--- /dev/null
+# $IdPath$
+# Transforms queue manpage into various output formats.
+
+all: queue.html queue.ps
+
+queue.html: queue.3
+ groff -mmandoc -Thtml queue.3 >queue.html
+
+queue.ps: queue.3
+ groff -mmandoc -Tps queue.3 >queue.ps
--- /dev/null
+.\" Copyright (c) 1993
+.\" The Regents of the University of California. All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\" must display the following acknowledgement:
+.\" This product includes software developed by the University of
+.\" California, Berkeley and its contributors.
+.\" 4. Neither the name of the University nor the names of its contributors
+.\" may be used to endorse or promote products derived from this software
+.\" without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\" @(#)queue.3 8.2 (Berkeley) 1/24/94
+.\" $FreeBSD: src/share/man/man3/queue.3,v 1.15.2.5 2001/08/21 06:58:44 sobomax Exp $
+.\"
+.Dd January 24, 1994
+.Dt QUEUE 3
+.Os
+.Sh NAME
+.Nm SLIST_EMPTY ,
+.Nm SLIST_ENTRY ,
+.Nm SLIST_FIRST ,
+.Nm SLIST_FOREACH ,
+.Nm SLIST_HEAD ,
+.Nm SLIST_INIT ,
+.Nm SLIST_INSERT_AFTER ,
+.Nm SLIST_INSERT_HEAD ,
+.Nm SLIST_NEXT ,
+.Nm SLIST_REMOVE_HEAD ,
+.Nm SLIST_REMOVE ,
+.Nm STAILQ_EMPTY ,
+.Nm STAILQ_ENTRY ,
+.Nm STAILQ_FIRST ,
+.Nm STAILQ_FOREACH ,
+.Nm STAILQ_HEAD ,
+.Nm STAILQ_INIT ,
+.Nm STAILQ_INSERT_AFTER ,
+.Nm STAILQ_INSERT_HEAD ,
+.Nm STAILQ_INSERT_TAIL ,
+.Nm STAILQ_LAST ,
+.Nm STAILQ_NEXT ,
+.Nm STAILQ_REMOVE_HEAD ,
+.Nm STAILQ_REMOVE ,
+.Nm LIST_EMPTY ,
+.Nm LIST_ENTRY ,
+.Nm LIST_FIRST ,
+.Nm LIST_FOREACH ,
+.Nm LIST_HEAD ,
+.Nm LIST_INIT ,
+.Nm LIST_INSERT_AFTER ,
+.Nm LIST_INSERT_BEFORE ,
+.Nm LIST_INSERT_HEAD ,
+.Nm LIST_NEXT ,
+.Nm LIST_REMOVE ,
+.Nm TAILQ_EMPTY ,
+.Nm TAILQ_ENTRY ,
+.Nm TAILQ_FIRST ,
+.Nm TAILQ_FOREACH ,
+.Nm TAILQ_FOREACH_REVERSE ,
+.Nm TAILQ_HEAD ,
+.Nm TAILQ_INIT ,
+.Nm TAILQ_INSERT_AFTER ,
+.Nm TAILQ_INSERT_BEFORE ,
+.Nm TAILQ_INSERT_HEAD ,
+.Nm TAILQ_INSERT_TAIL ,
+.Nm TAILQ_LAST ,
+.Nm TAILQ_NEXT ,
+.Nm TAILQ_PREV ,
+.Nm TAILQ_REMOVE ,
+.Nm CIRCLEQ_EMPTY ,
+.Nm CIRCLEQ_ENTRY ,
+.Nm CIRCLEQ_FIRST ,
+.Nm CIRCLEQ_FOREACH ,
+.Nm CIRCLEQ_FOREACH_REVERSE ,
+.Nm CIRCLEQ_HEAD ,
+.Nm CIRCLEQ_INIT ,
+.Nm CIRCLEQ_INSERT_AFTER ,
+.Nm CIRCLEQ_INSERT_BEFORE ,
+.Nm CIRCLEQ_INSERT_HEAD ,
+.Nm CIRCLEQ_INSERT_TAIL ,
+.Nm CIRCLE_LAST ,
+.Nm CIRCLE_NEXT ,
+.Nm CIRCLE_PREV ,
+.Nm CIRCLEQ_REMOVE
+.Nd implementations of singly-linked lists, singly-linked tail queues,
+lists, tail queues, and circular queues
+.Sh SYNOPSIS
+.Fd #include <sys/queue.h>
+.\"
+.Fn SLIST_EMPTY "SLIST_HEAD *head"
+.Fn SLIST_ENTRY "TYPE"
+.Fn SLIST_FIRST "SLIST_HEAD *head"
+.Fn SLIST_FOREACH "TYPE *var" "SLIST_HEAD *head" "SLIST_ENTRY NAME"
+.Fn SLIST_HEAD "HEADNAME" "TYPE"
+.Fn SLIST_INIT "SLIST_HEAD *head"
+.Fn SLIST_INSERT_AFTER "TYPE *listelm" "TYPE *elm" "SLIST_ENTRY NAME"
+.Fn SLIST_INSERT_HEAD "SLIST_HEAD *head" "TYPE *elm" "SLIST_ENTRY NAME"
+.Fn SLIST_NEXT "TYPE *elm" "SLIST_ENTRY NAME"
+.Fn SLIST_REMOVE_HEAD "SLIST_HEAD *head" "SLIST_ENTRY NAME"
+.Fn SLIST_REMOVE "SLIST_HEAD *head" "TYPE *elm" "TYPE" "SLIST_ENTRY NAME"
+.\"
+.Fn STAILQ_EMPTY "STAILQ_HEAD *head"
+.Fn STAILQ_ENTRY "TYPE"
+.Fn STAILQ_FIRST "STAILQ_HEAD *head"
+.Fn STAILQ_FOREACH "TYPE *var" "STAILQ_HEAD *head" "STAILQ_ENTRY NAME"
+.Fn STAILQ_HEAD "HEADNAME" "TYPE"
+.Fn STAILQ_INIT "STAILQ_HEAD *head"
+.Fn STAILQ_INSERT_AFTER "STAILQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_INSERT_HEAD "STAILQ_HEAD *head" "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_INSERT_TAIL "STAILQ_HEAD *head" "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_LAST "STAILQ_HEAD *head" "TYPE" "STAILQ_ENTRY NAME"
+.Fn STAILQ_NEXT "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_REMOVE_HEAD "STAILQ_HEAD *head" "STAILQ_ENTRY NAME"
+.Fn STAILQ_REMOVE "STAILQ_HEAD *head" "TYPE *elm" "TYPE" "STAILQ_ENTRY NAME"
+.\"
+.Fn LIST_EMPTY "LIST_HEAD *head"
+.Fn LIST_ENTRY "TYPE"
+.Fn LIST_FIRST "LIST_HEAD *head"
+.Fn LIST_FOREACH "TYPE *var" "LIST_HEAD *head" "LIST_ENTRY NAME"
+.Fn LIST_HEAD "HEADNAME" "TYPE"
+.Fn LIST_INIT "LIST_HEAD *head"
+.Fn LIST_INSERT_AFTER "TYPE *listelm" "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_INSERT_BEFORE "TYPE *listelm" "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_INSERT_HEAD "LIST_HEAD *head" "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_NEXT "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_REMOVE "TYPE *elm" "LIST_ENTRY NAME"
+.\"
+.Fn TAILQ_EMPTY "TAILQ_HEAD *head"
+.Fn TAILQ_ENTRY "TYPE"
+.Fn TAILQ_FIRST "TAILQ_HEAD *head"
+.Fn TAILQ_FOREACH "TYPE *var" "TAILQ_HEAD *head" "TAILQ_ENTRY NAME"
+.Fn TAILQ_FOREACH_REVERSE "TYPE *var" "TAILQ_HEAD *head" "HEADNAME" "TAILQ_ENTRY NAME"
+.Fn TAILQ_HEAD "HEADNAME" "TYPE"
+.Fn TAILQ_INIT "TAILQ_HEAD *head"
+.Fn TAILQ_INSERT_AFTER "TAILQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_INSERT_BEFORE "TYPE *listelm" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_INSERT_HEAD "TAILQ_HEAD *head" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_INSERT_TAIL "TAILQ_HEAD *head" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_LAST "TAILQ_HEAD *head" "HEADNAME"
+.Fn TAILQ_NEXT "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_PREV "TYPE *elm" "HEADNAME" "TAILQ_ENTRY NAME"
+.Fn TAILQ_REMOVE "TAILQ_HEAD *head" "TYPE *elm" "TAILQ_ENTRY NAME"
+.\"
+.Fn CIRCLEQ_EMPTY "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_ENTRY "TYPE"
+.Fn CIRCLEQ_FIRST "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_FOREACH "TYPE *var" "CIRCLEQ_HEAD *head" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_FOREACH_REVERSE "TYPE *var" "CIRCLEQ_HEAD *head" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_HEAD "HEADNAME" "TYPE"
+.Fn CIRCLEQ_INIT "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_INSERT_AFTER "CIRCLEQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_INSERT_BEFORE "CIRCLEQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_INSERT_HEAD "CIRCLEQ_HEAD *head" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_INSERT_TAIL "CIRCLEQ_HEAD *head" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_LAST "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_NEXT "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLE_PREV "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_REMOVE "CIRCLEQ_HEAD *head" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Sh DESCRIPTION
+These macros define and operate on five types of data structures:
+singly-linked lists, singly-linked tail queues, lists, tail queues,
+and circular queues.
+All five structures support the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Insertion of a new entry at the head of the list.
+.It
+Insertion of a new entry after any element in the list.
+.It
+O(1) removal of an entry from the head of the list.
+.It
+O(n) removal of any entry in the list.
+.It
+Forward traversal through the list.
+.El
+.Pp
+Singly-linked lists are the simplest of the five data structures
+and support only the above functionality.
+Singly-linked lists are ideal for applications with large datasets
+and few or no removals,
+or for implementing a LIFO queue.
+.Pp
+Singly-linked tail queues add the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Entries can be added at the end of a list.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+All list insertions must specify the head of the list.
+.It
+Each head entry requires two pointers rather than one.
+.It
+Code size is about 15% greater and operations run about 20% slower
+than singly-linked lists.
+.El
+.Pp
+Singly-linked tailqs are ideal for applications with large datasets and
+few or no removals,
+or for implementing a FIFO queue.
+.Pp
+All doubly linked types of data structures (lists, tail queues, and circle
+queues) additionally allow:
+.Bl -enum -compact -offset indent
+.It
+Insertion of a new entry before any element in the list.
+.It
+O(1) removal of any entry in the list.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+Each elements requires two pointers rather than one.
+.It
+Code size and execution time of operations (except for removal) is about
+twice that of the singly-linked data-structures.
+.El
+.Pp
+Linked lists are the simplest of the doubly linked data structures and support
+only the above functionality over singly-linked lists.
+.Pp
+Tail queues add the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Entries can be added at the end of a list.
+.It
+They may be traversed backwards, from tail to head.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+All list insertions and removals must specify the head of the list.
+.It
+Each head entry requires two pointers rather than one.
+.It
+Code size is about 15% greater and operations run about 20% slower
+than singly-linked lists.
+.El
+.Pp
+Circular queues add the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Entries can be added at the end of a list.
+.It
+They may be traversed backwards, from tail to head.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+All list insertions and removals must specify the head of the list.
+.It
+Each head entry requires two pointers rather than one.
+.It
+The termination condition for traversal is more complex.
+.It
+Code size is about 40% greater and operations run about 45% slower
+than lists.
+.El
+.Pp
+In the macro definitions,
+.Fa TYPE
+is the name of a user defined structure,
+that must contain a field of type
+.Li SLIST_ENTRY ,
+.Li STAILQ_ENTRY ,
+.Li LIST_ENTRY ,
+.Li TAILQ_ENTRY ,
+or
+.Li CIRCLEQ_ENTRY ,
+named
+.Fa NAME .
+The argument
+.Fa HEADNAME
+is the name of a user defined structure that must be declared
+using the macros
+.Li SLIST_HEAD ,
+.Li STAILQ_HEAD ,
+.Li LIST_HEAD ,
+.Li TAILQ_HEAD ,
+or
+.Li CIRCLEQ_HEAD .
+See the examples below for further explanation of how these
+macros are used.
+.Sh SINGLY-LINKED LISTS
+A singly-linked list is headed by a structure defined by the
+.Nm SLIST_HEAD
+macro.
+This structure contains a single pointer to the first element
+on the list.
+The elements are singly linked for minimum space and pointer manipulation
+overhead at the expense of O(n) removal for arbitrary elements.
+New elements can be added to the list after an existing element or
+at the head of the list.
+An
+.Fa SLIST_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+SLIST_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Fa HEADNAME
+is the name of the structure to be defined, and
+.Fa TYPE
+is the type of the elements to be linked into the list.
+A pointer to the head of the list can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm SLIST_EMPTY
+evaluates to true if there are no elements in the list.
+.Pp
+The macro
+.Nm SLIST_ENTRY
+declares a structure that connects the elements in
+the list.
+.Pp
+The macro
+.Nm SLIST_FIRST
+returns the first element in the list or NULL if the list is empty.
+.Pp
+The macro
+.Nm SLIST_FOREACH
+traverses the list referenced by
+.Fa head
+in the forward direction, assigning each element in
+turn to
+.Fa var .
+.Pp
+The macro
+.Nm SLIST_INIT
+initializes the list referenced by
+.Fa head .
+.Pp
+The macro
+.Nm SLIST_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the list.
+.Pp
+The macro
+.Nm SLIST_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm SLIST_NEXT
+returns the next element in the list.
+.Pp
+The macro
+.Nm SLIST_REMOVE_HEAD
+removes the element
+.Fa elm
+from the head of the list.
+For optimum efficiency,
+elements being removed from the head of the list should explicitly use
+this macro instead of the generic
+.Fa SLIST_REMOVE
+macro.
+.Pp
+The macro
+.Nm SLIST_REMOVE
+removes the element
+.Fa elm
+from the list.
+.Sh SINGLY-LINKED LIST EXAMPLE
+.Bd -literal
+SLIST_HEAD(slisthead, entry) head;
+struct slisthead *headp; /* Singly-linked List head. */
+struct entry {
+ ...
+ SLIST_ENTRY(entry) entries; /* Singly-linked List. */
+ ...
+} *n1, *n2, *n3, *np;
+
+SLIST_INIT(&head); /* Initialize the list. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+SLIST_INSERT_HEAD(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+SLIST_INSERT_AFTER(n1, n2, entries);
+
+SLIST_REMOVE(&head, n2, entry, entries);/* Deletion. */
+free(n2);
+
+n3 = SLIST_FIRST(&head);
+SLIST_REMOVE_HEAD(&head, entries); /* Deletion. */
+free(n3);
+
+ /* Forward traversal. */
+SLIST_FOREACH(np, &head, entries)
+ np-> ...
+
+while (!SLIST_EMPTY(&head)) { /* List Deletion. */
+ n1 = SLIST_FIRST(&head);
+ SLIST_REMOVE_HEAD(&head, entries);
+ free(n1);
+}
+.Ed
+.Sh SINGLY-LINKED TAIL QUEUES
+A singly-linked tail queue is headed by a structure defined by the
+.Nm STAILQ_HEAD
+macro.
+This structure contains a pair of pointers,
+one to the first element in the tail queue and the other to
+the last element in the tail queue.
+The elements are singly linked for minimum space and pointer
+manipulation overhead at the expense of O(n) removal for arbitrary
+elements.
+New elements can be added to the tail queue after an existing element,
+at the head of the tail queue, or at the end of the tail queue.
+A
+.Fa STAILQ_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+STAILQ_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Li HEADNAME
+is the name of the structure to be defined, and
+.Li TYPE
+is the type of the elements to be linked into the tail queue.
+A pointer to the head of the tail queue can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm STAILQ_EMPTY
+evaluates to true if there are no items on the tail queue.
+.Pp
+The macro
+.Nm STAILQ_ENTRY
+declares a structure that connects the elements in
+the tail queue.
+.Pp
+The macro
+.Nm STAILQ_FIRST
+returns the first item on the tail queue or NULL if the tail queue
+is empty.
+.Pp
+The macro
+.Nm STAILQ_FOREACH
+traverses the tail queue referenced by
+.Fa head
+in the forward direction, assigning each element
+in turn to
+.Fa var .
+.Pp
+The macro
+.Nm STAILQ_INIT
+initializes the tail queue referenced by
+.Fa head .
+.Pp
+The macro
+.Nm STAILQ_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the tail queue.
+.Pp
+The macro
+.Nm STAILQ_INSERT_TAIL
+inserts the new element
+.Fa elm
+at the end of the tail queue.
+.Pp
+The macro
+.Nm STAILQ_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm STAILQ_LAST
+returns the last item on the tail queue.
+If the tail queue is empty the return value is undefined.
+.Pp
+The macro
+.Nm STAILQ_NEXT
+returns the next item on the tail queue, or NULL this item is the last.
+.Pp
+The macro
+.Nm STAILQ_REMOVE_HEAD
+removes the element
+.Fa elm
+from the head of the tail queue.
+For optimum efficiency,
+elements being removed from the head of the tail queue should
+use this macro explicitly rather than the generic
+.Fa STAILQ_REMOVE
+macro.
+.Pp
+The macro
+.Nm STAILQ_REMOVE
+removes the element
+.Fa elm
+from the tail queue.
+.Sh SINGLY-LINKED TAIL QUEUE EXAMPLE
+.Bd -literal
+STAILQ_HEAD(stailhead, entry) head;
+struct stailhead *headp; /* Singly-linked tail queue head. */
+struct entry {
+ ...
+ STAILQ_ENTRY(entry) entries; /* Tail queue. */
+ ...
+} *n1, *n2, *n3, *np;
+
+STAILQ_INIT(&head); /* Initialize the queue. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+STAILQ_INSERT_HEAD(&head, n1, entries);
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the tail. */
+STAILQ_INSERT_TAIL(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+STAILQ_INSERT_AFTER(&head, n1, n2, entries);
+
+ /* Deletion. */
+STAILQ_REMOVE(&head, n2, entry, entries);
+free(n2);
+
+ /* Deletion from the head */
+n3 = STAILQ_FIRST(&head);
+STAILQ_REMOVE_HEAD(&head, entries);
+free(n3);
+
+ /* Forward traversal. */
+STAILQ_FOREACH(np, &head, entries)
+ np-> ...
+ /* TailQ Deletion. */
+while (!STAILQ_EMPTY(&head)) {
+ n1 = STAILQ_HEAD(&head);
+ STAILQ_REMOVE_HEAD(&head, entries);
+ free(n1);
+}
+ /* Faster TailQ Deletion. */
+n1 = STAILQ_FIRST(&head);
+while (n1 != NULL) {
+ n2 = STAILQ_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+STAILQ_INIT(&head);
+.Ed
+.Sh LISTS
+A list is headed by a structure defined by the
+.Nm LIST_HEAD
+macro.
+This structure contains a single pointer to the first element
+on the list.
+The elements are doubly linked so that an arbitrary element can be
+removed without traversing the list.
+New elements can be added to the list after an existing element,
+before an existing element, or at the head of the list.
+A
+.Fa LIST_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+LIST_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Fa HEADNAME
+is the name of the structure to be defined, and
+.Fa TYPE
+is the type of the elements to be linked into the list.
+A pointer to the head of the list can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm LIST_EMPTY
+evaluates to true if their are no elements in the list.
+.Pp
+The macro
+.Nm LIST_ENTRY
+declares a structure that connects the elements in
+the list.
+.Pp
+The macro
+.Nm LIST_FIRST
+returns the first element in the list or NULL if the list
+is empty.
+.Pp
+The macro
+.Nm LIST_FOREACH
+traverses the list referenced by
+.Fa head
+in the forward direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm LIST_INIT
+initializes the list referenced by
+.Fa head .
+.Pp
+The macro
+.Nm LIST_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the list.
+.Pp
+The macro
+.Nm LIST_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm LIST_INSERT_BEFORE
+inserts the new element
+.Fa elm
+before the element
+.Fa listelm .
+.Pp
+The macro
+.Nm LIST_NEXT
+returns the next element in the list, or NULL if this is the last.
+.Pp
+The macro
+.Nm LIST_REMOVE
+removes the element
+.Fa elm
+from the list.
+.Sh LIST EXAMPLE
+.Bd -literal
+LIST_HEAD(listhead, entry) head;
+struct listhead *headp; /* List head. */
+struct entry {
+ ...
+ LIST_ENTRY(entry) entries; /* List. */
+ ...
+} *n1, *n2, *n3, *np;
+
+LIST_INIT(&head); /* Initialize the list. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+LIST_INSERT_HEAD(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+LIST_INSERT_AFTER(n1, n2, entries);
+
+n3 = malloc(sizeof(struct entry)); /* Insert before. */
+LIST_INSERT_BEFORE(n2, n3, entries);
+
+LIST_REMOVE(n2, entries); /* Deletion. */
+free(n2);
+
+ /* Forward traversal. */
+LIST_FOREACH(np, &head, entries)
+ np-> ...
+
+while (!LIST_EMPTY(&head)) { /* List Deletion. */
+ n1 = LIST_FIRST(&head);
+ LIST_REMOVE(n1, entries);
+ free(n1);
+}
+
+n1 = LIST_FIRST(&head); /* Faster List Delete. */
+while (n1 != NULL) {
+ n2 = LIST_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+LIST_INIT(&head);
+.Ed
+.Sh TAIL QUEUES
+A tail queue is headed by a structure defined by the
+.Nm TAILQ_HEAD
+macro.
+This structure contains a pair of pointers,
+one to the first element in the tail queue and the other to
+the last element in the tail queue.
+The elements are doubly linked so that an arbitrary element can be
+removed without traversing the tail queue.
+New elements can be added to the tail queue after an existing element,
+before an existing element, at the head of the tail queue,
+or at the end of the tail queue.
+A
+.Fa TAILQ_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+TAILQ_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Li HEADNAME
+is the name of the structure to be defined, and
+.Li TYPE
+is the type of the elements to be linked into the tail queue.
+A pointer to the head of the tail queue can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm TAILQ_EMPTY
+evaluates to true if there are no items on the tail queue.
+.Pp
+The macro
+.Nm TAILQ_ENTRY
+declares a structure that connects the elements in
+the tail queue.
+.Pp
+The macro
+.Nm TAILQ_FIRST
+returns the first item on the tail queue or NULL if the tail queue
+is empty.
+.Pp
+The macro
+.Nm TAILQ_FOREACH
+traverses the tail queue referenced by
+.Fa head
+in the forward direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm TAILQ_FOREACH_REVERSE
+traverses the tail queue referenced by
+.Fa head
+in the reverse direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm TAILQ_INIT
+initializes the tail queue referenced by
+.Fa head .
+.Pp
+The macro
+.Nm TAILQ_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the tail queue.
+.Pp
+The macro
+.Nm TAILQ_INSERT_TAIL
+inserts the new element
+.Fa elm
+at the end of the tail queue.
+.Pp
+The macro
+.Nm TAILQ_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm TAILQ_INSERT_BEFORE
+inserts the new element
+.Fa elm
+before the element
+.Fa listelm .
+.Pp
+The macro
+.Nm TAILQ_LAST
+returns the last item on the tail queue.
+If the tail queue is empty the return value is undefined.
+.Pp
+The macro
+.Nm TAILQ_NEXT
+returns the next item on the tail queue, or NULL if this item is the last.
+.Pp
+The macro
+.Nm TAILQ_PREV
+returns the previous item on the tail queue, or NULL if this item
+is the first.
+.Pp
+The macro
+.Nm TAILQ_REMOVE
+removes the element
+.Fa elm
+from the tail queue.
+.Sh TAIL QUEUE EXAMPLE
+.Bd -literal
+TAILQ_HEAD(tailhead, entry) head;
+struct tailhead *headp; /* Tail queue head. */
+struct entry {
+ ...
+ TAILQ_ENTRY(entry) entries; /* Tail queue. */
+ ...
+} *n1, *n2, *n3, *np;
+
+TAILQ_INIT(&head); /* Initialize the queue. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+TAILQ_INSERT_HEAD(&head, n1, entries);
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the tail. */
+TAILQ_INSERT_TAIL(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+TAILQ_INSERT_AFTER(&head, n1, n2, entries);
+
+n3 = malloc(sizeof(struct entry)); /* Insert before. */
+TAILQ_INSERT_BEFORE(n2, n3, entries);
+
+TAILQ_REMOVE(&head, n2, entries); /* Deletion. */
+free(n2);
+ /* Forward traversal. */
+TAILQ_FOREACH(np, &head, entries)
+ np-> ...
+ /* Reverse traversal. */
+TAILQ_FOREACH_REVERSE(np, &head, tailhead, entries)
+ np-> ...
+ /* TailQ Deletion. */
+while (!TAILQ_EMPTY(head)) {
+ n1 = TAILQ_FIRST(&head);
+ TAILQ_REMOVE(&head, n1, entries);
+ free(n1);
+}
+ /* Faster TailQ Deletion. */
+
+n1 = TAILQ_FIRST(&head);
+while (n1 != NULL) {
+ n2 = TAILQ_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+TAILQ_INIT(&head);
+.Ed
+.Sh CIRCULAR QUEUES
+A circular queue is headed by a structure defined by the
+.Nm CIRCLEQ_HEAD
+macro.
+This structure contains a pair of pointers,
+one to the first element in the circular queue and the other to the
+last element in the circular queue.
+The elements are doubly linked so that an arbitrary element can be
+removed without traversing the queue.
+New elements can be added to the queue after an existing element,
+before an existing element, at the head of the queue, or at the end
+of the queue.
+A
+.Fa CIRCLEQ_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+CIRCLEQ_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Li HEADNAME
+is the name of the structure to be defined, and
+.Li TYPE
+is the type of the elements to be linked into the circular queue.
+A pointer to the head of the circular queue can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm CIRCLEQ_EMPTY
+evaluates to true if there are no items on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_ENTRY
+declares a structure that connects the elements in
+the circular queue.
+.Pp
+The macro
+.Nm CIRCLEQ_FIRST
+returns the first item on the circle queue.
+.Pp
+The macro
+.Nm CICRLEQ_FOREACH
+traverses the circle queue referenced by
+.Fa head
+in the forward direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm CICRLEQ_FOREACH_REVERSE
+traverses the circle queue referenced by
+.Fa head
+in the reverse direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm CIRCLEQ_INIT
+initializes the circular queue referenced by
+.Fa head .
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the circular queue.
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_TAIL
+inserts the new element
+.Fa elm
+at the end of the circular queue.
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_BEFORE
+inserts the new element
+.Fa elm
+before the element
+.Fa listelm .
+.Pp
+The macro
+.Nm CIRCLEQ_LAST
+returns the last item on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_NEXT
+returns the next item on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_PREV
+returns the previous item on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_REMOVE
+removes the element
+.Fa elm
+from the circular queue.
+.Sh CIRCULAR QUEUE EXAMPLE
+.Bd -literal
+CIRCLEQ_HEAD(circleq, entry) head;
+struct circleq *headp; /* Circular queue head. */
+struct entry {
+ ...
+ CIRCLEQ_ENTRY(entry) entries; /* Circular queue. */
+ ...
+} *n1, *n2, *np;
+
+CIRCLEQ_INIT(&head); /* Initialize the circular queue. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+CIRCLEQ_INSERT_HEAD(&head, n1, entries);
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the tail. */
+CIRCLEQ_INSERT_TAIL(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+CIRCLEQ_INSERT_AFTER(&head, n1, n2, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert before. */
+CIRCLEQ_INSERT_BEFORE(&head, n1, n2, entries);
+
+CIRCLEQ_REMOVE(&head, n1, entries); /* Deletion. */
+free(n1);
+ /* Forward traversal. */
+CIRCLEQ_FOREACH(np, &head, entries)
+ np-> ...
+ /* Reverse traversal. */
+CIRCLEQ_FOREACH_REVERSE(np, &head, entries)
+ np-> ...
+ /* CircleQ Deletion. */
+while (CIRCLEQ_FIRST(&head) != (void *)&head) {
+ n1 = CIRCLEQ_HEAD(&head);
+ CIRCLEQ_REMOVE(&head, n1, entries);
+ free(n1);
+}
+ /* Faster CircleQ Deletion. */
+n1 = CIRCLEQ_FIRST(&head);
+while (n1 != (void *)&head) {
+ n2 = CIRCLEQ_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+CIRCLEQ_INIT(&head);
+.Ed
+.Sh HISTORY
+The
+.Nm queue
+functions first appeared in
+.Bx 4.4 .
--- /dev/null
+# $IdPath$
+# Transforms queue manpage into various output formats.
+
+all: queue.html queue.ps
+
+queue.html: queue.3
+ groff -mmandoc -Thtml queue.3 >queue.html
+
+queue.ps: queue.3
+ groff -mmandoc -Tps queue.3 >queue.ps
--- /dev/null
+.\" Copyright (c) 1993
+.\" The Regents of the University of California. All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\" must display the following acknowledgement:
+.\" This product includes software developed by the University of
+.\" California, Berkeley and its contributors.
+.\" 4. Neither the name of the University nor the names of its contributors
+.\" may be used to endorse or promote products derived from this software
+.\" without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\" @(#)queue.3 8.2 (Berkeley) 1/24/94
+.\" $FreeBSD: src/share/man/man3/queue.3,v 1.15.2.5 2001/08/21 06:58:44 sobomax Exp $
+.\"
+.Dd January 24, 1994
+.Dt QUEUE 3
+.Os
+.Sh NAME
+.Nm SLIST_EMPTY ,
+.Nm SLIST_ENTRY ,
+.Nm SLIST_FIRST ,
+.Nm SLIST_FOREACH ,
+.Nm SLIST_HEAD ,
+.Nm SLIST_INIT ,
+.Nm SLIST_INSERT_AFTER ,
+.Nm SLIST_INSERT_HEAD ,
+.Nm SLIST_NEXT ,
+.Nm SLIST_REMOVE_HEAD ,
+.Nm SLIST_REMOVE ,
+.Nm STAILQ_EMPTY ,
+.Nm STAILQ_ENTRY ,
+.Nm STAILQ_FIRST ,
+.Nm STAILQ_FOREACH ,
+.Nm STAILQ_HEAD ,
+.Nm STAILQ_INIT ,
+.Nm STAILQ_INSERT_AFTER ,
+.Nm STAILQ_INSERT_HEAD ,
+.Nm STAILQ_INSERT_TAIL ,
+.Nm STAILQ_LAST ,
+.Nm STAILQ_NEXT ,
+.Nm STAILQ_REMOVE_HEAD ,
+.Nm STAILQ_REMOVE ,
+.Nm LIST_EMPTY ,
+.Nm LIST_ENTRY ,
+.Nm LIST_FIRST ,
+.Nm LIST_FOREACH ,
+.Nm LIST_HEAD ,
+.Nm LIST_INIT ,
+.Nm LIST_INSERT_AFTER ,
+.Nm LIST_INSERT_BEFORE ,
+.Nm LIST_INSERT_HEAD ,
+.Nm LIST_NEXT ,
+.Nm LIST_REMOVE ,
+.Nm TAILQ_EMPTY ,
+.Nm TAILQ_ENTRY ,
+.Nm TAILQ_FIRST ,
+.Nm TAILQ_FOREACH ,
+.Nm TAILQ_FOREACH_REVERSE ,
+.Nm TAILQ_HEAD ,
+.Nm TAILQ_INIT ,
+.Nm TAILQ_INSERT_AFTER ,
+.Nm TAILQ_INSERT_BEFORE ,
+.Nm TAILQ_INSERT_HEAD ,
+.Nm TAILQ_INSERT_TAIL ,
+.Nm TAILQ_LAST ,
+.Nm TAILQ_NEXT ,
+.Nm TAILQ_PREV ,
+.Nm TAILQ_REMOVE ,
+.Nm CIRCLEQ_EMPTY ,
+.Nm CIRCLEQ_ENTRY ,
+.Nm CIRCLEQ_FIRST ,
+.Nm CIRCLEQ_FOREACH ,
+.Nm CIRCLEQ_FOREACH_REVERSE ,
+.Nm CIRCLEQ_HEAD ,
+.Nm CIRCLEQ_INIT ,
+.Nm CIRCLEQ_INSERT_AFTER ,
+.Nm CIRCLEQ_INSERT_BEFORE ,
+.Nm CIRCLEQ_INSERT_HEAD ,
+.Nm CIRCLEQ_INSERT_TAIL ,
+.Nm CIRCLE_LAST ,
+.Nm CIRCLE_NEXT ,
+.Nm CIRCLE_PREV ,
+.Nm CIRCLEQ_REMOVE
+.Nd implementations of singly-linked lists, singly-linked tail queues,
+lists, tail queues, and circular queues
+.Sh SYNOPSIS
+.Fd #include <sys/queue.h>
+.\"
+.Fn SLIST_EMPTY "SLIST_HEAD *head"
+.Fn SLIST_ENTRY "TYPE"
+.Fn SLIST_FIRST "SLIST_HEAD *head"
+.Fn SLIST_FOREACH "TYPE *var" "SLIST_HEAD *head" "SLIST_ENTRY NAME"
+.Fn SLIST_HEAD "HEADNAME" "TYPE"
+.Fn SLIST_INIT "SLIST_HEAD *head"
+.Fn SLIST_INSERT_AFTER "TYPE *listelm" "TYPE *elm" "SLIST_ENTRY NAME"
+.Fn SLIST_INSERT_HEAD "SLIST_HEAD *head" "TYPE *elm" "SLIST_ENTRY NAME"
+.Fn SLIST_NEXT "TYPE *elm" "SLIST_ENTRY NAME"
+.Fn SLIST_REMOVE_HEAD "SLIST_HEAD *head" "SLIST_ENTRY NAME"
+.Fn SLIST_REMOVE "SLIST_HEAD *head" "TYPE *elm" "TYPE" "SLIST_ENTRY NAME"
+.\"
+.Fn STAILQ_EMPTY "STAILQ_HEAD *head"
+.Fn STAILQ_ENTRY "TYPE"
+.Fn STAILQ_FIRST "STAILQ_HEAD *head"
+.Fn STAILQ_FOREACH "TYPE *var" "STAILQ_HEAD *head" "STAILQ_ENTRY NAME"
+.Fn STAILQ_HEAD "HEADNAME" "TYPE"
+.Fn STAILQ_INIT "STAILQ_HEAD *head"
+.Fn STAILQ_INSERT_AFTER "STAILQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_INSERT_HEAD "STAILQ_HEAD *head" "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_INSERT_TAIL "STAILQ_HEAD *head" "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_LAST "STAILQ_HEAD *head" "TYPE" "STAILQ_ENTRY NAME"
+.Fn STAILQ_NEXT "TYPE *elm" "STAILQ_ENTRY NAME"
+.Fn STAILQ_REMOVE_HEAD "STAILQ_HEAD *head" "STAILQ_ENTRY NAME"
+.Fn STAILQ_REMOVE "STAILQ_HEAD *head" "TYPE *elm" "TYPE" "STAILQ_ENTRY NAME"
+.\"
+.Fn LIST_EMPTY "LIST_HEAD *head"
+.Fn LIST_ENTRY "TYPE"
+.Fn LIST_FIRST "LIST_HEAD *head"
+.Fn LIST_FOREACH "TYPE *var" "LIST_HEAD *head" "LIST_ENTRY NAME"
+.Fn LIST_HEAD "HEADNAME" "TYPE"
+.Fn LIST_INIT "LIST_HEAD *head"
+.Fn LIST_INSERT_AFTER "TYPE *listelm" "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_INSERT_BEFORE "TYPE *listelm" "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_INSERT_HEAD "LIST_HEAD *head" "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_NEXT "TYPE *elm" "LIST_ENTRY NAME"
+.Fn LIST_REMOVE "TYPE *elm" "LIST_ENTRY NAME"
+.\"
+.Fn TAILQ_EMPTY "TAILQ_HEAD *head"
+.Fn TAILQ_ENTRY "TYPE"
+.Fn TAILQ_FIRST "TAILQ_HEAD *head"
+.Fn TAILQ_FOREACH "TYPE *var" "TAILQ_HEAD *head" "TAILQ_ENTRY NAME"
+.Fn TAILQ_FOREACH_REVERSE "TYPE *var" "TAILQ_HEAD *head" "HEADNAME" "TAILQ_ENTRY NAME"
+.Fn TAILQ_HEAD "HEADNAME" "TYPE"
+.Fn TAILQ_INIT "TAILQ_HEAD *head"
+.Fn TAILQ_INSERT_AFTER "TAILQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_INSERT_BEFORE "TYPE *listelm" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_INSERT_HEAD "TAILQ_HEAD *head" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_INSERT_TAIL "TAILQ_HEAD *head" "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_LAST "TAILQ_HEAD *head" "HEADNAME"
+.Fn TAILQ_NEXT "TYPE *elm" "TAILQ_ENTRY NAME"
+.Fn TAILQ_PREV "TYPE *elm" "HEADNAME" "TAILQ_ENTRY NAME"
+.Fn TAILQ_REMOVE "TAILQ_HEAD *head" "TYPE *elm" "TAILQ_ENTRY NAME"
+.\"
+.Fn CIRCLEQ_EMPTY "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_ENTRY "TYPE"
+.Fn CIRCLEQ_FIRST "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_FOREACH "TYPE *var" "CIRCLEQ_HEAD *head" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_FOREACH_REVERSE "TYPE *var" "CIRCLEQ_HEAD *head" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_HEAD "HEADNAME" "TYPE"
+.Fn CIRCLEQ_INIT "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_INSERT_AFTER "CIRCLEQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_INSERT_BEFORE "CIRCLEQ_HEAD *head" "TYPE *listelm" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_INSERT_HEAD "CIRCLEQ_HEAD *head" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_INSERT_TAIL "CIRCLEQ_HEAD *head" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_LAST "CIRCLEQ_HEAD *head"
+.Fn CIRCLEQ_NEXT "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLE_PREV "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Fn CIRCLEQ_REMOVE "CIRCLEQ_HEAD *head" "TYPE *elm" "CIRCLEQ_ENTRY NAME"
+.Sh DESCRIPTION
+These macros define and operate on five types of data structures:
+singly-linked lists, singly-linked tail queues, lists, tail queues,
+and circular queues.
+All five structures support the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Insertion of a new entry at the head of the list.
+.It
+Insertion of a new entry after any element in the list.
+.It
+O(1) removal of an entry from the head of the list.
+.It
+O(n) removal of any entry in the list.
+.It
+Forward traversal through the list.
+.El
+.Pp
+Singly-linked lists are the simplest of the five data structures
+and support only the above functionality.
+Singly-linked lists are ideal for applications with large datasets
+and few or no removals,
+or for implementing a LIFO queue.
+.Pp
+Singly-linked tail queues add the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Entries can be added at the end of a list.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+All list insertions must specify the head of the list.
+.It
+Each head entry requires two pointers rather than one.
+.It
+Code size is about 15% greater and operations run about 20% slower
+than singly-linked lists.
+.El
+.Pp
+Singly-linked tailqs are ideal for applications with large datasets and
+few or no removals,
+or for implementing a FIFO queue.
+.Pp
+All doubly linked types of data structures (lists, tail queues, and circle
+queues) additionally allow:
+.Bl -enum -compact -offset indent
+.It
+Insertion of a new entry before any element in the list.
+.It
+O(1) removal of any entry in the list.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+Each elements requires two pointers rather than one.
+.It
+Code size and execution time of operations (except for removal) is about
+twice that of the singly-linked data-structures.
+.El
+.Pp
+Linked lists are the simplest of the doubly linked data structures and support
+only the above functionality over singly-linked lists.
+.Pp
+Tail queues add the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Entries can be added at the end of a list.
+.It
+They may be traversed backwards, from tail to head.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+All list insertions and removals must specify the head of the list.
+.It
+Each head entry requires two pointers rather than one.
+.It
+Code size is about 15% greater and operations run about 20% slower
+than singly-linked lists.
+.El
+.Pp
+Circular queues add the following functionality:
+.Bl -enum -compact -offset indent
+.It
+Entries can be added at the end of a list.
+.It
+They may be traversed backwards, from tail to head.
+.El
+However:
+.Bl -enum -compact -offset indent
+.It
+All list insertions and removals must specify the head of the list.
+.It
+Each head entry requires two pointers rather than one.
+.It
+The termination condition for traversal is more complex.
+.It
+Code size is about 40% greater and operations run about 45% slower
+than lists.
+.El
+.Pp
+In the macro definitions,
+.Fa TYPE
+is the name of a user defined structure,
+that must contain a field of type
+.Li SLIST_ENTRY ,
+.Li STAILQ_ENTRY ,
+.Li LIST_ENTRY ,
+.Li TAILQ_ENTRY ,
+or
+.Li CIRCLEQ_ENTRY ,
+named
+.Fa NAME .
+The argument
+.Fa HEADNAME
+is the name of a user defined structure that must be declared
+using the macros
+.Li SLIST_HEAD ,
+.Li STAILQ_HEAD ,
+.Li LIST_HEAD ,
+.Li TAILQ_HEAD ,
+or
+.Li CIRCLEQ_HEAD .
+See the examples below for further explanation of how these
+macros are used.
+.Sh SINGLY-LINKED LISTS
+A singly-linked list is headed by a structure defined by the
+.Nm SLIST_HEAD
+macro.
+This structure contains a single pointer to the first element
+on the list.
+The elements are singly linked for minimum space and pointer manipulation
+overhead at the expense of O(n) removal for arbitrary elements.
+New elements can be added to the list after an existing element or
+at the head of the list.
+An
+.Fa SLIST_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+SLIST_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Fa HEADNAME
+is the name of the structure to be defined, and
+.Fa TYPE
+is the type of the elements to be linked into the list.
+A pointer to the head of the list can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm SLIST_EMPTY
+evaluates to true if there are no elements in the list.
+.Pp
+The macro
+.Nm SLIST_ENTRY
+declares a structure that connects the elements in
+the list.
+.Pp
+The macro
+.Nm SLIST_FIRST
+returns the first element in the list or NULL if the list is empty.
+.Pp
+The macro
+.Nm SLIST_FOREACH
+traverses the list referenced by
+.Fa head
+in the forward direction, assigning each element in
+turn to
+.Fa var .
+.Pp
+The macro
+.Nm SLIST_INIT
+initializes the list referenced by
+.Fa head .
+.Pp
+The macro
+.Nm SLIST_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the list.
+.Pp
+The macro
+.Nm SLIST_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm SLIST_NEXT
+returns the next element in the list.
+.Pp
+The macro
+.Nm SLIST_REMOVE_HEAD
+removes the element
+.Fa elm
+from the head of the list.
+For optimum efficiency,
+elements being removed from the head of the list should explicitly use
+this macro instead of the generic
+.Fa SLIST_REMOVE
+macro.
+.Pp
+The macro
+.Nm SLIST_REMOVE
+removes the element
+.Fa elm
+from the list.
+.Sh SINGLY-LINKED LIST EXAMPLE
+.Bd -literal
+SLIST_HEAD(slisthead, entry) head;
+struct slisthead *headp; /* Singly-linked List head. */
+struct entry {
+ ...
+ SLIST_ENTRY(entry) entries; /* Singly-linked List. */
+ ...
+} *n1, *n2, *n3, *np;
+
+SLIST_INIT(&head); /* Initialize the list. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+SLIST_INSERT_HEAD(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+SLIST_INSERT_AFTER(n1, n2, entries);
+
+SLIST_REMOVE(&head, n2, entry, entries);/* Deletion. */
+free(n2);
+
+n3 = SLIST_FIRST(&head);
+SLIST_REMOVE_HEAD(&head, entries); /* Deletion. */
+free(n3);
+
+ /* Forward traversal. */
+SLIST_FOREACH(np, &head, entries)
+ np-> ...
+
+while (!SLIST_EMPTY(&head)) { /* List Deletion. */
+ n1 = SLIST_FIRST(&head);
+ SLIST_REMOVE_HEAD(&head, entries);
+ free(n1);
+}
+.Ed
+.Sh SINGLY-LINKED TAIL QUEUES
+A singly-linked tail queue is headed by a structure defined by the
+.Nm STAILQ_HEAD
+macro.
+This structure contains a pair of pointers,
+one to the first element in the tail queue and the other to
+the last element in the tail queue.
+The elements are singly linked for minimum space and pointer
+manipulation overhead at the expense of O(n) removal for arbitrary
+elements.
+New elements can be added to the tail queue after an existing element,
+at the head of the tail queue, or at the end of the tail queue.
+A
+.Fa STAILQ_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+STAILQ_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Li HEADNAME
+is the name of the structure to be defined, and
+.Li TYPE
+is the type of the elements to be linked into the tail queue.
+A pointer to the head of the tail queue can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm STAILQ_EMPTY
+evaluates to true if there are no items on the tail queue.
+.Pp
+The macro
+.Nm STAILQ_ENTRY
+declares a structure that connects the elements in
+the tail queue.
+.Pp
+The macro
+.Nm STAILQ_FIRST
+returns the first item on the tail queue or NULL if the tail queue
+is empty.
+.Pp
+The macro
+.Nm STAILQ_FOREACH
+traverses the tail queue referenced by
+.Fa head
+in the forward direction, assigning each element
+in turn to
+.Fa var .
+.Pp
+The macro
+.Nm STAILQ_INIT
+initializes the tail queue referenced by
+.Fa head .
+.Pp
+The macro
+.Nm STAILQ_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the tail queue.
+.Pp
+The macro
+.Nm STAILQ_INSERT_TAIL
+inserts the new element
+.Fa elm
+at the end of the tail queue.
+.Pp
+The macro
+.Nm STAILQ_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm STAILQ_LAST
+returns the last item on the tail queue.
+If the tail queue is empty the return value is undefined.
+.Pp
+The macro
+.Nm STAILQ_NEXT
+returns the next item on the tail queue, or NULL this item is the last.
+.Pp
+The macro
+.Nm STAILQ_REMOVE_HEAD
+removes the element
+.Fa elm
+from the head of the tail queue.
+For optimum efficiency,
+elements being removed from the head of the tail queue should
+use this macro explicitly rather than the generic
+.Fa STAILQ_REMOVE
+macro.
+.Pp
+The macro
+.Nm STAILQ_REMOVE
+removes the element
+.Fa elm
+from the tail queue.
+.Sh SINGLY-LINKED TAIL QUEUE EXAMPLE
+.Bd -literal
+STAILQ_HEAD(stailhead, entry) head;
+struct stailhead *headp; /* Singly-linked tail queue head. */
+struct entry {
+ ...
+ STAILQ_ENTRY(entry) entries; /* Tail queue. */
+ ...
+} *n1, *n2, *n3, *np;
+
+STAILQ_INIT(&head); /* Initialize the queue. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+STAILQ_INSERT_HEAD(&head, n1, entries);
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the tail. */
+STAILQ_INSERT_TAIL(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+STAILQ_INSERT_AFTER(&head, n1, n2, entries);
+
+ /* Deletion. */
+STAILQ_REMOVE(&head, n2, entry, entries);
+free(n2);
+
+ /* Deletion from the head */
+n3 = STAILQ_FIRST(&head);
+STAILQ_REMOVE_HEAD(&head, entries);
+free(n3);
+
+ /* Forward traversal. */
+STAILQ_FOREACH(np, &head, entries)
+ np-> ...
+ /* TailQ Deletion. */
+while (!STAILQ_EMPTY(&head)) {
+ n1 = STAILQ_HEAD(&head);
+ STAILQ_REMOVE_HEAD(&head, entries);
+ free(n1);
+}
+ /* Faster TailQ Deletion. */
+n1 = STAILQ_FIRST(&head);
+while (n1 != NULL) {
+ n2 = STAILQ_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+STAILQ_INIT(&head);
+.Ed
+.Sh LISTS
+A list is headed by a structure defined by the
+.Nm LIST_HEAD
+macro.
+This structure contains a single pointer to the first element
+on the list.
+The elements are doubly linked so that an arbitrary element can be
+removed without traversing the list.
+New elements can be added to the list after an existing element,
+before an existing element, or at the head of the list.
+A
+.Fa LIST_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+LIST_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Fa HEADNAME
+is the name of the structure to be defined, and
+.Fa TYPE
+is the type of the elements to be linked into the list.
+A pointer to the head of the list can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm LIST_EMPTY
+evaluates to true if their are no elements in the list.
+.Pp
+The macro
+.Nm LIST_ENTRY
+declares a structure that connects the elements in
+the list.
+.Pp
+The macro
+.Nm LIST_FIRST
+returns the first element in the list or NULL if the list
+is empty.
+.Pp
+The macro
+.Nm LIST_FOREACH
+traverses the list referenced by
+.Fa head
+in the forward direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm LIST_INIT
+initializes the list referenced by
+.Fa head .
+.Pp
+The macro
+.Nm LIST_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the list.
+.Pp
+The macro
+.Nm LIST_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm LIST_INSERT_BEFORE
+inserts the new element
+.Fa elm
+before the element
+.Fa listelm .
+.Pp
+The macro
+.Nm LIST_NEXT
+returns the next element in the list, or NULL if this is the last.
+.Pp
+The macro
+.Nm LIST_REMOVE
+removes the element
+.Fa elm
+from the list.
+.Sh LIST EXAMPLE
+.Bd -literal
+LIST_HEAD(listhead, entry) head;
+struct listhead *headp; /* List head. */
+struct entry {
+ ...
+ LIST_ENTRY(entry) entries; /* List. */
+ ...
+} *n1, *n2, *n3, *np;
+
+LIST_INIT(&head); /* Initialize the list. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+LIST_INSERT_HEAD(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+LIST_INSERT_AFTER(n1, n2, entries);
+
+n3 = malloc(sizeof(struct entry)); /* Insert before. */
+LIST_INSERT_BEFORE(n2, n3, entries);
+
+LIST_REMOVE(n2, entries); /* Deletion. */
+free(n2);
+
+ /* Forward traversal. */
+LIST_FOREACH(np, &head, entries)
+ np-> ...
+
+while (!LIST_EMPTY(&head)) { /* List Deletion. */
+ n1 = LIST_FIRST(&head);
+ LIST_REMOVE(n1, entries);
+ free(n1);
+}
+
+n1 = LIST_FIRST(&head); /* Faster List Delete. */
+while (n1 != NULL) {
+ n2 = LIST_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+LIST_INIT(&head);
+.Ed
+.Sh TAIL QUEUES
+A tail queue is headed by a structure defined by the
+.Nm TAILQ_HEAD
+macro.
+This structure contains a pair of pointers,
+one to the first element in the tail queue and the other to
+the last element in the tail queue.
+The elements are doubly linked so that an arbitrary element can be
+removed without traversing the tail queue.
+New elements can be added to the tail queue after an existing element,
+before an existing element, at the head of the tail queue,
+or at the end of the tail queue.
+A
+.Fa TAILQ_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+TAILQ_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Li HEADNAME
+is the name of the structure to be defined, and
+.Li TYPE
+is the type of the elements to be linked into the tail queue.
+A pointer to the head of the tail queue can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm TAILQ_EMPTY
+evaluates to true if there are no items on the tail queue.
+.Pp
+The macro
+.Nm TAILQ_ENTRY
+declares a structure that connects the elements in
+the tail queue.
+.Pp
+The macro
+.Nm TAILQ_FIRST
+returns the first item on the tail queue or NULL if the tail queue
+is empty.
+.Pp
+The macro
+.Nm TAILQ_FOREACH
+traverses the tail queue referenced by
+.Fa head
+in the forward direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm TAILQ_FOREACH_REVERSE
+traverses the tail queue referenced by
+.Fa head
+in the reverse direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm TAILQ_INIT
+initializes the tail queue referenced by
+.Fa head .
+.Pp
+The macro
+.Nm TAILQ_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the tail queue.
+.Pp
+The macro
+.Nm TAILQ_INSERT_TAIL
+inserts the new element
+.Fa elm
+at the end of the tail queue.
+.Pp
+The macro
+.Nm TAILQ_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm TAILQ_INSERT_BEFORE
+inserts the new element
+.Fa elm
+before the element
+.Fa listelm .
+.Pp
+The macro
+.Nm TAILQ_LAST
+returns the last item on the tail queue.
+If the tail queue is empty the return value is undefined.
+.Pp
+The macro
+.Nm TAILQ_NEXT
+returns the next item on the tail queue, or NULL if this item is the last.
+.Pp
+The macro
+.Nm TAILQ_PREV
+returns the previous item on the tail queue, or NULL if this item
+is the first.
+.Pp
+The macro
+.Nm TAILQ_REMOVE
+removes the element
+.Fa elm
+from the tail queue.
+.Sh TAIL QUEUE EXAMPLE
+.Bd -literal
+TAILQ_HEAD(tailhead, entry) head;
+struct tailhead *headp; /* Tail queue head. */
+struct entry {
+ ...
+ TAILQ_ENTRY(entry) entries; /* Tail queue. */
+ ...
+} *n1, *n2, *n3, *np;
+
+TAILQ_INIT(&head); /* Initialize the queue. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+TAILQ_INSERT_HEAD(&head, n1, entries);
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the tail. */
+TAILQ_INSERT_TAIL(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+TAILQ_INSERT_AFTER(&head, n1, n2, entries);
+
+n3 = malloc(sizeof(struct entry)); /* Insert before. */
+TAILQ_INSERT_BEFORE(n2, n3, entries);
+
+TAILQ_REMOVE(&head, n2, entries); /* Deletion. */
+free(n2);
+ /* Forward traversal. */
+TAILQ_FOREACH(np, &head, entries)
+ np-> ...
+ /* Reverse traversal. */
+TAILQ_FOREACH_REVERSE(np, &head, tailhead, entries)
+ np-> ...
+ /* TailQ Deletion. */
+while (!TAILQ_EMPTY(head)) {
+ n1 = TAILQ_FIRST(&head);
+ TAILQ_REMOVE(&head, n1, entries);
+ free(n1);
+}
+ /* Faster TailQ Deletion. */
+
+n1 = TAILQ_FIRST(&head);
+while (n1 != NULL) {
+ n2 = TAILQ_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+TAILQ_INIT(&head);
+.Ed
+.Sh CIRCULAR QUEUES
+A circular queue is headed by a structure defined by the
+.Nm CIRCLEQ_HEAD
+macro.
+This structure contains a pair of pointers,
+one to the first element in the circular queue and the other to the
+last element in the circular queue.
+The elements are doubly linked so that an arbitrary element can be
+removed without traversing the queue.
+New elements can be added to the queue after an existing element,
+before an existing element, at the head of the queue, or at the end
+of the queue.
+A
+.Fa CIRCLEQ_HEAD
+structure is declared as follows:
+.Bd -literal -offset indent
+CIRCLEQ_HEAD(HEADNAME, TYPE) head;
+.Ed
+.Pp
+where
+.Li HEADNAME
+is the name of the structure to be defined, and
+.Li TYPE
+is the type of the elements to be linked into the circular queue.
+A pointer to the head of the circular queue can later be declared as:
+.Bd -literal -offset indent
+struct HEADNAME *headp;
+.Ed
+.Pp
+(The names
+.Li head
+and
+.Li headp
+are user selectable.)
+.Pp
+The macro
+.Nm CIRCLEQ_EMPTY
+evaluates to true if there are no items on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_ENTRY
+declares a structure that connects the elements in
+the circular queue.
+.Pp
+The macro
+.Nm CIRCLEQ_FIRST
+returns the first item on the circle queue.
+.Pp
+The macro
+.Nm CICRLEQ_FOREACH
+traverses the circle queue referenced by
+.Fa head
+in the forward direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm CICRLEQ_FOREACH_REVERSE
+traverses the circle queue referenced by
+.Fa head
+in the reverse direction, assigning each element in turn to
+.Fa var .
+.Pp
+The macro
+.Nm CIRCLEQ_INIT
+initializes the circular queue referenced by
+.Fa head .
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_HEAD
+inserts the new element
+.Fa elm
+at the head of the circular queue.
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_TAIL
+inserts the new element
+.Fa elm
+at the end of the circular queue.
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_AFTER
+inserts the new element
+.Fa elm
+after the element
+.Fa listelm .
+.Pp
+The macro
+.Nm CIRCLEQ_INSERT_BEFORE
+inserts the new element
+.Fa elm
+before the element
+.Fa listelm .
+.Pp
+The macro
+.Nm CIRCLEQ_LAST
+returns the last item on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_NEXT
+returns the next item on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_PREV
+returns the previous item on the circle queue.
+.Pp
+The macro
+.Nm CIRCLEQ_REMOVE
+removes the element
+.Fa elm
+from the circular queue.
+.Sh CIRCULAR QUEUE EXAMPLE
+.Bd -literal
+CIRCLEQ_HEAD(circleq, entry) head;
+struct circleq *headp; /* Circular queue head. */
+struct entry {
+ ...
+ CIRCLEQ_ENTRY(entry) entries; /* Circular queue. */
+ ...
+} *n1, *n2, *np;
+
+CIRCLEQ_INIT(&head); /* Initialize the circular queue. */
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the head. */
+CIRCLEQ_INSERT_HEAD(&head, n1, entries);
+
+n1 = malloc(sizeof(struct entry)); /* Insert at the tail. */
+CIRCLEQ_INSERT_TAIL(&head, n1, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert after. */
+CIRCLEQ_INSERT_AFTER(&head, n1, n2, entries);
+
+n2 = malloc(sizeof(struct entry)); /* Insert before. */
+CIRCLEQ_INSERT_BEFORE(&head, n1, n2, entries);
+
+CIRCLEQ_REMOVE(&head, n1, entries); /* Deletion. */
+free(n1);
+ /* Forward traversal. */
+CIRCLEQ_FOREACH(np, &head, entries)
+ np-> ...
+ /* Reverse traversal. */
+CIRCLEQ_FOREACH_REVERSE(np, &head, entries)
+ np-> ...
+ /* CircleQ Deletion. */
+while (CIRCLEQ_FIRST(&head) != (void *)&head) {
+ n1 = CIRCLEQ_HEAD(&head);
+ CIRCLEQ_REMOVE(&head, n1, entries);
+ free(n1);
+}
+ /* Faster CircleQ Deletion. */
+n1 = CIRCLEQ_FIRST(&head);
+while (n1 != (void *)&head) {
+ n2 = CIRCLEQ_NEXT(n1, entries);
+ free(n1);
+ n1 = n2;
+}
+CIRCLEQ_INIT(&head);
+.Ed
+.Sh HISTORY
+The
+.Nm queue
+functions first appeared in
+.Bx 4.4 .
projects / yasm / commitdiff