ESP_GATTC_UNREG_FOR_NOTIFY_EVT = 39, /*!< When unregister for notification of a service completes, the event comes */
ESP_GATTC_CONNECT_EVT = 40, /*!< When the ble physical connection is set up, the event comes */
ESP_GATTC_DISCONNECT_EVT = 41, /*!< When the ble physical connection disconnected, the event comes */
- ESP_GATTC_READ_MUTIPLE_EVT = 42, /*!< When the ble characteristic or descriptor mutiple complete, the event comes */
+ ESP_GATTC_READ_MULTIPLE_EVT = 42, /*!< When the ble characteristic or descriptor multiple complete, the event comes */
ESP_GATTC_QUEUE_FULL_EVT = 43, /*!< When the gattc command queue full, the event comes */
} esp_gattc_cb_event_t;
p_buf->hdr.layer_specific = conn_id;
p_buf->auth_req = auth_req;
p_buf->num_attr = p_read_multi->num_attr;
- p_buf->cmpl_evt = BTA_GATTC_READ_MUTIPLE_EVT;
+ p_buf->cmpl_evt = BTA_GATTC_READ_MULTIPLE_EVT;
if (p_buf->num_attr > 0) {
memcpy(p_buf->handles, p_read_multi->handles, sizeof(UINT16) * p_read_multi->num_attr);
}
#define BTA_GATTC_ADV_VSC_EVT 34 /* ADV VSC event */
#define BTA_GATTC_CONNECT_EVT 35 /* GATTC CONNECT event */
#define BTA_GATTC_DISCONNECT_EVT 36 /* GATTC DISCONNECT event */
-#define BTA_GATTC_READ_MUTIPLE_EVT 37 /* GATTC Read mutiple event */
+#define BTA_GATTC_READ_MULTIPLE_EVT 37 /* GATTC Read mutiple event */
#define BTA_GATTC_QUEUE_FULL_EVT 38 /* GATTC queue full event */
typedef UINT8 tBTA_GATTC_EVT;
// Allocate buffer for request data if necessary
switch (msg->act) {
case BTA_GATTC_READ_DESCR_EVT:
- case BTA_GATTC_READ_CHAR_EVT:
- case BTA_GATTC_READ_MUTIPLE_EVT: {
+ case BTA_GATTC_READ_CHAR_EVT:
+ case BTA_GATTC_READ_MULTIPLE_EVT: {
if (p_src_data->read.p_value && p_src_data->read.p_value->p_value) {
p_dest_data->read.p_value = (tBTA_GATT_UNFMT *)osi_malloc(sizeof(tBTA_GATT_UNFMT) + p_src_data->read.p_value->len);
p_dest_data->read.p_value->p_value = (uint8_t *)(p_dest_data->read.p_value + 1);
tBTA_GATTC *arg = (tBTA_GATTC *)(msg->arg);
switch (msg->act) {
case BTA_GATTC_READ_DESCR_EVT:
- case BTA_GATTC_READ_CHAR_EVT:
- case BTA_GATTC_READ_MUTIPLE_EVT: {
+ case BTA_GATTC_READ_CHAR_EVT:
+ case BTA_GATTC_READ_MULTIPLE_EVT: {
if (arg->read.p_value) {
osi_free(arg->read.p_value);
}
btc_gattc_cb_to_app(ESP_GATTC_READ_DESCR_EVT, gattc_if, ¶m);
break;
}
- case BTA_GATTC_READ_MUTIPLE_EVT: {
+ case BTA_GATTC_READ_MULTIPLE_EVT: {
set_read_value(&gattc_if, ¶m, &arg->read);
- btc_gattc_cb_to_app(ESP_GATTC_READ_MUTIPLE_EVT, gattc_if, ¶m);
+ btc_gattc_cb_to_app(ESP_GATTC_READ_MULTIPLE_EVT, gattc_if, ¶m);
break;
}
case BTA_GATTC_WRITE_DESCR_EVT: {
CONDITIONS OF ANY KIND, either express or implied.
*/
+
+/****************************************************************************
+* This is a demo for bluetooth config wifi connection to ap. You can config ESP32 to connect a softap
+* or config ESP32 as a softap to be connected by other device. APP can be downloaded from github
+* android source code: https://github.com/EspressifApp/EspBlufi
+* iOS source code: https://github.com/EspressifApp/EspBlufiForiOS
+****************************************************************************/
+
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
case ESP_GAP_BLE_LOCAL_ER_EVT: /* BLE local ER event */
ESP_LOGI(GATTC_TAG, "ESP_GAP_BLE_LOCAL_ER_EVT");
break;
- case ESP_GAP_BLE_NC_REQ_EVT:
- ESP_LOGI(GATTC_TAG, "ESP_GAP_BLE_NC_REQ_EVT");
- break;
case ESP_GAP_BLE_SEC_REQ_EVT:
/* send the positive(true) security response to the peer device to accept the security request.
If not accept the security request, should sent the security response with negative(false) accept value*/
esp_ble_gap_security_rsp(param->ble_security.ble_req.bd_addr, true);
break;
+ case ESP_GAP_BLE_NC_REQ_EVT:
+ /* The app will receive this evt when the IO has DisplayYesNO capability and the peer device IO also has DisplayYesNo capability.
+ show the passkey number to the user to confirm it with the number displayed by peer deivce. */
+ ESP_LOGI(GATTC_TAG, "ESP_GAP_BLE_NC_REQ_EVT, the passkey Notify number:%d", param->ble_security.key_notif.passkey);
+ break;
case ESP_GAP_BLE_PASSKEY_NOTIF_EVT: ///the app will receive this evt when the IO has Output capability and the peer device IO has Input capability.
///show the passkey number to the user to input it in the peer deivce.
ESP_LOGI(GATTC_TAG, "The passkey Notify number:%d", param->ble_security.key_notif.passkey);
ESP_LOGI(GATTS_TABLE_TAG, "ESP_GAP_BLE_LOCAL_ER_EVT");
break;
case ESP_GAP_BLE_NC_REQ_EVT:
- ESP_LOGI(GATTS_TABLE_TAG, "ESP_GAP_BLE_NC_REQ_EVT");
+ /* The app will receive this evt when the IO has DisplayYesNO capability and the peer device IO also has DisplayYesNo capability.
+ show the passkey number to the user to confirm it with the number displayed by peer deivce. */
+ ESP_LOGI(GATTS_TABLE_TAG, "ESP_GAP_BLE_NC_REQ_EVT, the passkey Notify number:%d", param->ble_security.key_notif.passkey);
break;
case ESP_GAP_BLE_SEC_REQ_EVT:
/* send the positive(true) security response to the peer device to accept the security request.
#define SAMPLE_DEVICE_NAME "ESP_GATTS_DEMO"
#define SVC_INST_ID 0
-#define GATTS_DEMO_CHAR_VAL_LEN_MAX 100
+/* The max length of characteristic value. When the gatt client write or prepare write,
+* the data length must be less than GATTS_DEMO_CHAR_VAL_LEN_MAX.
+*/
+#define GATTS_DEMO_CHAR_VAL_LEN_MAX 500
#define PREPARE_BUF_MAX_SIZE 1024
#define CHAR_DECLARATION_SIZE (sizeof(uint8_t))
break;
case ESP_GATTS_WRITE_EVT:
if (!param->write.is_prep){
+ // the data length of gattc write must be less than GATTS_DEMO_CHAR_VAL_LEN_MAX.
ESP_LOGI(GATTS_TABLE_TAG, "GATT_WRITE_EVT, handle = %d, value len = %d, value :", param->write.handle, param->write.len);
esp_log_buffer_hex(GATTS_TABLE_TAG, param->write.value, param->write.len);
if (heart_rate_handle_table[IDX_CHAR_CFG_A] == param->write.handle && param->write.len == 2){
example_prepare_write_event_env(gatts_if, &prepare_write_env, param);
}
break;
- case ESP_GATTS_EXEC_WRITE_EVT:
+ case ESP_GATTS_EXEC_WRITE_EVT:
+ // the length of gattc prapare write data must be less than GATTS_DEMO_CHAR_VAL_LEN_MAX.
ESP_LOGI(GATTS_TABLE_TAG, "ESP_GATTS_EXEC_WRITE_EVT");
example_exec_write_event_env(&prepare_write_env, param);
break;
projects / esp-idf / commitdiff