** be held constant and Z will be incremented or else Y will be incremented
** and Z will be reset to zero.
**
-** Since [version 3.6.18] ([dateof:3.6.18]),
+** Since [version 3.6.18] ([dateof:3.6.18]),
** SQLite source code has been stored in the
** <a href="http://www.fossil-scm.org/">Fossil configuration management
** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to
** function is provided for use in DLLs since DLL users usually do not have
** direct access to string constants within the DLL. ^The
** sqlite3_libversion_number() function returns an integer equal to
-** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns
-** a pointer to a string constant whose value is the same as the
+** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns
+** a pointer to a string constant whose value is the same as the
** [SQLITE_SOURCE_ID] C preprocessor macro. Except if SQLite is built
** using an edited copy of [the amalgamation], then the last four characters
** of the hash might be different from [SQLITE_SOURCE_ID].)^
/*
** CAPI3REF: Run-Time Library Compilation Options Diagnostics
**
-** ^The sqlite3_compileoption_used() function returns 0 or 1
-** indicating whether the specified option was defined at
-** compile time. ^The SQLITE_ prefix may be omitted from the
-** option name passed to sqlite3_compileoption_used().
+** ^The sqlite3_compileoption_used() function returns 0 or 1
+** indicating whether the specified option was defined at
+** compile time. ^The SQLITE_ prefix may be omitted from the
+** option name passed to sqlite3_compileoption_used().
**
** ^The sqlite3_compileoption_get() function allows iterating
** over the list of options that were defined at compile time by
** returning the N-th compile time option string. ^If N is out of range,
-** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_
-** prefix is omitted from any strings returned by
+** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_
+** prefix is omitted from any strings returned by
** sqlite3_compileoption_get().
**
** ^Support for the diagnostic functions sqlite3_compileoption_used()
-** and sqlite3_compileoption_get() may be omitted by specifying the
+** and sqlite3_compileoption_get() may be omitted by specifying the
** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
**
** See also: SQL functions [sqlite_compileoption_used()] and
** SQLite can be compiled with or without mutexes. When
** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
** are enabled and SQLite is threadsafe. When the
-** [SQLITE_THREADSAFE] macro is 0,
+** [SQLITE_THREADSAFE] macro is 0,
** the mutexes are omitted. Without the mutexes, it is not safe
** to use SQLite concurrently from more than one thread.
**
**
** ^The sqlite3_int64 and sqlite_int64 types can store integer values
** between -9223372036854775808 and +9223372036854775807 inclusive. ^The
-** sqlite3_uint64 and sqlite_uint64 types can store integer values
+** sqlite3_uint64 and sqlite_uint64 types can store integer values
** between 0 and +18446744073709551615 inclusive.
*/
#ifdef SQLITE_INT64_TYPE
typedef SQLITE_INT64_TYPE sqlite_int64;
# ifdef SQLITE_UINT64_TYPE
typedef SQLITE_UINT64_TYPE sqlite_uint64;
-# else
+# else
typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
# endif
#elif defined(_MSC_VER) || defined(__BORLANDC__)
** destructors are called is arbitrary.
**
** Applications should [sqlite3_finalize | finalize] all [prepared statements],
-** [sqlite3_blob_close | close] all [BLOB handles], and
+** [sqlite3_blob_close | close] all [BLOB handles], and
** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated
** with the [sqlite3] object prior to attempting to close the object. ^If
** sqlite3_close_v2() is called on a [database connection] that still has
** The sqlite3_exec() interface is a convenience wrapper around
** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
** that allows an application to run multiple statements of SQL
-** without having to use a lot of C code.
+** without having to use a lot of C code.
**
** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
** semicolon-separate SQL statements passed into its 2nd argument,
** from [sqlite3_column_name()].
**
** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer
-** to an empty string, or a pointer that contains only whitespace and/or
+** to an empty string, or a pointer that contains only whitespace and/or
** SQL comments, then no SQL statements are evaluated and the database
** is not changed.
**
/*
** CAPI3REF: OS Interface Open File Handle
**
-** An [sqlite3_file] object represents an open file in the
+** An [sqlite3_file] object represents an open file in the
** [sqlite3_vfs | OS interface layer]. Individual OS interface
** implementations will
** want to subclass this object by appending additional fields
** This object defines the methods used to perform various operations
** against the open file represented by the [sqlite3_file] object.
**
-** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element
+** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element
** to a non-NULL pointer, then the sqlite3_io_methods.xClose method
** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed. The
** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen]
** <li>[[SQLITE_FCNTL_CHUNK_SIZE]]
** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
** extends and truncates the database file in chunks of a size specified
-** by the user. The fourth argument to [sqlite3_file_control()] should
+** by the user. The fourth argument to [sqlite3_file_control()] should
** point to an integer (type int) containing the new chunk-size to use
** for the nominated database. Allocating database file space in large
** chunks (say 1MB at a time), may reduce file-system fragmentation and
** <li>[[SQLITE_FCNTL_SYNC]]
** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and
** sent to the VFS immediately before the xSync method is invoked on a
-** database file descriptor. Or, if the xSync method is not invoked
-** because the user has configured SQLite with
-** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place
+** database file descriptor. Or, if the xSync method is not invoked
+** because the user has configured SQLite with
+** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place
** of the xSync method. In most cases, the pointer argument passed with
** this file-control is NULL. However, if the database file is being synced
** as part of a multi-database commit, the argument points to a nul-terminated
-** string containing the transactions master-journal file name. VFSes that
-** do not need this signal should silently ignore this opcode. Applications
-** should not call [sqlite3_file_control()] with this opcode as doing so may
-** disrupt the operation of the specialized VFSes that do require it.
+** string containing the transactions master-journal file name. VFSes that
+** do not need this signal should silently ignore this opcode. Applications
+** should not call [sqlite3_file_control()] with this opcode as doing so may
+** disrupt the operation of the specialized VFSes that do require it.
**
** <li>[[SQLITE_FCNTL_COMMIT_PHASETWO]]
** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite
** and sent to the VFS after a transaction has been committed immediately
** but before the database is unlocked. VFSes that do not need this signal
** should silently ignore this opcode. Applications should not call
-** [sqlite3_file_control()] with this opcode as doing so may disrupt the
-** operation of the specialized VFSes that do require it.
+** [sqlite3_file_control()] with this opcode as doing so may disrupt the
+** operation of the specialized VFSes that do require it.
**
** <li>[[SQLITE_FCNTL_WIN32_AV_RETRY]]
** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
** <li>[[SQLITE_FCNTL_OVERWRITE]]
** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening
** a write transaction to indicate that, unless it is rolled back for some
-** reason, the entire database file will be overwritten by the current
+** reason, the entire database file will be overwritten by the current
** transaction. This is used by VACUUM operations.
**
** <li>[[SQLITE_FCNTL_VFSNAME]]
** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of
** all [VFSes] in the VFS stack. The names are of all VFS shims and the
-** final bottom-level VFS are written into memory obtained from
+** final bottom-level VFS are written into memory obtained from
** [sqlite3_malloc()] and the result is stored in the char* variable
** that the fourth parameter of [sqlite3_file_control()] points to.
** The caller is responsible for freeing the memory when done. As with
** upper-most shim only.
**
** <li>[[SQLITE_FCNTL_PRAGMA]]
-** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
+** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
** file control is sent to the open [sqlite3_file] object corresponding
** to the database file to which the pragma statement refers. ^The argument
** to the [SQLITE_FCNTL_PRAGMA] file control is an array of
** of the char** argument point to a string obtained from [sqlite3_mprintf()]
** or the equivalent and that string will become the result of the pragma or
** the error message if the pragma fails. ^If the
-** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal
+** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal
** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA]
** file control returns [SQLITE_OK], then the parser assumes that the
** VFS has handled the PRAGMA itself and the parser generates a no-op
** The argument is a pointer to a value of type sqlite3_int64 that
** is an advisory maximum number of bytes in the file to memory map. The
** pointer is overwritten with the old value. The limit is not changed if
-** the value originally pointed to is negative, and so the current limit
+** the value originally pointed to is negative, and so the current limit
** can be queried by passing in a pointer to a negative number. This
** file-control is used internally to implement [PRAGMA mmap_size].
**
** <li>[[SQLITE_FCNTL_RBU]]
** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
-** this opcode.
+** this opcode.
**
** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
**
** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
-** operations since the previous successful call to
+** operations since the previous successful call to
** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
** This file control returns [SQLITE_OK] if and only if the writes were
** all performed successfully and have been committed to persistent storage.
**
** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
-** operations since the previous successful call to
+** operations since the previous successful call to
** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
** ^This file control takes the file descriptor out of batch write mode
** so that all subsequent write operations are independent.
** the [sqlite3_file] can safely store a pointer to the
** filename if it needs to remember the filename for some reason.
** If the zFilename parameter to xOpen is a NULL pointer then xOpen
-** must invent its own temporary name for the file. ^Whenever the
+** must invent its own temporary name for the file. ^Whenever the
** xFilename parameter is NULL it will also be the case that the
** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
**
** The flags argument to xOpen() includes all bits set in
** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()]
** or [sqlite3_open16()] is used, then flags includes at least
-** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE].
+** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE].
** If xOpen() opens a file read-only then it sets *pOutFlags to
** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set.
**
** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
** with the [SQLITE_OPEN_CREATE] flag, which are both directly
** analogous to the O_EXCL and O_CREAT flags of the POSIX open()
-** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the
+** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the
** SQLITE_OPEN_CREATE, is used to indicate that file should always
** be created, and that it is an error if it already exists.
-** It is <i>not</i> used to indicate the file should be opened
+** It is <i>not</i> used to indicate the file should be opened
** for exclusive access.
**
** ^At least szOsFile bytes of memory are allocated by SQLite
** method returns a Julian Day Number for the current date and time as
** a floating point value.
** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
-** Day Number multiplied by 86400000 (the number of milliseconds in
-** a 24-hour day).
+** Day Number multiplied by 86400000 (the number of milliseconds in
+** a 24-hour day).
** ^SQLite will use the xCurrentTimeInt64() method to get the current
-** date and time if that method is available (if iVersion is 2 or
+** date and time if that method is available (if iVersion is 2 or
** greater and the function pointer is not NULL) and will fall back
** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
**
** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
** are not used by the SQLite core. These optional interfaces are provided
-** by some VFSes to facilitate testing of the VFS code. By overriding
+** by some VFSes to facilitate testing of the VFS code. By overriding
** system calls with functions under its control, a test program can
** simulate faults and error conditions that would otherwise be difficult
** or impossible to induce. The set of system calls that can be overridden
/*
** The methods above are in versions 1 through 3 of the sqlite_vfs object.
** New fields may be appended in future versions. The iVersion
- ** value will increment whenever this happens.
+ ** value will increment whenever this happens.
*/
};
** </ul>
**
** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as
-** was given on the corresponding lock.
+** was given on the corresponding lock.
**
** The xShmLock method can transition between unlocked and SHARED or
** between unlocked and EXCLUSIVE. It cannot transition between SHARED
** [database connection] (specified in the first argument).
**
** The second argument to sqlite3_db_config(D,V,...) is the
-** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code
+** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code
** that indicates what aspect of the [database connection] is being configured.
** Subsequent arguments vary depending on the configuration verb.
**
** This object is used in only one place in the SQLite interface.
** A pointer to an instance of this object is the argument to
** [sqlite3_config()] when the configuration option is
-** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC].
+** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC].
** By creating an instance of this object
** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC])
** during configuration, an application can specify an alternative
** allocators round up memory allocations at least to the next multiple
** of 8. Some allocators round up to a larger multiple or to a power of 2.
** Every memory allocation request coming in through [sqlite3_malloc()]
-** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0,
+** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0,
** that causes the corresponding memory allocation to fail.
**
** The xInit method initializes the memory allocator. For example,
** by a single thread. ^If SQLite is compiled with
** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
** it is not possible to change the [threading mode] from its default
-** value of Single-thread and so [sqlite3_config()] will return
+** value of Single-thread and so [sqlite3_config()] will return
** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD
** configuration option.</dd>
**
** SQLITE_CONFIG_SERIALIZED configuration option.</dd>
**
** [[SQLITE_CONFIG_MALLOC]] <dt>SQLITE_CONFIG_MALLOC</dt>
-** <dd> ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is
+** <dd> ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is
** a pointer to an instance of the [sqlite3_mem_methods] structure.
** The argument specifies
** alternative low-level memory allocation routines to be used in place of
** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
** that SQLite can use for the database page cache with the default page
-** cache implementation.
+** cache implementation.
** This configuration option is a no-op if an application-define page
** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
** additional cache line. </dd>
**
** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
-** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer
+** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer
** that SQLite will use for all of its dynamic memory allocation needs
** beyond those provided for by [SQLITE_CONFIG_PAGECACHE].
** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled
** configuration on individual connections.)^ </dd>
**
** [[SQLITE_CONFIG_PCACHE2]] <dt>SQLITE_CONFIG_PCACHE2</dt>
-** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is
+** <dd> ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is
** a pointer to an [sqlite3_pcache_methods2] object. This object specifies
** the interface to a custom page cache implementation.)^
** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.</dd>
** <dd> The SQLITE_CONFIG_LOG option is used to configure the SQLite
** global [error log].
** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
-** function with a call signature of void(*)(void*,int,const char*),
+** function with a call signature of void(*)(void*,int,const char*),
** and a pointer to void. ^If the function pointer is not NULL, it is
** invoked by [sqlite3_log()] to process each logging event. ^If the
** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op.
** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
-** becomes the [statement journal] spill-to-disk threshold.
+** becomes the [statement journal] spill-to-disk threshold.
** [Statement journals] are held in memory until their size (in bytes)
** exceeds this threshold, at which point they are written to disk.
** Or if the threshold is -1, statement journals are always held
#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */
#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */
#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */
-/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */
+/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */
#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */
#define SQLITE_CONFIG_PCACHE 14 /* no-op */
#define SQLITE_CONFIG_GETPCACHE 15 /* no-op */
**
** <dl>
** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
-** <dd> ^This option takes three additional arguments that determine the
+** <dd> ^This option takes three additional arguments that determine the
** [lookaside memory allocator] configuration for the [database connection].
** ^The first argument (the third parameter to [sqlite3_db_config()] is a
** pointer to a memory buffer to use for lookaside memory.
** when the "current value" returned by
** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
** Any attempt to change the lookaside memory configuration when lookaside
-** memory is in use leaves the configuration unchanged and returns
+** memory is in use leaves the configuration unchanged and returns
** [SQLITE_BUSY].)^</dd>
**
** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt>
** </dd>
**
** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt>
-** <dd> Usually, when a database in wal mode is closed or detached from a
-** database handle, SQLite checks if this will mean that there are now no
-** connections at all to the database. If so, it performs a checkpoint
+** <dd> Usually, when a database in wal mode is closed or detached from a
+** database handle, SQLite checks if this will mean that there are now no
+** connections at all to the database. If so, it performs a checkpoint
** operation before closing the connection. This option may be used to
** override this behaviour. The first parameter passed to this operation
** is an integer - non-zero to disable checkpoints-on-close, or zero (the
** ^The sqlite3_last_insert_rowid(D) interface usually returns the [rowid] of
** the most recent successful [INSERT] into a rowid table or [virtual table]
** on database connection D. ^Inserts into [WITHOUT ROWID] tables are not
-** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred
-** on the database connection D, then sqlite3_last_insert_rowid(D) returns
+** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred
+** on the database connection D, then sqlite3_last_insert_rowid(D) returns
** zero.
**
** As well as being set automatically as rows are inserted into database
** Some virtual table implementations may INSERT rows into rowid tables as
** part of committing a transaction (e.g. to flush data accumulated in memory
** to disk). In this case subsequent calls to this function return the rowid
-** associated with these internal INSERT operations, which leads to
+** associated with these internal INSERT operations, which leads to
** unintuitive results. Virtual table implementations that do write to rowid
-** tables in this way can avoid this problem by restoring the original
-** rowid value using [sqlite3_set_last_insert_rowid()] before returning
+** tables in this way can avoid this problem by restoring the original
+** rowid value using [sqlite3_set_last_insert_rowid()] before returning
** control to the user.
**
-** ^(If an [INSERT] occurs within a trigger then this routine will
-** return the [rowid] of the inserted row as long as the trigger is
-** running. Once the trigger program ends, the value returned
+** ^(If an [INSERT] occurs within a trigger then this routine will
+** return the [rowid] of the inserted row as long as the trigger is
+** running. Once the trigger program ends, the value returned
** by this routine reverts to what it was before the trigger was fired.)^
**
** ^An [INSERT] that fails due to a constraint violation is not a
** METHOD: sqlite3
**
** The sqlite3_set_last_insert_rowid(D, R) method allows the application to
-** set the value returned by calling sqlite3_last_insert_rowid(D) to R
+** set the value returned by calling sqlite3_last_insert_rowid(D) to R
** without inserting a row into the database.
*/
SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3*,sqlite3_int64);
** returned by this function.
**
** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are
-** considered - auxiliary changes caused by [CREATE TRIGGER | triggers],
+** considered - auxiliary changes caused by [CREATE TRIGGER | triggers],
** [foreign key actions] or [REPLACE] constraint resolution are not counted.
-**
-** Changes to a view that are intercepted by
-** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value
-** returned by sqlite3_changes() immediately after an INSERT, UPDATE or
-** DELETE statement run on a view is always zero. Only changes made to real
+**
+** Changes to a view that are intercepted by
+** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value
+** returned by sqlite3_changes() immediately after an INSERT, UPDATE or
+** DELETE statement run on a view is always zero. Only changes made to real
** tables are counted.
**
** Things are more complicated if the sqlite3_changes() function is
** executed while a trigger program is running. This may happen if the
** program uses the [changes() SQL function], or if some other callback
** function invokes sqlite3_changes() directly. Essentially:
-**
+**
** <ul>
** <li> ^(Before entering a trigger program the value returned by
-** sqlite3_changes() function is saved. After the trigger program
+** sqlite3_changes() function is saved. After the trigger program
** has finished, the original value is restored.)^
-**
-** <li> ^(Within a trigger program each INSERT, UPDATE and DELETE
-** statement sets the value returned by sqlite3_changes()
-** upon completion as normal. Of course, this value will not include
-** any changes performed by sub-triggers, as the sqlite3_changes()
+**
+** <li> ^(Within a trigger program each INSERT, UPDATE and DELETE
+** statement sets the value returned by sqlite3_changes()
+** upon completion as normal. Of course, this value will not include
+** any changes performed by sub-triggers, as the sqlite3_changes()
** value will be saved and restored after each sub-trigger has run.)^
** </ul>
-**
+**
** ^This means that if the changes() SQL function (or similar) is used
-** by the first INSERT, UPDATE or DELETE statement within a trigger, it
+** by the first INSERT, UPDATE or DELETE statement within a trigger, it
** returns the value as set when the calling statement began executing.
-** ^If it is used by the second or subsequent such statement within a trigger
-** program, the value returned reflects the number of rows modified by the
+** ^If it is used by the second or subsequent such statement within a trigger
+** program, the value returned reflects the number of rows modified by the
** previous INSERT, UPDATE or DELETE statement within the same trigger.
**
** See also the [sqlite3_total_changes()] interface, the
** since the database connection was opened, including those executed as
** part of trigger programs. ^Executing any other type of SQL statement
** does not affect the value returned by sqlite3_total_changes().
-**
+**
** ^Changes made as part of [foreign key actions] are included in the
** count, but those made as part of REPLACE constraint resolution are
-** not. ^Changes to a view that are intercepted by INSTEAD OF triggers
+** not. ^Changes to a view that are intercepted by INSTEAD OF triggers
** are not counted.
-**
+**
** See also the [sqlite3_changes()] interface, the
** [count_changes pragma], and the [total_changes() SQL function].
**
**
** ^The sqlite3_interrupt(D) call is in effect until all currently running
** SQL statements on [database connection] D complete. ^Any new SQL statements
-** that are started after the sqlite3_interrupt() call and before the
+** that are started after the sqlite3_interrupt() call and before the
** running statements reaches zero are interrupted as if they had been
** running prior to the sqlite3_interrupt() call. ^New SQL statements
** that are started after the running statement count reaches zero are
** ^These routines do not parse the SQL statements thus
** will not detect syntactically incorrect SQL.
**
-** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior
+** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior
** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
** automatically by sqlite3_complete16(). If that initialization fails,
** then the return value from sqlite3_complete16() will be non-zero
** The presence of a busy handler does not guarantee that it will be invoked
** when there is lock contention. ^If SQLite determines that invoking the busy
** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
-** to the application instead of invoking the
+** to the application instead of invoking the
** busy handler.
** Consider a scenario where one process is holding a read lock that
** it is trying to promote to a reserved lock and
** database connection that invoked the busy handler. In other words,
** the busy handler is not reentrant. Any such actions
** result in undefined behavior.
-**
+**
** A busy handler must not close the database connection
** or [prepared statement] that invoked the busy handler.
*/
** requested is ok. ^When the callback returns [SQLITE_DENY], the
** [sqlite3_prepare_v2()] or equivalent call that triggered the
** authorizer will fail with an error message explaining that
-** access is denied.
+** access is denied.
**
** ^The first parameter to the authorizer callback is a copy of the third
** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
** database connections for the meaning of "modify" in this paragraph.
**
** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the
-** statement might be re-prepared during [sqlite3_step()] due to a
+** statement might be re-prepared during [sqlite3_step()] due to a
** schema change. Hence, the application should ensure that the
** correct authorizer callback remains in place during the [sqlite3_step()].
**
** execution of the prepared statement, such as at the start of each
** trigger subprogram. ^The P argument is a pointer to the
** [prepared statement]. ^The X argument is a pointer to a string which
-** is the unexpanded SQL text of the prepared statement or an SQL comment
+** is the unexpanded SQL text of the prepared statement or an SQL comment
** that indicates the invocation of a trigger. ^The callback can compute
** the same text that would have been returned by the legacy [sqlite3_trace()]
** interface by using the X argument when X begins with "--" and invoking
**
** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
-** statement generates a single row of result.
+** statement generates a single row of result.
** ^The P argument is a pointer to the [prepared statement] and the
** X argument is unused.
**
** M argument should be the bitwise OR-ed combination of
** zero or more [SQLITE_TRACE] constants.
**
-** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
+** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
**
-** ^The X callback is invoked whenever any of the events identified by
+** ^The X callback is invoked whenever any of the events identified by
** mask M occur. ^The integer return value from the callback is currently
** ignored, though this may change in future releases. Callback
** implementations should return zero to ensure future compatibility.
** database connection D. An example use for this
** interface is to keep a GUI updated during a large query.
**
-** ^The parameter P is passed through as the only parameter to the
-** callback function X. ^The parameter N is the approximate number of
+** ^The parameter P is passed through as the only parameter to the
+** callback function X. ^The parameter N is the approximate number of
** [virtual machine instructions] that are evaluated between successive
** invocations of the callback X. ^If N is less than one then the progress
** handler is disabled.
** CAPI3REF: Opening A New Database Connection
** CONSTRUCTOR: sqlite3
**
-** ^These routines open an SQLite database file as specified by the
+** ^These routines open an SQLite database file as specified by the
** filename argument. ^The filename argument is interpreted as UTF-8 for
** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
** order for sqlite3_open16(). ^(A [database connection] handle is usually
** except that it accepts two additional parameters for additional control
** over the new database connection. ^(The flags parameter to
** sqlite3_open_v2() can take one of
-** the following three values, optionally combined with the
+** the following three values, optionally combined with the
** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE],
** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^
**
** information.
**
** URI filenames are parsed according to RFC 3986. ^If the URI contains an
-** authority, then it must be either an empty string or the string
-** "localhost". ^If the authority is not an empty string or "localhost", an
-** error is returned to the caller. ^The fragment component of a URI, if
+** authority, then it must be either an empty string or the string
+** "localhost". ^If the authority is not an empty string or "localhost", an
+** error is returned to the caller. ^The fragment component of a URI, if
** present, is ignored.
**
** ^SQLite uses the path component of the URI as the name of the disk file
-** which contains the database. ^If the path begins with a '/' character,
-** then it is interpreted as an absolute path. ^If the path does not begin
+** which contains the database. ^If the path begins with a '/' character,
+** then it is interpreted as an absolute path. ^If the path does not begin
** with a '/' (meaning that the authority section is omitted from the URI)
-** then the path is interpreted as a relative path.
-** ^(On windows, the first component of an absolute path
+** then the path is interpreted as a relative path.
+** ^(On windows, the first component of an absolute path
** is a drive specification (e.g. "C:").)^
**
** [[core URI query parameters]]
**
** <li> <b>mode</b>: ^(The mode parameter may be set to either "ro", "rw",
** "rwc", or "memory". Attempting to set it to any other value is
-** an error)^.
-** ^If "ro" is specified, then the database is opened for read-only
-** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the
-** third argument to sqlite3_open_v2(). ^If the mode option is set to
-** "rw", then the database is opened for read-write (but not create)
-** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had
-** been set. ^Value "rwc" is equivalent to setting both
+** an error)^.
+** ^If "ro" is specified, then the database is opened for read-only
+** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the
+** third argument to sqlite3_open_v2(). ^If the mode option is set to
+** "rw", then the database is opened for read-write (but not create)
+** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had
+** been set. ^Value "rwc" is equivalent to setting both
** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is
** set to "memory" then a pure [in-memory database] that never reads
** or writes from disk is used. ^It is an error to specify a value for
** <li> <b>cache</b>: ^The cache parameter may be set to either "shared" or
** "private". ^Setting it to "shared" is equivalent to setting the
** SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to
-** sqlite3_open_v2(). ^Setting the cache parameter to "private" is
+** sqlite3_open_v2(). ^Setting the cache parameter to "private" is
** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.
** ^If sqlite3_open_v2() is used and the "cache" parameter is present in
** a URI filename, its value overrides any behavior requested by setting
** property on a database file that does in fact change can result
** in incorrect query results and/or [SQLITE_CORRUPT] errors.
** See also: [SQLITE_IOCAP_IMMUTABLE].
-**
+**
** </ul>
**
** ^Specifying an unknown parameter in the query component of a URI is not an
**
** <table border="1" align=center cellpadding=5>
** <tr><th> URI filenames <th> Results
-** <tr><td> file:data.db <td>
+** <tr><td> file:data.db <td>
** Open the file "data.db" in the current directory.
** <tr><td> file:/home/fred/data.db<br>
-** file:///home/fred/data.db <br>
-** file://localhost/home/fred/data.db <br> <td>
+** file:///home/fred/data.db <br>
+** file://localhost/home/fred/data.db <br> <td>
** Open the database file "/home/fred/data.db".
-** <tr><td> file://darkstar/home/fred/data.db <td>
+** <tr><td> file://darkstar/home/fred/data.db <td>
** An error. "darkstar" is not a recognized authority.
-** <tr><td style="white-space:nowrap">
+** <tr><td style="white-space:nowrap">
** file:///C:/Documents%20and%20Settings/fred/Desktop/data.db
** <td> Windows only: Open the file "data.db" on fred's desktop on drive
-** C:. Note that the %20 escaping in this example is not strictly
+** C:. Note that the %20 escaping in this example is not strictly
** necessary - space characters can be used literally
** in URI filenames.
-** <tr><td> file:data.db?mode=ro&cache=private <td>
+** <tr><td> file:data.db?mode=ro&cache=private <td>
** Open file "data.db" in the current directory for read-only access.
** Regardless of whether or not shared-cache mode is enabled by
** default, use a private cache.
** <tr><td> file:/home/fred/data.db?vfs=unix-dotfile <td>
** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
** that uses dot-files in place of posix advisory locking.
-** <tr><td> file:data.db?mode=readonly <td>
+** <tr><td> file:data.db?mode=readonly <td>
** An error. "readonly" is not a valid option for the "mode" parameter.
** </table>
**
** ^URI hexadecimal escape sequences (%HH) are supported within the path and
** query components of a URI. A hexadecimal escape sequence consists of a
-** percent sign - "%" - followed by exactly two hexadecimal digits
+** percent sign - "%" - followed by exactly two hexadecimal digits
** specifying an octet value. ^Before the path or query components of a
-** URI filename are interpreted, they are encoded using UTF-8 and all
+** URI filename are interpreted, they are encoded using UTF-8 and all
** hexadecimal escape sequences replaced by a single byte containing the
** corresponding octet. If this process generates an invalid UTF-8 encoding,
** the results are undefined.
** CAPI3REF: Obtain Values For URI Parameters
**
** These are utility routines, useful to VFS implementations, that check
-** to see if a database file was a URI that contained a specific query
+** to see if a database file was a URI that contained a specific query
** parameter, and if so obtains the value of that query parameter.
**
-** If F is the database filename pointer passed into the xOpen() method of
-** a VFS implementation when the flags parameter to xOpen() has one or
+** If F is the database filename pointer passed into the xOpen() method of
+** a VFS implementation when the flags parameter to xOpen() has one or
** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and
** P is the name of the query parameter, then
** sqlite3_uri_parameter(F,P) returns the value of the P
-** parameter if it exists or a NULL pointer if P does not appear as a
+** parameter if it exists or a NULL pointer if P does not appear as a
** query parameter on F. If P is a query parameter of F
** has no explicit value, then sqlite3_uri_parameter(F,P) returns
** a pointer to an empty string.
** parameter and returns true (1) or false (0) according to the value
** of P. The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the
** value of query parameter P is one of "yes", "true", or "on" in any
-** case or if the value begins with a non-zero number. The
+** case or if the value begins with a non-zero number. The
** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of
** query parameter P is one of "no", "false", or "off" in any case or
** if the value begins with a numeric zero. If P is not a query
** 64-bit signed integer and returns that integer, or D if P does not
** exist. If the value of P is something other than an integer, then
** zero is returned.
-**
+**
** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and
** sqlite3_uri_boolean(F,P,B) returns B. If F is not a NULL pointer and
** is not a database file pathname pointer that SQLite passed into the xOpen
** CAPI3REF: Error Codes And Messages
** METHOD: sqlite3
**
-** ^If the most recent sqlite3_* API call associated with
+** ^If the most recent sqlite3_* API call associated with
** [database connection] D failed, then the sqlite3_errcode(D) interface
** returns the numeric [result code] or [extended result code] for that
** API call.
** If the most recent API call was successful,
** then the return value from sqlite3_errcode() is undefined.
** ^The sqlite3_extended_errcode()
-** interface is the same except that it always returns the
+** interface is the same except that it always returns the
** [extended result code] even when extended result codes are
** disabled.
**
** has been compiled into binary form and is ready to be evaluated.
**
** Think of each SQL statement as a separate computer program. The
-** original SQL text is source code. A prepared statement object
+** original SQL text is source code. A prepared statement object
** is the compiled object code. All SQL must be converted into a
** prepared statement before it can be run.
**
** new limit for that construct.)^
**
** ^If the new limit is a negative number, the limit is unchanged.
-** ^(For each limit category SQLITE_LIMIT_<i>NAME</i> there is a
+** ^(For each limit category SQLITE_LIMIT_<i>NAME</i> there is a
** [limits | hard upper bound]
** set at compile-time by a C preprocessor macro called
** [limits | SQLITE_MAX_<i>NAME</i>].
** ^Attempts to increase a limit above its hard upper bound are
** silently truncated to the hard upper bound.
**
-** ^Regardless of whether or not the limit was changed, the
+** ^Regardless of whether or not the limit was changed, the
** [sqlite3_limit()] interface returns the prior value of the limit.
** ^Hence, to find the current value of a limit without changing it,
** simply invoke this interface with the third parameter set to -1.
** <dd>The SQLITE_PREPARE_PERSISTENT flag is a hint to the query planner
** that the prepared statement will be retained for a long time and
** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()]
-** and [sqlite3_prepare16_v3()] assume that the prepared statement will
+** and [sqlite3_prepare16_v3()] assume that the prepared statement will
** be used just once or at most a few times and then destroyed using
** [sqlite3_finalize()] relatively soon. The current implementation acts
** on this hint by avoiding the use of [lookaside memory] so as not to
** </li>
**
** <li>
-** ^If the specific value bound to [parameter | host parameter] in the
+** ^If the specific value bound to [parameter | host parameter] in the
** WHERE clause might influence the choice of query plan for a statement,
-** then the statement will be automatically recompiled, as if there had been
+** then the statement will be automatically recompiled, as if there had been
** a schema change, on the first [sqlite3_step()] call following any change
-** to the [sqlite3_bind_text | bindings] of that [parameter].
-** ^The specific value of WHERE-clause [parameter] might influence the
+** to the [sqlite3_bind_text | bindings] of that [parameter].
+** ^The specific value of WHERE-clause [parameter] might influence the
** choice of query plan if the parameter is the left-hand side of a [LIKE]
** or [GLOB] operator or if the parameter is compared to an indexed column
** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
** the content of the database file.
**
** Note that [application-defined SQL functions] or
-** [virtual tables] might change the database indirectly as a side effect.
-** ^(For example, if an application defines a function "eval()" that
+** [virtual tables] might change the database indirectly as a side effect.
+** ^(For example, if an application defines a function "eval()" that
** calls [sqlite3_exec()], then the following SQL statement would
** change the database file through side-effects:
**
** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK],
** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true,
** since the statements themselves do not actually modify the database but
-** rather they control the timing of when other statements modify the
+** rather they control the timing of when other statements modify the
** database. ^The [ATTACH] and [DETACH] statements also cause
** sqlite3_stmt_readonly() to return true since, while those statements
-** change the configuration of a database connection, they do not make
+** change the configuration of a database connection, they do not make
** changes to the content of the database files on disk.
** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since
** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and
** METHOD: sqlite3_stmt
**
** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
-** [prepared statement] S has been stepped at least once using
+** [prepared statement] S has been stepped at least once using
** [sqlite3_step(S)] but has neither run to completion (returned
** [SQLITE_DONE] from [sqlite3_step(S)]) nor
** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S)
-** interface returns false if S is a NULL pointer. If S is not a
+** interface returns false if S is a NULL pointer. If S is not a
** NULL pointer and is not a pointer to a valid [prepared statement]
** object, then the behavior is undefined and probably undesirable.
**
** This interface can be used in combination [sqlite3_next_stmt()]
-** to locate all prepared statements associated with a database
+** to locate all prepared statements associated with a database
** connection that are in need of being reset. This can be used,
-** for example, in diagnostic routines to search for prepared
+** for example, in diagnostic routines to search for prepared
** statements that are holding a transaction open.
*/
SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
** will accept either a protected or an unprotected sqlite3_value.
** Every interface that accepts sqlite3_value arguments specifies
** whether or not it requires a protected sqlite3_value. The
-** [sqlite3_value_dup()] interface can be used to construct a new
+** [sqlite3_value_dup()] interface can be used to construct a new
** protected sqlite3_value from an unprotected sqlite3_value.
**
** The terms "protected" and "unprotected" refer to whether or not
** sqlite3_value object but no mutex is held for an unprotected
** sqlite3_value object. If SQLite is compiled to be single-threaded
** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0)
-** or if SQLite is run in one of reduced mutex modes
+** or if SQLite is run in one of reduced mutex modes
** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD]
** then there is no distinction between protected and unprotected
** sqlite3_value objects and they can be used interchangeably. However,
** or sqlite3_bind_text16() or sqlite3_bind_text64() then
** that parameter must be the byte offset
** where the NUL terminator would occur assuming the string were NUL
-** terminated. If any NUL characters occur at byte offsets less than
+** terminated. If any NUL characters occur at byte offsets less than
** the value of the fourth parameter then the resulting string value will
** contain embedded NULs. The result of expressions involving strings
** with embedded NULs is undefined.
** METHOD: sqlite3_stmt
**
** ^Return the number of columns in the result set returned by the
-** [prepared statement]. ^If this routine returns 0, that means the
+** [prepared statement]. ^If this routine returns 0, that means the
** [prepared statement] returns no data (for example an [UPDATE]).
** ^However, just because this routine returns a positive number does not
** mean that one or more rows of data will be returned. ^A SELECT statement
** For all versions of SQLite up to and including 3.6.23.1, a call to
** [sqlite3_reset()] was required after sqlite3_step() returned anything
** other than [SQLITE_ROW] before any subsequent invocation of
-** sqlite3_step(). Failure to reset the prepared statement using
+** sqlite3_step(). Failure to reset the prepared statement using
** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1],
** sqlite3_step() began
** <tr><td><b>sqlite3_column_int64</b><td>→<td>64-bit INTEGER result
** <tr><td><b>sqlite3_column_text</b><td>→<td>UTF-8 TEXT result
** <tr><td><b>sqlite3_column_text16</b><td>→<td>UTF-16 TEXT result
-** <tr><td><b>sqlite3_column_value</b><td>→<td>The result as an
+** <tr><td><b>sqlite3_column_value</b><td>→<td>The result as an
** [sqlite3_value|unprotected sqlite3_value] object.
** <tr><td> <td> <td>
** <tr><td><b>sqlite3_column_bytes</b><td>→<td>Size of a BLOB
** The return value of sqlite3_column_type() can be used to decide which
** of the first six interface should be used to extract the column value.
** The value returned by sqlite3_column_type() is only meaningful if no
-** automatic type conversions have occurred for the value in question.
+** automatic type conversions have occurred for the value in question.
** After a type conversion, the result of calling sqlite3_column_type()
** is undefined, though harmless. Future
** versions of SQLite may change the behavior of sqlite3_column_type()
** the number of bytes in that string.
** ^If the result is NULL, then sqlite3_column_bytes16() returns zero.
**
-** ^The values returned by [sqlite3_column_bytes()] and
+** ^The values returned by [sqlite3_column_bytes()] and
** [sqlite3_column_bytes16()] do not include the zero terminators at the end
** of the string. ^For clarity: the values returned by
** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of
** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
** or [sqlite3_value_bytes()], the behavior is not threadsafe.
** Hence, the sqlite3_column_value() interface
-** is normally only useful within the implementation of
+** is normally only useful within the implementation of
** [application-defined SQL functions] or [virtual tables], not within
** top-level application code.
**
** ^The second parameter is the name of the SQL function to be created or
** redefined. ^The length of the name is limited to 255 bytes in a UTF-8
** representation, exclusive of the zero-terminator. ^Note that the name
-** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes.
+** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes.
** ^Any attempt to create a function with a longer name
** will result in [SQLITE_MISUSE] being returned.
**
** ^The fourth parameter, eTextRep, specifies what
** [SQLITE_UTF8 | text encoding] this SQL function prefers for
** its parameters. The application should set this parameter to
-** [SQLITE_UTF16LE] if the function implementation invokes
+** [SQLITE_UTF16LE] if the function implementation invokes
** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the
** implementation invokes [sqlite3_value_text16be()] on an input, or
** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8]
** callbacks.
**
** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL,
-** then it is destructor for the application data pointer.
+** then it is destructor for the application data pointer.
** The destructor is invoked when the function is deleted, either by being
** overloaded or when the database connection closes.)^
** ^The destructor is also invoked if the call to
** sqlite3_create_function_v2() fails.
** ^When the destructor callback of the tenth parameter is invoked, it
-** is passed a single argument which is a copy of the application data
+** is passed a single argument which is a copy of the application data
** pointer which was the fifth parameter to sqlite3_create_function_v2().
**
** ^It is permitted to register multiple implementations of the same
** nArg parameter is a better match than a function implementation with
** a negative nArg. ^A function where the preferred text encoding
** matches the database encoding is a better
-** match than a function where the encoding is different.
+** match than a function where the encoding is different.
** ^A function where the encoding difference is between UTF16le and UTF16be
** is a closer match than a function where the encoding difference is
** between UTF8 and UTF16.
/*
** CAPI3REF: Function Flags
**
-** These constants may be ORed together with the
+** These constants may be ORed together with the
** [SQLITE_UTF8 | preferred text encoding] as the fourth argument
** to [sqlite3_create_function()], [sqlite3_create_function16()], or
** [sqlite3_create_function_v2()].
** DEPRECATED
**
** These functions are [deprecated]. In order to maintain
-** backwards compatibility with older code, these functions continue
+** backwards compatibility with older code, these functions continue
** to be supported. However, new applications should avoid
** the use of these functions. To encourage programmers to avoid
** these functions, we will not explain what they do.
** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
** extract UTF-16 strings as big-endian and little-endian respectively.
**
-** ^If [sqlite3_value] object V was initialized
+** ^If [sqlite3_value] object V was initialized
** using [sqlite3_bind_pointer(S,I,P,X,D)] or [sqlite3_result_pointer(C,P,X,D)]
** and if X and Y are strings that compare equal according to strcmp(X,Y),
** then sqlite3_value_pointer(V,Y) will return the pointer P. ^Otherwise,
-** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer()
+** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer()
** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
**
** ^(The sqlite3_value_type(V) interface returns the
** Implementations of aggregate SQL functions use this
** routine to allocate memory for storing their state.
**
-** ^The first time the sqlite3_aggregate_context(C,N) routine is called
+** ^The first time the sqlite3_aggregate_context(C,N) routine is called
** for a particular aggregate function, SQLite
** allocates N of memory, zeroes out that memory, and returns a pointer
** to the new memory. ^On second and subsequent calls to
** In those cases, sqlite3_aggregate_context() might be called for the
** first time from within xFinal().)^
**
-** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer
+** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer
** when first called if N is less than or equal to zero or if a memory
** allocate error occurs.
**
** value of N in subsequent call to sqlite3_aggregate_context() within
** the same aggregate function instance will not resize the memory
** allocation.)^ Within the xFinal callback, it is customary to set
-** N=0 in calls to sqlite3_aggregate_context(C,N) so that no
+** N=0 in calls to sqlite3_aggregate_context(C,N) so that no
** pointless memory allocations occur.
**
-** ^SQLite automatically frees the memory allocated by
+** ^SQLite automatically frees the memory allocated by
** sqlite3_aggregate_context() when the aggregate query concludes.
**
** The first parameter must be a copy of the
** some circumstances the associated metadata may be preserved. An example
** of where this might be useful is in a regular-expression matching
** function. The compiled version of the regular expression can be stored as
-** metadata associated with the pattern string.
+** metadata associated with the pattern string.
** Then as long as the pattern string remains the same,
** the compiled regular expression can be reused on multiple
** invocations of the same function.
** SQL statement)^, or
** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
** parameter)^, or
-** <li> ^(during the original sqlite3_set_auxdata() call when a memory
+** <li> ^(during the original sqlite3_set_auxdata() call when a memory
** allocation error occurs.)^ </ul>
**
-** Note the last bullet in particular. The destructor X in
+** Note the last bullet in particular. The destructor X in
** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata()
** should be called near the end of the function implementation and the
**
** ^The sqlite3_result_pointer(C,P,T,D) interface sets the result to an
** SQL NULL value, just like [sqlite3_result_null(C)], except that it
-** also associates the host-language pointer P or type T with that
+** also associates the host-language pointer P or type T with that
** NULL value such that the pointer can be retrieved within an
** [application-defined SQL function] using [sqlite3_value_pointer()].
** ^If the D parameter is not NULL, then it is a pointer to a destructor
** METHOD: sqlite3_context
**
** The sqlite3_result_subtype(C,T) function causes the subtype of
-** the result from the [application-defined SQL function] with
-** [sqlite3_context] C to be the value T. Only the lower 8 bits
+** the result from the [application-defined SQL function] with
+** [sqlite3_context] C to be the value T. Only the lower 8 bits
** of the subtype T are preserved in current versions of SQLite;
** higher order bits are discarded.
** The number of subtype bytes preserved by SQLite might increase
** deleted. ^When all collating functions having the same name are deleted,
** that collation is no longer usable.
**
-** ^The collating function callback is invoked with a copy of the pArg
+** ^The collating function callback is invoked with a copy of the pArg
** application data pointer and with two strings in the encoding specified
** by the eTextRep argument. The collating function must return an
** integer that is negative, zero, or positive
** calls to the collation creation functions or when the
** [database connection] is closed using [sqlite3_close()].
**
-** ^The xDestroy callback is <u>not</u> called if the
+** ^The xDestroy callback is <u>not</u> called if the
** sqlite3_create_collation_v2() function fails. Applications that invoke
-** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should
+** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should
** check the return code and dispose of the application data pointer
** themselves rather than expecting SQLite to deal with it for them.
-** This is different from every other SQLite interface. The inconsistency
-** is unfortunate but cannot be changed without breaking backwards
+** This is different from every other SQLite interface. The inconsistency
+** is unfortunate but cannot be changed without breaking backwards
** compatibility.
**
** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
*/
SQLITE_API int sqlite3_create_collation(
- sqlite3*,
- const char *zName,
- int eTextRep,
+ sqlite3*,
+ const char *zName,
+ int eTextRep,
void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*)
);
SQLITE_API int sqlite3_create_collation_v2(
- sqlite3*,
- const char *zName,
- int eTextRep,
+ sqlite3*,
+ const char *zName,
+ int eTextRep,
void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*),
void(*xDestroy)(void*)
);
SQLITE_API int sqlite3_create_collation16(
- sqlite3*,
+ sqlite3*,
const void *zName,
- int eTextRep,
+ int eTextRep,
void *pArg,
int(*xCompare)(void*,int,const void*,int,const void*)
);
** [sqlite3_create_collation_v2()].
*/
SQLITE_API int sqlite3_collation_needed(
- sqlite3*,
- void*,
+ sqlite3*,
+ void*,
void(*)(void*,sqlite3*,int eTextRep,const char*)
);
SQLITE_API int sqlite3_collation_needed16(
- sqlite3*,
+ sqlite3*,
void*,
void(*)(void*,sqlite3*,int eTextRep,const void*)
);
);
/*
-** Specify the activation key for a SEE database. Unless
+** Specify the activation key for a SEE database. Unless
** activated, none of the SEE routines will work.
*/
SQLITE_API void sqlite3_activate_see(
#ifdef SQLITE_ENABLE_CEROD
/*
-** Specify the activation key for a CEROD database. Unless
+** Specify the activation key for a CEROD database. Unless
** activated, none of the CEROD routines will work.
*/
SQLITE_API void sqlite3_activate_cerod(
** ^The [temp_store_directory pragma] may modify this variable and cause
** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
** the [temp_store_directory pragma] always assumes that any string
-** that this variable points to is held in memory obtained from
+** that this variable points to is held in memory obtained from
** [sqlite3_malloc] and the pragma may attempt to free that memory
** using [sqlite3_free].
** Hence, if this variable is modified directly, either it should be
** ^The [data_store_directory pragma] may modify this variable and cause
** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
** the [data_store_directory pragma] always assumes that any string
-** that this variable points to is held in memory obtained from
+** that this variable points to is held in memory obtained from
** [sqlite3_malloc] and the pragma may attempt to free that memory
** using [sqlite3_free].
** Hence, if this variable is modified directly, either it should be
** and [sqlite3_preupdate_hook()] interfaces.
*/
SQLITE_API void *sqlite3_update_hook(
- sqlite3*,
+ sqlite3*,
void(*)(void *,int ,char const *,char const *,sqlite3_int64),
void*
);
** and disabled if the argument is false.)^
**
** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
** In prior versions of SQLite,
** sharing was enabled or disabled for each thread separately.
**
** cache setting should set it explicitly.
**
** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0
-** and will always return SQLITE_MISUSE. On those systems,
-** shared cache mode should be enabled per-database connection via
+** and will always return SQLITE_MISUSE. On those systems,
+** shared cache mode should be enabled per-database connection via
** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE].
**
** This interface is threadsafe on processors where writing a
** as heap memory usages approaches the limit.
** ^The soft heap limit is "soft" because even though SQLite strives to stay
** below the limit, it will exceed the limit rather than generate
-** an [SQLITE_NOMEM] error. In other words, the soft heap limit
+** an [SQLITE_NOMEM] error. In other words, the soft heap limit
** is advisory only.
**
** ^The return value from sqlite3_soft_heap_limit64() is the size of
** from the heap.
** </ul>)^
**
-** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]),
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]),
** the soft heap limit is enforced
** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
**
** ^If the specified table is actually a view, an [error code] is returned.
**
-** ^If the specified column is "rowid", "oid" or "_rowid_" and the table
+** ^If the specified column is "rowid", "oid" or "_rowid_" and the table
** is not a [WITHOUT ROWID] table and an
** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
** parameters are set for the explicitly declared column. ^(If there is no
** prior to calling this API,
** otherwise an error will be returned.
**
-** <b>Security warning:</b> It is recommended that the
+** <b>Security warning:</b> It is recommended that the
** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
** interface. The use of the [sqlite3_enable_load_extension()] interface
** should be avoided. This will keep the SQL function [load_extension()]
** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
** initialization routine X that was registered using a prior call to
** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)]
-** routine returns 1 if initialization routine X was successfully
+** routine returns 1 if initialization routine X was successfully
** unregistered and it returns 0 if X was not on the list of initialization
** routines.
*/
** CAPI3REF: Virtual Table Object
** KEYWORDS: sqlite3_module {virtual table module}
**
-** This structure, sometimes called a "virtual table module",
-** defines the implementation of a [virtual tables].
+** This structure, sometimes called a "virtual table module",
+** defines the implementation of a [virtual tables].
** This structure consists mostly of methods for the module.
**
** ^A virtual table module is created by filling in a persistent
void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
void **ppArg);
int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
- /* The methods above are in version 1 of the sqlite_module object. Those
+ /* The methods above are in version 1 of the sqlite_module object. Those
** below are for version 2 and greater. */
int (*xSavepoint)(sqlite3_vtab *pVTab, int);
int (*xRelease)(sqlite3_vtab *pVTab, int);
** required by SQLite. If the table has at least 64 columns and any column
** to the right of the first 63 is required, then bit 63 of colUsed is also
** set. In other words, column iCol may be required if the expression
-** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
+** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
** non-zero.
**
** The [xBestIndex] method must fill aConstraintUsage[] with information
**
** ^The estimatedCost value is an estimate of the cost of a particular
** strategy. A cost of N indicates that the cost of the strategy is similar
-** to a linear scan of an SQLite table with N rows. A cost of log(N)
+** to a linear scan of an SQLite table with N rows. A cost of log(N)
** indicates that the expense of the operation is similar to that of a
** binary search on a unique indexed field of an SQLite table with N rows.
**
** ^The estimatedRows value is an estimate of the number of rows that
** will be returned by the strategy.
**
-** The xBestIndex method may optionally populate the idxFlags field with a
+** The xBestIndex method may optionally populate the idxFlags field with a
** mask of SQLITE_INDEX_SCAN_* flags. Currently there is only one such flag -
** SQLITE_INDEX_SCAN_UNIQUE. If the xBestIndex method sets this flag, SQLite
-** assumes that the strategy may visit at most one row.
+** assumes that the strategy may visit at most one row.
**
** Additionally, if xBestIndex sets the SQLITE_INDEX_SCAN_UNIQUE flag, then
** SQLite also assumes that if a call to the xUpdate() method is made as
** the xUpdate method are automatically rolled back by SQLite.
**
** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite [version 3.8.2] ([dateof:3.8.2]).
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]).
** If a virtual table extension is
-** used with an SQLite version earlier than 3.8.2, the results of attempting
-** to read or write the estimatedRows field are undefined (but are likely
+** used with an SQLite version earlier than 3.8.2, the results of attempting
+** to read or write the estimatedRows field are undefined (but are likely
** to included crashing the application). The estimatedRows field should
** therefore only be used if [sqlite3_libversion_number()] returns a
** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for [version 3.9.0] ([dateof:3.9.0]).
+** was added for [version 3.9.0] ([dateof:3.9.0]).
** It may therefore only be used if
** sqlite3_libversion_number() returns a value greater than or equal to
** 3009000.
** preexisting [virtual table] for the module.
**
** ^The module name is registered on the [database connection] specified
-** by the first parameter. ^The name of the module is given by the
+** by the first parameter. ^The name of the module is given by the
** second parameter. ^The third parameter is a pointer to
** the implementation of the [virtual table module]. ^The fourth
** parameter is an arbitrary client data pointer that is passed through
** METHOD: sqlite3
**
** ^(Virtual tables can provide alternative implementations of functions
-** using the [xFindFunction] method of the [virtual table module].
+** using the [xFindFunction] method of the [virtual table module].
** But global versions of those functions
** must exist in order to be overloaded.)^
**
** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
** </pre>)^
**
-** ^(Parameter zDb is not the filename that contains the database, but
+** ^(Parameter zDb is not the filename that contains the database, but
** rather the symbolic name of the database. For attached databases, this is
** the name that appears after the AS keyword in the [ATTACH] statement.
** For the main database file, the database name is "main". For TEMP
** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored
** in *ppBlob. Otherwise an [error code] is returned and, unless the error
** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided
-** the API is not misused, it is always safe to call [sqlite3_blob_close()]
+** the API is not misused, it is always safe to call [sqlite3_blob_close()]
** on *ppBlob after this function it returns.
**
** This function fails with SQLITE_ERROR if any of the following are true:
** <ul>
-** <li> ^(Database zDb does not exist)^,
-** <li> ^(Table zTable does not exist within database zDb)^,
-** <li> ^(Table zTable is a WITHOUT ROWID table)^,
+** <li> ^(Database zDb does not exist)^,
+** <li> ^(Table zTable does not exist within database zDb)^,
+** <li> ^(Table zTable is a WITHOUT ROWID table)^,
** <li> ^(Column zColumn does not exist)^,
** <li> ^(Row iRow is not present in the table)^,
** <li> ^(The specified column of row iRow contains a value that is not
** a TEXT or BLOB value)^,
-** <li> ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE
+** <li> ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE
** constraint and the blob is being opened for read/write access)^,
-** <li> ^([foreign key constraints | Foreign key constraints] are enabled,
+** <li> ^([foreign key constraints | Foreign key constraints] are enabled,
** column zColumn is part of a [child key] definition and the blob is
** being opened for read/write access)^.
** </ul>
**
-** ^Unless it returns SQLITE_MISUSE, this function sets the
-** [database connection] error code and message accessible via
-** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
+** ^Unless it returns SQLITE_MISUSE, this function sets the
+** [database connection] error code and message accessible via
+** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
**
** A BLOB referenced by sqlite3_blob_open() may be read using the
** [sqlite3_blob_read()] interface and modified by using
** blob.
**
** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
-** and the built-in [zeroblob] SQL function may be used to create a
+** and the built-in [zeroblob] SQL function may be used to create a
** zero-filled blob to read or write using the incremental-blob interface.
**
** To avoid a resource leak, every open [BLOB handle] should eventually
** DESTRUCTOR: sqlite3_blob
**
** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed
-** unconditionally. Even if this routine returns an error code, the
+** unconditionally. Even if this routine returns an error code, the
** handle is still closed.)^
**
** ^If the blob handle being closed was opened for read-write access, and if
** code is returned and the transaction rolled back.
**
** Calling this function with an argument that is not a NULL pointer or an
-** open blob handle results in undefined behaviour. ^Calling this routine
-** with a null pointer (such as would be returned by a failed call to
+** open blob handle results in undefined behaviour. ^Calling this routine
+** with a null pointer (such as would be returned by a failed call to
** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function
-** is passed a valid open blob handle, the values returned by the
+** is passed a valid open blob handle, the values returned by the
** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
*/
SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
** CAPI3REF: Return The Size Of An Open BLOB
** METHOD: sqlite3_blob
**
-** ^Returns the size in bytes of the BLOB accessible via the
+** ^Returns the size in bytes of the BLOB accessible via the
** successfully opened [BLOB handle] in its only argument. ^The
** incremental blob I/O routines can only read or overwriting existing
** blob content; they cannot change the size of a blob.
**
** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
** Otherwise, an [error code] or an [extended error code] is returned.)^
-** ^Unless SQLITE_MISUSE is returned, this function sets the
-** [database connection] error code and message accessible via
-** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
+** ^Unless SQLITE_MISUSE is returned, this function sets the
+** [database connection] error code and message accessible via
+** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
**
** ^If the [BLOB handle] passed as the first argument was not opened for
** writing (the flags parameter to [sqlite3_blob_open()] was zero),
** This function may only modify the contents of the BLOB; it is
** not possible to increase the size of a BLOB using this API.
** ^If offset iOffset is less than N bytes from the end of the BLOB,
-** [SQLITE_ERROR] is returned and no data is written. The size of the
-** BLOB (and hence the maximum value of N+iOffset) can be determined
-** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less
+** [SQLITE_ERROR] is returned and no data is written. The size of the
+** BLOB (and hence the maximum value of N+iOffset) can be determined
+** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less
** than zero [SQLITE_ERROR] is returned and no data is written.
**
** ^An attempt to write to an expired [BLOB handle] fails with an
** ^(Some systems (for example, Windows 95) do not support the operation
** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()
** will always return SQLITE_BUSY. The SQLite core only ever uses
-** sqlite3_mutex_try() as an optimization so this is acceptable
+** sqlite3_mutex_try() as an optimization so this is acceptable
** behavior.)^
**
** ^The sqlite3_mutex_leave() routine exits a mutex that was
** CAPI3REF: Retrieve the mutex for a database connection
** METHOD: sqlite3
**
-** ^This interface returns a pointer the [sqlite3_mutex] object that
+** ^This interface returns a pointer the [sqlite3_mutex] object that
** serializes access to the [database connection] given in the argument
** when the [threading mode] is Serialized.
** ^If the [threading mode] is Single-thread or Multi-thread then this
** <dd>This parameter records the largest memory allocation request
** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
** internal equivalents). Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
+** *pHighwater parameter to [sqlite3_status()] is of interest.
** The value written into the *pCurrent parameter is undefined.</dd>)^
**
** [[SQLITE_STATUS_MALLOC_COUNT]] ^(<dt>SQLITE_STATUS_MALLOC_COUNT</dt>
**
** [[SQLITE_STATUS_PAGECACHE_USED]] ^(<dt>SQLITE_STATUS_PAGECACHE_USED</dt>
** <dd>This parameter returns the number of pages used out of the
-** [pagecache memory allocator] that was configured using
+** [pagecache memory allocator] that was configured using
** [SQLITE_CONFIG_PAGECACHE]. The
** value returned is in pages, not in bytes.</dd>)^
**
-** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]]
+** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]]
** ^(<dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
** <dd>This parameter returns the number of bytes of page cache
** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE]
** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
** <dd>This parameter records the largest memory allocation request
** handed to [pagecache memory allocator]. Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
+** *pHighwater parameter to [sqlite3_status()] is of interest.
** The value written into the *pCurrent parameter is undefined.</dd>)^
**
** [[SQLITE_STATUS_SCRATCH_USED]] <dt>SQLITE_STATUS_SCRATCH_USED</dt>
** <dd>No longer used.</dd>
**
** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>The *pHighwater parameter records the deepest parser stack.
+** <dd>The *pHighwater parameter records the deepest parser stack.
** The *pCurrent value is undefined. The *pHighwater value is only
** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
** </dl>
** CAPI3REF: Database Connection Status
** METHOD: sqlite3
**
-** ^This interface is used to retrieve runtime status information
+** ^This interface is used to retrieve runtime status information
** about a single [database connection]. ^The first argument is the
** database connection object to be interrogated. ^The second argument
** is an integer constant, taken from the set of
** [SQLITE_DBSTATUS options], that
-** determines the parameter to interrogate. The set of
+** determines the parameter to interrogate. The set of
** [SQLITE_DBSTATUS options] is likely
** to grow in future releases of SQLite.
**
** checked out.</dd>)^
**
** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(<dt>SQLITE_DBSTATUS_LOOKASIDE_HIT</dt>
-** <dd>This parameter returns the number malloc attempts that were
+** <dd>This parameter returns the number malloc attempts that were
** satisfied using lookaside memory. Only the high-water value is meaningful;
** the current value is always zero.)^
**
** memory used by all pager caches associated with the database connection.)^
** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
**
-** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
+** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
** pager cache is shared between two or more connections the bytes of heap
** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
** <dd>This parameter returns the approximate number of bytes of heap
** memory used to store the schema for all databases associated
-** with the connection - main, temp, and any [ATTACH]-ed databases.)^
+** with the connection - main, temp, and any [ATTACH]-ed databases.)^
** ^The full amount of memory used by the schemas is reported, even if the
** schema memory is shared with other database connections due to
** [shared cache mode] being enabled.
**
** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(<dt>SQLITE_DBSTATUS_CACHE_HIT</dt>
** <dd>This parameter returns the number of pager cache hits that have
-** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT
+** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT
** is always 0.
** </dd>
**
** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(<dt>SQLITE_DBSTATUS_CACHE_MISS</dt>
** <dd>This parameter returns the number of pager cache misses that have
-** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS
+** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS
** is always 0.
** </dd>
**
** statements. For example, if the number of table steps greatly exceeds
** the number of table searches or result rows, that would tend to indicate
** that the prepared statement is using a full table scan rather than
-** an index.
+** an index.
**
** ^(This interface is used to retrieve and reset counter values from
** a [prepared statement]. The first argument is the prepared statement
** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
** <dd>^This is the number of times that SQLite has stepped forward in
** a table as part of a full table scan. Large numbers for this counter
-** may indicate opportunities for performance improvement through
+** may indicate opportunities for performance improvement through
** careful use of indices.</dd>
**
** [[SQLITE_STMTSTATUS_SORT]] <dt>SQLITE_STMTSTATUS_SORT</dt>
** [[SQLITE_STMTSTATUS_VM_STEP]] <dt>SQLITE_STMTSTATUS_VM_STEP</dt>
** <dd>^This is the number of virtual machine operations executed
** by the prepared statement if that number is less than or equal
-** to 2147483647. The number of virtual machine operations can be
+** to 2147483647. The number of virtual machine operations can be
** used as a proxy for the total work done by the prepared statement.
** If the number of virtual machine operations exceeds 2147483647
** then the value returned by this statement status code is undefined.
**
** [[SQLITE_STMTSTATUS_REPREPARE]] <dt>SQLITE_STMTSTATUS_REPREPARE</dt>
** <dd>^This is the number of times that the prepare statement has been
-** automatically regenerated due to schema changes or change to
+** automatically regenerated due to schema changes or change to
** [bound parameters] that might affect the query plan.
**
** [[SQLITE_STMTSTATUS_RUN]] <dt>SQLITE_STMTSTATUS_RUN</dt>
** KEYWORDS: {page cache}
**
** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can
-** register an alternative page cache implementation by passing in an
+** register an alternative page cache implementation by passing in an
** instance of the sqlite3_pcache_methods2 structure.)^
-** In many applications, most of the heap memory allocated by
+** In many applications, most of the heap memory allocated by
** SQLite is used for the page cache.
-** By implementing a
+** By implementing a
** custom page cache using this API, an application can better control
-** the amount of memory consumed by SQLite, the way in which
-** that memory is allocated and released, and the policies used to
-** determine exactly which parts of a database file are cached and for
+** the amount of memory consumed by SQLite, the way in which
+** that memory is allocated and released, and the policies used to
+** determine exactly which parts of a database file are cached and for
** how long.
**
** The alternative page cache mechanism is an
** [sqlite3_config()] returns.)^
**
** [[the xInit() page cache method]]
-** ^(The xInit() method is called once for each effective
+** ^(The xInit() method is called once for each effective
** call to [sqlite3_initialize()])^
** (usually only once during the lifetime of the process). ^(The xInit()
** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^
-** The intent of the xInit() method is to set up global data structures
-** required by the custom page cache implementation.
-** ^(If the xInit() method is NULL, then the
+** The intent of the xInit() method is to set up global data structures
+** required by the custom page cache implementation.
+** ^(If the xInit() method is NULL, then the
** built-in default page cache is used instead of the application defined
** page cache.)^
**
** [[the xShutdown() page cache method]]
** ^The xShutdown() method is called by [sqlite3_shutdown()].
-** It can be used to clean up
+** It can be used to clean up
** any outstanding resources before process shutdown, if required.
** ^The xShutdown() method may be NULL.
**
** though this is not guaranteed. ^The
** first parameter, szPage, is the size in bytes of the pages that must
** be allocated by the cache. ^szPage will always a power of two. ^The
-** second parameter szExtra is a number of bytes of extra storage
+** second parameter szExtra is a number of bytes of extra storage
** associated with each page cache entry. ^The szExtra parameter will
** a number less than 250. SQLite will use the
** extra szExtra bytes on each page to store metadata about the underlying
** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will
** never invoke xUnpin() except to deliberately delete a page.
** ^In other words, calls to xUnpin() on a cache with bPurgeable set to
-** false will always have the "discard" flag set to true.
+** false will always have the "discard" flag set to true.
** ^Hence, a cache created with bPurgeable false will
** never contain any unpinned pages.
**
** [[the xPagecount() page cache methods]]
** The xPagecount() method must return the number of pages currently
** stored in the cache, both pinned and unpinned.
-**
+**
** [[the xFetch() page cache methods]]
-** The xFetch() method locates a page in the cache and returns a pointer to
+** The xFetch() method locates a page in the cache and returns a pointer to
** an sqlite3_pcache_page object associated with that page, or a NULL pointer.
** The pBuf element of the returned sqlite3_pcache_page object will be a
-** pointer to a buffer of szPage bytes used to store the content of a
+** pointer to a buffer of szPage bytes used to store the content of a
** single database page. The pExtra element of sqlite3_pcache_page will be
** a pointer to the szExtra bytes of extra storage that SQLite has requested
** for each entry in the page cache.
** page cache implementation. ^The page cache implementation
** may choose to evict unpinned pages at any time.
**
-** The cache must not perform any reference counting. A single
-** call to xUnpin() unpins the page regardless of the number of prior calls
+** The cache must not perform any reference counting. A single
+** call to xUnpin() unpins the page regardless of the number of prior calls
** to xFetch().
**
** [[the xRekey() page cache methods]]
int (*xPagecount)(sqlite3_pcache*);
sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard);
- void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*,
+ void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*,
unsigned oldKey, unsigned newKey);
void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
void (*xDestroy)(sqlite3_pcache*);
**
** The backup API copies the content of one database into another.
** It is useful either for creating backups of databases or
-** for copying in-memory databases to or from persistent files.
+** for copying in-memory databases to or from persistent files.
**
** See Also: [Using the SQLite Online Backup API]
**
** ^Thus, the backup may be performed on a live source database without
** preventing other database connections from
** reading or writing to the source database while the backup is underway.
-**
-** ^(To perform a backup operation:
+**
+** ^(To perform a backup operation:
** <ol>
** <li><b>sqlite3_backup_init()</b> is called once to initialize the
-** backup,
-** <li><b>sqlite3_backup_step()</b> is called one or more times to transfer
+** backup,
+** <li><b>sqlite3_backup_step()</b> is called one or more times to transfer
** the data between the two databases, and finally
-** <li><b>sqlite3_backup_finish()</b> is called to release all resources
-** associated with the backup operation.
+** <li><b>sqlite3_backup_finish()</b> is called to release all resources
+** associated with the backup operation.
** </ol>)^
** There should be exactly one call to sqlite3_backup_finish() for each
** successful call to sqlite3_backup_init().
**
** [[sqlite3_backup_init()]] <b>sqlite3_backup_init()</b>
**
-** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the
-** [database connection] associated with the destination database
+** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the
+** [database connection] associated with the destination database
** and the database name, respectively.
** ^The database name is "main" for the main database, "temp" for the
** temporary database, or the name specified after the AS keyword in
** an [ATTACH] statement for an attached database.
-** ^The S and M arguments passed to
+** ^The S and M arguments passed to
** sqlite3_backup_init(D,N,S,M) identify the [database connection]
** and database name of the source database, respectively.
** ^The source and destination [database connections] (parameters S and D)
** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
** an error.
**
-** ^A call to sqlite3_backup_init() will fail, returning NULL, if
-** there is already a read or read-write transaction open on the
+** ^A call to sqlite3_backup_init() will fail, returning NULL, if
+** there is already a read or read-write transaction open on the
** destination database.
**
** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
** ^A successful call to sqlite3_backup_init() returns a pointer to an
** [sqlite3_backup] object.
** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and
-** sqlite3_backup_finish() functions to perform the specified backup
+** sqlite3_backup_finish() functions to perform the specified backup
** operation.
**
** [[sqlite3_backup_step()]] <b>sqlite3_backup_step()</b>
**
-** ^Function sqlite3_backup_step(B,N) will copy up to N pages between
+** ^Function sqlite3_backup_step(B,N) will copy up to N pages between
** the source and destination databases specified by [sqlite3_backup] object B.
-** ^If N is negative, all remaining source pages are copied.
+** ^If N is negative, all remaining source pages are copied.
** ^If sqlite3_backup_step(B,N) successfully copies N pages and there
** are still more pages to be copied, then the function returns [SQLITE_OK].
** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages
**
** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then
** the [sqlite3_busy_handler | busy-handler function]
-** is invoked (if one is specified). ^If the
-** busy-handler returns non-zero before the lock is available, then
+** is invoked (if one is specified). ^If the
+** busy-handler returns non-zero before the lock is available, then
** [SQLITE_BUSY] is returned to the caller. ^In this case the call to
** sqlite3_backup_step() can be retried later. ^If the source
** [database connection]
** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this
** case the call to sqlite3_backup_step() can be retried later on. ^(If
** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or
-** [SQLITE_READONLY] is returned, then
-** there is no point in retrying the call to sqlite3_backup_step(). These
-** errors are considered fatal.)^ The application must accept
-** that the backup operation has failed and pass the backup operation handle
+** [SQLITE_READONLY] is returned, then
+** there is no point in retrying the call to sqlite3_backup_step(). These
+** errors are considered fatal.)^ The application must accept
+** that the backup operation has failed and pass the backup operation handle
** to the sqlite3_backup_finish() to release associated resources.
**
** ^The first call to sqlite3_backup_step() obtains an exclusive lock
-** on the destination file. ^The exclusive lock is not released until either
-** sqlite3_backup_finish() is called or the backup operation is complete
+** on the destination file. ^The exclusive lock is not released until either
+** sqlite3_backup_finish() is called or the backup operation is complete
** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to
** sqlite3_backup_step() obtains a [shared lock] on the source database that
** lasts for the duration of the sqlite3_backup_step() call.
** through the backup process. ^If the source database is modified by an
** external process or via a database connection other than the one being
** used by the backup operation, then the backup will be automatically
-** restarted by the next call to sqlite3_backup_step(). ^If the source
+** restarted by the next call to sqlite3_backup_step(). ^If the source
** database is modified by the using the same database connection as is used
** by the backup operation, then the backup database is automatically
** updated at the same time.
**
** [[sqlite3_backup_finish()]] <b>sqlite3_backup_finish()</b>
**
-** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the
+** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the
** application wishes to abandon the backup operation, the application
** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish().
** ^The sqlite3_backup_finish() interfaces releases all
-** resources associated with the [sqlite3_backup] object.
+** resources associated with the [sqlite3_backup] object.
** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any
** active write-transaction on the destination database is rolled back.
** The [sqlite3_backup] object is invalid
** connections, then the source database connection may be used concurrently
** from within other threads.
**
-** However, the application must guarantee that the destination
-** [database connection] is not passed to any other API (by any thread) after
+** However, the application must guarantee that the destination
+** [database connection] is not passed to any other API (by any thread) after
** sqlite3_backup_init() is called and before the corresponding call to
** sqlite3_backup_finish(). SQLite does not currently check to see
** if the application incorrectly accesses the destination [database connection]
** If running in [shared cache mode], the application must
** guarantee that the shared cache used by the destination database
** is not accessed while the backup is running. In practice this means
-** that the application must guarantee that the disk file being
+** that the application must guarantee that the disk file being
** backed up to is not accessed by any connection within the process,
** not just the specific connection that was passed to sqlite3_backup_init().
**
-** The [sqlite3_backup] object itself is partially threadsafe. Multiple
+** The [sqlite3_backup] object itself is partially threadsafe. Multiple
** threads may safely make multiple concurrent calls to sqlite3_backup_step().
** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount()
** APIs are not strictly speaking threadsafe. If they are invoked at the
** ^When running in shared-cache mode, a database operation may fail with
** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
** individual tables within the shared-cache cannot be obtained. See
-** [SQLite Shared-Cache Mode] for a description of shared-cache locking.
-** ^This API may be used to register a callback that SQLite will invoke
+** [SQLite Shared-Cache Mode] for a description of shared-cache locking.
+** ^This API may be used to register a callback that SQLite will invoke
** when the connection currently holding the required lock relinquishes it.
** ^This API is only available if the library was compiled with the
** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined.
** See Also: [Using the SQLite Unlock Notification Feature].
**
** ^Shared-cache locks are released when a database connection concludes
-** its current transaction, either by committing it or rolling it back.
+** its current transaction, either by committing it or rolling it back.
**
** ^When a connection (known as the blocked connection) fails to obtain a
** shared-cache lock and SQLITE_LOCKED is returned to the caller, the
** identity of the database connection (the blocking connection) that
-** has locked the required resource is stored internally. ^After an
+** has locked the required resource is stored internally. ^After an
** application receives an SQLITE_LOCKED error, it may call the
-** sqlite3_unlock_notify() method with the blocked connection handle as
+** sqlite3_unlock_notify() method with the blocked connection handle as
** the first argument to register for a callback that will be invoked
** when the blocking connections current transaction is concluded. ^The
** callback is invoked from within the [sqlite3_step] or [sqlite3_close]
**
** ^If the blocked connection is attempting to obtain a write-lock on a
** shared-cache table, and more than one other connection currently holds
-** a read-lock on the same table, then SQLite arbitrarily selects one of
+** a read-lock on the same table, then SQLite arbitrarily selects one of
** the other connections to use as the blocking connection.
**
-** ^(There may be at most one unlock-notify callback registered by a
+** ^(There may be at most one unlock-notify callback registered by a
** blocked connection. If sqlite3_unlock_notify() is called when the
** blocked connection already has a registered unlock-notify callback,
** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is
** called with a NULL pointer as its second argument, then any existing
-** unlock-notify callback is canceled. ^The blocked connections
+** unlock-notify callback is canceled. ^The blocked connections
** unlock-notify callback may also be canceled by closing the blocked
** connection using [sqlite3_close()].
**
**
** <b>Callback Invocation Details</b>
**
-** When an unlock-notify callback is registered, the application provides a
+** When an unlock-notify callback is registered, the application provides a
** single void* pointer that is passed to the callback when it is invoked.
** However, the signature of the callback function allows SQLite to pass
** it an array of void* context pointers. The first argument passed to
** same callback function, then instead of invoking the callback function
** multiple times, it is invoked once with the set of void* context pointers
** specified by the blocked connections bundled together into an array.
-** This gives the application an opportunity to prioritize any actions
+** This gives the application an opportunity to prioritize any actions
** related to the set of unblocked database connections.
**
** <b>Deadlock Detection</b>
**
-** Assuming that after registering for an unlock-notify callback a
+** Assuming that after registering for an unlock-notify callback a
** database waits for the callback to be issued before taking any further
** action (a reasonable assumption), then using this API may cause the
** application to deadlock. For example, if connection X is waiting for
**
** <b>The "DROP TABLE" Exception</b>
**
-** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost
+** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost
** always appropriate to call sqlite3_unlock_notify(). There is however,
** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement,
** SQLite checks if there are any currently executing SELECT statements
** One way around this problem is to check the extended error code returned
** by an sqlite3_step() call. ^(If there is a blocking connection, then the
** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
-** the special "DROP TABLE/INDEX" case, the extended error code is just
+** the special "DROP TABLE/INDEX" case, the extended error code is just
** SQLITE_LOCKED.)^
*/
SQLITE_API int sqlite3_unlock_notify(
** ^The [sqlite3_wal_hook()] function is used to register a callback that
** is invoked each time data is committed to a database in wal mode.
**
-** ^(The callback is invoked by SQLite after the commit has taken place and
-** the associated write-lock on the database released)^, so the implementation
+** ^(The callback is invoked by SQLite after the commit has taken place and
+** the associated write-lock on the database released)^, so the implementation
** may read, write or [checkpoint] the database as required.
**
** ^The first parameter passed to the callback function when it is invoked
** that does not correspond to any valid SQLite error code, the results
** are undefined.
**
-** A single database handle may have at most a single write-ahead log callback
+** A single database handle may have at most a single write-ahead log callback
** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any
** previously registered write-ahead log callback. ^Note that the
** [sqlite3_wal_autocheckpoint()] interface and the
** overwrite any prior [sqlite3_wal_hook()] settings.
*/
SQLITE_API void *sqlite3_wal_hook(
- sqlite3*,
+ sqlite3*,
int(*)(void *,sqlite3*,const char*,int),
void*
);
** [sqlite3_wal_hook()] that causes any database on [database connection] D
** to automatically [checkpoint]
** after committing a transaction if there are N or
-** more frames in the [write-ahead log] file. ^Passing zero or
+** more frames in the [write-ahead log] file. ^Passing zero or
** a negative value as the nFrame parameter disables automatic
** checkpoints entirely.
**
** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to
** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^
**
-** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the
+** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the
** [write-ahead log] for database X on [database connection] D to be
** transferred into the database file and for the write-ahead log to
** be reset. See the [checkpointing] documentation for addition
**
** <dl>
** <dt>SQLITE_CHECKPOINT_PASSIVE<dd>
-** ^Checkpoint as many frames as possible without waiting for any database
-** readers or writers to finish, then sync the database file if all frames
+** ^Checkpoint as many frames as possible without waiting for any database
+** readers or writers to finish, then sync the database file if all frames
** in the log were checkpointed. ^The [busy-handler callback]
-** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode.
+** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode.
** ^On the other hand, passive mode might leave the checkpoint unfinished
** if there are concurrent readers or writers.
**
**
** <dt>SQLITE_CHECKPOINT_RESTART<dd>
** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition
-** that after checkpointing the log file it blocks (calls the
+** that after checkpointing the log file it blocks (calls the
** [busy-handler callback])
-** until all readers are reading from the database file only. ^This ensures
+** until all readers are reading from the database file only. ^This ensures
** that the next writer will restart the log file from the beginning.
** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new
** database writer attempts while it is pending, but does not impede readers.
** truncated to zero bytes and so both *pnLog and *pnCkpt will be set to zero.
**
** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If
-** any other process is running a checkpoint operation at the same time, the
-** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a
+** any other process is running a checkpoint operation at the same time, the
+** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a
** busy-handler configured, it will not be invoked in this case.
**
-** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the
+** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the
** exclusive "writer" lock on the database file. ^If the writer lock cannot be
** obtained immediately, and a busy-handler is configured, it is invoked and
** the writer lock retried until either the busy-handler returns 0 or the lock
** is successfully obtained. ^The busy-handler is also invoked while waiting for
** database readers as described above. ^If the busy-handler returns 0 before
** the writer lock is obtained or while waiting for database readers, the
-** checkpoint operation proceeds from that point in the same way as
-** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible
+** checkpoint operation proceeds from that point in the same way as
+** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible
** without blocking any further. ^SQLITE_BUSY is returned in this case.
**
** ^If parameter zDb is NULL or points to a zero length string, then the
-** specified operation is attempted on all WAL databases [attached] to
+** specified operation is attempted on all WAL databases [attached] to
** [database connection] db. In this case the
-** values written to output parameters *pnLog and *pnCkpt are undefined. ^If
-** an SQLITE_BUSY error is encountered when processing one or more of the
-** attached WAL databases, the operation is still attempted on any remaining
-** attached databases and SQLITE_BUSY is returned at the end. ^If any other
-** error occurs while processing an attached database, processing is abandoned
-** and the error code is returned to the caller immediately. ^If no error
-** (SQLITE_BUSY or otherwise) is encountered while processing the attached
+** values written to output parameters *pnLog and *pnCkpt are undefined. ^If
+** an SQLITE_BUSY error is encountered when processing one or more of the
+** attached WAL databases, the operation is still attempted on any remaining
+** attached databases and SQLITE_BUSY is returned at the end. ^If any other
+** error occurs while processing an attached database, processing is abandoned
+** and the error code is returned to the caller immediately. ^If no error
+** (SQLITE_BUSY or otherwise) is encountered while processing the attached
** databases, SQLITE_OK is returned.
**
** ^If database zDb is the name of an attached database that is not in WAL
** If X is non-zero, then the virtual table implementation guarantees
** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before
** any modifications to internal or persistent data structures have been made.
-** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite
+** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite
** is able to roll back a statement or database transaction, and abandon
-** or continue processing the current SQL statement as appropriate.
+** or continue processing the current SQL statement as appropriate.
** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns
** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode
** had been ABORT.
**
** Virtual table implementations that are required to handle OR REPLACE
-** must do so within the [xUpdate] method. If a call to the
-** [sqlite3_vtab_on_conflict()] function indicates that the current ON
-** CONFLICT policy is REPLACE, the virtual table implementation should
+** must do so within the [xUpdate] method. If a call to the
+** [sqlite3_vtab_on_conflict()] function indicates that the current ON
+** CONFLICT policy is REPLACE, the virtual table implementation should
** silently replace the appropriate rows within the xUpdate callback and
** return SQLITE_OK. Or, if this is not possible, it may return
-** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT
+** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT
** constraint handling.
** </dl>
*/
int idx, /* Index of loop to report on */
int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */
void *pOut /* Result written here */
-);
+);
/*
** CAPI3REF: Zero Scan-Status Counters
**
** ^If a write-transaction is open on [database connection] D when the
** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
-** pages in the pager-cache that are not currently in use are written out
+** pages in the pager-cache that are not currently in use are written out
** to disk. A dirty page may be in use if a database cursor created by an
** active SQL statement is reading from it, or if it is page 1 of a database
** file (page 1 is always "in use"). ^The [sqlite3_db_cacheflush(D)]
** interface flushes caches for all schemas - "main", "temp", and
** any [attached] databases.
**
-** ^If this function needs to obtain extra database locks before dirty pages
-** can be flushed to disk, it does so. ^If those locks cannot be obtained
+** ^If this function needs to obtain extra database locks before dirty pages
+** can be flushed to disk, it does so. ^If those locks cannot be obtained
** immediately and there is a busy-handler callback configured, it is invoked
** in the usual manner. ^If the required lock still cannot be obtained, then
** the database is skipped and an attempt made to flush any dirty pages
** kind of update operation that is about to occur.
** ^(The fourth parameter to the preupdate callback is the name of the
** database within the database connection that is being modified. This
-** will be "main" for the main database or "temp" for TEMP tables or
+** will be "main" for the main database or "temp" for TEMP tables or
** the name given after the AS keyword in the [ATTACH] statement for attached
** databases.)^
** ^The fifth parameter to the preupdate callback is the name of the
** table that is being modified.
**
** For an UPDATE or DELETE operation on a [rowid table], the sixth
-** parameter passed to the preupdate callback is the initial [rowid] of the
+** parameter passed to the preupdate callback is the initial [rowid] of the
** row being modified or deleted. For an INSERT operation on a rowid table,
-** or any operation on a WITHOUT ROWID table, the value of the sixth
+** or any operation on a WITHOUT ROWID table, the value of the sixth
** parameter is undefined. For an INSERT or UPDATE on a rowid table the
** seventh parameter is the final rowid value of the row being inserted
** or updated. The value of the seventh parameter passed to the callback
**
** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
** callback was invoked as a result of a direct insert, update, or delete
-** operation; or 1 for inserts, updates, or deletes invoked by top-level
+** operation; or 1 for inserts, updates, or deletes invoked by top-level
** triggers; or 2 for changes resulting from triggers called by top-level
** triggers; and so forth.
**
** The return value is OS-dependent. For example, on unix systems, after
** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
** called to get back the underlying "errno" that caused the problem, such
-** as ENOSPC, EAUTH, EISDIR, and so forth.
+** as ENOSPC, EAUTH, EISDIR, and so forth.
*/
SQLITE_API int sqlite3_system_errno(sqlite3*);
**
** The constructor for this object is [sqlite3_snapshot_get()]. The
** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
-** to an historical snapshot (if possible). The destructor for
+** to an historical snapshot (if possible). The destructor for
** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
*/
typedef struct sqlite3_snapshot {
** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
** If there is not already a read-transaction open on schema S when
-** this function is called, one is opened automatically.
+** this function is called, one is opened automatically.
**
** The following must be true for this function to succeed. If any of
** the following statements are false when sqlite3_snapshot_get() is
** called, SQLITE_ERROR is returned. The final value of *P is undefined
-** in this case.
+** in this case.
**
** <ul>
** <li> The database handle must be in [autocommit mode].
**
** <li> One or more transactions must have been written to the current wal
** file since it was created on disk (by any connection). This means
-** that a snapshot cannot be taken on a wal mode database with no wal
+** that a snapshot cannot be taken on a wal mode database with no wal
** file immediately after it is first opened. At least one transaction
** must be written to it first.
** </ul>
**
** This function may also return SQLITE_NOMEM. If it is called with the
-** database handle in autocommit mode but fails for some other reason,
+** database handle in autocommit mode but fails for some other reason,
** whether or not a read transaction is opened on schema S is undefined.
**
** The [sqlite3_snapshot] object returned from a successful call to
** database connection D does not know that the database file for
** schema S is in [WAL mode]. A database connection might not know
** that the database file is in [WAL mode] if there has been no prior
-** I/O on that database connection, or if the database entered [WAL mode]
+** I/O on that database connection, or if the database entered [WAL mode]
** after the most recent I/O on the database connection.)^
** (Hint: Run "[PRAGMA application_id]" against a newly opened
** database connection in order to make it ready to use snapshots.)
** EXPERIMENTAL
**
** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
-** of two valid snapshot handles.
+** of two valid snapshot handles.
**
-** If the two snapshot handles are not associated with the same database
-** file, the result of the comparison is undefined.
+** If the two snapshot handles are not associated with the same database
+** file, the result of the comparison is undefined.
**
** Additionally, the result of the comparison is only valid if both of the
** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
** last time the wal file was deleted. The wal file is deleted when the
** database is changed back to rollback mode or when the number of database
-** clients drops to zero. If either snapshot handle was obtained before the
-** wal file was last deleted, the value returned by this function
+** clients drops to zero. If either snapshot handle was obtained before the
+** wal file was last deleted, the value returned by this function
** is undefined.
**
** Otherwise, this API returns a negative value if P1 refers to an older
};
/*
-** Register a 2nd-generation geometry callback named zScore that can be
+** Register a 2nd-generation geometry callback named zScore that can be
** used as part of an R-Tree geometry query as follows:
**
** SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
/*
-** A pointer to a structure of the following type is passed as the
+** A pointer to a structure of the following type is passed as the
** argument to scored geometry callback registered using
** sqlite3_rtree_query_callback().
**
** is not possible for an application to register a pre-update hook on a
** database handle that has one or more session objects attached. Nor is
** it possible to create a session object attached to a database handle for
-** which a pre-update hook is already defined. The results of attempting
+** which a pre-update hook is already defined. The results of attempting
** either of these things are undefined.
**
** The session object will be used to create changesets for tables in
/*
** CAPI3REF: Delete A Session Object
**
-** Delete a session object previously allocated using
+** Delete a session object previously allocated using
** [sqlite3session_create()]. Once a session object has been deleted, the
** results of attempting to use pSession with any other session module
** function are undefined.
**
** Session objects must be deleted before the database handle to which they
-** are attached is closed. Refer to the documentation for
+** are attached is closed. Refer to the documentation for
** [sqlite3session_create()] for details.
*/
SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
** the eventual changesets.
**
** Passing zero to this function disables the session. Passing a value
-** greater than zero enables it. Passing a value less than zero is a
+** greater than zero enables it. Passing a value less than zero is a
** no-op, and may be used to query the current state of the session.
**
-** The return value indicates the final state of the session object: 0 if
+** The return value indicates the final state of the session object: 0 if
** the session is disabled, or 1 if it is enabled.
*/
SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
** <ul>
** <li> The session object "indirect" flag is set when the change is
** made, or
-** <li> The change is made by an SQL trigger or foreign key action
+** <li> The change is made by an SQL trigger or foreign key action
** instead of directly as a result of a users SQL statement.
** </ul>
**
** flag. If the second argument passed to this function is zero, then the
** indirect flag is cleared. If it is greater than zero, the indirect flag
** is set. Passing a value less than zero does not modify the current value
-** of the indirect flag, and may be used to query the current state of the
+** of the indirect flag, and may be used to query the current state of the
** indirect flag for the specified session object.
**
-** The return value indicates the final state of the indirect flag: 0 if
+** The return value indicates the final state of the indirect flag: 0 if
** it is clear, or 1 if it is set.
*/
SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
** CAPI3REF: Attach A Table To A Session Object
**
** If argument zTab is not NULL, then it is the name of a table to attach
-** to the session object passed as the first argument. All subsequent changes
-** made to the table while the session object is enabled will be recorded. See
+** to the session object passed as the first argument. All subsequent changes
+** made to the table while the session object is enabled will be recorded. See
** documentation for [sqlite3session_changeset()] for further details.
**
** Or, if argument zTab is NULL, then changes are recorded for all tables
-** in the database. If additional tables are added to the database (by
-** executing "CREATE TABLE" statements) after this call is made, changes for
+** in the database. If additional tables are added to the database (by
+** executing "CREATE TABLE" statements) after this call is made, changes for
** the new tables are also recorded.
**
** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
-** defined as part of their CREATE TABLE statement. It does not matter if the
+** defined as part of their CREATE TABLE statement. It does not matter if the
** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
** KEY may consist of a single column, or may be a composite key.
-**
+**
** It is not an error if the named table does not exist in the database. Nor
** is it an error if the named table does not have a PRIMARY KEY. However,
** no changes will be recorded in either of these scenarios.
** Changes are not recorded for individual rows that have NULL values stored
** in one or more of their PRIMARY KEY columns.
**
-** SQLITE_OK is returned if the call completes without error. Or, if an error
+** SQLITE_OK is returned if the call completes without error. Or, if an error
** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
*/
SQLITE_API int sqlite3session_attach(
/*
** CAPI3REF: Set a table filter on a Session Object.
**
-** The second argument (xFilter) is the "filter callback". For changes to rows
+** The second argument (xFilter) is the "filter callback". For changes to rows
** in tables that are not attached to the Session object, the filter is called
-** to determine whether changes to the table's rows should be tracked or not.
-** If xFilter returns 0, changes is not tracked. Note that once a table is
+** to determine whether changes to the table's rows should be tracked or not.
+** If xFilter returns 0, changes is not tracked. Note that once a table is
** attached, xFilter will not be called again.
*/
SQLITE_API void sqlite3session_table_filter(
/*
** CAPI3REF: Generate A Changeset From A Session Object
**
-** Obtain a changeset containing changes to the tables attached to the
-** session object passed as the first argument. If successful,
-** set *ppChangeset to point to a buffer containing the changeset
+** Obtain a changeset containing changes to the tables attached to the
+** session object passed as the first argument. If successful,
+** set *ppChangeset to point to a buffer containing the changeset
** and *pnChangeset to the size of the changeset in bytes before returning
** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
** zero and return an SQLite error code.
** modifies the values of primary key columns. If such a change is made, it
** is represented in a changeset as a DELETE followed by an INSERT.
**
-** Changes are not recorded for rows that have NULL values stored in one or
+** Changes are not recorded for rows that have NULL values stored in one or
** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
** no corresponding change is present in the changesets returned by this
** function. If an existing row with one or more NULL values stored in
** <ul>
** <li> For each record generated by an insert, the database is queried
** for a row with a matching primary key. If one is found, an INSERT
-** change is added to the changeset. If no such row is found, no change
+** change is added to the changeset. If no such row is found, no change
** is added to the changeset.
**
-** <li> For each record generated by an update or delete, the database is
+** <li> For each record generated by an update or delete, the database is
** queried for a row with a matching primary key. If such a row is
** found and one or more of the non-primary key fields have been
-** modified from their original values, an UPDATE change is added to
-** the changeset. Or, if no such row is found in the table, a DELETE
+** modified from their original values, an UPDATE change is added to
+** the changeset. Or, if no such row is found in the table, a DELETE
** change is added to the changeset. If there is a row with a matching
** primary key in the database, but all fields contain their original
** values, no change is added to the changeset.
**
** This means, amongst other things, that if a row is inserted and then later
** deleted while a session object is active, neither the insert nor the delete
-** will be present in the changeset. Or if a row is deleted and then later a
+** will be present in the changeset. Or if a row is deleted and then later a
** row with the same primary key values inserted while a session object is
** active, the resulting changeset will contain an UPDATE change instead of
** a DELETE and an INSERT.
** it does not accumulate records when rows are inserted, updated or deleted.
** This may appear to have some counter-intuitive effects if a single row
** is written to more than once during a session. For example, if a row
-** is inserted while a session object is enabled, then later deleted while
+** is inserted while a session object is enabled, then later deleted while
** the same session object is disabled, no INSERT record will appear in the
** changeset, even though the delete took place while the session was disabled.
-** Or, if one field of a row is updated while a session is disabled, and
+** Or, if one field of a row is updated while a session is disabled, and
** another field of the same row is updated while the session is enabled, the
** resulting changeset will contain an UPDATE change that updates both fields.
*/
);
/*
-** CAPI3REF: Load The Difference Between Tables Into A Session
+** CAPI3REF: Load The Difference Between Tables Into A Session
**
** If it is not already attached to the session object passed as the first
** argument, this function attaches table zTbl in the same manner as the
** an error).
**
** Argument zFromDb must be the name of a database ("main", "temp" etc.)
-** attached to the same database handle as the session object that contains
+** attached to the same database handle as the session object that contains
** a table compatible with the table attached to the session by this function.
** A table is considered compatible if it:
**
** APIs, tables without PRIMARY KEYs are simply ignored.
**
** This function adds a set of changes to the session object that could be
-** used to update the table in database zFrom (call this the "from-table")
-** so that its content is the same as the table attached to the session
+** used to update the table in database zFrom (call this the "from-table")
+** so that its content is the same as the table attached to the session
** object (call this the "to-table"). Specifically:
**
** <ul>
-** <li> For each row (primary key) that exists in the to-table but not in
+** <li> For each row (primary key) that exists in the to-table but not in
** the from-table, an INSERT record is added to the session object.
**
-** <li> For each row (primary key) that exists in the to-table but not in
+** <li> For each row (primary key) that exists in the to-table but not in
** the from-table, a DELETE record is added to the session object.
**
-** <li> For each row (primary key) that exists in both tables, but features
+** <li> For each row (primary key) that exists in both tables, but features
** different non-PK values in each, an UPDATE record is added to the
-** session.
+** session.
** </ul>
**
** To clarify, if this function is called and then a changeset constructed
-** using [sqlite3session_changeset()], then after applying that changeset to
-** database zFrom the contents of the two compatible tables would be
+** using [sqlite3session_changeset()], then after applying that changeset to
+** database zFrom the contents of the two compatible tables would be
** identical.
**
** It an error if database zFrom does not exist or does not contain the
**
** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
-** may be set to point to a buffer containing an English language error
+** may be set to point to a buffer containing an English language error
** message. It is the responsibility of the caller to free this buffer using
** sqlite3_free().
*/
** The differences between a patchset and a changeset are that:
**
** <ul>
-** <li> DELETE records consist of the primary key fields only. The
+** <li> DELETE records consist of the primary key fields only. The
** original values of other fields are omitted.
-** <li> The original values of any modified fields are omitted from
+** <li> The original values of any modified fields are omitted from
** UPDATE records.
** </ul>
**
-** A patchset blob may be used with up to date versions of all
-** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
+** A patchset blob may be used with up to date versions of all
+** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
** attempting to use a patchset blob with old versions of the
-** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
+** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
**
-** Because the non-primary key "old.*" fields are omitted, no
+** Because the non-primary key "old.*" fields are omitted, no
** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
** is passed to the sqlite3changeset_apply() API. Other conflict types work
** in the same way as for changesets.
/*
** CAPI3REF: Test if a changeset has recorded any changes.
**
-** Return non-zero if no changes to attached tables have been recorded by
-** the session object passed as the first argument. Otherwise, if one or
+** Return non-zero if no changes to attached tables have been recorded by
+** the session object passed as the first argument. Otherwise, if one or
** more changes have been recorded, return zero.
**
** Even if this function returns zero, it is possible that calling
** [sqlite3session_changeset()] on the session handle may still return a
-** changeset that contains no changes. This can happen when a row in
-** an attached table is modified and then later on the original values
+** changeset that contains no changes. This can happen when a row in
+** an attached table is modified and then later on the original values
** are restored. However, if this function returns non-zero, then it is
-** guaranteed that a call to sqlite3session_changeset() will return a
+** guaranteed that a call to sqlite3session_changeset() will return a
** changeset containing zero changes.
*/
SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
/*
-** CAPI3REF: Create An Iterator To Traverse A Changeset
+** CAPI3REF: Create An Iterator To Traverse A Changeset
**
** Create an iterator used to iterate through the contents of a changeset.
** If successful, *pp is set to point to the iterator handle and SQLITE_OK
** is returned. Otherwise, if an error occurs, *pp is set to zero and an
** SQLite error code is returned.
**
-** The following functions can be used to advance and query a changeset
+** The following functions can be used to advance and query a changeset
** iterator created by this function:
**
** <ul>
**
** Assuming the changeset blob was created by one of the
** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
-** [sqlite3changeset_invert()] functions, all changes within the changeset
-** that apply to a single table are grouped together. This means that when
-** an application iterates through a changeset using an iterator created by
-** this function, all changes that relate to a single table are visited
-** consecutively. There is no chance that the iterator will visit a change
-** the applies to table X, then one for table Y, and then later on visit
+** [sqlite3changeset_invert()] functions, all changes within the changeset
+** that apply to a single table are grouped together. This means that when
+** an application iterates through a changeset using an iterator created by
+** this function, all changes that relate to a single table are visited
+** consecutively. There is no chance that the iterator will visit a change
+** the applies to table X, then one for table Y, and then later on visit
** another change for table X.
*/
SQLITE_API int sqlite3changeset_start(
** point to the first change in the changeset. Each subsequent call advances
** the iterator to point to the next change in the changeset (if any). If
** no error occurs and the iterator points to a valid change after a call
-** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
+** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
** Otherwise, if all changes in the changeset have already been visited,
** SQLITE_DONE is returned.
**
-** If an error occurs, an SQLite error code is returned. Possible error
-** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
+** If an error occurs, an SQLite error code is returned. Possible error
+** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
** SQLITE_NOMEM.
*/
SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
** If argument pzTab is not NULL, then *pzTab is set to point to a
** nul-terminated utf-8 encoded string containing the name of the table
** affected by the current change. The buffer remains valid until either
-** sqlite3changeset_next() is called on the iterator or until the
-** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
+** sqlite3changeset_next() is called on the iterator or until the
+** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
** set to the number of columns in the table affected by the change. If
** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
** is an indirect change, or false (0) otherwise. See the documentation for
** [sqlite3session_indirect()] for a description of direct and indirect
-** changes. Finally, if pOp is not NULL, then *pOp is set to one of
-** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
+** changes. Finally, if pOp is not NULL, then *pOp is set to one of
+** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
** type of change that the iterator currently points to.
**
** If no error occurs, SQLITE_OK is returned. If an error does occur, an
** The pIter argument passed to this function may either be an iterator
** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
** created by [sqlite3changeset_start()]. In the latter case, the most recent
-** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
** Furthermore, it may only be called if the type of change that the iterator
** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
**
** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the vector of
+** sqlite3_value object containing the iVal'th value from the vector of
** original row values stored as part of the UPDATE or DELETE change and
-** returns SQLITE_OK. The name of the function comes from the fact that this
+** returns SQLITE_OK. The name of the function comes from the fact that this
** is similar to the "old.*" columns available to update or delete triggers.
**
** If some other error occurs (e.g. an OOM condition), an SQLite error code
** The pIter argument passed to this function may either be an iterator
** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
** created by [sqlite3changeset_start()]. In the latter case, the most recent
-** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
** Furthermore, it may only be called if the type of change that the iterator
** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
**
** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the vector of
+** sqlite3_value object containing the iVal'th value from the vector of
** new row values stored as part of the UPDATE or INSERT change and
** returns SQLITE_OK. If the change is an UPDATE and does not include
-** a new value for the requested column, *ppValue is set to NULL and
-** SQLITE_OK returned. The name of the function comes from the fact that
-** this is similar to the "new.*" columns available to update or delete
+** a new value for the requested column, *ppValue is set to NULL and
+** SQLITE_OK returned. The name of the function comes from the fact that
+** this is similar to the "new.*" columns available to update or delete
** triggers.
**
** If some other error occurs (e.g. an OOM condition), an SQLite error code
** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
**
** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the
+** sqlite3_value object containing the iVal'th value from the
** "conflicting row" associated with the current conflict-handler callback
** and returns SQLITE_OK.
**
** call has no effect.
**
** If an error was encountered within a call to an sqlite3changeset_xxx()
-** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
+** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
** to that error is returned by this function. Otherwise, SQLITE_OK is
** returned. This is to allow the following pattern (pseudo-code):
** }
** rc = sqlite3changeset_finalize();
** if( rc!=SQLITE_OK ){
-** // An error has occurred
+** // An error has occurred
** }
*/
SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
** zeroed and an SQLite error code returned.
**
** It is the responsibility of the caller to eventually call sqlite3_free()
-** on the *ppOut pointer to free the buffer allocation following a successful
+** on the *ppOut pointer to free the buffer allocation following a successful
** call to this function.
**
** WARNING/TODO: This function currently assumes that the input is a valid
/*
** CAPI3REF: Concatenate Two Changeset Objects
**
-** This function is used to concatenate two changesets, A and B, into a
+** This function is used to concatenate two changesets, A and B, into a
** single changeset. The result is a changeset equivalent to applying
-** changeset A followed by changeset B.
+** changeset A followed by changeset B.
**
-** This function combines the two input changesets using an
+** This function combines the two input changesets using an
** sqlite3_changegroup object. Calling it produces similar results as the
** following code fragment:
**
**
** If successful, this function returns SQLITE_OK and populates (*pp) with
** a pointer to a new sqlite3_changegroup object before returning. The caller
-** should eventually free the returned object using a call to
+** should eventually free the returned object using a call to
** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
**
** <li> Zero or more changesets (or patchsets) are added to the object
** by calling sqlite3changegroup_add().
**
-** <li> The result of combining all input changesets together is obtained
+** <li> The result of combining all input changesets together is obtained
** by the application via a call to sqlite3changegroup_output().
**
** <li> The object is deleted using a call to sqlite3changegroup_delete().
** Any number of calls to add() and output() may be made between the calls to
** new() and delete(), and in any order.
**
-** As well as the regular sqlite3changegroup_add() and
+** As well as the regular sqlite3changegroup_add() and
** sqlite3changegroup_output() functions, also available are the streaming
** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
*/
** CAPI3REF: Add A Changeset To A Changegroup
**
** Add all changes within the changeset (or patchset) in buffer pData (size
-** nData bytes) to the changegroup.
+** nData bytes) to the changegroup.
**
** If the buffer contains a patchset, then all prior calls to this function
** on the same changegroup object must also have specified patchsets. Or, if
** changeset was recorded immediately after the changesets already
** added to the changegroup.
** <tr><td>INSERT <td>UPDATE <td>
-** The INSERT change remains in the changegroup. The values in the
+** The INSERT change remains in the changegroup. The values in the
** INSERT change are modified as if the row was inserted by the
** existing change and then updated according to the new change.
** <tr><td>INSERT <td>DELETE <td>
** changeset was recorded immediately after the changesets already
** added to the changegroup.
** <tr><td>UPDATE <td>UPDATE <td>
-** The existing UPDATE remains within the changegroup. It is amended
-** so that the accompanying values are as if the row was updated once
+** The existing UPDATE remains within the changegroup. It is amended
+** so that the accompanying values are as if the row was updated once
** by the existing change and then again by the new change.
** <tr><td>UPDATE <td>DELETE <td>
** The existing UPDATE is replaced by the new DELETE within the
** changegroup.
** <tr><td>DELETE <td>INSERT <td>
** If one or more of the column values in the row inserted by the
-** new change differ from those in the row deleted by the existing
+** new change differ from those in the row deleted by the existing
** change, the existing DELETE is replaced by an UPDATE within the
-** changegroup. Otherwise, if the inserted row is exactly the same
+** changegroup. Otherwise, if the inserted row is exactly the same
** as the deleted row, the existing DELETE is simply discarded.
** <tr><td>DELETE <td>UPDATE <td>
** The new change is ignored. This case does not occur if the new
**
** If an error occurs, an SQLite error code is returned and the output
** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
-** is returned and the output variables are set to the size of and a
+** is returned and the output variables are set to the size of and a
** pointer to the output buffer, respectively. In this case it is the
** responsibility of the caller to eventually free the buffer using a
** call to sqlite3_free().
** change in the changeset, the filter callback is invoked with
** the table name as the second argument, and a copy of the context pointer
** passed as the sixth argument to this function as the first. If the "filter
-** callback" returns zero, then no attempt is made to apply any changes to
+** callback" returns zero, then no attempt is made to apply any changes to
** the table. Otherwise, if the return value is non-zero or the xFilter
** argument to this function is NULL, all changes related to the table are
** attempted.
**
-** For each table that is not excluded by the filter callback, this function
-** tests that the target database contains a compatible table. A table is
+** For each table that is not excluded by the filter callback, this function
+** tests that the target database contains a compatible table. A table is
** considered compatible if all of the following are true:
**
** <ul>
-** <li> The table has the same name as the name recorded in the
+** <li> The table has the same name as the name recorded in the
** changeset, and
-** <li> The table has at least as many columns as recorded in the
+** <li> The table has at least as many columns as recorded in the
** changeset, and
-** <li> The table has primary key columns in the same position as
+** <li> The table has primary key columns in the same position as
** recorded in the changeset.
** </ul>
**
** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
** one such warning is issued for each table in the changeset.
**
-** For each change for which there is a compatible table, an attempt is made
-** to modify the table contents according to the UPDATE, INSERT or DELETE
-** change. If a change cannot be applied cleanly, the conflict handler
-** function passed as the fifth argument to sqlite3changeset_apply() may be
-** invoked. A description of exactly when the conflict handler is invoked for
+** For each change for which there is a compatible table, an attempt is made
+** to modify the table contents according to the UPDATE, INSERT or DELETE
+** change. If a change cannot be applied cleanly, the conflict handler
+** function passed as the fifth argument to sqlite3changeset_apply() may be
+** invoked. A description of exactly when the conflict handler is invoked for
** each type of change is below.
**
** Unlike the xFilter argument, xConflict may not be passed NULL. The results
** argument are undefined.
**
** Each time the conflict handler function is invoked, it must return one
-** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
+** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
** if the second argument passed to the conflict handler is either
** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
** returns an illegal value, any changes already made are rolled back and
-** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
+** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
** actions are taken by sqlite3changeset_apply() depending on the value
** returned by each invocation of the conflict-handler function. Refer to
-** the documentation for the three
+** the documentation for the three
** [SQLITE_CHANGESET_OMIT|available return values] for details.
**
** <dl>
** <dt>DELETE Changes<dd>
-** For each DELETE change, this function checks if the target database
-** contains a row with the same primary key value (or values) as the
-** original row values stored in the changeset. If it does, and the values
-** stored in all non-primary key columns also match the values stored in
+** For each DELETE change, this function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
+** stored in all non-primary key columns also match the values stored in
** the changeset the row is deleted from the target database.
**
** If a row with matching primary key values is found, but one or more of
** database table, the trailing fields are populated with their default
** values.
**
-** If the attempt to insert the row fails because the database already
+** If the attempt to insert the row fails because the database already
** contains a row with the same primary key values, the conflict handler
-** function is invoked with the second argument set to
+** function is invoked with the second argument set to
** [SQLITE_CHANGESET_CONFLICT].
**
** If the attempt to insert the row fails because of some other constraint
-** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
+** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
** invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
-** This includes the case where the INSERT operation is re-attempted because
-** an earlier call to the conflict handler function returned
+** This includes the case where the INSERT operation is re-attempted because
+** an earlier call to the conflict handler function returned
** [SQLITE_CHANGESET_REPLACE].
**
** <dt>UPDATE Changes<dd>
-** For each UPDATE change, this function checks if the target database
-** contains a row with the same primary key value (or values) as the
-** original row values stored in the changeset. If it does, and the values
+** For each UPDATE change, this function checks if the target database
+** contains a row with the same primary key value (or values) as the
+** original row values stored in the changeset. If it does, and the values
** stored in all modified non-primary key columns also match the values
** stored in the changeset the row is updated within the target database.
**
** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
** passed as the second argument.
**
-** If the UPDATE operation is attempted, but SQLite returns
-** SQLITE_CONSTRAINT, the conflict-handler function is invoked with
+** If the UPDATE operation is attempted, but SQLite returns
+** SQLITE_CONSTRAINT, the conflict-handler function is invoked with
** [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
-** This includes the case where the UPDATE operation is attempted after
+** This includes the case where the UPDATE operation is attempted after
** an earlier call to the conflict handler function returned
-** [SQLITE_CHANGESET_REPLACE].
+** [SQLITE_CHANGESET_REPLACE].
** </dl>
**
** It is safe to execute SQL statements, including those that write to the
** All changes made by this function are enclosed in a savepoint transaction.
** If any other error (aside from a constraint failure when attempting to
** write to the target database) occurs, then the savepoint transaction is
-** rolled back, restoring the target database to its original state, and an
+** rolled back, restoring the target database to its original state, and an
** SQLite error code returned.
*/
SQLITE_API int sqlite3changeset_apply(
void *pCtx /* First argument passed to xConflict */
);
-/*
+/*
** CAPI3REF: Constants Passed To The Conflict Handler
**
** Values that may be passed as the second argument to a conflict-handler.
** <dt>SQLITE_CHANGESET_DATA<dd>
** The conflict handler is invoked with CHANGESET_DATA as the second argument
** when processing a DELETE or UPDATE change if a row with the required
-** PRIMARY KEY fields is present in the database, but one or more other
-** (non primary-key) fields modified by the update do not contain the
+** PRIMARY KEY fields is present in the database, but one or more other
+** (non primary-key) fields modified by the update do not contain the
** expected "before" values.
-**
+**
** The conflicting row, in this case, is the database row with the matching
** primary key.
-**
+**
** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
** The conflict handler is invoked with CHANGESET_NOTFOUND as the second
** argument when processing a DELETE or UPDATE change if a row with the
** required PRIMARY KEY fields is not present in the database.
-**
+**
** There is no conflicting row in this case. The results of invoking the
** sqlite3changeset_conflict() API are undefined.
-**
+**
** <dt>SQLITE_CHANGESET_CONFLICT<dd>
** CHANGESET_CONFLICT is passed as the second argument to the conflict
-** handler while processing an INSERT change if the operation would result
+** handler while processing an INSERT change if the operation would result
** in duplicate primary key values.
-**
+**
** The conflicting row in this case is the database row with the matching
** primary key.
**
** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
** If foreign key handling is enabled, and applying a changeset leaves the
-** database in a state containing foreign key violations, the conflict
+** database in a state containing foreign key violations, the conflict
** handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
** exactly once before the changeset is committed. If the conflict handler
** returns CHANGESET_OMIT, the changes, including those that caused the
** No current or conflicting row information is provided. The only function
** it is possible to call on the supplied sqlite3_changeset_iter handle
** is sqlite3changeset_fk_conflicts().
-**
+**
** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
-** If any other constraint violation occurs while applying a change (i.e.
-** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
+** If any other constraint violation occurs while applying a change (i.e.
+** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
** invoked with CHANGESET_CONSTRAINT as the second argument.
-**
+**
** There is no conflicting row in this case. The results of invoking the
** sqlite3changeset_conflict() API are undefined.
**
#define SQLITE_CHANGESET_CONSTRAINT 4
#define SQLITE_CHANGESET_FOREIGN_KEY 5
-/*
+/*
** CAPI3REF: Constants Returned By The Conflict Handler
**
** A conflict handler callback must return one of the following three values.
** <dl>
** <dt>SQLITE_CHANGESET_OMIT<dd>
** If a conflict handler returns this value no special action is taken. The
-** change that caused the conflict is not applied. The session module
+** change that caused the conflict is not applied. The session module
** continues to the next change in the changeset.
**
** <dt>SQLITE_CHANGESET_REPLACE<dd>
** This value may only be returned if the second argument to the conflict
** handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
-** is not the case, any changes applied so far are rolled back and the
+** is not the case, any changes applied so far are rolled back and the
** call to sqlite3changeset_apply() returns SQLITE_MISUSE.
**
** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
** the original row is restored to the database before continuing.
**
** <dt>SQLITE_CHANGESET_ABORT<dd>
-** If this value is returned, any changes applied so far are rolled back
+** If this value is returned, any changes applied so far are rolled back
** and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
** </dl>
*/
/*
** CAPI3REF: Streaming Versions of API functions.
**
-** The six streaming API xxx_strm() functions serve similar purposes to the
+** The six streaming API xxx_strm() functions serve similar purposes to the
** corresponding non-streaming API functions:
**
** <table border=1 style="margin-left:8ex;margin-right:8ex">
** <tr><th>Streaming function<th>Non-streaming equivalent</th>
-** <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply]
-** <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat]
-** <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert]
-** <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start]
-** <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset]
-** <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset]
+** <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply]
+** <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat]
+** <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert]
+** <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start]
+** <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset]
+** <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset]
** </table>
**
** Non-streaming functions that accept changesets (or patchsets) as input
-** require that the entire changeset be stored in a single buffer in memory.
-** Similarly, those that return a changeset or patchset do so by returning
-** a pointer to a single large buffer allocated using sqlite3_malloc().
-** Normally this is convenient. However, if an application running in a
+** require that the entire changeset be stored in a single buffer in memory.
+** Similarly, those that return a changeset or patchset do so by returning
+** a pointer to a single large buffer allocated using sqlite3_malloc().
+** Normally this is convenient. However, if an application running in a
** low-memory environment is required to handle very large changesets, the
** large contiguous memory allocations required can become onerous.
**
** </pre>
**
** Each time the xInput callback is invoked by the sessions module, the first
-** argument passed is a copy of the supplied pIn context pointer. The second
-** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
-** error occurs the xInput method should copy up to (*pnData) bytes of data
-** into the buffer and set (*pnData) to the actual number of bytes copied
-** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
-** should be set to zero to indicate this. Or, if an error occurs, an SQLite
+** argument passed is a copy of the supplied pIn context pointer. The second
+** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
+** error occurs the xInput method should copy up to (*pnData) bytes of data
+** into the buffer and set (*pnData) to the actual number of bytes copied
+** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
+** should be set to zero to indicate this. Or, if an error occurs, an SQLite
** error code should be returned. In all cases, if an xInput callback returns
** an error, all processing is abandoned and the streaming API function
** returns a copy of the error code to the caller.
** In the case of sqlite3changeset_start_strm(), the xInput callback may be
** invoked by the sessions module at any point during the lifetime of the
** iterator. If such an xInput callback returns an error, the iterator enters
-** an error state, whereby all subsequent calls to iterator functions
+** an error state, whereby all subsequent calls to iterator functions
** immediately fail with the same error code as returned by xInput.
**
** Similarly, streaming API functions that return changesets (or patchsets)
** is immediately abandoned and the streaming API function returns a copy
** of the xOutput error code to the application.
**
-** The sessions module never invokes an xOutput callback with the third
+** The sessions module never invokes an xOutput callback with the third
** parameter set to a value less than or equal to zero. Other than this,
** no guarantees are made as to the size of the chunks of data returned.
*/
int (*xOutput)(void *pOut, const void *pData, int nData),
void *pOut
);
-SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*,
+SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*,
int (*xInput)(void *pIn, void *pData, int *pnData),
void *pIn
);
SQLITE_API int sqlite3changegroup_output_strm(sqlite3_changegroup*,
- int (*xOutput)(void *pOut, const void *pData, int nData),
+ int (*xOutput)(void *pOut, const void *pData, int nData),
void *pOut
);
**
******************************************************************************
**
-** Interfaces to extend FTS5. Using the interfaces defined in this file,
+** Interfaces to extend FTS5. Using the interfaces defined in this file,
** FTS5 may be extended with:
**
** * custom tokenizers, and
** EXTENSION API FUNCTIONS
**
** xUserData(pFts):
-** Return a copy of the context pointer the extension function was
+** Return a copy of the context pointer the extension function was
** registered with.
**
** xColumnTotalSize(pFts, iCol, pnToken):
** If parameter iCol is less than zero, set output variable *pnToken
** to the total number of tokens in the FTS5 table. Or, if iCol is
** non-negative but less than the number of columns in the table, return
-** the total number of tokens in column iCol, considering all rows in
+** the total number of tokens in column iCol, considering all rows in
** the FTS5 table.
**
** If parameter iCol is greater than or equal to the number of columns
** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
-** an OOM condition or IO error), an appropriate SQLite error code is
+** an OOM condition or IO error), an appropriate SQLite error code is
** returned.
**
** xColumnCount(pFts):
**
** If parameter iCol is greater than or equal to the number of columns
** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
-** an OOM condition or IO error), an appropriate SQLite error code is
+** an OOM condition or IO error), an appropriate SQLite error code is
** returned.
**
** This function may be quite inefficient if used with an FTS5 table
** an error code (i.e. SQLITE_NOMEM) if an error occurs.
**
** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" or "detail=column" option. If the FTS5 table is created
-** with either "detail=none" or "detail=column" and "content=" option
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
** (i.e. if it is a contentless table), then this API always returns 0.
**
** xInst:
** with the offsets=0 option specified. In this case *piOff is always
** set to -1.
**
-** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
+** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
** if an error occurs.
**
** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" or "detail=column" option.
+** "detail=none" or "detail=column" option.
**
** xRowid:
** Returns the rowid of the current row.
**
** with $p set to a phrase equivalent to the phrase iPhrase of the
** current query is executed. Any column filter that applies to
-** phrase iPhrase of the current query is included in $p. For each
-** row visited, the callback function passed as the fourth argument
-** is invoked. The context and API objects passed to the callback
+** phrase iPhrase of the current query is included in $p. For each
+** row visited, the callback function passed as the fourth argument
+** is invoked. The context and API objects passed to the callback
** function may be used to access the properties of each matched row.
-** Invoking Api.xUserData() returns a copy of the pointer passed as
+** Invoking Api.xUserData() returns a copy of the pointer passed as
** the third argument to pUserData.
**
** If the callback function returns any value other than SQLITE_OK, the
**
** xSetAuxdata(pFts5, pAux, xDelete)
**
-** Save the pointer passed as the second argument as the extension functions
+** Save the pointer passed as the second argument as the extension functions
** "auxiliary data". The pointer may then be retrieved by the current or any
** future invocation of the same fts5 extension function made as part of
** of the same MATCH query using the xGetAuxdata() API.
**
** Each extension function is allocated a single auxiliary data slot for
-** each FTS query (MATCH expression). If the extension function is invoked
-** more than once for a single FTS query, then all invocations share a
+** each FTS query (MATCH expression). If the extension function is invoked
+** more than once for a single FTS query, then all invocations share a
** single auxiliary data context.
**
** If there is already an auxiliary data pointer when this function is
**
** xGetAuxdata(pFts5, bClear)
**
-** Returns the current auxiliary data pointer for the fts5 extension
+** Returns the current auxiliary data pointer for the fts5 extension
** function. See the xSetAuxdata() method for details.
**
** If the bClear argument is non-zero, then the auxiliary data is cleared
** method, to iterate through all instances of a single query phrase within
** the current row. This is the same information as is accessible via the
** xInstCount/xInst APIs. While the xInstCount/xInst APIs are more convenient
-** to use, this API may be faster under some circumstances. To iterate
+** to use, this API may be faster under some circumstances. To iterate
** through instances of phrase iPhrase, use the following code:
**
** Fts5PhraseIter iter;
** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
**
** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" or "detail=column" option. If the FTS5 table is created
-** with either "detail=none" or "detail=column" and "content=" option
+** "detail=none" or "detail=column" option. If the FTS5 table is created
+** with either "detail=none" or "detail=column" and "content=" option
** (i.e. if it is a contentless table), then this API always iterates
** through an empty set (all calls to xPhraseFirst() set iCol to -1).
**
** }
**
** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" option. If the FTS5 table is created with either
-** "detail=none" "content=" option (i.e. if it is a contentless table),
-** then this API always iterates through an empty set (all calls to
+** "detail=none" option. If the FTS5 table is created with either
+** "detail=none" "content=" option (i.e. if it is a contentless table),
+** then this API always iterates through an empty set (all calls to
** xPhraseFirstColumn() set iCol to -1).
**
** The information accessed using this API and its companion
** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
** (or xInst/xInstCount). The chief advantage of this API is that it is
** significantly more efficient than those alternatives when used with
-** "detail=column" tables.
+** "detail=column" tables.
**
** xPhraseNextColumn()
** See xPhraseFirstColumn above.
int (*xRowCount)(Fts5Context*, sqlite3_int64 *pnRow);
int (*xColumnTotalSize)(Fts5Context*, int iCol, sqlite3_int64 *pnToken);
- int (*xTokenize)(Fts5Context*,
+ int (*xTokenize)(Fts5Context*,
const char *pText, int nText, /* Text to tokenize */
void *pCtx, /* Context passed to xToken() */
int (*xToken)(void*, int, const char*, int, int, int) /* Callback */
void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
};
-/*
+/*
** CUSTOM AUXILIARY FUNCTIONS
*************************************************************************/
/*************************************************************************
** CUSTOM TOKENIZERS
**
-** Applications may also register custom tokenizer types. A tokenizer
-** is registered by providing fts5 with a populated instance of the
+** Applications may also register custom tokenizer types. A tokenizer
+** is registered by providing fts5 with a populated instance of the
** following structure. All structure methods must be defined, setting
** any member of the fts5_tokenizer struct to NULL leads to undefined
** behaviour. The structure methods are expected to function as follows:
**
** The first argument passed to this function is a copy of the (void*)
** pointer provided by the application when the fts5_tokenizer object
-** was registered with FTS5 (the third argument to xCreateTokenizer()).
+** was registered with FTS5 (the third argument to xCreateTokenizer()).
** The second and third arguments are an array of nul-terminated strings
** containing the tokenizer arguments, if any, specified following the
** tokenizer name as part of the CREATE VIRTUAL TABLE statement used
** to create the FTS5 table.
**
-** The final argument is an output variable. If successful, (*ppOut)
+** The final argument is an output variable. If successful, (*ppOut)
** should be set to point to the new tokenizer handle and SQLITE_OK
** returned. If an error occurs, some value other than SQLITE_OK should
-** be returned. In this case, fts5 assumes that the final value of *ppOut
+** be returned. In this case, fts5 assumes that the final value of *ppOut
** is undefined.
**
** xDelete:
** be invoked exactly once for each successful call to xCreate().
**
** xTokenize:
-** This function is expected to tokenize the nText byte string indicated
+** This function is expected to tokenize the nText byte string indicated
** by argument pText. pText may or may not be nul-terminated. The first
** argument passed to this function is a pointer to an Fts5Tokenizer object
** returned by an earlier call to xCreate().
** determine the set of tokens to add to (or delete from) the
** FTS index.
**
-** <li> <b>FTS5_TOKENIZE_QUERY</b> - A MATCH query is being executed
-** against the FTS index. The tokenizer is being called to tokenize
+** <li> <b>FTS5_TOKENIZE_QUERY</b> - A MATCH query is being executed
+** against the FTS index. The tokenizer is being called to tokenize
** a bareword or quoted string specified as part of the query.
**
** <li> <b>(FTS5_TOKENIZE_QUERY | FTS5_TOKENIZE_PREFIX)</b> - Same as
** followed by a "*" character, indicating that the last token
** returned by the tokenizer will be treated as a token prefix.
**
-** <li> <b>FTS5_TOKENIZE_AUX</b> - The tokenizer is being invoked to
+** <li> <b>FTS5_TOKENIZE_AUX</b> - The tokenizer is being invoked to
** satisfy an fts5_api.xTokenize() request made by an auxiliary
** function. Or an fts5_api.xColumnSize() request made by the same
-** on a columnsize=0 database.
+** on a columnsize=0 database.
** </ul>
**
** For each token in the input string, the supplied callback xToken() must
** which the token is derived within the input.
**
** The second argument passed to the xToken() callback ("tflags") should
-** normally be set to 0. The exception is if the tokenizer supports
+** normally be set to 0. The exception is if the tokenizer supports
** synonyms. In this case see the discussion below for details.
**
-** FTS5 assumes the xToken() callback is invoked for each token in the
+** FTS5 assumes the xToken() callback is invoked for each token in the
** order that they occur within the input text.
**
** If an xToken() callback returns any value other than SQLITE_OK, then
** SYNONYM SUPPORT
**
** Custom tokenizers may also support synonyms. Consider a case in which a
-** user wishes to query for a phrase such as "first place". Using the
+** user wishes to query for a phrase such as "first place". Using the
** built-in tokenizers, the FTS5 query 'first + place' will match instances
** of "first place" within the document set, but not alternative forms
** such as "1st place". In some applications, it would be better to match
**
** There are several ways to approach this in FTS5:
**
-** <ol><li> By mapping all synonyms to a single token. In this case, the
+** <ol><li> By mapping all synonyms to a single token. In this case, the
** In the above example, this means that the tokenizer returns the
** same token for inputs "first" and "1st". Say that token is in
** fact "first", so that when the user inserts the document "I won
** as expected.
**
** <li> By adding multiple synonyms for a single term to the FTS index.
-** In this case, when tokenizing query text, the tokenizer may
+** In this case, when tokenizing query text, the tokenizer may
** provide multiple synonyms for a single term within the document.
** FTS5 then queries the index for each synonym individually. For
** example, faced with the query:
** ... MATCH 'first place'</codeblock>
**
** the tokenizer offers both "1st" and "first" as synonyms for the
-** first token in the MATCH query and FTS5 effectively runs a query
+** first token in the MATCH query and FTS5 effectively runs a query
** similar to:
**
** <codeblock>
** ... MATCH '(first OR 1st) place'</codeblock>
**
** except that, for the purposes of auxiliary functions, the query
-** still appears to contain just two phrases - "(first OR 1st)"
+** still appears to contain just two phrases - "(first OR 1st)"
** being treated as a single phrase.
**
** <li> By adding multiple synonyms for a single term to the FTS index.
** Using this method, when tokenizing document text, the tokenizer
-** provides multiple synonyms for each token. So that when a
+** provides multiple synonyms for each token. So that when a
** document such as "I won first place" is tokenized, entries are
** added to the FTS index for "i", "won", "first", "1st" and
** "place".
**
** This way, even if the tokenizer does not provide synonyms
** when tokenizing query text (it should not - to do would be
-** inefficient), it doesn't matter if the user queries for
+** inefficient), it doesn't matter if the user queries for
** 'first + place' or '1st + place', as there are entires in the
** FTS index corresponding to both forms of the first token.
** </ol>
**
** It is an error to specify the FTS5_TOKEN_COLOCATED flag the first time
** xToken() is called. Multiple synonyms may be specified for a single token
-** by making multiple calls to xToken(FTS5_TOKEN_COLOCATED) in sequence.
+** by making multiple calls to xToken(FTS5_TOKEN_COLOCATED) in sequence.
** There is no limit to the number of synonyms that may be provided for a
** single token.
**
-** In many cases, method (1) above is the best approach. It does not add
+** In many cases, method (1) above is the best approach. It does not add
** extra data to the FTS index or require FTS5 to query for multiple terms,
** so it is efficient in terms of disk space and query speed. However, it
** does not support prefix queries very well. If, as suggested above, the
** will not match documents that contain the token "1st" (as the tokenizer
** will probably not map "1s" to any prefix of "first").
**
-** For full prefix support, method (3) may be preferred. In this case,
+** For full prefix support, method (3) may be preferred. In this case,
** because the index contains entries for both "first" and "1st", prefix
** queries such as 'fi*' or '1s*' will match correctly. However, because
** extra entries are added to the FTS index, this method uses more space
** within the database.
**
** Method (2) offers a midpoint between (1) and (3). Using this method,
-** a query such as '1s*' will match documents that contain the literal
+** a query such as '1s*' will match documents that contain the literal
** token "1st", but not "first" (assuming the tokenizer is not able to
** provide synonyms for prefixes). However, a non-prefix query like '1st'
** will match against "1st" and "first". This method does not require
-** extra disk space, as no extra entries are added to the FTS index.
+** extra disk space, as no extra entries are added to the FTS index.
** On the other hand, it may require more CPU cycles to run MATCH queries,
** as separate queries of the FTS index are required for each synonym.
**
struct fts5_tokenizer {
int (*xCreate)(void*, const char **azArg, int nArg, Fts5Tokenizer **ppOut);
void (*xDelete)(Fts5Tokenizer*);
- int (*xTokenize)(Fts5Tokenizer*,
+ int (*xTokenize)(Fts5Tokenizer*,
void *pCtx,
int flags, /* Mask of FTS5_TOKENIZE_* flags */
- const char *pText, int nText,
+ const char *pText, int nText,
int (*xToken)(
void *pCtx, /* Copy of 2nd argument to xTokenize() */
int tflags, /* Mask of FTS5_TOKEN_* flags */
projects / php / commitdiff