struct ConfigDef MuttVars[] = {
/*++*/
- { "abort_noattach", DT_QUAD, R_NONE, &C_AbortNoattach, MUTT_NO },
+ { "abort_noattach", DT_QUAD, 0, &C_AbortNoattach, MUTT_NO },
/*
** .pp
** If set to \fIyes\fP, when composing messages containing the regular
** set abort_noattach_regex = "\\<attach(|ed|ments?)\\>"
** .te
*/
- { "abort_noattach_regex", DT_REGEX, R_NONE, &C_AbortNoattachRegex, IP "\\<(attach|attached|attachments?)\\>" },
+ { "abort_noattach_regex", DT_REGEX, 0, &C_AbortNoattachRegex, IP "\\<(attach|attached|attachments?)\\>" },
/*
** .pp
** Specifies a regular expression to match against the body of the message, to
** if the pattern contains at least one upper case letter, and case
** insensitive otherwise.
*/
- { "abort_nosubject", DT_QUAD, R_NONE, &C_AbortNosubject, MUTT_ASKYES },
+ { "abort_nosubject", DT_QUAD, 0, &C_AbortNosubject, MUTT_ASKYES },
/*
** .pp
** If set to \fIyes\fP, when composing messages and no subject is given
** \fIno\fP, composing messages with no subject given at the subject
** prompt will never be aborted.
*/
- { "abort_unmodified", DT_QUAD, R_NONE, &C_AbortUnmodified, MUTT_YES },
+ { "abort_unmodified", DT_QUAD, 0, &C_AbortUnmodified, MUTT_YES },
/*
** .pp
** If set to \fIyes\fP, composition will automatically abort after
** check only happens after the \fIfirst\fP edit of the file). When set
** to \fIno\fP, composition will never be aborted.
*/
- { "alias_file", DT_PATH, R_NONE, &C_AliasFile, IP "~/.neomuttrc" },
+ { "alias_file", DT_PATH, 0, &C_AliasFile, IP "~/.neomuttrc" },
/*
** .pp
** The default file in which to save aliases created by the
** The default for this option is the currently used neomuttrc file, or
** "~/.neomuttrc" if no user neomuttrc was found.
*/
- { "alias_format", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_AliasFormat, IP "%4n %2f %t %-10a %r" },
+ { "alias_format", DT_STRING|DT_NOT_EMPTY, 0, &C_AliasFormat, IP "%4n %2f %t %-10a %r" },
/*
** .pp
** Specifies the format of the data displayed for the "$alias" menu. The
** .dt %t .dd Character which indicates if the alias is tagged for inclusion
** .de
*/
- { "allow_8bit", DT_BOOL, R_NONE, &C_Allow8bit, true },
+ { "allow_8bit", DT_BOOL, 0, &C_Allow8bit, true },
/*
** .pp
** Controls whether 8-bit data is converted to 7-bit using either Quoted-
** Printable or Base64 encoding when sending mail.
*/
- { "allow_ansi", DT_BOOL, R_NONE, &C_AllowAnsi, false },
+ { "allow_ansi", DT_BOOL, 0, &C_AllowAnsi, false },
/*
** .pp
** Controls whether ANSI color codes in messages (and color tags in
** and give it the same color as your attachment color (see also
** $$crypt_timestamp).
*/
- { "arrow_cursor", DT_BOOL, R_MENU, &C_ArrowCursor, false },
+ { "arrow_cursor", DT_BOOL|R_MENU, 0, &C_ArrowCursor, false },
/*
** .pp
** When \fIset\fP, an arrow ("->") will be used to indicate the current entry
** be redrawn on the screen when moving to the next or previous entries
** in the menu.
*/
- { "ascii_chars", DT_BOOL, R_INDEX|R_PAGER, &C_AsciiChars, false },
+ { "ascii_chars", DT_BOOL|R_INDEX|R_PAGER, 0, &C_AsciiChars, false },
/*
** .pp
** If \fIset\fP, NeoMutt will use plain ASCII characters when displaying thread
** and attachment trees, instead of the default \fIACS\fP characters.
*/
#ifdef USE_NNTP
- { "ask_follow_up", DT_BOOL, R_NONE, &C_AskFollowUp, false },
+ { "ask_follow_up", DT_BOOL, 0, &C_AskFollowUp, false },
/*
** .pp
** If set, NeoMutt will prompt you for follow-up groups before editing
** the body of an outgoing message.
*/
- { "ask_x_comment_to", DT_BOOL, R_NONE, &C_AskXCommentTo, false },
+ { "ask_x_comment_to", DT_BOOL, 0, &C_AskXCommentTo, false },
/*
** .pp
** If set, NeoMutt will prompt you for x-comment-to field before editing
** the body of an outgoing message.
*/
#endif
- { "askbcc", DT_BOOL, R_NONE, &C_Askbcc, false },
+ { "askbcc", DT_BOOL, 0, &C_Askbcc, false },
/*
** .pp
** If \fIset\fP, NeoMutt will prompt you for blind-carbon-copy (Bcc) recipients
** before editing an outgoing message.
*/
- { "askcc", DT_BOOL, R_NONE, &C_Askcc, false },
+ { "askcc", DT_BOOL, 0, &C_Askcc, false },
/*
** .pp
** If \fIset\fP, NeoMutt will prompt you for carbon-copy (Cc) recipients before
** editing the body of an outgoing message.
*/
- { "assumed_charset", DT_STRING, R_NONE, &C_AssumedCharset, 0, charset_validator },
+ { "assumed_charset", DT_STRING, 0, &C_AssumedCharset, 0, charset_validator },
/*
** .pp
** This variable is a colon-separated list of character encoding
** .pp
** However, only the first content is valid for the message body.
*/
- { "attach_charset", DT_STRING, R_NONE, &C_AttachCharset, 0, charset_validator },
+ { "attach_charset", DT_STRING, 0, &C_AttachCharset, 0, charset_validator },
/*
** .pp
** This variable is a colon-separated list of character encoding
** Note: for Japanese users, "iso-2022-*" must be put at the head
** of the value as shown above if included.
*/
- { "attach_format", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_AttachFormat, IP "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " },
+ { "attach_format", DT_STRING|DT_NOT_EMPTY, 0, &C_AttachFormat, IP "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " },
/*
** .pp
** This variable describes the format of the "attachment" menu. The
** .pp
** For an explanation of "soft-fill", see the $$index_format documentation.
*/
- { "attach_save_dir", DT_PATH, R_NONE, &C_AttachSaveDir, IP "./" },
+ { "attach_save_dir", DT_PATH, 0, &C_AttachSaveDir, IP "./" },
/*
** .pp
** The directory where attachments are saved.
*/
- { "attach_save_without_prompting", DT_BOOL, R_NONE, &C_AttachSaveWithoutPrompting, false },
+ { "attach_save_without_prompting", DT_BOOL, 0, &C_AttachSaveWithoutPrompting, false },
/*
** .pp
** This variable, when set to true, will cause attachments to be saved to the
** 'attach_save_dir' location without prompting the user for the filename.
** .pp
*/
- { "attach_sep", DT_STRING, R_NONE, &C_AttachSep, IP "\n" },
+ { "attach_sep", DT_STRING, 0, &C_AttachSep, IP "\n" },
/*
** .pp
** The separator to add between attachments when operating (saving,
** printing, piping, etc) on a list of tagged attachments.
*/
- { "attach_split", DT_BOOL, R_NONE, &C_AttachSplit, true },
+ { "attach_split", DT_BOOL, 0, &C_AttachSplit, true },
/*
** .pp
** If this variable is \fIunset\fP, when operating (saving, printing, piping,
** $$attach_sep separator is added after each attachment. When \fIset\fP,
** NeoMutt will operate on the attachments one by one.
*/
- { "attribution", DT_STRING, R_NONE, &C_Attribution, IP "On %d, %n wrote:" },
+ { "attribution", DT_STRING, 0, &C_Attribution, IP "On %d, %n wrote:" },
/*
** .pp
** This is the string that will precede a message which has been included
** in a reply. For a full listing of defined \fCprintf(3)\fP-like sequences see
** the section on $$index_format.
*/
- { "attribution_locale", DT_STRING, R_NONE, &C_AttributionLocale, 0 },
+ { "attribution_locale", DT_STRING, 0, &C_AttributionLocale, 0 },
/*
** .pp
** The locale used by \fCstrftime(3)\fP to format dates in the
** will use your locale environment, so there is no need to set
** this except to override that default.
*/
- { "auto_subscribe", DT_BOOL, R_NONE, &C_AutoSubscribe, false },
+ { "auto_subscribe", DT_BOOL, 0, &C_AutoSubscribe, false },
/*
** .pp
** When \fIset\fP, Mutt assumes the presence of a List-Post header
** to the "$subscribe" list. Parsing and checking these things slows
** header reading down, so this option is disabled by default.
*/
- { "auto_tag", DT_BOOL, R_NONE, &C_AutoTag, false },
+ { "auto_tag", DT_BOOL, 0, &C_AutoTag, false },
/*
** .pp
** When \fIset\fP, functions in the \fIindex\fP menu which affect a message
** unset, you must first use the \fC<tag-prefix>\fP function (bound to ";"
** by default) to make the next function apply to all tagged messages.
*/
- { "autoedit", DT_BOOL, R_NONE, &C_Autoedit, false },
+ { "autoedit", DT_BOOL, 0, &C_Autoedit, false },
/*
** .pp
** When \fIset\fP along with $$edit_headers, NeoMutt will skip the initial
** .pp
** Also see $$fast_reply.
*/
- { "beep", DT_BOOL, R_NONE, &C_Beep, true },
+ { "beep", DT_BOOL, 0, &C_Beep, true },
/*
** .pp
** When this variable is \fIset\fP, NeoMutt will beep when an error occurs.
*/
- { "beep_new", DT_BOOL, R_NONE, &C_BeepNew, false },
+ { "beep_new", DT_BOOL, 0, &C_BeepNew, false },
/*
** .pp
** When this variable is \fIset\fP, NeoMutt will beep whenever it prints a message
** notifying you of new mail. This is independent of the setting of the
** $$beep variable.
*/
- { "bounce", DT_QUAD, R_NONE, &C_Bounce, MUTT_ASKYES },
+ { "bounce", DT_QUAD, 0, &C_Bounce, MUTT_ASKYES },
/*
** .pp
** Controls whether you will be asked to confirm bouncing messages.
** message. Setting this variable to \fIno\fP is not generally useful,
** and thus not recommended, because you are unable to bounce messages.
*/
- { "bounce_delivered", DT_BOOL, R_NONE, &C_BounceDelivered, true },
+ { "bounce_delivered", DT_BOOL, 0, &C_BounceDelivered, true },
/*
** .pp
** When this variable is \fIset\fP, NeoMutt will include Delivered-To headers when
** bouncing messages. Postfix users may wish to \fIunset\fP this variable.
*/
- { "braille_friendly", DT_BOOL, R_NONE, &C_BrailleFriendly, false },
+ { "braille_friendly", DT_BOOL, 0, &C_BrailleFriendly, false },
/*
** .pp
** When this variable is \fIset\fP, NeoMutt will place the cursor at the beginning
** follow these menus. The option is \fIunset\fP by default because many
** visual terminals don't permit making the cursor invisible.
*/
- { "browser_abbreviate_mailboxes", DT_BOOL, R_NONE, &C_BrowserAbbreviateMailboxes, true },
+ { "browser_abbreviate_mailboxes", DT_BOOL, 0, &C_BrowserAbbreviateMailboxes, true },
/*
** .pp
** When this variable is \fIset\fP, mutt will abbreviate mailbox
** desirable to \fIunset\fP this variable.
*/
#ifdef USE_NNTP
- { "catchup_newsgroup", DT_QUAD, R_NONE, &C_CatchupNewsgroup, MUTT_ASKYES },
+ { "catchup_newsgroup", DT_QUAD, 0, &C_CatchupNewsgroup, MUTT_ASKYES },
/*
** .pp
** If this variable is \fIset\fP, NeoMutt will mark all articles in newsgroup
*/
#endif
#ifdef USE_SSL
- { "certificate_file", DT_PATH, R_NONE, &C_CertificateFile, IP "~/.mutt_certificates" },
+ { "certificate_file", DT_PATH, 0, &C_CertificateFile, IP "~/.mutt_certificates" },
/*
** .pp
** This variable specifies the file where the certificates you trust
** .te
*/
#endif
- { "change_folder_next", DT_BOOL, R_NONE, &C_ChangeFolderNext, false },
+ { "change_folder_next", DT_BOOL, 0, &C_ChangeFolderNext, false },
/*
** .pp
** When this variable is \fIset\fP, the \fC<change-folder>\fP function
** mailbox suggestion will start at the next folder in your "$mailboxes"
** list, instead of starting at the first folder in the list.
*/
- { "charset", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_Charset, 0, charset_validator },
+ { "charset", DT_STRING|DT_NOT_EMPTY, 0, &C_Charset, 0, charset_validator },
/*
** .pp
** Character set your terminal uses to display and enter textual data.
** \fBNote:\fP It should only be set in case NeoMutt isn't able to determine the
** character set used correctly.
*/
- { "check_mbox_size", DT_BOOL, R_NONE, &C_CheckMboxSize, false },
+ { "check_mbox_size", DT_BOOL, 0, &C_CheckMboxSize, false },
/*
** .pp
** When this variable is \fIset\fP, NeoMutt will use file size attribute instead of
** mailbox by performing a fast mailbox scan when it is defined.
** Afterwards the new mail status is tracked by file size changes.
*/
- { "check_new", DT_BOOL, R_NONE, &C_CheckNew, true },
+ { "check_new", DT_BOOL, 0, &C_CheckNew, true },
/*
** .pp
** \fBNote:\fP this option only affects \fImaildir\fP and \fIMH\fP style
** this variable is \fIunset\fP, no check for new mail is performed
** while the mailbox is open.
*/
- { "collapse_all", DT_BOOL, R_NONE, &C_CollapseAll, false },
+ { "collapse_all", DT_BOOL, 0, &C_CollapseAll, false },
/*
** .pp
** When \fIset\fP, NeoMutt will collapse all threads when entering a folder.
*/
- { "collapse_flagged", DT_BOOL, R_NONE, &C_CollapseFlagged, true },
+ { "collapse_flagged", DT_BOOL, 0, &C_CollapseFlagged, true },
/*
** .pp
** When \fIunset\fP, NeoMutt will not collapse a thread if it contains any
** flagged messages.
*/
- { "collapse_unread", DT_BOOL, R_NONE, &C_CollapseUnread, true },
+ { "collapse_unread", DT_BOOL, 0, &C_CollapseUnread, true },
/*
** .pp
** When \fIunset\fP, NeoMutt will not collapse a thread if it contains any
** unread messages.
*/
- { "compose_format", DT_STRING, R_MENU, &C_ComposeFormat, IP "-- NeoMutt: Compose [Approx. msg size: %l Atts: %a]%>-" },
+ { "compose_format", DT_STRING|R_MENU, 0, &C_ComposeFormat, IP "-- NeoMutt: Compose [Approx. msg size: %l Atts: %a]%>-" },
/*
** .pp
** Controls the format of the status line displayed in the "compose"
** See the text describing the $$status_format option for more
** information on how to set $$compose_format.
*/
- { "config_charset", DT_STRING, R_NONE, &C_ConfigCharset, 0, charset_validator },
+ { "config_charset", DT_STRING, 0, &C_ConfigCharset, 0, charset_validator },
/*
** .pp
** When defined, NeoMutt will recode commands in rc files from this
** characters as question marks which can lead to undesired
** side effects (for example in regular expressions).
*/
- { "confirmappend", DT_BOOL, R_NONE, &C_Confirmappend, true },
+ { "confirmappend", DT_BOOL, 0, &C_Confirmappend, true },
/*
** .pp
** When \fIset\fP, NeoMutt will prompt for confirmation when appending messages to
** an existing mailbox.
*/
- { "confirmcreate", DT_BOOL, R_NONE, &C_Confirmcreate, true },
+ { "confirmcreate", DT_BOOL, 0, &C_Confirmcreate, true },
/*
** .pp
** When \fIset\fP, NeoMutt will prompt for confirmation when saving messages to a
** mailbox which does not yet exist before creating it.
*/
- { "connect_timeout", DT_NUMBER, R_NONE, &C_ConnectTimeout, 30 },
+ { "connect_timeout", DT_NUMBER, 0, &C_ConnectTimeout, 30 },
/*
** .pp
** Causes NeoMutt to timeout a network connection (for IMAP, POP or SMTP) after this
** many seconds if the connection is not able to be established. A negative
** value causes NeoMutt to wait indefinitely for the connection attempt to succeed.
*/
- { "content_type", DT_STRING, R_NONE, &C_ContentType, IP "text/plain" },
+ { "content_type", DT_STRING, 0, &C_ContentType, IP "text/plain" },
/*
** .pp
** Sets the default Content-Type for the body of newly composed messages.
*/
- { "copy", DT_QUAD, R_NONE, &C_Copy, MUTT_YES },
+ { "copy", DT_QUAD, 0, &C_Copy, MUTT_YES },
/*
** .pp
** This variable controls whether or not copies of your outgoing messages
** will be saved for later references. Also see $$record,
** $$save_name, $$force_name and "$fcc-hook".
*/
- { "crypt_autoencrypt", DT_BOOL, R_NONE, &C_CryptAutoencrypt, false },
+ { "crypt_autoencrypt", DT_BOOL, 0, &C_CryptAutoencrypt, false },
/*
** .pp
** Setting this variable will cause NeoMutt to always attempt to PGP
** settings can be overridden by use of the smime menu instead.
** (Crypto only)
*/
- { "crypt_autopgp", DT_BOOL, R_NONE, &C_CryptAutopgp, true },
+ { "crypt_autopgp", DT_BOOL, 0, &C_CryptAutopgp, true },
/*
** .pp
** This variable controls whether or not NeoMutt may automatically enable
** $$crypt_replyencrypt,
** $$crypt_autosign, $$crypt_replysign and $$smime_is_default.
*/
- { "crypt_autosign", DT_BOOL, R_NONE, &C_CryptAutosign, false },
+ { "crypt_autosign", DT_BOOL, 0, &C_CryptAutosign, false },
/*
** .pp
** Setting this variable will cause NeoMutt to always attempt to
** be overridden by use of the smime menu instead of the pgp menu.
** (Crypto only)
*/
- { "crypt_autosmime", DT_BOOL, R_NONE, &C_CryptAutosmime, true },
+ { "crypt_autosmime", DT_BOOL, 0, &C_CryptAutosmime, true },
/*
** .pp
** This variable controls whether or not NeoMutt may automatically enable
** $$crypt_replyencrypt,
** $$crypt_autosign, $$crypt_replysign and $$smime_is_default.
*/
- { "crypt_chars", DT_MBTABLE, R_INDEX|R_PAGER, &C_CryptChars, IP "SPsK " },
+ { "crypt_chars", DT_MBTABLE|R_INDEX|R_PAGER, 0, &C_CryptChars, IP "SPsK " },
/*
** .pp
** Controls the characters used in cryptography flags.
** .dt 5 .dd <space> .dd The mail has no crypto info.
** .de
*/
- { "crypt_confirmhook", DT_BOOL, R_NONE, &C_CryptConfirmhook, true },
+ { "crypt_confirmhook", DT_BOOL, 0, &C_CryptConfirmhook, true },
/*
** .pp
** If set, then you will be prompted for confirmation of keys when using
** be presented. This is generally considered unsafe, especially where
** typos are concerned.
*/
- { "crypt_opportunistic_encrypt", DT_BOOL, R_NONE, &C_CryptOpportunisticEncrypt, false },
+ { "crypt_opportunistic_encrypt", DT_BOOL, 0, &C_CryptOpportunisticEncrypt, false },
/*
** .pp
** Setting this variable will cause NeoMutt to automatically enable and
** be manually re-enabled in the pgp or smime menus.
** (Crypto only)
*/
- { "crypt_protected_headers_read", DT_BOOL, R_NONE, &C_CryptProtectedHeadersRead, true },
+ { "crypt_protected_headers_read", DT_BOOL, 0, &C_CryptProtectedHeadersRead, true },
/*
** .pp
** When set, Mutt will display protected headers ("Memory Hole") in the pager,
** the dummy Subject header, so be sure to open such a message first.
** (Crypto only)
*/
- { "crypt_protected_headers_save", DT_BOOL, R_NONE, &C_CryptProtectedHeadersSave, false },
+ { "crypt_protected_headers_save", DT_BOOL, 0, &C_CryptProtectedHeadersSave, false },
/*
** .pp
** When $$crypt_protected_headers_read is set, and a message with a
** you enable this variable.
** (Crypto only)
*/
- { "crypt_protected_headers_subject", DT_STRING, R_NONE, &C_CryptProtectedHeadersSubject, IP "Encrypted subject" },
+ { "crypt_protected_headers_subject", DT_STRING, 0, &C_CryptProtectedHeadersSubject, IP "Encrypted subject" },
/*
** .pp
** When $$crypt_protected_headers_write is set, and the message is marked
** to the empty string.
** (Crypto only)
*/
- { "crypt_protected_headers_write", DT_BOOL, R_NONE, &C_CryptProtectedHeadersWrite, false },
+ { "crypt_protected_headers_write", DT_BOOL, 0, &C_CryptProtectedHeadersWrite, false },
/*
** .pp
** When set, Mutt will generate protected headers ("Memory Hole") for
** Currently Mutt only supports the Subject header.
** (Crypto only)
*/
- { "crypt_replyencrypt", DT_BOOL, R_NONE, &C_CryptReplyencrypt, true },
+ { "crypt_replyencrypt", DT_BOOL, 0, &C_CryptReplyencrypt, true },
/*
** .pp
** If \fIset\fP, automatically PGP or OpenSSL encrypt replies to messages which are
** encrypted.
** (Crypto only)
*/
- { "crypt_replysign", DT_BOOL, R_NONE, &C_CryptReplysign, false },
+ { "crypt_replysign", DT_BOOL, 0, &C_CryptReplysign, false },
/*
** .pp
** If \fIset\fP, automatically PGP or OpenSSL sign replies to messages which are
** \fIand\fP signed!
** (Crypto only)
*/
- { "crypt_replysignencrypted", DT_BOOL, R_NONE, &C_CryptReplysignencrypted, false },
+ { "crypt_replysignencrypted", DT_BOOL, 0, &C_CryptReplysignencrypted, false },
/*
** .pp
** If \fIset\fP, automatically PGP or OpenSSL sign replies to messages
** to find out whether an encrypted message is also signed.
** (Crypto only)
*/
- { "crypt_timestamp", DT_BOOL, R_NONE, &C_CryptTimestamp, true },
+ { "crypt_timestamp", DT_BOOL, 0, &C_CryptTimestamp, true },
/*
** .pp
** If \fIset\fP, NeoMutt will include a time stamp in the lines surrounding
** you may \fIunset\fP this setting.
** (Crypto only)
*/
- { "crypt_use_gpgme", DT_BOOL, R_NONE, &C_CryptUseGpgme, false },
+ { "crypt_use_gpgme", DT_BOOL, 0, &C_CryptUseGpgme, false },
/*
** .pp
** This variable controls the use of the GPGME-enabled crypto backends.
** Note that the GPGME backend does not support creating old-style inline
** (traditional) PGP encrypted or signed messages (see $$pgp_autoinline).
*/
- { "crypt_use_pka", DT_BOOL, R_NONE, &C_CryptUsePka, false },
+ { "crypt_use_pka", DT_BOOL, 0, &C_CryptUsePka, false },
/*
** .pp
** Controls whether NeoMutt uses PKA
** (see http://www.g10code.de/docs/pka-intro.de.pdf) during signature
** verification (only supported by the GPGME backend).
*/
- { "crypt_verify_sig", DT_QUAD, R_NONE, &C_CryptVerifySig, MUTT_YES },
+ { "crypt_verify_sig", DT_QUAD, 0, &C_CryptVerifySig, MUTT_YES },
/*
** .pp
** If \fI"yes"\fP, always attempt to verify PGP or S/MIME signatures.
** If \fI"no"\fP, never attempt to verify cryptographic signatures.
** (Crypto only)
*/
- { "date_format", DT_STRING|DT_NOT_EMPTY, R_MENU, &C_DateFormat, IP "!%a, %b %d, %Y at %I:%M:%S%p %Z" },
+ { "date_format", DT_STRING|DT_NOT_EMPTY|R_MENU, 0, &C_DateFormat, IP "!%a, %b %d, %Y at %I:%M:%S%p %Z" },
/*
** .pp
** This variable controls the format of the date printed by the "%d"
** rest of the string are expanded in the \fIC\fP locale (that is in US
** English).
*/
- { "debug_file", DT_PATH, R_NONE, &C_DebugFile, IP "~/.neomuttdebug" },
+ { "debug_file", DT_PATH, 0, &C_DebugFile, IP "~/.neomuttdebug" },
/*
** .pp
** Debug logging is controlled by the variables \fC$$debug_file\fP and \fC$$debug_level\fP.
** .pp
** See also: \fC$$debug_level\fP
*/
- { "debug_level", DT_NUMBER, R_NONE, &C_DebugLevel, 0, level_validator },
+ { "debug_level", DT_NUMBER, 0, &C_DebugLevel, 0, level_validator },
/*
** .pp
** Debug logging is controlled by the variables \fC$$debug_file\fP and \fC$$debug_level\fP.
** .pp
** See also: \fC$$debug_file\fP
*/
- { "default_hook", DT_STRING, R_NONE, &C_DefaultHook, IP "~f %s !~P | (~P ~C %s)" },
+ { "default_hook", DT_STRING, 0, &C_DefaultHook, IP "~f %s !~P | (~P ~C %s)" },
/*
** .pp
** This variable controls how "$message-hook", "$reply-hook", "$send-hook",
** "$alternates") and is to or cc'ed to a user matching the given
** regular expression.
*/
- { "delete", DT_QUAD, R_NONE, &C_Delete, MUTT_ASKYES },
+ { "delete", DT_QUAD, 0, &C_Delete, MUTT_ASKYES },
/*
** .pp
** Controls whether or not messages are really deleted when closing or
** deleting will automatically be purged without prompting. If set to
** \fIno\fP, messages marked for deletion will be kept in the mailbox.
*/
- { "delete_untag", DT_BOOL, R_NONE, &C_DeleteUntag, true },
+ { "delete_untag", DT_BOOL, 0, &C_DeleteUntag, true },
/*
** .pp
** If this option is \fIset\fP, NeoMutt will untag messages when marking them
** for deletion. This applies when you either explicitly delete a message,
** or when you save it to another folder.
*/
- { "digest_collapse", DT_BOOL, R_NONE, &C_DigestCollapse, true },
+ { "digest_collapse", DT_BOOL, 0, &C_DigestCollapse, true },
/*
** .pp
** If this option is \fIset\fP, NeoMutt's received-attachments menu will not show the subparts of
** individual messages in a multipart/digest. To see these subparts, press "v" on that menu.
*/
- { "display_filter", DT_COMMAND, R_PAGER, &C_DisplayFilter, 0 },
+ { "display_filter", DT_COMMAND|R_PAGER, 0, &C_DisplayFilter, 0 },
/*
** .pp
** When set, specifies a command used to filter messages. When a message
** This can be fixed by adding this to your config:
** \fCcolor body magenta default '^\[-- .* --\]$$$'\fP.
*/
- { "dsn_notify", DT_STRING, R_NONE, &C_DsnNotify, 0 },
+ { "dsn_notify", DT_STRING, 0, &C_DsnNotify, 0 },
/*
** .pp
** This variable sets the request for when notification is returned. The
** for DSN. For SMTP delivery, DSN support is auto-detected so that it
** depends on the server whether DSN will be used or not.
*/
- { "dsn_return", DT_STRING, R_NONE, &C_DsnReturn, 0 },
+ { "dsn_return", DT_STRING, 0, &C_DsnReturn, 0 },
/*
** .pp
** This variable controls how much of your message is returned in DSN
** for DSN. For SMTP delivery, DSN support is auto-detected so that it
** depends on the server whether DSN will be used or not.
*/
- { "duplicate_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, &C_DuplicateThreads, true, pager_validator },
+ { "duplicate_threads", DT_BOOL|R_RESORT|R_RESORT_INIT|R_INDEX, 0, &C_DuplicateThreads, true, pager_validator },
/*
** .pp
** This variable controls whether NeoMutt, when $$sort is set to \fIthreads\fP, threads
** that it thinks they are duplicates of each other with an equals sign
** in the thread tree.
*/
- { "edit_headers", DT_BOOL, R_NONE, &C_EditHeaders, false },
+ { "edit_headers", DT_BOOL, 0, &C_EditHeaders, false },
/*
** .pp
** This option allows you to edit the header of your outgoing messages
** \fBNote\fP that changes made to the References: and Date: headers are
** ignored for interoperability reasons.
*/
- { "editor", DT_COMMAND, R_NONE, &C_Editor, IP "vi" },
+ { "editor", DT_COMMAND, 0, &C_Editor, IP "vi" },
/*
** .pp
** This variable specifies which editor is used by NeoMutt.
** .pp
** where \fIstring\fP is the expansion of \fC$$editor\fP described above.
*/
- { "empty_subject", DT_STRING, R_NONE, &C_EmptySubject, IP "Re: your mail" },
+ { "empty_subject", DT_STRING, 0, &C_EmptySubject, IP "Re: your mail" },
/*
** .pp
** This variable specifies the subject to be used when replying to an email
** with an empty subject. It defaults to "Re: your mail".
*/
- { "encode_from", DT_BOOL, R_NONE, &C_EncodeFrom, false },
+ { "encode_from", DT_BOOL, 0, &C_EncodeFrom, false },
/*
** .pp
** When \fIset\fP, NeoMutt will quoted-printable encode messages when
** misinterpreting the line as a mbox message separator).
*/
#ifdef USE_SSL_OPENSSL
- { "entropy_file", DT_PATH, R_NONE, &C_EntropyFile, 0 },
+ { "entropy_file", DT_PATH, 0, &C_EntropyFile, 0 },
/*
** .pp
** The file which includes random data that is used to initialize SSL
** library functions.
*/
#endif
- { "envelope_from_address", DT_ADDRESS, R_NONE, &C_EnvelopeFromAddress, 0 },
+ { "envelope_from_address", DT_ADDRESS, 0, &C_EnvelopeFromAddress, 0 },
/*
** .pp
** Manually sets the \fIenvelope\fP sender for outgoing messages.
** This value is ignored if $$use_envelope_from is \fIunset\fP.
*/
- { "escape", DT_STRING, R_NONE, &C_Escape, IP "~" },
+ { "escape", DT_STRING, 0, &C_Escape, IP "~" },
/*
** .pp
** Escape character to use for functions in the built-in editor.
*/
- { "external_search_command", DT_COMMAND, R_NONE, &C_ExternalSearchCommand, 0 },
+ { "external_search_command", DT_COMMAND, 0, &C_ExternalSearchCommand, 0 },
/*
** .pp
** If set, contains the name of the external program used by "~I" patterns.
** match the behavior of your indexer, but this should help users
** of indexers other than notmuch to integrate them cleanly with NeoMutt.
*/
- { "fast_reply", DT_BOOL, R_NONE, &C_FastReply, false },
+ { "fast_reply", DT_BOOL, 0, &C_FastReply, false },
/*
** .pp
** When \fIset\fP, the initial prompt for recipients and subject are skipped
** \fBNote:\fP this variable has no effect when the $$autoedit
** variable is \fIset\fP.
*/
- { "fcc_attach", DT_QUAD, R_NONE, &C_FccAttach, MUTT_YES },
+ { "fcc_attach", DT_QUAD, 0, &C_FccAttach, MUTT_YES },
/*
** .pp
** This variable controls whether or not attachments on outgoing messages
** are saved along with the main body of your message.
*/
- { "fcc_clear", DT_BOOL, R_NONE, &C_FccClear, false },
+ { "fcc_clear", DT_BOOL, 0, &C_FccClear, false },
/*
** .pp
** When this variable is \fIset\fP, FCCs will be stored unencrypted and
** signed.
** (PGP only)
*/
- { "flag_chars", DT_MBTABLE, R_INDEX|R_PAGER, &C_FlagChars, IP "*!DdrONon- " },
+ { "flag_chars", DT_MBTABLE|R_INDEX|R_PAGER, 0, &C_FlagChars, IP "*!DdrONon- " },
/*
** .pp
** Controls the characters used in several flags.
** .dt 11 .dd <space> .dd The mail is read - %Z expando.
** .de
*/
- { "flag_safe", DT_BOOL, R_NONE, &C_FlagSafe, false },
+ { "flag_safe", DT_BOOL, 0, &C_FlagSafe, false },
/*
** .pp
** If set, flagged messages can't be deleted.
*/
- { "folder", DT_PATH|DT_MAILBOX, R_NONE, &C_Folder, IP "~/Mail" },
+ { "folder", DT_PATH|DT_MAILBOX, 0, &C_Folder, IP "~/Mail" },
/*
** .pp
** Specifies the default location of your mailboxes. A "+" or "=" at the
** you use "+" or "=" for any other variables since expansion takes place
** when handling the "$mailboxes" command.
*/
- { "folder_format", DT_STRING|DT_NOT_EMPTY, R_MENU, &C_FolderFormat, IP "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %i" },
+ { "folder_format", DT_STRING|DT_NOT_EMPTY|R_MENU, 0, &C_FolderFormat, IP "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %i" },
/*
** .pp
** This variable allows you to customize the file browser display to your
** %m requires $$mail_check_stats to be set.
** %n requires $$mail_check_stats to be set (except for IMAP mailboxes).
*/
- { "followup_to", DT_BOOL, R_NONE, &C_FollowupTo, true },
+ { "followup_to", DT_BOOL, 0, &C_FollowupTo, true },
/*
** .pp
** Controls whether or not the "Mail-Followup-To:" header field is
** of the same email for you.
*/
#ifdef USE_NNTP
- { "followup_to_poster", DT_QUAD, R_NONE, &C_FollowupToPoster, MUTT_ASKYES },
+ { "followup_to_poster", DT_QUAD, 0, &C_FollowupToPoster, MUTT_ASKYES },
/*
** .pp
** If this variable is \fIset\fP and the keyword "poster" is present in
** message via mail.
*/
#endif
- { "force_name", DT_BOOL, R_NONE, &C_ForceName, false },
+ { "force_name", DT_BOOL, 0, &C_ForceName, false },
/*
** .pp
** This variable is similar to $$save_name, except that NeoMutt will
** .pp
** Also see the $$record variable.
*/
- { "forward_attachments", DT_QUAD, R_NONE, &C_ForwardAttachments, MUTT_ASKYES },
+ { "forward_attachments", DT_QUAD, 0, &C_ForwardAttachments, MUTT_ASKYES },
/*
** .pp
** When forwarding inline (i.e. $$mime_forward \fIunset\fP or
** to the newly composed message if this quadoption is \fIset\fP or
** answered with ``yes''.
*/
- { "forward_attribution_intro", DT_STRING, R_NONE, &C_ForwardAttributionIntro, IP "----- Forwarded message from %f -----" },
+ { "forward_attribution_intro", DT_STRING, 0, &C_ForwardAttributionIntro, IP "----- Forwarded message from %f -----" },
/*
** .pp
** This is the string that will precede a message which has been forwarded
** For a full listing of defined \fCprintf(3)\fP-like sequences see
** the section on $$index_format. See also $$attribution_locale.
*/
- { "forward_attribution_trailer", DT_STRING, R_NONE, &C_ForwardAttributionTrailer, IP "----- End forwarded message -----" },
+ { "forward_attribution_trailer", DT_STRING, 0, &C_ForwardAttributionTrailer, IP "----- End forwarded message -----" },
/*
** .pp
** This is the string that will follow a message which has been forwarded
** For a full listing of defined \fCprintf(3)\fP-like sequences see
** the section on $$index_format. See also $$attribution_locale.
*/
- { "forward_decode", DT_BOOL, R_NONE, &C_ForwardDecode, true },
+ { "forward_decode", DT_BOOL, 0, &C_ForwardDecode, true },
/*
** .pp
** Controls the decoding of complex MIME messages into \fCtext/plain\fP when
** This variable is only used, if $$mime_forward is \fIunset\fP,
** otherwise $$mime_forward_decode is used instead.
*/
- { "forward_decrypt", DT_BOOL, R_NONE, &C_ForwardDecrypt, true },
+ { "forward_decrypt", DT_BOOL, 0, &C_ForwardDecrypt, true },
/*
** .pp
** Controls the handling of encrypted messages when forwarding a message.
** $$mime_forward_decode is \fIunset\fP.
** (PGP only)
*/
- { "forward_edit", DT_QUAD, R_NONE, &C_ForwardEdit, MUTT_YES },
+ { "forward_edit", DT_QUAD, 0, &C_ForwardEdit, MUTT_YES },
/*
** .pp
** This quadoption controls whether or not the user is automatically
** placed in the editor when forwarding messages. For those who always want
** to forward with no modification, use a setting of "no".
*/
- { "forward_format", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_ForwardFormat, IP "[%a: %s]" },
+ { "forward_format", DT_STRING|DT_NOT_EMPTY, 0, &C_ForwardFormat, IP "[%a: %s]" },
/*
** .pp
** This variable controls the default subject when forwarding a message.
** It uses the same format sequences as the $$index_format variable.
*/
- { "forward_quote", DT_BOOL, R_NONE, &C_ForwardQuote, false },
+ { "forward_quote", DT_BOOL, 0, &C_ForwardQuote, false },
/*
** .pp
** When \fIset\fP, forwarded messages included in the main body of the
** message (when $$mime_forward is \fIunset\fP) will be quoted using
** $$indent_string.
*/
- { "forward_references", DT_BOOL, R_NONE, &C_ForwardReferences, false },
+ { "forward_references", DT_BOOL, 0, &C_ForwardReferences, false },
/*
** .pp
** When \fIset\fP, forwarded messages set the "In-Reply-To:" and
** forwarded message becomes part of the original thread instead of starting
** a new one.
*/
- { "from", DT_ADDRESS, R_NONE, &C_From, 0 },
+ { "from", DT_ADDRESS, 0, &C_From, 0 },
/*
** .pp
** When \fIset\fP, this variable contains a default "from" address. It
** .pp
** If not specified, then it may be read from the environment variable \fC$$$EMAIL\fP.
*/
- { "from_chars", DT_MBTABLE, R_INDEX|R_PAGER, &C_FromChars, 0 },
+ { "from_chars", DT_MBTABLE|R_INDEX|R_PAGER, 0, &C_FromChars, 0 },
/*
** .pp
** Controls the character used to prefix the %F and %L fields in the
** string variables; one can't tell a variable that is unset from one
** that is set to the empty string.
*/
- { "gecos_mask", DT_REGEX, R_NONE, &C_GecosMask, IP "^[^,]*" },
+ { "gecos_mask", DT_REGEX, 0, &C_GecosMask, IP "^[^,]*" },
/*
** .pp
** A regular expression used by NeoMutt to parse the GECOS field of a password
** "Franklin" to "Franklin, Steve".
*/
#ifdef USE_NNTP
- { "group_index_format", DT_STRING|DT_NOT_EMPTY, R_INDEX|R_PAGER, &C_GroupIndexFormat, IP "%4C %M%N %5s %-45.45f %d" },
+ { "group_index_format", DT_STRING|DT_NOT_EMPTY|R_INDEX|R_PAGER, 0, &C_GroupIndexFormat, IP "%4C %M%N %5s %-45.45f %d" },
/*
** .pp
** This variable allows you to customize the newsgroup browser display to
** .de
*/
#endif
- { "hdrs", DT_BOOL, R_NONE, &C_Hdrs, true },
+ { "hdrs", DT_BOOL, 0, &C_Hdrs, true },
/*
** .pp
** When \fIunset\fP, the header fields normally added by the "$my_hdr"
** composing a new message or replying in order to take effect. If \fIset\fP,
** the user defined header fields are added to every new message.
*/
- { "header", DT_BOOL, R_NONE, &C_Header, false },
+ { "header", DT_BOOL, 0, &C_Header, false },
/*
** .pp
** When \fIset\fP, this variable causes NeoMutt to include the header
** The $$weed setting applies.
*/
#ifdef USE_HCACHE
- { "header_cache", DT_PATH, R_NONE, &C_HeaderCache, 0 },
+ { "header_cache", DT_PATH, 0, &C_HeaderCache, 0 },
/*
** .pp
** This variable points to the header cache database.
** Header caching can greatly improve speed when opening POP, IMAP
** MH or Maildir folders, see "$caching" for details.
*/
- { "header_cache_backend", DT_STRING, R_NONE, &C_HeaderCacheBackend, 0, hcache_validator },
+ { "header_cache_backend", DT_STRING, 0, &C_HeaderCacheBackend, 0, hcache_validator },
/*
** .pp
** This variable specifies the header cache backend.
*/
#if defined(HAVE_QDBM) || defined(HAVE_TC) || defined(HAVE_KC)
- { "header_cache_compress", DT_BOOL, R_NONE, &C_HeaderCacheCompress, true },
+ { "header_cache_compress", DT_BOOL, 0, &C_HeaderCacheCompress, true },
/*
** .pp
** When NeoMutt is compiled with qdbm, tokyocabinet or kyotocabinet
*/
#endif /* HAVE_QDBM */
#if defined(HAVE_GDBM) || defined(HAVE_BDB)
- { "header_cache_pagesize", DT_STRING, R_NONE, &C_HeaderCachePagesize, IP "16384" },
+ { "header_cache_pagesize", DT_STRING, 0, &C_HeaderCachePagesize, IP "16384" },
/*
** .pp
** When NeoMutt is compiled with either gdbm or bdb4 as the header cache backend,
*/
#endif /* HAVE_GDBM || HAVE_BDB */
#endif /* USE_HCACHE */
- { "header_color_partial", DT_BOOL, R_PAGER_FLOW, &C_HeaderColorPartial, false },
+ { "header_color_partial", DT_BOOL|R_PAGER_FLOW, 0, &C_HeaderColorPartial, false },
/*
** .pp
** When \fIset\fP, color header regexes behave like color body regexes:
** .pp
** See "$color" for more details.
*/
- { "help", DT_BOOL, R_REFLOW, &C_Help, true },
+ { "help", DT_BOOL|R_REFLOW, 0, &C_Help, true },
/*
** .pp
** When \fIset\fP, help lines describing the bindings for the major functions
** running. Since this variable is primarily aimed at new users, neither
** of these should present a major problem.
*/
- { "hidden_host", DT_BOOL, R_NONE, &C_HiddenHost, false },
+ { "hidden_host", DT_BOOL, 0, &C_HiddenHost, false },
/*
** .pp
** When \fIset\fP, NeoMutt will skip the host name part of $$hostname variable
** affect the generation of Message-IDs, and it will not lead to the
** cut-off of first-level domains.
*/
- { "hidden_tags", DT_STRING, R_NONE, &C_HiddenTags, IP "unread,draft,flagged,passed,replied,attachment,signed,encrypted" },
+ { "hidden_tags", DT_STRING, 0, &C_HiddenTags, IP "unread,draft,flagged,passed,replied,attachment,signed,encrypted" },
/*
** .pp
** This variable specifies private notmuch/imap tags which should not be printed
** on screen.
*/
- { "hide_limited", DT_BOOL, R_TREE|R_INDEX, &C_HideLimited, false },
+ { "hide_limited", DT_BOOL|R_TREE|R_INDEX, 0, &C_HideLimited, false },
/*
** .pp
** When \fIset\fP, NeoMutt will not show the presence of messages that are hidden
** by limiting, in the thread tree.
*/
- { "hide_missing", DT_BOOL, R_TREE|R_INDEX, &C_HideMissing, true },
+ { "hide_missing", DT_BOOL|R_TREE|R_INDEX, 0, &C_HideMissing, true },
/*
** .pp
** When \fIset\fP, NeoMutt will not show the presence of missing messages in the
** thread tree.
*/
- { "hide_thread_subject", DT_BOOL, R_TREE|R_INDEX, &C_HideThreadSubject, true },
+ { "hide_thread_subject", DT_BOOL|R_TREE|R_INDEX, 0, &C_HideThreadSubject, true },
/*
** .pp
** When \fIset\fP, NeoMutt will not show the subject of messages in the thread
** tree that have the same subject as their parent or closest previously
** displayed sibling.
*/
- { "hide_top_limited", DT_BOOL, R_TREE|R_INDEX, &C_HideTopLimited, false },
+ { "hide_top_limited", DT_BOOL|R_TREE|R_INDEX, 0, &C_HideTopLimited, false },
/*
** .pp
** When \fIset\fP, NeoMutt will not show the presence of messages that are hidden
** by limiting, at the top of threads in the thread tree. Note that when
** $$hide_limited is \fIset\fP, this option will have no effect.
*/
- { "hide_top_missing", DT_BOOL, R_TREE|R_INDEX, &C_HideTopMissing, true },
+ { "hide_top_missing", DT_BOOL|R_TREE|R_INDEX, 0, &C_HideTopMissing, true },
/*
** .pp
** When \fIset\fP, NeoMutt will not show the presence of missing messages at the
** top of threads in the thread tree. Note that when $$hide_missing is
** \fIset\fP, this option will have no effect.
*/
- { "history", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_History, 10 },
+ { "history", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_History, 10 },
/*
** .pp
** This variable controls the size (in number of strings remembered) of
** the string history buffer per category. The buffer is cleared each time the
** variable is set.
*/
- { "history_file", DT_PATH, R_NONE, &C_HistoryFile, IP "~/.mutthistory" },
+ { "history_file", DT_PATH, 0, &C_HistoryFile, IP "~/.mutthistory" },
/*
** .pp
** The file in which NeoMutt will save its history.
** .pp
** Also see $$save_history.
*/
- { "history_remove_dups", DT_BOOL, R_NONE, &C_HistoryRemoveDups, false },
+ { "history_remove_dups", DT_BOOL, 0, &C_HistoryRemoveDups, false },
/*
** .pp
** When \fIset\fP, all of the string history will be scanned for duplicates
** when a new entry is added. Duplicate entries in the $$history_file will
** also be removed when it is periodically compacted.
*/
- { "honor_disposition", DT_BOOL, R_NONE, &C_HonorDisposition, false },
+ { "honor_disposition", DT_BOOL, 0, &C_HonorDisposition, false },
/*
** .pp
** When \fIset\fP, NeoMutt will not display attachments with a
** If \fIunset\fP, NeoMutt will render all MIME parts it can
** properly transform to plain text.
*/
- { "honor_followup_to", DT_QUAD, R_NONE, &C_HonorFollowupTo, MUTT_YES },
+ { "honor_followup_to", DT_QUAD, 0, &C_HonorFollowupTo, MUTT_YES },
/*
** .pp
** This variable controls whether or not a Mail-Followup-To header is
** honored when group-replying to a message.
*/
- { "hostname", DT_STRING, R_NONE, &C_Hostname, 0 },
+ { "hostname", DT_STRING, 0, &C_Hostname, 0 },
/*
** .pp
** Specifies the fully-qualified hostname of the system NeoMutt is running on
** Also see $$use_domain and $$hidden_host.
*/
#ifdef HAVE_LIBIDN
- { "idn_decode", DT_BOOL, R_MENU, &C_IdnDecode, true },
+ { "idn_decode", DT_BOOL|R_MENU, 0, &C_IdnDecode, true },
/*
** .pp
** When \fIset\fP, NeoMutt will show you international domain names decoded.
** Note: You can use IDNs for addresses even if this is \fIunset\fP.
** This variable only affects decoding. (IDN only)
*/
- { "idn_encode", DT_BOOL, R_MENU, &C_IdnEncode, true },
+ { "idn_encode", DT_BOOL|R_MENU, 0, &C_IdnEncode, true },
/*
** .pp
** When \fIset\fP, NeoMutt will encode international domain names using
** UTF-8 encoded domains. (IDN only)
*/
#endif /* HAVE_LIBIDN */
- { "ignore_list_reply_to", DT_BOOL, R_NONE, &C_IgnoreListReplyTo, false },
+ { "ignore_list_reply_to", DT_BOOL, 0, &C_IgnoreListReplyTo, false },
/*
** .pp
** Affects the behavior of the \fC<reply>\fP function when replying to
** list.
*/
#ifdef USE_IMAP
- { "imap_authenticators", DT_STRING, R_NONE, &C_ImapAuthenticators, 0 },
+ { "imap_authenticators", DT_STRING, 0, &C_ImapAuthenticators, 0 },
/*
** .pp
** This is a colon-delimited list of authentication methods NeoMutt may
** the previous methods are unavailable. If a method is available but
** authentication fails, NeoMutt will not connect to the IMAP server.
*/
- { "imap_check_subscribed", DT_BOOL, R_NONE, &C_ImapCheckSubscribed, false },
+ { "imap_check_subscribed", DT_BOOL, 0, &C_ImapCheckSubscribed, false },
/*
** .pp
** When \fIset\fP, NeoMutt will fetch the set of subscribed folders from
** of mailboxes it polls for new mail just as if you had issued individual
** "$mailboxes" commands.
*/
- { "imap_condstore", DT_BOOL, R_NONE, &C_ImapCondstore, false },
+ { "imap_condstore", DT_BOOL, 0, &C_ImapCondstore, false },
/*
** .pp
** When \fIset\fP, mutt will use the CONDSTORE extension (RFC 7162)
** those, and displays worse performance when enabled. Your
** mileage may vary.
*/
- { "imap_delim_chars", DT_STRING, R_NONE, &C_ImapDelimChars, IP "/." },
+ { "imap_delim_chars", DT_STRING, 0, &C_ImapDelimChars, IP "/." },
/*
** .pp
** This contains the list of characters which you would like to treat
** as folder separators for displaying IMAP paths. In particular it
** helps in using the "=" shortcut for your \fIfolder\fP variable.
*/
- { "imap_fetch_chunk_size", DT_LONG, R_NONE, &C_ImapFetchChunkSize, 0 },
+ { "imap_fetch_chunk_size", DT_LONG, 0, &C_ImapFetchChunkSize, 0 },
/*
** .pp
** When set to a value greater than 0, new headers will be downloaded
** a FETCH per set of this size instead of a single FETCH for all new
** headers.
*/
- { "imap_headers", DT_STRING, R_INDEX, &C_ImapHeaders, 0 },
+ { "imap_headers", DT_STRING|R_INDEX, 0, &C_ImapHeaders, 0 },
/*
** .pp
** NeoMutt requests these header fields in addition to the default headers
** and not contain the colon, e.g. "X-BOGOSITY X-SPAM-STATUS" for the
** "X-Bogosity:" and "X-Spam-Status:" header fields.
*/
- { "imap_idle", DT_BOOL, R_NONE, &C_ImapIdle, false },
+ { "imap_idle", DT_BOOL, 0, &C_ImapIdle, false },
/*
** .pp
** When \fIset\fP, NeoMutt will attempt to use the IMAP IDLE extension
** to NeoMutt's implementation. If your connection seems to freeze
** up periodically, try unsetting this.
*/
- { "imap_keepalive", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_ImapKeepalive, 300 },
+ { "imap_keepalive", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_ImapKeepalive, 300 },
/*
** .pp
** This variable specifies the maximum amount of time in seconds that NeoMutt
** violated every now and then. Reduce this number if you find yourself
** getting disconnected from your IMAP server due to inactivity.
*/
- { "imap_list_subscribed", DT_BOOL, R_NONE, &C_ImapListSubscribed, false },
+ { "imap_list_subscribed", DT_BOOL, 0, &C_ImapListSubscribed, false },
/*
** .pp
** This variable configures whether IMAP folder browsing will look for
** only subscribed folders or all folders. This can be toggled in the
** IMAP browser with the \fC<toggle-subscribed>\fP function.
*/
- { "imap_login", DT_STRING|DT_SENSITIVE, R_NONE, &C_ImapLogin, 0 },
+ { "imap_login", DT_STRING|DT_SENSITIVE, 0, &C_ImapLogin, 0 },
/*
** .pp
** Your login name on the IMAP server.
** .pp
** This variable defaults to the value of $$imap_user.
*/
- { "imap_oauth_refresh_command", DT_STRING|DT_SENSITIVE, R_NONE, &C_ImapOauthRefreshCommand, 0 },
+ { "imap_oauth_refresh_command", DT_STRING|DT_SENSITIVE, 0, &C_ImapOauthRefreshCommand, 0 },
/*
** .pp
** The command to run to generate an OAUTH refresh token for
** run on every connection attempt that uses the OAUTHBEARER authentication
** mechanism. See "$oauth" for details.
*/
- { "imap_pass", DT_STRING|DT_SENSITIVE, R_NONE, &C_ImapPass, 0 },
+ { "imap_pass", DT_STRING|DT_SENSITIVE, 0, &C_ImapPass, 0 },
/*
** .pp
** Specifies the password for your IMAP account. If \fIunset\fP, NeoMutt will
** fairly secure machine, because the superuser can read your neomuttrc even
** if you are the only one who can read the file.
*/
- { "imap_passive", DT_BOOL, R_NONE, &C_ImapPassive, true },
+ { "imap_passive", DT_BOOL, 0, &C_ImapPassive, true },
/*
** .pp
** When \fIset\fP, NeoMutt will not open new IMAP connections to check for new
** user/password pairs on NeoMutt invocation, or if opening the connection
** is slow.
*/
- { "imap_peek", DT_BOOL, R_NONE, &C_ImapPeek, true },
+ { "imap_peek", DT_BOOL, 0, &C_ImapPeek, true },
/*
** .pp
** When \fIset\fP, NeoMutt will avoid implicitly marking your mail as read whenever
** but can make closing an IMAP folder somewhat slower. This option
** exists to appease speed freaks.
*/
- { "imap_pipeline_depth", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_ImapPipelineDepth, 15 },
+ { "imap_pipeline_depth", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_ImapPipelineDepth, 15 },
/*
** .pp
** Controls the number of IMAP commands that may be queued up before they
** .pp
** \fBNote:\fP Changes to this variable have no effect on open connections.
*/
- { "imap_poll_timeout", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_ImapPollTimeout, 15 },
+ { "imap_poll_timeout", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_ImapPollTimeout, 15 },
/*
** .pp
** This variable specifies the maximum amount of time in seconds
** for new mail, before timing out and closing the connection. Set
** to 0 to disable timing out.
*/
- { "imap_qresync", DT_BOOL, R_NONE, &C_ImapQresync, false },
+ { "imap_qresync", DT_BOOL, 0, &C_ImapQresync, false },
/*
** .pp
** When \fIset\fP, mutt will use the QRESYNC extension (RFC 7162)
** strange behavior, such as duplicate or missing messages please
** file a bug report to let us know.
*/
- { "imap_rfc5161", DT_BOOL, R_NONE, &C_ImapRfc5161, true },
+ { "imap_rfc5161", DT_BOOL, 0, &C_ImapRfc5161, true },
/*
** .pp
** When \fIset\fP, NeoMutt will use the IMAP ENABLE extension (RFC 5161) to
** If your connection seems to freeze at login, try unsetting this. See also
** https://github.com/neomutt/neomutt/issues/1689
*/
- { "imap_servernoise", DT_BOOL, R_NONE, &C_ImapServernoise, true },
+ { "imap_servernoise", DT_BOOL, 0, &C_ImapServernoise, true },
/*
** .pp
** When \fIset\fP, NeoMutt will display warning messages from the IMAP
** server which are out of the users' hands, you may wish to suppress
** them at some point.
*/
- { "imap_user", DT_STRING|DT_SENSITIVE, R_NONE, &C_ImapUser, 0 },
+ { "imap_user", DT_STRING|DT_SENSITIVE, 0, &C_ImapUser, 0 },
/*
** .pp
** The name of the user whose mail you intend to access on the IMAP
** This variable defaults to your user name on the local machine.
*/
#endif
- { "implicit_autoview", DT_BOOL, R_NONE, &C_ImplicitAutoview, false },
+ { "implicit_autoview", DT_BOOL, 0, &C_ImplicitAutoview, false },
/*
** .pp
** If set to "yes", NeoMutt will look for a mailcap entry with the
** use the viewer defined in that entry to convert the body part to text
** form.
*/
- { "include", DT_QUAD, R_NONE, &C_Include, MUTT_ASKYES },
+ { "include", DT_QUAD, 0, &C_Include, MUTT_ASKYES },
/*
** .pp
** Controls whether or not a copy of the message(s) you are replying to
** is included in your reply.
*/
- { "include_encrypted", DT_BOOL, R_NONE, &C_IncludeEncrypted, false },
+ { "include_encrypted", DT_BOOL, 0, &C_IncludeEncrypted, false },
/*
** .pp
** Controls whether or not Mutt includes separately encrypted attachment
** were attached by the attacker, they could trick an unwary recipient into
** decrypting and including the message in their reply.
*/
- { "include_onlyfirst", DT_BOOL, R_NONE, &C_IncludeOnlyfirst, false },
+ { "include_onlyfirst", DT_BOOL, 0, &C_IncludeOnlyfirst, false },
/*
** .pp
** Controls whether or not NeoMutt includes only the first attachment
** of the message you are replying.
*/
- { "indent_string", DT_STRING, R_NONE, &C_IndentString, IP "> " },
+ { "indent_string", DT_STRING, 0, &C_IndentString, IP "> " },
/*
** .pp
** Specifies the string to prepend to each line of text quoted in a
** This option is a format string, please see the description of
** $$index_format for supported \fCprintf(3)\fP-style sequences.
*/
- { "index_format", DT_STRING|DT_NOT_EMPTY, R_INDEX|R_PAGER, &C_IndexFormat, IP "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" },
+ { "index_format", DT_STRING|DT_NOT_EMPTY|R_INDEX|R_PAGER, 0, &C_IndexFormat, IP "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" },
/*
** .pp
** This variable allows you to customize the message index display to
** ``$save-hook'', ``$fcc-hook'' and ``$fcc-save-hook'', too.
*/
#ifdef USE_NNTP
- { "inews", DT_COMMAND, R_NONE, &C_Inews, 0 },
+ { "inews", DT_COMMAND, 0, &C_Inews, 0 },
/*
** .pp
** If set, specifies the program and arguments used to deliver news posted
** .te
*/
#endif
- { "ispell", DT_COMMAND, R_NONE, &C_Ispell, IP ISPELL },
+ { "ispell", DT_COMMAND, 0, &C_Ispell, IP ISPELL },
/*
** .pp
** How to invoke ispell (GNU's spell-checking software).
*/
- { "keep_flagged", DT_BOOL, R_NONE, &C_KeepFlagged, false },
+ { "keep_flagged", DT_BOOL, 0, &C_KeepFlagged, false },
/*
** .pp
** If \fIset\fP, read messages marked as flagged will not be moved
** from your spool mailbox to your $$mbox mailbox, or as a result of
** a "$mbox-hook" command.
*/
- { "mail_check", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_MailCheck, 5 },
+ { "mail_check", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_MailCheck, 5 },
/*
** .pp
** This variable configures how often (in seconds) NeoMutt should look for
** new mail. Also see the $$timeout variable.
*/
- { "mail_check_recent", DT_BOOL, R_NONE, &C_MailCheckRecent, true },
+ { "mail_check_recent", DT_BOOL, 0, &C_MailCheckRecent, true },
/*
** .pp
** When \fIset\fP, NeoMutt will only notify you about new mail that has been received
** When \fI$$mark_old\fP is set, NeoMutt does not consider the mailbox to contain new
** mail if only old messages exist.
*/
- { "mail_check_stats", DT_BOOL, R_NONE, &C_MailCheckStats, false },
+ { "mail_check_stats", DT_BOOL, 0, &C_MailCheckStats, false },
/*
** .pp
** When \fIset\fP, NeoMutt will periodically calculate message
** Message statistics can also be explicitly calculated by invoking the
** \fC<check-stats>\fP function.
*/
- { "mail_check_stats_interval", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_MailCheckStatsInterval, 60 },
+ { "mail_check_stats_interval", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_MailCheckStatsInterval, 60 },
/*
** .pp
** When $$mail_check_stats is \fIset\fP, this variable configures
** how often (in seconds) NeoMutt will update message counts.
*/
- { "mailcap_path", DT_STRING, R_NONE, &C_MailcapPath, IP "~/.mailcap:" PKGDATADIR "/mailcap:" SYSCONFDIR "/mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap" },
+ { "mailcap_path", DT_STRING, 0, &C_MailcapPath, IP "~/.mailcap:" PKGDATADIR "/mailcap:" SYSCONFDIR "/mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap" },
/*
** .pp
** This variable specifies which files to consult when attempting to
** .pp
** The default search path is from RFC1524.
*/
- { "mailcap_sanitize", DT_BOOL, R_NONE, &C_MailcapSanitize, true },
+ { "mailcap_sanitize", DT_BOOL, 0, &C_MailcapSanitize, true },
/*
** .pp
** If \fIset\fP, NeoMutt will restrict possible characters in mailcap % expandos
** \fBDON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
** DOING!\fP
*/
- { "maildir_check_cur", DT_BOOL, R_NONE, &C_MaildirCheckCur, false },
+ { "maildir_check_cur", DT_BOOL, 0, &C_MaildirCheckCur, false },
/*
** .pp
** If \fIset\fP, NeoMutt will poll both the new and cur directories of
** to scan all cur messages.
*/
#ifdef USE_HCACHE
- { "maildir_header_cache_verify", DT_BOOL, R_NONE, &C_MaildirHeaderCacheVerify, true },
+ { "maildir_header_cache_verify", DT_BOOL, 0, &C_MaildirHeaderCacheVerify, true },
/*
** .pp
** Check for Maildir unaware programs other than NeoMutt having modified maildir
** folders).
*/
#endif
- { "maildir_trash", DT_BOOL, R_NONE, &C_MaildirTrash, false },
+ { "maildir_trash", DT_BOOL, 0, &C_MaildirTrash, false },
/*
** .pp
** If \fIset\fP, messages marked as deleted will be saved with the maildir
** to maildir-style mailboxes. Setting it will have no effect on other
** mailbox types.
*/
- { "mark_macro_prefix", DT_STRING, R_NONE, &C_MarkMacroPrefix, IP "'" },
+ { "mark_macro_prefix", DT_STRING, 0, &C_MarkMacroPrefix, IP "'" },
/*
** .pp
** Prefix for macros created using mark-message. A new macro
** automatically generated with \fI<mark-message>a\fP will be composed
** from this prefix and the letter \fIa\fP.
*/
- { "mark_old", DT_BOOL, R_INDEX|R_PAGER, &C_MarkOld, true },
+ { "mark_old", DT_BOOL|R_INDEX|R_PAGER, 0, &C_MarkOld, true },
/*
** .pp
** Controls whether or not NeoMutt marks \fInew\fP \fBunread\fP
** will show up with an "O" next to them in the index menu,
** indicating that they are old.
*/
- { "markers", DT_BOOL, R_PAGER_FLOW, &C_Markers, true },
+ { "markers", DT_BOOL|R_PAGER_FLOW, 0, &C_Markers, true },
/*
** .pp
** Controls the display of wrapped lines in the internal pager. If set, a
** .pp
** Also see the $$smart_wrap variable.
*/
- { "mask", DT_REGEX|DT_REGEX_MATCH_CASE|DT_REGEX_ALLOW_NOT|DT_REGEX_NOSUB, R_NONE, &C_Mask, IP "!^\\.[^.]" },
+ { "mask", DT_REGEX|DT_REGEX_MATCH_CASE|DT_REGEX_ALLOW_NOT|DT_REGEX_NOSUB, 0, &C_Mask, IP "!^\\.[^.]" },
/*
** .pp
** A regular expression used in the file browser, optionally preceded by
** the \fInot\fP operator "!". Only files whose names match this mask
** will be shown. The match is always case-sensitive.
*/
- { "mbox", DT_PATH|DT_MAILBOX, R_INDEX|R_PAGER, &C_Mbox, IP "~/mbox" },
+ { "mbox", DT_PATH|DT_MAILBOX|R_INDEX|R_PAGER, 0, &C_Mbox, IP "~/mbox" },
/*
** .pp
** This specifies the folder into which read mail in your $$spoolfile
** .pp
** Also see the $$move variable.
*/
- { "mbox_type", DT_MAGIC, R_NONE, &C_MboxType, MUTT_MBOX },
+ { "mbox_type", DT_MAGIC, 0, &C_MboxType, MUTT_MBOX },
/*
** .pp
** The default mailbox type used when creating new folders. May be any of
** .pp
** This can also be set using the \fC-m\fP command-line option.
*/
- { "menu_context", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_MenuContext, 0 },
+ { "menu_context", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_MenuContext, 0 },
/*
** .pp
** This variable controls the number of lines of context that are given
** when scrolling through menus. (Similar to $$pager_context.)
*/
- { "menu_move_off", DT_BOOL, R_NONE, &C_MenuMoveOff, true },
+ { "menu_move_off", DT_BOOL, 0, &C_MenuMoveOff, true },
/*
** .pp
** When \fIunset\fP, the bottom entry of menus will never scroll up past
** the bottom of the screen, unless there are less entries than lines.
** When \fIset\fP, the bottom entry may move off the bottom.
*/
- { "menu_scroll", DT_BOOL, R_NONE, &C_MenuScroll, false },
+ { "menu_scroll", DT_BOOL, 0, &C_MenuScroll, false },
/*
** .pp
** When \fIset\fP, menus will be scrolled up or down one line when you
** (useful for slow links to avoid many redraws).
*/
#if defined(USE_IMAP) || defined(USE_POP)
- { "message_cache_clean", DT_BOOL, R_NONE, &C_MessageCacheClean, false },
+ { "message_cache_clean", DT_BOOL, 0, &C_MessageCacheClean, false },
/*
** .pp
** If \fIset\fP, NeoMutt will clean out obsolete entries from the message cache when
** every once in a while, since it can be a little slow
** (especially for large folders).
*/
- { "message_cachedir", DT_PATH, R_NONE, &C_MessageCachedir, 0 },
+ { "message_cachedir", DT_PATH, 0, &C_MessageCachedir, 0 },
/*
** .pp
** Set this to a directory and NeoMutt will cache copies of messages from
** Also see the $$message_cache_clean variable.
*/
#endif
- { "message_format", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_MessageFormat, IP "%s" },
+ { "message_format", DT_STRING|DT_NOT_EMPTY, 0, &C_MessageFormat, IP "%s" },
/*
** .pp
** This is the string displayed in the "attachment" menu for
** attachments of type \fCmessage/rfc822\fP. For a full listing of defined
** \fCprintf(3)\fP-like sequences see the section on $$index_format.
*/
- { "meta_key", DT_BOOL, R_NONE, &C_MetaKey, false },
+ { "meta_key", DT_BOOL, 0, &C_MetaKey, false },
/*
** .pp
** If \fIset\fP, forces NeoMutt to interpret keystrokes with the high bit (bit 8)
** high bit from \fC0xf8\fP is \fC0x78\fP, which is the ASCII character
** "x".
*/
- { "metoo", DT_BOOL, R_NONE, &C_Metoo, false },
+ { "metoo", DT_BOOL, 0, &C_Metoo, false },
/*
** .pp
** If \fIunset\fP, NeoMutt will remove your address (see the "$alternates"
** command) from the list of recipients when replying to a message.
*/
- { "mh_purge", DT_BOOL, R_NONE, &C_MhPurge, false },
+ { "mh_purge", DT_BOOL, 0, &C_MhPurge, false },
/*
** .pp
** When \fIunset\fP, NeoMutt will mimic mh's behavior and rename deleted messages
** .pp
** This option is similar to $$maildir_trash for Maildir folders.
*/
- { "mh_seq_flagged", DT_STRING, R_NONE, &C_MhSeqFlagged, IP "flagged" },
+ { "mh_seq_flagged", DT_STRING, 0, &C_MhSeqFlagged, IP "flagged" },
/*
** .pp
** The name of the MH sequence used for flagged messages.
*/
- { "mh_seq_replied", DT_STRING, R_NONE, &C_MhSeqReplied, IP "replied" },
+ { "mh_seq_replied", DT_STRING, 0, &C_MhSeqReplied, IP "replied" },
/*
** .pp
** The name of the MH sequence used to tag replied messages.
*/
- { "mh_seq_unseen", DT_STRING, R_NONE, &C_MhSeqUnseen, IP "unseen" },
+ { "mh_seq_unseen", DT_STRING, 0, &C_MhSeqUnseen, IP "unseen" },
/*
** .pp
** The name of the MH sequence used for unseen messages.
*/
- { "mime_forward", DT_QUAD, R_NONE, &C_MimeForward, MUTT_NO },
+ { "mime_forward", DT_QUAD, 0, &C_MimeForward, MUTT_NO },
/*
** .pp
** When \fIset\fP, the message you are forwarding will be attached as a
** .pp
** Also see $$forward_decode and $$mime_forward_decode.
*/
- { "mime_forward_decode", DT_BOOL, R_NONE, &C_MimeForwardDecode, false },
+ { "mime_forward_decode", DT_BOOL, 0, &C_MimeForwardDecode, false },
/*
** .pp
** Controls the decoding of complex MIME messages into \fCtext/plain\fP when
** forwarding a message while $$mime_forward is \fIset\fP. Otherwise
** $$forward_decode is used instead.
*/
- { "mime_forward_rest", DT_QUAD, R_NONE, &C_MimeForwardRest, MUTT_YES },
+ { "mime_forward_rest", DT_QUAD, 0, &C_MimeForwardRest, MUTT_YES },
/*
** .pp
** When forwarding multiple attachments of a MIME message from the attachment
** be attached to the newly composed message if this option is \fIset\fP.
*/
#ifdef USE_NNTP
- { "mime_subject", DT_BOOL, R_NONE, &C_MimeSubject, true },
+ { "mime_subject", DT_BOOL, 0, &C_MimeSubject, true },
/*
** .pp
** If \fIunset\fP, 8-bit "subject:" line in article header will not be
** is Usenet article, because MIME for news is nonstandard feature.
*/
#endif
- { "mime_type_query_command", DT_COMMAND, R_NONE, &C_MimeTypeQueryCommand, 0 },
+ { "mime_type_query_command", DT_COMMAND, 0, &C_MimeTypeQueryCommand, 0 },
/*
** .pp
** This specifies a command to run, to determine the mime type of a
** Suggested values are "xdg-mime query filetype" or
** "file -bi".
*/
- { "mime_type_query_first", DT_BOOL, R_NONE, &C_MimeTypeQueryFirst, false },
+ { "mime_type_query_first", DT_BOOL, 0, &C_MimeTypeQueryFirst, false },
/*
** .pp
** When \fIset\fP, the $$mime_type_query_command will be run before the
** mime.types lookup.
*/
#ifdef MIXMASTER
- { "mix_entry_format", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_MixEntryFormat, IP "%4n %c %-16s %a" },
+ { "mix_entry_format", DT_STRING|DT_NOT_EMPTY, 0, &C_MixEntryFormat, IP "%4n %c %-16s %a" },
/*
** .pp
** This variable describes the format of a remailer line on the mixmaster
** .dt %s .dd The remailer's short name
** .de
*/
- { "mixmaster", DT_COMMAND, R_NONE, &C_Mixmaster, IP MIXMASTER },
+ { "mixmaster", DT_COMMAND, 0, &C_Mixmaster, IP MIXMASTER },
/*
** .pp
** This variable contains the path to the Mixmaster binary on your
** mixmaster chain.
*/
#endif
- { "move", DT_QUAD, R_NONE, &C_Move, MUTT_NO },
+ { "move", DT_QUAD, 0, &C_Move, MUTT_NO },
/*
** .pp
** Controls whether or not NeoMutt will move read messages
** from your spool mailbox to your $$mbox mailbox, or as a result of
** a "$mbox-hook" command.
*/
- { "narrow_tree", DT_BOOL, R_TREE|R_INDEX, &C_NarrowTree, false },
+ { "narrow_tree", DT_BOOL|R_TREE|R_INDEX, 0, &C_NarrowTree, false },
/*
** .pp
** This variable, when \fIset\fP, makes the thread tree narrower, allowing
** deeper threads to fit on the screen.
*/
#ifdef USE_SOCKET
- { "net_inc", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_NetInc, 10 },
+ { "net_inc", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_NetInc, 10 },
/*
** .pp
** Operations that expect to transfer a large amount of data over the
** See also $$read_inc, $$write_inc and $$net_inc.
*/
#endif
- { "new_mail_command", DT_COMMAND, R_NONE, &C_NewMailCommand, 0 },
+ { "new_mail_command", DT_COMMAND, 0, &C_NewMailCommand, 0 },
/*
** .pp
** If \fIset\fP, NeoMutt will call this command after a new message is received.
** into this command.
*/
#ifdef USE_NNTP
- { "news_cache_dir", DT_PATH, R_NONE, &C_NewsCacheDir, IP "~/.neomutt" },
+ { "news_cache_dir", DT_PATH, 0, &C_NewsCacheDir, IP "~/.neomutt" },
/*
** .pp
** This variable pointing to directory where NeoMutt will save cached news
** articles and headers in. If \fIunset\fP, articles and headers will not be
** saved at all and will be reloaded from the server each time.
*/
- { "news_server", DT_STRING, R_NONE, &C_NewsServer, 0 },
+ { "news_server", DT_STRING, 0, &C_NewsServer, 0 },
/*
** .pp
** This variable specifies domain name or address of NNTP server.
** environment variable \fC$$$NNTPSERVER\fP, or putting the server name in the
** file "/etc/nntpserver".
*/
- { "newsgroups_charset", DT_STRING, R_NONE, &C_NewsgroupsCharset, IP "utf-8", charset_validator },
+ { "newsgroups_charset", DT_STRING, 0, &C_NewsgroupsCharset, IP "utf-8", charset_validator },
/*
** .pp
** Character set of newsgroups descriptions.
*/
- { "newsrc", DT_PATH, R_NONE, &C_Newsrc, IP "~/.newsrc" },
+ { "newsrc", DT_PATH, 0, &C_Newsrc, IP "~/.newsrc" },
/*
** .pp
** The file, containing info about subscribed newsgroups - names and
*/
#endif
#ifdef USE_NOTMUCH
- { "nm_db_limit", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_NmDbLimit, 0 },
+ { "nm_db_limit", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_NmDbLimit, 0 },
/*
** .pp
** This variable specifies the default limit used in notmuch queries.
*/
- { "nm_default_uri", DT_STRING, R_NONE, &C_NmDefaultUri, 0 },
+ { "nm_default_uri", DT_STRING, 0, &C_NmDefaultUri, 0 },
/*
** .pp
** This variable specifies the default Notmuch database in format
** notmuch://<absolute path>.
*/
- { "nm_exclude_tags", DT_STRING, R_NONE, &C_NmExcludeTags, 0 },
+ { "nm_exclude_tags", DT_STRING, 0, &C_NmExcludeTags, 0 },
/*
** .pp
** The messages tagged with these tags are excluded and not loaded
** from notmuch DB to NeoMutt unless specified explicitly.
*/
- { "nm_flagged_tag", DT_STRING, R_NONE, &C_NmFlaggedTag, IP "flagged" },
+ { "nm_flagged_tag", DT_STRING, 0, &C_NmFlaggedTag, IP "flagged" },
/*
** .pp
** This variable specifies notmuch tag which is used for flagged messages. The
** variable is used to count flagged messages in DB and set the flagged flag when
** modifying tags. All other NeoMutt commands use standard (e.g. maildir) flags.
*/
- { "nm_open_timeout", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_NmOpenTimeout, 5 },
+ { "nm_open_timeout", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_NmOpenTimeout, 5 },
/*
** .pp
** This variable specifies the timeout for database open in seconds.
*/
- { "nm_query_type", DT_STRING, R_NONE, &C_NmQueryType, IP "messages" },
+ { "nm_query_type", DT_STRING, 0, &C_NmQueryType, IP "messages" },
/*
** .pp
** This variable specifies the default query type (threads or messages) used in notmuch queries.
*/
- { "nm_query_window_current_position", DT_NUMBER, R_NONE, &C_NmQueryWindowCurrentPosition, 0 },
+ { "nm_query_window_current_position", DT_NUMBER, 0, &C_NmQueryWindowCurrentPosition, 0 },
/*
** .pp
** This variable contains the position of the current search for window based vfolder.
*/
- { "nm_query_window_current_search", DT_STRING, R_NONE, &C_NmQueryWindowCurrentSearch, 0 },
+ { "nm_query_window_current_search", DT_STRING, 0, &C_NmQueryWindowCurrentSearch, 0 },
/*
** .pp
** This variable contains the currently setup notmuch search for window based vfolder.
*/
- { "nm_query_window_duration", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_NmQueryWindowDuration, 0 },
+ { "nm_query_window_duration", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_NmQueryWindowDuration, 0 },
/*
** .pp
** This variable sets the time duration of a windowed notmuch query.
** Accepted values all non negative integers. A value of 0 disables the feature.
*/
- { "nm_query_window_timebase", DT_STRING, R_NONE, &C_NmQueryWindowTimebase, IP "week" },
+ { "nm_query_window_timebase", DT_STRING, 0, &C_NmQueryWindowTimebase, IP "week" },
/*
** .pp
** This variable sets the time base of a windowed notmuch query.
** Accepted values are 'minute', 'hour', 'day', 'week', 'month', 'year'
*/
- { "nm_record", DT_BOOL, R_NONE, &C_NmRecord, false },
+ { "nm_record", DT_BOOL, 0, &C_NmRecord, false },
/*
** .pp
** This variable specifies if the NeoMutt record should indexed by notmuch.
*/
- { "nm_record_tags", DT_STRING, R_NONE, &C_NmRecordTags, 0 },
+ { "nm_record_tags", DT_STRING, 0, &C_NmRecordTags, 0 },
/*
** .pp
** This variable specifies the default tags applied to messages stored to the NeoMutt record.
** When set to 0 this variable disable the window feature.
*/
- { "nm_replied_tag", DT_STRING, R_NONE, &C_NmRepliedTag, IP "replied" },
+ { "nm_replied_tag", DT_STRING, 0, &C_NmRepliedTag, IP "replied" },
/*
** .pp
** This variable specifies notmuch tag which is used for replied messages. The
** variable is used to set the replied flag when modifiying tags. All other NeoMutt
** commands use standard (e.g. maildir) flags.
*/
- { "nm_unread_tag", DT_STRING, R_NONE, &C_NmUnreadTag, IP "unread" },
+ { "nm_unread_tag", DT_STRING, 0, &C_NmUnreadTag, IP "unread" },
/*
** .pp
** This variable specifies notmuch tag which is used for unread messages. The
*/
#endif
#ifdef USE_NNTP
- { "nntp_authenticators", DT_STRING, R_NONE, &C_NntpAuthenticators, 0 },
+ { "nntp_authenticators", DT_STRING, 0, &C_NntpAuthenticators, 0 },
/*
** .pp
** This is a colon-delimited list of authentication methods NeoMutt may
** the previous methods are unavailable. If a method is available but
** authentication fails, NeoMutt will not connect to the IMAP server.
*/
- { "nntp_context", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_NntpContext, 1000 },
+ { "nntp_context", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_NntpContext, 1000 },
/*
** .pp
** This variable defines number of articles which will be in index when
** number, oldest articles will be ignored. Also controls how many
** articles headers will be saved in cache when you quit newsgroup.
*/
- { "nntp_listgroup", DT_BOOL, R_NONE, &C_NntpListgroup, true },
+ { "nntp_listgroup", DT_BOOL, 0, &C_NntpListgroup, true },
/*
** .pp
** This variable controls whether or not existence of each article is
** checked when newsgroup is entered.
*/
- { "nntp_load_description", DT_BOOL, R_NONE, &C_NntpLoadDescription, true },
+ { "nntp_load_description", DT_BOOL, 0, &C_NntpLoadDescription, true },
/*
** .pp
** This variable controls whether or not descriptions for each newsgroup
** must be loaded when newsgroup is added to list (first time list
** loading or new newsgroup adding).
*/
- { "nntp_pass", DT_STRING|DT_SENSITIVE, R_NONE, &C_NntpPass, 0 },
+ { "nntp_pass", DT_STRING|DT_SENSITIVE, 0, &C_NntpPass, 0 },
/*
** .pp
** Your password for NNTP account.
*/
- { "nntp_poll", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_NntpPoll, 60 },
+ { "nntp_poll", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_NntpPoll, 60 },
/*
** .pp
** The time in seconds until any operations on newsgroup except post new
** recheck newsgroup on each operation in index (stepping, read article,
** etc.).
*/
- { "nntp_user", DT_STRING|DT_SENSITIVE, R_NONE, &C_NntpUser, 0 },
+ { "nntp_user", DT_STRING|DT_SENSITIVE, 0, &C_NntpUser, 0 },
/*
** .pp
** Your login name on the NNTP server. If \fIunset\fP and NNTP server requires
** connect to news server.
*/
#endif
- { "pager", DT_COMMAND, R_NONE, &C_Pager, IP "builtin" },
+ { "pager", DT_COMMAND, 0, &C_Pager, IP "builtin" },
/*
** .pp
** This variable specifies which pager you would like to use to view
** directly from the pager, and screen resizes cause lines longer than
** the screen width to be badly formatted in the help menu.
*/
- { "pager_context", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_PagerContext, 0 },
+ { "pager_context", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_PagerContext, 0 },
/*
** .pp
** This variable controls the number of lines of context that are given
** results. If positive, this many lines will be given before a match,
** if 0, the match will be top-aligned.
*/
- { "pager_format", DT_STRING, R_PAGER, &C_PagerFormat, IP "-%Z- %C/%m: %-20.20n %s%* -- (%P)" },
+ { "pager_format", DT_STRING|R_PAGER, 0, &C_PagerFormat, IP "-%Z- %C/%m: %-20.20n %s%* -- (%P)" },
/*
** .pp
** This variable controls the format of the one-line message "status"
** pager. The valid sequences are listed in the $$index_format
** section.
*/
- { "pager_index_lines", DT_NUMBER|DT_NOT_NEGATIVE, R_PAGER, &C_PagerIndexLines, 0 },
+ { "pager_index_lines", DT_NUMBER|DT_NOT_NEGATIVE|R_PAGER, 0, &C_PagerIndexLines, 0 },
/*
** .pp
** Determines the number of lines of a mini-index which is shown when in
** is less than $$pager_index_lines, then the index will only use as
** many lines as it needs.
*/
- { "pager_stop", DT_BOOL, R_NONE, &C_PagerStop, false },
+ { "pager_stop", DT_BOOL, 0, &C_PagerStop, false },
/*
** .pp
** When \fIset\fP, the internal-pager will \fBnot\fP move to the next message
** when you are at the end of a message and invoke the \fC<next-page>\fP
** function.
*/
- { "pgp_auto_decode", DT_BOOL, R_NONE, &C_PgpAutoDecode, false },
+ { "pgp_auto_decode", DT_BOOL, 0, &C_PgpAutoDecode, false },
/*
** .pp
** If \fIset\fP, NeoMutt will automatically attempt to decrypt traditional PGP
** checked with the \fC$<check-traditional-pgp>\fP function, NeoMutt will automatically
** check the message for traditional pgp.
*/
- { "pgp_autoinline", DT_BOOL, R_NONE, &C_PgpAutoinline, false },
+ { "pgp_autoinline", DT_BOOL, 0, &C_PgpAutoinline, false },
/*
** .pp
** This option controls whether NeoMutt generates old-style inline
** (PGP only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_PGP
- { "pgp_check_exit", DT_BOOL, R_NONE, &C_PgpCheckExit, true },
+ { "pgp_check_exit", DT_BOOL, 0, &C_PgpCheckExit, true },
/*
** .pp
** If \fIset\fP, NeoMutt will check the exit code of the PGP subprocess when
** subprocess failed.
** (PGP only)
*/
- { "pgp_check_gpg_decrypt_status_fd", DT_BOOL, R_NONE, &C_PgpCheckGpgDecryptStatusFd, true },
+ { "pgp_check_gpg_decrypt_status_fd", DT_BOOL, 0, &C_PgpCheckGpgDecryptStatusFd, true },
/*
** .pp
** If \fIset\fP, mutt will check the status file descriptor output
** against $$pgp_decryption_okay.
** (PGP only)
*/
- { "pgp_clearsign_command", DT_COMMAND, R_NONE, &C_PgpClearsignCommand, 0 },
+ { "pgp_clearsign_command", DT_COMMAND, 0, &C_PgpClearsignCommand, 0 },
/*
** .pp
** This format is used to create an old-style "clearsigned" PGP
** one or more quoted values such as email address, name, or keyid.
** (PGP only)
*/
- { "pgp_decode_command", DT_COMMAND, R_NONE, &C_PgpDecodeCommand, 0 },
+ { "pgp_decode_command", DT_COMMAND, 0, &C_PgpDecodeCommand, 0 },
/*
** .pp
** This format strings specifies a command which is used to decode
** alongside the documentation.
** (PGP only)
*/
- { "pgp_decrypt_command", DT_COMMAND, R_NONE, &C_PgpDecryptCommand, 0 },
+ { "pgp_decrypt_command", DT_COMMAND, 0, &C_PgpDecryptCommand, 0 },
/*
** .pp
** This command is used to decrypt a PGP encrypted message.
** .pp
** See also: https://github.com/neomutt/neomutt/issues/1014
*/
- { "pgp_decryption_okay", DT_REGEX, R_NONE, &C_PgpDecryptionOkay, 0 },
+ { "pgp_decryption_okay", DT_REGEX, 0, &C_PgpDecryptionOkay, 0 },
/*
** .pp
** If you assign text to this variable, then an encrypted PGP
** (PGP only)
*/
#endif
- { "pgp_default_key", DT_STRING, R_NONE, &C_PgpDefaultKey, 0 },
+ { "pgp_default_key", DT_STRING, 0, &C_PgpDefaultKey, 0 },
/*
** .pp
** This is the default key-pair to use for PGP operations. It will be
** (PGP only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_PGP
- { "pgp_encrypt_only_command", DT_COMMAND, R_NONE, &C_PgpEncryptOnlyCommand, 0 },
+ { "pgp_encrypt_only_command", DT_COMMAND, 0, &C_PgpEncryptOnlyCommand, 0 },
/*
** .pp
** This command is used to encrypt a body part without signing it.
** one or more quoted values such as email address, name, or keyid.
** (PGP only)
*/
- { "pgp_encrypt_sign_command", DT_COMMAND, R_NONE, &C_PgpEncryptSignCommand, 0 },
+ { "pgp_encrypt_sign_command", DT_COMMAND, 0, &C_PgpEncryptSignCommand, 0 },
/*
** .pp
** This command is used to both sign and encrypt a body part.
** (PGP only)
*/
#endif
- { "pgp_entry_format", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_PgpEntryFormat, IP "%4n %t%f %4l/0x%k %-4a %2c %u" },
+ { "pgp_entry_format", DT_STRING|DT_NOT_EMPTY, 0, &C_PgpEntryFormat, IP "%4n %t%f %4l/0x%k %-4a %2c %u" },
/*
** .pp
** This variable allows you to customize the PGP key selection menu to
** (PGP only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_PGP
- { "pgp_export_command", DT_COMMAND, R_NONE, &C_PgpExportCommand, 0 },
+ { "pgp_export_command", DT_COMMAND, 0, &C_PgpExportCommand, 0 },
/*
** .pp
** This command is used to export a public key from the user's
** possible \fCprintf(3)\fP-like sequences.
** (PGP only)
*/
- { "pgp_getkeys_command", DT_COMMAND, R_NONE, &C_PgpGetkeysCommand, 0 },
+ { "pgp_getkeys_command", DT_COMMAND, 0, &C_PgpGetkeysCommand, 0 },
/*
** .pp
** This command is invoked whenever NeoMutt needs to fetch the public key associated with
** unknown, which is why NeoMutt is invoking this command).
** (PGP only)
*/
- { "pgp_good_sign", DT_REGEX, R_NONE, &C_PgpGoodSign, 0 },
+ { "pgp_good_sign", DT_REGEX, 0, &C_PgpGoodSign, 0 },
/*
** .pp
** If you assign a text to this variable, then a PGP signature is only
** (PGP only)
*/
#endif
- { "pgp_ignore_subkeys", DT_BOOL, R_NONE, &C_PgpIgnoreSubkeys, true },
+ { "pgp_ignore_subkeys", DT_BOOL, 0, &C_PgpIgnoreSubkeys, true },
/*
** .pp
** Setting this variable will cause NeoMutt to ignore OpenPGP subkeys. Instead,
** (PGP only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_PGP
- { "pgp_import_command", DT_COMMAND, R_NONE, &C_PgpImportCommand, 0 },
+ { "pgp_import_command", DT_COMMAND, 0, &C_PgpImportCommand, 0 },
/*
** .pp
** This command is used to import a key from a message into
** possible \fCprintf(3)\fP-like sequences.
** (PGP only)
*/
- { "pgp_list_pubring_command", DT_COMMAND, R_NONE, &C_PgpListPubringCommand, 0 },
+ { "pgp_list_pubring_command", DT_COMMAND, 0, &C_PgpListPubringCommand, 0 },
/*
** .pp
** This command is used to list the public key ring's contents. The
** possible \fCprintf(3)\fP-like sequences.
** (PGP only)
*/
- { "pgp_list_secring_command", DT_COMMAND, R_NONE, &C_PgpListSecringCommand, 0 },
+ { "pgp_list_secring_command", DT_COMMAND, 0, &C_PgpListSecringCommand, 0 },
/*
** .pp
** This command is used to list the secret key ring's contents. The
** (PGP only)
*/
#endif
- { "pgp_long_ids", DT_BOOL, R_NONE, &C_PgpLongIds, true },
+ { "pgp_long_ids", DT_BOOL, 0, &C_PgpLongIds, true },
/*
** .pp
** If \fIset\fP, use 64 bit PGP key IDs, if \fIunset\fP use the normal 32 bit key IDs.
** in the key selection menu and a few other places.
** (PGP only)
*/
- { "pgp_mime_auto", DT_QUAD, R_NONE, &C_PgpMimeAuto, MUTT_ASKYES },
+ { "pgp_mime_auto", DT_QUAD, 0, &C_PgpMimeAuto, MUTT_ASKYES },
/*
** .pp
** This option controls whether NeoMutt will prompt you for
** \fBdeprecated\fP.
** (PGP only)
*/
- { "pgp_replyinline", DT_BOOL, R_NONE, &C_PgpReplyinline, false },
+ { "pgp_replyinline", DT_BOOL, 0, &C_PgpReplyinline, false },
/*
** .pp
** Setting this variable will cause NeoMutt to always attempt to
** \fBdeprecated\fP.
** (PGP only)
*/
- { "pgp_retainable_sigs", DT_BOOL, R_NONE, &C_PgpRetainableSigs, false },
+ { "pgp_retainable_sigs", DT_BOOL, 0, &C_PgpRetainableSigs, false },
/*
** .pp
** If \fIset\fP, signed and encrypted messages will consist of nested
** removed, while the inner \fCmultipart/signed\fP part is retained.
** (PGP only)
*/
- { "pgp_self_encrypt", DT_BOOL, R_NONE, &C_PgpSelfEncrypt, true },
+ { "pgp_self_encrypt", DT_BOOL, 0, &C_PgpSelfEncrypt, true },
/*
** .pp
** When \fIset\fP, PGP encrypted messages will also be encrypted
** using the key in $$pgp_default_key.
** (PGP only)
*/
- { "pgp_show_unusable", DT_BOOL, R_NONE, &C_PgpShowUnusable, true },
+ { "pgp_show_unusable", DT_BOOL, 0, &C_PgpShowUnusable, true },
/*
** .pp
** If \fIset\fP, NeoMutt will display non-usable keys on the PGP key selection
** have been marked as "disabled" by the user.
** (PGP only)
*/
- { "pgp_sign_as", DT_STRING, R_NONE, &C_PgpSignAs, 0 },
+ { "pgp_sign_as", DT_STRING, 0, &C_PgpSignAs, 0 },
/*
** .pp
** If you have a different key pair to use for signing, you should
** (PGP only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_PGP
- { "pgp_sign_command", DT_COMMAND, R_NONE, &C_PgpSignCommand, 0 },
+ { "pgp_sign_command", DT_COMMAND, 0, &C_PgpSignCommand, 0 },
/*
** .pp
** This command is used to create the detached PGP signature for a
** (PGP only)
*/
#endif
- { "pgp_sort_keys", DT_SORT|DT_SORT_KEYS, R_NONE, &C_PgpSortKeys, SORT_ADDRESS },
+ { "pgp_sort_keys", DT_SORT|DT_SORT_KEYS, 0, &C_PgpSortKeys, SORT_ADDRESS },
/*
** .pp
** Specifies how the entries in the pgp menu are sorted. The
** "reverse-".
** (PGP only)
*/
- { "pgp_strict_enc", DT_BOOL, R_NONE, &C_PgpStrictEnc, true },
+ { "pgp_strict_enc", DT_BOOL, 0, &C_PgpStrictEnc, true },
/*
** .pp
** If \fIset\fP, NeoMutt will automatically encode PGP/MIME signed messages as
** (PGP only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_PGP
- { "pgp_timeout", DT_LONG|DT_NOT_NEGATIVE, R_NONE, &C_PgpTimeout, 300 },
+ { "pgp_timeout", DT_LONG|DT_NOT_NEGATIVE, 0, &C_PgpTimeout, 300 },
/*
** .pp
** The number of seconds after which a cached passphrase will expire if
** not used.
** (PGP only)
*/
- { "pgp_use_gpg_agent", DT_BOOL, R_NONE, &C_PgpUseGpgAgent, true },
+ { "pgp_use_gpg_agent", DT_BOOL, 0, &C_PgpUseGpgAgent, true },
/*
** .pp
** If \fIset\fP, NeoMutt expects a \fCgpg-agent(1)\fP process will handle
** \fIunset\fP this variable.
** (PGP only)
*/
- { "pgp_verify_command", DT_COMMAND, R_NONE, &C_PgpVerifyCommand, 0 },
+ { "pgp_verify_command", DT_COMMAND, 0, &C_PgpVerifyCommand, 0 },
/*
** .pp
** This command is used to verify PGP signatures.
** possible \fCprintf(3)\fP-like sequences.
** (PGP only)
*/
- { "pgp_verify_key_command", DT_COMMAND, R_NONE, &C_PgpVerifyKeyCommand, 0 },
+ { "pgp_verify_key_command", DT_COMMAND, 0, &C_PgpVerifyKeyCommand, 0 },
/*
** .pp
** This command is used to verify key information from the key selection
** (PGP only)
*/
#endif
- { "pipe_decode", DT_BOOL, R_NONE, &C_PipeDecode, false },
+ { "pipe_decode", DT_BOOL, 0, &C_PipeDecode, false },
/*
** .pp
** Used in connection with the \fC<pipe-message>\fP command. When \fIunset\fP,
** will weed headers and will attempt to decode the messages
** first.
*/
- { "pipe_sep", DT_STRING, R_NONE, &C_PipeSep, IP "\n" },
+ { "pipe_sep", DT_STRING, 0, &C_PipeSep, IP "\n" },
/*
** .pp
** The separator to add between messages when piping a list of tagged
** messages to an external Unix command.
*/
- { "pipe_split", DT_BOOL, R_NONE, &C_PipeSplit, false },
+ { "pipe_split", DT_BOOL, 0, &C_PipeSplit, false },
/*
** .pp
** Used in connection with the \fC<pipe-message>\fP function following
** and the $$pipe_sep separator is added after each message.
*/
#ifdef USE_POP
- { "pop_auth_try_all", DT_BOOL, R_NONE, &C_PopAuthTryAll, true },
+ { "pop_auth_try_all", DT_BOOL, 0, &C_PopAuthTryAll, true },
/*
** .pp
** If \fIset\fP, NeoMutt will try all available authentication methods.
** methods if the previous methods are unavailable. If a method is
** available but authentication fails, NeoMutt will not connect to the POP server.
*/
- { "pop_authenticators", DT_STRING, R_NONE, &C_PopAuthenticators, 0 },
+ { "pop_authenticators", DT_STRING, 0, &C_PopAuthenticators, 0 },
/*
** .pp
** This is a colon-delimited list of authentication methods NeoMutt may
** set pop_authenticators="digest-md5:apop:user"
** .te
*/
- { "pop_checkinterval", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_PopCheckinterval, 60 },
+ { "pop_checkinterval", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_PopCheckinterval, 60 },
/*
** .pp
** This variable configures how often (in seconds) NeoMutt should look for
** new mail in the currently selected mailbox if it is a POP mailbox.
*/
- { "pop_delete", DT_QUAD, R_NONE, &C_PopDelete, MUTT_ASKNO },
+ { "pop_delete", DT_QUAD, 0, &C_PopDelete, MUTT_ASKNO },
/*
** .pp
** If \fIset\fP, NeoMutt will delete successfully downloaded messages from the POP
** server when using the \fC$<fetch-mail>\fP function. When \fIunset\fP, NeoMutt will
** download messages but also leave them on the POP server.
*/
- { "pop_host", DT_STRING, R_NONE, &C_PopHost, 0 },
+ { "pop_host", DT_STRING, 0, &C_PopHost, 0 },
/*
** .pp
** The name of your POP server for the \fC$<fetch-mail>\fP function. You
** .pp
** where "[...]" denotes an optional part.
*/
- { "pop_last", DT_BOOL, R_NONE, &C_PopLast, false },
+ { "pop_last", DT_BOOL, 0, &C_PopLast, false },
/*
** .pp
** If this variable is \fIset\fP, NeoMutt will try to use the "\fCLAST\fP" POP command
** for retrieving only unread messages from the POP server when using
** the \fC$<fetch-mail>\fP function.
*/
- { "pop_oauth_refresh_command", DT_STRING|DT_SENSITIVE, R_NONE, &C_PopOauthRefreshCommand, 0 },
+ { "pop_oauth_refresh_command", DT_STRING|DT_SENSITIVE, 0, &C_PopOauthRefreshCommand, 0 },
/*
** .pp
** The command to run to generate an OAUTH refresh token for
** run on every connection attempt that uses the OAUTHBEARER authentication
** mechanism. See "$oauth" for details.
*/
- { "pop_pass", DT_STRING|DT_SENSITIVE, R_NONE, &C_PopPass, 0 },
+ { "pop_pass", DT_STRING|DT_SENSITIVE, 0, &C_PopPass, 0 },
/*
** .pp
** Specifies the password for your POP account. If \fIunset\fP, NeoMutt will
** fairly secure machine, because the superuser can read your neomuttrc
** even if you are the only one who can read the file.
*/
- { "pop_reconnect", DT_QUAD, R_NONE, &C_PopReconnect, MUTT_ASKYES },
+ { "pop_reconnect", DT_QUAD, 0, &C_PopReconnect, MUTT_ASKYES },
/*
** .pp
** Controls whether or not NeoMutt will try to reconnect to the POP server if
** the connection is lost.
*/
- { "pop_user", DT_STRING|DT_SENSITIVE, R_NONE, &C_PopUser, 0 },
+ { "pop_user", DT_STRING|DT_SENSITIVE, 0, &C_PopUser, 0 },
/*
** .pp
** Your login name on the POP server.
** This variable defaults to your user name on the local machine.
*/
#endif /* USE_POP */
- { "post_indent_string", DT_STRING, R_NONE, &C_PostIndentString, 0 },
+ { "post_indent_string", DT_STRING, 0, &C_PostIndentString, 0 },
/*
** .pp
** Similar to the $$attribution variable, NeoMutt will append this
** string after the inclusion of a message which is being replied to.
*/
#ifdef USE_NNTP
- { "post_moderated", DT_QUAD, R_NONE, &C_PostModerated, MUTT_ASKYES },
+ { "post_moderated", DT_QUAD, 0, &C_PostModerated, MUTT_ASKYES },
/*
** .pp
** If set to \fIyes\fP, NeoMutt will post article to newsgroup that have
** posting will not have an effect.
*/
#endif
- { "postpone", DT_QUAD, R_NONE, &C_Postpone, MUTT_ASKYES },
+ { "postpone", DT_QUAD, 0, &C_Postpone, MUTT_ASKYES },
/*
** .pp
** Controls whether or not messages are saved in the $$postponed
** .pp
** Also see the $$recall variable.
*/
- { "postpone_encrypt", DT_BOOL, R_NONE, &C_PostponeEncrypt, false },
+ { "postpone_encrypt", DT_BOOL, 0, &C_PostponeEncrypt, false },
/*
** .pp
** When \fIset\fP, postponed messages that are marked for encryption will be
** set, it will try the deprecated $$postpone_encrypt_as.
** (Crypto only)
*/
- { "postpone_encrypt_as", DT_STRING, R_NONE, &C_PostponeEncryptAs, 0 },
+ { "postpone_encrypt_as", DT_STRING, 0, &C_PostponeEncryptAs, 0 },
/*
** .pp
** This is a deprecated fall-back variable for $$postpone_encrypt.
** Please use $$pgp_default_key or $$smime_default_key.
** (Crypto only)
*/
- { "postponed", DT_PATH|DT_MAILBOX, R_INDEX, &C_Postponed, IP "~/postponed" },
+ { "postponed", DT_PATH|DT_MAILBOX|R_INDEX, 0, &C_Postponed, IP "~/postponed" },
/*
** .pp
** NeoMutt allows you to indefinitely "$postpone sending a message" which
** Also see the $$postpone variable.
*/
#ifdef USE_SOCKET
- { "preconnect", DT_STRING, R_NONE, &C_Preconnect, 0 },
+ { "preconnect", DT_STRING, 0, &C_Preconnect, 0 },
/*
** .pp
** If \fIset\fP, a shell command to be executed if NeoMutt fails to establish
** remote machine without having to enter a password.
*/
#endif /* USE_SOCKET */
- { "preferred_languages", DT_STRING, R_NONE, &C_PreferredLanguages, 0 },
+ { "preferred_languages", DT_STRING, 0, &C_PreferredLanguages, 0 },
/*
** .pp
** RFC8255 : user preferred languages to be search in parts and display
** Ex. : set preferred_languages="en,fr,de"
*/
- { "print", DT_QUAD, R_NONE, &C_Print, MUTT_ASKNO },
+ { "print", DT_QUAD, 0, &C_Print, MUTT_ASKNO },
/*
** .pp
** Controls whether or not NeoMutt really prints messages.
** This is set to "ask-no" by default, because some people
** accidentally hit "p" often.
*/
- { "print_command", DT_COMMAND, R_NONE, &C_PrintCommand, IP "lpr" },
+ { "print_command", DT_COMMAND, 0, &C_PrintCommand, IP "lpr" },
/*
** .pp
** This specifies the command pipe that should be used to print messages.
*/
- { "print_decode", DT_BOOL, R_NONE, &C_PrintDecode, true },
+ { "print_decode", DT_BOOL, 0, &C_PrintDecode, true },
/*
** .pp
** Used in connection with the \fC<print-message>\fP command. If this
** some advanced printer filter which is able to properly format
** e-mail messages for printing.
*/
- { "print_split", DT_BOOL, R_NONE, &C_PrintSplit, false },
+ { "print_split", DT_BOOL, 0, &C_PrintSplit, false },
/*
** .pp
** Used in connection with the \fC<print-message>\fP command. If this option
** Those who use the \fCenscript\fP(1) program's mail-printing mode will
** most likely want to \fIset\fP this option.
*/
- { "prompt_after", DT_BOOL, R_NONE, &C_PromptAfter, true },
+ { "prompt_after", DT_BOOL, 0, &C_PromptAfter, true },
/*
** .pp
** If you use an \fIexternal\fP $$pager, setting this variable will
** than returning to the index menu. If \fIunset\fP, NeoMutt will return to the
** index menu when the external pager exits.
*/
- { "query_command", DT_COMMAND, R_NONE, &C_QueryCommand, 0 },
+ { "query_command", DT_COMMAND, 0, &C_QueryCommand, 0 },
/*
** .pp
** This specifies the command NeoMutt will use to make external address
** the string, NeoMutt will append the user's query to the end of the string.
** See "$query" for more information.
*/
- { "query_format", DT_STRING|DT_NOT_EMPTY, R_NONE, &C_QueryFormat, IP "%4c %t %-25.25a %-25.25n %?e?(%e)?" },
+ { "query_format", DT_STRING|DT_NOT_EMPTY, 0, &C_QueryFormat, IP "%4c %t %-25.25a %-25.25n %?e?(%e)?" },
/*
** .pp
** This variable describes the format of the "query" menu. The
** .pp
** * = can be optionally printed if nonzero, see the $$status_format documentation.
*/
- { "quit", DT_QUAD, R_NONE, &C_Quit, MUTT_YES },
+ { "quit", DT_QUAD, 0, &C_Quit, MUTT_YES },
/*
** .pp
** This variable controls whether "quit" and "exit" actually quit
** have no effect, and if it is set to \fIask-yes\fP or \fIask-no\fP, you are
** prompted for confirmation when you try to quit.
*/
- { "quote_regex", DT_REGEX, R_PAGER, &C_QuoteRegex, IP "^([ \t]*[|>:}#])+" },
+ { "quote_regex", DT_REGEX|R_PAGER, 0, &C_QuoteRegex, IP "^([ \t]*[|>:}#])+" },
/*
** .pp
** A regular expression used in the internal pager to determine quoted
** .pp
** Match detection may be overridden by the $$smileys regular expression.
*/
- { "read_inc", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_ReadInc, 10 },
+ { "read_inc", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_ReadInc, 10 },
/*
** .pp
** If set to a value greater than 0, NeoMutt will display which message it
** Also see the $$write_inc, $$net_inc and $$time_inc variables and the
** "$tuning" section of the manual for performance considerations.
*/
- { "read_only", DT_BOOL, R_NONE, &C_ReadOnly, false },
+ { "read_only", DT_BOOL, 0, &C_ReadOnly, false },
/*
** .pp
** If \fIset\fP, all folders are opened in read-only mode.
*/
- { "realname", DT_STRING, R_INDEX|R_PAGER, &C_Realname, 0 },
+ { "realname", DT_STRING|R_INDEX|R_PAGER, 0, &C_Realname, 0 },
/*
** .pp
** This variable specifies what "real" or "personal" name should be used
** If not specified, then the user's "real name" will be read from \fC/etc/passwd\fP.
** This option will not be used, if "$$from" is set.
*/
- { "recall", DT_QUAD, R_NONE, &C_Recall, MUTT_ASKYES },
+ { "recall", DT_QUAD, 0, &C_Recall, MUTT_ASKYES },
/*
** .pp
** Controls whether or not NeoMutt recalls postponed messages
** .pp
** Also see $$postponed variable.
*/
- { "record", DT_PATH|DT_MAILBOX, R_NONE, &C_Record, IP "~/sent" },
+ { "record", DT_PATH|DT_MAILBOX, 0, &C_Record, IP "~/sent" },
/*
** .pp
** This specifies the file into which your outgoing messages should be
** The value of \fI$$record\fP is overridden by the $$force_name and
** $$save_name variables, and the "$fcc-hook" command. Also see $$copy.
*/
- { "reflow_space_quotes", DT_BOOL, R_NONE, &C_ReflowSpaceQuotes, true },
+ { "reflow_space_quotes", DT_BOOL, 0, &C_ReflowSpaceQuotes, true },
/*
** .pp
** This option controls how quotes from format=flowed messages are displayed
** \fBNote:\fP If $$reflow_text is \fIunset\fP, this option has no effect.
** Also, this option does not affect replies when $$text_flowed is \fIset\fP.
*/
- { "reflow_text", DT_BOOL, R_NONE, &C_ReflowText, true },
+ { "reflow_text", DT_BOOL, 0, &C_ReflowText, true },
/*
** .pp
** When \fIset\fP, NeoMutt will reformat paragraphs in text/plain
** .pp
** Also see $$reflow_wrap, and $$wrap.
*/
- { "reflow_wrap", DT_NUMBER, R_NONE, &C_ReflowWrap, 78 },
+ { "reflow_wrap", DT_NUMBER, 0, &C_ReflowWrap, 78 },
/*
** .pp
** This variable controls the maximum paragraph width when reformatting text/plain
** .pp
** Also see $$wrap.
*/
- { "reply_regex", DT_REGEX, R_INDEX|R_RESORT, &C_ReplyRegex, IP "^((re|aw|sv)(\\[[0-9]+\\])*:[ \t]*)*", reply_validator },
+ { "reply_regex", DT_REGEX|R_INDEX|R_RESORT, 0, &C_ReplyRegex, IP "^((re|aw|sv)(\\[[0-9]+\\])*:[ \t]*)*", reply_validator },
/*
** .pp
** A regular expression used to recognize reply messages when threading
** and replying. The default value corresponds to the English "Re:", the
** German "Aw:" and the Swedish "Sv:".
*/
- { "reply_self", DT_BOOL, R_NONE, &C_ReplySelf, false },
+ { "reply_self", DT_BOOL, 0, &C_ReplySelf, false },
/*
** .pp
** If \fIunset\fP and you are replying to a message sent by you, NeoMutt will
** .pp
** Also see the "$alternates" command.
*/
- { "reply_to", DT_QUAD, R_NONE, &C_ReplyTo, MUTT_ASKYES },
+ { "reply_to", DT_QUAD, 0, &C_ReplyTo, MUTT_ASKYES },
/*
** .pp
** If \fIset\fP, when replying to a message, NeoMutt will use the address listed
** header field to the list address and you want to send a private
** message to the author of a message.
*/
- { "reply_with_xorig", DT_BOOL, R_NONE, &C_ReplyWithXorig, false },
+ { "reply_with_xorig", DT_BOOL, 0, &C_ReplyWithXorig, false },
/*
** .pp
** This variable provides a toggle. When active, the From: header will be
** Assuming 'fast_reply' is disabled, this option will prompt the user with a
** prefilled From: header.
*/
- { "resolve", DT_BOOL, R_NONE, &C_Resolve, true },
+ { "resolve", DT_BOOL, 0, &C_Resolve, true },
/*
** .pp
** When \fIset\fP, the cursor will be automatically advanced to the next
** (possibly undeleted) message whenever a command that modifies the
** current message is executed.
*/
- { "resume_draft_files", DT_BOOL, R_NONE, &C_ResumeDraftFiles, false },
+ { "resume_draft_files", DT_BOOL, 0, &C_ResumeDraftFiles, false },
/*
** .pp
** If \fIset\fP, draft files (specified by \fC-H\fP on the command
** evaluated; no alias expansion takes place; user-defined headers
** and signatures are not added to the message.
*/
- { "resume_edited_draft_files", DT_BOOL, R_NONE, &C_ResumeEditedDraftFiles, true },
+ { "resume_edited_draft_files", DT_BOOL, 0, &C_ResumeEditedDraftFiles, true },
/*
** .pp
** If \fIset\fP, draft files previously edited (via \fC-E -H\fP on
** user-defined headers, and other processing effects from being
** made multiple times to the draft file.
*/
- { "reverse_alias", DT_BOOL, R_INDEX|R_PAGER, &C_ReverseAlias, false },
+ { "reverse_alias", DT_BOOL|R_INDEX|R_PAGER, 0, &C_ReverseAlias, false },
/*
** .pp
** This variable controls whether or not NeoMutt will display the "personal"
** "abd30425@somewhere.net." This is useful when the person's e-mail
** address is not human friendly.
*/
- { "reverse_name", DT_BOOL, R_INDEX|R_PAGER, &C_ReverseName, false },
+ { "reverse_name", DT_BOOL|R_INDEX|R_PAGER, 0, &C_ReverseName, false },
/*
** .pp
** It may sometimes arrive that you receive mail to a certain machine,
** .pp
** Also see the "$alternates" command.
*/
- { "reverse_realname", DT_BOOL, R_INDEX|R_PAGER, &C_ReverseRealname, true },
+ { "reverse_realname", DT_BOOL|R_INDEX|R_PAGER, 0, &C_ReverseRealname, true },
/*
** .pp
** This variable fine-tunes the behavior of the $$reverse_name feature.
** possibly including eventual real names. When it is \fIunset\fP, NeoMutt will
** override any such real names with the setting of the $$realname variable.
*/
- { "rfc2047_parameters", DT_BOOL, R_NONE, &C_Rfc2047Parameters, false },
+ { "rfc2047_parameters", DT_BOOL, 0, &C_Rfc2047Parameters, false },
/*
** .pp
** When this variable is \fIset\fP, NeoMutt will decode RFC2047-encoded MIME
** that NeoMutt \fIgenerates\fP this kind of encoding. Instead, NeoMutt will
** unconditionally use the encoding specified in RFC2231.
*/
- { "save_address", DT_BOOL, R_NONE, &C_SaveAddress, false },
+ { "save_address", DT_BOOL, 0, &C_SaveAddress, false },
/*
** .pp
** If \fIset\fP, NeoMutt will take the sender's full address when choosing a
** default folder for saving a mail. If $$save_name or $$force_name
** is \fIset\fP too, the selection of the Fcc folder will be changed as well.
*/
- { "save_empty", DT_BOOL, R_NONE, &C_SaveEmpty, true },
+ { "save_empty", DT_BOOL, 0, &C_SaveEmpty, true },
/*
** .pp
** When \fIunset\fP, mailboxes which contain no saved messages will be removed
** \fBNote:\fP This only applies to mbox and MMDF folders, NeoMutt does not
** delete MH and Maildir directories.
*/
- { "save_history", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_SaveHistory, 0 },
+ { "save_history", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_SaveHistory, 0 },
/*
** .pp
** This variable controls the size of the history (per category) saved in the
** $$history_file file.
*/
- { "save_name", DT_BOOL, R_NONE, &C_SaveName, false },
+ { "save_name", DT_BOOL, 0, &C_SaveName, false },
/*
** .pp
** This variable controls how copies of outgoing messages are saved.
** Also see the $$force_name variable.
*/
#ifdef USE_NNTP
- { "save_unsubscribed", DT_BOOL, R_NONE, &C_SaveUnsubscribed, false },
+ { "save_unsubscribed", DT_BOOL, 0, &C_SaveUnsubscribed, false },
/*
** .pp
** When \fIset\fP, info about unsubscribed newsgroups will be saved into
** "newsrc" file and into cache.
*/
#endif
- { "score", DT_BOOL, R_NONE, &C_Score, true },
+ { "score", DT_BOOL, 0, &C_Score, true },
/*
** .pp
** When this variable is \fIunset\fP, scoring is turned off. This can
** be useful to selectively disable scoring for certain folders when the
** $$score_threshold_delete variable and related are used.
*/
- { "score_threshold_delete", DT_NUMBER, R_NONE, &C_ScoreThresholdDelete, -1 },
+ { "score_threshold_delete", DT_NUMBER, 0, &C_ScoreThresholdDelete, -1 },
/*
** .pp
** Messages which have been assigned a score equal to or lower than the value
** NeoMutt scores are always greater than or equal to zero, the default setting
** of this variable will never mark a message for deletion.
*/
- { "score_threshold_flag", DT_NUMBER, R_NONE, &C_ScoreThresholdFlag, 9999 },
+ { "score_threshold_flag", DT_NUMBER, 0, &C_ScoreThresholdFlag, 9999 },
/*
** .pp
** Messages which have been assigned a score greater than or equal to this
** variable's value are automatically marked "flagged".
*/
- { "score_threshold_read", DT_NUMBER, R_NONE, &C_ScoreThresholdRead, -1 },
+ { "score_threshold_read", DT_NUMBER, 0, &C_ScoreThresholdRead, -1 },
/*
** .pp
** Messages which have been assigned a score equal to or lower than the value
** NeoMutt scores are always greater than or equal to zero, the default setting
** of this variable will never mark a message read.
*/
- { "search_context", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_SearchContext, 0 },
+ { "search_context", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_SearchContext, 0 },
/*
** .pp
** For the pager, this variable specifies the number of lines shown
** before search results. By default, search results will be top-aligned.
*/
- { "send_charset", DT_STRING, R_NONE, &C_SendCharset, IP "us-ascii:iso-8859-1:utf-8", charset_validator },
+ { "send_charset", DT_STRING, 0, &C_SendCharset, IP "us-ascii:iso-8859-1:utf-8", charset_validator },
/*
** .pp
** A colon-delimited list of character sets for outgoing messages. NeoMutt will use the
** In case the text can't be converted into one of these exactly,
** NeoMutt uses $$charset as a fallback.
*/
- { "sendmail", DT_COMMAND, R_NONE, &C_Sendmail, IP SENDMAIL " -oem -oi" },
+ { "sendmail", DT_COMMAND, 0, &C_Sendmail, IP SENDMAIL " -oem -oi" },
/*
** .pp
** Specifies the program and arguments used to deliver mail sent by NeoMutt.
** flags, such as for $$use_8bitmime, $$use_envelope_from,
** $$dsn_notify, or $$dsn_return will be added before the delimiter.
*/
- { "sendmail_wait", DT_NUMBER, R_NONE, &C_SendmailWait, 0 },
+ { "sendmail_wait", DT_NUMBER, 0, &C_SendmailWait, 0 },
/*
** .pp
** Specifies the number of seconds to wait for the $$sendmail process
** process will be put in a temporary file. If there is some error, you
** will be informed as to where to find the output.
*/
- { "shell", DT_COMMAND, R_NONE, &C_Shell, IP "/bin/sh" },
+ { "shell", DT_COMMAND, 0, &C_Shell, IP "/bin/sh" },
/*
** .pp
** Command to use when spawning a subshell.
** If not specified, then the user's login shell from \fC/etc/passwd\fP is used.
*/
- { "show_multipart_alternative", DT_STRING, R_NONE, &C_ShowMultipartAlternative, 0, multipart_validator },
+ { "show_multipart_alternative", DT_STRING, 0, &C_ShowMultipartAlternative, 0, multipart_validator },
/*
** .pp
** When \fIset\fP to \fCinfo\fP, the multipart/alternative information is shown.
** When not set, the default behavior is to show only the chosen alternative.
*/
#ifdef USE_NNTP
- { "show_new_news", DT_BOOL, R_NONE, &C_ShowNewNews, true },
+ { "show_new_news", DT_BOOL, 0, &C_ShowNewNews, true },
/*
** .pp
** If \fIset\fP, news server will be asked for new newsgroups on entering
** Also controls whether or not number of new articles of subscribed
** newsgroups will be then checked.
*/
- { "show_only_unread", DT_BOOL, R_NONE, &C_ShowOnlyUnread, false },
+ { "show_only_unread", DT_BOOL, 0, &C_ShowOnlyUnread, false },
/*
** .pp
** If \fIset\fP, only subscribed newsgroups that contain unread articles
*/
#endif
#ifdef USE_SIDEBAR
- { "sidebar_component_depth", DT_NUMBER, R_SIDEBAR, &C_SidebarComponentDepth, 0 },
+ { "sidebar_component_depth", DT_NUMBER|R_SIDEBAR, 0, &C_SidebarComponentDepth, 0 },
/*
** .pp
** By default the sidebar will show the mailbox's path, relative to the
** .pp
** \fBSee also:\fP $$sidebar_short_path
*/
- { "sidebar_delim_chars", DT_STRING, R_SIDEBAR, &C_SidebarDelimChars, IP "/." },
+ { "sidebar_delim_chars", DT_STRING|R_SIDEBAR, 0, &C_SidebarDelimChars, IP "/." },
/*
** .pp
** This contains the list of characters which you would like to treat
** .pp
** \fBSee also:\fP $$sidebar_short_path, $$sidebar_folder_indent, $$sidebar_indent_string.
*/
- { "sidebar_divider_char", DT_STRING, R_SIDEBAR, &C_SidebarDividerChar, 0 },
+ { "sidebar_divider_char", DT_STRING|R_SIDEBAR, 0, &C_SidebarDividerChar, 0 },
/*
** .pp
** This specifies the characters to be drawn between the sidebar (when
** visible) and the other NeoMutt panels. ASCII and Unicode line-drawing
** characters are supported.
*/
- { "sidebar_folder_indent", DT_BOOL, R_SIDEBAR, &C_SidebarFolderIndent, false },
+ { "sidebar_folder_indent", DT_BOOL|R_SIDEBAR, 0, &C_SidebarFolderIndent, false },
/*
** .pp
** Set this to indent mailboxes in the sidebar.
** .pp
** \fBSee also:\fP $$sidebar_short_path, $$sidebar_indent_string, $$sidebar_delim_chars.
*/
- { "sidebar_format", DT_STRING|DT_NOT_EMPTY, R_SIDEBAR, &C_SidebarFormat, IP "%B%* %n" },
+ { "sidebar_format", DT_STRING|DT_NOT_EMPTY|R_SIDEBAR, 0, &C_SidebarFormat, IP "%B%* %n" },
/*
** .pp
** This variable allows you to customize the sidebar display. This string is
** be \fIset\fP. When thus set, a suggested value for this option is
** "%B%?F? [%F]?%* %?N?%N/?%S".
*/
- { "sidebar_indent_string", DT_STRING, R_SIDEBAR, &C_SidebarIndentString, IP " " },
+ { "sidebar_indent_string", DT_STRING|R_SIDEBAR, 0, &C_SidebarIndentString, IP " " },
/*
** .pp
** This specifies the string that is used to indent mailboxes in the sidebar.
** .pp
** \fBSee also:\fP $$sidebar_short_path, $$sidebar_folder_indent, $$sidebar_delim_chars.
*/
- { "sidebar_new_mail_only", DT_BOOL, R_SIDEBAR, &C_SidebarNewMailOnly, false },
+ { "sidebar_new_mail_only", DT_BOOL|R_SIDEBAR, 0, &C_SidebarNewMailOnly, false },
/*
** .pp
** When set, the sidebar will only display mailboxes containing new, or
** .pp
** \fBSee also:\fP $$sidebar_whitelist, $$sidebar_non_empty_mailbox_only.
*/
- { "sidebar_non_empty_mailbox_only", DT_BOOL, R_SIDEBAR, &C_SidebarNonEmptyMailboxOnly, false },
+ { "sidebar_non_empty_mailbox_only", DT_BOOL|R_SIDEBAR, 0, &C_SidebarNonEmptyMailboxOnly, false },
/*
** .pp
** When set, the sidebar will only display mailboxes that contain one or more mails.
** .pp
** \fBSee also:\fP $$sidebar_new_mail_only, $$sidebar_whitelist.
*/
- { "sidebar_next_new_wrap", DT_BOOL, R_NONE, &C_SidebarNextNewWrap, false },
+ { "sidebar_next_new_wrap", DT_BOOL, 0, &C_SidebarNextNewWrap, false },
/*
** .pp
** When set, the \fC<sidebar-next-new>\fP command will not stop and the end of
** \fC<sidebar-prev-new>\fP command is similarly affected, wrapping around to
** the end of the list.
*/
- { "sidebar_on_right", DT_BOOL, R_INDEX|R_PAGER|R_REFLOW, &C_SidebarOnRight, false },
+ { "sidebar_on_right", DT_BOOL|R_INDEX|R_PAGER|R_REFLOW, 0, &C_SidebarOnRight, false },
/*
** .pp
** When set, the sidebar will appear on the right-hand side of the screen.
*/
- { "sidebar_short_path", DT_BOOL, R_SIDEBAR, &C_SidebarShortPath, false },
+ { "sidebar_short_path", DT_BOOL|R_SIDEBAR, 0, &C_SidebarShortPath, false },
/*
** .pp
** By default the sidebar will show the mailbox's path, relative to the
** \fBSee also:\fP $$sidebar_delim_chars, $$sidebar_folder_indent,
** $$sidebar_indent_string, $$sidebar_component_depth.
*/
- { "sidebar_sort_method", DT_SORT|DT_SORT_SIDEBAR, R_SIDEBAR, &C_SidebarSortMethod, SORT_ORDER },
+ { "sidebar_sort_method", DT_SORT|DT_SORT_SIDEBAR|R_SIDEBAR, 0, &C_SidebarSortMethod, SORT_ORDER },
/*
** .pp
** Specifies how to sort entries in the file browser. By default, the
** You may optionally use the "reverse-" prefix to specify reverse sorting
** order (example: "\fCset sort_browser=reverse-date\fP").
*/
- { "sidebar_visible", DT_BOOL, R_REFLOW, &C_SidebarVisible, false },
+ { "sidebar_visible", DT_BOOL|R_REFLOW, 0, &C_SidebarVisible, false },
/*
** .pp
** This specifies whether or not to show sidebar. The sidebar shows a list of
** .pp
** \fBSee also:\fP $$sidebar_format, $$sidebar_width
*/
- { "sidebar_width", DT_NUMBER|DT_NOT_NEGATIVE, R_REFLOW, &C_SidebarWidth, 30 },
+ { "sidebar_width", DT_NUMBER|DT_NOT_NEGATIVE|R_REFLOW, 0, &C_SidebarWidth, 30 },
/*
** .pp
** This controls the width of the sidebar. It is measured in screen columns.
** Chinese characters.
*/
#endif
- { "sig_dashes", DT_BOOL, R_NONE, &C_SigDashes, true },
+ { "sig_dashes", DT_BOOL, 0, &C_SigDashes, true },
/*
** .pp
** If \fIset\fP, a line containing "-- " (note the trailing space) will be inserted before your
** detect your signature. For example, NeoMutt has the ability to highlight
** the signature in a different color in the built-in pager.
*/
- { "sig_on_top", DT_BOOL, R_NONE, &C_SigOnTop, false },
+ { "sig_on_top", DT_BOOL, 0, &C_SigOnTop, false },
/*
** .pp
** If \fIset\fP, the signature will be included before any quoted or forwarded
** unless you really know what you are doing, and are prepared to take
** some heat from netiquette guardians.
*/
- { "signature", DT_PATH, R_NONE, &C_Signature, IP "~/.signature" },
+ { "signature", DT_PATH, 0, &C_Signature, IP "~/.signature" },
/*
** .pp
** Specifies the filename of your signature, which is appended to all
** assumed that filename is a shell command and input should be read from
** its standard output.
*/
- { "simple_search", DT_STRING, R_NONE, &C_SimpleSearch, IP "~f %s | ~s %s" },
+ { "simple_search", DT_STRING, 0, &C_SimpleSearch, IP "~f %s | ~s %s" },
/*
** .pp
** Specifies how NeoMutt should expand a simple search into a real search
** replacing "%s" with the supplied string.
** For the default value, "joe" would be expanded to: "~f joe | ~s joe".
*/
- { "skip_quoted_offset", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_SkipQuotedOffset, 0 },
+ { "skip_quoted_offset", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_SkipQuotedOffset, 0 },
/*
** .pp
** Lines of quoted text that are displayed before the unquoted text after
** "skip to quoted" command (S)
*/
- { "sleep_time", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_SleepTime, 1 },
+ { "sleep_time", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_SleepTime, 1 },
/*
** .pp
** Specifies time, in seconds, to pause while displaying certain informational
** messages from the current folder. The default is to pause one second, so
** a value of zero for this option suppresses the pause.
*/
- { "smart_wrap", DT_BOOL, R_PAGER_FLOW, &C_SmartWrap, true },
+ { "smart_wrap", DT_BOOL|R_PAGER_FLOW, 0, &C_SmartWrap, true },
/*
** .pp
** Controls the display of lines longer than the screen width in the
** \fIunset\fP, lines are simply wrapped at the screen edge. Also see the
** $$markers variable.
*/
- { "smileys", DT_REGEX, R_PAGER, &C_Smileys, IP "(>From )|(:[-^]?[][)(><}{|/DP])" },
+ { "smileys", DT_REGEX|R_PAGER, 0, &C_Smileys, IP "(>From )|(:[-^]?[][)(><}{|/DP])" },
/*
** .pp
** The \fIpager\fP uses this variable to catch some common false
** happens at the beginning of a line.
*/
#ifdef CRYPT_BACKEND_CLASSIC_SMIME
- { "smime_ask_cert_label", DT_BOOL, R_NONE, &C_SmimeAskCertLabel, true },
+ { "smime_ask_cert_label", DT_BOOL, 0, &C_SmimeAskCertLabel, true },
/*
** .pp
** This flag controls whether you want to be asked to enter a label
** \fIset\fP by default.
** (S/MIME only)
*/
- { "smime_ca_location", DT_PATH, R_NONE, &C_SmimeCaLocation, 0 },
+ { "smime_ca_location", DT_PATH, 0, &C_SmimeCaLocation, 0 },
/*
** .pp
** This variable contains the name of either a directory, or a file which
** contains trusted certificates for use with OpenSSL.
** (S/MIME only)
*/
- { "smime_certificates", DT_PATH, R_NONE, &C_SmimeCertificates, 0 },
+ { "smime_certificates", DT_PATH, 0, &C_SmimeCertificates, 0 },
/*
** .pp
** Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
** the location of the certificates.
** (S/MIME only)
*/
- { "smime_decrypt_command", DT_COMMAND, R_NONE, &C_SmimeDecryptCommand, 0 },
+ { "smime_decrypt_command", DT_COMMAND, 0, &C_SmimeDecryptCommand, 0 },
/*
** .pp
** This format string specifies a command which is used to decrypt
** alongside the documentation.
** (S/MIME only)
*/
- { "smime_decrypt_use_default_key", DT_BOOL, R_NONE, &C_SmimeDecryptUseDefaultKey, true },
+ { "smime_decrypt_use_default_key", DT_BOOL, 0, &C_SmimeDecryptUseDefaultKey, true },
/*
** .pp
** If \fIset\fP (default) this tells NeoMutt to use the default key for decryption. Otherwise,
** (S/MIME only)
*/
#endif
- { "smime_default_key", DT_STRING, R_NONE, &C_SmimeDefaultKey, 0 },
+ { "smime_default_key", DT_STRING, 0, &C_SmimeDefaultKey, 0 },
/*
** .pp
** This is the default key-pair to use for S/MIME operations, and must be
** (S/MIME only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_SMIME
- { "smime_encrypt_command", DT_COMMAND, R_NONE, &C_SmimeEncryptCommand, 0 },
+ { "smime_encrypt_command", DT_COMMAND, 0, &C_SmimeEncryptCommand, 0 },
/*
** .pp
** This command is used to create encrypted S/MIME messages.
** (S/MIME only)
*/
#endif
- { "smime_encrypt_with", DT_STRING, R_NONE, &C_SmimeEncryptWith, IP "aes256" },
+ { "smime_encrypt_with", DT_STRING, 0, &C_SmimeEncryptWith, IP "aes256" },
/*
** .pp
** This sets the algorithm that should be used for encryption.
** (S/MIME only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_SMIME
- { "smime_get_cert_command", DT_COMMAND, R_NONE, &C_SmimeGetCertCommand, 0 },
+ { "smime_get_cert_command", DT_COMMAND, 0, &C_SmimeGetCertCommand, 0 },
/*
** .pp
** This command is used to extract X509 certificates from a PKCS7 structure.
** possible \fCprintf(3)\fP-like sequences.
** (S/MIME only)
*/
- { "smime_get_cert_email_command", DT_COMMAND, R_NONE, &C_SmimeGetCertEmailCommand, 0 },
+ { "smime_get_cert_email_command", DT_COMMAND, 0, &C_SmimeGetCertEmailCommand, 0 },
/*
** .pp
** This command is used to extract the mail address(es) used for storing
** possible \fCprintf(3)\fP-like sequences.
** (S/MIME only)
*/
- { "smime_get_signer_cert_command", DT_COMMAND, R_NONE, &C_SmimeGetSignerCertCommand, 0 },
+ { "smime_get_signer_cert_command", DT_COMMAND, 0, &C_SmimeGetSignerCertCommand, 0 },
/*
** .pp
** This command is used to extract only the signers X509 certificate from a S/MIME
** possible \fCprintf(3)\fP-like sequences.
** (S/MIME only)
*/
- { "smime_import_cert_command", DT_COMMAND, R_NONE, &C_SmimeImportCertCommand, 0 },
+ { "smime_import_cert_command", DT_COMMAND, 0, &C_SmimeImportCertCommand, 0 },
/*
** .pp
** This command is used to import a certificate via smime_keys.
** (S/MIME only)
*/
#endif
- { "smime_is_default", DT_BOOL, R_NONE, &C_SmimeIsDefault, false },
+ { "smime_is_default", DT_BOOL, 0, &C_SmimeIsDefault, false },
/*
** .pp
** The default behavior of NeoMutt is to use PGP on all auto-sign/encryption
** (S/MIME only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_SMIME
- { "smime_keys", DT_PATH, R_NONE, &C_SmimeKeys, 0 },
+ { "smime_keys", DT_PATH, 0, &C_SmimeKeys, 0 },
/*
** .pp
** Since for S/MIME there is no pubring/secring as with PGP, NeoMutt has to handle
** edited. This option points to the location of the private keys.
** (S/MIME only)
*/
- { "smime_pk7out_command", DT_COMMAND, R_NONE, &C_SmimePk7outCommand, 0 },
+ { "smime_pk7out_command", DT_COMMAND, 0, &C_SmimePk7outCommand, 0 },
/*
** .pp
** This command is used to extract PKCS7 structures of S/MIME signatures,
** (S/MIME only)
*/
#endif
- { "smime_self_encrypt", DT_BOOL, R_NONE, &C_SmimeSelfEncrypt, true },
+ { "smime_self_encrypt", DT_BOOL, 0, &C_SmimeSelfEncrypt, true },
/*
** .pp
** When \fIset\fP, S/MIME encrypted messages will also be encrypted
** using the certificate in $$smime_default_key.
** (S/MIME only)
*/
- { "smime_sign_as", DT_STRING, R_NONE, &C_SmimeSignAs, 0 },
+ { "smime_sign_as", DT_STRING, 0, &C_SmimeSignAs, 0 },
/*
** .pp
** If you have a separate key to use for signing, you should set this
** (S/MIME only)
*/
#ifdef CRYPT_BACKEND_CLASSIC_SMIME
- { "smime_sign_command", DT_COMMAND, R_NONE, &C_SmimeSignCommand, 0 },
+ { "smime_sign_command", DT_COMMAND, 0, &C_SmimeSignCommand, 0 },
/*
** .pp
** This command is used to created S/MIME signatures of type
** possible \fCprintf(3)\fP-like sequences.
** (S/MIME only)
*/
- { "smime_sign_digest_alg", DT_STRING, R_NONE, &C_SmimeSignDigestAlg, IP "sha256" },
+ { "smime_sign_digest_alg", DT_STRING, 0, &C_SmimeSignDigestAlg, IP "sha256" },
/*
** .pp
** This sets the algorithm that should be used for the signature message digest.
** Valid choices are "md5", "sha1", "sha224", "sha256", "sha384", "sha512".
** (S/MIME only)
*/
- { "smime_timeout", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_SmimeTimeout, 300 },
+ { "smime_timeout", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_SmimeTimeout, 300 },
/*
** .pp
** The number of seconds after which a cached passphrase will expire if
** not used.
** (S/MIME only)
*/
- { "smime_verify_command", DT_COMMAND, R_NONE, &C_SmimeVerifyCommand, 0 },
+ { "smime_verify_command", DT_COMMAND, 0, &C_SmimeVerifyCommand, 0 },
/*
** .pp
** This command is used to verify S/MIME signatures of type \fCmultipart/signed\fP.
** possible \fCprintf(3)\fP-like sequences.
** (S/MIME only)
*/
- { "smime_verify_opaque_command", DT_COMMAND, R_NONE, &C_SmimeVerifyOpaqueCommand, 0 },
+ { "smime_verify_opaque_command", DT_COMMAND, 0, &C_SmimeVerifyOpaqueCommand, 0 },
/*
** .pp
** This command is used to verify S/MIME signatures of type
*/
#endif
#ifdef USE_SMTP
- { "smtp_authenticators", DT_STRING, R_NONE, &C_SmtpAuthenticators, 0 },
+ { "smtp_authenticators", DT_STRING, 0, &C_SmtpAuthenticators, 0 },
/*
** .pp
** This is a colon-delimited list of authentication methods NeoMutt may
** set smtp_authenticators="digest-md5:cram-md5"
** .te
*/
- { "smtp_oauth_refresh_command", DT_STRING|DT_SENSITIVE, R_NONE, &C_SmtpOauthRefreshCommand, 0 },
+ { "smtp_oauth_refresh_command", DT_STRING|DT_SENSITIVE, 0, &C_SmtpOauthRefreshCommand, 0 },
/*
** .pp
** The command to run to generate an OAUTH refresh token for
** run on every connection attempt that uses the OAUTHBEARER authentication
** mechanism. See "$oauth" for details.
*/
- { "smtp_pass", DT_STRING|DT_SENSITIVE, R_NONE, &C_SmtpPass, 0 },
+ { "smtp_pass", DT_STRING|DT_SENSITIVE, 0, &C_SmtpPass, 0 },
/*
** .pp
** Specifies the password for your SMTP account. If \fIunset\fP, NeoMutt will
** fairly secure machine, because the superuser can read your neomuttrc even
** if you are the only one who can read the file.
*/
- { "smtp_url", DT_STRING|DT_SENSITIVE, R_NONE, &C_SmtpUrl, 0 },
+ { "smtp_url", DT_STRING|DT_SENSITIVE, 0, &C_SmtpUrl, 0 },
/*
** .pp
** Defines the SMTP smarthost where sent messages should relayed for
** variable.
*/
#endif /* USE_SMTP */
- { "sort", DT_SORT, R_INDEX|R_RESORT, &C_Sort, SORT_DATE, pager_validator },
+ { "sort", DT_SORT|R_INDEX|R_RESORT, 0, &C_Sort, SORT_DATE, pager_validator },
/*
** .pp
** Specifies how to sort messages in the "index" menu. Valid values
** set sort=reverse-date-sent
** .te
*/
- { "sort_alias", DT_SORT|DT_SORT_ALIAS, R_NONE, &C_SortAlias, SORT_ALIAS },
+ { "sort_alias", DT_SORT|DT_SORT_ALIAS, 0, &C_SortAlias, SORT_ALIAS },
/*
** .pp
** Specifies how the entries in the "alias" menu are sorted. The
** .dd unsorted (leave in order specified in .neomuttrc)
** .ie
*/
- { "sort_aux", DT_SORT|DT_SORT_AUX, R_INDEX|R_RESORT|R_RESORT_SUB, &C_SortAux, SORT_DATE },
+ { "sort_aux", DT_SORT|DT_SORT_AUX|R_INDEX|R_RESORT|R_RESORT_SUB, 0, &C_SortAux, SORT_DATE },
/*
** .pp
** This provides a secondary sort for messages in the "index" menu, used
** order, $$sort_aux is reversed again (which is not the right thing to do,
** but kept to not break any existing configuration setting).
*/
- { "sort_browser", DT_SORT|DT_SORT_BROWSER, R_NONE, &C_SortBrowser, SORT_ALPHA },
+ { "sort_browser", DT_SORT|DT_SORT_BROWSER, 0, &C_SortBrowser, SORT_ALPHA },
/*
** .pp
** Specifies how to sort entries in the file browser. By default, the
** You may optionally use the "reverse-" prefix to specify reverse sorting
** order (example: "\fCset sort_browser=reverse-date\fP").
*/
- { "sort_re", DT_BOOL, R_INDEX|R_RESORT|R_RESORT_INIT, &C_SortRe, true, pager_validator },
+ { "sort_re", DT_BOOL|R_INDEX|R_RESORT|R_RESORT_INIT, 0, &C_SortRe, true, pager_validator },
/*
** .pp
** This variable is only useful when sorting by mailboxes in sidebar. By default,
** .dd unsorted
** .ie
*/
- { "spam_separator", DT_STRING, R_NONE, &C_SpamSeparator, IP "," },
+ { "spam_separator", DT_STRING, 0, &C_SpamSeparator, IP "," },
/*
** .pp
** This variable controls what happens when multiple spam headers
** match will append to the previous, using this variable's value as a
** separator.
*/
- { "spoolfile", DT_PATH|DT_MAILBOX, R_NONE, &C_Spoolfile, 0 },
+ { "spoolfile", DT_PATH|DT_MAILBOX, 0, &C_Spoolfile, 0 },
/*
** .pp
** If your spool mailbox is in a non-default place where NeoMutt can't find
*/
#ifdef USE_SSL
#ifdef USE_SSL_GNUTLS
- { "ssl_ca_certificates_file", DT_PATH, R_NONE, &C_SslCaCertificatesFile, 0 },
+ { "ssl_ca_certificates_file", DT_PATH, 0, &C_SslCaCertificatesFile, 0 },
/*
** .pp
** This variable specifies a file containing trusted CA certificates.
** .te
*/
#endif /* USE_SSL_GNUTLS */
- { "ssl_ciphers", DT_STRING, R_NONE, &C_SslCiphers, 0 },
+ { "ssl_ciphers", DT_STRING, 0, &C_SslCiphers, 0 },
/*
** .pp
** Contains a colon-separated list of ciphers to use when using SSL.
** syntax and more details. (Note: GnuTLS version 2.1.7 or higher is
** required.)
*/
- { "ssl_client_cert", DT_PATH, R_NONE, &C_SslClientCert, 0 },
+ { "ssl_client_cert", DT_PATH, 0, &C_SslClientCert, 0 },
/*
** .pp
** The file containing a client certificate and its associated private
** key.
*/
- { "ssl_force_tls", DT_BOOL, R_NONE, &C_SslForceTls, true },
+ { "ssl_force_tls", DT_BOOL, 0, &C_SslForceTls, true },
/*
** .pp
** If this variable is \fIset\fP, NeoMutt will require that all connections
** option supersedes $$ssl_starttls.
*/
#ifdef USE_SSL_GNUTLS
- { "ssl_min_dh_prime_bits", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_SslMinDhPrimeBits, 0 },
+ { "ssl_min_dh_prime_bits", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_SslMinDhPrimeBits, 0 },
/*
** .pp
** This variable specifies the minimum acceptable prime size (in bits)
** the default from the GNUTLS library. (GnuTLS only)
*/
#endif /* USE_SSL_GNUTLS */
- { "ssl_starttls", DT_QUAD, R_NONE, &C_SslStarttls, MUTT_YES },
+ { "ssl_starttls", DT_QUAD, 0, &C_SslStarttls, MUTT_YES },
/*
** .pp
** If \fIset\fP (the default), NeoMutt will attempt to use \fCSTARTTLS\fP on servers
** use \fCSTARTTLS\fP regardless of the server's capabilities.
*/
#ifdef USE_SSL_OPENSSL
- { "ssl_use_sslv2", DT_BOOL, R_NONE, &C_SslUseSslv2, false },
+ { "ssl_use_sslv2", DT_BOOL, 0, &C_SslUseSslv2, false },
/*
** .pp
** If \fIset\fP , Mutt will use SSLv2 when communicating with servers that
** (OpenSSL only)
*/
#endif /* defined USE_SSL_OPENSSL */
- { "ssl_use_sslv3", DT_BOOL, R_NONE, &C_SslUseSslv3, false },
+ { "ssl_use_sslv3", DT_BOOL, 0, &C_SslUseSslv3, false },
/*
** .pp
** If \fIset\fP , Mutt will use SSLv3 when communicating with servers that
** request it. \fBN.B. As of 2015, SSLv3 is considered insecure, and using
** it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP
*/
- { "ssl_use_tlsv1", DT_BOOL, R_NONE, &C_SslUseTlsv1, false },
+ { "ssl_use_tlsv1", DT_BOOL, 0, &C_SslUseTlsv1, false },
/*
** .pp
** If \fIset\fP , Mutt will use TLSv1.0 when communicating with servers that
** request it. \fBN.B. As of 2015, TLSv1.0 is considered insecure, and using
** it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP
*/
- { "ssl_use_tlsv1_1", DT_BOOL, R_NONE, &C_SslUseTlsv11, false },
+ { "ssl_use_tlsv1_1", DT_BOOL, 0, &C_SslUseTlsv11, false },
/*
** .pp
** If \fIset\fP , Mutt will use TLSv1.1 when communicating with servers that
** request it. \fBN.B. As of 2015, TLSv1.1 is considered insecure, and using
** it is inadvisable. See https://tools.ietf.org/html/rfc7525 .\fP
*/
- { "ssl_use_tlsv1_2", DT_BOOL, R_NONE, &C_SslUseTlsv12, true },
+ { "ssl_use_tlsv1_2", DT_BOOL, 0, &C_SslUseTlsv12, true },
/*
** .pp
** If \fIset\fP , Mutt will use TLSv1.2 when communicating with servers that
** request it.
*/
#ifdef USE_SSL_OPENSSL
- { "ssl_usesystemcerts", DT_BOOL, R_NONE, &C_SslUsesystemcerts, true },
+ { "ssl_usesystemcerts", DT_BOOL, 0, &C_SslUsesystemcerts, true },
/*
** .pp
** If set to \fIyes\fP, NeoMutt will use CA certificates in the
** is signed by a trusted CA. (OpenSSL only)
*/
#endif
- { "ssl_verify_dates", DT_BOOL, R_NONE, &C_SslVerifyDates, true },
+ { "ssl_verify_dates", DT_BOOL, 0, &C_SslVerifyDates, true },
/*
** .pp
** If \fIset\fP (the default), NeoMutt will not automatically accept a server
** only unset this for particular known hosts, using the
** \fC$<account-hook>\fP function.
*/
- { "ssl_verify_host", DT_BOOL, R_NONE, &C_SslVerifyHost, true },
+ { "ssl_verify_host", DT_BOOL, 0, &C_SslVerifyHost, true },
/*
** .pp
** If \fIset\fP (the default), NeoMutt will not automatically accept a server
*/
#ifdef USE_SSL_OPENSSL
#ifdef HAVE_SSL_PARTIAL_CHAIN
- { "ssl_verify_partial_chains", DT_BOOL, R_NONE, &C_SslVerifyPartialChains, false },
+ { "ssl_verify_partial_chains", DT_BOOL, 0, &C_SslVerifyPartialChains, false },
/*
** .pp
** This option should not be changed from the default unless you understand
#endif /* defined HAVE_SSL_PARTIAL_CHAIN */
#endif /* defined USE_SSL_OPENSSL */
#endif /* defined(USE_SSL) */
- { "status_chars", DT_MBTABLE, R_INDEX|R_PAGER, &C_StatusChars, IP "-*%A" },
+ { "status_chars", DT_MBTABLE|R_INDEX|R_PAGER, 0, &C_StatusChars, IP "-*%A" },
/*
** .pp
** Controls the characters used by the "%r" indicator in $$status_format.
** forwarding, etc. are not permitted in this mode)
** .de
*/
- { "status_format", DT_STRING, R_INDEX|R_PAGER, &C_StatusFormat, IP "-%r-NeoMutt: %D [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" },
+ { "status_format", DT_STRING|R_INDEX|R_PAGER, 0, &C_StatusFormat, IP "-%r-NeoMutt: %D [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" },
/*
** .pp
** Controls the format of the status line displayed in the "index"
** will replace any dots in the expansion by underscores. This might be helpful
** with IMAP folders that don't like dots in folder names.
*/
- { "status_on_top", DT_BOOL, R_REFLOW, &C_StatusOnTop, false },
+ { "status_on_top", DT_BOOL|R_REFLOW, 0, &C_StatusOnTop, false },
/*
** .pp
** Setting this variable causes the "status bar" to be displayed on
** the first line of the screen rather than near the bottom. If $$help
** is \fIset\fP, too it'll be placed at the bottom.
*/
- { "strict_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, &C_StrictThreads, false, pager_validator },
+ { "strict_threads", DT_BOOL|R_RESORT|R_RESORT_INIT|R_INDEX, 0, &C_StrictThreads, false, pager_validator },
/*
** .pp
** If \fIset\fP, threading will only make use of the "In-Reply-To" and
** $$sort_re for a less drastic way of controlling this
** behavior.
*/
- { "suspend", DT_BOOL, R_NONE, &C_Suspend, true },
+ { "suspend", DT_BOOL, 0, &C_Suspend, true },
/*
** .pp
** When \fIunset\fP, NeoMutt won't stop when the user presses the terminal's
** \fIsusp\fP key, usually "^Z". This is useful if you run NeoMutt
** inside an xterm using a command like "\fCxterm -e neomutt\fP".
*/
- { "text_flowed", DT_BOOL, R_NONE, &C_TextFlowed, false },
+ { "text_flowed", DT_BOOL, 0, &C_TextFlowed, false },
/*
** .pp
** When \fIset\fP, NeoMutt will generate "format=flowed" bodies with a content type
** .pp
** Note that $$indent_string is ignored when this option is \fIset\fP.
*/
- { "thorough_search", DT_BOOL, R_NONE, &C_ThoroughSearch, true },
+ { "thorough_search", DT_BOOL, 0, &C_ThoroughSearch, true },
/*
** .pp
** Affects the \fC~b\fP and \fC~h\fP search operations described in
** raw message received (for example quoted-printable encoded or with encoded
** headers) which may lead to incorrect search results.
*/
- { "thread_received", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, &C_ThreadReceived, false, pager_validator },
+ { "thread_received", DT_BOOL|R_RESORT|R_RESORT_INIT|R_INDEX, 0, &C_ThreadReceived, false, pager_validator },
/*
** .pp
** When \fIset\fP, NeoMutt uses the date received rather than the date sent
** to thread messages by subject.
*/
- { "tilde", DT_BOOL, R_PAGER, &C_Tilde, false },
+ { "tilde", DT_BOOL|R_PAGER, 0, &C_Tilde, false },
/*
** .pp
** When \fIset\fP, the internal-pager will pad blank lines to the bottom of the
** screen with a tilde ("~").
*/
- { "time_inc", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_TimeInc, 0 },
+ { "time_inc", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_TimeInc, 0 },
/*
** .pp
** Along with $$read_inc, $$write_inc, and $$net_inc, this
** .pp
** Also see the "$tuning" section of the manual for performance considerations.
*/
- { "timeout", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_Timeout, 600 },
+ { "timeout", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_Timeout, 600 },
/*
** .pp
** When NeoMutt is waiting for user input either idling in menus or
** .pp
** A value of zero or less will cause NeoMutt to never time out.
*/
- { "tmpdir", DT_PATH, R_NONE, &C_Tmpdir, IP "/tmp" },
+ { "tmpdir", DT_PATH, 0, &C_Tmpdir, IP "/tmp" },
/*
** .pp
** This variable allows you to specify where NeoMutt will place its
** If this variable is not set, the environment variable \fC$$$TMPDIR\fP is
** used. Failing that, then "\fC/tmp\fP" is used.
*/
- { "to_chars", DT_MBTABLE, R_INDEX|R_PAGER, &C_ToChars, IP " +TCFLR" },
+ { "to_chars", DT_MBTABLE|R_INDEX|R_PAGER, 0, &C_ToChars, IP " +TCFLR" },
/*
** .pp
** Controls the character used to indicate mail addressed to you.
** .dt 7 .dd R .dd Your address appears in the "Reply-To:" header field but none of the above applies.
** .de
*/
- { "trash", DT_PATH|DT_MAILBOX, R_NONE, &C_Trash, 0 },
+ { "trash", DT_PATH|DT_MAILBOX, 0, &C_Trash, 0 },
/*
** .pp
** If set, this variable specifies the path of the trash folder where the
** NOTE: When you delete a message in the trash folder, it is really
** deleted, so that you have a way to clean the trash.
*/
- { "ts_enabled", DT_BOOL, R_INDEX|R_PAGER, &C_TsEnabled, false },
+ { "ts_enabled", DT_BOOL|R_INDEX|R_PAGER, 0, &C_TsEnabled, false },
/* The default must be off to force in the validity checking. */
/*
** .pp
** Controls whether NeoMutt tries to set the terminal status line and icon name.
** Most terminal emulators emulate the status line in the window title.
*/
- { "ts_icon_format", DT_STRING, R_INDEX|R_PAGER, &C_TsIconFormat, IP "M%?n?AIL&ail?" },
+ { "ts_icon_format", DT_STRING|R_INDEX|R_PAGER, 0, &C_TsIconFormat, IP "M%?n?AIL&ail?" },
/*
** .pp
** Controls the format of the icon title, as long as "$$ts_enabled" is set.
** This string is identical in formatting to the one used by
** "$$status_format".
*/
- { "ts_status_format", DT_STRING, R_INDEX|R_PAGER, &C_TsStatusFormat, IP "NeoMutt with %?m?%m messages&no messages?%?n? [%n NEW]?" },
+ { "ts_status_format", DT_STRING|R_INDEX|R_PAGER, 0, &C_TsStatusFormat, IP "NeoMutt with %?m?%m messages&no messages?%?n? [%n NEW]?" },
/*
** .pp
** Controls the format of the terminal status line (or window title),
** formatting to the one used by "$$status_format".
*/
#ifdef USE_SOCKET
- { "tunnel", DT_STRING, R_NONE, &C_Tunnel, 0 },
+ { "tunnel", DT_STRING, 0, &C_Tunnel, 0 },
/*
** .pp
** Setting this variable will cause NeoMutt to open a pipe to a command
** tunnel commands per connection.
*/
#endif
- { "uncollapse_jump", DT_BOOL, R_NONE, &C_UncollapseJump, false },
+ { "uncollapse_jump", DT_BOOL, 0, &C_UncollapseJump, false },
/*
** .pp
** When \fIset\fP, NeoMutt will jump to the next unread message, if any,
** when the current thread is \fIun\fPcollapsed.
*/
- { "uncollapse_new", DT_BOOL, R_NONE, &C_UncollapseNew, true },
+ { "uncollapse_new", DT_BOOL, 0, &C_UncollapseNew, true },
/*
** .pp
** When \fIset\fP, NeoMutt will automatically uncollapse any collapsed thread
** remain collapsed. the presence of the new message will still affect
** index sorting, though.
*/
- { "use_8bitmime", DT_BOOL, R_NONE, &C_Use8bitmime, false },
+ { "use_8bitmime", DT_BOOL, 0, &C_Use8bitmime, false },
/*
** .pp
** \fBWarning:\fP do not set this variable unless you are using a version
** When \fIset\fP, NeoMutt will invoke $$sendmail with the \fC-B8BITMIME\fP
** flag when sending 8-bit messages to enable ESMTP negotiation.
*/
- { "use_domain", DT_BOOL, R_NONE, &C_UseDomain, true },
+ { "use_domain", DT_BOOL, 0, &C_UseDomain, true },
/*
** .pp
** When \fIset\fP, NeoMutt will qualify all local addresses (ones without the
** "@host" portion) with the value of $$hostname. If \fIunset\fP, no
** addresses will be qualified.
*/
- { "use_envelope_from", DT_BOOL, R_NONE, &C_UseEnvelopeFrom, false },
+ { "use_envelope_from", DT_BOOL, 0, &C_UseEnvelopeFrom, false },
/*
** .pp
** When \fIset\fP, NeoMutt will set the \fIenvelope\fP sender of the message.
** if the $$sendmail variable already contains \fC-f\fP or if the
** executable pointed to by $$sendmail doesn't support the \fC-f\fP switch.
*/
- { "use_from", DT_BOOL, R_NONE, &C_UseFrom, true },
+ { "use_from", DT_BOOL, 0, &C_UseFrom, true },
/*
** .pp
** When \fIset\fP, NeoMutt will generate the "From:" header field when
** command.
*/
#ifdef HAVE_GETADDRINFO
- { "use_ipv6", DT_BOOL, R_NONE, &C_UseIpv6, true },
+ { "use_ipv6", DT_BOOL, 0, &C_UseIpv6, true },
/*
** .pp
** When \fIset\fP, NeoMutt will look for IPv6 addresses of hosts it tries to
** Normally, the default should work.
*/
#endif /* HAVE_GETADDRINFO */
- { "user_agent", DT_BOOL, R_NONE, &C_UserAgent, true },
+ { "user_agent", DT_BOOL, 0, &C_UserAgent, true },
/*
** .pp
** When \fIset\fP, NeoMutt will add a "User-Agent:" header to outgoing
** them.
*/
#ifdef USE_NOTMUCH
- { "vfolder_format", DT_STRING|DT_NOT_EMPTY, R_INDEX, &C_VfolderFormat, IP "%2C %?n?%4n/& ?%4m %f" },
+ { "vfolder_format", DT_STRING|DT_NOT_EMPTY|R_INDEX, 0, &C_VfolderFormat, IP "%2C %?n?%4n/& ?%4m %f" },
/*
** .pp
** This variable allows you to customize the file browser display for virtual
** folders to your personal taste. This string uses many of the same
** expandos as $$folder_format.
*/
- { "virtual_spoolfile", DT_BOOL, R_NONE, &C_VirtualSpoolfile, false },
+ { "virtual_spoolfile", DT_BOOL, 0, &C_VirtualSpoolfile, false },
/*
** .pp
** When \fIset\fP, NeoMutt will use the first defined virtual mailbox (see
** mailbox descriptions as a value.
*/
#endif
- { "visual", DT_COMMAND, R_NONE, &C_Visual, IP "vi" },
+ { "visual", DT_COMMAND, 0, &C_Visual, IP "vi" },
/*
** .pp
** Specifies the visual editor to invoke when the "\fC~v\fP" command is
** .pp
** $$visual is overridden by the environment variable \fC$$$VISUAL\fP or \fC$$$EDITOR\fP.
*/
- { "wait_key", DT_BOOL, R_NONE, &C_WaitKey, true },
+ { "wait_key", DT_BOOL, 0, &C_WaitKey, true },
/*
** .pp
** Controls whether NeoMutt will ask you to press a key after an external command
** When \fIset\fP, NeoMutt will always ask for a key. When \fIunset\fP, NeoMutt will wait
** for a key only if the external command returned a non-zero status.
*/
- { "weed", DT_BOOL, R_NONE, &C_Weed, true },
+ { "weed", DT_BOOL, 0, &C_Weed, true },
/*
** .pp
** When \fIset\fP, NeoMutt will weed headers when displaying, forwarding,
** printing, or replying to messages.
*/
- { "wrap", DT_NUMBER, R_PAGER_FLOW, &C_Wrap, 0 },
+ { "wrap", DT_NUMBER|R_PAGER_FLOW, 0, &C_Wrap, 0 },
/*
** .pp
** When set to a positive value, NeoMutt will wrap text at $$wrap characters.
** .pp
** Also see $$reflow_wrap.
*/
- { "wrap_headers", DT_NUMBER|DT_NOT_NEGATIVE, R_PAGER, &C_WrapHeaders, 78 },
+ { "wrap_headers", DT_NUMBER|DT_NOT_NEGATIVE|R_PAGER, 0, &C_WrapHeaders, 78 },
/*
** .pp
** This option specifies the number of characters to use for wrapping
** recommends a line length of 78 (the default), so \fBplease only change
** this setting when you know what you're doing\fP.
*/
- { "wrap_search", DT_BOOL, R_NONE, &C_WrapSearch, true },
+ { "wrap_search", DT_BOOL, 0, &C_WrapSearch, true },
/*
** .pp
** Controls whether searches wrap around the end.
** When \fIset\fP, searches will wrap around the first (or last) item. When
** \fIunset\fP, incremental searches will not wrap.
*/
- { "write_bcc", DT_BOOL, R_NONE, &C_WriteBcc, true },
+ { "write_bcc", DT_BOOL, 0, &C_WriteBcc, true },
/*
** .pp
** Controls whether NeoMutt writes out the "Bcc:" header when preparing
** option does nothing: NeoMutt will never write out the "Bcc:" header
** in this case.
*/
- { "write_inc", DT_NUMBER|DT_NOT_NEGATIVE, R_NONE, &C_WriteInc, 10 },
+ { "write_inc", DT_NUMBER|DT_NOT_NEGATIVE, 0, &C_WriteInc, 10 },
/*
** .pp
** When writing a mailbox, a message will be printed every
** "$tuning" section of the manual for performance considerations.
*/
#ifdef USE_NNTP
- { "x_comment_to", DT_BOOL, R_NONE, &C_XCommentTo, false },
+ { "x_comment_to", DT_BOOL, 0, &C_XCommentTo, false },
/*
** .pp
** If \fIset\fP, NeoMutt will add "X-Comment-To:" field (that contains full
#endif
/*--*/
- { "ignore_linear_white_space", DT_BOOL, R_NONE, &C_IgnoreLinearWhiteSpace, false },
- { "pgp_encrypt_self", DT_QUAD, R_NONE, &C_PgpEncryptSelf, MUTT_NO },
- { "smime_encrypt_self", DT_QUAD, R_NONE, &C_SmimeEncryptSelf, MUTT_NO },
- { "wrapmargin", DT_NUMBER, R_PAGER, &C_Wrap, 0 },
+ { "ignore_linear_white_space", DT_BOOL, 0, &C_IgnoreLinearWhiteSpace, false },
+ { "pgp_encrypt_self", DT_QUAD, 0, &C_PgpEncryptSelf, MUTT_NO },
+ { "smime_encrypt_self", DT_QUAD, 0, &C_SmimeEncryptSelf, MUTT_NO },
+ { "wrapmargin", DT_NUMBER|R_PAGER, 0, &C_Wrap, 0 },
- { "abort_noattach_regexp", DT_SYNONYM, R_NONE, NULL, IP "abort_noattach_regex", },
- { "attach_keyword", DT_SYNONYM, R_NONE, NULL, IP "abort_noattach_regex", },
- { "edit_hdrs", DT_SYNONYM, R_NONE, NULL, IP "edit_headers", },
- { "envelope_from", DT_SYNONYM, R_NONE, NULL, IP "use_envelope_from", },
- { "forw_decode", DT_SYNONYM, R_NONE, NULL, IP "forward_decode", },
- { "forw_decrypt", DT_SYNONYM, R_NONE, NULL, IP "forward_decrypt", },
- { "forw_format", DT_SYNONYM, R_NONE, NULL, IP "forward_format", },
- { "forw_quote", DT_SYNONYM, R_NONE, NULL, IP "forward_quote", },
- { "hdr_format", DT_SYNONYM, R_NONE, NULL, IP "index_format", },
- { "indent_str", DT_SYNONYM, R_NONE, NULL, IP "indent_string", },
- { "mime_fwd", DT_SYNONYM, R_NONE, NULL, IP "mime_forward", },
- { "msg_format", DT_SYNONYM, R_NONE, NULL, IP "message_format", },
- { "pgp_autoencrypt", DT_SYNONYM, R_NONE, NULL, IP "crypt_autoencrypt", },
- { "pgp_autosign", DT_SYNONYM, R_NONE, NULL, IP "crypt_autosign", },
- { "pgp_auto_traditional", DT_SYNONYM, R_NONE, NULL, IP "pgp_replyinline", },
- { "pgp_create_traditional", DT_SYNONYM, R_NONE, NULL, IP "pgp_autoinline", },
- { "pgp_replyencrypt", DT_SYNONYM, R_NONE, NULL, IP "crypt_replyencrypt", },
- { "pgp_replysign", DT_SYNONYM, R_NONE, NULL, IP "crypt_replysign", },
- { "pgp_replysignencrypted", DT_SYNONYM, R_NONE, NULL, IP "crypt_replysignencrypted", },
- { "pgp_self_encrypt_as", DT_SYNONYM, R_NONE, NULL, IP "pgp_default_key", },
- { "pgp_verify_sig", DT_SYNONYM, R_NONE, NULL, IP "crypt_verify_sig", },
- { "post_indent_str", DT_SYNONYM, R_NONE, NULL, IP "post_indent_string", },
- { "print_cmd", DT_SYNONYM, R_NONE, NULL, IP "print_command", },
- { "quote_regexp", DT_SYNONYM, R_NONE, NULL, IP "quote_regex", },
- { "reply_regexp", DT_SYNONYM, R_NONE, NULL, IP "reply_regex", },
- { "smime_self_encrypt_as", DT_SYNONYM, R_NONE, NULL, IP "smime_default_key", },
- { "xterm_icon", DT_SYNONYM, R_NONE, NULL, IP "ts_icon_format", },
- { "xterm_set_titles", DT_SYNONYM, R_NONE, NULL, IP "ts_enabled", },
- { "xterm_title", DT_SYNONYM, R_NONE, NULL, IP "ts_status_format", },
+ { "abort_noattach_regexp", DT_SYNONYM, 0, NULL, IP "abort_noattach_regex", },
+ { "attach_keyword", DT_SYNONYM, 0, NULL, IP "abort_noattach_regex", },
+ { "edit_hdrs", DT_SYNONYM, 0, NULL, IP "edit_headers", },
+ { "envelope_from", DT_SYNONYM, 0, NULL, IP "use_envelope_from", },
+ { "forw_decode", DT_SYNONYM, 0, NULL, IP "forward_decode", },
+ { "forw_decrypt", DT_SYNONYM, 0, NULL, IP "forward_decrypt", },
+ { "forw_format", DT_SYNONYM, 0, NULL, IP "forward_format", },
+ { "forw_quote", DT_SYNONYM, 0, NULL, IP "forward_quote", },
+ { "hdr_format", DT_SYNONYM, 0, NULL, IP "index_format", },
+ { "indent_str", DT_SYNONYM, 0, NULL, IP "indent_string", },
+ { "mime_fwd", DT_SYNONYM, 0, NULL, IP "mime_forward", },
+ { "msg_format", DT_SYNONYM, 0, NULL, IP "message_format", },
+ { "pgp_autoencrypt", DT_SYNONYM, 0, NULL, IP "crypt_autoencrypt", },
+ { "pgp_autosign", DT_SYNONYM, 0, NULL, IP "crypt_autosign", },
+ { "pgp_auto_traditional", DT_SYNONYM, 0, NULL, IP "pgp_replyinline", },
+ { "pgp_create_traditional", DT_SYNONYM, 0, NULL, IP "pgp_autoinline", },
+ { "pgp_replyencrypt", DT_SYNONYM, 0, NULL, IP "crypt_replyencrypt", },
+ { "pgp_replysign", DT_SYNONYM, 0, NULL, IP "crypt_replysign", },
+ { "pgp_replysignencrypted", DT_SYNONYM, 0, NULL, IP "crypt_replysignencrypted", },
+ { "pgp_self_encrypt_as", DT_SYNONYM, 0, NULL, IP "pgp_default_key", },
+ { "pgp_verify_sig", DT_SYNONYM, 0, NULL, IP "crypt_verify_sig", },
+ { "post_indent_str", DT_SYNONYM, 0, NULL, IP "post_indent_string", },
+ { "print_cmd", DT_SYNONYM, 0, NULL, IP "print_command", },
+ { "quote_regexp", DT_SYNONYM, 0, NULL, IP "quote_regex", },
+ { "reply_regexp", DT_SYNONYM, 0, NULL, IP "reply_regex", },
+ { "smime_self_encrypt_as", DT_SYNONYM, 0, NULL, IP "smime_default_key", },
+ { "xterm_icon", DT_SYNONYM, 0, NULL, IP "ts_icon_format", },
+ { "xterm_set_titles", DT_SYNONYM, 0, NULL, IP "ts_enabled", },
+ { "xterm_title", DT_SYNONYM, 0, NULL, IP "ts_status_format", },
{ NULL, 0, 0, 0, 0 },
};
projects / neomutt / commitdiff