#undef CHECK_BETTER
-int vp10_full_range_search_c(const MACROBLOCK *x,
- const search_site_config *cfg,
- MV *ref_mv, MV *best_mv,
- int search_param, int sad_per_bit, int *num00,
- const vp9_variance_fn_ptr_t *fn_ptr,
- const MV *center_mv) {
+// Exhuastive motion search around a given centre position with a given
+// step size.
+static int exhuastive_mesh_search(const MACROBLOCK *x,
+ MV *ref_mv, MV *best_mv,
+ int range, int step, int sad_per_bit,
+ const vp9_variance_fn_ptr_t *fn_ptr,
+ const MV *center_mv) {
const MACROBLOCKD *const xd = &x->e_mbd;
const struct buf_2d *const what = &x->plane[0].src;
const struct buf_2d *const in_what = &xd->plane[0].pre[0];
- const int range = 64;
- const MV fcenter_mv = {center_mv->row >> 3, center_mv->col >> 3};
+ MV fcenter_mv = {center_mv->row, center_mv->col};
unsigned int best_sad = INT_MAX;
int r, c, i;
int start_col, end_col, start_row, end_row;
+ int col_step = (step > 1) ? step : 4;
- // The cfg and search_param parameters are not used in this search variant
- (void)cfg;
- (void)search_param;
+ assert(step >= 1);
- clamp_mv(ref_mv, x->mv_col_min, x->mv_col_max, x->mv_row_min, x->mv_row_max);
- *best_mv = *ref_mv;
- *num00 = 11;
+ clamp_mv(&fcenter_mv, x->mv_col_min, x->mv_col_max,
+ x->mv_row_min, x->mv_row_max);
+ *best_mv = fcenter_mv;
best_sad = fn_ptr->sdf(what->buf, what->stride,
- get_buf_from_mv(in_what, ref_mv), in_what->stride) +
- mvsad_err_cost(x, ref_mv, &fcenter_mv, sad_per_bit);
- start_row = VPXMAX(-range, x->mv_row_min - ref_mv->row);
- start_col = VPXMAX(-range, x->mv_col_min - ref_mv->col);
- end_row = VPXMIN(range, x->mv_row_max - ref_mv->row);
- end_col = VPXMIN(range, x->mv_col_max - ref_mv->col);
-
- for (r = start_row; r <= end_row; ++r) {
- for (c = start_col; c <= end_col; c += 4) {
- if (c + 3 <= end_col) {
- unsigned int sads[4];
- const uint8_t *addrs[4];
- for (i = 0; i < 4; ++i) {
- const MV mv = {ref_mv->row + r, ref_mv->col + c + i};
- addrs[i] = get_buf_from_mv(in_what, &mv);
- }
-
- fn_ptr->sdx4df(what->buf, what->stride, addrs, in_what->stride, sads);
-
- for (i = 0; i < 4; ++i) {
- if (sads[i] < best_sad) {
- const MV mv = {ref_mv->row + r, ref_mv->col + c + i};
- const unsigned int sad = sads[i] +
- mvsad_err_cost(x, &mv, &fcenter_mv, sad_per_bit);
- if (sad < best_sad) {
- best_sad = sad;
- *best_mv = mv;
- }
+ get_buf_from_mv(in_what, &fcenter_mv), in_what->stride) +
+ mvsad_err_cost(x, &fcenter_mv, ref_mv, sad_per_bit);
+ start_row = VPXMAX(-range, x->mv_row_min - fcenter_mv.row);
+ start_col = VPXMAX(-range, x->mv_col_min - fcenter_mv.col);
+ end_row = VPXMIN(range, x->mv_row_max - fcenter_mv.row);
+ end_col = VPXMIN(range, x->mv_col_max - fcenter_mv.col);
+
+ for (r = start_row; r <= end_row; r += step) {
+ for (c = start_col; c <= end_col; c += col_step) {
+ // Step > 1 means we are not checking every location in this pass.
+ if (step > 1) {
+ const MV mv = {fcenter_mv.row + r, fcenter_mv.col + c};
+ unsigned int sad = fn_ptr->sdf(what->buf, what->stride,
+ get_buf_from_mv(in_what, &mv), in_what->stride);
+ if (sad < best_sad) {
+ sad += mvsad_err_cost(x, &mv, ref_mv, sad_per_bit);
+ if (sad < best_sad) {
+ best_sad = sad;
+ *best_mv = mv;
}
}
} else {
- for (i = 0; i < end_col - c; ++i) {
- const MV mv = {ref_mv->row + r, ref_mv->col + c + i};
- unsigned int sad = fn_ptr->sdf(what->buf, what->stride,
- get_buf_from_mv(in_what, &mv), in_what->stride);
- if (sad < best_sad) {
- sad += mvsad_err_cost(x, &mv, &fcenter_mv, sad_per_bit);
+ // 4 sads in a single call if we are checking every location
+ if (c + 3 <= end_col) {
+ unsigned int sads[4];
+ const uint8_t *addrs[4];
+ for (i = 0; i < 4; ++i) {
+ const MV mv = {fcenter_mv.row + r, fcenter_mv.col + c + i};
+ addrs[i] = get_buf_from_mv(in_what, &mv);
+ }
+ fn_ptr->sdx4df(what->buf, what->stride, addrs,
+ in_what->stride, sads);
+
+ for (i = 0; i < 4; ++i) {
+ if (sads[i] < best_sad) {
+ const MV mv = {fcenter_mv.row + r, fcenter_mv.col + c + i};
+ const unsigned int sad = sads[i] +
+ mvsad_err_cost(x, &mv, ref_mv, sad_per_bit);
+ if (sad < best_sad) {
+ best_sad = sad;
+ *best_mv = mv;
+ }
+ }
+ }
+ } else {
+ for (i = 0; i < end_col - c; ++i) {
+ const MV mv = {fcenter_mv.row + r, fcenter_mv.col + c + i};
+ unsigned int sad = fn_ptr->sdf(what->buf, what->stride,
+ get_buf_from_mv(in_what, &mv), in_what->stride);
if (sad < best_sad) {
- best_sad = sad;
- *best_mv = mv;
+ sad += mvsad_err_cost(x, &mv, ref_mv, sad_per_bit);
+ if (sad < best_sad) {
+ best_sad = sad;
+ *best_mv = mv;
+ }
}
}
}
return bestsme;
}
+#define MIN_RANGE 7
+#define MAX_RANGE 256
+#define MIN_INTERVAL 1
+// Runs an limited range exhaustive mesh search using a pattern set
+// according to the encode speed profile.
+static int full_pixel_exhaustive(VP10_COMP *cpi, MACROBLOCK *x,
+ MV *centre_mv_full, int sadpb, int *cost_list,
+ const vp9_variance_fn_ptr_t *fn_ptr,
+ const MV *ref_mv, MV *dst_mv) {
+ const SPEED_FEATURES *const sf = &cpi->sf;
+ MV temp_mv = {centre_mv_full->row, centre_mv_full->col};
+ MV f_ref_mv = {ref_mv->row >> 3, ref_mv->col >> 3};
+ int bestsme;
+ int i;
+ int interval = sf->mesh_patterns[0].interval;
+ int range = sf->mesh_patterns[0].range;
+ int baseline_interval_divisor;
+
+ // Keep track of number of exhaustive calls (this frame in this thread).
+ ++(*x->ex_search_count_ptr);
+
+ // Trap illegal values for interval and range for this function.
+ if ((range < MIN_RANGE) || (range > MAX_RANGE) ||
+ (interval < MIN_INTERVAL) || (interval > range))
+ return INT_MAX;
+
+ baseline_interval_divisor = range / interval;
+
+ // Check size of proposed first range against magnitude of the centre
+ // value used as a starting point.
+ range = VPXMAX(range, (5 * VPXMAX(abs(temp_mv.row), abs(temp_mv.col))) / 4);
+ range = VPXMIN(range, MAX_RANGE);
+ interval = VPXMAX(interval, range / baseline_interval_divisor);
+
+ // initial search
+ bestsme = exhuastive_mesh_search(x, &f_ref_mv, &temp_mv, range,
+ interval, sadpb, fn_ptr, &temp_mv);
+
+ if ((interval > MIN_INTERVAL) && (range > MIN_RANGE)) {
+ // Progressive searches with range and step size decreasing each time
+ // till we reach a step size of 1. Then break out.
+ for (i = 1; i < MAX_MESH_STEP; ++i) {
+ // First pass with coarser step and longer range
+ bestsme = exhuastive_mesh_search(x, &f_ref_mv, &temp_mv,
+ sf->mesh_patterns[i].range,
+ sf->mesh_patterns[i].interval,
+ sadpb, fn_ptr, &temp_mv);
+
+ if (sf->mesh_patterns[i].interval == 1)
+ break;
+ }
+ }
+
+ if (bestsme < INT_MAX)
+ bestsme = vp10_get_mvpred_var(x, &temp_mv, ref_mv, fn_ptr, 1);
+ *dst_mv = temp_mv;
+
+ // Return cost list.
+ if (cost_list) {
+ calc_int_cost_list(x, ref_mv, sadpb, fn_ptr, dst_mv, cost_list);
+ }
+ return bestsme;
+}
+
int vp10_full_search_sad_c(const MACROBLOCK *x, const MV *ref_mv,
int sad_per_bit, int distance,
const vp9_variance_fn_ptr_t *fn_ptr,
return best_sad;
}
+#define MIN_EX_SEARCH_LIMIT 128
+static int is_exhaustive_allowed(VP10_COMP *cpi, MACROBLOCK *x) {
+ const SPEED_FEATURES *const sf = &cpi->sf;
+ const int max_ex = VPXMAX(MIN_EX_SEARCH_LIMIT,
+ (*x->m_search_count_ptr * sf->max_exaustive_pct) / 100);
+
+ return sf->allow_exhaustive_searches &&
+ (sf->exhaustive_searches_thresh < INT_MAX) &&
+ (*x->ex_search_count_ptr <= max_ex) &&
+ !cpi->rc.is_src_frame_alt_ref;
+}
+
int vp10_full_pixel_search(VP10_COMP *cpi, MACROBLOCK *x,
BLOCK_SIZE bsize, MV *mvp_full,
int step_param, int error_per_bit,
cost_list[4] = INT_MAX;
}
+ // Keep track of number of searches (this frame in this thread).
+ ++(*x->m_search_count_ptr);
+
switch (method) {
case FAST_DIAMOND:
var = vp10_fast_dia_search(x, mvp_full, step_param, error_per_bit, 0,
var = vp10_full_pixel_diamond(cpi, x, mvp_full, step_param, error_per_bit,
MAX_MVSEARCH_STEPS - 1 - step_param,
1, cost_list, fn_ptr, ref_mv, tmp_mv);
+
+ // Should we allow a follow on exhaustive search?
+ if (is_exhaustive_allowed(cpi, x)) {
+ int64_t exhuastive_thr = sf->exhaustive_searches_thresh;
+ exhuastive_thr >>= 8 - (b_width_log2_lookup[bsize] +
+ b_height_log2_lookup[bsize]);
+
+ // Threshold variance for an exhaustive full search.
+ if (var > exhuastive_thr) {
+ int var_ex;
+ MV tmp_mv_ex;
+ var_ex = full_pixel_exhaustive(cpi, x, tmp_mv,
+ error_per_bit, cost_list, fn_ptr,
+ ref_mv, &tmp_mv_ex);
+
+ if (var_ex < var) {
+ var = var_ex;
+ *tmp_mv = tmp_mv_ex;
+ }
+ }
+ }
+ break;
+
break;
default:
assert(0 && "Invalid search method.");
#include "vpx_dsp/vpx_dsp_common.h"
+// Mesh search patters for various speed settings
+static MESH_PATTERN best_quality_mesh_pattern[MAX_MESH_STEP] =
+ {{64, 4}, {28, 2}, {15, 1}, {7, 1}};
+
+#define MAX_MESH_SPEED 5 // Max speed setting for mesh motion method
+static MESH_PATTERN good_quality_mesh_patterns[MAX_MESH_SPEED + 1]
+ [MAX_MESH_STEP] =
+ {{{64, 8}, {28, 4}, {15, 1}, {7, 1}},
+ {{64, 8}, {28, 4}, {15, 1}, {7, 1}},
+ {{64, 8}, {14, 2}, {7, 1}, {7, 1}},
+ {{64, 16}, {24, 8}, {12, 4}, {7, 1}},
+ {{64, 16}, {24, 8}, {12, 4}, {7, 1}},
+ {{64, 16}, {24, 8}, {12, 4}, {7, 1}},
+ };
+static unsigned char good_quality_max_mesh_pct[MAX_MESH_SPEED + 1] =
+ {50, 25, 15, 5, 1, 1};
+
// Intra only frames, golden frames (except alt ref overlays) and
// alt ref frames tend to be coded at a higher than ambient quality
static int frame_is_boosted(const VP10_COMP *cpi) {
sf->static_segmentation = 0;
sf->adaptive_rd_thresh = 1;
sf->use_fast_coef_costing = 1;
+ sf->allow_exhaustive_searches = 0;
+ sf->exhaustive_searches_thresh = INT_MAX;
if (speed >= 1) {
sf->use_square_partition_only = !frame_is_intra_only(cm);
set_good_speed_feature(cpi, cm, sf, oxcf->speed);
cpi->full_search_sad = vp10_full_search_sad;
- cpi->diamond_search_sad = oxcf->mode == BEST ? vp10_full_range_search
- : vp10_diamond_search_sad;
+ cpi->diamond_search_sad = vp10_diamond_search_sad;
+
+ sf->allow_exhaustive_searches = 1;
+ if (oxcf->mode == BEST) {
+ if (cpi->twopass.fr_content_type == FC_GRAPHICS_ANIMATION)
+ sf->exhaustive_searches_thresh = (1 << 20);
+ else
+ sf->exhaustive_searches_thresh = (1 << 21);
+ sf->max_exaustive_pct = 100;
+ for (i = 0; i < MAX_MESH_STEP; ++i) {
+ sf->mesh_patterns[i].range = best_quality_mesh_pattern[i].range;
+ sf->mesh_patterns[i].interval = best_quality_mesh_pattern[i].interval;
+ }
+ } else {
+ int speed = (oxcf->speed > MAX_MESH_SPEED) ? MAX_MESH_SPEED : oxcf->speed;
+ if (cpi->twopass.fr_content_type == FC_GRAPHICS_ANIMATION)
+ sf->exhaustive_searches_thresh = (1 << 22);
+ else
+ sf->exhaustive_searches_thresh = (1 << 23);
+ sf->max_exaustive_pct = good_quality_max_mesh_pct[speed];
+ if (speed > 0)
+ sf->exhaustive_searches_thresh = sf->exhaustive_searches_thresh << 1;
+
+ for (i = 0; i < MAX_MESH_STEP; ++i) {
+ sf->mesh_patterns[i].range =
+ good_quality_mesh_patterns[speed][i].range;
+ sf->mesh_patterns[i].interval =
+ good_quality_mesh_patterns[speed][i].interval;
+ }
+ }
// Slow quant, dct and trellis not worthwhile for first pass
// so make sure they are always turned off.
projects / libvpx / commitdiff