For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.
1521668179@sss.pgh.pa.us
# AIX case
-# There is no correct way to write a rule that generates two files.
-# Rules with two targets don't have that meaning, they are merely
-# shorthand for two otherwise separate rules. To be safe for parallel
-# make, we must chain the dependencies like this. The semicolon is
-# important, otherwise make will choose some built-in rule.
-
-$(stlib): $(shlib) ;
+# See notes in src/backend/parser/Makefile about the following two rules
+$(stlib): $(shlib)
+ touch $@
$(shlib): $(OBJS) | $(SHLIB_PREREQS)
rm -f $(stlib)
# Win32 case
-# There is no correct way to write a rule that generates two files.
-# Rules with two targets don't have that meaning, they are merely
-# shorthand for two otherwise separate rules. To be safe for parallel
-# make, we must chain the dependencies like this. The semicolon is
-# important, otherwise make will choose some built-in rule.
-
-$(stlib): $(shlib) ;
+# See notes in src/backend/parser/Makefile about the following two rules
+$(stlib): $(shlib)
+ touch $@
# XXX A backend that loads a module linked with libgcc_s_dw2-1.dll will exit
# uncleanly, hence -static-libgcc. (Last verified with MinGW-w64 compilers
postgres: $(OBJS)
$(CC) $(CFLAGS) $(LDFLAGS) $(LDFLAGS_EX) $(export_dynamic) -Wl,--stack,$(WIN32_STACK_RLIMIT) -Wl,--export-all-symbols -Wl,--out-implib=libpostgres.a $(call expand_subsys,$^) $(LIBS) -o $@
-# There is no correct way to write a rule that generates two files.
-# Rules with two targets don't have that meaning, they are merely
-# shorthand for two otherwise separate rules. To be safe for parallel
-# make, we must chain the dependencies like this. The semicolon is
-# important, otherwise make will choose some built-in rule.
-
-libpostgres.a: postgres ;
+# libpostgres.a is actually built in the preceding rule, but we need this to
+# ensure it's newer than postgres; see notes in src/backend/parser/Makefile
+libpostgres.a: postgres
+ touch $@
endif # cygwin
postgres: $(OBJS) $(WIN32RES)
$(CC) $(CFLAGS) $(LDFLAGS) $(LDFLAGS_EX) -Wl,--stack=$(WIN32_STACK_RLIMIT) -Wl,--export-all-symbols -Wl,--out-implib=libpostgres.a $(call expand_subsys,$(OBJS)) $(WIN32RES) $(LIBS) -o $@$(X)
-libpostgres.a: postgres ;
+# libpostgres.a is actually built in the preceding rule, but we need this to
+# ensure it's newer than postgres; see notes in src/backend/parser/Makefile
+libpostgres.a: postgres
+ touch $@
endif # win32
# The following targets are specified in make commands that appear in
# the make files in our subdirectories. Note that it's important we
# match the dependencies shown in the subdirectory makefiles!
+# Also, in cases where a subdirectory makefile generates two files in
+# what's really one step, such as bison producing both gram.h and gram.c,
+# we must request making the one that is shown as the secondary (dependent)
+# output, else the timestamp on it might be wrong. By project convention,
+# the .h file is the dependent one for bison output, so we need only request
+# that; but in other cases, request both for safety.
parser/gram.h: parser/gram.y
$(MAKE) -C parser gram.h
include $(top_srcdir)/src/backend/common.mk
-all: $(BKIFILES) schemapg.h
+all: $(BKIFILES) schemapg.h postgres.description postgres.shdescription
# Note: there are some undocumented dependencies on the ordering in which
# the catalog header files are assembled into postgres.bki. In particular,
# locations of headers that genbki.pl needs to read
pg_includes = -I$(top_srcdir)/src/include/catalog -I$(top_builddir)/src/include/catalog
-# see explanation in ../parser/Makefile
-postgres.description: postgres.bki ;
+# see notes in src/backend/parser/Makefile about multiple output files
+postgres.description: postgres.bki
+ touch $@
-postgres.shdescription: postgres.bki ;
+postgres.shdescription: postgres.bki
+ touch $@
-schemapg.h: postgres.bki ;
+schemapg.h: postgres.bki
+ touch $@
# Technically, this should depend on Makefile.global, but then
# postgres.bki would need to be rebuilt after every configure run,
# There is no correct way to write a rule that generates two files.
# Rules with two targets don't have that meaning, they are merely
-# shorthand for two otherwise separate rules. To be safe for parallel
-# make, we must chain the dependencies like this. The semicolon is
-# important, otherwise make will choose the built-in rule for
-# gram.y=>gram.c.
-
-gram.h: gram.c ;
+# shorthand for two otherwise separate rules. If we have an action
+# that in fact generates two or more files, we must choose one of them
+# as primary and show it as the action's output, then make all of the
+# other output files dependent on the primary, like this. Furthermore,
+# the "touch" action is essential, because it ensures that gram.h is
+# marked as newer than (or at least no older than) gram.c. Without that,
+# make is likely to try to rebuild gram.h in subsequent runs, which causes
+# failures in VPATH builds from tarballs.
+
+gram.h: gram.c
+ touch $@
gram.c: BISONFLAGS += -d
gram.c: BISON_CHECK_CMD = $(PERL) $(srcdir)/check_keywords.pl $< $(top_srcdir)/src/include/parser/kwlist.h
$(SUBDIRS:%=%-recursive): fmgroids.h
-# see explanation in ../parser/Makefile
-fmgroids.h: fmgrtab.c ;
+# see notes in src/backend/parser/Makefile
+fmgroids.h: fmgrtab.c
+ touch $@
fmgrtab.c: Gen_fmgrtab.pl $(catalogdir)/Catalog.pm $(top_srcdir)/src/include/catalog/pg_proc.h
$(PERL) -I $(catalogdir) $< $(top_srcdir)/src/include/catalog/pg_proc.h
kwlookup.c: % : $(top_srcdir)/src/backend/parser/%
rm -f $@ && $(LN_S) $< .
-sql_help.c: sql_help.h ;
+# See notes in src/backend/parser/Makefile about the following two rules
+sql_help.c: sql_help.h
+ touch $@
+
sql_help.h: create_help.pl $(wildcard $(REFDOCDIR)/*.sgml)
$(PERL) $< $(REFDOCDIR) $*
psqlscan.c: FLEXFLAGS = -Cfe -p -p
psqlscan.c: FLEX_NO_BACKUP=yes
-distprep: sql_help.h psqlscan.c
+distprep: sql_help.h sql_help.c psqlscan.c
install: all installdirs
$(INSTALL_PROGRAM) psql$(X) '$(DESTDIR)$(bindir)/psql$(X)'
../ecpglib/typename.o: ../ecpglib/typename.c
$(MAKE) -C $(dir $@) $(notdir $@)
-preproc.h: preproc.c ;
+# See notes in src/backend/parser/Makefile about the following two rules
+preproc.h: preproc.c
+ touch $@
+
preproc.c: BISONFLAGS += -d
preproc.y: ../../../backend/parser/gram.y parse.pl ecpg.addons ecpg.header ecpg.tokens ecpg.trailer ecpg.type
pl_gram.o pl_handler.o pl_comp.o pl_exec.o pl_funcs.o pl_scanner.o: plpgsql.h pl_gram.h plerrcodes.h
# See notes in src/backend/parser/Makefile about the following two rules
-pl_gram.h: pl_gram.c ;
+pl_gram.h: pl_gram.c
+ touch $@
+
pl_gram.c: BISONFLAGS += -d
# generate plerrcodes.h from src/backend/utils/errcodes.txt
distprep: specparse.c specscanner.c
-# There is no correct way to write a rule that generates two files.
-# Rules with two targets don't have that meaning, they are merely
-# shorthand for two otherwise separate rules. To be safe for parallel
-# make, we must chain the dependencies like this. The semicolon is
-# important, otherwise make will choose the built-in rule for
-# gram.y=>gram.c.
-
-specparse.h: specparse.c ;
-
# specscanner is compiled as part of specparse
specparse.o: specscanner.c
projects / postgresql / commitdiff