- PostgreSQL Installation Instructions
-
-This document describes the installation of PostgreSQL from the source code
-distribution.
-
--------------------------------------------------------------------------------
-
- Short Version
-
- ./configure
- gmake
- su
- gmake install
- adduser postgres
- mkdir /usr/local/pgsql/data
- chown postgres /usr/local/pgsql/data
- su - postgres
- /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
- /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 &
- /usr/local/pgsql/bin/createdb test
- /usr/local/pgsql/bin/psql test
-
-The long version is the rest of this document.
-
--------------------------------------------------------------------------------
-
- Requirements
-
-In general, a modern Unix-compatible platform should be able to run PostgreSQL.
-The platforms that had received specific testing at the time of release are
-listed in the Section called Supported Platforms below. In the "doc"
-subdirectory of the distribution there are several platform-specific FAQ
-documents you might wish to consult if you are having trouble.
-The following software packages are required for building PostgreSQL:
-
- * GNU make is required; other make programs will *not* work. GNU make is
- often installed under the name "gmake"; this document will always refer
- to it by that name. (On some systems GNU make is the default tool with
- the name "make".) To test for GNU make enter
-
- gmake --version
-
- It is recommended to use version 3.76.1 or later.
-
- * You need an ISO/ANSI C compiler. Recent versions of GCC are
- recommendable, but PostgreSQL is known to build with a wide variety of
- compilers from different vendors.
-
- * gzip is needed to unpack the distribution in the first place. If you are
- reading this, you probably already got past that hurdle.
-
- * The GNU Readline library (for comfortable line editing and command
- history retrieval) will be used by default. If you don't want to use it
- then you must specify the "--without-readline" option for "configure".
- (On NetBSD, the "libedit" library is readline-compatible and is used if
- "libreadline" is not found.)
-
- * To build on Windows NT or Windows 2000 you need the Cygwin and cygipc
- packages. See the file "doc/FAQ_MSWIN" for details.
-
-The following packages are optional. They are not required in the default
-configuration, but they are needed when certain build options are enabled, as
-explained below.
-
- * To build the server programming language PL/Perl you need a full Perl
- installation, including the "libperl" library and the header files. Since
- PL/Perl will be a shared library, the "libperl" library must be a shared
- library also on most platforms. This appears to be the default in recent
- Perl versions, but it was not in earlier versions, and in general it is
- the choice of whomever installed Perl at your site.
- If you don't have the shared library but you need one, a message like
- this will appear during the build to point out this fact:
-
- *** Cannot build PL/Perl because libperl is not a shared library.
- *** You might have to rebuild your Perl installation. Refer to
- *** the documentation for details.
-
- (If you don't follow the on-screen output you will merely notice that the
- PL/Perl library object, "plperl.so" or similar, will not be installed.)
- If you see this, you will have to rebuild and install Perl manually to be
- able to build PL/Perl. During the configuration process for Perl, request
- a shared library.
-
- * To build the Python interface module or the PL/Python server programming
- language, you need a Python installation, including the header files.
- Since PL/Python will be a shared library, the "libpython" library must be
- a shared library also on most platforms. This is not the case in a
- default Python installation.
- If after building and installing you have a file called "plpython.so"
- (possibly a different extension), then everything went well. Otherwise
- you should have seen a notice like this flying by:
-
- *** Cannot build PL/Python because libpython is not a shared library.
- *** You might have to rebuild your Python installation. Refer to
- *** the documentation for details.
-
- That means you have to rebuild (part of) your Python installation to
- supply this shared library.
- The catch is that the Python distribution or the Python maintainers do
- not provide any direct way to do this. The closest thing we can offer you
- is the information in Python FAQ 3.30. On some operating systems you
- don't really have to build a shared library, but then you will have to
- convince the PostgreSQL build system of this. Consult the "Makefile" in
- the "src/pl/plpython" directory for details.
-
- * If you want to build Tcl or Tk components (clients and the PL/Tcl
- language) you of course need a Tcl installation.
-
- * To build the JDBC driver, you need Ant 1.5 or higher and a JDK. Ant is a
- special tool for building Java-based packages. It can be downloaded from
- the Ant web site.
- If you have several Java compilers installed, it depends on the Ant
- configuration which one gets used. Precompiled Ant distributions are
- typically set up to read a file ".antrc" in the current user's home
- directory for configuration. For example, to use a different JDK than the
- default, this may work:
-
- JAVA_HOME=/usr/local/sun-jdk1.3
- JAVACMD=$JAVA_HOME/bin/java
-
- Note: Do not try to build the driver by calling "ant" or even
- "javac" directly. This will not work. Run "gmake" normally as
- described below.
-
- * To enable Native Language Support (NLS), that is, the ability to display
- a program's messages in a language other than English, you need an
- implementation of the Gettext API. Some operating systems have this
- built-in (e.g., Linux, NetBSD, Solaris), for other systems you can
- download an add-on package from here: http://www.postgresql.org/~petere/
- gettext.html. If you are using the gettext implementation in the GNU C
- library then you will additionally need the GNU Gettext package for some
- utility programs. For any of the other implementations you will not need
- it.
-
- * Kerberos, OpenSSL, or PAM, if you want to support authentication using
- these services.
-
-If you are build from a CVS tree instead of using a released source package, or
-if you want to do development, you also need the following packages:
-
- * Flex and Bison are needed to build a CVS checkout or if you changed the
- actual scanner and parser definition files. If you need them, be sure to
- get Flex 2.5.4 or later and Bison 1.50 or later. Other yacc programs can
- sometimes be used, but doing so requires extra effort and is not
- recommended. Other lex programs will definitely not work.
-
-If you need to get a GNU package, you can find it at your local GNU mirror site
-(see http://www.gnu.org/order/ftp.html for a list) or at ftp://ftp.gnu.org/
-gnu/.
-Also check that you have sufficient disk space. You will need about 65 MB for
-the source tree during compilation and about 15 MB for the installation
-directory. An empty database cluster takes about 25 MB, databases take about
-five times the amount of space that a flat text file with the same data would
-take. If you are going to run the regression tests you will temporarily need up
-to an extra 90 MB. Use the "df" command to check for disk space.
-
--------------------------------------------------------------------------------
-
- If You Are Upgrading
-
-The internal data storage format changes with new releases of PostgreSQL.
-Therefore, if you are upgrading an existing installation that does not have a
-version number "7.3.x", you must back up and restore your data as shown here.
-These instructions assume that your existing installation is under the "/usr/
-local/pgsql" directory, and that the data area is in "/usr/local/pgsql/data".
-Substitute your paths appropriately.
-
- 1. Make sure that your database is not updated during or after the backup.
- This does not affect the integrity of the backup, but the changed data
- would of course not be included. If necessary, edit the permissions in
- the file "/usr/local/pgsql/data/pg_hba.conf" (or equivalent) to disallow
- access from everyone except you.
-
- 2. To back up your database installation, type:
-
- pg_dumpall > outputfile
-
- If you need to preserve OIDs (such as when using them as foreign keys),
- then use the "-o" option when running "pg_dumpall".
- "pg_dumpall" does not save large objects. Check the Administrator's Guide
- if you need to do this.
- To make the backup, you can use the "pg_dumpall" command from the version
- you are currently running. For best results, however, try to use the
- "pg_dumpall" command from PostgreSQL 7.3, since this version contains
- bug fixes and improvements over older versions. While this advice might
- seem idiosyncratic since you haven't installed the new version yet, it is
- advisable to follow it if you plan to install the new version in parallel
- with the old version. In that case you can complete the installation
- normally and transfer the data later. This will also decrease the
- downtime.
-
- 3. If you are installing the new version at the same location as the old one
- then shut down the old server, at the latest before you install the new
- files:
-
- kill -INT `cat /usr/local/pgsql/data/postmaster.pid`
-
- Versions prior to 7.0 do not have this "postmaster.pid" file. If you are
- using such a version you must find out the process id of the server
- yourself, for example by typing "ps ax | grep postmaster", and supply it
- to the "kill" command.
- On systems that have PostgreSQL started at boot time, there is probably a
- start-up file that will accomplish the same thing. For example, on a Red
- Hat Linux system one might find that
-
- /etc/rc.d/init.d/postgresql stop
-
- works. Another possibility is "pg_ctl stop".
-
- 4. If you are installing in the same place as the old version then it is
- also a good idea to move the old installation out of the way, in case you
- have trouble and need to revert to it. Use a command like this:
-
- mv /usr/local/pgsql /usr/local/pgsql.old
-
-After you have installed PostgreSQL 7.3, create a new database directory and
-start the new server. Remember that you must execute these commands while
-logged in to the special database user account (which you already have if you
-are upgrading).
-
- /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
- /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data
-
-Finally, restore your data with
-
- /usr/local/pgsql/bin/psql -d template1 -f outputfile
-
-using the *new* psql.
-These topics are discussed at length in the Administrator's Guide, which you
-are encouraged to read in any case.
-
--------------------------------------------------------------------------------
-
- Installation Procedure
-
- 1. Configuration
- The first step of the installation procedure is to configure the source
- tree for your system and choose the options you would like. This is done
- by running the "configure" script. For a default installation simply
- enter
-
- ./configure
-
- This script will run a number of tests to guess values for various system
- dependent variables and detect some quirks of your operating system, and
- finally will create several files in the build tree to record what it
- found. (You can also run "configure" in a directory outside the source
- tree if you want to keep the build directory separate.)
- The default configuration will build the server and utilities, as well as
- all client applications and interfaces that require only a C compiler.
- All files will be installed under "/usr/local/pgsql" by default.
- You can customize the build and installation process by supplying one or
- more of the following command line options to "configure":
-
+ PostgreSQL Installation Instructions
+
+ This document describes the installation of PostgreSQL from the source
+ code distribution.
+ _________________________________________________________________
+
+ Short Version
+
+./configure
+gmake
+su
+gmake install
+adduser postgres
+mkdir /usr/local/pgsql/data
+chown postgres /usr/local/pgsql/data
+su - postgres
+/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
+/usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data >logfile 2>&1 &
+/usr/local/pgsql/bin/createdb test
+/usr/local/pgsql/bin/psql test
+
+ The long version is the rest of this document.
+ _________________________________________________________________
+
+ Requirements
+
+ In general, a modern Unix-compatible platform should be able to run
+ PostgreSQL. The platforms that had received specific testing at the
+ time of release are listed in the section called Supported Platforms
+ below. In the "doc" subdirectory of the distribution there are several
+ platform-specific FAQ documents you might wish to consult if you are
+ having trouble.
+
+ The following software packages are required for building PostgreSQL:
+
+ * GNU make is required; other make programs will *not* work. GNU
+ make is often installed under the name "gmake"; this document will
+ always refer to it by that name. (On some systems GNU make is the
+ default tool with the name "make".) To test for GNU make enter
+gmake --version
+ It is recommended to use version 3.76.1 or later.
+ * You need an ISO/ANSI C compiler. Recent versions of GCC are
+ recommendable, but PostgreSQL is known to build with a wide
+ variety of compilers from different vendors.
+ * gzip is needed to unpack the distribution in the first place. If
+ you are reading this, you probably already got past that hurdle.
+ * The GNU Readline library (for comfortable line editing and command
+ history retrieval) will be used by default. If you don't want to
+ use it then you must specify the "--without-readline" option for
+ "configure". (On NetBSD, the "libedit" library is
+ Readline-compatible and is used if "libreadline" is not found.)
+ * To build on Windows NT or Windows 2000 you need the Cygwin and
+ cygipc packages. See the file "doc/FAQ_MSWIN" for details.
+
+ The following packages are optional. They are not required in the
+ default configuration, but they are needed when certain build options
+ are enabled, as explained below.
+
+ * To build the server programming language PL/Perl you need a full
+ Perl installation, including the "libperl" library and the header
+ files. Since PL/Perl will be a shared library, the "libperl"
+ library must be a shared library also on most platforms. This
+ appears to be the default in recent Perl versions, but it was not
+ in earlier versions, and in general it is the choice of whomever
+ installed Perl at your site.
+ If you don't have the shared library but you need one, a message
+ like this will appear during the build to point out this fact:
+*** Cannot build PL/Perl because libperl is not a shared library.
+*** You might have to rebuild your Perl installation. Refer to
+*** the documentation for details.
+ (If you don't follow the on-screen output you will merely notice
+ that the PL/Perl library object, "plperl.so" or similar, will not
+ be installed.) If you see this, you will have to rebuild and
+ install Perl manually to be able to build PL/Perl. During the
+ configuration process for Perl, request a shared library.
+ * To build the PL/Python server programming language, you need a
+ Python installation, including the header files. Since PL/Python
+ will be a shared library, the "libpython" library must be a shared
+ library also on most platforms. This is not the case in a default
+ Python installation.
+ If after building and installing you have a file called
+ "plpython.so" (possibly a different extension), then everything
+ went well. Otherwise you should have seen a notice like this
+ flying by:
+*** Cannot build PL/Python because libpython is not a shared library.
+*** You might have to rebuild your Python installation. Refer to
+*** the documentation for details.
+ That means you have to rebuild (part of) your Python installation
+ to supply this shared library.
+ The catch is that the Python distribution or the Python
+ maintainers do not provide any direct way to do this. The closest
+ thing we can offer you is the information in Python FAQ 3.30. On
+ some operating systems you don't really have to build a shared
+ library, but then you will have to convince the PostgreSQL build
+ system of this. Consult the "Makefile" in the "src/pl/plpython"
+ directory for details.
+ * If you want to build Tcl or Tk components (clients and the PL/Tcl
+ language) you of course need a Tcl installation.
+ * To build the JDBC driver, you need Ant 1.5 or higher and a JDK.
+ Ant is a special tool for building Java-based packages. It can be
+ downloaded from the Ant web site.
+ If you have several Java compilers installed, it depends on the
+ Ant configuration which one gets used. Precompiled Ant
+ distributions are typically set up to read a file ".antrc" in the
+ current user's home directory for configuration. For example, to
+ use a different JDK than the default, this may work:
+JAVA_HOME=/usr/local/sun-jdk1.3
+JAVACMD=$JAVA_HOME/bin/java
+
+ Note: Do not try to build the driver by calling "ant" or even
+ "javac" directly. This will not work. Run "gmake" normally as
+ described below.
+ * To enable Native Language Support (NLS), that is, the ability to
+ display a program's messages in a language other than English, you
+ need an implementation of the Gettext API. Some operating systems
+ have this built-in (e.g., Linux, NetBSD, Solaris), for other
+ systems you can download an add-on package from here:
+ http://www.postgresql.org/~petere/gettext.html. If you are using
+ the Gettext implementation in the GNU C library then you will
+ additionally need the GNU Gettext package for some utility
+ programs. For any of the other implementations you will not need
+ it.
+ * Kerberos, OpenSSL, or PAM, if you want to support authentication
+ using these services.
+
+ If you are building from a CVS tree instead of using a released source
+ package, or if you want to do development, you also need the following
+ packages:
+
+ * Flex and Bison are needed to build a CVS checkout or if you
+ changed the actual scanner and parser definition files. If you
+ need them, be sure to get Flex 2.5.4 or later and Bison 1.875 or
+ later. Other yacc programs can sometimes be used, but doing so
+ requires extra effort and is not recommended. Other lex programs
+ will definitely not work.
+
+ If you need to get a GNU package, you can find it at your local GNU
+ mirror site (see http://www.gnu.org/order/ftp.html for a list) or at
+ ftp://ftp.gnu.org/gnu/.
+
+ Also check that you have sufficient disk space. You will need about 65
+ MB for the source tree during compilation and about 15 MB for the
+ installation directory. An empty database cluster takes about 25 MB,
+ databases take about five times the amount of space that a flat text
+ file with the same data would take. If you are going to run the
+ regression tests you will temporarily need up to an extra 90 MB. Use
+ the "df" command to check for disk space.
+ _________________________________________________________________
+
+ If You Are Upgrading
+
+ The internal data storage format changes with new releases of
+ PostgreSQL. Therefore, if you are upgrading an existing installation
+ that does not have a version number "7.4.x", you must back up and
+ restore your data as shown here. These instructions assume that your
+ existing installation is under the "/usr/local/pgsql" directory, and
+ that the data area is in "/usr/local/pgsql/data". Substitute your
+ paths appropriately.
+ 1. Make sure that your database is not updated during or after the
+ backup. This does not affect the integrity of the backup, but the
+ changed data would of course not be included. If necessary, edit
+ the permissions in the file "/usr/local/pgsql/data/pg_hba.conf"
+ (or equivalent) to disallow access from everyone except you.
+ 2. To back up your database installation, type:
+pg_dumpall > outputfile
+ If you need to preserve OIDs (such as when using them as foreign
+ keys), then use the "-o" option when running "pg_dumpall".
+ "pg_dumpall" does not save large objects. Check the documentation
+ if you need to do this.
+ To make the backup, you can use the "pg_dumpall" command from the
+ version you are currently running. For best results, however, try
+ to use the "pg_dumpall" command from PostgreSQL 7.4beta4, since
+ this version contains bug fixes and improvements over older
+ versions. While this advice might seem idiosyncratic since you
+ haven't installed the new version yet, it is advisable to follow
+ it if you plan to install the new version in parallel with the old
+ version. In that case you can complete the installation normally
+ and transfer the data later. This will also decrease the downtime.
+ 3. If you are installing the new version at the same location as the
+ old one then shut down the old server, at the latest before you
+ install the new files:
+kill -INT `cat /usr/local/pgsql/data/postmaster.pid`
+ Versions prior to 7.0 do not have this "postmaster.pid" file. If
+ you are using such a version you must find out the process ID of
+ the server yourself, for example by typing "ps ax | grep
+ postmaster", and supply it to the "kill" command.
+ On systems that have PostgreSQL started at boot time, there is
+ probably a start-up file that will accomplish the same thing. For
+ example, on a Red Hat Linux system one might find that
+/etc/rc.d/init.d/postgresql stop
+ works. Another possibility is "pg_ctl stop".
+ 4. If you are installing in the same place as the old version then it
+ is also a good idea to move the old installation out of the way,
+ in case you have trouble and need to revert to it. Use a command
+ like this:
+mv /usr/local/pgsql /usr/local/pgsql.old
+
+ After you have installed PostgreSQL 7.4beta4, create a new database
+ directory and start the new server. Remember that you must execute
+ these commands while logged in to the special database user account
+ (which you already have if you are upgrading).
+/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
+/usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data
+
+ Finally, restore your data with
+/usr/local/pgsql/bin/psql -d template1 -f outputfile
+
+ using the *new* psql.
+
+ These topics are discussed at length in the documentation, which you
+ are encouraged to read in any case.
+ _________________________________________________________________
+
+ Installation Procedure
+
+ 1. Configuration
+ The first step of the installation procedure is to configure the
+ source tree for your system and choose the options you would like.
+ This is done by running the "configure" script. For a default
+ installation simply enter
+./configure
+ This script will run a number of tests to guess values for various
+ system dependent variables and detect some quirks of your
+ operating system, and finally will create several files in the
+ build tree to record what it found. (You can also run "configure"
+ in a directory outside the source tree if you want to keep the
+ build directory separate.)
+ The default configuration will build the server and utilities, as
+ well as all client applications and interfaces that require only a
+ C compiler. All files will be installed under "/usr/local/pgsql"
+ by default.
+ You can customize the build and installation process by supplying
+ one or more of the following command line options to "configure":
+
--prefix=PREFIX
-
- Install all files under the directory "PREFIX" instead of "/usr/
- local/pgsql". The actual files will be installed into various
- subdirectories; no files will ever be installed directly into the
- "PREFIX" directory.
- If you have special needs, you can also customize the individual
- subdirectories with the following options.
-
+ Install all files under the directory "PREFIX" instead of
+ "/usr/local/pgsql". The actual files will be installed
+ into various subdirectories; no files will ever be
+ installed directly into the "PREFIX" directory.
+
+ If you have special needs, you can also customize the
+ individual subdirectories with the following options.
+
--exec-prefix=EXEC-PREFIX
-
- You can install architecture-dependent files under a different
- prefix, "EXEC-PREFIX", than what "PREFIX" was set to. This can be
- useful to share architecture-independent files between hosts. If
- you omit this, then "EXEC-PREFIX" is set equal to "PREFIX" and both
- architecture-dependent and independent files will be installed
- under the same tree, which is probably what you want.
-
+ You can install architecture-dependent files under a
+ different prefix, "EXEC-PREFIX", than what "PREFIX" was
+ set to. This can be useful to share
+ architecture-independent files between hosts. If you omit
+ this, then "EXEC-PREFIX" is set equal to "PREFIX" and
+ both architecture-dependent and independent files will be
+ installed under the same tree, which is probably what you
+ want.
+
--bindir=DIRECTORY
-
- Specifies the directory for executable programs. The default is
- "EXEC-PREFIX/bin", which normally means "/usr/local/pgsql/bin".
-
+ Specifies the directory for executable programs. The
+ default is "EXEC-PREFIX/bin", which normally means
+ "/usr/local/pgsql/bin".
+
--datadir=DIRECTORY
-
- Sets the directory for read-only data files used by the installed
- programs. The default is "PREFIX/share". Note that this has nothing
- to do with where your database files will be placed.
-
+ Sets the directory for read-only data files used by the
+ installed programs. The default is "PREFIX/share". Note
+ that this has nothing to do with where your database
+ files will be placed.
+
--sysconfdir=DIRECTORY
-
- The directory for various configuration files, "PREFIX/etc" by
- default.
-
+ The directory for various configuration files,
+ "PREFIX/etc" by default.
+
--libdir=DIRECTORY
-
- The location to install libraries and dynamically loadable modules.
- The default is "EXEC-PREFIX/lib".
-
+ The location to install libraries and dynamically
+ loadable modules. The default is "EXEC-PREFIX/lib".
+
--includedir=DIRECTORY
-
- The directory for installing C and C++ header files. The default is
- "PREFIX/include".
-
+ The directory for installing C and C++ header files. The
+ default is "PREFIX/include".
+
--docdir=DIRECTORY
-
- Documentation files, except "man" pages, will be installed into
- this directory. The default is "PREFIX/doc".
-
+ Documentation files, except "man" pages, will be
+ installed into this directory. The default is
+ "PREFIX/doc".
+
--mandir=DIRECTORY
-
- The man pages that come with PostgreSQL will be installed under
- this directory, in their respective "manx" subdirectories. The
- default is "PREFIX/man".
- Note: Care has been taken to make it possible to install
- PostgreSQL into shared installation locations (such as "/usr/
- local/include") without interfering with the namespace of the
- rest of the system. First, the string "/postgresql" is
- automatically appended to datadir, sysconfdir, and docdir,
- unless the fully expanded directory name already contains the
- string "postgres" or "pgsql". For example, if you choose "/usr/
- local" as prefix, the documentation will be installed in "/usr/
- local/doc/postgresql", but if the prefix is "/opt/postgres",
- then it will be in "/opt/postgres/doc". The public C header
- files of the client interfaces are installed into includedir
- and are namespace-clean. The internal header files and the
- server header files are installed into private directories
- under includedir. See the Programmer's Guide for information
- about how to get at the header files for each interface.
- Finally, a private subdirectory will also be created, if
- appropriate, under libdir for dynamically loadable modules.
-
+ The man pages that come with PostgreSQL will be installed
+ under this directory, in their respective "manx"
+ subdirectories. The default is "PREFIX/man".
+
+ Note: Care has been taken to make it possible to install PostgreSQL
+ into shared installation locations (such as "/usr/local/include")
+ without interfering with the namespace of the rest of the system.
+ First, the string "/postgresql" is automatically appended to
+ datadir, sysconfdir, and docdir, unless the fully expanded
+ directory name already contains the string "postgres" or "pgsql".
+ For example, if you choose "/usr/local" as prefix, the
+ documentation will be installed in "/usr/local/doc/postgresql", but
+ if the prefix is "/opt/postgres", then it will be in
+ "/opt/postgres/doc". The public C header files of the client
+ interfaces are installed into includedir and are namespace-clean.
+ The internal header files and the server header files are installed
+ into private directories under includedir. See the documentation of
+ each interface for information about how to get at the its header
+ files. Finally, a private subdirectory will also be created, if
+ appropriate, under libdir for dynamically loadable modules.
+
--with-includes=DIRECTORIES
-
- "DIRECTORIES" is a colon-separated list of directories that will be
- added to the list the compiler searches for header files. If you
- have optional packages (such as GNU Readline) installed in a non-
- standard location, you have to use this option and probably also
- the corresponding "--with-libraries" option.
- Example: --with-includes=/opt/gnu/include:/usr/sup/include.
-
+ "DIRECTORIES" is a colon-separated list of directories
+ that will be added to the list the compiler searches for
+ header files. If you have optional packages (such as GNU
+ Readline) installed in a non-standard location, you have
+ to use this option and probably also the corresponding
+ "--with-libraries" option.
+
+ Example:
+ --with-includes=/opt/gnu/include:/usr/sup/include.
+
--with-libraries=DIRECTORIES
-
- "DIRECTORIES" is a colon-separated list of directories to search
- for libraries. You will probably have to use this option (and the
- corresponding "--with-includes" option) if you have packages
- installed in non-standard locations.
- Example: --with-libraries=/opt/gnu/lib:/usr/sup/lib.
-
+ "DIRECTORIES" is a colon-separated list of directories to
+ search for libraries. You will probably have to use this
+ option (and the corresponding "--with-includes" option)
+ if you have packages installed in non-standard locations.
+
+ Example: --with-libraries=/opt/gnu/lib:/usr/sup/lib.
+
--enable-nls[=LANGUAGES]
-
- Enables Native Language Support (NLS), that is, the ability to
- display a program's messages in a language other than English.
- "LANGUAGES" is a space separated list of codes of the languages
- that you want supported, for example --enable-nls='de fr'. (The
- intersection between your list and the set of actually provided
- translations will be computed automatically.) If you do not specify
- a list, then all available translations are installed.
- To use this option, you will need an implementation of the gettext
- API; see above.
-
+ Enables Native Language Support (NLS), that is, the
+ ability to display a program's messages in a language
+ other than English. "LANGUAGES" is a space separated list
+ of codes of the languages that you want supported, for
+ example --enable-nls='de fr'. (The intersection between
+ your list and the set of actually provided translations
+ will be computed automatically.) If you do not specify a
+ list, then all available translations are installed.
+
+ To use this option, you will need an implementation of
+ the Gettext API; see above.
+
--with-pgport=NUMBER
-
- Set "NUMBER" as the default port number for server and clients. The
- default is 5432. The port can always be changed later on, but if
- you specify it here then both server and clients will have the same
- default compiled in, which can be very convenient. Usually the only
- good reason to select a non-default value is if you intend to run
- multiple PostgreSQL servers on the same machine.
-
+ Set "NUMBER" as the default port number for server and
+ clients. The default is 5432. The port can always be
+ changed later on, but if you specify it here then both
+ server and clients will have the same default compiled
+ in, which can be very convenient. Usually the only good
+ reason to select a non-default value is if you intend to
+ run multiple PostgreSQL servers on the same machine.
+
--with-perl
-
- Build the PL/Perl server-side language.
-
+ Build the PL/Perl server-side language.
+
--with-python
-
- Build the Python interface module and the PL/Python server-side
- language. You need to have root access to be able to install the
- Python module at its default place ("/usr/lib/pythonx.y").
-
+ Build the PL/Python server-side language.
+
--with-tcl
-
- Build components that require Tcl/Tk, which are libpgtcl, pgtclsh,
- pgtksh, and PL/Tcl. But see below about "--without-tk".
-
+ Build components that require Tcl/Tk, which are libpgtcl,
+ pgtclsh, pgtksh, and PL/Tcl. But see below about
+ "--without-tk".
+
--without-tk
-
- If you specify "--with-tcl" and this option, then the program that
- requires Tk (pgtksh) will be excluded.
-
+ If you specify "--with-tcl" and this option, then the
+ program that requires Tk (pgtksh) will be excluded.
+
--with-tclconfig=DIRECTORY, --with-tkconfig=DIRECTORY
-
- Tcl/Tk installs the files "tclConfig.sh" and "tkConfig.sh", which
- contain configuration information needed to build modules
- interfacing to Tcl or Tk. These files are normally found
- automatically at their well-known locations, but if you want to use
- a different version of Tcl or Tk you can specify the directory in
- which to find them.
-
+ Tcl/Tk installs the files "tclConfig.sh" and
+ "tkConfig.sh", which contain configuration information
+ needed to build modules interfacing to Tcl or Tk. These
+ files are normally found automatically at their
+ well-known locations, but if you want to use a different
+ version of Tcl or Tk you can specify the directory in
+ which to find them.
+
--with-java
-
- Build the JDBC driver and associated Java packages.
-
+ Build the JDBC driver and associated Java packages.
+
--with-krb4[=DIRECTORY], --with-krb5[=DIRECTORY]
-
- Build with support for Kerberos authentication. You can use either
- Kerberos version 4 or 5, but not both. The "DIRECTORY" argument
- specifies the root directory of the Kerberos installation; "/usr/
- athena" is assumed as default. If the relevant header files and
- libraries are not under a common parent directory, then you must
- use the "--with-includes" and "--with-libraries" options in
- addition to this option. If, on the other hand, the required files
- are in a location that is searched by default (e.g., "/usr/lib"),
- then you can leave off the argument.
- "configure" will check for the required header files and libraries
- to make sure that your Kerberos installation is sufficient before
- proceeding.
-
+ Build with support for Kerberos authentication. You can
+ use either Kerberos version 4 or 5, but not both. The
+ "DIRECTORY" argument specifies the root directory of the
+ Kerberos installation; "/usr/athena" is assumed as
+ default. If the relevant header files and libraries are
+ not under a common parent directory, then you must use
+ the "--with-includes" and "--with-libraries" options in
+ addition to this option. If, on the other hand, the
+ required files are in a location that is searched by
+ default (e.g., "/usr/lib"), then you can leave off the
+ argument.
+
+ "configure" will check for the required header files and
+ libraries to make sure that your Kerberos installation is
+ sufficient before proceeding.
+
--with-krb-srvnam=NAME
-
- The name of the Kerberos service principal. postgres is the
- default. There's probably no reason to change this.
-
+ The name of the Kerberos service principal. postgres is
+ the default. There's probably no reason to change this.
+
--with-openssl[=DIRECTORY]
-
- Build with support for SSL (encrypted) connections. This requires
- the OpenSSL package to be installed. The "DIRECTORY" argument
- specifies the root directory of the OpenSSL installation; the
- default is "/usr/local/ssl".
- "configure" will check for the required header files and libraries
- to make sure that your OpenSSL installation is sufficient before
- proceeding.
-
+ Build with support for SSL (encrypted) connections. This
+ requires the OpenSSL package to be installed. The
+ "DIRECTORY" argument specifies the root directory of the
+ OpenSSL installation; the default is "/usr/local/ssl".
+
+ "configure" will check for the required header files and
+ libraries to make sure that your OpenSSL installation is
+ sufficient before proceeding.
+
--with-pam
-
- Build with PAM (Pluggable Authentication Modules) support.
-
+ Build with PAM (Pluggable Authentication Modules)
+ support.
+
--without-readline
-
- Prevents the use of the Readline library. This disables command-
- line editing and history in psql, so it is not recommended.
-
+ Prevents the use of the Readline library. This disables
+ command-line editing and history in psql, so it is not
+ recommended.
+
+ --with-rendezvous
+ Build with Rendezvous support.
+
+ --disable-spinlocks
+ Allows source builds to succeed without CPU spinlock
+ support. Lack of spinlock support will produce poor
+ performance. This option is to be used only by platforms
+ lacking spinlock support.
+
+ --enable-thread-safety
+ Allow separate libpq and ecpg threads to safely control
+ their private connection handles.
+
--without-zlib
-
- Prevents the use of the Zlib library. This disables compression
- support in pg_dump. This option is only intended for those rare
- systems where this library is not available.
-
+ Prevents the use of the Zlib library. This disables
+ compression support in pg_dump. This option is only
+ intended for those rare systems where this library is not
+ available.
+
--enable-debug
-
- Compiles all programs and libraries with debugging symbols. This
- means that you can run the programs through a debugger to analyze
- problems. This enlarges the size of the installed executables
- considerably, and on non-GCC compilers it usually also disables
- compiler optimization, causing slowdowns. However, having the
- symbols available is extremely helpful for dealing with any
- problems that may arise. Currently, this option is recommended for
- production installations only if you use GCC. But you should always
- have it on if you are doing development work or running a beta
- version.
-
+ Compiles all programs and libraries with debugging
+ symbols. This means that you can run the programs through
+ a debugger to analyze problems. This enlarges the size of
+ the installed executables considerably, and on non-GCC
+ compilers it usually also disables compiler optimization,
+ causing slowdowns. However, having the symbols available
+ is extremely helpful for dealing with any problems that
+ may arise. Currently, this option is recommended for
+ production installations only if you use GCC. But you
+ should always have it on if you are doing development
+ work or running a beta version.
+
--enable-cassert
-
- Enables assertion checks in the server, which test for many "can't
- happen" conditions. This is invaluable for code development
- purposes, but the tests slow things down a little. Also, having the
- tests turned on won't necessarily enhance the stability of your
- server! The assertion checks are not categorized for severity, and
- so what might be a relatively harmless bug will still lead to
- server restarts if it triggers an assertion failure. Currently,
- this option is not recommended for production use, but you should
- have it on for development work or when running a beta version.
-
+ Enables assertion checks in the server, which test for
+ many "can't happen" conditions. This is invaluable for
+ code development purposes, but the tests slow things down
+ a little. Also, having the tests turned on won't
+ necessarily enhance the stability of your server! The
+ assertion checks are not categorized for severity, and so
+ what might be a relatively harmless bug will still lead
+ to server restarts if it triggers an assertion failure.
+ Currently, this option is not recommended for production
+ use, but you should have it on for development work or
+ when running a beta version.
+
--enable-depend
-
- Enables automatic dependency tracking. With this option, the
- makefiles are set up so that all affected object files will be
- rebuilt when any header file is changed. This is useful if you are
- doing development work, but is just wasted overhead if you intend
- only to compile once and install. At present, this option will work
- only if you use GCC.
-
- If you prefer a C compiler different from the one "configure" picks then
- you can set the environment variable CC to the program of your choice. By
- default, "configure" will pick "gcc" unless this is inappropriate for the
- platform. Similarly, you can override the default compiler flags with the
- CFLAGS variable.
-
- You can specify environment variables on the "configure" command line,
- for example:
-
- ./configure CC=/opt/bin/gcc CFLAGS='-O2 -pipe'
-
- 2. Build
- To start the build, type
-
- gmake
-
- (Remember to use GNU make.) The build may take anywhere from 5 minutes to
- half an hour depending on your hardware. The last line displayed should
- be
-
- All of PostgreSQL is successfully made. Ready to install.
-
- 3. Regression Tests
- If you want to test the newly built server before you install it, you can
- run the regression tests at this point. The regression tests are a test
- suite to verify that PostgreSQL runs on your machine in the way the
- developers expected it to. Type
-
- gmake check
-
- (This won't work as root; do it as an unprivileged user.) It is possible
- that some tests fail, due to differences in error message wording or
- floating point results. The file "src/test/regress/README" and the
- Administrator's Guide contain detailed information about interpreting the
- test results. You can repeat this test at any later time by issuing the
- same command.
-
- 4. Installing The Files
- Note: If you are upgrading an existing system and are going to
- install the new files over the old ones, then you should have
- backed up your data and shut down the old server by now, as
- explained in the Section called If You Are Upgrading above.
- To install PostgreSQL enter
-
- gmake install
-
- This will install files into the directories that were specified in step
- 1. Make sure that you have appropriate permissions to write into that
- area. Normally you need to do this step as root. Alternatively, you could
- create the target directories in advance and arrange for appropriate
- permissions to be granted.
- You can use gmake install-strip instead of gmake install to strip the
- executable files and libraries as they are installed. This will save some
- space. If you built with debugging support, stripping will effectively
- remove the debugging support, so it should only be done if debugging is
- no longer needed. install-strip tries to do a reasonable job saving
- space, but it does not have perfect knowledge of how to strip every
- unneeded byte from an executable file, so if you want to save all the
- disk space you possibly can, you will have to do manual work.
- If you built the Python interfaces and you were not the root user when
- you executed the above command then that part of the installation
- probably failed. In that case you should become the root user and then do
-
- gmake -C src/interfaces/python install
-
- If you do not have superuser access you are on your own: you can still
- take the required files and place them in other directories where Python
- can find them, but how to do that is left as an exercise.
- The standard installation provides only the header files needed for
- client application development. If you plan to do any server-side program
- development (such as custom functions or data types written in C), then
- you may want to install the entire PostgreSQL include tree into your
- target include directory. To do that, enter
-
- gmake install-all-headers
-
- This adds a megabyte or two to the installation footprint, and is only
- useful if you don't plan to keep the whole source tree around for
- reference. (If you do, you can just use the source's include directory
- when building server-side software.)
- Client-only installation: If you want to install only the client
- applications and interface libraries, then you can use these commands:
-
- gmake -C src/bin install
- gmake -C src/include install
- gmake -C src/interfaces install
- gmake -C doc install
-
-Uninstallation: To undo the installation use the command "gmake uninstall".
-However, this will not remove any created directories.
-Cleaning: After the installation you can make room by removing the built files
-from the source tree with the command "gmake clean". This will preserve the
-files made by the configure program, so that you can rebuild everything with
-"gmake" later on. To reset the source tree to the state in which it was
-distributed, use "gmake distclean". If you are going to build for several
-platforms from the same source tree you must do this and re-configure for each
-build.
-If you perform a build and then discover that your configure options were
-wrong, or if you change anything that configure investigates (for example,
-software upgrades), then it's a good idea to do "gmake distclean" before
-reconfiguring and rebuilding. Without this, your changes in configuration
-choices may not propagate everywhere they need to.
-
--------------------------------------------------------------------------------
-
- Post-Installation Setup
-
-Shared Libraries
-
-On some systems that have shared libraries (which most systems do) you need to
-tell your system how to find the newly installed shared libraries. The systems
-on which this is *not* necessary include BSD/OS, FreeBSD, HP-UX, IRIX, Linux,
-NetBSD, OpenBSD, Tru64 UNIX (formerly Digital UNIX), and Solaris.
-The method to set the shared library search path varies between platforms, but
-the most widely usable method is to set the environment variable
-LD_LIBRARY_PATH like so: In Bourne shells ("sh", "ksh", "bash", "zsh")
-
- LD_LIBRARY_PATH=/usr/local/pgsql/lib
- export LD_LIBRARY_PATH
-
-or in "csh" or "tcsh"
-
- setenv LD_LIBRARY_PATH /usr/local/pgsql/lib
-
-Replace /usr/local/pgsql/lib with whatever you set "--libdir" to in step 1. You
-should put these commands into a shell start-up file such as "/etc/profile" or
-"~/.bash_profile". Some good information about the caveats associated with this
-method can be found at http://www.visi.com/~barr/ldpath.html.
-On some systems it might be preferable to set the environment variable
-LD_RUN_PATH *before* building.
-On Cygwin, put the library directory in the PATH or move the ".dll" files into
-the "bin/" directory.
-If in doubt, refer to the manual pages of your system (perhaps "ld.so" or
-"rld"). If you later on get a message like
-
- psql: error in loading shared libraries
- libpq.so.2.1: cannot open shared object file: No such file or directory
-
-then this step was necessary. Simply take care of it then.
-If you are on BSD/OS, Linux, or SunOS 4 and you have root access you can run
-
- /sbin/ldconfig /usr/local/pgsql/lib
-
-(or equivalent directory) after installation to enable the run-time linker to
-find the shared libraries faster. Refer to the manual page of "ldconfig" for
-more information. On FreeBSD, NetBSD, and OpenBSD the command is
-
- /sbin/ldconfig -m /usr/local/pgsql/lib
-
-instead. Other systems are not known to have an equivalent command.
-
--------------------------------------------------------------------------------
-
-Environment Variables
-
-If you installed into "/usr/local/pgsql" or some other location that is not
-searched for programs by default, you should add "/usr/local/pgsql/bin" (or
-whatever you set "--bindir" to in step 1) into your PATH. Strictly speaking,
-this is not necessary, but it will make the use of PostgreSQL much more
-convenient.
-To do this, add the following to your shell start-up file, such as
-"~/.bash_profile" (or "/etc/profile", if you want it to affect every user):
-
- PATH=/usr/local/pgsql/bin:$PATH
- export PATH
-
-If you are using "csh" or "tcsh", then use this command:
-
- set path = ( /usr/local/pgsql/bin $path )
-
-To enable your system to find the man documentation, you need to add a line
-like the following to a shell start-up file unless you installed into a
-location that is searched by default.
-
- MANPATH=/usr/local/pgsql/man:$MANPATH
- export MANPATH
-
-The environment variables PGHOST and PGPORT specify to client applications the
-host and port of the database server, overriding the compiled-in defaults. If
-you are going to run client applications remotely then it is convenient if
-every user that plans to use the database sets PGHOST. This is not required,
-however: the settings can be communicated via command line options to most
-client programs.
-
--------------------------------------------------------------------------------
-
- Getting Started
-
-The following is a quick summary of how to get PostgreSQL up and running once
-installed. The Administrator's Guide contains more information.
-
- 1. Create a user account for the PostgreSQL server. This is the user the
- server will run as. For production use you should create a separate,
- unprivileged account ("postgres" is commonly used). If you do not have
- root access or just want to play around, your own user account is enough,
- but running the server as root is a security risk and will not work.
-
- adduser postgres
-
- 2. Create a database installation with the "initdb" command. To run "initdb"
- you must be logged in to your PostgreSQL server account. It will not work
- as root.
-
- root# mkdir /usr/local/pgsql/data
- root# chown postgres /usr/local/pgsql/data
- root# su - postgres
- postgres$ /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
-
- The "-D" option specifies the location where the data will be stored. You
- can use any path you want, it does not have to be under the installation
- directory. Just make sure that the server account can write to the
- directory (or create it, if it doesn't already exist) before starting
- "initdb", as illustrated here.
-
- 3. The previous step should have told you how to start up the database
- server. Do so now. The command should look something like
-
- /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data
-
- This will start the server in the foreground. To put the server in the
- background use something like
-
- nohup /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data \
- </dev/null >>server.log 2>&1 </dev/null &
-
- To stop a server running in the background you can type
-
- kill `cat /usr/local/pgsql/data/postmaster.pid`
-
- In order to allow TCP/IP connections (rather than only Unix domain socket
- ones) you need to pass the "-i" option to "postmaster".
-
- 4. Create a database:
-
- createdb testdb
-
- Then enter
-
- psql testdb
-
- to connect to that database. At the prompt you can enter SQL commands and
- start experimenting.
-
--------------------------------------------------------------------------------
-
- What Now?
-
- * The PostgreSQL distribution contains a comprehensive documentation set,
- which you should read sometime. After installation, the documentation can
- be accessed by pointing your browser to "/usr/local/pgsql/doc/html/
- index.html", unless you changed the installation directories.
- The Tutorial should be your first reading if you are completely new to
- SQL databases. If you are familiar with database concepts then you want
- to proceed with the Administrator's Guide, which contains information
- about how to set up the database server, database users, and
- authentication.
-
- * Usually, you will want to modify your computer so that it will
- automatically start the database server whenever it boots. Some
- suggestions for this are in the Administrator's Guide.
-
- * Run the regression tests against the installed server (using the
- sequential test method). If you didn't run the tests before installation,
- you should definitely do it now. This is also explained in the
- Administrator's Guide.
-
--------------------------------------------------------------------------------
-
- Supported Platforms
-
-PostgreSQL has been verified by the developer community to work on the
-platforms listed below. A supported platform generally means that PostgreSQL
-builds and installs according to these instructions and that the regression
-tests pass.
- Note: If you are having problems with the installation on a supported
- platform, please write to <pgsql-bugs@postgresql.org> or <pgsql-
- ports@postgresql.org>, not to the people listed here.
- ________________________________________________________________________________
-|OS______|Processor__|Version|Reported_________________________|Remarks__________|
-|AIX |RS6000 |7.3 |2002-11-12, Andreas Zeugswetter |see also doc/ |
-|________|___________|_______|(<ZeugswetterA@spardat.at>)______|FAQ_AIX__________|
-|BSD/OS |x86 |7.3 |2002-10-25, Bruce Momjian |4.2 |
-|________|___________|_______|(<pgman@candle.pha.pa.us>)_______|_________________|
-|FreeBSD |Alpha |7.3 |2002-11-13, Chris Kings-Lynne | |
-|________|___________|_______|(<chriskl@familyhealth.com.au>)__|_________________|
-|FreeBSD |x86 |7.3 |2002-10-29, 3.3, Nigel J. Andrews| |
-| | | |(<nandrews@investsystems.co.uk>),| |
-| | | |4.7, Larry Rosenman | |
-| | | |(<ler@lerctr.org>), 5.0, Sean | |
-| | | |Chittenden | |
-|________|___________|_______|(<sean@chittenden.org>)__________|_________________|
-|HP-UX |PA-RISC |7.3 |2002-10-28, 10.20 Tom Lane |gcc and cc; see |
-| | | |(<tgl@sss.pgh.pa.us>), 11.00, |also doc/FAQ_HPUX|
-| | | |11.11, 32 & 64 bit, Giles Lean | |
-|________|___________|_______|(<giles@nemeton.com.au>)_________|_________________|
-|IRIX |MIPS |7.3 |2002-10-27, Ian Barwick |Irix64 Komma 6.5 |
-|________|___________|_______|(<barwick@gmx.net>)______________|_________________|
-|Linux |Alpha |7.3 |2002-10-28, Magnus Naeslund |2.4.19-pre6 |
-|________|___________|_______|(<mag@fbab.net>)_________________|_________________|
-|Linux |armv4l |7.2 |2001-12-10, Mark Knox |2.2.x |
-|________|___________|_______|(<segfault@hardline.org>)________|_________________|
-|Linux |MIPS |7.2 |2001-11-15, Hisao Shibuya |2.0.x; Cobalt |
-|________|___________|_______|(<shibuya@alpha.or.jp>)__________|Qube2____________|
-|Linux |PlayStation|7.2 |2001-12-12, Permaine Cheung |#undef |
-| |2 | |<pcheung@redhat.com>) |HAS_TEST_AND_SET,|
-|________|___________|_______|_________________________________|slock_t__________|
-|Linux |PPC74xx |7.3 |2002-10-26, Tom Lane |bye 2.2.18; Apple|
-|________|___________|_______|(<tgl@sss.pgh.pa.us>)____________|G3_______________|
-|Linux |S/390 |7.2 |2001-12-12, Permaine Cheung | |
-|________|___________|_______|<pcheung@redhat.com>)____________|_________________|
-|Linux |Sparc |7.3 |2002-10-26, Doug McNaught |3.0 |
-|________|___________|_______|(<doug@mcnaught.org>)____________|_________________|
-|Linux |x86 |7.3 |2002-10-26, Alvaro Herrera |2.4 |
-|________|___________|_______|(<alvherre@dcc.uchile.cl>)_______|_________________|
-|MacOS X |PPC |7.3 |2002-10-28, 10.1, Tom Lane | |
-| | | |(<tgl@sss.pgh.pa.us>), 10.2.1, | |
-| | | |Adam Witney | |
-|________|___________|_______|(<awitney@sghms.ac.uk>)__________|_________________|
-|NetBSD |Alpha |7.2 |2001-11-20, Thomas Thai |1.5W |
-|________|___________|_______|(<tom@minnesota.com>)____________|_________________|
-|NetBSD |arm32 |7.3 |2002-11-19, Patrick Welche |1.6 |
-|________|___________|_______|(<prlw1@newn.cam.ac.uk>)_________|_________________|
-|NetBSD |m68k |7.0 |2000-04-10, Henry B. Hotz |Mac 8xx |
-|________|___________|_______|(<hotz@jpl.nasa.gov>)____________|_________________|
-|NetBSD |MIPS |7.2.1 |2002-06-13, Warwick Hunter |1.5.3 |
-|________|___________|_______|(<whunter@agile.tv>)_____________|_________________|
-|NetBSD |PPC |7.2 |2001-11-28, Bill Studenmund |1.5 |
-|________|___________|_______|(<wrstuden@netbsd.org>)__________|_________________|
-|NetBSD |Sparc |7.2 |2001-12-03, Matthew Green |32- and 64-bit |
-|________|___________|_______|(<mrg@eterna.com.au>)____________|builds___________|
-|NetBSD |VAX |7.1 |2001-03-30, Tom I. Helbekkmo |1.5 |
-|________|___________|_______|(<tih@kpnQwest.no>)______________|_________________|
-|NetBSD |x86 |7.3 |2002-11-14, Patrick Welche |1.6 |
-|________|___________|_______|(<prlw1@newn.cam.ac.uk>)_________|_________________|
-|OpenBSD |Sparc |7.3 |2002-11-17, Christopher Kings- |3.2 |
-| | | |Lynne | |
-|________|___________|_______|(<chriskl@familyhealth.com.au>)__|_________________|
-|OpenBSD |x86 |7.3 |2002-11-14, 3.1 Magnus Naeslund | |
-| | | |(<mag@fbab.net>), 3.2 Christopher| |
-| | | |Kings-Lynne | |
-|________|___________|_______|(<chriskl@familyhealth.com.au>)__|_________________|
-|Solaris |Sparc |7.3 |2002-10-28, Andrew Sullivan |Solaris 7 & 8; |
-| | | |(<andrew@libertyrms.info>) |see also doc/ |
-|________|___________|_______|_________________________________|FAQ_Solaris______|
-|Solaris |x86 |7.2 |2001-11-28, Martin Renters |2.8; see also |
-|________|___________|_______|(<martin@datafax.com>)___________|doc/FAQ_Solaris__|
-|SunOS 4 |Sparc |7.2 |2001-12-04, Tatsuo Ishii (<t- | |
-|________|___________|_______|ishii@sra.co.jp>)________________|_________________|
-|Tru64 |Alpha |7.3 |2002-11-05, Alessio Bragadini | |
-|UNIX____|___________|_______|(<alessio@albourne.com>)_________|_________________|
-|UnixWare|x86 |7.3 |2002-11-01, 7.1.3 Larry Rosenman |see also doc/ |
-| | | |(<ler@lerctr.org>), 7.1.1 and |FAQ_SCO |
-| | | |7.1.2(8.0.0) Olivier Prenant | |
-|________|___________|_______|(<ohp@pyrenet.fr>)_______________|_________________|
-|Windows |x86 |7.3 |2002-10-29, Dave Page |with Cygwin; see |
-| | | |(<dpage@vale-housing.co.uk>), |doc/FAQ_MSWIN |
-| | | |Jason Tishler | |
-|________|___________|_______|(<jason@tishler.net>)____________|_________________|
-|Windows |x86 |7.3 |2002-11-05, Dave Page |native is client-|
-| | | |(<dpage@vale-housing.co.uk>) |side only; see |
-| | | | |Administrator's |
-|________|___________|_______|_________________________________|Guide____________|
-
-Unsupported Platforms: The following platforms are either known not to work, or
-they used to work in a previous release and we did not receive explicit
-confirmation of a successful test with version 7.3 at the time this list was
-compiled. We include these here to let you know that these platforms *could* be
-supported if given some attention.
- _____________________________________________________________________________
-|OS__________|Processor|Version|Reported_______________________|Remarks_______|
-|BeOS |x86 |7.2 |2001-11-29, Cyril Velter |needs updates |
-| | | |(<cyril.velter@libertysurf.fr>)|to semaphore |
-|____________|_________|_______|_______________________________|code__________|
-|DG/UX |m88k |6.3 |1998-03-01, Brian E Gallew |no recent |
-|5.4R4.11____|_________|_______|(<geek+@cmu.edu>)______________|reports_______|
-|MkLinux DR1 |PPC750 |7.0 |2001-04-03, Tatsuo Ishii (<t- |7.1 needs OS |
-|____________|_________|_______|ishii@sra.co.jp>)______________|update?_______|
-|NeXTSTEP |x86 |6.x |1998-03-01, David Wetzel |bit rot |
-|____________|_________|_______|(<dave@turbocat.de>)___________|suspected_____|
-|QNX 4 RTOS |x86 |7.2 |2001-12-10, Bernd Tegge |needs updates |
-| | | |(<tegge@repas-aeg.de>) |to semaphore |
-| | | | |code; see also|
-|____________|_________|_______|_______________________________|doc/FAQ_QNX4__|
-|QNX RTOS v6 |x86 |7.2 |2001-11-20, Igor Kovalenko |patches |
-| | | |(<Igor.Kovalenko@motorola.com>)|available in |
-| | | | |archives, but |
-| | | | |too late for |
-|____________|_________|_______|_______________________________|7.2___________|
-|SCO |x86 |6.5 |1999-05-25, Andrew Merrill |7.2 should |
-|OpenServer 5| | |(<andrew@compclass.com>) |work, but no |
-| | | | |reports; see |
-| | | | |also doc/ |
-|____________|_________|_______|_______________________________|FAQ_SCO_______|
-|System V R4 |m88k |6.2.1 |1998-03-01, Doug Winterburn |needs new TAS |
-|____________|_________|_______|(<dlw@seavme.xroads.com>)______|spinlock_code_|
-|System V R4 |MIPS |6.4 |1998-10-28, Frank Ridderbusch |no recent |
-|____________|_________|_______|(<ridderbusch.pad@sni.de>)_____|reports_______|
-|Ultrix |MIPS |7.1 |2001-03-26 |TAS spinlock |
-| | | | |code not |
-|____________|_________|_______|_______________________________|detected______|
-|Ultrix______|VAX______|6.x____|1998-03-01_____________________|______________|
-
+ Enables automatic dependency tracking. With this option,
+ the makefiles are set up so that all affected object
+ files will be rebuilt when any header file is changed.
+ This is useful if you are doing development work, but is
+ just wasted overhead if you intend only to compile once
+ and install. At present, this option will work only if
+ you use GCC.
+
+ If you prefer a C compiler different from the one "configure"
+ picks then you can set the environment variable CC to the program
+ of your choice. By default, "configure" will pick "gcc" unless
+ this is inappropriate for the platform. Similarly, you can
+ override the default compiler flags with the CFLAGS variable.
+ You can specify environment variables on the "configure" command
+ line, for example:
+./configure CC=/opt/bin/gcc CFLAGS='-O2 -pipe'
+ 2. Build
+ To start the build, type
+gmake
+ (Remember to use GNU make.) The build may take anywhere from 5
+ minutes to half an hour depending on your hardware. The last line
+ displayed should be
+All of PostgreSQL is successfully made. Ready to install.
+ 3. Regression Tests
+ If you want to test the newly built server before you install it,
+ you can run the regression tests at this point. The regression
+ tests are a test suite to verify that PostgreSQL runs on your
+ machine in the way the developers expected it to. Type
+gmake check
+ (This won't work as root; do it as an unprivileged user.) It is
+ possible that some tests fail, due to differences in error message
+ wording or floating point results. The file
+ "src/test/regress/README" and the documentation contain detailed
+ information about interpreting the test results. You can repeat
+ this test at any later time by issuing the same command.
+ 4. Installing The Files
+
+ Note: If you are upgrading an existing system and are going to
+ install the new files over the old ones, then you should have
+ backed up your data and shut down the old server by now, as
+ explained in the section called If You Are Upgrading above.
+ To install PostgreSQL enter
+gmake install
+ This will install files into the directories that were specified
+ in step 1. Make sure that you have appropriate permissions to
+ write into that area. Normally you need to do this step as root.
+ Alternatively, you could create the target directories in advance
+ and arrange for appropriate permissions to be granted.
+ You can use gmake install-strip instead of gmake install to strip
+ the executable files and libraries as they are installed. This
+ will save some space. If you built with debugging support,
+ stripping will effectively remove the debugging support, so it
+ should only be done if debugging is no longer needed.
+ install-strip tries to do a reasonable job saving space, but it
+ does not have perfect knowledge of how to strip every unneeded
+ byte from an executable file, so if you want to save all the disk
+ space you possibly can, you will have to do manual work.
+ The standard installation provides only the header files needed
+ for client application development. If you plan to do any
+ server-side program development (such as custom functions or data
+ types written in C), then you may want to install the entire
+ PostgreSQL include tree into your target include directory. To do
+ that, enter
+gmake install-all-headers
+ This adds a megabyte or two to the installation footprint, and is
+ only useful if you don't plan to keep the whole source tree around
+ for reference. (If you do, you can just use the source's include
+ directory when building server-side software.)
+ Client-only installation: If you want to install only the client
+ applications and interface libraries, then you can use these
+ commands:
+gmake -C src/bin install
+gmake -C src/include install
+gmake -C src/interfaces install
+gmake -C doc install
+
+ Uninstallation: To undo the installation use the command "gmake
+ uninstall". However, this will not remove any created directories.
+
+ Cleaning: After the installation you can make room by removing the
+ built files from the source tree with the command "gmake clean". This
+ will preserve the files made by the "configure" program, so that you
+ can rebuild everything with "gmake" later on. To reset the source tree
+ to the state in which it was distributed, use "gmake distclean". If
+ you are going to build for several platforms from the same source tree
+ you must do this and re-configure for each build.
+
+ If you perform a build and then discover that your "configure" options
+ were wrong, or if you change anything that "configure" investigates
+ (for example, software upgrades), then it's a good idea to do "gmake
+ distclean" before reconfiguring and rebuilding. Without this, your
+ changes in configuration choices may not propagate everywhere they
+ need to.
+ _________________________________________________________________
+
+ Post-Installation Setup
+
+ Tuning
+
+ By default, PostgreSQL is configured to run on minimal hardware. This
+ allows it to start up with almost any hardware configuration. However,
+ the default configuration is not designed for optimum performance. To
+ achieve optimum performance, several server variables must be
+ adjusted, the two most common being shared_buffers and sort_mem
+ mentioned in the documentation . Other parameters in the documentation
+ also affect performance.
+ _________________________________________________________________
+
+ Shared Libraries
+
+ On some systems that have shared libraries (which most systems do) you
+ need to tell your system how to find the newly installed shared
+ libraries. The systems on which this is *not* necessary include
+ BSD/OS, FreeBSD, HP-UX, IRIX, Linux, NetBSD, OpenBSD, Tru64 UNIX
+ (formerly Digital UNIX), and Solaris.
+
+ The method to set the shared library search path varies between
+ platforms, but the most widely usable method is to set the environment
+ variable LD_LIBRARY_PATH like so: In Bourne shells ("sh", "ksh",
+ "bash", "zsh")
+LD_LIBRARY_PATH=/usr/local/pgsql/lib
+export LD_LIBRARY_PATH
+
+ or in "csh" or "tcsh"
+setenv LD_LIBRARY_PATH /usr/local/pgsql/lib
+
+ Replace /usr/local/pgsql/lib with whatever you set "--libdir" to in
+ step 1. You should put these commands into a shell start-up file such
+ as "/etc/profile" or "~/.bash_profile". Some good information about
+ the caveats associated with this method can be found at
+ http://www.visi.com/~barr/ldpath.html.
+
+ On some systems it might be preferable to set the environment variable
+ LD_RUN_PATH *before* building.
+
+ On Cygwin, put the library directory in the PATH or move the ".dll"
+ files into the "bin" directory.
+
+ If in doubt, refer to the manual pages of your system (perhaps "ld.so"
+ or "rld"). If you later on get a message like
+psql: error in loading shared libraries
+libpq.so.2.1: cannot open shared object file: No such file or directory
+
+ then this step was necessary. Simply take care of it then.
+
+ If you are on BSD/OS, Linux, or SunOS 4 and you have root access you
+ can run
+/sbin/ldconfig /usr/local/pgsql/lib
+
+ (or equivalent directory) after installation to enable the run-time
+ linker to find the shared libraries faster. Refer to the manual page
+ of "ldconfig" for more information. On FreeBSD, NetBSD, and OpenBSD
+ the command is
+/sbin/ldconfig -m /usr/local/pgsql/lib
+
+ instead. Other systems are not known to have an equivalent command.
+ _________________________________________________________________
+
+ Environment Variables
+
+ If you installed into "/usr/local/pgsql" or some other location that
+ is not searched for programs by default, you should add
+ "/usr/local/pgsql/bin" (or whatever you set "--bindir" to in step 1)
+ into your PATH. Strictly speaking, this is not necessary, but it will
+ make the use of PostgreSQL much more convenient.
+
+ To do this, add the following to your shell start-up file, such as
+ "~/.bash_profile" (or "/etc/profile", if you want it to affect every
+ user):
+PATH=/usr/local/pgsql/bin:$PATH
+export PATH
+
+ If you are using "csh" or "tcsh", then use this command:
+set path = ( /usr/local/pgsql/bin $path )
+
+ To enable your system to find the man documentation, you need to add
+ lines like the following to a shell start-up file unless you installed
+ into a location that is searched by default.
+MANPATH=/usr/local/pgsql/man:$MANPATH
+export MANPATH
+
+ The environment variables PGHOST and PGPORT specify to client
+ applications the host and port of the database server, overriding the
+ compiled-in defaults. If you are going to run client applications
+ remotely then it is convenient if every user that plans to use the
+ database sets PGHOST. This is not required, however: the settings can
+ be communicated via command line options to most client programs.
+ _________________________________________________________________
+
+ Getting Started
+
+ The following is a quick summary of how to get PostgreSQL up and
+ running once installed. The main documentation contains more
+ information.
+ 1. Create a user account for the PostgreSQL server. This is the user
+ the server will run as. For production use you should create a
+ separate, unprivileged account ("postgres" is commonly used). If
+ you do not have root access or just want to play around, your own
+ user account is enough, but running the server as root is a
+ security risk and will not work.
+adduser postgres
+ 2. Create a database installation with the "initdb" command. To run
+ "initdb" you must be logged in to your PostgreSQL server account.
+ It will not work as root.
+root# mkdir /usr/local/pgsql/data
+root# chown postgres /usr/local/pgsql/data
+root# su - postgres
+postgres$ /usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
+ The "-D" option specifies the location where the data will be
+ stored. You can use any path you want, it does not have to be
+ under the installation directory. Just make sure that the server
+ account can write to the directory (or create it, if it doesn't
+ already exist) before starting "initdb", as illustrated here.
+ 3. The previous step should have told you how to start up the
+ database server. Do so now. The command should look something like
+/usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data
+ This will start the server in the foreground. To put the server in
+ the background use something like
+nohup /usr/local/pgsql/bin/postmaster -D /usr/local/pgsql/data \
+ </dev/null >>server.log 2>&1 </dev/null &
+ To stop a server running in the background you can type
+kill `cat /usr/local/pgsql/data/postmaster.pid`
+ In order to allow TCP/IP connections (rather than only Unix domain
+ socket ones) you need to pass the "-i" option to "postmaster".
+ 4. Create a database:
+createdb testdb
+ Then enter
+psql testdb
+ to connect to that database. At the prompt you can enter SQL
+ commands and start experimenting.
+ _________________________________________________________________
+
+ What Now?
+
+ * The PostgreSQL distribution contains a comprehensive documentation
+ set, which you should read sometime. After installation, the
+ documentation can be accessed by pointing your browser to
+ "/usr/local/pgsql/doc/html/index.html", unless you changed the
+ installation directories.
+ The first few chapters of the main documentation are the Tutorial,
+ which should be your first reading if you are completely new to
+ SQL databases. If you are familiar with database concepts then you
+ want to proceed with part on server administration, which contains
+ information about how to set up the database server, database
+ users, and authentication.
+ * Usually, you will want to modify your computer so that it will
+ automatically start the database server whenever it boots. Some
+ suggestions for this are in the documentation.
+ * Run the regression tests against the installed server (using the
+ sequential test method). If you didn't run the tests before
+ installation, you should definitely do it now. This is also
+ explained in the documentation.
+ _________________________________________________________________
+
+ Supported Platforms
+
+ PostgreSQL has been verified by the developer community to work on the
+ platforms listed below. A supported platform generally means that
+ PostgreSQL builds and installs according to these instructions and
+ that the regression tests pass.
+
+ Note: If you are having problems with the installation on a
+ supported platform, please write to <pgsql-bugs@postgresql.org> or
+ <pgsql-ports@postgresql.org>, not to the people listed here.
+
+ OS Processor Version Reported Remarks
+ AIX RS6000 7.3 2002-11-12, Andreas Zeugswetter
+ (<ZeugswetterA@spardat.at>) see also doc/FAQ_AIX
+ BSD/OS x86 7.3 2002-10-25, Bruce Momjian (<pgman@candle.pha.pa.us>)
+ 4.2
+ FreeBSD Alpha 7.3 2002-11-13, Chris Kings-Lynne
+ (<chriskl@familyhealth.com.au>)
+ FreeBSD x86 7.3 2002-10-29, 3.3, Nigel J. Andrews
+ (<nandrews@investsystems.co.uk>), 4.7, Larry Rosenman
+ (<ler@lerctr.org>), 5.0, Sean Chittenden (<sean@chittenden.org>)
+ HP-UX PA-RISC 7.3 2002-10-28, 10.20 Tom Lane (<tgl@sss.pgh.pa.us>),
+ 11.00, 11.11, 32 and 64 bit, Giles Lean (<giles@nemeton.com.au>) gcc
+ and cc; see also doc/FAQ_HPUX
+ IRIX MIPS 7.3 2002-10-27, Ian Barwick (<barwick@gmx.net>) Irix64 Komma
+ 6.5
+ Linux Alpha 7.3 2002-10-28, Magnus Naeslund (<mag@fbab.net>)
+ 2.4.19-pre6
+ Linux armv4l 7.2 2001-12-10, Mark Knox (<segfault@hardline.org>) 2.2.x
+ Linux MIPS 7.2 2001-11-15, Hisao Shibuya (<shibuya@alpha.or.jp>)
+ 2.0.x; Cobalt Qube2
+ Linux PlayStation 2 7.3 2002-11-19, Permaine Cheung
+ <pcheung@redhat.com>) #undef HAS_TEST_AND_SET, remove slock_t typedef
+ Linux PPC74xx 7.3 2002-10-26, Tom Lane (<tgl@sss.pgh.pa.us>) bye
+ 2.2.18; Apple G3
+ Linux S/390 7.3 2002-11-22, Permaine Cheung <pcheung@redhat.com>) both
+ s390 and s390x (32 and 64 bit)
+ Linux Sparc 7.3 2002-10-26, Doug McNaught (<doug@mcnaught.org>) 3.0
+ Linux x86 7.3 2002-10-26, Alvaro Herrera (<alvherre@dcc.uchile.cl>)
+ 2.4
+ MacOS X PPC 7.3 2002-10-28, 10.1, Tom Lane (<tgl@sss.pgh.pa.us>),
+ 10.2.1, Adam Witney (<awitney@sghms.ac.uk>)
+ NetBSD Alpha 7.2 2001-11-20, Thomas Thai (<tom@minnesota.com>) 1.5W
+ NetBSD arm32 7.3 2002-11-19, Patrick Welche (<prlw1@newn.cam.ac.uk>)
+ 1.6
+ NetBSD m68k 7.0 2000-04-10, Henry B. Hotz (<hotz@jpl.nasa.gov>) Mac
+ 8xx
+ NetBSD MIPS 7.2.1 2002-06-13, Warwick Hunter (<whunter@agile.tv>)
+ 1.5.3
+ NetBSD PPC 7.2 2001-11-28, Bill Studenmund (<wrstuden@netbsd.org>) 1.5
+ NetBSD Sparc 7.2 2001-12-03, Matthew Green (<mrg@eterna.com.au>) 32-
+ and 64-bit builds
+ NetBSD VAX 7.1 2001-03-30, Tom I. Helbekkmo (<tih@kpnQwest.no>) 1.5
+ NetBSD x86 7.3 2002-11-14, Patrick Welche (<prlw1@newn.cam.ac.uk>) 1.6
+ OpenBSD Sparc 7.3 2002-11-17, Christopher Kings-Lynne
+ (<chriskl@familyhealth.com.au>) 3.2
+ OpenBSD x86 7.3 2002-11-14, 3.1 Magnus Naeslund (<mag@fbab.net>), 3.2
+ Christopher Kings-Lynne (<chriskl@familyhealth.com.au>)
+ SCO OpenServer 5 x86 7.3.1 2002-12-11, Shibashish Satpathy
+ (<shib@postmark.net>) 5.0.4, gcc; see also doc/FAQ_SCO
+ Solaris Sparc 7.3 2002-10-28, Andrew Sullivan
+ (<andrew@libertyrms.info>) Solaris 7 and 8; see also doc/FAQ_Solaris
+ Solaris x86 7.3 2002-11-20, Martin Renters (<martin@datafax.com>) 5.8;
+ see also doc/FAQ_Solaris
+ SunOS 4 Sparc 7.2 2001-12-04, Tatsuo Ishii (<t-ishii@sra.co.jp>)
+ Tru64 UNIX Alpha 7.3 2002-11-05, Alessio Bragadini
+ (<alessio@albourne.com>)
+ UnixWare x86 7.3 2002-11-01, 7.1.3 Larry Rosenman (<ler@lerctr.org>),
+ 7.1.1 and 7.1.2(8.0.0) Olivier Prenant (<ohp@pyrenet.fr>) see also
+ doc/FAQ_SCO
+ Windows x86 7.3 2002-10-29, Dave Page (<dpage@vale-housing.co.uk>),
+ Jason Tishler (<jason@tishler.net>) with Cygwin; see doc/FAQ_MSWIN
+ Windows x86 7.3 2002-11-05, Dave Page (<dpage@vale-housing.co.uk>)
+ native is client-side only; see documentation
+
+ Unsupported Platforms: The following platforms are either known not to
+ work, or they used to work in a previous release and we did not
+ receive explicit confirmation of a successful test with version 7.4 at
+ the time this list was compiled. We include these here to let you know
+ that these platforms *could* be supported if given some attention.
+
+ OS Processor Version Reported Remarks
+ BeOS x86 7.2 2001-11-29, Cyril Velter (<cyril.velter@libertysurf.fr>)
+ needs updates to semaphore code
+ DG/UX 5.4R4.11 m88k 6.3 1998-03-01, Brian E Gallew (<geek+@cmu.edu>)
+ no recent reports
+ MkLinux DR1 PPC750 7.0 2001-04-03, Tatsuo Ishii (<t-ishii@sra.co.jp>)
+ 7.1 needs OS update?
+ NeXTSTEP x86 6.x 1998-03-01, David Wetzel (<dave@turbocat.de>) bit rot
+ suspected
+ QNX 4 RTOS x86 7.2 2001-12-10, Bernd Tegge (<tegge@repas-aeg.de>)
+ needs updates to semaphore code; see also doc/FAQ_QNX4
+ QNX RTOS v6 x86 7.2 2001-11-20, Igor Kovalenko
+ (<Igor.Kovalenko@motorola.com>) patches available in archives, but too
+ late for 7.2
+ System V R4 m88k 6.2.1 1998-03-01, Doug Winterburn
+ (<dlw@seavme.xroads.com>) needs new TAS spinlock code
+ System V R4 MIPS 6.4 1998-10-28, Frank Ridderbusch
+ (<ridderbusch.pad@sni.de>) no recent reports
+ Ultrix MIPS 7.1 2001-03-26 TAS spinlock code not detected
+ Ultrix VAX 6.x 1998-03-01