added makefiles for NetWare.

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@645930 13f79535-47bb-0310-9956-ffa450edef68

diff --git a/modules/session/NWGNUmakefile b/modules/session/NWGNUmakefile
new file mode 100644 (file)
index 0000000..53810e6
--- /dev/null
+++ b/modules/session/NWGNUmakefile
@@ -0,0 +1,248 @@
+#\r
+# Declare the sub-directories to be built here\r
+#\r
+\r
+SUBDIRS = \\r
+       $(EOLIST)\r
+\r
+#\r
+# Get the 'head' of the build environment.  This includes default targets and\r
+# paths to tools\r
+#\r
+\r
+include $(AP_WORK)\build\NWGNUhead.inc\r
+\r
+#\r
+# build this level's files\r
+\r
+#\r
+# Make sure all needed macro's are defined\r
+#\r
+\r
+#\r
+# These directories will be at the beginning of the include list, followed by\r
+# INCDIRS\r
+#\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will come after CFLAGS\r
+#\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These defines will come after DEFINES\r
+#\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will be added to the link.opt file\r
+#\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These values will be appended to the correct variables based on the value of\r
+# RELEASE\r
+#\r
+ifeq "$(RELEASE)" "debug"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "noopt"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "release"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+#\r
+# These are used by the link target if an NLM is being generated\r
+# This is used by the link 'name' directive to name the nlm.  If left blank\r
+# TARGET_nlm (see below) will be used.\r
+#\r
+NLM_NAME       =\r
+\r
+#\r
+# This is used by the link '-desc ' directive.\r
+# If left blank, NLM_NAME will be used.\r
+#\r
+NLM_DESCRIPTION        =\r
+\r
+#\r
+# This is used by the '-threadname' directive.  If left blank,\r
+# NLM_NAME Thread will be used.\r
+#\r
+NLM_THREAD_NAME        =\r
+\r
+#\r
+# If this is specified, it will override VERSION value in\r
+# $(AP_WORK)\build\NWGNUenvironment.inc\r
+#\r
+NLM_VERSION    =\r
+\r
+#\r
+# If this is specified, it will override the default of 64K\r
+#\r
+NLM_STACK_SIZE =\r
+\r
+\r
+#\r
+# If this is specified it will be used by the link '-entry' directive\r
+#\r
+NLM_ENTRY_SYM  =\r
+\r
+#\r
+# If this is specified it will be used by the link '-exit' directive\r
+#\r
+NLM_EXIT_SYM   =\r
+\r
+#\r
+# If this is specified it will be used by the link '-check' directive\r
+#\r
+NLM_CHECK_SYM  =\r
+\r
+#\r
+# If these are specified it will be used by the link '-flags' directive\r
+#\r
+NLM_FLAGS      =\r
+\r
+#\r
+# If this is specified it will be linked in with the XDCData option in the def\r
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled\r
+# by setting APACHE_UNIPROC in the environment\r
+#\r
+XDCDATA                =\r
+\r
+#\r
+# If there is an NLM target, put it here\r
+#\r
+TARGET_nlm = \\r
+       $(OBJDIR)/session.nlm \\r
+       $(OBJDIR)/session_cookie.nlm \\r
+       $(OBJDIR)/session_crypto.nlm \\r
+       $(OBJDIR)/session_dbd.nlm \\r
+       $(EOLIST)\r
+\r
+#\r
+# If there is an LIB target, put it here\r
+#\r
+TARGET_lib = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the NLM target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_nlm_objs = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the LIB files needed to create the NLM target above.\r
+# These will be added as a library command in the link.opt file.\r
+#\r
+FILES_nlm_libs = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the modules that the above NLM target depends on to load.\r
+# These will be added as a module command in the link.opt file.\r
+#\r
+FILES_nlm_modules = \\r
+       $(EOLIST)\r
+\r
+#\r
+# If the nlm has a msg file, put it's path here\r
+#\r
+FILE_nlm_msg =\r
+\r
+#\r
+# If the nlm has a hlp file put it's path here\r
+#\r
+FILE_nlm_hlp =\r
+\r
+#\r
+# If this is specified, it will override $(NWOS)\copyright.txt.\r
+#\r
+FILE_nlm_copyright =\r
+\r
+#\r
+# Any additional imports go here\r
+#\r
+FILES_nlm_Ximports = \\r
+       $(EOLIST)\r
+\r
+#\r
+# Any symbols exported to here\r
+#\r
+FILES_nlm_exports = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the LIB target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_lib_objs = \\r
+       $(EOLIST)\r
+\r
+#\r
+# implement targets and dependancies (leave this section alone)\r
+#\r
+\r
+libs :: $(OBJDIR) $(TARGET_lib)\r
+\r
+nlms :: libs $(TARGET_nlm)\r
+\r
+#\r
+# Updated this target to create necessary directories and copy files to the\r
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
+#\r
+install :: nlms FORCE\r
+       copy $(OBJDIR)\*.nlm $(INSTALL)\$(BASEDIR)\modules\*.*\r
+\r
+#\r
+# Any specialized rules here\r
+#\r
+\r
+#\r
+# Include the 'tail' makefile that has targets that depend on variables defined\r
+# in this makefile\r
+#\r
+\r
+include $(AP_WORK)\build\NWGNUtail.inc\r
+\r
+\r

diff --git a/modules/session/NWGNUsession b/modules/session/NWGNUsession
new file mode 100644 (file)
index 0000000..63c273d
--- /dev/null
+++ b/modules/session/NWGNUsession
@@ -0,0 +1,259 @@
+#\r
+# Make sure all needed macro's are defined\r
+#\r
+\r
+#\r
+# Get the 'head' of the build environment if necessary.  This includes default\r
+# targets and paths to tools\r
+#\r
+\r
+ifndef EnvironmentDefined\r
+include $(AP_WORK)\build\NWGNUhead.inc\r
+endif\r
+\r
+#\r
+# These directories will be at the beginning of the include list, followed by\r
+# INCDIRS\r
+#\r
+XINCDIRS       += \\r
+                       $(AP_WORK)/include \\r
+                       $(NWOS) \\r
+                       $(AP_WORK)/modules/http \\r
+                       $(AP_WORK)/modules/arch/netware \\r
+                       $(AP_WORK)/modules/ssl \\r
+                       $(AP_WORK)/modules/generators \\r
+                       $(APR)/include \\r
+                       $(APRUTIL)/include \\r
+                       $(APR) \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will come after CFLAGS\r
+#\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These defines will come after DEFINES\r
+#\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will be added to the link.opt file\r
+#\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These values will be appended to the correct variables based on the value of\r
+# RELEASE\r
+#\r
+ifeq "$(RELEASE)" "debug"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "noopt"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "release"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+#\r
+# These are used by the link target if an NLM is being generated\r
+# This is used by the link 'name' directive to name the nlm.  If left blank\r
+# TARGET_nlm (see below) will be used.\r
+#\r
+NLM_NAME       = session\r
+\r
+#\r
+# This is used by the link '-desc ' directive.\r
+# If left blank, NLM_NAME will be used.\r
+#\r
+NLM_DESCRIPTION        = Apache $(VERSION_STR) Session Module\r
+\r
+#\r
+# This is used by the '-threadname' directive.  If left blank,\r
+# NLM_NAME Thread will be used.\r
+#\r
+NLM_THREAD_NAME        = Session Module\r
+\r
+#\r
+# If this is specified, it will override VERSION value in\r
+# $(AP_WORK)\build\NWGNUenvironment.inc\r
+#\r
+NLM_VERSION    =\r
+\r
+#\r
+# If this is specified, it will override the default of 64K\r
+#\r
+NLM_STACK_SIZE = 8192\r
+\r
+\r
+#\r
+# If this is specified it will be used by the link '-entry' directive\r
+#\r
+NLM_ENTRY_SYM  = _LibCPrelude\r
+\r
+#\r
+# If this is specified it will be used by the link '-exit' directive\r
+#\r
+NLM_EXIT_SYM   = _LibCPostlude\r
+\r
+#\r
+# If this is specified it will be used by the link '-check' directive\r
+#\r
+NLM_CHECK_SYM  =\r
+\r
+#\r
+# If these are specified it will be used by the link '-flags' directive\r
+#\r
+NLM_FLAGS      = AUTOUNLOAD, PSEUDOPREEMPTION\r
+\r
+#\r
+# If this is specified it will be linked in with the XDCData option in the def\r
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled\r
+# by setting APACHE_UNIPROC in the environment\r
+#\r
+XDCDATA                =\r
+\r
+#\r
+# If there is an NLM target, put it here\r
+#\r
+TARGET_nlm = \\r
+       $(OBJDIR)/session.nlm \\r
+       $(EOLIST)\r
+\r
+#\r
+# If there is an LIB target, put it here\r
+#\r
+TARGET_lib = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the NLM target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_nlm_objs = \\r
+       $(OBJDIR)/mod_session.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the LIB files needed to create the NLM target above.\r
+# These will be added as a library command in the link.opt file.\r
+#\r
+FILES_nlm_libs = \\r
+       libcpre.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the modules that the above NLM target depends on to load.\r
+# These will be added as a module command in the link.opt file.\r
+#\r
+FILES_nlm_modules = \\r
+       aprlib \\r
+       libc \\r
+       $(EOLIST)\r
+\r
+#\r
+# If the nlm has a msg file, put it's path here\r
+#\r
+FILE_nlm_msg =\r
+\r
+#\r
+# If the nlm has a hlp file put it's path here\r
+#\r
+FILE_nlm_hlp =\r
+\r
+#\r
+# If this is specified, it will override $(NWOS)\copyright.txt.\r
+#\r
+FILE_nlm_copyright =\r
+\r
+#\r
+# Any additional imports go here\r
+#\r
+FILES_nlm_Ximports = \\r
+       @$(APR)/aprlib.imp \\r
+       @$(NWOS)/httpd.imp \\r
+       @libc.imp \\r
+       $(EOLIST)\r
+\r
+#\r
+# Any symbols exported to here\r
+#\r
+FILES_nlm_exports = \\r
+       session_module \\r
+       ap_hook_session_decode \\r
+       ap_hook_session_encode \\r
+       ap_hook_session_load \\r
+       ap_hook_session_save \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the LIB target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_lib_objs = \\r
+       $(EOLIST)\r
+\r
+#\r
+# implement targets and dependancies (leave this section alone)\r
+#\r
+\r
+libs :: $(OBJDIR) $(TARGET_lib)\r
+\r
+nlms :: libs $(TARGET_nlm)\r
+\r
+#\r
+# Updated this target to create necessary directories and copy files to the\r
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
+#\r
+install :: nlms FORCE\r
+\r
+#\r
+# Any specialized rules here\r
+#\r
+\r
+vpath %.c ../arch/netware\r
+\r
+#\r
+# Include the 'tail' makefile that has targets that depend on variables defined\r
+# in this makefile\r
+#\r
+\r
+include $(AP_WORK)\build\NWGNUtail.inc\r
+\r
+\r

diff --git a/modules/session/NWGNUsession_cookie b/modules/session/NWGNUsession_cookie
new file mode 100644 (file)
index 0000000..cac7fed
--- /dev/null
+++ b/modules/session/NWGNUsession_cookie
@@ -0,0 +1,258 @@
+#\r
+# Make sure all needed macro's are defined\r
+#\r
+\r
+#\r
+# Get the 'head' of the build environment if necessary.  This includes default\r
+# targets and paths to tools\r
+#\r
+\r
+ifndef EnvironmentDefined\r
+include $(AP_WORK)\build\NWGNUhead.inc\r
+endif\r
+\r
+#\r
+# These directories will be at the beginning of the include list, followed by\r
+# INCDIRS\r
+#\r
+XINCDIRS       += \\r
+                       $(AP_WORK)/include \\r
+                       $(NWOS) \\r
+                       $(AP_WORK)/modules/http \\r
+                       $(AP_WORK)/modules/arch/netware \\r
+                       $(AP_WORK)/modules/ssl \\r
+                       $(AP_WORK)/modules/generators \\r
+                       $(APR)/include \\r
+                       $(APRUTIL)/include \\r
+                       $(APR) \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will come after CFLAGS\r
+#\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These defines will come after DEFINES\r
+#\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will be added to the link.opt file\r
+#\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These values will be appended to the correct variables based on the value of\r
+# RELEASE\r
+#\r
+ifeq "$(RELEASE)" "debug"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "noopt"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "release"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+#\r
+# These are used by the link target if an NLM is being generated\r
+# This is used by the link 'name' directive to name the nlm.  If left blank\r
+# TARGET_nlm (see below) will be used.\r
+#\r
+NLM_NAME       = session_cookie\r
+\r
+#\r
+# This is used by the link '-desc ' directive.\r
+# If left blank, NLM_NAME will be used.\r
+#\r
+NLM_DESCRIPTION        = Apache $(VERSION_STR) Session Cookie Module\r
+\r
+#\r
+# This is used by the '-threadname' directive.  If left blank,\r
+# NLM_NAME Thread will be used.\r
+#\r
+NLM_THREAD_NAME        = SessionCookie Module\r
+\r
+#\r
+# If this is specified, it will override VERSION value in\r
+# $(AP_WORK)\build\NWGNUenvironment.inc\r
+#\r
+NLM_VERSION    =\r
+\r
+#\r
+# If this is specified, it will override the default of 64K\r
+#\r
+NLM_STACK_SIZE = 8192\r
+\r
+\r
+#\r
+# If this is specified it will be used by the link '-entry' directive\r
+#\r
+NLM_ENTRY_SYM  = _LibCPrelude\r
+\r
+#\r
+# If this is specified it will be used by the link '-exit' directive\r
+#\r
+NLM_EXIT_SYM   = _LibCPostlude\r
+\r
+#\r
+# If this is specified it will be used by the link '-check' directive\r
+#\r
+NLM_CHECK_SYM  =\r
+\r
+#\r
+# If these are specified it will be used by the link '-flags' directive\r
+#\r
+NLM_FLAGS      = AUTOUNLOAD, PSEUDOPREEMPTION\r
+\r
+#\r
+# If this is specified it will be linked in with the XDCData option in the def\r
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled\r
+# by setting APACHE_UNIPROC in the environment\r
+#\r
+XDCDATA                =\r
+\r
+#\r
+# If there is an NLM target, put it here\r
+#\r
+TARGET_nlm = \\r
+       $(OBJDIR)/session_cookie.nlm \\r
+       $(EOLIST)\r
+\r
+#\r
+# If there is an LIB target, put it here\r
+#\r
+TARGET_lib = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the NLM target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_nlm_objs = \\r
+       $(OBJDIR)/mod_session_cookie.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the LIB files needed to create the NLM target above.\r
+# These will be added as a library command in the link.opt file.\r
+#\r
+FILES_nlm_libs = \\r
+       libcpre.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the modules that the above NLM target depends on to load.\r
+# These will be added as a module command in the link.opt file.\r
+#\r
+FILES_nlm_modules = \\r
+       aprlib \\r
+       libc \\r
+       session \\r
+       $(EOLIST)\r
+\r
+#\r
+# If the nlm has a msg file, put it's path here\r
+#\r
+FILE_nlm_msg =\r
+\r
+#\r
+# If the nlm has a hlp file put it's path here\r
+#\r
+FILE_nlm_hlp =\r
+\r
+#\r
+# If this is specified, it will override $(NWOS)\copyright.txt.\r
+#\r
+FILE_nlm_copyright =\r
+\r
+#\r
+# Any additional imports go here\r
+#\r
+FILES_nlm_Ximports = \\r
+       @$(APR)/aprlib.imp \\r
+       @$(NWOS)/httpd.imp \\r
+       @libc.imp \\r
+       ap_hook_session_load \\r
+       ap_hook_session_save \\r
+       $(EOLIST)\r
+\r
+#\r
+# Any symbols exported to here\r
+#\r
+FILES_nlm_exports = \\r
+       session_cookie_module \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the LIB target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_lib_objs = \\r
+       $(EOLIST)\r
+\r
+#\r
+# implement targets and dependancies (leave this section alone)\r
+#\r
+\r
+libs :: $(OBJDIR) $(TARGET_lib)\r
+\r
+nlms :: libs $(TARGET_nlm)\r
+\r
+#\r
+# Updated this target to create necessary directories and copy files to the\r
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
+#\r
+install :: nlms FORCE\r
+\r
+#\r
+# Any specialized rules here\r
+#\r
+\r
+vpath %.c ../arch/netware\r
+\r
+#\r
+# Include the 'tail' makefile that has targets that depend on variables defined\r
+# in this makefile\r
+#\r
+\r
+include $(AP_WORK)\build\NWGNUtail.inc\r
+\r
+\r

diff --git a/modules/session/NWGNUsession_crypto b/modules/session/NWGNUsession_crypto
new file mode 100644 (file)
index 0000000..c1d5697
--- /dev/null
+++ b/modules/session/NWGNUsession_crypto
@@ -0,0 +1,260 @@
+#\r
+# Make sure all needed macro's are defined\r
+#\r
+\r
+#\r
+# Get the 'head' of the build environment if necessary.  This includes default\r
+# targets and paths to tools\r
+#\r
+\r
+ifndef EnvironmentDefined\r
+include $(AP_WORK)\build\NWGNUhead.inc\r
+endif\r
+\r
+#\r
+# These directories will be at the beginning of the include list, followed by\r
+# INCDIRS\r
+#\r
+XINCDIRS       += \\r
+                       $(AP_WORK)/include \\r
+                       $(NWOS) \\r
+                       $(AP_WORK)/modules/http \\r
+                       $(AP_WORK)/modules/arch/netware \\r
+                       $(AP_WORK)/modules/ssl \\r
+                       $(AP_WORK)/modules/generators \\r
+                       $(APR)/include \\r
+                       $(APRUTIL)/include \\r
+                       $(APR) \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will come after CFLAGS\r
+#\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These defines will come after DEFINES\r
+#\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will be added to the link.opt file\r
+#\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These values will be appended to the correct variables based on the value of\r
+# RELEASE\r
+#\r
+ifeq "$(RELEASE)" "debug"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "noopt"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "release"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+#\r
+# These are used by the link target if an NLM is being generated\r
+# This is used by the link 'name' directive to name the nlm.  If left blank\r
+# TARGET_nlm (see below) will be used.\r
+#\r
+NLM_NAME       = session_crypto\r
+\r
+#\r
+# This is used by the link '-desc ' directive.\r
+# If left blank, NLM_NAME will be used.\r
+#\r
+NLM_DESCRIPTION        = Apache $(VERSION_STR) Session Crypto Module\r
+\r
+#\r
+# This is used by the '-threadname' directive.  If left blank,\r
+# NLM_NAME Thread will be used.\r
+#\r
+NLM_THREAD_NAME        = SessionCrypto Module\r
+\r
+#\r
+# If this is specified, it will override VERSION value in\r
+# $(AP_WORK)\build\NWGNUenvironment.inc\r
+#\r
+NLM_VERSION    =\r
+\r
+#\r
+# If this is specified, it will override the default of 64K\r
+#\r
+NLM_STACK_SIZE = 8192\r
+\r
+\r
+#\r
+# If this is specified it will be used by the link '-entry' directive\r
+#\r
+NLM_ENTRY_SYM  = _LibCPrelude\r
+\r
+#\r
+# If this is specified it will be used by the link '-exit' directive\r
+#\r
+NLM_EXIT_SYM   = _LibCPostlude\r
+\r
+#\r
+# If this is specified it will be used by the link '-check' directive\r
+#\r
+NLM_CHECK_SYM  =\r
+\r
+#\r
+# If these are specified it will be used by the link '-flags' directive\r
+#\r
+NLM_FLAGS      = AUTOUNLOAD, PSEUDOPREEMPTION\r
+\r
+#\r
+# If this is specified it will be linked in with the XDCData option in the def\r
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled\r
+# by setting APACHE_UNIPROC in the environment\r
+#\r
+XDCDATA                =\r
+\r
+#\r
+# If there is an NLM target, put it here\r
+#\r
+TARGET_nlm = \\r
+       $(OBJDIR)/session_crypto.nlm \\r
+       $(EOLIST)\r
+\r
+#\r
+# If there is an LIB target, put it here\r
+#\r
+TARGET_lib = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the NLM target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_nlm_objs = \\r
+       $(OBJDIR)/mod_session_crypto.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the LIB files needed to create the NLM target above.\r
+# These will be added as a library command in the link.opt file.\r
+#\r
+FILES_nlm_libs = \\r
+       libcpre.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the modules that the above NLM target depends on to load.\r
+# These will be added as a module command in the link.opt file.\r
+#\r
+FILES_nlm_modules = \\r
+       aprlib \\r
+       libc \\r
+       session \\r
+       $(EOLIST)\r
+\r
+#\r
+# If the nlm has a msg file, put it's path here\r
+#\r
+FILE_nlm_msg =\r
+\r
+#\r
+# If the nlm has a hlp file put it's path here\r
+#\r
+FILE_nlm_hlp =\r
+\r
+#\r
+# If this is specified, it will override $(NWOS)\copyright.txt.\r
+#\r
+FILE_nlm_copyright =\r
+\r
+#\r
+# Any additional imports go here\r
+#\r
+FILES_nlm_Ximports = \\r
+       @$(APR)/aprlib.imp \\r
+       @$(NWOS)/httpd.imp \\r
+       @libc.imp \\r
+       ap_hook_session_decode \\r
+       ap_hook_session_encode \\r
+       ap_hook_session_load \\r
+       ap_hook_session_save \\r
+       $(EOLIST)\r
+\r
+#\r
+# Any symbols exported to here\r
+#\r
+FILES_nlm_exports = \\r
+       session_crypto_module \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the LIB target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_lib_objs = \\r
+       $(EOLIST)\r
+\r
+#\r
+# implement targets and dependancies (leave this section alone)\r
+#\r
+\r
+libs :: $(OBJDIR) $(TARGET_lib)\r
+\r
+nlms :: libs $(TARGET_nlm)\r
+\r
+#\r
+# Updated this target to create necessary directories and copy files to the\r
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
+#\r
+install :: nlms FORCE\r
+\r
+#\r
+# Any specialized rules here\r
+#\r
+\r
+vpath %.c ../arch/netware\r
+\r
+#\r
+# Include the 'tail' makefile that has targets that depend on variables defined\r
+# in this makefile\r
+#\r
+\r
+include $(AP_WORK)\build\NWGNUtail.inc\r
+\r
+\r

diff --git a/modules/session/NWGNUsession_dbd b/modules/session/NWGNUsession_dbd
new file mode 100644 (file)
index 0000000..183b6e3
--- /dev/null
+++ b/modules/session/NWGNUsession_dbd
@@ -0,0 +1,260 @@
+#\r
+# Make sure all needed macro's are defined\r
+#\r
+\r
+#\r
+# Get the 'head' of the build environment if necessary.  This includes default\r
+# targets and paths to tools\r
+#\r
+\r
+ifndef EnvironmentDefined\r
+include $(AP_WORK)\build\NWGNUhead.inc\r
+endif\r
+\r
+#\r
+# These directories will be at the beginning of the include list, followed by\r
+# INCDIRS\r
+#\r
+XINCDIRS       += \\r
+                       $(AP_WORK)/include \\r
+                       $(NWOS) \\r
+                       $(AP_WORK)/modules/http \\r
+                       $(AP_WORK)/modules/arch/netware \\r
+                       $(AP_WORK)/modules/database \\r
+                       $(AP_WORK)/modules/ssl \\r
+                       $(AP_WORK)/modules/generators \\r
+                       $(AP_WORK)/server/mpm/netware \\r
+                       $(APR)/include \\r
+                       $(APRUTIL)/include \\r
+                       $(APR) \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will come after CFLAGS\r
+#\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These defines will come after DEFINES\r
+#\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These flags will be added to the link.opt file\r
+#\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+#\r
+# These values will be appended to the correct variables based on the value of\r
+# RELEASE\r
+#\r
+ifeq "$(RELEASE)" "debug"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "noopt"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+ifeq "$(RELEASE)" "release"\r
+XINCDIRS       += \\r
+                       $(EOLIST)\r
+\r
+XCFLAGS                += \\r
+                       $(EOLIST)\r
+\r
+XDEFINES       += \\r
+                       $(EOLIST)\r
+\r
+XLFLAGS                += \\r
+                       $(EOLIST)\r
+endif\r
+\r
+#\r
+# These are used by the link target if an NLM is being generated\r
+# This is used by the link 'name' directive to name the nlm.  If left blank\r
+# TARGET_nlm (see below) will be used.\r
+#\r
+NLM_NAME       = session_dbd\r
+\r
+#\r
+# This is used by the link '-desc ' directive.\r
+# If left blank, NLM_NAME will be used.\r
+#\r
+NLM_DESCRIPTION        = Apache $(VERSION_STR) Session Cookie Module\r
+\r
+#\r
+# This is used by the '-threadname' directive.  If left blank,\r
+# NLM_NAME Thread will be used.\r
+#\r
+NLM_THREAD_NAME        = SessionDbd Module\r
+\r
+#\r
+# If this is specified, it will override VERSION value in\r
+# $(AP_WORK)\build\NWGNUenvironment.inc\r
+#\r
+NLM_VERSION    =\r
+\r
+#\r
+# If this is specified, it will override the default of 64K\r
+#\r
+NLM_STACK_SIZE = 8192\r
+\r
+\r
+#\r
+# If this is specified it will be used by the link '-entry' directive\r
+#\r
+NLM_ENTRY_SYM  = _LibCPrelude\r
+\r
+#\r
+# If this is specified it will be used by the link '-exit' directive\r
+#\r
+NLM_EXIT_SYM   = _LibCPostlude\r
+\r
+#\r
+# If this is specified it will be used by the link '-check' directive\r
+#\r
+NLM_CHECK_SYM  =\r
+\r
+#\r
+# If these are specified it will be used by the link '-flags' directive\r
+#\r
+NLM_FLAGS      = AUTOUNLOAD, PSEUDOPREEMPTION\r
+\r
+#\r
+# If this is specified it will be linked in with the XDCData option in the def\r
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled\r
+# by setting APACHE_UNIPROC in the environment\r
+#\r
+XDCDATA                =\r
+\r
+#\r
+# If there is an NLM target, put it here\r
+#\r
+TARGET_nlm = \\r
+       $(OBJDIR)/session_dbd.nlm \\r
+       $(EOLIST)\r
+\r
+#\r
+# If there is an LIB target, put it here\r
+#\r
+TARGET_lib = \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the NLM target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_nlm_objs = \\r
+       $(OBJDIR)/mod_session_dbd.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the LIB files needed to create the NLM target above.\r
+# These will be added as a library command in the link.opt file.\r
+#\r
+FILES_nlm_libs = \\r
+       libcpre.o \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the modules that the above NLM target depends on to load.\r
+# These will be added as a module command in the link.opt file.\r
+#\r
+FILES_nlm_modules = \\r
+       aprlib \\r
+       libc \\r
+       session \\r
+       $(EOLIST)\r
+\r
+#\r
+# If the nlm has a msg file, put it's path here\r
+#\r
+FILE_nlm_msg =\r
+\r
+#\r
+# If the nlm has a hlp file put it's path here\r
+#\r
+FILE_nlm_hlp =\r
+\r
+#\r
+# If this is specified, it will override $(NWOS)\copyright.txt.\r
+#\r
+FILE_nlm_copyright =\r
+\r
+#\r
+# Any additional imports go here\r
+#\r
+FILES_nlm_Ximports = \\r
+       @$(APR)/aprlib.imp \\r
+       @$(NWOS)/httpd.imp \\r
+       @libc.imp \\r
+       ap_hook_session_load \\r
+       ap_hook_session_save \\r
+       $(EOLIST)\r
+\r
+#\r
+# Any symbols exported to here\r
+#\r
+FILES_nlm_exports = \\r
+       session_dbd_module \\r
+       $(EOLIST)\r
+\r
+#\r
+# These are the OBJ files needed to create the LIB target above.\r
+# Paths must all use the '/' character\r
+#\r
+FILES_lib_objs = \\r
+       $(EOLIST)\r
+\r
+#\r
+# implement targets and dependancies (leave this section alone)\r
+#\r
+\r
+libs :: $(OBJDIR) $(TARGET_lib)\r
+\r
+nlms :: libs $(TARGET_nlm)\r
+\r
+#\r
+# Updated this target to create necessary directories and copy files to the\r
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
+#\r
+install :: nlms FORCE\r
+\r
+#\r
+# Any specialized rules here\r
+#\r
+\r
+vpath %.c ../arch/netware\r
+\r
+#\r
+# Include the 'tail' makefile that has targets that depend on variables defined\r
+# in this makefile\r
+#\r
+\r
+include $(AP_WORK)\build\NWGNUtail.inc\r
+\r
+\r