" Vim color file
" Maintainer: Bohdan Vlasyuk <bohdan@vstu.edu.ua>
-" Last Change: 2002 Mar 09
+" Last Change: 2005 Mar 28
" darkblue -- for those who prefer dark background
" [note: looks bit uglier with come terminal palettes,
hi Question guifg=green gui=none ctermfg=green cterm=none
hi NonText guifg=#0030ff ctermfg=darkblue
-hi StatusLine guifg=blue guibg=darkgray gui=none ctermfg=blue ctermbg=gray term=none cterm=none
-hi StatusLineNC guifg=black guibg=darkgray gui=none ctermfg=black ctermbg=gray term=none cterm=none
-hi VertSplit guifg=black guibg=darkgray gui=none ctermfg=black ctermbg=gray term=none cterm=none
+hi StatusLine guifg=blue guibg=darkgray gui=none ctermfg=blue ctermbg=gray term=none cterm=none
+hi StatusLineNC guifg=black guibg=darkgray gui=none ctermfg=black ctermbg=gray term=none cterm=none
+hi VertSplit guifg=black guibg=darkgray gui=none ctermfg=black ctermbg=gray term=none cterm=none
-hi Folded guifg=#808080 guibg=#000040 ctermfg=darkgrey ctermbg=black cterm=bold term=bold
-hi FoldColumn guifg=#808080 guibg=#000040 ctermfg=darkgrey ctermbg=black cterm=bold term=bold
-hi LineNr guifg=#90f020 ctermfg=green cterm=none
+hi Folded guifg=#808080 guibg=#000040 ctermfg=darkgrey ctermbg=black cterm=bold term=bold
+hi FoldColumn guifg=#808080 guibg=#000040 ctermfg=darkgrey ctermbg=black cterm=bold term=bold
+hi LineNr guifg=#90f020 ctermfg=green cterm=none
-hi DiffAdd guibg=darkblue ctermbg=darkblue term=none cterm=none
-hi DiffChange guibg=darkmagenta ctermbg=magenta cterm=none
-hi DiffDelete ctermfg=blue ctermbg=cyan gui=bold guifg=Blue guibg=DarkCyan
-hi DiffText cterm=bold ctermbg=red gui=bold guibg=Red
+hi DiffAdd guibg=darkblue ctermbg=darkblue term=none cterm=none
+hi DiffChange guibg=darkmagenta ctermbg=magenta cterm=none
+hi DiffDelete ctermfg=blue ctermbg=cyan gui=bold guifg=Blue guibg=DarkCyan
+hi DiffText cterm=bold ctermbg=red gui=bold guibg=Red
-hi Cursor guifg=#000020 guibg=#ffaf38 ctermfg=bg ctermbg=brown
-hi lCursor guifg=#ffffff guibg=#000000 ctermfg=bg ctermbg=darkgreen
+hi Cursor guifg=black guibg=yellow ctermfg=black ctermbg=yellow
+hi lCursor guifg=black guibg=white ctermfg=black ctermbg=white
-hi Comment guifg=#80a0ff ctermfg=darkred
-hi Constant ctermfg=magenta guifg=#ffa0a0 cterm=none
-hi Special ctermfg=brown guifg=Orange cterm=none gui=none
-hi Identifier ctermfg=cyan guifg=#40ffff cterm=none
-hi Statement ctermfg=yellow cterm=none guifg=#ffff60 gui=none
-hi PreProc ctermfg=magenta guifg=#ff80ff gui=none cterm=none
-hi type ctermfg=green guifg=#60ff60 gui=none cterm=none
-hi Underlined cterm=underline term=underline
-hi Ignore guifg=bg ctermfg=bg
+hi Comment guifg=#80a0ff ctermfg=darkred
+hi Constant ctermfg=magenta guifg=#ffa0a0 cterm=none
+hi Special ctermfg=brown guifg=Orange cterm=none gui=none
+hi Identifier ctermfg=cyan guifg=#40ffff cterm=none
+hi Statement ctermfg=yellow cterm=none guifg=#ffff60 gui=none
+hi PreProc ctermfg=magenta guifg=#ff80ff gui=none cterm=none
+hi type ctermfg=green guifg=#60ff60 gui=none cterm=none
+hi Underlined cterm=underline term=underline
+hi Ignore guifg=bg ctermfg=bg
-*eval.txt* For Vim version 7.0aa. Last change: 2005 Mar 25
+*eval.txt* For Vim version 7.0aa. Last change: 2005 Mar 26
VIM REFERENCE MANUAL by Bram Moolenaar
bufname() to get the name
lnum line number in the buffer (first line is 1)
col column number (first column is 1)
- vcol non-zero: column number is visual column
- zero: column number is byte index
+ vcol non-zero: "col" is visual column
+ zero: "col" is byte index
nr error number
text description of the error
type type of the error, 'E', '1', etc.
:for line in readfile(fname, '', 10)
: if line =~ 'Date' | echo line | endif
:endfor
-< When {max} is zero or negative the result is an empty list.
+< When {max} is negative -{max} lines from the end of the file
+ are returned, or as many as there are.
+ When {max} is zero the result is an empty list.
Note that without {max} the whole file is read into memory.
Also note that there is no recognition of encoding. Read a
file into a buffer if you need to.
filename name of a file
lnum line number in the file
- col column number
pattern search pattern used to locate the error
+ col column number
+ vcol when non-zero: "col" is visual column
+ when zero: "col" is byte index
+ nr error number
text description of the error
+ type single-character error type, 'E', 'W', etc.
- The "col" and "text" entries are optional. Either "lnum" or
- "pattern" entry can be used to locate a matching error line.
+ The "col", "vcol", "nr", "type" and "text" entries are
+ optional. Either "lnum" or "pattern" entry can be used to
+ locate a matching error line.
If the "filename" entry is not present or neither the "lnum"
or "pattern" entries are present, then the item will not be
handled as an error line.
-*options.txt* For Vim version 7.0aa. Last change: 2005 Mar 21
+*options.txt* For Vim version 7.0aa. Last change: 2005 Mar 28
VIM REFERENCE MANUAL by Bram Moolenaar
{not in Vi}
{only available when compiled with the |+farsi|
feature}
- When on, the second language is Farsi. In editing mode CTRL-_ toggles
+ When on, the second language is Farsi. In editing mode CTRL-_ toggles
the keyboard map between Farsi and English, when 'allowrevins' set.
- When off, the keyboard map toggles between Hebrew and English. This
+ When off, the keyboard map toggles between Hebrew and English. This
is useful to start the Vim in native mode i.e. English (left-to-right
mode) and have default second language Farsi or Hebrew (right-to-left
mode). See |farsi.txt|.
letters, Cyrillic letters).
There are currently two possible values:
- "single": Use the same width as characters in US-ASCII. This is
+ "single": Use the same width as characters in US-ASCII. This is
expected by most users.
"double": Use twice the width of ASCII characters.
those characters are solely based on how many octets they take in
legacy/traditional CJK encodings. In those encodings, Euro,
Registered sign, Greek/Cyrillic letters are represented by two octets,
- therefore those fonts have "wide" glyphs for them. This is also
+ therefore those fonts have "wide" glyphs for them. This is also
true of some line drawing characters used to make tables in text
- file. Therefore, when a CJK font is used for GUI Vim or
+ file. Therefore, when a CJK font is used for GUI Vim or
Vim is running inside a terminal (emulators) that uses a CJK font
(or Vim is run inside an xterm invoked with "-cjkwidth" option.),
this option should be set to "double" to match the width perceived
|+netbeans_intg| or |+sun_workshop| feature}
When on, Vim will change its value for the current working directory
whenever you open a file, switch buffers, delete a buffer or
- open/close a window. It will change to the directory containing the
+ open/close a window. It will change to the directory containing the
file which was opened or selected. This option is provided for
backward compatibility with the Vim released with Sun ONE Studio 4
Enterprise Edition.
The pattern is used like with |:autocmd|, see |autocmd-patterns|.
Watch out for special characters, see |option-backslash|.
When $TMPDIR, $TMP or $TEMP is not defined, it is not used for the
- default value. "/tmp/*" is only used for Unix.
+ default value. "/tmp/*" is only used for Unix.
*'balloondelay'* *'bdlay'*
'balloondelay' 'bdlay' number (default: 600)
6. included files
As you can see, CTRL-N and CTRL-P can be used to do any 'iskeyword'-
- based expansion (eg dictionary |i_CTRL-X_CTRL-K|, included patterns
- |i_CTRL-X_CTRL-I|, tags |i_CTRL-X_CTRL-]| and normal expansions)
+ based expansion (e.g., dictionary |i_CTRL-X_CTRL-K|, included patterns
+ |i_CTRL-X_CTRL-I|, tags |i_CTRL-X_CTRL-]| and normal expansions).
*'completefunc'* *'cfu'*
'completefunc' 'cfu' string (default: empty)
not after '!' or '?'. Also see 'joinspaces'.
*cpo-J*
J A |sentence| has to be followed by two spaces after
- the '.', '!' or '?'. A <Tab> is not recognized as
+ the '.', '!' or '?'. A <Tab> is not recognized as
white space.
*cpo-k*
k Disable the recognition of raw key codes in
"." is replaced with the path name of the edited file.
- For Unix and Win32, if a directory ends in two path separators, the
swap file name will be built from the complete path to the file
- with all path separators substituted to percent '%' signs. This will
+ with all path separators substituted to percent '%' signs. This will
ensure file name uniqueness in the preserve directory.
- Spaces after the comma are ignored, other spaces are considered part
of the directory name. To have a space at the start of a directory
VMS: "SEARCH/NUMBERS ")
global or local to buffer |global-local|
{not in Vi}
- Program to use for the |:grep| command. This option may contain '%'
+ Program to use for the |:grep| command. This option may contain '%'
and '#' characters, which are expanded like when used in a command-
line. The placeholder "$*" is allowed to specify where the arguments
will be included. Environment variables are expanded |:set_env|. See
i - italic
u - underline
s - strikeout
- cXX - character set XX. valid charsets are: ANSI, ARABIC,
+ cXX - character set XX. Valid charsets are: ANSI, ARABIC,
BALTIC, CHINESEBIG5, DEFAULT, EASTEUROPE, GB2312, GREEK,
HANGEUL, HEBREW, JOHAB, MAC, OEM, RUSSIAN, SHIFTJIS,
SYMBOL, THAI, TURKISH, VIETNAMESE ANSI and BALTIC.
*'guioptions'* *'go'*
'guioptions' 'go' string (default "gmrLtT" (MS-Windows),
- "agimrLtT" (GTK, Motif and Athena)
+ "agimrLtT" (GTK, Motif and Athena))
global
{not in Vi}
{only available when compiled with GUI enabled}
Unix xterm and iris-ansi by default, where 't_IS' is taken from the
builtin termcap).
When Vim was compiled with HAVE_X11 defined, the original icon will be
- restored if possible |X11|. See |X11-icon| for changing the icon on
+ restored if possible |X11|. See |X11-icon| for changing the icon on
X11.
*'iconstring'*
Pattern to be used to find an include command. It is a search
pattern, just like for the "/" command (See |pattern|). The default
value is for C programs. This option is used for the commands "[i",
- "]I", "[d", etc.. The 'isfname' option is used to recognize the file
+ "]I", "[d", etc. The 'isfname' option is used to recognize the file
name that comes after the matched pattern. See |option-backslash|
about including spaces and backslashes.
The characters given by this option are included in identifiers.
Identifiers are used in recognizing environment variables and after a
match of the 'define' option. It is also used for "\i" in a
- |pattern|. See 'isfname' for a description of the format of this
+ |pattern|. See 'isfname' for a description of the format of this
option.
Careful: If you change this option, it might break expanding
environment variables. E.g., when '/' is included and Vim tries to
like in an xterm.
popup Right mouse button pops up a menu. The shifted left
mouse button extends a selection. This works like
- with Microsoft Windows
+ with Microsoft Windows.
popup_setpos Like "popup", but the cursor will be moved to the
position where the mouse was clicked, and thus the
selected operation will act upon the clicked object.
If clicking inside a selection, that selection will
- be acted upon, ie. no cursor move. This implies of
+ be acted upon, i.e. no cursor move. This implies of
course, that right clicking outside a selection will
end Visual mode.
Overview of what button does what for each model:
*'mouseshape'* *'mouses'* *E547*
'mouseshape' 'mouses' string (default "i:beam,r:beam,s:updown,sd:cross,
- m:no,ml:up-arrow,v:rightup-arrow"
+ m:no,ml:up-arrow,v:rightup-arrow")
global
{not in Vi}
{only available when compiled with the |+mouseshape|
If 'rulerformat' is set, it will determine the contents of the ruler.
Each window has its own ruler. If a window has a status line, the
ruler is shown there. Otherwise it is shown in the last line of the
- screen. If the statusline is given by 'statusline' (ie. not empty),
+ screen. If the statusline is given by 'statusline' (i.e. not empty),
this option takes precedence over 'ruler' and 'rulerformat'
If the number of characters displayed is different from the number of
bytes in the text (e.g., for a TAB or a multi-byte character), both
$VIM/vimfiles,
$VIMRUNTIME,
$VIM/vimfiles/after,
- sys$login:vimfiles/after"
+ sys$login:vimfiles/after")
global
{not in Vi}
This is a list of directories which will be searched for runtime
on the command-line, "<" will appear in the left most column.
Ignored in Ex mode.
T truncate other messages in the middle if they are too long to
- fit on the command line. "..." will appear in the middle.
+ fit on the command line. "..." will appear in the middle.
Ignored in Ex mode.
W don't give "written" or "[w]" when writing a file
A don't give the "ATTENTION" message when an existing swap file
global
{not in Vi}
The minimal number of screen columns to keep to the left and to the
- right of the cursor if 'nowrap' is set. Setting this option to a value
+ right of the cursor if 'nowrap' is set. Setting this option to a value
greater than 0 while having |'sidescroll'| also at a non-zero value
makes some context visible in the line you are scrolling in
horizontally (except at the end and beginning of the line). Setting
'laststatus' is 2) is controlling the output of |CTRL-G|.
field meaning ~
- - Left justify the item. The default is right justified
+ - Left justify the item. The default is right justified
when minwid is larger than the length of the item.
- 0 Leading zeroes in numeric items. Overridden by '-'.
+ 0 Leading zeroes in numeric items. Overridden by '-'.
minwid Minimum width of the item, padding as set by '-' & '0'.
Value must be 50 or less.
maxwid Maximum width of the item. Truncation occurs with a '<'
Mnemonic: Offset from start of file (with one added)
{not available when compiled without |+byte_offset| feature}
O N As above, in hexadecimal.
- N N Printer page number. (Only works in the 'printheader' option.)
+ N N Printer page number. (Only works in the 'printheader' option.)
l N Line number.
L N Number of lines in buffer.
c N Column number.
p N Percentage through file in lines as in |CTRL-G|.
P S Percentage through file of displayed window. This is like the
percentage described for 'ruler'. Always 3 in length.
- a S Argument list status as in default title. ({current} of {max})
+ a S Argument list status as in default title. ({current} of {max})
Empty if the argument file count is zero or one.
{ NF Evaluate expression between '{' and '}' and substitute result.
( - Start of item group. Can be used for setting the width and
= - Separation point between left and right aligned items.
No width fields allowed.
* - Set highlight group to User{N}, where {N} is taken from the
- minwid field. eg. %1*. Restore normal highlight with %* or %0*.
+ minwid field, e.g. %1*. Restore normal highlight with %* or %0*.
The difference between User{N} and StatusLine will be applied
to StatusLineNC for the statusline of non-current windows.
The number N must be between 1 and 9. See |hl-User1..9|
with a space it is assumed that it wants to separate itself from
anything but other flags. That is: A leading comma is removed if the
preceding character stems from plaintext. A leading space is removed
- if the preceding character stems from another active flag. This will
+ if the preceding character stems from another active flag. This will
make a nice display when flags are used like in the examples below.
- When all items in a group becomes an empty string (ie. flags that are
+ When all items in a group becomes an empty string (i.e. flags that are
not set) and a minwid is not set for the group, the whole group will
become empty. This will make a group like the following disappear
completely from the statusline when none of the flags are set. >
Beware that an expression is evaluated each and every time the status
line is displayed. The current buffer and current window will be set
temporarily to that of the window (and buffer) whose statusline is
- currently being drawn. The expression will evaluate in this context.
+ currently being drawn. The expression will evaluate in this context.
The variable "actual_curbuf" is set to the 'bufnr()' number of the
real current buffer. The expression is evaluated in the |sandbox|.
also used in all buffer related split commands, for
example ":sbuffer", ":sbnext", or ":sbrewind".
split If included, split the current window before loading
- a buffer. Otherwise: do not split, use current window.
+ a buffer. Otherwise: do not split, use current window.
Supported in |quickfix| commands that display errors.
*'syntax'* *'syn'*
saved. When not included, the value of 'history' is used.
c When included, convert the text in the viminfo file from the
'encoding' used when writing the file to the current
- 'encoding'. See |viminfo-encoding|.
+ 'encoding'. See |viminfo-encoding|.
f Whether file marks need to be stored. If zero, file marks ('0
to '9, 'A to 'Z) are not stored. When not present or when
non-zero, they are all stored. '0 is used for the current
global
{not in Vi}
'wildcharm' works exactly like 'wildchar', except that it is
- recognized when used inside a macro. You can find "spare" command-line
- keys suitable for this option by looking at |ex-edit-index|. Normally
+ recognized when used inside a macro. You can find "spare" command-line
+ keys suitable for this option by looking at |ex-edit-index|. Normally
you'll never actually type 'wildcharm', just use it in mappings that
automatically invoke completion mode, e.g.: >
:set wcm=<C-Z>
Examples: >
:set wildmode=full
-< Complete first full match, next match, etc. (the default) >
+< Complete first full match, next match, etc. (the default) >
:set wildmode=longest,full
< Complete longest common string, then each full match >
:set wildmode=list:full
" Vim filetype plugin file
" Language: C
" Maintainer: Bram Moolenaar <Bram@vim.org>
-" Last Change: 2004 Sep 01
+" Last Change: 2005 Mar 27
" Only do this when not done yet for this buffer
if exists("b:did_ftplugin")
" Don't load another plugin for this buffer
let b:did_ftplugin = 1
+" Using line continuation here.
set cpo-=C
-let b:undo_ftplugin = "setl cin< fo< com<"
- \ . "| if has('vms') | setl isk< | endif"
-
-setlocal cindent
+let b:undo_ftplugin = "setl fo< com< | if has('vms') | setl isk< | endif"
" Set 'formatoptions' to break comment lines but not other lines,
" and insert the comment leader when hitting <CR> or using "o".
command! -nargs=0 NewChangelogEntry call s:new_changelog_entry()
endif
- let b:undo_ftplugin = "setl com< tw< fo< et< ai<"
+ let b:undo_ftplugin = "setl com< tw< fo< et<"
if &textwidth == 0
setlocal textwidth=78
setlocal comments=
setlocal formatoptions+=t
setlocal noexpandtab
- setlocal autoindent
+ " setlocal autoindent now in indent file
let &cpo = cpo_save
else
" Don't load another plugin for this buffer
let b:did_ftplugin = 1
-setlocal cindent
-
" Set 'formatoptions' to break comment lines but not other lines,
" and insert the comment leader when hitting <CR> or using "o".
setlocal fo-=t fo+=croql
if exists("b:did_ftplugin") | finish | endif
let b:did_ftplugin = 1
-setlocal nocindent
-setlocal autoindent
setlocal foldmethod=syntax
set cpo-=C
" Don't load another plugin for this buffer
let b:did_ftplugin = 1
-setl autoindent
setl comments=:;
setl define=^\\s*(def\\k*
setl formatoptions-=t
" e.g. insertion of ;;; and ;; on normal "O" or "o" when staying in comment
setl comments^=:;;;,:;;,sr:#\|,mb:\|,ex:\|#
setl formatoptions+=croql
-" with smartindent # cause left alignment
-setl nosmartindent
-
" Vim filetype plugin file
" Language: RPL/2
" Maintainer: Joël BERTRAND <rpl2@free.fr>
-" Last Change: 2002 Feb 07
+" Last Change: 2005 Mar 28
" Version: 0.1
" Only do this when not done yet for this buffer
" Don't load another plugin for this buffer
let b:did_ftplugin = 1
-setlocal autoindent
-
" Set 'formatoptions' to break comment lines but not other lines,
" and insert the comment leader when hitting <CR> or using "o".
setlocal fo-=t fo+=croql
if exists("b:did_ftplugin") | finish | endif
let b:did_ftplugin = 1
-setlocal nocindent
-setlocal autoindent
setlocal com=sr:'\ -,mb:'\ \ ,el:'\ \ ,:'
" we need this wrapper, as call doesn't allow a count
" Vim support file to switch on loading indent files for file types
"
" Maintainer: Bram Moolenaar <Bram@vim.org>
-" Last Change: 2001 Sep 12
+" Last Change: 2005 Mar 28
if exists("did_indent_on")
finish
let did_indent_on = 1
augroup filetypeindent
- au FileType * if expand("<amatch>") != "" | if exists("b:did_indent") | unlet b:did_indent | endif | runtime! indent/<amatch>.vim | endif
+ au FileType * call s:LoadIndent()
+ func! s:LoadIndent()
+ if exists("b:undo_indent")
+ exe b:undo_indent
+ unlet! b:undo_indent b:did_indent
+ endif
+ if expand("<amatch>") != ""
+ if exists("b:did_indent")
+ unlet b:did_indent
+ endif
+ runtime! indent/<amatch>.vim
+ endif
+ endfunc
augroup END
--- /dev/null
+" Vim indent file
+" Language: BibTeX
+" Maintainer: Dorai Sitaram <ds26@gte.com>
+" URL: http://www.ccs.neu.edu/~dorai/vimplugins/vimplugins.html
+" Last Change: 2005 Mar 28
+
+" Only do this when not done yet for this buffer
+if exists("b:did_indent")
+ finish
+endif
+let b:did_indent = 1
+
+setlocal cindent
+
+let b:undo_indent = "setl cin<"
" Vim indent file
" Language: C
" Maintainer: Bram Moolenaar <Bram@vim.org>
-" Last Change: 2001 Jun 12
+" Last Change: 2005 Mar 27
" Only load this indent file when no other was loaded.
if exists("b:did_indent")
" C indenting is built-in, thus this is very simple
setlocal cindent
+
+let b:undo_indent = "setl cin<"
" C# is like indenting C
setlocal cindent
+
+let b:undo_indent = "setl cin<"
--- /dev/null
+" Vim indent file
+" Language: Lisp
+" Maintainer: noone
+" Last Change: 2005 Mar 28
+
+" Only load this indent file when no other was loaded.
+if exists("b:did_indent")
+ finish
+endif
+let b:did_indent = 1
+
+" Autoindent is the best we can do.
+setlocal ai
+
+let b:undo_indent = "setl ai<"
" Vim indent file
" Language: RPL/2
" Version: 0.2
-" Last Change: 2002 August 16
+" Last Change: 2005 Mar 28
" Maintainer: BERTRAND Joël <rpl2@free.fr>
" Only load this indent file when no other was loaded.
endif
let b:did_indent = 1
+setlocal autoindent
setlocal indentkeys+==~end,=~case,=~if,=~then,=~else,=~do,=~until,=~while,=~repeat,=~select,=~default,=~for,=~start,=~next,=~step,<<>,<>>
" Define the appropriate indent function but only once
finish
endif
+let b:undo_indent = "set ai< indentkeys< indentexpr<"
+
function RplGetIndent(lnum)
let ind = indent(a:lnum)
let prevline=getline(a:lnum)
endif
let b:did_indent = 1
+setlocal autoindent
setlocal indentexpr=VbGetIndent(v:lnum)
setlocal indentkeys&
setlocal indentkeys+==~else,=~elseif,=~end,=~wend,=~case,=~next,=~select,=~loop,<:>
+let b:undo_indent = "set ai< indentexpr< indentkeys<"
+
" Only define the function once.
if exists("*VbGetIndent")
finish
cd $(COMPSOURCE); $(INSTALL_DATA) *.vim README.txt $(DEST_COMP)
cd $(DEST_COMP); chmod $(HELPMOD) *.vim README.txt
-installmacros: $(MACROSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
+installmacros: $(DEST_VIM) $(DEST_RT) $(DEST_MACRO)
$(INSTALL_DATA_R) $(MACROSOURCE)/* $(DEST_MACRO)
chmod $(DIRMOD) `find $(DEST_MACRO) -type d -print`
chmod $(FILEMOD) `find $(DEST_MACRO) -type f -print`
fi
# install the tutor files
-installtutor: $(TUTORSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_TUTOR)
+installtutor: $(DEST_VIM) $(DEST_RT) $(DEST_TUTOR)
$(INSTALL_DATA) vimtutor $(DEST_BIN)/$(VIMNAME)tutor
chmod $(SCRIPTMOD) $(DEST_BIN)/$(VIMNAME)tutor
-$(INSTALL_DATA) $(TUTORSOURCE)/README* $(TUTORSOURCE)/tutor* $(DEST_TUTOR)
chmod $(HELPMOD) $(DEST_TUTOR)/*
# Install the spell files, if they exist.
-installspell: $(SPELLSOURCE) $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
+installspell: $(DEST_VIM) $(DEST_RT) $(DEST_SPELL)
if test -f $(SPELLSOURCE)/en.spl; then \
$(INSTALL_DATA) $(SPELLSOURCE)/*.spl $(DEST_SPELL); \
chmod $(HELPMOD) $(DEST_SPELL)/*.spl; \
* (C) 2000 by Thomas Capricelli <orzel@freehackers.org>
*
* Please visit http://freehackers.org/kvim for other vim- or
- * kde-related coding.
+ * kde-related coding. (URL currently doesn't work...)
*
* $Id$
*
STRCAT(command, pat[i]);
STRCAT(command, "\"");
#else
+ int intick = FALSE;
+
p = command + STRLEN(command);
*p++ = ' ';
for (j = 0; pat[i][j] != NUL; )
- if (vim_strchr((char_u *)" '", pat[i][j]) != NULL)
+ {
+ if (pat[i][j] == '`')
+ {
+ intick = !intick;
+ *p++ = pat[i][j++];
+ }
+ else if (!intick && vim_strchr((char_u *)" '",
+ pat[i][j]) != NULL)
{
*p++ = '"';
while (pat[i][j] != NUL
if ((*p++ = pat[i][j++]) == '\\' && pat[i][j] != NUL)
*p++ = pat[i][j++];
}
+ }
*p = NUL;
#endif
}
*
* +----------------------+
* V |
- * <aa>\+ BRANCH <aa> --> BRANCH --> BACKP BRANCH --> NOTHING --> END
+ * <aa>\+ BRANCH <aa> --> BRANCH --> BACK BRANCH --> NOTHING --> END
* | | ^ ^
* | +-----------+ |
* +--------------------------------------------------+
#define RE_COL 205 /* nr cmp Match column number */
#define RE_VCOL 206 /* nr cmp Match virtual column number */
-#define BACKP 207 /* Like BACK but for \+ */
-
/*
* Magic characters have a special meaning, they don't match literally.
* Magic characters are negative. This separates them from literal characters
* BACK Normal "next" pointers all implicitly point forward; BACK
* exists to make loop structures possible.
*
- * BACKP Like BACK, but used for \+. Doesn't check for an empty match.
- *
* STAR,PLUS '=', and complex '*' and '+', are implemented as circular
* BRANCH structures using BACK. Simple cases (one character
* per match) are implemented with STAR and PLUS for speed
/* Emit x+ as x(&|), where & means "self". */
next = regnode(BRANCH); /* Either */
regtail(ret, next);
- regtail(regnode(BACKP), ret); /* loop back */
+ regtail(regnode(BACK), ret); /* loop back */
regtail(next, regnode(BRANCH)); /* or */
regtail(ret, regnode(NOTHING)); /* null. */
}
scan = temp;
}
- if (OP(scan) == BACK || OP(scan) == BACKP)
+ if (OP(scan) == BACK)
offset = (int)(scan - val);
else
offset = (int)(val - scan);
/*
* Structure used to save the current input state, when it needs to be
* restored after trying a match. Used by reg_save() and reg_restore().
+ * Also stores the length of "backpos".
*/
typedef struct
{
char_u *ptr; /* reginput pointer, for single-line regexp */
lpos_T pos; /* reginput pos, for multi-line regexp */
} rs_u;
+ int rs_len;
} regsave_T;
/* struct to save start/end pointer/position in for \(\) */
char_u *ptr;
lpos_T pos;
} se_u;
+ int se_len;
} save_se_T;
static char_u *reg_getline __ARGS((linenr_T lnum));
static void cleanup_zsubexpr __ARGS((void));
#endif
static void reg_nextline __ARGS((void));
-static void reg_save __ARGS((regsave_T *save));
-static void reg_restore __ARGS((regsave_T *save));
+static void reg_save __ARGS((regsave_T *save, garray_T *gap));
+static void reg_restore __ARGS((regsave_T *save, garray_T *gap));
static int reg_save_equal __ARGS((regsave_T *save));
static void save_se_multi __ARGS((save_se_T *savep, lpos_T *posp));
static void save_se_one __ARGS((save_se_T *savep, char_u **pp));
{
regstate_T rs_state; /* what we are doing, one of RS_ above */
char_u *rs_scan; /* current node in program */
- long rs_startp; /* start position for BACK (offset) */
union
{
save_se_T sesave;
short rs_no; /* submatch nr */
} regitem_T;
-static regitem_T *regstack_push __ARGS((garray_T *regstack, regstate_T state, char_u *scan, long startp));
-static void regstack_pop __ARGS((garray_T *regstack, char_u **scan, long *startp));
+static regitem_T *regstack_push __ARGS((garray_T *regstack, regstate_T state, char_u *scan));
+static void regstack_pop __ARGS((garray_T *regstack, char_u **scan));
/* used for BEHIND and NOBEHIND matching */
typedef struct regbehind_S
{
- regsave_T save_after;
- regsave_T save_behind;
+ regsave_T save_after;
+ regsave_T save_behind;
} regbehind_T;
/* used for STAR, PLUS and BRACE_SIMPLE matching */
long maxval;
} regstar_T;
+/* used to store input position when a BACK was encountered, so that we now if
+ * we made any progress since the last time. */
+typedef struct backpos_S
+{
+ char_u *bp_scan; /* "scan" where BACK was encountered */
+ regsave_T bp_pos; /* last input position */
+} backpos_T;
+
/*
* regmatch - main matching routine
*
char_u *next; /* Next node. */
int op;
int c;
- garray_T regstack;
+ garray_T regstack; /* stack with regitem_T items, sometimes
+ preceded by regstar_T or regbehind_T. */
regitem_T *rp;
int no;
int status; /* one of the RA_ values: */
#define RA_BREAK 3 /* break inner loop */
#define RA_MATCH 4 /* successful match */
#define RA_NOMATCH 5 /* didn't match */
- long startp = 0; /* start position for BACK, offset to
- regstack.ga_data */
-#define STARTP2REGS(startp) (regsave_T *)(((char *)regstack.ga_data) + startp)
-#define REGS2STARTP(p) (long)((char *)p - (char *)regstack.ga_data)
+ garray_T backpos; /* table with backpos_T for BACK */
/* Init the regstack empty. Use an item size of 1 byte, since we push
* different things onto it. Use a large grow size to avoid reallocating
* it too often. */
ga_init2(®stack, 1, 10000);
+ ga_init2(&backpos, sizeof(backpos_T), 10);
+
/*
- * Repeat until the stack is empty.
+ * Repeat until "regstack" is empty.
*/
for (;;)
{
#endif
/*
- * Repeat for items that can be matched sequential, without using the
+ * Repeat for items that can be matched sequentially, without using the
* regstack.
*/
for (;;)
break;
case BACK:
- /* When we run into BACK without matching something non-empty, we
- * fail. */
- if (startp != 0 && reg_save_equal(STARTP2REGS(startp)))
- status = RA_NOMATCH;
- break;
+ {
+ int i;
+ backpos_T *bp;
+
+ /*
+ * When we run into BACK we need to check if we don't keep
+ * looping without matching any input. The second and later
+ * times a BACK is encountered it fails if the input is still
+ * at the same position as the previous time.
+ * The positions are stored in "backpos" and found by the
+ * current value of "scan", the position in the RE program.
+ */
+ bp = (backpos_T *)backpos.ga_data;
+ for (i = 0; i < backpos.ga_len; ++i)
+ if (bp[i].bp_scan == scan)
+ break;
+ if (i == backpos.ga_len)
+ {
+ /* First time at this BACK, make room to store the pos. */
+ if (ga_grow(&backpos, 1) == FAIL)
+ status = RA_FAIL;
+ else
+ {
+ /* get "ga_data" again, it may have changed */
+ bp = (backpos_T *)backpos.ga_data;
+ bp[i].bp_scan = scan;
+ ++backpos.ga_len;
+ }
+ }
+ else if (reg_save_equal(&bp[i].bp_pos))
+ /* Still at same position as last time, fail. */
+ status = RA_NOMATCH;
- case BACKP:
+ if (status != RA_FAIL && status != RA_NOMATCH)
+ reg_save(&bp[i].bp_pos, &backpos);
+ }
break;
case MOPEN + 0: /* Match start: \zs */
{
no = op - MOPEN;
cleanup_subexpr();
- rp = regstack_push(®stack, RS_MOPEN, scan, startp);
+ rp = regstack_push(®stack, RS_MOPEN, scan);
if (rp == NULL)
status = RA_FAIL;
else
case NOPEN: /* \%( */
case NCLOSE: /* \) after \%( */
- if (regstack_push(®stack, RS_NOPEN, scan, startp) == NULL)
+ if (regstack_push(®stack, RS_NOPEN, scan) == NULL)
status = RA_FAIL;
/* We simply continue and handle the result when done. */
break;
{
no = op - ZOPEN;
cleanup_zsubexpr();
- rp = regstack_push(®stack, RS_ZOPEN, scan, startp);
+ rp = regstack_push(®stack, RS_ZOPEN, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
no = op - MCLOSE;
cleanup_subexpr();
- rp = regstack_push(®stack, RS_MCLOSE, scan, startp);
+ rp = regstack_push(®stack, RS_MCLOSE, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
no = op - ZCLOSE;
cleanup_zsubexpr();
- rp = regstack_push(®stack, RS_ZCLOSE, scan, startp);
+ rp = regstack_push(®stack, RS_ZCLOSE, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
if (OP(next) != BRANCH) /* No choice. */
next = OPERAND(scan); /* Avoid recursion. */
- else if (startp != 0 && OP(OPERAND(scan)) == BACKP
- && reg_save_equal(STARTP2REGS(startp)))
- /* \+ with something empty before it */
- status = RA_NOMATCH;
else
{
- rp = regstack_push(®stack, RS_BRANCH, scan, startp);
+ rp = regstack_push(®stack, RS_BRANCH, scan);
if (rp == NULL)
status = RA_FAIL;
else
if (brace_count[no] <= (brace_min[no] <= brace_max[no]
? brace_min[no] : brace_max[no]))
{
- rp = regstack_push(®stack, RS_BRCPLX_MORE, scan, startp);
+ rp = regstack_push(®stack, RS_BRCPLX_MORE, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
rp->rs_no = no;
- reg_save(&rp->rs_un.regsave);
- startp = REGS2STARTP(&rp->rs_un.regsave);
+ reg_save(&rp->rs_un.regsave, &backpos);
next = OPERAND(scan);
/* We continue and handle the result when done. */
}
/* Range is the normal way around, use longest match */
if (brace_count[no] <= brace_max[no])
{
- rp = regstack_push(®stack, RS_BRCPLX_LONG,
- scan, startp);
+ rp = regstack_push(®stack, RS_BRCPLX_LONG, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
rp->rs_no = no;
- reg_save(&rp->rs_un.regsave);
- startp = REGS2STARTP(&rp->rs_un.regsave);
+ reg_save(&rp->rs_un.regsave, &backpos);
next = OPERAND(scan);
/* We continue and handle the result when done. */
}
/* Range is backwards, use shortest match first */
if (brace_count[no] <= brace_min[no])
{
- rp = regstack_push(®stack, RS_BRCPLX_SHORT,
- scan, startp);
+ rp = regstack_push(®stack, RS_BRCPLX_SHORT, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
- reg_save(&rp->rs_un.regsave);
- startp = REGS2STARTP(&rp->rs_un.regsave);
+ reg_save(&rp->rs_un.regsave, &backpos);
/* We continue and handle the result when done. */
}
}
{
regstack.ga_len += sizeof(regstar_T);
rp = regstack_push(®stack, rst.minval <= rst.maxval
- ? RS_STAR_LONG : RS_STAR_SHORT, scan, startp);
+ ? RS_STAR_LONG : RS_STAR_SHORT, scan);
if (rp == NULL)
status = RA_FAIL;
else
case NOMATCH:
case MATCH:
case SUBPAT:
- rp = regstack_push(®stack, RS_NOMATCH, scan, startp);
+ rp = regstack_push(®stack, RS_NOMATCH, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
rp->rs_no = op;
- reg_save(&rp->rs_un.regsave);
+ reg_save(&rp->rs_un.regsave, &backpos);
next = OPERAND(scan);
/* We continue and handle the result when done. */
}
else
{
regstack.ga_len += sizeof(regbehind_T);
- rp = regstack_push(®stack, RS_BEHIND1, scan, startp);
+ rp = regstack_push(®stack, RS_BEHIND1, scan);
if (rp == NULL)
status = RA_FAIL;
else
{
rp->rs_no = op;
- reg_save(&rp->rs_un.regsave);
+ reg_save(&rp->rs_un.regsave, &backpos);
/* First try if what follows matches. If it does then we
* check the behind match by looping. */
}
/*
* If there is something on the regstack execute the code for the state.
- * If the state is popped then loop.
+ * If the state is popped then loop and use the older state.
*/
while (regstack.ga_len > 0 && status != RA_FAIL)
{
{
case RS_NOPEN:
/* Result is passed on as-is, simply pop the state. */
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
break;
case RS_MOPEN:
if (status == RA_NOMATCH)
restore_se(&rp->rs_un.sesave, ®_startpos[rp->rs_no],
®_startp[rp->rs_no]);
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
break;
#ifdef FEAT_SYN_HL
if (status == RA_NOMATCH)
restore_se(&rp->rs_un.sesave, ®_startzpos[rp->rs_no],
®_startzp[rp->rs_no]);
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
break;
#endif
if (status == RA_NOMATCH)
restore_se(&rp->rs_un.sesave, ®_endpos[rp->rs_no],
®_endp[rp->rs_no]);
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
break;
#ifdef FEAT_SYN_HL
if (status == RA_NOMATCH)
restore_se(&rp->rs_un.sesave, ®_endzpos[rp->rs_no],
®_endzp[rp->rs_no]);
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
break;
#endif
case RS_BRANCH:
if (status == RA_MATCH)
/* this branch matched, use it */
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
else
{
if (status != RA_BREAK)
{
/* After a non-matching branch: try next one. */
- reg_restore(&rp->rs_un.regsave);
+ reg_restore(&rp->rs_un.regsave, &backpos);
scan = rp->rs_scan;
}
if (scan == NULL || OP(scan) != BRANCH)
{
/* no more branches, didn't find a match */
status = RA_NOMATCH;
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
}
else
{
/* Prepare to try a branch. */
rp->rs_scan = regnext(scan);
- reg_save(&rp->rs_un.regsave);
- startp = REGS2STARTP(&rp->rs_un.regsave);
+ reg_save(&rp->rs_un.regsave, &backpos);
scan = OPERAND(scan);
}
}
/* Pop the state. Restore pointers when there is no match. */
if (status == RA_NOMATCH)
{
- reg_restore(&rp->rs_un.regsave);
+ reg_restore(&rp->rs_un.regsave, &backpos);
--brace_count[rp->rs_no]; /* decrement match count */
}
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
break;
case RS_BRCPLX_LONG:
if (status == RA_NOMATCH)
{
/* There was no match, but we did find enough matches. */
- reg_restore(&rp->rs_un.regsave);
+ reg_restore(&rp->rs_un.regsave, &backpos);
--brace_count[rp->rs_no];
/* continue with the items after "\{}" */
status = RA_CONT;
}
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
if (status == RA_CONT)
scan = regnext(scan);
break;
/* Pop the state. Restore pointers when there is no match. */
if (status == RA_NOMATCH)
/* There was no match, try to match one more item. */
- reg_restore(&rp->rs_un.regsave);
- regstack_pop(®stack, &scan, &startp);
+ reg_restore(&rp->rs_un.regsave, &backpos);
+ regstack_pop(®stack, &scan);
if (status == RA_NOMATCH)
{
scan = OPERAND(scan);
else
{
status = RA_CONT;
- if (rp->rs_no != SUBPAT)
- reg_restore(&rp->rs_un.regsave); /* zero-width */
+ if (rp->rs_no != SUBPAT) /* zero-width */
+ reg_restore(&rp->rs_un.regsave, &backpos);
}
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
if (status == RA_CONT)
scan = regnext(scan);
break;
case RS_BEHIND1:
if (status == RA_NOMATCH)
{
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
regstack.ga_len -= sizeof(regbehind_T);
}
else
* the current position. */
/* save the position after the found match for next */
- reg_save(&(((regbehind_T *)rp) - 1)->save_after);
+ reg_save(&(((regbehind_T *)rp) - 1)->save_after, &backpos);
/* start looking for a match with operand at the current
* postion. Go back one character until we find the
rp->rs_state = RS_BEHIND2;
- reg_restore(&rp->rs_un.regsave);
+ reg_restore(&rp->rs_un.regsave, &backpos);
scan = OPERAND(rp->rs_scan);
}
break;
/* found a match that ends where "next" started */
behind_pos = (((regbehind_T *)rp) - 1)->save_behind;
if (rp->rs_no == BEHIND)
- reg_restore(&(((regbehind_T *)rp) - 1)->save_after);
+ reg_restore(&(((regbehind_T *)rp) - 1)->save_after,
+ &backpos);
else
/* But we didn't want a match. */
status = RA_NOMATCH;
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
regstack.ga_len -= sizeof(regbehind_T);
}
else
no = FAIL;
else
{
- reg_restore(&rp->rs_un.regsave);
+ reg_restore(&rp->rs_un.regsave, &backpos);
rp->rs_un.regsave.rs_u.pos.col =
(colnr_T)STRLEN(regline);
}
if (no == OK)
{
/* Advanced, prepare for finding match again. */
- reg_restore(&rp->rs_un.regsave);
+ reg_restore(&rp->rs_un.regsave, &backpos);
scan = OPERAND(rp->rs_scan);
}
else
behind_pos = (((regbehind_T *)rp) - 1)->save_behind;
if (rp->rs_no == NOBEHIND)
{
- reg_restore(&(((regbehind_T *)rp) - 1)->save_after);
+ reg_restore(&(((regbehind_T *)rp) - 1)->save_after,
+ &backpos);
status = RA_MATCH;
}
else
status = RA_NOMATCH;
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
regstack.ga_len -= sizeof(regbehind_T);
}
}
if (status == RA_MATCH)
{
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
regstack.ga_len -= sizeof(regstar_T);
break;
}
/* Tried once already, restore input pointers. */
if (status != RA_BREAK)
- reg_restore(&rp->rs_un.regsave);
+ reg_restore(&rp->rs_un.regsave, &backpos);
/* Repeat until we found a position where it could match. */
for (;;)
if (rst->nextb == NUL || *reginput == rst->nextb
|| *reginput == rst->nextb_ic)
{
- reg_save(&rp->rs_un.regsave);
+ reg_save(&rp->rs_un.regsave, &backpos);
scan = regnext(rp->rs_scan);
status = RA_CONT;
break;
if (status != RA_CONT)
{
/* Failed. */
- regstack_pop(®stack, &scan, &startp);
+ regstack_pop(®stack, &scan);
regstack.ga_len -= sizeof(regstar_T);
status = RA_NOMATCH;
}
* Returns pointer to new item. Returns NULL when out of memory.
*/
static regitem_T *
-regstack_push(regstack, state, scan, startp)
+regstack_push(regstack, state, scan)
garray_T *regstack;
regstate_T state;
char_u *scan;
- long startp;
{
regitem_T *rp;
rp = (regitem_T *)((char *)regstack->ga_data + regstack->ga_len);
rp->rs_state = state;
rp->rs_scan = scan;
- rp->rs_startp = startp;
regstack->ga_len += sizeof(regitem_T);
return rp;
* Pop an item from the regstack.
*/
static void
-regstack_pop(regstack, scan, startp)
+regstack_pop(regstack, scan)
garray_T *regstack;
char_u **scan;
- long *startp;
{
regitem_T *rp;
rp = (regitem_T *)((char *)regstack->ga_data + regstack->ga_len) - 1;
*scan = rp->rs_scan;
- *startp = rp->rs_startp;
regstack->ga_len -= sizeof(regitem_T);
}
if (offset == 0)
return NULL;
- if (OP(p) == BACK || OP(p) == BACKP)
+ if (OP(p) == BACK)
return p - offset;
else
return p + offset;
* Save the input line and position in a regsave_T.
*/
static void
-reg_save(save)
+reg_save(save, gap)
regsave_T *save;
+ garray_T *gap;
{
if (REG_MULTI)
{
}
else
save->rs_u.ptr = reginput;
+ save->rs_len = gap->ga_len;
}
/*
* Restore the input line and position from a regsave_T.
*/
static void
-reg_restore(save)
+reg_restore(save, gap)
regsave_T *save;
+ garray_T *gap;
{
if (REG_MULTI)
{
}
else
reginput = save->rs_u.ptr;
+ gap->ga_len = save->rs_len;
}
/*
case BACK:
p = "BACK";
break;
- case BACKP:
- p = "BACKP";
- break;
case END:
p = "END";
break;
int region = REGION_ALL;
int wlen;
winfo_T *wi;
- dword_T *dw, *edw;
+ dword_T *dw, *edw = NULL;
nword_T *nw = NULL;
int flags;
char_u *save_sourcing_name = sourcing_name;
xx Aaa xx
xx foobar xA xx
xx an A xx
+XX 9;
+YY 77;
#define VIM_VERSION_NODOT "vim70aa"
#define VIM_VERSION_SHORT "7.0aa"
#define VIM_VERSION_MEDIUM "7.0aa ALPHA"
-#define VIM_VERSION_LONG "VIM - Vi IMproved 7.0aa ALPHA (2005 Mar 25)"
-#define VIM_VERSION_LONG_DATE "VIM - Vi IMproved 7.0aa ALPHA (2005 Mar 25, compiled "
+#define VIM_VERSION_LONG "VIM - Vi IMproved 7.0aa ALPHA (2005 Mar 28)"
+#define VIM_VERSION_LONG_DATE "VIM - Vi IMproved 7.0aa ALPHA (2005 Mar 28, compiled "
projects / vim / commitdiff