PREFIX],
-[
- AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
- AC_REQUIRE([AC_PROG_CC])
- AC_REQUIRE([AC_CANONICAL_HOST])
- AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
- AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
- dnl By default, look in $includedir and $libdir.
- use_additional=yes
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- AC_LIB_ARG_WITH([lib-prefix],
-[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
- --without-lib-prefix don't search for libraries in includedir and libdir],
-[
- if test "X$withval" = "Xno"; then
- use_additional=no
- else
- if test "X$withval" = "X"; then
- AC_LIB_WITH_FINAL_PREFIX([
- eval additional_includedir=\"$includedir\"
- eval additional_libdir=\"$libdir\"
- ])
- else
- additional_includedir="$withval/include"
- additional_libdir="$withval/$acl_libdirstem"
- fi
- fi
-])
- if test $use_additional = yes; then
- dnl Potentially add $additional_includedir to $CPPFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/include,
- dnl 2. if it's already present in $CPPFLAGS,
- dnl 3. if it's /usr/local/include and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_includedir" != "X/usr/include"; then
- haveit=
- for x in $CPPFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-I$additional_includedir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_includedir" = "X/usr/local/include"; then
- if test -n "$GCC"; then
- case $host_os in
- linux* | gnu* | k*bsd*-gnu) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_includedir"; then
- dnl Really add $additional_includedir to $CPPFLAGS.
- CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
- fi
- fi
- fi
- fi
- dnl Potentially add $additional_libdir to $LDFLAGS.
- dnl But don't add it
- dnl 1. if it's the standard /usr/lib,
- dnl 2. if it's already present in $LDFLAGS,
- dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
- dnl 4. if it doesn't exist as a directory.
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
- haveit=
- for x in $LDFLAGS; do
- AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
- if test "X$x" = "X-L$additional_libdir"; then
- haveit=yes
- break
- fi
- done
- if test -z "$haveit"; then
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
- if test -n "$GCC"; then
- case $host_os in
- linux*) haveit=yes;;
- esac
- fi
- fi
- if test -z "$haveit"; then
- if test -d "$additional_libdir"; then
- dnl Really add $additional_libdir to $LDFLAGS.
- LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
- fi
- fi
- fi
- fi
- fi
-])
-
-dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
-dnl acl_final_exec_prefix, containing the values to which $prefix and
-dnl $exec_prefix will expand at the end of the configure script.
-AC_DEFUN([AC_LIB_PREPARE_PREFIX],
-[
- dnl Unfortunately, prefix and exec_prefix get only finally determined
- dnl at the end of configure.
- if test "X$prefix" = "XNONE"; then
- acl_final_prefix="$ac_default_prefix"
- else
- acl_final_prefix="$prefix"
- fi
- if test "X$exec_prefix" = "XNONE"; then
- acl_final_exec_prefix='${prefix}'
- else
- acl_final_exec_prefix="$exec_prefix"
- fi
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
-dnl variables prefix and exec_prefix bound to the values they will have
-dnl at the end of the configure script.
-AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
-[
- acl_save_prefix="$prefix"
- prefix="$acl_final_prefix"
- acl_save_exec_prefix="$exec_prefix"
- exec_prefix="$acl_final_exec_prefix"
- $1
- exec_prefix="$acl_save_exec_prefix"
- prefix="$acl_save_prefix"
-])
-
-dnl AC_LIB_PREPARE_MULTILIB creates
-dnl - a variable acl_libdirstem, containing the basename of the libdir, either
-dnl "lib" or "lib64" or "lib/64",
-dnl - a variable acl_libdirstem2, as a secondary possible value for
-dnl acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
-dnl "lib/amd64".
-AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
-[
- dnl There is no formal standard regarding lib and lib64.
- dnl On glibc systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
- dnl the compiler's default mode by looking at the compiler's library search
- dnl path. If at least one of its elements ends in /lib64 or points to a
- dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
- dnl Otherwise we use the default, namely "lib".
- dnl On Solaris systems, the current practice is that on a system supporting
- dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
- dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
- dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
- AC_REQUIRE([AC_CANONICAL_HOST])
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
- dnl <http://docs.sun.com/app/docs/doc/816-5138/dev-env?l=en&a=view>.
- dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
- dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
- dnl symlink is missing, so we set acl_libdirstem2 too.
- AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
- [AC_EGREP_CPP([sixtyfour bits], [
-#ifdef _LP64
-sixtyfour bits
-#endif
- ], [gl_cv_solaris_64bit=yes], [gl_cv_solaris_64bit=no])
- ])
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
- esac
- fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
-])
+++ /dev/null
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 57 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
- [m4_default([$3],
- [m4_fatal([Libtool version $1 or higher is required],
- 63)])],
- [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
- *\ * | *\ *)
- AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
-_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
-dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_WITH_SYSROOT])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- _LT_PATH_MAGIC
- fi
- ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-## ------------------------------------- ##
-## Accumulate code for creating libtool. ##
-## ------------------------------------- ##
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
- [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
- [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
- [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
- [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
- [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-## ------------------------ ##
-## FIXME: Eliminate VARNAME ##
-## ------------------------ ##
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME. Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
- [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
- [m4_ifval([$1], [$1], [$2])])
- lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
- m4_ifval([$4],
- [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
- lt_dict_add_subkey([lt_decl_dict], [$2],
- [tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
- [0], [m4_fatal([$0: too few arguments: $#])],
- [1], [m4_fatal([$0: too few arguments: $#: $1])],
- [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
- [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
- [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
- m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
- m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
- m4_if([$2], [],
- m4_quote(lt_decl_varnames),
- m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
- lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly. In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
- [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-# # Some comment about what VAR is for.
-# visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
- [description])))[]dnl
-m4_pushdef([_libtool_name],
- m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
- [0], [_libtool_name=[$]$1],
- [1], [_libtool_name=$lt_[]$1],
- [2], [_libtool_name=$lt_[]$1],
- [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
- m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
- dnl If the libtool generation code has been placed in $CONFIG_LT,
- dnl instead of duplicating it all over again into config.status,
- dnl then we will have config.status run $CONFIG_LT later, so it
- dnl needs to know what name is stored there:
- [AC_CONFIG_COMMANDS([libtool],
- [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
- dnl If the libtool generation code is destined for config.status,
- dnl expand the accumulated commands and init code now:
- [AC_CONFIG_COMMANDS([libtool],
- [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
- case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
- *[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
- case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
- *[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script. The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-lt_cl_silent=false
-exec AS_MESSAGE_LOG_FD>>config.log
-{
- echo
- AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2011 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
- case $[1] in
- --version | --v* | -V )
- echo "$lt_cl_version"; exit 0 ;;
- --help | --h* | -h )
- echo "$lt_cl_help"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --quiet | --q* | --silent | --s* | -q )
- lt_cl_silent=: ;;
-
- -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
- *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
- esac
- shift
-done
-
-if $lt_cl_silent; then
- exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure. Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
- lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars. Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
- m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
- m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
- # commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
-
- cfgfile="${ofile}T"
- trap "$RM \"$cfgfile\"; exit 1" 1 2 15
- $RM "$cfgfile"
-
- cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
- case $host_os in
- aix3*)
- cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-_LT_EOF
- ;;
- esac
-
- _LT_PROG_LTMAIN
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- _LT_PROG_REPLACE_SHELLFNS
-
- mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
- PACKAGE='$PACKAGE'
- VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
- RM='$RM'
- ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-# autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
- [C], [_LT_LANG(C)],
- [C++], [_LT_LANG(CXX)],
- [Go], [_LT_LANG(GO)],
- [Java], [_LT_LANG(GCJ)],
- [Fortran 77], [_LT_LANG(F77)],
- [Fortran], [_LT_LANG(FC)],
- [Windows Resource], [_LT_LANG(RC)],
- [m4_ifdef([_LT_LANG_]$1[_CONFIG],
- [_LT_LANG($1)],
- [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
- [LT_SUPPORTED_TAG([$1])dnl
- m4_append([_LT_TAGS], [$1 ])dnl
- m4_define([_LT_LANG_]$1[_enabled], [])dnl
- _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-m4_ifndef([AC_PROG_GO], [
-############################################################
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_GO. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-############################################################
-m4_defun([AC_PROG_GO],
-[AC_LANG_PUSH(Go)dnl
-AC_ARG_VAR([GOC], [Go compiler command])dnl
-AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
-_AC_ARG_VAR_LDFLAGS()dnl
-AC_CHECK_TOOL(GOC, gccgo)
-if test -z "$GOC"; then
- if test -n "$ac_tool_prefix"; then
- AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
- fi
-fi
-if test -z "$GOC"; then
- AC_CHECK_PROG(GOC, gccgo, gccgo, false)
-fi
-])#m4_defun
-])#m4_ifndef
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [LT_LANG(CXX)],
- [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
- [LT_LANG(F77)],
- [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
- [LT_LANG(FC)],
- [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [LT_LANG(GCJ)],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [LT_LANG(GCJ)],
- [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
- [LT_LANG(GCJ)],
- [m4_ifdef([AC_PROG_GCJ],
- [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
- m4_ifdef([A][M_PROG_GCJ],
- [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
- m4_ifdef([LT_PROG_GCJ],
- [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([AC_PROG_GO],
- [LT_LANG(GO)],
- [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
- [LT_LANG(RC)],
- [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
- case $host_os in
- rhapsody* | darwin*)
- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
- AC_CHECK_TOOL([LIPO], [lipo], [:])
- AC_CHECK_TOOL([OTOOL], [otool], [:])
- AC_CHECK_TOOL([OTOOL64], [otool64], [:])
- _LT_DECL([], [DSYMUTIL], [1],
- [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
- _LT_DECL([], [NMEDIT], [1],
- [Tool to change global to local symbols on Mac OS X])
- _LT_DECL([], [LIPO], [1],
- [Tool to manipulate fat objects and archives on Mac OS X])
- _LT_DECL([], [OTOOL], [1],
- [ldd/readelf like tool for Mach-O binaries on Mac OS X])
- _LT_DECL([], [OTOOL64], [1],
- [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
- [lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- rm -rf libconftest.dylib*
- echo "int foo(void){return 1;}" > conftest.c
- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
- _lt_result=$?
- # If there is a non-empty error log, and "single_module"
- # appears in it, assume the flag caused a linker warning
- if test -s conftest.err && $GREP single_module conftest.err; then
- cat conftest.err >&AS_MESSAGE_LOG_FD
- # Otherwise, if the output was created with a 0 exit code from
- # the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
- lt_cv_apple_cc_single_mod=yes
- else
- cat conftest.err >&AS_MESSAGE_LOG_FD
- fi
- rm -rf libconftest.dylib*
- rm -f conftest.*
- fi])
-
- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
- [lt_cv_ld_exported_symbols_list],
- [lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [lt_cv_ld_exported_symbols_list=yes],
- [lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
- ])
-
- AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
- [lt_cv_ld_force_load=no
- cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
- echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
- $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
- echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
- $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
- cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
- $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
- _lt_result=$?
- if test -s conftest.err && $GREP force_load conftest.err; then
- cat conftest.err >&AS_MESSAGE_LOG_FD
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
- lt_cv_ld_force_load=yes
- else
- cat conftest.err >&AS_MESSAGE_LOG_FD
- fi
- rm -f conftest.err libconftest.a conftest conftest.c
- rm -rf conftest.dSYM
- ])
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*) # darwin 5.x on
- # if running on 10.5 or later, the deployment target defaults
- # to the OS version, if on x86, and 10.4, the deployment
- # target defaults to 10.4. Don't you love it?
- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- esac
- ;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
- fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
- else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
- _lt_dsymutil='~$DSYMUTIL $lib || :'
- else
- _lt_dsymutil=
- fi
- ;;
- esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES([TAG])
-# ---------------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
- m4_require([_LT_REQUIRED_DARWIN_CHECKS])
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_automatic, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
- m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
- [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
- fi
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
- case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
- *) _lt_dar_can_shared=$GCC ;;
- esac
- if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
- fi
-],[])
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
-# ----------------------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-# Store the results from the different compilers for each TAGNAME.
-# Allow to override them for all tags through lt_cv_aix_libpath.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
- aix_libpath=$lt_cv_aix_libpath
-else
- AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
- [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
- lt_aix_libpath_sed='[
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\([^ ]*\) *$/\1/
- p
- }
- }]'
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- # Check for a 64-bit object if we didn't find anything.
- if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- fi],[])
- if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
- fi
- ])
- aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
-fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='printf %s\n'
-else
- # Use this function as a fallback that always works.
- func_fallback_echo ()
- {
- eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
- }
- ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-
-case "$ECHO" in
- printf*) AC_MSG_RESULT([printf]) ;;
- print*) AC_MSG_RESULT([print -r]) ;;
- *) AC_MSG_RESULT([cat]) ;;
-esac
-
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
- test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
- ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
- ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
- ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
- PATH=/empty FPATH=/empty; export PATH FPATH
- test "X`printf %s $ECHO`" = "X$ECHO" \
- || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
-
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_WITH_SYSROOT
-# ----------------
-AC_DEFUN([_LT_WITH_SYSROOT],
-[AC_MSG_CHECKING([for sysroot])
-AC_ARG_WITH([sysroot],
-[ --with-sysroot[=DIR] Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).],
-[], [with_sysroot=no])
-
-dnl lt_sysroot will always be passed unquoted. We quote it here
-dnl in case the user passed a directory name.
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
- if test "$GCC" = yes; then
- lt_sysroot=`$CC --print-sysroot 2>/dev/null`
- fi
- ;; #(
- /*)
- lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
- ;; #(
- no|'')
- ;; #(
- *)
- AC_MSG_RESULT([${with_sysroot}])
- AC_MSG_ERROR([The sysroot must be an absolute path.])
- ;;
-esac
-
- AC_MSG_RESULT([${lt_sysroot:-no}])
-_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AS_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- case `/usr/bin/file conftest.o` in
- *x86-64*)
- LD="${LD-ld} -m elf32_x86_64"
- ;;
- *)
- LD="${LD-ld} -m elf_i386"
- ;;
- esac
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*|s390*-*tpf*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*)
- case $host in
- i?86-*-solaris*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- sparc*-*-solaris*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
- if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
- fi
- ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_PROG_AR
-# -----------
-m4_defun([_LT_PROG_AR],
-[AC_CHECK_TOOLS(AR, [ar], false)
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
-
-AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
- [lt_cv_ar_at_file=no
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
- [echo conftest.$ac_objext > conftest.lst
- lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
- AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -eq 0; then
- # Ensure the archiver fails upon bogus file names.
- rm -f conftest.$ac_objext libconftest.a
- AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -ne 0; then
- lt_cv_ar_at_file=@
- fi
- fi
- rm -f conftest.* libconftest.a
- ])
- ])
-
-if test "x$lt_cv_ar_at_file" = xno; then
- archiver_list_spec=
-else
- archiver_list_spec=$lt_cv_ar_at_file
-fi
-_LT_DECL([], [archiver_list_spec], [1],
- [How to feed a file listing to the archiver])
-])# _LT_PROG_AR
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[_LT_PROG_AR
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
- [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
-fi
-
-case $host_os in
- darwin*)
- lock_old_archive_extraction=yes ;;
- *)
- lock_old_archive_extraction=no ;;
-esac
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
- [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
- [Whether to use a lock for old archive extraction])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- fi
- $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
- m4_if([$5], , :, [$5])
-else
- m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
- m4_if([$4], , :, [$4])
-else
- m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw* | cegcc*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- mint*)
- # On MiNT this can take a long time and run out of memory.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- os2*)
- # The test takes a long time on OS/2.
- lt_cv_sys_max_cmd_len=8192
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len" && \
- test undefined != "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- # Make teststring a little bigger before we do anything with it.
- # a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
- teststring=$teststring$teststring
- done
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
- = "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- # Only check the string length outside the loop.
- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
- teststring=
- # Add a significant safety factor because C++ compilers can tack on
- # massive amounts of additional arguments before passing them to the
- # linker. It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
- [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else
- {
- if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- else puts (dlerror ());
- }
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- return status;
-}]
-_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
- esac
- else :
- # compilation failed
- $3
- fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
- ;;
-
- *)
- AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
- [AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
- [AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
- [AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
- [AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
- ])
- ])
- ])
- ])
- ])
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- AC_CACHE_CHECK([whether a program can dlopen itself],
- lt_cv_dlopen_self, [dnl
- _LT_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
- [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
- [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
- [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $RM -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $RM conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
- $RM out/* && rmdir out
- cd ..
- $RM -r conftest
- $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
- [Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $RM conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
- [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
- test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
- # We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_TAGVAR(hardcode_action, $1)=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_TAGVAR(hardcode_action, $1)=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
- [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
- esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
- [], [
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
- case $lt_search_path_spec in
- *\;*)
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
- ;;
- *)
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
- ;;
- esac
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
- # AWK program above erroneously prepends '/' to C:/dos/paths
- # for these hosts.
- case $host_os in
- mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
- esac
- sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[[4-9]]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- case $host_cpu in
- powerpc)
- # Since July 2007 AmigaOS4 officially supports .so libraries.
- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- ;;
- m68k)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
- esac
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[[45]]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$cc_basename in
- yes,*)
- # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname~
- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
- fi'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
- ;;
- mingw* | cegcc*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- ;;
-
- *,cl*)
- # Native MSVC
- libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
-
- case $build_os in
- mingw*)
- sys_lib_search_path_spec=
- lt_save_ifs=$IFS
- IFS=';'
- for lt_path in $LIB
- do
- IFS=$lt_save_ifs
- # Let DOS variable expansion print the short 8.3 style file name.
- lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
- sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
- done
- IFS=$lt_save_ifs
- # Convert to MSYS style.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
- ;;
- cygwin*)
- # Convert to unix form, then to dos form, then back to unix form
- # but this time dos style (no spaces!) so that the unix form looks
- # like /cygdrive/c/PROGRA~1:/cygdr...
- sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
- sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
- sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- ;;
- *)
- sys_lib_search_path_spec="$LIB"
- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # FIXME: find the short name or the path components, as spaces are
- # common. (e.g. "Program Files" -> "PROGRA~1")
- ;;
- esac
-
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
- dynamic_linker='Win32 link.exe'
- ;;
-
- *)
- # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- dynamic_linker='Win32 ld.exe'
- ;;
- esac
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[23]].*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2.*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-haiku*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
- postinstall_cmds='chmod 555 $lib'
- # or fails outright, so override atomically:
- install_override_mode=555
- ;;
-
-interix[[3-9]]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux # correct to gnu/linux during the next big refactor
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
-
- # Some binutils ld are patched to set DT_RUNPATH
- AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
- [lt_cv_shlibpath_overrides_runpath=no
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
- [lt_cv_shlibpath_overrides_runpath=yes])])
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
- ])
- shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
-
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsdelf*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='NetBSD ld.elf_so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-*nto* | *qnx*)
- version_type=qnx
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='ldqnx.so'
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-tpf*)
- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-uts4*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-_LT_DECL([], [variables_saved_for_relink], [1],
- [Variables whose values should be saved in libtool wrapper scripts and
- restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
- [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
- [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
- [[List of archive names. First name is the real one, the rest are links.
- The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
- [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [install_override_mode], [1],
- [Permission mode override for installation of shared libraries])
-_LT_DECL([], [postinstall_cmds], [2],
- [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
- [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
- [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
- [[As "finish_cmds", except a single script fragment to be evaled but
- not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
- [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
- [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="m4_if([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
- [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
-
-AC_ARG_WITH([gnu-ld],
- [AS_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])dnl
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
-
-# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
- reload_cmds=false
- fi
- ;;
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_TAGDECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- # Keep this pattern in sync with the one in func_win32_libid.
- lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-cegcc*)
- # use the weaker test based on 'objdump'. See mingw*.
- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-haiku*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[[3-9]]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-*nto* | *qnx*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-tpf*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-
-file_magic_glob=
-want_nocaseglob=no
-if test "$build" = "$host"; then
- case $host_os in
- mingw* | pw32*)
- if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
- want_nocaseglob=yes
- else
- file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
- fi
- ;;
- esac
-fi
-
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-_LT_DECL([], [deplibs_check_method], [1],
- [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
- [Command to use when deplibs_check_method = "file_magic"])
-_LT_DECL([], [file_magic_glob], [1],
- [How to find potential files when deplibs_check_method = "file_magic"])
-_LT_DECL([], [want_nocaseglob], [1],
- [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
-else
- # Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$DUMPBIN"; then :
- # Let the user override the test.
- else
- AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
- *COFF*)
- DUMPBIN="$DUMPBIN -symbols"
- ;;
- *)
- DUMPBIN=:
- ;;
- esac
- fi
- AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
- fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
- [lt_cv_nm_interface="BSD nm"
- echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$ac_compile" 2>conftest.err)
- cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
- cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
- cat conftest.out >&AS_MESSAGE_LOG_FD
- if $GREP 'External.*some_variable' conftest.out > /dev/null; then
- lt_cv_nm_interface="MS dumpbin"
- fi
- rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-# --------------------------------
-# how to determine the name of the shared library
-# associated with a specific link library.
-# -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-m4_require([_LT_DECL_DLLTOOL])
-AC_CACHE_CHECK([how to associate runtime and link libraries],
-lt_cv_sharedlib_from_linklib_cmd,
-[lt_cv_sharedlib_from_linklib_cmd='unknown'
-
-case $host_os in
-cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
- case `$DLLTOOL --help 2>&1` in
- *--identify-strict*)
- lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
- ;;
- *)
- lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
- ;;
- esac
- ;;
-*)
- # fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
- ;;
-esac
-])
-sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-
-_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
- [Command to associate shared and link libraries])
-])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-
-
-# _LT_PATH_MANIFEST_TOOL
-# ----------------------
-# locate the manifest tool
-m4_defun([_LT_PATH_MANIFEST_TOOL],
-[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
-test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
- [lt_cv_path_mainfest_tool=no
- echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
- $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
- cat conftest.err >&AS_MESSAGE_LOG_FD
- if $GREP 'Manifest Tool' conftest.out > /dev/null; then
- lt_cv_path_mainfest_tool=yes
- fi
- rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
- MANIFEST_TOOL=:
-fi
-_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
-])# _LT_PATH_MANIFEST_TOOL
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- case $cc_basename in
- nvcc*)
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
- esac
-
- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
- [Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32* | cegcc*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
- # Also find C++ and __fastcall symbols from MSVC++,
- # which start with @ or ?.
- lt_cv_sys_global_symbol_pipe="$AWK ['"\
-" {last_section=section; section=\$ 3};"\
-" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-" \$ 0!~/External *\|/{next};"\
-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-" ' prfx=^$ac_symprfx]"
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
- lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
- relocations are performed -- see ld's documentation on pseudo-relocs. */
-# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data. */
-# define LT@&t@_DLSYM_CONST
-#else
-# define LT@&t@_DLSYM_CONST const
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
- cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols. */
-LT@&t@_DLSYM_CONST struct {
- const char *name;
- void *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
- { "@PROGRAM@", (void *) 0 },
-_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
- cat <<\_LT_EOF >> conftest.$ac_ext
- {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_globsym_save_LIBS=$LIBS
- lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS=$lt_globsym_save_LIBS
- CFLAGS=$lt_globsym_save_CFLAGS
- else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-
-# Response file support.
-if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- nm_file_list_spec='@'
-elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
- nm_file_list_spec='@'
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
- [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
- [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
- [lt_cv_sys_global_symbol_to_c_name_address], [1],
- [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
- [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
- [Transform the output of nm in a C name address pair when lib prefix is needed])
-_LT_DECL([], [nm_file_list_spec], [1],
- [Specify filename containing input files for $NM])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-m4_if([$1], [CXX], [
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- m68k)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- esac
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | cygwin* | os2* | pw32* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- haiku*)
- # PIC is the default for Haiku.
- # The "-static" flag exists, but is broken.
- _LT_TAGVAR(lt_prog_compiler_static, $1)=
- ;;
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
- # sets the default TLS model and affects inlining.
- case $host_cpu in
- hppa*64*)
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
- *qnx* | *nto*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix[[4-9]]*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- mingw* | cygwin* | os2* | pw32* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- fi
- ;;
- aCC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- icpc* )
- # Intel C++, used to be incompatible with GCC.
- # ICC 10 doesn't accept -KPIC any more.
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
- # IBM XL 8.0, 9.0 on PPC and BlueGene
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd* | netbsdelf*-gnu)
- ;;
- *qnx* | *nto*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- lcc*)
- # Lucid
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-],
-[
- if test "$GCC" = yes; then
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- m68k)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- esac
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
-
- haiku*)
- # PIC is the default for Haiku.
- # The "-static" flag exists, but is broken.
- _LT_TAGVAR(lt_prog_compiler_static, $1)=
- ;;
-
- hpux*)
- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
- # sets the default TLS model and affects inlining.
- case $host_cpu in
- hppa*64*)
- # +Z the default
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
-
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- enable_shared=no
- ;;
-
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
-
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
-
- case $cc_basename in
- nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
- if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
- fi
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
-
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
-
- hpux9* | hpux10* | hpux11*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC (with -KPIC) is the default.
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
- ecc*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- # icc used to be incompatible with GCC.
- # ICC 10 doesn't accept -KPIC any more.
- icc* | ifort*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- # Lahey Fortran 8.1.
- lf95*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
- ;;
- nagfor*)
- # NAG Fortran compiler
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- ccc*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All Alpha code is PIC.
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- xl* | bgxl* | bgf* | mpixl*)
- # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
- ;;
- *Sun\ F* | *Sun*Fortran*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- *Sun\ C*)
- # Sun C 5.9
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- *Intel*\ [[CF]]*Compiler*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- *Portland\ Group*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
- esac
- ;;
-
- newsos6)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
-
- osf3* | osf4* | osf5*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All OSF/1 code is PIC.
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- rdos*)
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- solaris*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
- esac
- ;;
-
- sunos4*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- unicos*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
-
- uts4*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *)
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-])
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
- ;;
-esac
-
-AC_CACHE_CHECK([for $compiler option to produce PIC],
- [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
- [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
- [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
- [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
- [Additional compiler flags for building library objects])
-
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
- [How to pass a linker flag through the compiler])
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
- [Compiler flag to prevent dynamic linking])
-])# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-m4_defun([_LT_LINKER_SHLIBS],
-[AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-m4_if([$1], [CXX], [
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- case $host_os in
- aix[[4-9]]*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
- cygwin* | mingw* | cegcc*)
- case $cc_basename in
- cl*)
- _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
- ;;
- *)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu | gnu*)
- _LT_TAGVAR(link_all_deplibs, $1)=no
- ;;
- *)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
-], [
- runpath_var=
- _LT_TAGVAR(allow_undefined_flag, $1)=
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(archive_cmds, $1)=
- _LT_TAGVAR(archive_expsym_cmds, $1)=
- _LT_TAGVAR(compiler_needs_object, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(hardcode_automatic, $1)=no
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_TAGVAR(hardcode_minus_L, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(inherit_rpath, $1)=no
- _LT_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_TAGVAR(module_cmds, $1)=
- _LT_TAGVAR(module_expsym_cmds, $1)=
- _LT_TAGVAR(old_archive_from_new_cmds, $1)=
- _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- _LT_TAGVAR(include_expsyms, $1)=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
- extract_expsyms_cmds=
-
- case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- linux* | k*bsd*-gnu | gnu*)
- _LT_TAGVAR(link_all_deplibs, $1)=no
- ;;
- esac
-
- _LT_TAGVAR(ld_shlibs, $1)=yes
-
- # On some targets, GNU ld is compatible enough with the native linker
- # that we're better off using the native interface for both.
- lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
- case $host_os in
- aix*)
- # The AIX port of GNU ld has always aspired to compatibility
- # with the native linker. However, as the warning in the GNU ld
- # block says, versions before 2.19.5* couldn't really create working
- # shared libraries, regardless of the interface used.
- case `$LD -v 2>&1` in
- *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
- *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
- *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- fi
-
- if test "$lt_use_gnu_ld_interface" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>&1` in
- *GNU\ gold*) supports_anon_versioning=yes ;;
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[[3-9]]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.19, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
-
-_LT_EOF
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)=''
- ;;
- m68k)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- ;;
-
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- interix[[3-9]]*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
- tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
- case $cc_basename in
- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
- esac
- fi
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
- tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- lf95*) # Lahey Fortran 8.1
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- tmp_sharedflag='--shared' ;;
- xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
- tmp_sharedflag='-qmkshrobj'
- tmp_addflag= ;;
- nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
- ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
-
- case $cc_basename in
- xlf* | bgf* | bgxlf* | mpixlf*)
- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
-
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=yes
- _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- fi
- ;;
-
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_TAGVAR(archive_cmds, $1)=''
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- _LT_TAGVAR(link_all_deplibs, $1)=no
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
- # We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- else
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)=''
- ;;
- m68k)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- ;;
-
- bsdi[[45]]*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- case $cc_basename in
- cl*)
- # Native MSVC
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='@'
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
- # The linker will not automatically build a static lib if we build a DLL.
- # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
- # Don't use ranlib
- _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
- _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
- ;;
- *)
- # Assume MSVC wrapper
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
- esac
- ;;
-
- darwin* | rhapsody*)
- _LT_DARWIN_LINKER_FEATURES($1)
- ;;
-
- dgux*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2.*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_direct, $1)=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- m4_if($1, [], [
- # Older versions of the 11.00 compiler do not understand -b yet
- # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
- _LT_LINKER_OPTION([if $CC understands -b],
- _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
- [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
- # This should be the same for all languages, so no per-tag cache variable.
- AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
- [lt_cv_irix_exported_symbol],
- [save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- AC_LINK_IFELSE(
- [AC_LANG_SOURCE(
- [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
- [C++], [[int foo (void) { return 0; }]],
- [Fortran 77], [[
- subroutine foo
- end]],
- [Fortran], [[
- subroutine foo
- end]])])],
- [lt_cv_irix_exported_symbol=yes],
- [lt_cv_irix_exported_symbol=no])
- LDFLAGS="$save_LDFLAGS"])
- if test "$lt_cv_irix_exported_symbol" = yes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
- fi
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(inherit_rpath, $1)=yes
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- netbsd* | netbsdelf*-gnu)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- newsos6)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *nto* | *qnx*)
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- os2*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- solaris*)
- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
- wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
- ;;
- *)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- ;;
- esac
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_TAGVAR(hardcode_direct, $1)=no
- ;;
- motorola)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4.3*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- _LT_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
-
- if test x$host_vendor = xsni; then
- case $host in
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
- ;;
- esac
- fi
- fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
-
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
- [The commands to extract the exported symbol list from a shared archive])
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_CACHE_CHECK([whether -lc should be explicitly linked in],
- [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
- [$RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
- _LT_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
- then
- lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- ])
- _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
- ;;
- esac
- fi
- ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
- [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
- [enable_shared_with_static_runtimes], [0],
- [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
- [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
- [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
- [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
- [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
- [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
- [Commands used to build a loadable module if different from building
- a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
- [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
- [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
- [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
- [Flag to hardcode $libdir into a binary during linking.
- This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
- [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
- DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
- DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
- library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
- [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
- into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
- [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
- into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
- [Set to "yes" if building a shared library automatically hardcodes DIR
- into the library and all subsequent libraries and executables linked
- against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
- [Set to yes if linker adds runtime paths of dependent libraries
- to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
- [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [always_export_symbols], [0],
- [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
- [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
- [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
- [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
- [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [postlink_cmds], [2],
- [Commands necessary for finishing linking programs])
-_LT_TAGDECL([], [file_list_spec], [1],
- [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
- LT_SYS_DLOPEN_SELF
- _LT_CMD_STRIPLIB
-
- # Report which library types will actually be built
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
-
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
-
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
-
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
-
- _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-else
- _lt_caught_CXX_error=yes
-fi
-
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="int some_variable = 0;"
-
- # Code to be used in simple link tests
- lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
-
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
-
- # Allow CC to be a program name with arguments.
- lt_save_CC=$CC
- lt_save_CFLAGS=$CFLAGS
- lt_save_LD=$LD
- lt_save_GCC=$GCC
- GCC=$GXX
- lt_save_with_gnu_ld=$with_gnu_ld
- lt_save_path_LD=$lt_cv_path_LD
- if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
- else
- $as_unset lt_cv_prog_gnu_ld
- fi
- if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
- else
- $as_unset lt_cv_path_LD
- fi
- test -z "${LDCXX+set}" || LD=$LDCXX
- CC=${CXX-"c++"}
- CFLAGS=$CXXFLAGS
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
-
- if test -n "$compiler"; then
- # We don't want -fno-exception when compiling C++ code, so set the
- # no_builtin_flag separately
- if test "$GXX" = yes; then
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
- else
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
- fi
-
- if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- LT_PATH_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" |
- $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
- else
- GXX=no
- with_gnu_ld=no
- wlarc=
- fi
-
- # PORTME: fill in a description of your system's C++ link characteristics
- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
- _LT_TAGVAR(ld_shlibs, $1)=yes
- case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_TAGVAR(archive_cmds, $1)=''
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to
- # export.
- _LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty
- # executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
- # We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- else
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- case $GXX,$cc_basename in
- ,cl* | no,cl*)
- # Native MSVC
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='@'
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
- # The linker will not automatically build a static lib if we build a DLL.
- # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- # Don't use ranlib
- _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
- _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
- ;;
- *)
- # g++
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- darwin* | rhapsody*)
- _LT_DARWIN_LINKER_FEATURES($1)
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- freebsd2.*)
- # C++ shared libraries reported to be fairly broken before
- # switch to ELF
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- freebsd-elf*)
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
-
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_TAGVAR(ld_shlibs, $1)=yes
- ;;
-
- haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- interix[[3-9]]*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
- fi
- fi
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(inherit_rpath, $1)=yes
- ;;
-
- linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc* | ecpc* )
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- case `$CC -V` in
- *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- *) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- esac
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
- ;;
- xl* | mpixl* | bgxl*)
- # IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='func_echo_all'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
-
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
-
- *nto* | *qnx*)
- _LT_TAGVAR(ld_shlibs, $1)=yes
- ;;
-
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd=func_echo_all
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- case $host in
- osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
- *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
- esac
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- case $host in
- osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- ;;
- *)
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- ;;
- esac
-
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- case $host in
- osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- esac
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- psos*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- ;;
- esac
- _LT_TAGVAR(link_all_deplibs, $1)=yes
-
- output_verbose_link_cmd='func_echo_all'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
- fi
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
- '"$_LT_TAGVAR(old_archive_cmds, $1)"
- _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
- '"$_LT_TAGVAR(reload_cmds, $1)"
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
-
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
-
- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
-
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_SYS_HIDDEN_LIBDEPS($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
- fi # test -n "$compiler"
-
- CC=$lt_save_CC
- CFLAGS=$lt_save_CFLAGS
- LDCXX=$LD
- LD=$lt_save_LD
- GCC=$lt_save_GCC
- with_gnu_ld=$lt_save_with_gnu_ld
- lt_cv_path_LDCXX=$lt_cv_path_LD
- lt_cv_path_LD=$lt_save_path_LD
- lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
- lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
-
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
-
-
-# _LT_FUNC_STRIPNAME_CNF
-# ----------------------
-# func_stripname_cnf prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-#
-# This function is identical to the (non-XSI) version of func_stripname,
-# except this one can be used by m4 code that may be executed by configure,
-# rather than the libtool script.
-m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
-AC_REQUIRE([_LT_DECL_SED])
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
-func_stripname_cnf ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname_cnf
-])# _LT_FUNC_STRIPNAME_CNF
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
-
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
- subroutine foo
- implicit none
- integer a
- a=0
- return
- end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-_LT_EOF
-], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
-package foo
-func foo() {
-}
-_LT_EOF
-])
-
-_lt_libdeps_save_CFLAGS=$CFLAGS
-case "$CC $CFLAGS " in #(
-*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
-*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
-*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
-esac
-
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
- prev=$p
- continue
- fi
-
- # Expand the sysroot to ease extracting the directories later.
- if test -z "$prev"; then
- case $p in
- -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
- -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
- -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
- esac
- fi
- case $p in
- =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
- esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
- -L | -R)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- prev=
- ;;
-
- *.lto.$objext) ;; # Ignore GCC LTO objects
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$RM -f confest.$objext
-CFLAGS=$_lt_libdeps_save_CFLAGS
-
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_TAGVAR(predep_objects,$1)=
- _LT_TAGVAR(postdep_objects,$1)=
- _LT_TAGVAR(postdeps,$1)=
- ;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
- [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
- [Dependencies to place before and after the objects being linked to
- create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
- [The library search path used internally by the compiler when linking
- a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
- _lt_disable_F77=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
- # Code to be used in simple link tests
- lt_simple_link_test_code="\
- program t
- end
-"
-
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
-
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
-
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- lt_save_CFLAGS=$CFLAGS
- CC=${F77-"f77"}
- CFLAGS=$FFLAGS
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
- GCC=$G77
- if test -n "$compiler"; then
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
-
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
-
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
-
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
-
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
-
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
- fi # test -n "$compiler"
-
- GCC=$lt_save_GCC
- CC="$lt_save_CC"
- CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
-
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_LANG_PUSH(Fortran)
-
-if test -z "$FC" || test "X$FC" = "Xno"; then
- _lt_disable_FC=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
-
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
- # Code to be used in simple link tests
- lt_simple_link_test_code="\
- program t
- end
-"
-
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
-
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
-
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- lt_save_CFLAGS=$CFLAGS
- CC=${FC-"f95"}
- CFLAGS=$FCFLAGS
- compiler=$CC
- GCC=$ac_cv_fc_compiler_gnu
-
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
-
- if test -n "$compiler"; then
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
-
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
-
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
-
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
-
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
-
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_SYS_HIDDEN_LIBDEPS($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
- fi # test -n "$compiler"
-
- GCC=$lt_save_GCC
- CC=$lt_save_CC
- CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
-
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-CFLAGS=$GCJFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_GO_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Go compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GO_CONFIG],
-[AC_REQUIRE([LT_PROG_GO])dnl
-AC_LANG_SAVE
-
-# Source file extension for Go test sources.
-ac_ext=go
-
-# Object file extension for compiled Go test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="package main; func main() { }"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='package main; func main() { }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GOC-"gccgo"}
-CFLAGS=$GOFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# Go did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GO_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-CFLAGS=
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-if test -n "$compiler"; then
- :
- _LT_CONFIG($1)
-fi
-
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
- [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
- [AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)])])[]dnl
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-
-
-# LT_PROG_GO
-# ----------
-AC_DEFUN([LT_PROG_GO],
-[AC_CHECK_TOOL(GOC, gccgo,)
-])
-
-
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
-
-# _LT_DECL_DLLTOOL
-# ----------------
-# Ensure DLLTOOL variable is set.
-m4_defun([_LT_DECL_DLLTOOL],
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
-AC_SUBST([DLLTOOL])
-])
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
- [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
-
-m4_ifndef([AC_PROG_SED], [
-############################################################
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-############################################################
-
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- lt_unset=unset
-else
- lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- lt_SP2NL='tr \040 \012'
- lt_NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- lt_SP2NL='tr \100 \n'
- lt_NL2SP='tr \r\n \100\100'
- ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
- func_split_long_opt_name=${1%%=*}
- func_split_long_opt_arg=${1#*=}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
- func_split_short_opt_arg=${1#??}
- func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
- _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
- _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
- func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
- eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
-# _LT_PATH_CONVERSION_FUNCTIONS
-# -----------------------------
-# Determine which file name conversion functions should be used by
-# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
-# for certain cross-compile configurations and native mingw.
-m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_MSG_CHECKING([how to convert $build file names to $host format])
-AC_CACHE_VAL(lt_cv_to_host_file_cmd,
-[case $host in
- *-*-mingw* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
- ;;
- *-*-cygwin* )
- lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
- ;;
- * ) # otherwise, assume *nix
- lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
- ;;
- esac
- ;;
- *-*-cygwin* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
- ;;
- *-*-cygwin* )
- lt_cv_to_host_file_cmd=func_convert_file_noop
- ;;
- * ) # otherwise, assume *nix
- lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
- ;;
- esac
- ;;
- * ) # unhandled hosts (and "normal" native builds)
- lt_cv_to_host_file_cmd=func_convert_file_noop
- ;;
-esac
-])
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
-_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
- [0], [convert $build file names to $host format])dnl
-
-AC_MSG_CHECKING([how to convert $build file names to toolchain format])
-AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
-[#assume ordinary cross tools, or native build.
-lt_cv_to_tool_file_cmd=func_convert_file_noop
-case $host in
- *-*-mingw* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
- ;;
- esac
- ;;
-esac
-])
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
-_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
- [0], [convert $build files to toolchain format])dnl
-])# _LT_PATH_CONVERSION_FUNCTIONS
+++ /dev/null
-# Helper functions for option handling. -*- Autoconf -*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 7 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-m4_define([_LT_MANGLE_OPTION],
-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it. Other OPTION-NAMEs are
-# saved as a flag.
-m4_define([_LT_SET_OPTION],
-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
- _LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
-])
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-m4_define([_LT_IF_OPTION],
-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-m4_define([_LT_UNLESS_OPTIONS],
-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
- [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
- [m4_define([$0_found])])])[]dnl
-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
-])[]dnl
-])
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME. If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-m4_defun([_LT_SET_OPTIONS],
-[# Set options
-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
- [_LT_SET_OPTION([$1], _LT_Option)])
-
-m4_if([$1],[LT_INIT],[
- dnl
- dnl Simply set some default values (i.e off) if boolean options were not
- dnl specified:
- _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
- ])
- _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
- ])
- dnl
- dnl If no reference was made to various pairs of opposing options, then
- dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
- dnl archives by default:
- _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
- _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
- _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
- _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
- ])
-])# _LT_SET_OPTIONS
-
-
-## --------------------------------- ##
-## Macros to handle LT_INIT options. ##
-## --------------------------------- ##
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-m4_define([_LT_MANGLE_DEFUN],
-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-m4_define([LT_OPTION_DEFINE],
-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
-])# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
-])
-
-AU_DEFUN([AC_LIBTOOL_DLOPEN],
-[_LT_SET_OPTION([LT_INIT], [dlopen])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
-[enable_win32_dll=yes
-
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
-esac
-
-test -z "$AS" && AS=as
-_LT_DECL([], [AS], [1], [Assembler program])dnl
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
-])# win32-dll
-
-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-_LT_SET_OPTION([LT_INIT], [win32-dll])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_SHARED],
-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([shared],
- [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
-
- _LT_DECL([build_libtool_libs], [enable_shared], [0],
- [Whether or not to build shared libraries])
-])# _LT_ENABLE_SHARED
-
-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
-])
-
-AC_DEFUN([AC_DISABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], [disable-shared])
-])
-
-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_STATIC],
-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([static],
- [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
-
- _LT_DECL([build_old_libs], [enable_static], [0],
- [Whether or not to build static libraries])
-])# _LT_ENABLE_STATIC
-
-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
-])
-
-AC_DEFUN([AC_DISABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], [disable-static])
-])
-
-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_FAST_INSTALL],
-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([fast-install],
- [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
-
-_LT_DECL([fast_install], [enable_fast_install], [0],
- [Whether or not to optimize for fast installation])dnl
-])# _LT_ENABLE_FAST_INSTALL
-
-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
-
-# Old names:
-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
-])
-
-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-m4_define([_LT_WITH_PIC],
-[AC_ARG_WITH([pic],
- [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [lt_p=${PACKAGE-default}
- case $withval in
- yes|no) pic_mode=$withval ;;
- *)
- pic_mode=default
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
- if test "X$lt_pkg" = "X$lt_p"; then
- pic_mode=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-
-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
-])# _LT_WITH_PIC
-
-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
-
-# Old name:
-AU_DEFUN([AC_LIBTOOL_PICMODE],
-[_LT_SET_OPTION([LT_INIT], [pic-only])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
-
-## ----------------- ##
-## LTDL_INIT Options ##
-## ----------------- ##
-
-m4_define([_LTDL_MODE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
- [m4_define([_LTDL_MODE], [nonrecursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
- [m4_define([_LTDL_MODE], [recursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
- [m4_define([_LTDL_MODE], [subproject])])
-
-m4_define([_LTDL_TYPE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [installable],
- [m4_define([_LTDL_TYPE], [installable])])
-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
- [m4_define([_LTDL_TYPE], [convenience])])
+++ /dev/null
-# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-m4_define([lt_join],
-[m4_if([$#], [1], [],
- [$#], [2], [[$2]],
- [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
-m4_define([_lt_join],
-[m4_if([$#$2], [2], [],
- [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-m4_define([lt_car], [[$1]])
-m4_define([lt_cdr],
-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
- [$#], 1, [],
- [m4_dquote(m4_shift($@))])])
-m4_define([lt_unquote], $1)
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-m4_define([lt_append],
-[m4_define([$1],
- m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-m4_define([lt_combine],
-[m4_if(m4_eval([$# > 3]), [1],
- [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
-[[m4_foreach([_Lt_prefix], [$2],
- [m4_foreach([_Lt_suffix],
- ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
- [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-m4_define([lt_if_append_uniq],
-[m4_ifdef([$1],
- [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
- [lt_append([$1], [$2], [$3])$4],
- [$5])],
- [lt_append([$1], [$2], [$3])$4])])
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-m4_define([lt_dict_add],
-[m4_define([$1($2)], [$3])])
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-m4_define([lt_dict_add_subkey],
-[m4_define([$1($2:$3)], [$4])])
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-m4_define([lt_dict_fetch],
-[m4_ifval([$3],
- m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
- m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-m4_define([lt_if_dict_fetch],
-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
- [$5],
- [$6])])
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-m4_define([lt_dict_filter],
-[m4_if([$5], [], [],
- [lt_join(m4_quote(m4_default([$4], [[, ]])),
- lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
- [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
-])
+++ /dev/null
-# ltversion.m4 -- version numbers -*- Autoconf -*-
-#
-# Copyright (C) 2004 Free Software Foundation, Inc.
-# Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# @configure_input@
-
-# serial 3337 ltversion.m4
-# This file is part of GNU Libtool
-
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
-
-AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
-_LT_DECL(, macro_revision, 0)
-])
+++ /dev/null
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
-# Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 5 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else. This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
-
-m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
-m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
-m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
-m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
-m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
-m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
-m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
-m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
-m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
-m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
-m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
-m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
-m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
-m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
-m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
-m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
-m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
-m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
-m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
-m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
-m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
-m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
-m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
-m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
-m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
-m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
-m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
-m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
-m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
-m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
-m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
-m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
-m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
-m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
-m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
-m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
-m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
+++ /dev/null
-#serial 3
-
-dnl From Jim Meyering.
-dnl Determine whether malloc accepts 0 as its argument.
-dnl If it doesn't, arrange to use the replacement function.
-dnl
-
-AC_DEFUN([jm_FUNC_MALLOC],
-[
- dnl xmalloc.c requires that this symbol be defined so it doesn't
- dnl mistakenly use a broken malloc -- as it might if this test were omitted.
- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_MALLOC_CHECK, 1,
- [Define if the malloc check has been performed. ])
-
- AC_CACHE_CHECK([for working malloc], jm_cv_func_working_malloc,
- [AC_TRY_RUN([
- char *malloc ();
- int
- main ()
- {
- exit (malloc (0) ? 0 : 1);
- }
- ],
- jm_cv_func_working_malloc=yes,
- jm_cv_func_working_malloc=no,
- dnl When crosscompiling, assume malloc is broken.
- jm_cv_func_working_malloc=no)
- ])
- if test $jm_cv_func_working_malloc = no; then
- AC_LIBOBJ([malloc])
- AC_DEFINE_UNQUOTED(malloc, rpl_malloc,
- [Define to rpl_malloc if the replacement function should be used.])
- fi
-])
+++ /dev/null
-# nls.m4 serial 5 (gettext-0.18)
-dnl Copyright (C) 1995-2003, 2005-2006, 2008-2010 Free Software Foundation,
-dnl Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-AC_DEFUN([AM_NLS],
-[
- AC_MSG_CHECKING([whether NLS is requested])
- dnl Default is enabled NLS
- AC_ARG_ENABLE([nls],
- [ --disable-nls do not use Native Language Support],
- USE_NLS=$enableval, USE_NLS=yes)
- AC_MSG_RESULT([$USE_NLS])
- AC_SUBST([USE_NLS])
-])
+++ /dev/null
-# po.m4 serial 17 (gettext-0.18)
-dnl Copyright (C) 1995-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
-dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
-
-AC_PREREQ([2.50])
-
-dnl Checks for all prerequisites of the po subdirectory.
-AC_DEFUN([AM_PO_SUBDIRS],
-[
- AC_REQUIRE([AC_PROG_MAKE_SET])dnl
- AC_REQUIRE([AC_PROG_INSTALL])dnl
- AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
- AC_REQUIRE([AM_NLS])dnl
-
- dnl Release version of the gettext macros. This is used to ensure that
- dnl the gettext macros and po/Makefile.in.in are in sync.
- AC_SUBST([GETTEXT_MACRO_VERSION], [0.18])
-
- dnl Perform the following tests also if --disable-nls has been given,
- dnl because they are needed for "make dist" to work.
-
- dnl Search for GNU msgfmt in the PATH.
- dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
- dnl The second test excludes FreeBSD msgfmt.
- AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
- [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
-
- dnl Test whether it is GNU msgfmt >= 0.15.
-changequote(,)dnl
- case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
- *) MSGFMT_015=$MSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([MSGFMT_015])
-changequote(,)dnl
- case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
- *) GMSGFMT_015=$GMSGFMT ;;
- esac
-changequote([,])dnl
- AC_SUBST([GMSGFMT_015])
-
- dnl Search for GNU xgettext 0.12 or newer in the PATH.
- dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
- dnl The second test excludes FreeBSD xgettext.
- AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
- [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
- (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
- :)
- dnl Remove leftover from FreeBSD xgettext call.
- rm -f messages.po
-
- dnl Test whether it is GNU xgettext >= 0.15.
-changequote(,)dnl
- case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
- '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
- *) XGETTEXT_015=$XGETTEXT ;;
- esac
-changequote([,])dnl
- AC_SUBST([XGETTEXT_015])
-
- dnl Search for GNU msgmerge 0.11 or newer in the PATH.
- AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
- [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
-
- dnl Installation directories.
- dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
- dnl have to define it here, so that it can be used in po/Makefile.
- test -n "$localedir" || localedir='${datadir}/locale'
- AC_SUBST([localedir])
-
- dnl Support for AM_XGETTEXT_OPTION.
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
- AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
-
- AC_CONFIG_COMMANDS([po-directories], [[
- for ac_file in $CONFIG_FILES; do
- # Support "outfile[:infile[:infile...]]"
- case "$ac_file" in
- *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
- esac
- # PO directories have a Makefile.in generated from Makefile.in.in.
- case "$ac_file" in */Makefile.in)
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
- # Treat a directory as a PO directory if and only if it has a
- # POTFILES.in file. This allows packages to have multiple PO
- # directories under different names or in different locations.
- if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
- rm -f "$ac_dir/POTFILES"
- test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
- cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
- POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
- # on $ac_dir but don't depend on user-specified configuration
- # parameters.
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # The set of available languages was given in configure.in.
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
- fi
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- done
- fi
- test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
- for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
- if test -f "$f"; then
- case "$f" in
- *.orig | *.bak | *~) ;;
- *) cat "$f" >> "$ac_dir/Makefile" ;;
- esac
- fi
- done
- fi
- ;;
- esac
- done]],
- [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
- # from automake < 1.5.
- eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
- # Capture the value of LINGUAS because we need it to compute CATALOGS.
- LINGUAS="${LINGUAS-%UNSET%}"
- ])
-])
-
-dnl Postprocesses a Makefile in a directory containing PO files.
-AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
-[
- # When this code is run, in config.status, two variables have already been
- # set:
- # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
- # - LINGUAS is the value of the environment variable LINGUAS at configure
- # time.
-
-changequote(,)dnl
- # Adjust a relative srcdir.
- ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
- ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
- ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
- # In autoconf-2.13 it is called $ac_given_srcdir.
- # In autoconf-2.50 it is called $srcdir.
- test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
- case "$ac_given_srcdir" in
- .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
- /*) top_srcdir="$ac_given_srcdir" ;;
- *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
- esac
-
- # Find a way to echo strings without interpreting backslash.
- if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='echo'
- else
- if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
- gt_echo='printf %s\n'
- else
- echo_func () {
- cat <<EOT
-$*
-EOT
- }
- gt_echo='echo_func'
- fi
- fi
-
- # A sed script that extracts the value of VARIABLE from a Makefile.
- sed_x_variable='
-# Test if the hold space is empty.
-x
-s/P/P/
-x
-ta
-# Yes it was empty. Look if we have the expected variable definition.
-/^[ ]*VARIABLE[ ]*=/{
- # Seen the first line of the variable definition.
- s/^[ ]*VARIABLE[ ]*=//
- ba
-}
-bd
-:a
-# Here we are processing a line from the variable definition.
-# Remove comment, more precisely replace it with a space.
-s/#.*$/ /
-# See if the line ends in a backslash.
-tb
-:b
-s/\\$//
-# Print the line, without the trailing backslash.
-p
-tc
-# There was no trailing backslash. The end of the variable definition is
-# reached. Clear the hold space.
-s/^.*$//
-x
-bd
-:c
-# A trailing backslash means that the variable definition continues in the
-# next line. Put a nonempty string into the hold space to indicate this.
-s/^.*$/P/
-x
-:d
-'
-changequote([,])dnl
-
- # Set POTFILES to the value of the Makefile variable POTFILES.
- sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
- POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
- # Compute POTFILES_DEPS as
- # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
- POTFILES_DEPS=
- for file in $POTFILES; do
- POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
- done
- POMAKEFILEDEPS=""
-
- if test -n "$OBSOLETE_ALL_LINGUAS"; then
- test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
- fi
- if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
- # The LINGUAS file contains the set of available languages.
- ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
- POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
- else
- # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
- sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
- ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
- fi
- # Hide the ALL_LINGUAS assigment from automake < 1.5.
- eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
- # Compute POFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
- # Compute UPDATEPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
- # Compute DUMMYPOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
- # Compute GMOFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
- # Compute PROPERTIESFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
- # Compute CLASSFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
- # Compute QMFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
- # Compute MSGFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
- # Compute RESOURCESDLLFILES
- # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
- case "$ac_given_srcdir" in
- .) srcdirpre= ;;
- *) srcdirpre='$(srcdir)/' ;;
- esac
- POFILES=
- UPDATEPOFILES=
- DUMMYPOFILES=
- GMOFILES=
- PROPERTIESFILES=
- CLASSFILES=
- QMFILES=
- MSGFILES=
- RESOURCESDLLFILES=
- for lang in $ALL_LINGUAS; do
- POFILES="$POFILES $srcdirpre$lang.po"
- UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
- DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
- PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
- CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
- QMFILES="$QMFILES $srcdirpre$lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
- done
- # CATALOGS depends on both $ac_dir and the user's LINGUAS
- # environment variable.
- INST_LINGUAS=
- if test -n "$ALL_LINGUAS"; then
- for presentlang in $ALL_LINGUAS; do
- useit=no
- if test "%UNSET%" != "$LINGUAS"; then
- desiredlanguages="$LINGUAS"
- else
- desiredlanguages="$ALL_LINGUAS"
- fi
- for desiredlang in $desiredlanguages; do
- # Use the presentlang catalog if desiredlang is
- # a. equal to presentlang, or
- # b. a variant of presentlang (because in this case,
- # presentlang can be used as a fallback for messages
- # which are not translated in the desiredlang catalog).
- case "$desiredlang" in
- "$presentlang"*) useit=yes;;
- esac
- done
- if test $useit = yes; then
- INST_LINGUAS="$INST_LINGUAS $presentlang"
- fi
- done
- fi
- CATALOGS=
- JAVACATALOGS=
- QTCATALOGS=
- TCLCATALOGS=
- CSHARPCATALOGS=
- if test -n "$INST_LINGUAS"; then
- for lang in $INST_LINGUAS; do
- CATALOGS="$CATALOGS $lang.gmo"
- JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
- QTCATALOGS="$QTCATALOGS $lang.qm"
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
- done
- fi
-
- sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
- if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang.msg: $lang.po
- @echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
- \$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
- # Add dependencies that cannot be formulated as a simple suffix rule.
- for lang in $ALL_LINGUAS; do
- frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
- cat >> "$ac_file.tmp" <<EOF
-$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
- @echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
- \$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
-EOF
- done
- fi
- if test -n "$POMAKEFILEDEPS"; then
- cat >> "$ac_file.tmp" <<EOF
-Makefile: $POMAKEFILEDEPS
-EOF
- fi
- mv "$ac_file.tmp" "$ac_file"
-])
-
-dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
-AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
-[
- XGETTEXT_EXTRA_OPTIONS=
-])
-
-dnl Registers an option to be passed to xgettext in the po subdirectory.
-AC_DEFUN([AM_XGETTEXT_OPTION],
-[
- AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
- XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
-])
+++ /dev/null
-# progtest.m4 serial 6 (gettext-0.18)
-dnl Copyright (C) 1996-2003, 2005, 2008-2010 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-dnl
-dnl This file can can be used in projects which are not available under
-dnl the GNU General Public License or the GNU Library General Public
-dnl License but which still want to provide support for the GNU gettext
-dnl functionality.
-dnl Please note that the actual code of the GNU gettext library is covered
-dnl by the GNU Library General Public License, and the rest of the GNU
-dnl gettext package package is covered by the GNU General Public License.
-dnl They are *not* in the public domain.
-
-dnl Authors:
-dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
-
-AC_PREREQ([2.50])
-
-# Search path for a program which passes the given test.
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN([AM_PATH_PROG_WITH_TEST],
-[
-# Prepare PATH_SEPARATOR.
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- echo "#! /bin/sh" >conf$$.sh
- echo "exit 0" >>conf$$.sh
- chmod +x conf$$.sh
- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
- PATH_SEPARATOR=';'
- else
- PATH_SEPARATOR=:
- fi
- rm -f conf$$.sh
-fi
-
-# Find out how to test for executable files. Don't use a zero-byte file,
-# as systems may use methods other than mode bits to determine executability.
-cat >conf$$.file <<_ASEOF
-#! /bin/sh
-exit 0
-_ASEOF
-chmod +x conf$$.file
-if test -x conf$$.file >/dev/null 2>&1; then
- ac_executable_p="test -x"
-else
- ac_executable_p="test -f"
-fi
-rm -f conf$$.file
-
-# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL([ac_cv_path_$1],
-[case "[$]$1" in
- [[\\/]]* | ?:[[\\/]]*)
- ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
- ;;
- *)
- ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in ifelse([$5], , $PATH, [$5]); do
- IFS="$ac_save_IFS"
- test -z "$ac_dir" && ac_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
- echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
- if [$3]; then
- ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
- break 2
- fi
- fi
- done
- done
- IFS="$ac_save_IFS"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
- ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
- AC_MSG_RESULT([$][$1])
-else
- AC_MSG_RESULT([no])
-fi
-AC_SUBST([$1])dnl
-])
+++ /dev/null
-#serial 3
-
-dnl From Jim Meyering.
-dnl Determine whether realloc works when both arguments are 0.
-dnl If it doesn't, arrange to use the replacement function.
-dnl
-
-AC_DEFUN([jm_FUNC_REALLOC],
-[
- dnl xmalloc.c requires that this symbol be defined so it doesn't
- dnl mistakenly use a broken realloc -- as it might if this test were omitted.
- AC_DEFINE_UNQUOTED(HAVE_DONE_WORKING_REALLOC_CHECK, 1,
- [Define if the realloc check has been performed. ])
-
- AC_CACHE_CHECK([for working realloc], jm_cv_func_working_realloc,
- [AC_TRY_RUN([
- char *realloc ();
- int
- main ()
- {
- exit (realloc (0, 0) ? 0 : 1);
- }
- ],
- jm_cv_func_working_realloc=yes,
- jm_cv_func_working_realloc=no,
- dnl When crosscompiling, assume realloc is broken.
- jm_cv_func_working_realloc=no)
- ])
- if test $jm_cv_func_working_realloc = no; then
- AC_LIBOBJ([realloc])
- AC_DEFINE_UNQUOTED(realloc, rpl_realloc,
- [Define to rpl_realloc if the replacement function should be used.])
- fi
-])
+++ /dev/null
-#serial 2
-
-dnl From Jim Meyering
-
-dnl Define HAVE_STRUCT_UTIMBUF if `struct utimbuf' is declared --
-dnl usually in <utime.h>.
-dnl Some systems have utime.h but don't declare the struct anywhere.
-
-AC_DEFUN([jm_STRUCT_UTIMBUF],
-[
- AC_CHECK_HEADERS(utime.h)
- AC_REQUIRE([AC_HEADER_TIME])
- AC_CACHE_CHECK([for struct utimbuf], fu_cv_sys_struct_utimbuf,
- [AC_TRY_COMPILE(
- [
-#ifdef TIME_WITH_SYS_TIME
-# include <sys/time.h>
-# include <time.h>
-#else
-# ifdef HAVE_SYS_TIME_H
-# include <sys/time.h>
-# else
-# include <time.h>
-# endif
-#endif
-#ifdef HAVE_UTIME_H
-# include <utime.h>
-#endif
- ],
- [static struct utimbuf x; x.actime = x.modtime;],
- fu_cv_sys_struct_utimbuf=yes,
- fu_cv_sys_struct_utimbuf=no)
- ])
-
- if test $fu_cv_sys_struct_utimbuf = yes; then
- AC_DEFINE_UNQUOTED(HAVE_STRUCT_UTIMBUF, 1,
-[Define if struct utimbuf is declared -- usually in <utime.h>.
- Some systems have utime.h but don't declare the struct anywhere. ])
- fi
-])
+++ /dev/null
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-# Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- tar try tar, gnutar, gtar, then tar without non-portable flags
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
- lex|yacc)
- # Not GNU programs, they don't have --version.
- ;;
-
- tar)
- if test -n "$run"; then
- echo 1>&2 "ERROR: \`tar' requires --run"
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- exit 1
- fi
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison|yacc)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex|flex)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG="\${$#}"
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit 1
- fi
- ;;
-
- makeinfo)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- tar)
- shift
-
- # We have already tried tar in the generic part.
- # Look for gnutar/gtar before invocation to avoid ugly error
- # messages.
- if (gnutar --version > /dev/null 2>&1); then
- gnutar "$@" && exit 0
- fi
- if (gtar --version > /dev/null 2>&1); then
- gtar "$@" && exit 0
- fi
- firstarg="$1"
- if shift; then
- case $firstarg in
- *o*)
- firstarg=`echo "$firstarg" | sed s/o//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- case $firstarg in
- *h*)
- firstarg=`echo "$firstarg" | sed s/h//`
- tar "$firstarg" "$@" && exit 0
- ;;
- esac
- fi
-
- echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
- You may want to install GNU tar or Free paxutils, or check the
- command line arguments."
- exit 1
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
+++ /dev/null
-# Makefile.in generated by automake 1.13.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile for Recode sources.
-# Copyright © 1991,92,93,94,95,96,97,98,99, 00 Free Software Foundation, Inc.
-# François Pinard <pinard@iro.umontreal.ca>, 1988.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-
-
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-bin_PROGRAMS = recode$(EXEEXT)
-subdir = src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/mkinstalldirs $(top_srcdir)/depcomp \
- $(include_HEADERS) $(noinst_HEADERS) ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/malloc.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/realloc.m4 \
- $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
- "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"
-LTLIBRARIES = $(lib_LTLIBRARIES)
-librecode_la_LIBADD =
-am__objects_1 = flat.lo html.lo lat1ltex.lo lat1txte.lo rfc1345.lo \
- texinfo.lo
-am__objects_2 = base64.lo dump.lo endline.lo permut.lo quoted.lo
-am__objects_3 = african.lo afrtran.lo applemac.lo atarist.lo \
- bangbang.lo cdcnos.lo ebcdic.lo ibmpc.lo iconqnx.lo \
- lat1asci.lo java.lo mule.lo strip-data.lo testdump.lo ucs.lo \
- utf16.lo utf7.lo utf8.lo varia.lo vn.lo $(am__objects_1) \
- $(am__objects_2) merged.lo
-am_librecode_la_OBJECTS = argmatch.lo charname.lo combine.lo \
- exitfail.lo fr-charname.lo hash.lo iconv.lo localcharset.lo \
- names.lo outer.lo quotearg.lo recode.lo request.lo \
- strip-pool.lo task.lo xalloc-die.lo xmalloc.lo \
- $(am__objects_3)
-librecode_la_OBJECTS = $(am_librecode_la_OBJECTS)
-AM_V_lt = $(am__v_lt_@AM_V@)
-am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
-am__v_lt_0 = --silent
-am__v_lt_1 =
-librecode_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(librecode_la_LDFLAGS) $(LDFLAGS) -o $@
-PROGRAMS = $(bin_PROGRAMS)
-am_recode_OBJECTS = main.$(OBJEXT) freeze.$(OBJEXT) mixed.$(OBJEXT)
-recode_OBJECTS = $(am_recode_OBJECTS)
-recode_DEPENDENCIES = librecode.la ../lib/libreco.a
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
-AM_V_CC = $(am__v_CC_@AM_V@)
-am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
-am__v_CC_0 = @echo " CC " $@;
-am__v_CC_1 =
-CCLD = $(CC)
-LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
- $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-AM_V_CCLD = $(am__v_CCLD_@AM_V@)
-am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
-am__v_CCLD_0 = @echo " CCLD " $@;
-am__v_CCLD_1 =
-SOURCES = $(librecode_la_SOURCES) $(recode_SOURCES)
-DIST_SOURCES = $(librecode_la_SOURCES) $(recode_SOURCES)
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-HEADERS = $(include_HEADERS) $(noinst_HEADERS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-# Read a list of newline-separated strings from the standard input,
-# and print each of them once, without duplicates. Input order is
-# *not* preserved.
-am__uniquify_input = $(AWK) '\
- BEGIN { nonempty = 0; } \
- { items[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in items) print i; }; } \
-'
-# Make sure the list of sources is unique. This is necessary because,
-# e.g., the same source file might be shared among _SOURCES variables
-# for different programs/libraries.
-am__define_uniq_tagged_files = \
- list='$(am__tagged_files)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | $(am__uniquify_input)`
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = -DLIBDIR=\"$(libdir)\" @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-
-# These CFLAGS values are not auto-configured:
-# -DDIFF_HASH For using GNU diff's hash algorithm instead.
-# -DHASH_STATS For printing a one-liner hash statistics.
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = gnits
-lib_LTLIBRARIES = librecode.la
-man_MANS = recode.1
-include_HEADERS = recode.h recodext.h
-noinst_HEADERS = argmatch.h charname.h common.h decsteps.h exit.h exitfail.h \
-fr-charname.h hash.h inisteps.h iconvdecl.h quotearg.h rfc1345.h tersteps.h \
-xalloc.h $(H_FALLBACKS) $(H_SURFACES)
-
-EXTRA_DIST = recodext.h.in stamp-steps stamp-strip \
-$(L_STEPS) mergelex.py $(MANS)
-
-CLEANFILES = iconvdecl.h
-C_STEPS = african.c afrtran.c applemac.c atarist.c bangbang.c cdcnos.c \
-ebcdic.c ibmpc.c iconqnx.c lat1asci.c java.c mule.c strip-data.c \
-testdump.c ucs.c utf16.c utf7.c utf8.c varia.c vn.c \
-$(C_FALLBACKS) $(C_SURFACES) merged.c
-
-OLD_C_STEPS = next.c
-L_STEPS = ascilat1.l $(L_FALLBACKS) $(L_SURFACES)
-H_FALLBACKS =
-C_FALLBACKS = flat.c html.c lat1ltex.c lat1txte.c rfc1345.c texinfo.c
-L_FALLBACKS = ltexlat1.l txtelat1.l
-H_SURFACES = base64.h
-C_SURFACES = base64.c dump.c endline.c permut.c quoted.c
-L_SURFACES =
-recode_SOURCES = main.c freeze.c mixed.c
-recode_LDADD = librecode.la ../lib/libreco.a
-librecode_la_SOURCES = argmatch.c charname.c combine.c exitfail.c \
-fr-charname.c hash.c iconv.c localcharset.c names.c outer.c quotearg.c \
-recode.c request.c strip-pool.c task.c xalloc-die.c xmalloc.c $(C_STEPS)
-
-librecode_la_LDFLAGS = -version-info 0:0:0
-
-# Relative to $(srcdir).
-ALAIN = $(KELD)
-KELD = ../keld
-CHARSETS_DEF = $(KELD)/charsets.def
-MNEMONICS_DS = $(KELD)/iso10646.def $(KELD)/other.def $(KELD)/control.def
-RFC1345_TXT = $(KELD)/rfc1345.txt
-NOMS_CARACS = $(ALAIN)/NomsSeulsfinal.lst
-AM_CPPFLAGS = -I.. -I$(srcdir) -I$(top_srcdir)/lib
-ETAGS_ARGS = $(L_STEPS)
-TAGS_DEPENDENCIES = $(L_STEPS)
-PERL = perl
-PYTHON = python
-TABLES_PY = $(PYTHON) $(top_srcdir)/tables.py
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits src/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-install-libLTLIBRARIES: $(lib_LTLIBRARIES)
- @$(NORMAL_INSTALL)
- @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
- list2=; for p in $$list; do \
- if test -f $$p; then \
- list2="$$list2 $$p"; \
- else :; fi; \
- done; \
- test -z "$$list2" || { \
- echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
- }
-
-uninstall-libLTLIBRARIES:
- @$(NORMAL_UNINSTALL)
- @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
- $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
- done
-
-clean-libLTLIBRARIES:
- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
- @list='$(lib_LTLIBRARIES)'; \
- locs=`for p in $$list; do echo $$p; done | \
- sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
- sort -u`; \
- test -z "$$locs" || { \
- echo rm -f $${locs}; \
- rm -f $${locs}; \
- }
-
-librecode.la: $(librecode_la_OBJECTS) $(librecode_la_DEPENDENCIES) $(EXTRA_librecode_la_DEPENDENCIES)
- $(AM_V_CCLD)$(librecode_la_LINK) -rpath $(libdir) $(librecode_la_OBJECTS) $(librecode_la_LIBADD) $(LIBS)
-install-binPROGRAMS: $(bin_PROGRAMS)
- @$(NORMAL_INSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
- fi; \
- for p in $$list; do echo "$$p $$p"; done | \
- sed 's/$(EXEEXT)$$//' | \
- while read p p1; do if test -f $$p \
- || test -f $$p1 \
- ; then echo "$$p"; echo "$$p"; else :; fi; \
- done | \
- sed -e 'p;s,.*/,,;n;h' \
- -e 's|.*|.|' \
- -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
- sed 'N;N;N;s,\n, ,g' | \
- $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
- { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
- if ($$2 == $$4) files[d] = files[d] " " $$1; \
- else { print "f", $$3 "/" $$4, $$1; } } \
- END { for (d in files) print "f", d, files[d] }' | \
- while read type dir files; do \
- if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
- test -z "$$files" || { \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
- } \
- ; done
-
-uninstall-binPROGRAMS:
- @$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
- files=`for p in $$list; do echo "$$p"; done | \
- sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
- -e 's/$$/$(EXEEXT)/' \
- `; \
- test -n "$$list" || exit 0; \
- echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
- cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
- @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
- echo " rm -f" $$list; \
- rm -f $$list || exit $$?; \
- test -n "$(EXEEXT)" || exit 0; \
- list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
- echo " rm -f" $$list; \
- rm -f $$list
-
-installcheck-binPROGRAMS: $(bin_PROGRAMS)
- bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \
- case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \
- *" $$p "* | *" $(srcdir)/$$p "*) continue;; \
- esac; \
- f=`echo "$$p" | \
- sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- for opt in --help --version; do \
- if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \
- 2>c$${pid}_.err </dev/null \
- && test -n "`cat c$${pid}_.out`" \
- && test -z "`cat c$${pid}_.err`"; then :; \
- else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \
- done; \
- done; rm -f c$${pid}_.???; exit $$bad
-
-recode$(EXEEXT): $(recode_OBJECTS) $(recode_DEPENDENCIES) $(EXTRA_recode_DEPENDENCIES)
- @rm -f recode$(EXEEXT)
- $(AM_V_CCLD)$(LINK) $(recode_OBJECTS) $(recode_LDADD) $(LIBS)
-
-mostlyclean-compile:
- -rm -f *.$(OBJEXT)
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/african.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/afrtran.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/applemac.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/argmatch.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atarist.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bangbang.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/base64.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cdcnos.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/charname.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/combine.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dump.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ebcdic.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/endline.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exitfail.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flat.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fr-charname.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/freeze.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/html.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ibmpc.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iconqnx.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/iconv.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/java.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lat1asci.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lat1ltex.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lat1txte.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/localcharset.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/merged.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mixed.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mule.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/names.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/outer.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/permut.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/quotearg.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/quoted.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/recode.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/request.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rfc1345.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strip-data.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strip-pool.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/testdump.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/texinfo.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ucs.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utf16.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utf7.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utf8.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/varia.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vn.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xalloc-die.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xmalloc.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-install-includeHEADERS: $(include_HEADERS)
- @$(NORMAL_INSTALL)
- @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
- $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
- done
-
-uninstall-includeHEADERS:
- @$(NORMAL_UNINSTALL)
- @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
- files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
- dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
-
-ID: $(am__tagged_files)
- $(am__define_uniq_tagged_files); mkid -fID $$unique
-tags: tags-am
-TAGS: tags
-
-tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- set x; \
- here=`pwd`; \
- $(am__define_uniq_tagged_files); \
- shift; \
- if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- if test $$# -gt 0; then \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- "$$@" $$unique; \
- else \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$unique; \
- fi; \
- fi
-ctags: ctags-am
-
-CTAGS: ctags
-ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- $(am__define_uniq_tagged_files); \
- test -z "$(CTAGS_ARGS)$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && $(am__cd) $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) "$$here"
-cscopelist: cscopelist-am
-
-cscopelist-am: $(am__tagged_files)
- list='$(am__tagged_files)'; \
- case "$(srcdir)" in \
- [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- *) sdir=$(subdir)/$(srcdir) ;; \
- esac; \
- for i in $$list; do \
- if test -f "$$i"; then \
- echo "$(subdir)/$$i"; \
- else \
- echo "$$sdir/$$i"; \
- fi; \
- done >> $(top_builddir)/cscope.files
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
-check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS)
-install-binPROGRAMS: install-libLTLIBRARIES
-
-installdirs:
- for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
- clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
- distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-includeHEADERS install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am: installcheck-binPROGRAMS
-
-maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
- uninstall-libLTLIBRARIES uninstall-man
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean \
- clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
- clean-libtool cscopelist-am ctags ctags-am distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-binPROGRAMS install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am \
- install-includeHEADERS install-info install-info-am \
- install-libLTLIBRARIES install-man install-man1 install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installcheck-binPROGRAMS \
- installdirs maintainer-clean maintainer-clean-generic \
- mostlyclean mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
- uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \
- uninstall-libLTLIBRARIES uninstall-man uninstall-man1
-
-
-$(srcdir)/merged.c: mergelex.py $(L_STEPS)
- (cd $(srcdir) && cat $(L_STEPS)) \
- | $(PYTHON) $(srcdir)/mergelex.py > merged.tm1
- $(LEX) -t -8 -Plibrecode_yy merged.tm1 > merged.tm2
- grep -v '^# *line [0-9]' merged.tm2 > $(srcdir)/merged.c
- rm merged.tm1 merged.tm2
-
-$(srcdir)/recode.1: recode
- @if test -r $@ && test ! -w $@; then \
- echo "WARNING: Page \`$@' read only, not updated"; \
- elif $(PERL) $(top_srcdir)/doc/help2man \
- --name="converts files between character sets" \
- --output=$@ ./recode; then \
- echo "Page \`$@' has been updated"; \
- else \
- echo "WARNING: Page \`$@' has *not* been updated."; \
- echo " It might be that \`Perl' is missing on your system,"; \
- echo " but you may safely and merely ignore this error."; \
- fi
-
-$(srcdir)/recodext.h: $(top_srcdir)/cleaner.h.in $(srcdir)/recodext.h.in
- cat $(top_srcdir)/cleaner.h.in $(srcdir)/recodext.h.in > $@
-
-main.o: main.c ../config.status
-
-charname.lo: rfc1345.h
-charname.h: ../tables.py $(MNEMONICS_DS) $(RFC1345_TXT)
- $(TABLES_PY) -C $(srcdir) -n $(MNEMONICS_DS) $(RFC1345_TXT)
-
-fr-charname.lo: fr-charname.h
-fr-charname.h: ../tables.py $(NOMS_CARACS)
- $(TABLES_PY) -C $(srcdir) -Fn $(NOMS_CARACS)
-
-iconv.lo: iconvdecl.h
-iconvdecl.h: ../tables.py
- $(TABLES_PY) -i
-
-outer.lo: stamp-steps
-stamp-steps: $(C_STEPS)
- @echo "Updating {dec,ini,ter}steps.h"
- @(cd $(srcdir) && grep -h '^module_' $(C_STEPS)) \
- | sed 's/ .*//' > liste.tmp
- @sed 's/\(.*\)/bool \1 PARAMS ((struct recode_outer *));/' \
- liste.tmp > decsteps.tmp
- @sed 's/\(.*\)/void del\1 PARAMS ((struct recode_outer *));/' \
- liste.tmp >> decsteps.tmp
- @sed 's/\(.*\)/ if (!\1 (outer)) return false;/' \
- liste.tmp > inisteps.tmp
- @sed 's/\(.*\)/ del\1 (outer);/' \
- liste.tmp > tersteps.tmp
- @rm liste.tmp
- @if cmp -s $(srcdir)/decsteps.h decsteps.tmp; then rm decsteps.tmp; \
- else mv decsteps.tmp $(srcdir)/decsteps.h; fi
- @if cmp -s $(srcdir)/inisteps.h inisteps.tmp; then rm inisteps.tmp; \
- else mv inisteps.tmp $(srcdir)/inisteps.h; fi
- @if cmp -s $(srcdir)/tersteps.h tersteps.tmp; then rm tersteps.tmp; \
- else mv tersteps.tmp $(srcdir)/tersteps.h; fi
- @echo timestamp > $(srcdir)/$@
-
-rfc1345.lo: rfc1345.h
-rfc1345.h: ../tables.py $(MNEMONICS_DS)
- $(TABLES_PY) -C $(srcdir) -m $(MNEMONICS_DS)
-
-# There is duplication of work with making doc/rfc1345.texi.
-# This used to be combined, but it seems clearer to keep both separate.
-strip-pool.c strip-data.c: stamp-strip
-stamp-strip: ../tables.py $(MNEMONICS_DS) $(CHARSETS_DEF)
- $(TABLES_PY) -C $(srcdir) -p $(MNEMONICS_DS) $(CHARSETS_DEF)
- echo timestamp > $(srcdir)/$@
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
+++ /dev/null
-/* DO NOT MODIFY THIS FILE! It was generated by `recode/tables.py'. */
-
-/* Conversion of files between different charsets and surfaces.
- Copyright © 1999 Free Software Foundation, Inc.
- Contributed by François Pinard <pinard@iro.umontreal.ca>, 1993, 1997.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public License
- as published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied warranty
- of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with the Recode Library; see the file `COPYING.LIB'.
- If not, write to the Free Software Foundation, Inc., 59 Temple Place -
- Suite 330, Boston, MA 02111-1307, USA. */
-
-/* This is derived from Bruno Haible's `libiconv' package. */
-static const char *iconv_name_list[1923] =
- {
- "437", NULL,
- "500", NULL,
- "500V1", NULL,
- "850", NULL,
- "851", NULL,
- "852", NULL,
- "855", NULL,
- "856", NULL,
- "857", NULL,
- "860", NULL,
- "861", NULL,
- "862", NULL,
- "863", NULL,
- "864", NULL,
- "865", NULL,
- "866", NULL,
- "866NAV", NULL,
- "869", NULL,
- "874", NULL,
- "904", NULL,
- "1026", NULL,
- "1046", NULL,
- "1047", NULL,
- "8859_1", NULL,
- "8859_2", NULL,
- "8859_3", NULL,
- "8859_4", NULL,
- "8859_5", NULL,
- "8859_6", NULL,
- "8859_7", NULL,
- "8859_8", NULL,
- "8859_9", NULL,
- "10646-1:1993", NULL,
- "UCS4", NULL,
- "ANSI_X3.4-1968", NULL,
- "ANSI_X3.4-1986", NULL,
- "ANSI_X3.4", NULL,
- "ANSI_X3.110-1983", NULL,
- "ANSI_X3.110", NULL,
- "ARABIC", NULL,
- "ARABIC7", NULL,
- "ARMSCII-8", NULL,
- "ASCII", NULL,
- "ASMO-708", NULL,
- "ASMO_449", NULL,
- "BALTIC", NULL,
- "BIG-5", NULL,
- "BIG-FIVE", NULL,
- "BIG5-HKSCS", NULL,
- "BIG5", NULL,
- "BIG5HKSCS", NULL,
- "BIGFIVE", NULL,
- "BS_4730", NULL,
- "CA", NULL,
- "CN-BIG5", NULL,
- "CN-GB", NULL,
- "CN", NULL,
- "CP-AR", NULL,
- "CP-GR", NULL,
- "CP-HU", NULL,
- "CP037", NULL,
- "CP038", NULL,
- "CP273", NULL,
- "CP274", NULL,
- "CP275", NULL,
- "CP278", NULL,
- "CP280", NULL,
- "CP281", NULL,
- "CP282", NULL,
- "CP284", NULL,
- "CP285", NULL,
- "CP290", NULL,
- "CP297", NULL,
- "CP367", NULL,
- "CP420", NULL,
- "CP423", NULL,
- "CP424", NULL,
- "CP437", NULL,
- "CP500", NULL,
- "CP737", NULL,
- "CP775", NULL,
- "CP813", NULL,
- "CP819", NULL,
- "CP850", NULL,
- "CP851", NULL,
- "CP852", NULL,
- "CP855", NULL,
- "CP856", NULL,
- "CP857", NULL,
- "CP860", NULL,
- "CP861", NULL,
- "CP862", NULL,
- "CP863", NULL,
- "CP864", NULL,
- "CP865", NULL,
- "CP866", NULL,
- "CP866NAV", NULL,
- "CP868", NULL,
- "CP869", NULL,
- "CP870", NULL,
- "CP871", NULL,
- "CP874", NULL,
- "CP875", NULL,
- "CP880", NULL,
- "CP891", NULL,
- "CP903", NULL,
- "CP904", NULL,
- "CP905", NULL,
- "CP912", NULL,
- "CP915", NULL,
- "CP916", NULL,
- "CP918", NULL,
- "CP920", NULL,
- "CP922", NULL,
- "CP930", NULL,
- "CP932", NULL,
- "CP933", NULL,
- "CP935", NULL,
- "CP936", NULL,
- "CP937", NULL,
- "CP939", NULL,
- "CP949", NULL,
- "CP950", NULL,
- "CP1004", NULL,
- "CP1026", NULL,
- "CP1046", NULL,
- "CP1047", NULL,
- "CP1070", NULL,
- "CP1079", NULL,
- "CP1081", NULL,
- "CP1084", NULL,
- "CP1089", NULL,
- "CP1124", NULL,
- "CP1125", NULL,
- "CP1129", NULL,
- "CP1132", NULL,
- "CP1133", NULL,
- "CP1160", NULL,
- "CP1161", NULL,
- "CP1162", NULL,
- "CP1163", NULL,
- "CP1164", NULL,
- "CP1250", NULL,
- "CP1251", NULL,
- "CP1252", NULL,
- "CP1253", NULL,
- "CP1254", NULL,
- "CP1255", NULL,
- "CP1256", NULL,
- "CP1257", NULL,
- "CP1258", NULL,
- "CP1361", NULL,
- "CP10007", NULL,
- "CPIBM861", NULL,
- "CSA7-1", NULL,
- "CSA7-2", NULL,
- "CSASCII", NULL,
- "CSA_T500-1983", NULL,
- "CSA_T500", NULL,
- "CSA_Z243.4-1985-1", NULL,
- "CSA_Z243.4-1985-2", NULL,
- "CSA_Z243.419851", NULL,
- "CSA_Z243.419852", NULL,
- "CSDECMCS", NULL,
- "CSEBCDICATDE", NULL,
- "CSEBCDICATDEA", NULL,
- "CSEBCDICCAFR", NULL,
- "CSEBCDICDKNO", NULL,
- "CSEBCDICDKNOA", NULL,
- "CSEBCDICES", NULL,
- "CSEBCDICESA", NULL,
- "CSEBCDICESS", NULL,
- "CSEBCDICFISE", NULL,
- "CSEBCDICFISEA", NULL,
- "CSEBCDICFR", NULL,
- "CSEBCDICIT", NULL,
- "CSEBCDICPT", NULL,
- "CSEBCDICUK", NULL,
- "CSEBCDICUS", NULL,
- "CSEUCKR", NULL,
- "CSEUCPKDFMTJAPANESE", NULL,
- "CSGB2312", NULL,
- "CSHPROMAN8", NULL,
- "CSIBM037", NULL,
- "CSIBM038", NULL,
- "CSIBM273", NULL,
- "CSIBM274", NULL,
- "CSIBM275", NULL,
- "CSIBM277", NULL,
- "CSIBM278", NULL,
- "CSIBM280", NULL,
- "CSIBM281", NULL,
- "CSIBM284", NULL,
- "CSIBM285", NULL,
- "CSIBM290", NULL,
- "CSIBM297", NULL,
- "CSIBM420", NULL,
- "CSIBM423", NULL,
- "CSIBM424", NULL,
- "CSIBM500", NULL,
- "CSIBM851", NULL,
- "CSIBM855", NULL,
- "CSIBM856", NULL,
- "CSIBM857", NULL,
- "CSIBM860", NULL,
- "CSIBM863", NULL,
- "CSIBM864", NULL,
- "CSIBM865", NULL,
- "CSIBM866", NULL,
- "CSIBM868", NULL,
- "CSIBM869", NULL,
- "CSIBM870", NULL,
- "CSIBM871", NULL,
- "CSIBM880", NULL,
- "CSIBM891", NULL,
- "CSIBM903", NULL,
- "CSIBM904", NULL,
- "CSIBM905", NULL,
- "CSIBM918", NULL,
- "CSIBM922", NULL,
- "CSIBM930", NULL,
- "CSIBM932", NULL,
- "CSIBM933", NULL,
- "CSIBM935", NULL,
- "CSIBM937", NULL,
- "CSIBM939", NULL,
- "CSIBM943", NULL,
- "CSIBM1026", NULL,
- "CSIBM1124", NULL,
- "CSIBM1129", NULL,
- "CSIBM1132", NULL,
- "CSIBM1133", NULL,
- "CSIBM1160", NULL,
- "CSIBM1161", NULL,
- "CSIBM1163", NULL,
- "CSIBM1164", NULL,
- "CSIBM11621162", NULL,
- "CSISO4UNITEDKINGDOM", NULL,
- "CSISO10SWEDISH", NULL,
- "CSISO11SWEDISHFORNAMES", NULL,
- "CSISO14JISC6220RO", NULL,
- "CSISO15ITALIAN", NULL,
- "CSISO16PORTUGESE", NULL,
- "CSISO17SPANISH", NULL,
- "CSISO18GREEK7OLD", NULL,
- "CSISO19LATINGREEK", NULL,
- "CSISO21GERMAN", NULL,
- "CSISO25FRENCH", NULL,
- "CSISO27LATINGREEK1", NULL,
- "CSISO49INIS", NULL,
- "CSISO50INIS8", NULL,
- "CSISO51INISCYRILLIC", NULL,
- "CSISO58GB1988", NULL,
- "CSISO60DANISHNORWEGIAN", NULL,
- "CSISO60NORWEGIAN1", NULL,
- "CSISO61NORWEGIAN2", NULL,
- "CSISO69FRENCH", NULL,
- "CSISO84PORTUGUESE2", NULL,
- "CSISO85SPANISH2", NULL,
- "CSISO86HUNGARIAN", NULL,
- "CSISO88GREEK7", NULL,
- "CSISO89ASMO449", NULL,
- "CSISO90", NULL,
- "CSISO92JISC62991984B", NULL,
- "CSISO99NAPLPS", NULL,
- "CSISO103T618BIT", NULL,
- "CSISO111ECMACYRILLIC", NULL,
- "CSISO121CANADIAN1", NULL,
- "CSISO122CANADIAN2", NULL,
- "CSISO139CSN369103", NULL,
- "CSISO141JUSIB1002", NULL,
- "CSISO143IECP271", NULL,
- "CSISO150", NULL,
- "CSISO150GREEKCCITT", NULL,
- "CSISO151CUBA", NULL,
- "CSISO153GOST1976874", NULL,
- "CSISO646DANISH", NULL,
- "CSISO2022CN", NULL,
- "CSISO2022JP", NULL,
- "CSISO2022JP2", NULL,
- "CSISO2022KR", NULL,
- "CSISO2033", NULL,
- "CSISO5427CYRILLIC", NULL,
- "CSISO5427CYRILLIC1981", NULL,
- "CSISO5428GREEK", NULL,
- "CSISO10367BOX", NULL,
- "CSISOLATIN1", NULL,
- "CSISOLATIN2", NULL,
- "CSISOLATIN3", NULL,
- "CSISOLATIN4", NULL,
- "CSISOLATIN5", NULL,
- "CSISOLATIN6", NULL,
- "CSISOLATINARABIC", NULL,
- "CSISOLATINCYRILLIC", NULL,
- "CSISOLATINGREEK", NULL,
- "CSISOLATINHEBREW", NULL,
- "CSKOI8R", NULL,
- "CSKSC5636", NULL,
- "CSMACINTOSH", NULL,
- "CSNATSDANO", NULL,
- "CSNATSSEFI", NULL,
- "CSN_369103", NULL,
- "CSPC8CODEPAGE437", NULL,
- "CSPC775BALTIC", NULL,
- "CSPC850MULTILINGUAL", NULL,
- "CSPC862LATINHEBREW", NULL,
- "CSPCP852", NULL,
- "CSSHIFTJIS", NULL,
- "CSUCS4", NULL,
- "CSUNICODE", NULL,
- "CSWINDOWS31J", NULL,
- "CUBA", NULL,
- "CWI-2", NULL,
- "CWI", NULL,
- "CYRILLIC", NULL,
- "DE", NULL,
- "DEC-MCS", NULL,
- "DEC", NULL,
- "DECMCS", NULL,
- "DIN_66003", NULL,
- "DK", NULL,
- "DS2089", NULL,
- "DS_2089", NULL,
- "E13B", NULL,
- "EBCDIC-AT-DE-A", NULL,
- "EBCDIC-AT-DE", NULL,
- "EBCDIC-BE", NULL,
- "EBCDIC-BR", NULL,
- "EBCDIC-CA-FR", NULL,
- "EBCDIC-CP-AR1", NULL,
- "EBCDIC-CP-AR2", NULL,
- "EBCDIC-CP-BE", NULL,
- "EBCDIC-CP-CA", NULL,
- "EBCDIC-CP-CH", NULL,
- "EBCDIC-CP-DK", NULL,
- "EBCDIC-CP-ES", NULL,
- "EBCDIC-CP-FI", NULL,
- "EBCDIC-CP-FR", NULL,
- "EBCDIC-CP-GB", NULL,
- "EBCDIC-CP-GR", NULL,
- "EBCDIC-CP-HE", NULL,
- "EBCDIC-CP-IS", NULL,
- "EBCDIC-CP-IT", NULL,
- "EBCDIC-CP-NL", NULL,
- "EBCDIC-CP-NO", NULL,
- "EBCDIC-CP-ROECE", NULL,
- "EBCDIC-CP-SE", NULL,
- "EBCDIC-CP-TR", NULL,
- "EBCDIC-CP-US", NULL,
- "EBCDIC-CP-WT", NULL,
- "EBCDIC-CP-YU", NULL,
- "EBCDIC-CYRILLIC", NULL,
- "EBCDIC-DK-NO-A", NULL,
- "EBCDIC-DK-NO", NULL,
- "EBCDIC-ES-A", NULL,
- "EBCDIC-ES-S", NULL,
- "EBCDIC-ES", NULL,
- "EBCDIC-FI-SE-A", NULL,
- "EBCDIC-FI-SE", NULL,
- "EBCDIC-FR", NULL,
- "EBCDIC-GREEK", NULL,
- "EBCDIC-INT", NULL,
- "EBCDIC-INT1", NULL,
- "EBCDIC-IS-FRISS", NULL,
- "EBCDIC-IT", NULL,
- "EBCDIC-JP-E", NULL,
- "EBCDIC-JP-KANA", NULL,
- "EBCDIC-PT", NULL,
- "EBCDIC-UK", NULL,
- "EBCDIC-US", NULL,
- "EBCDICATDE", NULL,
- "EBCDICATDEA", NULL,
- "EBCDICCAFR", NULL,
- "EBCDICDKNO", NULL,
- "EBCDICDKNOA", NULL,
- "EBCDICES", NULL,
- "EBCDICESA", NULL,
- "EBCDICESS", NULL,
- "EBCDICFISE", NULL,
- "EBCDICFISEA", NULL,
- "EBCDICFR", NULL,
- "EBCDICISFRISS", NULL,
- "EBCDICIT", NULL,
- "EBCDICPT", NULL,
- "EBCDICUK", NULL,
- "EBCDICUS", NULL,
- "ECMA-114", NULL,
- "ECMA-118", NULL,
- "ECMA-128", NULL,
- "ECMA-CYRILLIC", NULL,
- "ECMACYRILLIC", NULL,
- "ELOT_928", NULL,
- "ES", NULL,
- "ES2", NULL,
- "EUC-CN", NULL,
- "EUC-JISX0213", NULL,
- "EUC-JP-MS", NULL,
- "EUC-JP", NULL,
- "EUC-KR", NULL,
- "EUC-TW", NULL,
- "EUCCN", NULL,
- "EUCJP-MS", NULL,
- "EUCJP-OPEN", NULL,
- "EUCJP-WIN", NULL,
- "EUCJP", NULL,
- "EUCKR", NULL,
- "EUCTW", NULL,
- "FI", NULL,
- "FR", NULL,
- "GB", NULL,
- "GB2312", NULL,
- "GB13000", NULL,
- "GB18030", NULL,
- "GBK", NULL,
- "GB_1988-80", NULL,
- "GB_198880", NULL,
- "GEORGIAN-ACADEMY", NULL,
- "GEORGIAN-PS", NULL,
- "GOST_19768-74", NULL,
- "GOST_19768", NULL,
- "GOST_1976874", NULL,
- "GREEK-CCITT", NULL,
- "GREEK", NULL,
- "GREEK7-OLD", NULL,
- "GREEK7", NULL,
- "GREEK7OLD", NULL,
- "GREEK8", NULL,
- "GREEKCCITT", NULL,
- "HEBREW", NULL,
- "HP-ROMAN8", NULL,
- "HPROMAN8", NULL,
- "HU", NULL,
- "IBM-856", NULL,
- "IBM-922", NULL,
- "IBM-930", NULL,
- "IBM-932", NULL,
- "IBM-933", NULL,
- "IBM-935", NULL,
- "IBM-937", NULL,
- "IBM-939", NULL,
- "IBM-943", NULL,
- "IBM-1046", NULL,
- "IBM-1047", NULL,
- "IBM-1124", NULL,
- "IBM-1129", NULL,
- "IBM-1132", NULL,
- "IBM-1133", NULL,
- "IBM-1160", NULL,
- "IBM-1161", NULL,
- "IBM-1162", NULL,
- "IBM-1163", NULL,
- "IBM-1164", NULL,
- "IBM037", NULL,
- "IBM038", NULL,
- "IBM256", NULL,
- "IBM273", NULL,
- "IBM274", NULL,
- "IBM275", NULL,
- "IBM277", NULL,
- "IBM278", NULL,
- "IBM280", NULL,
- "IBM281", NULL,
- "IBM284", NULL,
- "IBM285", NULL,
- "IBM290", NULL,
- "IBM297", NULL,
- "IBM367", NULL,
- "IBM420", NULL,
- "IBM423", NULL,
- "IBM424", NULL,
- "IBM437", NULL,
- "IBM500", NULL,
- "IBM775", NULL,
- "IBM813", NULL,
- "IBM819", NULL,
- "IBM848", NULL,
- "IBM850", NULL,
- "IBM851", NULL,
- "IBM852", NULL,
- "IBM855", NULL,
- "IBM856", NULL,
- "IBM857", NULL,
- "IBM860", NULL,
- "IBM861", NULL,
- "IBM862", NULL,
- "IBM863", NULL,
- "IBM864", NULL,
- "IBM865", NULL,
- "IBM866", NULL,
- "IBM866NAV", NULL,
- "IBM868", NULL,
- "IBM869", NULL,
- "IBM870", NULL,
- "IBM871", NULL,
- "IBM874", NULL,
- "IBM875", NULL,
- "IBM880", NULL,
- "IBM891", NULL,
- "IBM903", NULL,
- "IBM904", NULL,
- "IBM905", NULL,
- "IBM912", NULL,
- "IBM915", NULL,
- "IBM916", NULL,
- "IBM918", NULL,
- "IBM920", NULL,
- "IBM922", NULL,
- "IBM930", NULL,
- "IBM932", NULL,
- "IBM933", NULL,
- "IBM935", NULL,
- "IBM937", NULL,
- "IBM939", NULL,
- "IBM943", NULL,
- "IBM1004", NULL,
- "IBM1026", NULL,
- "IBM1046", NULL,
- "IBM1047", NULL,
- "IBM1089", NULL,
- "IBM1124", NULL,
- "IBM1129", NULL,
- "IBM1132", NULL,
- "IBM1133", NULL,
- "IBM1160", NULL,
- "IBM1161", NULL,
- "IBM1162", NULL,
- "IBM1163", NULL,
- "IBM1164", NULL,
- "IEC_P27-1", NULL,
- "IEC_P271", NULL,
- "INIS-8", NULL,
- "INIS-CYRILLIC", NULL,
- "INIS", NULL,
- "INIS8", NULL,
- "INISCYRILLIC", NULL,
- "ISIRI-3342", NULL,
- "ISIRI3342", NULL,
- "ISO-2022-CN-EXT", NULL,
- "ISO-2022-CN", NULL,
- "ISO-2022-JP-2", NULL,
- "ISO-2022-JP-3", NULL,
- "ISO-2022-JP", NULL,
- "ISO-2022-KR", NULL,
- "ISO-8859-1", NULL,
- "ISO-8859-2", NULL,
- "ISO-8859-3", NULL,
- "ISO-8859-4", NULL,
- "ISO-8859-5", NULL,
- "ISO-8859-6", NULL,
- "ISO-8859-7", NULL,
- "ISO-8859-8", NULL,
- "ISO-8859-9", NULL,
- "ISO-8859-10", NULL,
- "ISO-8859-11", NULL,
- "ISO-8859-13", NULL,
- "ISO-8859-14", NULL,
- "ISO-8859-15", NULL,
- "ISO-8859-16", NULL,
- "ISO-10646", NULL,
- "UCS2", NULL,
- "UCS4", NULL,
- "UTF-8", NULL,
- "UTF8", NULL,
- "ISO-CELTIC", NULL,
- "ISO-IR-4", NULL,
- "ISO-IR-6", NULL,
- "ISO-IR-8-1", NULL,
- "ISO-IR-9-1", NULL,
- "ISO-IR-10", NULL,
- "ISO-IR-11", NULL,
- "ISO-IR-14", NULL,
- "ISO-IR-15", NULL,
- "ISO-IR-16", NULL,
- "ISO-IR-17", NULL,
- "ISO-IR-18", NULL,
- "ISO-IR-19", NULL,
- "ISO-IR-21", NULL,
- "ISO-IR-25", NULL,
- "ISO-IR-27", NULL,
- "ISO-IR-37", NULL,
- "ISO-IR-49", NULL,
- "ISO-IR-50", NULL,
- "ISO-IR-51", NULL,
- "ISO-IR-54", NULL,
- "ISO-IR-55", NULL,
- "ISO-IR-57", NULL,
- "ISO-IR-60", NULL,
- "ISO-IR-61", NULL,
- "ISO-IR-69", NULL,
- "ISO-IR-84", NULL,
- "ISO-IR-85", NULL,
- "ISO-IR-86", NULL,
- "ISO-IR-88", NULL,
- "ISO-IR-89", NULL,
- "ISO-IR-90", NULL,
- "ISO-IR-92", NULL,
- "ISO-IR-98", NULL,
- "ISO-IR-99", NULL,
- "ISO-IR-100", NULL,
- "ISO-IR-101", NULL,
- "ISO-IR-103", NULL,
- "ISO-IR-109", NULL,
- "ISO-IR-110", NULL,
- "ISO-IR-111", NULL,
- "ISO-IR-121", NULL,
- "ISO-IR-122", NULL,
- "ISO-IR-126", NULL,
- "ISO-IR-127", NULL,
- "ISO-IR-138", NULL,
- "ISO-IR-139", NULL,
- "ISO-IR-141", NULL,
- "ISO-IR-143", NULL,
- "ISO-IR-144", NULL,
- "ISO-IR-148", NULL,
- "ISO-IR-150", NULL,
- "ISO-IR-151", NULL,
- "ISO-IR-153", NULL,
- "ISO-IR-155", NULL,
- "ISO-IR-156", NULL,
- "ISO-IR-157", NULL,
- "ISO-IR-166", NULL,
- "ISO-IR-179", NULL,
- "ISO-IR-193", NULL,
- "ISO-IR-197", NULL,
- "ISO-IR-199", NULL,
- "ISO-IR-203", NULL,
- "ISO-IR-209", NULL,
- "ISO-IR-226", NULL,
- "ISO646-CA", NULL,
- "ISO646-CA2", NULL,
- "ISO646-CN", NULL,
- "ISO646-CU", NULL,
- "ISO646-DE", NULL,
- "ISO646-DK", NULL,
- "ISO646-ES", NULL,
- "ISO646-ES2", NULL,
- "ISO646-FI", NULL,
- "ISO646-FR", NULL,
- "ISO646-FR1", NULL,
- "ISO646-GB", NULL,
- "ISO646-HU", NULL,
- "ISO646-IT", NULL,
- "ISO646-JP-OCR-B", NULL,
- "ISO646-JP", NULL,
- "ISO646-KR", NULL,
- "ISO646-NO", NULL,
- "ISO646-NO2", NULL,
- "ISO646-PT", NULL,
- "ISO646-PT2", NULL,
- "ISO646-SE", NULL,
- "ISO646-SE2", NULL,
- "ISO646-US", NULL,
- "ISO646-YU", NULL,
- "ISO2022CN", NULL,
- "ISO2022CNEXT", NULL,
- "ISO2022JP", NULL,
- "ISO2022JP2", NULL,
- "ISO2022KR", NULL,
- "ISO6937", NULL,
- "ISO8859-1", NULL,
- "ISO8859-2", NULL,
- "ISO8859-3", NULL,
- "ISO8859-4", NULL,
- "ISO8859-5", NULL,
- "ISO8859-6", NULL,
- "ISO8859-7", NULL,
- "ISO8859-8", NULL,
- "ISO8859-9", NULL,
- "ISO8859-10", NULL,
- "ISO8859-11", NULL,
- "ISO8859-13", NULL,
- "ISO8859-14", NULL,
- "ISO8859-15", NULL,
- "ISO8859-16", NULL,
- "ISO88591", NULL,
- "ISO88592", NULL,
- "ISO88593", NULL,
- "ISO88594", NULL,
- "ISO88595", NULL,
- "ISO88596", NULL,
- "ISO88597", NULL,
- "ISO88598", NULL,
- "ISO88599", NULL,
- "ISO885910", NULL,
- "ISO885911", NULL,
- "ISO885913", NULL,
- "ISO885914", NULL,
- "ISO885915", NULL,
- "ISO885916", NULL,
- "ISO_646.IRV:1991", NULL,
- "ISO_2033-1983", NULL,
- "ISO_2033", NULL,
- "ISO_5427-EXT", NULL,
- "ISO_5427", NULL,
- "ISO_5427:1981", NULL,
- "ISO_5427EXT", NULL,
- "ISO_5428", NULL,
- "ISO_5428:1980", NULL,
- "ISO_6937-2", NULL,
- "ISO_6937-2:1983", NULL,
- "ISO_6937", NULL,
- "ISO_6937:1992", NULL,
- "ISO_8859-1", NULL,
- "ISO_8859-1:1987", NULL,
- "ISO_8859-2", NULL,
- "ISO_8859-2:1987", NULL,
- "ISO_8859-3", NULL,
- "ISO_8859-3:1988", NULL,
- "ISO_8859-4", NULL,
- "ISO_8859-4:1988", NULL,
- "ISO_8859-5", NULL,
- "ISO_8859-5:1988", NULL,
- "ISO_8859-6", NULL,
- "ISO_8859-6:1987", NULL,
- "ISO_8859-7", NULL,
- "ISO_8859-7:1987", NULL,
- "ISO_8859-7:2003", NULL,
- "ISO_8859-8", NULL,
- "ISO_8859-8:1988", NULL,
- "ISO_8859-9", NULL,
- "ISO_8859-9:1989", NULL,
- "ISO_8859-10", NULL,
- "ISO_8859-10:1992", NULL,
- "ISO_8859-14", NULL,
- "ISO_8859-14:1998", NULL,
- "ISO_8859-15", NULL,
- "ISO_8859-15:1998", NULL,
- "ISO_8859-16", NULL,
- "ISO_8859-16:2001", NULL,
- "ISO_9036", NULL,
- "ISO_10367-BOX", NULL,
- "ISO_10367BOX", NULL,
- "ISO_69372", NULL,
- "IT", NULL,
- "JIS_C6220-1969-RO", NULL,
- "JIS_C6229-1984-B", NULL,
- "JIS_C62201969RO", NULL,
- "JIS_C62291984B", NULL,
- "JOHAB", NULL,
- "JP-OCR-B", NULL,
- "JP", NULL,
- "JS", NULL,
- "JUS_I.B1.002", NULL,
- "KOI-7", NULL,
- "KOI-8", NULL,
- "KOI8-R", NULL,
- "KOI8-T", NULL,
- "KOI8-U", NULL,
- "KOI8", NULL,
- "KOI8R", NULL,
- "KOI8U", NULL,
- "KSC5636", NULL,
- "L1", NULL,
- "L2", NULL,
- "L3", NULL,
- "L4", NULL,
- "L5", NULL,
- "L6", NULL,
- "L7", NULL,
- "L8", NULL,
- "L10", NULL,
- "LATIN-9", NULL,
- "LATIN-GREEK-1", NULL,
- "LATIN-GREEK", NULL,
- "LATIN1", NULL,
- "LATIN2", NULL,
- "LATIN3", NULL,
- "LATIN4", NULL,
- "LATIN5", NULL,
- "LATIN6", NULL,
- "LATIN7", NULL,
- "LATIN8", NULL,
- "LATIN10", NULL,
- "LATINGREEK", NULL,
- "LATINGREEK1", NULL,
- "MAC-CYRILLIC", NULL,
- "MAC-IS", NULL,
- "MAC-SAMI", NULL,
- "MAC-UK", NULL,
- "MAC", NULL,
- "MACCYRILLIC", NULL,
- "MACINTOSH", NULL,
- "MACIS", NULL,
- "MACUK", NULL,
- "MACUKRAINIAN", NULL,
- "MS-ANSI", NULL,
- "MS-ARAB", NULL,
- "MS-CYRL", NULL,
- "MS-EE", NULL,
- "MS-GREEK", NULL,
- "MS-HEBR", NULL,
- "MS-MAC-CYRILLIC", NULL,
- "MS-TURK", NULL,
- "MS932", NULL,
- "MS936", NULL,
- "MSCP949", NULL,
- "MSCP1361", NULL,
- "MSMACCYRILLIC", NULL,
- "MSZ_7795.3", NULL,
- "MS_KANJI", NULL,
- "NAPLPS", NULL,
- "NATS-DANO", NULL,
- "NATS-SEFI", NULL,
- "NATSDANO", NULL,
- "NATSSEFI", NULL,
- "NC_NC0010", NULL,
- "NC_NC00-10", NULL,
- "NC_NC00-10:81", NULL,
- "NF_Z_62-010", NULL,
- "NF_Z_62-010_(1973)", NULL,
- "NF_Z_62-010_1973", NULL,
- "NF_Z_62010", NULL,
- "NF_Z_62010_1973", NULL,
- "NO", NULL,
- "NO2", NULL,
- "NS_4551-1", NULL,
- "NS_4551-2", NULL,
- "NS_45511", NULL,
- "NS_45512", NULL,
- "OS2LATIN1", NULL,
- "OSF00010001", NULL,
- "OSF00010002", NULL,
- "OSF00010003", NULL,
- "OSF00010004", NULL,
- "OSF00010005", NULL,
- "OSF00010006", NULL,
- "OSF00010007", NULL,
- "OSF00010008", NULL,
- "OSF00010009", NULL,
- "OSF0001000A", NULL,
- "OSF00010020", NULL,
- "OSF00010100", NULL,
- "OSF00010101", NULL,
- "OSF00010102", NULL,
- "OSF00010104", NULL,
- "OSF00010105", NULL,
- "OSF00010106", NULL,
- "OSF00030010", NULL,
- "OSF0004000A", NULL,
- "OSF0005000A", NULL,
- "OSF05010001", NULL,
- "OSF100201A4", NULL,
- "OSF100201A8", NULL,
- "OSF100201B5", NULL,
- "OSF100201F4", NULL,
- "OSF100203B5", NULL,
- "OSF1002011C", NULL,
- "OSF1002011D", NULL,
- "OSF1002035D", NULL,
- "OSF1002035E", NULL,
- "OSF1002035F", NULL,
- "OSF1002036B", NULL,
- "OSF1002037B", NULL,
- "OSF10010001", NULL,
- "OSF10020025", NULL,
- "OSF10020111", NULL,
- "OSF10020115", NULL,
- "OSF10020116", NULL,
- "OSF10020118", NULL,
- "OSF10020122", NULL,
- "OSF10020129", NULL,
- "OSF10020352", NULL,
- "OSF10020354", NULL,
- "OSF10020357", NULL,
- "OSF10020359", NULL,
- "OSF10020360", NULL,
- "OSF10020364", NULL,
- "OSF10020365", NULL,
- "OSF10020366", NULL,
- "OSF10020367", NULL,
- "OSF10020370", NULL,
- "OSF10020387", NULL,
- "OSF10020388", NULL,
- "OSF10020396", NULL,
- "OSF10020402", NULL,
- "OSF10020417", NULL,
- "PT", NULL,
- "PT2", NULL,
- "PT154", NULL,
- "R8", NULL,
- "RK1048", NULL,
- "ROMAN8", NULL,
- "RUSCII", NULL,
- "SE", NULL,
- "SE2", NULL,
- "SEN_850200_B", NULL,
- "SEN_850200_C", NULL,
- "SHIFT-JIS", NULL,
- "SHIFT_JIS", NULL,
- "SHIFT_JISX0213", NULL,
- "SJIS-OPEN", NULL,
- "SJIS-WIN", NULL,
- "SJIS", NULL,
- "SS636127", NULL,
- "STRK1048-2002", NULL,
- "ST_SEV_358-88", NULL,
- "T.61-8BIT", NULL,
- "T.61", NULL,
- "T.618BIT", NULL,
- "TCVN-5712", NULL,
- "TCVN", NULL,
- "TCVN5712-1", NULL,
- "TCVN5712-1:1993", NULL,
- "TIS-620", NULL,
- "TIS620-0", NULL,
- "TIS620.2529-1", NULL,
- "TIS620.2533-0", NULL,
- "TIS620", NULL,
- "TS-5881", NULL,
- "TSCII", NULL,
- "UCS-2", NULL,
- "UCS-2BE", NULL,
- "UCS-2LE", NULL,
- "UCS-4", NULL,
- "UCS-4BE", NULL,
- "UCS-4LE", NULL,
- "UCS2", NULL,
- "UCS4", NULL,
- "UHC", NULL,
- "UJIS", NULL,
- "UK", NULL,
- "UNICODE", NULL,
- "UNICODEBIG", NULL,
- "UNICODELITTLE", NULL,
- "US-ASCII", NULL,
- "US", NULL,
- "UTF-7", NULL,
- "UTF-8", NULL,
- "UTF-16", NULL,
- "UTF-16BE", NULL,
- "UTF-16LE", NULL,
- "UTF-32", NULL,
- "UTF-32BE", NULL,
- "UTF-32LE", NULL,
- "UTF7", NULL,
- "UTF8", NULL,
- "UTF16", NULL,
- "UTF16BE", NULL,
- "UTF16LE", NULL,
- "UTF32", NULL,
- "UTF32BE", NULL,
- "UTF32LE", NULL,
- "VISCII", NULL,
- "WCHAR_T", NULL,
- "WIN-SAMI-2", NULL,
- "WINBALTRIM", NULL,
- "WINDOWS-31J", NULL,
- "WINDOWS-874", NULL,
- "WINDOWS-936", NULL,
- "WINDOWS-1250", NULL,
- "WINDOWS-1251", NULL,
- "WINDOWS-1252", NULL,
- "WINDOWS-1253", NULL,
- "WINDOWS-1254", NULL,
- "WINDOWS-1255", NULL,
- "WINDOWS-1256", NULL,
- "WINDOWS-1257", NULL,
- "WINDOWS-1258", NULL,
- "WINSAMI2", NULL,
- "WS2", NULL,
- "YU", NULL,
- NULL
- };
+++ /dev/null
-
-
-#define YY_INT_ALIGNED short int
-
-/* A lexical scanner generated by flex */
-
-#define yy_create_buffer librecode_yy_create_buffer
-#define yy_delete_buffer librecode_yy_delete_buffer
-#define yy_flex_debug librecode_yy_flex_debug
-#define yy_init_buffer librecode_yy_init_buffer
-#define yy_flush_buffer librecode_yy_flush_buffer
-#define yy_load_buffer_state librecode_yy_load_buffer_state
-#define yy_switch_to_buffer librecode_yy_switch_to_buffer
-#define yyin librecode_yyin
-#define yyleng librecode_yyleng
-#define yylex librecode_yylex
-#define yylineno librecode_yylineno
-#define yyout librecode_yyout
-#define yyrestart librecode_yyrestart
-#define yytext librecode_yytext
-#define yywrap librecode_yywrap
-#define yyalloc librecode_yyalloc
-#define yyrealloc librecode_yyrealloc
-#define yyfree librecode_yyfree
-
-#define FLEX_SCANNER
-#define YY_FLEX_MAJOR_VERSION 2
-#define YY_FLEX_MINOR_VERSION 5
-#define YY_FLEX_SUBMINOR_VERSION 35
-#if YY_FLEX_SUBMINOR_VERSION > 0
-#define FLEX_BETA
-#endif
-
-/* First, we deal with platform-specific or compiler-specific issues. */
-
-/* begin standard C headers. */
-#include <stdio.h>
-#include <string.h>
-#include <errno.h>
-#include <stdlib.h>
-
-/* end standard C headers. */
-
-/* flex integer type definitions */
-
-#ifndef FLEXINT_H
-#define FLEXINT_H
-
-/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
-
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
-
-/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
- * if you want the limit (max/min) macros for int types.
- */
-#ifndef __STDC_LIMIT_MACROS
-#define __STDC_LIMIT_MACROS 1
-#endif
-
-#include <inttypes.h>
-typedef int8_t flex_int8_t;
-typedef uint8_t flex_uint8_t;
-typedef int16_t flex_int16_t;
-typedef uint16_t flex_uint16_t;
-typedef int32_t flex_int32_t;
-typedef uint32_t flex_uint32_t;
-#else
-typedef signed char flex_int8_t;
-typedef short int flex_int16_t;
-typedef int flex_int32_t;
-typedef unsigned char flex_uint8_t;
-typedef unsigned short int flex_uint16_t;
-typedef unsigned int flex_uint32_t;
-
-/* Limits of integral types. */
-#ifndef INT8_MIN
-#define INT8_MIN (-128)
-#endif
-#ifndef INT16_MIN
-#define INT16_MIN (-32767-1)
-#endif
-#ifndef INT32_MIN
-#define INT32_MIN (-2147483647-1)
-#endif
-#ifndef INT8_MAX
-#define INT8_MAX (127)
-#endif
-#ifndef INT16_MAX
-#define INT16_MAX (32767)
-#endif
-#ifndef INT32_MAX
-#define INT32_MAX (2147483647)
-#endif
-#ifndef UINT8_MAX
-#define UINT8_MAX (255U)
-#endif
-#ifndef UINT16_MAX
-#define UINT16_MAX (65535U)
-#endif
-#ifndef UINT32_MAX
-#define UINT32_MAX (4294967295U)
-#endif
-
-#endif /* ! C99 */
-
-#endif /* ! FLEXINT_H */
-
-#ifdef __cplusplus
-
-/* The "const" storage-class-modifier is valid. */
-#define YY_USE_CONST
-
-#else /* ! __cplusplus */
-
-/* C99 requires __STDC__ to be defined as 1. */
-#if defined (__STDC__)
-
-#define YY_USE_CONST
-
-#endif /* defined (__STDC__) */
-#endif /* ! __cplusplus */
-
-#ifdef YY_USE_CONST
-#define yyconst const
-#else
-#define yyconst
-#endif
-
-/* Returned upon end-of-file. */
-#define YY_NULL 0
-
-/* Promotes a possibly negative, possibly signed char to an unsigned
- * integer for use as an array index. If the signed char is negative,
- * we want to instead treat it as an 8-bit unsigned char, hence the
- * double cast.
- */
-#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
-
-/* Enter a start condition. This macro really ought to take a parameter,
- * but we do it the disgusting crufty way forced on us by the ()-less
- * definition of BEGIN.
- */
-#define BEGIN (yy_start) = 1 + 2 *
-
-/* Translate the current start state into a value that can be later handed
- * to BEGIN to return to the state. The YYSTATE alias is for lex
- * compatibility.
- */
-#define YY_START (((yy_start) - 1) / 2)
-#define YYSTATE YY_START
-
-/* Action number for EOF rule of a given start state. */
-#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
-
-/* Special action meaning "start processing a new file". */
-#define YY_NEW_FILE librecode_yyrestart(librecode_yyin )
-
-#define YY_END_OF_BUFFER_CHAR 0
-
-/* Size of default input buffer. */
-#ifndef YY_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k.
- * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case.
- * Ditto for the __ia64__ case accordingly.
- */
-#define YY_BUF_SIZE 32768
-#else
-#define YY_BUF_SIZE 16384
-#endif /* __ia64__ */
-#endif
-
-/* The state buf must be large enough to hold one state per character in the main buffer.
- */
-#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
-
-#ifndef YY_TYPEDEF_YY_BUFFER_STATE
-#define YY_TYPEDEF_YY_BUFFER_STATE
-typedef struct yy_buffer_state *YY_BUFFER_STATE;
-#endif
-
-extern int librecode_yyleng;
-
-extern FILE *librecode_yyin, *librecode_yyout;
-
-#define EOB_ACT_CONTINUE_SCAN 0
-#define EOB_ACT_END_OF_FILE 1
-#define EOB_ACT_LAST_MATCH 2
-
- #define YY_LESS_LINENO(n)
-
-/* Return all but the first "n" matched characters back to the input stream. */
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up librecode_yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- *yy_cp = (yy_hold_char); \
- YY_RESTORE_YY_MORE_OFFSET \
- (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
- YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */ \
- } \
- while ( 0 )
-
-#define unput(c) yyunput( c, (yytext_ptr) )
-
-#ifndef YY_TYPEDEF_YY_SIZE_T
-#define YY_TYPEDEF_YY_SIZE_T
-typedef size_t yy_size_t;
-#endif
-
-#ifndef YY_STRUCT_YY_BUFFER_STATE
-#define YY_STRUCT_YY_BUFFER_STATE
-struct yy_buffer_state
- {
- FILE *yy_input_file;
-
- char *yy_ch_buf; /* input buffer */
- char *yy_buf_pos; /* current position in input buffer */
-
- /* Size of input buffer in bytes, not including room for EOB
- * characters.
- */
- yy_size_t yy_buf_size;
-
- /* Number of characters read into yy_ch_buf, not including EOB
- * characters.
- */
- int yy_n_chars;
-
- /* Whether we "own" the buffer - i.e., we know we created it,
- * and can realloc() it to grow it, and should free() it to
- * delete it.
- */
- int yy_is_our_buffer;
-
- /* Whether this is an "interactive" input source; if so, and
- * if we're using stdio for input, then we want to use getc()
- * instead of fread(), to make sure we stop fetching input after
- * each newline.
- */
- int yy_is_interactive;
-
- /* Whether we're considered to be at the beginning of a line.
- * If so, '^' rules will be active on the next match, otherwise
- * not.
- */
- int yy_at_bol;
-
- int yy_bs_lineno; /**< The line count. */
- int yy_bs_column; /**< The column count. */
-
- /* Whether to try to fill the input buffer when we reach the
- * end of it.
- */
- int yy_fill_buffer;
-
- int yy_buffer_status;
-
-#define YY_BUFFER_NEW 0
-#define YY_BUFFER_NORMAL 1
- /* When an EOF's been seen but there's still some text to process
- * then we mark the buffer as YY_EOF_PENDING, to indicate that we
- * shouldn't try reading from the input source any more. We might
- * still have a bunch of tokens to match, though, because of
- * possible backing-up.
- *
- * When we actually see the EOF, we change the status to "new"
- * (via librecode_yyrestart()), so that the user can continue scanning by
- * just pointing librecode_yyin at a new input file.
- */
-#define YY_BUFFER_EOF_PENDING 2
-
- };
-#endif /* !YY_STRUCT_YY_BUFFER_STATE */
-
-/* Stack of input buffers. */
-static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
-static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
-static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
-
-/* We provide macros for accessing buffer states in case in the
- * future we want to put the buffer states in a more general
- * "scanner state".
- *
- * Returns the top of the stack, or NULL.
- */
-#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
- ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
- : NULL)
-
-/* Same as previous macro, but useful when we know that the buffer stack is not
- * NULL or when we need an lvalue. For internal use only.
- */
-#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
-
-/* yy_hold_char holds the character lost when librecode_yytext is formed. */
-static char yy_hold_char;
-static int yy_n_chars; /* number of characters read into yy_ch_buf */
-int librecode_yyleng;
-
-/* Points to current character in buffer. */
-static char *yy_c_buf_p = (char *) 0;
-static int yy_init = 0; /* whether we need to initialize */
-static int yy_start = 0; /* start state number */
-
-/* Flag which is used to allow librecode_yywrap()'s to do buffer switches
- * instead of setting up a fresh librecode_yyin. A bit of a hack ...
- */
-static int yy_did_buffer_switch_on_eof;
-
-void librecode_yyrestart (FILE *input_file );
-void librecode_yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
-YY_BUFFER_STATE librecode_yy_create_buffer (FILE *file,int size );
-void librecode_yy_delete_buffer (YY_BUFFER_STATE b );
-void librecode_yy_flush_buffer (YY_BUFFER_STATE b );
-void librecode_yypush_buffer_state (YY_BUFFER_STATE new_buffer );
-void librecode_yypop_buffer_state (void );
-
-static void librecode_yyensure_buffer_stack (void );
-static void librecode_yy_load_buffer_state (void );
-static void librecode_yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
-
-#define YY_FLUSH_BUFFER librecode_yy_flush_buffer(YY_CURRENT_BUFFER )
-
-YY_BUFFER_STATE librecode_yy_scan_buffer (char *base,yy_size_t size );
-YY_BUFFER_STATE librecode_yy_scan_string (yyconst char *yy_str );
-YY_BUFFER_STATE librecode_yy_scan_bytes (yyconst char *bytes,int len );
-
-void *librecode_yyalloc (yy_size_t );
-void *librecode_yyrealloc (void *,yy_size_t );
-void librecode_yyfree (void * );
-
-#define yy_new_buffer librecode_yy_create_buffer
-
-#define yy_set_interactive(is_interactive) \
- { \
- if ( ! YY_CURRENT_BUFFER ){ \
- librecode_yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- librecode_yy_create_buffer(librecode_yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
- }
-
-#define yy_set_bol(at_bol) \
- { \
- if ( ! YY_CURRENT_BUFFER ){\
- librecode_yyensure_buffer_stack (); \
- YY_CURRENT_BUFFER_LVALUE = \
- librecode_yy_create_buffer(librecode_yyin,YY_BUF_SIZE ); \
- } \
- YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
- }
-
-#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
-
-/* Begin user sect3 */
-
-#define librecode_yywrap(n) 1
-#define YY_SKIP_YYWRAP
-
-typedef unsigned char YY_CHAR;
-
-FILE *librecode_yyin = (FILE *) 0, *librecode_yyout = (FILE *) 0;
-
-typedef int yy_state_type;
-
-extern int librecode_yylineno;
-
-int librecode_yylineno = 1;
-
-extern char *librecode_yytext;
-#define yytext_ptr librecode_yytext
-
-static yy_state_type yy_get_previous_state (void );
-static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
-static int yy_get_next_buffer (void );
-static void yy_fatal_error (yyconst char msg[] );
-
-/* Done after the current pattern has been matched and before the
- * corresponding action - sets up librecode_yytext.
- */
-#define YY_DO_BEFORE_ACTION \
- (yytext_ptr) = yy_bp; \
- librecode_yyleng = (size_t) (yy_cp - yy_bp); \
- (yy_hold_char) = *yy_cp; \
- *yy_cp = '\0'; \
- (yy_c_buf_p) = yy_cp;
-
-#define YY_NUM_RULES 208
-#define YY_END_OF_BUFFER 209
-/* This struct is not used in this scanner,
- but its presence is necessary. */
-struct yy_trans_info
- {
- flex_int32_t yy_verify;
- flex_int32_t yy_nxt;
- };
-static yyconst flex_int16_t yy_accept[598] =
- { 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 209, 208,
- 208, 208, 208, 208, 208, 208, 208, 208, 208, 208,
- 208, 208, 208, 208, 208, 208, 208, 208, 208, 208,
- 208, 208, 208, 208, 208, 208, 208, 208, 208, 208,
- 208, 65, 208, 208, 208, 208, 208, 208, 208, 208,
- 208, 208, 208, 208, 208, 208, 208, 208, 208, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 66, 83, 87, 69, 57,
- 58, 59, 60, 78, 81, 73, 147, 147, 110, 68,
-
- 0, 61, 0, 147, 147, 147, 147, 147, 147, 139,
- 147, 147, 62, 63, 0, 71, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 149, 0, 151, 150,
- 0, 0, 161, 162, 158, 0, 171, 170, 0, 0,
- 177, 176, 0, 183, 182, 148, 0, 154, 153, 0,
- 0, 167, 168, 164, 0, 174, 173, 0, 180, 179,
- 0, 186, 185, 1, 2, 7, 12, 16, 22, 27,
- 34, 39, 43, 49, 29, 54, 56, 4, 10, 14,
- 19, 25, 28, 31, 37, 41, 46, 52, 55, 8,
- 35, 23, 50, 5, 3, 6, 11, 9, 15, 13,
-
- 17, 20, 18, 21, 26, 24, 32, 38, 42, 47,
- 53, 30, 36, 40, 45, 51, 33, 44, 48, 92,
- 99, 103, 109, 114, 0, 121, 128, 138, 143, 145,
- 0, 89, 97, 101, 106, 112, 115, 0, 118, 126,
- 135, 141, 144, 0, 147, 93, 94, 0, 110, 0,
- 68, 0, 90, 98, 102, 107, 113, 0, 119, 127,
- 136, 142, 0, 88, 96, 100, 105, 111, 0, 117,
- 125, 134, 140, 0, 122, 123, 147, 147, 147, 147,
- 0, 147, 147, 147, 139, 0, 147, 116, 91, 104,
- 108, 120, 133, 137, 0, 0, 0, 0, 0, 0,
-
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 152, 156, 163, 160, 172, 0, 178, 184, 155, 157,
- 169, 166, 175, 181, 187, 132, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 130, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 93, 0, 94, 0, 147, 110, 68, 131, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 129, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 122,
- 0, 123, 0, 147, 95, 124, 147, 147, 0, 0,
- 147, 147, 72, 139, 147, 116, 0, 0, 0, 0,
-
- 0, 0, 0, 196, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 159, 0, 165, 132, 146, 0, 0, 130, 0,
- 0, 93, 94, 131, 0, 0, 129, 0, 0, 122,
- 123, 147, 147, 147, 147, 147, 72, 0, 147, 116,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 198,
- 0, 0, 202, 0, 0, 0, 0, 0, 201, 146,
- 0, 132, 132, 130, 130, 131, 131, 129, 129, 147,
- 80, 147, 0, 0, 0, 72, 67, 0, 0, 0,
- 0, 0, 0, 0, 207, 0, 0, 0, 0, 0,
-
- 0, 204, 0, 146, 147, 147, 0, 0, 0, 67,
- 0, 190, 0, 0, 206, 189, 0, 0, 0, 0,
- 200, 0, 0, 0, 205, 147, 147, 85, 84, 86,
- 0, 0, 67, 0, 0, 197, 0, 193, 0, 0,
- 0, 0, 147, 147, 85, 0, 84, 0, 86, 0,
- 0, 0, 0, 0, 0, 0, 191, 0, 0, 199,
- 203, 0, 0, 64, 70, 85, 84, 86, 0, 0,
- 0, 0, 0, 0, 188, 192, 194, 195, 64, 0,
- 70, 0, 0, 0, 82, 76, 77, 0, 64, 70,
- 79, 75, 0, 0, 0, 74, 0
-
- } ;
-
-static yyconst flex_int32_t yy_ec[256] =
- { 0,
- 1, 1, 1, 1, 1, 1, 1, 2, 3, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 3, 4, 5, 6, 7, 8, 9, 10, 1,
- 1, 1, 1, 11, 12, 1, 13, 1, 14, 15,
- 16, 17, 1, 1, 1, 1, 1, 18, 1, 19,
- 1, 20, 21, 1, 22, 23, 24, 25, 26, 25,
- 27, 28, 29, 30, 25, 30, 25, 31, 32, 25,
- 25, 25, 33, 34, 35, 25, 25, 25, 36, 25,
- 1, 37, 1, 38, 39, 40, 41, 42, 43, 44,
-
- 45, 46, 47, 48, 49, 30, 50, 51, 52, 53,
- 54, 55, 25, 56, 57, 58, 59, 25, 25, 60,
- 61, 25, 62, 1, 63, 64, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
-
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1
- } ;
-
-static yyconst flex_int32_t yy_meta[65] =
- { 0,
- 1, 1, 2, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 3, 3, 3, 3, 3, 3, 3, 3, 3,
- 3, 3, 3, 3, 3, 3, 1, 1, 1, 1,
- 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
- 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
- 3, 2, 1, 1
- } ;
-
-static yyconst flex_int16_t yy_base[611] =
- { 0,
- 0, 0, 0, 0, 2, 23, 87, 0, 943, 944,
- 940, 939, 938, 937, 936, 935, 934, 933, 932, 931,
- 930, 929, 928, 927, 926, 925, 924, 923, 922, 921,
- 920, 919, 918, 917, 916, 915, 876, 905, 874, 147,
- 873, 944, 190, 902, 10, 900, 216, 29, 900, 222,
- 223, 0, 869, 231, 897, 240, 237, 241, 246, 268,
- 308, 13, 14, 902, 901, 286, 894, 301, 318, 840,
- 341, 326, 893, 384, 422, 337, 891, 350, 358, 837,
- 382, 895, 392, 4, 251, 944, 944, 944, 460, 944,
- 944, 944, 944, 501, 944, 944, 250, 0, 13, 14,
-
- 542, 944, 583, 254, 181, 329, 15, 332, 316, 18,
- 212, 22, 944, 944, 396, 944, 3, 854, 24, 25,
- 844, 856, 843, 211, 112, 835, 944, 0, 944, 944,
- 382, 0, 884, 944, 944, 0, 944, 944, 29, 0,
- 944, 944, 0, 944, 944, 944, 0, 944, 944, 420,
- 0, 883, 944, 944, 0, 944, 944, 0, 944, 944,
- 0, 944, 944, 944, 944, 944, 944, 944, 944, 944,
- 944, 944, 944, 944, 944, 944, 944, 944, 944, 944,
- 944, 944, 944, 944, 944, 944, 944, 944, 944, 944,
- 944, 944, 944, 944, 944, 944, 944, 944, 944, 944,
-
- 944, 944, 944, 944, 944, 944, 944, 944, 944, 944,
- 944, 944, 944, 944, 944, 944, 944, 944, 944, 944,
- 944, 944, 944, 944, 843, 944, 944, 944, 944, 944,
- 624, 944, 944, 944, 944, 944, 944, 842, 944, 944,
- 944, 944, 944, 664, 158, 227, 290, 827, 318, 826,
- 345, 825, 944, 944, 944, 944, 944, 838, 944, 944,
- 944, 944, 704, 944, 944, 944, 944, 944, 837, 944,
- 944, 944, 944, 742, 362, 369, 383, 397, 406, 432,
- 410, 436, 408, 444, 453, 822, 466, 462, 944, 944,
- 944, 944, 944, 944, 512, 470, 842, 826, 829, 834,
-
- 827, 838, 829, 828, 827, 821, 34, 16, 833, 823,
- 944, 944, 944, 862, 944, 236, 944, 944, 944, 944,
- 944, 861, 944, 944, 944, 469, 807, 806, 805, 804,
- 803, 816, 801, 800, 799, 798, 797, 477, 796, 795,
- 794, 793, 792, 791, 804, 789, 788, 787, 786, 785,
- 487, 784, 490, 783, 944, 944, 944, 496, 782, 781,
- 780, 779, 778, 791, 776, 775, 774, 773, 497, 772,
- 771, 770, 769, 768, 781, 766, 765, 764, 763, 499,
- 762, 505, 761, 507, 944, 944, 523, 529, 760, 759,
- 508, 513, 510, 944, 544, 526, 758, 757, 756, 755,
-
- 754, 753, 752, 944, 755, 764, 771, 757, 751, 260,
- 750, 753, 296, 297, 740, 315, 739, 756, 754, 745,
- 752, 944, 366, 944, 532, 537, 729, 728, 538, 727,
- 726, 944, 944, 545, 723, 722, 551, 721, 719, 944,
- 944, 573, 577, 592, 600, 579, 581, 718, 589, 944,
- 733, 729, 726, 728, 727, 729, 718, 371, 707, 944,
- 715, 713, 944, 705, 711, 710, 394, 707, 944, 590,
- 692, 944, 944, 944, 944, 944, 944, 944, 944, 619,
- 595, 614, 741, 740, 352, 944, 605, 478, 693, 704,
- 502, 584, 699, 700, 944, 699, 702, 605, 701, 693,
-
- 691, 944, 616, 944, 633, 626, 147, 711, 130, 622,
- 641, 944, 637, 621, 944, 944, 622, 616, 626, 622,
- 944, 577, 560, 552, 944, 635, 646, 644, 652, 655,
- 330, 697, 944, 659, 541, 944, 533, 944, 661, 684,
- 511, 505, 684, 657, 665, 482, 669, 455, 688, 449,
- 450, 452, 496, 478, 477, 435, 944, 698, 702, 944,
- 944, 717, 719, 695, 707, 944, 944, 944, 459, 457,
- 345, 340, 330, 321, 944, 944, 944, 944, 718, 282,
- 726, 275, 247, 245, 944, 944, 944, 242, 944, 944,
- 944, 944, 225, 260, 181, 944, 944, 801, 803, 226,
-
- 222, 162, 160, 78, 71, 27, 5, 4, 1, 805
- } ;
-
-static yyconst flex_int16_t yy_def[611] =
- { 0,
- 598, 598, 598, 3, 598, 598, 597, 7, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 43, 597, 597, 597, 597, 597, 597,
- 597, 43, 43, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 599, 599, 599, 599,
-
- 597, 597, 597, 599, 599, 599, 599, 599, 599, 599,
- 599, 599, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 600, 597, 597,
- 597, 601, 597, 597, 597, 602, 597, 597, 597, 603,
- 597, 597, 604, 597, 597, 597, 605, 597, 597, 597,
- 606, 597, 597, 597, 607, 597, 597, 608, 597, 597,
- 609, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
-
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 599, 599, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 599, 599, 599, 597, 599, 599,
- 597, 599, 599, 599, 597, 597, 599, 599, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
-
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 610, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 610, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 610, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 610, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 599, 597, 597, 599, 599, 597, 597,
- 599, 599, 599, 597, 599, 597, 597, 597, 597, 597,
-
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 610, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 599, 599, 599, 599, 599, 597, 597, 599, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 599,
- 599, 599, 597, 597, 597, 597, 599, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
-
- 597, 597, 597, 597, 599, 599, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 599, 599, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 599, 599, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 599, 599, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 0, 597, 597, 597,
-
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597
- } ;
-
-static yyconst flex_int16_t yy_nxt[1009] =
- { 0,
- 597, 597, 245, 325, 11, 37, 324, 323, 177, 12,
- 13, 38, 14, 189, 128, 249, 251, 245, 15, 16,
- 285, 17, 39, 18, 245, 19, 37, 128, 20, 321,
- 21, 22, 38, 136, 23, 24, 190, 25, 40, 26,
- 27, 41, 28, 39, 29, 192, 136, 129, 30, 130,
- 316, 296, 31, 32, 297, 191, 33, 418, 34, 40,
- 35, 248, 41, 36, 299, 42, 137, 193, 138, 316,
- 282, 419, 300, 319, 250, 252, 248, 301, 288, 286,
- 318, 302, 416, 248, 303, 417, 42, 43, 43, 43,
- 43, 43, 43, 43, 43, 43, 44, 43, 43, 43,
-
- 43, 43, 43, 43, 43, 43, 43, 43, 45, 10,
- 46, 10, 47, 10, 10, 48, 49, 10, 50, 10,
- 49, 51, 10, 43, 52, 43, 53, 54, 10, 55,
- 10, 56, 10, 10, 10, 57, 10, 49, 10, 10,
- 58, 10, 10, 10, 49, 59, 10, 10, 43, 43,
- 43, 89, 90, 91, 92, 93, 94, 95, 96, 309,
- 245, 528, 317, 529, 315, 310, 531, 532, 97, 98,
- 98, 98, 98, 98, 98, 98, 98, 98, 99, 100,
- 98, 98, 98, 245, 101, 102, 103, 104, 105, 106,
- 98, 98, 107, 98, 98, 98, 98, 98, 108, 109,
-
- 110, 111, 98, 112, 98, 98, 98, 98, 113, 114,
- 115, 117, 118, 119, 245, 120, 121, 122, 123, 248,
- 132, 277, 124, 125, 313, 133, 140, 143, 311, 351,
- 117, 118, 119, 132, 126, 147, 121, 122, 123, 140,
- 143, 155, 248, 596, 151, 158, 124, 125, 147, 152,
- 161, 307, 245, 134, 155, 135, 245, 151, 158, 141,
- 144, 142, 145, 161, 423, 287, 595, 594, 148, 308,
- 149, 246, 196, 248, 156, 247, 157, 153, 159, 154,
- 160, 201, 204, 162, 423, 163, 164, 165, 352, 166,
- 166, 217, 353, 167, 275, 178, 168, 593, 276, 169,
-
- 460, 461, 170, 218, 219, 167, 456, 592, 171, 591,
- 179, 248, 172, 460, 461, 248, 173, 457, 245, 463,
- 249, 174, 168, 194, 175, 195, 176, 180, 177, 178,
- 170, 278, 463, 179, 245, 182, 180, 590, 197, 181,
- 198, 171, 182, 183, 589, 169, 184, 251, 184, 196,
- 181, 354, 185, 192, 172, 199, 186, 200, 509, 185,
- 284, 187, 173, 205, 380, 206, 188, 186, 189, 588,
- 469, 382, 279, 283, 207, 495, 212, 248, 202, 250,
- 203, 551, 280, 469, 552, 245, 174, 208, 495, 213,
- 281, 187, 587, 248, 193, 209, 176, 214, 502, 278,
-
- 217, 188, 586, 312, 204, 194, 252, 585, 245, 197,
- 245, 502, 199, 312, 355, 202, 312, 289, 205, 210,
- 385, 215, 312, 381, 207, 384, 290, 291, 208, 211,
- 383, 216, 209, 389, 245, 312, 292, 210, 245, 386,
- 312, 320, 211, 195, 248, 219, 245, 198, 293, 294,
- 200, 320, 390, 203, 320, 285, 206, 295, 248, 387,
- 320, 392, 212, 584, 396, 583, 213, 248, 245, 248,
- 214, 425, 355, 320, 404, 215, 391, 574, 320, 429,
- 216, 220, 512, 573, 572, 221, 388, 404, 222, 351,
- 393, 223, 353, 248, 224, 512, 225, 248, 434, 437,
-
- 226, 380, 571, 570, 227, 248, 515, 382, 569, 245,
- 245, 568, 447, 228, 286, 245, 405, 567, 229, 515,
- 230, 231, 232, 397, 395, 245, 233, 248, 396, 234,
- 427, 245, 235, 398, 425, 236, 237, 238, 430, 470,
- 429, 239, 399, 400, 566, 240, 245, 434, 352, 563,
- 445, 354, 401, 437, 241, 562, 442, 435, 438, 242,
- 381, 243, 244, 253, 402, 403, 383, 254, 248, 248,
- 255, 448, 446, 256, 248, 245, 257, 559, 258, 245,
- 443, 245, 259, 447, 248, 558, 260, 397, 516, 444,
- 248, 245, 470, 427, 245, 261, 449, 245, 471, 430,
-
- 262, 516, 245, 263, 264, 248, 435, 510, 265, 521,
- 542, 266, 438, 483, 267, 484, 245, 268, 541, 269,
- 525, 245, 521, 270, 510, 540, 536, 271, 245, 480,
- 538, 481, 487, 525, 248, 245, 272, 245, 248, 536,
- 485, 273, 448, 538, 274, 327, 545, 482, 245, 328,
- 248, 471, 329, 248, 547, 330, 248, 549, 331, 245,
- 332, 248, 506, 557, 333, 560, 511, 545, 334, 505,
- 539, 547, 527, 526, 537, 248, 557, 335, 560, 535,
- 248, 534, 336, 511, 337, 339, 245, 248, 561, 340,
- 549, 543, 341, 544, 248, 342, 248, 579, 343, 344,
-
- 345, 561, 575, 533, 346, 546, 576, 248, 347, 581,
- 553, 554, 555, 548, 565, 575, 550, 348, 248, 576,
- 579, 577, 349, 578, 350, 359, 546, 530, 581, 360,
- 548, 564, 361, 556, 577, 362, 578, 524, 363, 523,
- 364, 522, 520, 519, 365, 248, 518, 517, 366, 550,
- 514, 513, 508, 507, 504, 503, 580, 367, 501, 500,
- 499, 498, 368, 370, 497, 496, 494, 371, 582, 493,
- 372, 492, 491, 373, 490, 489, 374, 488, 375, 580,
- 486, 479, 376, 478, 477, 476, 377, 582, 475, 474,
- 473, 472, 468, 467, 466, 378, 465, 464, 462, 459,
-
- 379, 10, 10, 10, 98, 98, 426, 426, 458, 455,
- 454, 453, 452, 451, 294, 293, 292, 291, 290, 289,
- 450, 386, 385, 441, 440, 273, 272, 271, 270, 439,
- 268, 267, 266, 265, 264, 262, 261, 260, 259, 436,
- 257, 256, 255, 254, 253, 433, 432, 243, 242, 241,
- 240, 239, 431, 237, 236, 235, 234, 233, 232, 230,
- 229, 228, 227, 226, 428, 224, 223, 222, 221, 220,
- 424, 422, 421, 420, 415, 414, 413, 412, 411, 410,
- 409, 408, 407, 406, 394, 369, 358, 357, 356, 355,
- 338, 326, 322, 314, 303, 306, 305, 304, 298, 175,
-
- 218, 191, 183, 201, 190, 165, 164, 150, 146, 139,
- 131, 127, 116, 88, 87, 86, 85, 84, 83, 82,
- 81, 80, 79, 78, 77, 76, 75, 74, 73, 72,
- 71, 70, 69, 68, 67, 66, 65, 64, 63, 62,
- 61, 60, 597, 9, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
-
- 597, 597, 597, 597, 597, 597, 597, 597
- } ;
-
-static yyconst flex_int16_t yy_chk[1009] =
- { 0,
- 0, 0, 98, 609, 3, 5, 608, 607, 84, 3,
- 3, 5, 3, 84, 45, 99, 100, 107, 3, 3,
- 110, 3, 5, 3, 112, 3, 6, 45, 3, 606,
- 3, 3, 6, 48, 3, 3, 62, 3, 5, 3,
- 3, 5, 3, 6, 3, 63, 48, 45, 3, 45,
- 139, 117, 3, 3, 117, 62, 3, 308, 3, 6,
- 3, 98, 6, 3, 119, 5, 48, 63, 48, 139,
- 107, 308, 119, 605, 99, 100, 107, 119, 112, 110,
- 604, 120, 307, 112, 120, 307, 6, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
-
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
- 7, 40, 40, 40, 40, 40, 40, 40, 40, 125,
- 245, 507, 603, 507, 602, 125, 509, 509, 40, 40,
- 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
- 40, 40, 40, 105, 40, 40, 40, 40, 40, 40,
- 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
-
- 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
- 40, 43, 43, 43, 111, 43, 43, 43, 43, 245,
- 47, 105, 43, 43, 601, 47, 50, 51, 600, 246,
- 43, 43, 43, 47, 43, 54, 43, 43, 43, 50,
- 51, 57, 105, 595, 56, 58, 43, 43, 54, 56,
- 59, 124, 97, 47, 57, 47, 104, 56, 58, 50,
- 51, 50, 51, 59, 316, 111, 594, 593, 54, 124,
- 54, 97, 85, 111, 57, 97, 57, 56, 58, 56,
- 58, 85, 85, 59, 316, 59, 60, 60, 246, 60,
- 66, 85, 247, 60, 104, 66, 60, 588, 104, 60,
-
- 413, 414, 60, 85, 85, 68, 410, 584, 60, 583,
- 68, 97, 60, 413, 414, 104, 60, 410, 109, 416,
- 249, 60, 69, 66, 60, 66, 60, 69, 60, 61,
- 72, 106, 416, 61, 108, 72, 61, 582, 68, 61,
- 68, 76, 61, 61, 580, 71, 76, 251, 61, 66,
- 71, 247, 61, 71, 78, 69, 61, 69, 485, 78,
- 109, 61, 79, 72, 275, 72, 61, 79, 61, 574,
- 423, 276, 106, 108, 76, 458, 76, 109, 71, 249,
- 71, 531, 106, 423, 531, 277, 81, 78, 458, 78,
- 106, 81, 573, 108, 81, 79, 83, 79, 467, 278,
-
- 76, 83, 572, 131, 71, 74, 251, 571, 279, 74,
- 283, 467, 74, 131, 485, 74, 131, 115, 74, 81,
- 278, 81, 131, 275, 74, 277, 115, 115, 74, 83,
- 276, 83, 74, 281, 280, 131, 115, 74, 282, 278,
- 131, 150, 74, 75, 277, 81, 284, 75, 115, 115,
- 75, 150, 281, 75, 150, 285, 75, 115, 278, 279,
- 150, 283, 75, 570, 288, 569, 75, 279, 287, 283,
- 75, 326, 281, 150, 296, 75, 282, 556, 150, 338,
- 75, 89, 488, 555, 554, 89, 280, 296, 89, 351,
- 284, 89, 353, 280, 89, 488, 89, 282, 358, 369,
-
- 89, 380, 553, 552, 89, 284, 491, 382, 551, 384,
- 391, 550, 393, 89, 285, 392, 296, 548, 89, 491,
- 89, 89, 94, 288, 287, 387, 94, 287, 396, 94,
- 326, 388, 94, 295, 425, 94, 94, 94, 338, 426,
- 429, 94, 295, 295, 546, 94, 395, 434, 351, 542,
- 391, 353, 295, 437, 94, 541, 384, 358, 369, 94,
- 380, 94, 94, 101, 295, 295, 382, 101, 384, 391,
- 101, 393, 392, 101, 392, 442, 101, 537, 101, 443,
- 387, 446, 101, 447, 387, 535, 101, 396, 492, 388,
- 388, 449, 470, 425, 444, 101, 395, 481, 426, 429,
-
- 101, 492, 445, 101, 103, 395, 434, 487, 103, 498,
- 524, 103, 437, 445, 103, 445, 482, 103, 523, 103,
- 503, 480, 498, 103, 510, 522, 517, 103, 506, 442,
- 519, 443, 449, 503, 442, 505, 103, 526, 443, 517,
- 446, 103, 447, 519, 103, 231, 528, 444, 527, 231,
- 449, 470, 231, 444, 529, 231, 481, 530, 231, 544,
- 231, 445, 482, 534, 231, 539, 487, 545, 231, 480,
- 520, 547, 506, 505, 518, 482, 534, 231, 539, 514,
- 480, 513, 231, 510, 231, 244, 543, 506, 540, 244,
- 549, 526, 244, 527, 505, 244, 526, 564, 244, 244,
-
- 244, 540, 558, 511, 244, 528, 559, 527, 244, 565,
- 532, 532, 532, 529, 544, 558, 530, 244, 544, 559,
- 579, 562, 244, 563, 244, 263, 545, 508, 581, 263,
- 547, 543, 263, 532, 562, 263, 563, 501, 263, 500,
- 263, 499, 497, 496, 263, 543, 494, 493, 263, 549,
- 490, 489, 484, 483, 471, 468, 564, 263, 466, 465,
- 464, 462, 263, 274, 461, 459, 457, 274, 565, 456,
- 274, 455, 454, 274, 453, 452, 274, 451, 274, 579,
- 448, 439, 274, 438, 436, 435, 274, 581, 431, 430,
- 428, 427, 421, 420, 419, 274, 418, 417, 415, 412,
-
- 274, 598, 598, 598, 599, 599, 610, 610, 411, 409,
- 408, 407, 406, 405, 403, 402, 401, 400, 399, 398,
- 397, 390, 389, 383, 381, 379, 378, 377, 376, 375,
- 374, 373, 372, 371, 370, 368, 367, 366, 365, 364,
- 363, 362, 361, 360, 359, 354, 352, 350, 349, 348,
- 347, 346, 345, 344, 343, 342, 341, 340, 339, 337,
- 336, 335, 334, 333, 332, 331, 330, 329, 328, 327,
- 322, 314, 310, 309, 306, 305, 304, 303, 302, 301,
- 300, 299, 298, 297, 286, 269, 258, 252, 250, 248,
- 238, 225, 152, 133, 126, 123, 122, 121, 118, 82,
-
- 80, 77, 73, 70, 67, 65, 64, 55, 53, 49,
- 46, 44, 41, 39, 38, 37, 36, 35, 34, 33,
- 32, 31, 30, 29, 28, 27, 26, 25, 24, 23,
- 22, 21, 20, 19, 18, 17, 16, 15, 14, 13,
- 12, 11, 9, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
- 597, 597, 597, 597, 597, 597, 597, 597, 597, 597,
-
- 597, 597, 597, 597, 597, 597, 597, 597
- } ;
-
-static yy_state_type yy_last_accepting_state;
-static char *yy_last_accepting_cpos;
-
-extern int librecode_yy_flex_debug;
-int librecode_yy_flex_debug = 0;
-
-/* The intent behind this definition is that it'll catch
- * any uses of REJECT which flex missed.
- */
-#define REJECT reject_used_but_not_detected
-#define yymore() yymore_used_but_not_detected
-#define YY_MORE_ADJ 0
-#define YY_RESTORE_YY_MORE_OFFSET
-char *librecode_yytext;
-/* This file is generated automatically by `mergelex.py'. */
-#include "common.h"
-static RECODE_CONST_REQUEST request;
-static RECODE_SUBTASK subtask;
-
-#define YY_INPUT(buf, result, max_size) { int c = get_byte (subtask); result = (c == EOF) ? YY_NULL : (buf[0] = c, 1); }
-
-
-void texte_latin1_diaeresis PARAMS ((void));
-
-
-#define INITIAL 0
-#define ascii_latin1 1
-#define latex_latin1 2
-#define texte_latin1 3
-
-#ifndef YY_NO_UNISTD_H
-/* Special case for "unistd.h", since it is non-ANSI. We include it way
- * down here because we want the user's section 1 to have been scanned first.
- * The user has a chance to override it with an option.
- */
-#include <unistd.h>
-#endif
-
-#ifndef YY_EXTRA_TYPE
-#define YY_EXTRA_TYPE void *
-#endif
-
-static int yy_init_globals (void );
-
-/* Accessor methods to globals.
- These are made visible to non-reentrant scanners for convenience. */
-
-int librecode_yylex_destroy (void );
-
-int librecode_yyget_debug (void );
-
-void librecode_yyset_debug (int debug_flag );
-
-YY_EXTRA_TYPE librecode_yyget_extra (void );
-
-void librecode_yyset_extra (YY_EXTRA_TYPE user_defined );
-
-FILE *librecode_yyget_in (void );
-
-void librecode_yyset_in (FILE * in_str );
-
-FILE *librecode_yyget_out (void );
-
-void librecode_yyset_out (FILE * out_str );
-
-int librecode_yyget_leng (void );
-
-char *librecode_yyget_text (void );
-
-int librecode_yyget_lineno (void );
-
-void librecode_yyset_lineno (int line_number );
-
-/* Macros after this point can all be overridden by user definitions in
- * section 1.
- */
-
-#ifndef YY_SKIP_YYWRAP
-#ifdef __cplusplus
-extern "C" int librecode_yywrap (void );
-#else
-extern int librecode_yywrap (void );
-#endif
-#endif
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char *,yyconst char *,int );
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * );
-#endif
-
-#ifndef YY_NO_INPUT
-
-#ifdef __cplusplus
-static int yyinput (void );
-#else
-static int input (void );
-#endif
-
-#endif
-
-/* Amount of stuff to slurp up with each read. */
-#ifndef YY_READ_BUF_SIZE
-#ifdef __ia64__
-/* On IA-64, the buffer size is 16k, not 8k */
-#define YY_READ_BUF_SIZE 16384
-#else
-#define YY_READ_BUF_SIZE 8192
-#endif /* __ia64__ */
-#endif
-
-/* Copy whatever the last rule matched to the standard output. */
-#ifndef ECHO
-/* This used to be an fputs(), but since the string might contain NUL's,
- * we now use fwrite().
- */
-#define ECHO do { if (fwrite( librecode_yytext, librecode_yyleng, 1, librecode_yyout )) {} } while (0)
-#endif
-
-/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
- * is returned in "result".
- */
-#ifndef YY_INPUT
-#define YY_INPUT(buf,result,max_size) \
- if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
- { \
- int c = '*'; \
- size_t n; \
- for ( n = 0; n < max_size && \
- (c = getc( librecode_yyin )) != EOF && c != '\n'; ++n ) \
- buf[n] = (char) c; \
- if ( c == '\n' ) \
- buf[n++] = (char) c; \
- if ( c == EOF && ferror( librecode_yyin ) ) \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- result = n; \
- } \
- else \
- { \
- errno=0; \
- while ( (result = fread(buf, 1, max_size, librecode_yyin))==0 && ferror(librecode_yyin)) \
- { \
- if( errno != EINTR) \
- { \
- YY_FATAL_ERROR( "input in flex scanner failed" ); \
- break; \
- } \
- errno=0; \
- clearerr(librecode_yyin); \
- } \
- }\
-\
-
-#endif
-
-/* No semi-colon after return; correct usage is to write "yyterminate();" -
- * we don't want an extra ';' after the "return" because that will cause
- * some compilers to complain about unreachable statements.
- */
-#ifndef yyterminate
-#define yyterminate() return YY_NULL
-#endif
-
-/* Number of entries by which start-condition stack grows. */
-#ifndef YY_START_STACK_INCR
-#define YY_START_STACK_INCR 25
-#endif
-
-/* Report a fatal error. */
-#ifndef YY_FATAL_ERROR
-#define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
-#endif
-
-/* end tables serialization structures and prototypes */
-
-/* Default declaration of generated scanner - a define so the user can
- * easily add parameters.
- */
-#ifndef YY_DECL
-#define YY_DECL_IS_OURS 1
-
-extern int librecode_yylex (void);
-
-#define YY_DECL int librecode_yylex (void)
-#endif /* !YY_DECL */
-
-/* Code executed at the beginning of each rule, after librecode_yytext and librecode_yyleng
- * have been set up.
- */
-#ifndef YY_USER_ACTION
-#define YY_USER_ACTION
-#endif
-
-/* Code executed at the end of each rule. */
-#ifndef YY_BREAK
-#define YY_BREAK break;
-#endif
-
-#define YY_RULE_SETUP \
- YY_USER_ACTION
-
-/** The main scanner function which does all the work.
- */
-YY_DECL
-{
- register yy_state_type yy_current_state;
- register char *yy_cp, *yy_bp;
- register int yy_act;
-
-
-
- if ( !(yy_init) )
- {
- (yy_init) = 1;
-
-#ifdef YY_USER_INIT
- YY_USER_INIT;
-#endif
-
- if ( ! (yy_start) )
- (yy_start) = 1; /* first start state */
-
- if ( ! librecode_yyin )
- librecode_yyin = stdin;
-
- if ( ! librecode_yyout )
- librecode_yyout = stdout;
-
- if ( ! YY_CURRENT_BUFFER ) {
- librecode_yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- librecode_yy_create_buffer(librecode_yyin,YY_BUF_SIZE );
- }
-
- librecode_yy_load_buffer_state( );
- }
-
- while ( 1 ) /* loops until end-of-file is reached */
- {
- yy_cp = (yy_c_buf_p);
-
- /* Support of librecode_yytext. */
- *yy_cp = (yy_hold_char);
-
- /* yy_bp points to the position in yy_ch_buf of the start of
- * the current run.
- */
- yy_bp = yy_cp;
-
- yy_current_state = (yy_start);
-yy_match:
- do
- {
- register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 598 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- ++yy_cp;
- }
- while ( yy_base[yy_current_state] != 944 );
-
-yy_find_action:
- yy_act = yy_accept[yy_current_state];
- if ( yy_act == 0 )
- { /* have to back up */
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- yy_act = yy_accept[yy_current_state];
- }
-
- YY_DO_BEFORE_ACTION;
-
-do_action: /* This label is used only to access EOF actions. */
-
- switch ( yy_act )
- { /* beginning of action switch */
- case 0: /* must back up */
- /* undo the effects of YY_DO_BEFORE_ACTION */
- *yy_cp = (yy_hold_char);
- yy_cp = (yy_last_accepting_cpos);
- yy_current_state = (yy_last_accepting_state);
- goto yy_find_action;
-
-case YY_STATE_EOF(INITIAL):
-case YY_STATE_EOF(ascii_latin1):
-case YY_STATE_EOF(latex_latin1):
-case YY_STATE_EOF(texte_latin1):
-{ return 1; }
- YY_BREAK
-
-case 1:
-YY_RULE_SETUP
-{ put_byte (171, subtask); }
- YY_BREAK
-case 2:
-YY_RULE_SETUP
-{ put_byte (187, subtask); }
- YY_BREAK
-case 3:
-YY_RULE_SETUP
-{ put_byte (192, subtask); }
- YY_BREAK
-case 4:
-YY_RULE_SETUP
-{ put_byte (193, subtask); }
- YY_BREAK
-case 5:
-YY_RULE_SETUP
-{ put_byte (194, subtask); }
- YY_BREAK
-case 6:
-YY_RULE_SETUP
-{ put_byte (195, subtask); }
- YY_BREAK
-case 7:
-YY_RULE_SETUP
-{ put_byte (196, subtask); }
- YY_BREAK
-case 8:
-YY_RULE_SETUP
-{ put_byte (199, subtask); }
- YY_BREAK
-case 9:
-YY_RULE_SETUP
-{ put_byte (200, subtask); }
- YY_BREAK
-case 10:
-YY_RULE_SETUP
-{ put_byte (201, subtask); }
- YY_BREAK
-case 11:
-YY_RULE_SETUP
-{ put_byte (202, subtask); }
- YY_BREAK
-case 12:
-YY_RULE_SETUP
-{ put_byte (203, subtask); }
- YY_BREAK
-case 13:
-YY_RULE_SETUP
-{ put_byte (204, subtask); }
- YY_BREAK
-case 14:
-YY_RULE_SETUP
-{ put_byte (205, subtask); }
- YY_BREAK
-case 15:
-YY_RULE_SETUP
-{ put_byte (206, subtask); }
- YY_BREAK
-case 16:
-YY_RULE_SETUP
-{ put_byte (207, subtask); }
- YY_BREAK
-case 17:
-YY_RULE_SETUP
-{ put_byte (209, subtask); }
- YY_BREAK
-case 18:
-YY_RULE_SETUP
-{ put_byte (210, subtask); }
- YY_BREAK
-case 19:
-YY_RULE_SETUP
-{ put_byte (211, subtask); }
- YY_BREAK
-case 20:
-YY_RULE_SETUP
-{ put_byte (212, subtask); }
- YY_BREAK
-case 21:
-YY_RULE_SETUP
-{ put_byte (213, subtask); }
- YY_BREAK
-case 22:
-YY_RULE_SETUP
-{ put_byte (214, subtask); }
- YY_BREAK
-case 23:
-YY_RULE_SETUP
-{ put_byte (216, subtask); }
- YY_BREAK
-case 24:
-YY_RULE_SETUP
-{ put_byte (217, subtask); }
- YY_BREAK
-case 25:
-YY_RULE_SETUP
-{ put_byte (218, subtask); }
- YY_BREAK
-case 26:
-YY_RULE_SETUP
-{ put_byte (219, subtask); }
- YY_BREAK
-case 27:
-YY_RULE_SETUP
-{ put_byte (220, subtask); }
- YY_BREAK
-case 28:
-YY_RULE_SETUP
-{ put_byte (221, subtask); }
- YY_BREAK
-case 29:
-YY_RULE_SETUP
-{ put_byte (223, subtask); }
- YY_BREAK
-case 30:
-YY_RULE_SETUP
-{ put_byte (224, subtask); }
- YY_BREAK
-case 31:
-YY_RULE_SETUP
-{ put_byte (225, subtask); }
- YY_BREAK
-case 32:
-YY_RULE_SETUP
-{ put_byte (226, subtask); }
- YY_BREAK
-case 33:
-YY_RULE_SETUP
-{ put_byte (227, subtask); }
- YY_BREAK
-case 34:
-YY_RULE_SETUP
-{ put_byte (228, subtask); }
- YY_BREAK
-case 35:
-YY_RULE_SETUP
-{ put_byte (231, subtask); }
- YY_BREAK
-case 36:
-YY_RULE_SETUP
-{ put_byte (232, subtask); }
- YY_BREAK
-case 37:
-YY_RULE_SETUP
-{ put_byte (233, subtask); }
- YY_BREAK
-case 38:
-YY_RULE_SETUP
-{ put_byte (234, subtask); }
- YY_BREAK
-case 39:
-YY_RULE_SETUP
-{ put_byte (235, subtask); }
- YY_BREAK
-case 40:
-YY_RULE_SETUP
-{ put_byte (236, subtask); }
- YY_BREAK
-case 41:
-YY_RULE_SETUP
-{ put_byte (237, subtask); }
- YY_BREAK
-case 42:
-YY_RULE_SETUP
-{ put_byte (238, subtask); }
- YY_BREAK
-case 43:
-YY_RULE_SETUP
-{ put_byte (239, subtask); }
- YY_BREAK
-case 44:
-YY_RULE_SETUP
-{ put_byte (241, subtask); }
- YY_BREAK
-case 45:
-YY_RULE_SETUP
-{ put_byte (242, subtask); }
- YY_BREAK
-case 46:
-YY_RULE_SETUP
-{ put_byte (243, subtask); }
- YY_BREAK
-case 47:
-YY_RULE_SETUP
-{ put_byte (244, subtask); }
- YY_BREAK
-case 48:
-YY_RULE_SETUP
-{ put_byte (245, subtask); }
- YY_BREAK
-case 49:
-YY_RULE_SETUP
-{ put_byte (246, subtask); }
- YY_BREAK
-case 50:
-YY_RULE_SETUP
-{ put_byte (248, subtask); }
- YY_BREAK
-case 51:
-YY_RULE_SETUP
-{ put_byte (249, subtask); }
- YY_BREAK
-case 52:
-YY_RULE_SETUP
-{ put_byte (250, subtask); }
- YY_BREAK
-case 53:
-YY_RULE_SETUP
-{ put_byte (251, subtask); }
- YY_BREAK
-case 54:
-YY_RULE_SETUP
-{ put_byte (252, subtask); }
- YY_BREAK
-case 55:
-YY_RULE_SETUP
-{ put_byte (253, subtask); }
- YY_BREAK
-case 56:
-YY_RULE_SETUP
-{ put_byte (255, subtask); }
- YY_BREAK
-
-
-case 57:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('#', subtask); }
- YY_BREAK
-case 58:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('$', subtask); }
- YY_BREAK
-case 59:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('%', subtask); }
- YY_BREAK
-case 60:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('&', subtask); }
- YY_BREAK
-case 61:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('_', subtask); }
- YY_BREAK
-case 62:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('{', subtask); }
- YY_BREAK
-case 63:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('}', subtask); }
- YY_BREAK
-case 64:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE ('\\', subtask); }
- YY_BREAK
-case 65:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (160, subtask); }
- YY_BREAK
-case 66:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (161, subtask); }
- YY_BREAK
-case 67:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (163, subtask); }
- YY_BREAK
-case 68:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (167, subtask); }
- YY_BREAK
-case 69:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (168, subtask); }
- YY_BREAK
-case 70:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (169, subtask); }
- YY_BREAK
-case 71:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (171, subtask); }
- YY_BREAK
-case 72:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (172, subtask); }
- YY_BREAK
-case 73:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (173, subtask); }
- YY_BREAK
-case 74:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (176, subtask); }
- YY_BREAK
-case 75:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (177, subtask); }
- YY_BREAK
-case 76:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (178, subtask); }
- YY_BREAK
-case 77:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (179, subtask); }
- YY_BREAK
-case 78:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (180, subtask); }
- YY_BREAK
-case 79:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (181, subtask); }
- YY_BREAK
-case 80:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (183, subtask); }
- YY_BREAK
-case 81:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (184, subtask); }
- YY_BREAK
-case 82:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (185, subtask); }
- YY_BREAK
-case 83:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (187, subtask); }
- YY_BREAK
-case 84:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (188, subtask); }
- YY_BREAK
-case 85:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (189, subtask); }
- YY_BREAK
-case 86:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (190, subtask); }
- YY_BREAK
-case 87:
-YY_RULE_SETUP
-{ PUT_NON_DIACRITIC_BYTE (191, subtask); }
- YY_BREAK
-case 88:
-YY_RULE_SETUP
-{ put_byte (192, subtask); }
- YY_BREAK
-case 89:
-YY_RULE_SETUP
-{ put_byte (193, subtask); }
- YY_BREAK
-case 90:
-YY_RULE_SETUP
-{ put_byte (194, subtask); }
- YY_BREAK
-case 91:
-YY_RULE_SETUP
-{ put_byte (195, subtask); }
- YY_BREAK
-case 92:
-YY_RULE_SETUP
-{ put_byte (196, subtask); }
- YY_BREAK
-case 93:
-YY_RULE_SETUP
-{ put_byte (197, subtask); }
- YY_BREAK
-case 94:
-YY_RULE_SETUP
-{ put_byte (198, subtask); }
- YY_BREAK
-case 95:
-YY_RULE_SETUP
-{ put_byte (199, subtask); }
- YY_BREAK
-case 96:
-YY_RULE_SETUP
-{ put_byte (200, subtask); }
- YY_BREAK
-case 97:
-YY_RULE_SETUP
-{ put_byte (201, subtask); }
- YY_BREAK
-case 98:
-YY_RULE_SETUP
-{ put_byte (202, subtask); }
- YY_BREAK
-case 99:
-YY_RULE_SETUP
-{ put_byte (203, subtask); }
- YY_BREAK
-case 100:
-YY_RULE_SETUP
-{ put_byte (204, subtask); }
- YY_BREAK
-case 101:
-YY_RULE_SETUP
-{ put_byte (205, subtask); }
- YY_BREAK
-case 102:
-YY_RULE_SETUP
-{ put_byte (206, subtask); }
- YY_BREAK
-case 103:
-YY_RULE_SETUP
-{ put_byte (207, subtask); }
- YY_BREAK
-case 104:
-YY_RULE_SETUP
-{ put_byte (209, subtask); }
- YY_BREAK
-case 105:
-YY_RULE_SETUP
-{ put_byte (210, subtask); }
- YY_BREAK
-case 106:
-YY_RULE_SETUP
-{ put_byte (211, subtask); }
- YY_BREAK
-case 107:
-YY_RULE_SETUP
-{ put_byte (212, subtask); }
- YY_BREAK
-case 108:
-YY_RULE_SETUP
-{ put_byte (213, subtask); }
- YY_BREAK
-case 109:
-YY_RULE_SETUP
-{ put_byte (214, subtask); }
- YY_BREAK
-case 110:
-YY_RULE_SETUP
-{ put_byte (216, subtask); }
- YY_BREAK
-case 111:
-YY_RULE_SETUP
-{ put_byte (217, subtask); }
- YY_BREAK
-case 112:
-YY_RULE_SETUP
-{ put_byte (218, subtask); }
- YY_BREAK
-case 113:
-YY_RULE_SETUP
-{ put_byte (219, subtask); }
- YY_BREAK
-case 114:
-YY_RULE_SETUP
-{ put_byte (220, subtask); }
- YY_BREAK
-case 115:
-YY_RULE_SETUP
-{ put_byte (221, subtask); }
- YY_BREAK
-case 116:
-YY_RULE_SETUP
-{ put_byte (223, subtask); }
- YY_BREAK
-case 117:
-YY_RULE_SETUP
-{ put_byte (224, subtask); }
- YY_BREAK
-case 118:
-YY_RULE_SETUP
-{ put_byte (225, subtask); }
- YY_BREAK
-case 119:
-YY_RULE_SETUP
-{ put_byte (226, subtask); }
- YY_BREAK
-case 120:
-YY_RULE_SETUP
-{ put_byte (227, subtask); }
- YY_BREAK
-case 121:
-YY_RULE_SETUP
-{ put_byte (228, subtask); }
- YY_BREAK
-case 122:
-YY_RULE_SETUP
-{ put_byte (229, subtask); }
- YY_BREAK
-case 123:
-YY_RULE_SETUP
-{ put_byte (230, subtask); }
- YY_BREAK
-case 124:
-YY_RULE_SETUP
-{ put_byte (231, subtask); }
- YY_BREAK
-case 125:
-YY_RULE_SETUP
-{ put_byte (232, subtask); }
- YY_BREAK
-case 126:
-YY_RULE_SETUP
-{ put_byte (233, subtask); }
- YY_BREAK
-case 127:
-YY_RULE_SETUP
-{ put_byte (234, subtask); }
- YY_BREAK
-case 128:
-YY_RULE_SETUP
-{ put_byte (235, subtask); }
- YY_BREAK
-case 129:
-YY_RULE_SETUP
-{ put_byte (236, subtask); }
- YY_BREAK
-case 130:
-YY_RULE_SETUP
-{ put_byte (237, subtask); }
- YY_BREAK
-case 131:
-YY_RULE_SETUP
-{ put_byte (238, subtask); }
- YY_BREAK
-case 132:
-YY_RULE_SETUP
-{ put_byte (239, subtask); }
- YY_BREAK
-case 133:
-YY_RULE_SETUP
-{ put_byte (241, subtask); }
- YY_BREAK
-case 134:
-YY_RULE_SETUP
-{ put_byte (242, subtask); }
- YY_BREAK
-case 135:
-YY_RULE_SETUP
-{ put_byte (243, subtask); }
- YY_BREAK
-case 136:
-YY_RULE_SETUP
-{ put_byte (244, subtask); }
- YY_BREAK
-case 137:
-YY_RULE_SETUP
-{ put_byte (245, subtask); }
- YY_BREAK
-case 138:
-YY_RULE_SETUP
-{ put_byte (246, subtask); }
- YY_BREAK
-case 139:
-YY_RULE_SETUP
-{ put_byte (248, subtask); }
- YY_BREAK
-case 140:
-YY_RULE_SETUP
-{ put_byte (249, subtask); }
- YY_BREAK
-case 141:
-YY_RULE_SETUP
-{ put_byte (250, subtask); }
- YY_BREAK
-case 142:
-YY_RULE_SETUP
-{ put_byte (251, subtask); }
- YY_BREAK
-case 143:
-YY_RULE_SETUP
-{ put_byte (252, subtask); }
- YY_BREAK
-case 144:
-YY_RULE_SETUP
-{ put_byte (253, subtask); }
- YY_BREAK
-case 145:
-YY_RULE_SETUP
-{ put_byte (255, subtask); }
- YY_BREAK
-case 146:
-YY_RULE_SETUP
-{ ECHO; }
- YY_BREAK
-case 147:
-YY_RULE_SETUP
-{ ECHO; }
- YY_BREAK
-
-
-case 148:
-YY_RULE_SETUP
-{ put_byte (171, subtask); }
- YY_BREAK
-case 149:
-YY_RULE_SETUP
-{ put_byte (187, subtask); }
- YY_BREAK
-case 150:
-YY_RULE_SETUP
-{ put_byte (192, subtask); }
- YY_BREAK
-case 151:
-YY_RULE_SETUP
-{ put_byte (194, subtask); }
- YY_BREAK
-case 152:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (196, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 153:
-YY_RULE_SETUP
-{ put_byte (224, subtask); }
- YY_BREAK
-case 154:
-YY_RULE_SETUP
-{ put_byte (226, subtask); }
- YY_BREAK
-case 155:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (228, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 156:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ put_byte (199, subtask); }
- YY_BREAK
-case 157:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ put_byte (231, subtask); }
- YY_BREAK
-case 158:
-YY_RULE_SETUP
-{ put_byte (200, subtask); }
- YY_BREAK
-case 159:
-YY_RULE_SETUP
-{ put_byte (201, subtask); put_byte (187, subtask); }
- YY_BREAK
-case 160:
-YY_RULE_SETUP
-{ put_byte ('E', subtask); put_byte (187, subtask); }
- YY_BREAK
-case 161:
-YY_RULE_SETUP
-{ put_byte (201, subtask); }
- YY_BREAK
-case 162:
-YY_RULE_SETUP
-{ put_byte (202, subtask); }
- YY_BREAK
-case 163:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (203, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 164:
-YY_RULE_SETUP
-{ put_byte (232, subtask); }
- YY_BREAK
-case 165:
-YY_RULE_SETUP
-{ put_byte (233, subtask); put_byte (187, subtask); }
- YY_BREAK
-case 166:
-YY_RULE_SETUP
-{ put_byte ('e', subtask); put_byte (187, subtask); }
- YY_BREAK
-case 167:
-YY_RULE_SETUP
-{ put_byte (233, subtask); }
- YY_BREAK
-case 168:
-YY_RULE_SETUP
-{ put_byte (234, subtask); }
- YY_BREAK
-case 169:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (235, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 170:
-YY_RULE_SETUP
-{ put_byte (204, subtask); }
- YY_BREAK
-case 171:
-YY_RULE_SETUP
-{ put_byte (206, subtask); }
- YY_BREAK
-case 172:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (207, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 173:
-YY_RULE_SETUP
-{ put_byte (236, subtask); }
- YY_BREAK
-case 174:
-YY_RULE_SETUP
-{ put_byte (238, subtask); }
- YY_BREAK
-case 175:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (239, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 176:
-YY_RULE_SETUP
-{ put_byte (210, subtask); }
- YY_BREAK
-case 177:
-YY_RULE_SETUP
-{ put_byte (212, subtask); }
- YY_BREAK
-case 178:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (214, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 179:
-YY_RULE_SETUP
-{ put_byte (242, subtask); }
- YY_BREAK
-case 180:
-YY_RULE_SETUP
-{ put_byte (244, subtask); }
- YY_BREAK
-case 181:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (246, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 182:
-YY_RULE_SETUP
-{ put_byte (217, subtask); }
- YY_BREAK
-case 183:
-YY_RULE_SETUP
-{ put_byte (219, subtask); }
- YY_BREAK
-case 184:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (220, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 185:
-YY_RULE_SETUP
-{ put_byte (249, subtask); }
- YY_BREAK
-case 186:
-YY_RULE_SETUP
-{ put_byte (251, subtask); }
- YY_BREAK
-case 187:
-*yy_cp = (yy_hold_char); /* undo effects of setting up librecode_yytext */
-(yy_c_buf_p) = yy_cp = yy_bp + 2;
-YY_DO_BEFORE_ACTION; /* set up librecode_yytext again */
-YY_RULE_SETUP
-{ if (librecode_yytext[1] == request->diaeresis_char)
- put_byte (252, subtask);
- else
- ECHO;
- }
- YY_BREAK
-case 188:
-/* rule 188 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 189:
-/* rule 189 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 190:
-/* rule 190 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 191:
-/* rule 191 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 192:
-/* rule 192 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 193:
-/* rule 193 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 194:
-/* rule 194 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 195:
-/* rule 195 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 196:
-/* rule 196 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 197:
-/* rule 197 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 198:
-/* rule 198 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 199:
-/* rule 199 can match eol */
-YY_RULE_SETUP
-{ if (librecode_yytext[4] == request->diaeresis_char)
- texte_latin1_diaeresis ();
- else
- ECHO;
- }
- YY_BREAK
-case 200:
-/* rule 200 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 201:
-YY_RULE_SETUP
-{ ECHO; }
- YY_BREAK
-case 202:
-/* rule 202 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 203:
-/* rule 203 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 204:
-/* rule 204 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 205:
-/* rule 205 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 206:
-/* rule 206 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-case 207:
-/* rule 207 can match eol */
-YY_RULE_SETUP
-{ texte_latin1_diaeresis (); }
- YY_BREAK
-
-case 208:
-YY_RULE_SETUP
-ECHO;
- YY_BREAK
-
- case YY_END_OF_BUFFER:
- {
- /* Amount of text matched not including the EOB char. */
- int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
-
- /* Undo the effects of YY_DO_BEFORE_ACTION. */
- *yy_cp = (yy_hold_char);
- YY_RESTORE_YY_MORE_OFFSET
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
- {
- /* We're scanning a new file or input source. It's
- * possible that this happened because the user
- * just pointed librecode_yyin at a new source and called
- * librecode_yylex(). If so, then we have to assure
- * consistency between YY_CURRENT_BUFFER and our
- * globals. Here is the right place to do so, because
- * this is the first action (other than possibly a
- * back-up) that will match for the new input source.
- */
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- YY_CURRENT_BUFFER_LVALUE->yy_input_file = librecode_yyin;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
- }
-
- /* Note that here we test for yy_c_buf_p "<=" to the position
- * of the first EOB in the buffer, since yy_c_buf_p will
- * already have been incremented past the NUL character
- * (since all states make transitions on EOB to the
- * end-of-buffer state). Contrast this with the test
- * in input().
- */
- if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- { /* This was really a NUL. */
- yy_state_type yy_next_state;
-
- (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- /* Okay, we're now positioned to make the NUL
- * transition. We couldn't have
- * yy_get_previous_state() go ahead and do it
- * for us because it doesn't know how to deal
- * with the possibility of jamming (and we don't
- * want to build jamming into it because then it
- * will run more slowly).
- */
-
- yy_next_state = yy_try_NUL_trans( yy_current_state );
-
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
-
- if ( yy_next_state )
- {
- /* Consume the NUL. */
- yy_cp = ++(yy_c_buf_p);
- yy_current_state = yy_next_state;
- goto yy_match;
- }
-
- else
- {
- yy_cp = (yy_c_buf_p);
- goto yy_find_action;
- }
- }
-
- else switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_END_OF_FILE:
- {
- (yy_did_buffer_switch_on_eof) = 0;
-
- if ( librecode_yywrap( ) )
- {
- /* Note: because we've taken care in
- * yy_get_next_buffer() to have set up
- * librecode_yytext, we can now set up
- * yy_c_buf_p so that if some total
- * hoser (like flex itself) wants to
- * call the scanner after we return the
- * YY_NULL, it'll still work - another
- * YY_NULL will get returned.
- */
- (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
-
- yy_act = YY_STATE_EOF(YY_START);
- goto do_action;
- }
-
- else
- {
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
- }
- break;
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) =
- (yytext_ptr) + yy_amount_of_matched_text;
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_match;
-
- case EOB_ACT_LAST_MATCH:
- (yy_c_buf_p) =
- &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
-
- yy_current_state = yy_get_previous_state( );
-
- yy_cp = (yy_c_buf_p);
- yy_bp = (yytext_ptr) + YY_MORE_ADJ;
- goto yy_find_action;
- }
- break;
- }
-
- default:
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--no action found" );
- } /* end of action switch */
- } /* end of scanning one token */
-} /* end of librecode_yylex */
-
-/* yy_get_next_buffer - try to read in a new buffer
- *
- * Returns a code representing an action:
- * EOB_ACT_LAST_MATCH -
- * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
- * EOB_ACT_END_OF_FILE - end of file
- */
-static int yy_get_next_buffer (void)
-{
- register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
- register char *source = (yytext_ptr);
- register int number_to_move, i;
- int ret_val;
-
- if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
- YY_FATAL_ERROR(
- "fatal flex scanner internal error--end of buffer missed" );
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
- { /* Don't try to fill the buffer, so this is an EOF. */
- if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
- {
- /* We matched a single character, the EOB, so
- * treat this as a final EOF.
- */
- return EOB_ACT_END_OF_FILE;
- }
-
- else
- {
- /* We matched some text prior to the EOB, first
- * process it.
- */
- return EOB_ACT_LAST_MATCH;
- }
- }
-
- /* Try to read more data. */
-
- /* First move last chars to start of buffer. */
- number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
-
- for ( i = 0; i < number_to_move; ++i )
- *(dest++) = *(source++);
-
- if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
- /* don't do the read, it's not guaranteed to return an EOF,
- * just force an EOF
- */
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
-
- else
- {
- int num_to_read =
- YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
-
- while ( num_to_read <= 0 )
- { /* Not enough room in the buffer - grow it. */
-
- /* just a shorter name for the current buffer */
- YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
-
- int yy_c_buf_p_offset =
- (int) ((yy_c_buf_p) - b->yy_ch_buf);
-
- if ( b->yy_is_our_buffer )
- {
- int new_size = b->yy_buf_size * 2;
-
- if ( new_size <= 0 )
- b->yy_buf_size += b->yy_buf_size / 8;
- else
- b->yy_buf_size *= 2;
-
- b->yy_ch_buf = (char *)
- /* Include room in for 2 EOB chars. */
- librecode_yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
- }
- else
- /* Can't grow it, we don't own it. */
- b->yy_ch_buf = 0;
-
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR(
- "fatal error - scanner input buffer overflow" );
-
- (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
-
- num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
- number_to_move - 1;
-
- }
-
- if ( num_to_read > YY_READ_BUF_SIZE )
- num_to_read = YY_READ_BUF_SIZE;
-
- /* Read in more data. */
- YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
- (yy_n_chars), (size_t) num_to_read );
-
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- if ( (yy_n_chars) == 0 )
- {
- if ( number_to_move == YY_MORE_ADJ )
- {
- ret_val = EOB_ACT_END_OF_FILE;
- librecode_yyrestart(librecode_yyin );
- }
-
- else
- {
- ret_val = EOB_ACT_LAST_MATCH;
- YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
- YY_BUFFER_EOF_PENDING;
- }
- }
-
- else
- ret_val = EOB_ACT_CONTINUE_SCAN;
-
- if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
- /* Extend the array by 50%, plus the number we really need. */
- yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1);
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) librecode_yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size );
- if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
- }
-
- (yy_n_chars) += number_to_move;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
- YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
-
- (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
-
- return ret_val;
-}
-
-/* yy_get_previous_state - get the state just before the EOB char was reached */
-
- static yy_state_type yy_get_previous_state (void)
-{
- register yy_state_type yy_current_state;
- register char *yy_cp;
-
- yy_current_state = (yy_start);
-
- for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
- {
- register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 598 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- }
-
- return yy_current_state;
-}
-
-/* yy_try_NUL_trans - try to make a transition on the NUL character
- *
- * synopsis
- * next_state = yy_try_NUL_trans( current_state );
- */
- static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
-{
- register int yy_is_jam;
- register char *yy_cp = (yy_c_buf_p);
-
- register YY_CHAR yy_c = 1;
- if ( yy_accept[yy_current_state] )
- {
- (yy_last_accepting_state) = yy_current_state;
- (yy_last_accepting_cpos) = yy_cp;
- }
- while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
- {
- yy_current_state = (int) yy_def[yy_current_state];
- if ( yy_current_state >= 598 )
- yy_c = yy_meta[(unsigned int) yy_c];
- }
- yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
- yy_is_jam = (yy_current_state == 597);
-
- return yy_is_jam ? 0 : yy_current_state;
-}
-
-#ifndef YY_NO_INPUT
-#ifdef __cplusplus
- static int yyinput (void)
-#else
- static int input (void)
-#endif
-
-{
- int c;
-
- *(yy_c_buf_p) = (yy_hold_char);
-
- if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
- {
- /* yy_c_buf_p now points to the character we want to return.
- * If this occurs *before* the EOB characters, then it's a
- * valid NUL; if not, then we've hit the end of the buffer.
- */
- if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
- /* This was really a NUL. */
- *(yy_c_buf_p) = '\0';
-
- else
- { /* need more input */
- int offset = (yy_c_buf_p) - (yytext_ptr);
- ++(yy_c_buf_p);
-
- switch ( yy_get_next_buffer( ) )
- {
- case EOB_ACT_LAST_MATCH:
- /* This happens because yy_g_n_b()
- * sees that we've accumulated a
- * token and flags that we need to
- * try matching the token before
- * proceeding. But for input(),
- * there's no matching to consider.
- * So convert the EOB_ACT_LAST_MATCH
- * to EOB_ACT_END_OF_FILE.
- */
-
- /* Reset buffer status. */
- librecode_yyrestart(librecode_yyin );
-
- /*FALLTHROUGH*/
-
- case EOB_ACT_END_OF_FILE:
- {
- if ( librecode_yywrap( ) )
- return EOF;
-
- if ( ! (yy_did_buffer_switch_on_eof) )
- YY_NEW_FILE;
-#ifdef __cplusplus
- return yyinput();
-#else
- return input();
-#endif
- }
-
- case EOB_ACT_CONTINUE_SCAN:
- (yy_c_buf_p) = (yytext_ptr) + offset;
- break;
- }
- }
- }
-
- c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
- *(yy_c_buf_p) = '\0'; /* preserve librecode_yytext */
- (yy_hold_char) = *++(yy_c_buf_p);
-
- return c;
-}
-#endif /* ifndef YY_NO_INPUT */
-
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- *
- * @note This function does not reset the start condition to @c INITIAL .
- */
- void librecode_yyrestart (FILE * input_file )
-{
-
- if ( ! YY_CURRENT_BUFFER ){
- librecode_yyensure_buffer_stack ();
- YY_CURRENT_BUFFER_LVALUE =
- librecode_yy_create_buffer(librecode_yyin,YY_BUF_SIZE );
- }
-
- librecode_yy_init_buffer(YY_CURRENT_BUFFER,input_file );
- librecode_yy_load_buffer_state( );
-}
-
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- *
- */
- void librecode_yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
-{
-
- /* TODO. We should be able to replace this entire function body
- * with
- * librecode_yypop_buffer_state();
- * librecode_yypush_buffer_state(new_buffer);
- */
- librecode_yyensure_buffer_stack ();
- if ( YY_CURRENT_BUFFER == new_buffer )
- return;
-
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
- librecode_yy_load_buffer_state( );
-
- /* We don't actually know whether we did this switch during
- * EOF (librecode_yywrap()) processing, but the only time this flag
- * is looked at is after librecode_yywrap() is called, so it's safe
- * to go ahead and always set it.
- */
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-static void librecode_yy_load_buffer_state (void)
-{
- (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
- (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
- librecode_yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
- (yy_hold_char) = *(yy_c_buf_p);
-}
-
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- *
- * @return the allocated buffer state.
- */
- YY_BUFFER_STATE librecode_yy_create_buffer (FILE * file, int size )
-{
- YY_BUFFER_STATE b;
-
- b = (YY_BUFFER_STATE) librecode_yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in librecode_yy_create_buffer()" );
-
- b->yy_buf_size = size;
-
- /* yy_ch_buf has to be 2 characters longer than the size given because
- * we need to put in 2 end-of-buffer characters.
- */
- b->yy_ch_buf = (char *) librecode_yyalloc(b->yy_buf_size + 2 );
- if ( ! b->yy_ch_buf )
- YY_FATAL_ERROR( "out of dynamic memory in librecode_yy_create_buffer()" );
-
- b->yy_is_our_buffer = 1;
-
- librecode_yy_init_buffer(b,file );
-
- return b;
-}
-
-/** Destroy the buffer.
- * @param b a buffer created with librecode_yy_create_buffer()
- *
- */
- void librecode_yy_delete_buffer (YY_BUFFER_STATE b )
-{
-
- if ( ! b )
- return;
-
- if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
- YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
-
- if ( b->yy_is_our_buffer )
- librecode_yyfree((void *) b->yy_ch_buf );
-
- librecode_yyfree((void *) b );
-}
-
-#ifndef __cplusplus
-extern int isatty (int );
-#endif /* __cplusplus */
-
-/* Initializes or reinitializes a buffer.
- * This function is sometimes called more than once on the same buffer,
- * such as during a librecode_yyrestart() or at EOF.
- */
- static void librecode_yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
-
-{
- int oerrno = errno;
-
- librecode_yy_flush_buffer(b );
-
- b->yy_input_file = file;
- b->yy_fill_buffer = 1;
-
- /* If b is the current buffer, then librecode_yy_init_buffer was _probably_
- * called from librecode_yyrestart() or through yy_get_next_buffer.
- * In that case, we don't want to reset the lineno or column.
- */
- if (b != YY_CURRENT_BUFFER){
- b->yy_bs_lineno = 1;
- b->yy_bs_column = 0;
- }
-
- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
-
- errno = oerrno;
-}
-
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- *
- */
- void librecode_yy_flush_buffer (YY_BUFFER_STATE b )
-{
- if ( ! b )
- return;
-
- b->yy_n_chars = 0;
-
- /* We always need two end-of-buffer characters. The first causes
- * a transition to the end-of-buffer state. The second causes
- * a jam in that state.
- */
- b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
- b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
-
- b->yy_buf_pos = &b->yy_ch_buf[0];
-
- b->yy_at_bol = 1;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- if ( b == YY_CURRENT_BUFFER )
- librecode_yy_load_buffer_state( );
-}
-
-/** Pushes the new state onto the stack. The new state becomes
- * the current state. This function will allocate the stack
- * if necessary.
- * @param new_buffer The new state.
- *
- */
-void librecode_yypush_buffer_state (YY_BUFFER_STATE new_buffer )
-{
- if (new_buffer == NULL)
- return;
-
- librecode_yyensure_buffer_stack();
-
- /* This block is copied from librecode_yy_switch_to_buffer. */
- if ( YY_CURRENT_BUFFER )
- {
- /* Flush out information for old buffer. */
- *(yy_c_buf_p) = (yy_hold_char);
- YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
- YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
- }
-
- /* Only push if top exists. Otherwise, replace top. */
- if (YY_CURRENT_BUFFER)
- (yy_buffer_stack_top)++;
- YY_CURRENT_BUFFER_LVALUE = new_buffer;
-
- /* copied from librecode_yy_switch_to_buffer. */
- librecode_yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
-}
-
-/** Removes and deletes the top of the stack, if present.
- * The next element becomes the new top.
- *
- */
-void librecode_yypop_buffer_state (void)
-{
- if (!YY_CURRENT_BUFFER)
- return;
-
- librecode_yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- if ((yy_buffer_stack_top) > 0)
- --(yy_buffer_stack_top);
-
- if (YY_CURRENT_BUFFER) {
- librecode_yy_load_buffer_state( );
- (yy_did_buffer_switch_on_eof) = 1;
- }
-}
-
-/* Allocates the stack if it does not exist.
- * Guarantees space for at least one push.
- */
-static void librecode_yyensure_buffer_stack (void)
-{
- int num_to_alloc;
-
- if (!(yy_buffer_stack)) {
-
- /* First allocation is just for 2 elements, since we don't know if this
- * scanner will even need a stack. We use 2 instead of 1 to avoid an
- * immediate realloc on the next call.
- */
- num_to_alloc = 1;
- (yy_buffer_stack) = (struct yy_buffer_state**)librecode_yyalloc
- (num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in librecode_yyensure_buffer_stack()" );
-
- memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
-
- (yy_buffer_stack_max) = num_to_alloc;
- (yy_buffer_stack_top) = 0;
- return;
- }
-
- if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
-
- /* Increase the buffer to prepare for a possible push. */
- int grow_size = 8 /* arbitrary grow size */;
-
- num_to_alloc = (yy_buffer_stack_max) + grow_size;
- (yy_buffer_stack) = (struct yy_buffer_state**)librecode_yyrealloc
- ((yy_buffer_stack),
- num_to_alloc * sizeof(struct yy_buffer_state*)
- );
- if ( ! (yy_buffer_stack) )
- YY_FATAL_ERROR( "out of dynamic memory in librecode_yyensure_buffer_stack()" );
-
- /* zero only the new slots.*/
- memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
- (yy_buffer_stack_max) = num_to_alloc;
- }
-}
-
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE librecode_yy_scan_buffer (char * base, yy_size_t size )
-{
- YY_BUFFER_STATE b;
-
- if ( size < 2 ||
- base[size-2] != YY_END_OF_BUFFER_CHAR ||
- base[size-1] != YY_END_OF_BUFFER_CHAR )
- /* They forgot to leave room for the EOB's. */
- return 0;
-
- b = (YY_BUFFER_STATE) librecode_yyalloc(sizeof( struct yy_buffer_state ) );
- if ( ! b )
- YY_FATAL_ERROR( "out of dynamic memory in librecode_yy_scan_buffer()" );
-
- b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
- b->yy_buf_pos = b->yy_ch_buf = base;
- b->yy_is_our_buffer = 0;
- b->yy_input_file = 0;
- b->yy_n_chars = b->yy_buf_size;
- b->yy_is_interactive = 0;
- b->yy_at_bol = 1;
- b->yy_fill_buffer = 0;
- b->yy_buffer_status = YY_BUFFER_NEW;
-
- librecode_yy_switch_to_buffer(b );
-
- return b;
-}
-
-/** Setup the input buffer state to scan a string. The next call to librecode_yylex() will
- * scan from a @e copy of @a str.
- * @param yystr a NUL-terminated string to scan
- *
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
- * librecode_yy_scan_bytes() instead.
- */
-YY_BUFFER_STATE librecode_yy_scan_string (yyconst char * yystr )
-{
-
- return librecode_yy_scan_bytes(yystr,strlen(yystr) );
-}
-
-/** Setup the input buffer state to scan the given bytes. The next call to librecode_yylex() will
- * scan from a @e copy of @a bytes.
- * @param yybytes the byte buffer to scan
- * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes.
- *
- * @return the newly allocated buffer state object.
- */
-YY_BUFFER_STATE librecode_yy_scan_bytes (yyconst char * yybytes, int _yybytes_len )
-{
- YY_BUFFER_STATE b;
- char *buf;
- yy_size_t n;
- int i;
-
- /* Get memory for full buffer, including space for trailing EOB's. */
- n = _yybytes_len + 2;
- buf = (char *) librecode_yyalloc(n );
- if ( ! buf )
- YY_FATAL_ERROR( "out of dynamic memory in librecode_yy_scan_bytes()" );
-
- for ( i = 0; i < _yybytes_len; ++i )
- buf[i] = yybytes[i];
-
- buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
-
- b = librecode_yy_scan_buffer(buf,n );
- if ( ! b )
- YY_FATAL_ERROR( "bad buffer in librecode_yy_scan_bytes()" );
-
- /* It's okay to grow etc. this buffer, and we should throw it
- * away when we're done.
- */
- b->yy_is_our_buffer = 1;
-
- return b;
-}
-
-#ifndef YY_EXIT_FAILURE
-#define YY_EXIT_FAILURE 2
-#endif
-
-static void yy_fatal_error (yyconst char* msg )
-{
- (void) fprintf( stderr, "%s\n", msg );
- exit( YY_EXIT_FAILURE );
-}
-
-/* Redefine yyless() so it works in section 3 code. */
-
-#undef yyless
-#define yyless(n) \
- do \
- { \
- /* Undo effects of setting up librecode_yytext. */ \
- int yyless_macro_arg = (n); \
- YY_LESS_LINENO(yyless_macro_arg);\
- librecode_yytext[librecode_yyleng] = (yy_hold_char); \
- (yy_c_buf_p) = librecode_yytext + yyless_macro_arg; \
- (yy_hold_char) = *(yy_c_buf_p); \
- *(yy_c_buf_p) = '\0'; \
- librecode_yyleng = yyless_macro_arg; \
- } \
- while ( 0 )
-
-/* Accessor methods (get/set functions) to struct members. */
-
-/** Get the current line number.
- *
- */
-int librecode_yyget_lineno (void)
-{
-
- return librecode_yylineno;
-}
-
-/** Get the input stream.
- *
- */
-FILE *librecode_yyget_in (void)
-{
- return librecode_yyin;
-}
-
-/** Get the output stream.
- *
- */
-FILE *librecode_yyget_out (void)
-{
- return librecode_yyout;
-}
-
-/** Get the length of the current token.
- *
- */
-int librecode_yyget_leng (void)
-{
- return librecode_yyleng;
-}
-
-/** Get the current token.
- *
- */
-
-char *librecode_yyget_text (void)
-{
- return librecode_yytext;
-}
-
-/** Set the current line number.
- * @param line_number
- *
- */
-void librecode_yyset_lineno (int line_number )
-{
-
- librecode_yylineno = line_number;
-}
-
-/** Set the input stream. This does not discard the current
- * input buffer.
- * @param in_str A readable stream.
- *
- * @see librecode_yy_switch_to_buffer
- */
-void librecode_yyset_in (FILE * in_str )
-{
- librecode_yyin = in_str ;
-}
-
-void librecode_yyset_out (FILE * out_str )
-{
- librecode_yyout = out_str ;
-}
-
-int librecode_yyget_debug (void)
-{
- return librecode_yy_flex_debug;
-}
-
-void librecode_yyset_debug (int bdebug )
-{
- librecode_yy_flex_debug = bdebug ;
-}
-
-static int yy_init_globals (void)
-{
- /* Initialization is the same as for the non-reentrant scanner.
- * This function is called from librecode_yylex_destroy(), so don't allocate here.
- */
-
- (yy_buffer_stack) = 0;
- (yy_buffer_stack_top) = 0;
- (yy_buffer_stack_max) = 0;
- (yy_c_buf_p) = (char *) 0;
- (yy_init) = 0;
- (yy_start) = 0;
-
-/* Defined in main.c */
-#ifdef YY_STDINIT
- librecode_yyin = stdin;
- librecode_yyout = stdout;
-#else
- librecode_yyin = (FILE *) 0;
- librecode_yyout = (FILE *) 0;
-#endif
-
- /* For future reference: Set errno on error, since we are called by
- * librecode_yylex_init()
- */
- return 0;
-}
-
-/* librecode_yylex_destroy is for both reentrant and non-reentrant scanners. */
-int librecode_yylex_destroy (void)
-{
-
- /* Pop the buffer stack, destroying each element. */
- while(YY_CURRENT_BUFFER){
- librecode_yy_delete_buffer(YY_CURRENT_BUFFER );
- YY_CURRENT_BUFFER_LVALUE = NULL;
- librecode_yypop_buffer_state();
- }
-
- /* Destroy the stack itself. */
- librecode_yyfree((yy_buffer_stack) );
- (yy_buffer_stack) = NULL;
-
- /* Reset the globals. This is important in a non-reentrant scanner so the next time
- * librecode_yylex() is called, initialization will occur. */
- yy_init_globals( );
-
- return 0;
-}
-
-/*
- * Internal utility routines.
- */
-
-#ifndef yytext_ptr
-static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
-{
- register int i;
- for ( i = 0; i < n; ++i )
- s1[i] = s2[i];
-}
-#endif
-
-#ifdef YY_NEED_STRLEN
-static int yy_flex_strlen (yyconst char * s )
-{
- register int n;
- for ( n = 0; s[n]; ++n )
- ;
-
- return n;
-}
-#endif
-
-void *librecode_yyalloc (yy_size_t size )
-{
- return (void *) malloc( size );
-}
-
-void *librecode_yyrealloc (void * ptr, yy_size_t size )
-{
- /* The cast to (char *) in the following accommodates both
- * implementations that use char* generic pointers, and those
- * that use void* generic pointers. It works with the latter
- * because both ANSI C and C++ allow castless assignment from
- * any pointer type to void*, and deal with argument conversions
- * as though doing an assignment.
- */
- return (void *) realloc( (char *) ptr, size );
-}
-
-void librecode_yyfree (void * ptr )
-{
- free( (char *) ptr ); /* see librecode_yyrealloc() for (char *) cast */
-}
-
-#define YYTABLES_NAME "yytables"
-
-
-
-/* Conversion of files between different charsets and surfaces.
- Copyright © 1990, 93, 94, 97, 98, 99, 00 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
- Contributed by François Pinard <pinard@iro.umontreal.ca>, 1988.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License
- as published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied warranty
- of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the Recode Library; see the file `COPYING.LIB'.
- If not, write to the Free Software Foundation, Inc., 59 Temple Place -
- Suite 330, Boston, MA 02111-1307, USA. */
-
-
-static bool
-transform_ascii_latin1 (RECODE_SUBTASK subtask_argument)
-{
- subtask = subtask_argument;
- request = subtask->task->request;
- yy_init = 0;
- librecode_yyin = subtask->input.file;
- librecode_yyout = subtask->output.file;
- BEGIN ascii_latin1;
- return librecode_yylex ();
-}
-
-bool
-module_ascii_latin1 (RECODE_OUTER outer)
-{
- if (!declare_single (outer, "ASCII-BS", "Latin-1",
- outer->quality_variable_to_byte,
- NULL, transform_ascii_latin1))
- return false;
-
- return true;
-}
-
-void
-delmodule_ascii_latin1 (RECODE_OUTER outer)
-{
-}
-/* Conversion of files between different charsets and surfaces.
- Copyright © 1990, 93, 97, 98, 99, 00 Free Software Foundation, Inc.
- Contributed by François Pinard <pinard@iro.umontreal.ca>, 1988.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License
- as published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied warranty
- of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the Recode Library; see the file `COPYING.LIB'.
- If not, write to the Free Software Foundation, Inc., 59 Temple Place -
- Suite 330, Boston, MA 02111-1307, USA. */
-
-
-static bool
-transform_latex_latin1 (RECODE_SUBTASK subtask_argument)
-{
- subtask = subtask_argument;
- request = subtask->task->request;
- yy_init = 0;
- librecode_yyin = subtask->input.file;
- librecode_yyout = subtask->output.file;
- BEGIN latex_latin1;
- return librecode_yylex ();
-}
-
-bool
-module_latex_latin1 (RECODE_OUTER outer)
-{
- return
- declare_single (outer, "LaTeX", "Latin-1",
- outer->quality_variable_to_byte,
- NULL, transform_latex_latin1)
- && declare_alias (outer, "TeX", "LaTeX")
- && declare_alias (outer, "ltex", "LaTeX");
-}
-
-void
-delmodule_latex_latin1 (RECODE_OUTER outer)
-{
-}
-/* Conversion of files between different charsets and surfaces.
- Copyright © 1990, 93, 94, 97, 98, 99, 00 Free Software Foundation, Inc.
- Contributed by François Pinard <pinard@iro.umontreal.ca>, 1989.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License
- as published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied warranty
- of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the Recode Library; see the file `COPYING.LIB'.
- If not, write to the Free Software Foundation, Inc., 59 Temple Place -
- Suite 330, Boston, MA 02111-1307, USA. */
-
-
-static bool
-transform_texte_latin1 (RECODE_SUBTASK subtask_argument)
-{
- subtask = subtask_argument;
- request = subtask->task->request;
- yy_init = 0;
- librecode_yyin = subtask->input.file;
- librecode_yyout = subtask->output.file;
- BEGIN texte_latin1;
- return librecode_yylex ();
-}
-
-void
-texte_latin1_diaeresis (void)
-{
- unsigned counter;
-
- for (counter = 0; counter < librecode_yyleng; counter++)
- if (librecode_yytext[counter+1] == request->diaeresis_char)
- {
- switch (librecode_yytext[counter])
- {
- /* The next "case 'A'" line once triggered a `NULL in input'
- diagnostic in flex. This astonishing bug has been hard to
- isolate, so I'll leave this comment around for a while. */
-
- case 'A': put_byte (196, subtask); break;
- case 'E': put_byte (203, subtask); break;
- case 'I': put_byte (207, subtask); break;
- case 'O': put_byte (214, subtask); break;
- case 'U': put_byte (220, subtask); break;
- case 'a': put_byte (228, subtask); break;
- case 'e': put_byte (235, subtask); break;
- case 'i': put_byte (239, subtask); break;
- case 'o': put_byte (246, subtask); break;
- case 'u': put_byte (252, subtask); break;
- case 'y': put_byte (255, subtask); break;
- default: put_byte (librecode_yytext[counter], subtask);
- }
- counter++;
- }
- else
- put_byte (librecode_yytext[counter], subtask);
-}
-
-bool
-module_texte_latin1 (RECODE_OUTER outer)
-{
- return
- declare_single (outer, "Texte", "Latin-1",
- outer->quality_variable_to_byte, NULL,
- transform_texte_latin1)
- && declare_alias (outer, "txte", "Texte");
-}
-
-void
-delmodule_texte_latin1 (RECODE_OUTER outer)
-{
-}
-
+++ /dev/null
-.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.35.
-.TH RECODE "1" "December 2013" "recode 3.7-beta2" "User Commands"
-.SH NAME
-recode \- converts files between character sets
-.SH SYNOPSIS
-.B lt-recode
-[\fIOPTION\fR]... [ [\fICHARSET\fR] \fI| REQUEST \fR[\fIFILE\fR]... ]
-.SH DESCRIPTION
-Recode converts files between various character sets and surfaces.
-.PP
-If a long option shows an argument as mandatory, then it is mandatory
-for the equivalent short option also. Similarly for optional arguments.
-.SS "Listings:"
-.TP
-\fB\-l\fR, \fB\-\-list\fR[=\fIFORMAT\fR]
-list one or all known charsets and aliases
-.TP
-\fB\-k\fR, \fB\-\-known\fR=\fIPAIRS\fR
-restrict charsets according to known PAIRS list
-.TP
-\fB\-h\fR, \fB\-\-header[\fR=\fI[LN\fR/]NAME]
-write table NAME on stdout using LN, then exit
-.TP
-\fB\-F\fR, \fB\-\-freeze\-tables\fR
-write out a C module holding all tables
-.TP
-\fB\-T\fR, \fB\-\-find\-subsets\fR
-report all charsets being subset of others
-.TP
-\fB\-C\fR, \fB\-\-copyright\fR
-display Copyright and copying conditions
-.TP
-\fB\-\-help\fR
-display this help and exit
-.TP
-\fB\-\-version\fR
-output version information and exit
-.SS "Operation modes:"
-.TP
-\fB\-v\fR, \fB\-\-verbose\fR
-explain sequence of steps and report progress
-.TP
-\fB\-q\fR, \fB\-\-quiet\fR, \fB\-\-silent\fR
-inhibit messages about irreversible recodings
-.TP
-\fB\-f\fR, \fB\-\-force\fR
-force recodings even when not reversible
-.TP
-\fB\-t\fR, \fB\-\-touch\fR
-touch the recoded files after replacement
-.TP
-\fB\-i\fR, \fB\-\-sequence\fR=\fIfiles\fR
-use intermediate files for sequencing passes
-.TP
-\fB\-\-sequence\fR=\fImemory\fR
-use memory buffers for sequencing passes
-.TP
-\fB\-p\fR, \fB\-\-sequence\fR=\fIpipe\fR
-use pipe machinery for sequencing passes
-.SS "Fine tuning:"
-.TP
-\fB\-s\fR, \fB\-\-strict\fR
-use strict mappings, even loose characters
-.TP
-\fB\-d\fR, \fB\-\-diacritics\fR
-convert only diacritics or alike for HTML/LaTeX
-.TP
-\fB\-S\fR, \fB\-\-source\fR[=\fILN\fR]
-limit recoding to strings and comments as for LN
-.TP
-\fB\-c\fR, \fB\-\-colons\fR
-use colons instead of double quotes for diaeresis
-.TP
-\fB\-g\fR, \fB\-\-graphics\fR
-approximate IBMPC rulers by ASCII graphics
-.TP
-\fB\-x\fR, \fB\-\-ignore\fR=\fICHARSET\fR
-ignore CHARSET while choosing a recoding path
-.PP
-Option \fB\-l\fR with no FORMAT nor CHARSET list available charsets and surfaces.
-FORMAT is `decimal', `octal', `hexadecimal' or `full' (or one of `dohf').
-Unless DEFAULT_CHARSET is set in environment, CHARSET defaults to the locale
-dependent encoding, determined by LC_ALL, LC_CTYPE, LANG.
-With \fB\-k\fR, possible before charsets are listed for the given after CHARSET,
-both being tabular charsets, with PAIRS of the form `BEF1:AFT1,BEF2:AFT2,...'
-and BEFs and AFTs being codes are given as decimal numbers.
-LN is some language, it may be `c', `perl' or `po'; `c' is the default.
-.PP
-REQUEST is SUBREQUEST[,SUBREQUEST]...; SUBREQUEST is ENCODING[..ENCODING]...
-ENCODING is [CHARSET][/[SURFACE]]...; REQUEST often looks like BEFORE..AFTER,
-with BEFORE and AFTER being charsets. An omitted CHARSET implies the usual
-charset; an omitted [/SURFACE]... means the implied surfaces for CHARSET; a /
-with an empty surface name means no surfaces at all. See the manual.
-.PP
-If none of \fB\-i\fR and \fB\-p\fR are given, presume \fB\-p\fR if no FILE, else \fB\-i\fR.
-Each FILE is recoded over itself, destroying the original. If no
-FILE is specified, then act as a filter and recode stdin to stdout.
-.SH AUTHOR
-Written by Franc,ois Pinard <pinard@iro.umontreal.ca>.
-.SH "REPORTING BUGS"
-Report bugs to <recode\-bugs@iro.umontreal.ca>.
-.SH COPYRIGHT
-Copyright \(co 1990, 92-94, 96, 97, 99, 08 Free Software Foundation, Inc.
-.br
-This is free software; see the source for copying conditions. There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-.SH "SEE ALSO"
-The full documentation for
-.B recode
-is maintained as a Texinfo manual. If the
-.B info
-and
-.B recode
-programs are properly installed at your site, the command
-.IP
-.B info recode
-.PP
-should give you access to the complete manual.
+++ /dev/null
-# Makefile.in generated by automake 1.13.3 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile for Recode regression tests.
-# Copyright © 1996-2000, 2008 Free Software Foundation, Inc.
-# François Pinard <pinard@iro.umontreal.ca>, 1988.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = tests
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/mkinstalldirs $(srcdir)/setup.py.in ChangeLog
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/m4/codeset.m4 \
- $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/glibc21.m4 \
- $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \
- $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
- $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
- $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
- $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/malloc.m4 \
- $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
- $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/realloc.m4 \
- $(top_srcdir)/m4/utimbuf.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES = setup.py
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-ALLOCA = @ALLOCA@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DLLTOOL = @DLLTOOL@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-FGREP = @FGREP@
-GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
-GLIBC21 = @GLIBC21@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MANIFEST_TOOL = @MANIFEST_TOOL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-OBJDUMP = @OBJDUMP@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = gnits
-
-# LIMIT= may limit testing. For example, "make check LIMIT='-l 1'" stops
-# testing after the first error, "make check LIMIT='-k utf7' runs files
-# matched by the "utf7" regexp. Try "./pytest -h" for a list of options.
-SUITE = t21_names.py t22_lists.py t25_subsets.py t30_base64.py \
-t30_dumps.py t30_quoted.py t40_african.py t40_combine.py t40_testdump.py \
-t40_utf7.py t40_utf8.py t50_methods.py t90_bigauto.py
-
-EXTRA_DIST = NOTES Recode.c Recode.pyx pytest common.py $(SUITE)
-CLEANFILES = Recode.so
-PYTHON = python
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits tests/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --gnits tests/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-setup.py: $(top_builddir)/config.status $(srcdir)/setup.py.in
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
-check-am: all-am
- $(MAKE) $(AM_MAKEFLAGS) check-local
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: check-am install-am install-strip
-
-.PHONY: all all-am check check-am check-local clean clean-generic \
- clean-libtool cscopelist-am ctags-am distclean \
- distclean-generic distclean-libtool distdir dvi dvi-am html \
- html-am info info-am install install-am install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-html install-html-am install-info \
- install-info-am install-man install-pdf install-pdf-am \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
- uninstall-am
-
-
-check-local: Recode.so
- RECODE=../src/recode PYTHONPATH=.:$(srcdir) \
- $(PYTHON) $(srcdir)/pytest $(LIMIT) $(srcdir)/t*.py
-
-Recode.so: Recode.c setup.py
- rm -f *.so
- $(PYTHON) setup.py build_ext --inplace
- rm -fr build
-
-Recode.c: Recode.pyx
- cd $(srcdir) && cython -3 Recode.pyx
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
projects / recode / commitdiff