Fix some typos related to ethernet documentation and Kconfig. Closes https://github...

diff --git a/components/ethernet/Kconfig b/components/ethernet/Kconfig
index c91ad5d5733dcd93293427602f4ec553a96aad62..4657b53d49c12c3502a75a393090487eacf188ec 100644 (file)
--- a/components/ethernet/Kconfig
+++ b/components/ethernet/Kconfig
@@ -27,7 +27,7 @@ config EMAC_L2_TO_L3_RX_BUF_MODE
         passing it from the Ethernet MAC (L2) to the IP stack (L3). Otherwise, IP stack
         will receive pointers to the DMA buffers used by Ethernet MAC.
 
-        When Ethernet MAC doesn't have any unused buffers left, it will drop incomming
+        When Ethernet MAC doesn't have any unused buffers left, it will drop incoming
         packets (flow control may help with this problem, to some extent).
 
         The buffers for the IP stack are allocated from the heap, so the total number of

diff --git a/components/ethernet/include/esp_eth.h b/components/ethernet/include/esp_eth.h
index f35bbf4dfcc05a46a8de174ee91c7b7dfc3077ec..94330594d9084d3cfedffd0f39af9d651666f4e9 100644 (file)
--- a/components/ethernet/include/esp_eth.h
+++ b/components/ethernet/include/esp_eth.h
@@ -115,7 +115,7 @@ typedef struct {
 /**
  * @brief  Init ethernet mac
  *
- * @note   config can not be NULL,and phy chip must be suitable to phy init func.
+ * @note   config can not be NULL, and phy chip must be suitable to phy init func.
  *
  * @param[in] config  mac init data.
  *
@@ -144,7 +144,7 @@ esp_err_t esp_eth_deinit(void);
  * This function may be called, if you only need to initialize the Ethernet
  * driver without having to use the network stack on top.
  *
- * @note   config can not be NULL,and phy chip must be suitable to phy init func.
+ * @note   config can not be NULL, and phy chip must be suitable to phy init func.
  * @param[in] config  mac init data.
  *
  * @return
@@ -156,7 +156,7 @@ esp_err_t esp_eth_init_internal(eth_config_t *config);
 /**
  * @brief  Send packet from tcp/ip to mac
  *
- * @note   buf can not be NULL,size must be less than 1580
+ * @note   buf can not be NULL, size must be less than 1580
  *
  * @param[in] buf:  start address of packet data.
  *
@@ -171,7 +171,7 @@ esp_err_t esp_eth_tx(uint8_t *buf, uint16_t size);
 /**
  * @brief  Enable ethernet interface
  *
- * @note   Shout be called after esp_eth_init
+ * @note   Should be called after esp_eth_init
  *
  * @return
  *      - ESP_OK
@@ -182,7 +182,7 @@ esp_err_t esp_eth_enable(void);
 /**
  * @brief  Disable ethernet interface
  *
- * @note   Shout be called after esp_eth_init
+ * @note   Should be called after esp_eth_init
  *
  * @return
  *      - ESP_OK
@@ -200,24 +200,24 @@ esp_err_t esp_eth_disable(void);
 void esp_eth_get_mac(uint8_t mac[6]);
 
 /**
- * @brief  Read phy reg with smi interface.
+ * @brief  Write PHY reg with SMI interface.
  *
- * @note  phy base addr must be right.
+ * @note  PHY base addr must be right.
  *
- * @param[in] reg_num:  phy reg num.
+ * @param[in] reg_num:  PHY reg num.
  *
- * @param[in] value: value which write to phy reg.
+ * @param[in] value: value which is written to PHY reg.
  */
 void esp_eth_smi_write(uint32_t reg_num, uint16_t value);
 
 /**
- * @brief  Read phy reg with smi interface.
+ * @brief  Read PHY reg with SMI interface.
  *
- * @note  phy base addr must be right.
+ * @note  PHY base addr must be right.
  *
- * @param[in] reg_num:  phy reg num.
+ * @param[in] reg_num:  PHY reg num.
  *
- * @return value what read from phy reg
+ * @return value that is read from PHY reg
  */
 uint16_t esp_eth_smi_read(uint32_t reg_num);
 
@@ -254,9 +254,9 @@ static inline esp_err_t esp_eth_smi_wait_set(uint32_t reg_num, uint16_t value_ma
 /**
  * @brief  Free emac rx buf.
  *
- * @note  buf can not be null,and it is tcpip input buf.
+ * @note  buf can not be null, and it is tcpip input buf.
  *
- * @param[in] buf: start address of recevie packet data.
+ * @param[in] buf: start address of received packet data.
  *
  */
 void esp_eth_free_rx_buf(void *buf);
@@ -264,7 +264,7 @@ void esp_eth_free_rx_buf(void *buf);
 /**
  * @brief  Set mac of ethernet interface.
  *
- * @note user can call this function after emac_init,and the new mac address will be enabled after emac_enable.
+ * @note user can call this function after emac_init, and the new mac address will be enabled after emac_enable.
  *
  * @param[in] mac: the Mac address.
  *

diff --git a/components/lwip/Kconfig b/components/lwip/Kconfig
index f4b0483516585fa39a74c0f84fa0747036b44cbc..f124ac0b110b232e2d0dc67d59c5ad1eac132cab 100644 (file)
--- a/components/lwip/Kconfig
+++ b/components/lwip/Kconfig
@@ -165,7 +165,7 @@ config LWIP_DHCP_RESTORE_LAST_IP
     default n
     help
         When this option is enabled, DHCP client tries to re-obtain last valid IP address obtained from DHCP server.
-        Last valid DHCP configuration is stored in nvs and restored afrer reset/power-up. If IP is still available,
+        Last valid DHCP configuration is stored in nvs and restored after reset/power-up. If IP is still available,
         there is no need for sending discovery message to DHCP server and save some time.
 
 menu "DHCP server"

diff --git a/components/mbedtls/Kconfig b/components/mbedtls/Kconfig
index aacc586eb078f8bbdbf98906df7545fb80143a20..b17a3edd7bb5a39f0e787c42909975b84c7ceaad 100644 (file)
--- a/components/mbedtls/Kconfig
+++ b/components/mbedtls/Kconfig
@@ -143,7 +143,7 @@ config MBEDTLS_HAVE_TIME
    default y
    help
        System has time.h and time().
-       The time does not need to be correct, only time differences are used,
+       The time does not need to be correct, only time differences are used.
 
 config MBEDTLS_HAVE_TIME_DATE
    bool "Enable mbedtls certificate expiry check"