--- /dev/null
+/* LEDC tested by PCNT in some case
+ * PCNT can get the LEDC waveform frequency
+ *
+ * test environment of UT_T1_LEDC:
+ * 1. connect GPIO18 with GPIO4
+ * 2. connect GPIO5 to 3.3v (in case of it is pulled down by default)
+ *
+ * some calculation related with duty:
+ * real duty = duty/2^duty_resolution
+ */
+#include <esp_types.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <malloc.h>
+#include <string.h>
+#include "rom/ets_sys.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/semphr.h"
+#include "freertos/queue.h"
+#include "freertos/xtensa_api.h"
+#include "unity.h"
+#include "soc/ledc_reg.h"
+#include "soc/ledc_struct.h"
+#include "esp_system.h"
+#include "driver/pcnt.h"
+#include "driver/ledc.h"
+#include "driver/gpio.h"
+
+#define PULSE_IO 18
+#define PCNT_INPUT_IO 4
+#define PCNT_CTRL_FLOATING_IO 5
+#define HIGHEST_LIMIT 10000
+#define LOWEST_LIMIT -10000
+
+// use PCNT to test the waveform of LEDC
+static int16_t wave_count(int last_time)
+{
+ int16_t test_counter;
+ pcnt_config_t pcnt_config = {
+ .pulse_gpio_num = PCNT_INPUT_IO,
+ .ctrl_gpio_num = PCNT_CTRL_FLOATING_IO,
+ .channel = PCNT_CHANNEL_0,
+ .unit = PCNT_UNIT_0,
+ .pos_mode = PCNT_COUNT_INC,
+ .neg_mode = PCNT_COUNT_DIS,
+ .lctrl_mode = PCNT_MODE_REVERSE,
+ .hctrl_mode = PCNT_MODE_KEEP,
+ .counter_h_lim = HIGHEST_LIMIT,
+ .counter_l_lim = LOWEST_LIMIT,
+ };
+ TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
+
+ // initialize first
+ TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
+ TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
+ TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
+ TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
+
+ vTaskDelay(last_time / portTICK_RATE_MS);
+ TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
+ return test_counter;
+}
+
+// the PCNT will count the frequency of it
+static void frequency_set_get(ledc_mode_t speed_mode, ledc_timer_t timer, uint32_t freq_hz, int16_t real_freq, int16_t error)
+{
+ int16_t count;
+ TEST_ESP_OK(ledc_set_freq(speed_mode, timer, freq_hz));
+ count = wave_count(1000);
+ TEST_ASSERT_INT16_WITHIN(error, count, real_freq);
+ TEST_ASSERT_EQUAL_INT32(ledc_get_freq(speed_mode, timer), real_freq);
+}
+
+static void timer_frequency_test(ledc_channel_t channel, ledc_timer_bit_t timer_bit, ledc_timer_t timer, ledc_mode_t speed_mode)
+{
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = speed_mode,
+ .channel = channel,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = timer,
+ .duty = 4000,
+ };
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = speed_mode,
+ .bit_num = timer_bit,
+ .timer_num = timer,
+ .freq_hz = 5000,
+ };
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ if(ledc_ch_config.speed_mode == LEDC_HIGH_SPEED_MODE) {
+ frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 100, 100, 2);
+ frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 5000, 5000, 5);
+ frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 9000, 9025, 5);
+ } else {
+ frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 10, 10, 1);
+// comment it because this is a bug that when ledc in low speed mode, its frequency can't be changed
+// frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 50, 50, 2);
+// frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 100, 100, 2);
+ }
+}
+
+static void timer_duty_set_get(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty)
+{
+ TEST_ESP_OK(ledc_set_duty(speed_mode, channel, duty));
+ TEST_ESP_OK(ledc_update_duty(speed_mode, channel));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32(ledc_get_duty(speed_mode, channel), duty);
+}
+
+// use logic analyzer to view
+static void timer_duty_test(ledc_channel_t channel, ledc_timer_bit_t timer_bit, ledc_timer_t timer, ledc_mode_t speed_mode)
+{
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = speed_mode,
+ .channel = channel,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = timer,
+ .duty = 4000,
+ };
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = speed_mode,
+ .bit_num = timer_bit,
+ .timer_num = timer,
+ .freq_hz = 5000,
+ };
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ // duty ratio: (2^duty)/(2^timer_bit)
+ timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, 0);
+ timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, 1);
+ timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, 1 << 12); // 50% duty
+ timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, (1 << 13) - 1);
+ timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, (1 << 13) - 2);
+}
+
+TEST_CASE("LEDC error log channel and timer config", "[ledc][test_env=UT_T1_LEDC]")
+{
+ //channel configuration test
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .channel = LEDC_CHANNEL_0,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = LEDC_TIMER_0,
+ .duty = 4000,
+ };
+
+ // basic right parameter test
+ ledc_channel_config_t temp_ch_config = ledc_ch_config;
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+
+ // with wrong GPIO using
+ ledc_ch_config.gpio_num = 41;
+ TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
+
+ // with wrong speed
+ ledc_ch_config = temp_ch_config;
+ ledc_ch_config.speed_mode = LEDC_SPEED_MODE_MAX;
+ TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
+
+ // with wrong channel
+ ledc_ch_config = temp_ch_config;
+ ledc_ch_config.channel = LEDC_CHANNEL_MAX;
+ TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
+
+ // with wrong interruption type
+ ledc_ch_config = temp_ch_config;
+ ledc_ch_config.intr_type = 2;
+ TEST_ASSERT_FALSE((void *)ledc_channel_config(&ledc_ch_config));
+
+ // with wrong timer
+ ledc_ch_config = temp_ch_config;
+ ledc_ch_config.timer_sel = 4;
+ TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
+
+ ledc_ch_config = temp_ch_config;
+ ledc_ch_config.duty = 12000;
+ TEST_ASSERT_FALSE((void *)ledc_channel_config(&ledc_ch_config));
+
+ // timer configuration test
+ ledc_timer_config_t ledc_time_config;
+ ledc_time_config.speed_mode = LEDC_HIGH_SPEED_MODE;
+ ledc_time_config.duty_resolution = LEDC_TIMER_13_BIT;
+ ledc_time_config.timer_num = LEDC_TIMER_0;
+ ledc_time_config.freq_hz = 5000;
+
+ ledc_timer_config_t temp_timer_config = ledc_time_config;
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ ledc_time_config.speed_mode = LEDC_SPEED_MODE_MAX;
+ TEST_ASSERT(ledc_timer_config(&ledc_time_config) == ESP_ERR_INVALID_ARG);
+
+ // wrong duty_resolution
+ ledc_time_config = temp_timer_config;
+ ledc_time_config.duty_resolution = LEDC_TIMER_BIT_MAX;
+ TEST_ASSERT(ledc_timer_config(&ledc_time_config) == ESP_ERR_INVALID_ARG);
+
+ // wrong timer
+ ledc_time_config = temp_timer_config;
+ ledc_time_config.timer_num = 4;
+ TEST_ASSERT(ledc_timer_config(&ledc_time_config) == ESP_ERR_INVALID_ARG);
+
+ uint32_t current_level = LEDC.channel_group[LEDC_HIGH_SPEED_MODE].channel[LEDC_CHANNEL_0].conf0.idle_lv;
+ TEST_ESP_OK(ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, !current_level));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32( LEDC.channel_group[LEDC_HIGH_SPEED_MODE].channel[LEDC_CHANNEL_0].conf0.idle_lv, !current_level);
+}
+
+TEST_CASE("LEDC normal channel and timer config", "[ledc][test_env=UT_T1_LEDC]")
+{
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .channel = LEDC_CHANNEL_0,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = LEDC_TIMER_0,
+ .duty = 4000,
+ };
+ ledc_channel_config_t temp_ch_config = ledc_ch_config;
+
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .bit_num = LEDC_TIMER_13_BIT,
+ .timer_num = LEDC_TIMER_0,
+ .freq_hz = 5000,
+ };
+ ledc_timer_config_t temp_time_config = ledc_time_config;
+
+ // use all kinds of speed mode, channel, timer combination to test all of possible configuration
+ ledc_mode_t speed_mode[2] = {LEDC_HIGH_SPEED_MODE, LEDC_LOW_SPEED_MODE};
+ ledc_channel_t channel_type[8] = {LEDC_CHANNEL_0, LEDC_CHANNEL_1, LEDC_CHANNEL_2, LEDC_CHANNEL_3, LEDC_CHANNEL_4, LEDC_CHANNEL_5, LEDC_CHANNEL_6, LEDC_CHANNEL_7};
+ ledc_timer_t timer_select[4] = {LEDC_TIMER_0, LEDC_TIMER_1, LEDC_TIMER_2, LEDC_TIMER_3};
+
+ for (int i = 0; i < 2; i++) {
+ ledc_ch_config.speed_mode = speed_mode[i];
+ ledc_time_config.speed_mode = speed_mode[i];
+ for (int j = 0; j < 8; j++) {
+ ledc_ch_config.channel = channel_type[j];
+ for (int k = 0; k < 4; k++) {
+ ledc_ch_config.timer_sel = timer_select[k];
+ ledc_time_config.timer_num = timer_select[k];
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+ ledc_ch_config = temp_ch_config;
+ ledc_time_config = temp_time_config;
+ }
+ }
+ }
+}
+
+TEST_CASE("LEDC set and get frequency", "[ledc][test_env=UT_T1_LEDC][timeout=60]")
+{
+ timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_0, LEDC_HIGH_SPEED_MODE);
+ timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_1, LEDC_HIGH_SPEED_MODE);
+ timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_2, LEDC_HIGH_SPEED_MODE);
+ timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_3, LEDC_HIGH_SPEED_MODE);
+// comment it because this is a bug that when ledc in low speed mode, its frequency can't be changed
+// timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_0, LEDC_LOW_SPEED_MODE);
+// timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_1, LEDC_LOW_SPEED_MODE);
+// timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_2, LEDC_LOW_SPEED_MODE);
+// timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_3, LEDC_LOW_SPEED_MODE);
+}
+
+// the duty need to be detected by waveform given by the logic analyzer
+// can't get it directly, so set it "ignore"
+TEST_CASE("LEDC set and get dut(with logic analyzer)", "[ledc][ignore]")
+{
+ ledc_timer_t timer_list[4] = {LEDC_TIMER_0, LEDC_TIMER_1, LEDC_TIMER_2, LEDC_TIMER_3};
+ ledc_mode_t speed_mode_list[2] = {LEDC_HIGH_SPEED_MODE, LEDC_LOW_SPEED_MODE};
+ for(int i=0; i<LEDC_TIMER_MAX-1; i++) {
+ for(int j=0; j<LEDC_SPEED_MODE_MAX-1; j++) {
+ timer_duty_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, timer_list[i], speed_mode_list[j]);
+ }
+ }
+}
+
+TEST_CASE("LEDC timer set", "[ledc][test_env=UT_T1_LEDC]")
+{
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .channel = LEDC_CHANNEL_0,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = LEDC_TIMER_0,
+ .duty = 800,
+ };
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .bit_num = 13,
+ .timer_num = LEDC_TIMER_0,
+ .freq_hz = 5000,
+ };
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ uint32_t freq_get;
+ uint32_t count;
+ //set timer 0 as 250Hz, use REF_TICK
+ TEST_ESP_OK(ledc_timer_set(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0, 1000, 10, LEDC_REF_TICK));
+ TEST_ESP_OK(ledc_timer_rst(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0));
+ TEST_ASSERT_EQUAL_INT32(ledc_get_freq(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0), 250);
+ freq_get = ledc_get_freq(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0);
+ count = wave_count(1000);
+ TEST_ASSERT_UINT32_WITHIN(10, count, freq_get);
+
+ //set timer 3 as 500Hz, use APB_CLK
+ TEST_ESP_OK(ledc_timer_set(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0, 5000, 13, LEDC_APB_CLK));
+ TEST_ESP_OK(ledc_timer_rst(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0));
+ TEST_ASSERT_EQUAL_INT32(ledc_get_freq(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0), 500);
+ freq_get = ledc_get_freq(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0);
+ count = wave_count(1000);
+ TEST_ASSERT_UINT32_WITHIN(50, count, freq_get);
+
+ printf("Bind channel 0 to timer 0\n");
+ TEST_ESP_OK(ledc_bind_channel_timer(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, LEDC_TIMER_0));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32(ledc_get_freq(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0), 500);
+
+ uint32_t current_level = LEDC.channel_group[LEDC_HIGH_SPEED_MODE].channel[LEDC_CHANNEL_0].conf0.idle_lv;
+ TEST_ESP_OK(ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, !current_level));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32( LEDC.channel_group[LEDC_HIGH_SPEED_MODE].channel[LEDC_CHANNEL_0].conf0.idle_lv, !current_level);
+}
+
+TEST_CASE("LEDC timer pause and resume", "[ledc][test_env=UT_T1_LEDC]")
+{
+ int16_t count;
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .channel = LEDC_CHANNEL_0,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = LEDC_TIMER_0,
+ .duty = 4000,
+ };
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .duty_resolution = LEDC_TIMER_13_BIT,
+ .timer_num = LEDC_TIMER_0,
+ .freq_hz = 5000,
+ };
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ count = wave_count(1000);
+ TEST_ASSERT_INT16_WITHIN(5, count, 5000);
+
+ //pause ledc timer, when pause it, will get no waveform count
+ printf("Pause ledc timer\n");
+ TEST_ESP_OK(ledc_timer_pause(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0));
+ vTaskDelay(10 / portTICK_RATE_MS);
+ count = wave_count(1000);
+ TEST_ASSERT_INT16_WITHIN(5, count, 0);
+ TEST_ASSERT_EQUAL_UINT32(count, 0);
+
+ //resume ledc timer
+ printf("Resume ledc timer\n");
+ TEST_ESP_OK(ledc_timer_resume(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0));
+ vTaskDelay(10 / portTICK_RATE_MS);
+ count = wave_count(1000);
+ TEST_ASSERT_UINT32_WITHIN(5, count, 5000);
+
+ //reset ledc timer
+ printf("reset ledc timer\n");
+ TEST_ESP_OK(ledc_timer_rst(LEDC_HIGH_SPEED_MODE, LEDC_TIMER_0));
+ vTaskDelay(100 / portTICK_RATE_MS);
+ TEST_ASSERT_UINT32_WITHIN(5, count, 5000);
+}
+
+TEST_CASE("LEDC fade with time(logic analyzer)", "[ledc][ignore]")
+{
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .channel = LEDC_CHANNEL_0,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = LEDC_TIMER_0,
+ .duty = 0,
+ };
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .duty_resolution = LEDC_TIMER_13_BIT,
+ .timer_num = LEDC_TIMER_0,
+ .freq_hz = 5000,
+ };
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ //initialize fade service
+ TEST_ESP_OK(ledc_fade_func_install(0));
+
+ TEST_ESP_OK(ledc_set_fade_with_time(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 4000, 1000));
+ TEST_ESP_OK(ledc_fade_start(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, LEDC_FADE_WAIT_DONE));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32(ledc_get_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0), 4000);
+
+ TEST_ESP_OK(ledc_set_fade_with_time(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0, 1000));
+ TEST_ESP_OK(ledc_fade_start(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, LEDC_FADE_NO_WAIT));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32(ledc_get_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0), 0);
+
+ //deinitial fade service
+ ledc_fade_func_uninstall();
+}
+
+TEST_CASE("LEDC fade with step(logic analyzer)", "[ledc][ignore]")
+{
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .channel = LEDC_CHANNEL_0,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = LEDC_TIMER_0,
+ .duty = 0,
+ };
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .duty_resolution = LEDC_TIMER_13_BIT,
+ .timer_num = LEDC_TIMER_0,
+ .freq_hz = 5000,
+ };
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ //initialize fade service.
+ TEST_ESP_OK(ledc_fade_func_install(0));
+
+ TEST_ESP_OK(ledc_set_fade_with_step(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 4000, 2, 1));
+ TEST_ESP_OK(ledc_fade_start(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, LEDC_FADE_WAIT_DONE));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32(ledc_get_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0), 4000);
+
+ TEST_ESP_OK(ledc_set_fade_with_step(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0, 4, 2));
+ TEST_ESP_OK(ledc_fade_start(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, LEDC_FADE_NO_WAIT));
+ vTaskDelay(1000 / portTICK_RATE_MS);
+ TEST_ASSERT_EQUAL_INT32(ledc_get_duty(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0), 0);
+
+ //scaler=0 check
+ TEST_ASSERT(ledc_set_fade_with_step(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 4000, 0, 1) == ESP_ERR_INVALID_ARG);
+
+ //deinitial fade service
+ ledc_fade_func_uninstall();
+}
+
+// memory leaking problem detecting
+TEST_CASE("LEDC memory test", "[ledc][test_env=UT_T1_LEDC]")
+{
+ ledc_channel_config_t ledc_ch_config = {
+ .gpio_num = PULSE_IO,
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .channel = LEDC_CHANNEL_0,
+ .intr_type = LEDC_INTR_DISABLE,
+ .timer_sel = LEDC_TIMER_0,
+ .duty = 0,
+ };
+ TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
+
+ ledc_timer_config_t ledc_time_config = {
+ .speed_mode = LEDC_HIGH_SPEED_MODE,
+ .duty_resolution = LEDC_TIMER_13_BIT,
+ .timer_num = LEDC_TIMER_0,
+ .freq_hz = 5000,
+ };
+ TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
+
+ uint32_t size = esp_get_free_heap_size();
+ uint32_t i;
+
+ // install and uninstall for 1000 times to test whether memory leaking exists
+ for (i = 0; i <= 1000; i++) {
+ TEST_ESP_OK(ledc_fade_func_install(0));
+ ledc_fade_func_uninstall();
+ }
+ TEST_ASSERT_INT32_WITHIN(100, size, esp_get_free_heap_size());
+ TEST_ESP_OK(ledc_stop(LEDC_HIGH_SPEED_MODE, LEDC_CHANNEL_0, 0));
+}
+
+
projects / esp-idf / commitdiff