function run_tests()
{
- FAILURES=
- STATUS="Starting"
- print_status "Checking prerequisites"
- [ -z ${IDF_PATH} ] && echo "IDF_PATH is not set. Need path to esp-idf installation." && exit 2
-
- print_status "Cloning template from ${ESP_IDF_TEMPLATE_GIT}..."
- git clone ${ESP_IDF_TEMPLATE_GIT} template
- cd template
- git checkout ${CI_BUILD_REF_NAME} || echo "Using esp-idf-template default branch..."
-
- print_status "Updating template config..."
- make defconfig || exit $?
-
- BOOTLOADER_BINS="bootloader/bootloader.elf bootloader/bootloader.bin"
- APP_BINS="app-template.elf app-template.bin"
-
- print_status "Initial clean build"
- # if make fails here, everything fails
- make || exit $?
- # check all the expected build artifacts from the clean build
- assert_built ${APP_BINS} ${BOOTLOADER_BINS} partitions_singleapp.bin
- [ -f ${BUILD}/partition*.bin ] || failure "A partition table should have been built"
-
- print_status "Updating component source file rebuilds component"
- # touch a file & do a build
- take_build_snapshot
- touch ${IDF_PATH}/components/esp32/syscalls.c
- make || failure "Failed to partial build"
- assert_rebuilt ${APP_BINS} esp32/libesp32.a esp32/syscalls.o
- assert_not_rebuilt lwip/liblwip.a freertos/libfreertos.a ${BOOTLOADER_BINS} partitions_singleapp.bin
-
- print_status "Bootloader source file rebuilds bootloader"
- take_build_snapshot
- touch ${IDF_PATH}/components/bootloader/src/main/bootloader_start.c
- make bootloader || failure "Failed to partial build bootloader"
- assert_rebuilt ${BOOTLOADER_BINS} bootloader/main/bootloader_start.o
- assert_not_rebuilt ${APP_BINS} partitions_singleapp.bin
-
- print_status "Partition CSV file rebuilds partitions"
- take_build_snapshot
- touch ${IDF_PATH}/components/partition_table/partitions_singleapp.csv
- make partition_table || failure "Failed to build partition table"
- assert_rebuilt partitions_singleapp.bin
- assert_not_rebuilt app-template.bin app-template.elf ${BOOTLOADER_BINS}
-
- print_status "Partial build doesn't compile anything by default"
- take_build_snapshot
- # verify no build files are refreshed by a partial make
- ALL_BUILD_FILES=$(find ${BUILD} -type f | sed "s@${BUILD}/@@")
- make || failure "Partial build failed"
- assert_not_rebuilt ${ALL_BUILD_FILES}
-
- print_status "Cleaning should remove all files from build"
- make clean || failure "Failed to make clean"
- ALL_BUILD_FILES=$(find ${BUILD} -type f)
- if [ -n "${ALL_BUILD_FILES}" ]; then
- failure "Files weren't cleaned: ${ALL_BUILD_FILES}"
- fi
-
- print_status "Moving BUILD_DIR_BASE out of tree"
- rm -rf --preserve-root ${BUILD}/*
- OUTOFTREE_BUILD=${TESTDIR}/alt_build
- make BUILD_DIR_BASE=${OUTOFTREE_BUILD} || failure "Failed to build with BUILD_DIR_BASE overriden"
- NEW_BUILD_FILES=$(find ${OUTOFREE_BUILD} -type f)
- if [ -z "${NEW_BUILD_FILES}" ]; then
- failure "No files found in new build directory!"
- fi
- DEFAULT_BUILD_FILES=$(find ${BUILD} -mindepth 1)
- if [ -n "${DEFAULT_BUILD_FILES}" ]; then
- failure "Some files were incorrectly put into the default build directory: ${DEFAULT_BUILD_FILES}"
- fi
-
- print_status "BUILD_DIR_BASE inside default build directory"
- rm -rf --preserve-root ${BUILD}/*
- make BUILD_DIR_BASE=build/subdirectory || failure "Failed to build with BUILD_DIR_BASE as subdir"
- NEW_BUILD_FILES=$(find ${BUILD}/subdirectory -type f)
- if [ -z "${NEW_BUILD_FILES}" ]; then
- failure "No files found in new build directory!"
- fi
-
- print_status "Can still clean build if all text files are CRLFs"
- make clean || failure "Unexpected failure to make clean"
- find . -exec unix2dos {} \; # CRLFify template dir
- # make a copy of esp-idf and CRLFify it
- CRLF_ESPIDF=${TESTDIR}/esp-idf-crlf
- mkdir -p ${CRLF_ESPIDF}
- cp -rv ${IDF_PATH}/* ${CRLF_ESPIDF}
- # don't CRLFify executable files, as Linux will fail to execute them
- find ${CRLF_ESPIDF} -type f ! -perm 755 -exec unix2dos {} \;
- make IDF_PATH=${CRLF_ESPIDF} || failure "Failed to build with CRLFs in source"
- # do the same checks we do for the clean build
- assert_built ${APP_BINS} ${BOOTLOADER_BINS} partitions_singleapp.bin
- [ -f ${BUILD}/partition*.bin ] || failure "A partition table should have been built in CRLF mode"
-
-
- print_status "All tests completed"
- if [ -n "${FAILURES}" ]; then
- echo "Some failures were detected:"
- echo -e "${FAILURES}"
- exit 1
- else
- echo "Build tests passed."
- fi
+ FAILURES=
+ STATUS="Starting"
+ print_status "Checking prerequisites"
+ [ -z ${IDF_PATH} ] && echo "IDF_PATH is not set. Need path to esp-idf installation." && exit 2
+
+ print_status "Cloning template from ${ESP_IDF_TEMPLATE_GIT}..."
+ git clone ${ESP_IDF_TEMPLATE_GIT} template
+ cd template
+ git checkout ${CI_BUILD_REF_NAME} || echo "Using esp-idf-template default branch..."
+
+ print_status "Updating template config..."
+ make defconfig || exit $?
+
+ BOOTLOADER_BINS="bootloader/bootloader.elf bootloader/bootloader.bin"
+ APP_BINS="app-template.elf app-template.bin"
+
+ print_status "Initial clean build"
+ # if make fails here, everything fails
+ make || exit $?
+ # check all the expected build artifacts from the clean build
+ assert_built ${APP_BINS} ${BOOTLOADER_BINS} partitions_singleapp.bin
+ [ -f ${BUILD}/partition*.bin ] || failure "A partition table should have been built"
+
+ print_status "Updating component source file rebuilds component"
+ # touch a file & do a build
+ take_build_snapshot
+ touch ${IDF_PATH}/components/esp32/syscalls.c
+ make || failure "Failed to partial build"
+ assert_rebuilt ${APP_BINS} esp32/libesp32.a esp32/syscalls.o
+ assert_not_rebuilt lwip/liblwip.a freertos/libfreertos.a ${BOOTLOADER_BINS} partitions_singleapp.bin
+
+ print_status "Bootloader source file rebuilds bootloader"
+ take_build_snapshot
+ touch ${IDF_PATH}/components/bootloader/src/main/bootloader_start.c
+ make bootloader || failure "Failed to partial build bootloader"
+ assert_rebuilt ${BOOTLOADER_BINS} bootloader/main/bootloader_start.o
+ assert_not_rebuilt ${APP_BINS} partitions_singleapp.bin
+
+ print_status "Partition CSV file rebuilds partitions"
+ take_build_snapshot
+ touch ${IDF_PATH}/components/partition_table/partitions_singleapp.csv
+ make partition_table || failure "Failed to build partition table"
+ assert_rebuilt partitions_singleapp.bin
+ assert_not_rebuilt app-template.bin app-template.elf ${BOOTLOADER_BINS}
+
+ print_status "Partial build doesn't compile anything by default"
+ take_build_snapshot
+ # verify no build files are refreshed by a partial make
+ ALL_BUILD_FILES=$(find ${BUILD} -type f | sed "s@${BUILD}/@@")
+ make || failure "Partial build failed"
+ assert_not_rebuilt ${ALL_BUILD_FILES}
+
+ print_status "Cleaning should remove all files from build"
+ make clean || failure "Failed to make clean"
+ ALL_BUILD_FILES=$(find ${BUILD} -type f)
+ if [ -n "${ALL_BUILD_FILES}" ]; then
+ failure "Files weren't cleaned: ${ALL_BUILD_FILES}"
+ fi
+
+ print_status "Moving BUILD_DIR_BASE out of tree"
+ rm -rf --preserve-root ${BUILD}/*
+ OUTOFTREE_BUILD=${TESTDIR}/alt_build
+ make BUILD_DIR_BASE=${OUTOFTREE_BUILD} || failure "Failed to build with BUILD_DIR_BASE overriden"
+ NEW_BUILD_FILES=$(find ${OUTOFREE_BUILD} -type f)
+ if [ -z "${NEW_BUILD_FILES}" ]; then
+ failure "No files found in new build directory!"
+ fi
+ DEFAULT_BUILD_FILES=$(find ${BUILD} -mindepth 1)
+ if [ -n "${DEFAULT_BUILD_FILES}" ]; then
+ failure "Some files were incorrectly put into the default build directory: ${DEFAULT_BUILD_FILES}"
+ fi
+
+ print_status "BUILD_DIR_BASE inside default build directory"
+ rm -rf --preserve-root ${BUILD}/*
+ make BUILD_DIR_BASE=build/subdirectory || failure "Failed to build with BUILD_DIR_BASE as subdir"
+ NEW_BUILD_FILES=$(find ${BUILD}/subdirectory -type f)
+ if [ -z "${NEW_BUILD_FILES}" ]; then
+ failure "No files found in new build directory!"
+ fi
+
+ print_status "Can still clean build if all text files are CRLFs"
+ make clean || failure "Unexpected failure to make clean"
+ find . -exec unix2dos {} \; # CRLFify template dir
+ # make a copy of esp-idf and CRLFify it
+ CRLF_ESPIDF=${TESTDIR}/esp-idf-crlf
+ mkdir -p ${CRLF_ESPIDF}
+ cp -rv ${IDF_PATH}/* ${CRLF_ESPIDF}
+ # don't CRLFify executable files, as Linux will fail to execute them
+ find ${CRLF_ESPIDF} -type f ! -perm 755 -exec unix2dos {} \;
+ make IDF_PATH=${CRLF_ESPIDF} || failure "Failed to build with CRLFs in source"
+ # do the same checks we do for the clean build
+ assert_built ${APP_BINS} ${BOOTLOADER_BINS} partitions_singleapp.bin
+ [ -f ${BUILD}/partition*.bin ] || failure "A partition table should have been built in CRLF mode"
+
+
+ print_status "All tests completed"
+ if [ -n "${FAILURES}" ]; then
+ echo "Some failures were detected:"
+ echo -e "${FAILURES}"
+ exit 1
+ else
+ echo "Build tests passed."
+ fi
}
function print_status()
{
- echo "******** $1"
- STATUS="$1"
+ echo "******** $1"
+ STATUS="$1"
}
function failure()
{
- echo "!!!!!!!!!!!!!!!!!!!"
- echo "FAILURE: $1"
- echo "!!!!!!!!!!!!!!!!!!!"
- FAILURES="${FAILURES}${STATUS} :: $1\n"
+ echo "!!!!!!!!!!!!!!!!!!!"
+ echo "FAILURE: $1"
+ echo "!!!!!!!!!!!!!!!!!!!"
+ FAILURES="${FAILURES}${STATUS} :: $1\n"
}
TESTDIR=${TMP}/build_system_tests_$$
# copy all the build output to a snapshot directory
function take_build_snapshot()
{
- rm -rf ${SNAPSHOT}
- cp -ap ${TESTDIR}/template/build ${SNAPSHOT}
+ rm -rf ${SNAPSHOT}
+ cp -ap ${TESTDIR}/template/build ${SNAPSHOT}
}
# verify that all the arguments are present in the build output directory
function assert_built()
{
- until [ -z "$1" ]; do
- if [ ! -f "${BUILD}/$1" ]; then
- failure "File $1 should be in the build output directory"
- fi
- shift
- done
+ until [ -z "$1" ]; do
+ if [ ! -f "${BUILD}/$1" ]; then
+ failure "File $1 should be in the build output directory"
+ fi
+ shift
+ done
}
# Test if a file has been rebuilt.
function file_was_rebuilt()
{
- # can't use [ a -ot b ] here as -ot only gives second resolution
- # but stat -c %y seems to be microsecond at least for tmpfs, ext4..
- if [ "$(stat -c %y ${SNAPSHOT}/$1)" != "$(stat -c %y ${BUILD}/$1)" ]; then
- return 0
- else
- return 1
- fi
+ # can't use [ a -ot b ] here as -ot only gives second resolution
+ # but stat -c %y seems to be microsecond at least for tmpfs, ext4..
+ if [ "$(stat -c %y ${SNAPSHOT}/$1)" != "$(stat -c %y ${BUILD}/$1)" ]; then
+ return 0
+ else
+ return 1
+ fi
}
# verify all the arguments passed in were rebuilt relative to the snapshot
function assert_rebuilt()
{
- until [ -z "$1" ]; do
- assert_built "$1"
- if [ ! -f "${SNAPSHOT}/$1" ]; then
- failure "File $1 should have been original build snapshot"
- fi
- if ! file_was_rebuilt "$1"; then
- failure "File $1 should have been rebuilt"
- fi
- shift
- done
+ until [ -z "$1" ]; do
+ assert_built "$1"
+ if [ ! -f "${SNAPSHOT}/$1" ]; then
+ failure "File $1 should have been original build snapshot"
+ fi
+ if ! file_was_rebuilt "$1"; then
+ failure "File $1 should have been rebuilt"
+ fi
+ shift
+ done
}
# verify all the arguments are in the build directory & snapshot,
# but were not rebuilt
function assert_not_rebuilt()
{
- until [ -z "$1" ]; do
- assert_built "$1"
- if [ ! -f "${SNAPSHOT}/$1" ]; then
- failure "File $1 should be in snapshot build directory"
- fi
- if file_was_rebuilt "$1"; then
- failure "File $1 should not have been rebuilt"
- fi
- shift
- done
+ until [ -z "$1" ]; do
+ assert_built "$1"
+ if [ ! -f "${SNAPSHOT}/$1" ]; then
+ failure "File $1 should be in snapshot build directory"
+ fi
+ if file_was_rebuilt "$1"; then
+ failure "File $1 should not have been rebuilt"
+ fi
+ shift
+ done
}
cd ${TESTDIR}
projects / esp-idf / commitdiff