-README_mac.txt for version 7.1a of Vim: Vi IMproved.
+README_mac.txt for version 7.1b of Vim: Vi IMproved.
This file explains the installation of Vim on Macintosh systems.
See "README.txt" for general information about Vim.
-*if_mzsch.txt* For Vim version 7.1a. Last change: 2007 May 03
+*if_mzsch.txt* For Vim version 7.1b. Last change: 2007 May 03
VIM REFERENCE MANUAL by Sergey Khorev
-*if_perl.txt* For Vim version 7.1a. Last change: 2006 Mar 06
+*if_perl.txt* For Vim version 7.1b. Last change: 2006 Mar 06
VIM REFERENCE MANUAL by Sven Verdoolaege
-*indent.txt* For Vim version 7.1a. Last change: 2007 Mar 17
+*indent.txt* For Vim version 7.1b. Last change: 2007 May 10
VIM REFERENCE MANUAL by Bram Moolenaar
"<!>", respectively, for those keys.
For an emacs-style indent mode where lines aren't indented every time you
-press Enter but only if you press Tab, I suggest:
+press <Enter> but only if you press Tab, I suggest:
:set cinkeys=0{,0},:,0#,!<Tab>,!^F
You might also want to switch off 'autoindent' then.
let g:pyindent_continue = '&sw * 2'
+SHELL *ft-sh-indent*
+
+The amount of indent applied under various circumstances in a shell file can
+be configured by setting the following keys in the |Dictionary|
+b:sh_indent_defaults to a specific amount or to a |Funcref| that references a
+function that will return the amount desired:
+
+b:sh_indent_options['default'] Default amount of indent.
+
+b:sh_indent_options['continuation-line']
+ Amount of indent to add to a continued line.
+
+b:sh_indent_options['case-labels']
+ Amount of indent to add for case labels.
+
+b:sh_indent_options['case-statement']
+ Amount of indent to add for case statements.
+
+b:sh_indent_options['case-breaks']
+ Amount of indent to add (or more likely
+ remove) for case breaks.
+
VERILOG *ft-verilog-indent*
General block statements such as if, for, case, always, initial, function,
-*os_risc.txt* For Vim version 7.1a. Last change: 2005 Mar 29
+*os_risc.txt* For Vim version 7.1b. Last change: 2005 Mar 29
VIM REFERENCE MANUAL by Thomas Leonard
-*pi_getscript.txt* For Vim version 7.1a. Last change: 2007 Apr 26
+*pi_getscript.txt* For Vim version 7.1b. Last change: 2007 May 08
>
GETSCRIPT REFERENCE MANUAL by Charles E. Campbell, Jr.
<
out-of-date.
The SourceID is extracted by GetLatestVimScripts from the script's page on
-vim.sf.net; whenever its greater than the one stored in the
+vim.sf.net; whenever it's greater than the one stored in the
GetLatestVimScripts.dat file, the script will be downloaded
(see |GetLatestVimScripts_dat|).
is a line specifying the latest source-id (src_id). The source identifier
numbers are always increasing, hence if the src_id is greater than the one
-recorded for the script in GetLatestVimScripts then its time to download a
+recorded for the script in GetLatestVimScripts then it's time to download a
newer copy of that script.
GetLatestVimScripts will then download the script and update its internal
==============================================================================
9. GetLatestVimScripts History *getscript-history* *glvs-hist* {{{1
+v24 Apr 16, 2007 : * removed save&restore of the fo option during script
+ loading
v23 Nov 03, 2006 : * ignores comments (#...)
* handles vimballs
v22 Oct 13, 2006 : * supports automatic use of curl if wget is not
-*pi_vimball.txt* For Vim version 7.1a. Last change: 2007 Jan 03
+*pi_vimball.txt* For Vim version 7.1b. Last change: 2007 May 08
----------------
Vimball Archiver
==============================================================================
3. Vimball History *vimball-history* {{{1
+ 22 : Mar 21, 2007 * uses setlocal instead of set during BufEnter
21 : Nov 27, 2006 * (tnx to Bill McCarthy) vimball had a header
handling problem and it now changes \s to /s
20 : Nov 20, 2006 * substitute() calls have all had the 'e' flag
10 : Apr 27, 2006 * moved all setting saving/restoration to a pair of
functions. Included some more settings in them
which frequently cause trouble.
- 9 : Apr 26, 2006 * various changes to support Windows prediliction
+ 9 : Apr 26, 2006 * various changes to support Windows predilection
for backslashes and spaces in file and directory
names.
7 : Apr 25, 2006 * bypasses foldenable
-*pi_zip.txt* For Vim version 7.1a. Last change: 2006 Sep 29
+*pi_zip.txt* For Vim version 7.1b. Last change: 2007 May 08
+====================+
| Zip File Interface |
Author: Charles E. Campbell, Jr. <NdrOchip@ScampbellPfamily.AbizM>
(remove NOSPAM from Campbell's email first)
-Copyright: Copyright (C) 2005,2006 Charles E Campbell, Jr {{{1 *zip-copyright*
+Copyright: Copyright (C) 2005,2006 Charles E Campbell, Jr *zip-copyright*
Permission is hereby granted to use and distribute this code,
with or without modifications, provided that this copyright
notice is copied with it. Like anything else that's free,
==============================================================================
1. Contents *zip* *zip-contents*
- 1. Contents..................................................|zip-contents|
- 2. Usage.....................................................|zip-usage|
- 3. History...................................................|zip-history|
+ 1. Contents................................................|zip-contents|
+ 2. Usage...................................................|zip-usage|
+ 3. Additional Extensions...................................|zip-extension|
+ 4. History.................................................|zip-history|
==============================================================================
2. Usage *zip-usage* *zip-manual*
also write to the file. Currently, one may not make a new file in
zip archives via the plugin.
- The zip program supports one option: >
- g:zip_shq
+ OPTIONS
+ *zip_shq*
+ Different operating systems may use one or more shells to execute
+ commands. Zip will try to guess the correct quoting mechanism to
+ allow spaces and whatnot in filenames; however, if it is incorrectly
+ guessing the quote to use for your setup, you may use >
+ g:zip_shq
< which by default is a single quote under Unix (') and a double quote
under Windows ("). If you'd rather have no quotes, simply set
g:zip_shq to the empty string (let g:zip_shq= "") in your <.vimrc>.
+ *g:zip_unzipcmd*
+ Use this option to specify the program which does the duty of "unzip".
+ Its used during browsing. By default: >
+ let g:zip_unzipcmd= "unzip"
+<
+ *g:zip_zipcmd*
+ Use this option to specify the program which does the duty of "zip".
+ Its used during the writing (updating) of a file already in a zip
+ file; by default: >
+ let g:zip_zipcmd= "zip"
+<
+
+==============================================================================
+3. Additional Extensions *zip-extension*
+
+ Apparently there are a number of archivers who generate zip files that
+ don't use the .zip extension (.jar, .xpi, etc). To handle such files,
+ place a line in your <.vimrc> file: >
+
+ au BufReadCmd *.jar,*.xpi call zip#Browse(expand("<amatch>"))
+<
+ One can simply extend this line to accomdate additional extensions that
+ are actually zip files.
+
==============================================================================
-3. History *zip-history*
+4. History *zip-history* {{{1
+ v14 May 07, 2007 * using b:zipfile instead of w:zipfile to avoid problem
+ when editing alternate file to bring up a zipfile
v10 May 02, 2006 * now using "redraw then echo" to show messages, instead
of "echo and prompt user"
* g:zip_shq provided to allow for quoting control for the
v1 Sep 15, 2005 * Initial release, had browsing, reading, and writing
==============================================================================
-vim:tw=78:ts=8:ft=help
+vim:tw=78:ts=8:ft=help:fdm=marker
-*usr_02.txt* For Vim version 7.1a. Last change: 2007 Feb 28
+*usr_02.txt* For Vim version 7.1b. Last change: 2007 Feb 28
VIM USER MANUAL - by Bram Moolenaar
-*usr_44.txt* For Vim version 7.1a. Last change: 2006 Apr 24
+*usr_44.txt* For Vim version 7.1b. Last change: 2006 Apr 24
VIM USER MANUAL - by Bram Moolenaar
" Vim indent file
" Language: dict(1) configuration file
" Maintainer: Nikolai Weibull <now@bitwi.se>
-" Latest Revision: 2006-04-19
+" Latest Revision: 2006-12-20
if exists("b:did_indent")
finish
let b:did_indent = 1
setlocal indentkeys=0{,0},!^F,o,O cinwords= autoindent smartindent
+setlocal nosmartindent
inoremap <buffer> # X\b#
" Language: shell (sh) Korn shell (ksh) bash (sh)
" Maintainer: Dr. Charles E. Campbell, Jr. <NdrOchipS@PcampbellAfamily.Mbiz>
" Previous Maintainer: Lennart Schultz <Lennart.Schultz@ecmwf.int>
-" Last Change: Sep 15, 2006
-" Version: 88
+" Last Change: Dec 12, 2006
+" Version: 89
" URL: http://mysite.verizon.net/astronaut/vim/index.html#vimlinks_syntax
"
" Using the following VIM variables: {{{1
syn cluster shColonList contains=@shCaseList
syn cluster shCommandSubList contains=shArithmetic,shDeref,shDerefSimple,shNumber,shOperator,shPosnParm,shExSingleQuote,shSingleQuote,shDoubleQuote,shStatement,shVariable,shSubSh,shAlias,shTest,shCtrlSeq
syn cluster shCurlyList contains=shNumber,shComma,shDeref,shDerefSimple,shDerefSpecial
-syn cluster shDblQuoteList contains=shCommandSub,shDeref,shDerefSimple,shPosnParm,shExSingleQuote,shCtrlSeq
+syn cluster shDblQuoteList contains=shCommandSub,shDeref,shDerefSimple,shPosnParm,shExSingleQuote,shCtrlSeq,shSpecial
syn cluster shDerefList contains=shDeref,shDerefSimple,shDerefVar,shDerefSpecial,shDerefWordError,shDerefPPS
syn cluster shDerefVarList contains=shDerefOp,shDerefVarArray,shDerefOpError
syn cluster shEchoList contains=shArithmetic,shCommandSub,shDeref,shDerefSimple,shExpr,shExSingleQuote,shSingleQuote,shDoubleQuote,shCtrlSeq
syn cluster shExprList1 contains=shCharClass,shNumber,shOperator,shExSingleQuote,shSingleQuote,shDoubleQuote,shExpr,shDblBrace,shDeref,shDerefSimple,shCtrlSeq
syn cluster shExprList2 contains=@shExprList1,@shCaseList,shTest
syn cluster shFunctionList contains=@shCommandSubList,shCaseEsac,shColon,shCommandSub,shCommandSub,shComment,shDo,shEcho,shExpr,shFor,shHereDoc,shIf,shRedir,shSetList,shSource,shStatement,shVariable,shOperator,shFunctionStart,shCtrlSeq
+if exists("b:is_kornshell") || exists("b:is_bash")
+ syn cluster shFunctionList add=shDblBrace,shDblParen
+endif
syn cluster shHereBeginList contains=@shCommandSubList
syn cluster shHereList contains=shBeginHere,shHerePayload
syn cluster shHereListDQ contains=shBeginHere,@shDblQuoteList,shHerePayload
syn cluster shIdList contains=shCommandSub,shWrapLineOperator,shIdWhiteSpace,shDeref,shDerefSimple,shRedir,shExSingleQuote,shSingleQuote,shDoubleQuote,shExpr,shCtrlSeq
syn cluster shLoopList contains=@shCaseList,shTestOpr,shExpr,shDblBrace,shConditional,shCaseEsac,shTest
-syn cluster shSubShList contains=@shCaseList
+syn cluster shSubShList contains=@shCaseList,shOperator
syn cluster shTestList contains=shCharClass,shComment,shCommandSub,shDeref,shDerefSimple,shDoubleQuote,shExpr,shExpr,shNumber,shOperator,shExSingleQuote,shSingleQuote,shTestOpr,shTest,shCtrlSeq
syn match shOption "\s[\-+][a-zA-Z0-9]\+\>"ms=s+1
syn match shOption "\s--[^ \t$`'"|]\+"ms=s+1
+" File Redirection Highlighted As Operators: {{{1
+"===========================================
+syn match shRedir "\d\=>\(&[-0-9]\)\="
+syn match shRedir "\d\=>>-\="
+syn match shRedir "\d\=<\(&[-0-9]\)\="
+syn match shRedir "\d<<-\="
+
" Operators: {{{1
" ==========
+syn match shOperator "<<\|>>" contained
syn match shOperator "[!&;|]"
syn match shOperator "\[[[^:]\|\]]"
syn match shOperator "!\==" skipwhite nextgroup=shPattern
" ====
syn match shCaseBar contained skipwhite "[^|"`'()]\{-}|"hs=e nextgroup=shCase,shCaseStart,shCaseBar,shComment,shCaseExSingleQuote,shCaseSingleQuote,shCaseDoubleQuote
syn match shCaseStart contained skipwhite skipnl "(" nextgroup=shCase,shCaseBar
-syn region shCase contained skipwhite skipnl matchgroup=shSnglCase start="[^#$()'"]\{-})"ms=s,hs=e end=";;" end="esac"me=s-1 contains=@shCaseList nextgroup=shCaseStart,shCase,shComment
+syn region shCase contained skipwhite skipnl matchgroup=shSnglCase start="\([^#$()'" \t]\|\\.\)\{-})"ms=s,hs=e end=";;" end="esac"me=s-1 contains=@shCaseList nextgroup=shCaseStart,shCase,shComment
if g:sh_fold_enabled
syn region shCaseEsac fold matchgroup=shConditional start="\<case\>" end="\<esac\>" contains=@shCaseEsacList
else
syn region shSingleQuote matchgroup=shOperator start=+'+ end=+'+ contains=shStringSpecial,@Spell
syn region shDoubleQuote matchgroup=shOperator start=+"+ skip=+\\"+ end=+"+ contains=@shDblQuoteList,shStringSpecial,@Spell
syn match shStringSpecial "[^[:print:]]" contained
-syn match shSpecial "\\[\\\"\'`$()#]"
+syn match shStringSpecial "\%(\\\\\)*\\[\\"'`$()#]"
+syn match shSpecial "[^\\]\zs\%(\\\\\)*\\[\\"'`$()#]"
+syn match shSpecial "^\%(\\\\\)*\\[\\"'`$()#]"
" Comments: {{{1
"==========
syn cluster shCommentGroup contains=shTodo,@Spell
syn keyword shTodo contained COMBAK FIXME TODO XXX
-syn match shComment "^#.*$" contains=@shCommentGroup
-syn match shComment "[^0-9]#.*$" contains=@shCommentGroup
-
-" File Redirection Highlighted As Operators: {{{1
-"===========================================
-syn match shRedir "\d\=>\(&[-0-9]\)\="
-syn match shRedir "\d\=>>-\="
-syn match shRedir "\d\=<\(&[-0-9]\)\="
-syn match shRedir "\d<<-\="
+syn match shComment "^\s*\zs#.*$" contains=@shCommentGroup
+syn match shComment "#.*$" contains=@shCommentGroup
" Here Documents: {{{1
" =========================================
" Functions: {{{1
syn keyword shFunctionKey function skipwhite skipnl nextgroup=shFunctionTwo
-syn match shFunctionStart "^\s*{" contained
+" COMBAK -- look at bash09. function foo() (line#35) is folding 38 lines. Not being terminated properly
+"syn match shFunctionStart "{" contained
if g:sh_fold_enabled
- syn region shFunctionOne transparent fold start="^\s*\h\w*\s*()\_s*\ze{" matchgroup=shFunctionStart end="}" contains=@shFunctionList
- syn region shFunctionTwo transparent fold start="\h\w*\s*\%(()\)\=\_s*\ze{" matchgroup=shFunctionStart end="}" contains=shFunctionKey,@shFunctionList contained
+ syn region shFunctionOne transparent fold start="^\s*\h\w*\s*()\_s*\ze{" matchgroup=shFunctionStart end="}" contains=@shFunctionList skipwhite skipnl nextgroup=shFunctionStart
+ syn region shFunctionTwo transparent fold start="\h\w*\s*\%(()\)\=\_s*\ze{" matchgroup=shFunctionStart end="}" contains=shFunctionKey,@shFunctionList contained skipwhite skipnl nextgroup=shFunctionStart
else
syn region shFunctionOne transparent start="^\s*\h\w*\s*()\_s*\ze{" matchgroup=shFunctionStart end="}" contains=@shFunctionList
syn region shFunctionTwo transparent start="\h\w*\s*\%(()\)\=\_s*\ze{" matchgroup=shFunctionStart end="}" contains=shFunctionKey,@shFunctionList contained
[HKEY_LOCAL_MACHINE\Software\Vim\Gvim]
"path"="gvim.exe"
-[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Vim 7.1a]
- "DisplayName"="Vim 7.1a: Edit with Vim popup menu entry"
+[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Vim 7.1b]
+ "DisplayName"="Vim 7.1b: Edit with Vim popup menu entry"
"UninstallString"="uninstal.exe"
#>>>>> choose options:
# set to yes for a debug build
DEBUG=no
-# set to SIZE for size, SPEED for speed, MAXSPEED for maximium optimization
+# set to SIZE for size, SPEED for speed, MAXSPEED for maximum optimization
OPTIMIZE=MAXSPEED
# set to yes to make gvim, no for vim
GUI=yes
else if (conv_restlen > 0)
{
/* Reached end-of-file but some trailing bytes could
- * not be converted. Trucated file? */
+ * not be converted. Truncated file? */
if (conv_error == 0)
conv_error = linecnt;
if (bad_char_behavior != BAD_DROP)
if (filesize == 0)
linecnt = 0;
if (newfile || read_buffer)
+ {
redraw_curbuf_later(NOT_VALID);
- else if (linecnt) /* appended at least one line */
- appended_lines_mark(from, linecnt);
-
#ifdef FEAT_DIFF
- /* After reading the text into the buffer the diff info needs to be
- * updated. */
- if (newfile || read_buffer)
+ /* After reading the text into the buffer the diff info needs to
+ * be updated. */
diff_invalidate(curbuf);
#endif
+#ifdef FEAT_FOLDING
+ /* All folds in the window are invalid now. Mark them for update
+ * before triggering autocommands. */
+ foldUpdateAll(curwin);
+#endif
+ }
+ else if (linecnt) /* appended at least one line */
+ appended_lines_mark(from, linecnt);
+
#ifndef ALWAYS_USE_GUI
/*
* If we were reading from the same terminal as where messages go,
/* TODO: Is it need for MACOS_X? (Dany) */
/*
* On macintosh copy the original files attributes (i.e. the backup)
- * This is done in order to preserve the ressource fork and the
- * Finder attribute (label, comments, custom icons, file creatore)
+ * This is done in order to preserve the resource fork and the
+ * Finder attribute (label, comments, custom icons, file creator)
*/
if (backup != NULL && overwriting && !append)
{
{
if (buf->b_ffname != NULL)
(void)mch_copy_file_attribute(buf->b_ffname, wfname);
- /* Should copy ressource fork */
+ /* Should copy resource fork */
}
#endif
#endif
/*
* If the extension doesn't start with '.', and there already is an
- * extension, it may need to be tructated
+ * extension, it may need to be truncated
*/
else if ((int)STRLEN(e) + extlen > 4)
s = e + 4 - extlen;
/*
* With MSDOS-compatible filesystems (crossdos, messydos) it is possible
* that the name of the "to" file is the same as the "from" file, even
- * though the names are different. To avoid the chance of accidently
+ * though the names are different. To avoid the chance of accidentally
* deleting the "from" file (horror!) we lock it during the remove.
*
* When used for making a backup before writing the file: This should not
errmsg = _("E210: Error reading \"%s\"");
to = from;
}
-#ifndef UNIX /* for Unix mch_open() already set ther permission */
+#ifndef UNIX /* for Unix mch_open() already set the permission */
mch_setperm(to, perm);
#endif
#ifdef HAVE_ACL
#ifdef FEAT_EVAL
/*
- * Quickly return when immdediately aborting on error, or when an interrupt
+ * Quickly return when immediately aborting on error, or when an interrupt
* occurred or an exception was thrown but not caught.
*/
if (aborting())
}
/* Size of buffer has changed.
- * Add one to max since gui.c substracts one more than it should!
+ * Add one to max since gui.c subtracts one more than it should!
*/
void
gui_mch_set_scrollbar_thumb(sb, val, size, max)
s_hwnd,
WS_CHILD | WS_VISIBLE,
CMD_TB_BASE, /*<vn>*/
- 31, //number of images in inital bitmap
+ 31, //number of images in initial bitmap
s_hinst,
IDR_TOOLBAR1, // id of initial bitmap
NULL,
/* Define as the command at the end of signal handlers ("" or "return 0;"). */
#define SIGRETURN
-/* Define if touuper/tolower only work on lower/upercase characters */
+/* Define if toupper/tolower only work on lower/uppercase characters */
#undef BROKEN_TOUPPER
/* Define if tgetstr() has a second argument that is (char *) */
projects / vim / commitdiff