a list of all available options along with short explanations running
./configure --help. Our manual documents the different options
separately. You will find the core options in the appendix, while the
- different extension specific options are descibed on the reference
+ different extension specific options are described on the reference
pages.
When PHP is configured, you are ready to build the module and/or
'make test'. server-tests was developed to provide support for
testing PHP under it's primary environment, HTTP, and can run the
PHP tests under any of the SAPI modules that are direct executables,
-or are accessable via HTTP.
+or are accessible via HTTP.
[New features]
----------------
$filename full native path to file, will become PATH_TRANSLATED
$filepath =dirname($filename)
$scriptname this is what will become SCRIPT_NAME unless you override it
- $docroot the equivelant of DOCUMENT_ROOT under Apache
+ $docroot the equivalent of DOCUMENT_ROOT under Apache
$cwd the directory that the test is being initiated from
$this->conf all server-tests configuration vars
$this->env all environment variables that will get passed to the test
This section is also eval'd, and is similar in nature to --ENV--. However,
this section is used to build the url used in an HTTP request. Valid values
to set in this section would include:
- SCRIPT_NAME The inital part of the request url
+ SCRIPT_NAME The initial part of the request url
PATH_INFO The pathinfo part of a request url
FRAGMENT The fragment section of a url (after #)
QUERY_STRING The query part of a url (after ?)
*
* CALENDAR OVERVIEW
*
- * Julias Ceasar created the calendar in 46 B.C. as a modified form of
+ * Julius Caesar created the calendar in 46 B.C. as a modified form of
* the old Roman republican calendar which was based on lunar cycles.
* The new Julian calendar set fixed lengths for the months, abandoning
* the lunar cycle. It also specified that there would be exactly 12
// -uses --INI-- section with date.timezone=UTC
// -uses putenv('TZ=UTC')
// date.timezone=UTC
-// -if ommitted from easter_date.phpt, outputs DATE_TZ_ERRMSG warning
+// -if omitted from easter_date.phpt, outputs DATE_TZ_ERRMSG warning
// -easter_date() calls mktime() and localtime()
// -whereas unixtojd(1000000000) calls localtime(1000000000)
-// -if ommitted from unixtojd.phpt, does NOT output DATE_TZ_ERRMSG
+// -if omitted from unixtojd.phpt, does NOT output DATE_TZ_ERRMSG
//
// unixtojd() calls php_localtime_r() which for Pacific timezone systems, returns a time -8 hours
// -this incorrect localtime is passed to the julian date conversion (GregorianToSDN) function which works (probably correctly)
{
uint32_t i;
- /* If there is no transistion time, we pick the first one, if that doesn't
+ /* If there is no transition time, we pick the first one, if that doesn't
* exist we return NULL */
if (!tz->timecnt || !tz->trans) {
*transition_time = 0;
return NULL;
}
- /* If the TS is lower than the first transistion time, then we scan over
- * all the transistion times to find the first non-DST one, or the first
+ /* If the TS is lower than the first transition time, then we scan over
+ * all the transition times to find the first non-DST one, or the first
* one in case there are only DST entries. Not sure which smartass came up
* with this idea in the first though :) */
if (ts < tz->trans[0]) {
--SKIPIF--
<?php
if (!@putenv("TZ=EST5") || getenv("TZ") != 'EST5') {
- die("skip unable to change TZ enviroment variable\n");
+ die("skip unable to change TZ environment variable\n");
}
?>
--FILE--
die("skip. set TZ env is not supported at runtime.");
}
if (!@putenv("TZ=US/Eastern") || getenv("TZ") != 'US/Eastern') {
- die("skip unable to change TZ enviroment variable\n");
+ die("skip unable to change TZ environment variable\n");
}
?>
--FILE--
date.timezone=GMT0
--SKIPIF--
if (!@putenv("TZ=GMT0") || getenv("TZ") != 'GMT0') {
- die("skip unable to change TZ enviroment variable\n");
+ die("skip unable to change TZ environment variable\n");
}
--FILE--
<?php
date.timezone=GMT0
--SKIPIF--
if (!@putenv("TZ=GMT0") || getenv("TZ") != 'GMT0') {
- die("skip unable to change TZ enviroment variable\n");
+ die("skip unable to change TZ environment variable\n");
}
--FILE--
<?php
dl('fileinfo.' . PHP_SHLIB_SUFFIX);
}
if(!extension_loaded('fileinfo')) {
- die("fileinfo extension is not avaliable, please compile it.\n");
+ die("fileinfo extension is not available, please compile it.\n");
}
// normal operation
*
* Revision 1.8 93/02/19 15:01:26 ian
* Numerous changes from Guy Harris too numerous to mention but including
- * byte-order independance, fixing "old-style masking", etc. etc. A bugfix
+ * byte-order independence, fixing "old-style masking", etc. etc. A bugfix
* for broken symlinks from martin@@d255s004.zfe.siemens.de.
*
* Revision 1.7 93/01/05 14:57:27 ian
>7 string x version %.2s
# We skip the path here, because it is often long (so file will
# truncate it) and mostly redundant.
-# The inverted index functionality was added some time betwen
+# The inverted index functionality was added some time between
# versions 11 and 15, so look for -q if version is above 14:
>7 string >14
>>10 search/100 \ -q\ with inverted index
# .cwk
0 string \002\000\210\003\102\117\102\117\000\001\206 Claris works document
# .plt
-0 string \020\341\000\000\010\010 Claris Works pallete files .plt
+0 string \020\341\000\000\010\010 Claris Works palette files .plt
# .msp a dictionary file I am not sure about this I have only one .msp file
0 string \002\271\262\000\040\002\000\164 Claris works dictionary
>6 byte&0x04 =0x8 \b, [4-Scr]
#------------------------------------------------------------------------------
-# gameboy: file(1) magic for the Nintendo (Color) Gameboy raw ROM format
+# game boy: file(1) magic for the Nintendo (Color) Game Boy raw ROM format
#
-0x104 belong 0xCEED6666 Gameboy ROM:
+0x104 belong 0xCEED6666 Game Boy ROM:
>0x134 string >\0 "%.16s"
>0x146 byte 0x03 \b,[SGB]
>0x147 byte 0x00 \b, [ROM ONLY]
0 string \x01ZZZZZ\x01 3DO "Opera" file system
# From Gurkan Sengun <gurkan@linuks.mine.nu>, www.linuks.mine.nu
-0 string GBS Nintendo Gameboy Music/Audio Data
-12 string GameBoy\ Music\ Module Nintendo Gameboy Music Module
+0 string GBS Nintendo Game Boy Music/Audio Data
+12 string GameBoy\ Music\ Module Nintendo Game Boy Music Module
# Playstations Patch Files from: From: Thomas Klausner <tk@giga.or.at>
0 string PPF30 Playstation Patch File version 3.0
# $File: oasis,v 1.1 2011/03/15 02:09:38 christos Exp $
# OASIS
# Summary: OASIS stream file
-# Long descripton: Open Artwork System Interchange Standard
+# Long description: Open Artwork System Interchange Standard
# File extension: .oas
# Full name: Ben Cowley (bcowley@broadcom.com)
# Philip Dixon (pdixon@broadcom.com)
ftptype_t type; /* current transfer type */
int pasv; /* 0=off; 1=pasv; 2=ready */
php_sockaddr_storage pasvaddr; /* passive mode address */
- long timeout_sec; /* User configureable timeout (seconds) */
- int autoseek; /* User configureable autoseek flag */
+ long timeout_sec; /* User configurable timeout (seconds) */
+ int autoseek; /* User configurable autoseek flag */
int nb; /* "nonblocking" transfer in progress */
databuf_t *data; /* Data connection for "nonblocking" transfers */
/* Set the contrast level <contrast> for the image <src> */
int gdImageContrast(gdImagePtr src, double contrast);
-/* Simply adds or substracts respectively red, green or blue to a pixel */
+/* Simply adds or subtracts respectively red, green or blue to a pixel */
int gdImageColor(gdImagePtr src, const int red, const int green, const int blue, const int alpha);
/* Image convolution by a 3x3 custom matrix */
/* This is potentially great stuff, but fails against the test
program at the end. This would probably be much more
- efficent than the implementation currently in gd.c if the
+ efficient than the implementation currently in gd.c if the
errors in the output were corrected. TBB */
#if 0
return NULL;
}
- /* FIXME - This mapping stuff is imcomplete - where is the spec? */
+ /* FIXME - This mapping stuff is incomplete - where is the spec? */
/* EAM - It's worse than that. It's pointless to match character encodings here.
* As currently written, the stored a->face->charmap only matches one of
* the actual charmaps and we cannot know at this stage if it is the right
* Y2/U2/V2: The Y/U/V data of the second image
*
* Returns the PSNR (http://en.wikipedia.org/wiki/Peak_signal-to-noise_ratio)
- * value computed bewteen the two images
+ * value computed between the two images
*/
double GetPSNRYuv(const uint8* Y1,
const uint8* U1,
* imgdata: data buffer containing webp image
* imgdata_size: size of the imgdata buffer
*
- * Returns the PSNR value computed bewteen the two images
+ * Returns the PSNR value computed between the two images
*/
double WebPGetPSNR(const uint8* Y1,
const uint8* U1,
* 3. p_Y/p_U/p_V : pointer to the Y/U/V data buffer (this routine will
* allocate memory for the buffer, fill the buffer with
* appropriate data and transfer owner ship of the buffer
- * to caller. Caller is reponsible for freeing the memory).
+ * to caller. Caller is responsible for freeing the memory).
* Note that the memory for Y, U, V buffers is alloacted
* in one chunk, hence one should call free(*p_Y) only.
* Do not try to free the U and V buffers.
/*
default transaction on default link
First open transaction on link will be default.
-$tr_def_l1 may be ommited. All queryes without link and trans
+$tr_def_l1 may be omitted. All queryes without link and trans
parameters run in this context
*/
{
php_libxml_func_handler export_hnd;
- /* Initialize in case this module hasnt been loaded yet */
+ /* Initialize in case this module hasn't been loaded yet */
php_libxml_initialize();
export_hnd.export_func = export_function;
encodings, following conditions have to be satisfied in order
to use them:
- per byte encoding
- - single byte charactor in range of 00h-7fh which is compatible
+ - single byte character in range of 00h-7fh which is compatible
with ASCII
- multibyte without 00h-7fh
In case of Japanese, EUC-JP and UTF-8 are the only encoding that
entering the script parser.
Be aware that auto detection may fail under some conditions.
- For best auto detection, add multibyte charactor at beginning of
+ For best auto detection, add multibyte character at beginning of
script.
*
*/
-/* charactor property table */
+/* character property table */
#define MBFL_CHP_CTL 0x01
#define MBFL_CHP_DIGIT 0x02
#define MBFL_CHP_UALPHA 0x04
#define MBFL_ENCTYPE_ENC_STRM 0x00002000
#define MBFL_ENCTYPE_GL_UNSAFE 0x00004000
-/* wchar plane, special charactor */
+/* wchar plane, special character */
#define MBFL_WCSPLANE_MASK 0xffff
#define MBFL_WCSPLANE_UCS2MAX 0x00010000
#define MBFL_WCSPLANE_UTF32MAX 0x00110000
/*
* Pass a Japanese string and a mixed Japanese and ASCII string to mb_strtolower
- * to check correct conversion is occuring (Japanese characters should not be converted).
+ * to check correct conversion is occurring (Japanese characters should not be converted).
*/
echo "*** Testing mb_strtolower() : usage variations ***\n";
/*
* Pass a Japanese string and a mixed Japanese and ASCII string to mb_strtolower
- * to check correct conversion is occuring (Japanese characters should not be converted).
+ * to check correct conversion is occurring (Japanese characters should not be converted).
*/
echo "*** Testing mb_strtoupper() : usage variations ***\n";
$data = b"This is the secret message which must be encrypted";
$mode = MCRYPT_DECRYPT;
-// tripledes uses keys upto 192 bits (24 bytes)
+// tripledes uses keys up to 192 bits (24 bytes)
$keys = array(
b'12345678',
b'12345678901234567890',
$data = b"This is the secret message which must be encrypted";
$mode = MCRYPT_ENCRYPT;
-// tripledes uses keys upto 192 bits (24 bytes)
+// tripledes uses keys up to 192 bits (24 bytes)
$keys = array(
b'12345678',
b'12345678901234567890',
//test tripledes, aes
//test different lengths of key, iv
//test no iv being passed on CBC, ECB
-//test upto 32 bytes with unlimited strength
+//test up to 32 bytes with unlimited strength
$cipher = MCRYPT_TRIPLEDES;
$mode = MCRYPT_MODE_CBC;
$data = b'This is the secret message which must be encrypted';
-// tripledes uses keys upto 192 bits (24 bytes)
+// tripledes uses keys up to 192 bits (24 bytes)
$keys = array(
b'12345678',
b'12345678901234567890',
$mode = MCRYPT_MODE_ECB;
$data = b'This is the secret message which must be encrypted';
-// tripledes uses keys upto 192 bits (24 bytes)
+// tripledes uses keys up to 192 bits (24 bytes)
$keys = array(
b'12345678',
b'12345678901234567890',
$mode = MCRYPT_MODE_CBC;
$data = b'This is the secret message which must be encrypted';
-// keys upto 128 bits (16 bytes)
+// keys up to 128 bits (16 bytes)
$keys = array(
null,
'',
if ($IS_MYSQLND) {
/*
Advantage mysqlnd -
- The metadata mysqlnd has availabe after prepare is better than
- the one made availabe by the MySQL Client Library (libmysql).
+ The metadata mysqlnd has available after prepare is better than
+ the one made available by the MySQL Client Library (libmysql).
"libmysql" will give wrong results and that is OK -
http://bugs.mysql.com/bug.php?id=47483
*/
$idx = 0;
while ($row = mysqli_fetch_assoc($res)) {
- /* mysqlnd: force seperation - create copies */
+ /* mysqlnd: force separation - create copies */
$references[$idx] = array(
'id' => &$row['id'],
'label' => $row['label'] . '');
mysqli_data_seek($res, 0);
while ($row = mysqli_fetch_assoc($res)) {
- /* mysqlnd: force seperation - create copies */
+ /* mysqlnd: force separation - create copies */
$references[$idx] = array(
'id' => &$row['id'],
'label' => $row['label'] . '');
printf("[003] [%d] %s\n", mysqli_errno($link), mysqli_error($link));
while ($row = mysqli_fetch_assoc($res)) {
- /* mysqlnd: force seperation - create copies*/
+ /* mysqlnd: force separation - create copies*/
$references[$idx] = array(
'id' => &$row['id'],
'label' => $row['label'] . '');
%unicode|string%(1) "a" refcount(1)
}
}
-done!
\ No newline at end of file
+done!
$references[$idx]['row_copy'] = $rows[$i];
$references[$idx]['id_ref'] = &$rows[$i]['id'];
$references[$idx]['id_copy'] = $rows[$i]['id'];
- /* enforce seperation */
+ /* enforce separation */
$references[$idx]['id_copy_mod']= $rows[$i]['id'] + 0;
}
mysqli_free_result($res);
long(2) refcount(1)
}
}
-done!
\ No newline at end of file
+done!
echo "Test 1:\n";
$stmt = $link->prepare("SELECT ? FOO");
- var_dump($foo); // here you can see the bar member var beeing a string
+ var_dump($foo); // here you can see the bar member var being a string
$stmt->bind_param("s", $foo->bar);
- var_dump($foo); // this will show $foo->bar beeing a reference string
+ var_dump($foo); // this will show $foo->bar being a reference string
$stmt->bind_result($one);
$stmt->execute();
$stmt->fetch();
Process Control Module for PHP (pcntl)
This module will attempt to implement all features related to process spawning and
-control (fork(), waitpid(), signal(), WIF's, etc). This is extremly experimental,
+control (fork(), waitpid(), signal(), WIF's, etc). This is extremely experimental,
with hope to become stable on most UNIX's. I greatly apreciate any feedback, fixes,
and or suggestions on how to improve/better implement
this functionality.
7. Minor change to pcretest.c to avoid a compiler warning.
-8. Added four artifical Unicode properties to help with an option to make
+8. Added four artificial Unicode properties to help with an option to make
\s etc use properties (see next item). The new properties are: Xan
(alphanumeric), Xsp (Perl space), Xps (POSIX space), and Xwd (word).
(i) The utf8_table... variables are now declared "const".
(ii) The code for \cx, which used the "case flipping" table to upper case
- lower case letters, now just substracts 32. This is ASCII-specific,
+ lower case letters, now just subtracts 32. This is ASCII-specific,
but the whole concept of \cx is ASCII-specific, so it seems
reasonable.
number or by name). When named groups are used, there may be more than one
group with the same name. In this case, a reference by name generates OP_DNREF
or OP_DNREFI. These are followed by two counts: the index (not the byte offset)
-in the group name table of the first entry for the requred name, followed by
+in the group name table of the first entry for the required name, followed by
the number of groups with the same name.
avoided by linking with libedit (which has a BSD licence) instead.
Enabling libreadline causes the -lreadline option to be added to the pcretest
- build. In many operating environments with a sytem-installed readline
+ build. In many operating environments with a system-installed readline
library this is sufficient. However, in some environments (e.g. if an
unmodified distribution version of readline is in use), it may be necessary
to specify something like LIBS="-lncurses" as well. This is because, to quote
pcretest linked in this way, there may be licensing issues.
Setting this option causes the -lreadline option to be added to the
- pcretest build. In many operating environments with a sytem-installed
+ pcretest build. In many operating environments with a system-installed
libreadline this is sufficient. However, in some environments (e.g. if
an unmodified distribution version of readline is in use), some extra
configuration may be necessary. The INSTALL file for libreadline says
the result of a recursive call to match() whatever happened so it was
possible to reduce stack usage by turning this into a tail recursion,
except in the case of a possibly empty group. However, now that there is
- the possiblity of (*THEN) occurring in the final alternative, this
+ the possibility of (*THEN) occurring in the final alternative, this
optimization is no longer always possible.
We can optimize if we know there are no (*THEN)s in the pattern; at present
tcode = set_table_bit(start_bits, tcode + 1, TRUE, cd, utf);
break;
- /* Single-char upto sets the bit and tries the next */
+ /* Single-char up to sets the bit and tries the next */
case OP_UPTO:
case OP_MINUPTO:
return 1;
}
-/* Match succeded */
+/* Match succeeded */
printf("\nMatch succeeded at offset %d\n", ovector[0]);
return 1;
}
- /* Match succeded */
+ /* Match succeeded */
printf("\nMatch succeeded again at offset %d\n", ovector[0]);
}
/* }}} */
-/* {{{ proto object PDO::prepare(string statment [, array options])
+/* {{{ proto object PDO::prepare(string statement [, array options])
Prepares a statement for execution and returns a statement object */
static PHP_METHOD(PDO, prepare)
{
/* }}} */
/* {{{ proto bool PDOStatement::nextRowset()
- Advances to the next rowset in a multi-rowset statement handle. Returns true if it succeded, false otherwise */
+ Advances to the next rowset in a multi-rowset statement handle. Returns true if it succeeded, false otherwise */
static int pdo_stmt_do_next_rowset(pdo_stmt_t *stmt TSRMLS_DC)
{
--TEST--
-PDO Common: Bug #39656 (Crash when calling fetch() on a PDO statment object after closeCursor())
+PDO Common: Bug #39656 (Crash when calling fetch() on a PDO statement object after closeCursor())
--SKIPIF--
<?php
if (!extension_loaded('pdo')) die('skip');
}
if ($label !== $value) {
- printf("[%03d + 3] Returned value seems to be wrong (%d vs. %d charachters). Check manually\n",
+ printf("[%03d + 3] Returned value seems to be wrong (%d vs. %d characters). Check manually\n",
$offset, strlen($label), strlen($value));
return false;
}
$ret = $stmt->fetch(PDO::FETCH_ASSOC);
if ($ret['label'] !== $value) {
- printf("[%03d + 3] Returned value seems to be wrong (%d vs. %d charachters). Check manually\n",
+ printf("[%03d + 3] Returned value seems to be wrong (%d vs. %d characters). Check manually\n",
$offset, strlen($ret['label']), strlen($value));
return false;
}
somewhere in your system to build PHP with PostgreSQL support.
==== Note For PostgreSQL 7.2 ====
-I've tested upto 7.2.2.
+I've tested up to 7.2.2.
==== TODO List ===
Make pg_convert() smater.
/* ensure that the link did not die */
if (PGG(auto_reset_persistent) & 1) {
/* need to send & get something from backend to
- make sure we catch CONNECTION_BAD everytime */
+ make sure we catch CONNECTION_BAD every time */
PGresult *pg_result;
pg_result = PQexec(le->ptr, "select 1");
PQclear(pg_result);
}
PGG(num_links)++;
}
- /* set notice processer */
+ /* set notice processor */
if (! PGG(ignore_notices) && Z_TYPE_P(return_value) == IS_RESOURCE) {
PQsetNoticeProcessor(pgsql, _php_pgsql_notice_handler, (void*)Z_RESVAL_P(return_value));
}
#endif
to = (char *)PQescapeBytea((unsigned char*)from, from_len, &to_len);
- RETVAL_STRINGL(to, to_len-1, 1); /* to_len includes addtional '\0' */
+ RETVAL_STRINGL(to, to_len-1, 1); /* to_len includes additional '\0' */
PQfreemem(to);
}
/* }}} */
#else
MAKE_LONG_ZVAL_INCREF(stat_blocks,-1);
#endif
- /* Store numeric indexes in propper order */
+ /* Store numeric indexes in proper order */
zend_hash_next_index_insert(HASH_OF(return_value), (void *)&stat_dev, sizeof(zval *), NULL);
zend_hash_next_index_insert(HASH_OF(return_value), (void *)&stat_ino, sizeof(zval *), NULL);
zend_hash_next_index_insert(HASH_OF(return_value), (void *)&stat_mode, sizeof(zval *), NULL);
to communicate the deamon via SHM. PHP already had a shared memory
extension (sysvshm) written by Christian Cartus <cartus@atrior.de>,
unfortunately this extension was designed with PHP only in mind and
- offers high level features which are extremly bothersome for basic SHM
+ offers high level features which are extremely bothersome for basic SHM
we had in mind. After spending a day trying to reverse engineer and figure
out the format of sysvshm we decided that it would be much easier to
add our own extension to php for simple SHM operations, we were right :)).
/* }}} */
/* {{{ proto mixed snmprealwalk(string host, string community, mixed object_id [, int timeout [, int retries]])
- Return all objects including their respective object id withing the specified one */
+ Return all objects including their respective object id within the specified one */
PHP_FUNCTION(snmprealwalk)
{
php_snmp(INTERNAL_FUNCTION_PARAM_PASSTHRU, SNMP_CMD_WALK, SNMP_VERSION_1);
/* }}} */
/* {{{ proto bool snmp_set_quick_print(int quick_print)
- Return all objects including their respective object id withing the specified one */
+ Return all objects including their respective object id within the specified one */
PHP_FUNCTION(snmp_set_quick_print)
{
long a1;
/* }}} */
/* {{{ proto mixed snmp2_real_walk(string host, string community, mixed object_id [, int timeout [, int retries]])
- Return all objects including their respective object id withing the specified one */
+ Return all objects including their respective object id within the specified one */
PHP_FUNCTION(snmp2_real_walk)
{
php_snmp(INTERNAL_FUNCTION_PARAM_PASSTHRU, SNMP_CMD_WALK, SNMP_VERSION_2c);
/* }}} */
/* {{{ proto mixed SNMP::walk(mixed object_id [, bool $suffix_as_key = FALSE [, int $max_repetitions [, int $non_repeaters]])
- Return all objects including their respective object id withing the specified one as array of oid->value pairs */
+ Return all objects including their respective object id within the specified one as array of oid->value pairs */
PHP_METHOD(snmp, walk)
{
php_snmp(INTERNAL_FUNCTION_PARAM_PASSTHRU, SNMP_CMD_WALK, (-1));
void test(int);
void test(string);
maybe use the same alogrithim as ext/java.
-investigate further http keep_alive... inital testing proved slower.. maybe php_streams will speed things up..
+investigate further http keep_alive... initial testing proved slower.. maybe php_streams will speed things up..
provide schema 1999/2001 support....
through memory leak testing
possible using shared memory for sdl caching...
function _fetchEndpoints(&$soapclient, $test) {
$this->_getEndpoints($test, 1);
- // retreive endpoints from the endpoint server
+ // retrieve endpoints from the endpoint server
$endpointArray = $soapclient->__soapCall("GetEndpointInfo",array("groupName"=>$test),array('soapaction'=>"http://soapinterop.org/",'uri'=>"http://soapinterop.org/"));
if (is_soap_fault($endpointArray) || PEAR::isError($endpointArray)) {
if ($this->html) print "<pre>";
/**
* fetchEndpoints
- * retreive endpoints interop server
+ * retrieve endpoints interop server
*
* @return boolean result
* @access private
}
return NULL;
}
- // retreive all endpoints now
+ // retrieve all endpoints now
$this->currentTest = $test;
$x = $this->_getEndpoints($test);
return $x;
/**
* getEndpoints
- * retreive endpoints from either database or interop server
+ * retrieve endpoints from either database or interop server
*
* @param string base (see local var $tests)
* @param boolean all (if false, only get valid endpoints, status=1)
/**
* _getEndpoints
- * retreive endpoints from database
+ * retrieve endpoints from database
*
* @param string base (see local var $tests)
* @param boolean all (if false, only get valid endpoints, status=1)
/**
* getResults
- * retreive results from the database, stuff them into the endpoint array
+ * retrieve results from the database, stuff them into the endpoint array
*
* @access private
*/
// be sure we have the right endpoints for this test result
$this->getEndpoints($test);
- // retreive the results and put them into the endpoint info
+ // retrieve the results and put them into the endpoint info
$sql = "select * from results where class='$test' and type='$type' and wsdl=$wsdl";
$results = $this->dbc->getAll($sql,NULL, DB_FETCHMODE_ASSOC );
foreach ($results as $result) {
/**
* getResults
- * retreive results from the database, stuff them into the endpoint array
+ * retrieve results from the database, stuff them into the endpoint array
*
* @access private
*/
function getMethodList($test = 'base') {
- // retreive the results and put them into the endpoint info
+ // retrieve the results and put them into the endpoint info
$sql = "select distinct(function) from results where class='$test' order by function";
$results = $this->dbc->getAll($sql);
$ar = array();
<date>2002-07-07</date>
<state>alpha</state>
<notes>
- - First offical PEAR/PECL release
+ - First official PEAR/PECL release
</notes>
</release>
<filelist>
void *bindingAttributes; /* sdlSoapBindingPtr */
};
-/* Soap Binding Specfic stuff */
+/* Soap Binding Specific stuff */
struct _sdlSoapBinding {
sdlEncodingStyle style;
sdlTransport transport; /* not implemented yet */
/* {{{ proto void SoapClient::__setCookie(string name [, strung value])
Sets cookie thet will sent with SOAP request.
- The call to this function will effect all folowing calls of SOAP methods.
+ The call to this function will effect all following calls of SOAP methods.
If value is not specified cookie is removed. */
PHP_METHOD(SoapClient, __setCookie)
{
</element>\r
<element name="genres">\r
<annotation>\r
- <documentation xml:lang="en">Containes genre information where available for the program records. A program may have more than one genre with different relevence factors.</documentation>\r
+ <documentation xml:lang="en">Contains genre information where available for the program records. A program may have more than one genre with different relevance factors.</documentation>\r
</annotation>\r
<complexType>\r
<sequence maxOccurs="unbounded">\r
</element>\r
<element name="relevance" type="xsd:int">\r
<annotation>\r
- <documentation xml:lang="en">A relevence factor that applies to the genre classification for the program. A relevence factor of 1 indicates that this is the top-level genre under which the program is classified.</documentation>\r
+ <documentation xml:lang="en">A relevance factor that applies to the genre classification for the program. A relevance factor of 1 indicates that this is the top-level genre under which the program is classified.</documentation>\r
</annotation>\r
</element>\r
</sequence>\r
--TEST--
-Request #50698_2 (SoapClient should handle wsdls with some incompatiable endpoints -- EDGECASE: Large mix of compatiable and incompatiable endpoints.)
+Request #50698_2 (SoapClient should handle wsdls with some incompatiable endpoints -- EDGECASE: Large mix of compatible and incompatiable endpoints.)
--SKIPIF--
<?php require_once('skipif.inc'); ?>
--INI--
/** @return whether the current element has children
* @note The check whether the Iterator for the children can be created was
* already executed. Hence when flag CATCH_GET_CHILD was given in
- * constructor this fucntion returns false so that getChildren does
+ * constructor this function returns false so that getChildren does
* not try to access those children.
*/
function hasChildren()
*
* @param mode open mode
* @param use_include_path whether to search include paths (don't use)
- * @param context resource context to pased to open function
+ * @param context resource context to passed to open function
* @throw RuntimeException if file cannot be opened (e.g. insufficient
* access rights).
* @return The opened file as a SplFileObject instance
--TEST--
-Tries to create a SplFixedArray using the fromArray() function and a multi dimentional array.
+Tries to create a SplFixedArray using the fromArray() function and a multi dimensional array.
--CREDITS--
Philip Norton philipnorton42@gmail.com
--FILE--
$myA = new myClass();
$myB = new SplObjectStorage();
$myC = new myClass();
- $myC->member = $myA; // myC has a referece to myA
+ $myC->member = $myA; // myC has a reference to myA
$myB->Attach($myC); // myB attaches myC
$myA->member = $myB; // myA has myB, comleting the cycle
}
** shared locks begins at SHARED_FIRST.
**
** The same locking strategy and
-** byte ranges are used for Unix. This leaves open the possiblity of having
+** byte ranges are used for Unix. This leaves open the possibility of having
** clients on win95, winNT, and unix all talking to the same shared file
** and all locking correctly. To do so would require that samba (or whatever
** tool is being used for file sharing) implements locks correctly between
u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */
u8 orconf; /* OE_Rollback etc. */
Trigger *pTrig; /* The trigger that this step is a part of */
- Select *pSelect; /* SELECT statment or RHS of INSERT INTO .. SELECT ... */
+ Select *pSelect; /* SELECT statement or RHS of INSERT INTO .. SELECT ... */
Token target; /* Target table for DELETE, UPDATE, INSERT */
Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */
ExprList *pExprList; /* SET clause for UPDATE. */
**
*************************************************************************
**
-** This file contains definitions of global variables and contants.
+** This file contains definitions of global variables and constants.
*/
/* An array to map all upper-case characters into their corresponding
#endif
/*
-** Each auxilliary data pointer stored by a user defined function
+** Each auxiliary data pointer stored by a user defined function
** implementation calling sqlite3_set_auxdata() is stored in an instance
** of this structure. All such structures associated with a single VM
** are stored in a linked list headed at Vdbe.pAuxData. All are destroyed
** 1. All memory allocations sizes are rounded up to a power of 2.
**
** 2. If two adjacent free blocks are the halves of a larger block,
-** then the two blocks are coalesed into the single larger block.
+** then the two blocks are coalesced into the single larger block.
**
** 3. New memory is allocated from the first available free block.
**
/*
** The sqlite3_mutex.id, sqlite3_mutex.nRef, and sqlite3_mutex.owner fields
-** are necessary under two condidtions: (1) Debug builds and (2) using
+** are necessary under two conditions: (1) Debug builds and (2) using
** home-grown mutexes. Encapsulate these conditions into a single #define.
*/
#if defined(SQLITE_DEBUG) || defined(SQLITE_HOMEGROWN_RECURSIVE_MUTEX)
** occur.
**
** 2002-Feb-14: This routine is extended to remove MS-Access style
-** brackets from around identifers. For example: "[a-b-c]" becomes
+** brackets from around identifiers. For example: "[a-b-c]" becomes
** "a-b-c".
*/
SQLITE_PRIVATE int sqlite3Dequote(char *z){
/* store the result */
*pResult = result;
- /* return true if number and no extra non-whitespace chracters after */
+ /* return true if number and no extra non-whitespace characters after */
return z>=zEnd && nDigits>0 && eValid && nonNum==0;
#else
return !sqlite3Atoi64(z, pResult, length, enc);
}
/*
-** Attempt to add, substract, or multiply the 64-bit signed value iB against
+** Attempt to add, subtract, or multiply the 64-bit signed value iB against
** the other 64-bit signed integer at *pA and store the result in *pA.
** Return 0 on success. Or if the operation would have resulted in an
** overflow, leave *pA unchanged and return 1.
#endif
#if SQLITE_MAX_MMAP_SIZE>0
- /* Deal with as much of this read request as possible by transfering
+ /* Deal with as much of this read request as possible by transferring
** data from the memory mapping using memcpy(). */
if( offset<pFile->mmapSize ){
if( offset+amt <= pFile->mmapSize ){
#endif
#if SQLITE_MAX_MMAP_SIZE>0
- /* Deal with as much of this write request as possible by transfering
+ /* Deal with as much of this write request as possible by transferring
** data from the memory mapping using memcpy(). */
if( offset<pFile->mmapSize ){
if( offset+amt <= pFile->mmapSize ){
** looks at the filesystem type and tries to guess the best locking
** strategy from that.
**
-** For finder-funtion F, two objects are created:
+** For finder-function F, two objects are created:
**
** (1) The real finder-function named "FImpt()".
**
** setting the environment variable SQLITE_FORCE_PROXY_LOCKING to 1 will
** force proxy locking to be used for every database file opened, and 0
** will force automatic proxy locking to be disabled for all database
-** files (explicity calling the SQLITE_SET_LOCKPROXYFILE pragma or
+** files (explicitly calling the SQLITE_SET_LOCKPROXYFILE pragma or
** sqlite_file_control API is not affected by SQLITE_FORCE_PROXY_LOCKING).
*/
fprintf(stderr, "fchmod %o FAILED with %d %s\n",
cmode, code, strerror(code));
} else {
- fprintf(stderr, "fchmod %o SUCCEDED\n",cmode);
+ fprintf(stderr, "fchmod %o SUCCEEDED\n",cmode);
}
}else{
int code = errno;
pFile->h, pBuf, amt, offset, pFile->locktype));
#if SQLITE_MAX_MMAP_SIZE>0
- /* Deal with as much of this read request as possible by transfering
+ /* Deal with as much of this read request as possible by transferring
** data from the memory mapping using memcpy(). */
if( offset<pFile->mmapSize ){
if( offset+amt <= pFile->mmapSize ){
pFile->h, pBuf, amt, offset, pFile->locktype));
#if SQLITE_MAX_MMAP_SIZE>0
- /* Deal with as much of this write request as possible by transfering
+ /* Deal with as much of this write request as possible by transferring
** data from the memory mapping using memcpy(). */
if( offset<pFile->mmapSize ){
if( offset+amt <= pFile->mmapSize ){
#ifdef SQLITE_TEST
/*
** Count the number of fullsyncs and normal syncs. This is used to test
-** that syncs and fullsyncs are occuring at the right times.
+** that syncs and fullsyncs are occurring at the right times.
*/
SQLITE_API int sqlite3_sync_count = 0;
SQLITE_API int sqlite3_fullsync_count = 0;
** Check to see if element iRowid was inserted into the rowset as
** part of any insert batch prior to iBatch. Return 1 or 0.
**
-** If this is the first test of a new batch and if there exist entires
-** on pRowSet->pEntry, then sort those entires into the forest at
+** If this is the first test of a new batch and if there exist entries
+** on pRowSet->pEntry, then sort those entries into the forest at
** pRowSet->pForest so that they can be tested.
*/
SQLITE_PRIVATE int sqlite3RowSetTest(RowSet *pRowSet, u8 iBatch, sqlite3_int64 iRowid){
** Definition: Two databases (or the same database at two points it time)
** are said to be "logically equivalent" if they give the same answer to
** all queries. Note in particular the content of freelist leaf
-** pages can be changed arbitarily without effecting the logical equivalence
+** pages can be changed arbitrarily without effecting the logical equivalence
** of the database.
**
** (7) At any time, if any subset, including the empty set and the total set,
** outstanding transactions have been abandoned, the pager is able to
** transition back to OPEN state, discarding the contents of the
** page-cache and any other in-memory state at the same time. Everything
-** is reloaded from disk (and, if necessary, hot-journal rollback peformed)
+** is reloaded from disk (and, if necessary, hot-journal rollback performed)
** when a read-transaction is next opened on the pager (transitioning
** the pager into READER state). At that point the system has recovered
** from the error.
}
pPager->journalOff += (nMaster+20);
- /* If the pager is in peristent-journal mode, then the physical
+ /* If the pager is in persistent-journal mode, then the physical
** journal-file may extend past the end of the master-journal name
** and 8 bytes of magic data just written to the file. This is
** dangerous because the code to rollback a hot-journal file
/*
** This function is called whenever an IOERR or FULL error that requires
-** the pager to transition into the ERROR state may ahve occurred.
+** the pager to transition into the ERROR state may have occurred.
** The first argument is a pointer to the pager structure, the second
** the error-code about to be returned by a pager API function. The
** value returned is a copy of the second argument to this function.
}
/*
-** Change the size to which the WAL file is trucated on each reset.
+** Change the size to which the WAL file is truncated on each reset.
*/
SQLITE_PRIVATE void sqlite3WalLimit(Wal *pWal, i64 iLimit){
if( pWal ) pWal->mxWalSize = iLimit;
** compiler to crash when getCellInfo() is implemented as a macro.
** But there is a measureable speed advantage to using the macro on gcc
** (when less compiler optimizations like -Os or -O0 are used and the
-** compiler is not doing agressive inlining.) So we use a real function
+** compiler is not doing aggressive inlining.) So we use a real function
** for MSVC and a macro for everything else. Ticket #2457.
*/
#ifndef NDEBUG
/*
** Read part of the key associated with cursor pCur. Exactly
-** "amt" bytes will be transfered into pBuf[]. The transfer
+** "amt" bytes will be transferred into pBuf[]. The transfer
** begins at "offset".
**
** The caller must ensure that pCur is pointing to a valid row
/*
** Read part of the data associated with cursor pCur. Exactly
-** "amt" bytes will be transfered into pBuf[]. The transfer
+** "amt" bytes will be transferred into pBuf[]. The transfer
** begins at "offset".
**
** Return SQLITE_OK on success or an error code if anything goes
**
** This function may be called exact once on a each virtual machine.
** After this routine is called the VM has been "packaged" and is ready
-** to run. After this routine is called, futher calls to
+** to run. After this routine is called, further calls to
** sqlite3VdbeAddOp() functions are prohibited. This routine disconnects
** the Vdbe from the Parse object that helped generate it so that the
** the Vdbe becomes an independent entity and the Parse object can be
/* Allocate space for memory registers, SQL variables, VDBE cursors and
** an array to marshal SQL function arguments in.
*/
- zCsr = (u8*)&p->aOp[p->nOp]; /* Memory avaliable for allocation */
+ zCsr = (u8*)&p->aOp[p->nOp]; /* Memory available for allocation */
zEnd = (u8*)&p->aOp[pParse->nOpAlloc]; /* First byte past end of zCsr[] */
resolveP2Values(p, &nArg);
/* The complex case - There is a multi-file write-transaction active.
** This requires a master journal file to ensure the transaction is
- ** committed atomicly.
+ ** committed atomically.
*/
#ifndef SQLITE_OMIT_DISKIO
else{
** The following routines are used by user-defined functions to specify
** the function result.
**
-** The setStrOrError() funtion calls sqlite3VdbeMemSetStr() to store the
+** The setStrOrError() function calls sqlite3VdbeMemSetStr() to store the
** result as a string or blob but if the string or blob is too large, it
** then sets the error code to SQLITE_TOOBIG
*/
}
/*
-** Return the auxilary data pointer, if any, for the iArg'th argument to
+** Return the auxiliary data pointer, if any, for the iArg'th argument to
** the user-function defined by pCtx.
*/
SQLITE_API void *sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){
}
/*
-** Set the auxilary data pointer and delete function, for the iArg'th
+** Set the auxiliary data pointer and delete function, for the iArg'th
** argument to the user-function defined by pCtx. Any previous value is
** deleted by calling the delete function specified when it was set.
*/
/*
** Walk an expression tree. Invoke the callback once for each node
-** of the expression, while decending. (In other words, the callback
+** of the expression, while descending. (In other words, the callback
** is invoked before visiting children.)
**
** The return value from the callback should be one of the WRC_*
/*
** Resolve all names in all expressions of a SELECT and in all
-** decendents of the SELECT, including compounds off of p->pPrior,
+** descendants of the SELECT, including compounds off of p->pPrior,
** subqueries in expressions, and subqueries used as FROM clause
** terms.
**
** affinity of that column is returned. Otherwise, 0x00 is returned,
** indicating no affinity for the expression.
**
-** i.e. the WHERE clause expresssions in the following statements all
+** i.e. the WHERE clause expressions in the following statements all
** have an affinity:
**
** CREATE TABLE t1(a);
** Note that with flags==EXPRDUP_REDUCE, this routines works on full-size
** (unreduced) Expr objects as they or originally constructed by the parser.
** During expression analysis, extra information is computed and moved into
-** later parts of teh Expr object and that extra information might get chopped
+** later parts of the Expr object and that extra information might get chopped
** off if the expression is reduced. Note also that it does not work to
** make a EXPRDUP_REDUCE copy of a reduced expression. It is only legal
** to reduce a pristine expression tree from the parser. The implementation
** ALTER TABLE command. The first argument is the text of a CREATE TRIGGER
** statement. The second is a table name. The table name in the CREATE
** TRIGGER statement is replaced with the third argument and the result
-** returned. This is analagous to renameTableFunc() above, except for CREATE
+** returned. This is analogous to renameTableFunc() above, except for CREATE
** TRIGGER, not CREATE INDEX and CREATE TABLE.
*/
static void renameTriggerFunc(
/* Set nSum to the number of distinct (iCol+1) field prefixes that
** occur in the stat4 table for this index before pFinal. Set
** sumEq to the sum of the nEq values for column iCol for the same
- ** set (adding the value only once where there exist dupicate
+ ** set (adding the value only once where there exist duplicate
** prefixes). */
for(i=0; i<(pIdx->nSample-1); i++){
if( aSample[i].anDLt[iCol]!=aSample[i+1].anDLt[iCol] ){
}
#endif
#ifndef SQLITE_OMIT_FOREIGN_KEY
- /* Disallow the transfer optimization if the destination table constains
+ /* Disallow the transfer optimization if the destination table contains
** any foreign key constraints. This is more restrictive than necessary.
** But the main beneficiary of the transfer optimization is the VACUUM
** command, and the VACUUM command disables foreign key constraints. So
** entry point name "sqlite3_extension_init" was not found, then
** construct an entry point name "sqlite3_X_init" where the X is
** replaced by the lowercase value of every ASCII alphabetic
- ** character in the filename after the last "/" upto the first ".",
+ ** character in the filename after the last "/" up to the first ".",
** and eliding the first three characters if they are "lib".
** Examples:
**
int iQueue; /* The Queue table */
int iDistinct = 0; /* To ensure unique results if UNION */
int eDest = SRT_Table; /* How to write to Queue */
- SelectDest destQueue; /* SelectDest targetting the Queue table */
+ SelectDest destQueue; /* SelectDest targeting the Queue table */
int i; /* Loop counter */
int rc; /* Result code */
ExprList *pOrderBy; /* The ORDER BY clause */
/*
** Code an output subroutine for a coroutine implementation of a
-** SELECT statment.
+** SELECT statement.
**
** The data to be output is contained in pIn->iSdst. There are
** pIn->nSdst columns to be output. pDest is where the output should
pSubSrc = pSub->pSrc;
assert( pSubSrc );
/* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants,
- ** not arbitrary expresssions, we allowed some combining of LIMIT and OFFSET
+ ** not arbitrary expressions, we allowed some combining of LIMIT and OFFSET
** because they could be computed at compile-time. But when LIMIT and OFFSET
** became arbitrary expressions, we were forced to add restrictions (13)
** and (14). */
/*
** The select statement passed as the first argument is an aggregate query.
-** The second argment is the associated aggregate-info object. This
+** The second argument is the associated aggregate-info object. This
** function tests if the SELECT is of the form:
**
** SELECT count(*) FROM <tbl>
** without worrying about messing up the presistent representation
** of the view.
**
-** (3) Add terms to the WHERE clause to accomodate the NATURAL keyword
+** (3) Add terms to the WHERE clause to accommodate the NATURAL keyword
** on joins and the ON and USING clause of joins.
**
** (4) Scan the list of columns in the result set (pEList) looking
*/
if( pGroupBy ){
KeyInfo *pKeyInfo; /* Keying information for the group by clause */
- int j1; /* A-vs-B comparision jump */
+ int j1; /* A-vs-B comparison jump */
int addrOutputRow; /* Start of subroutine that outputs a result row */
int regOutputRow; /* Return address register for output subroutine */
int addrSetAbort; /* Set the abort flag and return */
}
/* Populate the array of registers beginning at regNew with the new
- ** row data. This array is used to check constaints, create the new
+ ** row data. This array is used to check constraints, create the new
** table and index records, and as the values for any new.* references
** made by triggers.
**
** step (3) requires additional temporary disk space approximately equal
** to the size of the original database for the rollback journal.
** Hence, temporary disk space that is approximately 2x the size of the
-** orginal database is required. Every page of the database is written
+** original database is required. Every page of the database is written
** approximately 3 times: Once for step (2) and twice for step (3).
** Two writes per page are required in step (3) because the original
** database content must be written into the rollback journal prior to
** 1. Then using those as a basis to compute the N best WherePath objects
** of length 2. And so forth until the length of WherePaths equals the
** number of nodes in the FROM clause. The best (lowest cost) WherePath
-** at the end is the choosen query plan.
+** at the end is the chosen query plan.
*/
struct WherePath {
Bitmask maskLoop; /* Bitmask of all WhereLoop objects in this path */
}
if( (chngToIN & getMask(&pWInfo->sMaskSet, pOrTerm->leftCursor))==0 ){
/* This term must be of the form t1.a==t2.b where t2 is in the
- ** chngToIN set but t1 is not. This term will be either preceeded
+ ** chngToIN set but t1 is not. This term will be either preceded
** or follwed by an inverted copy (t2.b==t1.a). Skip this term
** and use its inversion. */
testcase( pOrTerm->wtFlags & TERM_COPIED );
** number of rows that the index scan is expected to visit without
** considering the range constraints. If nEq is 0, this is the number of
** rows in the index. Assuming no error occurs, *pnOut is adjusted (reduced)
-** to account for the range contraints pLower and pUpper.
+** to account for the range constraints pLower and pUpper.
**
** In the absence of sqlite_stat4 ANALYZE data, or if such data cannot be
** used, each range inequality reduces the search space by a factor of 4.
** strict. With GROUP BY and DISTINCT the only requirement is that
** equivalent rows appear immediately adjacent to one another. GROUP BY
** and DISTINT do not require rows to appear in any particular order as long
-** as equivelent rows are grouped together. Thus for GROUP BY and DISTINCT
+** as equivalent rows are grouped together. Thus for GROUP BY and DISTINCT
** the pOrderBy terms can be matched in any order. With ORDER BY, the
** pOrderBy terms must be matched in strict left-to-right order.
*/
** a statement.
**
** (4) CREATE The keyword CREATE has been seen at the beginning of a
-** statement, possibly preceeded by EXPLAIN and/or followed by
+** statement, possibly preceded by EXPLAIN and/or followed by
** TEMP or TEMPORARY
**
** (5) TRIGGER We are in the middle of a trigger definition that must be
};
#else
/* If triggers are not supported by this compile then the statement machine
- ** used to detect the end of a statement is much simplier
+ ** used to detect the end of a statement is much simpler
*/
static const u8 trans[3][3] = {
/* Token: */
#endif
#ifdef SQLITE_TEST
- /* True to disable the incremental doclist optimization. This is controled
+ /* True to disable the incremental doclist optimization. This is controlled
** by special insert command 'test-no-incr-doclist'. */
int bNoIncrDoclist;
#endif
/*
** The Fts3Cursor.eSearch member is always set to one of the following.
-** Actualy, Fts3Cursor.eSearch can be greater than or equal to
+** Actually, Fts3Cursor.eSearch can be greater than or equal to
** FTS3_FULLTEXT_SEARCH. If so, then Fts3Cursor.eSearch - 2 is the index
** of the column to be searched. For example, in
**
**
** In these routine, the letters are in reverse order. So the 'y' rule
** is that 'y' is a consonant unless it is followed by another
-** consonent.
+** consonant.
*/
static int isVowel(const char*);
static int isConsonant(const char *z){
/*
** Return TRUE if the word ends with three letters which
-** are consonant-vowel-consonent and where the final consonant
+** are consonant-vowel-consonant and where the final consonant
** is not 'w', 'x', or 'y'.
**
** The word is reversed here. So we are really checking the
/*
** If the word ends with zFrom and xCond() is true for the stem
-** of the word that preceeds the zFrom ending, then change the
+** of the word that precedes the zFrom ending, then change the
** ending to zTo.
**
** The input word *pz and zFrom are both in reverse order. zTo
/*
** SQLite value pRowid contains the rowid of a row that may or may not be
** present in the FTS3 table. If it is, delete it and adjust the contents
-** of subsiduary data structures accordingly.
+** of subsidiary data structures accordingly.
*/
static int fts3DeleteByRowid(
Fts3Table *p,
}
/* If there is insufficient space allocated at StrBuffer.z, use realloc()
- ** to grow the buffer until so that it is big enough to accomadate the
+ ** to grow the buffer until so that it is big enough to accommodate the
** appended data.
*/
if( pStr->n+nAppend+1>=pStr->nAlloc ){
sCtx.iTerm = 0;
(void)fts3ExprIterate(pCsr->pExpr, fts3ExprTermOffsetInit, (void *)&sCtx);
- /* Retreive the text stored in column iCol. If an SQL NULL is stored
+ /* Retrieve the text stored in column iCol. If an SQL NULL is stored
** in column iCol, jump immediately to the next iteration of the loop.
** If an OOM occurs while retrieving the data (this can happen if SQLite
** needs to transform the data from utf-16 to utf-8), return SQLITE_NOMEM
continue;
}
}
- /* we need to do this everytime since GLOB_ONLYDIR does not guarantee that
+ /* we need to do this every time since GLOB_ONLYDIR does not guarantee that
* all directories will be filtered. GNU libc documentation states the
* following:
* If the information about the type of the file is easily available
-#039 0027 //artifical; there's no ' in HTML 4.01
+#039 0027 //artificial; there's no ' in HTML 4.01
nbsp 00A0
iexcl 00A1
cent 00A2
snprintf(markername, sizeof(markername), "APP%d", marker - M_APP0);
if (zend_hash_find(Z_ARRVAL_P(info), markername, strlen(markername)+1, (void **) &tmp) == FAILURE) {
- /* XXX we onyl catch the 1st tag of it's kind! */
+ /* XXX we only catch the 1st tag of it's kind! */
add_assoc_stringl(info, markername, buffer, length, 1);
}
case M_APP14:
case M_APP15:
if (info) {
- if (!php_read_APP(stream, marker, info TSRMLS_CC)) { /* read all the app markes... */
+ if (!php_read_APP(stream, marker, info TSRMLS_CC)) { /* read all the app marks... */
return result;
}
} else {
#define SCAN_MAX_ARGS 0xFF /* Maximum number of variable which can be */
- /* passed to (f|s)scanf. This is an artifical */
+ /* passed to (f|s)scanf. This is an artificial */
/* upper limit to keep resources in check and */
/* minimize the possibility of exploits */
0Xfff,
0XFA,
-0x80000000, // max negative integer as hexadecimal
- 0x7fffffff, // max postive integer as hexadecimal
- 0x7FFFFFFF, // max postive integer as hexadecimal
+ 0x7fffffff, // max positive integer as hexadecimal
+ 0x7FFFFFFF, // max positive integer as hexadecimal
0123, // integer as octal
01912, // should be quivalent to octal 1
-020000000000, // max negative integer as octal
0Xfff,
0XFA,
-0x80000000, // max negative integer as hexadecimal
- 0x7fffffff, // max postive integer as hexadecimal
- 0x7FFFFFFF, // max postive integer as hexadecimal
+ 0x7fffffff, // max positive integer as hexadecimal
+ 0x7FFFFFFF, // max positive integer as hexadecimal
0123, // integer as octal
01912, // should be quivalent to octal 1
-020000000000, // max negative integer as octal
xCurrent = XMLRPC_CreateValueEmpty();
}
- /* increment recursion depth guage */
+ /* increment recursion depth gauge */
depth ++;
/* safety first. must have a valid element */
array_init(return_value);
for (n = 0; n < globbuf.gl_pathc; n++) {
- /* we need to do this everytime since GLOB_ONLYDIR does not guarantee that
+ /* we need to do this every time since GLOB_ONLYDIR does not guarantee that
* all directories will be filtered. GNU libc documentation states the
* following:
* If the information about the type of the file is easily available
if (zend_hash_find(HASH_OF(filterparams), "level", sizeof("level"), (void**) &tmpzval) == SUCCESS) {
tmp = **tmpzval;
- /* Psuedo pass through to catch level validating code */
+ /* Pseudo pass through to catch level validating code */
goto factory_setlevel;
}
break;
Rules for building ZLIB
-----------------------
-The zlib project requires the folowing files:
+The zlib project requires the following files:
php_build\zlib\include\zlib.h
php_build\zlib\include\zconf.h
/* all remaining arguments are part of the query string
* this section of code concatenates all remaining arguments
- * into a single string, seperating args with a &
+ * into a single string, separating args with a &
* this allows command lines like:
*
* test.php v1=test v2=hello+world!
/* Here we call the headers_complete callback. This is somewhat
* different than other callbacks because if the user returns 1, we
* will interpret that as saying that this message has no body. This
- * is needed for the annoying case of recieving a response to a HEAD
+ * is needed for the annoying case of receiving a response to a HEAD
* request.
*/
if (settings->on_headers_complete) {
#ifndef HAVE_SETPROCTITLE
#ifdef __linux__
/*
- * This piece of code has been inspirated from nginx and pureftpd code, whic
+ * This piece of code has been inspirated from nginx and pureftpd code, which
* are under BSD licence.
*
* To change the process title in Linux we have to set argv[1] to NULL
}
if ( abs( g_prefork_server->m_iCurChildren - count ) > 1 )
{
- fprintf( stderr, "Children tracking is wrong: PID: %d, Cur Childen: %d, count: %d, idle: %d, dying: %d\n", getpid(),
+ fprintf( stderr, "Children tracking is wrong: PID: %d, Cur Children: %d, count: %d, idle: %d, dying: %d\n", getpid(),
g_prefork_server->m_iCurChildren, count, idle, dying );
}
Configuration of your Netscape/iPlanet/Sun Webserver for PHP5
-----------------------------------------------------------------
-These instructions are targetted at Netscape Enterprise Web Server and
+These instructions are targeted at Netscape Enterprise Web Server and
SUN/Netscape Alliance iPlanet Web Server and the new Sun Java System Webserver.
On other web servers your milage may vary.
#ifdef _WIN32
} __except(phpdbg_exception_handler_win32(xp = GetExceptionInformation())) {
- phpdbg_error("segfault", "", "Access violation (Segementation fault) encountered\ntrying to abort cleanly...");
+ phpdbg_error("segfault", "", "Access violation (Segmentation fault) encountered\ntrying to abort cleanly...");
}
#endif
- internal: has value "internal" when being an internal function call (one cannot inspect that frame)
- being an error: (by type)
- - maxnum: tried to access a frame with a number heigher than existing (or < 0)
+ - maxnum: tried to access a frame with a number higher than existing (or < 0)
### attributes on <arg> ###
- command executing and compiling a given file
- <exec type="unset" context="" />: indicates unsetting of the old context
- <exec type="unsetops" />: indicates unsetting of the old compiled opcodes
- - <exec type="unchanged" />: same execution context choosen again
+ - <exec type="unchanged" />: same execution context chosen again
- <exec type="set" context="" />: indicates setting of the new context
- errors by tag
- <compile>
### breaks ###
-- generally enables / disables breakpoint functionality silently with no futher xml answer
+- generally enables / disables breakpoint functionality silently with no further xml answer
- if the boolean switch is omitted, it emits current state in a <setbreaks active="" /> where active is on or off
### color ###
@@ -1519,7 +1697,7 @@
if ( c->bytes_sent >= c->bytes_to_send )
{
- /* This conection is finished! */
+ /* This connection is finished! */
- clear_connection( c, tvP );
+ clear_connection( c, tvP, 1 );
return;
if ($just_save_results || strlen(trim($user_input)) == 0 || strtolower($user_input[0]) == 'y') {
/*
* Collect information about the host system for our report
- * Fetch phpinfo() output so that we can see the PHP enviroment
+ * Fetch phpinfo() output so that we can see the PHP environment
* Make an archive of all the failed tests
* Send an email
*/
projects / php / commitdiff