-#\r
-# Make sure all needed macro's are defined\r
-#\r
-\r
-#\r
-# Get the 'head' of the build environment if necessary. This includes default\r
-# targets and paths to tools\r
-#\r
-\r
-ifndef EnvironmentDefined\r
-include $(AP_WORK)\build\NWGNUhead.inc\r
-endif\r
-\r
-#\r
-# These directories will be at the beginning of the include list, followed by\r
-# INCDIRS\r
-#\r
-XINCDIRS += \\r
- $(AP_WORK)/include \\r
- $(NWOS) \\r
- $(AP_WORK)/modules/arch/netware \\r
- $(AP_WORK)/modules/http \\r
- $(APR)/include \\r
- $(APRUTIL)/include \\r
- $(APR) \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will come after CFLAGS\r
-#\r
-XCFLAGS += \\r
- -prefix pre_nw.h \\r
- $(EOLIST)\r
-\r
-#\r
-# These defines will come after DEFINES\r
-#\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will be added to the link.opt file\r
-#\r
-XLFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These values will be appended to the correct variables based on the value of\r
-# RELEASE\r
-#\r
-ifeq "$(RELEASE)" "debug"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "noopt"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "release"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-#\r
-# These are used by the link target if an NLM is being generated\r
-# This is used by the link 'name' directive to name the nlm. If left blank\r
-# TARGET_nlm (see below) will be used.\r
-#\r
-NLM_NAME = autoindex\r
-\r
-#\r
-# This is used by the link '-desc ' directive. \r
-# If left blank, NLM_NAME will be used.\r
-#\r
-NLM_DESCRIPTION = Apache $(VERSION_STR) Autoindex Module\r
-\r
-#\r
-# This is used by the '-threadname' directive. If left blank,\r
-# NLM_NAME Thread will be used.\r
-#\r
-NLM_THREAD_NAME = Autoindex Module\r
-\r
-#\r
-# If this is specified, it will override VERSION value in \r
-# $(AP_WORK)\build\NWGNUenvironment.inc\r
-#\r
-NLM_VERSION =\r
-\r
-#\r
-# If this is specified, it will override the default of 64K\r
-#\r
-NLM_STACK_SIZE = 8192\r
-\r
-\r
-#\r
-# If this is specified it will be used by the link '-entry' directive\r
-#\r
-NLM_ENTRY_SYM = _LibCPrelude\r
-\r
-#\r
-# If this is specified it will be used by the link '-exit' directive\r
-#\r
-NLM_EXIT_SYM = _LibCPostlude\r
-\r
-#\r
-# If this is specified it will be used by the link '-check' directive\r
-#\r
-NLM_CHECK_SYM =\r
-\r
-#\r
-# If these are specified it will be used by the link '-flags' directive\r
-#\r
-NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION\r
-\r
-#\r
-# If this is specified it will be linked in with the XDCData option in the def \r
-# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled\r
-# by setting APACHE_UNIPROC in the environment\r
-#\r
-XDCDATA = \r
-\r
-#\r
-# If there is an NLM target, put it here\r
-#\r
-TARGET_nlm = \\r
- $(OBJDIR)/autoindex.nlm \\r
- $(EOLIST)\r
-\r
-#\r
-# If there is an LIB target, put it here\r
-#\r
-TARGET_lib = \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the OBJ files needed to create the NLM target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_nlm_objs = \\r
- $(OBJDIR)/mod_autoindex.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the LIB files needed to create the NLM target above.\r
-# These will be added as a library command in the link.opt file.\r
-#\r
-FILES_nlm_libs = \\r
- libcpre.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the modules that the above NLM target depends on to load.\r
-# These will be added as a module command in the link.opt file.\r
-#\r
-FILES_nlm_modules = \\r
- aprlib \\r
- libc \\r
- $(EOLIST)\r
-\r
-#\r
-# If the nlm has a msg file, put it's path here\r
-#\r
-FILE_nlm_msg =\r
- \r
-#\r
-# If the nlm has a hlp file put it's path here\r
-#\r
-FILE_nlm_hlp =\r
-\r
-#\r
-# If this is specified, it will override $(NWOS)\copyright.txt.\r
-#\r
-FILE_nlm_copyright =\r
-\r
-#\r
-# Any additional imports go here\r
-#\r
-FILES_nlm_Ximports = \\r
- @$(APR)/aprlib.imp \\r
- @$(NWOS)/httpd.imp \\r
- @libc.imp \\r
- $(EOLIST)\r
- \r
-# \r
-# Any symbols exported to here\r
-#\r
-FILES_nlm_exports = \\r
- autoindex_module \\r
- $(EOLIST)\r
- \r
-# \r
-# These are the OBJ files needed to create the LIB target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_lib_objs = \\r
- $(EOLIST)\r
-\r
-#\r
-# implement targets and dependancies (leave this section alone)\r
-#\r
-\r
-libs :: $(OBJDIR) $(TARGET_lib)\r
-\r
-nlms :: libs $(TARGET_nlm)\r
-\r
-#\r
-# Updated this target to create necessary directories and copy files to the \r
-# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
-#\r
-install :: nlms FORCE\r
-\r
-#\r
-# Any specialized rules here\r
-#\r
-\r
-#\r
-# Include the 'tail' makefile that has targets that depend on variables defined\r
-# in this makefile\r
-#\r
-\r
-include $(AP_WORK)\build\NWGNUtail.inc\r
-\r
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP_WORK)/include \
+ $(NWOS) \
+ $(AP_WORK)/modules/arch/netware \
+ $(AP_WORK)/modules/http \
+ $(APR)/include \
+ $(APRUTIL)/include \
+ $(APR) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ -prefix pre_nw.h \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = autoindex
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache $(VERSION_STR) Autoindex Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Autoindex Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def
+# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA =
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/autoindex.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_autoindex.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ libcpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ aprlib \
+ libc \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @$(APR)/aprlib.imp \
+ @$(NWOS)/httpd.imp \
+ @libc.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ autoindex_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+
-#\r
-# Make sure all needed macro's are defined\r
-#\r
-\r
-#\r
-# Get the 'head' of the build environment if necessary. This includes default\r
-# targets and paths to tools\r
-#\r
-\r
-ifndef EnvironmentDefined\r
-include $(AP_WORK)\build\NWGNUhead.inc\r
-endif\r
-\r
-#\r
-# These directories will be at the beginning of the include list, followed by\r
-# INCDIRS\r
-#\r
-XINCDIRS += \\r
- $(AP_WORK)/include \\r
- $(NWOS) \\r
- $(AP_WORK)/modules/arch/netware \\r
- $(AP_WORK)/modules/http \\r
- $(APR)/include \\r
- $(APRUTIL)/include \\r
- $(APR) \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will come after CFLAGS\r
-#\r
-XCFLAGS += \\r
- -prefix pre_nw.h \\r
- $(EOLIST)\r
-\r
-#\r
-# These defines will come after DEFINES\r
-#\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will be added to the link.opt file\r
-#\r
-XLFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These values will be appended to the correct variables based on the value of\r
-# RELEASE\r
-#\r
-ifeq "$(RELEASE)" "debug"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "noopt"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "release"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-#\r
-# These are used by the link target if an NLM is being generated\r
-# This is used by the link 'name' directive to name the nlm. If left blank\r
-# TARGET_nlm (see below) will be used.\r
-#\r
-NLM_NAME = mod_asis\r
-\r
-#\r
-# This is used by the link '-desc ' directive. \r
-# If left blank, NLM_NAME will be used.\r
-#\r
-NLM_DESCRIPTION = Apache $(VERSION_STR) ASIS Module\r
-\r
-#\r
-# This is used by the '-threadname' directive. If left blank,\r
-# NLM_NAME Thread will be used.\r
-#\r
-NLM_THREAD_NAME = Mod_asis Module\r
-\r
-#\r
-# If this is specified, it will override VERSION value in \r
-# $(AP_WORK)\build\NWGNUenvironment.inc\r
-#\r
-NLM_VERSION =\r
-\r
-#\r
-# If this is specified, it will override the default of 64K\r
-#\r
-NLM_STACK_SIZE = 8192\r
-\r
-\r
-#\r
-# If this is specified it will be used by the link '-entry' directive\r
-#\r
-NLM_ENTRY_SYM = _LibCPrelude\r
-\r
-#\r
-# If this is specified it will be used by the link '-exit' directive\r
-#\r
-NLM_EXIT_SYM = _LibCPostlude\r
-\r
-#\r
-# If this is specified it will be used by the link '-check' directive\r
-#\r
-NLM_CHECK_SYM =\r
-\r
-#\r
-# If these are specified it will be used by the link '-flags' directive\r
-#\r
-NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION\r
-\r
-#\r
-# If this is specified it will be linked in with the XDCData option in the def \r
-# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled\r
-# by setting APACHE_UNIPROC in the environment\r
-#\r
-XDCDATA = \r
-\r
-#\r
-# If there is an NLM target, put it here\r
-#\r
-TARGET_nlm = \\r
- $(OBJDIR)/mod_asis.nlm \\r
- $(EOLIST)\r
-\r
-#\r
-# If there is an LIB target, put it here\r
-#\r
-TARGET_lib = \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the OBJ files needed to create the NLM target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_nlm_objs = \\r
- $(OBJDIR)/mod_asis.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the LIB files needed to create the NLM target above.\r
-# These will be added as a library command in the link.opt file.\r
-#\r
-FILES_nlm_libs = \\r
- libcpre.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the modules that the above NLM target depends on to load.\r
-# These will be added as a module command in the link.opt file.\r
-#\r
-FILES_nlm_modules = \\r
- aprlib \\r
- libc \\r
- $(EOLIST)\r
-\r
-#\r
-# If the nlm has a msg file, put it's path here\r
-#\r
-FILE_nlm_msg =\r
- \r
-#\r
-# If the nlm has a hlp file put it's path here\r
-#\r
-FILE_nlm_hlp =\r
-\r
-#\r
-# If this is specified, it will override $(NWOS)\copyright.txt.\r
-#\r
-FILE_nlm_copyright =\r
-\r
-#\r
-# Any additional imports go here\r
-#\r
-FILES_nlm_Ximports = \\r
- @$(APR)/aprlib.imp \\r
- @$(NWOS)/httpd.imp \\r
- @libc.imp \\r
- $(EOLIST)\r
- \r
-# \r
-# Any symbols exported to here\r
-#\r
-FILES_nlm_exports = \\r
- asis_module \\r
- $(EOLIST)\r
- \r
-# \r
-# These are the OBJ files needed to create the LIB target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_lib_objs = \\r
- $(EOLIST)\r
-\r
-#\r
-# implement targets and dependancies (leave this section alone)\r
-#\r
-\r
-libs :: $(OBJDIR) $(TARGET_lib)\r
-\r
-nlms :: libs $(TARGET_nlm)\r
-\r
-#\r
-# Updated this target to create necessary directories and copy files to the \r
-# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
-#\r
-install :: nlms FORCE\r
-\r
-#\r
-# Any specialized rules here\r
-#\r
-\r
-#\r
-# Include the 'tail' makefile that has targets that depend on variables defined\r
-# in this makefile\r
-#\r
-\r
-include $(AP_WORK)\build\NWGNUtail.inc\r
-\r
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP_WORK)/include \
+ $(NWOS) \
+ $(AP_WORK)/modules/arch/netware \
+ $(AP_WORK)/modules/http \
+ $(APR)/include \
+ $(APRUTIL)/include \
+ $(APR) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ -prefix pre_nw.h \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = mod_asis
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache $(VERSION_STR) ASIS Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Mod_asis Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def
+# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA =
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/mod_asis.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_asis.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ libcpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ aprlib \
+ libc \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @$(APR)/aprlib.imp \
+ @$(NWOS)/httpd.imp \
+ @libc.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ asis_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+
-#\r
-# Make sure all needed macro's are defined\r
-#\r
-\r
-#\r
-# Get the 'head' of the build environment if necessary. This includes default\r
-# targets and paths to tools\r
-#\r
-\r
-ifndef EnvironmentDefined\r
-include $(AP_WORK)\build\NWGNUhead.inc\r
-endif\r
-\r
-#\r
-# These directories will be at the beginning of the include list, followed by\r
-# INCDIRS\r
-#\r
-XINCDIRS += \\r
- $(AP_WORK)/include \\r
- $(NWOS) \\r
- $(AP_WORK)/modules/arch/netware \\r
- $(AP_WORK)/modules/http \\r
- $(AP_WORK)/modules/filters \\r
- $(APR)/include \\r
- $(APRUTIL)/include \\r
- $(APR) \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will come after CFLAGS\r
-#\r
-XCFLAGS += \\r
- -prefix pre_nw.h \\r
- $(EOLIST)\r
-\r
-#\r
-# These defines will come after DEFINES\r
-#\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will be added to the link.opt file\r
-#\r
-XLFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These values will be appended to the correct variables based on the value of\r
-# RELEASE\r
-#\r
-ifeq "$(RELEASE)" "debug"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "noopt"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "release"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-#\r
-# These are used by the link target if an NLM is being generated\r
-# This is used by the link 'name' directive to name the nlm. If left blank\r
-# TARGET_nlm (see below) will be used.\r
-#\r
-NLM_NAME = mod_cgi\r
-\r
-#\r
-# This is used by the link '-desc ' directive. \r
-# If left blank, NLM_NAME will be used.\r
-#\r
-NLM_DESCRIPTION = Apache $(VERSION_STR) CGI Module\r
-\r
-#\r
-# This is used by the '-threadname' directive. If left blank,\r
-# NLM_NAME Thread will be used.\r
-#\r
-NLM_THREAD_NAME = Mod_cgi Module\r
-\r
-#\r
-# If this is specified, it will override VERSION value in \r
-# $(AP_WORK)\build\NWGNUenvironment.inc\r
-#\r
-NLM_VERSION =\r
-\r
-#\r
-# If this is specified, it will override the default of 64K\r
-#\r
-NLM_STACK_SIZE = 8192\r
-\r
-\r
-#\r
-# If this is specified it will be used by the link '-entry' directive\r
-#\r
-NLM_ENTRY_SYM = _LibCPrelude\r
-\r
-#\r
-# If this is specified it will be used by the link '-exit' directive\r
-#\r
-NLM_EXIT_SYM = _LibCPostlude\r
-\r
-#\r
-# If this is specified it will be used by the link '-check' directive\r
-#\r
-NLM_CHECK_SYM =\r
-\r
-#\r
-# If these are specified it will be used by the link '-flags' directive\r
-#\r
-NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION\r
-\r
-#\r
-# If this is specified it will be linked in with the XDCData option in the def \r
-# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled\r
-# by setting APACHE_UNIPROC in the environment\r
-#\r
-XDCDATA = \r
-\r
-#\r
-# If there is an NLM target, put it here\r
-#\r
-TARGET_nlm = \\r
- $(OBJDIR)/mod_cgi.nlm \\r
- $(EOLIST)\r
-\r
-#\r
-# If there is an LIB target, put it here\r
-#\r
-TARGET_lib = \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the OBJ files needed to create the NLM target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_nlm_objs = \\r
- $(OBJDIR)/mod_cgi.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the LIB files needed to create the NLM target above.\r
-# These will be added as a library command in the link.opt file.\r
-#\r
-FILES_nlm_libs = \\r
- libcpre.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the modules that the above NLM target depends on to load.\r
-# These will be added as a module command in the link.opt file.\r
-#\r
-FILES_nlm_modules = \\r
- aprlib \\r
- libc \\r
- $(EOLIST)\r
-\r
-#\r
-# If the nlm has a msg file, put it's path here\r
-#\r
-FILE_nlm_msg =\r
- \r
-#\r
-# If the nlm has a hlp file put it's path here\r
-#\r
-FILE_nlm_hlp =\r
-\r
-#\r
-# If this is specified, it will override $(NWOS)\copyright.txt.\r
-#\r
-FILE_nlm_copyright =\r
-\r
-#\r
-# Any additional imports go here\r
-#\r
-FILES_nlm_Ximports = \\r
- @$(APR)/aprlib.imp \\r
- @$(NWOS)/httpd.imp \\r
- @libc.imp \\r
- $(EOLIST)\r
- \r
-# \r
-# Any symbols exported to here\r
-#\r
-FILES_nlm_exports = \\r
- cgi_module \\r
- $(EOLIST)\r
- \r
-# \r
-# These are the OBJ files needed to create the LIB target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_lib_objs = \\r
- $(EOLIST)\r
-\r
-#\r
-# implement targets and dependancies (leave this section alone)\r
-#\r
-\r
-libs :: $(OBJDIR) $(TARGET_lib)\r
-\r
-nlms :: libs $(TARGET_nlm)\r
-\r
-#\r
-# Updated this target to create necessary directories and copy files to the \r
-# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
-#\r
-install :: nlms FORCE\r
-\r
-#\r
-# Any specialized rules here\r
-#\r
-\r
-#\r
-# Include the 'tail' makefile that has targets that depend on variables defined\r
-# in this makefile\r
-#\r
-\r
-include $(AP_WORK)\build\NWGNUtail.inc\r
-\r
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP_WORK)/include \
+ $(NWOS) \
+ $(AP_WORK)/modules/arch/netware \
+ $(AP_WORK)/modules/http \
+ $(AP_WORK)/modules/filters \
+ $(APR)/include \
+ $(APRUTIL)/include \
+ $(APR) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ -prefix pre_nw.h \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = mod_cgi
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache $(VERSION_STR) CGI Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Mod_cgi Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def
+# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA =
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/mod_cgi.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_cgi.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ libcpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ aprlib \
+ libc \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @$(APR)/aprlib.imp \
+ @$(NWOS)/httpd.imp \
+ @libc.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ cgi_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+
-#\r
-# Make sure all needed macro's are defined\r
-#\r
-\r
-#\r
-# Get the 'head' of the build environment if necessary. This includes default\r
-# targets and paths to tools\r
-#\r
-\r
-ifndef EnvironmentDefined\r
-include $(AP_WORK)\build\NWGNUhead.inc\r
-endif\r
-\r
-#\r
-# These directories will be at the beginning of the include list, followed by\r
-# INCDIRS\r
-#\r
-XINCDIRS += \\r
- $(AP_WORK)/include \\r
- $(NWOS) \\r
- $(AP_WORK)/modules/arch/netware \\r
- $(APR)/include \\r
- $(APRUTIL)/include \\r
- $(APR) \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will come after CFLAGS\r
-#\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These defines will come after DEFINES\r
-#\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will be added to the link.opt file\r
-#\r
-XLFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These values will be appended to the correct variables based on the value of\r
-# RELEASE\r
-#\r
-ifeq "$(RELEASE)" "debug"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "noopt"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "release"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-#\r
-# These are used by the link target if an NLM is being generated\r
-# This is used by the link 'name' directive to name the nlm. If left blank\r
-# TARGET_nlm (see below) will be used.\r
-#\r
-NLM_NAME = actions\r
-\r
-#\r
-# This is used by the link '-desc ' directive. \r
-# If left blank, NLM_NAME will be used.\r
-#\r
-NLM_DESCRIPTION = Apache $(VERSION_STR) Actions Module\r
-\r
-#\r
-# This is used by the '-threadname' directive. If left blank,\r
-# NLM_NAME Thread will be used.\r
-#\r
-NLM_THREAD_NAME = Actions Module\r
-\r
-#\r
-# If this is specified, it will override VERSION value in \r
-# $(AP_WORK)\build\NWGNUenvironment.inc\r
-#\r
-NLM_VERSION =\r
-\r
-#\r
-# If this is specified, it will override the default of 64K\r
-#\r
-NLM_STACK_SIZE = 8192\r
-\r
-\r
-#\r
-# If this is specified it will be used by the link '-entry' directive\r
-#\r
-NLM_ENTRY_SYM = _LibCPrelude\r
-\r
-#\r
-# If this is specified it will be used by the link '-exit' directive\r
-#\r
-NLM_EXIT_SYM = _LibCPostlude\r
-\r
-#\r
-# If this is specified it will be used by the link '-check' directive\r
-#\r
-NLM_CHECK_SYM =\r
-\r
-#\r
-# If these are specified it will be used by the link '-flags' directive\r
-#\r
-NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION\r
-\r
-#\r
-# If this is specified it will be linked in with the XDCData option in the def \r
-# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled\r
-# by setting APACHE_UNIPROC in the environment\r
-#\r
-XDCDATA = \r
-\r
-#\r
-# If there is an NLM target, put it here\r
-#\r
-TARGET_nlm = \\r
- $(OBJDIR)/actions.nlm \\r
- $(EOLIST)\r
-\r
-#\r
-# If there is an LIB target, put it here\r
-#\r
-TARGET_lib = \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the OBJ files needed to create the NLM target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_nlm_objs = \\r
- $(OBJDIR)/mod_actions.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the LIB files needed to create the NLM target above.\r
-# These will be added as a library command in the link.opt file.\r
-#\r
-FILES_nlm_libs = \\r
- libcpre.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the modules that the above NLM target depends on to load.\r
-# These will be added as a module command in the link.opt file.\r
-#\r
-FILES_nlm_modules = \\r
- aprlib \\r
- libc \\r
- $(EOLIST)\r
-\r
-#\r
-# If the nlm has a msg file, put it's path here\r
-#\r
-FILE_nlm_msg =\r
- \r
-#\r
-# If the nlm has a hlp file put it's path here\r
-#\r
-FILE_nlm_hlp =\r
-\r
-#\r
-# If this is specified, it will override $(NWOS)\copyright.txt.\r
-#\r
-FILE_nlm_copyright =\r
-\r
-#\r
-# Any additional imports go here\r
-#\r
-FILES_nlm_Ximports = \\r
- @$(APR)/aprlib.imp \\r
- @$(NWOS)/httpd.imp \\r
- @libc.imp \\r
- $(EOLIST)\r
- \r
-# \r
-# Any symbols exported to here\r
-#\r
-FILES_nlm_exports = \\r
- actions_module \\r
- $(EOLIST)\r
- \r
-# \r
-# These are the OBJ files needed to create the LIB target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_lib_objs = \\r
- $(EOLIST)\r
-\r
-#\r
-# implement targets and dependancies (leave this section alone)\r
-#\r
-\r
-libs :: $(OBJDIR) $(TARGET_lib)\r
-\r
-nlms :: libs $(TARGET_nlm)\r
-\r
-#\r
-# Updated this target to create necessary directories and copy files to the \r
-# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
-#\r
-install :: nlms FORCE\r
-\r
-#\r
-# Any specialized rules here\r
-#\r
-\r
-#\r
-# Include the 'tail' makefile that has targets that depend on variables defined\r
-# in this makefile\r
-#\r
-\r
-include $(AP_WORK)\build\NWGNUtail.inc\r
-\r
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP_WORK)/include \
+ $(NWOS) \
+ $(AP_WORK)/modules/arch/netware \
+ $(APR)/include \
+ $(APRUTIL)/include \
+ $(APR) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = actions
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache $(VERSION_STR) Actions Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Actions Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def
+# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA =
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/actions.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_actions.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ libcpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ aprlib \
+ libc \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @$(APR)/aprlib.imp \
+ @$(NWOS)/httpd.imp \
+ @libc.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ actions_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+
-#\r
-# Make sure all needed macro's are defined\r
-#\r
-\r
-#\r
-# Get the 'head' of the build environment if necessary. This includes default\r
-# targets and paths to tools\r
-#\r
-\r
-ifndef EnvironmentDefined\r
-include $(AP_WORK)\build\NWGNUhead.inc\r
-endif\r
-\r
-#\r
-# These directories will be at the beginning of the include list, followed by\r
-# INCDIRS\r
-#\r
-XINCDIRS += \\r
- $(AP_WORK)/include \\r
- $(NWOS) \\r
- $(AP_WORK)/modules/arch/netware \\r
- $(AP_WORK)/modules/http \\r
- $(APR)/include \\r
- $(APRUTIL)/include \\r
- $(APR) \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will come after CFLAGS\r
-#\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These defines will come after DEFINES\r
-#\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will be added to the link.opt file\r
-#\r
-XLFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These values will be appended to the correct variables based on the value of\r
-# RELEASE\r
-#\r
-ifeq "$(RELEASE)" "debug"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "noopt"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "release"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-#\r
-# These are used by the link target if an NLM is being generated\r
-# This is used by the link 'name' directive to name the nlm. If left blank\r
-# TARGET_nlm (see below) will be used.\r
-#\r
-NLM_NAME = imagemap\r
-\r
-#\r
-# This is used by the link '-desc ' directive. \r
-# If left blank, NLM_NAME will be used.\r
-#\r
-NLM_DESCRIPTION = Apache $(VERSION_STR) Image Map Module\r
-\r
-#\r
-# This is used by the '-threadname' directive. If left blank,\r
-# NLM_NAME Thread will be used.\r
-#\r
-NLM_THREAD_NAME = Image Map Module\r
-\r
-#\r
-# If this is specified, it will override VERSION value in \r
-# $(AP_WORK)\build\NWGNUenvironment.inc\r
-#\r
-NLM_VERSION =\r
-\r
-#\r
-# If this is specified, it will override the default of 64K\r
-#\r
-NLM_STACK_SIZE = 8192\r
-\r
-\r
-#\r
-# If this is specified it will be used by the link '-entry' directive\r
-#\r
-NLM_ENTRY_SYM = _LibCPrelude\r
-\r
-#\r
-# If this is specified it will be used by the link '-exit' directive\r
-#\r
-NLM_EXIT_SYM = _LibCPostlude\r
-\r
-#\r
-# If this is specified it will be used by the link '-check' directive\r
-#\r
-NLM_CHECK_SYM =\r
-\r
-#\r
-# If these are specified it will be used by the link '-flags' directive\r
-#\r
-NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION\r
-\r
-#\r
-# If this is specified it will be linked in with the XDCData option in the def \r
-# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled\r
-# by setting APACHE_UNIPROC in the environment\r
-#\r
-XDCDATA = \r
-\r
-#\r
-# If there is an NLM target, put it here\r
-#\r
-TARGET_nlm = \\r
- $(OBJDIR)/imagemap.nlm \\r
- $(EOLIST)\r
-\r
-#\r
-# If there is an LIB target, put it here\r
-#\r
-TARGET_lib = \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the OBJ files needed to create the NLM target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_nlm_objs = \\r
- $(OBJDIR)/mod_imagemap.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the LIB files needed to create the NLM target above.\r
-# These will be added as a library command in the link.opt file.\r
-#\r
-FILES_nlm_libs = \\r
- libcpre.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the modules that the above NLM target depends on to load.\r
-# These will be added as a module command in the link.opt file.\r
-#\r
-FILES_nlm_modules = \\r
- aprlib \\r
- libc \\r
- $(EOLIST)\r
-\r
-#\r
-# If the nlm has a msg file, put it's path here\r
-#\r
-FILE_nlm_msg =\r
- \r
-#\r
-# If the nlm has a hlp file put it's path here\r
-#\r
-FILE_nlm_hlp =\r
-\r
-#\r
-# If this is specified, it will override $(NWOS)\copyright.txt.\r
-#\r
-FILE_nlm_copyright =\r
-\r
-#\r
-# Any additional imports go here\r
-#\r
-FILES_nlm_Ximports = \\r
- @$(APR)/aprlib.imp \\r
- @$(NWOS)/httpd.imp \\r
- @libc.imp \\r
- $(EOLIST)\r
- \r
-# \r
-# Any symbols exported to here\r
-#\r
-FILES_nlm_exports = \\r
- imagemap_module \\r
- $(EOLIST)\r
- \r
-# \r
-# These are the OBJ files needed to create the LIB target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_lib_objs = \\r
- $(EOLIST)\r
-\r
-#\r
-# implement targets and dependancies (leave this section alone)\r
-#\r
-\r
-libs :: $(OBJDIR) $(TARGET_lib)\r
-\r
-nlms :: libs $(TARGET_nlm)\r
-\r
-#\r
-# Updated this target to create necessary directories and copy files to the \r
-# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
-#\r
-install :: nlms FORCE\r
-\r
-#\r
-# Any specialized rules here\r
-#\r
-\r
-#\r
-# Include the 'tail' makefile that has targets that depend on variables defined\r
-# in this makefile\r
-#\r
-\r
-include $(AP_WORK)\build\NWGNUtail.inc\r
-\r
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP_WORK)/include \
+ $(NWOS) \
+ $(AP_WORK)/modules/arch/netware \
+ $(AP_WORK)/modules/http \
+ $(APR)/include \
+ $(APRUTIL)/include \
+ $(APR) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = imagemap
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache $(VERSION_STR) Image Map Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Image Map Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def
+# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA =
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/imagemap.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_imagemap.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ libcpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ aprlib \
+ libc \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @$(APR)/aprlib.imp \
+ @$(NWOS)/httpd.imp \
+ @libc.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ imagemap_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+
-#\r
-# Make sure all needed macro's are defined\r
-#\r
-\r
-#\r
-# Get the 'head' of the build environment if necessary. This includes default\r
-# targets and paths to tools\r
-#\r
-\r
-ifndef EnvironmentDefined\r
-include $(AP_WORK)\build\NWGNUhead.inc\r
-endif\r
-\r
-#\r
-# These directories will be at the beginning of the include list, followed by\r
-# INCDIRS\r
-#\r
-XINCDIRS += \\r
- $(AP_WORK)/include \\r
- $(NWOS) \\r
- $(AP_WORK)/modules/arch/netware \\r
- $(AP_WORK)/modules/http \\r
- $(APR)/include \\r
- $(APRUTIL)/include \\r
- $(APR) \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will come after CFLAGS\r
-#\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These defines will come after DEFINES\r
-#\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-#\r
-# These flags will be added to the link.opt file\r
-#\r
-XLFLAGS += \\r
- $(EOLIST)\r
-\r
-#\r
-# These values will be appended to the correct variables based on the value of\r
-# RELEASE\r
-#\r
-ifeq "$(RELEASE)" "debug"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "noopt"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-ifeq "$(RELEASE)" "release"\r
-XINCDIRS += \\r
- $(EOLIST)\r
-\r
-XCFLAGS += \\r
- $(EOLIST)\r
-\r
-XDEFINES += \\r
- $(EOLIST)\r
-\r
-XLFLAGS += \\r
- $(EOLIST)\r
-endif\r
-\r
-#\r
-# These are used by the link target if an NLM is being generated\r
-# This is used by the link 'name' directive to name the nlm. If left blank\r
-# TARGET_nlm (see below) will be used.\r
-#\r
-NLM_NAME = userdir\r
-\r
-#\r
-# This is used by the link '-desc ' directive. \r
-# If left blank, NLM_NAME will be used.\r
-#\r
-NLM_DESCRIPTION = Apache $(VERSION_STR) User Dir Module\r
-\r
-#\r
-# This is used by the '-threadname' directive. If left blank,\r
-# NLM_NAME Thread will be used.\r
-#\r
-NLM_THREAD_NAME = UserDir Module\r
-\r
-#\r
-# If this is specified, it will override VERSION value in \r
-# $(AP_WORK)\build\NWGNUenvironment.inc\r
-#\r
-NLM_VERSION =\r
-\r
-#\r
-# If this is specified, it will override the default of 64K\r
-#\r
-NLM_STACK_SIZE = 8192\r
-\r
-\r
-#\r
-# If this is specified it will be used by the link '-entry' directive\r
-#\r
-NLM_ENTRY_SYM = _LibCPrelude\r
-\r
-#\r
-# If this is specified it will be used by the link '-exit' directive\r
-#\r
-NLM_EXIT_SYM = _LibCPostlude\r
-\r
-#\r
-# If this is specified it will be used by the link '-check' directive\r
-#\r
-NLM_CHECK_SYM =\r
-\r
-#\r
-# If these are specified it will be used by the link '-flags' directive\r
-#\r
-NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION\r
-\r
-#\r
-# If this is specified it will be linked in with the XDCData option in the def \r
-# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled\r
-# by setting APACHE_UNIPROC in the environment\r
-#\r
-XDCDATA = \r
-\r
-#\r
-# If there is an NLM target, put it here\r
-#\r
-TARGET_nlm = \\r
- $(OBJDIR)/userdir.nlm \\r
- $(EOLIST)\r
-\r
-#\r
-# If there is an LIB target, put it here\r
-#\r
-TARGET_lib = \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the OBJ files needed to create the NLM target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_nlm_objs = \\r
- $(OBJDIR)/mod_userdir.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the LIB files needed to create the NLM target above.\r
-# These will be added as a library command in the link.opt file.\r
-#\r
-FILES_nlm_libs = \\r
- libcpre.o \\r
- $(EOLIST)\r
-\r
-#\r
-# These are the modules that the above NLM target depends on to load.\r
-# These will be added as a module command in the link.opt file.\r
-#\r
-FILES_nlm_modules = \\r
- aprlib \\r
- libc \\r
- $(EOLIST)\r
-\r
-#\r
-# If the nlm has a msg file, put it's path here\r
-#\r
-FILE_nlm_msg =\r
- \r
-#\r
-# If the nlm has a hlp file put it's path here\r
-#\r
-FILE_nlm_hlp =\r
-\r
-#\r
-# If this is specified, it will override $(NWOS)\copyright.txt.\r
-#\r
-FILE_nlm_copyright =\r
-\r
-#\r
-# Any additional imports go here\r
-#\r
-FILES_nlm_Ximports = \\r
- @$(APR)/aprlib.imp \\r
- @$(NWOS)/httpd.imp \\r
- @libc.imp \\r
- $(EOLIST)\r
- \r
-# \r
-# Any symbols exported to here\r
-#\r
-FILES_nlm_exports = \\r
- userdir_module \\r
- $(EOLIST)\r
- \r
-# \r
-# These are the OBJ files needed to create the LIB target above.\r
-# Paths must all use the '/' character\r
-#\r
-FILES_lib_objs = \\r
- $(EOLIST)\r
-\r
-#\r
-# implement targets and dependancies (leave this section alone)\r
-#\r
-\r
-libs :: $(OBJDIR) $(TARGET_lib)\r
-\r
-nlms :: libs $(TARGET_nlm)\r
-\r
-#\r
-# Updated this target to create necessary directories and copy files to the \r
-# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)\r
-#\r
-install :: nlms FORCE\r
-\r
-#\r
-# Any specialized rules here\r
-#\r
-\r
-#\r
-# Include the 'tail' makefile that has targets that depend on variables defined\r
-# in this makefile\r
-#\r
-\r
-include $(AP_WORK)\build\NWGNUtail.inc\r
-\r
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP_WORK)/include \
+ $(NWOS) \
+ $(AP_WORK)/modules/arch/netware \
+ $(AP_WORK)/modules/http \
+ $(APR)/include \
+ $(APRUTIL)/include \
+ $(APR) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = userdir
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache $(VERSION_STR) User Dir Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = UserDir Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def
+# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA =
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/userdir.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_userdir.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ libcpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ aprlib \
+ libc \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @$(APR)/aprlib.imp \
+ @$(NWOS)/httpd.imp \
+ @libc.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ userdir_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+