Extension Modules
-----------------
-- Issue #29169: Update zlib to 1.2.10.
+- Issue #29169: Update zlib to 1.2.11.
Library
-------
ZLIB DATA COMPRESSION LIBRARY
-zlib 1.2.10 is a general purpose data compression library. All the code is
+zlib 1.2.11 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
issue of Dr. Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .
-The changes made in version 1.2.10 are documented in the file ChangeLog.
+The changes made in version 1.2.11 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory contrib/ .
#include "deflate.h"
const char deflate_copyright[] =
- " deflate 1.2.10 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
+ " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
}
func = configuration_table[s->level].func;
- if ((strategy != s->strategy || func != configuration_table[level].func)) {
+ if ((strategy != s->strategy || func != configuration_table[level].func) &&
+ s->high_water) {
/* Flush the last buffer: */
int err = deflate(strm, Z_BLOCK);
if (err == Z_STREAM_ERROR)
len = left + s->strm->avail_in; /* limit len to the input */
if (len > have)
len = have; /* limit len to the output */
- if (left > len)
- left = len; /* limit window pull to len */
/* If the stored block would be less than min_block in length, or if
* unable to copy all of the available input when flushing, then try
*/
if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
flush == Z_NO_FLUSH ||
- len - left != s->strm->avail_in))
+ len != left + s->strm->avail_in))
break;
/* Make a dummy stored block in pending to get the header bytes,
* including any pending bits. This also updates the debugging counts.
*/
- last = flush == Z_FINISH && len - left == s->strm->avail_in ? 1 : 0;
+ last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
_tr_stored_block(s, (char *)0, 0L, last);
/* Replace the lengths in the dummy stored block with len. */
/* Write the stored block header bytes. */
flush_pending(s->strm);
- /* Update debugging counts for the data about to be copied. */
#ifdef ZLIB_DEBUG
+ /* Update debugging counts for the data about to be copied. */
s->compressed_len += len << 3;
s->bits_sent += len << 3;
#endif
/* Copy uncompressed bytes from the window to next_out. */
if (left) {
+ if (left > len)
+ left = len;
zmemcpy(s->strm->next_out, s->window + s->block_start, left);
s->strm->next_out += left;
s->strm->avail_out -= left;
s->block_start = s->strstart;
s->insert += MIN(used, s->w_size - s->insert);
}
+ if (s->high_water < s->strstart)
+ s->high_water = s->strstart;
/* If the last block was written to next_out, then done. */
if (last)
read_buf(s->strm, s->window + s->strstart, have);
s->strstart += have;
}
+ if (s->high_water < s->strstart)
+ s->high_water = s->strstart;
/* There was not enough avail_out to write a complete worthy or flushed
* stored block to next_out. Write a stored block to pending instead, if we
/* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010, 2013, 2016 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
#define MAXBITS 15
const char inflate_copyright[] =
- " inflate 1.2.10 Copyright 1995-2017 Mark Adler ";
+ " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
- 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 192, 202};
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
* detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* ===========================================================================
* Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
+ * trees or store, and write out the encoded block.
*/
void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
deflate_state *s;
-.TH ZLIB 3 "2 Jan 2017"
+.TH ZLIB 3 "15 Jan 2017"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS AND LICENSE
-Version 1.2.10
+Version 1.2.11
.LP
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
.LP
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.10, January 2nd, 2017
+ version 1.2.11, January 15th, 2017
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.10"
-#define ZLIB_VERNUM 0x12a0
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 10
+#define ZLIB_VER_REVISION 11
#define ZLIB_VER_SUBREVISION 0
/*
used to switch between compression and straight copy of the input data, or
to switch to a different kind of input data requiring a different strategy.
If the compression approach (which is a function of the level) or the
- strategy is changed, then the input available so far is compressed with the
- old level and strategy using deflate(strm, Z_BLOCK). There are three
- approaches for the compression levels 0, 1..3, and 4..9 respectively. The
- new level and strategy will take effect at the next call of deflate().
+ strategy is changed, and if any input has been consumed in a previous
+ deflate() call, then the input available so far is compressed with the old
+ level and strategy using deflate(strm, Z_BLOCK). There are three approaches
+ for the compression levels 0, 1..3, and 4..9 respectively. The new level
+ and strategy will take effect at the next call of deflate().
If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
not have enough output space to complete, then the parameter change will not
/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011, 2012, 2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
projects / python / commitdiff