docs: fix the bug in wifi doc

diff --git a/components/esp_wifi/include/esp_wifi_types.h b/components/esp_wifi/include/esp_wifi_types.h
index 57b916ec793eac9a5ace2120ec5107fb14bbba30..fea3f14676944c5e7a057775f04127f925a32209 100644 (file)
--- a/components/esp_wifi/include/esp_wifi_types.h
+++ b/components/esp_wifi/include/esp_wifi_types.h
@@ -225,7 +225,7 @@ typedef struct {
     uint8_t channel;       /**< channel of target AP. Set to 1~13 to scan starting from the specified channel before connecting to AP. If the channel of AP is unknown, set it to 0.*/
     uint16_t listen_interval;   /**< Listen interval for ESP32 station to receive beacon when WIFI_PS_MAX_MODEM is set. Units: AP beacon intervals. Defaults to 3 if set to 0. */
     wifi_sort_method_t sort_method;    /**< sort the connect AP in the list by rssi or security mode */
-    wifi_scan_threshold_t  threshold;     /**< When scan_method is set, only APs which have an auth mode that is more secure than the selected auth mode and a signal stronger than the minimum RSSI will be used. */
+    wifi_scan_threshold_t  threshold;     /**< When sort_method is set, only APs which have an auth mode that is more secure than the selected auth mode and a signal stronger than the minimum RSSI will be used. */
 } wifi_sta_config_t;
 
 /** @brief Configuration data for ESP32 AP or STA.

diff --git a/docs/en/api-guides/wifi.rst b/docs/en/api-guides/wifi.rst
index 209f272231d4828b7c5a4a0a9199b17a4595e42b..b6afd637794ab42ccbf3f38f17681b2c796828b5 100644 (file)
--- a/docs/en/api-guides/wifi.rst
+++ b/docs/en/api-guides/wifi.rst
@@ -1407,7 +1407,7 @@ In maximum power save mode, station wakes up every listen interval to receive be
 
 Call ``esp_wifi_set_ps(WIFI_PS_MIN_MODEM)`` to enable Modem-sleep minimum power save mode or ``esp_wifi_set_ps(WIFI_PS_MAX_MODEM)`` to enable Modem-sleep maximum power save mode after calling :cpp:func:`esp_wifi_init`. When station connects to AP, Modem-sleep will start. When station disconnects from AP, Modem-sleep will stop.
 
-Call `esp_wifi_set_ps(WIFI_PS_MIN_MODEM)` to disable modem sleep entirely. This has much higher power consumption, but provides minimum latency for receiving Wi-Fi data in real time. When modem sleep is enabled, received Wi-Fi data can be delayed for as long as the DTIM period (minimum power save mode) or the listen interval (maximum power save mode).
+Call ``esp_wifi_set_ps(WIFI_PS_NONE)`` to disable modem sleep entirely. This has much higher power consumption, but provides minimum latency for receiving Wi-Fi data in real time. When modem sleep is enabled, received Wi-Fi data can be delayed for as long as the DTIM period (minimum power save mode) or the listen interval (maximum power save mode).
 
 The default Modem-sleep mode is WIFI_PS_MIN_MODEM.
 
@@ -1697,7 +1697,7 @@ ESP32 supports Wi-Fi bandwidth HT20 or HT40, it doesn't support HT20/40 coexist.
 
 In station mode, the actual bandwidth is firstly negotiated during the Wi-Fi connection. It is HT40 only if both the station and the connected AP support HT40, otherwise it's HT20. If the bandwidth of connected AP is changes, the actual bandwidth is negotiated again without Wi-Fi disconnecting.
 
-Similarly, in AP mode, the actual bandwidth is negotiated between AP and the stations that connect to the AP. It's HT40 only if the AP and all the stations support HT40, otherwise it's HT40.
+Similarly, in AP mode, the actual bandwidth is negotiated between AP and the stations that connect to the AP. It's HT40 if the AP and one of the stations support HT40, otherwise it's HT20.
 
 In station/AP coexist mode, the station/AP can configure HT20/40 seperately. If both station and AP are negotiated to HT40, the HT40 channel should be the channel of station because the station always has higher priority than AP in ESP32. E.g. the configured bandwidth of AP is HT40, the configured primary channel is 6 and the configured secondary channel is 10. The station is connected to an router whose primary channel is 6 and secondary channel is 2, then the actual channel of AP is changed to primary 6 and secondary 2 automatically.