test

diff --git a/Doc/library/time.rst b/Doc/library/time.rst
index 6bfd521176882c175923d1bcb1cabc3ed52ee3b8..f5e08c5c95c228c32421b9872ccf567c6b08dee1 100644 (file)
--- a/Doc/library/time.rst
+++ b/Doc/library/time.rst
@@ -350,6 +350,10 @@ The module defines the following functions and data items:
    requested by an arbitrary amount because of the scheduling of other activity
    in the system.
 
+   .. versionchanged:: 3.5
+      The function now sleeps at least *secs* even if the sleep is interrupted
+      by a signal (see :pep:`475` for the rationale).
+
 
 .. function:: strftime(format[, t])
 

diff --git a/Lib/test/eintrdata/eintr_tester.py b/Lib/test/eintrdata/eintr_tester.py
index 40dca847d00f7c35e42df6d5b351d42f151d9933..85475769053f7b577c0fab3195cbe006450d7c22 100644 (file)
--- a/Lib/test/eintrdata/eintr_tester.py
+++ b/Lib/test/eintrdata/eintr_tester.py
@@ -252,8 +252,23 @@ class SocketEINTRTest(EINTRBaseTest):
                         lambda path: os.close(os.open(path, os.O_WRONLY)))
 
 
+@unittest.skipUnless(hasattr(signal, "setitimer"), "requires setitimer()")
+class TimeEINTRTest(EINTRBaseTest):
+    """ EINTR tests for the time module. """
+
+    def test_sleep(self):
+        t0 = time.monotonic()
+        time.sleep(2)
+        signal.alarm(0)
+        dt = time.monotonic() - t0
+        self.assertGreaterEqual(dt, 1.9)
+
+
 def test_main():
-    support.run_unittest(OSEINTRTest, SocketEINTRTest)
+    support.run_unittest(
+        OSEINTRTest,
+        SocketEINTRTest,
+        TimeEINTRTest)
 
 
 if __name__ == "__main__":

diff --git a/Lib/test/test_signal.py b/Lib/test/test_signal.py
index 774fc809a1520b018b696c780de29865957d9354..6ecff9e2137c3872bf2b327a800ea1c7efd4354d 100644 (file)
--- a/Lib/test/test_signal.py
+++ b/Lib/test/test_signal.py
@@ -419,17 +419,20 @@ class WakeupSignalTests(unittest.TestCase):
             TIMEOUT_HALF = 5
 
             signal.alarm(1)
-            before_time = time.time()
+
             # We attempt to get a signal during the sleep,
             # before select is called
-            time.sleep(TIMEOUT_FULL)
-            mid_time = time.time()
-            dt = mid_time - before_time
-            if dt >= TIMEOUT_HALF:
-                raise Exception("%s >= %s" % (dt, TIMEOUT_HALF))
+            try:
+                select.select([], [], [], TIMEOUT_FULL)
+            except InterruptedError:
+                pass
+            else:
+                raise Exception("select() was not interrupted")
+
+            before_time = time.time()
             select.select([read], [], [], TIMEOUT_FULL)
             after_time = time.time()
-            dt = after_time - mid_time
+            dt = after_time - before_time
             if dt >= TIMEOUT_HALF:
                 raise Exception("%s >= %s" % (dt, TIMEOUT_HALF))
         """, signal.SIGALRM)

diff --git a/Modules/timemodule.c b/Modules/timemodule.c
index 7f5f3149afdb746aceb0d412c061a9f99ce3ec6c..0eb78e98792e483123b4b07b57de398cb7ebd70f 100644 (file)
--- a/Modules/timemodule.c
+++ b/Modules/timemodule.c
@@ -1386,74 +1386,94 @@ floattime(_Py_clock_info_t *info)
 static int
 floatsleep(double secs)
 {
-/* XXX Should test for MS_WINDOWS first! */
-#if defined(HAVE_SELECT) && !defined(__EMX__)
-    struct timeval t;
+    _PyTime_timeval deadline, monotonic;
+#ifndef MS_WINDOWS
+    struct timeval timeout;
     double frac;
-    int err;
-
-    frac = fmod(secs, 1.0);
-    secs = floor(secs);
-    t.tv_sec = (long)secs;
-    t.tv_usec = (long)(frac*1000000.0);
-    Py_BEGIN_ALLOW_THREADS
-    err = select(0, (fd_set *)0, (fd_set *)0, (fd_set *)0, &t);
-    Py_END_ALLOW_THREADS
-    if (err != 0) {
-#ifdef EINTR
-        if (errno == EINTR) {
-            if (PyErr_CheckSignals())
-                return -1;
-        }
-        else
-#endif
-        {
-            PyErr_SetFromErrno(PyExc_OSError);
+    int err = 0;
+
+    _PyTime_monotonic(&deadline);
+    _PyTime_ADD_SECONDS(deadline, secs);
+
+    while (1) {
+        frac = fmod(secs, 1.0);
+        secs = floor(secs);
+        timeout.tv_sec = (long)secs;
+        timeout.tv_usec = (long)(frac*1000000.0);
+
+        Py_BEGIN_ALLOW_THREADS
+        err = select(0, (fd_set *)0, (fd_set *)0, (fd_set *)0, &timeout);
+        Py_END_ALLOW_THREADS
+
+        if (!(err != 0 && errno == EINTR))
+            break;
+
+        /* select() was interrupted by a signal */
+        if (PyErr_CheckSignals())
             return -1;
+
+        _PyTime_monotonic(&monotonic);
+        secs = _PyTime_INTERVAL(monotonic, deadline);
+        if (secs <= 0.0) {
+            err = 0;
+            errno = 0;
+            break;
         }
     }
-#elif defined(__WATCOMC__) && !defined(__QNX__)
-    /* XXX Can't interrupt this sleep */
-    Py_BEGIN_ALLOW_THREADS
-    delay((int)(secs * 1000 + 0.5));  /* delay() uses milliseconds */
-    Py_END_ALLOW_THREADS
-#elif defined(MS_WINDOWS)
-    {
-        double millisecs = secs * 1000.0;
-        unsigned long ul_millis;
 
+    if (err != 0) {
+        PyErr_SetFromErrno(PyExc_OSError);
+        return -1;
+    }
+#else
+    double millisecs;
+    unsigned long ul_millis;
+    DWORD rc;
+    HANDLE hInterruptEvent;
+
+    _PyTime_monotonic(&deadline);
+    _PyTime_ADD_SECONDS(deadline, secs);
+
+    do {
+        millisecs = secs * 1000.0;
         if (millisecs > (double)ULONG_MAX) {
             PyErr_SetString(PyExc_OverflowError,
                             "sleep length is too large");
             return -1;
         }
-        Py_BEGIN_ALLOW_THREADS
+
         /* Allow sleep(0) to maintain win32 semantics, and as decreed
          * by Guido, only the main thread can be interrupted.
          */
         ul_millis = (unsigned long)millisecs;
-        if (ul_millis == 0 || !_PyOS_IsMainThread())
-            Sleep(ul_millis);
+        if (ul_millis == 0 || !_PyOS_IsMainThread()) {
+            Py_BEGIN_ALLOW_THREADS
+            Sleep(0);
+            Py_END_ALLOW_THREADS
+            break;
+        }
         else {
-            DWORD rc;
-            HANDLE hInterruptEvent = _PyOS_SigintEvent();
+            hInterruptEvent = _PyOS_SigintEvent();
             ResetEvent(hInterruptEvent);
+
+            Py_BEGIN_ALLOW_THREADS
             rc = WaitForSingleObjectEx(hInterruptEvent, ul_millis, FALSE);
-            if (rc == WAIT_OBJECT_0) {
-                Py_BLOCK_THREADS
-                errno = EINTR;
-                PyErr_SetFromErrno(PyExc_OSError);
+            Py_END_ALLOW_THREADS
+
+            if (rc != WAIT_OBJECT_0)
+                break;
+
+            /* WaitForSingleObjectEx() was interrupted by SIGINT */
+
+            if (PyErr_CheckSignals())
                 return -1;
-            }
+
+            _PyTime_monotonic(&monotonic);
+            secs = _PyTime_INTERVAL(monotonic, deadline);
+            if (secs <= 0.0)
+                break;
         }
-        Py_END_ALLOW_THREADS
-    }
-#else
-    /* XXX Can't interrupt this sleep */
-    Py_BEGIN_ALLOW_THREADS
-    sleep((int)secs);
-    Py_END_ALLOW_THREADS
+    } while (1);
 #endif
-
     return 0;
 }