-*change.txt* For Vim version 7.4. Last change: 2013 Jul 17
+*change.txt* For Vim version 7.4. Last change: 2013 Aug 25
VIM REFERENCE MANUAL by Bram Moolenaar
made for the delete operator with these movement commands: |%|, |(|, |)|, |`|,
|/|, |?|, |n|, |N|, |{| and |}|. Register "1 is always used then (this is Vi
compatible). The "- register is used as well if the delete is within a line.
+Note that these character may be mapped. E.g. |%| is mapped by the matchit
+plugin.
With each successive deletion or change, Vim shifts the previous contents
of register 1 into register 2, 2 into 3, and so forth, losing the previous
contents of register 9.
-*eval.txt* For Vim version 7.4. Last change: 2013 Aug 03
+*eval.txt* For Vim version 7.4. Last change: 2013 Aug 24
VIM REFERENCE MANUAL by Bram Moolenaar
:echo Fn()
< *E704* *E705* *E707*
A Funcref variable must start with a capital, "s:", "w:", "t:" or "b:". You
+can use "g:" but the following name must still start with a capital. You
cannot have both a Funcref variable and a function with the same name.
A special case is defining a function and directly assigning its Funcref to a
< Note that it's possible for patch 147 to be omitted even though 148 is
included.
+acl Compiled with |ACL| support.
all_builtin_terms Compiled with all builtin terminals enabled.
amiga Amiga version of Vim.
arabic Compiled with Arabic support |Arabic|.
writebackup Compiled with 'writebackup' default on.
xfontset Compiled with X fontset support |xfontset|.
xim Compiled with X input method support |xim|.
-xpm_w32 Compiled with pixmap support for Win32.
+xpm Compiled with pixmap support.
+xpm_w32 Compiled with pixmap support for Win32. (Only for
+ backward compatibility. Use "xpm" instead.)
xsmp Compiled with X session management support.
xsmp_interact Compiled with interactive X session management support.
xterm_clipboard Compiled with support for xterm clipboard.
-*if_lua.txt* For Vim version 7.4. Last change: 2012 Jun 29
+*if_lua.txt* For Vim version 7.4. Last change: 2013 Sep 04
VIM REFERENCE MANUAL by Luis Carvalho
<
vim.funcref({name}) Returns a Funcref to function {name} (see
|Funcref|). It is equivalent to Vim's
- "function".
+ "function". NOT IMPLEMENTED YET
vim.buffer([arg]) If "arg" is a number, returns buffer with
number "arg" in the buffer list or, if "arg"
-*map.txt* For Vim version 7.4. Last change: 2013 Aug 03
+*map.txt* For Vim version 7.4. Last change: 2013 Aug 22
VIM REFERENCE MANUAL by Bram Moolenaar
The simplest way to load a set of related language mappings is by using the
'keymap' option. See |45.5|.
In Insert mode and in Command-line mode the mappings can be disabled with
-the CTRL-^ command |i_CTRL-^| |c_CTRL-^| These commands change the value of
+the CTRL-^ command |i_CTRL-^| |c_CTRL-^|. These commands change the value of
the 'iminsert' option. When starting to enter a normal command line (not a
search pattern) the mappings are disabled until a CTRL-^ is typed. The state
last used is remembered for Insert mode and Search patterns separately. The
In the cases of the -count and -register attributes, if the optional argument
is supplied, it is removed from the argument list and is available to the
replacement text separately.
+Note that these arguments can be abbreviated, but that is a deprecated
+feature. Use the full name for new scripts.
Replacement text
-*options.txt* For Vim version 7.4. Last change: 2013 Jul 09
+*options.txt* For Vim version 7.4. Last change: 2013 Aug 22
VIM REFERENCE MANUAL by Bram Moolenaar
global
{not in Vi}
A sequence of single character flags. When a character is present
- this indicates vi-compatible behavior. This is used for things where
- not being vi-compatible is mostly or sometimes preferred.
+ this indicates Vi-compatible behavior. This is used for things where
+ not being Vi-compatible is mostly or sometimes preferred.
'cpoptions' stands for "compatible-options".
Commas can be added for readability.
To avoid problems with flags that are added in the future, use the
-*os_vms.txt* For Vim version 7.4. Last change: 2011 Aug 14
+*os_vms.txt* For Vim version 7.4. Last change: 2013 Aug 22
VIM REFERENCE MANUAL
1. Getting started *vms-started*
-Vim (Vi IMproved) is a vi-compatible text editor that runs on nearly every
+Vim (Vi IMproved) is a Vi-compatible text editor that runs on nearly every
operating system known to humanity. Now use Vim on OpenVMS too, in character
or X/Motif environment. It is fully featured and absolutely compatible with
Vim on other operating systems.
-*syntax.txt* For Vim version 7.4. Last change: 2013 Jul 05
+*syntax.txt* For Vim version 7.4. Last change: 2013 Aug 22
VIM REFERENCE MANUAL by Bram Moolenaar
embedded script highlighting they wish to have. >
g:vimsyn_embed == 0 : don't embed any scripts
- g:vimsyn_embed =~ 'm' : embed mzscheme (but only if vim supports it)
- g:vimsyn_embed =~ 'p' : embed perl (but only if vim supports it)
- g:vimsyn_embed =~ 'P' : embed python (but only if vim supports it)
- g:vimsyn_embed =~ 'r' : embed ruby (but only if vim supports it)
- g:vimsyn_embed =~ 't' : embed tcl (but only if vim supports it)
+ g:vimsyn_embed =~ 'm' : support embedded mzscheme
+ g:vimsyn_embed =~ 'p' : support embedded perl
+ g:vimsyn_embed =~ 'P' : support embedded python
+ g:vimsyn_embed =~ 'r' : support embedded ruby
+ g:vimsyn_embed =~ 't' : support embedded tcl
<
-By default, g:vimsyn_embed is "mpPr"; ie. syntax/vim.vim will support
-highlighting mzscheme, perl, python, and ruby by default. Vim's has("tcl")
-test appears to hang vim when tcl is not truly available. Thus, by default,
-tcl is not supported for embedding (but those of you who like tcl embedded in
-their vim syntax highlighting can simply include it in the g:vimembedscript
-option).
+By default, g:vimsyn_embed is a string supporting interpreters that your vim
+itself supports. Concatenate multiple characters to support multiple types
+of embedded interpreters; ie. g:vimsyn_embed= "mp" supports embedded mzscheme
+and embedded perl.
*g:vimsyn_folding*
Some folding is now supported with syntax/vim.vim: >
+GUI_Photon various.txt /*+GUI_Photon*
+GUI_neXtaw various.txt /*+GUI_neXtaw*
+X11 various.txt /*+X11*
++acl various.txt /*+acl*
+arabic various.txt /*+arabic*
+autocmd various.txt /*+autocmd*
+balloon_eval various.txt /*+balloon_eval*
+writebackup various.txt /*+writebackup*
+xfontset various.txt /*+xfontset*
+xim various.txt /*+xim*
++xpm various.txt /*+xpm*
+xpm_w32 various.txt /*+xpm_w32*
+xsmp various.txt /*+xsmp*
+xsmp_interact various.txt /*+xsmp_interact*
-*todo.txt* For Vim version 7.4. Last change: 2013 Aug 10
+*todo.txt* For Vim version 7.4. Last change: 2013 Sep 05
VIM REFERENCE MANUAL by Bram Moolenaar
*known-bugs*
-------------------- Known bugs and current work -----------------------
+NFA engine mismatch, with example. (ZyX, 2013 Aug 29)
+
+php syntax file update. (Jason Woofenden, Aug 30)
+
+Problem positioning the cursor after auto-formatting without a comment. (Tor
+Perkins, 2013 Sep 1)
+
+Popup menu: first item is not selected when typing more than one character?
+
+Patch to add async functionality. (Geoff Greer, 2013 Sep 1)
+
+Patch to avoid mouse cursor flickering. (Ken Takata,, 2013 Sep 2)
+
+Should win_redr_custom() not be allowed to use recursively?
+(Yasuhiro Matsumoto, 2013 Aug 15)
+
+NFA engine combining character mismatch. (glts, 2013 Aug 27)
+Remark Dominique, Aug 27
+
+Issue 164: freeze on regexp search.
+
Python: ":py raw_input('prompt')" doesn't work. (Manu Hack)
-Patch to add "acl" and "xpm" as a feature. (Ken Takata, 2013 Jul 8)
+Patch to fix substitute prompt with line number. (Benoit Pierre, 2013 Aug 27,
+third message)
+
+Patch to avoid problem with colon in file name. (Yasuhiro Matsumoto, 2013 Sep
+5) Only copy file name when needed.
+
+Include systemverilog file? Two votes yes.
+
+Wrapping around end of file does not work for "." after "cgn". (Dimitar
+Dimitrov)
+Patch by Christian Brabandt, 2013 Aug 22
+
+Problem with 'spellsuggest' file, only works for some words.
+(Cesar Romani, 2013 Aug 20) Depends on file name? (Aug 24)
+Additional remark by glts: the suggested words are marked bad?
+
+Syntax highlighting slow (hangs) in SASS file. (Niek Bosch, 2013 Aug 21)
+
+Adding "~" to 'cdpath' doesn't work for completion? (Davido, 2013 Aug 19)
Patch to make has() check for Vim version and patch at the same time.
(Marc Weber, 2013 Jun 7)
Go through more coverity reports.
-"gUgn" cannot be repeated, while "dgn" can.
+With "$" in 'cpoptions' the popup menu isn't fully drawn. (Matti Niemenmaa,
+2013 Sep 5)
+
+"gUgn" cannot be repeated, while "dgn" can. (Dimitar Dimitrov)
+Patch by Christian Brabandt (2013 Aug 12)
Several Win32 functions are not using Unicode.
Patches to fix this. (Ken Takata, 2013 Aug 9)
/[b-a] gives error E16, should probably be E769.
+:help gives example for z?, but it does not work. m? and t? do work.
+
+Patch to add funcref to Lua. (Luis Carvalho, 2013 Sep 4)
+Missing tests.
+
Discussion about canonicalization of Hebrew. (Ron Aaron, 2011 April 10)
Patch to make external commands work with multi-byte characters on Win32 when
Win32: When a directory name contains an exclamation mark, completion doesn't
complete the contents of the directory. No escaping for the "!"? (Jan
-Stocker, 2012 Jan 5)
+Stocker, 2012 Jan 5; 2013 Aug 20)
Patch to support expression argument to sort() instead of a function name.
Yasuhiro Matsumoto, 2013 May 31.
Problem caused by patch 7.3.638: window->open does not update window
correctly. Issue 91.
+8 'backupdir' and 'directory' should use $TMPDIR, $TMP and/or $TEMP when
+ defined.
+Issue 28.
+
Patch to fix that 'cedit' is recognized after :normal. (Christian Brabandt,
2013 Mar 19, later message)
Bug with 'cursorline' in diff mode. Line being scrolled into view gets
highlighted as the cursor line. (Alessandro Ivaldi, 2013 Jun 4)
+Two highlighting bugs. (Zyx, 2013 Aug 18)
+
Patch to add the bufferlist() function. (Yegappan Lakshmanan, 2013 May 5)
May 17: with winlist() and tabpagelist().
May 19: with local variables.
Patch from Christian Brabandt to make the "buffer" argument for ":sign place"
optional. (2013 Jul 12)
+Dialog is too big on Linux too. (David Fishburn, 2013 Sep 2)
+
Patch to allow setting w:quickfix_title via setqflist() and setloclist()
functions. (Christian Brabandt, 2013 May 8, update May 21)
Patch to add getlocstack() / setlocstack(). (Christian Brabandt, 2013 May 14)
Patch to make fold updates much faster. (Christian Brabandt, 2012 Dec)
+TCL: With MSVC 2010 doesn't find Tcl_FindExecutable. (tux)
+Patch to define it. (Ken Takata, 2013 Aug 12) Is this right?
+
MS-Windows: Patch to make tests copy files to avoid changing the fileformat of
the files under version control. (Taro Muraoka, 2013 Jul 5)
Patch to add functions for signs. (Christian Brabandt, 2013 Jan 27)
+Do we need some way (option) to show the sign column even when there are no
+signs? Patch by Christian Brabandt, 2013 Aug 22.
+
+Patch to remove flicker from popup menu. (Yasuhiro Matsumoto, 2013 Aug 15)
+
Patch to use directX to draw text on Windows. Adds the 'renderoptions'
option. (Taro Muraoka, 2013 Jan 25, update 2013 Apr 3, May 14)
+Fixes this problem:
+8 Win32: Multi-byte characters are not displayed, even though the same font
+ in Notepad can display them. (Srinath Avadhanula) Try with the
+ UTF-8-demo.txt page with Andale Mono.
Patch to add 'completeselect' option. Specifies how to select a candidate in
insert completion. (Shougo, 2013 May 29)
Patch to list user digraphs. (Christian Brabandt, 2012 Apr 14)
+Patch to add digraph() function. (Christian Brabandt, 2013 Aug 22, update Aug
+24)
+
Patch for input method status. (Hirohito Higashi, 2012 Apr 18)
Patch to use .png icons for the toolbar on MS-Windows. (Martin Gieseking, 2013
Changes to manpage plugin. (Elias Toivanen, 2011 Jul 25)
Patch to make "z=" work when 'spell' is off. Does this have nasty side
-effects? (Christian Brabandt, 2012 Aug 5)
+effects? (Christian Brabandt, 2012 Aug 5, Update 2013 Aug 12)
Would also need to do this for spellbadword() and spellsuggest().
Patch for variable tabstops.
number, but it is in the sign column. Doesn't look right. (ZyX 2011 Jun 5)
Patch by Christian Brabandt, 2011 Jun 5. Introduces new problems.
+Add jump() function. (Marcin Szamotulski, 2013 Aug 29)
+Is this needed? CTRL-O and CTRL-I do the same, just more difficult to use.
+
8 Add a command to jump to the next character highlighted with "Error".
Patch by Christian Brabandt, uses ]e [e ]t and [t. 2011 Aug 9.
getpos()/setpos() don't include curswant. getpos() could return a fifth
element. setpos() could accept an optional fifth element.
-Patch by Christian Brabandt, 2010 Sep 6. Check that new argument is optional
-and that it's documented.
+Patch by Christian Brabandt, 2010 Sep 6. Again 2013 Aug 22.
With "tw=55 fo+=a" typing space before ) doesn't work well. (Scott Mcdermott,
2010 Oct 24)
Patch to add farsi handling to arabic.c (Ali Gholami Rudi, 2009 May 2)
Added test, updates, June 23.
+Updated for 7.4: http://litcave.rudi.ir/farsi_vim.diff
Patch to add "focusonly" to 'scrollopt', so that scrollbind also applies in
window that doesn't have focus. (Jonathon Mah, 2009 Jan 12)
- testdir/Make_dos_sh.mak for running tests with MingW. (Bill Mccarthy, 2008
Sep 13)
- Patch for adding "space" item in 'listchars'. (Jérémie Roquet, 2009 Oct 29,
- Docs patch Oct 30)
+ Docs patch Oct 30, update David Burgin (glts) 2013 Aug 24)
- Replace ccomplete.vim by cppcomplete.vim from www.vim.org? script 1520 by
Vissale Neang. (Martin Stubenschrott) Asked Vissale to make the scripts
more friendly for the Vim distribution.
8 Use another default for 'termencoding': the active codepage. Means that
when 'encoding' is changed typing characters still works properly.
Alternative: use the Unicode functions to obtain typed characters.
-8 Win32: Multi-byte characters are not displayed, even though the same font
- in Notepad can display them. (Srinath Avadhanula) Try with the
- UTF-8-demo.txt page with Andale Mono.
7 The cursor color indicating IME mode doesn't work properly. (Shizhu Pan,
2004 May 9)
8 Win32: When clicking on the gvim title bar, which gives it focus, produces
character. (Yasuhiro Matsumoto) It should return 1 when used on a tail
byte, like for utf-8. Store second byte of double-byte in ScreenLines2[]
(like for DBCS_JPNU) and put a zero in the second byte (like for UTF-8).
-8 'backupdir' and 'directory' should use $TMPDIR, $TMP and/or $TEMP when
- defined.
7 Inside a function with "perl <<EOF" a line with "$i++" is recognized as an
":insert" command, causing the following "endfunction" not to be found.
Add skipping this perl construction inside function definitions.
-*undo.txt* For Vim version 7.4. Last change: 2012 Mar 04
+*undo.txt* For Vim version 7.4. Last change: 2013 Aug 22
VIM REFERENCE MANUAL by Bram Moolenaar
2. Two ways of undo *undo-two-ways*
How undo and redo commands work depends on the 'u' flag in 'cpoptions'.
-There is the Vim way ('u' excluded) and the vi-compatible way ('u' included).
+There is the Vim way ('u' excluded) and the Vi-compatible way ('u' included).
In the Vim way, "uu" undoes two changes. In the Vi-compatible way, "uu" does
nothing (undoes an undo).
in the normal, big and huge versions of Vim.
*+feature-list*
+ *+acl* |ACL| support included
*+ARP* Amiga only: ARP support included
B *+arabic* |Arabic| language support
N *+autocmd* |:autocmd|, automatic commands
m *+writebackup* |'writebackup'| is default on
m *+xim* X input method |xim|
*+xfontset* X fontset support |xfontset|
+ *+xpm* pixmap support
m *+xpm_w32* Win32 GUI only: pixmap support |w32-xpm-support|
*+xsmp* XSMP (X session management) support
*+xsmp_interact* interactive XSMP (X session management) support
-*version7.txt* For Vim version 7.4. Last change: 2013 Aug 10
+*version7.txt* For Vim version 7.4. Last change: 2013 Sep 03
VIM REFERENCE MANUAL by Bram Moolenaar
Added special |expand()| argument that expands to the current line
number.
- Made it possible to force |char2nr()| always give unicode codepoints
+ Made it possible to force |char2nr()| to always give unicode codepoints
regardless of current encoding. (Yasuhiro Matsumoto)
Made it possible for functions generating file list generate |List|
-*vi_diff.txt* For Vim version 7.4. Last change: 2012 Aug 08
+*vi_diff.txt* For Vim version 7.4. Last change: 2013 Aug 22
VIM REFERENCE MANUAL by Bram Moolenaar
Multi level undo. |undo|
'u' goes backward in time, 'CTRL-R' goes forward again. Set option
'undolevels' to the number of changes to be remembered (default 1000).
- Set 'undolevels' to 0 for a vi-compatible one level undo. Set it to
+ Set 'undolevels' to 0 for a Vi-compatible one level undo. Set it to
-1 for no undo at all.
When all changes in a buffer have been undone, the buffer is not
considered changed anymore. You can exit it with :q, without <!>.
" Vim syntax file
" Language: Vim help file
" Maintainer: Bram Moolenaar (Bram@vim.org)
-" Last Change: 2013 Jul 07
+" Last Change: 2013 Sep 05
" Quit when a (custom) syntax file was already loaded
if exists("b:current_syntax")
syn match helpVim "VIM REFERENCE.*"
syn match helpOption "'[a-z]\{2,\}'"
syn match helpOption "'t_..'"
-syn match helpCommand "`[^` ]\+`"hs=s+1,he=e-1 contains=helpBacktick
+syn match helpCommand "`[^` \t]\+`"hs=s+1,he=e-1 contains=helpBacktick
syn match helpHeader "\s*\zs.\{-}\ze\s\=\~$" nextgroup=helpIgnore
syn match helpGraphic ".* \ze`$" nextgroup=helpIgnore
if has("conceal")
" Language: Mail file
" Previous Maintainer: Felix von Leitner <leitner@math.fu-berlin.de>
" Maintainer: GI <a@b.c>, where a='gi1242+vim', b='gmail', c='com'
-" Last Change: Thu 02 Feb 2012 08:47:04 PM EST
+" Last Change: Wed 14 Aug 2013 08:24:52 AM PDT
" Quit when a syntax file was already loaded
if exists("b:current_syntax")
" Treat verbatim Text special.
syn region mailVerbatim contains=@NoSpell keepend start="^#v+$" end="^#v-$" fold
-syn region mailVerbatim contains=@mailQuoteExps,@NoSpell start="^\z(\(> \?\)\+\)#v+$" end="\z1#v-$" fold
+syn region mailVerbatim contains=@mailQuoteExps,@NoSpell keepend start="^\z(\(> \?\)\+\)#v+$" end="\z1#v-$" fold
" URLs start with a known protocol or www,web,w3.
syn match mailURL contains=@NoSpell `\v<(((https?|ftp|gopher)://|(mailto|file|news):)[^' <>"]+|(www|web|w3)[a-z0-9_-]*\.[a-z0-9._-]+\.[^' <>"]+)[a-z0-9/]`
" Vim syntax file
" Language: php PHP 3/4/5
" Maintainer: Jason Woofenden <jason@jasonwoof.com>
-" Last Change: Dec 11, 2012
+" Last Change: Aug 28, 2013
" URL: https://gitorious.org/jasonwoof/vim-syntax/blobs/master/php.vim
" Former Maintainers: Peter Hodge <toomuchphp-vim@yahoo.com>
" Debian VIM Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>
exec "syn sync fromstart"
endif
+syntax match phpDocCustomTags "@[a-zA-Z]*\(\s\+\|\n\|\r\)" containedin=phpComment
+syntax region phpDocTags start="{@\(example\|id\|internal\|inheritdoc\|link\|source\|toc\|tutorial\)" end="}" containedin=phpComment
+syntax match phpDocTags "@\(abstract\|access\|author\|category\|copyright\|deprecated\|example\|final\|global\|ignore\|internal\|license\|link\|method\|name\|package\|param\|property\|return\|see\|since\|static\|staticvar\|subpackage\|tutorial\|uses\|var\|version\|contributor\|modified\|filename\|description\|filesource\|throws\)\(\s\+\)\?" containedin=phpComment
+syntax match phpDocTodo "@\(todo\|fixme\|xxx\)\(\s\+\)\?" containedin=phpComment
+
" Define the default highlighting.
" For version 5.7 and earlier: only when not done already
" For version 5.8 and later: only when an item doesn't have highlighting yet
HiLink phpConstant Constant
HiLink phpCoreConstant Constant
HiLink phpComment Comment
+ HiLink phpDocTags PreProc
+ HiLink phpDocCustomTags Type
HiLink phpException Exception
HiLink phpBoolean Boolean
HiLink phpStorageClass StorageClass
HiLink phpInterpSimpleCurly Delimiter
HiLink phpInterpVarname Identifier
HiLink phpTodo Todo
+ HiLink phpDocTodo Todo
HiLink phpMemberSelector Structure
if exists("php_oldStyle")
hi phpIntVar guifg=Red ctermfg=DarkRed
" Vim syntax file
-" Language: Vim 7.3 script
-" Maintainer: Dr. Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz>
-" Last Change: Jul 05, 2013
-" Version: 7.3-26
+" Language: Vim 7.4 script
+" Maintainer: Charles E. Campbell <NdrOchipS@PcampbellAfamily.Mbiz>
+" Last Change: Aug 16, 2013
+" Version: 7.4-1
" Automatically generated keyword lists: {{{1
" Quit when a syntax file was already loaded {{{2
" Allows users to specify the type of embedded script highlighting
" they want: (perl/python/ruby/tcl support)
" g:vimsyn_embed == 0 : don't embed any scripts
-" g:vimsyn_embed ~= 'l' : embed lua (but only if vim supports it)
-" g:vimsyn_embed ~= 'm' : embed mzscheme (but only if vim supports it)
-" g:vimsyn_embed ~= 'p' : embed perl (but only if vim supports it)
-" g:vimsyn_embed ~= 'P' : embed python (but only if vim supports it)
-" g:vimsyn_embed ~= 'r' : embed ruby (but only if vim supports it)
-" g:vimsyn_embed ~= 't' : embed tcl (but only if vim supports it)
+" g:vimsyn_embed ~= 'l' : embed lua
+" g:vimsyn_embed ~= 'm' : embed mzscheme
+" g:vimsyn_embed ~= 'p' : embed perl
+" g:vimsyn_embed ~= 'P' : embed python
+" g:vimsyn_embed ~= 'r' : embed ruby
+" g:vimsyn_embed ~= 't' : embed tcl
+if has("win32") || has("win95") || has("win64") || has("win16")
+ " apparently has("tcl") has been hanging vim on some windows systems with cygwin
+ let s:trytcl= (&shell !~ '\<\%(bash\>\|4[nN][tT]\|\<zsh\)\>\%(\.exe\)\=$')
+else
+ let s:trytcl= 1
+endif
if !exists("g:vimsyn_embed")
- let g:vimsyn_embed= "lmpPr"
+ let g:vimsyn_embed= ""
+ if has("lua") |let g:vimsyn_embed= g:vimsyn_embed."l"|endif
+ if has("mzscheme") |let g:vimsyn_embed= g:vimsyn_embed."m"|endif
+ if has("perl") |let g:vimsyn_embed= g:vimsyn_embed."p"|endif
+ if has("python") |let g:vimsyn_embed= g:vimsyn_embed."P"
+ elseif has("python3")|let g:vimsyn_embed= g:vimsyn_embed."P"|endif
+ if has("ruby") |let g:vimsyn_embed= g:vimsyn_embed."r"|endif
+ if s:trytcl
+ if has("tcl") |let g:vimsyn_embed= g:vimsyn_embed."t"|endif
+ endif
endif
+unlet s:trytcl
" [-- lua --] {{{3
let s:luapath= fnameescape(expand("<sfile>:p:h")."/lua.vim")
endif
endfor
endif
-if (g:vimsyn_embed =~ 'l' && has("lua")) && filereadable(s:luapath)
+if (g:vimsyn_embed =~ 'l') && filereadable(s:luapath)
unlet! b:current_syntax
exe "syn include @vimLuaScript ".s:luapath
if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'l'
endif
endfor
endif
-if (g:vimsyn_embed =~ 'p' && has("perl")) && filereadable(s:perlpath)
+if (g:vimsyn_embed =~ 'p') && filereadable(s:perlpath)
unlet! b:current_syntax
exe "syn include @vimPerlScript ".s:perlpath
if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'p'
endif
endfor
endif
-if (g:vimsyn_embed =~ 'r' && has("ruby")) && filereadable(s:rubypath)
+if (g:vimsyn_embed =~ 'r') && filereadable(s:rubypath)
unlet! b:current_syntax
exe "syn include @vimRubyScript ".s:rubypath
if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'r'
endif
endfor
endif
-if g:vimsyn_embed =~ 'P' && (has("python") || has("python3")) && filereadable(s:pythonpath)
+if g:vimsyn_embed =~ 'P' && filereadable(s:pythonpath)
unlet! b:current_syntax
exe "syn include @vimPythonScript ".s:pythonpath
if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 'P'
unlet s:pythonpath
" [-- tcl --] {{{3
-if has("win32") || has("win95") || has("win64") || has("win16")
- " apparently has("tcl") has been hanging vim on some windows systems with cygwin
- let s:trytcl= (&shell !~ '\<\%(bash\>\|4[nN][tT]\|\<zsh\)\>\%(\.exe\)\=$')
-else
- let s:trytcl= 1
-endif
-if s:trytcl
- let s:tclpath= fnameescape(expand("<sfile>:p:h")."/tcl.vim")
- if !filereadable(s:tclpath)
- for s:tclpath in split(globpath(&rtp,"syntax/tcl.vim"),"\n")
- if filereadable(fnameescape(s:tclpath))
- let s:tclpath= fnameescape(s:tclpath)
- break
- endif
- endfor
- endif
- if (g:vimsyn_embed =~ 't' && has("tcl")) && filereadable(s:tclpath)
- unlet! b:current_syntax
- exe "syn include @vimTclScript ".s:tclpath
- if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 't'
- syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript
- syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript
- else
- syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript
- syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript
+let s:tclpath= fnameescape(expand("<sfile>:p:h")."/tcl.vim")
+if !filereadable(s:tclpath)
+ for s:tclpath in split(globpath(&rtp,"syntax/tcl.vim"),"\n")
+ if filereadable(fnameescape(s:tclpath))
+ let s:tclpath= fnameescape(s:tclpath)
+ break
endif
- syn cluster vimFuncBodyList add=vimTclScript
+ endfor
+endif
+if (g:vimsyn_embed =~ 't') && filereadable(s:tclpath)
+ unlet! b:current_syntax
+ exe "syn include @vimTclScript ".s:tclpath
+ if exists("g:vimsyn_folding") && g:vimsyn_folding =~ 't'
+ syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript
+ syn region vimTclRegion fold matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript
else
- syn region vimEmbedError start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+
- syn region vimEmbedError start=+tc[l]\=\s*<<\s*$+ end=+\.$+
+ syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+ contains=@vimTclScript
+ syn region vimTclRegion matchgroup=vimScriptDelim start=+tc[l]\=\s*<<\s*$+ end=+\.$+ contains=@vimTclScript
endif
- unlet s:tclpath
+ syn cluster vimFuncBodyList add=vimTclScript
else
syn region vimEmbedError start=+tc[l]\=\s*<<\s*\z(.*\)$+ end=+^\z1$+
syn region vimEmbedError start=+tc[l]\=\s*<<\s*$+ end=+\.$+
endif
-unlet s:trytcl
+unlet s:tclpath
" [-- mzscheme --] {{{3
let s:mzschemepath= fnameescape(expand("<sfile>:p:h")."/scheme.vim")
syn match yamlFlowMappingMerge /<<\ze\s*:/ contained nextgroup=yamlKeyValueDelimiter
syn match yamlBlockCollectionItemStart '^\s*\zs-\%(\s\+-\)*\s' nextgroup=yamlBlockMappingKey,yamlBlockMappingMerge
-execute 'syn match yamlBlockMappingKey /^\s*\zs'.s:ns_plain_out.'\ze\s*:\%(\s\|$\)/ '.
+" Use the old regexp engine, the NFA engine doesn't like all the \@ items.
+execute 'syn match yamlBlockMappingKey /\%#=1^\s*\zs'.s:ns_plain_out.'\ze\s*:\%(\s\|$\)/ '.
\'nextgroup=yamlKeyValueDelimiter'
-execute 'syn match yamlBlockMappingKey /\s*\zs'.s:ns_plain_out.'\ze\s*:\%(\s\|$\)/ contained '.
+execute 'syn match yamlBlockMappingKey /\%#=1\s*\zs'.s:ns_plain_out.'\ze\s*:\%(\s\|$\)/ contained '.
\'nextgroup=yamlKeyValueDelimiter'
syn match yamlBlockMappingMerge /^\s*\zs<<\ze:\%(\s\|$\)/ nextgroup=yamlKeyValueDelimiter
syn match yamlBlockMappingMerge /<<\ze\s*:\%(\s\|$\)/ nextgroup=yamlKeyValueDelimiter contained
h (izquierda) j (abajo) k (arriba) l (derecha)
2. Para acceder a Vim (desde el símbolo del sistema %) escriba:
- vin FILENAME <INTRO>
+ vim FILENAME <INTRO>
3. Para salir de Vim escriba: <ESC> :q! <INTRO> para eliminar todos
los cambios.
msgstr ""
"Project-Id-Version: vim_7.4_ru\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-07-08 00:47+0400\n"
-"PO-Revision-Date: 2013-07-08 00:47+0400\n"
+"POT-Creation-Date: 2013-08-31 16:42+0400\n"
+"PO-Revision-Date: 2013-08-31 21:11+0400\n"
"Last-Translator: Sergey Alyoshin <alyoshin.s@gmail.com>\n"
"Language-Team: \n"
"Language: Russian\n"
msgid "E808: Number or Float required"
msgstr "E808: Òðåáóåòñÿ öåëîå ÷èñëî èëè ñ ïëàâàþùåé òî÷êîé"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "add() argument"
-msgstr "ïàðàìåòð add()"
+msgstr "ïàðàìåòðà add()"
msgid "E699: Too many arguments"
msgstr "E699: Ñëèøêîì ìíîãî ïàðàìåòðîâ"
msgid "E737: Key already exists: %s"
msgstr "E737: Êëþ÷ óæå ñóùåñòâóåò: %s"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "extend() argument"
-msgstr "ïàðàìåòð extend()"
+msgstr "ïàðàìåòðà extend()"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "map() argument"
-msgstr "ïàðàìåòð map()"
+msgstr "ïàðàìåòðà map()"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "filter() argument"
-msgstr "ïàðàìåòð filter()"
+msgstr "ïàðàìåòðà filter()"
#, c-format
msgid "+-%s%3ld lines: "
msgid "called inputrestore() more often than inputsave()"
msgstr "Ôóíêöèÿ inputrestore() âûçûâàåòñÿ ÷àùå, ÷åì ôóíêöèÿ inputsave()"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "insert() argument"
-msgstr "ïàðàìåòð insert()"
+msgstr "ïàðàìåòðà insert()"
msgid "E786: Range not allowed"
msgstr "E786: Äèàïàçîí íå äîïóñêàåòñÿ"
msgid "E277: Unable to read a server reply"
msgstr "E277: Ñåðâåð íå îòâå÷àåò"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "remove() argument"
-msgstr "ïàðàìåòð remove()"
+msgstr "ïàðàìåòðà remove()"
msgid "E655: Too many symbolic links (cycle?)"
msgstr "E655: Ñëèøêîì ìíîãî ñèìâîëè÷åñêèõ ññûëîê (öèêë?)"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "reverse() argument"
-msgstr "ïàðàìåòð reverse()"
+msgstr "ïàðàìåòðà reverse()"
msgid "E258: Unable to send to client"
msgstr "E258: Íå ìîãó îòâåòèòü êëèåíòó"
+#. Èñïîëüçóåòñÿ äëÿ ïîëó÷åíèÿ "çíà÷åíèå ïàðàìåòðà p()" â E741 è E742
msgid "sort() argument"
-msgstr "ïàðàìåòð sort()"
+msgstr "ïàðàìåòðà sort()"
msgid "E702: Sort compare function failed"
msgstr "E702: Íåóäà÷íîå çàâåðøåíèå ôóíêöèè ñðàâíåíèÿ ïðè ñîðòèðîâêå"
msgid "E705: Variable name conflicts with existing function: %s"
msgstr "E705: Èìÿ ïåðåìåííîé êîíôëèêòóåò ñ ñóùåñòâóþùåé ôóíêöèåé: %s"
+#. Èñïîëüçóåòñÿ ñ %s = "ïàðàìåòåðà p"
#, c-format
msgid "E741: Value is locked: %s"
-msgstr "E741: Çíà÷åíèå çàáëîêèðîâàíî: %s"
+msgstr "E741: Çíà÷åíèå %s çàáëîêèðîâàíî"
msgid "Unknown"
msgstr "Íåèçâåñòíî"
+#. Èñïîëüçóåòñÿ ñ %s = "ïàðàìåòåðà p()"
#, c-format
msgid "E742: Cannot change value of %s"
msgstr "E742: Íåâîçìîæíî èçìåíèòü çíà÷åíèå %s"
msgstr ""
"Project-Id-Version: vim_7.4_ru\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2013-07-08 00:47+0400\n"
-"PO-Revision-Date: 2013-07-08 00:47+0400\n"
+"POT-Creation-Date: 2013-08-31 16:42+0400\n"
+"PO-Revision-Date: 2013-08-31 21:11+0400\n"
"Last-Translator: Sergey Alyoshin <alyoshin.s@gmail.com>\n"
"Language-Team: \n"
"Language: Russian\n"
msgid "E808: Number or Float required"
msgstr "E808: Требуется целое число или с плавающей точкой"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "add() argument"
-msgstr "параметр add()"
+msgstr "параметра add()"
msgid "E699: Too many arguments"
msgstr "E699: Слишком много параметров"
msgid "E737: Key already exists: %s"
msgstr "E737: Ключ уже существует: %s"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "extend() argument"
-msgstr "параметр extend()"
+msgstr "параметра extend()"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "map() argument"
-msgstr "параметр map()"
+msgstr "параметра map()"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "filter() argument"
-msgstr "параметр filter()"
+msgstr "параметра filter()"
#, c-format
msgid "+-%s%3ld lines: "
msgid "called inputrestore() more often than inputsave()"
msgstr "Функция inputrestore() вызывается чаще, чем функция inputsave()"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "insert() argument"
-msgstr "параметр insert()"
+msgstr "параметра insert()"
msgid "E786: Range not allowed"
msgstr "E786: Диапазон не допускается"
msgid "E277: Unable to read a server reply"
msgstr "E277: Сервер не отвечает"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "remove() argument"
-msgstr "параметр remove()"
+msgstr "параметра remove()"
msgid "E655: Too many symbolic links (cycle?)"
msgstr "E655: Слишком много символических ссылок (цикл?)"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "reverse() argument"
-msgstr "параметр reverse()"
+msgstr "параметра reverse()"
msgid "E258: Unable to send to client"
msgstr "E258: Не могу ответить клиенту"
+#. Используется для получения "значение параметра p()" в E741 и E742
msgid "sort() argument"
-msgstr "параметр sort()"
+msgstr "параметра sort()"
msgid "E702: Sort compare function failed"
msgstr "E702: Неудачное завершение функции сравнения при сортировке"
msgid "E705: Variable name conflicts with existing function: %s"
msgstr "E705: Имя переменной конфликтует с существующей функцией: %s"
+#. Используется с %s = "параметера p"
#, c-format
msgid "E741: Value is locked: %s"
-msgstr "E741: Значение заблокировано: %s"
+msgstr "E741: Значение %s заблокировано"
msgid "Unknown"
msgstr "Неизвестно"
+#. Используется с %s = "параметера p()"
#, c-format
msgid "E742: Cannot change value of %s"
msgstr "E742: Невозможно изменить значение %s"
projects / vim / commitdiff