--- /dev/null
+// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "esp_bt_defs.h"
+
+
+ /*******************************************************************************
+ **
+ ** Function esp_ble_config_adv_data
+ **
+ ** Description This function is called to override the BTA default ADV parameters.
+ **
+ ** adv_data: Pointer to User defined ADV data structure. This
+ ** memory space can not be freed until p_adv_data_cback
+ ** is received.
+ ** p_adv_data_cback: set adv data complete callback.
+ **
+ ** Returns None
+ **
+ *******************************************************************************/
+ void esp_ble_config_adv_data(esp_ble_adv_data_cfg_t *adv_data,
+ esp_ble_set_adv_data_cmpl_cb_t *p_adv_data_cback)
+{
+ tBTA_BLE_AD_MASK data_mask = 0;
+ if(adv_data->adv_name != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_DEV_NAME;
+ BTA_DmSetDeviceName(adv_data->adv_name);
+ }
+ if(adv_data->ble_adv_data.int_range.low != 0 ||
+ adv_data->ble_adv_data.int_range.hi != 0)
+ data_mask |= BTM_BLE_AD_BIT_INT_RANGE;
+
+ if(adv_data->ble_adv_data.p_manu != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_MANU;
+ }
+
+ if(adv_data->ble_adv_data.p_services != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE;
+ }
+
+ if(adv_data->ble_adv_data.p_service_32b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_32;
+ }
+
+ if(adv_data->ble_adv_data.p_services_128b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_128;
+ }
+
+ if(adv_data->ble_adv_data.p_sol_services != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_SOL;
+ }
+
+ if(adv_data->ble_adv_data.p_sol_service_32b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_32SOL;
+ }
+
+ if(adv_data->ble_adv_data.p_sol_service_128b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_128SOL;
+ }
+
+ if(adv_data->ble_adv_data.p_service_data != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_DATA;
+ }
+
+ if(adv_data->ble_adv_data.appearance != 0)
+ {
+ data_mask |= BTM_BLE_AD_BIT_APPEARANCE;
+ }
+
+ if(adv_data->ble_adv_data.p_proprietary != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_PROPRIETARY;
+ }
+
+ if(adv_data->ble_adv_data.tx_power != 0)
+ {
+ data_mask |= BTM_BLE_AD_BIT_TX_PWR;
+ }
+
+ BTA_DmBleSetAdvConfig(data_mask, &(adv_data->ble_adv_data), p_adv_data_cback);
+}
+
+
+/*******************************************************************************
+**
+** Function esp_ble_set_scan_rsp
+**
+** Description This function is called to override the app scan response.
+**
+** Parameters Pointer to User defined ADV data structure
+**
+** Returns None
+**
+*******************************************************************************/
+void esp_ble_set_scan_rsp(esp_ble_adv_data_cfg_t *scan_rsp_data,
+ esp_ble_set_adv_data_cmpl_cb_t *p_scan_rsp_data_cback)
+{
+ tBTA_BLE_AD_MASK data_mask = 0;
+ if(scan_rsp_data->adv_name != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_DEV_NAME;
+ BTA_DmSetDeviceName(scan_rsp_data->adv_name);
+ }
+ if(scan_rsp_data->ble_adv_data.int_range.low != 0 ||
+ scan_rsp_data->ble_adv_data.int_range.hi != 0)
+ data_mask |= BTM_BLE_AD_BIT_INT_RANGE;
+
+ if(scan_rsp_data->ble_adv_data.p_manu != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_MANU;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_services != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_service_32b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_32;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_services_128b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_128;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_sol_services != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_SOL;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_sol_service_32b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_32SOL;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_sol_service_128b != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_128SOL;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_service_data != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_SERVICE_DATA;
+ }
+
+ if(scan_rsp_data->ble_adv_data.appearance != 0)
+ {
+ data_mask |= BTM_BLE_AD_BIT_APPEARANCE;
+ }
+
+ if(scan_rsp_data->ble_adv_data.p_proprietary != NULL)
+ {
+ data_mask |= BTM_BLE_AD_BIT_PROPRIETARY;
+ }
+
+ if(scan_rsp_data->ble_adv_data.tx_power != 0)
+ {
+ data_mask |= BTM_BLE_AD_BIT_TX_PWR;
+ }
+
+ BTA_DmBleSetScanRsp(data_mask, &(scan_rsp_data->ble_adv_data), p_scan_rsp_data_cback);
+}
+
+#if 0
+
+/*******************************************************************************
+**
+** @function esp_ble_config_adv_data
+**
+** @brief This function is called to override the BTA default ADV parameters.
+**
+** @param[in] adv_data: Pointer to User defined ADV data structure. This
+** memory space can not be freed until p_adv_data_cback
+** is received.
+** @param[in|out] adv_data_cback: set adv data complete callback.
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_config_adv_data (esp_ble_adv_data_cfg_t *adv_data,
+ esp_ble_set_adv_data_cmpl_cb_t *adv_data_cback)
+{
+ if(adv_data != NULL)
+ {
+ ble_config_adv_data(adv_data, adv_data_cback);
+ }else{
+ LOG_ERROR("The adv_data is NULL\n");
+ }
+
+ if(++adv_data != NULL)
+ {
+ ble_set_scan_rsp(adv_data, NULL);
+ }
+
+}
+#endif
+
+/*******************************************************************************
+**
+** @function esp_ble_start_advertising
+**
+** @brief This function is called to start advertising.
+**
+** @param[in] esp_ble_adv_params_all_t: ointer to User defined adv_params data structure.
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_start_advertising (esp_ble_adv_params_all_t *ble_adv_params)
+{
+ if (!API_BLE_ISVALID_PARAM(ble_adv_params->adv_int_min, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX) ||
+ !API_BLE_ISVALID_PARAM(ble_adv_params->adv_int_max, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX))
+ {
+ LOG_ERROR("Invalid advertisting interval parameters.\n");
+ return ;
+ }
+
+ if ((ble_adv_params->adv_type < API_NON_DISCOVERABLE) &&
+ (ble_adv_params->adv_type > API_BROADCASTER_MODE) )
+ {
+ LOG_ERROR("Invalid advertisting type parameters.\n");
+ return;
+ }
+
+ if ((ble_adv_params->adv_filter_policy < ADV_ALLOW_SCAN_ANY_CON_ANY) &&
+ (ble_adv_params->adv_filter_policy > ADV_ALLOW_SCAN_WLST_CON_WLST) )
+ {
+ LOG_ERROR("Invalid advertisting type parameters.\n");
+ return;
+ }
+
+ LOG_ERROR("API_Ble_AppStartAdvertising\n");
+
+ ///
+ BTA_DmSetBleAdvParamsAll(ble_adv_params->adv_int_min,
+ ble_adv_params->adv_int_max,
+ ble_adv_params->adv_type,
+ ble_adv_params->addr_type_own,
+ ble_adv_params->channel_map,
+ ble_adv_params->adv_filter_policy,
+ ble_adv_params->p_dir_bda);
+
+
+}
+
+
+/*******************************************************************************
+**
+** @function esp_ble_set_scan_params
+**
+** @brief This function is called to set scan parameters
+**
+** @param[in] esp_ble_scan_params: Pointer to User defined scan_params data structure. This
+** memory space can not be freed until scan_param_setup_cback
+** @param[in] client_if: Client interface ID
+** @param[in|out] scan_param_setup_status_cback - Set scan param status callback
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_set_scan_params (esp_ble_scan_params *scan_params, esp_gattc_if_t client_if,
+ esp_scan_param_setup_cb_t scan_param_setup_cback)
+{
+ if (API_BLE_ISVALID_PARAM(scan_params->scan_intv, BTM_BLE_SCAN_INT_MIN, BTM_BLE_SCAN_INT_MAX) &&
+ API_BLE_ISVALID_PARAM(scan_params->scan_win, BTM_BLE_SCAN_WIN_MIN, BTM_BLE_SCAN_WIN_MAX) &&
+ (scan_params->scan_type == BTM_BLE_SCAN_MODE_ACTI || scan_params->scan_type == BTM_BLE_SCAN_MODE_PASS))
+ {
+ BTA_DmSetBleScanFilterParams(client_if,
+ scan_params->scan_intv,
+ scan_params->scan_win,
+ scan_params->scan_type,
+ scan_params->scan_fil_policy,
+ scan_params->addr_type_own,
+ scan_param_setup_cback);
+ }
+}
+
+
+/*******************************************************************************
+**
+** @function esp_ble_start_scanning
+**
+** @brief This procedure keep the device scanning the peer device whith advertising on the air
+**
+** @param[in] duration: Keeping the scaning time, the unit is second.
+** @param[in|out] results_cb: The scanning function callback when the peer device has been scan
+** which advertising on the air
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_start_scanning (UINT8 duration, esp_dm_search_cb_t *results_cb)
+{
+ if((duration != 0) && (results_cb != NULL))
+ {
+ ///Start scan the device
+ BTA_DmBleObserve(true, duration, results_cb);
+ }else{
+ LOG_ERROR("The scan duration or p_results_cb invalid\n");
+ }
+}
+
+
+/*******************************************************************************
+**
+** @function esp_ble_stop_advertising
+**
+** @brief This function is called to stop advertising.
+**
+** @param None
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_stop_advertising (void)
+{
+ bool stop_adv = false;
+
+ BTA_DmBleBroadcast(stop_adv);
+}
+
+
+
#include "btm_ble_api.h"
//#include "btm_ble_int.h"
-
-
-/*******************************************************************************
-**
-** @function esp_ble_config_adv_data
-**
-** @brief This function is called to override the BTA default ADV parameters.
-**
-** @param[in] adv_data: Pointer to User defined ADV data structure. This
-** memory space can not be freed until p_adv_data_cback
-** is received.
-** @param[in|out] adv_data_cback: set adv data complete callback.
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_config_adv_data (esp_ble_adv_data_cfg_t *adv_data,
- esp_ble_set_adv_data_cmpl_cb_t *adv_data_cback)
-{
- if(adv_data != NULL)
- {
- ble_config_adv_data(adv_data, adv_data_cback);
- }else{
- LOG_ERROR("The adv_data is NULL\n");
- }
-
- if(++adv_data != NULL)
- {
- ble_set_scan_rsp(adv_data, NULL);
- }
-
-}
-
-
-/*******************************************************************************
-**
-** @function esp_ble_start_advertising
-**
-** @brief This function is called to start advertising.
-**
-** @param[in] esp_ble_adv_params_all_t: ointer to User defined adv_params data structure.
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_start_advertising (esp_ble_adv_params_all_t *ble_adv_params)
-{
- if (!API_BLE_ISVALID_PARAM(ble_adv_params->adv_int_min, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX) ||
- !API_BLE_ISVALID_PARAM(ble_adv_params->adv_int_max, BTM_BLE_ADV_INT_MIN, BTM_BLE_ADV_INT_MAX))
- {
- LOG_ERROR("Invalid advertisting interval parameters.\n");
- return ;
- }
-
- if ((ble_adv_params->adv_type < API_NON_DISCOVERABLE) &&
- (ble_adv_params->adv_type > API_BROADCASTER_MODE) )
- {
- LOG_ERROR("Invalid advertisting type parameters.\n");
- return;
- }
-
- if ((ble_adv_params->adv_filter_policy < ADV_ALLOW_SCAN_ANY_CON_ANY) &&
- (ble_adv_params->adv_filter_policy > ADV_ALLOW_SCAN_WLST_CON_WLST) )
- {
- LOG_ERROR("Invalid advertisting type parameters.\n");
- return;
- }
-
- LOG_ERROR("API_Ble_AppStartAdvertising\n");
-
- ///
- BTA_DmSetBleAdvParamsAll(ble_adv_params->adv_int_min,
- ble_adv_params->adv_int_max,
- ble_adv_params->adv_type,
- ble_adv_params->addr_type_own,
- ble_adv_params->channel_map,
- ble_adv_params->adv_filter_policy,
- ble_adv_params->p_dir_bda);
-
-
-}
-
-
-/*******************************************************************************
-**
-** @function esp_ble_set_scan_params
-**
-** @brief This function is called to set scan parameters
-**
-** @param[in] esp_ble_scan_params: Pointer to User defined scan_params data structure. This
-** memory space can not be freed until scan_param_setup_cback
-** @param[in] client_if: Client interface ID
-** @param[in|out] scan_param_setup_status_cback - Set scan param status callback
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_set_scan_params (esp_ble_scan_params *scan_params, esp_gattc_if_t client_if,
- esp_scan_param_setup_cb_t scan_param_setup_cback)
-{
- if (API_BLE_ISVALID_PARAM(scan_params->scan_intv, BTM_BLE_SCAN_INT_MIN, BTM_BLE_SCAN_INT_MAX) &&
- API_BLE_ISVALID_PARAM(scan_params->scan_win, BTM_BLE_SCAN_WIN_MIN, BTM_BLE_SCAN_WIN_MAX) &&
- (scan_params->scan_type == BTM_BLE_SCAN_MODE_ACTI || scan_params->scan_type == BTM_BLE_SCAN_MODE_PASS))
- {
- BTA_DmSetBleScanFilterParams(client_if,
- scan_params->scan_intv,
- scan_params->scan_win,
- scan_params->scan_type,
- scan_params->scan_fil_policy,
- scan_params->addr_type_own,
- scan_param_setup_cback);
- }
-}
-
-
-/*******************************************************************************
-**
-** @function esp_ble_start_scanning
-**
-** @brief This procedure keep the device scanning the peer device whith advertising on the air
-**
-** @param[in] duration: Keeping the scaning time, the unit is second.
-** @param[in|out] results_cb: The scanning function callback when the peer device has been scan
-** which advertising on the air
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_start_scanning (UINT8 duration, esp_dm_search_cb_t *results_cb)
-{
- if((duration != 0) && (results_cb != NULL))
- {
- ///Start scan the device
- BTA_DmBleObserve(true, duration, results_cb);
- }else{
- LOG_ERROR("The scan duration or p_results_cb invalid\n");
- }
-}
-
-
-/*******************************************************************************
-**
-** @function esp_ble_stop_advertising
-**
-** @brief This function is called to stop advertising.
-**
-** @param None
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_stop_advertising (void)
-{
- bool stop_adv = false;
-
- BTA_DmBleBroadcast(stop_adv);
-}
-
-
/*******************************************************************************
**
** @function esp_ble_update_conn_params
--- /dev/null
+#ifndef __ESP_ADV_API_H__
+#define __ESP_ADV_API_H__
+
+#include "bt_types.h"
+#include "esp_bt_defs.h"
+#include "bta_gatt_api.h"
+#include "bt_prf_sys.h"
+
+
+/*******************************************************************************
+**
+** @function esp_ble_config_adv_data
+**
+** @brief This function is called to override the BTA default ADV parameters.
+**
+** @param[in] adv_data: Pointer to User defined ADV data structure. This
+** memory space can not be freed until p_adv_data_cback
+** is received.
+** @param[in|out] adv_data_cback: set adv data complete callback.
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_config_adv_data (esp_ble_adv_data_cfg_t *adv_data,
+ esp_ble_set_adv_data_cmpl_cb_t *adv_data_cback);
+
+
+/*******************************************************************************
+**
+** Function esp_ble_set_scan_rsp
+**
+** Description This function is called to override the app scan response.
+**
+** Parameters Pointer to User defined ADV data structure
+**
+** Returns None
+**
+*******************************************************************************/
+void esp_ble_set_scan_rsp(esp_ble_adv_data_cfg_t *scan_rsp_data,
+ esp_ble_set_adv_data_cmpl_cb_t *p_scan_rsp_data_cback);
+
+
+/*******************************************************************************
+**
+** @function esp_ble_set_scan_params
+**
+** @brief This function is called to set scan parameters
+**
+** @param[in] esp_ble_scan_params: Pointer to User defined scan_params data structure. This
+** memory space can not be freed until scan_param_setup_cback
+** @param[in] client_if: Client interface ID
+** @param[in|out] scan_param_setup_status_cback - Set scan param status callback
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_set_scan_params (esp_ble_scan_params *scan_params, esp_gattc_if_t client_if,
+ esp_scan_param_setup_cb_t scan_param_setup_cback);
+
+
+/*******************************************************************************
+**
+** @function esp_ble_start_scanning
+**
+** @brief This procedure keep the device scanning the peer device whith advertising on the air
+**
+** @param[in] duration: Keeping the scaning time, the unit is second.
+** @param[in|out] results_cb: The scanning function callback when the peer device has been scan
+** which advertising on the air
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_start_scanning (UINT8 duration, esp_dm_search_cb_t *results_cb);
+
+
+
+/*******************************************************************************
+**
+** @function esp_ble_start_advertising
+**
+** @brief This function is called to start advertising.
+**
+** @param[in] esp_ble_adv_params_all_t: ointer to User defined adv_params data structure.
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_start_advertising (esp_ble_adv_params_all_t *ble_adv_params);
+
+
+
+/*******************************************************************************
+**
+** @function esp_ble_stop_advertising
+**
+** @brief This function is called to stop advertising.
+**
+** @param None
+**
+** @return None
+**
+*******************************************************************************/
+void esp_ble_stop_advertising (void);
+
+#endif /* __ESP_ADV_API_H__ */
#include "bt_prf_sys.h"
-/*******************************************************************************
-**
-** @function esp_ble_config_adv_data
-**
-** @brief This function is called to override the BTA default ADV parameters.
-**
-** @param[in] adv_data: Pointer to User defined ADV data structure. This
-** memory space can not be freed until p_adv_data_cback
-** is received.
-** @param[in|out] adv_data_cback: set adv data complete callback.
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_config_adv_data (esp_ble_adv_data_cfg_t *adv_data,
- esp_ble_set_adv_data_cmpl_cb_t *adv_data_cback);
-
-
-
-/*******************************************************************************
-**
-** @function esp_ble_set_scan_params
-**
-** @brief This function is called to set scan parameters
-**
-** @param[in] esp_ble_scan_params: Pointer to User defined scan_params data structure. This
-** memory space can not be freed until scan_param_setup_cback
-** @param[in] client_if: Client interface ID
-** @param[in|out] scan_param_setup_status_cback - Set scan param status callback
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_set_scan_params (esp_ble_scan_params *scan_params, esp_gattc_if_t client_if,
- esp_scan_param_setup_cb_t scan_param_setup_cback);
-
-
-/*******************************************************************************
-**
-** @function esp_ble_start_scanning
-**
-** @brief This procedure keep the device scanning the peer device whith advertising on the air
-**
-** @param[in] duration: Keeping the scaning time, the unit is second.
-** @param[in|out] results_cb: The scanning function callback when the peer device has been scan
-** which advertising on the air
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_start_scanning (UINT8 duration, esp_dm_search_cb_t *results_cb);
-
-
-
-/*******************************************************************************
-**
-** @function esp_ble_start_advertising
-**
-** @brief This function is called to start advertising.
-**
-** @param[in] esp_ble_adv_params_all_t: ointer to User defined adv_params data structure.
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_start_advertising (esp_ble_adv_params_all_t *ble_adv_params);
-
-
-
-/*******************************************************************************
-**
-** @function esp_ble_stop_advertising
-**
-** @brief This function is called to stop advertising.
-**
-** @param None
-**
-** @return None
-**
-*******************************************************************************/
-void esp_ble_stop_advertising (void);
-
-
-
/*******************************************************************************
**
** @function esp_ble_update_conn_params
+++ /dev/null
-// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-
-// http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-#include "esp_bt_defs.h"
-
-
- /*******************************************************************************
- **
- ** Function ESP_AppConfigadvData
- **
- ** Description This function is called to override the BTA default ADV parameters.
- **
- ** adv_data: Pointer to User defined ADV data structure. This
- ** memory space can not be freed until p_adv_data_cback
- ** is received.
- ** p_adv_data_cback: set adv data complete callback.
- **
- ** Returns None
- **
- *******************************************************************************/
- void ble_config_adv_data(esp_ble_adv_data_cfg_t *adv_data,
- tBTA_SET_ADV_DATA_CMPL_CBACK *p_adv_data_cback)
-{
- tBTA_BLE_AD_MASK data_mask = 0;
- if(adv_data->adv_name != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_DEV_NAME;
- BTA_DmSetDeviceName(adv_data->adv_name);
- }
- if(adv_data->ble_adv_data.int_range.low != 0 ||
- adv_data->ble_adv_data.int_range.hi != 0)
- data_mask |= BTM_BLE_AD_BIT_INT_RANGE;
-
- if(adv_data->ble_adv_data.p_manu != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_MANU;
- }
-
- if(adv_data->ble_adv_data.p_services != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE;
- }
-
- if(adv_data->ble_adv_data.p_service_32b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_32;
- }
-
- if(adv_data->ble_adv_data.p_services_128b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_128;
- }
-
- if(adv_data->ble_adv_data.p_sol_services != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_SOL;
- }
-
- if(adv_data->ble_adv_data.p_sol_service_32b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_32SOL;
- }
-
- if(adv_data->ble_adv_data.p_sol_service_128b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_128SOL;
- }
-
- if(adv_data->ble_adv_data.p_service_data != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_DATA;
- }
-
- if(adv_data->ble_adv_data.appearance != 0)
- {
- data_mask |= BTM_BLE_AD_BIT_APPEARANCE;
- }
-
- if(adv_data->ble_adv_data.p_proprietary != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_PROPRIETARY;
- }
-
- if(adv_data->ble_adv_data.tx_power != 0)
- {
- data_mask |= BTM_BLE_AD_BIT_TX_PWR;
- }
-
- BTA_DmBleSetAdvConfig(data_mask, &(adv_data->ble_adv_data), p_adv_data_cback);
-}
-
-
-/*******************************************************************************
-**
-** Function ESP_BleSetScanRsp
-**
-** Description This function is called to override the app scan response.
-**
-** Parameters Pointer to User defined ADV data structure
-**
-** Returns None
-**
-*******************************************************************************/
-void ble_set_scan_rsp(esp_ble_adv_data_cfg_t *scan_rsp_data,
- tBTA_SET_ADV_DATA_CMPL_CBACK *p_scan_rsp_data_cback)
-{
- tBTA_BLE_AD_MASK data_mask = 0;
- if(scan_rsp_data->adv_name != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_DEV_NAME;
- BTA_DmSetDeviceName(scan_rsp_data->adv_name);
- }
- if(scan_rsp_data->ble_adv_data.int_range.low != 0 ||
- scan_rsp_data->ble_adv_data.int_range.hi != 0)
- data_mask |= BTM_BLE_AD_BIT_INT_RANGE;
-
- if(scan_rsp_data->ble_adv_data.p_manu != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_MANU;
- }
-
- if(scan_rsp_data->ble_adv_data.p_services != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE;
- }
-
- if(scan_rsp_data->ble_adv_data.p_service_32b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_32;
- }
-
- if(scan_rsp_data->ble_adv_data.p_services_128b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_128;
- }
-
- if(scan_rsp_data->ble_adv_data.p_sol_services != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_SOL;
- }
-
- if(scan_rsp_data->ble_adv_data.p_sol_service_32b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_32SOL;
- }
-
- if(scan_rsp_data->ble_adv_data.p_sol_service_128b != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_128SOL;
- }
-
- if(scan_rsp_data->ble_adv_data.p_service_data != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_SERVICE_DATA;
- }
-
- if(scan_rsp_data->ble_adv_data.appearance != 0)
- {
- data_mask |= BTM_BLE_AD_BIT_APPEARANCE;
- }
-
- if(scan_rsp_data->ble_adv_data.p_proprietary != NULL)
- {
- data_mask |= BTM_BLE_AD_BIT_PROPRIETARY;
- }
-
- if(scan_rsp_data->ble_adv_data.tx_power != 0)
- {
- data_mask |= BTM_BLE_AD_BIT_TX_PWR;
- }
-
- BTA_DmBleSetScanRsp(data_mask, &(scan_rsp_data->ble_adv_data), p_scan_rsp_data_cback);
-}
-
-
projects / esp-idf / commitdiff