-*change.txt* For Vim version 7.0aa. Last change: 2004 Dec 24
+*change.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
or copied with the yank "y" command, regardless of whether or not a specific
register was used (e.g. "xdd). This is like the unnamed register is pointing
to the last used register. An exception is the '_' register: "_dd does not
-store the deleted text in any register. Vim uses the contents of this
-register for any put command (p or P) which does not specify a register.
-Additionally you can access it with the name '"'. This means you have to type
-two double quotes. Writing to the "" register writes to register "0.
+store the deleted text in any register.
+Vim uses the contents of the unnamed register for any put command (p or P)
+which does not specify a register. Additionally you can access it with the
+name '"'. This means you have to type two double quotes. Writing to the ""
+register writes to register "0.
{Vi: register contents are lost when changing files, no '"'}
2. Numbered registers "0 to "9 *quote_number* *quote0* *quote1*
Numbered register 1 contains the text deleted by the most recent delete or
change command, unless the command specified another register or the text is
less than one line (the small delete register is used then). An exception is
-made for these commands: |%|, |(|, |)|, |`|, |/|, |?|, |n|, |N|, |{| and |}|.
-Register "1 is always used then (this is Vi compatible). The "- register is
-used as well if the delete is within a line.
+made for the delete operator with these movement commands: |%|, |(|, |)|, |`|,
+|/|, |?|, |n|, |N|, |{| and |}|. Register "1 is always used then (this is Vi
+compatible). The "- register is used as well if the delete is within a line.
With each successive deletion or change, Vim shifts the previous contents
of register 1 into register 2, 2 into 3, and so forth, losing the previous
contents of register 9.
-*editing.txt* For Vim version 7.0aa. Last change: 2004 Dec 16
+*editing.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
name. {not in Vi}
All file names are remembered in the buffer list. When you enter a file name,
-for editing (e.g., with ":e filename") or writing (e.g., with (:w file name"),
+for editing (e.g., with ":e filename") or writing (e.g., with ":w file name"),
the file name is added to the list. You can use the buffer list to remember
which files you edited and to quickly switch from one file to another (e.g.,
to copy text) with the |CTRL-^| command. First type the number of the file
:f[ile] Prints the current file name (as typed), the
cursor position (unless the 'ruler' option is set),
and the file status (readonly, modified, read errors,
- new file)). See the 'shortmess' option about how tho
+ new file). See the 'shortmess' option about how tho
make this message shorter. {Vi does not include
column number}
keep file names short. When reading or writing files the full name is still
used, the "~" is only used when displaying file names. When replacing the
file name would result in just "~", "~/" is used instead (to avoid confusion
-with 'backupext' set to "~").
+between options set to $HOME with 'backupext' set to "~").
When writing the buffer, the default is to use the current file name. Thus
when you give the "ZZ" or ":wq" command, the original file will be
*:vi* *:visual*
:vi[sual][!] [++opt] [+cmd] [file]
- When entered in Ex mode: Leave |Ex-mode|, go back to
+ When used in Ex mode: Leave |Ex-mode|, go back to
Normal mode. Otherwise same as |:edit|.
*:vie* *:view*
:vie[w] [++opt] [+cmd] file
- When entered in Ex mode: Leave Ex mode, go back to
+ When used in Ex mode: Leave |Ex mode|, go back to
Normal mode. Otherwise same as |:edit|, but set
'readonly' option for this buffer. {not in Vi}
in Vi}
:[count]wN[ext][!] [++opt] [+cmd] [file] *:wN* *:wNext*
-:[count]wp[revous][!] [++opt] [+cmd] [file] *:wp* *:wprevious*
+:[count]wp[revious][!] [++opt] [+cmd] [file] *:wp* *:wprevious*
Same as :wnext, but go to previous file instead of
next. {not in Vi}
'**' is more sophisticated:
- It ONLY matches directories.
- - It matches up to 30 directories deep, so you can use it to search an
+ - It matches up to 30 directories deep, so you can use it to search an
entire directory tree
- The maximum number of levels matched can be given by appending a number
to '**'.
-*fold.txt* For Vim version 7.0aa. Last change: 2004 Oct 15
+*fold.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
Create a fold for the lines in {range}. Works like "zf".
*zd* *E351*
-zd Delete one fold at the cursor. When the cursor is on folded
+zd Delete one fold at the cursor. When the cursor is on a folded
line, that fold is deleted. Nested folds are moved one level
up. In Visual mode all folds (partially) in the selected area
are deleted. Careful: This easily deletes more folds than you
'foldlevel' is a number option: The higher the more folded regions are open.
When 'foldlevel' is 0, all folds are closed.
-When 'foldlevel' is positive, some folds closed.
+When 'foldlevel' is positive, some folds are closed.
When 'foldlevel' is very high, all folds are open.
'foldlevel' is applied when it is changed. After that manually folds can be
opened and closed.
-*gui.txt* For Vim version 7.0aa. Last change: 2004 Jun 15
+*gui.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
:let bmenu_max_pathlen = 50
- If the "-U {gvimrc}" command-line option has been used when starting Vim,
the {gvimrc} file will be read for initializations. The following
- initializations are skipped.
+ initializations are skipped. When {gvimrc} is "NONE" no file will be read
+ for initializations.
- For Unix and MS-Windows, if the system gvimrc exists, it is sourced. The
name of this file is normally "$VIM/gvimrc". You can check this with
":version". Also see |$VIM|.
-*gui_x11.txt* For Vim version 7.0aa. Last change: 2004 Jul 02
+*gui_x11.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
==============================================================================
7. KDE version *gui-kde* *kde* *KDE* *KVim*
+NOTE: The KDE version is still under development. It is not recommended for
+daily work.
+
The KDE version of Vim works with KDE 2.x and KDE 3.x.
KVim (name code for gui-kde) does not use traditional X settings for its
configuration.
-*index.txt* For Vim version 7.0aa. Last change: 2004 Dec 24
+*index.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
------------------------------------------------------------------------------
|v_CTRL-\_CTRL-N| CTRL-\ CTRL-N stop Visual mode
|v_CTRL-\_CTRL-G| CTRL-\ CTRL-G go to mode specified with 'insertmode'
+|v_CTRL-C| CTRL-C stop Visual mode
|v_CTRL-G| CTRL-G toggle between Visual mode and Select mode
|v_<BS>| <BS> 2 Select mode: delete highlighted area
|v_CTRL-H| CTRL-H 2 same as <BS>
command
|v_CTRL-V| CTRL-V make Visual mode blockwise or stop Visual
mode
+|v_<Esc>| <Esc> stop Visual mode
|v_CTRL-]| CTRL-] jump to highlighted tag
|v_!| !{filter} 2 filter the highlighted lines through the
external command {filter}
-*map.txt* For Vim version 7.0aa. Last change: 2004 Dec 09
+*map.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
< "#i{CURSOR}" is expanded to "#include"
">#i{CURSOR}" is not expanded
>
- :ab ;; <endofline>"
+ :ab ;; <endofline>
< "test;;" is not expanded
"test ;;" is expanded to "test <endofline>"
how it should appear in your .exrc file, if you choose to go that
route. The first ^V is there to quote the second ^V; the :ab
command uses ^V as its own quote character, so you can include quoted
- whitespace or the | character in the abbreviation. The :ab command
+ whitespace or the | character in the abbreviation. The :ab command
doesn't do anything special with the ^[ character, so it doesn't need
to be quoted. (Although quoting isn't harmful; that's why typing 7
[but not 8!] ^Vs works.)
Later, when the abbreviation is expanded because the user typed in
the word "esc", the long form is subjected to the same type of
^V interpretation as keyboard input. So the ^V protects the ^[
- character from being interpreted as the "exit input-mode" character.
+ character from being interpreted as the "exit Insert mode" character.
Instead, the ^[ is inserted into the text.
Expands to: ^[
the script, it doesn't know in which script the function was defined. To
avoid this problem, use "<SID>" instead of "s:". The same translation is done
as for mappings. This makes it possible to define a call to the function in
-mapping.
+a mapping.
When a local function is executed, it runs in the context of the script it was
defined in. This means that new functions and mappings it defines can also
Replace <line1>-pu_|<line1>,<line2>d|r <args>|<line1>d
" Count the number of lines in the range
- :com! -range -nargs=0 Lines :echo <line2> - <line1> + 1 "lines"
+ :com! -range -nargs=0 Lines echo <line2> - <line1> + 1 "lines"
" Call a user function (example of <f-args>)
:com -nargs=* Mycmd call Myfunc(<f-args>)
-*motion.txt* For Vim version 7.0aa. Last change: 2004 Nov 23
+*motion.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
*'^* *`^*
'^ `^ To the position where the cursor was the last time
- when Insert mode was stopped This is used by the |gi|
- command. Not set when the |:keepjumps| command
+ when Insert mode was stopped. This is used by the
+ |gi| command. Not set when the |:keepjumps| command
modifier was used. {not in Vi}
*'.* *`.*
-*pi_expl.txt* For Vim version 7.0aa. Last change: 2002 Nov 08
+*pi_expl.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by M A Aziz Ahmed
The default for this is the setting of splitbelow at the time the plugin is
loaded.
-To control where the windows goes relative to the explorer window when
+To control where the window goes relative to the explorer window when
splitting vertically, use the variable: >
let g:explSplitRight=1 " Put new window to the right of the explorer
let g:explSplitRight=0 " Put new window to the left of the explorer
" current window
let g:explStartRight=0 " Put new explorer window to the left of the
" current window
-The default for this set to g:explSplitRight at the time the plugin is loaded.
+The default is the value of g:explSplitRight at the time the plugin is loaded.
To use a different split method for the explorer window, use: >
let g:explStartBelow=1 " Put new explorer window below the
" current window
let g:explStartBelow=0 " Put new explorer window above the
" current window
-The default for this set to g:explSplitBelow at the time the plugin is loaded.
+The default is the value of g:explSplitBelow at the time the plugin is loaded.
The start splits allow for the explorer window to be placed in a file browser
type arrangement, where the directories are shown on the left and the contents
:vi editing.txt /*:vi*
:vie editing.txt /*:vie*
:view editing.txt /*:view*
+:vim quickfix.txt /*:vim*
+:vimgrep quickfix.txt /*:vimgrep*
+:vimgrepa quickfix.txt /*:vimgrepa*
+:vimgrepadd quickfix.txt /*:vimgrepadd*
:visual editing.txt /*:visual*
:visual_example visual.txt /*:visual_example*
:viu various.txt /*:viu*
hebrew.txt hebrew.txt /*hebrew.txt*
help various.txt /*help*
help-context help.txt /*help-context*
-help-tags tags 1
help-translated various.txt /*help-translated*
help-xterm-window various.txt /*help-xterm-window*
help.txt help.txt /*help.txt*
new-utf-8 version6.txt /*new-utf-8*
new-vertsplit version6.txt /*new-vertsplit*
new-vim-server version6.txt /*new-vim-server*
+new-vimgrep version7.txt /*new-vimgrep*
new-virtedit version6.txt /*new-virtedit*
news intro.txt /*news*
nextnonblank() eval.txt /*nextnonblank()*
-*usr_40.txt* For Vim version 7.0aa. Last change: 2004 Feb 13
+*usr_40.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM USER MANUAL - by Bram Moolenaar
different. The <F2> mapping for Normal mode is still there. Thus you can map
the same key differently for each mode.
Notice that, although this mapping starts in Insert mode, it ends in Normal
-mode. If you want it to continue in Insert mode, append a "a" to the mapping.
+mode. If you want it to continue in Insert mode, append an "a" to the
+mapping.
Here is an overview of map commands and in which mode they work:
-*visual.txt* For Vim version 7.0aa. Last change: 2004 Jun 08
+*visual.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
after the Visual area, the character under the cursor is not included.
With "v" the text before the start position and after the end position will
-not be highlighted. However, All uppercase and non-alpha operators, except
+not be highlighted. However, all uppercase and non-alpha operators, except
"~" and "U", will work on whole lines anyway. See the list of operators
below.
If you want to highlight exactly the same area as the last time, you can use
"gv" |gv| |v_gv|.
+ *v_<Esc>*
+<Esc> In Visual mode: Stop Visual mode.
+
*v_CTRL-C*
CTRL-C In Visual mode: Stop Visual mode. When insert mode is
pending (the mode message shows
that window is adjusted, so that the same Visual area is still selected. This
is especially useful to view the start of the Visual area in one window, and
the end in another. You can then use <RightMouse> (or <S-LeftMouse> when
-'mousemodel' is "popup") to move either end of the Visual area.
+'mousemodel' is "popup") to drag either end of the Visual area.
==============================================================================
4. Operating on the Visual area *visual-operators*
Visual-block Examples *blockwise-examples*
With the following text, I will indicate the commands to produce the block and
the results below. In all cases, the cursor begins on the 'a' in the first
-line if the test text.
+line of the test text.
The following modeline settings are assumed ":ts=8:sw=4:".
It will be helpful to
-*windows.txt* For Vim version 7.0aa. Last change: 2004 Dec 21
+*windows.txt* For Vim version 7.0aa. Last change: 2004 Dec 29
VIM REFERENCE MANUAL by Bram Moolenaar
1 #h "/test/text" line 1 ~
2u "asdf" line 0 ~
- 3 %l+ "version.c" line 1 ~
+ 3 %a+ "version.c" line 1 ~
When the [!] is included the list will show unlisted buffers
(the term "unlisted" is a bit confusing then...).
" Author: Miles Lott <milos@groupwhere.org>
" URL: http://milosch.dyndns.org/php.vim
" Last Change: 2004 May 18
-" Version: 0.5
+" Version: 0.4
" Notes: Close all switches with default:\nbreak; and it will look better.
" Also, open and close brackets should be alone on a line.
" This is my preference, and the only way this will look nice.
" switch/case. It is nearly perfect for anyone regardless of your
" stance on brackets.
"
-" Changes: 0.5 - fix duplicate indent on open tag, and empty bracketed
-" statements.
-" 0.4 - Fixes for closing php tag, switch statement closure, and php_indent_shortopentags
+" Changes: Fixes for closing php tag, switch statement closure, and php_indent_shortopentags
" option from Steffen Bruentjen <vim@kontraphon.de>
"
" Options: php_noindent_switch=1 -- do not try to indent switch/case statements (version 0.1 behavior)
let pline = getline(lnum - 1) " previous to last line
let ind = indent(lnum)
- " Indent after php open tag
+ " Indent after php open tags
if line =~ '<?php'
let ind = ind + &sw
- elseif exists('g:php_indent_shortopentags')
- " indent after short open tag
+ " indent after short open tags
+ endif
+ if exists('g:php_indent_shortopentags')
if line =~ '<?'
let ind = ind + &sw
endif
endif
- " indent after php closing tag
if cline =~ '\M?>'
let ind = ind - &sw
endif
let ind = ind - &sw
endif
return ind
- else
- " Search the matching bracket (with searchpair()) and set the indent of
- " to the indent of the matching line.
- if cline =~ '^\s*}'
- call cursor(line('.'), 1)
- let ind = indent(searchpair('{', '', '}',
- 'bW', 'synIDattr(synID(line("."), col("."),
- 0), "name") =~? "string"'))
- return ind
- endif
- " Try to indent switch/case statements as well
+ else " Try to indent switch/case statements as well
" Indent blocks enclosed by {} or () or case statements, with some anal requirements
if line =~ 'case.*:\|[{(]\s*\(#[^)}]*\)\=$'
let ind = ind + &sw
" Search the matching bracket (with searchpair()) and set the indent of cline
" to the indent of the matching line.
if cline =~ '^\s*}'
- call cursor(line('. '), 1)
+ call cursor(line('.'), 1)
let ind = indent(searchpair('{', '', '}', 'bW', 'synIDattr(synID(line("."), col("."), 0), "name") =~? "string"'))
return ind
endif
-source <sfile>:p:h/menu_chinese(taiwan)_taiwan.950.vim
+source <sfile>:p:h/menu_chinese_taiwan.950.vim
-source <sfile>:p:h/menu_chinese(taiwan)_taiwan.950.vim
+source <sfile>:p:h/menu_chinese_taiwan.950.vim
" netrw.vim: Handles file transfer and remote directory listing across a network
-" last change: Dec 06, 2004
+" last change: Dec 29, 2004
" Maintainer: Charles E Campbell, Jr <drchipNOSPAM at campbellfamily dot biz>
-" Version: 53
+" Version: 54
" License: Vim License (see vim's :help license)
"
" But be doers of the Word, and not only hearers, deluding your own selves
if exists("g:loaded_netrw") || &cp
finish
endif
-let g:loaded_netrw = "v53"
+let g:loaded_netrw = "v54"
let s:save_cpo = &cpo
let loaded_explorer = 1
set cpo&vim
au BufReadCmd file://localhost/* exe "silent doau BufReadPre ".expand("<afile>")|exe 'e /'.substitute(expand("<afile>"),"file:/*","","")|exe "silent doau BufReadPost ".expand("<afile>")
endif
au BufReadCmd ftp://*,rcp://*,scp://*,http://*,dav://*,rsync://*,sftp://* exe "silent doau BufReadPre ".expand("<afile>")|exe "Nread 0r ".expand("<afile>")|exe "silent doau BufReadPost ".expand("<afile>")
- au FileReadCmd ftp://*,rcp://*,scp://*,http://*,dav://*,rsync://*,sftp://* exe "silent doau BufReadPre ".expand("<afile>")|exe "Nread " .expand("<afile>")|exe "silent doau
BufReadPost ".expand("<afile>")
+ au FileReadCmd ftp://*,rcp://*,scp://*,http://*,dav://*,rsync://*,sftp://* exe "silent doau BufReadPre ".expand("<afile>")|exe "Nread " .expand("<afile>")|exe "silent doau
FileReadPost ".expand("<afile>")
au BufWriteCmd ftp://*,rcp://*,scp://*,dav://*,rsync://*,sftp://* exe "silent doau BufWritePre ".expand("<afile>")|exe "Nwrite " .expand("<afile>")|exe "silent doau BufWritePost ".expand("<afile>")
- au FileWriteCmd ftp://*,rcp://*,scp://*,dav://*,rsync://*,sftp://* exe "silent doau BufWritePre ".expand("<afile>")|exe "'[,']Nwrite " .expand("<afile>")|exe "silent doau
BufWritePost ".expand("<afile>")
+ au FileWriteCmd ftp://*,rcp://*,scp://*,dav://*,rsync://*,sftp://* exe "silent doau BufWritePre ".expand("<afile>")|exe "'[,']Nwrite " .expand("<afile>")|exe "silent doau
FileWritePost ".expand("<afile>")
augroup END
endif
fun! <SID>NetRestorePosn()
" call Dfunc("NetRestorePosn() winnr=".s:netrw_winnr." line=".s:netrw_line." col=".s:netrw_col." hline=".s:netrw_hline)
+ " restore window
+" call Decho("restore window: exe silent! ".s:netrw_winnr."wincmd w")
exe "silent! ".s:netrw_winnr."wincmd w"
if v:shell_error == 0
" as suggested by Bram M: redraw on no error
" allows protocol error messages to remain visible
redraw!
endif
+
" restore top-of-screen line
+" call Decho("restore topofscreen: exe norm! ".s:netrw_hline."G0z")
exe "norm! ".s:netrw_hline."G0z\<CR>"
+
" restore position
+" call Decho("restore posn: exe norm! ".s:netrw_line."G0".s:netrw_col."|")
exe "norm! ".s:netrw_line."G0".s:netrw_col."\<bar>"
" call Dret("NetRestorePosn")
" call Decho("(copied) fname<".fname.">")
endif
- " get the file, but disable undo when reading a new buffer
if a:readcmd[0] == '0'
- let use_e_cmd = 0 " 1 when using ':edit'
- let delline = 0 " 1 when have to delete empty last line
- if line("$") == 1 && getline(1) == ""
- " Now being asked to 0r a file into an empty file.
- " Safe to :e it instead, unless there is another window on the same buffer.
- let curbufnr = bufnr("%")
- let use_e_cmd = 1
- let delline = 1
- " Loop over all windows,
- " reset use_e_cmd when another one is editing the current buffer.
- let i = 1
- while 1
- if i != winnr() && winbufnr(i) == curbufnr
- let use_e_cmd = 0
- break
- endif
- let i = i + 1
- if winbufnr(i) < 0
- break
- endif
- endwhile
- endif
-
- if use_e_cmd > 0
- " ':edit' the temp file, wipe out the old buffer and rename the buffer
- let curfilename = expand("%")
-
- let binlocal = &l:bin
- let binglobal = &g:bin
- if binlocal
- setglobal bin " Need to set 'bin' globally for ":e" command.
- endif
- silent exe "e! ".v:cmdarg." ".fname
- if binlocal && !binglobal
- setglobal nobin
- setlocal bin
- endif
-
- exe curbufnr . "bwipe!"
- exe "f ".escape(curfilename," ")
- " the ":f newname" apparently leaves the temporary file as the alternate
- " file in the buffer list (see :ls!). The following command wipes it out.
- exe bufnr("#")."bwipe!"
- else
- let oldul= &ul
- setlocal ul=-1
- exe a:readcmd." ".v:cmdarg." ".escape(fname," ")
- if delline > 0
- " wipe out last line, which should be a blank line anyway
- $del
- endif
- let &ul= oldul
- endif
+ " get file into buffer
+ " record remote filename
+ let rfile= bufname("%")
+" call Decho("edit remotefile<".rfile.">")
+ " rename the current buffer to the temp file (ie. fname)
+ exe "keepalt file ".fname
+ " edit temporary file
+ e
+ " rename buffer back to remote filename
+ exe "keepalt file ".rfile
+ " wipe out the buffer with the temp file name
+ exe "bwipe ".fname
+ let line1 = 1
+ let line2 = line("$")
+
elseif filereadable(fname)
-" call Decho("exe<".a:readcmd." ".v:cmdarg." ".fname.">")
+ " read file after current line
+ let curline = line(".")
+ let lastline= line("$")
+" call Decho("exe<".a:readcmd." ".v:cmdarg." ".fname."> line#".curline)
exe a:readcmd." ".v:cmdarg." ".fname
+ let line1 = curline + 1
+ let line2 = line("$") - lastline + 1
+ let s:netrw_line = s:netrw_line + 1
+ let s:netrw_col = 1
else
-" call Dret("NetGetFile")
+ " not readable
+" call Dret("NetGetFile : fname<".fname."> not readable")
return
endif
" User-provided (ie. optional) fix-it-up command
if exists("*NetReadFixup")
- let line1= line(".")
- if a:readcmd == "r"
- let line2= line("$") - line2 + line1
- else
- let line2= line("$") - line2
- endif
" call Decho("calling NetReadFixup(method<".a:method."> line1=".line1." line2=".line2.")")
call NetReadFixup(a:method, line1, line2)
endif
" call Decho("scp://...")
let b:netrw_method = 4
let g:netrw_machine= substitute(a:choice,scpurm,'\1',"")
- let b:netrw_port = substitute(a:choice,scpurm,'\2',"")
+ let g:netrw_port = substitute(a:choice,scpurm,'\2',"")
let b:netrw_fname = substitute(a:choice,scpurm,'\3',"")
" http://user@hostname/...path-to-file
let g:netrw_machine= substitute(a:choice,ftpurm,'\3',"")
let g:netrw_port = substitute(a:choice,ftpurm,'\4',"")
let b:netrw_fname = substitute(a:choice,ftpurm,'\5',"")
- if g:netrw_port != ""
- let g:netrw_port = substitute(g:netrw_port,"[#:]","","")
- endif
if userid != ""
let g:netrw_uid= userid
endif
endif
let b:netrw_method = -1
endif
+
+ " remove any leading [:#] from port number
+ if g:netrw_port != ""
+ let g:netrw_port = substitute(g:netrw_port,'[#:]\+','','')
+ endif
" call Decho("a:choice <".a:choice.">")
" call Decho("b:netrw_method <".b:netrw_method.">")
# automatically be used if it is found. If you have GNOME, but do not want to
# use it (e.g., want a GTK-only version), then use --enable-gui=gtk.
#
+# KDE doesn't fully work, unfortunately. See the todo list.
+#
# If the selected GUI isn't found, the GUI is disabled automatically
#CONF_OPT_GUI = --enable-gui=gtk
#CONF_OPT_GUI = --enable-gui=gtk --disable-gtktest
#endif
buf->b_u_synced = TRUE;
buf->b_flags = BF_CHECK_RO | BF_NEVERLOADED;
+ if (flags & BLN_DUMMY)
+ buf->b_flags |= BF_DUMMY;
buf_clear_file(buf);
clrallmarks(buf); /* clear marks */
fmarks_check_names(buf); /* check file marks for this file */
}
}
+#if defined(FEAT_QUICKFIX) || defined(FEAT_EVAL) || defined(PROTO)
+/*
+ * Find file in buffer list by name (it has to be for the current window).
+ * Returns NULL if not found.
+ */
+ buf_T *
+buflist_findname_exp(fname)
+ char_u *fname;
+{
+ char_u *ffname;
+ buf_T *buf = NULL;
+
+ /* First make the name into a full path name */
+ ffname = FullName_save(fname,
+#ifdef UNIX
+ TRUE /* force expansion, get rid of symbolic links */
+#else
+ FALSE
+#endif
+ );
+ if (ffname != NULL)
+ {
+ buf = buflist_findname(ffname);
+ vim_free(ffname);
+ }
+ return buf;
+}
+#endif
+
/*
* Find file in buffer list by name (it has to be for the current window).
* "ffname" must have a full path.
+ * Skips dummy buffers.
+ * Returns NULL if not found.
*/
buf_T *
buflist_findname(ffname)
/*
* Same as buflist_findname(), but pass the stat structure to avoid getting it
* twice for the same file.
+ * Returns NULL if not found.
*/
static buf_T *
buflist_findname_stat(ffname, stp)
buf_T *buf;
for (buf = firstbuf; buf != NULL; buf = buf->b_next)
- if (!otherfile_buf(buf, ffname
+ if ((buf->b_flags & BF_DUMMY) == 0 && !otherfile_buf(buf, ffname
#ifdef UNIX
, stp
#endif
setfname(buf, ffname, sfname, message)
buf_T *buf;
char_u *ffname, *sfname;
- int message;
+ int message; /* give message when buffer already exists */
{
- buf_T *obuf;
+ buf_T *obuf = NULL;
#ifdef UNIX
struct stat st;
#endif
#ifdef UNIX
if (mch_stat((char *)ffname, &st) < 0)
st.st_dev = (dev_T)-1;
- obuf = buflist_findname_stat(ffname, &st);
+#endif
+ if (!(buf->b_flags & BF_DUMMY))
+#ifdef UNIX
+ obuf = buflist_findname_stat(ffname, &st);
#else
- obuf = buflist_findname(ffname);
+ obuf = buflist_findname(ffname);
#endif
if (obuf != NULL && obuf != buf)
{
}
/*
- * return TRUE if 'c' is a normal identifier character
- * letters and characters from 'isident' option.
+ * Return TRUE if 'c' is a normal identifier character:
+ * Letters and characters from the 'isident' option.
*/
int
vim_isIDc(c)
AC_MSG_RESULT(GTK+ 2 GUI selected; fontset has been disabled)
enable_fontset="no"
fi
+if test "x$GUITYPE:$enable_fontset" = "xKDE:yes"; then
+ AC_MSG_RESULT(KDE GUI selected; fontset has been disabled)
+ enable_fontset="no"
+fi
dnl There is no test for the BeOS GUI, if it's selected it's used
if test -z "$SKIP_BEOS"; then
*/
if ((ea.cmdidx == CMD_make
|| ea.cmdidx == CMD_grep || ea.cmdidx == CMD_grepadd)
- && !grep_internal(&ea))
+ && !grep_internal(ea.cmdidx))
{
char_u *new_cmdline;
char_u *program;
p++;
xp->xp_pattern = p;
- if (argt & XFILE)
+ if ((argt & XFILE)
+#ifdef FEAT_QUICKFIX
+ || cmdidx == CMD_vimgrep
+ || cmdidx == CMD_vimgrepadd
+ || grep_internal(cmdidx)
+#endif
+ )
{
int in_quote = FALSE;
char_u *bow = NULL; /* Beginning of word */
p = eap->arg;
#ifdef FEAT_QUICKFIX
- if (eap->cmdidx == CMD_vimgrep
- || eap->cmdidx == CMD_vimgrepadd
- || grep_internal(eap))
+ if (*p != NUL && (eap->cmdidx == CMD_vimgrep
+ || eap->cmdidx == CMD_vimgrepadd
+ || grep_internal(eap->cmdidx)))
{
/* Skip over the pattern. */
- p = skip_regexp(p + 1, *p, TRUE, NULL);
- if (*p == *eap->arg)
- ++p;
+ if (vim_isIDc(*p))
+ p = skiptowhite(p);
+ else
+ {
+ p = skip_regexp(p + 1, *p, TRUE, NULL);
+ if (*p == *eap->arg)
+ ++p;
+ }
}
#endif
}
#endif
-#if (defined(FEAT_XIM) && defined(FEAT_GUI_GTK)) || defined(PROTO)
+#if (defined(FEAT_XIM) && (defined(FEAT_GUI_GTK) || defined(FEAT_GUI_KDE))) \
+ || defined(PROTO)
/*
* Return the virtual column number at the current cursor position.
* This is used by the IM code to obtain the start of the preedit string.
* +xfontset X fontset support. For outputting wide characters.
*/
#ifndef FEAT_XFONTSET
-# if defined(FEAT_MBYTE) && defined(HAVE_X11) && !defined(HAVE_GTK2)
+# if defined(FEAT_MBYTE) && defined(HAVE_X11) \
+ && !defined(HAVE_GTK2) && !defined(FEAT_GUI_KDE)
# define FEAT_XFONTSET
# else
/* # define FEAT_XFONTSET */
|| defined(FEAT_NETBEANS_INTG))
# define FEAT_BEVAL
# if !defined(FEAT_XFONTSET) && !defined(FEAT_GUI_GTK) \
- && !defined(FEAT_GUI_W32)
+ && !defined(FEAT_GUI_KDE) && !defined(FEAT_GUI_W32)
# define FEAT_XFONTSET
# endif
#endif
#ifdef FEAT_XIM
# ifdef FEAT_GUI_KDE
EXTERN colnr_T preedit_start_col INIT(= MAXCOL);
+EXTERN colnr_T preedit_end_col INIT(= MAXCOL);
EXTERN char *draw_feedback INIT(= NULL);
# endif
# ifdef FEAT_GUI_GTK
long_u hl_mask_todo;
guicolor_T fg_color;
guicolor_T bg_color;
-#if !defined(MSWIN16_FASTTEXT) && !defined(HAVE_GTK2)
+#if !defined(MSWIN16_FASTTEXT) && !defined(HAVE_GTK2) && !defined(FEAT_GUI_KDE)
GuiFont font = NOFONT;
# ifdef FEAT_XFONTSET
GuiFontset fontset = NOFONTSET;
highlight_mask = gui.highlight_mask;
hl_mask_todo = highlight_mask;
-#if !defined(MSWIN16_FASTTEXT) && !defined(HAVE_GTK2)
+#if !defined(MSWIN16_FASTTEXT) && !defined(HAVE_GTK2) && !defined(FEAT_GUI_KDE)
/* Set the font */
if (aep != NULL && aep->ae_u.gui.font != NOFONT)
font = aep->ae_u.gui.font;
/* print the string so far if it's the last character or there is
* a composing character. */
if (i + cl >= len || (comping && i > start) || dowide
-# if defined(FEAT_GUI_X11) || defined(FEAT_GUI_GTK) || defined (FEAT_GUI_KDE)
+# if defined(FEAT_GUI_X11) || defined(FEAT_GUI_GTK) || defined(FEAT_GUI_KDE)
|| (cn > 1
# ifdef FEAT_XFONTSET
/* No fontset: At least draw char after wide char at
cells = 0;
if (dowide)
{
+#ifndef FEAT_GUI_KDE
gui_mch_set_font(gui.wide_font);
+#endif
gui_mch_draw_string(gui.row, scol - cn,
s + start, cl, draw_flags);
+#ifndef FEAT_GUI_KDE
gui_mch_set_font(font);
+#endif
start += cl;
}
char_u full_pathname[MAXPATHL + 1];
if (gui_find_bitmap(name, full_pathname, "xpm") == OK)
- {
return QPixmap((const char *)full_pathname);
- }
else
return QPixmap();
}//}}}
#endif
void
-gui_mch_add_menu(vimmenu_T * menu, int idx)//{{{
+gui_mch_add_menu(vimmenu_T *menu, int idx)//{{{
{
#ifdef FEAT_MENU
QPopupMenu *me;
if (menu_is_popup(menu->name))
{
- menu->widget = new QPopupMenu(vmw , (const char *)menu->name);
+ menu->widget = new QPopupMenu(vmw , QSTR(menu->name));
QObject::connect(menu->widget, SIGNAL(activated(int)), vmw,
SLOT(menu_activated(int)));
return;
if (parent)
{
idx++; // for tearoffs to be first in menus
- me = new QPopupMenu(parent->widget, (const char *)menu->name);
- parent->widget->insertItem(QString((const char *)menu->name), me,
- (int)me, idx);
+ me = new QPopupMenu(parent->widget, QSTR(menu->name));
+ parent->widget->insertItem(QSTR(menu->name), me, (int)me, idx);
}
else
{
- me = new QPopupMenu(vmw->menuBar() , (const char *)menu->name);
- vmw->menuBar()->insertItem(QString((const char *)menu->name), me,
- (int)me, idx);
+ me = new QPopupMenu(vmw->menuBar(), QSTR(menu->name));
+ vmw->menuBar()->insertItem(QSTR(menu->name), me, (int)me, idx);
}
me->setCaption((const char *)(menu->dname));
void
-gui_mch_add_menu_item(vimmenu_T * menu, int idx)//{{{
+gui_mch_add_menu_item(vimmenu_T *menu, int idx)//{{{
{
#ifdef FEAT_MENU
vimmenu_T *parent = menu->parent;
pix,
(int)menu, // id
true,
- (char *)(menu->strings[MENU_INDEX_TIP]), // tooltip or text
+ QSTR(menu->strings[MENU_INDEX_TIP]), // tooltip or text
idx);
menu->parent=parent;
return;
parent->widget->insertSeparator();
return;
}
- parent->widget->insertItem(QString((const char *)menu->name), (int)menu, idx);
+ parent->widget->insertItem(QSTR(menu->name), (int)menu, idx);
#endif
}//}}}
void
gui_mch_toggle_tearoffs(int enable)//{{{
{
- vmw->have_tearoff=enable;
- toggle_tearoffs(root_menu, enable);
+ vmw->have_tearoff=enable;
+ toggle_tearoffs(root_menu, enable);
}//}}}
#endif
* Destroy the machine specific menu widget.
*/
void
-gui_mch_destroy_menu(vimmenu_T * menu)//{{{
+gui_mch_destroy_menu(vimmenu_T *menu)//{{{
{
#ifdef FEAT_TOOLBAR
if (menu->parent && menu_is_toolbar(menu->parent->name))
{
if (!sb->w)
return;
+
//we add the menubar and toolbar height/width
int X = 0;
int Y = 0;
}//}}}
void
-gui_mch_destroy_scrollbar(scrollbar_T * sb)//{{{
+gui_mch_destroy_scrollbar(scrollbar_T *sb)//{{{
{
sbpool->destroy(sb);
}//}}}
/*ARGSUSED*/
char_u *
gui_mch_browse(int saving,//{{{
- char_u * title,
- char_u * dflt,
- char_u * ext,
- char_u * initdir,
- char_u * filter)
+ char_u *title,
+ char_u *dflt,
+ char_u *ext,
+ char_u *initdir,
+ char_u *filter)
{
char *filt_glob;
QString s;
if (!saving)
- s = KFileDialog::getOpenFileName((char *)initdir, (char *)filt_glob,
- vmw, (char *)title);
+ s = KFileDialog::getOpenFileName(QSTR(initdir), QSTR(filt_glob),
+ vmw, QSTR(title));
else
s = KFileDialog::getSaveFileName();
char_u *title, /* title of dialog */
char_u *message, /* message text */
char_u *buttons, /* names of buttons */
- int def_but, /* default button */
+ int def_but, /* default button */
char_u *textfield)
{
gui_mch_mousehide(FALSE);
#if defined(FEAT_MENU) || defined(PROTO)
void
-gui_mch_show_popupmenu(vimmenu_T * menu)//{{{
+gui_mch_show_popupmenu(vimmenu_T *menu)//{{{
{
menu->widget->popup(QCursor::pos());
}//}}}
char_u code1;
} special_keys[] =
{
- { Qt::Key_Up, 'k', 'u' },
- { Qt::Key_Down, 'k', 'd' },
- { Qt::Key_Left, 'k', 'l' },
- { Qt::Key_Right, 'k', 'r' },
- { Qt::Key_F1, 'k', '1' },
- { Qt::Key_F2, 'k', '2' },
- { Qt::Key_F3, 'k', '3' },
- { Qt::Key_F4, 'k', '4' },
- { Qt::Key_F5, 'k', '5' },
- { Qt::Key_F6, 'k', '6' },
- { Qt::Key_F7, 'k', '7' },
- { Qt::Key_F8, 'k', '8' },
- { Qt::Key_F9, 'k', '9' },
- { Qt::Key_F10, 'k', ';' },
- { Qt::Key_F11, 'F', '1' },
- { Qt::Key_F12, 'F', '2' },
- { Qt::Key_F13, 'F', '3' },
- { Qt::Key_F14, 'F', '4' },
- { Qt::Key_F15, 'F', '5' },
- { Qt::Key_F16, 'F', '6' },
- { Qt::Key_F17, 'F', '7' },
- { Qt::Key_F18, 'F', '8' },
- { Qt::Key_F19, 'F', '9' },
- { Qt::Key_F20, 'F', 'A' },
- { Qt::Key_F21, 'F', 'B' },
- { Qt::Key_F22, 'F', 'C' },
- { Qt::Key_F23, 'F', 'D' },
- { Qt::Key_F24, 'F', 'E' },
- { Qt::Key_F25, 'F', 'F' },
- { Qt::Key_F26, 'F', 'G' },
- { Qt::Key_F27, 'F', 'H' },
- { Qt::Key_F28, 'F', 'I' },
- { Qt::Key_F29, 'F', 'J' },
- { Qt::Key_F30, 'F', 'K' },
- { Qt::Key_F31, 'F', 'L' },
- { Qt::Key_F32, 'F', 'M' },
- { Qt::Key_F33, 'F', 'N' },
- { Qt::Key_F34, 'F', 'O' },
- { Qt::Key_F35, 'F', 'P' },
- { Qt::Key_Help, '%', '1' },
- // { Qt::Key_Undo, '&', '8' }, <= hmmm ?
- { Qt::Key_BackSpace, 'k', 'b' },
- { Qt::Key_Insert, KS_EXTRA, KE_KINS },
- { Qt::Key_Delete, KS_EXTRA, KE_KDEL },
- { Qt::Key_Home, 'K', '1' },
- { Qt::Key_End, 'K', '4' },
- { Qt::Key_Prior, 'K', '3' },
- { Qt::Key_Next, 'K', '5' },
- { Qt::Key_Print, '%', '9' },
-
- { Qt::Key_Plus, 'K', '6'},
- { Qt::Key_Minus, 'K', '7'},
- { Qt::Key_Slash, 'K', '8'},
- { Qt::Key_multiply, 'K', '9'},
- { Qt::Key_Enter, 'K', 'A'},
- { Qt::Key_Period, 'K', 'B'},
-
- { Qt::Key_0, 'K', 'C'},
- { Qt::Key_1, 'K', 'D'},
- { Qt::Key_2, 'K', 'E'},
- { Qt::Key_3, 'K', 'F'},
- { Qt::Key_4, 'K', 'G'},
- { Qt::Key_5, 'K', 'H'},
- { Qt::Key_6, 'K', 'I'},
- { Qt::Key_7, 'K', 'J'},
- { Qt::Key_8, 'K', 'K'},
- { Qt::Key_9, 'K', 'L'},
+ {Qt::Key_Up, 'k', 'u'},
+ {Qt::Key_Down, 'k', 'd'},
+ {Qt::Key_Left, 'k', 'l'},
+ {Qt::Key_Right, 'k', 'r'},
+ {Qt::Key_F1, 'k', '1'},
+ {Qt::Key_F2, 'k', '2'},
+ {Qt::Key_F3, 'k', '3'},
+ {Qt::Key_F4, 'k', '4'},
+ {Qt::Key_F5, 'k', '5'},
+ {Qt::Key_F6, 'k', '6'},
+ {Qt::Key_F7, 'k', '7'},
+ {Qt::Key_F8, 'k', '8'},
+ {Qt::Key_F9, 'k', '9'},
+ {Qt::Key_F10, 'k', ';'},
+ {Qt::Key_F11, 'F', '1'},
+ {Qt::Key_F12, 'F', '2'},
+ {Qt::Key_F13, 'F', '3'},
+ {Qt::Key_F14, 'F', '4'},
+ {Qt::Key_F15, 'F', '5'},
+ {Qt::Key_F16, 'F', '6'},
+ {Qt::Key_F17, 'F', '7'},
+ {Qt::Key_F18, 'F', '8'},
+ {Qt::Key_F19, 'F', '9'},
+ {Qt::Key_F20, 'F', 'A'},
+ {Qt::Key_F21, 'F', 'B'},
+ {Qt::Key_F22, 'F', 'C'},
+ {Qt::Key_F23, 'F', 'D'},
+ {Qt::Key_F24, 'F', 'E'},
+ {Qt::Key_F25, 'F', 'F'},
+ {Qt::Key_F26, 'F', 'G'},
+ {Qt::Key_F27, 'F', 'H'},
+ {Qt::Key_F28, 'F', 'I'},
+ {Qt::Key_F29, 'F', 'J'},
+ {Qt::Key_F30, 'F', 'K'},
+ {Qt::Key_F31, 'F', 'L'},
+ {Qt::Key_F32, 'F', 'M'},
+ {Qt::Key_F33, 'F', 'N'},
+ {Qt::Key_F34, 'F', 'O'},
+ {Qt::Key_F35, 'F', 'P'},
+ {Qt::Key_Help, '%', '1'},
+ // { Qt::Key_Undo, '&', '8'}, <= hmmm ?
+ {Qt::Key_BackSpace, 'k', 'b'},
+ {Qt::Key_Insert, KS_EXTRA, KE_KINS },
+ {Qt::Key_Delete, KS_EXTRA, KE_KDEL },
+ {Qt::Key_Home, 'K', '1'},
+ {Qt::Key_End, 'K', '4'},
+ {Qt::Key_Prior, 'K', '3'},
+ {Qt::Key_Next, 'K', '5'},
+ {Qt::Key_Print, '%', '9'},
+
+ {Qt::Key_Plus, 'K', '6'},
+ {Qt::Key_Minus, 'K', '7'},
+ {Qt::Key_Slash, 'K', '8'},
+ {Qt::Key_multiply, 'K', '9'},
+ {Qt::Key_Enter, 'K', 'A'},
+ {Qt::Key_Period, 'K', 'B'},
+
+ {Qt::Key_0, 'K', 'C'},
+ {Qt::Key_1, 'K', 'D'},
+ {Qt::Key_2, 'K', 'E'},
+ {Qt::Key_3, 'K', 'F'},
+ {Qt::Key_4, 'K', 'G'},
+ {Qt::Key_5, 'K', 'H'},
+ {Qt::Key_6, 'K', 'I'},
+ {Qt::Key_7, 'K', 'J'},
+ {Qt::Key_8, 'K', 'K'},
+ {Qt::Key_9, 'K', 'L'},
+
/* End of list marker: */
- { 0, 0, 0 }
+ {0, 0, 0}
};//}}}
#ifdef FEAT_CLIENTSERVER
-typedef int (*QX11EventFilter) (XEvent*);
-extern QX11EventFilter qt_set_x11_event_filter (QX11EventFilter filter);
-static QX11EventFilter oldFilter = 0;
-static int kvim_x11_event_filter( XEvent* e);
+typedef int (*QX11EventFilter)(XEvent*);
+extern QX11EventFilter qt_set_x11_event_filter(QX11EventFilter filter);
+static QX11EventFilter oldFilter = 0;
+static int kvim_x11_event_filter(XEvent* e);
#endif
-void gui_keypress(QKeyEvent *e);
+void gui_keypress(QKeyEvent *e);
/*
* Return OK if the key with the termcap name "name" is supported.
/*
* custom Frame for drawing ...
*/
-void VimWidget::paintEvent(QPaintEvent *e)//{{{
+ void
+VimWidget::paintEvent(QPaintEvent *e)//{{{
{
QRect r = e->rect();
gui_redraw(r.x(), r.y(), r.width(), r.height());
}//}}}
-void VimWidget::draw_string(int x, int y, QString s, int len, int flags)//{{{
+ void
+VimWidget::draw_string(int x, int y, QString s, int len, int flags)//{{{
{
gui.current_font->setBold(flags & DRAW_BOLD);
gui.current_font->setUnderline(flags & DRAW_UNDERL);
gui.current_font->setItalic(flags & DRAW_ITALIC);
- painter->setBackgroundMode(flags & DRAW_TRANSP ? Qt::TransparentMode : Qt::OpaqueMode);
+ painter->setBackgroundMode(flags & DRAW_TRANSP
+ ? Qt::TransparentMode : Qt::OpaqueMode);
painter->setFont(*(gui.current_font));
painter->drawText(x, y, s, len);
}//}}}
-void VimWidget::mousePressEvent(QMouseEvent *event)//{{{
+ void
+VimWidget::mousePressEvent(QMouseEvent *event)//{{{
{
- int button=0;
- int modifiers=0;
+ int button = 0;
+ int modifiers = 0;
ButtonState state = event->state();
ButtonState buttons = event->button();
modifiers |= MOUSE_CTRL;
if (state & QMouseEvent::AltButton)
modifiers |= MOUSE_ALT;
- gui_send_mouse_event(button,event->x(),event->y(),FALSE,modifiers);
+ gui_send_mouse_event(button, event->x(), event->y(), FALSE, modifiers);
#if QT_VERSION>=300
QByteArray params;
QDataStream stream(params, IO_WriteOnly);
- stream << kapp->dcopClient()->appId() << button << modifiers << gui.row << gui.col;
- kapp->dcopClient()->emitDCOPSignal("mousePEvent(QCString,int,int,int,int)", params);
+ stream << kapp->dcopClient()->appId() << button << modifiers
+ << gui.row << gui.col;
+ kapp->dcopClient()->emitDCOPSignal(
+ "mousePEvent(QCString, int, int, int, int)", params);
#endif
event->accept();
}//}}}
#if defined(FEAT_SESSION)
-void VimMainWindow::saveGlobalProperties (KConfig *conf)
+ void
+VimMainWindow::saveGlobalProperties(KConfig *conf)
{
//we write a mksession file to a file written in the user's ~/.kde/share/config/
//the name of the file in saved in 'conf'
#endif
}
-void VimMainWindow::readGlobalProperties (KConfig *conf)
+ void
+VimMainWindow::readGlobalProperties (KConfig *conf)
{
#if 0
QString filename = conf->readPathEntry("sessionfile");
}
#endif
-void VimMainWindow::wheelEvent (QWheelEvent *event)//{{{
+ void
+VimMainWindow::wheelEvent (QWheelEvent *event)//{{{
{
ButtonState state = event->state();
- int button=0;
- int modifiers=0;
+ int button = 0;
+ int modifiers = 0;
- if (event->delta()>0)
- button|=MOUSE_4;
- else button|=MOUSE_5;
+ if (event->delta() > 0)
+ button |= MOUSE_4;
+ else button |= MOUSE_5;
if (state & ShiftButton)
- modifiers|=MOUSE_SHIFT;
+ modifiers |= MOUSE_SHIFT;
if (state & ControlButton)
- modifiers|=MOUSE_CTRL;
+ modifiers |= MOUSE_CTRL;
if (state & AltButton)
- modifiers|=MOUSE_ALT;
+ modifiers |= MOUSE_ALT;
- gui_send_mouse_event(button,event->x(),event->y(),FALSE,modifiers);
+ gui_send_mouse_event(button, event->x(), event->y(), FALSE, modifiers);
#if QT_VERSION>=300
QByteArray params;
QDataStream stream(params, IO_WriteOnly);
- stream << kapp->dcopClient()->appId() << button << modifiers << gui.row << gui.col;
- kapp->dcopClient()->emitDCOPSignal("mouseWhlEvent(QCString, int, int,int,int)", params);
+ stream << kapp->dcopClient()->appId() << button << modifiers
+ << gui.row << gui.col;
+ kapp->dcopClient()->emitDCOPSignal(
+ "mouseWhlEvent(QCString, int, int, int, int)", params);
#endif
event->accept();
}//}}}
-void VimWidget::mouseDoubleClickEvent(QMouseEvent *event)//{{{
+ void
+VimWidget::mouseDoubleClickEvent(QMouseEvent *event)//{{{
{
ButtonState state = event->state();
ButtonState buttons = event->button();
- int modifiers=0;
- int button=0;
+ int modifiers = 0;
+ int button = 0;
//Look at button states
if (buttons & LeftButton)
- button|=MOUSE_LEFT;
+ button |= MOUSE_LEFT;
if (buttons & RightButton)
- button|=MOUSE_RIGHT;
+ button |= MOUSE_RIGHT;
if (buttons & MidButton)
- button|=MOUSE_MIDDLE;
+ button |= MOUSE_MIDDLE;
//Look for keyboard modifiers
if (state & ShiftButton)
- modifiers|=MOUSE_SHIFT;
+ modifiers |= MOUSE_SHIFT;
if (state & ControlButton)
- modifiers|=MOUSE_CTRL;
+ modifiers |= MOUSE_CTRL;
if (state & AltButton)
- modifiers|=MOUSE_ALT;
+ modifiers |= MOUSE_ALT;
- gui_send_mouse_event(button,event->x(),event->y(),TRUE,modifiers);
+ gui_send_mouse_event(button, event->x(), event->y(), TRUE, modifiers);
#if QT_VERSION>=300
QByteArray params;
QDataStream stream(params, IO_WriteOnly);
- stream << kapp->dcopClient()->appId() << button << modifiers << gui.row << gui.col;
- kapp->dcopClient()->emitDCOPSignal("mouseDblClickEvent(QCString, int, int,int,int)", params);
+ stream << kapp->dcopClient()->appId() << button << modifiers
+ << gui.row << gui.col;
+ kapp->dcopClient()->emitDCOPSignal(
+ "mouseDblClickEvent(QCString, int, int, int, int)", params);
#endif
event->accept();
}//}}}
-void VimWidget::mouseMoveEvent(QMouseEvent *event){//{{{
+ void
+VimWidget::mouseMoveEvent(QMouseEvent *event)//{{{
+{
ButtonState state = event->state();
- int modifiers=0;
- int button=0;
+ int modifiers = 0;
+ int button = 0;
gui_mch_mousehide(FALSE);
//Look at button states
//warning: we use state here, this is important !
- if (state & QMouseEvent::LeftButton || state & QMouseEvent::RightButton || state & QMouseEvent::MidButton)
- button|=MOUSE_DRAG;
+ if (state & QMouseEvent::LeftButton
+ || state & QMouseEvent::RightButton
+ || state & QMouseEvent::MidButton)
+ button |= MOUSE_DRAG;
//Look for keyboard modifiers
if (state & ShiftButton)
- modifiers|=MOUSE_SHIFT;
+ modifiers |= MOUSE_SHIFT;
if (state & ControlButton)
- modifiers|=MOUSE_CTRL;
+ modifiers |= MOUSE_CTRL;
if (state & AltButton)
- modifiers|=MOUSE_ALT;
- if (button!=MOUSE_DRAG)
- gui_mouse_moved(event->x(),event->y());
+ modifiers |= MOUSE_ALT;
+ if (button != MOUSE_DRAG)
+ gui_mouse_moved(event->x(), event->y());
else
- gui_send_mouse_event(MOUSE_DRAG,event->x(),event->y(),FALSE,modifiers);
+ gui_send_mouse_event(MOUSE_DRAG, event->x(), event->y(),
+ FALSE, modifiers);
}//}}}
-void VimWidget::mouseReleaseEvent(QMouseEvent *event)//{{{
+ void
+VimWidget::mouseReleaseEvent(QMouseEvent *event)//{{{
{
ButtonState state = event->state();
- int modifiers=0;
+ int modifiers = 0;
//Look for keyboard modifiers
if (state & ShiftButton)
- modifiers|=MOUSE_SHIFT;
+ modifiers |= MOUSE_SHIFT;
if (state & ControlButton)
- modifiers|=MOUSE_CTRL;
+ modifiers |= MOUSE_CTRL;
if (state & AltButton)
- modifiers|=MOUSE_ALT;
+ modifiers |= MOUSE_ALT;
- gui_send_mouse_event(MOUSE_RELEASE,event->x(),event->y(),FALSE,modifiers);
+ gui_send_mouse_event(MOUSE_RELEASE, event->x(), event->y(),
+ FALSE, modifiers);
event->accept();
}//}}}
/*
* The main widget (everything but toolbar/menubar)
*/
- VimWidget::VimWidget( QWidget *parent, const char *name, WFlags f )//{{{
-:QWidget(parent, name, f)
- ,DCOPObject("KVim")
+VimWidget::VimWidget(QWidget *parent, const char *name, WFlags f)//{{{
+ :QWidget(parent, name, f)
+ , DCOPObject("KVim")
#ifdef FEAT_MZSCHEME
- ,mzscheme_timer_id(-1)
+ , mzscheme_timer_id(-1)
#endif
{
//to be able to show/hide the cursor when moving the mouse
setMouseTracking(true);
- painter=new QPainter(this);
+ painter = new QPainter(this);
setKeyCompression(true);
- setFocusPolicy( QWidget::StrongFocus );
+ setFocusPolicy(QWidget::StrongFocus);
setAcceptDrops(TRUE); // DND
blink_state = BLINK_NONE;
blink_on_time = 700;
blink_off_time = 400;
blink_wait_time = 250;
- connect( &blink_timer, SIGNAL( timeout() ), SLOT( blink_cursor() ));
- connect( &wait_timer, SIGNAL( timeout() ), SLOT ( wait_timeout() ));
+ connect( &blink_timer, SIGNAL(timeout()), SLOT(blink_cursor()));
+ connect( &wait_timer, SIGNAL(timeout()), SLOT(wait_timeout()));
+ setInputMethodEnabled(true);
}//}}}
-void VimWidget::execNormal(QString command)//{{{
+ void
+VimWidget::execNormal(QString command)//{{{
{
QString cmd("execute 'normal ");
- cmd+=command;
- cmd+="'";
+ cmd += command;
+ cmd += "'";
QCString unistring = vmw->codec->fromUnicode(cmd);
do_cmdline_cmd((char_u *)(const char*)unistring);
gui_update_screen();
}//}}}
-void VimWidget::execInsert(QString command)//{{{
+ void
+VimWidget::execInsert(QString command)//{{{
{
QString cmd("execute 'normal i");
- cmd+=command;
- cmd+="'";
+ cmd += command;
+ cmd += "'";
QCString unistring = vmw->codec->fromUnicode(cmd);
do_cmdline_cmd((char_u *)(const char*)unistring);
gui_update_screen();
}//}}}
-void VimWidget::execRaw(QString command)//{{{
+ void
+VimWidget::execRaw(QString command)//{{{
{
QString cmd("execute '");
- cmd+=command;
- cmd+="'";
+ cmd += command;
+ cmd += "'";
QCString unistring = vmw->codec->fromUnicode(cmd);
do_cmdline_cmd((char_u *)(const char*)unistring);
gui_update_screen();
}//}}}
-void VimWidget::execCmd(QString command)//{{{
+ void
+VimWidget::execCmd(QString command)//{{{
{
QCString unistring = vmw->codec->fromUnicode(command);
do_cmdline_cmd((char_u *)(const char*)unistring);
gui_update_screen();
}//}}}
-QString VimWidget::eval(QString expr)//{{{
+ QString
+VimWidget::eval(QString expr)//{{{
{
#ifdef FEAT_EVAL
QCString unistring = vmw->codec->fromUnicode(expr);
- QString val((const char *)eval_to_string((char_u *)(const char*)unistring,NULL));
+ QString val((const char *)eval_to_string(
+ (char_u *)(const char*)unistring, NULL));
return val;
#else
return QString::null;
#endif
}//}}}
-void VimWidget::wait(long wtime)//{{{
+ void
+VimWidget::wait(long wtime)//{{{
{
- if ( wait_timer.isActive() ) wait_timer.stop();
+ if (wait_timer.isActive())
+ wait_timer.stop();
wait_done = false;
wait_timer.start( wtime, true);
}//}}}
-void VimWidget::wait_timeout() //{{{
+ void
+VimWidget::wait_timeout() //{{{
{
wait_done = true;
}//}}}
-void VimWidget::dragEnterEvent (QDragEnterEvent *e)//{{{
+ void
+VimWidget::dragEnterEvent (QDragEnterEvent *e)//{{{
{
#if (defined(FEAT_WINDOWS) && defined(HAVE_DROP_FILE)) || defined(PROTO)
e->accept(QUriDrag::canDecode(e));
#endif
}//}}}
-void VimWidget::dropEvent (QDropEvent *e) // {{{
+ void
+VimWidget::dropEvent(QDropEvent *e) // {{{
{
#if (defined(FEAT_WINDOWS) && defined(HAVE_DROP_FILE)) || defined(PROTO)
- QStrList urls;
+ QStrList urls;
char_u **fnames;
int redo_dirs = FALSE;
if (QUriDrag::decode(e, urls))
{
n = urls.count();
- fnames = (char_u **)lalloc((n+1) * sizeof(char_u *), TRUE);
+ fnames = (char_u **)lalloc((n+1) * sizeof(char_u *), TRUE);
nfiles = 0;
#if QT_VERSION>=300
QPtrListIterator<char> it(urls);
- for (; it.current(); ++it )
+ for (; it.current(); ++it)
{
KURL u(*it);
#else
- for (i=0;i<urls.count();++i)
+ for (i = 0; i < urls.count(); ++i)
{
KURL u(urls.at(i));
#endif
- if ( !u.isLocalFile() )
+ if (!u.isLocalFile())
url = TRUE;
else
{
{
char_u dirname[MAXPATHL];
char_u *s;
+
if (mch_dirname(dirname, MAXPATHL) == OK)
for (i = 0; i < nfiles; ++i)
if (fnames[i] != NULL)
#endif
} // }}}
-void VimWidget::keyPressEvent( QKeyEvent *e ) // {{{
+ void
+VimWidget::keyPressEvent(QKeyEvent *e) // {{{
{
gui_keypress(e);
} // }}}
-void gui_keypress(QKeyEvent *e) { // {{{
- int key = (int)e->key();
- int modifiers = 0,i;
- uchar string[256],string2[256];
- uchar *s,*d;
+ void
+gui_keypress(QKeyEvent *e) // {{{
+{
+ int key = (int)e->key();
+ int modifiers = 0, i;
+ uchar string[256], string2[256];
+ uchar *s, *d;
Qt::ButtonState state = e->state();
QCString unistring = vmw->codec->fromUnicode(e->text());
- if (unistring.length()>0)
- strncpy((char*)string, (const char*)unistring,unistring.length());
+ if (unistring.length() > 0)
+ strncpy((char*)string, (const char*)unistring, unistring.length());
string[unistring.length()] = 0;
- int len=unistring.length();
+ int len = unistring.length();
// ignore certain keys
- if (key == Qt::Key_Shift || key == Qt::Key_Alt || key == Qt::Key_Control || key == Qt::Key_Meta
- || key == Qt::Key_CapsLock || key == Qt::Key_NumLock || key == Qt::Key_ScrollLock )
+ if (key == Qt::Key_Shift
+ || key == Qt::Key_Alt
+ || key == Qt::Key_Control
+ || key == Qt::Key_Meta
+ || key == Qt::Key_CapsLock
+ || key == Qt::Key_NumLock
+ || key == Qt::Key_ScrollLock)
{
e->ignore();
return;
// change shift-tab (backtab) into S_TAB
- if ( key == Qt::Key_BackTab && state & Qt::ShiftButton)
+ if (key == Qt::Key_BackTab && state & Qt::ShiftButton)
key = Qt::Key_Tab;
// Change C-@ and C-2 in NUL ? Gtk does this
- if ( (key == Qt::Key_2 || key == Qt::Key_At)
- && state & Qt::ControlButton )
+ if ((key == Qt::Key_2 || key == Qt::Key_At) && state & Qt::ControlButton)
{
string[0] = NUL;
len = 1;
/* Check for special keys, making sure BS and DEL are recognised. */
if (len == 0 || key == Qt::Key_BackSpace || key == Qt::Key_Delete)
{
- while (special_keys[i].qtkey != 0 && special_keys[i].qtkey != key ) i++;
+ while (special_keys[i].qtkey != 0 && special_keys[i].qtkey != key)
+ i++;
if (special_keys[i].qtkey != 0)
{
- string[0] = CSI;
- string[1] = special_keys[i].code0;
- string[2] = special_keys[i].code1;
- len = -3;
+ string[0] = CSI;
+ string[1] = special_keys[i].code0;
+ string[2] = special_keys[i].code1;
+ len = -3;
}
/*
for (i = 0; special_keys[i].qtkey != 0 ; i++)
/* Special keys (and a few others) may have modifiers */
- if (len == -3 || key == Qt::Key_Space || key == Qt::Key_Tab ||
- key == Qt::Key_Return || key == Qt::Key_Enter ||
- key == Qt::Key_Escape)
+ if (len == -3
+ || key == Qt::Key_Space
+ || key == Qt::Key_Tab
+ || key == Qt::Key_Return
+ || key == Qt::Key_Enter
+ || key == Qt::Key_Escape)
{
-
modifiers = 0;
- if (state & Qt::ShiftButton) modifiers |= MOD_MASK_SHIFT;
- if (state & Qt::ControlButton) modifiers |= MOD_MASK_CTRL;
- if (state & Qt::AltButton) modifiers |= MOD_MASK_ALT;
+ if (state & Qt::ShiftButton)
+ modifiers |= MOD_MASK_SHIFT;
+ if (state & Qt::ControlButton)
+ modifiers |= MOD_MASK_CTRL;
+ if (state & Qt::AltButton)
+ modifiers |= MOD_MASK_ALT;
/*
* For some keys a shift modifier is translated into another key
key = string[0];
key = simplify_key(key, &modifiers);
- if (key == CSI) key=K_CSI;
+ if (key == CSI)
+ key = K_CSI;
if (IS_SPECIAL(key))
{
len = 1;
}
-
- if (modifiers!=0)
+ if (modifiers != 0)
{
uchar string2[10];
string2[0] = CSI;
} /* special keys */
if (len == 1 && ((string[0] == Ctrl_C && ctrl_c_interrupts)
- || (string[0] == intr_char && intr_char != Ctrl_C)))
+ || (string[0] == intr_char && intr_char != Ctrl_C)))
{
trash_input_buf();
got_int = TRUE;
QByteArray params;
QDataStream stream(params, IO_WriteOnly);
stream << kapp->dcopClient()->appId() << unistring << gui.row << gui.col;
- kapp->dcopClient()->emitDCOPSignal("keyboardEvent(QCString, QCString,int,int)", params);
+ kapp->dcopClient()->emitDCOPSignal(
+ "keyboardEvent(QCString, QCString, int, int)", params);
#endif
e->ignore();
} // }}}
#ifdef FEAT_CLIENTSERVER
-void VimWidget::serverActivate(WId id) //{{{
+ void
+VimWidget::serverActivate(WId id) //{{{
{
if (serverName == NULL && serverDelayedStartName != NULL)
{
#endif
#ifdef FEAT_XIM
-void VimWidget::imStartEvent(QIMEvent *e)
+
+static int preedit_buf_len = 0;
+static int im_preedit_cursor = 0;
+static int im_preedit_trailing = 0;
+
+ static void
+im_delete_preedit(void)
{
+ char_u bskey[] = {CSI, 'k', 'b'};
+ char_u delkey[] = {CSI, 'k', 'D'};
+
+ if (State & NORMAL)
+ {
+ im_preedit_cursor = 0;
+ return;
+ }
+ for (; im_preedit_cursor > 0; --im_preedit_cursor)
+ add_to_input_buf(bskey, (int)sizeof(bskey));
+
+ for (; im_preedit_trailing > 0; --im_preedit_trailing)
+ add_to_input_buf(delkey, (int)sizeof(delkey));
+}
+
+ void
+im_set_position(int row, int col)
+{
+ vmw->w->setMicroFocusHint(
+ TEXT_X(gui.col),
+ TEXT_Y(gui.row), 0, 0, TRUE, &vmw->w->font());
+}
+
+ int
+im_is_preediting()
+{
+ return (preedit_start_col != MAXCOL);
+}
+
+ int
+im_get_feedback_attr(int col)
+{
+ if (draw_feedback != NULL && col < preedit_buf_len)
+ {
+ if (draw_feedback[col] & XIMReverse)
+ return HL_INVERSE;
+ else if (draw_feedback[col] & XIMUnderline)
+ return HL_UNDERLINE;
+ else
+ return hl_attr(HLF_V);
+ }
+
+ return -1;
+}
+
+ void
+VimWidget::imStartEvent(QIMEvent *e)
+{
+ if (State & CMDLINE)
+ preedit_start_col = cmdline_getvcol_cursor();
+ else if (curwin != NULL)
+ getvcol(curwin, &curwin->w_cursor, &preedit_start_col, NULL, NULL);
+ xic = (XIC)!NULL;
e->accept();
}
-void VimWidget::imEndEvent(QIMEvent *e)
+ void
+VimWidget::imEndEvent(QIMEvent *e)
{
uchar string[256];
+ im_delete_preedit();
+
QCString unistring = vmw->codec->fromUnicode(e->text());
- if (unistring.length()>0)
- strncpy((char*)string, (const char*)unistring,unistring.length());
+ if (unistring.length() > 0)
+ strncpy((char*)string, (const char*)unistring, unistring.length());
string[unistring.length()] = 0;
- int len=unistring.length();
-
- add_to_input_buf(string, len);
+ int len = unistring.length();
+
+ add_to_input_buf_csi(string, len);
+ im_preedit_cursor = 0;
+ im_preedit_trailing = 0;
+ preedit_start_col = MAXCOL;
+ preedit_buf_len = 0;
+ if (draw_feedback)
+ {
+ free(draw_feedback);
+ draw_feedback = NULL;
+ }
+ xic = 0;
e->accept();
}
-void VimWidget::imComposeEvent(QIMEvent *e)
+ void
+VimWidget::imComposeEvent(QIMEvent *e)
{
- //i should do something here, displaying the text somewhere ... (status area ?)
+ uchar string[256];
+ char_u backkey[] = {CSI, 'k', 'l'};
+
+ im_delete_preedit();
+
+ if (State & NORMAL)
+ {
+ im_preedit_cursor = 0;
+ return;
+ }
+
+ QCString unistring = vmw->codec->fromUnicode(e->text());
+ if (unistring.length() > 0)
+ strncpy((char*)string, (const char*)unistring,unistring.length());
+ string[unistring.length()] = 0;
+ int len = unistring.length();
+ add_to_input_buf_csi(string, len);
+
+ preedit_buf_len = e->text().length();
+ if (draw_feedback == NULL)
+ draw_feedback = (char *)alloc(preedit_buf_len);
+ else
+ draw_feedback = (char *)realloc(draw_feedback, preedit_buf_len);
+ preedit_end_col = preedit_start_col;
+
+ char_u *p = string;
+ for (int n = 0; n < preedit_buf_len; n++)
+ {
+ if (n < e->cursorPos() || n >= e->cursorPos() + e->selectionLength())
+ draw_feedback[n] = XIMUnderline;
+ else
+ draw_feedback[n] = XIMReverse;
+ preedit_end_col += (*mb_ptr2cells)(p);
+ p += (*mb_ptr2len_check)(p);
+ }
+ im_preedit_cursor = e->cursorPos();
+ im_preedit_trailing = preedit_buf_len - im_preedit_cursor;
+
+# ifdef FEAT_RIGHTLEFT
+ if ((State & CMDLINE) == 0 && curwin != NULL && curwin->w_p_rl)
+ backkey[2] = 'r';
+# endif
+ for (int n = 0; n < im_preedit_trailing; n++)
+ add_to_input_buf(backkey, (int)sizeof(backkey));
+
e->accept();
}
#endif
-void VimMainWindow::lock()
+ void
+VimMainWindow::lock()
{
- locked=true;
+ locked = true;
}
-void VimMainWindow::unlock()
+ void
+VimMainWindow::unlock()
{
- locked=false;
+ locked = false;
}
-bool VimMainWindow::isLocked()
+ bool
+VimMainWindow::isLocked()
{
return locked;
}
// ->resize VimWidget if not locked
//
-void VimMainWindow::resizeEvent ( QResizeEvent *e ) //{{{
+ void
+VimMainWindow::resizeEvent(QResizeEvent *e) //{{{
{
- if ( vmw->isLocked() ) return;
+ if (vmw->isLocked())
+ return;
//remove toolbar and menubar height
int height = e->size().height();
int width = e->size().width();
)
height -= vmw->menuBar()->height();
#ifdef FEAT_TOOLBAR
- if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled() &&
- (vmw->toolBar()->barPos()==KToolBar::Top ||
- vmw->toolBar()->barPos()==KToolBar::Bottom))
+ if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled()
+ && (vmw->toolBar()->barPos() == KToolBar::Top
+ || vmw->toolBar()->barPos() == KToolBar::Bottom))
height -= vmw->toolBar()->height();
- if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled() &&
- (vmw->toolBar()->barPos()==KToolBar::Left ||
- vmw->toolBar()->barPos()==KToolBar::Right))
+ if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled()
+ && (vmw->toolBar()->barPos() == KToolBar::Left
+ || vmw->toolBar()->barPos() == KToolBar::Right))
width -= vmw->toolBar()->width();
#endif
- height = ( ((int)(height/gui.char_height))*gui.char_height );
- if (!vmw->isLocked()) gui_resize_shell(width,height);
+ height = ((int)(height/gui.char_height))*gui.char_height;
+ if (!vmw->isLocked())
+ gui_resize_shell(width, height);
}//}}}
-void VimWidget::focusInEvent( QFocusEvent * fe ) // {{{
+ void
+VimWidget::focusInEvent(QFocusEvent *fe) // {{{
{
gui_focus_change(true);
gui_mch_start_blink();
} // }}}
-void VimWidget::focusOutEvent( QFocusEvent * fe )//{{{
+ void
+VimWidget::focusOutEvent(QFocusEvent *fe)//{{{
{
gui_focus_change(false);
gui_mch_stop_blink();
}//}}}
-void VimWidget::set_blink_time( long wait, long on, long off)//{{{
+ void
+VimWidget::set_blink_time(long wait, long on, long off)//{{{
{
blink_wait_time = wait;
blink_on_time = on;
blink_off_time = off;
}//}}}
-void VimWidget::start_cursor_blinking()//{{{
+ void
+VimWidget::start_cursor_blinking()//{{{
{
- if (blink_timer.isActive()) blink_timer.stop();
+ if (blink_timer.isActive())
+ blink_timer.stop();
/* Only switch blinking on if none of the times is zero */
if (blink_wait_time && blink_on_time && blink_off_time && gui.in_focus)
}
}//}}}
-void VimWidget::blink_cursor()//{{{
+ void
+VimWidget::blink_cursor()//{{{
{
if (blink_state == BLINK_ON)
{
}
}//}}}
-void VimWidget::stop_cursor_blinking()//{{{
+ void
+VimWidget::stop_cursor_blinking()//{{{
{
- if (blink_timer.isActive()) blink_timer.stop();
+ if (blink_timer.isActive())
+ blink_timer.stop();
if (blink_state == BLINK_OFF)
gui_update_cursor(TRUE, FALSE);
}//}}}
#ifdef FEAT_MZSCHEME
-void VimWidget::timerEvent( QTimerEvent * evnt)//{{{
+ void
+VimWidget::timerEvent(QTimerEvent * evnt)//{{{
{
if (evnt->timerId() == mzscheme_timer_id)
timer_proc();
}//}}}
-void VimWidget::enable_mzscheme_threads()//{{{
+ void
+VimWidget::enable_mzscheme_threads()//{{{
{
mzscheme_timer_id = startTimer(p_mzq);
}//}}}
-void VimWidget::disable_mzscheme_threads()//{{{
+ void
+VimWidget::disable_mzscheme_threads()//{{{
{
killTimer(mzscheme_timer_id);
}//}}}
#endif
-void VimWidget::flash()//{{{
+ void
+VimWidget::flash()//{{{
{
QPainter p(this);
p.setRasterOp(Qt::XorROP);
- p.fillRect(geometry(),QColor(0xFF,0xFF,0xFF));
+ p.fillRect(geometry(), QColor(0xFF, 0xFF, 0xFF));
p.flush();
//FIXME: Make this a little smarter. Maybe add a timer or something
usleep(19000);
- p.fillRect(geometry(),QColor(0xFF,0xFF,0xFF));
+ p.fillRect(geometry(), QColor(0xFF, 0xFF, 0xFF));
p.flush();
p.end();
}//}}}
/*
* The main Window
*/
- VimMainWindow::VimMainWindow ( const char *name , WFlags f)//{{{
-:KMainWindow(0L, name,f)
+VimMainWindow::VimMainWindow(const char *name , WFlags f)//{{{
+ :KMainWindow(0L, name, f)
{
#ifdef FEAT_CLIENTSERVER
- oldFilter = qt_set_x11_event_filter( kvim_x11_event_filter );
+ oldFilter = qt_set_x11_event_filter(kvim_x11_event_filter);
#endif
- if (echo_wid_arg== 1)
+ if (echo_wid_arg == 1)
{
fprintf(stderr, "WID: %ld\n", (long)winId());
fflush(stderr);
gui.w = w;
setFocusProxy(w);
w->setFocus();
- have_tearoff=0;
+ have_tearoff = 0;
- finddlg=new KEdFind (this,0,false);
- repldlg=new KEdReplace (this,0,false);
- QObject::connect( finddlg, SIGNAL(search()), this, SLOT(slotSearch()) );
- QObject::connect( repldlg, SIGNAL(find()), this, SLOT(slotFind()) );
- QObject::connect( repldlg, SIGNAL(replace()), this, SLOT(slotReplace()) );
- QObject::connect( repldlg, SIGNAL(replaceAll()), this, SLOT(slotReplaceAll()) );
+ finddlg = new KEdFind(this, 0, false);
+ repldlg = new KEdReplace(this, 0, false);
+ QObject::connect(finddlg, SIGNAL(search()), this, SLOT(slotSearch()));
+ QObject::connect(repldlg, SIGNAL(find()), this, SLOT(slotFind()));
+ QObject::connect(repldlg, SIGNAL(replace()), this, SLOT(slotReplace()));
+ QObject::connect(repldlg, SIGNAL(replaceAll()), this,
+ SLOT(slotReplaceAll()));
#ifdef FEAT_TOOLBAR
connect(toolBar(), SIGNAL(clicked(int)), this, SLOT(menu_activated(int)));
#ifdef FEAT_CLIENTSERVER
w->serverActivate(winId());
- if (serverName!=NULL)
- kapp->dcopClient()->registerAs(QCString((const char*)serverName),false);
- else if (serverDelayedStartName!=NULL)
- kapp->dcopClient()->registerAs(QCString((const char*)serverDelayedStartName),false);
- else if (argServerName!=NULL)
- kapp->dcopClient()->registerAs(argServerName->utf8(),false);
+ if (serverName != NULL)
+ kapp->dcopClient()->registerAs(QCString((const char*)serverName),
+ false);
+ else if (serverDelayedStartName != NULL)
+ kapp->dcopClient()->registerAs(
+ QCString((const char*)serverDelayedStartName), false);
+ else if (argServerName != NULL)
+ kapp->dcopClient()->registerAs(argServerName->utf8(), false);
#else
- if (argServerName!=NULL)
- kapp->dcopClient()->registerAs(argServerName->utf8(),false);
+ if (argServerName != NULL)
+ kapp->dcopClient()->registerAs(argServerName->utf8(), false);
#endif
QXEmbed::initialize();
}//{{{
-bool VimMainWindow::queryClose()//{{{
+ bool
+VimMainWindow::queryClose()//{{{
{
gui_shell_closed();
return true;
}//}}}
-bool VimMainWindow::queryExit()//{{{
+ bool
+VimMainWindow::queryExit()//{{{
{
return true;
}//}}}
-void VimMainWindow::menu_activated(int dx)//{{{
+ void
+VimMainWindow::menu_activated(int dx)//{{{
{
#ifdef FEAT_MENU
- if (!dx) { // tearoff
+ if (!dx) // tearoff
return;
- }
gui_mch_set_foreground();
- gui_menu_cb((VimMenu *) dx);
+ gui_menu_cb((VimMenu *)dx);
#endif
}//}}}
-void VimMainWindow::clipboard_selection_update(){//{{{
+ void
+VimMainWindow::clipboard_selection_update()//{{{
+{
if (kapp->clipboard()->ownsSelection())
clip_own_selection(&clip_star);
else
clip_lose_selection(&clip_star);
}//}}}
-void VimMainWindow::clipboard_data_update(){//{{{
+ void
+VimMainWindow::clipboard_data_update()//{{{
+{
#if QT_VERSION>=300
if (kapp->clipboard()->ownsClipboard())
clip_own_selection(&clip_plus);
#endif
}//}}}
-void VimMainWindow::slotSearch()//{{{
+ void
+VimMainWindow::slotSearch()//{{{
{
QString find_text;
bool direction_down = TRUE;
casesensitive = finddlg->case_sensitive();
// if (casesensitive) find_text = "\\C" + find_text;
// else find_text = "\\c" + find_text;
- if (casesensitive) flags|=FRD_MATCH_CASE;
+ if (casesensitive)
+ flags |= FRD_MATCH_CASE;
QCString unistring = vmw->codec->fromUnicode(find_text);
- gui_do_findrepl(flags, (char_u *)(const char *)unistring, NULL,(int)direction_down);
+ gui_do_findrepl(flags, (char_u *)(const char *)unistring, NULL,
+ (int)direction_down);
}//}}}
-void VimMainWindow::slotFind()//{{{
+ void
+VimMainWindow::slotFind()//{{{
{
QString find_text;
- bool direction_down=TRUE;
+ bool direction_down = TRUE;
bool casesensitive = TRUE;
int flags = FRD_R_FINDNEXT;
- find_text=repldlg->getText();
+ find_text = repldlg->getText();
direction_down = !(repldlg->get_direction());
casesensitive = repldlg->case_sensitive();
// if (casesensitive) find_text = "\\C" + find_text;
// else find_text = "\\c" + find_text;
- if (casesensitive) flags|=FRD_MATCH_CASE;
+ if (casesensitive) flags |= FRD_MATCH_CASE;
QCString unistring = vmw->codec->fromUnicode(find_text);
- gui_do_findrepl(flags, (char_u *)(const char *)unistring, NULL,(int)direction_down);
+ gui_do_findrepl(flags, (char_u *)(const char *)unistring, NULL,
+ (int)direction_down);
}//}}}
-void VimMainWindow::slotReplace()//{{{
+ void
+VimMainWindow::slotReplace()//{{{
{
QString find_text;
QString repl_text;
- bool direction_down=TRUE;
+ bool direction_down = TRUE;
bool casesensitive = TRUE;
int flags = FRD_REPLACE;
- find_text=repldlg->getText();
- repl_text=repldlg->getReplaceText();
+ find_text = repldlg->getText();
+ repl_text = repldlg->getReplaceText();
direction_down = !(repldlg->get_direction());
//if (casesensitive) find_text = "\\C" + find_text;
//else find_text = "\\c" + find_text;
- if (casesensitive) flags|=FRD_MATCH_CASE;
+ if (casesensitive) flags |= FRD_MATCH_CASE;
QCString unistring = vmw->codec->fromUnicode(find_text);
QCString unistring2 = vmw->codec->fromUnicode(repl_text);
- gui_do_findrepl(flags, (char_u *)(const char *)unistring,(char_u *)(const char*)unistring2,(int)direction_down);
+ gui_do_findrepl(flags, (char_u *)(const char *)unistring,
+ (char_u *)(const char*)unistring2, (int)direction_down);
}//}}}
-void VimMainWindow::slotReplaceAll()//{{{
+ void
+VimMainWindow::slotReplaceAll()//{{{
{
QString find_text;
QString repl_text;
- bool direction_down=TRUE;
+ bool direction_down = TRUE;
bool casesensitive = TRUE;
int flags = FRD_REPLACEALL;
- find_text=repldlg->getText();
- repl_text=repldlg->getReplaceText();
+ find_text = repldlg->getText();
+ repl_text = repldlg->getReplaceText();
direction_down = !(repldlg->get_direction());
casesensitive = repldlg->case_sensitive();
// if (casesensitive) find_text = "\\C" + find_text;
// else find_text = "\\c" + find_text;
- if (casesensitive) flags|=FRD_MATCH_CASE;
+ if (casesensitive)
+ flags |= FRD_MATCH_CASE;
QCString unistring = vmw->codec->fromUnicode(find_text);
QCString unistring2 = vmw->codec->fromUnicode(repl_text);
- gui_do_findrepl(flags, (char_u *)(const char *)unistring,(char_u *)(const char*)unistring2,(int)direction_down);
+ gui_do_findrepl(flags, (char_u *)(const char *)unistring,
+ (char_u *)(const char*)unistring2, (int)direction_down);
}//}}}
-void VimMainWindow::showAboutKDE()
+ void
+VimMainWindow::showAboutKDE()
{
KAboutKDE *kde = new KAboutKDE(this);
kde->show();
}
-void VimMainWindow::showAboutApplication()//{{{
+ void
+VimMainWindow::showAboutApplication()//{{{
{
- KAboutData *aboutData = new KAboutData (
+ KAboutData *aboutData = new KAboutData(
"kvim"
, I18N_NOOP("KVim")
, VIM_VERSION_SHORT
about->show();
}//}}}
-void VimMainWindow::showTipOfTheDay()
+ void
+VimMainWindow::showTipOfTheDay()
{
#if QT_VERSION>=300
- KTipDialog::showTip (vmw,QString::null,true);
+ KTipDialog::showTip(vmw, QString::null, true);
#endif
}
-void VimMainWindow::buffersToolbar()
+ void
+VimMainWindow::buffersToolbar()
{
}
-void VimMainWindow::showBugReport()
+ void
+VimMainWindow::showBugReport()
{
- KBugReport *bug= new KBugReport(this,true);
+ KBugReport *bug= new KBugReport(this, true);
bug->show();
}
+
/*
* Vim Dialog
*
* 1- : nb of the pressed button
*/
-VimDialog::VimDialog (int type, /* type of dialog *///{{{
+VimDialog::VimDialog(int type, /* type of dialog *///{{{
char_u * title, /* title of dialog */
char_u * message, /* message text */
char_u * buttons, /* names of buttons */
int def_but, /* default button */
- char_u *textfield ) /* input field */
-:QDialog(vmw, "vim generic dialog", true), // true is for "modal"
+ char_u *textfield) /* input field */
+ :QDialog(vmw, "vim generic dialog", true), // true is for "modal"
mapper(this, "dialog signal mapper")
{
/*
default:
icon_data = generic_xpm;
};
- QLabel * icon = new QLabel( this );
- icon->setPixmap( QPixmap( (const char **) icon_data ) );
- icon->setFixedSize( icon->sizeHint() );
+ QLabel * icon = new QLabel(this);
+ icon->setPixmap(QPixmap((const char **) icon_data));
+ icon->setFixedSize(icon->sizeHint());
- QLabel * text = new QLabel( (const char *)message, this );
- text->setAlignment( AlignHCenter | AlignVCenter | ExpandTabs );
+ QLabel * text = new QLabel(QSTR(message), this);
+ text->setAlignment(AlignHCenter | AlignVCenter | ExpandTabs);
- QStringList buttonText = QStringList::split( DLG_BUTTON_SEP, (char *) buttons);
+ QStringList buttonText = QStringList::split(DLG_BUTTON_SEP, QSTR(buttons));
int butNb = buttonText.count();
/*
* Layout
*/
- QVBoxLayout * vly = new QVBoxLayout( this, 5, 5 );
- QHBoxLayout * hly1 = new QHBoxLayout( vly, 5);
- hly1->addWidget( icon );
- hly1->addWidget( text );
- QHBoxLayout * hly3 = new QHBoxLayout ( vly , 5);
- if (textfield!=NULL)
+ QVBoxLayout * vly = new QVBoxLayout(this, 5, 5);
+ QHBoxLayout * hly1 = new QHBoxLayout(vly, 5);
+ hly1->addWidget(icon);
+ hly1->addWidget(text);
+ QHBoxLayout * hly3 = new QHBoxLayout(vly , 5);
+ if (textfield != NULL)
{
- entry = new QLineEdit((const char *)textfield,this);
- entry->setText((const char *)textfield);
- hly3->addWidget( entry );
- ret=textfield;
+ entry = new QLineEdit(QSTR(textfield), this);
+ entry->setText(QSTR(textfield));
+ hly3->addWidget(entry);
+ ret = textfield;
}
else
- entry=NULL;
+ entry = NULL;
- QHBoxLayout * hly2 = new QHBoxLayout( vly, 15);
+ QHBoxLayout * hly2 = new QHBoxLayout(vly, 15);
QString s;
QPushButton * pushButton = 0L;
- for (int i=0; i<butNb; i++)
+ for (int i = 0; i<butNb; i++)
{
s = buttonText[i];
- pushButton = new QPushButton(s, this );
+ pushButton = new QPushButton(s, this);
if (s.find('&') != -1)
- pushButton->setAccel(s.at(s.find('&')+1).latin1());
+ pushButton->setAccel(s.at(s.find('&') + 1).latin1());
- hly2->addWidget( pushButton );
- if (i == def_but-1)
+ hly2->addWidget(pushButton);
+ if (i == def_but - 1)
{
- pushButton->setDefault( true );
- pushButton->setAutoDefault( true );
- setResult( i+1 );
+ pushButton->setDefault(true);
+ pushButton->setAutoDefault(true);
+ setResult(i + 1);
}
connect(pushButton, SIGNAL(clicked()), &mapper, SLOT(map()));
- mapper.setMapping(pushButton, i+1);
+ mapper.setMapping(pushButton, i + 1);
}
- connect( &mapper, SIGNAL(mapped(int)), this, SLOT(done(int)));
+ connect(&mapper, SIGNAL(mapped(int)), this, SLOT(done(int)));
- setCaption((const char *) title);
+ setCaption(QSTR(title));
vly->activate();
}//}}}
-void VimDialog::done(int r)
+ void
+VimDialog::done(int r)
{
- if (entry!=NULL)
+ if (entry != NULL)
{
- if (r)
+ if (r)
{
- QCString unistring=vmw->codec->fromUnicode(entry->text());
- STRCPY(ret,(const char*)unistring);
+ QCString unistring = vmw->codec->fromUnicode(entry->text());
+ STRCPY(ret, (const char*)unistring);
}
else
- *ret=NUL;
+ *ret = NUL;
}
QDialog::done(r);
}
}//}}}
-void SBPool::create(GuiScrollbar * sb, int orient)//{{{
+ void
+SBPool::create(GuiScrollbar * sb, int orient)//{{{
{
switch(orient)
{
}//}}}
-void SBPool::sbUsed(int who)//{{{
+ void
+SBPool::sbUsed(int who)//{{{
{
GuiScrollbar *sb = (GuiScrollbar*)who;
- gui_drag_scrollbar( sb, sb->w->value(), FALSE);
+ gui_drag_scrollbar(sb, sb->w->value(), FALSE);
}//}}}
-void SBPool::destroy(GuiScrollbar * sb)//{{{
+ void
+SBPool::destroy(GuiScrollbar *sb)//{{{
{
- if (!sb->w) return;
+ if (!sb->w)
+ return;
delete sb->w;
sb->w = 0;
}//}}}
#ifdef FEAT_CLIENTSERVER
-static int kvim_x11_event_filter( XEvent* e)//{{{
+ static int
+kvim_x11_event_filter(XEvent* e)//{{{
{
if (e->xproperty.type == PropertyNotify
&& e->xproperty.atom == commProperty
&& e->xproperty.state == PropertyNewValue)
serverEventProc(qt_xdisplay(), e);
- if (oldFilter) return oldFilter( e );
+ if (oldFilter)
+ return oldFilter( e );
return FALSE;
}//}}}
#endif
//add some QT 3 fonts usefull functions
#if QT_VERSION<300
-QString KVimUtils::toString(QFont *f)
+ QString
+KVimUtils::toString(QFont *f)
{
QStringList l;
l.append(f->family());
return l.join(",");
}
-bool KVimUtils::fromString(QFont *f, QString descrip)
+ bool
+KVimUtils::fromString(QFont *f, QString descrip)
{
QStringList l(QStringList::split(',', descrip));
int count = l.count();
if (count != 10 && count != 9)
- return FALSE;
+ return FALSE;
f->setFamily(l[0]);
f->setPointSize(l[1].toInt());
- if ( count == 9 )
+ if (count == 9)
{
f->setStyleHint((QFont::StyleHint) l[2].toInt());
f->setWeight(l[3].toInt());
}
#endif
-QString KVimUtils::convertEncodingName(QString name)
+ QString
+KVimUtils::convertEncodingName(QString name)
{
- if (name.startsWith("ucs") || name.startsWith("utf-16")) return QString("utf16");
- if (name=="cp950") return QString("Big5");
+ if (name.startsWith("ucs") || name.startsWith("utf-16"))
+ return QString("utf16");
+ if (name == "cp950")
+ return QString("Big5");
return QString();
}
class QSignalMapper;
class QPaintEvent;
-enum BlinkState {
+enum BlinkState
+{
BLINK_NONE,
BLINK_ON,
BLINK_OFF
Q_OBJECT
public:
- VimWidget( QWidget *parent=0, const char *name=0, WFlags f=0 );
- virtual void paintEvent( QPaintEvent *);
+ VimWidget(QWidget *parent = 0, const char *name = 0, WFlags f = 0);
+ virtual void paintEvent(QPaintEvent *);
void draw_string(int x, int y, QString s, int len, int flags);
/** Init the blinking time */
- void set_blink_time( long, long, long );
+ void set_blink_time(long, long, long);
void start_cursor_blinking();
void stop_cursor_blinking();
void wait(long);
BlinkState blink_state;
QPainter *painter;
QPopupMenu *menu;
+ virtual void setMicroFocusHint(int x, int y, int w, int h, bool text=TRUE, QFont *f = 0)
+ {
+ QWidget::setMicroFocusHint(x, y, w, h, text, f);
+ }
protected:
- virtual void keyPressEvent( QKeyEvent * );
- virtual void mousePressEvent( QMouseEvent *);
- virtual void mouseDoubleClickEvent( QMouseEvent *);
- virtual void mouseReleaseEvent( QMouseEvent *);
- virtual void mouseMoveEvent( QMouseEvent *);
- virtual void focusInEvent( QFocusEvent * );
- virtual void focusOutEvent( QFocusEvent * );
- virtual void dragEnterEvent (QDragEnterEvent *);
- virtual void dropEvent (QDropEvent *);
+ virtual void keyPressEvent(QKeyEvent *);
+ virtual void mousePressEvent(QMouseEvent *);
+ virtual void mouseDoubleClickEvent(QMouseEvent *);
+ virtual void mouseReleaseEvent(QMouseEvent *);
+ virtual void mouseMoveEvent(QMouseEvent *);
+ virtual void focusInEvent(QFocusEvent *);
+ virtual void focusOutEvent(QFocusEvent *);
+ virtual void dragEnterEvent(QDragEnterEvent *);
+ virtual void dropEvent(QDropEvent *);
#ifdef FEAT_XIM
- virtual void imStartEvent ( QIMEvent * );
- virtual void imEndEvent ( QIMEvent * );
- virtual void imComposeEvent ( QIMEvent * );
+ virtual void imStartEvent(QIMEvent *);
+ virtual void imEndEvent(QIMEvent *);
+ virtual void imComposeEvent(QIMEvent *);
#endif
#ifdef FEAT_MZSCHEME
- virtual void timerEvent( QTimerEvent * );
+ virtual void timerEvent(QTimerEvent *);
#endif
/* cursor blinking stuff */
Q_OBJECT
public:
- VimMainWindow ( const char *name = 0L, WFlags f = WDestructiveClose );
+ VimMainWindow(const char *name = 0L, WFlags f = WDestructiveClose);
/** called when the widget closes */
// bool close(bool alsoDelete);
VimWidget *w;
- KEdFind *finddlg;
- KEdReplace *repldlg;
+ KEdFind *finddlg;
+ KEdReplace *repldlg;
int have_tearoff;
QTextCodec *codec;
public slots:
void menu_activated(int dx);
- void clipboard_selection_update();
- void clipboard_data_update();
- void slotSearch();
- void slotFind();
- void slotReplace();
- void slotReplaceAll();
+ void clipboard_selection_update();
+ void clipboard_data_update();
+ void slotSearch();
+ void slotFind();
+ void slotReplace();
+ void slotReplaceAll();
void showAboutApplication();
void showAboutKDE();
void showBugReport();
void unlock();
protected:
- virtual void wheelEvent (QWheelEvent *);
- virtual void resizeEvent ( QResizeEvent *e );
+ virtual void wheelEvent(QWheelEvent *);
+ virtual void resizeEvent(QResizeEvent *e);
#if defined(FEAT_SESSION)
- void saveGlobalProperties (KConfig *conf);
- void readGlobalProperties (KConfig *conf);
+ void saveGlobalProperties(KConfig *conf);
+ void readGlobalProperties(KConfig *conf);
#endif
bool queryClose();
bool queryExit();
{
Q_OBJECT
public:
- VimDialog (int type, /* type of dialog */
- unsigned char * title, /* title of dialog */
- unsigned char * message, /* message text */
- unsigned char * buttons, /* names of buttons */
+ VimDialog(int type, /* type of dialog */
+ unsigned char *title, /* title of dialog */
+ unsigned char *message, /* message text */
+ unsigned char *buttons, /* names of buttons */
int def_but, /* default button */
char_u *textfield); /* input text */
private:
QSignalMapper mapper;
};
-class KVimUtils {
+class KVimUtils
+{
public:
static QString convertEncodingName(QString);
#if QT_VERSION<300
extern VimMainWindow *vmw;
extern SBPool *sbpool;
-extern QString *argServerName;
+extern QString *argServerName;
+
+#define QSTR(x) \
+ (has_mbyte ? \
+ (enc_utf8 ? \
+ QString::fromUtf8((const char *)x) : \
+ QString::fromLocal8Bit((const char *)x)) : \
+ QString((const char *)x))
#endif // GUI_KDE_WIDGET
/*
* global variable for KDE, we can't put them in Gui, cause there are C++ types
*/
-VimMainWindow *vmw=0;
-SBPool *sbpool=0;
-QString *argServerName=0;
+VimMainWindow *vmw = 0;
+SBPool *sbpool = 0;
+QString *argServerName = 0;
#ifdef FEAT_MOUSESHAPE
/* The last set mouse pointer shape is remembered, to be used when it goes
*/
#if QT_VERSION>=300
-static int tip=0; // 1 no dialog, 0 use it if enabled in conf, 2 force the tip
+static int tip = 0; // 1 no dialog, 0 use it if enabled in conf,
+ // 2 force the tip
#endif
-static int reverse=0; // 0 bg : white, 1 : bg : black
-QString *startfont;
-QSize *startsize;
-static int gui_argc = 0;
-static char **gui_argv = NULL;
+static int reverse = 0; // 0 bg : white, 1 : bg : black
+QString *startfont;
+QSize *startsize;
+static int gui_argc = 0;
+static char **gui_argv = NULL;
/*
* Parse the GUI related command-line arguments. Any arguments used are
* deleted from argv, and *argc is decremented accordingly. This is called
* when vim is started, whether or not the GUI has been started.
*/
- void
+ void
gui_mch_prepare(int *argc, char **argv)// {{{
{
- //copy args for KDE/Qt
- gui_argc = 0;
- //this one is not really good as all options are not for KDE/Qt ...
- gui_argv = (char **)lalloc((long_u)(*argc * sizeof(char *)), FALSE);
- if (gui_argv == NULL)
- return;
- gui_argv[gui_argc++] = argv[0];
-
- int found = 0;
- for (int i = 1; i < *argc ; i++)
+ // copy args for KDE/Qt
+ gui_argc = 0;
+
+ // this one is not really good as all options are not for KDE/Qt ...
+ gui_argv = (char **)lalloc((long_u)(*argc * sizeof(char *)), FALSE);
+ if (gui_argv == NULL)
+ return;
+ gui_argv[gui_argc++] = argv[0];
+
+ int found = 0;
+ for (int i = 1; i < *argc ; i++)
+ {
+ if (found != 2)
+ found = 0;
+ else
+ {
+ found = 0;
+ // remove from the list of argv
+ if (--*argc > i)
+ {
+ mch_memmove(&argv[i], &argv[i + 1],
+ (*argc - i) * sizeof(char *));
+ }
+ i--;
+ continue;
+ }
+
+ if (strcmp(argv[i], "--servername") == 0)
{
- if (found!=2)
- found = 0;
- else {
- found=0;
- //remove from the list of argv
- if (--*argc>i) {
- mch_memmove(&argv[i], &argv[i + 1],
- (*argc - i) * sizeof(char *));
- }
- i--;
- continue;
- }
-
- if (strcmp(argv[i],"--servername")==0) {
- argServerName = new QString(argv[i+1]); // to get the serverName now
- }
+ argServerName = new QString(argv[i+1]); // to get the serverName now
+ }
#if QT_VERSION>+300
- if (strcmp(argv[i],"-tip")==0 ) {
- tip=2;
- found=1;
- }
- if (strcmp(argv[i],"-notip")==0 ) {
- tip=1;
- found=1;
- }
+ if (strcmp(argv[i], "-tip") == 0 )
+ {
+ tip = 2;
+ found = 1;
+ }
+ if (strcmp(argv[i], "-notip") == 0 )
+ {
+ tip = 1;
+ found = 1;
+ }
#endif
- if (strcmp(argv[i],"-black")==0 ) {
- reverse=1;
- found=1;
- }
- /* replaced by -black */
-/* if (strcmp(argv[i],"-rv")==0 ) {
- reverse=1;
- found=1;
- }*/
- if (strcmp(argv[i],"-font")==0 || strcmp(argv[i], "-fn")==0 ) {
- startfont=new QString(argv[i+1]);
- found=2;
- }
- if (strcmp(argv[i],"-geometry")==0 || strcmp (argv[i],"-geom")==0 ) {
- found=2;
- QString text(argv[i+1]);
- QStringList list = QStringList::split(QChar('x'), text);
- startsize = new QSize(list[0].toInt(),list[1].toInt());
- }
- if (strcmp (argv[i],"-display")==0 ) { //XXX: this does not work,
- // too many -display options in main.c !
- // ask Bram ...
- gui_argv[gui_argc++] = strdup("--display");
- gui_argv[gui_argc++] = argv[i+1];
- found=0;
- }
- if (strcmp (argv[i],"--display")==0 ) {
- gui_argv[gui_argc++] = argv[i];
- gui_argv[gui_argc++] = argv[i+1];
- found=2;
- }
- //KDE/Qt options with no args
- if (strcmp(argv[i],"--help-kde")==0 || strcmp (argv[i],"--help-qt")==0
- || strcmp(argv[i], "--help-all")==0
- || strcmp(argv[i], "--reverse")==0
- || strcmp(argv[i], "--author")==0
-// || strcmp(argv[i], "--version")==0 //disabled we need these for kcmvim
-// || strcmp(argv[i], "-v")==0
- || strcmp(argv[i], "--license")==0
- || strcmp(argv[i], "--cmap")==0
- || strcmp(argv[i], "--nograb")==0
- || strcmp(argv[i], "--dograb")==0
- || strcmp(argv[i], "--sync")==0
- || strcmp(argv[i], "--noxim")==0
- || strcmp(argv[i], "--nocrashhandler")==0
- || strcmp(argv[i], "--waitforwm")==0
- ) {
- gui_argv[gui_argc++] = argv[i];
- found=1;
- }
- //this outputs KDE and Vim versions :)
- if (strcmp(argv[i],"--version")==0
- || strcmp (argv[i],"-v")==0
- ) {
- gui_argv[gui_argc++] = argv[i];
- }
-
-
- //KDE/Qt options with one arg
- if ( strcmp(argv[i],"--session")==0
- || strcmp(argv[i],"--ncols")==0
- || strcmp(argv[i],"--bg")==0
- || strcmp(argv[i],"--background")==0
- || strcmp(argv[i],"--fg")==0
- || strcmp(argv[i],"--foreground")==0
- || strcmp(argv[i],"--btn")==0
- || strcmp(argv[i],"--name")==0
- || strcmp(argv[i],"--title")==0
- || strcmp(argv[i],"--inputstyle")==0
- || strcmp(argv[i],"--im")==0
- || strcmp(argv[i],"--caption")==0
- || strcmp(argv[i],"--icon")==0
- || strcmp(argv[i],"--miniicon")==0
- || strcmp(argv[i],"--config")==0
- || strcmp(argv[i],"--dcopserver")==0
- || strcmp(argv[i],"--style")==0
- || strcmp(argv[i],"--geometry")==0
- || strcmp(argv[i],"--smkey")==0
- || strcmp(argv[i],"-smkey")==0
- || strcmp(argv[i],"-session")==0
- ) {
- gui_argv[gui_argc++] = argv[i];
- gui_argv[gui_argc++] = argv[i+1];
- found=2;
- }
-
- //remove from the list of argv
- if (found >= 1 && --*argc>i) {
- mch_memmove(&argv[i], &argv[i + 1],
- (*argc - i) * sizeof(char *));
- i--;
- }
+ if (strcmp(argv[i], "-black") == 0 )
+ {
+ reverse = 1;
+ found = 1;
+ }
+ /* replaced by -black */
+ /* if (strcmp(argv[i], "-rv") == 0 )
+ * {
+ reverse = 1;
+ found = 1;
+ }*/
+ if (strcmp(argv[i], "-font") == 0 || strcmp(argv[i], "-fn") == 0)
+ {
+ startfont = new QString(argv[i+1]);
+ found = 2;
+ }
+ if (strcmp(argv[i], "-geometry") == 0 || strcmp(argv[i], "-geom") == 0)
+ {
+ found = 2;
+ QString text(argv[i + 1]);
+ QStringList list = QStringList::split(QChar('x'), text);
+ startsize = new QSize(list[0].toInt(), list[1].toInt());
+ }
+ if (strcmp(argv[i], "-display") == 0) //XXX: this does not work,
+ // too many -display options in main.c !
+ // ask Bram ...
+ {
+ gui_argv[gui_argc++] = strdup("--display");
+ gui_argv[gui_argc++] = argv[i+1];
+ found = 0;
+ }
+ if (strcmp(argv[i], "--display") == 0 )
+ {
+ gui_argv[gui_argc++] = argv[i];
+ gui_argv[gui_argc++] = argv[i+1];
+ found = 2;
+ }
+ //KDE/Qt options with no args
+ if (strcmp(argv[i], "--help-kde") == 0
+ || strcmp(argv[i], "--help-qt") == 0
+ || strcmp(argv[i], "--help-all") == 0
+ || strcmp(argv[i], "--reverse") == 0
+ || strcmp(argv[i], "--author") == 0
+ // || strcmp(argv[i], "--version") == 0 //disabled we need these for kcmvim
+ // || strcmp(argv[i], "-v") == 0
+ || strcmp(argv[i], "--license") == 0
+ || strcmp(argv[i], "--cmap") == 0
+ || strcmp(argv[i], "--nograb") == 0
+ || strcmp(argv[i], "--dograb") == 0
+ || strcmp(argv[i], "--sync") == 0
+ || strcmp(argv[i], "--noxim") == 0
+ || strcmp(argv[i], "--nocrashhandler") == 0
+ || strcmp(argv[i], "--waitforwm") == 0
+ )
+ {
+ gui_argv[gui_argc++] = argv[i];
+ found = 1;
+ }
+ //this outputs KDE and Vim versions :)
+ if (strcmp(argv[i], "--version") == 0
+ || strcmp(argv[i], "-v") == 0)
+ {
+ gui_argv[gui_argc++] = argv[i];
+ }
+
+
+ // KDE/Qt options with one arg
+ if (strcmp(argv[i], "--session") == 0
+ || strcmp(argv[i], "--ncols") == 0
+ || strcmp(argv[i], "--bg") == 0
+ || strcmp(argv[i], "--background") == 0
+ || strcmp(argv[i], "--fg") == 0
+ || strcmp(argv[i], "--foreground") == 0
+ || strcmp(argv[i], "--btn") == 0
+ || strcmp(argv[i], "--name") == 0
+ || strcmp(argv[i], "--title") == 0
+ || strcmp(argv[i], "--inputstyle") == 0
+ || strcmp(argv[i], "--im") == 0
+ || strcmp(argv[i], "--caption") == 0
+ || strcmp(argv[i], "--icon") == 0
+ || strcmp(argv[i], "--miniicon") == 0
+ || strcmp(argv[i], "--config") == 0
+ || strcmp(argv[i], "--dcopserver") == 0
+ || strcmp(argv[i], "--style") == 0
+ || strcmp(argv[i], "--geometry") == 0
+ || strcmp(argv[i], "--smkey") == 0
+ || strcmp(argv[i], "-smkey") == 0
+ || strcmp(argv[i], "-session") == 0
+ )
+ {
+ gui_argv[gui_argc++] = argv[i];
+ gui_argv[gui_argc++] = argv[i + 1];
+ found = 2;
+ }
+
+ // remove from the list of argv
+ if (found >= 1 && --*argc > i)
+ {
+ mch_memmove(&argv[i], &argv[i + 1], (*argc - i) * sizeof(char *));
+ i--;
}
- KCmdLineArgs::init( gui_argc,gui_argv,"kvim", I18N_NOOP("Vim inside KDE"),VIM_VERSION_SHORT);
+ }
+ KCmdLineArgs::init(gui_argc, gui_argv, "kvim",
+ I18N_NOOP("Vim inside KDE"), VIM_VERSION_SHORT);
}// }}}
/****************************************************************************
/*
* Initialises time intervals for the cursor blinking
*/
- void
+ void
gui_mch_set_blinking(long waittime, long on, long off)//{{{
{
- gui.w->set_blink_time( waittime, on, off );
+ gui.w->set_blink_time(waittime, on, off);
}//}}}
/*
* Stop the cursor blinking. Show the cursor if it wasn't shown.
*/
- void
+ void
gui_mch_stop_blink()//{{{
{
- gui.w->stop_cursor_blinking();
+ gui.w->stop_cursor_blinking();
}//}}}
/*
* Start the cursor blinking. If it was already blinking, this restarts the
* waiting time and shows the cursor.
*/
- void
+ void
gui_mch_start_blink()//{{{
{
- gui.w->start_cursor_blinking();
+ gui.w->start_cursor_blinking();
}//}}}
#ifdef FEAT_MZSCHEME
- void
+ void
mzscheme_kde_start_timer()//{{{
{
- gui.w->enable_mzscheme_threads();
+ gui.w->enable_mzscheme_threads();
}//}}}
- void
+ void
mzscheme_kde_stop_timer()//{{{
{
- gui.w->disable_mzscheme_threads();
+ gui.w->disable_mzscheme_threads();
}//}}}
#endif
* Check if the GUI can be started. Called before gvimrc is sourced.
* Return OK or FAIL.
*/
- int
+ int
gui_mch_init_check(void)//{{{
{
- gui.dpy = qt_xdisplay();
- return OK;
+ gui.dpy = qt_xdisplay();
+ return OK;
}//}}}
/*
* Initialise the X GUI. Create all the windows, set up all the call-backs etc.
* Returns OK for success, FAIL when the GUI can't be started.
*/
- int
+ int
gui_mch_init()//{{{
{
- (void) new KApplication();
- KApplication::kApplication()->dcopClient()->registerAs(KApplication::kApplication()->name(),false);
-// dbf("%s %s",KGlobal::locale()->language().latin1(),KLocale::defaultLanguage().latin1());
+ (void) new KApplication();
+ KApplication::kApplication()->dcopClient()->registerAs(
+ KApplication::kApplication()->name(), false);
+ // dbf("%s %s", KGlobal::locale()->language().latin1(), KLocale::defaultLanguage().latin1());
- vmw = new VimMainWindow("KVim",0);
- vmw->setFrameBorderWidth(0);
- kapp->setMainWidget(vmw);
- kapp->setTopWidget(vmw);
+ vmw = new VimMainWindow("KVim", 0);
+ vmw->setFrameBorderWidth(0);
+ kapp->setMainWidget(vmw);
+ kapp->setTopWidget(vmw);
- sbpool = new SBPool;
+ sbpool = new SBPool;
#if QT_VERSION>=300
- vmw->connect(kapp->clipboard(),SIGNAL(selectionChanged()),vmw,SLOT(clipboard_selection_update()));
+ vmw->connect(kapp->clipboard(), SIGNAL(selectionChanged()),
+ vmw, SLOT(clipboard_selection_update()));
#endif
- vmw->connect(kapp->clipboard(),SIGNAL(dataChanged()),vmw,SLOT(clipboard_data_update()));
- clip_lose_selection(&clip_plus);
- clip_lose_selection(&clip_star);
+ vmw->connect(kapp->clipboard(), SIGNAL(dataChanged()),
+ vmw, SLOT(clipboard_data_update()));
+ clip_lose_selection(&clip_plus);
+ clip_lose_selection(&clip_star);
- gui.in_focus = FALSE; // will be updated
+ gui.in_focus = FALSE; // will be updated
- if (reverse) {
- gui.def_norm_pixel = gui_get_color((char_u *)"White");
- gui.def_back_pixel = gui_get_color((char_u *)"Black");
+ if (reverse)
+ {
+ gui.def_norm_pixel = gui_get_color((char_u *)"White");
+ gui.def_back_pixel = gui_get_color((char_u *)"Black");
#if QT_VERSION>=300
- gui.w->setEraseColor ( QColor(Qt::black) );
+ gui.w->setEraseColor(QColor(Qt::black));
#else
- gui.w->setBackgroundColor ( QColor(Qt::black) );
+ gui.w->setBackgroundColor(QColor(Qt::black));
#endif
- } else {
- gui.def_norm_pixel = gui_get_color((char_u *)"Black");
- gui.def_back_pixel = gui_get_color((char_u *)"White");
+ }
+ else
+ {
+ gui.def_norm_pixel = gui_get_color((char_u *)"Black");
+ gui.def_back_pixel = gui_get_color((char_u *)"White");
#if QT_VERSION>=300
- gui.w->setEraseColor ( QColor(Qt::white) );
+ gui.w->setEraseColor(QColor(Qt::white));
#else
- gui.w->setBackgroundColor ( QColor(Qt::white) );
+ gui.w->setBackgroundColor(QColor(Qt::white));
#endif
- }
+ }
- gui.norm_pixel = gui.def_norm_pixel;
- gui.back_pixel = gui.def_back_pixel;
+ gui.norm_pixel = gui.def_norm_pixel;
+ gui.back_pixel = gui.def_back_pixel;
- gui.border_width = 1;
- gui.border_offset = 1;//gui.border_width;
- gui.scrollbar_width=SB_DEFAULT_WIDTH;
- gui.scrollbar_height=SB_DEFAULT_WIDTH;
+ gui.border_width = 1;
+ gui.border_offset = 1;//gui.border_width;
+ gui.scrollbar_width = SB_DEFAULT_WIDTH;
+ gui.scrollbar_height = SB_DEFAULT_WIDTH;
- //gui.menu_height=vmw->menuBar()->height()+1;
- //gui.toolbar_height=vmw->toolBar()->height();
+ //gui.menu_height = vmw->menuBar()->height()+1;
+ //gui.toolbar_height = vmw->toolBar()->height();
- return OK;
+ return OK;
}//}}}
/*
* Called when the foreground or background color has been changed.
*/
- void
+ void
gui_mch_new_colors()//{{{
{
- QColor rgb;
- rgb.setRgb(gui.back_pixel);
+ QColor rgb;
+ rgb.setRgb(gui.back_pixel);
#if QT_VERSION>=300
- gui.w->setEraseColor(rgb);
+ gui.w->setEraseColor(rgb);
#else
- gui.w->setBackgroundColor(rgb);
+ gui.w->setBackgroundColor(rgb);
#endif
}//}}}
/*
* Open the GUI window which was created by a call to gui_mch_init().
*/
- int
+ int
gui_mch_open()//{{{
{
- gui.dpy=qt_xdisplay();
- set_normal_colors();
+ gui.dpy = qt_xdisplay();
+ set_normal_colors();
- /* Check that none of the colors are the same as the background color */
- gui_check_colors();
+ /* Check that none of the colors are the same as the background color */
+ gui_check_colors();
- /* Get the colors for the highlight groups (gui_check_colors() might have
- * changed them).
- */
- highlight_gui_started(); /* re-init colors and fonts */
+ /* Get the colors for the highlight groups (gui_check_colors() might have
+ * changed them).
+ */
+ highlight_gui_started(); /* re-init colors and fonts */
#ifdef FEAT_MENU
- vmw->w->menu = new QPopupMenu(vmw);
+ vmw->w->menu = new QPopupMenu(vmw);
#if QT_VERSION>=300
- vmw->w->menu->insertItem(SmallIcon("ktip"), i18n("&Tip of the day..."), vmw, SLOT(showTipOfTheDay()));
- vmw->w->menu->insertSeparator();
+ vmw->w->menu->insertItem(SmallIcon("ktip"), i18n("&Tip of the day..."),
+ vmw, SLOT(showTipOfTheDay()));
+ vmw->w->menu->insertSeparator();
#endif
- if (vmw->have_tearoff) vmw->w->menu->insertTearOffHandle(0,0);
- vmw->w->menu->insertItem(i18n("&Report Bug ..."), vmw, SLOT(showBugReport()));
- vmw->w->menu->insertSeparator();
- vmw->w->menu->insertItem(SmallIcon("kvim"), i18n("&About KVim..."), vmw, SLOT(showAboutApplication()));
- vmw->w->menu->insertItem(SmallIcon("about_kde"), i18n("About &KDE..."), vmw, SLOT(showAboutKDE()));
- vmw->menuBar()->insertItem("&KVim", vmw->w->menu);
+ if (vmw->have_tearoff)
+ vmw->w->menu->insertTearOffHandle(0, 0);
+ vmw->w->menu->insertItem(i18n("&Report Bug ..."),
+ vmw, SLOT(showBugReport()));
+ vmw->w->menu->insertSeparator();
+ vmw->w->menu->insertItem(SmallIcon("kvim"), i18n("&About KVim..."),
+ vmw, SLOT(showAboutApplication()));
+ vmw->w->menu->insertItem(SmallIcon("about_kde"), i18n("About &KDE..."),
+ vmw, SLOT(showAboutKDE()));
+ vmw->menuBar()->insertItem("&KVim", vmw->w->menu);
#endif
- if (startfont!=NULL)
- gui_mch_init_font((char_u*)startfont->latin1(), FALSE);
+ if (startfont != NULL)
+ gui_mch_init_font((char_u*)startfont->latin1(), FALSE);
- if (startsize!=NULL)
- vmw->resize(startsize->width(), startsize->height());
+ if (startsize != NULL)
+ vmw->resize(startsize->width(), startsize->height());
- gui_mch_update_codec();
+ gui_mch_update_codec();
- if (kapp->isRestored())
- if (KMainWindow::canBeRestored(1))
- vmw->restore(1);
+ if (kapp->isRestored())
+ if (KMainWindow::canBeRestored(1))
+ vmw->restore(1);
- vmw->show();
+ vmw->show();
#if QT_VERSION>=300
- if (tip==2) KTipDialog::showTip (vmw,QString::null,true);
- else if (tip==0) KTipDialog::showTip (vmw);
+ if (tip == 2)
+ KTipDialog::showTip(vmw, QString::null, true);
+ else if (tip == 0)
+ KTipDialog::showTip(vmw);
#endif
- return OK;
+ return OK;
}//}}}
- void
+ void
gui_mch_exit(int rc)//{{{
{
- kapp->quit();
+ kapp->quit();
}//}}}
/*
* Get the position of the top left corner of the window.
*/
- int
+ int
gui_mch_get_winpos(int *x, int *y)//{{{
{
- *x = vmw->x();
- *y = vmw->y();
- return OK;
+ *x = vmw->x();
+ *y = vmw->y();
+ return OK;
}//}}}
/*
* Set the position of the top left corner of the window to the given
* coordinates.
*/
- void
+ void
gui_mch_set_winpos(int x, int y)//{{{
{
- vmw->move(x,y);
+ vmw->move(x, y);
}//}}}
/*
* ->resize VimWidget
* ->resize vmw (block any events generated from here)
*/
-void
+ void
gui_mch_set_shellsize(int width, int height,//{{{
int min_width, int min_height,
int base_width, int base_height)
{
- //resize VimWidget
- vmw->w->resize(width,height);
-
- //resize vmw
- int vheight, vwidth;
- vheight = height;
- vwidth = width;
-
- if (gui.which_scrollbars[SBAR_LEFT]) vwidth+=gui.scrollbar_width;
- if (gui.which_scrollbars[SBAR_RIGHT]) vwidth+=gui.scrollbar_width;
- if (gui.which_scrollbars[SBAR_BOTTOM]) vheight+=gui.scrollbar_height;
-
- if (vmw->menuBar()->isVisible() && vmw->menuBar()->isEnabled()
+ //resize VimWidget
+ vmw->w->resize(width, height);
+
+ //resize vmw
+ int vheight, vwidth;
+ vheight = height;
+ vwidth = width;
+
+ if (gui.which_scrollbars[SBAR_LEFT])
+ vwidth += gui.scrollbar_width;
+ if (gui.which_scrollbars[SBAR_RIGHT])
+ vwidth += gui.scrollbar_width;
+ if (gui.which_scrollbars[SBAR_BOTTOM])
+ vheight += gui.scrollbar_height;
+
+ if (vmw->menuBar()->isVisible() && vmw->menuBar()->isEnabled()
#if QT_VERSION>=300
- && !vmw->menuBar()->isTopLevelMenu()
+ && !vmw->menuBar()->isTopLevelMenu()
#endif
- )
- vheight += vmw->menuBar()->height();
+ )
+ vheight += vmw->menuBar()->height();
#ifdef FEAT_TOOLBAR
- if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled() &&
- (vmw->toolBar()->barPos()==KToolBar::Top ||
- vmw->toolBar()->barPos()==KToolBar::Bottom))
- vheight += vmw->toolBar()->height();
-
- if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled() &&
- (vmw->toolBar()->barPos()==KToolBar::Left ||
- vmw->toolBar()->barPos()==KToolBar::Right))
- vwidth += vmw->toolBar()->width();
+ if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled()
+ && (vmw->toolBar()->barPos() == KToolBar::Top
+ || vmw->toolBar()->barPos() == KToolBar::Bottom))
+ vheight += vmw->toolBar()->height();
+
+ if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled()
+ && (vmw->toolBar()->barPos() == KToolBar::Left
+ || vmw->toolBar()->barPos() == KToolBar::Right))
+ vwidth += vmw->toolBar()->width();
#endif
- vmw->lock();
- vmw->resize(vwidth,vheight);
- gui_mch_update();
- //size should be nearly perfect, update baseSize and sizeIncrement
- vmw->setBaseSize(base_width,vmw->menuBar()->height()+1+vmw->toolBar()->height()+gui.char_height*2);
- vmw->setSizeIncrement( ( ( int )( gui.char_width/2 )*2 ),gui.char_height);
- vmw->unlock();
+ vmw->lock();
+ vmw->resize(vwidth, vheight);
+ gui_mch_update();
+ //size should be nearly perfect, update baseSize and sizeIncrement
+ vmw->setBaseSize(base_width, vmw->menuBar()->height() + 1
+ + vmw->toolBar()->height() + gui.char_height * 2);
+ vmw->setSizeIncrement((( int )(gui.char_width / 2) * 2), gui.char_height);
+ vmw->unlock();
}//}}}
* then the screen. This subtracts some room for menubar, toolbar and window
* decorations.
*/
- void
+ void
gui_mch_get_screen_dimensions(int *screen_w, int *screen_h)//{{{
{
- *screen_w = kapp->desktop()->width();
- *screen_h = kapp->desktop()->height();
+ *screen_w = kapp->desktop()->width();
+ *screen_h = kapp->desktop()->height();
}//}}}
#if defined(FEAT_MENU) || defined(PROTO)
- void
+ void
gui_mch_enable_menu(int showit)//{{{
{
- if (showit)
- vmw->menuBar()->show();
- else
- vmw->menuBar()->hide();
- vmw->resize(vmw->width(),vmw->height());
+ if (showit)
+ vmw->menuBar()->show();
+ else
+ vmw->menuBar()->hide();
+ vmw->resize(vmw->width(), vmw->height());
}//}}}
#endif
#if defined(FEAT_TOOLBAR) || defined(PROTO)
- void
+ void
gui_mch_show_toolbar(int showit)//{{{
{
- if (showit)
- vmw->toolBar()->show();
- else
- vmw->toolBar()->hide();
- vmw->resize(vmw->width(),vmw->height());
+ if (showit)
+ vmw->toolBar()->show();
+ else
+ vmw->toolBar()->hide();
+ vmw->resize(vmw->width(), vmw->height());
}//}}}
#endif
* Return NULL when cancelled.
*/
-char_u *gui_mch_font_dialog (char_u *oldval)//{{{
+ char_u *
+gui_mch_font_dialog(char_u *oldval)//{{{
{
- QFont myFont( vmw->w->font() );
- if (gui.fontname) {
- gui.fontname=NULL;
- }
- int result = KFontDialog::getFont( myFont, true );
- if ( result != KFontDialog::Accepted ) {
- return NULL;
- }
-// myFont.setFixedPitch(true);
+ QFont myFont(vmw->w->font());
+ if (gui.fontname)
+ gui.fontname = NULL;
+
+ int result = KFontDialog::getFont(myFont, true);
+ if (result != KFontDialog::Accepted)
+ return NULL;
+
+ // myFont.setFixedPitch(true);
#if QT_VERSION>=300
- QString n = myFont.toString();
+ QString n = myFont.toString();
#else
- QString n = KVimUtils::toString(&myFont);
+ QString n = KVimUtils::toString(&myFont);
#endif
- n.replace(QRegExp(","),"/");
- gui.fontname = (char_u *)strdup((const char *)n);
- n.replace(QRegExp(" "),"\\ ");
- n=QString("To set this font as your default font for KVim, edit your ~/.gvimrc file and add the following lines : \nif has(\"gui_kde\")\nset guifont=")+n+QString("\nendif");// \n OR \n use the control center of KDE and choose the correct fixed font");
+ n.replace(QRegExp(","), "/");
+ gui.fontname = (char_u *)strdup((const char *)n);
+ n.replace(QRegExp(" "), "\\ ");
+ n = QString("To set this font as your default font for KVim, edit your ~/.gvimrc file and add the following lines : \nif has(\"gui_kde\")\nset guifont=")+n+QString("\nendif");// \n OR \n use the control center of KDE and choose the correct fixed font");
- //display a message box which explains how to save your font settings
- KMessageBox::information(vmw, n,"Font Selection", "kvimselectfont");
+ //display a message box which explains how to save your font settings
+ KMessageBox::information(vmw, n, "Font Selection", "kvimselectfont");
- return vim_strsave(gui.fontname);
+ return vim_strsave(gui.fontname);
}//}}}
/*
* Initialise vim to use the font with the given name.
* Return FAIL if the font could not be loaded, OK otherwise.
*/
- int
+ int
gui_mch_init_font(char_u * font_name, int fontset)//{{{
{
- QString fontname;
- GuiFont font = NULL;
+ QString fontname;
+ GuiFont font = NULL;
- if (font_name == NULL)
- {
+ if (font_name == NULL)
+ {
#if 0
#if QT_VERSION>=300
- KConfig *base = KGlobal::config();
+ KConfig *base = KGlobal::config();
#else
- KConfigBase *base = KGlobal::config();
+ KConfigBase *base = KGlobal::config();
#endif
- base->setGroup("General");
- if (!base->hasKey("fixed")) {
- KMessageBox::error(KApplication::kApplication()->mainWidget(),"Cannot load default fixed font\n\nConfigure fonts in KDE Control Center.\n(Just click 'Choose...', 'OK' and then 'Apply')");
- return FAIL;
- }
+ base->setGroup("General");
+ if (!base->hasKey("fixed"))
+ {
+ KMessageBox::error(KApplication::kApplication()->mainWidget(),"Cannot load default fixed font\n\nConfigure fonts in KDE Control Center.\n(Just click 'Choose...', 'OK' and then 'Apply')");
+ return FAIL;
+ }
#if QT_VERSION>=300
- QString f = base->readEntry("fixed");
+ QString f = base->readEntry("fixed");
#else
- QFont ft = base->readFontEntry("fixed", NULL);
- QString f = KVimUtils::toString(&ft);
+ QFont ft = base->readFontEntry("fixed", NULL);
+ QString f = KVimUtils::toString(&ft);
#endif
- font_name = (char_u*)strdup(f.latin1()); //latin1 ?
+ font_name = (char_u*)strdup(f.latin1()); //latin1 ?
#else
- font_name = (char_u*)strdup("misc-fixed/10/-1/5/50/0/0/0/1/0");
+ font_name = (char_u*)strdup("misc-fixed/10/-1/5/50/0/0/0/1/0");
#endif
- }
- fontname = (const char *)font_name;
-/* fontname.replace(QRegExp("/"),",");
+ }
+ fontname = (const char *)font_name;
+ /* fontname.replace(QRegExp("/"), ",");
font = new QFont();
font->fromString( fontname );
-*/
+ */
#ifdef FEAT_XFONTSET
- if (fontset)
- font = gui_mch_get_fontset(font_name, TRUE, TRUE);
- if (font == NULL)
+ if (fontset)
+ font = gui_mch_get_fontset(font_name, TRUE, TRUE);
+ if (font == NULL)
#endif
- font = gui_mch_get_font(font_name, FALSE);
+ font = gui_mch_get_font(font_name, FALSE);
- if (font == NULL)
- return FAIL;
- if (fontname.contains('*') && fontname.contains('-'))
- return FAIL;
+ if (font == NULL)
+ return FAIL;
+ if (fontname.contains('*') && fontname.contains('-'))
+ return FAIL;
- gui_mch_free_font(gui.norm_font);
+ gui_mch_free_font(gui.norm_font);
#ifdef FEAT_XFONTSET
- gui_mch_free_fontset(gui.fontset);
- gui.fontset = NOFONTSET;
- if (fontset)
- {
- gui.fontset = font;
- gui.norm_font = NOFONT;
- }
- else
+ gui_mch_free_fontset(gui.fontset);
+ gui.fontset = NOFONTSET;
+ if (fontset)
+ {
+ gui.fontset = font;
+ gui.norm_font = NOFONT;
+ }
+ else
#endif
- gui.norm_font = font;
-
- /* Compute the width of the character cell. Some fonts include
- * double-width characters. Use the width of ASCII characters to find
- * out if this is so. */
- QFontMetrics f(*font);
- int width_max = 0;
- for (char c = 32; c < 127; c++)
- if (width_max < f.width((QChar)c))
- width_max = f.width((QChar)c);
- if (width_max <= f.maxWidth() / 2)
- width_max = f.maxWidth() / 2;
- gui.char_width = width_max;
- gui.char_height = f.height()+p_linespace;
- gui.char_ascent = f.ascent()+p_linespace;
-
- //check values, just to make sure and avoid a crash
- if (gui.char_width<=0) gui.char_width=8;
- if (gui.char_height<=0) gui.char_height=1;
-
- hl_set_font_name(font_name);
-
- return OK;
+ gui.norm_font = font;
+
+ /* Compute the width of the character cell. Some fonts include
+ * double-width characters. Use the width of ASCII characters to find
+ * out if this is so. */
+ QFontMetrics f(*font);
+ int width_max = 0;
+ for (char c = 32; c < 127; c++)
+ if (width_max < f.width((QChar)c))
+ width_max = f.width((QChar)c);
+ if (width_max <= f.maxWidth() / 2)
+ width_max = f.maxWidth() / 2;
+ gui.char_width = width_max;
+ gui.char_height = f.height() + p_linespace;
+ gui.char_ascent = f.ascent() + p_linespace;
+
+ //check values, just to make sure and avoid a crash
+ if (gui.char_width <= 0)
+ gui.char_width = 8;
+ if (gui.char_height <= 0)
+ gui.char_height = 1;
+
+ hl_set_font_name(font_name);
+
+ vmw->w->setFont(*font);
+
+ return OK;
}//}}}
- GuiFont
+ GuiFont
gui_mch_get_font(char_u * name, int report_error)//{{{
{
- QString fontname((const char *)name);
- if (!gui.in_use || name == NULL)
- return NOFONT;
- if (fontname.contains('*') && fontname.contains('-'))
- return NOFONT; // XFLD names not allowed anymore
- QFont *myFont = new QFont();
- fontname.replace(QRegExp("/"),",");
-// myFont->setRawMode(TRUE);
+ QString fontname((const char *)name);
+ if (!gui.in_use || name == NULL)
+ return NOFONT;
+ if (fontname.contains('*') && fontname.contains('-'))
+ return NOFONT; // XFLD names not allowed anymore
+ QFont *myFont = new QFont();
+ fontname.replace(QRegExp("/"), ",");
+ // myFont->setRawMode(TRUE);
#if QT_VERSION>=300
- myFont->fromString(fontname);
+ myFont->fromString(fontname);
#else
- KVimUtils::fromString(myFont,fontname);
+ KVimUtils::fromString(myFont, fontname);
#endif
- myFont->setFixedPitch(true);
- if (!myFont->fixedPitch()) dbf("Non fixed-width font");
- return (GuiFont) myFont;
+ myFont->setFixedPitch(true);
+ if (!myFont->fixedPitch())
+ dbf("Non fixed-width font");
+ return (GuiFont) myFont;
}//}}}
/*
* Don't know how to get the actual name, thus use the provided name.
*/
char_u *
-gui_mch_get_fontname(font, name)
- GuiFont font;
- char_u *name;
+gui_mch_get_fontname(GuiFont font, char_u *name)//{{{
{
if (name == NULL)
return NULL;
return vim_strsave(name);
-}
+}//}}}
/*
* Set the current text font.
* Since we create all GC on demand, we use just gui.current_font to
* indicate the desired current font.
*/
- void
+ void
gui_mch_set_font(GuiFont font)//{{{
{
- gui.current_font=font;
- gui.w->painter->setFont( *(gui.current_font) );
+ gui.current_font = font;
+ gui.w->painter->setFont(*(gui.current_font));
}//}}}
/*
* If a font is not going to be used, free its structure.
*/
- void
+ void
gui_mch_free_font(GuiFont font)//{{{
{
if (font)
delete font; // this is a QFont , we can delete it :)
}//}}}
-GuiFontset gui_mch_get_fontset (char_u *name, int report_error, int fixed_width)
+ GuiFontset
+gui_mch_get_fontset(char_u *name, int report_error, int fixed_width)
{
- return (GuiFontset)gui_mch_get_font(name,report_error);
+ return (GuiFontset)gui_mch_get_font(name, report_error);
}
-void gui_mch_set_fontset (GuiFontset fontset)
+ void
+gui_mch_set_fontset(GuiFontset fontset)
{
gui_mch_set_font((GuiFont)fontset);
}
-void gui_mch_free_fontset (GuiFontset fontset)
+ void
+gui_mch_free_fontset(GuiFontset fontset)
{
if (fontset)
delete fontset;
}
-void gui_mch_settitle (char_u *title, char_u *icon)//{{{
+ void
+gui_mch_settitle(char_u *title, char_u *icon)//{{{
{
- if (!gui.in_use) /* can't do this when GUI not running */
- return;
- vmw->setPlainCaption((const char *)title);
- QPixmap p((const char *)icon);
- vmw->setIcon(p); //FIXME
+ if (!gui.in_use) /* can't do this when GUI not running */
+ return;
+ vmw->setPlainCaption((const char *)title);
+ QPixmap p((const char *)icon);
+ vmw->setIcon(p); //FIXME
}//}}}
/*
* Programmer's Guide.
* Return -1 for error.
*/
- guicolor_T
+ guicolor_T
gui_mch_get_color(char_u * name)//{{{
{
- int i;
- static char *(vimnames[][2]) =
+ int i;
+ static char *(vimnames[][2]) =
+ {
+ /* A number of colors that some X11 systems don't have */
+ {"LightRed", "#FFA0A0"},
+ {"LightGreen", "#80FF80"},
+ {"LightMagenta", "#FFA0FF"},
+ {"DarkCyan", "#008080"},
+ {"DarkBlue", "#0000C0"},
+ {"DarkRed", "#C00000"},
+ {"DarkMagenta", "#C000C0"},
+ {"DarkGrey", "#C0C0C0"},
+ {NULL, NULL}
+ };
+
+ if (!gui.in_use) /* can't do this when GUI not running */
+ return (guicolor_T)(-1);
+
+ QColor _color((const char *)name);
+
+ if (_color.isValid())
+ {
+ // return (_color.red() << 16) + ((_color.green() << 8))
+ // + (_color.blue());
+ return _color.rgb();
+ // return (guicolor_T) _color.pixel();
+ }
+
+ /* add a few builtin names */
+ for (i = 0;; ++i)
+ {
+ if (vimnames[i][0] == NULL)
+ return (guicolor_T)(-1);
+ if (STRICMP(name, vimnames[i][0]) == 0)
{
- /* A number of colors that some X11 systems don't have */
- {"LightRed", "#FFA0A0"},
- {"LightGreen", "#80FF80"},
- {"LightMagenta", "#FFA0FF"},
- {"DarkCyan", "#008080"},
- {"DarkBlue", "#0000C0"},
- {"DarkRed", "#C00000"},
- {"DarkMagenta", "#C000C0"},
- {"DarkGrey", "#C0C0C0"},
- {NULL, NULL}
- };
-
- if (!gui.in_use) /* can't do this when GUI not running */
- return (guicolor_T)(-1);
-
- QColor _color((const char *)name);
-
-
- if (_color.isValid()) {
- //return (_color.red() << 16) + ((_color.green() << 8)) + (_color.blue());
- return _color.rgb();
- //return (guicolor_T) _color.pixel();
- }
-
- /* add a few builtin names */
- for (i = 0;; ++i) {
- if (vimnames[i][0] == NULL)
- return (guicolor_T)(-1);
- if (STRICMP(name, vimnames[i][0]) == 0) {
- name = (char_u *) vimnames[i][1];
- return gui_mch_get_color(name);
- }
+ name = (char_u *) vimnames[i][1];
+ return gui_mch_get_color(name);
}
+ }
- return (guicolor_T)(-1); // dead code, should not be reached..
+ return (guicolor_T)(-1); // dead code, should not be reached..
}//}}}
/*
* Set the current text foreground color.
*/
- void
+ void
gui_mch_set_fg_color(guicolor_T color)//{{{
{
- QColor rgb;
- rgb.setRgb(color);
- gui.w->painter->setPen( rgb );
+ QColor rgb;
+ rgb.setRgb(color);
+ gui.w->painter->setPen(rgb);
}//}}}
/*
* Set the current text background color.
*/
- void
+ void
gui_mch_set_bg_color(guicolor_T color)//{{{
{
- QColor rgb;
- rgb.setRgb(color);
- gui.w->painter->setBackgroundColor(rgb);
+ QColor rgb;
+ rgb.setRgb(color);
+ gui.w->painter->setBackgroundColor(rgb);
}//}}}
/*
*
* hide: TRUE = use blank ptr, FALSE = use parent ptr
*/
- void
+ void
gui_mch_mousehide(int hide)//{{{
{
- if (hide == gui.pointer_hidden) return;
- //#ifdef FEAT_MOUSESHAPE
- // if (!hide) mch_set_mouse_shape(last_shape);
- //#else
+ if (hide == gui.pointer_hidden)
+ return;
+ //#ifdef FEAT_MOUSESHAPE
+ // if (!hide) mch_set_mouse_shape(last_shape);
+ //#else
# if (QT_VERSION<300)
- gui.w->setCursor((hide)?BlankCursor:ArrowCursor);
+ gui.w->setCursor((hide)?BlankCursor:ArrowCursor);
# else
- gui.w->setCursor((hide)?Qt::BlankCursor:Qt::ArrowCursor);
+ gui.w->setCursor((hide)?Qt::BlankCursor:Qt::ArrowCursor);
# endif
- //#endif
- gui.pointer_hidden = hide;
+ //#endif
+ gui.pointer_hidden = hide;
}//}}}
- void
+ void
gui_mch_update_codec()
{
#ifdef FEAT_MBYTE
- if (!gui.in_use) return;
- vmw->codec = QTextCodec::codecForName((const char *)p_enc);
- if (vmw->codec==NULL)
- vmw->codec = QTextCodec::codecForName(KVimUtils::convertEncodingName(QString((const char*)p_enc)));
- if (vmw->codec==NULL)
- vmw->codec = QTextCodec::codecForLocale();
+ if (!gui.in_use)
+ return;
+ vmw->codec = QTextCodec::codecForName((const char *)p_enc);
+ if (vmw->codec == NULL)
+ vmw->codec = QTextCodec::codecForName(
+ KVimUtils::convertEncodingName(QString((const char*)p_enc)));
+ if (vmw->codec == NULL)
+ vmw->codec = QTextCodec::codecForLocale();
#else
- vmw->codec = QTextCodec::codecForLocale();
+ vmw->codec = QTextCodec::codecForLocale();
#endif
- if (vmw->codec==NULL)
- vmw->codec = QTextCodec::codecForName("ISO-8859-1"); //fallback
+ if (vmw->codec == NULL)
+ vmw->codec = QTextCodec::codecForName("ISO-8859-1"); //fallback
}
- void
+ void
gui_mch_draw_string(int row, int col, char_u * s, int len, int flags)//{{{
{
- QString text = vmw->codec->toUnicode((const char *)s,len);
- gui.w->draw_string( TEXT_X(col), TEXT_Y(row), text, text.length(), flags );
+ QString text = vmw->codec->toUnicode((const char *)s, len);
+ gui.w->draw_string(TEXT_X(col), TEXT_Y(row), text, text.length(), flags);
}//}}}
#if defined(FEAT_TITLE) || defined(PROTO)
/*
* Return the text window-id and display. Only required for X-based GUI's
*/
- int
+ int
gui_get_x11_windis(Window * win, Display ** dis)//{{{
{
- *win = /*vmw*/gui.w->winId();
- *dis = qt_xdisplay();
- return OK;
+ *win = /*vmw*/gui.w->winId();
+ *dis = qt_xdisplay();
+ return OK;
}//}}}
#endif
- void
+ void
gui_mch_beep()//{{{
{
- kapp->beep();
+ kapp->beep();
}//}}}
- void
+ void
gui_mch_flash(int msec)//{{{
{
- gui.w->flash();
+ gui.w->flash();
}//}}}
/*
* Invert a rectangle from row r, column c, for nr rows and nc columns.
*/
- void
+ void
gui_mch_invert_rectangle(int r, int c, int nr, int nc)//{{{
{
- bitBlt (
- gui.w,
- FILL_X(c), FILL_Y(r),
- gui.w,
- FILL_X(c), FILL_Y(r),
- (nc) * gui.char_width,
- (nr) * gui.char_height,
- Qt::NotROP, // raster Operation
- true ); // ignoreMask
+ bitBlt(gui.w,
+ FILL_X(c), FILL_Y(r),
+ gui.w,
+ FILL_X(c), FILL_Y(r),
+ (nc) * gui.char_width,
+ (nr) * gui.char_height,
+ Qt::NotROP, // raster Operation
+ true); // ignoreMask
}//}}}
/*
* Iconify the GUI window.
*/
- void
+ void
gui_mch_iconify()//{{{
{
- vmw->showMinimized();
+ vmw->showMinimized();
}//}}}
/*
* Draw a cursor without focus.
*/
- void
+ void
gui_mch_draw_hollow_cursor(guicolor_T color)//{{{
{
- QPainter p(gui.w);
- p.setPen( color );
-
- p.drawRect(FILL_X(gui.col), FILL_Y(gui.row), gui.char_width - 1, gui.char_height - 1 );
+ QPainter p(gui.w);
+ p.setPen(color);
- p.end();
+ p.drawRect(FILL_X(gui.col), FILL_Y(gui.row), gui.char_width - 1,
+ gui.char_height - 1);
+ p.end();
}//}}}
/*
* Draw part of a cursor, "w" pixels wide, and "h" pixels high, using
* color "color".
*/
- void
+ void
gui_mch_draw_part_cursor(int w, int h, guicolor_T color)//{{{
{
- QPainter p(gui.w);
- p.setPen( color );
- p.fillRect(
- FILL_X(gui.col),
- FILL_Y(gui.row) + gui.char_height - h +1,
- w, h-2, QColor( color, color));
- p.drawRect(FILL_X(gui.col),FILL_Y(gui.row) + gui.char_height - h + (int)p_linespace / 2,
- w, h - (int)p_linespace );
-
+ QPainter p(gui.w);
+ p.setPen(color);
+ p.fillRect(
+ FILL_X(gui.col),
+ FILL_Y(gui.row) + gui.char_height - h + 1,
+ w, h - 2, QColor( color, color));
+ p.drawRect(FILL_X(gui.col), FILL_Y(gui.row) + gui.char_height - h
+ + (int)p_linespace / 2,
+ w, h - (int)p_linespace);
}//}}}
* nothing in the X11 event queue (& no timers pending), then we return
* immediately.
*/
- void
+ void
gui_mch_update()//{{{
{
- kapp->processEvents();
+ kapp->processEvents();
}//}}}
* Returns OK if a character was found to be available within the given time,
* or FAIL otherwise.
*/
- int
+ int
gui_mch_wait_for_chars(long wtime)//{{{
{
- // malte@kde.org's gift to KVim ;), thanks to him :) for this hard to find bug
- if (wtime>0) {
- gui.w->wait( wtime );
- while ( vim_is_input_buf_empty() && !gui.w->wait_done )
- kapp->processOneEvent();
- return vim_is_input_buf_empty() ? FAIL : OK;
- } else
- while (vim_is_input_buf_empty() ) {
- kapp->processOneEvent();
- }
-
- return OK;
+ // malte@kde.org's gift to KVim ;), thanks to him :) for this hard to find bug
+ if (wtime > 0)
+ {
+ gui.w->wait(wtime);
+ while (vim_is_input_buf_empty() && !gui.w->wait_done)
+ kapp->processOneEvent();
+ return vim_is_input_buf_empty() ? FAIL : OK;
+ }
+ else
+ while (vim_is_input_buf_empty())
+ kapp->processOneEvent();
+
+ return OK;
}//}}}
/* Flush any output to the screen */
- void
+ void
gui_mch_flush()//{{{
{
- kapp->flushX();
+ kapp->flushX();
}//}}}
/*
* Clear a rectangular region of the screen from text pos (row1, col1) to
* (row2, col2) inclusive.
*/
- void
+ void
gui_mch_clear_block(int row1, int col1, int row2, int col2)//{{{
{
- gui.w->erase (FILL_X(col1), FILL_Y(row1),
- (col2 - col1 + 1) * gui.char_width+ (col2 == Columns - 1),
- (row2 - row1 + 1) * gui.char_height );
+ gui.w->erase(FILL_X(col1), FILL_Y(row1),
+ (col2 - col1 + 1) * gui.char_width + (col2 == Columns - 1),
+ (row2 - row1 + 1) * gui.char_height);
}//}}}
- void
+ void
gui_mch_clear_all(void)//{{{
{
- gui.w->erase();
+ gui.w->erase();
}//}}}
* Delete the given number of lines from the given row, scrolling up any
* text further down within the scroll region.
*/
- void
+ void
gui_mch_delete_lines(int row, int num_lines)//{{{
{
- if (num_lines <= 0)
- return;
-
- if (row + num_lines > gui.scroll_region_bot) {
- /* Scrolled out of region, just blank the lines out */
- gui_clear_block(row, gui.scroll_region_left, gui.scroll_region_bot, gui.scroll_region_right);
- } else {
- bitBlt (
- gui.w,
- FILL_X(gui.scroll_region_left), FILL_Y(row),
- gui.w,
- FILL_X(gui.scroll_region_left), FILL_Y(row + num_lines),
- gui.char_width * (gui.scroll_region_right -gui.scroll_region_left + 1) + 1,
- gui.char_height * (gui.scroll_region_bot - row - num_lines + 1),
- Qt::CopyROP, // raster Operation
- true ); // ignoreMask
-
- /* Update gui.cursor_row if the cursor scrolled or copied over */
- if (gui.cursor_row >= row) {
- if (gui.cursor_row < row + num_lines)
- gui.cursor_is_valid = FALSE;
- else if (gui.cursor_row <= gui.scroll_region_bot)
- gui.cursor_row -= num_lines;
- }
-
- gui_clear_block(gui.scroll_region_bot - num_lines + 1, gui.scroll_region_left,
- gui.scroll_region_bot, gui.scroll_region_right);
-
+ if (num_lines <= 0)
+ return;
+
+ if (row + num_lines > gui.scroll_region_bot)
+ {
+ /* Scrolled out of region, just blank the lines out */
+ gui_clear_block(row, gui.scroll_region_left, gui.scroll_region_bot,
+ gui.scroll_region_right);
+ }
+ else
+ {
+ bitBlt(gui.w,
+ FILL_X(gui.scroll_region_left), FILL_Y(row),
+ gui.w,
+ FILL_X(gui.scroll_region_left), FILL_Y(row + num_lines),
+ gui.char_width * (gui.scroll_region_right
+ - gui.scroll_region_left + 1) + 1,
+ gui.char_height * (gui.scroll_region_bot - row - num_lines + 1),
+ Qt::CopyROP, // raster Operation
+ true); // ignoreMask
+
+ /* Update gui.cursor_row if the cursor scrolled or copied over */
+ if (gui.cursor_row >= row)
+ {
+ if (gui.cursor_row < row + num_lines)
+ gui.cursor_is_valid = FALSE;
+ else if (gui.cursor_row <= gui.scroll_region_bot)
+ gui.cursor_row -= num_lines;
}
+
+ gui_clear_block(gui.scroll_region_bot - num_lines + 1,
+ gui.scroll_region_left,
+ gui.scroll_region_bot, gui.scroll_region_right);
+ }
}//}}}
/*
* Insert the given number of lines before the given row, scrolling down any
* following text within the scroll region.
*/
- void
+ void
gui_mch_insert_lines(int row, int num_lines)//{{{
{
- if (num_lines <= 0)
- return;
-
- if (row + num_lines > gui.scroll_region_bot) {
- /* Scrolled out of region, just blank the lines out */
- gui_clear_block(row, gui.scroll_region_left, gui.scroll_region_bot, gui.scroll_region_right - 1);
- } else {
- bitBlt (
- gui.w,
- FILL_X(gui.scroll_region_left), FILL_Y(row + num_lines),
- gui.w,
- FILL_X(gui.scroll_region_left), FILL_Y(row),
- gui.char_width * ( gui.scroll_region_right - gui.scroll_region_left + 1 ) + 1,
- gui.char_height * (gui.scroll_region_bot - row - num_lines + 1),
- Qt::CopyROP, // raster Operation
- true ); // ignoreMask
-
- /* Update gui.cursor_row if the cursor scrolled or copied over */
- if (gui.cursor_row >= gui.row) {
- if (gui.cursor_row <= gui.scroll_region_bot - num_lines)
- gui.cursor_row += num_lines;
- else if (gui.cursor_row <= gui.scroll_region_bot)
- gui.cursor_is_valid = FALSE;
- }
-
- gui_clear_block(row, gui.scroll_region_left, row + num_lines - 1, gui.scroll_region_right);
+ if (num_lines <= 0)
+ return;
+
+ if (row + num_lines > gui.scroll_region_bot)
+ {
+ /* Scrolled out of region, just blank the lines out */
+ gui_clear_block(row, gui.scroll_region_left, gui.scroll_region_bot,
+ gui.scroll_region_right - 1);
+ }
+ else
+ {
+ bitBlt(gui.w,
+ FILL_X(gui.scroll_region_left), FILL_Y(row + num_lines),
+ gui.w,
+ FILL_X(gui.scroll_region_left), FILL_Y(row),
+ gui.char_width * ( gui.scroll_region_right
+ - gui.scroll_region_left + 1 ) + 1,
+ gui.char_height * (gui.scroll_region_bot - row - num_lines + 1),
+ Qt::CopyROP, // raster Operation
+ true); // ignoreMask
+
+ /* Update gui.cursor_row if the cursor scrolled or copied over */
+ if (gui.cursor_row >= gui.row)
+ {
+ if (gui.cursor_row <= gui.scroll_region_bot - num_lines)
+ gui.cursor_row += num_lines;
+ else if (gui.cursor_row <= gui.scroll_region_bot)
+ gui.cursor_is_valid = FALSE;
}
+
+ gui_clear_block(row, gui.scroll_region_left, row + num_lines - 1,
+ gui.scroll_region_right);
+ }
}//}}}
/*
* X Selection stuff, for cutting and pasting text to other windows.
*/
- void
+ void
clip_mch_request_selection(VimClipboard *cbd)//{{{
{
#if QT_VERSION>=300
- if (cbd==&clip_star) kapp->clipboard()->setSelectionMode(true);
+ if (cbd == &clip_star)
+ kapp->clipboard()->setSelectionMode(true);
#endif
- QString selection = kapp->clipboard()->text();
+ QString selection = kapp->clipboard()->text();
- QCString unistring = vmw->codec->fromUnicode(selection);
- clip_yank_selection(MCHAR,(char_u *)(const char*)unistring,(long) unistring.length(),cbd);
+ QCString unistring = vmw->codec->fromUnicode(selection);
+ clip_yank_selection(MCHAR, (char_u *)(const char*)unistring,
+ (long)unistring.length(), cbd);
#if QT_VERSION>=300
- if (cbd==&clip_star) kapp->clipboard()->setSelectionMode(false);
+ if (cbd == &clip_star)
+ kapp->clipboard()->setSelectionMode(false);
#endif
}//}}}
- void
+ void
clip_mch_lose_selection(VimClipboard *cbd)//{{{
{
- //Don't need to do anything here
- gui_mch_update();
+ // Don't need to do anything here
+ gui_mch_update();
}//}}}
/*
* Check whatever we allready own the selection.
*/
- int
+ int
clip_mch_own_selection(VimClipboard *cbd)//{{{
{
- if (kapp->clipboard()->ownsSelection())
- return OK;
- else {
+ if (kapp->clipboard()->ownsSelection())
+ return OK;
+ else
+ {
#if QT_VERSION>=300
- kapp->clipboard()->setSelectionMode(true);
+ kapp->clipboard()->setSelectionMode(true);
#endif
- return OK;
- }
+ return OK;
+ }
}//}}}
/*
* Send the current selection to the clipboard.
*/
-void
-clip_mch_set_selection(VimClipboard *cbd){//{{{
- char_u *data;
- long_u length;
+ void
+clip_mch_set_selection(VimClipboard *cbd)//{{{
+{
+ char_u *data;
+ long_u length;
- clip_get_selection(cbd);
- if (clip_convert_selection(&data,&length,cbd)<0) return;
+ clip_get_selection(cbd);
+ if (clip_convert_selection(&data, &length, cbd) < 0)
+ return;
- QString selection((const char *) data);
- //We must turncate the string because it is not
- // null terminated
- selection.truncate((uint) length);
+ QString selection((const char *)data);
+ // We must turncate the string because it is not
+ // null terminated
+ selection.truncate((uint) length);
#if QT_VERSION>=300
- if (cbd==&clip_star) kapp->clipboard()->setSelectionMode(true);
+ if (cbd == &clip_star)
+ kapp->clipboard()->setSelectionMode(true);
#endif
- kapp->clipboard()->setText(selection);
+ kapp->clipboard()->setText(selection);
#if QT_VERSION>=300
- kapp->clipboard()->setSelectionMode(false);
+ kapp->clipboard()->setSelectionMode(false);
#endif
}//}}}
/*
* Make a menu item appear either active or not active (grey or not grey).
*/
- void
+ void
gui_mch_menu_grey(vimmenu_T * menu, int grey)//{{{
{
- if ( !menu || !menu->parent || !menu->parent->widget ) return;
- menu->parent->widget->setItemEnabled((int)menu, !grey);
- gui_mch_update();
+ if (!menu || !menu->parent || !menu->parent->widget)
+ return;
+ menu->parent->widget->setItemEnabled((int)menu, !grey);
+ gui_mch_update();
}//}}}
/*
* Make menu item hidden or not hidden.
*/
- void
+ void
gui_mch_menu_hidden(vimmenu_T * menu, int hidden)//{{{
{
- //FIXME: cannot be fixed AFAIK
- gui_mch_menu_grey(menu,hidden); // it's hard to remove an item in a QPopupMenu
+ // FIXME: cannot be fixed AFAIK
+ // it's hard to remove an item in a QPopupMenu
+ gui_mch_menu_grey(menu, hidden);
}//}}}
/*
* This is called after setting all the menus to grey/hidden or not.
*/
- void
+ void
gui_mch_draw_menubar()//{{{
{
- // nothing to do under kde
+ // nothing to do under kde
}//}}}
#endif
/*
* Scrollbar stuff.
*/
- void
-gui_mch_enable_scrollbar(scrollbar_T * sb, int flag)//{{{
+ void
+gui_mch_enable_scrollbar(scrollbar_T *sb, int flag)//{{{
{
- if (!sb->w) return;
- int width = gui.w->width();
- int height = gui.w->height();
- int neww = vmw->width();
- int newh = vmw->height();
-
- if (gui.which_scrollbars[SBAR_LEFT]) width += gui.scrollbar_width;
- if (gui.which_scrollbars[SBAR_RIGHT]) width += gui.scrollbar_width;
- if (gui.which_scrollbars[SBAR_BOTTOM]) height += gui.scrollbar_height;
-
- if (vmw->menuBar()->isVisible() && vmw->menuBar()->isEnabled()
+ if (!sb->w)
+ return;
+ int width = gui.w->width();
+ int height = gui.w->height();
+ int neww = vmw->width();
+ int newh = vmw->height();
+
+ if (gui.which_scrollbars[SBAR_LEFT])
+ width += gui.scrollbar_width;
+ if (gui.which_scrollbars[SBAR_RIGHT])
+ width += gui.scrollbar_width;
+ if (gui.which_scrollbars[SBAR_BOTTOM])
+ height += gui.scrollbar_height;
+
+ if (vmw->menuBar()->isVisible() && vmw->menuBar()->isEnabled()
#if QT_VERSION>=300
- && !vmw->menuBar()->isTopLevelMenu()
+ && !vmw->menuBar()->isTopLevelMenu()
#endif
- )
- height += vmw->menuBar()->height();
+ )
+ height += vmw->menuBar()->height();
#ifdef FEAT_TOOLBAR
- if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled() &&
- (vmw->toolBar()->barPos()==KToolBar::Top ||
- vmw->toolBar()->barPos()==KToolBar::Bottom))
- height += vmw->toolBar()->height();
-
- if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled() &&
- (vmw->toolBar()->barPos()==KToolBar::Left ||
- vmw->toolBar()->barPos()==KToolBar::Right))
- width += vmw->toolBar()->width();
+ if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled()
+ && (vmw->toolBar()->barPos() == KToolBar::Top
+ || vmw->toolBar()->barPos() == KToolBar::Bottom))
+ height += vmw->toolBar()->height();
+
+ if (vmw->toolBar()->isVisible() && vmw->toolBar()->isEnabled()
+ && (vmw->toolBar()->barPos() == KToolBar::Left
+ || vmw->toolBar()->barPos() == KToolBar::Right))
+ width += vmw->toolBar()->width();
#endif
- if ( abs(vmw->width() - width)>5 && (sb->type==SBAR_LEFT || sb->type==SBAR_RIGHT) )
- neww=width;
- if (abs(vmw->height() - height)>5 && (sb->type==SBAR_BOTTOM) )
- newh=height;
-
- if (flag)
- sb->w->show();
- else
- sb->w->hide();
- gui_mch_update();
- vmw->lock();
- vmw->resize(neww,newh);
- vmw->unlock();
- gui_mch_update();
+ if (abs(vmw->width() - width) > 5
+ && (sb->type == SBAR_LEFT || sb->type == SBAR_RIGHT))
+ neww = width;
+ if (abs(vmw->height() - height) > 5 && (sb->type == SBAR_BOTTOM))
+ newh = height;
+
+ if (flag)
+ sb->w->show();
+ else
+ sb->w->hide();
+ gui_mch_update();
+ vmw->lock();
+ vmw->resize(neww, newh);
+ vmw->unlock();
+ gui_mch_update();
}//}}}
/*
* Return the RGB value of a pixel as "#RRGGBB".
*/
- long_u
+ long_u
gui_mch_get_rgb(guicolor_T pixel)//{{{
{
-// QColor c(pixel,pixel);
-// return (c.red() << 16) + ((c.green() << 8)) + (c.blue());
- return pixel; // funny no ? it looks like with Qt we can always use directly the rgb value (i hope i don't break colors again ;p)
+ // QColor c(pixel, pixel);
+ // return (c.red() << 16) + ((c.green() << 8)) + (c.blue());
+ return pixel;
+ // funny no ? it looks like with Qt we can always use directly the rgb
+ // value (i hope i don't break colors again ;p)
}//}}}
/*
* Get current y mouse coordinate in text window.
* Return -1 when unknown.
*/
- int
+ int
gui_mch_get_mouse_x(void)//{{{
{
- return vmw->mapFromGlobal( QCursor::pos() ).x();
+ return vmw->mapFromGlobal(QCursor::pos()).x();
}//}}}
- int
+ int
gui_mch_get_mouse_y(void)//{{{
{
- return vmw->mapFromGlobal( QCursor::pos() ).y();
+ return vmw->mapFromGlobal(QCursor::pos()).y();
}//}}}
- void
+ void
gui_mch_setmouse(int x, int y)//{{{
{
- QCursor::setPos( vmw->mapToGlobal( QPoint(x,y)) );
+ QCursor::setPos(vmw->mapToGlobal(QPoint(x, y)));
}//}}}
#if defined(FEAT_MOUSESHAPE) || defined(PROTO)
Qt::SplitHCursor, /* udsizing */
Qt::SizeHorCursor, /* leftright */
Qt::SizeHorCursor, /* lrsizing */
- Qt::WaitCursor, /* busy */
- Qt::ForbiddenCursor, /* no */
+ Qt::WaitCursor, /* busy */
+ Qt::ForbiddenCursor, /* no */
Qt::CrossCursor, /* crosshair */
- Qt::PointingHandCursor, /* hand1 */
- Qt::PointingHandCursor, /* hand2 */
+ Qt::PointingHandCursor, /* hand1 */
+ Qt::PointingHandCursor, /* hand2 */
Qt::ArrowCursor, /* pencil */
- Qt::WhatsThisCursor, /* question */
+ Qt::WhatsThisCursor, /* question */
Qt::ArrowCursor, /* right-arrow */
Qt::UpArrowCursor, /* up-arrow */
- Qt::ArrowCursor /* last one */
+ Qt::ArrowCursor /* last one */
};//}}}
#else
static int mshape_ids[] = {//{{{
SplitHCursor, /* udsizing */
SizeHorCursor, /* leftright */
SizeHorCursor, /* lrsizing */
- WaitCursor, /* busy */
- ForbiddenCursor, /* no */
+ WaitCursor, /* busy */
+ ForbiddenCursor, /* no */
CrossCursor, /* crosshair */
- PointingHandCursor, /* hand1 */
- PointingHandCursor, /* hand2 */
+ PointingHandCursor, /* hand1 */
+ PointingHandCursor, /* hand2 */
ArrowCursor, /* pencil */
ArrowCursor, /* question */
ArrowCursor, /* right-arrow */
UpArrowCursor, /* up-arrow */
- ArrowCursor /* last one */
+ ArrowCursor /* last one */
};//}}}
#endif
- void
+ void
mch_set_mouse_shape (int shape)//{{{
{
- int id;
+ int id;
- if (shape == MSHAPE_HIDE || gui.pointer_hidden)
+ if (shape == MSHAPE_HIDE || gui.pointer_hidden)
#if QT_VERSION>=300
- gui.w->setCursor(Qt::BlankCursor);
+ gui.w->setCursor(Qt::BlankCursor);
#else
- gui.w->setCursor(BlankCursor);
+ gui.w->setCursor(BlankCursor);
#endif
- else
+ else
+ {
+ if (shape >= MSHAPE_NUMBERED)
{
- if (shape >= MSHAPE_NUMBERED)
- {
- id = shape - MSHAPE_NUMBERED;
- /* if (id >= GDK_NUM_GLYPHS)
- id = GDK_LEFT_PTR;
- else
- id &= ~1;*/ /* they are always even (why?) */
- id &= -1;
- }
- else
- id = mshape_ids[shape];
-
- gui.w->setCursor(id);
+ id = shape - MSHAPE_NUMBERED;
+ /* if (id >= GDK_NUM_GLYPHS)
+ id = GDK_LEFT_PTR;
+ else
+ id &= ~1;*/ /* they are always even (why?) */
+ id &= -1;
}
- if (shape != MSHAPE_HIDE)
- last_shape = shape;
+ else
+ id = mshape_ids[shape];
+
+ gui.w->setCursor(id);
+ }
+ if (shape != MSHAPE_HIDE)
+ last_shape = shape;
}//}}}
#endif
- int
+ int
gui_mch_adjust_charsize ()//{{{
{
- QFont f(*(gui.current_font));
- QFontMetrics fm (f);
- gui.char_height = fm.height() + p_linespace;
- //gui.char_height = fm.ascent() + fm.descent() + p_linespace;
- gui.char_ascent = fm.ascent() + p_linespace/2;
+ QFont f(*(gui.current_font));
+ QFontMetrics fm(f);
+ gui.char_height = fm.height() + p_linespace;
+ //gui.char_height = fm.ascent() + fm.descent() + p_linespace;
+ gui.char_ascent = fm.ascent() + p_linespace / 2;
- return OK;
+ return OK;
}//}}}
- void
+ void
gui_mch_set_foreground ()//{{{
{
- KWin::setActiveWindow(vmw->winId());
+ KWin::setActiveWindow(vmw->winId());
}//}}}
-
-
-
}
}
+#ifndef FEAT_GUI_KDE
/*ARGSUSED*/
void
im_set_position(row, col)
{
xim_set_preedit();
}
+#endif
/*
* Set the XIM to the current cursor position.
#endif
}
-#if defined(FEAT_GUI_X11) || defined(FEAT_GUI_GTK)
+#if defined(FEAT_GUI_X11) || defined(FEAT_GUI_GTK) || defined(FEAT_GUI_KDE)
static char e_xim[] = N_("E285: Failed to create input context");
#endif
if (xim_input_style & (int)GDK_IM_STATUS_AREA)
return gui.char_height;
#elif defined FEAT_GUI_KDE
-#warning FIXME
+ /* always return zero? */
#else
if (status_area_enabled)
return gui.char_height;
# ifdef FEAT_GUI_GTK
if (xim_input_style & (int)GDK_IM_PREEDIT_CALLBACKS)
return xim_can_preediting;
+# endif
+# ifdef FEAT_GUI_KDE
+ if (preedit_start_col != MAXCOL)
+ return TRUE;
# endif
return xim_has_focus;
}
Display *dpy;
XErrorEvent *error_event;
{
- /* KDE sometimes produces X error that we want to ignore */
-#if defined(FEAT_GUI_KDE)
XGetErrorText(dpy, error_event->error_code, (char *)IObuff, IOSIZE);
- STRCAT(IObuff, "\nVim: Got X error but we continue...\n");
- fprintf(stderr, IObuff);
+#if defined(FEAT_GUI_KDE)
+ /* KDE sometimes produces X error that we want to ignore */
+ STRCAT(IObuff, _("\nVim: Got X error but we continue...\n"));
+ mch_errmsg((char *)IObuff);
return 0;
#else
- XGetErrorText(dpy, error_event->error_code, (char *)IObuff, IOSIZE);
STRCAT(IObuff, _("\nVim: Got X error\n"));
/* We cannot print a message and continue, because no X calls are allowed
void free_buf_options __ARGS((buf_T *buf, int free_p_ff));
int buflist_getfile __ARGS((int n, linenr_T lnum, int options, int forceit));
void buflist_getfpos __ARGS((void));
+buf_T *buflist_findname_exp __ARGS((char_u *fname));
buf_T *buflist_findname __ARGS((char_u *ffname));
int buflist_findpat __ARGS((char_u *pattern, char_u *pattern_end, int unlisted, int diffmode));
int ExpandBufnames __ARGS((char_u *pat, int *num_file, char_u ***file, int options));
linenr_T buflist_findlnum __ARGS((buf_T *buf));
void buflist_list __ARGS((exarg_T *eap));
int buflist_name_nr __ARGS((int fnum, char_u **fname, linenr_T *lnum));
-int setfname __ARGS((buf_T *buf, char_u *ffname, char_u *sfname, int message));
+int setfname __ARGS((buf_T *buf, char_u *ffname, char_u *sfname, int exist_msg));
void buf_set_name __ARGS((int fnum, char_u *name));
void buf_name_changed __ARGS((buf_T *buf));
buf_T *setaltfname __ARGS((char_u *ffname, char_u *sfname, linenr_T lnum));
GuiFontset gui_mch_get_fontset __ARGS((char_u *name, int report_error, int fixed_width));
int gui_mch_init_font __ARGS((char_u *font_name, int fontset));
GuiFont gui_mch_get_font __ARGS((char_u *name, int report_error));
+char_u *gui_mch_get_fontname __ARGS((GuiFont font, char_u *name));
void gui_mch_set_font __ARGS((GuiFont font));
void gui_mch_set_fontset __ARGS((GuiFontset fontset));
void gui_mch_free_font __ARGS((GuiFont font));
static void qf_fill_buffer __ARGS((void));
#endif
static char_u *get_mef_name __ARGS((void));
+static buf_T *load_dummy_buffer __ARGS((char_u *fname));
+static void wipe_dummy_buffer __ARGS((buf_T *buf));
+static void unload_dummy_buffer __ARGS((buf_T *buf));
/*
* Read the errorfile "efile" into memory, line by line, building the error
* Return TRUE when using ":vimgrep" for ":grep".
*/
int
-grep_internal(eap)
- exarg_T *eap;
+grep_internal(cmdidx)
+ cmdidx_T cmdidx;
{
- return ((eap->cmdidx == CMD_grep || eap->cmdidx == CMD_grepadd)
+ return ((cmdidx == CMD_grep || cmdidx == CMD_grepadd)
&& STRCMP("internal",
*curbuf->b_p_gp == NUL ? p_gp : curbuf->b_p_gp) == 0);
}
unsigned len;
/* Redirect ":grep" to ":vimgrep" if 'grepprg' is "internal". */
- if (grep_internal(eap))
+ if (grep_internal(eap->cmdidx))
{
ex_vimgrep(eap);
return;
ex_vimgrep(eap)
exarg_T *eap;
{
- regmatch_T regmatch;
+ regmmatch_T regmatch;
char_u *save_cpo;
int fcount;
char_u **fnames;
+ char_u *s;
char_u *p;
int i;
- FILE *fd;
int fi;
struct qf_line *prevp = NULL;
long lnum;
garray_T ga;
+ buf_T *buf;
+ int duplicate_name = FALSE;
+ int using_dummy;
+ int found_match;
+ int first_match = TRUE;
/* Make 'cpoptions' empty, the 'l' flag should not be used here. */
save_cpo = p_cpo;
p_cpo = empty_option;
- /* Get the search pattern */
+ /* Get the search pattern: either white-separated or enclosed in // */
regmatch.regprog = NULL;
- p = skip_regexp(eap->arg + 1, *eap->arg, TRUE, NULL);
- if (*p != *eap->arg)
+ if (vim_isIDc(*eap->arg))
{
- EMSG(_("E682: Invalid search pattern or delimiter"));
- goto theend;
+ s = eap->arg;
+ p = skiptowhite(s);
+ }
+ else
+ {
+ s = eap->arg + 1;
+ p = skip_regexp(s, *eap->arg, TRUE, NULL);
+ if (*p != *eap->arg)
+ {
+ EMSG(_("E682: Invalid search pattern or delimiter"));
+ goto theend;
+ }
}
- *p++ = NUL;
- regmatch.regprog = vim_regcomp(eap->arg + 1, RE_MAGIC);
+ if (*p != NUL)
+ *p++ = NUL;
+ regmatch.regprog = vim_regcomp(s, RE_MAGIC);
if (regmatch.regprog == NULL)
goto theend;
- regmatch.rm_ic = FALSE;
+ regmatch.rmm_ic = FALSE;
p = skipwhite(p);
if (*p == NUL)
for (fi = 0; fi < fcount && !got_int; ++fi)
{
- fd = fopen((char *)fnames[fi], "r");
- if (fd == NULL)
+ buf = buflist_findname_exp(fnames[fi]);
+ if (buf == NULL || buf->b_ml.ml_mfp == NULL)
+ {
+ /* Remember that a buffer with this name already exists. */
+ duplicate_name = (buf != NULL);
+
+ /* Load file into a buffer, so that 'fileencoding' is detected,
+ * autocommands applied, etc. */
+ buf = load_dummy_buffer(fnames[fi]);
+ using_dummy = TRUE;
+ }
+ else
+ /* Use existing, loaded buffer. */
+ using_dummy = FALSE;
+ if (buf == NULL)
smsg((char_u *)_("Cannot open file \"%s\""), fnames[fi]);
else
{
- lnum = 1;
- while (!vim_fgets(IObuff, IOSIZE, fd) && !got_int)
+ found_match = FALSE;
+ for (lnum = 1; lnum <= buf->b_ml.ml_line_count; ++lnum)
{
- if (vim_regexec(®match, IObuff, (colnr_T)0))
+ if (vim_regexec_multi(®match, curwin, buf, lnum,
+ (colnr_T)0) > 0)
{
- int l = STRLEN(IObuff);
-
- /* remove trailing CR, LF, spaces, etc. */
- while (l > 0 && IObuff[l - 1] <= ' ')
- IObuff[--l] = NUL;
-
if (qf_add_entry(&prevp,
NULL, /* dir */
fnames[fi],
- IObuff,
- lnum,
- (int)(regmatch.startp[0] - IObuff) + 1,/* col */
+ ml_get_buf(buf,
+ regmatch.startpos[0].lnum + lnum, FALSE),
+ regmatch.startpos[0].lnum + lnum,
+ regmatch.startpos[0].col + 1,
FALSE, /* virt_col */
0, /* nr */
0, /* type */
got_int = TRUE;
break;
}
+ else
+ found_match = TRUE;
}
- ++lnum;
line_breakcheck();
+ if (got_int)
+ break;
+ }
+
+ if (using_dummy)
+ {
+ if (duplicate_name)
+ /* Never keep a dummy buffer if there is another buffer
+ * with the same name. */
+ wipe_dummy_buffer(buf);
+ else if (!buf_hide(buf))
+ {
+ /* When not hiding the buffer and no match was found we
+ * don't need to remember the buffer, wipe it out. If
+ * there was a match and it wasn't the first one: only
+ * unload the buffer. */
+ if (!found_match)
+ wipe_dummy_buffer(buf);
+ else if (!first_match)
+ unload_dummy_buffer(buf);
+ }
}
- fclose(fd);
+ if (found_match)
+ first_match = FALSE;
}
}
/* Jump to first match. */
if (qf_lists[qf_curlist].qf_count > 0)
qf_jump(0, 0, FALSE);
+ else
+ EMSG2(_(e_nomatch2), s);
theend:
vim_free(regmatch.regprog);
free_string_option(save_cpo);
}
+/*
+ * Load file "fname" into a dummy buffer and return the buffer pointer.
+ * Returns NULL if it fails.
+ * Must call unload_dummy_buffer() or wipe_dummy_buffer() later!
+ */
+ static buf_T *
+load_dummy_buffer(fname)
+ char_u *fname;
+{
+ buf_T *newbuf;
+ int failed = TRUE;
+#ifdef FEAT_AUTOCMD
+ aco_save_T aco;
+#else
+ buf_T *old_curbuf = curbuf;
+#endif
+
+ /* Allocate a buffer without putting it in the buffer list. */
+ newbuf = buflist_new(NULL, NULL, (linenr_T)1, BLN_DUMMY);
+ if (newbuf == NULL)
+ return NULL;
+
+#ifdef FEAT_AUTOCMD
+ /* set curwin/curbuf to buf and save a few things */
+ aucmd_prepbuf(&aco, newbuf);
+#else
+ curbuf = newbuf;
+ curwin->w_buffer = newbuf;
+#endif
+
+ /* Need to set the filename for autocommands. */
+ (void)setfname(curbuf, fname, NULL, FALSE);
+
+ if (ml_open() == OK)
+ {
+ /* Create swap file now to avoid the ATTENTION message. */
+ check_need_swap(TRUE);
+
+ /* Remove the "dummy" flag, otherwise autocommands may not
+ * work. */
+ curbuf->b_flags &= ~BF_DUMMY;
+
+ if (readfile(fname, NULL,
+ (linenr_T)0, (linenr_T)0, (linenr_T)MAXLNUM,
+ NULL, READ_NEW | READ_DUMMY) == OK
+ && !(curbuf->b_flags & BF_NEW))
+ {
+ failed = FALSE;
+ if (curbuf != newbuf)
+ {
+ /* Bloody autocommands changed the buffer! */
+ if (buf_valid(newbuf))
+ wipe_buffer(newbuf, FALSE);
+ newbuf = curbuf;
+ }
+ }
+ }
+
+#ifdef FEAT_AUTOCMD
+ /* restore curwin/curbuf and a few other things */
+ aucmd_restbuf(&aco);
+#else
+ curbuf = old_curbuf;
+ curwin->w_buffer = old_curbuf;
+#endif
+
+ if (!buf_valid(newbuf))
+ return NULL;
+ if (failed)
+ {
+ wipe_dummy_buffer(newbuf);
+ return NULL;
+ }
+ return newbuf;
+}
+
+/*
+ * Wipe out the dummy buffer that load_dummy_buffer() created.
+ */
+ static void
+wipe_dummy_buffer(buf)
+ buf_T *buf;
+{
+ if (curbuf != buf) /* safety check */
+ wipe_buffer(buf, FALSE);
+}
+
+/*
+ * Unload the dummy buffer that load_dummy_buffer() created.
+ */
+ static void
+unload_dummy_buffer(buf)
+ buf_T *buf;
+{
+ if (curbuf != buf) /* safety check */
+ close_buffer(NULL, buf, DOBUF_UNLOAD);
+}
+
/*
* ":[range]cbuffer [bufnr]" command.
*/
fnames[fi],
IObuff,
lnum,
- 0, /* col */
+ (int)(regmatch.startp[0] - IObuff)
+ + 1, /* col */
FALSE, /* virt_col */
0, /* nr */
1, /* type */
&& (search_attr == 0 || char_attr != search_attr))
char_attr = extra_attr;
-#if defined(FEAT_XIM) && (defined(FEAT_GUI_GTK) || defined(FEAT_GUI_KDE))
+#if defined(FEAT_XIM) && defined(FEAT_GUI_GTK)
/* XIM don't send preedit_start and preedit_end, but they send
* preedit_changed and commit. Thus Vim can't set "im_is_active", use
* im_is_preediting() here. */
#endif
)
++s;
- len += ptr2cells(s++);
+ len += ptr2cells(s);
mb_ptr_adv(s);
}
#define VIM_VERSION_NODOT "vim70aa"
#define VIM_VERSION_SHORT "7.0aa"
#define VIM_VERSION_MEDIUM "7.0aa ALPHA"
-#define VIM_VERSION_LONG "VIM - Vi IMproved 7.0aa ALPHA (2004 Dec 24)"
-#define VIM_VERSION_LONG_DATE "VIM - Vi IMproved 7.0aa ALPHA (2004 Dec 24, compiled "
+#define VIM_VERSION_LONG "VIM - Vi IMproved 7.0aa ALPHA (2004 Dec 29)"
+#define VIM_VERSION_LONG_DATE "VIM - Vi IMproved 7.0aa ALPHA (2004 Dec 29, compiled "
#define BF_NEW 0x10 /* file didn't exist when editing started */
#define BF_NEW_W 0x20 /* Warned for BF_NEW and file created */
#define BF_READERR 0x40 /* got errors while reading the file */
+#define BF_DUMMY 0x80 /* dummy buffer, only used internally */
/* Mask to check for flags that prevent normal writing */
#define BF_WRITE_MASK (BF_NOTEDITED + BF_NEW + BF_READERR)
projects / vim / commitdiff