libpq_builddir = $(top_builddir)/src/interfaces/libpq
endif
-# This macro is for use by libraries linking to libpq. (Because libpgport
-# isn't created with the same link flags as libpq, it can't be used.)
+# How to link to libpq. (This macro may be used as-is by backend extensions.
+# Client-side code should go through libpq_pgport or libpq_pgport_shlib,
+# instead.)
libpq = -L$(libpq_builddir) -lpq
-# This macro is for use by client executables (not libraries) that use libpq.
+# libpq_pgport is for use by client executables (not libraries) that use libpq.
# We force clients to pull symbols from the non-shared libraries libpgport
# and libpgcommon rather than pulling some libpgport symbols from libpq just
# because libpq uses those functions too. This makes applications less
-# dependent on changes in libpq's usage of pgport. To do this we link to
+# dependent on changes in libpq's usage of pgport (on platforms where we
+# don't have symbol export control for libpq). To do this we link to
# pgport before libpq. This does cause duplicate -lpgport's to appear
-# on client link lines.
+# on client link lines, since that also appears in $(LIBS).
+# libpq_pgport_shlib is the same idea, but for use in client shared libraries.
ifdef PGXS
libpq_pgport = -L$(libdir) -lpgcommon -lpgport $(libpq)
+libpq_pgport_shlib = -L$(libdir) -lpgcommon_shlib -lpgport_shlib $(libpq)
else
libpq_pgport = -L$(top_builddir)/src/common -lpgcommon -L$(top_builddir)/src/port -lpgport $(libpq)
+libpq_pgport_shlib = -L$(top_builddir)/src/common -lpgcommon_shlib -L$(top_builddir)/src/port -lpgport_shlib $(libpq)
endif
# Cygwin seems to need ldap libraries to be mentioned here, too
# Makefile
# Makefile for src/common
#
-# This makefile generates two outputs:
+# These files are used by the Postgres backend, and also by frontend
+# programs. These files provide common functionality that isn't directly
+# concerned with portability and thus doesn't belong in src/port.
+#
+# This makefile generates three outputs:
#
# libpgcommon.a - contains object files with FRONTEND defined,
# for use by client applications
#
-# libpgcommon_srv.a - contains object files without FRONTEND defined,
-# for use only by the backend binaries
+# libpgcommon_shlib.a - contains object files with FRONTEND defined,
+# built suitably for use in shared libraries; for use
+# by frontend libraries
#
-# You can also symlink/copy individual source files from this directory,
-# to compile with different options. (libpq does that, because it needs
-# to use -fPIC on some platforms.)
+# libpgcommon_srv.a - contains object files without FRONTEND defined,
+# for use only by the backend
#
# IDENTIFICATION
# src/common/Makefile
OBJS_COMMON += sha2.o
endif
+# A few files are currently only built for frontend, not server
OBJS_FRONTEND = $(OBJS_COMMON) fe_memutils.o file_utils.o restricted_token.o
+# foo.o, foo_shlib.o, and foo_srv.o are all built from foo.c
+OBJS_SHLIB = $(OBJS_FRONTEND:%.o=%_shlib.o)
OBJS_SRV = $(OBJS_COMMON:%.o=%_srv.o)
-all: libpgcommon.a libpgcommon_srv.a
+all: libpgcommon.a libpgcommon_shlib.a libpgcommon_srv.a
# libpgcommon is needed by some contrib
install: all installdirs
$(INSTALL_STLIB) libpgcommon.a '$(DESTDIR)$(libdir)/libpgcommon.a'
+ $(INSTALL_STLIB) libpgcommon_shlib.a '$(DESTDIR)$(libdir)/libpgcommon_shlib.a'
installdirs:
$(MKDIR_P) '$(DESTDIR)$(libdir)'
uninstall:
rm -f '$(DESTDIR)$(libdir)/libpgcommon.a'
+ rm -f '$(DESTDIR)$(libdir)/libpgcommon_shlib.a'
libpgcommon.a: $(OBJS_FRONTEND)
rm -f $@
$(AR) $(AROPT) $@ $^
+#
+# Shared library versions of object files
+#
+
+libpgcommon_shlib.a: $(OBJS_SHLIB)
+ rm -f $@
+ $(AR) $(AROPT) $@ $^
+
+# Because this uses its own compilation rule, it doesn't use the
+# dependency tracking logic from Makefile.global. To make sure that
+# dependency tracking works anyway for the *_shlib.o files, depend on
+# their *.o siblings as well, which do have proper dependencies. It's
+# a hack that might fail someday if there is a *_shlib.o without a
+# corresponding *.o, but there seems little reason for that.
+%_shlib.o: %.c %.o
+ $(CC) $(CFLAGS) $(CFLAGS_SL) $(CPPFLAGS) -c $< -o $@
+
#
# Server versions of object files
#
# a hack that might fail someday if there is a *_srv.o without a
# corresponding *.o, but it works for now.
%_srv.o: %.c %.o
- $(CC) $(CFLAGS) $(subst -DFRONTEND ,, $(CPPFLAGS)) -c $< -o $@
+ $(CC) $(CFLAGS) $(subst -DFRONTEND,, $(CPPFLAGS)) -c $< -o $@
# Dependencies of keywords.o need to be managed explicitly to make sure
# that you don't get broken parsing code, even in a non-enable-depend build.
-# Note that gram.h isn't required for the frontend version of keywords.o.
+# Note that gram.h isn't required for the frontend versions of keywords.o.
$(top_builddir)/src/include/parser/gram.h: $(top_srcdir)/src/backend/parser/gram.y
$(MAKE) -C $(top_builddir)/src/backend $(top_builddir)/src/include/parser/gram.h
keywords.o: $(top_srcdir)/src/include/parser/kwlist.h
+keywords_shlib.o: $(top_srcdir)/src/include/parser/kwlist.h
keywords_srv.o: $(top_builddir)/src/include/parser/gram.h $(top_srcdir)/src/include/parser/kwlist.h
clean distclean maintainer-clean:
- rm -f libpgcommon.a libpgcommon_srv.a $(OBJS_FRONTEND) $(OBJS_SRV)
+ rm -f libpgcommon.a libpgcommon_shlib.a libpgcommon_srv.a
+ rm -f $(OBJS_FRONTEND) $(OBJS_SHLIB) $(OBJS_SRV)
/compatlib.def
/blibecpg_compatdll.def
/exports.list
-/snprintf.c
-/strerror.c
-/strlcpy.c
-/strnlen.c
-I$(libpq_srcdir) -DFRONTEND $(CPPFLAGS)
override CFLAGS += $(PTHREAD_CFLAGS)
-SHLIB_LINK_INTERNAL = -L../ecpglib -lecpg -L../pgtypeslib -lpgtypes $(libpq)
+SHLIB_LINK_INTERNAL = -L../ecpglib -lecpg -L../pgtypeslib -lpgtypes $(libpq_pgport_shlib)
SHLIB_LINK = $(filter -lintl -lm, $(LIBS)) $(PTHREAD_LIBS)
SHLIB_PREREQS = submake-ecpglib submake-pgtypeslib
SHLIB_EXPORTS = exports.txt
-# Need to recompile any libpgport object files
-LIBS := $(filter-out -lpgport, $(LIBS))
-
-OBJS= informix.o snprintf.o strerror.o \
- $(filter strlcpy.o strnlen.o, $(LIBOBJS)) $(WIN32RES)
+OBJS= informix.o $(WIN32RES)
PKG_CONFIG_REQUIRES_PRIVATE = libecpg libpgtypes
# Shared library stuff
include $(top_srcdir)/src/Makefile.shlib
-snprintf.c strerror.c strlcpy.c strnlen.c: % : $(top_srcdir)/src/port/%
- rm -f $@ && $(LN_S) $< .
-
install: all installdirs install-lib
installdirs: installdirs-lib
uninstall: uninstall-lib
clean distclean: clean-lib
- rm -f $(OBJS) snprintf.c strerror.c strlcpy.c strnlen.c
+ rm -f $(OBJS)
maintainer-clean: distclean maintainer-clean-lib
/ecpglib.def
/blibecpgdll.def
/exports.list
-/path.c
-/pgstrcasecmp.c
-/snprintf.c
-/strerror.c
-/strlcpy.c
-/strnlen.c
-/thread.c
-/win32setlocale.c
-/isinf.c
-I$(libpq_srcdir) -I$(top_builddir)/src/port -DFRONTEND $(CPPFLAGS)
override CFLAGS += $(PTHREAD_CFLAGS)
-# Need to recompile any libpgport object files
-LIBS := $(filter-out -lpgport, $(LIBS))
+OBJS= execute.o typename.o descriptor.o sqlda.o data.o error.o prepare.o \
+ memory.o connect.o misc.o $(WIN32RES)
-OBJS= execute.o typename.o descriptor.o sqlda.o data.o error.o prepare.o memory.o \
- connect.o misc.o path.o pgstrcasecmp.o snprintf.o strerror.o \
- $(filter strlcpy.o strnlen.o win32setlocale.o isinf.o, $(LIBOBJS)) \
- $(WIN32RES)
-
-# thread.c is needed only for non-WIN32 implementation of path.c
-ifneq ($(PORTNAME), win32)
-OBJS += thread.o
-endif
-
-SHLIB_LINK_INTERNAL = -L../pgtypeslib -lpgtypes $(libpq)
+SHLIB_LINK_INTERNAL = -L../pgtypeslib -lpgtypes $(libpq_pgport_shlib)
SHLIB_LINK = $(filter -lintl -lm, $(LIBS)) $(PTHREAD_LIBS)
SHLIB_PREREQS = submake-libpq submake-pgtypeslib
# Shared library stuff
include $(top_srcdir)/src/Makefile.shlib
-# We use some port modules verbatim, but since we need to
-# compile with appropriate options to build a shared lib, we can't
-# necessarily use the same object files as the backend uses. Instead,
-# symlink the source files in here and build our own object file.
-
-path.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c strnlen.c thread.c win32setlocale.c isinf.c: % : $(top_srcdir)/src/port/%
- rm -f $@ && $(LN_S) $< .
-
+# Make dependency on pg_config_paths.h visible.
misc.o: misc.c $(top_builddir)/src/port/pg_config_paths.h
-path.o: path.c $(top_builddir)/src/port/pg_config_paths.h
$(top_builddir)/src/port/pg_config_paths.h:
$(MAKE) -C $(top_builddir)/src/port pg_config_paths.h
clean distclean: clean-lib
rm -f $(OBJS)
- rm -f path.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c strnlen.c thread.c win32setlocale.c isinf.c
maintainer-clean: distclean maintainer-clean-lib
/pgtypeslib.def
/blibpgtypesdll.def
/exports.list
-/pgstrcasecmp.c
-/rint.c
-/snprintf.c
-/strerror.c
-/strlcpy.c
-/string.c
-/strnlen.c
-DFRONTEND $(CPPFLAGS)
override CFLAGS += $(PTHREAD_CFLAGS)
-# Need to recompile any libpgport object files
-LIBS := $(filter-out -lpgport, $(LIBS))
-
+SHLIB_LINK_INTERNAL = -lpgcommon_shlib -lpgport_shlib
SHLIB_LINK += $(filter -lintl -lm, $(LIBS))
SHLIB_EXPORTS = exports.txt
OBJS= numeric.o datetime.o common.o dt_common.o timestamp.o interval.o \
- pgstrcasecmp.o snprintf.o strerror.o \
- $(filter rint.o strlcpy.o strnlen.o, $(LIBOBJS)) \
- string.o \
$(WIN32RES)
all: all-lib
# Shared library stuff
include $(top_srcdir)/src/Makefile.shlib
-# We use some port modules verbatim, but since we need to
-# compile with appropriate options to build a shared lib, we can't
-# necessarily use the same object files as the backend uses. Instead,
-# symlink the source files in here and build our own object file.
-
-pgstrcasecmp.c rint.c snprintf.c strerror.c strlcpy.c strnlen.c: % : $(top_srcdir)/src/port/%
- rm -f $@ && $(LN_S) $< .
-
-string.c: % : $(top_srcdir)/src/common/%
- rm -f $@ && $(LN_S) $< .
-
install: all installdirs install-lib
installdirs: installdirs-lib
uninstall: uninstall-lib
clean distclean: clean-lib
- rm -f $(OBJS) pgstrcasecmp.c rint.c snprintf.c strerror.c strlcpy.c strnlen.c string.c
+ rm -f $(OBJS)
maintainer-clean: distclean maintainer-clean-lib
/exports.list
/libpq.rc
# .c files that are symlinked in from elsewhere
-/ip.c
-/md5.c
-/base64.c
-/link-canary.c
-/scram-common.c
-/sha2.c
-/sha2_openssl.c
-/saslprep.c
-/unicode_norm.c
/encnames.c
/wchar.c
# src/backend/utils/mb
OBJS += encnames.o wchar.o
-# src/common
-OBJS += base64.o ip.o link-canary.o md5.o scram-common.o saslprep.o unicode_norm.o
ifeq ($(with_openssl),yes)
-OBJS += fe-secure-openssl.o fe-secure-common.o sha2_openssl.o
-else
-OBJS += sha2.o
+OBJS += fe-secure-openssl.o fe-secure-common.o
endif
ifeq ($(PORTNAME), cygwin)
# Add libraries that libpq depends (or might depend) on into the
# shared library link. (The order in which you list them here doesn't
-# matter.) Note that we filter out -lpgport from LIBS and instead
-# insert -lpgport_shlib, to get port files that are built correctly.
+# matter.) Note that we filter out -lpgcommon and -lpgport from LIBS and
+# instead link with -lpgcommon_shlib and -lpgport_shlib, to get object files
+# that are built correctly for use in a shlib.
+SHLIB_LINK_INTERNAL = -lpgcommon_shlib -lpgport_shlib
ifneq ($(PORTNAME), win32)
-SHLIB_LINK += -lpgport_shlib $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi_krb5 -lgss -lgssapi -lssl -lsocket -lnsl -lresolv -lintl -lm, $(LIBS)) $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi_krb5 -lgss -lgssapi -lssl -lsocket -lnsl -lresolv -lintl -lm, $(LIBS)) $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
else
-SHLIB_LINK += -lpgport_shlib $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi32 -lssl -lsocket -lnsl -lresolv -lintl -lm $(PTHREAD_LIBS), $(LIBS)) $(LDAP_LIBS_FE)
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi32 -lssl -lsocket -lnsl -lresolv -lintl -lm $(PTHREAD_LIBS), $(LIBS)) $(LDAP_LIBS_FE)
endif
ifeq ($(PORTNAME), win32)
SHLIB_LINK += -lshell32 -lws2_32 -lsecur32 $(filter -leay32 -lssleay32 -lcomerr32 -lkrb5_32, $(LIBS))
# Instead, symlink the source files in here and build our own object files.
# When you add a file here, remember to add it in the "clean" target below.
-ip.c md5.c base64.c link-canary.c scram-common.c sha2.c sha2_openssl.c saslprep.c unicode_norm.c: % : $(top_srcdir)/src/common/%
- rm -f $@ && $(LN_S) $< .
-
encnames.c wchar.c: % : $(backend_src)/utils/mb/%
rm -f $@ && $(LN_S) $< .
rm -f $(OBJS) pthread.h libpq.rc
# Might be left over from a Win32 client-only build
rm -f pg_config_paths.h
-# Remove files we (may have) symlinked in from src/common and other places
- rm -f ip.c md5.c base64.c link-canary.c scram-common.c sha2.c sha2_openssl.c saslprep.c unicode_norm.c
+# Remove files we (may have) symlinked in from other places
rm -f encnames.c wchar.c
maintainer-clean: distclean maintainer-clean-lib
#
# libpgport_shlib.a - contains object files with FRONTEND defined,
# built suitably for use in shared libraries; for use
-# by libpq and other frontend libraries
+# by frontend libraries
#
# libpgport_srv.a - contains object files without FRONTEND defined,
# for use only by the backend
all: libpgport.a libpgport_shlib.a libpgport_srv.a
# libpgport is needed by some contrib
-# currently we don't install libpgport_shlib.a, maybe we should?
install: all installdirs
$(INSTALL_STLIB) libpgport.a '$(DESTDIR)$(libdir)/libpgport.a'
+ $(INSTALL_STLIB) libpgport_shlib.a '$(DESTDIR)$(libdir)/libpgport_shlib.a'
installdirs:
$(MKDIR_P) '$(DESTDIR)$(libdir)'
uninstall:
rm -f '$(DESTDIR)$(libdir)/libpgport.a'
+ rm -f '$(DESTDIR)$(libdir)/libpgport_shlib.a'
libpgport.a: $(OBJS)
rm -f $@
projects / postgresql / commitdiff