$! build everything.
$!
$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE
$! ALL To do both LIBRARY and APPS
$!
$! Specify DEBUG or NODEBUG as P2 to compile with or without debugger
$ OPT_FILE = ""
$ POINTER_SIZE = ""
$!
-$! Define The Different Encryption Types.
-$! NOTE: Some might think this list ugly. However, it's made this way to
-$! reflect the SDIRS variable in [-]Makefile.org as closely as possible,
-$! thereby making it fairly easy to verify that the lists are the same.
-$!
-$ ET_WHIRLPOOL = "WHRLPOOL"
-$ IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = ""
-$ ENCRYPT_TYPES = "Basic,"+ -
- "OBJECTS,"+ -
- "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
- "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
- "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ -
- "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
- "EVP,EVP_2,EVP_3,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
- "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ -
- "CMS,PQUEUE,TS,JPAKE,SRP,STORE,CMAC"
+$! Check if there's a SDIRS variable defined
+$!
+$ IF "''SDIRS'" .NES. ""
+$ THEN
+$!
+$! If SDIRS was defined, define ENCRYPT_TYPES from it
+$!
+$ ENCRYPT_TYPES = "Basic,''SDIRS'"
+$!
+$! Otherwise
+$!
+$ ELSE
+$!
+$! Define The Different Encryption Types.
+$! NOTE: Some might think this list ugly. However, it's made this way to
+$! reflect the SDIRS variable in [-]Makefile.org as closely as possible,
+$! thereby making it fairly easy to verify that the lists are the same.
+$!
+$ ET_WHIRLPOOL = "WHRLPOOL"
+$ IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = ""
+$ ENCRYPT_TYPES = "Basic,"+ -
+ "OBJECTS,"+ -
+ "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
+ "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
+ "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ -
+ "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
+ "EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ -
+ "CMS,PQUEUE,TS,JPAKE,SRP,STORE,CMAC"
+$ ENDIF
$!
$! Check To Make Sure We Have Valid Command Line Parameters.
$!
$!
$! Define The Different Encryption "library" Strings.
$!
-$ APPS_DES = "DES/DES,CBC3_ENC"
-$ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
-$
$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,cpt_err,"+ -
"ebcdic,uid,o_time,o_str,o_dir,thr_id,lock,fips_ers,"+ -
"o_init,o_fips"
+$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
$ LIB_MD2 = "md2_dgst,md2_one"
$ LIB_MD4 = "md4_dgst,md4_one"
$ LIB_MD5 = "md5_dgst,md5_one"
-$ LIB_SHA = "sha_dgst,sha1dgst,sha_one,sha1_one,sha256,sha512"
+$ LIB_SHA = "sha1dgst,sha1_one,sha256,sha512"
$ LIB_MDC2 = "mdc2dgst,mdc2_one"
$ LIB_HMAC = "hmac,hm_ameth,hm_pmeth"
$ LIB_RIPEMD = "rmd_dgst,rmd_one"
"ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ -
"des_enc,fcrypt_b,"+ -
"fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ -
- "ede_cbcm_enc,des_old,des_old2,read2pwd"
+ "des_old,des_old2,read2pwd"
+$ LIB_AES = "aes_misc,aes_ecb,aes_cfb,aes_ofb,aes_ige,aes_wrap,"+ -
+ "aes_core,aes_cbc"
$ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64"
-$ LIB_RC4 = "rc4_skey,rc4_enc"
+$ LIB_RC4 = "rc4_enc,rc4_skey"
$ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64"
$ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey"
$ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64"
$ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
-$ LIB_CAMELLIA = "camellia,cmll_misc,cmll_ecb,cmll_cbc,cmll_ofb,"+ -
- "cmll_cfb,cmll_ctr"
+$ LIB_CAMELLIA = "cmll_ecb,cmll_ofb,cmll_cfb,cmll_ctr,camellia,cmll_misc,cmll_cbc"
$ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb"
$ LIB_MODES = "cbc128,ctr128,cts128,cfb128,ofb128,gcm128,"+ -
- "ccm128,xts128"
+ "ccm128,xts128,wrap128,ocb128"
$ LIB_BN_ASM = "[.asm]vms.mar,vms-helper"
$ IF F$TRNLNM("OPENSSL_NO_ASM") .OR. ARCH .NES. "VAX" THEN -
LIB_BN_ASM = "bn_asm"
"bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ -
"bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ -
"bn_recp,bn_mont,bn_mpi,bn_exp2,bn_gf2m,bn_nist,"+ -
- "bn_depr,bn_const,bn_x931p"
+ "bn_depr,bn_const,bn_x931p,bn_intern,bn_dh,bn_srp"
$ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_nist,ec_cvt,ec_mult,"+ -
"ec_err,ec_curve,ec_check,ec_print,ec_asn1,ec_key,"+ -
"ec2_smpl,ec2_mult,ec_ameth,ec_pmeth,eck_prn,"+ -
"dsa_err,dsa_ossl,dsa_depr,dsa_ameth,dsa_pmeth,dsa_prn"
$ LIB_ECDSA = "ecs_lib,ecs_asn1,ecs_ossl,ecs_sign,ecs_vrf,ecs_err"
$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr,"+ -
- "dh_ameth,dh_pmeth,dh_prn,dh_rfc5114"
-$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err"
+ "dh_ameth,dh_pmeth,dh_prn,dh_rfc5114,dh_kdf"
+$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err,ech_kdf"
$ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
- "dso_openssl,dso_win32,dso_vms,dso_beos"
+ "dso_openssl,dso_win32,dso_vms"
$ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ -
"eng_table,eng_pkey,eng_fat,eng_all,"+ -
"tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ -
"tb_cipher,tb_digest,tb_pkmeth,tb_asnmth,"+ -
- "eng_openssl,eng_dyn,eng_cnf,eng_cryptodev,"+ -
- "eng_rsax,eng_rdrand"
-$ LIB_AES = "aes_core,aes_misc,aes_ecb,aes_cbc,aes_cfb,aes_ofb,"+ -
- "aes_ige,aes_wrap"
+ "eng_openssl,eng_cnf,eng_dyn,eng_cryptodev,"+ -
+ "eng_rdrand"
$ LIB_BUFFER = "buffer,buf_str,buf_err"
$ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
"bss_mem,bss_null,bss_fd,"+ -
"bss_file,bss_sock,bss_conn,"+ -
"bf_null,bf_buff,b_print,b_dump,"+ -
- "b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio,bss_log,"+ -
+ "b_sock,bss_acpt,bf_nbio,bss_log,bss_bio,"+ -
"bss_dgram,"+ -
- "bf_lbuf"
+ "bf_lbuf,bss_rtcp" ! The last two are VMS specific
$ LIB_STACK = "stack"
$ LIB_LHASH = "lhash,lh_stats"
$ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ -
- "rand_vms"
+ "rand_win,rand_unix,rand_vms,rand_os2,rand_nw"
$ LIB_ERR = "err,err_all,err_prn"
-$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
-$ LIB_EVP = "encode,digest,evp_enc,evp_key,evp_acnf,evp_cnf,"+ -
+$ LIB_EVP_1 = "encode,digest,evp_enc,evp_key,evp_acnf,evp_cnf,"+ -
"e_des,e_bf,e_idea,e_des3,e_camellia,"+ -
"e_rc4,e_aes,names,e_seed,"+ -
"e_xcbc_d,e_rc2,e_cast,e_rc5"
-$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha,m_sha1,m_wp," + -
- "m_dss,m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ -
+$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha1,m_wp," + -
+ "m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ -
"p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ -
"bio_md,bio_b64,bio_enc,evp_err,e_null,"+ -
"c_all,c_allc,c_alld,evp_lib,bio_ok,"+-
"evp_pkey,evp_pbe,p5_crpt,p5_crpt2"
$ LIB_EVP_3 = "e_old,pmeth_lib,pmeth_fn,pmeth_gn,m_sigver,"+ -
- "e_aes_cbc_hmac_sha1,e_rc4_hmac_md5"
-$ LIB_ASN1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
+ "e_aes_cbc_hmac_sha1,e_aes_cbc_hmac_sha256,e_rc4_hmac_md5"
+$ LIB_ASN1_1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
"a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ -
"a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ -
"x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ -
"f_int,f_string,n_pkey,"+ -
"f_enum,x_pkey,a_bool,x_exten,bio_asn1,bio_ndef,asn_mime,"+ -
"asn1_gen,asn1_par,asn1_lib,asn1_err,a_bytes,a_strnid,"+ -
- "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid"
+ "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid,"+ -
+ "asn_mstbl"
$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ -
"pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey,pvkfmt"
$ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ -
$ LIB_KRB5 = "krb5_asn"
$ LIB_CMS = "cms_lib,cms_asn1,cms_att,cms_io,cms_smime,cms_err,"+ -
"cms_sd,cms_dd,cms_cd,cms_env,cms_enc,cms_ess,"+ -
- "cms_pwri"
+ "cms_pwri,cms_kari"
$ LIB_PQUEUE = "pqueue"
$ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ -
"ts_rsp_sign,ts_rsp_verify,ts_verify_ctx,ts_lib,ts_conf,"+ -
$! Extract The Module Name From The Encryption List.
$!
$ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES)
-$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
-$ MODULE_NAME1 = MODULE_NAME
$!
$! Check To See If We Are At The End Of The Module List.
$!
$! Increment The Moudle Counter.
$!
$ MODULE_COUNTER = MODULE_COUNTER + 1
+$
+$ IF MODULE_NAME.EQS."" THEN GOTO MODULE_NEXT
+$ MODULE_NAME1 = MODULE_NAME
+$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
$!
-$! Create The Library and Apps Module Names.
+$! Check if the library module name actually is defined
$!
-$ LIB_MODULE = "LIB_" + MODULE_NAME
-$ APPS_MODULE = "APPS_" + MODULE_NAME
-$ IF (F$EXTRACT(0,5,MODULE_NAME).EQS."ASN1_")
-$ THEN
-$ MODULE_NAME = "ASN1"
-$ ENDIF
-$ IF (F$EXTRACT(0,4,MODULE_NAME).EQS."EVP_")
+$ PART_COUNTER = -1
+$ IF F$TYPE(LIB_'MODULE_NAME'_1) .NES. ""
$ THEN
-$ MODULE_NAME = "EVP"
+$ PART_COUNTER = 1
+$ ELSE
+$ IF F$TYPE(LIB_'MODULE_NAME') .EQS. ""
+$ THEN
+$ WRITE SYS$ERROR ""
+$ WRITE SYS$ERROR "The module ",MODULE_NAME1," does not exist. Continuing..."
+$ WRITE SYS$ERROR ""
+$ GOTO MODULE_NEXT
+$ ENDIF
$ ENDIF
$!
-$! Set state (can be LIB and APPS)
+$! Tell The User What Module We Are Building.
$!
-$ STATE = "LIB"
-$ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS"
+$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,")"
$!
-$! Check if the library module name actually is defined
+$! Create The Library Module Names.
$!
-$ IF F$TYPE('LIB_MODULE') .EQS. ""
+$ PART_NEXT:
+$ IF PART_COUNTER .EQ. 0 THEN GOTO MODULE_NEXT
+$
+$ IF PART_COUNTER .LT. 0
$ THEN
-$ WRITE SYS$ERROR ""
-$ WRITE SYS$ERROR "The module ",MODULE_NAME1," does not exist. Continuing..."
-$ WRITE SYS$ERROR ""
-$ GOTO MODULE_NEXT
+$ LIB_MODULE = "LIB_" + MODULE_NAME
+$ ELSE
+$ LIB_MODULE = "LIB_" + MODULE_NAME + "_''PART_COUNTER'"
$ ENDIF
$!
-$! Top Of The Module Loop.
+$! If there are no more parts, go to the next module
$!
-$ MODULE_AGAIN:
+$ IF F$TYPE('LIB_MODULE') .EQS. "" THEN GOTO MODULE_NEXT
$!
-$! Tell The User What Module We Are Building.
+$! Increment The Counter.
$!
-$ IF (MODULE_NAME1.NES."")
-$ THEN
-$ IF STATE .EQS. "LIB"
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")"
-$ ELSE IF F$TYPE('APPS_MODULE') .NES. ""
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")"
-$ ENDIF
-$ ENDIF
-$ ENDIF
+$ PART_COUNTER = PART_COUNTER + 1
$!
$! Define A File Counter And Set It To "0".
$!
$ FILE_COUNTER = 0
-$ APPLICATION = ""
-$ APPLICATION_COUNTER = 0
$!
$! Top Of The File Loop.
$!
$ NEXT_FILE:
$!
-$! Look in the LIB_MODULE is we're in state LIB
-$!
-$ IF STATE .EQS. "LIB"
-$ THEN
-$!
-$! O.K, Extract The File Name From The File List.
-$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
+$! Extract The File Name From The File List.
$!
-$! else
-$!
-$ ELSE
-$ FILE_NAME = ","
-$!
-$ IF F$TYPE('APPS_MODULE') .NES. ""
-$ THEN
-$!
-$! Extract The File Name From The File List.
-$! This part is a bit more complicated.
-$!
-$ IF APPLICATION .EQS. ""
-$ THEN
-$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
-$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
-$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
-$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
-$ FILE_COUNTER = 0
-$ ENDIF
-$
-$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
-$! SHOW SYMBOL APPLICATION*
-$!
-$ IF APPLICATION .NES. ";"
-$ THEN
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS)
-$ IF FILE_NAME .EQS. ","
-$ THEN
-$ APPLICATION = ""
-$ GOTO NEXT_FILE
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$ ENDIF
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
$!
$! Check To See If We Are At The End Of The File List.
$!
$ IF (FILE_NAME.EQS.",")
$ THEN
$!
-$! We Are At The End Of The File List, Change State Or Goto FILE_DONE.
+$! We Are At The End Of The File List, Goto FILE_DONE.
$!
-$ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY"
-$ THEN
-$ STATE = "APPS"
-$ GOTO MODULE_AGAIN
-$ ELSE
-$ GOTO FILE_DONE
-$ ENDIF
+$ GOTO FILE_DONE
$!
$! End The File List Check.
$!
$!
$! Tell The User We Are Compiling The File.
$!
-$ IF (MODULE_NAME.EQS."")
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")"
-$ ENDIF
-$ IF (MODULE_NAME.NES."")
-$ THEN
-$ WRITE SYS$OUTPUT " ",FILE_NAME,""
-$ ENDIF
+$ WRITE SYS$OUTPUT " ",FILE_NAME,""
$!
$! Compile The File.
$!
$ ENDIF
$ ENDIF
$ ENDIF
-$ IF STATE .EQS. "LIB"
-$ THEN
$!
-$! Add It To The Library.
+$! Add It To The Library.
$!
-$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
+$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
$!
-$! Time To Clean Up The Object File.
+$! Time To Clean Up The Object File.
$!
-$ DELETE 'OBJECT_FILE';*
-$ ENDIF
+$ DELETE 'OBJECT_FILE';*
$!
$! Go Back And Do It Again.
$!
$!
$ FILE_DONE:
$!
-$! Time To Build Some Applications
-$!
-$ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY"
-$ THEN
-$ APPLICATION_COUNTER = 0
-$ NEXT_APPLICATION:
-$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
-$ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE
-$
-$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
-$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
-$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
-$
-$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
-$! SHOW SYMBOL APPLICATION*
-$!
-$! Tell the user what happens
-$!
-$ WRITE SYS$OUTPUT " ",APPLICATION,".exe"
-$!
-$! Link The Program.
-$!
-$ ON ERROR THEN GOTO NEXT_APPLICATION
-$!
-$! Link With A TCP/IP Library.
-$!
-$ LINK /'DEBUGGER' /'LINKMAP' /'TRACEBACK' -
- /EXE='EXE_DIR''APPLICATION'.EXE -
- 'OBJ_DIR''APPLICATION_OBJECTS', -
- 'CRYPTO_LIB'/LIBRARY -
- 'TCPIP_LIB' -
- 'ZLIB_LIB' -
- ,'OPT_FILE' /OPTIONS
-$!
-$ GOTO NEXT_APPLICATION
-$ APPLICATION_DONE:
-$ ENDIF
-$!
-$! Go Back And Get The Next Module.
+$! Go Back And Get The Next Part.
$!
-$ GOTO MODULE_NEXT
+$ GOTO PART_NEXT
$!
$! All Done With This Module.
$!
$!
$! Else, Check To See If P1 Has A Valid Argument.
$!
-$ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS")
+$ IF (P1.EQS."LIBRARY")
$ THEN
$!
$! A Valid Argument.
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
$ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.CRYPTO]*.EXE Programs."
$ WRITE SYS$OUTPUT ""
$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
$ WRITE SYS$OUTPUT ""
$ __HERE = F$EDIT(__HERE,"UPCASE")
$ __TOP = __HERE - "CRYPTO]"
$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
+$ __INTERNAL = __TOP + "CRYPTO.INCLUDE.INTERNAL]"
$!
$! Set up the logical name OPENSSL to point at the include directory
$!
$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$ DEFINE INTERNAL/NOLOG '__INTERNAL'
$!
$! Done
$!
$ IF __SAVE_OPENSSL .EQS. ""
$ THEN
$ DEASSIGN OPENSSL
+$ DEASSIGN INTERNAL
$ ELSE
$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
$ ENDIF
$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
$ WRITE H_FILE "#endif"
$
+$!
+$! Defined the full SDIRS here. It will be pruned depending on configuration.
+$! This is an exact copy of what's found in Makefile.org, with spaces replaced
+$! with commas.
+$!
+$ SDIRS := -
+ objects,-
+ md2,md4,md5,sha,mdc2,hmac,ripemd,whrlpool,-
+ des,aes,rc2,rc4,rc5,idea,bf,cast,camellia,seed,modes,-
+ bn,ec,rsa,dsa,ecdsa,dh,ecdh,dso,engine,-
+ buffer,bio,stack,lhash,rand,err,-
+ evp,asn1,pem,x509,x509v3,conf,txt_db,pkcs7,pkcs12,comp,ocsp,ui,krb5,-
+ cms,pqueue,ts,jpake,srp,store,cmac
+$
$! One of the best way to figure out what the list should be is to do
$! the following on a Unix system:
-$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
+$! grep OPENSSL_NO_ crypto/include/internal/*.h crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
$! For that reason, the list will also always end up in alphabetical order
$ CONFIG_LOGICALS := AES,-
ASM,INLINE_ASM,-
EC_NISTP_64_GCC_128,-
ENGINE,-
ERR,-
- EVP,-
- FP_API,-
GMP,-
GOST,-
- HASH_COMP,-
+ HEARTBEATS,-
HMAC,-
IDEA,-
JPAKE,-
KRB5,-
- LHASH,-
MD2,-
MD4,-
MD5,-
MDC2,-
NEXTPROTONEG,-
+ OCB,-
OCSP,-
PSK,-
RC2,-
RC4,-
RC5,-
- RIPEMD,-
+ RMD160,-
RSA,-
+ SCTP,-
SEED,-
- SHA,-
- SHA0,-
- SHA1,-
- SHA256,-
- SHA512,-
SOCK,-
SRP,-
+ SRTP,-
+ SSL3_METHOD,-
SSL_INTERN,-
- STACK,-
+ SSL_TRACE,-
STATIC_ENGINE,-
STDIO,-
STORE,-
TLSEXT,-
+ UNIT_TEST,-
WHIRLPOOL
-$! Add a few that we know about
-$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-
- THREADS
+$ CONFIG_EXPERIMENTAL := JPAKE,-
+ STORE
$! The following rules, which dictate how some algorithm choices affect
$! others, are picked from Configure.
$! Quick syntax:
$! To force something to be enabled or disabled, have no algorithms in the
$! algos part.
$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
+ RMD160/RIPEMD;-
DES/MDC2;-
EC/ECDSA,ECDH;-
MD5/SSL3,TLS1;-
SHA/SSL3,TLS1;-
+ RSA,DSA/SSL3,TLS1;-
DH/SSL3,TLS1;-
TLS1/TLSEXT;-
EC/GOST;-
DSA/GOST;-
DH/GOST;-
+ TLSEXT/SRP,HEARTBEAT;-
/STATIC_ENGINE;-
/KRB5;-
- /EC_NISTP_64_GCC_128
+ /DEPRECATED;-
+ /EC_NISTP_64_GCC_128;-
+ /GMP;-
+ /MD2;-
+ /RC5;-
+ /RFC3779;-
+ /SCTP;-
+ /SSL_TRACE;-
+ /UNIT_TEST
$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
/THREADS
$
";/WHIRLPOOL"
$ ENDIF
$
+$! Keep track of things to remove from SDIRS, have the items surrounded
+$! with commas
+$ SKIP_SDIRS = ","
+$
$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP1:
+$ CONFIG_LOG_LOOP11:
$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1
-$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP11
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP11_END
$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
$ THEN
$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
$ ELSE
$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$ ! Because all algorithms are assumed enabled by default
+$ ! Because all non-experimental algorithms are assumed
+$ ! enabled by default
$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
$ ENDIF
-$ GOTO CONFIG_LOG_LOOP1
-$ CONFIG_LOG_LOOP1_END:
+$ GOTO CONFIG_LOG_LOOP11
+$ CONFIG_LOG_LOOP11_END:
+$
+$ CONFIG_LOG_I = 0
+$ CONFIG_LOG_LOOP12:
+$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_EXPERIMENTAL),"TRIM")
+$ CONFIG_LOG_I = CONFIG_LOG_I + 1
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP12
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP12_END
+$ IF F$TRNLNM("OPENSSL_EXPERIMENTAL_"+CONFIG_LOG_E)
+$ THEN
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .NES. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS - (CONFIG_LOG_E + ",")
+$ ELSE
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
+$ ! Because all experimental algorithms are assumed
+$ ! disabled by default
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
+$ IF (SKIP_SDIRS - (","+CONFIG_LOG_E+",")) .EQS. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS + CONFIG_LOG_E + ","
+$ ENDIF
+$ GOTO CONFIG_LOG_LOOP12
+$ CONFIG_LOG_LOOP12_END:
$
$! Apply cascading disable rules
$ CONFIG_DISABLE_I = 0
$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
$ ! Better not to assume defaults at this point...
$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .EQS. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS + CONFIG_DEPENDENT_E + ","
$ WRITE SYS$ERROR -
"''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
$ GOTO CONFIG_DISABLE_LOOP2
$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
$ ! Better not to assume defaults at this point...
$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ IF (SKIP_SDIRS - (","+CONFIG_DEPENDENT_E+",")) .NES. SKIP_SDIRS THEN -
+ SKIP_SDIRS = SKIP_SDIRS - (CONFIG_DEPENDENT_E + ",")
$ WRITE SYS$ERROR -
"''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
$ GOTO CONFIG_ENABLE_LOOP2
$ GOTO CONFIG_ENABLE_LOOP0
$ CONFIG_ENABLE_LOOP0_END:
$
+$! Fix SDIRS
+$ SDIRS = ","+F$EDIT(SDIRS,"COLLAPSE")+","
+$ CONFIG_SKIP_I = 0
+$ CONFIG_SDIRS_LOOP1:
+$ CONFIG_SKIP_E = F$EDIT(F$ELEMENT(CONFIG_SKIP_I,",",SKIP_SDIRS),"TRIM")
+$ CONFIG_SKIP_I = CONFIG_SKIP_I + 1
+$ IF CONFIG_SKIP_E .EQS. "" THEN GOTO CONFIG_SDIRS_LOOP1
+$ IF CONFIG_SKIP_E .EQS. "," THEN GOTO CONFIG_SDIRS_LOOP1_END
+$ IF (SDIRS - (","+CONFIG_SKIP_E+",")) .NES. SDIRS THEN -
+ SDIRS = SDIRS - (CONFIG_SKIP_E+",")
+$ GOTO CONFIG_SDIRS_LOOP1
+$ CONFIG_SDIRS_LOOP1_END:
+$
$! Write to the configuration
$ CONFIG_LOG_I = 0
$ CONFIG_LOG_LOOP2:
$ CONFIG_LOG_I = CONFIG_LOG_I + 1
$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
-$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
+$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
$ THEN
-$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
+$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "#endif"
+$ ELSE
+$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "#endif"
-$ ELSE
-$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E
+$ WRITE H_FILE "#ifndef OPENSSL_EXPERIMENTAL_",CONFIG_LOG_E
+$ WRITE H_FILE "# ifndef OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# endif"
$ WRITE H_FILE "#endif"
+$
+$ IF F$TYPE(USER_CCDEFS) .NES. ""
+$ THEN
+$ USER_CCDEFS = USER_CCDEFS + ",OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
+$ ELSE
+$ USER_CCDEFS = "OPENSSL_EXPERIMENTAL_" + CONFIG_LOG_E
+$ ENDIF
$ ENDIF
$ ENDIF
$ GOTO CONFIG_LOG_LOOP2
$ CONFIG_LOG_LOOP2_END:
+$
+$ WRITE/SYMBOL SYS$ERROR "SDIRS = """,SDIRS,""""
$!
$ WRITE H_FILE ""
$ WRITE H_FILE "/* STCP support comes with TCPIP 5.7 ECO 2 "
$!
$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
$!
-$ SDIRS := , -
+$ HEADER_SDIRS := , -
'ARCHD', -
OBJECTS, -
MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, -
$ EXHEADER_CMAC := cmac.h
$!
$ i = 0
-$ loop_sdirs:
-$ sdir = f$edit( f$element( i, ",", sdirs), "trim")
+$ loop_header_sdirs:
+$ sdir = f$edit( f$element( i, ",", header_sdirs), "trim")
$ i = i + 1
-$ if (sdir .eqs. ",") then goto loop_sdirs_end
+$ if (sdir .eqs. ",") then goto loop_header_sdirs_end
$ hdr_list = exheader_'sdir'
$ if (sdir .nes. "") then sdir = "."+ sdir
$ copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl]
-$ goto loop_sdirs
-$ loop_sdirs_end:
+$ goto loop_header_sdirs
+$ loop_header_sdirs_end:
$!
$! Copy All The ".H" Files From The [.SSL] Directory.
$!
$! (keep these in the same order as ssl/Makefile)
-$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h
+$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h, srtp.h
$ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl]
$!
$! Purge the [.include.openssl] header files.
$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
"''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
$!
-$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
-$!
-$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" -
- "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'"
-$!
$! Go Back To The Main Directory.
$!
$ SET DEFAULT [-]
projects / openssl / commitdiff