CacheInvalidateHeapTuple(relation, tuple, NULL);
}
+#define FRM_NOOP 0x0001
+#define FRM_INVALIDATE_XMAX 0x0002
+#define FRM_RETURN_IS_XID 0x0004
+#define FRM_RETURN_IS_MULTI 0x0008
+#define FRM_MARK_COMMITTED 0x0010
/*
- * heap_freeze_tuple
+ * FreezeMultiXactId
+ * Determine what to do during freezing when a tuple is marked by a
+ * MultiXactId.
+ *
+ * NB -- this might have the side-effect of creating a new MultiXactId!
+ *
+ * "flags" is an output value; it's used to tell caller what to do on return.
+ * Possible flags are:
+ * FRM_NOOP
+ * don't do anything -- keep existing Xmax
+ * FRM_INVALIDATE_XMAX
+ * mark Xmax as InvalidTransactionId and set XMAX_INVALID flag.
+ * FRM_RETURN_IS_XID
+ * The Xid return value is a single update Xid to set as xmax.
+ * FRM_MARK_COMMITTED
+ * Xmax can be marked as HEAP_XMAX_COMMITTED
+ * FRM_RETURN_IS_MULTI
+ * The return value is a new MultiXactId to set as new Xmax.
+ * (caller must obtain proper infomask bits using GetMultiXactIdHintBits)
+ */
+static TransactionId
+FreezeMultiXactId(MultiXactId multi, uint16 t_infomask,
+ TransactionId cutoff_xid, MultiXactId cutoff_multi,
+ uint16 *flags)
+{
+ TransactionId xid = InvalidTransactionId;
+ int i;
+ MultiXactMember *members;
+ int nmembers;
+ bool need_replace;
+ int nnewmembers;
+ MultiXactMember *newmembers;
+ bool has_lockers;
+ TransactionId update_xid;
+ bool update_committed;
+
+ *flags = 0;
+
+ /* We should only be called in Multis */
+ Assert(t_infomask & HEAP_XMAX_IS_MULTI);
+
+ if (!MultiXactIdIsValid(multi))
+ {
+ /* Ensure infomask bits are appropriately set/reset */
+ *flags |= FRM_INVALIDATE_XMAX;
+ return InvalidTransactionId;
+ }
+ else if (MultiXactIdPrecedes(multi, cutoff_multi))
+ {
+ /*
+ * This old multi cannot possibly have members still running. If it
+ * was a locker only, it can be removed without any further
+ * consideration; but if it contained an update, we might need to
+ * preserve it.
+ */
+ Assert(!MultiXactIdIsRunning(multi));
+ if (HEAP_XMAX_IS_LOCKED_ONLY(t_infomask))
+ {
+ *flags |= FRM_INVALIDATE_XMAX;
+ xid = InvalidTransactionId; /* not strictly necessary */
+ }
+ else
+ {
+ /* replace multi by update xid */
+ xid = MultiXactIdGetUpdateXid(multi, t_infomask);
+
+ /* wasn't only a lock, xid needs to be valid */
+ Assert(TransactionIdIsValid(xid));
+
+ /*
+ * If the xid is older than the cutoff, it has to have aborted,
+ * otherwise the tuple would have gotten pruned away.
+ */
+ if (TransactionIdPrecedes(xid, cutoff_xid))
+ {
+ Assert(!TransactionIdDidCommit(xid));
+ *flags |= FRM_INVALIDATE_XMAX;
+ xid = InvalidTransactionId; /* not strictly necessary */
+ }
+ else
+ {
+ *flags |= FRM_RETURN_IS_XID;
+ }
+ }
+
+ return xid;
+ }
+
+ /*
+ * This multixact might have or might not have members still running, but
+ * we know it's valid and is newer than the cutoff point for multis.
+ * However, some member(s) of it may be below the cutoff for Xids, so we
+ * need to walk the whole members array to figure out what to do, if
+ * anything.
+ */
+
+ nmembers = GetMultiXactIdMembers(multi, &members, false);
+ if (nmembers <= 0)
+ {
+ /* Nothing worth keeping */
+ *flags |= FRM_INVALIDATE_XMAX;
+ return InvalidTransactionId;
+ }
+
+ /* is there anything older than the cutoff? */
+ need_replace = false;
+ for (i = 0; i < nmembers; i++)
+ {
+ if (TransactionIdPrecedes(members[i].xid, cutoff_xid))
+ {
+ need_replace = true;
+ break;
+ }
+ }
+
+ /*
+ * In the simplest case, there is no member older than the cutoff; we can
+ * keep the existing MultiXactId as is.
+ */
+ if (!need_replace)
+ {
+ *flags |= FRM_NOOP;
+ pfree(members);
+ return InvalidTransactionId;
+ }
+
+ /*
+ * If the multi needs to be updated, figure out which members do we need
+ * to keep.
+ */
+ nnewmembers = 0;
+ newmembers = palloc(sizeof(MultiXactMember) * nmembers);
+ has_lockers = false;
+ update_xid = InvalidTransactionId;
+ update_committed = false;
+
+ for (i = 0; i < nmembers; i++)
+ {
+ /*
+ * Determine whether to keep this member or ignore it.
+ */
+ if (ISUPDATE_from_mxstatus(members[i].status))
+ {
+ TransactionId xid = members[i].xid;
+
+ /*
+ * It's an update; should we keep it? If the transaction is known
+ * aborted then it's okay to ignore it, otherwise not. However,
+ * if the Xid is older than the cutoff_xid, we must remove it.
+ * Note that such an old updater cannot possibly be committed,
+ * because HeapTupleSatisfiesVacuum would have returned
+ * HEAPTUPLE_DEAD and we would not be trying to freeze the tuple.
+ *
+ * Note the TransactionIdDidAbort() test is just an optimization
+ * and not strictly necessary for correctness.
+ *
+ * As with all tuple visibility routines, it's critical to test
+ * TransactionIdIsInProgress before the transam.c routines,
+ * because of race conditions explained in detail in tqual.c.
+ */
+ if (TransactionIdIsCurrentTransactionId(xid) ||
+ TransactionIdIsInProgress(xid))
+ {
+ Assert(!TransactionIdIsValid(update_xid));
+ update_xid = xid;
+ }
+ else if (!TransactionIdDidAbort(xid))
+ {
+ /*
+ * Test whether to tell caller to set HEAP_XMAX_COMMITTED
+ * while we have the Xid still in cache. Note this can only
+ * be done if the transaction is known not running.
+ */
+ if (TransactionIdDidCommit(xid))
+ update_committed = true;
+ Assert(!TransactionIdIsValid(update_xid));
+ update_xid = xid;
+ }
+
+ /*
+ * If we determined that it's an Xid corresponding to an update
+ * that must be retained, additionally add it to the list of
+ * members of the new Multis, in case we end up using that. (We
+ * might still decide to use only an update Xid and not a multi,
+ * but it's easier to maintain the list as we walk the old members
+ * list.)
+ *
+ * It is possible to end up with a very old updater Xid that
+ * crashed and thus did not mark itself as aborted in pg_clog.
+ * That would manifest as a pre-cutoff Xid. Make sure to ignore
+ * it.
+ */
+ if (TransactionIdIsValid(update_xid))
+ {
+ if (!TransactionIdPrecedes(update_xid, cutoff_xid))
+ {
+ newmembers[nnewmembers++] = members[i];
+ }
+ else
+ {
+ /* cannot have committed: would be HEAPTUPLE_DEAD */
+ Assert(!TransactionIdDidCommit(update_xid));
+ update_xid = InvalidTransactionId;
+ update_committed = false;
+ }
+ }
+ }
+ else
+ {
+ /* We only keep lockers if they are still running */
+ if (TransactionIdIsCurrentTransactionId(members[i].xid) ||
+ TransactionIdIsInProgress(members[i].xid))
+ {
+ /* running locker cannot possibly be older than the cutoff */
+ Assert(!TransactionIdPrecedes(members[i].xid, cutoff_xid));
+ newmembers[nnewmembers++] = members[i];
+ has_lockers = true;
+ }
+ }
+ }
+
+ pfree(members);
+
+ if (nnewmembers == 0)
+ {
+ /* nothing worth keeping!? Tell caller to remove the whole thing */
+ *flags |= FRM_INVALIDATE_XMAX;
+ xid = InvalidTransactionId;
+ }
+ else if (TransactionIdIsValid(update_xid) && !has_lockers)
+ {
+ /*
+ * If there's a single member and it's an update, pass it back alone
+ * without creating a new Multi. (XXX we could do this when there's a
+ * single remaining locker, too, but that would complicate the API too
+ * much; moreover, the case with the single updater is more
+ * interesting, because those are longer-lived.)
+ */
+ Assert(nnewmembers == 1);
+ *flags |= FRM_RETURN_IS_XID;
+ if (update_committed)
+ *flags |= FRM_MARK_COMMITTED;
+ xid = update_xid;
+ }
+ else
+ {
+ /*
+ * Create a new multixact with the surviving members of the previous
+ * one, to set as new Xmax in the tuple.
+ */
+ xid = MultiXactIdCreateFromMembers(nnewmembers, newmembers);
+ *flags |= FRM_RETURN_IS_MULTI;
+ }
+
+ pfree(newmembers);
+
+ return xid;
+}
+
+/*
+ * heap_prepare_freeze_tuple
*
* Check to see whether any of the XID fields of a tuple (xmin, xmax, xvac)
- * are older than the specified cutoff XID. If so, replace them with
- * FrozenTransactionId or InvalidTransactionId as appropriate, and return
- * TRUE. Return FALSE if nothing was changed.
+ * are older than the specified cutoff XID and cutoff MultiXactId. If so,
+ * setup enough state (in the *frz output argument) to later execute and
+ * WAL-log what we would need to do, and return TRUE. Return FALSE if nothing
+ * is to be changed.
+ *
+ * Caller is responsible for setting the offset field, if appropriate.
*
* It is assumed that the caller has checked the tuple with
* HeapTupleSatisfiesVacuum() and determined that it is not HEAPTUPLE_DEAD
* NB: cutoff_xid *must* be <= the current global xmin, to ensure that any
* XID older than it could neither be running nor seen as running by any
* open transaction. This ensures that the replacement will not change
- * anyone's idea of the tuple state. Also, since we assume the tuple is
- * not HEAPTUPLE_DEAD, the fact that an XID is not still running allows us
- * to assume that it is either committed good or aborted, as appropriate;
- * so we need no external state checks to decide what to do. (This is good
- * because this function is applied during WAL recovery, when we don't have
- * access to any such state, and can't depend on the hint bits to be set.)
- * There is an exception we make which is to assume GetMultiXactIdMembers can
- * be called during recovery.
- *
+ * anyone's idea of the tuple state.
* Similarly, cutoff_multi must be less than or equal to the smallest
* MultiXactId used by any transaction currently open.
*
* If the tuple is in a shared buffer, caller must hold an exclusive lock on
* that buffer.
*
- * Note: it might seem we could make the changes without exclusive lock, since
- * TransactionId read/write is assumed atomic anyway. However there is a race
- * condition: someone who just fetched an old XID that we overwrite here could
- * conceivably not finish checking the XID against pg_clog before we finish
- * the VACUUM and perhaps truncate off the part of pg_clog he needs. Getting
- * exclusive lock ensures no other backend is in process of checking the
- * tuple status. Also, getting exclusive lock makes it safe to adjust the
- * infomask bits.
- *
- * NB: Cannot rely on hint bits here, they might not be set after a crash or
- * on a standby.
+ * NB: It is not enough to set hint bits to indicate something is
+ * committed/invalid -- they might not be set on a standby, or after crash
+ * recovery. We really need to remove old xids.
*/
bool
-heap_freeze_tuple(HeapTupleHeader tuple, TransactionId cutoff_xid,
- MultiXactId cutoff_multi)
+heap_prepare_freeze_tuple(HeapTupleHeader tuple, TransactionId cutoff_xid,
+ TransactionId cutoff_multi,
+ xl_heap_freeze_tuple *frz)
+
{
bool changed = false;
bool freeze_xmax = false;
TransactionId xid;
+ frz->frzflags = 0;
+ frz->t_infomask2 = tuple->t_infomask2;
+ frz->t_infomask = tuple->t_infomask;
+ frz->xmax = HeapTupleHeaderGetRawXmax(tuple);
+
/* Process xmin */
xid = HeapTupleHeaderGetXmin(tuple);
if (TransactionIdIsNormal(xid) &&
TransactionIdPrecedes(xid, cutoff_xid))
{
- HeapTupleHeaderSetXmin(tuple, FrozenTransactionId);
+ frz->frzflags |= XLH_FREEZE_XMIN;
/*
* Might as well fix the hint bits too; usually XMIN_COMMITTED will
* already be set here, but there's a small chance not.
*/
- Assert(!(tuple->t_infomask & HEAP_XMIN_INVALID));
- tuple->t_infomask |= HEAP_XMIN_COMMITTED;
+ frz->t_infomask |= HEAP_XMIN_COMMITTED;
changed = true;
}
if (tuple->t_infomask & HEAP_XMAX_IS_MULTI)
{
- if (!MultiXactIdIsValid(xid))
+ TransactionId newxmax;
+ uint16 flags;
+
+ newxmax = FreezeMultiXactId(xid, tuple->t_infomask,
+ cutoff_xid, cutoff_multi, &flags);
+
+ if (flags & FRM_INVALIDATE_XMAX)
+ freeze_xmax = true;
+ else if (flags & FRM_RETURN_IS_XID)
{
- /* no xmax set, ignore */
- ;
+ /*
+ * NB -- some of these transformations are only valid because
+ * we know the return Xid is a tuple updater (i.e. not merely a
+ * locker.) Also note that the only reason we don't explicitely
+ * worry about HEAP_KEYS_UPDATED is because it lives in t_infomask2
+ * rather than t_infomask.
+ */
+ frz->t_infomask &= ~HEAP_XMAX_BITS;
+ frz->xmax = newxmax;
+ if (flags & FRM_MARK_COMMITTED)
+ frz->t_infomask &= HEAP_XMAX_COMMITTED;
+ changed = true;
}
- else if (MultiXactIdPrecedes(xid, cutoff_multi))
+ else if (flags & FRM_RETURN_IS_MULTI)
{
+ uint16 newbits;
+ uint16 newbits2;
+
/*
- * This old multi cannot possibly be running. If it was a locker
- * only, it can be removed without much further thought; but if it
- * contained an update, we need to preserve it.
+ * We can't use GetMultiXactIdHintBits directly on the new multi
+ * here; that routine initializes the masks to all zeroes, which
+ * would lose other bits we need. Doing it this way ensures all
+ * unrelated bits remain untouched.
*/
- if (HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask))
- freeze_xmax = true;
- else
- {
- TransactionId update_xid;
+ frz->t_infomask &= ~HEAP_XMAX_BITS;
+ frz->t_infomask2 &= ~HEAP_KEYS_UPDATED;
+ GetMultiXactIdHintBits(newxmax, &newbits, &newbits2);
+ frz->t_infomask |= newbits;
+ frz->t_infomask2 |= newbits2;
- update_xid = HeapTupleGetUpdateXid(tuple);
+ frz->xmax = newxmax;
- /*
- * The multixact has an update hidden within. Get rid of it.
- *
- * If the update_xid is below the cutoff_xid, it necessarily
- * must be an aborted transaction. In a primary server, such
- * an Xmax would have gotten marked invalid by
- * HeapTupleSatisfiesVacuum, but in a replica that is not
- * called before we are, so deal with it in the same way.
- *
- * If not below the cutoff_xid, then the tuple would have been
- * pruned by vacuum, if the update committed long enough ago,
- * and we wouldn't be freezing it; so it's either recently
- * committed, or in-progress. Deal with this by setting the
- * Xmax to the update Xid directly and remove the IS_MULTI
- * bit. (We know there cannot be running lockers in this
- * multi, because it's below the cutoff_multi value.)
- */
-
- if (TransactionIdPrecedes(update_xid, cutoff_xid))
- {
- Assert(InRecovery || TransactionIdDidAbort(update_xid));
- freeze_xmax = true;
- }
- else
- {
- Assert(InRecovery || !TransactionIdIsInProgress(update_xid));
- tuple->t_infomask &= ~HEAP_XMAX_BITS;
- HeapTupleHeaderSetXmax(tuple, update_xid);
- changed = true;
- }
- }
- }
- else if (HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask))
- {
- /* newer than the cutoff, so don't touch it */
- ;
+ changed = true;
}
else
{
- TransactionId update_xid;
-
- /*
- * This is a multixact which is not marked LOCK_ONLY, but which
- * is newer than the cutoff_multi. If the update_xid is below the
- * cutoff_xid point, then we can just freeze the Xmax in the
- * tuple, removing it altogether. This seems simple, but there
- * are several underlying assumptions:
- *
- * 1. A tuple marked by an multixact containing a very old
- * committed update Xid would have been pruned away by vacuum; we
- * wouldn't be freezing this tuple at all.
- *
- * 2. There cannot possibly be any live locking members remaining
- * in the multixact. This is because if they were alive, the
- * update's Xid would had been considered, via the lockers'
- * snapshot's Xmin, as part the cutoff_xid.
- *
- * 3. We don't create new MultiXacts via MultiXactIdExpand() that
- * include a very old aborted update Xid: in that function we only
- * include update Xids corresponding to transactions that are
- * committed or in-progress.
- */
- update_xid = HeapTupleGetUpdateXid(tuple);
- if (TransactionIdPrecedes(update_xid, cutoff_xid))
- freeze_xmax = true;
+ Assert(flags & FRM_NOOP);
}
}
else if (TransactionIdIsNormal(xid) &&
if (freeze_xmax)
{
- HeapTupleHeaderSetXmax(tuple, InvalidTransactionId);
+ frz->xmax = InvalidTransactionId;
/*
* The tuple might be marked either XMAX_INVALID or XMAX_COMMITTED +
* LOCKED. Normalize to INVALID just to be sure no one gets confused.
* Also get rid of the HEAP_KEYS_UPDATED bit.
*/
- tuple->t_infomask &= ~HEAP_XMAX_BITS;
- tuple->t_infomask |= HEAP_XMAX_INVALID;
- HeapTupleHeaderClearHotUpdated(tuple);
- tuple->t_infomask2 &= ~HEAP_KEYS_UPDATED;
+ frz->t_infomask &= ~HEAP_XMAX_BITS;
+ frz->t_infomask |= HEAP_XMAX_INVALID;
+ frz->t_infomask2 &= ~HEAP_HOT_UPDATED;
+ frz->t_infomask2 &= ~HEAP_KEYS_UPDATED;
changed = true;
}
* xvac transaction succeeded.
*/
if (tuple->t_infomask & HEAP_MOVED_OFF)
- HeapTupleHeaderSetXvac(tuple, InvalidTransactionId);
+ frz->frzflags |= XLH_INVALID_XVAC;
else
- HeapTupleHeaderSetXvac(tuple, FrozenTransactionId);
+ frz->frzflags |= XLH_FREEZE_XVAC;
/*
* Might as well fix the hint bits too; usually XMIN_COMMITTED
* will already be set here, but there's a small chance not.
*/
Assert(!(tuple->t_infomask & HEAP_XMIN_INVALID));
- tuple->t_infomask |= HEAP_XMIN_COMMITTED;
+ frz->t_infomask |= HEAP_XMIN_COMMITTED;
changed = true;
}
}
return changed;
}
+/*
+ * heap_execute_freeze_tuple
+ * Execute the prepared freezing of a tuple.
+ *
+ * Caller is responsible for ensuring that no other backend can access the
+ * storage underlying this tuple, either by holding an exclusive lock on the
+ * buffer containing it (which is what lazy VACUUM does), or by having it by
+ * in private storage (which is what CLUSTER and friends do).
+ *
+ * Note: it might seem we could make the changes without exclusive lock, since
+ * TransactionId read/write is assumed atomic anyway. However there is a race
+ * condition: someone who just fetched an old XID that we overwrite here could
+ * conceivably not finish checking the XID against pg_clog before we finish
+ * the VACUUM and perhaps truncate off the part of pg_clog he needs. Getting
+ * exclusive lock ensures no other backend is in process of checking the
+ * tuple status. Also, getting exclusive lock makes it safe to adjust the
+ * infomask bits.
+ *
+ * NB: All code in here must be safe to execute during crash recovery!
+ */
+void
+heap_execute_freeze_tuple(HeapTupleHeader tuple, xl_heap_freeze_tuple *frz)
+{
+ if (frz->frzflags & XLH_FREEZE_XMIN)
+ HeapTupleHeaderSetXmin(tuple, FrozenTransactionId);
+
+ HeapTupleHeaderSetXmax(tuple, frz->xmax);
+
+ if (frz->frzflags & XLH_FREEZE_XVAC)
+ HeapTupleHeaderSetXvac(tuple, FrozenTransactionId);
+
+ if (frz->frzflags & XLH_INVALID_XVAC)
+ HeapTupleHeaderSetXvac(tuple, InvalidTransactionId);
+
+ tuple->t_infomask = frz->t_infomask;
+ tuple->t_infomask2 = frz->t_infomask2;
+}
+
+/*
+ * heap_freeze_tuple
+ * Freeze tuple in place, without WAL logging.
+ *
+ * Useful for callers like CLUSTER that perform their own WAL logging.
+ */
+bool
+heap_freeze_tuple(HeapTupleHeader tuple, TransactionId cutoff_xid,
+ TransactionId cutoff_multi)
+{
+ xl_heap_freeze_tuple frz;
+ bool do_freeze;
+
+ do_freeze = heap_prepare_freeze_tuple(tuple, cutoff_xid, cutoff_multi,
+ &frz);
+
+ /*
+ * Note that because this is not a WAL-logged operation, we don't need to
+ * fill in the offset in the freeze record.
+ */
+
+ if (do_freeze)
+ heap_execute_freeze_tuple(tuple, &frz);
+ return do_freeze;
+}
+
/*
* For a given MultiXactId, return the hint bits that should be set in the
* tuple's infomask.
}
else if (MultiXactIdPrecedes(multi, cutoff_multi))
return true;
- else if (HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask))
- {
- /* only-locker multis don't need internal examination */
- ;
- }
else
{
- if (TransactionIdPrecedes(HeapTupleGetUpdateXid(tuple),
- cutoff_xid))
- return true;
+ MultiXactMember *members;
+ int nmembers;
+ int i;
+
+ /* need to check whether any member of the mxact is too old */
+
+ nmembers = GetMultiXactIdMembers(multi, &members, false);
+
+ for (i = 0; i < nmembers; i++)
+ {
+ if (TransactionIdPrecedes(members[i].xid, cutoff_xid))
+ {
+ pfree(members);
+ return true;
+ }
+ }
+ if (nmembers > 0)
+ pfree(members);
}
}
else
}
/*
- * Perform XLogInsert for a heap-freeze operation. Caller must already
- * have modified the buffer and marked it dirty.
+ * Perform XLogInsert for a heap-freeze operation. Caller must have already
+ * modified the buffer and marked it dirty.
*/
XLogRecPtr
-log_heap_freeze(Relation reln, Buffer buffer,
- TransactionId cutoff_xid, MultiXactId cutoff_multi,
- OffsetNumber *offsets, int offcnt)
+log_heap_freeze(Relation reln, Buffer buffer, TransactionId cutoff_xid,
+ xl_heap_freeze_tuple *tuples, int ntuples)
{
- xl_heap_freeze xlrec;
+ xl_heap_freeze_page xlrec;
XLogRecPtr recptr;
XLogRecData rdata[2];
/* Caller should not call me on a non-WAL-logged relation */
Assert(RelationNeedsWAL(reln));
/* nor when there are no tuples to freeze */
- Assert(offcnt > 0);
+ Assert(ntuples > 0);
xlrec.node = reln->rd_node;
xlrec.block = BufferGetBlockNumber(buffer);
xlrec.cutoff_xid = cutoff_xid;
- xlrec.cutoff_multi = cutoff_multi;
+ xlrec.ntuples = ntuples;
rdata[0].data = (char *) &xlrec;
- rdata[0].len = SizeOfHeapFreeze;
+ rdata[0].len = SizeOfHeapFreezePage;
rdata[0].buffer = InvalidBuffer;
rdata[0].next = &(rdata[1]);
/*
- * The tuple-offsets array is not actually in the buffer, but pretend that
- * it is. When XLogInsert stores the whole buffer, the offsets array need
+ * The freeze plan array is not actually in the buffer, but pretend that
+ * it is. When XLogInsert stores the whole buffer, the freeze plan need
* not be stored too.
*/
- rdata[1].data = (char *) offsets;
- rdata[1].len = offcnt * sizeof(OffsetNumber);
+ rdata[1].data = (char *) tuples;
+ rdata[1].len = ntuples * sizeof(xl_heap_freeze_tuple);
rdata[1].buffer = buffer;
rdata[1].buffer_std = true;
rdata[1].next = NULL;
- recptr = XLogInsert(RM_HEAP2_ID, XLOG_HEAP2_FREEZE, rdata);
+ recptr = XLogInsert(RM_HEAP2_ID, XLOG_HEAP2_FREEZE_PAGE, rdata);
return recptr;
}
XLogRecordPageWithFreeSpace(xlrec->node, xlrec->block, freespace);
}
-static void
-heap_xlog_freeze(XLogRecPtr lsn, XLogRecord *record)
-{
- xl_heap_freeze *xlrec = (xl_heap_freeze *) XLogRecGetData(record);
- TransactionId cutoff_xid = xlrec->cutoff_xid;
- MultiXactId cutoff_multi = xlrec->cutoff_multi;
- Buffer buffer;
- Page page;
-
- /*
- * In Hot Standby mode, ensure that there's no queries running which still
- * consider the frozen xids as running.
- */
- if (InHotStandby)
- ResolveRecoveryConflictWithSnapshot(cutoff_xid, xlrec->node);
-
- /* If we have a full-page image, restore it and we're done */
- if (record->xl_info & XLR_BKP_BLOCK(0))
- {
- (void) RestoreBackupBlock(lsn, record, 0, false, false);
- return;
- }
-
- buffer = XLogReadBuffer(xlrec->node, xlrec->block, false);
- if (!BufferIsValid(buffer))
- return;
- page = (Page) BufferGetPage(buffer);
-
- if (lsn <= PageGetLSN(page))
- {
- UnlockReleaseBuffer(buffer);
- return;
- }
-
- if (record->xl_len > SizeOfHeapFreeze)
- {
- OffsetNumber *offsets;
- OffsetNumber *offsets_end;
-
- offsets = (OffsetNumber *) ((char *) xlrec + SizeOfHeapFreeze);
- offsets_end = (OffsetNumber *) ((char *) xlrec + record->xl_len);
-
- while (offsets < offsets_end)
- {
- /* offsets[] entries are one-based */
- ItemId lp = PageGetItemId(page, *offsets);
- HeapTupleHeader tuple = (HeapTupleHeader) PageGetItem(page, lp);
-
- (void) heap_freeze_tuple(tuple, cutoff_xid, cutoff_multi);
- offsets++;
- }
- }
-
- PageSetLSN(page, lsn);
- MarkBufferDirty(buffer);
- UnlockReleaseBuffer(buffer);
-}
-
/*
* Replay XLOG_HEAP2_VISIBLE record.
*
}
}
+/*
+ * Replay XLOG_HEAP2_FREEZE_PAGE records
+ */
+static void
+heap_xlog_freeze_page(XLogRecPtr lsn, XLogRecord *record)
+{
+ xl_heap_freeze_page *xlrec = (xl_heap_freeze_page *) XLogRecGetData(record);
+ TransactionId cutoff_xid = xlrec->cutoff_xid;
+ Buffer buffer;
+ Page page;
+ int ntup;
+
+ /*
+ * In Hot Standby mode, ensure that there's no queries running which still
+ * consider the frozen xids as running.
+ */
+ if (InHotStandby)
+ ResolveRecoveryConflictWithSnapshot(cutoff_xid, xlrec->node);
+
+ /* If we have a full-page image, restore it and we're done */
+ if (record->xl_info & XLR_BKP_BLOCK(0))
+ {
+ (void) RestoreBackupBlock(lsn, record, 0, false, false);
+ return;
+ }
+
+ buffer = XLogReadBuffer(xlrec->node, xlrec->block, false);
+ if (!BufferIsValid(buffer))
+ return;
+
+ page = (Page) BufferGetPage(buffer);
+
+ if (lsn <= PageGetLSN(page))
+ {
+ UnlockReleaseBuffer(buffer);
+ return;
+ }
+
+ /* now execute freeze plan for each frozen tuple */
+ for (ntup = 0; ntup < xlrec->ntuples; ntup++)
+ {
+ xl_heap_freeze_tuple *xlrec_tp;
+ ItemId lp;
+ HeapTupleHeader tuple;
+
+ xlrec_tp = &xlrec->tuples[ntup];
+ lp = PageGetItemId(page, xlrec_tp->offset); /* offsets are one-based */
+ tuple = (HeapTupleHeader) PageGetItem(page, lp);
+
+ heap_execute_freeze_tuple(tuple, xlrec_tp);
+ }
+
+ PageSetLSN(page, lsn);
+ MarkBufferDirty(buffer);
+ UnlockReleaseBuffer(buffer);
+}
+
static void
heap_xlog_newpage(XLogRecPtr lsn, XLogRecord *record)
{
switch (info & XLOG_HEAP_OPMASK)
{
- case XLOG_HEAP2_FREEZE:
- heap_xlog_freeze(lsn, record);
- break;
case XLOG_HEAP2_CLEAN:
heap_xlog_clean(lsn, record);
break;
+ case XLOG_HEAP2_FREEZE_PAGE:
+ heap_xlog_freeze_page(lsn, record);
+ break;
case XLOG_HEAP2_CLEANUP_INFO:
heap_xlog_cleanup_info(lsn, record);
break;
projects / postgresql / commitdiff