--- /dev/null
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file. It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs-2.0/> for detailed information about
+# the directives.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do. They're here only as hints or reminders. If you are unsure
+# consult the online docs. You have been warned.
+#
+# The configuration directives are grouped into three basic sections:
+# 1. Directives that control the operation of the Apache server process as a
+# whole (the 'global environment').
+# 2. Directives that define the parameters of the 'main' or 'default' server,
+# which responds to requests that aren't handled by a virtual host.
+# These directives also provide default values for the settings
+# of all virtual hosts.
+# 3. Settings for virtual hosts, which allow Web requests to be sent to
+# different IP addresses or hostnames and have them handled by the
+# same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path. If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "/usr/local/apache" will be interpreted by the
+# server as "/usr/local/apache/logs/foo.log".
+#
+# NOTE: Where filenames are specified, you must use forward slashes
+# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
+# If a drive letter is omitted, the drive on which Apache.exe is located
+# will be used by default. It is recommended that you always supply
+# an explicit drive letter in absolute paths, however, to avoid
+# confusion.
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+ServerRoot "@@ServerRoot@@"
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+PidFile logs/httpd.pid
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+##
+## Server-Pool Size Regulation (MPM specific)
+##
+
+# NetWare MPM
+# ThreadsPerChild ...... constant number of worker threads in the server process
+# MaxRequestsPerChild .. maximum number of requests a server process serves
+
+# ThreadStackSize ...... Stack size allocated for each worker thread
+# StartThreads ......... Number of worker threads launched at server startup
+# MinSpareThreads ...... Minimum number of idle threads, to handle request spikes
+# MaxSpareThreads ...... Maximum number of idle threads
+# MaxThreads ........... Maximum number of worker threads alive at the same time
+<IfModule mpm_netware.c>
+ThreadStackSize 65536
+StartThreads 250
+MinSpareThreads 25
+MaxSpareThreads 250
+MaxThreads 1000
+</IfModule>
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, in addition to the default. See also the <VirtualHost>
+# directive.
+#
+#Listen 3000
+#Listen 12.34.56.78:80
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Statically compiled modules (those listed by `httpd -l') do not need
+# to be loaded here.
+#
+#LoadModule auth_anon_module modules/mod_auth_anon.so
+#LoadModule auth_dbm_module modules/mod_auth_dbm.so
+#LoadModule auth_digest_module modules/mod_auth_digest.so
+#LoadModule auth_ldap_module modules/mod_auth_ldap.so
+#LoadModule cern_meta_module modules/mod_cern_meta.so
+#LoadModule dav_module modules/mod_dav.so
+#LoadModule dav_fs_module modules/mod_dav_fs.so
+#LoadModule expires_module modules/mod_expires.so
+#LoadModule file_cache_module modules/mod_file_cache.so
+#LoadModule headers_module modules/mod_headers.so
+#LoadModule info_module modules/mod_info.so
+#LoadModule ldap_module modules/mod_ldap.so
+#LoadModule proxy_module modules/mod_proxy.so
+#LoadModule rewrite_module modules/mod_rewrite.so
+#LoadModule speling_module modules/mod_speling.so
+#LoadModule status_module modules/mod_status.so
+#LoadModule usertrack_module modules/mod_usertrack.so
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+
+### Section 2: 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition. These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# Port: The port to which the standalone server listens.
+#
+Port 80
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed. This address appears on some server-generated pages, such
+# as error documents. e.g. admin@your-domain.com
+#
+ServerAdmin @@ServerAdmin@@
+
+#
+# ServerName allows you to set a host name which is sent back to clients for
+# your server if it's different than the one the program would get (i.e., use
+# "www" instead of the host's real name).
+#
+# 127.0.0.1 is the TCP/IP local loop-back address. Your machine
+# always knows itself by this address. If you machine is connected to
+# a network, you should change this to be your machine's name
+#
+# Note: You cannot just invent host names and hope they work. The name you
+# define here must be a valid DNS name for your host. If you don't understand
+# this, ask your network administrator.
+# If your host doesn't have a registered DNS name, enter its IP address here.
+# You will have to access it by its address (e.g., http://123.45.67.89/)
+# anyway, and this will make redirections work in a sensible way.
+#
+ServerName @@ServerName@@
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "@@ServerRoot@@/htdocs"
+
+#
+# Each directory to which Apache has access, can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories).
+#
+# First, we configure the "default" to be a very restrictive set of
+# features.
+#
+<Directory />
+ Options FollowSymLinks
+ AllowOverride None
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "@@ServerRoot@@/htdocs">
+
+#
+# This may also be "None", "All", or any combination of "Indexes",
+# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
+#
+# Note that "MultiViews" must be named *explicitly* --- "Options All"
+# doesn't give it to you.
+#
+ Options Indexes FollowSymLinks
+
+#
+# This controls which options the .htaccess files in directories can
+# override. Can also be "All", or any combination of "Options", "FileInfo",
+# "AuthConfig", and "Limit"
+#
+ AllowOverride None
+
+#
+# Controls who can get stuff from this server.
+#
+ Order allow,deny
+ Allow from all
+
+#
+# Note that directly accessing an index.html.var typemap is much faster
+# than using MultiViews negotation on a directory. We distribute a typemap
+# of the complete index.html collection, so we use that index.html.var
+# typemap here. If Options is set to Multiviews, this optimization is lost.
+#
+ AddHandler type-map var
+ DirectoryIndex index.html index.html.var
+
+</Directory>
+
+#
+# UserDir: The name of the directory which is appended onto a user's home
+# directory if a ~user request is received. Be especially careful to use
+# proper, forward slashes here.
+#
+UserDir "public_html"
+
+#
+# Control access to UserDir directories. The following is an example
+# for a site where these directories are restricted to read-only.
+#
+# You must correct the path for the root to match your system's configured
+# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
+# or whichever, as appropriate.
+#
+#<Directory "/users/*/public_html">
+# AllowOverride FileInfo AuthConfig Limit
+# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+# <Limit GET POST OPTIONS PROPFIND>
+# Order allow,deny
+# Allow from all
+# </Limit>
+# <LimitExcept GET POST OPTIONS PROPFIND>
+# Order deny,allow
+# Deny from all
+# </LimitExcept>
+#</Directory>
+
+#
+# DirectoryIndex: Name of the file or files to use as a pre-written HTML
+# directory index. Separate multiple entries with spaces.
+#
+DirectoryIndex index.html
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for access control information.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess and .htpasswd files from being
+# viewed by Web clients.
+#
+<Files ~ "^\.ht">
+ Order allow,deny
+ Deny from all
+</Files>
+
+#
+# UseCanonicalName: With this setting turned on, whenever Apache needs
+# to construct a self-referencing URL (a URL that refers back to the
+# server the response is coming from) it will use ServerName and Port
+# to form a "canonical" name. With this setting off, Apache will use
+# the hostname:port that the client supplied, when possible. This also
+# affects SERVER_NAME and SERVER_PORT in CGI scripts.
+#
+UseCanonicalName On
+
+#
+# TypesConfig describes where the mime.types file (or equivalent) is
+# to be found.
+#
+TypesConfig conf/mime.types
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value. If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type. The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+#
+<IfModule mod_mime_magic.c>
+ MIMEMagicFile conf/magic
+</IfModule>
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here. If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog logs/error.log
+
+#
+# LogLevel: Control the number of messages logged to the error.log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+#
+LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%h %l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+#
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here. Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+#
+CustomLog logs/access.log common
+
+#
+# If you would like to have agent and referer logfiles, uncomment the
+# following directives.
+#
+#CustomLog logs/referer.log referer
+#CustomLog logs/agent.log agent
+
+#
+# If you prefer a single logfile with access, agent, and referer information
+# (Combined Logfile Format) you can use the following directive.
+#
+#CustomLog logs/access.log combined
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (error documents, FTP directory listings,
+# mod_status and mod_info output etc., but not CGI generated documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of: On | Off | EMail
+#
+ServerSignature On
+
+#
+# Aliases: Add here as many aliases as you need (with no limit). The format is
+# Alias fakename realname
+#
+# Note that if you include a trailing / on fakename then the server will
+# require it to be present in the URL. So "/icons" isn't aliased in this
+# example, only "/icons/". If the fakename is slash-terminated, then the
+# realname must also be slash terminated, and if the fakename omits the
+# trailing slash, the realname must also omit it.
+#
+# We include the /icons/ alias for FancyIndexed directory listings. If you
+# do not use FancyIndexing, you may comment this out.
+#
+Alias /icons/ "@@ServerRoot@@/icons/"
+
+<Directory "@@ServerRoot@@/icons">
+ Options Indexes MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# This should be changed to the ServerRoot/manual/. The alias provides
+# the manual, even if you choose to move your DocumentRoot. You may comment
+# this out if you do not care for the documentation.
+#
+Alias /manual "@@ServerRoot@@/manual"
+
+<Directory "@@ServerRoot@@/manual/">
+ Options Indexes FollowSymLinks MultiViews
+ AllowOverride None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# ScriptAlias: This controls which directories contain server scripts.
+# ScriptAliases are essentially the same as Aliases, except that
+# documents in the realname directory are treated as applications and
+# run by the server when requested rather than as documents sent to the client.
+# The same rules about trailing "/" apply to ScriptAlias directives as to
+# Alias.
+#
+ScriptAlias /cgi-bin/ "@@ServerRoot@@/cgi-bin/"
+
+#
+# "@@ServerRoot@@/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "@@ServerRoot@@/cgi-bin">
+ AllowOverride None
+ Options None
+ Order allow,deny
+ Allow from all
+</Directory>
+
+#
+# Redirect allows you to tell clients about documents which used to exist in
+# your server's namespace, but do not anymore. This allows you to tell the
+# clients where to look for the relocated document.
+# Example:
+# Redirect permanent /foo http://www.example.com/bar
+
+#
+# Directives controlling the display of server-generated directory listings.
+#
+
+#
+# FancyIndexing is whether you want fancy directory indexing or standard.
+# VersionSort is whether files containing version numbers should be
+# compared in the natural way, so that `apache-1.3.9.tar' is placed before
+# `apache-1.3.12.tar'.
+#
+IndexOptions FancyIndexing VersionSort
+
+#
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions. These are only displayed for
+# FancyIndexed directories.
+#
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
+
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
+
+#
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes. These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+#
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
+
+#
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+#
+# HeaderName is the name of a file which should be prepended to
+# directory indexes.
+ReadmeName README.html
+HeaderName HEADER.html
+
+#
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing. Shell-style wildcarding is permitted.
+#
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+
+#
+# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
+# information on the fly. Note: Not all browsers support this.
+# Despite the name similarity, the following Add* directives have nothing
+# to do with the FancyIndexing customization directives above.
+#
+AddEncoding x-compress Z
+AddEncoding x-gzip gz tgz
+
+#
+# DefaultLanguage and AddLanguage allows you to specify the language of
+# a document. You can then use content negotiation to give a browser a
+# file in a language the user can understand.
+#
+# Specify a default language. This means that all data
+# going out without a specific language tag (see below) will
+# be marked with this one. You probably do NOT want to set
+# this unless you are sure it is correct for all cases.
+#
+# * It is generally better to not mark a page as
+# * being a certain language than marking it with the wrong
+# * language!
+#
+# DefaultLanguage nl
+#
+# Note 1: The suffix does not have to be the same as the language
+# keyword --- those with documents in Polish (whose net-standard
+# language code is pl) may wish to use "AddLanguage pl .po" to
+# avoid the ambiguity with the common suffix for perl scripts.
+#
+# Note 2: The example entries below illustrate that in some cases
+# the two character 'Language' abbreviation is not identical to
+# the two character 'Country' code for its country,
+# E.g. 'Danmark/dk' versus 'Danish/da'.
+#
+# Note 3: In the case of 'ltz' we violate the RFC by using a three char
+# specifier. There is 'work in progress' to fix this and get
+# the reference data for rfc1766 cleaned up.
+#
+# Danish (da) - Dutch (nl) - English (en) - Estonian (et)
+# French (fr) - German (de) - Greek-Modern (el)
+# Italian (it) - Norwegian (no) - Korean (kr)
+# Portugese (pt) - Luxembourgeois* (ltz)
+# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
+# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
+# Russian (ru)
+#
+AddLanguage da .dk
+AddLanguage nl .nl
+AddLanguage en .en
+AddLanguage et .et
+AddLanguage fr .fr
+AddLanguage de .de
+AddLanguage el .el
+AddLanguage it .it
+AddLanguage ja .ja
+AddLanguage pl .po
+AddLanguage kr .kr
+AddLanguage pt .pt
+AddLanguage no .no
+AddLanguage pt-br .pt-br
+AddLanguage ltz .ltz
+AddLanguage ca .ca
+AddLanguage es .es
+AddLanguage sv .se
+AddLanguage cz .cz
+AddLanguage ru .ru
+AddLanguage tw .tw
+AddLanguage zh-tw .tw
+
+#
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+#
+# Just list the languages in decreasing order of preference. We have
+# more or less alphabetized them here. You probably want to change this.
+#
+LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ltz ca es sv tw
+
+#
+# Specify a default charset for all pages sent out. This is
+# always a good idea and opens the door for future internationalisation
+# of your web site, should you ever want it. Specifying it as
+# a default does little harm; as the standard dictates that a page
+# is in iso-8859-1 (latin1) unless specified otherwise i.e. you
+# are merely stating the obvious. There are also some security
+# reasons in browsers, related to javascript and URL parsing
+# which encourage you to always set a default char set.
+#
+AddDefaultCharset ISO-8859-1
+
+#
+# Commonly used filename extensions to character sets. You probably
+# want to avoid clashes with the language extensions, unless you
+# are good at carefully testing your setup after each change.
+# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for
+# the official list of charset names and their respective RFCs
+#
+AddCharset ISO-8859-1 .iso8859-1 .latin1
+AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen
+AddCharset ISO-8859-3 .iso8859-3 .latin3
+AddCharset ISO-8859-4 .iso8859-4 .latin4
+AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru
+AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb
+AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk
+AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb
+AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk
+AddCharset ISO-2022-JP .iso2022-jp .jis
+AddCharset ISO-2022-KR .iso2022-kr .kis
+AddCharset ISO-2022-CN .iso2022-cn .cis
+AddCharset Big5 .Big5 .big5
+# For russian, more than one charset is used (depends on client, mostly):
+AddCharset WINDOWS-1251 .cp-1251 .win-1251
+AddCharset CP866 .cp866
+AddCharset KOI8-r .koi8-r .koi8-ru
+AddCharset KOI8-ru .koi8-uk .ua
+AddCharset ISO-10646-UCS-2 .ucs2
+AddCharset ISO-10646-UCS-4 .ucs4
+AddCharset UTF-8 .utf8
+
+# The set below does not map to a specific (iso) standard
+# but works on a fairly wide range of browsers. Note that
+# capitalization actually matters (it should not, but it
+# does for some browsers).
+#
+# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets
+# for a list of sorts. But browsers support few.
+#
+AddCharset GB2312 .gb2312 .gb
+AddCharset utf-7 .utf7
+AddCharset utf-8 .utf8
+AddCharset big5 .big5 .b5
+AddCharset EUC-TW .euc-tw
+AddCharset EUC-JP .euc-jp
+AddCharset EUC-KR .euc-kr
+AddCharset shift_jis .sjis
+
+#
+# AddType allows you to tweak mime.types without actually editing it, or to
+# make certain files to be certain types.
+#
+# For example, the PHP3 module (not part of the Apache distribution - see
+# http://www.php.net) will typically use:
+#
+#AddType application/x-httpd-php3 .php3
+#AddType application/x-httpd-php3-source .phps
+
+AddType application/x-tar .tgz
+
+#
+# AddHandler allows you to map certain file extensions to "handlers",
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action command (see below)
+#
+# If you want to use server side includes, or CGI outside
+# ScriptAliased directories, uncomment the following lines.
+#
+# To use CGI scripts:
+#
+#AddHandler cgi-script .cgi
+
+#
+# To use server-parsed HTML files
+#
+#<FilesMatch "\.shtml(\..+)?$">
+# SetOutputFilter INCLUDES
+#</FilesMatch>
+
+#
+# Uncomment the following line to enable Apache's send-asis HTTP file
+# feature
+#
+#AddHandler send-as-is asis
+
+#
+# If you wish to use server-parsed imagemap files, use
+#
+#AddHandler imap-file map
+
+#
+# To enable type maps, you might want to use
+#
+#AddHandler type-map var
+
+#
+# Action lets you define media types that will execute a script whenever
+# a matching file is called. This eliminates the need for repeated URL
+# pathnames for oft-used CGI file processors.
+# Format: Action media/type /cgi-script/location
+# Format: Action handler-name /cgi-script/location
+#
+
+#
+# Customizable error response (Apache style)
+# these come in three flavors
+#
+# 1) plain text
+#ErrorDocument 500 "The server made a boo boo."
+#
+# 2) local redirects
+#ErrorDocument 404 /missing.html
+# to redirect to local URL /missing.html
+#ErrorDocument 404 "/cgi-bin/missing_handlder.pl"
+# i.e. any string which starts with a '/' and has
+# no spaces.
+# N.B.: You can redirect to a script or a document using server-side-includes.
+#
+# 3) external redirects
+#ErrorDocument 402 http://www.example.com/subscription_info.html
+# i.e. any string whichis a valid URL.
+# N.B.: Many of the environment variables associated with the original
+# request will *not* be available to such a script.
+#
+# 4) borderline case
+#ErrorDocument 402 "http://www.example.com/info.html is the place to look"
+# treated as case '1' as it has spaces and thus is not a valid URL
+
+#
+# Putting this all together, we can Internationalize error responses.
+#
+# We use Alias to redirect any /error/HTTP_<error>.html.var response to
+# our collection of by-error message multi-language collections. We use
+# includes to substitute the appropriate text.
+#
+# You can modify the messages' appearance without changing any of the
+# default HTTP_<error>.html.var files by adding the line;
+#
+# Alias /error/include/ "/your/include/path/"
+#
+# which allows you to create your own set of files by starting with the
+# @@ServerRoot@@/error/include/ files and
+# copying them to /your/include/path/, even on a per-VirtualHost basis.
+#
+
+<IfModule mod_include.c>
+ Alias /error/ "@@ServerRoot@@/error/"
+
+ <Directory "@@ServerRoot@@/error">
+ AllowOverride None
+ Options IncludesNoExec
+ AddOutputFilter Includes html
+ AddHandler type-map var
+ Order allow,deny
+ Allow from all
+ </Directory>
+
+ ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
+ ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
+ ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
+ ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
+ ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
+ ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
+ ErrorDocument 410 /error/HTTP_GONE.html.var
+ ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
+ ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
+ ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
+ ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
+ ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+ ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
+ ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
+ ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
+ ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
+ ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
+
+</IfModule>
+
+#
+# The following directives modify normal HTTP response behavior.
+# The first directive disables keepalive for Netscape 2.x and browsers that
+# spoof it. There are known problems with these browser implementations.
+# The second directive is for Microsoft Internet Explorer 4.0b2
+# which has a broken HTTP/1.1 implementation and does not properly
+# support keepalive when it is used on 301 or 302 (redirect) responses.
+#
+BrowserMatch "Mozilla/2" nokeepalive
+BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+
+#
+# The following directive disables HTTP/1.1 responses to browsers which
+# are in violation of the HTTP/1.0 spec by not being able to grok a
+# basic 1.1 response.
+#
+BrowserMatch "RealPlayer 4\.0" force-response-1.0
+BrowserMatch "Java/1\.0" force-response-1.0
+BrowserMatch "JDK/1\.0" force-response-1.0
+
+#
+# Allow server status reports, with the URL of http://servername/server-status
+# Change the ".@@DomainName@@" to match your domain to enable.
+#
+#<Location /server-status>
+# SetHandler server-status
+# Order deny,allow
+# Deny from all
+# Allow from .@@DomainName@@
+#</Location>
+
+#
+# Allow remote server configuration reports, with the URL of
+# http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".your_domain.com" to match your domain to enable.
+#
+#<Location /server-info>
+# SetHandler server-info
+# Order deny,allow
+# Deny from all
+# Allow from .@@DomainName@@
+#</Location>
+
+#
+# Enable the LDAP connection pool and shared memory cache. Enable the
+# LDAP cache status handler. Requires that mod_ldap be loaded. Change
+# the ".your_domain.com" to match your domain to enable.
+#
+#<IfModule util_ldap.c>
+#
+# LDAPSharedCacheSize 200000
+# LDAPCacheEntries 1024
+# LDAPCacheTTL 600
+# LDAPOpCacheEntries 1024
+# LDAPOpCacheTTL 600
+#
+# <Location /ldap-status>
+# SetHandler ldap-status
+# Order deny,allow
+# Deny from all
+# Allow from .your_domain.com
+# <IfModule mod_auth_ldap.c>
+# AuthLDAPEnabled on
+# AuthLDAPURL ldap://127.0.0.1/dc=example,dc=com?uid?one
+# AuthLDAPAuthoritative on
+# require valid-user
+# </IfModule>
+# </Location>
+#
+#</IfModule>
+
+#
+# Proxy Server directives. Uncomment the following lines to
+# enable the proxy server:
+#
+#<IfModule mod_proxy.c>
+#ProxyRequests On
+#
+#<Proxy *>
+# Order deny,allow
+# Deny from all
+# Allow from .your_domain.com
+#</Directory>
+
+#
+# Enable/disable the handling of HTTP/1.1 "Via:" headers.
+# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
+# Set to one of: Off | On | Full | Block
+#
+#ProxyVia On
+
+#
+# To enable the cache as well, edit and uncomment the following lines:
+# (no cacheing without CacheRoot)
+#
+#CacheRoot "@@ServerRoot@@/proxy"
+#CacheSize 5
+#CacheGcInterval 4
+#CacheMaxExpire 24
+#CacheLastModifiedFactor 0.1
+#CacheDefaultExpire 1
+#NoCache a_domain.com another_domain.edu joes.garage_sale.com
+
+#</IfModule>
+# End of proxy directives.
+
+### Section 3: Virtual Hosts
+#
+# VirtualHost: If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at
+# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+#
+# Use name-based virtual hosting.
+#
+#NameVirtualHost *
+
+#
+# VirtualHost example:
+# Almost any Apache directive may go into a VirtualHost container.
+# The first VirtualHost section is used for requests without a known
+# server name.
+#
+#<VirtualHost *>
+# ServerAdmin webmaster@dummy-host.example.com
+# DocumentRoot /www/docs/dummy-host.example.com
+# ServerName dummy-host.example.com
+# ErrorLog logs/dummy-host.example.com-error_log
+# CustomLog logs/dummy-host.example.com-access_log common
+#</VirtualHost>
projects / apache / commitdiff