line_strict_phrase:process(dependency){"line_phrase_cj.brk"}
}
extensions{
- // Extensions.
- // Entries in cjdict.txt categorized as particles (助詞), auxiliary verbs (助動詞),
- // conjugations (活用) and prefix of them.
- // These entries are connected to the previous words for phrase based line breaking.
- // https://ja.wikipedia.org/wiki/助詞
- // https://ja.wikipedia.org/wiki/助動詞_(国文法)
- // https://ja.wikipedia.org/wiki/活用
- かい, かしら, から, きり, くらい,
- ぐらい, けれど, けれども, こそ, さえ,
- しか, した, ずつ, せる, せん,
- たい, たがる, たく, たら, たり,
- だけ, だに, だの, だり, つつ,
- てる, です, でも, ところが, ところで,
- とも, ない, なか, ながら, なく,
- なし, なぞ, など, なら, なり,
- なんぞ, ねる, ので, のに, のみ,
- ばかり, へる, ほど, まい, まう,
- まし, ます, まっ, まで, まま,
- もん, やら, よう, より, らしい,
- られる, れる, ろう, わっ, わな,
- わら, わり, わる, われ, わん,
-
- // Entries added for technical reasons (particle + others).
- // Entries in cjdict.txt, which are compound words starting from the above categories
- // (i.e. particles, auxiliary verbs and conjunctions).
- // These entries are connected to the previous words for phrase based line breaking.
- えたい, えて, える, けた, けたい,
- ける, させる, そうだ, っきゃ, っきり,
- っけ, っす, ったらしい, っちゅう, って,
- っていう, ってか, ってな, っと, っぱなし,
- っぷり, っぽい, にあう, にあがる, にあたって,
- にあたり, にあたりまして, にあたります, にあたる, において,
- におきまして, における, にかけ, にかけて, にかけまして,
- にたいして, にたいしまして, にたいします, にたいする, について,
- につき, につきまして, につけ, につれ, につれて,
- にて, にとって, にとり, にとりまして, にまつわります,
- にまつわる, にもかかわらず, にゃ, によって, により,
- によりまして, によります, による, にわたって, にわたり,
- にわたりまして, にわたります, にわたる, に対し, に対して,
- に対しまして, に対します, に対する, に当たって, に当たり,
- に当たりまして, に当たります, に当たる, に従い, に従いまして,
- に従います, に従う, に従って, に関し, に関して,
- に関しまして, に関します, に関する, に際し, に際して,
- ものの, ろうし, ろうと, われと, をの,
- をめぐって, をめぐりまして, をめぐります, をめぐる, をもちまして,
- をもって, を以て, を通して, を通しまして, を通じ,
- を通じて, を通じまして, んじゃ, んで,
-
- // Entries added for technical reasons (noun suffix).
- // Entries in cjdict.txt, which are suffixes of nouns.
- // These entries should be connected to the previous (noun) words.
- 々宮, 々家, え目, が丘, が台,
- が床, が浜, ヵ国, ヵ年, ヵ所,
- ヵ月, ヵ村, ヵ条, ヶ丘, ヶ国,
- ヶ島, ヶ年, ヶ所, ヶ月, ヶ村,
- ヶ条, ージ, ーズ, ータ, ード,
- ーニャ, ープランス, ーユ, ーランド, ーリンズ,
- ーン,
+ "かい",
+ "かしら",
+ "から",
+ "きり",
+ "くらい",
+ "ぐらい",
+ "けれど",
+ "けれども",
+ "こそ",
+ "さえ",
+ "しか",
+ "した",
+ "ずつ",
+ "せる",
+ "せん",
+ "たい",
+ "たがる",
+ "たく",
+ "たら",
+ "たり",
+ "だけ",
+ "だに",
+ "だの",
+ "だり",
+ "つつ",
+ "てる",
+ "です",
+ "でも",
+ "ところが",
+ "ところで",
+ "とも",
+ "ない",
+ "なか",
+ "ながら",
+ "なく",
+ "なし",
+ "なぞ",
+ "など",
+ "なら",
+ "なり",
+ "なんぞ",
+ "ねる",
+ "ので",
+ "のに",
+ "のみ",
+ "ばかり",
+ "へる",
+ "ほど",
+ "まい",
+ "まう",
+ "まし",
+ "ます",
+ "まっ",
+ "まで",
+ "まま",
+ "もん",
+ "やら",
+ "よう",
+ "より",
+ "らしい",
+ "られる",
+ "れる",
+ "ろう",
+ "わっ",
+ "わな",
+ "わら",
+ "わり",
+ "わる",
+ "われ",
+ "わん",
+ "えたい",
+ "えて",
+ "える",
+ "けた",
+ "けたい",
+ "ける",
+ "させる",
+ "そうだ",
+ "っきゃ",
+ "っきり",
+ "っけ",
+ "っす",
+ "ったらしい",
+ "っちゅう",
+ "って",
+ "っていう",
+ "ってか",
+ "ってな",
+ "っと",
+ "っぱなし",
+ "っぷり",
+ "っぽい",
+ "にあう",
+ "にあがる",
+ "にあたって",
+ "にあたり",
+ "にあたりまして",
+ "にあたります",
+ "にあたる",
+ "において",
+ "におきまして",
+ "における",
+ "にかけ",
+ "にかけて",
+ "にかけまして",
+ "にたいして",
+ "にたいしまして",
+ "にたいします",
+ "にたいする",
+ "について",
+ "につき",
+ "につきまして",
+ "につけ",
+ "につれ",
+ "につれて",
+ "にて",
+ "にとって",
+ "にとり",
+ "にとりまして",
+ "にまつわります",
+ "にまつわる",
+ "にもかかわらず",
+ "にゃ",
+ "によって",
+ "により",
+ "によりまして",
+ "によります",
+ "による",
+ "にわたって",
+ "にわたり",
+ "にわたりまして",
+ "にわたります",
+ "にわたる",
+ "に対し",
+ "に対して",
+ "に対しまして",
+ "に対します",
+ "に対する",
+ "に当たって",
+ "に当たり",
+ "に当たりまして",
+ "に当たります",
+ "に当たる",
+ "に従い",
+ "に従いまして",
+ "に従います",
+ "に従う",
+ "に従って",
+ "に関し",
+ "に関して",
+ "に関しまして",
+ "に関します",
+ "に関する",
+ "に際し",
+ "に際して",
+ "ものの",
+ "ろうし",
+ "ろうと",
+ "われと",
+ "をの",
+ "をめぐって",
+ "をめぐりまして",
+ "をめぐります",
+ "をめぐる",
+ "をもちまして",
+ "をもって",
+ "を以て",
+ "を通して",
+ "を通しまして",
+ "を通じ",
+ "を通じて",
+ "を通じまして",
+ "んじゃ",
+ "んで",
+ "々宮",
+ "々家",
+ "え目",
+ "が丘",
+ "が台",
+ "が床",
+ "が浜",
+ "ヵ国",
+ "ヵ年",
+ "ヵ所",
+ "ヵ月",
+ "ヵ村",
+ "ヵ条",
+ "ヶ丘",
+ "ヶ国",
+ "ヶ島",
+ "ヶ年",
+ "ヶ所",
+ "ヶ月",
+ "ヶ村",
+ "ヶ条",
+ "ージ",
+ "ーズ",
+ "ータ",
+ "ード",
+ "ーニャ",
+ "ープランス",
+ "ーユ",
+ "ーランド",
+ "ーリンズ",
+ "ーン",
}
}
export ICU4J_ROOT=$HOME/icu-myfork/icu4j
export TOOLS_ROOT=$HOME/icu-myfork/tools
-# 2. Build and install the CLDR jar
+# 1d. Directory for logs/notes (create if does not exist)
-cd $TOOLS_ROOT/cldr
-ant install-cldr-libs
-
-See the $TOOLS_ROOT/cldr/lib/README.txt file for more information on the CLDR
-jar and the install-cldr-jars.sh script.
+export NOTES=...(some directory)...
+mkdir -p $NOTES
-# 3. Configure ICU4C, build and test without new data first, to verify that
+# 2a. Configure ICU4C, build and test without new data first, to verify that
# there are no pre-existing errors. Here <platform> is the runConfigureICU
# code for the platform you are building, e.g. Linux, MacOSX, Cygwin.
+# (optionally build with debug enabled)
cd $ICU4C_DIR/source
-./runConfigureICU <platform>
+./runConfigureICU
[--enable-debug] <platform>
make clean
-make check 2>&1 | tee /tmp/icu4c-oldData-makeCheck.txt
+make check 2>&1 | tee $NOTES/icu4c-oldData-makeCheck.txt
+
+# 2b. Now with ICU4J, build and test without new data first, to verify that
+# there are no pre-existing errors (or at least to have the pre-existing errors
+# as a base for comparison):
-# 4a. Generate the CLDR production data. This process uses ant with ICU's
+cd $ICU4J_ROOT
+ant clean
+ant check 2>&1 | tee $NOTES/icu4j-oldData-antCheck.txt
+
+# 3. Make pre-adjustments as necessary
+# 3a. Copy latest relevant CLDR dtds to ICU
+cp -p $CLDR_DIR/common/dtd/ldml.dtd $ICU4C_DIR/source/data/dtd/cldr/common/dtd/
+cp -p $CLDR_DIR/common/dtd/ldmlICU.dtd $ICU4C_DIR/source/data/dtd/cldr/common/dtd/
+
+# 3b. Update the cldr-icu tooling to use the latest tagged version of ICU
+open $TOOLS_ROOT/cldr/cldr-to-icu/pom.xml
+# search for icu4j-for-cldr and update to the latest tagged version per instructions
+
+# 3c. Update the build for any new icu version, added locales, etc.
+open $TOOLS_ROOT/cldr/cldr-to-icu/build-icu-data.xml
+# update icuVersion, icuDataVersion if necessary
+# update lists of locales to include if necessary
+
+# 4. Build and install the CLDR jar
+
+cd $TOOLS_ROOT/cldr
+ant install-cldr-libs
+
+See the $TOOLS_ROOT/cldr/lib/README.txt file for more information on the CLDR
+jar and the install-cldr-jars.sh script.
+
+# 5a. Generate the CLDR production data. This process uses ant with ICU's
# data/build.xml
#
# Running "ant cleanprod" is necessary to clean out the production data directory
cd $ICU4C_DIR/source/data
ant cleanprod
ant setup
-ant proddata 2>&1 | tee /tmp/cldr-newData-proddataLog.txt
+ant proddata 2>&1 | tee $NOTES/cldr-newData-proddataLog.txt
-# 4b. Build the new ICU4C data files; these include .txt files and .py files.
+# 5b. Build the new ICU4C data files; these include .txt files and .py files.
# These new files will replace whatever was already present in the ICU4C sources.
# This process uses the LdmlConverter in $TOOLS_ROOT/cldr/cldr-to-icu/;
# see $TOOLS_ROOT/cldr/cldr-to-icu/README.txt
# build-icu-data.xml file, such as adding new locales etc.
cd $TOOLS_ROOT/cldr/cldr-to-icu
-ant -f build-icu-data.xml -DcldrDataDir="$CLDR_TMP_DIR/production" | tee /tmp/cldr-newData-builddataLog.txt
+ant -f build-icu-data.xml -DcldrDataDir="$CLDR_TMP_DIR/production" | tee $NOTES/cldr-newData-builddataLog.txt
-# 4c. Update the CLDR testData files needed by ICU4C and ICU4J tests, ensuring
+# 5c. Update the CLDR testData files needed by ICU4C and ICU4J tests, ensuring
# they're representative of the newest CLDR data.
cd $TOOLS_ROOT/cldr
ant copy-cldr-testdata
-# 4d. Copy from CLDR common/testData/localeIdentifiers/localeCanonicalization.txt
+# 5d. Copy from CLDR common/testData/localeIdentifiers/localeCanonicalization.txt
# into icu4c/source/test/testdata/localeCanonicalization.txt
# and icu4j/main/tests/core/src/com/ibm/icu/dev/data/unicode/localeCanonicalization.txt
# and add the following line to the beginning of these two files
# # File copied from cldr common/testData/localeIdentifiers/localeCanonicalization.txt
-# 4e. For the time being, manually re-add the lstm entries in data/brkitr/root.txt
+# 5e. For the time being, manually re-add the lstm entries in data/brkitr/root.txt
open $ICU4C_DIR/source/data/brkitr/root.txt
# paste the following block after the dictionaries block and before the final closing '}':
Mymr{"Burmese_graphclust_model5_heavy.res"}
}
-# 4f. And the time being (work is in progress to generate the below from CLDR data),
-# manually re-add the extensions entries in data/brkitr/ja.txt
-open $ICU4C_DIR/source/data/brkitr/ja.txt
-
-# copy in the extensions data from the current version...
-
-# and delete any bogus extensions data that ended up in $ICU4C_DIR/source/data/locales/ja.txt
-
-# 5. Check which data files have modifications, which have been added or removed
+# 6. Check which data files have modifications, which have been added or removed
# (if there are no changes, you may not need to proceed further). Make sure the
# list seems reasonable.
-cd $ICU4C_DIR/source/data
+cd $ICU4C_DIR/..
git status
-# 5a. You may also want to check which files were modified in CLDR production data:
+# 6a. You may also want to check which files were modified in CLDR production data:
cd $CLDR_TMP_DIR
git status
-# 6. Fix any errors, investigate any warnings.
+# 7. Fix any errors, investigate any warnings.
#
# Fixing may entail modifying CLDR source data or TOOLS_ROOT config files or
# tooling.
-# 7. Now rebuild ICU4C with the new data and run make check tests.
+# 8. Now rebuild ICU4C with the new data and run make check tests.
# Again, keep a log so you can investigate the errors.
cd $ICU4C_DIR/source
-# 7a. If any files were added or removed (likely), re-run configure:
-./runConfigureICU <platform>
+# 8a. If any files were added or removed (likely), re-run configure:
+./runConfigureICU
[--enable-debug] <platform>
make clean
-# 7b. Now do the rebuild.
-make check 2>&1 | tee /tmp/icu4c-newData-makeCheck.txt
+# 8b. Now do the rebuild.
+make check 2>&1 | tee $NOTES/icu4c-newData-makeCheck.txt
-# 8. Investigate each test case failure. The first run processing new CLDR data
+# 9. Investigate each test case failure. The first run processing new CLDR data
# from the Survey Tool can result in thousands of failures (in many cases, one
# CLDR data fix can resolve hundreds of test failures). If the error is caused
# by bad CLDR data, then file a CLDR bug, fix the data, and regenerate from
# Note that if the new data has any differences in structure, you will have to
# update test/testdata/structLocale.txt or /tsutil/cldrtest/TestLocaleStructure
# may fail.
-# Repeat steps 4-7 until there are no errors.
+# Repeat steps 4-8 until there are no errors.
-# 9. You can also run the make check tests in exhaustive mode. As an alternative
+# 10. You can also run the make check tests in exhaustive mode. As an alternative
# you can run them as part of the pre-merge tests by adding the following as a
# comment in the pull request: "/azp run CI-Exhaustive". You should do one or the
# other; the exhaustive tests are *not* run automatically on each pull request,
cd $ICU4C_DIR/source
export INTLTEST_OPTS="-e"
export CINTLTST_OPTS="-e"
-make check 2>&1 | tee /tmp/icu4c-newData-makeCheckEx.txt
+make check 2>&1 | tee $NOTES/icu4c-newData-makeCheckEx.txt
-# 10. Again, investigate each failure, fixing CLDR data or ICU test cases as
-# appropriate, and repeating steps 4-7 and 9 until there are no errors.
-
-# 11. Now with ICU4J, build and test without new data first, to verify that
-# there are no pre-existing errors (or at least to have the pre-existing errors
-# as a base for comparison):
-
-cd $ICU4J_ROOT
-ant check 2>&1 | tee /tmp/icu4j-oldData-antCheck.txt
+# 11. Again, investigate each failure, fixing CLDR data or ICU test cases as
+# appropriate, and repeating steps 4-8 and 10 until there are no errors.
# 12. Transfer the data to ICU4J:
cd $ICU4C_DIR/source
# Keep a log so you can investigate the errors.
cd $ICU4J_ROOT
-ant check 2>&1 | tee /tmp/icu4j-newData-antCheck.txt
+ant check 2>&1 | tee $NOTES/icu4j-newData-antCheck.txt
# 14. Investigate test case failures; fix test cases and repeat from step 12,
# or fix CLDR data and repeat from step 4, as appropriate, until there are no
<!ELEMENT icu:extensions (alias | (icu:extension*)) >
<!ELEMENT icu:extension ( #PCDATA ) >
+ <!--@ORDERED-->
<!ELEMENT icu:lstm (alias | (icu:lstmdata*)) >
%%Parent{"root"}
AuxExemplarCharacters{"[\u200C\u200D]"}
ExemplarCharacters{
- "[\u093C \u0901 अ आ इ ई उ ऊ ए ऑ ओ क ख ग च {च\u093C} छ {छ\u093C} ज ट ठ ड त थ द"
- " न प फ ब म य र ल व श स ह ा ि ी \u0941 \u0942 \u0943 \u0944 \u0945 \u0947 "
- "\u0948 ॉ ो ौ \u094D]"
+ "[\u093C \u0902 \u0901 अ आ इ ई उ ऊ ए ऑ ओ क ख ग च {च\u093C} छ {छ\u093C} ज ट ठ "
+ "ड त थ द न प फ ब म य र ल व श स ह ा ि ी \u0941 \u0942 \u0943 \u0944 \u0945 "
+ "\u0947 \u0948 ॉ ो ौ \u094D]"
}
ExemplarCharactersNumbers{"[\\- ‑ , . % ‰ + 0 1 2 3 4 5 6 7 8 9]"}
ExemplarCharactersPunctuation{
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2013-2016 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2013-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2013-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
License & terms of use: http://www.unicode.org/copyright.html
Copyright (c) 2010-2015 International Business Machines Corporation and others. All rights reserved.
-->
-<!DOCTYPE ldml SYSTEM "../../dtd/cldr-40/common/dtd/ldml.dtd">
+<!DOCTYPE ldml SYSTEM "../../dtd/cldr/common/dtd/ldml.dtd">
<ldml>
<identity>
<version number="$Revision$"/>
version https://git-lfs.github.com/spec/v1
-oid sha256:62f6bb6255440bed5ea35dd659ba59dc4d3034ecfd53fae6790be0fcbc3f9eff
+oid sha256:cc20943a393a23436ebb1ffccfdb299519c546a9628f8be13ceacee2789507e0
size 13873153
version https://git-lfs.github.com/spec/v1
-oid sha256:379538ae9348bb63b1a4f1c1314f1513acadd72c6b9630af8dc9e4cc0465ea57
+oid sha256:cb858bb84720a72c1382276b53c94454ae959b1cddd3acbf2918cb75277b4320
size 96439
version https://git-lfs.github.com/spec/v1
-oid sha256:67aa8c24114eb601f3fa722c490dd07fe236a1205591e6672706e7d93c5e4767
+oid sha256:a8fc1bdc460e1d48141c46baff1ff00e003350b892cca78a89a11152c04e6a1a
size 826063
}
private void addSuppression(CldrValue v) {
- //System.out.println("addSegmentation: " + v.toString()); // debug
+ //System.out.println("addSuppression: " + v.toString()); // debug
String type = SEGMENTATION_TYPE.valueFrom(v);
// TODO: Understand and document why we escape values here, but not for collation data.
icuData.add(
projects / icu / commitdiff