* Clients as [command execution bridge](10-icinga2-client.md#icinga2-client-configuration-command-bridge) without local configuration
* Clients receive their configuration from the master ([Cluster config sync](10-icinga2-client.md#icinga2-client-configuration-master-config-sync))
+Keep the [naming convention](13-distributed-monitoring-ha.md#cluster-naming-convention) for nodes in mind.
+
+> **Tip**
+>
+> If you're looking for troubleshooting clients problems, check the general
+> [cluster troubleshooting](17-troubleshooting.md#troubleshooting-cluster) section.
+
### <a id="icinga2-client-configuration-combined-scenarios"></a> Combined Client Scenarios
If your setup consists of remote clients with local configuration but also command execution bridges
### <a id="icinga2-client-installation-firewall"></a> Configure the Firewall
Icinga 2 master, satellite and client instances communicate using the default tcp
-port `5665`. The communication is bi-directional and the first node opening the
-connection "wins" if there are both connection ways enabled in your firewall policies.
+port `5665`.
+
+Communication between zones requires one of these connection directions:
+
+* The parent zone nodes are able to connect to the child zone nodes (`parent => child`).
+* The child zone nodes are able to connect to the parent zone nodes (`parent <= child`).
+* Both connnection directions work.
If you are going to use CSR-Autosigning, you must (temporarly) allow the client
connecting to the master instance and open the firewall port. Once the client install is done,
you can close the port and use a different communication direction (master-to-client).
+In case of a [multiple hierarchy setup](13-distributed-monitoring-ha.md#cluster-scenarios-master-satellite-clients)
+(master, satellite, client) you will need to manually deploy your [client certificates](11-icinga2-client.md#certificates-manual-creation)
+and zone configuration.
+
### <a id="icinga2-client-installation-master-setup"></a> Setup the Master for Remote Clients
If you are planning to use the [remote Icinga 2 clients](10-icinga2-client.md#icinga2-client)
The [setup wizard for the master setup](10-icinga2-client.md#icinga2-client-installation-master-setup) will create
one for you already.
- # grep TicketSalt /etc/icinga2/constants.conf
+> **Note**
+>
+> **Never** expose the ticket salt to your clients. This is the master's private key
+> and must remain on the master providing the CSR Auto-Signing functionality for security reasons.
The client setup wizard will ask you to generate a valid ticket number using its CN.
If you already know your remote client's Common Names (CNs) - usually the FQDN - you
# icinga2 pki ticket --cn icinga2-node2.localdomain
-> **Note**
->
-> You can omit the `--salt` parameter using the `TicketSalt` constant from
-> [constants.conf](4-configuring-icinga-2.md#constants-conf) if already defined and Icinga 2 was
-> reloaded after the master setup.
-
### <a id="certificates-manual-creation"></a> Manual SSL Certificate Generation
This is described separately in the [cluster setup chapter](12-distributed-monitoring-ha.md#manual-certificate-generation).
Before you start deploying, keep the following things in mind:
-* Your [SSL CA and certificates](12-distributed-monitoring-ha.md#manual-certificate-generation) are mandatory for secure communication
-* Get pen and paper or a drawing board and design your nodes and zones!
- * all nodes in a cluster zone are providing high availability functionality and trust each other
- * cluster zones can be built in a Top-Down-design where the child trusts the parent
- * communication between zones happens bi-directional which means that a DMZ-located node can still reach the master node, or vice versa
-* Update firewall rules and ACLs
-* Decide whether to use the built-in [configuration syncronization](12-distributed-monitoring-ha.md#cluster-zone-config-sync) or use an external tool (Puppet, Ansible, Chef, Salt, etc) to manage the configuration deployment
+Your [SSL CA and certificates](13-distributed-monitoring-ha.md#manual-certificate-generation) are mandatory for secure communication.
+
+Communication between zones requires one of these connection directions:
+
+* The parent zone nodes are able to connect to the child zone nodes (`parent => child`).
+* The child zone nodes are able to connect to the parent zone nodes (`parent <= child`).
+* Both connnection directions work.
+
+Update firewall rules and ACLs.
+
+* Icinga 2 master, satellite and client instances communicate using the default tcp port `5665`.
+
+Get pen and paper or a drawing board and design your nodes and zones!
+
+* Keep the [naming convention](13-distributed-monitoring-ha.md#cluster-naming-convention) for nodes in mind.
+* All nodes (endpoints) in a cluster zone provide high availability functionality and trust each other.
+* Cluster zones can be built in a Top-Down-design where the child trusts the parent.
+
+Decide whether to use the built-in [configuration syncronization](13-distributed-monitoring-ha.md#cluster-zone-config-sync) or use an external tool (Puppet, Ansible, Chef, Salt, etc) to manage the configuration deployment.
> **Tip**
use wildcard certificates. The common name (CN) is mandatory for the cluster communication and
therefore must be unique for each connecting instance.
-##
# <a id="cluster-naming-convention"></a> Cluster Naming Convention
+## <a id="cluster-naming-convention"></a> Cluster Naming Convention
The SSL certificate common name (CN) will be used by the [ApiListener](6-object-types.md#objecttype-apilistener)
object to determine the local authority. This name must match the local [Endpoint](6-object-types.md#objecttype-endpoint)
object name.
-Example:
+Certificate generation for host with the FQDN `icinga2a`:
# icinga2 pki new-cert --cn icinga2a --key icinga2a.key --csr icinga2a.csr
# icinga2 pki sign-csr --csr icinga2a.csr --cert icinga2a.crt
+Add a new `Endpoint` object named `icinga2a`:
+
# vim zones.conf
object Endpoint "icinga2a" {
const NodeName = "icinga2a"
+If you're using the host's FQDN everywhere, you're on the safe side. The setup wizards
+will do the very same.
## <a id="cluster-configuration"></a> Cluster Configuration
* Combine that with command execution brdiges on remote clients and also satellites
-
-
### <a id="cluster-scenarios-security"></a> Security in Cluster Scenarios
While there are certain capabilities to ensure the safe communication between all
* The `icinga2.log` log file in `/var/log/icinga2` will indicate whether this ApiListener
[accepts config](12-distributed-monitoring-ha.md#zone-config-sync-permissions), or not.
+### <a id="troubleshooting-cluster-replay-log"></a> Cluster Troubleshooting Overdue Check Results
+
+If your master does not receive check results (or any other events) from the child zones
+(satellite, clients, etc) make sure to check whether the client sending in events
+is allowed to do so.
+
+The [cluster naming convention](13-distributed-monitoring-ha.md#cluster-naming-convention)
+applies so if there's a mismatch between your client node's endpoint name and its provided
+certificate's CN, the master will deny all events.
+
+> **Tip**
+>
+> [Icinga Web 2](2-getting-started.md#setting-up-the-user-interface) provides a dashboard view
+> for overdue check results.
+
+Enable the [debug log](17-troubleshooting.md#troubleshooting-enable-debug-output) on the master
+for more verbose insights.
+
+If the client cannot authenticate, it's a more general [problem](17-troubleshooting.md#troubleshooting-cluster-unauthenticated-clients).
+
+The client's endpoint is not configured on nor trusted by the master node:
+
+ Discarding 'check result' message from 'icinga2b': Invalid endpoint origin (client not allowed).
+
+The check result message sent by the client does not belong to the zone the checkable object is
+in on the master:
+
+ Discarding 'check result' message from 'icinga2b': Unauthorized access.
+
+
### <a id="troubleshooting-cluster-replay-log"></a> Cluster Troubleshooting Replay Log
If your `/var/lib/icinga2/api/log` directory grows, it generally means that your cluster
-cannot replay the log on connection loss and re-establishment.
+cannot replay the log on connection loss and re-establishment. A master node for example
+will store all events for not connected endpoints in the same and child zones.
Check the following:
# <a id="getting-started"></a> Getting Started
-This tutorial is a step-by-step introduction to installing Icinga 2 and
-Icinga Web 2. It assumes that you are familiar with the operating system
-you're using to install Icinga 2.
+This tutorial is a step-by-step introduction to installing [Icinga 2](2-getting-started.md#setting-up-icinga2)
+and [Icinga Web 2](2-getting-started.md#setting-up-the-user-interface).
+It assumes that you are familiar with the operating system you're using to install Icinga 2.
## <a id="setting-up-icinga2"></a> Setting up Icinga 2
projects / icinga2 / commitdiff