#-------------------------------------------------------------------------
#
-# Makefile.inc--
-# Build and install postgres.
+# GNUMakefile.in--
+# Build and install psqlodbc (Postgres ODBC driver).
#
# Copyright (c) 1994, Regents of the University of California
#
#
# IDENTIFICATION
-# $Header: /cvsroot/pgsql/src/interfaces/odbc/Attic/GNUmakefile.in,v 1.2 1998/10/07 06:49:19 thomas Exp $
+# $Header: /cvsroot/pgsql/src/interfaces/odbc/Attic/GNUmakefile.in,v 1.3 1998/10/09 07:04:49 thomas Exp $
#
#-------------------------------------------------------------------------
@SET_MAKE@
endif
endif
-SOURCES = *.c *.h *.in Config.mk Makefile Makefile.unx README.Linux \
+SOURCES = *.c *.h *.in Config.mk \
TODO.txt Version.mk config.guess config.sub configure \
- install-sh license.txt notice.txt odbcinst.ini patch \
- psqlodbc.aps psqlodbc.def psqlodbc.mak psqlodbc.mdp \
- psqlodbc.ncb psqlodbc.rc readme.txt
+ install-sh license.txt notice.txt odbcinst.ini \
+ psqlodbc.def \
+ psqlodbc.rc readme.txt
OBJECTS = info.o bind.o columninfo.o connection.o convert.o drvconn.o \
environ.o execute.o lobj.o misc.o options.o \
cd $(DESTDIR)$(LIBDIR) && $(LN_S) -f lib$(NAME)$(DLSUFFIX).$(SO_MAJOR_VERSION) lib$(NAME)$(DLSUFFIX)
install-ini: odbcinst.ini
- $(INSTALL) $(INSTL_LIB_OPTS) odbcinst.ini $(ODBCINST)/odbcinst.ini
+ $(INSTALL) $(INSTL_LIB_OPTS) odbcinst.ini $(ODBCINST)
depend dep:
$(CC) -MM *.c >depend
clean:
-rm -f lib$(NAME).a $(shlib) $(OBJECTS) lib$(NAME)$(DLSUFFIX)
- -rm -f config.log config.cache config.status
-
+
.PHONY: distclean
distclean: clean
-rm -f config.h GNUmakefile Makefile.global
+ -rm -f config.cache config.log config.status
+ @if [ $SRCDIR ne $ODBCSRCDIR ]; then rm -f template makefiles port
.PHONY: standalone
standalone:
+ @if test "$SRCDIR" = "$ODBCSRCDIR"; then \
+ echo "****************************************************"; \
+ echo "Note: This was a standalone installation already"; \
+ echo "This may produce a slightly inconsistant tar file..."; \
+ echo "You should use the original tar file instead"; \
+ echo "****************************************************"; \
+ fi
-rm -f psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION).tar.gz
- tar -cf psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION).tar $(SOURCES)
- tar -r -C ../.. -f psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION).tar template
+ $(TAR) -chf psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION).tar \
+ $(SOURCES) -C @top_srcdir@ makefiles template
gzip psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION).tar
.PHONY: integrated
integrated:
-rm -f psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION)-int.tar.gz
- tar -cf psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION)-int.tar $(SOURCES)
+ $(TAR) -cf psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION)-int.tar $(SOURCES)
gzip psqlodbc-$(SO_MAJOR_VERSION)$(SO_MINOR_VERSION)-int.tar
#----------------------------------------------------------------------------
#
# Makefile.global--
-# global configuration for the Makefiles
+# global configuration for pgsqlodbc (Postgres ODBC driver)
#
# Copyright (c) 1994, Regents of the University of California
#
#
# IDENTIFICATION
-# $Header: /cvsroot/pgsql/src/interfaces/odbc/Attic/Makefile.global.in,v 1.1 1998/10/06 05:57:56 thomas Exp $
+# $Header: /cvsroot/pgsql/src/interfaces/odbc/Attic/Makefile.global.in,v 1.2 1998/10/09 07:04:50 thomas Exp $
#
# NOTES
# This is derived from the main Postgres makefile.
LIBDIR= $(POSTGRESDIR)/lib
-# Where the man pages (suitable for use with "man") get installed.
-POSTMANDIR= $(POSTGRESDIR)/man
-
+## Where the man pages (suitable for use with "man") get installed.
+#POSTMANDIR= $(POSTGRESDIR)/man
+#
# Where the formatted documents (e.g., the reference manual) get installed.
-POSTDOCDIR= $(POSTGRESDIR)/doc
+#POSTDOCDIR= $(POSTGRESDIR)/doc
# Where the header files necessary to build frontend programs get installed.
HEADERDIR= $(POSTGRESDIR)/include
# Where the odbcinst.ini file will be placed
-ODBCINST= $(POSTGRESDIR)@ODBCINSTDIR@
+ODBCINST= @ODBCINST@
##############################################################################
#
BACKSLASH_C= @BACKSLASH_C@
-
#-------------------------------------------------------------
# See the subdirectory template for default settings for these
#-------------------------------------------------------------
DLSUFFIX= @DLSUFFIX@
LN_S = @LN_S@
+ifneq ($(wildcard $(SRCDIR)/Makefile.port), )
+ include $(SRCDIR)/Makefile.port
+endif
+
+
##############################################################################
#
# Customization.
#
-# This includes local customizations. If we're being build from
+# This includes local customizations. If we're being built from
# within the Postgres distribution and a Makefile.custom exists
-# in the top level Postgres directory it overrides any local customization
-# that might be in Makefile.custom of the odbc driver directory. These
-# files don't exist in the original
-# distribution so that they don't get overwritten when you upgrade.
+# in the top level Postgres directory it will take precedence
+# over any local Makefile.custom in the odbc driver directory.
ifneq ($(wildcard $(SRCDIR)/Makefile.custom), )
-include $(SRCDIR)/Makefile.custom
+ include $(SRCDIR)/Makefile.custom
endif
-ifneq ($(wildcard ../../Makefile.custom), )
-include ../../Makefile.custom
-endif
# This goes here so that customization in Makefile.custom is effective
##############################################################################
ifneq ($(CUSTOM_INSTALL),)
-INSTALL= $(CUSTOM_INSTALL)
+ INSTALL= $(CUSTOM_INSTALL)
endif
#
endif
ifeq ($(CC), gcc)
-CFLAGS+= -Wall -Wmissing-prototypes
+ CFLAGS+= -Wall -Wmissing-prototypes
endif
ifdef COPT
- CFLAGS+= $(COPT)
+ CFLAGS+= $(COPT)
endif
ac_default_prefix=/usr/local
ac_help="$ac_help
--with-template=TEMPLATE
- use operating system template file
- see template directory"
+ use operating system template file; see template directory"
ac_help="$ac_help
- --with-odbcinst=<datadir> change default directory for odbcinst.ini"
+ --with-odbcinst=<pathname>
+ change default directory for odbcinst.ini "
# Initialize some variables set by options.
# The variables have the same names as the options, with
+echo "*** configuring psqlodbc ***"
+
if test -d ../../interfaces
then
- TEMPLATEDIR=../../template
- if test "$prefix" = "NONE"
- then
- ac_default_prefix=/usr/local/pgsql
- fi
- ODBCINSTDIR=
-else
- TEMPLATEDIR=./template
- if test "$prefix" = "NONE"
+ echo "psqlodbc can be configured either standalone or integrated"
+ echo "into the Postgres main distribution."
+ echo "It appears that you are running the standalone configure"
+ echo "from within the main distribution. The recommended (and required)"
+ echo "procedure is to configure ODBC using the integrated configuration"
+ echo "procedure using the --with-odbc option."
+ exit
+fi
+
+TEMPLATEDIR=./template
+if test "$prefix" = "NONE"
+then
+ if test -d "/share"
then
- ODBCINSTDIR=/share
+ ODBCINST=/share/odbcinst.ini
else
- ODBCINSTDIR=
+ ODBCINST=/etc/odbcinst.ini
fi
+else
+ ODBCINST=$prefix/odbcinst.ini
fi
-echo "*** configuring psqlodbc ***"
-
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:577: checking host system type" >&5
+echo "configure:583: checking host system type" >&5
host_alias=$host
case "$host_alias" in
PORTNAME=${os}
-
echo "checking echo setting..."
if echo '\c' | grep -s c >/dev/null 2>&1
then
echo $ac_n "checking setting template to""... $ac_c" 1>&6
-echo "configure:656: checking setting template to" >&5
+echo "configure:661: checking setting template to" >&5
# Check whether --with-template or --without-template was given.
if test "${with_template+set}" = set; then
withval="$with_template"
again.
If neither of these is the case than please complain
-kindly to the maintainers, their e-mail addresses can
+kindly to the maintainers; their e-mail addresses can
be found in the Readme files.
*************************************************************
EOT
echo "- setting LDFLAGS=$LDFLAGS"
echo $ac_n "checking setting ODBCINST""... $ac_c" 1>&6
-echo "configure:768: checking setting ODBCINST" >&5
+echo "configure:773: checking setting ODBCINST" >&5
# Check whether --with-odbcinst or --without-odbcinst was given.
if test "${with_odbcinst+set}" = set; then
withval="$with_odbcinst"
echo "$ac_t""$with_odbcinst" 1>&6
else
cat >> confdefs.h <<EOF
-#define ODBCINST ${ODBCINSTDIR}
+#define ODBCINST /etc/odbcinst.ini
EOF
- echo "$ac_t""${ODBCINSTDIR}" 1>&6
+ echo "$ac_t""${ODBCINST}" 1>&6
fi
-if test "X$with_odbcinst" != "X"
-then
- ODBCINSTDIR=$with_odbcinst
-fi
-
if test "X$with_compiler" != "X"
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
-s%@PORTNAME@%$PORTNAME%g
-s%@ODBCINSTDIR@%$ODBCINSTDIR%g
+s%@ODBCINST@%$ODBCINST%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
+s%@PORTNAME@%$PORTNAME%g
s%@AROPT@%$AROPT%g
s%@SHARED_LIB@%$SHARED_LIB%g
s%@DLSUFFIX@%$DLSUFFIX%g
fi
fi; done
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+ac_sources="makefiles/Makefile.${os}"
+ac_dests="Makefile.port"
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+srcdir=$ac_given_srcdir
+while test -n "$ac_sources"; do
+ set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+ set $ac_sources; ac_source=$1; shift; ac_sources=$*
+
+ echo "linking $srcdir/$ac_source to $ac_dest"
+
+ if test ! -r $srcdir/$ac_source; then
+ { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; }
+ fi
+ rm -f $ac_dest
+
+ # Make relative symlinks.
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then
+ # The dest file is in a subdirectory.
+ test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir"
+ ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dest_dir_suffix.
+ ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dest_dir_suffix= ac_dots=
+ fi
+
+ case "$srcdir" in
+ [/$]*) ac_rel_source="$srcdir/$ac_source" ;;
+ *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;;
+ esac
+
+ # Make a symlink if possible; otherwise try a hard link.
+ if ln -s $ac_rel_source $ac_dest 2>/dev/null ||
+ ln $srcdir/$ac_source $ac_dest; then :
+ else
+ { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
+ fi
+done
EOF
cat >> $CONFIG_STATUS <<EOF
+dnl psqlodbc standalone configuration.
dnl Process this file with autoconf to produce a configure script.
+
+dnl Confirm that this is being run from the ODBC source directory,
+dnl and halt if not...
AC_INIT(bind.c)
AC_PREFIX_DEFAULT(/usr/local)
+echo "*** configuring psqlodbc ***"
+
if test -d ../../interfaces
then
- TEMPLATEDIR=../../template
- if test "$prefix" = "NONE"
- then
- ac_default_prefix=/usr/local/pgsql
- fi
- ODBCINSTDIR=
-else
- TEMPLATEDIR=./template
- if test "$prefix" = "NONE"
+ echo "psqlodbc can be configured either standalone or integrated"
+ echo "into the Postgres main distribution."
+ echo "It appears that you are running the standalone configure"
+ echo "from within the main distribution. The recommended (and required)"
+ echo "procedure is to configure ODBC using the integrated configuration"
+ echo "procedure using the --with-odbc option."
+ exit
+fi
+
+TEMPLATEDIR=./template
+if test "$prefix" = "NONE"
+then
+ if test -d "/share"
then
- ODBCINSTDIR=/share
+ ODBCINST=/share/odbcinst.ini
else
- ODBCINSTDIR=
+ ODBCINST=/etc/odbcinst.ini
fi
+else
+ ODBCINST=$prefix/odbcinst.ini
fi
-echo "*** configuring psqlodbc ***"
-
AC_CANONICAL_HOST
case "$host_os" in
PORTNAME=${os}
-
-AC_SUBST(PORTNAME)
+AC_LINK_FILES(makefiles/Makefile.${os}, Makefile.port)
echo "checking echo setting..."
if echo '\c' | grep -s c >/dev/null 2>&1
AC_MSG_CHECKING(setting template to)
AC_ARG_WITH(template,
[ --with-template=TEMPLATE
- use operating system template file
- see template directory],
+ use operating system template file; see template directory],
[ TEMPLATE=$withval ],
[ host_no_ver=`echo "$host" | sed 's/[[0-9.]]*$//'`
GUESS=`grep "$host_no_ver" $TEMPLATEDIR/.similar | sed 's/.*=//' | tail -1`
again.
If neither of these is the case than please complain
-kindly to the maintainers, their e-mail addresses can
+kindly to the maintainers; their e-mail addresses can
be found in the Readme files.
*************************************************************
EOT
dnl being compiled inside the postgres distribution.
AC_MSG_CHECKING(setting ODBCINST)
AC_ARG_WITH(
- odbcinst,
- [ --with-odbcinst=<datadir> change default directory for odbcinst.ini],
+ odbcinst,
+ [ --with-odbcinst=<pathname>
+ change default directory for odbcinst.ini ],
AC_DEFINE_UNQUOTED(ODBCINST, ${with_odbcinst}) AC_MSG_RESULT($with_odbcinst),
- AC_DEFINE_UNQUOTED(ODBCINST, ${ODBCINSTDIR}) AC_MSG_RESULT(${ODBCINSTDIR})
+ AC_DEFINE_UNQUOTED(ODBCINST, /etc/odbcinst.ini) AC_MSG_RESULT(${ODBCINST})
)
-if test "X$with_odbcinst" != "X"
-then
- ODBCINSTDIR=$with_odbcinst
-fi
-
-AC_SUBST(ODBCINSTDIR)
+AC_SUBST(ODBCINST)
if test "X$with_compiler" != "X"
then