]> granicus.if.org Git - postgresql/commitdiff
Clean up assorted messiness around AllocateDir() usage.
authorTom Lane <tgl@sss.pgh.pa.us>
Mon, 4 Dec 2017 22:02:52 +0000 (17:02 -0500)
committerTom Lane <tgl@sss.pgh.pa.us>
Mon, 4 Dec 2017 22:02:52 +0000 (17:02 -0500)
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures.  It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode.  And it eliminates a lot of just plain redundant error-handling
code.

In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern

dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)

if they'd like to treat directory-open failures as mere LOG conditions
rather than errors.  Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.

Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine.  Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above.  (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.)  In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.

Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported.  There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.

Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming.  (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire.  If so, this function was broken for its
own purposes as well as breaking callers.)

And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.

Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless.  Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes.  The rest of this is
essentially cosmetic and need not get back-patched.

Michael Paquier, with a bit of additional work by me

Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com

src/backend/access/transam/xlog.c
src/backend/storage/file/fd.c
src/include/storage/fd.h

index 68109e25416ee9cbe9b71a984c38b81c21d120cc..a4f0320fcd4f58ba5dd91f1b522e89983706498f 100644 (file)
@@ -3597,10 +3597,16 @@ PreallocXlogFiles(XLogRecPtr endptr)
  * existed while the server has been running, as this function always
  * succeeds if no WAL segments have been removed since startup.
  * 'tli' is only used in the error message.
+ *
+ * Note: this function guarantees to keep errno unchanged on return.
+ * This supports callers that use this to possibly deliver a better
+ * error message about a missing file, while still being able to throw
+ * a normal file-access error afterwards, if this does return.
  */
 void
 CheckXLogRemoved(XLogSegNo segno, TimeLineID tli)
 {
+       int                     save_errno = errno;
        XLogSegNo       lastRemovedSegNo;
 
        SpinLockAcquire(&XLogCtl->info_lck);
@@ -3612,11 +3618,13 @@ CheckXLogRemoved(XLogSegNo segno, TimeLineID tli)
                char            filename[MAXFNAMELEN];
 
                XLogFileName(filename, tli, segno);
+               errno = save_errno;
                ereport(ERROR,
                                (errcode_for_file_access(),
                                 errmsg("requested WAL segment %s has already been removed",
                                                filename)));
        }
+       errno = save_errno;
 }
 
 /*
index b3020b11c5d344e3fb56fd79bc65380c7c7a58f1..9354652d914b729070869e5d9e1ef8a4ef0f997e 100644 (file)
@@ -304,7 +304,6 @@ static int  FileAccess(File file);
 static File OpenTemporaryFileInTablespace(Oid tblspcOid, bool rejectError);
 static bool reserveAllocatedDesc(void);
 static int     FreeDesc(AllocateDesc *desc);
-static struct dirent *ReadDirExtended(DIR *dir, const char *dirname, int elevel);
 
 static void AtProcExit_Files(int code, Datum arg);
 static void CleanupTempFiles(bool isProcExit);
@@ -2284,6 +2283,10 @@ CloseTransientFile(int fd)
  * necessary to open the directory, and with closing it after an elog.
  * When done, call FreeDir rather than closedir.
  *
+ * Returns NULL, with errno set, on failure.  Note that failure detection
+ * is commonly left to the following call of ReadDir or ReadDirExtended;
+ * see the comments for ReadDir.
+ *
  * Ideally this should be the *only* direct call of opendir() in the backend.
  */
 DIR *
@@ -2346,8 +2349,8 @@ TryAgain:
  *             FreeDir(dir);
  *
  * since a NULL dir parameter is taken as indicating AllocateDir failed.
- * (Make sure errno hasn't been changed since AllocateDir if you use this
- * shortcut.)
+ * (Make sure errno isn't changed between AllocateDir and ReadDir if you
+ * use this shortcut.)
  *
  * The pathname passed to AllocateDir must be passed to this routine too,
  * but it is only used for error reporting.
@@ -2359,10 +2362,15 @@ ReadDir(DIR *dir, const char *dirname)
 }
 
 /*
- * Alternate version that allows caller to specify the elevel for any
- * error report.  If elevel < ERROR, returns NULL on any error.
+ * Alternate version of ReadDir that allows caller to specify the elevel
+ * for any error report (whether it's reporting an initial failure of
+ * AllocateDir or a subsequent directory read failure).
+ *
+ * If elevel < ERROR, returns NULL after any error.  With the normal coding
+ * pattern, this will result in falling out of the loop immediately as
+ * though the directory contained no (more) entries.
  */
-static struct dirent *
+struct dirent *
 ReadDirExtended(DIR *dir, const char *dirname, int elevel)
 {
        struct dirent *dent;
@@ -2392,14 +2400,22 @@ ReadDirExtended(DIR *dir, const char *dirname, int elevel)
 /*
  * Close a directory opened with AllocateDir.
  *
- * Note we do not check closedir's return value --- it is up to the caller
- * to handle close errors.
+ * Returns closedir's return value (with errno set if it's not 0).
+ * Note we do not check the return value --- it is up to the caller
+ * to handle close errors if wanted.
+ *
+ * Does nothing if dir == NULL; we assume that directory open failure was
+ * already reported if desired.
  */
 int
 FreeDir(DIR *dir)
 {
        int                     i;
 
+       /* Nothing to do if AllocateDir failed */
+       if (dir == NULL)
+               return 0;
+
        DO_DB(elog(LOG, "FreeDir: Allocated %d", numAllocatedDescs));
 
        /* Remove dir from list of allocated dirs, if it's present */
index cbc2224685ebb52570420debf68191148d378e69..59e168d2b686c0cf1327699a6724d6d2ecb11186 100644 (file)
@@ -91,6 +91,8 @@ extern int    ClosePipeStream(FILE *file);
 /* Operations to allow use of the <dirent.h> library routines */
 extern DIR *AllocateDir(const char *dirname);
 extern struct dirent *ReadDir(DIR *dir, const char *dirname);
+extern struct dirent *ReadDirExtended(DIR *dir, const char *dirname,
+                               int elevel);
 extern int     FreeDir(DIR *dir);
 
 /* Operations to allow use of a plain kernel FD, with automatic cleanup */