Fix Hot-Standby initialization of clog and subtrans.

These bugs can cause data loss on standbys started with hot_standby=on at
the moment they start to accept read only queries, by marking committed
transactions as uncommited. The likelihood of such corruptions is small
unless the primary has a high transaction rate.

5a031a5556ff83b8a9646892715d7fef415b83c3 fixed bugs in HS's startup logic
by maintaining less state until at least STANDBY_SNAPSHOT_PENDING state
was reached, missing the fact that both clog and subtrans are written to
before that. This only failed to fail in common cases because the usage
of ExtendCLOG in procarray.c was superflous since clog extensions are
actually WAL logged.

f44eedc3f0f347a856eea8590730769125964597/I then tried to fix the missing
extensions of pg_subtrans due to the former commit's changes - which are
not WAL logged - by performing the extensions when switching to a state
> STANDBY_INITIALIZED and not performing xid assignments before that -
again missing the fact that ExtendCLOG is unneccessary - but screwed up
twice: Once because latestObservedXid wasn't updated anymore in that
state due to the earlier commit and once by having an off-by-one error in
the loop performing extensions. This means that whenever a
CLOG_XACTS_PER_PAGE (32768 with default settings) boundary was crossed
between the start of the checkpoint recovery started from and the first
xl_running_xact record old transactions commit bits in pg_clog could be
overwritten if they started and committed in that window.

Fix this mess by not performing ExtendCLOG() in HS at all anymore since
it's unneeded and evidently dangerous and by performing subtrans
extensions even before reaching STANDBY_SNAPSHOT_PENDING.

Analysis and patch by Andres Freund. Reported by Christophe Pettus.
Backpatch down to 9.0, like the previous commit that caused this.

diff --git a/src/backend/access/transam/clog.c b/src/backend/access/transam/clog.c
index cb95aa34dda602e6a394635c4090cd293d2b72b1..6a963b6116d373dac947a428fa230cd8a55143b2 100644 (file)
--- a/src/backend/access/transam/clog.c
+++ b/src/backend/access/transam/clog.c
@@ -622,7 +622,7 @@ ExtendCLOG(TransactionId newestXact)
        LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
 
        /* Zero the page and make an XLOG entry about it */
-       ZeroCLOGPage(pageno, !InRecovery);
+       ZeroCLOGPage(pageno, true);
 
        LWLockRelease(CLogControlLock);
 }

diff --git a/src/backend/storage/ipc/procarray.c b/src/backend/storage/ipc/procarray.c
index c2f86ff2c4a7cc1bbb3dabbd5a39fe053ef6e223..e801c8def0c616c348f47bcb78051e1754fc552f 100644 (file)
--- a/src/backend/storage/ipc/procarray.c
+++ b/src/backend/storage/ipc/procarray.c
@@ -473,7 +473,7 @@ ProcArrayClearTransaction(PGPROC *proc)
  * ProcArrayInitRecovery -- initialize recovery xid mgmt environment
  *
  * Remember up to where the startup process initialized the CLOG and subtrans
- * so we can ensure its initialized gaplessly up to the point where necessary
+ * so we can ensure it's initialized gaplessly up to the point where necessary
  * while in recovery.
  */
 void
@@ -483,9 +483,10 @@ ProcArrayInitRecovery(TransactionId initializedUptoXID)
        Assert(TransactionIdIsNormal(initializedUptoXID));
 
        /*
-        * we set latestObservedXid to the xid SUBTRANS has been initialized upto
-        * so we can extend it from that point onwards when we reach a consistent
-        * state in ProcArrayApplyRecoveryInfo().
+        * we set latestObservedXid to the xid SUBTRANS has been initialized upto,
+        * so we can extend it from that point onwards in
+        * RecordKnownAssignedTransactionIds, and when we get consistent in
+        * ProcArrayApplyRecoveryInfo().
         */
        latestObservedXid = initializedUptoXID;
        TransactionIdRetreat(latestObservedXid);
@@ -661,17 +662,23 @@ ProcArrayApplyRecoveryInfo(RunningTransactions running)
        pfree(xids);
 
        /*
-        * latestObservedXid is set to the the point where SUBTRANS was started up
-        * to, initialize subtrans from thereon, up to nextXid - 1.
+        * latestObservedXid is at least set to the the point where SUBTRANS was
+        * started up to (c.f. ProcArrayInitRecovery()) or to the biggest xid
+        * RecordKnownAssignedTransactionIds() was called for.  Initialize
+        * subtrans from thereon, up to nextXid - 1.
+        *
+        * We need to duplicate parts of RecordKnownAssignedTransactionId() here,
+        * because we've just added xids to the known assigned xids machinery that
+        * haven't gone through RecordKnownAssignedTransactionId().
         */
        Assert(TransactionIdIsNormal(latestObservedXid));
+       TransactionIdAdvance(latestObservedXid);
        while (TransactionIdPrecedes(latestObservedXid, running->nextXid))
        {
-               ExtendCLOG(latestObservedXid);
                ExtendSUBTRANS(latestObservedXid);
-
                TransactionIdAdvance(latestObservedXid);
        }
+       TransactionIdRetreat(latestObservedXid);  /* = running->nextXid - 1 */
 
        /* ----------
         * Now we've got the running xids we need to set the global values that
@@ -756,10 +763,6 @@ ProcArrayApplyXidAssignment(TransactionId topxid,
 
        Assert(standbyState >= STANDBY_INITIALIZED);
 
-       /* can't do anything useful unless we have more state setup */
-       if (standbyState == STANDBY_INITIALIZED)
-               return;
-
        max_xid = TransactionIdLatest(topxid, nsubxids, subxids);
 
        /*
@@ -786,6 +789,10 @@ ProcArrayApplyXidAssignment(TransactionId topxid,
        for (i = 0; i < nsubxids; i++)
                SubTransSetParent(subxids[i], topxid, false);
 
+       /* KnownAssignedXids isn't maintained yet, so we're done for now */
+       if (standbyState == STANDBY_INITIALIZED)
+               return;
+
        /*
         * Uses same locking as transaction commit
         */
@@ -2661,18 +2668,11 @@ RecordKnownAssignedTransactionIds(TransactionId xid)
 {
        Assert(standbyState >= STANDBY_INITIALIZED);
        Assert(TransactionIdIsValid(xid));
+       Assert(TransactionIdIsValid(latestObservedXid));
 
        elog(trace_recovery(DEBUG4), "record known xact %u latestObservedXid %u",
                 xid, latestObservedXid);
 
-       /*
-        * If the KnownAssignedXids machinery isn't up yet, do nothing.
-        */
-       if (standbyState <= STANDBY_INITIALIZED)
-               return;
-
-       Assert(TransactionIdIsValid(latestObservedXid));
-
        /*
         * When a newly observed xid arrives, it is frequently the case that it is
         * *not* the next xid in sequence. When this occurs, we must treat the
@@ -2683,22 +2683,34 @@ RecordKnownAssignedTransactionIds(TransactionId xid)
                TransactionId next_expected_xid;
 
                /*
-                * Extend clog and subtrans like we do in GetNewTransactionId() during
-                * normal operation using individual extend steps. Typical case
-                * requires almost no activity.
+                * Extend subtrans like we do in GetNewTransactionId() during normal
+                * operation using individual extend steps. Note that we do not need
+                * to extend clog since its extensions are WAL logged.
+                *
+                * This part has to be done regardless of standbyState since we
+                * immediately start assigning subtransactions to their toplevel
+                * transactions.
                 */
                next_expected_xid = latestObservedXid;
-               TransactionIdAdvance(next_expected_xid);
-               while (TransactionIdPrecedesOrEquals(next_expected_xid, xid))
+               while (TransactionIdPrecedes(next_expected_xid, xid))
                {
-                       ExtendCLOG(next_expected_xid);
+                       TransactionIdAdvance(next_expected_xid);
                        ExtendSUBTRANS(next_expected_xid);
+               }
+               Assert(next_expected_xid == xid);
 
-                       TransactionIdAdvance(next_expected_xid);
+               /*
+                * If the KnownAssignedXids machinery isn't up yet, there's nothing
+                * more to do since we don't track assigned xids yet.
+                */
+               if (standbyState <= STANDBY_INITIALIZED)
+               {
+                       latestObservedXid = xid;
+                       return;
                }
 
                /*
-                * Add the new xids onto the KnownAssignedXids array.
+                * Add (latestObservedXid, xid] onto the KnownAssignedXids array.
                 */
                next_expected_xid = latestObservedXid;
                TransactionIdAdvance(next_expected_xid);