Standardize handling of #ifdef'd options.

Here are the "rules" for handling flags that depend on #ifdef:

- Do not ifdef the enum.  Only ifdef the OPTIONS table.  All ifdef'd
  entries appear at the end; by convention "engine" is last.  This
  ensures that at run-time, the flag will never be recognized/allowed.
  The next two bullets entries are for silencing compiler warnings:
- In the while/switch parsing statement, use #ifdef for the body to
  disable it; leave the "case OPT_xxx:" and "break" statements outside
  the ifdef/ifndef.  See ciphers.c for example.
- If there are multiple options controlled by a single guard, OPT_FOO,
  OPT_BAR, etc., put a an #ifdef around the set, and then do "#else"
  and a series of case labels and a break. See OPENSSL_NO_AES in cms.c
  for example.

Reviewed-by: Matt Caswell <matt@openssl.org>

diff --git a/apps/ciphers.c b/apps/ciphers.c
index b1b3bddd76dd28df1892623ebc4aea527b4309a0..a2ccf2842d81e417e7724f6a3a433385954c4192 100644 (file)
--- a/apps/ciphers.c
+++ b/apps/ciphers.c
@@ -64,12 +64,8 @@
 
 typedef enum OPTION_choice {
     OPT_ERR = -1, OPT_EOF = 0, OPT_HELP,
-#ifndef OPENSSL_NO_SSL_TRACE
     OPT_STDNAME,
-#endif
-#ifndef OPENSSL_NO_SSL3
     OPT_SSL3,
-#endif
     OPT_TLS1,
     OPT_V, OPT_UPPER_V, OPT_S
 } OPTION_CHOICE;
@@ -79,13 +75,13 @@ OPTIONS ciphers_options[] = {
     {"v", OPT_V, '-', "Verbose listing of the SSL/TLS ciphers"},
     {"V", OPT_UPPER_V, '-', "Even more verbose"},
     {"s", OPT_S, '-', "Only supported ciphers"},
+    {"tls1", OPT_TLS1, '-', "TLS1 mode"},
 #ifndef OPENSSL_NO_SSL_TRACE
     {"stdname", OPT_STDNAME, '-', "Show standard cipher names"},
 #endif
 #ifndef OPENSSL_NO_SSL3
     {"ssl3", OPT_SSL3, '-', "SSL3 mode"},
 #endif
-    {"tls1", OPT_TLS1, '-', "TLS1 mode"},
     {NULL}
 };
 
@@ -125,16 +121,16 @@ int ciphers_main(int argc, char **argv)
         case OPT_S:
             use_supported = 1;
             break;
-#ifndef OPENSSL_NO_SSL_TRACE
         case OPT_STDNAME:
+#ifndef OPENSSL_NO_SSL_TRACE
             stdname = verbose = 1;
-            break;
 #endif
-#ifndef OPENSSL_NO_SSL3
+            break;
         case OPT_SSL3:
+#ifndef OPENSSL_NO_SSL3
             meth = SSLv3_client_method();
-            break;
 #endif
+            break;
         case OPT_TLS1:
             meth = TLSv1_client_method();
             break;

diff --git a/apps/cms.c b/apps/cms.c
index 7ccca5be9644ebacc5c049049a3832c1df3043ce..e40686b5d4b38a67b280502a7b8a53ca0498a785 100644 (file)
--- a/apps/cms.c
+++ b/apps/cms.c
@@ -208,6 +208,8 @@ OPTIONS cms_options[] = {
     {"keyopt", OPT_KEYOPT, 's', "Set public key parameters as n:v pairs"},
     {"receipt_request_from", OPT_RR_FROM, 's'},
     {"receipt_request_to", OPT_RR_TO, 's'},
+    {"", OPT_CIPHER, '-', "Any supported cipher"},
+    OPT_V_OPTIONS,
 # ifndef OPENSSL_NO_AES
     {"aes128-wrap", OPT_AES128_WRAP, '-', "Use AES128 to wrap key"},
     {"aes192-wrap", OPT_AES192_WRAP, '-', "Use AES192 to wrap key"},
@@ -219,9 +221,7 @@ OPTIONS cms_options[] = {
 # ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
 # endif
-    {"", OPT_CIPHER, '-', "Any supported cipher"},
-    OPT_V_OPTIONS,
-    {NULL},
+    {NULL}
 };
 
 int cms_main(int argc, char **argv)
@@ -588,11 +588,11 @@ int cms_main(int argc, char **argv)
                 goto end;
             vpmtouched++;
             break;
-# ifndef OPENSSL_NO_DES
         case OPT_3DES_WRAP:
+# ifndef OPENSSL_NO_DES
             wrap_cipher = EVP_des_ede3_wrap();
-            break;
 # endif
+            break;
 # ifndef OPENSSL_NO_AES
         case OPT_AES128_WRAP:
             wrap_cipher = EVP_aes_128_wrap();
@@ -603,6 +603,11 @@ int cms_main(int argc, char **argv)
         case OPT_AES256_WRAP:
             wrap_cipher = EVP_aes_256_wrap();
             break;
+# else
+        case OPT_AES128_WRAP:
+        case OPT_AES192_WRAP:
+        case OPT_AES256_WRAP:
+            break;
 # endif
         }
     }

diff --git a/apps/crl.c b/apps/crl.c
index 17391e24c038931aff0287ba76424c4060488dbb..c897335fb7d3d1da1c608a37531924fb67c0594c 100644 (file)
--- a/apps/crl.c
+++ b/apps/crl.c
@@ -95,11 +95,11 @@ OPTIONS crl_options[] = {
     {"verify", OPT_VERIFY, '-'},
     {"text", OPT_TEXT, '-', "Print out a text format version"},
     {"hash", OPT_HASH, '-', "Print hash value"},
+    {"nameopt", OPT_NAMEOPT, 's', "Various certificate name options"},
+    {"", OPT_MD, '-', "Any supported digest"},
 #ifndef OPENSSL_NO_MD5
     {"hash_old", OPT_HASH_OLD, '-', "Print old-style (MD5) hash value"},
 #endif
-    {"nameopt", OPT_NAMEOPT, 's', "Various certificate name options"},
-    {"", OPT_MD, '-', "Any supported digest"},
     {NULL}
 };
 
@@ -117,11 +117,11 @@ int crl_main(int argc, char **argv)
     char *infile = NULL, *outfile = NULL, *crldiff = NULL, *keyfile = NULL;
     char *CAfile = NULL, *CApath = NULL, *prog;
     OPTION_CHOICE o;
-    int hash = 0, issuer = 0, lastupdate = 0, nextupdate = 0, noout =
-        0, text = 0;
+    int hash = 0, issuer = 0, lastupdate = 0, nextupdate = 0, noout = 0;
     int informat = FORMAT_PEM, outformat = FORMAT_PEM, keyformat = FORMAT_PEM;
-    int ret = 1, num = 0, badsig = 0, fingerprint = 0, crlnumber =
-        0, i, do_ver = 0;
+    int ret = 1, num = 0, badsig = 0, fingerprint = 0, crlnumber = 0;
+    int text = 0, do_ver = 0;
+    int i;
 #ifndef OPENSSL_NO_MD5
     int hash_old = 0;
 #endif
@@ -170,11 +170,11 @@ int crl_main(int argc, char **argv)
             CAfile = opt_arg();
             do_ver = 1;
             break;
-#ifndef OPENSSL_NO_MD5
         case OPT_HASH_OLD:
+#ifndef OPENSSL_NO_MD5
             hash_old = ++num;
-            break;
 #endif
+            break;
         case OPT_VERIFY:
             do_ver = 1;
             break;

diff --git a/apps/dgst.c b/apps/dgst.c
index 308555c46d7cbd4ef1e489709fcfef32ed351e6e..e6142caaffca21e791949a5f6e489a159705ff0e 100644 (file)
--- a/apps/dgst.c
+++ b/apps/dgst.c
@@ -111,11 +111,11 @@ OPTIONS dgst_options[] = {
     {"mac", OPT_MAC, 's', "Create MAC (not neccessarily HMAC)"},
     {"sigop", OPT_SIGOPT, 's', "Signature parameter in n:v form"},
     {"macop", OPT_MACOPT, 's', "MAC algorithm parameters in n:v form or key"},
+    {"", OPT_DIGEST, '-', "Any supported digest"},
 #ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
     {"engine_impl", OPT_ENGINE_IMPL, '-'},
 #endif
-    {"", OPT_DIGEST, '-', "Any supported digest"},
     {NULL}
 };
 

diff --git a/apps/dhparam.c b/apps/dhparam.c
index 931bf10226b676302cbc3a20f26c6119486c542d..2e5ce2c6d34be483c14d4eaf9023ff731b354eb9 100644 (file)
--- a/apps/dhparam.c
+++ b/apps/dhparam.c
@@ -153,12 +153,12 @@ OPTIONS dhparam_options[] = {
     {"C", OPT_C, '-', "Print C code"},
     {"2", OPT_2, '-', "Generate parameters using 2 as the generator value"},
     {"5", OPT_5, '-', "Generate parameters using 5 as the generator value"},
-# ifndef OPENSSL_NO_ENGINE
-    {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
-# endif
 # ifndef OPENSSL_NO_DSA
     {"dsaparam", OPT_DSAPARAM, '-',
      "Read or generate DSA parameters, convert to DH"},
+# endif
+# ifndef OPENSSL_NO_ENGINE
+    {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
 # endif
     {NULL}
 };

diff --git a/apps/dsa.c b/apps/dsa.c
index f02f29399ab77dfcaf0c030663f68879a27729b4..f61e151f88864fa7f2a28903546971fb358a67d6 100644 (file)
--- a/apps/dsa.c
+++ b/apps/dsa.c
@@ -82,14 +82,8 @@ OPTIONS dsa_options[] = {
     {"help", OPT_HELP, '-', "Display this summary"},
     {"inform", OPT_INFORM, 'F', "Input format, DER PEM PVK"},
     {"outform", OPT_OUTFORM, 'F', "Output format, DER PEM PVK"},
-# ifndef OPENSSL_NO_ENGINE
-    {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
-# endif
     {"in", OPT_IN, '<', "Input file"},
     {"out", OPT_OUT, '>', "Output file"},
-    {"pvk-strong", OPT_PVK_STRONG, '-'},
-    {"pvk-weak", OPT_PVK_WEAK, '-'},
-    {"pvk-none", OPT_PVK_NONE, '-'},
     {"noout", OPT_NOOUT, '-', "Don't print key out"},
     {"text", OPT_TEXT, '-', "Print the key in text"},
     {"modulus", OPT_MODULUS, '-', "Print the DSA public value"},
@@ -98,6 +92,14 @@ OPTIONS dsa_options[] = {
     {"passin", OPT_PASSIN, 's', "Input file pass phrase source"},
     {"passout", OPT_PASSOUT, 's', "Output file pass phrase source"},
     {"", OPT_CIPHER, '-', "Any supported cipher"},
+# ifndef OPENSSL_NO_RC4
+    {"pvk-strong", OPT_PVK_STRONG, '-'},
+    {"pvk-weak", OPT_PVK_WEAK, '-'},
+    {"pvk-none", OPT_PVK_NONE, '-'},
+# endif
+# ifndef OPENSSL_NO_ENGINE
+    {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
+# endif
     {NULL}
 };
 
@@ -118,11 +120,6 @@ int dsa_main(int argc, char **argv)
         switch (o) {
         case OPT_EOF:
         case OPT_ERR:
-#ifdef OPENSSL_NO_RC4
-        case OPT_PVK_STRONG:
-        case OPT_PVK_WEAK:
-        case OPT_PVK_NONE:
-#endif
  opthelp:
             ret = 0;
             BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
@@ -166,6 +163,11 @@ int dsa_main(int argc, char **argv)
         case OPT_PVK_NONE:
             pvk_encr = 0;
             break;
+#else
+        case OPT_PVK_STRONG:
+        case OPT_PVK_WEAK:
+        case OPT_PVK_NONE:
+            break;
 #endif
         case OPT_NOOUT:
             noout = 1;

diff --git a/apps/dsaparam.c b/apps/dsaparam.c
index ffd81ff7e585c2ec4e9d56830122c24344d3ceba..27170a22a29ca619c6cb2ec4185ba9b1b3851cbb 100644 (file)
--- a/apps/dsaparam.c
+++ b/apps/dsaparam.c
@@ -103,11 +103,11 @@ OPTIONS dsaparam_options[] = {
     {"genkey", OPT_GENKEY, '-', "Generate a DSA key"},
     {"rand", OPT_RAND, 's', "Files to use for random number input"},
     {"non-fips-allow", OPT_NON_FIPS_ALLOW, '-'},
-# ifndef OPENSSL_NO_ENGINE
-    {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
-# endif
 # ifdef GENCB_TEST
     {"timebomb", OPT_TIMEBOMB, 'p', "Interrupt keygen after 'pnum' seconds"},
+# endif
+# ifndef OPENSSL_NO_ENGINE
+    {"engine", OPT_ENGINE, 's', "Use engine e, possibly a hardware device"},
 # endif
     {NULL}
 };

diff --git a/apps/ec.c b/apps/ec.c
index 83a6aa4bab769910ce67995521c7daa958740d95..341243ff284775755f1e1339abcfa13ae3229fd9 100644 (file)
--- a/apps/ec.c
+++ b/apps/ec.c
@@ -92,9 +92,6 @@ OPTIONS ec_options[] = {
     {"inform", OPT_INFORM, 'F', "Input format - DER or PEM"},
     {"out", OPT_OUT, '>', "Output file"},
     {"outform", OPT_OUTFORM, 'F', "Output format - DER or PEM"},
-# ifndef OPENSSL_NO_ENGINE
-    {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
-# endif
     {"noout", OPT_NOOUT, '-', "Don't print key out"},
     {"text", OPT_TEXT, '-', "Print the key"},
     {"param_out", OPT_PARAM_OUT, '-', "Print the elliptic curve parameters"},
@@ -106,6 +103,9 @@ OPTIONS ec_options[] = {
      "Specifies the way the ec parameters are encoded"},
     {"conv_form", OPT_CONV_FORM, 's', "Specifies the point conversion form "},
     {"", OPT_CIPHER, '-', "Any supported cipher"},
+# ifndef OPENSSL_NO_ENGINE
+    {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
+# endif
     {NULL}
 };
 

diff --git a/apps/enc.c b/apps/enc.c
index d045d159651627bb8ba56ed4170551020b023f93..628142a9f40daae8aaec28dea29b90bf9cb110ba 100644 (file)
--- a/apps/enc.c
+++ b/apps/enc.c
@@ -92,9 +92,6 @@ OPTIONS enc_options[] = {
     {"in", OPT_IN, '<', "Input file"},
     {"out", OPT_OUT, '>', "Output file"},
     {"pass", OPT_PASS, 's', "Passphrase source"},
-#ifndef OPENSSL_NO_ENGINE
-    {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
-#endif
     {"e", OPT_E, '-', "Encrypt"},
     {"d", OPT_D, '-', "Decrypt"},
     {"p", OPT_P, '-', "Print the iv/key"},
@@ -107,9 +104,6 @@ OPTIONS enc_options[] = {
     {"A", OPT_UPPER_A, '-'},
     {"a", OPT_A, '-', "base64 encode/decode, depending on encryption flag"},
     {"base64", OPT_A, '-', "Base64 output as a single line"},
-#ifdef ZLIB
-    {"z", OPT_Z, '-', "Use zlib as the 'encryption'"},
-#endif
     {"bufsize", OPT_BUFSIZE, 's', "Buffer size"},
     {"k", OPT_K, 's', "Passphrase"},
     {"kfile", OPT_KFILE, '<', "Fead passphrase from file"},
@@ -120,6 +114,12 @@ OPTIONS enc_options[] = {
     {"non-fips-allow", OPT_NON_FIPS_ALLOW, '-'},
     {"none", OPT_NONE, '-', "Don't encrypt"},
     {"", OPT_CIPHER, '-', "Any supported cipher"},
+#ifdef ZLIB
+    {"z", OPT_Z, '-', "Use zlib as the 'encryption'"},
+#endif
+#ifndef OPENSSL_NO_ENGINE
+    {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
+#endif
     {NULL}
 };
 

diff --git a/apps/gendsa.c b/apps/gendsa.c
index a832ec3ded727ab800815b778ee8ec3dcb4e9c3f..01bbcebf0eeae73f422ef2f6c4b56182ec0039ff 100644 (file)
--- a/apps/gendsa.c
+++ b/apps/gendsa.c
@@ -84,10 +84,10 @@ OPTIONS gendsa_options[] = {
     {"passout", OPT_PASSOUT, 's'},
     {"rand", OPT_RAND, 's',
      "Load the file(s) into the random number generator"},
+    {"", OPT_CIPHER, '-', "Encrypt the output with any supported cipher"},
 # ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 # endif
-    {"", OPT_CIPHER, '-', "Encrypt the output with any supported cipher"},
     {NULL}
 };
 

diff --git a/apps/genpkey.c b/apps/genpkey.c
index b9843cfef7b078770cafe773cb99886ca5199ea4..7c8d5518276ed5436c50978e3307e1e042e621f4 100644 (file)
--- a/apps/genpkey.c
+++ b/apps/genpkey.c
@@ -89,6 +89,7 @@ OPTIONS genpkey_options[] = {
 #ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 #endif
+    /* This is deliberately last. */
     {OPT_HELP_STR, 1, 1,
      "Order of options may be important!  See the documentation.\n"},
     {NULL}

diff --git a/apps/passwd.c b/apps/passwd.c
index f34ef9f5343655a7e08451162267c4df79770922..2e376290d0018e650970a773a2d8e4c1a1775625 100644 (file)
--- a/apps/passwd.c
+++ b/apps/passwd.c
@@ -101,6 +101,8 @@ OPTIONS passwd_options[] = {
     {"quiet", OPT_QUIET, '-', "No warnings"},
     {"table", OPT_TABLE, '-', "Format output as table"},
     {"reverse", OPT_REVERSE, '-', "Switch table columns"},
+    {"salt", OPT_SALT, 's', "Use provided salt"},
+    {"stdin", OPT_STDIN, '-', "Read passwords from stdin"},
 # ifndef NO_MD5CRYPT_1
     {"apr1", OPT_APR1, '-', "MD5-based password algorithm, Apache variant"},
     {"1", OPT_1, '-', "MD5-based password algorithm"},
@@ -108,8 +110,6 @@ OPTIONS passwd_options[] = {
 # ifndef OPENSSL_NO_DES
     {"crypt", OPT_CRYPT, '-', "Standard Unix password algorithm (default)"},
 # endif
-    {"salt", OPT_SALT, 's', "Use provided salt"},
-    {"stdin", OPT_STDIN, '-', "Read passwords from stdin"},
     {NULL}
 };
 

diff --git a/apps/pkcs12.c b/apps/pkcs12.c
index 82131e8527c9491b64eada02ba195a23efc6bafa..9ab7f69160b78c6141ba6a9bed14351921ea974d 100644 (file)
--- a/apps/pkcs12.c
+++ b/apps/pkcs12.c
@@ -149,10 +149,10 @@ OPTIONS pkcs12_options[] = {
     {"password", OPT_PASSWORD, 's', "Set import/export password source"},
     {"CApath", OPT_CAPATH, '/', "PEM-format directory of CA's"},
     {"CAfile", OPT_CAFILE, '<', "PEM-format file of CA's"},
+    {"", OPT_CIPHER, '-', "Any supported cipher"},
 # ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 # endif
-    {"", OPT_CIPHER, '-', "Any supported cipher"},
     {NULL}
 };
 

diff --git a/apps/req.c b/apps/req.c
index 3bae59ec8b857fedc76f928d03cc27399b1a0e77..00d7c4a13508748af66ba6a75a258c5fdb0c9cba 100644 (file)
--- a/apps/req.c
+++ b/apps/req.c
@@ -176,11 +176,11 @@ OPTIONS req_options[] = {
      "Cert extension section (override value in config file)"},
     {"reqexts", OPT_REQEXTS, 's',
      "Request extension section (override value in config file)"},
+    {"", OPT_MD, '-', "Any supported digest"},
 #ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
     {"keygen_engine", OPT_KEYGEN_ENGINE, 's'},
 #endif
-    {"", OPT_MD, '-', "Any supported digest"},
     {NULL}
 };
 

diff --git a/apps/rsa.c b/apps/rsa.c
index 87cb70254e8047e7695615f8d30909ac771172a0..51581aed280ae1e284d9e218848a2a2d579847b2 100644 (file)
--- a/apps/rsa.c
+++ b/apps/rsa.c
@@ -138,14 +138,16 @@ OPTIONS rsa_options[] = {
     {"passin", OPT_PASSIN, 's', "Input file pass phrase source"},
     {"RSAPublicKey_in", OPT_RSAPUBKEY_IN, '-', "Input is an RSAPublicKey"},
     {"RSAPublicKey_out", OPT_RSAPUBKEY_OUT, '-', "Output is an RSAPublicKey"},
-    {"pvk-strong", OPT_PVK_STRONG, '-'},
-    {"pvk-weak", OPT_PVK_WEAK, '-'},
-    {"pvk-none", OPT_PVK_NONE, '-'},
     {"noout", OPT_NOOUT, '-', "Don't print key out"},
     {"text", OPT_TEXT, '-', "Print the key in text"},
     {"modulus", OPT_MODULUS, '-', "Print the RSA key modulus"},
     {"check", OPT_CHECK, '-', "Verify key consistency"},
     {"", OPT_CIPHER, '-', "Any supported cipher"},
+# ifdef OPENSSL_NO_RC4
+    {"pvk-strong", OPT_PVK_STRONG, '-'},
+    {"pvk-weak", OPT_PVK_WEAK, '-'},
+    {"pvk-none", OPT_PVK_NONE, '-'},
+# endif
 # ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 # endif
@@ -170,11 +172,6 @@ int rsa_main(int argc, char **argv)
         switch (o) {
         case OPT_EOF:
         case OPT_ERR:
-#ifdef OPENSSL_NO_RC4
-        case OPT_PVK_STRONG:
-        case OPT_PVK_WEAK:
-        case OPT_PVK_NONE:
-#endif
  opthelp:
             BIO_printf(bio_err, "%s: Use -help for summary.\n", prog);
             goto end;
@@ -227,6 +224,11 @@ int rsa_main(int argc, char **argv)
         case OPT_PVK_NONE:
             pvk_encr = 0;
             break;
+#else
+        case OPT_PVK_STRONG:
+        case OPT_PVK_WEAK:
+        case OPT_PVK_NONE:
+            break;
 #endif
         case OPT_NOOUT:
             noout = 1;

diff --git a/apps/s_client.c b/apps/s_client.c
index 009e5fe8956b86b079874fc8bbcbd482d9a93a36..22aa27080d0fc1801383ecd25fbbccd5b7f0504d 100644 (file)
--- a/apps/s_client.c
+++ b/apps/s_client.c
@@ -509,17 +509,9 @@ OPTIONS s_client_options[] = {
     {"quiet", OPT_QUIET, '-', "No s_client output"},
     {"ign_eof", OPT_IGN_EOF, '-', "Ignore input eof (default when -quiet)"},
     {"no_ign_eof", OPT_NO_IGN_EOF, '-', "Don't ignore input eof"},
-#ifndef OPENSSL_NO_SSL3
-    {"ssl3", OPT_SSL3, '-', "Just use SSLv3"},
-#endif
     {"tls1_2", OPT_TLS1_2, '-', "Just use TLSv1.2"},
     {"tls1_1", OPT_TLS1_1, '-', "Just use TLSv1.1"},
     {"tls1", OPT_TLS1, '-', "Just use TLSv1"},
-    {"dtls", OPT_DTLS, '-'},
-    {"dtls1", OPT_DTLS1, '-', "Just use DTLSv1"},
-    {"dtls1_2", OPT_DTLS1_2, '-'},
-    {"timeout", OPT_TIMEOUT, '-'},
-    {"mtu", OPT_MTU, 'p', "Set the link layer MTU"},
     {"starttls", OPT_STARTTLS, 's',
      "Use the STARTTLS command before starting TLS"},
     {"xmpphost", OPT_XMPPHOST, 's', "Host to use with \"-starttls xmpp\""},
@@ -534,6 +526,48 @@ OPTIONS s_client_options[] = {
     {"keymatexportlen", OPT_KEYMATEXPORTLEN, 'p',
      "Export len bytes of keying material (default 20)"},
     {"fallback_scsv", OPT_FALLBACKSCSV, '-', "Send the fallback SCSV"},
+    {"name", OPT_SMTPHOST, 's', "Hostname to use for \"-starttls smtp\""},
+    {"CRL", OPT_CRL, '<'},
+    {"crl_download", OPT_CRL_DOWNLOAD, '-'},
+    {"CRLform", OPT_CRLFORM, 'F'},
+    {"verify_return_error", OPT_VERIFY_RET_ERROR, '-'},
+    {"verify_quiet", OPT_VERIFY_QUIET, '-'},
+    {"brief", OPT_BRIEF, '-'},
+    {"prexit", OPT_PREXIT, '-'},
+    {"security_debug", OPT_SECURITY_DEBUG, '-'},
+    {"security_debug_verbose", OPT_SECURITY_DEBUG_VERBOSE, '-'},
+    {"cert_chain", OPT_CERT_CHAIN, '<'},
+    {"chainCApath", OPT_CHAINCAPATH, '/'},
+    {"verifyCApath", OPT_VERIFYCAPATH, '/'},
+    {"build_chain", OPT_BUILD_CHAIN, '-'},
+    {"chainCAfile", OPT_CHAINCAFILE, '<'},
+    {"verifyCAfile", OPT_VERIFYCAFILE, '<'},
+    {"nocommands", OPT_NOCMDS, '-', "Do not use interactive command letters"},
+    {"servername", OPT_SERVERNAME, 's',
+     "Set TLS extension servername in ClientHello"},
+    {"tlsextdebug", OPT_TLSEXTDEBUG, '-',
+     "Hex dump of all TLS extensions received"},
+    {"status", OPT_STATUS, '-', "Request certificate status from server"},
+    {"serverinfo", OPT_SERVERINFO, 's',
+     "types  Send empty ClientHello extensions (comma-separated numbers)"},
+    {"alpn", OPT_ALPN, 's',
+     "Enable ALPN extension, considering named protocols supported (comma-separated list)"},
+    OPT_S_OPTIONS,
+    OPT_V_OPTIONS,
+    OPT_X_OPTIONS,
+#ifndef OPENSSL_NO_SSL3
+    {"ssl3", OPT_SSL3, '-', "Just use SSLv3"},
+#endif
+#ifndef OPENSSL_NO_DTLS1
+    {"dtls", OPT_DTLS, '-'},
+    {"dtls1", OPT_DTLS1, '-', "Just use DTLSv1"},
+    {"dtls1_2", OPT_DTLS1_2, '-'},
+    {"timeout", OPT_TIMEOUT, '-'},
+    {"mtu", OPT_MTU, 'p', "Set the link layer MTU"},
+#endif
+#ifndef OPENSSL_NO_SSL_TRACE
+    {"trace", OPT_TRACE, '-'},
+#endif
 #ifdef WATT32
     {"wdebug", OPT_WDEBUG, '-', "WATT-32 tcp debugging"},
 #endif
@@ -556,44 +590,14 @@ OPTIONS s_client_options[] = {
      "Tolerate other than the known g N values."},
     {"srp_strength", OPT_SRP_STRENGTH, 'p', "Minimal mength in bits for N"},
 #endif
-    {"name", OPT_SMTPHOST, 's', "Hostname to use for \"-starttls smtp\""},
-    {"servername", OPT_SERVERNAME, 's',
-     "Set TLS extension servername in ClientHello"},
-    {"tlsextdebug", OPT_TLSEXTDEBUG, '-',
-     "Hex dump of all TLS extensions received"},
-    {"status", OPT_STATUS, '-', "Request certificate status from server"},
-    {"serverinfo", OPT_SERVERINFO, 's',
-     "types  Send empty ClientHello extensions (comma-separated numbers)"},
-    {"alpn", OPT_ALPN, 's',
-     "Enable ALPN extension, considering named protocols supported (comma-separated list)"},
 #ifndef OPENSSL_NO_NEXTPROTONEG
     {"nextprotoneg", OPT_NEXTPROTONEG, 's',
      "Enable NPN extension, considering named protocols supported (comma-separated list)"},
 #endif
-    {"CRL", OPT_CRL, '<'},
-    {"crl_download", OPT_CRL_DOWNLOAD, '-'},
-    {"CRLform", OPT_CRLFORM, 'F'},
-    {"verify_return_error", OPT_VERIFY_RET_ERROR, '-'},
-    {"verify_quiet", OPT_VERIFY_QUIET, '-'},
-    {"brief", OPT_BRIEF, '-'},
-    {"prexit", OPT_PREXIT, '-'},
-    {"trace", OPT_TRACE, '-'},
-    {"security_debug", OPT_SECURITY_DEBUG, '-'},
-    {"security_debug_verbose", OPT_SECURITY_DEBUG_VERBOSE, '-'},
-    {"cert_chain", OPT_CERT_CHAIN, '<'},
-    {"chainCApath", OPT_CHAINCAPATH, '/'},
-    {"verifyCApath", OPT_VERIFYCAPATH, '/'},
-    {"build_chain", OPT_BUILD_CHAIN, '-'},
-    {"chainCAfile", OPT_CHAINCAFILE, '<'},
-    {"verifyCAfile", OPT_VERIFYCAFILE, '<'},
-    {"nocommands", OPT_NOCMDS, '-', "Do not use interactive command letters"},
 #ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
     {"ssl_client_engine", OPT_SSL_CLIENT_ENGINE, 's'},
 #endif
-    OPT_S_OPTIONS,
-    OPT_V_OPTIONS,
-    OPT_X_OPTIONS,
     {NULL}
 };
 
@@ -706,29 +710,6 @@ int s_client_main(int argc, char **argv)
     prog = opt_init(argc, argv, s_client_options);
     while ((o = opt_next()) != OPT_EOF) {
         switch (o) {
-#ifndef WATT32
-        case OPT_WDEBUG:
-#endif
-#ifdef OPENSSL_NO_JPAKE
-        case OPT_JPAKE:
-#endif
-#ifdef OPENSSL_NO_SSL_TRACE
-        case OPT_TRACE:
-#endif
-#ifdef OPENSSL_NO_PSK
-        case OPT_PSK_IDENTITY:
-        case OPT_PSK:
-#endif
-#ifdef OPENSSL_NO_SSL3
-        case OPT_SSL3:
-#endif
-#ifdef OPENSSL_NO_DTLS1
-        case OPT_DTLS:
-        case OPT_DTLS1:
-        case OPT_DTLS1_2:
-        case OPT_TIMEOUT:
-        case OPT_MTU:
-#endif
         case OPT_EOF:
         case OPT_ERR:
  opthelp:
@@ -866,22 +847,22 @@ int s_client_main(int argc, char **argv)
         case OPT_STATUS:
             c_status_req = 1;
             break;
-#ifdef WATT32
         case OPT_WDEBUG:
+#ifdef WATT32
             dbug_init();
-            break;
 #endif
+            break;
         case OPT_MSG:
             c_msg = 1;
             break;
         case OPT_MSGFILE:
             bio_c_msg = BIO_new_file(opt_arg(), "w");
             break;
-#ifndef OPENSSL_NO_SSL_TRACE
         case OPT_TRACE:
+#ifndef OPENSSL_NO_SSL_TRACE
             c_msg = 2;
-            break;
 #endif
+            break;
         case OPT_SECURITY_DEBUG:
             sdebug = 1;
             break;
@@ -908,6 +889,9 @@ int s_client_main(int argc, char **argv)
                 BIO_printf(bio_err, "Not a hex number '%s'\n", psk_key);
                 goto end;
             }
+#else
+        case OPT_PSK_IDENTITY:
+        case OPT_PSK:
             break;
 #endif
 #ifndef OPENSSL_NO_SRP
@@ -941,11 +925,11 @@ int s_client_main(int argc, char **argv)
         case OPT_SRP_MOREGROUPS:
             break;
 #endif
-#ifndef OPENSSL_NO_SSL3
         case OPT_SSL3:
+#ifndef OPENSSL_NO_SSL3
             meth = SSLv3_client_method();
-            break;
 #endif
+            break;
         case OPT_TLS1_2:
             meth = TLSv1_2_client_method();
             break;
@@ -974,6 +958,13 @@ int s_client_main(int argc, char **argv)
         case OPT_MTU:
             socket_mtu = atol(opt_arg());
             break;
+#else
+        case OPT_DTLS:
+        case OPT_DTLS1:
+        case OPT_DTLS1_2:
+        case OPT_TIMEOUT:
+        case OPT_MTU:
+            break;
 #endif
         case OPT_FALLBACKSCSV:
             fallback_scsv = 1;
@@ -1038,13 +1029,12 @@ int s_client_main(int argc, char **argv)
                 goto end;
         case OPT_SERVERNAME:
             servername = opt_arg();
-            /* meth=TLSv1_client_method(); */
             break;
-#ifndef OPENSSL_NO_JPAKE
         case OPT_JPAKE:
+#ifndef OPENSSL_NO_JPAKE
             jpake_secret = opt_arg();
-            break;
 #endif
+            break;
         case OPT_USE_SRTP:
             srtp_profiles = opt_arg();
             break;

diff --git a/apps/s_server.c b/apps/s_server.c
index 189019d1b2e20b4e930e62a45f3276503c29a1e6..6bd0257a7a7142fa690ec6b968fe540abf694882 100644 (file)
--- a/apps/s_server.c
+++ b/apps/s_server.c
@@ -806,9 +806,7 @@ typedef enum OPTION_choice {
     OPT_BRIEF, OPT_NO_TMP_RSA, OPT_NO_DHE, OPT_NO_ECDHE,
     OPT_NO_RESUME_EPHEMERAL, OPT_PSK_HINT, OPT_PSK, OPT_SRPVFILE,
     OPT_SRPUSERSEED, OPT_REV, OPT_WWW, OPT_UPPER_WWW, OPT_HTTP,
-#ifndef OPENSSL_NO_SSL3
     OPT_SSL3,
-#endif
     OPT_TLS1_2, OPT_TLS1_1, OPT_TLS1, OPT_DTLS, OPT_DTLS1,
     OPT_DTLS1_2, OPT_TIMEOUT, OPT_MTU, OPT_CHAIN,
     OPT_ID_PREFIX, OPT_RAND, OPT_SERVERNAME, OPT_SERVERNAME_FATAL,
@@ -821,7 +819,6 @@ typedef enum OPTION_choice {
 
 OPTIONS s_server_options[] = {
     {"help", OPT_HELP, '-', "Display this summary"},
-
     {"port", OPT_PORT, 'p'},
     {"accept", OPT_PORT, 'p',
      "TCP/IP port to accept on (default is " PORT_STR ")"},
@@ -851,9 +848,6 @@ OPTIONS s_server_options[] = {
     {"dkeyform", OPT_DKEYFORM, 'F',
      "Second key format (PEM, DER or ENGINE) PEM default"},
     {"dpass", OPT_DPASS, 's', "Second private key file pass phrase source"},
-#ifdef FIONBIO
-    {"nbio", OPT_NBIO, '-', "Use non-blocking IO"},
-#endif
     {"nbio_test", OPT_NBIO_TEST, '-', "Test with the non-blocking test bio"},
     {"crlf", OPT_CRLF, '-', "Convert LF from terminal into CRLF"},
     {"debug", OPT_DEBUG, '-', "Print more output"},
@@ -865,47 +859,13 @@ OPTIONS s_server_options[] = {
     {"nocert", OPT_NOCERT, '-', "Don't use any certificates (Anon-DH)"},
     {"quiet", OPT_QUIET, '-', "No server output"},
     {"no_tmp_rsa", OPT_NO_TMP_RSA, '-', "Do not generate a tmp RSA key"},
-#ifndef OPENSSL_NO_PSK
-    {"psk_hint", OPT_PSK_HINT, 's', "PSK identity hint to use"},
-    {"psk", OPT_PSK, 's', "PSK in hex (without 0x)"},
-# ifndef OPENSSL_NO_JPAKE
-    {"jpake", OPT_JPAKE, 's', "JPAKE secret to use"},
-# endif
-#endif
-#ifndef OPENSSL_NO_SRP
-    {"srpvfile", OPT_SRPVFILE, '<', "The verifier file for SRP"},
-    {"srpuserseed", OPT_SRPUSERSEED, 's',
-     "A seed string for a default user salt"},
-#endif
-#ifndef OPENSSL_NO_SSL3
-    {"ssl3", OPT_SSL3, '-', "Just talk SSLv3"},
-#endif
     {"tls1_2", OPT_TLS1_2, '-', "just talk TLSv1.2"},
     {"tls1_1", OPT_TLS1_1, '-', "Just talk TLSv1.1"},
     {"tls1", OPT_TLS1, '-', "Just talk TLSv1"},
-#ifndef OPENSSL_NO_DTLS1
-    {"dtls", OPT_DTLS, '-'},
-    {"dtls1", OPT_DTLS1, '-', "Just talk DTLSv1"},
-    {"dtls1_2", OPT_DTLS1_2, '-', "Just talk DTLSv1.2"},
-    {"timeout", OPT_TIMEOUT, '-', "Enable timeouts"},
-    {"mtu", OPT_MTU, 'p', "Set link layer MTU"},
-    {"chain", OPT_CHAIN, '-', "Read a certificate chain"},
-#endif
-#ifndef OPENSSL_NO_DH
-    {"no_dhe", OPT_NO_DHE, '-', "Disable ephemeral DH"},
-#endif
-#ifndef OPENSSL_NO_EC
-    {"no_ecdhe", OPT_NO_ECDHE, '-', "Disable ephemeral ECDH"},
-#endif
     {"no_resume_ephemeral", OPT_NO_RESUME_EPHEMERAL, '-',
      "Disable caching and tickets if ephemeral (EC)DH is used"},
     {"www", OPT_WWW, '-', "Respond to a 'GET /' with a status page"},
     {"WWW", OPT_UPPER_WWW, '-', "Respond to a 'GET with the file ./path"},
-    {"HTTP", OPT_HTTP, '-', "Like -WWW but ./path incluedes HTTP headers"},
-    {"id_prefix", OPT_ID_PREFIX, 's',
-     "Generate SSL/TLS session IDs prefixed by arg"},
-    {"rand", OPT_RAND, 's',
-     "Load the file(s) into the random number generator"},
     {"servername", OPT_SERVERNAME, 's',
      "Servername for HostName TLS extension"},
     {"servername_fatal", OPT_SERVERNAME_FATAL, '-',
@@ -916,14 +876,11 @@ OPTIONS s_server_options[] = {
      "-Private Key file to use for servername if not in -cert2"},
     {"tlsextdebug", OPT_TLSEXTDEBUG, '-',
      "Hex dump of all TLS extensions received"},
-#ifndef OPENSSL_NO_NEXTPROTONEG
-    {"nextprotoneg", OPT_NEXTPROTONEG, 's',
-     "Set the advertised protocols for the NPN extension (comma-separated list)"},
-#endif
-    {"use_srtp", OPT_SRTP_PROFILES, '<',
-     "Offer SRTP key management with a colon-separated profile list"},
-    {"alpn", OPT_ALPN, 's',
-     "Set the advertised protocols for the ALPN extension (comma-separated list)"},
+    {"HTTP", OPT_HTTP, '-', "Like -WWW but ./path incluedes HTTP headers"},
+    {"id_prefix", OPT_ID_PREFIX, 's',
+     "Generate SSL/TLS session IDs prefixed by arg"},
+    {"rand", OPT_RAND, 's',
+     "Load the file(s) into the random number generator"},
     {"keymatexport", OPT_KEYMATEXPORT, 's',
      "Export keying material using label"},
     {"keymatexportlen", OPT_KEYMATEXPORTLEN, 'p',
@@ -953,12 +910,54 @@ OPTIONS s_server_options[] = {
     {"security_debug_verbose", OPT_SECURITY_DEBUG_VERBOSE, '-'},
     {"brief", OPT_BRIEF, '-'},
     {"rev", OPT_REV, '-'},
-#ifndef OPENSSL_NO_ENGINE
-    {"engine", OPT_ENGINE, 's'},
-#endif
     OPT_S_OPTIONS,
     OPT_V_OPTIONS,
     OPT_X_OPTIONS,
+#ifdef FIONBIO
+    {"nbio", OPT_NBIO, '-', "Use non-blocking IO"},
+#endif
+#ifndef OPENSSL_NO_PSK
+    {"psk_hint", OPT_PSK_HINT, 's', "PSK identity hint to use"},
+    {"psk", OPT_PSK, 's', "PSK in hex (without 0x)"},
+# ifndef OPENSSL_NO_JPAKE
+    {"jpake", OPT_JPAKE, 's', "JPAKE secret to use"},
+# endif
+#endif
+#ifndef OPENSSL_NO_SRP
+    {"srpvfile", OPT_SRPVFILE, '<', "The verifier file for SRP"},
+    {"srpuserseed", OPT_SRPUSERSEED, 's',
+     "A seed string for a default user salt"},
+#endif
+#ifndef OPENSSL_NO_SSL3
+    {"ssl3", OPT_SSL3, '-', "Just talk SSLv3"},
+#endif
+#ifndef OPENSSL_NO_DTLS1
+    {"dtls", OPT_DTLS, '-'},
+    {"dtls1", OPT_DTLS1, '-', "Just talk DTLSv1"},
+    {"dtls1_2", OPT_DTLS1_2, '-', "Just talk DTLSv1.2"},
+    {"timeout", OPT_TIMEOUT, '-', "Enable timeouts"},
+    {"mtu", OPT_MTU, 'p', "Set link layer MTU"},
+    {"chain", OPT_CHAIN, '-', "Read a certificate chain"},
+#endif
+#ifndef OPENSSL_NO_DH
+    {"no_dhe", OPT_NO_DHE, '-', "Disable ephemeral DH"},
+#endif
+#ifndef OPENSSL_NO_EC
+    {"no_ecdhe", OPT_NO_ECDHE, '-', "Disable ephemeral ECDH"},
+#endif
+#ifndef OPENSSL_NO_NEXTPROTONEG
+    {"nextprotoneg", OPT_NEXTPROTONEG, 's',
+     "Set the advertised protocols for the NPN extension (comma-separated list)"},
+#endif
+#ifndef OPENSSL_NO_SRTP
+    {"use_srtp", OPT_SRTP_PROFILES, '<',
+     "Offer SRTP key management with a colon-separated profile list"},
+    {"alpn", OPT_ALPN, 's',
+     "Set the advertised protocols for the ALPN extension (comma-separated list)"},
+#endif
+#ifndef OPENSSL_NO_ENGINE
+    {"engine", OPT_ENGINE, 's'},
+#endif
     {NULL}
 };
 
@@ -1246,13 +1245,11 @@ int s_server_main(int argc, char *argv[])
         case OPT_MSGFILE:
             bio_s_msg = BIO_new_file(opt_arg(), "w");
             break;
-#ifndef OPENSSL_NO_SSL_TRACE
         case OPT_TRACE:
+#ifndef OPENSSL_NO_SSL_TRACE
             s_msg = 2;
-            break;
 #else
-        case OPT_TRACE:
-            goto opthelp;
+            break;
 #endif
         case OPT_SECURITY_DEBUG:
             sdebug = 1;
@@ -1296,6 +1293,10 @@ int s_server_main(int argc, char *argv[])
                 goto end;
             }
             break;
+#else
+        case OPT_PSK_HINT:
+        case OPT_PSK:
+            break;
 #endif
 #ifndef OPENSSL_NO_SRP
         case OPT_SRPVFILE:
@@ -1323,11 +1324,11 @@ int s_server_main(int argc, char *argv[])
         case OPT_HTTP:
             www = 3;
             break;
-#ifndef OPENSSL_NO_SSL3
         case OPT_SSL3:
+#ifndef OPENSSL_NO_SSL3
             meth = SSLv3_server_method();
-            break;
 #endif
+            break;
         case OPT_TLS1_2:
             meth = TLSv1_2_server_method();
             break;
@@ -1359,6 +1360,14 @@ int s_server_main(int argc, char *argv[])
         case OPT_CHAIN:
             cert_chain = 1;
             break;
+#else
+        case OPT_DTLS:
+        case OPT_DTLS1:
+        case OPT_DTLS1_2:
+        case OPT_TIMEOUT:
+        case OPT_MTU:
+        case OPT_CHAIN:
+            break;
 #endif
         case OPT_ID_PREFIX:
             session_id_prefix = opt_arg();
@@ -1381,11 +1390,11 @@ int s_server_main(int argc, char *argv[])
         case OPT_KEY2:
             s_key_file2 = opt_arg();
             break;
-#ifndef OPENSSL_NO_NEXTPROTONEG
         case OPT_NEXTPROTONEG:
+# ifndef OPENSSL_NO_NEXTPROTONEG
             next_proto_neg_in = opt_arg();
-            break;
 #endif
+            break;
         case OPT_ALPN:
             alpn_in = opt_arg();
             break;

diff --git a/apps/s_time.c b/apps/s_time.c
index 74decd23bcbdc64f1c96d7924f99c8c400fbe318..4f56174d6561cdece4262776fbc91dd19b7c447e 100644 (file)
--- a/apps/s_time.c
+++ b/apps/s_time.c
@@ -114,9 +114,7 @@ typedef enum OPTION_choice {
     OPT_ERR = -1, OPT_EOF = 0, OPT_HELP,
     OPT_CONNECT, OPT_CIPHER, OPT_CERT, OPT_KEY, OPT_CAPATH,
     OPT_CAFILE, OPT_NEW, OPT_REUSE, OPT_BUGS, OPT_VERIFY, OPT_TIME,
-#ifndef OPENSSL_NO_SSL3
     OPT_SSL3,
-#endif
     OPT_WWW
 } OPTION_CHOICE;
 
@@ -227,11 +225,11 @@ int s_time_main(int argc, char **argv)
                 goto end;
             }
             break;
-#ifndef OPENSSL_NO_SSL3
         case OPT_SSL3:
+#ifndef OPENSSL_NO_SSL3
             meth = SSLv3_client_method();
-            break;
 #endif
+            break;
         }
     }
     argc = opt_num_rest();

diff --git a/apps/speed.c b/apps/speed.c
index b93237e5912cd840f726b13a8970a44f7fea64c0..45a060fd140281b0d4f8f07a5b5f91e149a9ebbe 100644 (file)
--- a/apps/speed.c
+++ b/apps/speed.c
@@ -358,19 +358,19 @@ OPTIONS speed_options[] = {
     {OPT_HELP_STR, 1, '-', "Usage: %s [options] ciphers...\n"},
     {OPT_HELP_STR, 1, '-', "Valid options are:\n"},
     {"help", OPT_HELP, '-', "Display this summary"},
+    {"evp", OPT_EVP, 's', "Use specified EVP cipher"},
+    {"decrypt", OPT_DECRYPT, '-',
+     "Time decryption instead of encryption (only EVP)"},
+    {"mr", OPT_MR, '-', "Produce machine readable output"},
+    {"mb", OPT_MB, '-'},
+    {"misalign", OPT_MISALIGN, 'n', "Amount to mis-align buffers"},
 #if defined(TIMES) || defined(USE_TOD)
     {"elapsed", OPT_ELAPSED, '-',
      "Measure time in real time instead of CPU user time"},
 #endif
-    {"evp", OPT_EVP, 's', "Use specified EVP cipher"},
-    {"decrypt", OPT_DECRYPT, '-',
-     "Time decryption instead of encryption (only EVP)"},
 #ifndef NO_FORK
     {"multi", OPT_MULTI, 'p', "Run benchmarks in parallel"},
 #endif
-    {"mr", OPT_MR, '-', "Produce machine readable output"},
-    {"mb", OPT_MB, '-'},
-    {"misalign", OPT_MISALIGN, 'n', "Amount to mis-align buffers"},
 #ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 #endif
@@ -829,11 +829,11 @@ int speed_main(int argc, char **argv)
         case OPT_ENGINE:
             (void)setup_engine(opt_arg(), 0);
             break;
-#ifndef NO_FORK
         case OPT_MULTI:
+#ifndef NO_FORK
             multi = atoi(opt_arg());
-            break;
 #endif
+            break;
         case OPT_MISALIGN:
             if (!opt_int(opt_arg(), &misalign))
                 goto end;

diff --git a/apps/ts.c b/apps/ts.c
index dfbf7eaeb3f2d03a267ac481af9f840e105432c4..feec34ba4f2876f21660ed66a61a6682231bbb69 100644 (file)
--- a/apps/ts.c
+++ b/apps/ts.c
@@ -151,10 +151,10 @@ OPTIONS ts_options[] = {
     {"CApath", OPT_CAPATH, '/', "Path to trusted CA files"},
     {"CAfile", OPT_CAFILE, '<', "File with trusted CA certs"},
     {"untrusted", OPT_UNTRUSTED, '<', "File with untrusted certs"},
+    {"", OPT_MD, '-', "Any supported digest"},
 #ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 #endif
-    {"", OPT_MD, '-', "Any supported digest"},
     {NULL}
 };
 

diff --git a/apps/verify.c b/apps/verify.c
index 02351945679621d49fc75cba66afeba828de1961..227b85b38481d169158a70ef3cefdfb79a11aaa7 100644 (file)
--- a/apps/verify.c
+++ b/apps/verify.c
@@ -91,10 +91,10 @@ OPTIONS verify_options[] = {
     {"CRLfile", OPT_CRLFILE, '<'},
     {"crl_download", OPT_CRL_DOWNLOAD, '-'},
     {"show_chain", OPT_SHOW_CHAIN, '-'},
+    OPT_V_OPTIONS,
 #ifndef OPENSSL_NO_ENGINE
     {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 #endif
-    OPT_V_OPTIONS,
     {NULL}
 };
 

diff --git a/apps/x509.c b/apps/x509.c
index 77a2a6b437101941405e4d96a82b7de8cfec07c3..0345cf09c7671d3b2eaf36d17db2ade2a4a85002 100644 (file)
--- a/apps/x509.c
+++ b/apps/x509.c
@@ -107,13 +107,9 @@ typedef enum OPTION_choice {
     OPT_PURPOSE, OPT_STARTDATE, OPT_ENDDATE, OPT_CHECKEND, OPT_CHECKHOST,
     OPT_CHECKEMAIL, OPT_CHECKIP, OPT_NOOUT, OPT_TRUSTOUT, OPT_CLRTRUST,
     OPT_CLRREJECT, OPT_ALIAS, OPT_CACREATESERIAL, OPT_CLREXT, OPT_OCSPID,
-#ifndef OPENSSL_NO_MD5
     OPT_SUBJECT_HASH_OLD,
     OPT_ISSUER_HASH_OLD,
-#endif
-#ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
     OPT_FORCE_VERSION,
-#endif
     OPT_BADSIG, OPT_MD, OPT_ENGINE, OPT_NOCERT
 } OPTION_CHOICE;
 
@@ -130,12 +126,6 @@ OPTIONS x509_options[] = {
     {"serial", OPT_SERIAL, '-', "Print serial number value"},
     {"subject_hash", OPT_HASH, '-', "Print subject hash value"},
     {"issuer_hash", OPT_ISSUER_HASH, '-', "Print issuer hash value"},
-#ifndef OPENSSL_NO_MD5
-    {"subject_hash_old", OPT_SUBJECT_HASH_OLD, '-',
-     "Print old-style (MD5) issuer hash value"},
-    {"issuer_hash_old", OPT_ISSUER_HASH_OLD, '-',
-     "Print old-style (MD5) subject hash value"},
-#endif
     {"hash", OPT_HASH, '-', "Synonym for -subject_hash"},
     {"subject", OPT_SUBJECT, '-', "Print subject DN"},
     {"issuer", OPT_ISSUER, '-', "Print issuer DN"},
@@ -194,11 +184,17 @@ OPTIONS x509_options[] = {
     {"clrreject", OPT_CLRREJECT, '-'},
     {"badsig", OPT_BADSIG, '-'},
     {"", OPT_MD, '-', "Any supported digest"},
-#ifndef OPENSSL_NO_ENGINE
-    {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
+#ifndef OPENSSL_NO_MD5
+    {"subject_hash_old", OPT_SUBJECT_HASH_OLD, '-',
+     "Print old-style (MD5) issuer hash value"},
+    {"issuer_hash_old", OPT_ISSUER_HASH_OLD, '-',
+     "Print old-style (MD5) subject hash value"},
 #endif
 #ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
     {"force_version", OPT_FORCE_VERSION, 'p'},
+#endif
+#ifndef OPENSSL_NO_ENGINE
+    {"engine", OPT_ENGINE, 's', "Use engine, possibly a hardware device"},
 #endif
     {NULL}
 };
@@ -291,11 +287,11 @@ int x509_main(int argc, char **argv)
             if (!sigopts || !sk_OPENSSL_STRING_push(sigopts, opt_arg()))
                 goto opthelp;
             break;
-#ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
         case OPT_FORCE_VERSION:
+#ifdef OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL
             force_version = atoi(opt_arg()) - 1;
-            break;
 #endif
+            break;
         case OPT_DAYS:
             days = atoi(opt_arg());
             break;
@@ -459,6 +455,10 @@ int x509_main(int argc, char **argv)
         case OPT_ISSUER_HASH_OLD:
             issuer_hash_old = ++num;
             break;
+#else
+        case OPT_SUBJECT_HASH_OLD:
+        case OPT_ISSUER_HASH_OLD:
+            break;
 #endif
         case OPT_DATES:
             startdate = ++num;