This chapter provides an overview of all available object types which can be
instantiated using the `object` keyword.
-## <a id="objecttype-host"></a> Host
+Additional details on configuration and runtime attributes and their
+description are explained as well.
-A host.
+## <a id="objecttype-apilistener"></a> ApiListener
-Example:
+ApiListener objects are used for distributed monitoring setups
+specifying the certificate files used for ssl authorization.
- object Host "localhost" {
- display_name = "The best host there is"
- address = "127.0.0.1"
- address6 = "::1"
+The `NodeName` constant must be defined in [constants.conf](5-configuring-icinga-2.md#constants-conf).
- groups = [ "all-hosts" ]
+Example:
- check_command = "hostalive"
+ object ApiListener "api" {
+ cert_path = SysconfDir + "/icinga2/pki/" + NodeName + ".crt"
+ key_path = SysconfDir + "/icinga2/pki/" + NodeName + ".key"
+ ca_path = SysconfDir + "/icinga2/pki/ca.crt"
}
-Configuration Attributes:
- Name |Description
- ----------------|----------------
- display_name |**Optional.** A short description of the host.
- address |**Optional.** The host's address. Available as command runtime macro `$address$` if set.
- address6 |**Optional.** The host's address. Available as command runtime macro `$address6$` if set.
- groups |**Optional.** A list of host groups this host belongs to.
- vars |**Optional.** A dictionary containing custom attributes that are specific to this host.
- check\_command |**Required.** The name of the check command.
- max\_check\_attempts|**Optional.** The number of times a host is re-checked before changing into a hard state. Defaults to 3.
- check\_period |**Optional.** The name of a time period which determines when this host should be checked. Not set by default.
- check\_interval |**Optional.** The check interval (in seconds). This interval is used for checks when the host is in a `HARD` state. Defaults to 5 minutes.
- retry\_interval |**Optional.** The retry interval (in seconds). This interval is used for checks when the host is in a `SOFT` state. Defaults to 1 minute.
- enable\_notifications|**Optional.** Whether notifications are enabled. Defaults to true.
- enable\_active\_checks|**Optional.** Whether active checks are enabled. Defaults to true.
- enable\_passive\_checks|**Optional.** Whether passive checks are enabled. Defaults to true.
- enable\_event\_handler|**Optional.** Enables event handlers for this host. Defaults to true.
- enable\_flapping|**Optional.** Whether flap detection is enabled. Defaults to false.
- enable\_perfdata|**Optional.** Whether performance data processing is enabled. Defaults to true.
- event\_command |**Optional.** The name of an event command that should be executed every time the host's state changes or the host is in a `SOFT` state.
- flapping\_threshold|**Optional.** The flapping threshold in percent when a host is considered to be flapping.
- volatile |**Optional.** The volatile setting enables always `HARD` state types if `NOT-OK` state changes occur.
- zone |**Optional.** The zone this object is a member of.
- command\_endpoint|**Optional.** The endpoint where commands are executed on.
- notes |**Optional.** Notes for the host.
- notes\_url |**Optional.** Url for notes for the host (for example, in notification commands).
- action\_url |**Optional.** Url for actions for the host (for example, an external graphing tool).
- icon\_image |**Optional.** Icon image for the host. Used by external interfaces only.
- icon\_image\_alt|**Optional.** Icon image description for the host. Used by external interface only.
+Configuration Attributes:
-> **Best Practice**
->
-> The `address` and `address6` attributes are required for running commands using
-> the `$address$` and `$address6$` runtime macros.
+ Name |Description
+ --------------------------|--------------------------
+ cert\_path |**Required.** Path to the public key.
+ key\_path |**Required.** Path to the private key.
+ ca\_path |**Required.** Path to the CA certificate file.
+ crl\_path |**Optional.** Path to the CRL file.
+ bind\_host |**Optional.** The IP address the api listener should be bound to. Defaults to `0.0.0.0`.
+ bind\_port |**Optional.** The port the api listener should be bound to. Defaults to `5665`.
+ accept\_config |**Optional.** Accept zone configuration. Defaults to `false`.
+ accept\_commands |**Optional.** Accept remote commands. Defaults to `false`.
-Runtime Attributes:
+## <a id="objecttype-checkcommand"></a> CheckCommand
- Name | Type | Description
- --------------------------|---------------|-----------------
- next\_check | Number | When the next check occurs (as a UNIX timestamp).
- check\_attempt | Number | The current check attempt number.
- state\_type | Number | The current state type (0 = SOFT, 1 = HARD).
- last\_state\_type | Number | The previous state type (0 = SOFT, 1 = HARD).
- last\_reachable | Boolean | Whether the host was reachable when the last check occurred.
- last\_check\_result | CheckResult | The current check result.
- last\_state\_change | Number | When the last state change occurred (as a UNIX timestamp).
- last\_hard\_state\_change | Number | When the last hard state change occurred (as a UNIX timestamp).
- last\_in\_downtime | Boolean | Whether the host was in a downtime when the last check occurred.
- acknowledgement | Number | The acknowledgement type (0 = NONE, 1 = NORMAL, 2 = STICKY).
- acknowledgement_expiry | Number | When the acknowledgement expires (as a UNIX timestamp; 0 = no expiry).
- comments | Dictionary | The comments for this host.
- downtimes | Dictionary | The downtimes for this host.
- state | Number | The current state (0 = UP, 1 = DOWN).
- last\_state | Number | The previous state (0 = UP, 1 = DOWN).
- last\_hard\_state | Number | The last hard state (0 = UP, 1 = DOWN).
+A check command definition. Additional default command custom attributes can be
+defined here.
-## <a id="objecttype-hostgroup"></a> HostGroup
+Example:
-A group of hosts.
+ object CheckCommand "check_http" {
+ import "plugin-check-command"
-> **Best Practice**
->
-> Assign host group members using the [group assign](19-language-reference.md#group-assign) rules.
+ command = [ PluginDir + "/check_http" ]
-Example:
+ arguments = {
+ "-H" = "$http_vhost$"
+ "-I" = "$http_address$"
+ "-u" = "$http_uri$"
+ "-p" = "$http_port$"
+ "-S" = {
+ set_if = "$http_ssl$"
+ }
+ "--sni" = {
+ set_if = "$http_sni$"
+ }
+ "-a" = {
+ value = "$http_auth_pair$"
+ description = "Username:password on sites with basic authentication"
+ }
+ "--no-body" = {
+ set_if = "$http_ignore_body$"
+ }
+ "-r" = "$http_expect_body_regex$"
+ "-w" = "$http_warn_time$"
+ "-c" = "$http_critical_time$"
+ "-e" = "$http_expect$"
+ }
- object HostGroup "my-hosts" {
- display_name = "My hosts"
+ vars.http_address = "$address$"
+ vars.http_ssl = false
+ vars.http_sni = false
}
+
Configuration Attributes:
Name |Description
----------------|----------------
- display_name |**Optional.** A short description of the host group.
- groups |**Optional.** An array of nested group names.
-
-## <a id="objecttype-service"></a> Service
-
-Service objects describe network services and how they should be checked
-by Icinga 2.
-
-> **Best Practice**
->
-> Rather than creating a `Service` object for a specific host it is usually easier
-> to just create a `Service` template and use the `apply` keyword to assign the
-> service to a number of hosts.
-> Check the [apply](3-monitoring-basics.md#using-apply) chapter for details.
+ execute |**Required.** The "execute" script method takes care of executing the check. In virtually all cases you should import the "plugin-check-command" template to take care of this setting.
+ command |**Required.** The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command. When using the "arguments" attribute this must be an array.
+ env |**Optional.** A dictionary of macros which should be exported as environment variables prior to executing the command.
+ vars |**Optional.** A dictionary containing custom attributes that are specific to this command.
+ timeout |**Optional.** The command timeout in seconds. Defaults to 60 seconds.
+ zone |**Optional.** The zone this object is a member of.
+ arguments |**Optional.** A dictionary of command arguments.
-Example:
- object Service "uptime" {
- host_name = "localhost"
+### <a id="objecttype-checkcommand-arguments"></a> CheckCommand Arguments
- display_name = "localhost Uptime"
+Command arguments can be defined as key-value-pairs in the `arguments`
+dictionary. If the argument requires additional configuration for example
+a `description` attribute or an optional condition, the value can be defined
+as dictionary specifying additional options.
- check_command = "check_snmp"
+Service:
- vars.community = "public"
- vars.oid = "DISMAN-EVENT-MIB::sysUpTimeInstance"
+ vars.x_val = "My command argument value."
+ vars.have_x = "true"
- check_interval = 60s
- retry_interval = 15s
+CheckCommand:
- groups = [ "all-services", "snmp" ]
+ arguments = {
+ "-X" = {
+ value = "$x_val$"
+ key = "-Xnew" /* optional, set a new key identifier */
+ description = "My plugin requires this argument for doing X."
+ required = false /* optional, no error if not set */
+ skip_key = false /* always use "-X <value>" */
+ set_if = "$have_x$" /* only set if variable defined and resolves to a numeric value. String values are not supported */
+ order = -1 /* first position */
+ repeat_key = true /* if `value` is an array, repeat the key as parameter: ... 'key' 'value[0]' 'key' 'value[1]' 'key' 'value[2]' ... */
+ }
+ "-Y" = {
+ value = "$y_val$"
+ description = "My plugin requires this argument for doing Y."
+ required = false /* optional, no error if not set */
+ skip_key = true /* don't prefix "-Y" only use "<value>" */
+ set_if = "$have_y$" /* only set if variable defined and resolves to a numeric value. String values are not supported */
+ order = 0 /* second position */
+ repeat_key = false /* if `value` is an array, do not repeat the key as parameter: ... 'key' 'value[0]' 'value[1]' 'value[2]' ... */
+ }
}
-Configuration Attributes:
+ Option | Description
+ ------------|--------------
+ value | Optional argument value.
+ key | Optional argument key overriding the key identifier.
+ description | Optional argument description.
+ required | Required argument. Execution error if not set. Defaults to false (optional).
+ skip_key | Use the value as argument and skip the key.
+ set_if | Argument is added if the macro resolves to a defined numeric value. String values are not supported.
+ order | Set if multiple arguments require a defined argument order.
+ repeat_key | If the argument value is an array, repeat the argument key, or not. Defaults to true (repeat).
- Name |Description
- ----------------|----------------
- display_name |**Optional.** A short description of the service.
- host_name |**Required.** The host this service belongs to. There must be a `Host` object with that name.
- name |**Required.** The service name. Must be unique on a per-host basis (Similar to the service_description attribute in Icinga 1.x).
- groups |**Optional.** The service groups this service belongs to.
- vars |**Optional.** A dictionary containing custom attributes that are specific to this service.
- check\_command |**Required.** The name of the check command.
- max\_check\_attempts|**Optional.** The number of times a service is re-checked before changing into a hard state. Defaults to 3.
- check\_period |**Optional.** The name of a time period which determines when this service should be checked. Not set by default.
- check\_interval |**Optional.** The check interval (in seconds). This interval is used for checks when the service is in a `HARD` state. Defaults to 5 minutes.
- retry\_interval |**Optional.** The retry interval (in seconds). This interval is used for checks when the service is in a `SOFT` state. Defaults to 1 minute.
- enable\_notifications|**Optional.** Whether notifications are enabled. Defaults to true.
- enable\_active\_checks|**Optional.** Whether active checks are enabled. Defaults to true.
- enable\_passive\_checks|**Optional.** Whether passive checks are enabled. Defaults to true.
- enable\_event\_handler|**Optional.** Enables event handlers for this host. Defaults to true.
- enable\_flapping|**Optional.** Whether flap detection is enabled. Defaults to false.
- enable\_perfdata|**Optional.** Whether performance data processing is enabled. Defaults to true.
- event\_command |**Optional.** The name of an event command that should be executed every time the service's state changes or the service is in a `SOFT` state.
- flapping\_threshold|**Optional.** The flapping threshold in percent when a service is considered to be flapping.
- volatile |**Optional.** The volatile setting enables always `HARD` state types if `NOT-OK` state changes occur.
- zone |**Optional.** The zone this object is a member of.
- command\_endpoint|**Optional.** The endpoint where commands are executed on.
- notes |**Optional.** Notes for the service.
- notes\_url |**Optional.** Url for notes for the service (for example, in notification commands).
- action_url |**Optional.** Url for actions for the service (for example, an external graphing tool).
- icon\_image |**Optional.** Icon image for the service. Used by external interfaces only.
- icon\_image\_alt|**Optional.** Icon image description for the service. Used by external interface only.
+Argument order:
-Service objects have composite names, i.e. their names are based on the host_name attribute and the name you specified. This means
-you can define more than one object with the same (short) name as long as the `host_name` attribute has a different value.
+ `..., -3, -2, -1, <un-ordered keys>, 1, 2, 3, ...`
-Runtime Attributes:
+Argument array `repeat_key = true`:
- Name | Type | Description
- --------------------------|---------------|-----------------
- next\_check | Number | When the next check occurs (as a UNIX timestamp).
- check\_attempt | Number | The current check attempt number.
- state\_type | Number | The current state type (0 = SOFT, 1 = HARD).
- last\_state\_type | Number | The previous state type (0 = SOFT, 1 = HARD).
- last\_reachable | Boolean | Whether the service was reachable when the last check occurred.
- last\_check\_result | CheckResult | The current check result.
- last\_state\_change | Number | When the last state change occurred (as a UNIX timestamp).
- last\_hard\_state\_change | Number | When the last hard state change occurred (as a UNIX timestamp).
- last\_in\_downtime | Boolean | Whether the service was in a downtime when the last check occurred.
- acknowledgement | Number | The acknowledgement type (0 = NONE, 1 = NORMAL, 2 = STICKY).
- acknowledgement_expiry | Number | When the acknowledgement expires (as a UNIX timestamp; 0 = no expiry).
- comments | Dictionary | The comments for this service.
- downtimes | Dictionary | The downtimes for this service.
- state | Number | The current state (0 = OK, 1 = WARNING, 2 = CRITICAL, 3 = UNKNOWN).
- last\_state | Number | The previous state (0 = OK, 1 = WARNING, 2 = CRITICAL, 3 = UNKNOWN).
- last\_hard\_state | Number | The last hard state (0 = OK, 1 = WARNING, 2 = CRITICAL, 3 = UNKNOWN).
+ `'key' 'value[0]' 'key' 'value[1]' 'key' 'value[2]'`
+Argument array `repeat_key = false`:
-## <a id="objecttype-servicegroup"></a> ServiceGroup
+ `'key' 'value[0]' 'value[1]' 'value[2]'`
-A group of services.
+## <a id="objecttype-checkcomponent"></a> CheckerComponent
-> **Best Practice**
->
-> Assign service group members using the [group assign](19-language-reference.md#group-assign) rules.
+The checker component is responsible for scheduling active checks. There are no configurable options.
Example:
- object ServiceGroup "snmp" {
- display_name = "SNMP services"
- }
+ library "checker"
-Configuration Attributes:
+ object CheckerComponent "checker" { }
+
+## <a id="objecttype-checkresultreader"></a> CheckResultReader
+
+Reads Icinga 1.x check results from a directory. This functionality is provided
+to help existing Icinga 1.x users and might be useful for certain cluster
+scenarios.
+
+Example:
+
+ library "compat"
+
+ object CheckResultReader "reader" {
+ spool_dir = "/data/check-results"
+ }
+
+Configuration Attributes:
Name |Description
----------------|----------------
- display_name |**Optional.** A short description of the service group.
- groups |**Optional.** An array of nested group names.
+ spool\_dir |**Optional.** The directory which contains the check result files. Defaults to LocalStateDir + "/lib/icinga2/spool/checkresults/".
-## <a id="objecttype-user"></a> User
+## <a id="objecttype-compatlogger"></a> CompatLogger
-A user.
+Writes log files in a format that's compatible with Icinga 1.x.
Example:
- object User "icingaadmin" {
- display_name = "Icinga 2 Admin"
- groups = [ "icingaadmins" ]
- email = "icinga@localhost"
- pager = "icingaadmin@localhost.localdomain"
+ library "compat"
- period = "24x7"
+ object CompatLogger "my-log" {
+ log_dir = "/var/log/icinga2/compat"
+ rotation_method = "HOURLY"
+ }
- states = [ OK, Warning, Critical, Unknown ]
- types = [ Problem, Recovery ]
+Configuration Attributes:
- vars.additional_notes = "This is the Icinga 2 Admin account."
+ Name |Description
+ ----------------|----------------
+ log\_dir |**Optional.** Path to the compat log directory. Defaults to LocalStateDir + "/log/icinga2/compat".
+ rotation\_method|**Optional.** Specifies when to rotate log files. Can be one of "HOURLY", "DAILY", "WEEKLY" or "MONTHLY". Defaults to "HOURLY".
+
+
+
+## <a id="objecttype-dependency"></a> Dependency
+
+Dependency objects are used to specify dependencies between hosts and services. Dependencies
+can be defined as Host-to-Host, Service-to-Service, Service-to-Host, or Host-to-Service
+relations.
+
+> **Best Practice**
+>
+> Rather than creating a `Dependency` object for a specific host or service it is usually easier
+> to just create a `Dependency` template and use the `apply` keyword to assign the
+> dependency to a number of hosts or services. Use the `to` keyword to set the specific target
+> type for `Host` or `Service`.
+> Check the [dependencies](3-monitoring-basics.md#dependencies) chapter for detailed examples.
+
+Service-to-Service Example:
+
+ object Dependency "webserver-internet" {
+ parent_host_name = "internet"
+ parent_service_name = "ping4"
+
+ child_host_name = "webserver"
+ child_service_name = "ping4"
+
+ states = [ OK, Warning ]
+
+ disable_checks = true
}
-Available notification state filters:
+Host-to-Host Example:
+
+ object Dependency "webserver-internet" {
+ parent_host_name = "internet"
+
+ child_host_name = "webserver"
+
+ states = [ Up ]
+
+ disable_checks = true
+ }
+
+Configuration Attributes:
+
+ Name |Description
+ ----------------------|----------------
+ parent_host_name |**Required.** The parent host.
+ parent_service_name |**Optional.** The parent service. If omitted this dependency object is treated as host dependency.
+ child_host_name |**Required.** The child host.
+ child_service_name |**Optional.** The child service. If omitted this dependency object is treated as host dependency.
+ disable_checks |**Optional.** Whether to disable checks when this dependency fails. Defaults to false.
+ disable_notifications |**Optional.** Whether to disable notifications when this dependency fails. Defaults to true.
+ ignore_soft_states |**Optional.** Whether to ignore soft states for the reachability calculation. Defaults to true.
+ period |**Optional.** Time period during which this dependency is enabled.
+ zone |**Optional.** The zone this object is a member of.
+ states |**Optional.** A list of state filters when this dependency should be OK. Defaults to [ OK, Warning ] for services and [ Up ] for hosts.
+
+Available state filters:
OK
Warning
Up
Down
-Available notification type filters:
+When using [apply rules](3-monitoring-basics.md#using-apply) for dependencies, you can leave out certain attributes which will be
+automatically determined by Icinga 2.
- DowntimeStart
- DowntimeEnd
- DowntimeRemoved
- Custom
- Acknowledgement
- Problem
- Recovery
- FlappingStart
- FlappingEnd
+Service-to-Host Dependency Example:
-Configuration Attributes:
+ apply Dependency "internet" to Service {
+ parent_host_name = "dsl-router"
+ disable_checks = true
- Name |Description
- ----------------|----------------
- display_name |**Optional.** A short description of the user.
- email |**Optional.** An email string for this user. Useful for notification commands.
- pager |**Optional.** A pager string for this user. Useful for notification commands.
- vars |**Optional.** A dictionary containing custom attributes that are specific to this user.
- groups |**Optional.** An array of group names.
- enable_notifications|**Optional.** Whether notifications are enabled for this user.
- period |**Optional.** The name of a time period which determines when a notification for this user should be triggered. Not set by default.
- types |**Optional.** A set of type filters when this notification should be triggered. By default everything is matched.
- states |**Optional.** A set of state filters when this notification should be triggered. By default everything is matched.
- zone |**Optional.** The zone this object is a member of.
+ assign where host.name != "dsl-router"
+ }
-Runtime Attributes:
+This example sets all service objects matching the assign condition into a dependency relation to
+the parent host object `dsl-router` as implicit child services.
- Name | Type | Description
- --------------------------|---------------|-----------------
- last\_notification | Number | When the last notification was sent for this user (as a UNIX timestamp).
+Service-to-Service-on-the-same-Host Dependency Example:
-## <a id="objecttype-usergroup"></a> UserGroup
+ apply Dependency "disable-nrpe-checks" to Service {
+ parent_service_name = "nrpe-health"
-A user group.
+ assign where service.check_command == "nrpe"
+ ignore where service.name == "nrpe-health"
+ }
-> **Best Practice**
->
-> Assign user group members using the [group assign](19-language-reference.md#group-assign) rules.
+This example omits the `parent_host_name` attribute and Icinga 2 automatically sets its value to the name of the
+host object matched by the apply rule condition. All services where apply matches are made implicit child services
+in this dependency relation.
+
+
+Dependency objects have composite names, i.e. their names are based on the `child_host_name` and `child_service_name` attributes and the
+name you specified. This means you can define more than one object with the same (short) name as long as one of the `child_host_name` and
+`child_service_name` attributes has a different value.
+
+
+## <a id="objecttype-endpoint"></a> Endpoint
+
+Endpoint objects are used to specify connection information for remote
+Icinga 2 instances.
Example:
- object UserGroup "icingaadmins" {
- display_name = "Icinga 2 Admin Group"
+ object Endpoint "icinga2b" {
+ host = "192.168.5.46"
+ port = 5665
}
Configuration Attributes:
Name |Description
----------------|----------------
- display_name |**Optional.** A short description of the user group.
- groups |**Optional.** An array of nested group names.
- zone |**Optional.** The zone this object is a member of.
-
+ host |**Optional.** The hostname/IP address of the remote Icinga 2 instance.
+ port |**Optional.** The service name/port of the remote Icinga 2 instance. Defaults to `5665`.
+ log_duration |**Optional.** Duration for keeping replay logs on connection loss. Defaults to `1d`.
-## <a id="objecttype-checkcommand"></a> CheckCommand
+## <a id="objecttype-zone"></a> Zone
-A check command definition. Additional default command custom attributes can be
-defined here.
+Zone objects are used to specify which Icinga 2 instances are located in a zone.
Example:
- object CheckCommand "check_http" {
- import "plugin-check-command"
+ object Zone "config-ha-master" {
+ endpoints = [ "icinga2a", "icinga2b" ]
- command = [ PluginDir + "/check_http" ]
+ }
- arguments = {
- "-H" = "$http_vhost$"
- "-I" = "$http_address$"
- "-u" = "$http_uri$"
- "-p" = "$http_port$"
- "-S" = {
- set_if = "$http_ssl$"
- }
- "--sni" = {
- set_if = "$http_sni$"
- }
- "-a" = {
- value = "$http_auth_pair$"
- description = "Username:password on sites with basic authentication"
- }
- "--no-body" = {
- set_if = "$http_ignore_body$"
- }
- "-r" = "$http_expect_body_regex$"
- "-w" = "$http_warn_time$"
- "-c" = "$http_critical_time$"
- "-e" = "$http_expect$"
- }
+ object Zone "check-satellite" {
+ endpoints = [ "icinga2c" ]
+ parent = "config-ha-master"
+ }
- vars.http_address = "$address$"
- vars.http_ssl = false
- vars.http_sni = false
+Configuration Attributes:
+
+ Name |Description
+ ----------------|----------------
+ endpoints |**Optional.** Dictionary with endpoints located in this zone.
+ parent |**Optional.** The name of the parent zone.
+ global |**Optional.** Whether configuration files for this zone should be synced to all endpoints. Defaults to false.
+
+
+## <a id="objecttype-eventcommand"></a> EventCommand
+
+An event command definition.
+
+Example:
+
+ object EventCommand "restart-httpd-event" {
+ import "plugin-event-command"
+
+ command = "/opt/bin/restart-httpd.sh"
}
Name |Description
----------------|----------------
- execute |**Required.** The "execute" script method takes care of executing the check. In virtually all cases you should import the "plugin-check-command" template to take care of this setting.
- command |**Required.** The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command. When using the "arguments" attribute this must be an array.
+ execute |**Required.** The "execute" script method takes care of executing the event handler. In virtually all cases you should import the "plugin-event-command" template to take care of this setting.
+ command |**Required.** The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command.
env |**Optional.** A dictionary of macros which should be exported as environment variables prior to executing the command.
vars |**Optional.** A dictionary containing custom attributes that are specific to this command.
timeout |**Optional.** The command timeout in seconds. Defaults to 60 seconds.
- zone |**Optional.** The zone this object is a member of.
arguments |**Optional.** A dictionary of command arguments.
+Command arguments can be used the same way as for [CheckCommand objects](6-object-types.md#objecttype-checkcommand-arguments).
-### <a id="objecttype-checkcommand-arguments"></a> CheckCommand Arguments
-Command arguments can be defined as key-value-pairs in the `arguments`
-dictionary. If the argument requires additional configuration for example
-a `description` attribute or an optional condition, the value can be defined
-as dictionary specifying additional options.
+## <a id="objecttype-externalcommandlistener"></a> ExternalCommandListener
-Service:
+Implements the Icinga 1.x command pipe which can be used to send commands to Icinga.
- vars.x_val = "My command argument value."
- vars.have_x = "true"
+Example:
-CheckCommand:
+ library "compat"
- arguments = {
- "-X" = {
- value = "$x_val$"
- key = "-Xnew" /* optional, set a new key identifier */
- description = "My plugin requires this argument for doing X."
- required = false /* optional, no error if not set */
- skip_key = false /* always use "-X <value>" */
- set_if = "$have_x$" /* only set if variable defined and resolves to a numeric value. String values are not supported */
- order = -1 /* first position */
- repeat_key = true /* if `value` is an array, repeat the key as parameter: ... 'key' 'value[0]' 'key' 'value[1]' 'key' 'value[2]' ... */
- }
- "-Y" = {
- value = "$y_val$"
- description = "My plugin requires this argument for doing Y."
- required = false /* optional, no error if not set */
- skip_key = true /* don't prefix "-Y" only use "<value>" */
- set_if = "$have_y$" /* only set if variable defined and resolves to a numeric value. String values are not supported */
- order = 0 /* second position */
- repeat_key = false /* if `value` is an array, do not repeat the key as parameter: ... 'key' 'value[0]' 'value[1]' 'value[2]' ... */
- }
+ object ExternalCommandListener "external" {
+ command_path = "/var/run/icinga2/cmd/icinga2.cmd"
}
- Option | Description
- ------------|--------------
- value | Optional argument value.
- key | Optional argument key overriding the key identifier.
- description | Optional argument description.
- required | Required argument. Execution error if not set. Defaults to false (optional).
- skip_key | Use the value as argument and skip the key.
- set_if | Argument is added if the macro resolves to a defined numeric value. String values are not supported.
- order | Set if multiple arguments require a defined argument order.
- repeat_key | If the argument value is an array, repeat the argument key, or not. Defaults to true (repeat).
-
-Argument order:
-
- `..., -3, -2, -1, <un-ordered keys>, 1, 2, 3, ...`
-
-Argument array `repeat_key = true`:
-
- `'key' 'value[0]' 'key' 'value[1]' 'key' 'value[2]'`
+Configuration Attributes:
-Argument array `repeat_key = false`:
+ Name |Description
+ ----------------|----------------
+ command\_path |**Optional.** Path to the command pipe. Defaults to RunDir + "/icinga2/cmd/icinga2.cmd".
- `'key' 'value[0]' 'value[1]' 'value[2]'`
-## <a id="objecttype-notificationcommand"></a> NotificationCommand
+## <a id="objecttype-filelogger"></a> FileLogger
-A notification command definition.
+Specifies Icinga 2 logging to a file.
Example:
- object NotificationCommand "mail-service-notification" {
- import "plugin-notification-command"
-
- command = [
- SysconfDir + "/icinga2/scripts/mail-notification.sh"
- ]
-
- env = {
- NOTIFICATIONTYPE = "$notification.type$"
- SERVICEDESC = "$service.name$"
- HOSTALIAS = "$host.display_name$"
- HOSTADDRESS = "$address$"
- SERVICESTATE = "$service.state$"
- LONGDATETIME = "$icinga.long_date_time$"
- SERVICEOUTPUT = "$service.output$"
- NOTIFICATIONAUTHORNAME = "$notification.author$"
- NOTIFICATIONCOMMENT = "$notification.comment$"
- HOSTDISPLAYNAME = "$host.display_name$"
- SERVICEDISPLAYNAME = "$service.display_name$"
- USEREMAIL = "$user.email$"
- }
+ object FileLogger "debug-file" {
+ severity = "debug"
+ path = "/var/log/icinga2/debug.log"
}
Configuration Attributes:
Name |Description
----------------|----------------
- execute |**Required.** The "execute" script method takes care of executing the notification. In virtually all cases you should import the "plugin-notification-command" template to take care of this setting.
- command |**Required.** The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command.
- env |**Optional.** A dictionary of macros which should be exported as environment variables prior to executing the command.
- vars |**Optional.** A dictionary containing custom attributes that are specific to this command.
- timeout |**Optional.** The command timeout in seconds. Defaults to 60 seconds.
- zone |**Optional.** The zone this object is a member of.
- arguments |**Optional.** A dictionary of command arguments.
-
-Command arguments can be used the same way as for [CheckCommand objects](6-object-types.md#objecttype-checkcommand-arguments).
+ path |**Required.** The log path.
+ severity |**Optional.** The minimum severity for this log. Can be "debug", "notice", "information", "warning" or "critical". Defaults to "information".
-## <a id="objecttype-eventcommand"></a> EventCommand
+## <a id="objecttype-gelfwriter"></a> GelfWriter
-An event command definition.
+Writes event log entries to a defined GELF receiver host (Graylog2, Logstash).
Example:
- object EventCommand "restart-httpd-event" {
- import "plugin-event-command"
+ library "perfdata"
- command = "/opt/bin/restart-httpd.sh"
+ object GelfWriter "gelf" {
+ host = "127.0.0.1"
+ port = 12201
}
-
Configuration Attributes:
- Name |Description
- ----------------|----------------
- execute |**Required.** The "execute" script method takes care of executing the event handler. In virtually all cases you should import the "plugin-event-command" template to take care of this setting.
- command |**Required.** The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command.
- env |**Optional.** A dictionary of macros which should be exported as environment variables prior to executing the command.
- vars |**Optional.** A dictionary containing custom attributes that are specific to this command.
- timeout |**Optional.** The command timeout in seconds. Defaults to 60 seconds.
- arguments |**Optional.** A dictionary of command arguments.
-
-Command arguments can be used the same way as for [CheckCommand objects](6-object-types.md#objecttype-checkcommand-arguments).
-
+ Name |Description
+ ----------------------|----------------------
+ host |**Optional.** GELF receiver host address. Defaults to '127.0.0.1'.
+ port |**Optional.** GELF receiver port. Defaults to `12201`.
+ source |**Optional.** Source name for this instance. Defaults to `icinga2`.
-## <a id="objecttype-notification"></a> Notification
-Notification objects are used to specify how users should be notified in case
-of host and service state changes and other events.
+## <a id="objecttype-graphitewriter"></a> GraphiteWriter
-> **Best Practice**
->
-> Rather than creating a `Notification` object for a specific host or service it is
-> usually easier to just create a `Notification` template and use the `apply` keyword
-> to assign the notification to a number of hosts or services. Use the `to` keyword
-> to set the specific target type for `Host` or `Service`.
-> Check the [notifications](3-monitoring-basics.md#notifications) chapter for detailed examples.
+Writes check result metrics and performance data to a defined
+Graphite Carbon host.
Example:
- object Notification "localhost-ping-notification" {
- host_name = "localhost"
- service_name = "ping4"
-
- command = "mail-notification"
-
- users = [ "user1", "user2" ]
+ library "perfdata"
- types = [ Problem, Recovery ]
+ object GraphiteWriter "graphite" {
+ host = "127.0.0.1"
+ port = 2003
}
Configuration Attributes:
- Name | Description
- --------------------------|----------------
- host_name | **Required.** The name of the host this notification belongs to.
- service_name | **Optional.** The short name of the service this notification belongs to. If omitted this notification object is treated as host notification.
- vars | **Optional.** A dictionary containing custom attributes that are specific to this notification object.
- users | **Optional.** A list of user names who should be notified.
- user_groups | **Optional.** A list of user group names who should be notified.
- times | **Optional.** A dictionary containing `begin` and `end` attributes for the notification.
- command | **Required.** The name of the notification command which should be executed when the notification is triggered.
- interval | **Optional.** The notification interval (in seconds). This interval is used for active notifications. Defaults to 30 minutes. If set to 0, [re-notifications](3-monitoring-basics.md#disable-renotification) are disabled.
- period | **Optional.** The name of a time period which determines when this notification should be triggered. Not set by default.
- zone |**Optional.** The zone this object is a member of.
- types | **Optional.** A list of type filters when this notification should be triggered. By default everything is matched.
- states | **Optional.** A list of state filters when this notification should be triggered. By default everything is matched.
-
-Available notification state filters:
+ Name |Description
+ ----------------------|----------------------
+ host |**Optional.** Graphite Carbon host address. Defaults to '127.0.0.1'.
+ port |**Optional.** Graphite Carbon port. Defaults to 2003.
+ host_name_template |**Optional.** Metric prefix for host name. Defaults to "icinga.$host.name$".
+ service_name_template |**Optional.** Metric prefix for service name. Defaults to "icinga.$host.name$.$service.name$".
- OK
- Warning
- Critical
- Unknown
- Up
- Down
+Metric prefix names can be modified using [runtime macros](3-monitoring-basics.md#runtime-macros).
-Available notification type filters:
+Example with your custom [global constant](19-language-reference.md#constants) `GraphiteEnv`:
- DowntimeStart
- DowntimeEnd
- DowntimeRemoved
- Custom
- Acknowledgement
- Problem
- Recovery
- FlappingStart
- FlappingEnd
+ const GraphiteEnv = "icinga.env1"
-Runtime Attributes:
+ host_name_template = GraphiteEnv + ".$host.name$"
+ service_name_template = GraphiteEnv + ".$host.name$.$service.name$"
- Name | Type | Description
- --------------------------|---------------|-----------------
- last\_notification | Number | When the last notification was sent for this Notification object (as a UNIX timestamp).
- next\_notifcation | Number | When the next notification is going to be sent for this assuming the associated host/service is still in a non-OK state (as a UNIX timestamp).
- notification\_number | Number | The notification number
- last\_problem\_notification | Number | When the last notification was sent for a problem (as a UNIX timestamp).
-## <a id="objecttype-timeperiod"></a> TimePeriod
+## <a id="objecttype-host"></a> Host
-Time periods can be used to specify when hosts/services should be checked or to limit
-when notifications should be sent out.
+A host.
Example:
- object TimePeriod "24x7" {
- import "legacy-timeperiod"
+ object Host NodeName {
+ display_name = "Local host on this node"
+ address = "127.0.0.1"
+ address6 = "::1"
- display_name = "Icinga 2 24x7 TimePeriod"
+ groups = [ "all-hosts" ]
- ranges = {
- monday = "00:00-24:00"
- tuesday = "00:00-24:00"
- wednesday = "00:00-24:00"
- thursday = "00:00-24:00"
- friday = "00:00-24:00"
- saturday = "00:00-24:00"
- sunday = "00:00-24:00"
- }
+ check_command = "hostalive"
}
Configuration Attributes:
Name |Description
----------------|----------------
- display_name |**Optional.** A short description of the time period.
- update |**Required.** The "update" script method takes care of updating the internal representation of the time period. In virtually all cases you should import the "legacy-timeperiod" template to take care of this setting.
+ display_name |**Optional.** A short description of the host (e.g. displayed by external interfaces instead of the name if set).
+ address |**Optional.** The host's address. Available as command runtime macro `$address$` if set.
+ address6 |**Optional.** The host's address. Available as command runtime macro `$address6$` if set.
+ groups |**Optional.** A list of host groups this host belongs to.
+ vars |**Optional.** A dictionary containing custom attributes that are specific to this host.
+ check\_command |**Required.** The name of the check command.
+ max\_check\_attempts|**Optional.** The number of times a host is re-checked before changing into a hard state. Defaults to 3.
+ check\_period |**Optional.** The name of a time period which determines when this host should be checked. Not set by default.
+ check\_interval |**Optional.** The check interval (in seconds). This interval is used for checks when the host is in a `HARD` state. Defaults to 5 minutes.
+ retry\_interval |**Optional.** The retry interval (in seconds). This interval is used for checks when the host is in a `SOFT` state. Defaults to 1 minute.
+ enable\_notifications|**Optional.** Whether notifications are enabled. Defaults to true.
+ enable\_active\_checks|**Optional.** Whether active checks are enabled. Defaults to true.
+ enable\_passive\_checks|**Optional.** Whether passive checks are enabled. Defaults to true.
+ enable\_event\_handler|**Optional.** Enables event handlers for this host. Defaults to true.
+ enable\_flapping|**Optional.** Whether flap detection is enabled. Defaults to false.
+ enable\_perfdata|**Optional.** Whether performance data processing is enabled. Defaults to true.
+ event\_command |**Optional.** The name of an event command that should be executed every time the host's state changes or the host is in a `SOFT` state.
+ flapping\_threshold|**Optional.** The flapping threshold in percent when a host is considered to be flapping.
+ volatile |**Optional.** The volatile setting enables always `HARD` state types if `NOT-OK` state changes occur.
zone |**Optional.** The zone this object is a member of.
- ranges |**Required.** A dictionary containing information which days and durations apply to this timeperiod.
+ command\_endpoint|**Optional.** The endpoint where commands are executed on.
+ notes |**Optional.** Notes for the host.
+ notes\_url |**Optional.** Url for notes for the host (for example, in notification commands).
+ action\_url |**Optional.** Url for actions for the host (for example, an external graphing tool).
+ icon\_image |**Optional.** Icon image for the host. Used by external interfaces only.
+ icon\_image\_alt|**Optional.** Icon image description for the host. Used by external interface only.
-The `/etc/icinga2/conf.d/timeperiods.conf` file is usually used to define
-timeperiods including this one.
+> **Best Practice**
+>
+> The `address` and `address6` attributes are required for running commands using
+> the `$address$` and `$address6$` runtime macros.
Runtime Attributes:
Name | Type | Description
--------------------------|---------------|-----------------
- is\_inside | Boolean | Whether we're currently inside this timeperiod.
+ next\_check | Number | When the next check occurs (as a UNIX timestamp).
+ check\_attempt | Number | The current check attempt number.
+ state\_type | Number | The current state type (0 = SOFT, 1 = HARD).
+ last\_state\_type | Number | The previous state type (0 = SOFT, 1 = HARD).
+ last\_reachable | Boolean | Whether the host was reachable when the last check occurred.
+ last\_check\_result | CheckResult | The current check result.
+ last\_state\_change | Number | When the last state change occurred (as a UNIX timestamp).
+ last\_hard\_state\_change | Number | When the last hard state change occurred (as a UNIX timestamp).
+ last\_in\_downtime | Boolean | Whether the host was in a downtime when the last check occurred.
+ acknowledgement | Number | The acknowledgement type (0 = NONE, 1 = NORMAL, 2 = STICKY).
+ acknowledgement_expiry | Number | When the acknowledgement expires (as a UNIX timestamp; 0 = no expiry).
+ comments | Dictionary | The comments for this host.
+ downtimes | Dictionary | The downtimes for this host.
+ state | Number | The current state (0 = UP, 1 = DOWN).
+ last\_state | Number | The previous state (0 = UP, 1 = DOWN).
+ last\_hard\_state | Number | The last hard state (0 = UP, 1 = DOWN).
-## <a id="objecttype-scheduleddowntime"></a> ScheduledDowntime
-ScheduledDowntime objects can be used to set up recurring downtimes for hosts/services.
-> **Best Practice**
->
-> Rather than creating a `ScheduledDowntime` object for a specific host or service it is usually easier
-> to just create a `ScheduledDowntime` template and use the `apply` keyword to assign the
-> scheduled downtime to a number of hosts or services. Use the `to` keyword to set the specific target
-> type for `Host` or `Service`.
-> Check the [recurring downtimes](4-advanced-topics.md#recurring-downtimes) example for details.
-
-Example:
-
- object ScheduledDowntime "some-downtime" {
- host_name = "localhost"
- service_name = "ping4"
-
- author = "icingaadmin"
- comment = "Some comment"
-
- fixed = false
- duration = 30m
-
- ranges = {
- "sunday" = "02:00-03:00"
- }
- }
-
-Configuration Attributes:
-
- Name |Description
- ----------------|----------------
- host_name |**Required.** The name of the host this scheduled downtime belongs to.
- service_name |**Optional.** The short name of the service this scheduled downtime belongs to. If omitted this downtime object is treated as host downtime.
- author |**Required.** The author of the downtime.
- comment |**Required.** A comment for the downtime.
- fixed |**Optional.** Whether this is a fixed downtime. Defaults to true.
- duration |**Optional.** How long the downtime lasts. Only has an effect for flexible (non-fixed) downtimes.
- zone |**Optional.** The zone this object is a member of.
- ranges |**Required.** A dictionary containing information which days and durations apply to this timeperiod.
-
-ScheduledDowntime objects have composite names, i.e. their names are based
-on the `host_name` and `service_name` attributes and the
-name you specified. This means you can define more than one object
-with the same (short) name as long as one of the `host_name` and
-`service_name` attributes has a different value.
-
-
-## <a id="objecttype-dependency"></a> Dependency
+## <a id="objecttype-hostgroup"></a> HostGroup
-Dependency objects are used to specify dependencies between hosts and services. Dependencies
-can be defined as Host-to-Host, Service-to-Service, Service-to-Host, or Host-to-Service
-relations.
+A group of hosts.
> **Best Practice**
>
-> Rather than creating a `Dependency` object for a specific host or service it is usually easier
-> to just create a `Dependency` template and use the `apply` keyword to assign the
-> dependency to a number of hosts or services. Use the `to` keyword to set the specific target
-> type for `Host` or `Service`.
-> Check the [dependencies](3-monitoring-basics.md#dependencies) chapter for detailed examples.
-
-Service-to-Service Example:
-
- object Dependency "webserver-internet" {
- parent_host_name = "internet"
- parent_service_name = "ping4"
-
- child_host_name = "webserver"
- child_service_name = "ping4"
-
- states = [ OK, Warning ]
-
- disable_checks = true
- }
-
-Host-to-Host Example:
-
- object Dependency "webserver-internet" {
- parent_host_name = "internet"
-
- child_host_name = "webserver"
-
- states = [ Up ]
-
- disable_checks = true
- }
-
-Configuration Attributes:
-
- Name |Description
- ----------------------|----------------
- parent_host_name |**Required.** The parent host.
- parent_service_name |**Optional.** The parent service. If omitted this dependency object is treated as host dependency.
- child_host_name |**Required.** The child host.
- child_service_name |**Optional.** The child service. If omitted this dependency object is treated as host dependency.
- disable_checks |**Optional.** Whether to disable checks when this dependency fails. Defaults to false.
- disable_notifications |**Optional.** Whether to disable notifications when this dependency fails. Defaults to true.
- ignore_soft_states |**Optional.** Whether to ignore soft states for the reachability calculation. Defaults to true.
- period |**Optional.** Time period during which this dependency is enabled.
- zone |**Optional.** The zone this object is a member of.
- states |**Optional.** A list of state filters when this dependency should be OK. Defaults to [ OK, Warning ] for services and [ Up ] for hosts.
-
-Available state filters:
-
- OK
- Warning
- Critical
- Unknown
- Up
- Down
-
-When using [apply rules](3-monitoring-basics.md#using-apply) for dependencies, you can leave out certain attributes which will be
-automatically determined by Icinga 2.
-
-Service-to-Host Dependency Example:
-
- apply Dependency "internet" to Service {
- parent_host_name = "dsl-router"
- disable_checks = true
-
- assign where host.name != "dsl-router"
- }
-
-This example sets all service objects matching the assign condition into a dependency relation to
-the parent host object `dsl-router` as implicit child services.
-
-Service-to-Service-on-the-same-Host Dependency Example:
-
- apply Dependency "disable-nrpe-checks" to Service {
- parent_service_name = "nrpe-health"
-
- assign where service.check_command == "nrpe"
- ignore where service.name == "nrpe-health"
- }
-
-This example omits the `parent_host_name` attribute and Icinga 2 automatically sets its value to the name of the
-host object matched by the apply rule condition. All services where apply matches are made implicit child services
-in this dependency relation.
-
-
-Dependency objects have composite names, i.e. their names are based on the `child_host_name` and `child_service_name` attributes and the
-name you specified. This means you can define more than one object with the same (short) name as long as one of the `child_host_name` and
-`child_service_name` attributes has a different value.
-
-
-## <a id="objecttype-perfdatawriter"></a> PerfdataWriter
-
-Writes check result performance data to a defined path using macro
-pattern consisting of custom attributes and runtime macros.
-
-Example:
-
- library "perfdata"
-
- object PerfdataWriter "pnp" {
- host_perfdata_path = "/var/spool/icinga2/perfdata/host-perfdata"
-
- service_perfdata_path = "/var/spool/icinga2/perfdata/service-perfdata"
-
- host_format_template = "DATATYPE::HOSTPERFDATA\tTIMET::$icinga.timet$\tHOSTNAME::$host.name$\tHOSTPERFDATA::$host.perfdata$\tHOSTCHECKCOMMAND::$host.check_command$\tHOSTSTATE::$host.state$\tHOSTSTATETYPE::$host.state_type$"
- service_format_template = "DATATYPE::SERVICEPERFDATA\tTIMET::$icinga.timet$\tHOSTNAME::$host.name$\tSERVICEDESC::$service.name$\tSERVICEPERFDATA::$service.perfdata$\tSERVICECHECKCOMMAND::$service.check_command$\tHOSTSTATE::$host.state$\tHOSTSTATETYPE::$host.state_type$\tSERVICESTATE::$service.state$\tSERVICESTATETYPE::$service.state_type$"
-
- rotation_interval = 15s
- }
-
-Configuration Attributes:
-
- Name |Description
- ------------------------|----------------
- host_perfdata\_path |**Optional.** Path to the host performance data file. Defaults to LocalStateDir + "/spool/icinga2/perfdata/host-perfdata".
- service_perfdata\_path |**Optional.** Path to the service performance data file. Defaults to LocalStateDir + "/spool/icinga2/perfdata/service-perfdata".
- host_temp\_path |**Optional.** Path to the temporary host file. Defaults to LocalStateDir + "/spool/icinga2/tmp/host-perfdata".
- service_temp\_path |**Optional.** Path to the temporary service file. Defaults to LocalStateDir + "/spool/icinga2/tmp/service-perfdata".
- host_format\_template |**Optional.** Host Format template for the performance data file. Defaults to a template that's suitable for use with PNP4Nagios.
- service_format\_template|**Optional.** Service Format template for the performance data file. Defaults to a template that's suitable for use with PNP4Nagios.
- rotation\_interval |**Optional.** Rotation interval for the files specified in `{host,service}_perfdata_path`. Defaults to 30 seconds.
-
-When rotating the performance data file the current UNIX timestamp is appended to the path specified
-in `host_perfdata_path` and `service_perfdata_path` to generate a unique filename.
-
-
-## <a id="objecttype-graphitewriter"></a> GraphiteWriter
-
-Writes check result metrics and performance data to a defined
-Graphite Carbon host.
-
-Example:
-
- library "perfdata"
-
- object GraphiteWriter "graphite" {
- host = "127.0.0.1"
- port = 2003
- }
-
-Configuration Attributes:
-
- Name |Description
- ----------------------|----------------------
- host |**Optional.** Graphite Carbon host address. Defaults to '127.0.0.1'.
- port |**Optional.** Graphite Carbon port. Defaults to 2003.
- host_name_template |**Optional.** Metric prefix for host name. Defaults to "icinga.$host.name$".
- service_name_template |**Optional.** Metric prefix for service name. Defaults to "icinga.$host.name$.$service.name$".
-
-Metric prefix names can be modified using [runtime macros](3-monitoring-basics.md#runtime-macros).
-
-Example with your custom [global constant](19-language-reference.md#constants) `GraphiteEnv`:
-
- const GraphiteEnv = "icinga.env1"
-
- host_name_template = GraphiteEnv + ".$host.name$"
- service_name_template = GraphiteEnv + ".$host.name$.$service.name$"
-
-## <a id="objecttype-opentsdbwriter"></a> OpenTsdbWriter
-
-Writes check result metrics and performance data to OpenTSDB.
+> Assign host group members using the [group assign](19-language-reference.md#group-assign) rules.
Example:
- library "perfdata"
-
- object OpenTsdbWriter "opentsdb" {
- host = "127.0.0.1"
- port = 4242
+ object HostGroup "my-hosts" {
+ display_name = "My hosts"
}
Configuration Attributes:
- Name |Description
- ----------------------|----------------------
- host |**Optional.** OpenTSDB host address. Defaults to '127.0.0.1'.
- port |**Optional.** OpenTSDB port. Defaults to 4242.
+ Name |Description
+ ----------------|----------------
+ display_name |**Optional.** A short description of the host group.
+ groups |**Optional.** An array of nested group names.
-## <a id="objecttype-gelfwriter"></a> GelfWriter
+## <a id="objecttype-icingastatuswriter"></a> IcingaStatusWriter
-Writes event log entries to a defined GELF receiver host (Graylog2, Logstash).
+The IcingaStatusWriter feature periodically dumps the current status
+and performance data from Icinga 2 and all registered features into
+a defined JSON file.
Example:
- library "perfdata"
-
- object GelfWriter "gelf" {
- host = "127.0.0.1"
- port = 12201
+ object IcingaStatusWriter "status" {
+ status_path = LocalStateDir + "/cache/icinga2/status.json"
+ update_interval = 15s
}
Configuration Attributes:
- Name |Description
- ----------------------|----------------------
- host |**Optional.** GELF receiver host address. Defaults to '127.0.0.1'.
- port |**Optional.** GELF receiver port. Defaults to `12201`.
- source |**Optional.** Source name for this instance. Defaults to `icinga2`.
+ Name |Description
+ --------------------------|--------------------------
+ status\_path |**Optional.** Path to cluster status file. Defaults to LocalStateDir + "/cache/icinga2/status.json"
+ update\_interval |**Optional.** The interval in which the status files are updated. Defaults to 15 seconds.
## <a id="objecttype-idomysqlconnection"></a> IdoMySqlConnection
DbCatRetention | Retention data | Icinga Web/Reporting
DbCatStateHistory | Historical state data | Icinga Web/Reporting
-Multiple categories can be combined using the `|` operator. In addition to
-the category flags listed above the `DbCatEverything` flag may be used as
-a shortcut for listing all flags.
+Multiple categories can be combined using the `|` operator. In addition to
+the category flags listed above the `DbCatEverything` flag may be used as
+a shortcut for listing all flags.
+
+External interfaces like Icinga Web require everything except `DbCatCheck`
+which is the default value if `categories` is not set.
+
+## <a id="objecttype-livestatuslistener"></a> LiveStatusListener
+
+Livestatus API interface available as TCP or UNIX socket. Historical table queries
+require the [CompatLogger](6-object-types.md#objecttype-compatlogger) feature enabled
+pointing to the log files using the `compat_log_path` configuration attribute.
+
+Example:
+
+ library "livestatus"
+
+ object LivestatusListener "livestatus-tcp" {
+ socket_type = "tcp"
+ bind_host = "127.0.0.1"
+ bind_port = "6558"
+ }
+
+ object LivestatusListener "livestatus-unix" {
+ socket_type = "unix"
+ socket_path = "/var/run/icinga2/cmd/livestatus"
+ }
+
+Configuration Attributes:
+
+ Name |Description
+ ----------------|----------------
+ socket\_type |**Optional.** Specifies the socket type. Can be either "tcp" or "unix". Defaults to "unix".
+ bind\_host |**Optional.** Only valid when socket\_type is "tcp". Host address to listen on for connections. Defaults to "127.0.0.1".
+ bind\_port |**Optional.** Only valid when `socket_type` is "tcp". Port to listen on for connections. Defaults to 6558.
+ socket\_path |**Optional.** Only valid when `socket_type` is "unix". Specifies the path to the UNIX socket file. Defaults to RunDir + "/icinga2/cmd/livestatus".
+ compat\_log\_path |**Optional.** Required for historical table queries. Requires `CompatLogger` feature enabled. Defaults to LocalStateDir + "/log/icinga2/compat"
+
+> **Note**
+>
+> UNIX sockets are not supported on Windows.
+
+
+## <a id="objecttype-notification"></a> Notification
+
+Notification objects are used to specify how users should be notified in case
+of host and service state changes and other events.
+
+> **Best Practice**
+>
+> Rather than creating a `Notification` object for a specific host or service it is
+> usually easier to just create a `Notification` template and use the `apply` keyword
+> to assign the notification to a number of hosts or services. Use the `to` keyword
+> to set the specific target type for `Host` or `Service`.
+> Check the [notifications](3-monitoring-basics.md#notifications) chapter for detailed examples.
+
+Example:
+
+ object Notification "localhost-ping-notification" {
+ host_name = "localhost"
+ service_name = "ping4"
+
+ command = "mail-notification"
+
+ users = [ "user1", "user2" ]
+
+ types = [ Problem, Recovery ]
+ }
+
+Configuration Attributes:
+
+ Name | Description
+ --------------------------|----------------
+ host_name | **Required.** The name of the host this notification belongs to.
+ service_name | **Optional.** The short name of the service this notification belongs to. If omitted this notification object is treated as host notification.
+ vars | **Optional.** A dictionary containing custom attributes that are specific to this notification object.
+ users | **Optional.** A list of user names who should be notified.
+ user_groups | **Optional.** A list of user group names who should be notified.
+ times | **Optional.** A dictionary containing `begin` and `end` attributes for the notification.
+ command | **Required.** The name of the notification command which should be executed when the notification is triggered.
+ interval | **Optional.** The notification interval (in seconds). This interval is used for active notifications. Defaults to 30 minutes. If set to 0, [re-notifications](3-monitoring-basics.md#disable-renotification) are disabled.
+ period | **Optional.** The name of a time period which determines when this notification should be triggered. Not set by default.
+ zone |**Optional.** The zone this object is a member of.
+ types | **Optional.** A list of type filters when this notification should be triggered. By default everything is matched.
+ states | **Optional.** A list of state filters when this notification should be triggered. By default everything is matched.
+
+Available notification state filters:
+
+ OK
+ Warning
+ Critical
+ Unknown
+ Up
+ Down
+
+Available notification type filters:
+
+ DowntimeStart
+ DowntimeEnd
+ DowntimeRemoved
+ Custom
+ Acknowledgement
+ Problem
+ Recovery
+ FlappingStart
+ FlappingEnd
+
+Runtime Attributes:
+
+ Name | Type | Description
+ --------------------------|---------------|-----------------
+ last\_notification | Number | When the last notification was sent for this Notification object (as a UNIX timestamp).
+ next\_notifcation | Number | When the next notification is going to be sent for this assuming the associated host/service is still in a non-OK state (as a UNIX timestamp).
+ notification\_number | Number | The notification number
+ last\_problem\_notification | Number | When the last notification was sent for a problem (as a UNIX timestamp).
+
+
+## <a id="objecttype-notificationcommand"></a> NotificationCommand
+
+A notification command definition.
+
+Example:
+
+ object NotificationCommand "mail-service-notification" {
+ import "plugin-notification-command"
+
+ command = [
+ SysconfDir + "/icinga2/scripts/mail-notification.sh"
+ ]
+
+ env = {
+ NOTIFICATIONTYPE = "$notification.type$"
+ SERVICEDESC = "$service.name$"
+ HOSTALIAS = "$host.display_name$"
+ HOSTADDRESS = "$address$"
+ SERVICESTATE = "$service.state$"
+ LONGDATETIME = "$icinga.long_date_time$"
+ SERVICEOUTPUT = "$service.output$"
+ NOTIFICATIONAUTHORNAME = "$notification.author$"
+ NOTIFICATIONCOMMENT = "$notification.comment$"
+ HOSTDISPLAYNAME = "$host.display_name$"
+ SERVICEDISPLAYNAME = "$service.display_name$"
+ USEREMAIL = "$user.email$"
+ }
+ }
+
+Configuration Attributes:
+
+ Name |Description
+ ----------------|----------------
+ execute |**Required.** The "execute" script method takes care of executing the notification. In virtually all cases you should import the "plugin-notification-command" template to take care of this setting.
+ command |**Required.** The command. This can either be an array of individual command arguments. Alternatively a string can be specified in which case the shell interpreter (usually /bin/sh) takes care of parsing the command.
+ env |**Optional.** A dictionary of macros which should be exported as environment variables prior to executing the command.
+ vars |**Optional.** A dictionary containing custom attributes that are specific to this command.
+ timeout |**Optional.** The command timeout in seconds. Defaults to 60 seconds.
+ zone |**Optional.** The zone this object is a member of.
+ arguments |**Optional.** A dictionary of command arguments.
+
+Command arguments can be used the same way as for [CheckCommand objects](6-object-types.md#objecttype-checkcommand-arguments).
+
+
+## <a id="objecttype-notificationcomponent"></a> NotificationComponent
+
+The notification component is responsible for sending notifications. There are no configurable options.
+
+Example:
+
+ library "notification"
+
+ object NotificationComponent "notification" { }
+
+Configuration Attributes:
+
+ Name |Description
+ ----------------|----------------
+ enable\_ha |**Optional.** Enable the high availability functionality. Only valid in a [cluster setup](12-distributed-monitoring-ha.md#high-availability-notifications). Defaults to "true".
+
+## <a id="objecttype-opentsdbwriter"></a> OpenTsdbWriter
+
+Writes check result metrics and performance data to [OpenTSDB](http://opentsdb.net).
+
+Example:
+
+ library "perfdata"
+
+ object OpenTsdbWriter "opentsdb" {
+ host = "127.0.0.1"
+ port = 4242
+ }
+
+Configuration Attributes:
+
+ Name |Description
+ ----------------------|----------------------
+ host |**Optional.** OpenTSDB host address. Defaults to '127.0.0.1'.
+ port |**Optional.** OpenTSDB port. Defaults to 4242.
+
+
+## <a id="objecttype-perfdatawriter"></a> PerfdataWriter
+
+Writes check result performance data to a defined path using macro
+pattern consisting of custom attributes and runtime macros.
+
+Example:
+
+ library "perfdata"
+
+ object PerfdataWriter "pnp" {
+ host_perfdata_path = "/var/spool/icinga2/perfdata/host-perfdata"
+
+ service_perfdata_path = "/var/spool/icinga2/perfdata/service-perfdata"
+
+ host_format_template = "DATATYPE::HOSTPERFDATA\tTIMET::$icinga.timet$\tHOSTNAME::$host.name$\tHOSTPERFDATA::$host.perfdata$\tHOSTCHECKCOMMAND::$host.check_command$\tHOSTSTATE::$host.state$\tHOSTSTATETYPE::$host.state_type$"
+ service_format_template = "DATATYPE::SERVICEPERFDATA\tTIMET::$icinga.timet$\tHOSTNAME::$host.name$\tSERVICEDESC::$service.name$\tSERVICEPERFDATA::$service.perfdata$\tSERVICECHECKCOMMAND::$service.check_command$\tHOSTSTATE::$host.state$\tHOSTSTATETYPE::$host.state_type$\tSERVICESTATE::$service.state$\tSERVICESTATETYPE::$service.state_type$"
+
+ rotation_interval = 15s
+ }
+
+Configuration Attributes:
+
+ Name |Description
+ ------------------------|----------------
+ host_perfdata\_path |**Optional.** Path to the host performance data file. Defaults to LocalStateDir + "/spool/icinga2/perfdata/host-perfdata".
+ service_perfdata\_path |**Optional.** Path to the service performance data file. Defaults to LocalStateDir + "/spool/icinga2/perfdata/service-perfdata".
+ host_temp\_path |**Optional.** Path to the temporary host file. Defaults to LocalStateDir + "/spool/icinga2/tmp/host-perfdata".
+ service_temp\_path |**Optional.** Path to the temporary service file. Defaults to LocalStateDir + "/spool/icinga2/tmp/service-perfdata".
+ host_format\_template |**Optional.** Host Format template for the performance data file. Defaults to a template that's suitable for use with PNP4Nagios.
+ service_format\_template|**Optional.** Service Format template for the performance data file. Defaults to a template that's suitable for use with PNP4Nagios.
+ rotation\_interval |**Optional.** Rotation interval for the files specified in `{host,service}_perfdata_path`. Defaults to 30 seconds.
+
+When rotating the performance data file the current UNIX timestamp is appended to the path specified
+in `host_perfdata_path` and `service_perfdata_path` to generate a unique filename.
+
+
+## <a id="objecttype-scheduleddowntime"></a> ScheduledDowntime
+
+ScheduledDowntime objects can be used to set up recurring downtimes for hosts/services.
+
+> **Best Practice**
+>
+> Rather than creating a `ScheduledDowntime` object for a specific host or service it is usually easier
+> to just create a `ScheduledDowntime` template and use the `apply` keyword to assign the
+> scheduled downtime to a number of hosts or services. Use the `to` keyword to set the specific target
+> type for `Host` or `Service`.
+> Check the [recurring downtimes](4-advanced-topics.md#recurring-downtimes) example for details.
+
+Example:
+
+ object ScheduledDowntime "some-downtime" {
+ host_name = "localhost"
+ service_name = "ping4"
+
+ author = "icingaadmin"
+ comment = "Some comment"
+
+ fixed = false
+ duration = 30m
+
+ ranges = {
+ "sunday" = "02:00-03:00"
+ }
+ }
+
+Configuration Attributes:
+
+ Name |Description
+ ----------------|----------------
+ host_name |**Required.** The name of the host this scheduled downtime belongs to.
+ service_name |**Optional.** The short name of the service this scheduled downtime belongs to. If omitted this downtime object is treated as host downtime.
+ author |**Required.** The author of the downtime.
+ comment |**Required.** A comment for the downtime.
+ fixed |**Optional.** Whether this is a fixed downtime. Defaults to true.
+ duration |**Optional.** How long the downtime lasts. Only has an effect for flexible (non-fixed) downtimes.
+ zone |**Optional.** The zone this object is a member of.
+ ranges |**Required.** A dictionary containing information which days and durations apply to this timeperiod.
+
+ScheduledDowntime objects have composite names, i.e. their names are based
+on the `host_name` and `service_name` attributes and the
+name you specified. This means you can define more than one object
+with the same (short) name as long as one of the `host_name` and
+`service_name` attributes has a different value.
+
+
+## <a id="objecttype-service"></a> Service
+
+Service objects describe network services and how they should be checked
+by Icinga 2.
+
+> **Best Practice**
+>
+> Rather than creating a `Service` object for a specific host it is usually easier
+> to just create a `Service` template and use the `apply` keyword to assign the
+> service to a number of hosts.
+> Check the [apply](3-monitoring-basics.md#using-apply) chapter for details.
+
+Example:
+
+ object Service "uptime" {
+ host_name = "localhost"
+
+ display_name = "localhost Uptime"
+
+ check_command = "check_snmp"
+
+ vars.community = "public"
+ vars.oid = "DISMAN-EVENT-MIB::sysUpTimeInstance"
+
+ check_interval = 60s
+ retry_interval = 15s
+
+ groups = [ "all-services", "snmp" ]
+ }
+
+Configuration Attributes:
+
+ Name |Description
+ ----------------|----------------
+ display_name |**Optional.** A short description of the service.
+ host_name |**Required.** The host this service belongs to. There must be a `Host` object with that name.
+ name |**Required.** The service name. Must be unique on a per-host basis (Similar to the service_description attribute in Icinga 1.x).
+ groups |**Optional.** The service groups this service belongs to.
+ vars |**Optional.** A dictionary containing custom attributes that are specific to this service.
+ check\_command |**Required.** The name of the check command.
+ max\_check\_attempts|**Optional.** The number of times a service is re-checked before changing into a hard state. Defaults to 3.
+ check\_period |**Optional.** The name of a time period which determines when this service should be checked. Not set by default.
+ check\_interval |**Optional.** The check interval (in seconds). This interval is used for checks when the service is in a `HARD` state. Defaults to 5 minutes.
+ retry\_interval |**Optional.** The retry interval (in seconds). This interval is used for checks when the service is in a `SOFT` state. Defaults to 1 minute.
+ enable\_notifications|**Optional.** Whether notifications are enabled. Defaults to true.
+ enable\_active\_checks|**Optional.** Whether active checks are enabled. Defaults to true.
+ enable\_passive\_checks|**Optional.** Whether passive checks are enabled. Defaults to true.
+ enable\_event\_handler|**Optional.** Enables event handlers for this host. Defaults to true.
+ enable\_flapping|**Optional.** Whether flap detection is enabled. Defaults to false.
+ enable\_perfdata|**Optional.** Whether performance data processing is enabled. Defaults to true.
+ event\_command |**Optional.** The name of an event command that should be executed every time the service's state changes or the service is in a `SOFT` state.
+ flapping\_threshold|**Optional.** The flapping threshold in percent when a service is considered to be flapping.
+ volatile |**Optional.** The volatile setting enables always `HARD` state types if `NOT-OK` state changes occur.
+ zone |**Optional.** The zone this object is a member of.
+ command\_endpoint|**Optional.** The endpoint where commands are executed on.
+ notes |**Optional.** Notes for the service.
+ notes\_url |**Optional.** Url for notes for the service (for example, in notification commands).
+ action_url |**Optional.** Url for actions for the service (for example, an external graphing tool).
+ icon\_image |**Optional.** Icon image for the service. Used by external interfaces only.
+ icon\_image\_alt|**Optional.** Icon image description for the service. Used by external interface only.
+
+Service objects have composite names, i.e. their names are based on the host_name attribute and the name you specified. This means
+you can define more than one object with the same (short) name as long as the `host_name` attribute has a different value.
+
+Runtime Attributes:
+
+ Name | Type | Description
+ --------------------------|---------------|-----------------
+ next\_check | Number | When the next check occurs (as a UNIX timestamp).
+ check\_attempt | Number | The current check attempt number.
+ state\_type | Number | The current state type (0 = SOFT, 1 = HARD).
+ last\_state\_type | Number | The previous state type (0 = SOFT, 1 = HARD).
+ last\_reachable | Boolean | Whether the service was reachable when the last check occurred.
+ last\_check\_result | CheckResult | The current check result.
+ last\_state\_change | Number | When the last state change occurred (as a UNIX timestamp).
+ last\_hard\_state\_change | Number | When the last hard state change occurred (as a UNIX timestamp).
+ last\_in\_downtime | Boolean | Whether the service was in a downtime when the last check occurred.
+ acknowledgement | Number | The acknowledgement type (0 = NONE, 1 = NORMAL, 2 = STICKY).
+ acknowledgement_expiry | Number | When the acknowledgement expires (as a UNIX timestamp; 0 = no expiry).
+ comments | Dictionary | The comments for this service.
+ downtimes | Dictionary | The downtimes for this service.
+ state | Number | The current state (0 = OK, 1 = WARNING, 2 = CRITICAL, 3 = UNKNOWN).
+ last\_state | Number | The previous state (0 = OK, 1 = WARNING, 2 = CRITICAL, 3 = UNKNOWN).
+ last\_hard\_state | Number | The last hard state (0 = OK, 1 = WARNING, 2 = CRITICAL, 3 = UNKNOWN).
+
-External interfaces like Icinga Web require everything except `DbCatCheck`
-which is the default value if `categories` is not set.
+## <a id="objecttype-servicegroup"></a> ServiceGroup
-## <a id="objecttype-livestatuslistener"></a> LiveStatusListener
+A group of services.
-Livestatus API interface available as TCP or UNIX socket. Historical table queries
-require the `CompatLogger` feature enabled pointing to the log files using the
-`compat_log_path` configuration attribute.
+> **Best Practice**
+>
+> Assign service group members using the [group assign](19-language-reference.md#group-assign) rules.
Example:
- library "livestatus"
-
- object LivestatusListener "livestatus-tcp" {
- socket_type = "tcp"
- bind_host = "127.0.0.1"
- bind_port = "6558"
- }
-
- object LivestatusListener "livestatus-unix" {
- socket_type = "unix"
- socket_path = "/var/run/icinga2/cmd/livestatus"
+ object ServiceGroup "snmp" {
+ display_name = "SNMP services"
}
Configuration Attributes:
Name |Description
----------------|----------------
- socket\_type |**Optional.** Specifies the socket type. Can be either "tcp" or "unix". Defaults to "unix".
- bind\_host |**Optional.** Only valid when socket\_type is "tcp". Host address to listen on for connections. Defaults to "127.0.0.1".
- bind\_port |**Optional.** Only valid when `socket_type` is "tcp". Port to listen on for connections. Defaults to 6558.
- socket\_path |**Optional.** Only valid when `socket_type` is "unix". Specifies the path to the UNIX socket file. Defaults to RunDir + "/icinga2/cmd/livestatus".
- compat\_log\_path |**Optional.** Required for historical table queries. Requires `CompatLogger` feature enabled. Defaults to LocalStateDir + "/log/icinga2/compat"
+ display_name |**Optional.** A short description of the service group.
+ groups |**Optional.** An array of nested group names.
-> **Note**
->
-> UNIX sockets are not supported on Windows.
## <a id="objecttype-statusdatawriter"></a> StatusDataWriter
update\_interval|**Optional.** The interval in which the status files are updated. Defaults to 15 seconds.
-## <a id="objecttype-externalcommandlistener"></a> ExternalCommandListener
-
-Implements the Icinga 1.x command pipe which can be used to send commands to Icinga.
-
-Example:
-
- library "compat"
-
- object ExternalCommandListener "external" {
- command_path = "/var/run/icinga2/cmd/icinga2.cmd"
- }
-
-Configuration Attributes:
-
- Name |Description
- ----------------|----------------
- command\_path |**Optional.** Path to the command pipe. Defaults to RunDir + "/icinga2/cmd/icinga2.cmd".
-
-## <a id="objecttype-compatlogger"></a> CompatLogger
+## <a id="objecttype-sysloglogger"></a> SyslogLogger
-Writes log files in a format that's compatible with Icinga 1.x.
+Specifies Icinga 2 logging to syslog.
Example:
- library "compat"
-
- object CompatLogger "my-log" {
- log_dir = "/var/log/icinga2/compat"
- rotation_method = "HOURLY"
+ object SyslogLogger "crit-syslog" {
+ severity = "critical"
}
Configuration Attributes:
Name |Description
----------------|----------------
- log\_dir |**Optional.** Path to the compat log directory. Defaults to LocalStateDir + "/log/icinga2/compat".
- rotation\_method|**Optional.** Specifies when to rotate log files. Can be one of "HOURLY", "DAILY", "WEEKLY" or "MONTHLY". Defaults to "HOURLY".
+ severity |**Optional.** The minimum severity for this log. Can be "debug", "notice", "information", "notice", "warning" or "critical". Defaults to "warning".
-## <a id="objecttype-checkresultreader"></a> CheckResultReader
+## <a id="objecttype-timeperiod"></a> TimePeriod
-Reads Icinga 1.x check results from a directory. This functionality is provided
-to help existing Icinga 1.x users and might be useful for certain cluster
-scenarios.
+Time periods can be used to specify when hosts/services should be checked or to limit
+when notifications should be sent out.
Example:
- library "compat"
+ object TimePeriod "24x7" {
+ import "legacy-timeperiod"
- object CheckResultReader "reader" {
- spool_dir = "/data/check-results"
+ display_name = "Icinga 2 24x7 TimePeriod"
+
+ ranges = {
+ monday = "00:00-24:00"
+ tuesday = "00:00-24:00"
+ wednesday = "00:00-24:00"
+ thursday = "00:00-24:00"
+ friday = "00:00-24:00"
+ saturday = "00:00-24:00"
+ sunday = "00:00-24:00"
+ }
}
Configuration Attributes:
Name |Description
----------------|----------------
- spool\_dir |**Optional.** The directory which contains the check result files. Defaults to LocalStateDir + "/lib/icinga2/spool/checkresults/".
-
-
-## <a id="objecttype-checkcomponent"></a> CheckerComponent
-
-The checker component is responsible for scheduling active checks. There are no configurable options.
+ display_name |**Optional.** A short description of the time period.
+ update |**Required.** The "update" script method takes care of updating the internal representation of the time period. In virtually all cases you should import the "legacy-timeperiod" template to take care of this setting.
+ zone |**Optional.** The zone this object is a member of.
+ ranges |**Required.** A dictionary containing information which days and durations apply to this timeperiod.
-Example:
+The `/etc/icinga2/conf.d/timeperiods.conf` file is usually used to define
+timeperiods including this one.
- library "checker"
+Runtime Attributes:
- object CheckerComponent "checker" { }
+ Name | Type | Description
+ --------------------------|---------------|-----------------
+ is\_inside | Boolean | Whether we're currently inside this timeperiod.
-## <a id="objecttype-notificationcomponent"></a> NotificationComponent
+## <a id="objecttype-user"></a> User
-The notification component is responsible for sending notifications. There are no configurable options.
+A user.
Example:
- library "notification"
-
- object NotificationComponent "notification" { }
-
-Configuration Attributes:
-
- Name |Description
- ----------------|----------------
- enable\_ha |**Optional.** Enable the high availability functionality. Only valid in a [cluster setup](#high-availability). Defaults to "true".
-
-
-## <a id="objecttype-filelogger"></a> FileLogger
+ object User "icingaadmin" {
+ display_name = "Icinga 2 Admin"
+ groups = [ "icingaadmins" ]
+ email = "icinga@localhost"
+ pager = "icingaadmin@localhost.localdomain"
-Specifies Icinga 2 logging to a file.
+ period = "24x7"
-Example:
+ states = [ OK, Warning, Critical, Unknown ]
+ types = [ Problem, Recovery ]
- object FileLogger "debug-file" {
- severity = "debug"
- path = "/var/log/icinga2/debug.log"
+ vars.additional_notes = "This is the Icinga 2 Admin account."
}
-Configuration Attributes:
-
- Name |Description
- ----------------|----------------
- path |**Required.** The log path.
- severity |**Optional.** The minimum severity for this log. Can be "debug", "notice", "information", "warning" or "critical". Defaults to "information".
-
-
-## <a id="objecttype-sysloglogger"></a> SyslogLogger
+Available notification state filters:
-Specifies Icinga 2 logging to syslog.
+ OK
+ Warning
+ Critical
+ Unknown
+ Up
+ Down
-Example:
+Available notification type filters:
- object SyslogLogger "crit-syslog" {
- severity = "critical"
- }
+ DowntimeStart
+ DowntimeEnd
+ DowntimeRemoved
+ Custom
+ Acknowledgement
+ Problem
+ Recovery
+ FlappingStart
+ FlappingEnd
Configuration Attributes:
Name |Description
----------------|----------------
- severity |**Optional.** The minimum severity for this log. Can be "debug", "notice", "information", "notice", "warning" or "critical". Defaults to "warning".
-
-
-
-## <a id="objecttype-icingastatuswriter"></a> IcingaStatusWriter
-
-The IcingaStatusWriter feature periodically dumps the current status
-and performance data from Icinga 2 and all registered features into
-a defined JSON file.
-
-Example:
-
- object IcingaStatusWriter "status" {
- status_path = LocalStateDir + "/cache/icinga2/status.json"
- update_interval = 15s
- }
-
-Configuration Attributes:
-
- Name |Description
- --------------------------|--------------------------
- status\_path |**Optional.** Path to cluster status file. Defaults to LocalStateDir + "/cache/icinga2/status.json"
- update\_interval |**Optional.** The interval in which the status files are updated. Defaults to 15 seconds.
-
-
-## <a id="objecttype-apilistener"></a> ApiListener
-
-ApiListener objects are used for distributed monitoring setups
-specifying the certificate files used for ssl authorization.
-
-The `NodeName` constant must be defined in [constants.conf](5-configuring-icinga-2.md#constants-conf).
-
-Example:
-
- object ApiListener "api" {
- cert_path = SysconfDir + "/icinga2/pki/" + NodeName + ".crt"
- key_path = SysconfDir + "/icinga2/pki/" + NodeName + ".key"
- ca_path = SysconfDir + "/icinga2/pki/ca.crt"
- }
-
+ display_name |**Optional.** A short description of the user.
+ email |**Optional.** An email string for this user. Useful for notification commands.
+ pager |**Optional.** A pager string for this user. Useful for notification commands.
+ vars |**Optional.** A dictionary containing custom attributes that are specific to this user.
+ groups |**Optional.** An array of group names.
+ enable_notifications|**Optional.** Whether notifications are enabled for this user.
+ period |**Optional.** The name of a time period which determines when a notification for this user should be triggered. Not set by default.
+ types |**Optional.** A set of type filters when this notification should be triggered. By default everything is matched.
+ states |**Optional.** A set of state filters when this notification should be triggered. By default everything is matched.
+ zone |**Optional.** The zone this object is a member of.
-Configuration Attributes:
+Runtime Attributes:
- Name |Description
- --------------------------|--------------------------
- cert\_path |**Required.** Path to the public key.
- key\_path |**Required.** Path to the private key.
- ca\_path |**Required.** Path to the CA certificate file.
- crl\_path |**Optional.** Path to the CRL file.
- bind\_host |**Optional.** The IP address the api listener should be bound to. Defaults to `0.0.0.0`.
- bind\_port |**Optional.** The port the api listener should be bound to. Defaults to `5665`.
- accept\_config |**Optional.** Accept zone configuration. Defaults to `false`.
- accept\_commands |**Optional.** Accept remote commands. Defaults to `false`.
+ Name | Type | Description
+ --------------------------|---------------|-----------------
+ last\_notification | Number | When the last notification was sent for this user (as a UNIX timestamp).
+## <a id="objecttype-usergroup"></a> UserGroup
-## <a id="objecttype-endpoint"></a> Endpoint
+A user group.
-Endpoint objects are used to specify connection information for remote
-Icinga 2 instances.
+> **Best Practice**
+>
+> Assign user group members using the [group assign](19-language-reference.md#group-assign) rules.
Example:
- object Endpoint "icinga2b" {
- host = "192.168.5.46"
- port = 5665
+ object UserGroup "icingaadmins" {
+ display_name = "Icinga 2 Admin Group"
}
Configuration Attributes:
Name |Description
----------------|----------------
- host |**Optional.** The hostname/IP address of the remote Icinga 2 instance.
- port |**Optional.** The service name/port of the remote Icinga 2 instance. Defaults to `5665`.
- log_duration |**Optional.** Duration for keeping replay logs on connection loss. Defaults to `1d`.
+ display_name |**Optional.** A short description of the user group.
+ groups |**Optional.** An array of nested group names.
+ zone |**Optional.** The zone this object is a member of.
## <a id="objecttype-zone"></a> Zone
endpoints |**Optional.** Dictionary with endpoints located in this zone.
parent |**Optional.** The name of the parent zone.
global |**Optional.** Whether configuration files for this zone should be synced to all endpoints. Defaults to false.
-
projects / icinga2 / commitdiff