--- /dev/null
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 < %s | FileCheck %s
+
+# LLVM-MCA-BEGIN
+movb %spl, (%rax)
+movb (%rcx), %bpl
+movb (%rdx), %sil
+movb %dil, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movw %sp, (%rax)
+movw (%rcx), %bp
+movw (%rdx), %si
+movw %di, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movl %esp, (%rax)
+movl (%rcx), %ebp
+movl (%rdx), %esi
+movl %edi, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movq %rsp, (%rax)
+movq (%rcx), %rbp
+movq (%rdx), %rsi
+movq %rdi, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movd %mm0, (%rax)
+movd (%rcx), %mm1
+movd (%rdx), %mm2
+movd %mm3, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movaps %xmm0, (%rax)
+movaps (%rcx), %xmm1
+movaps (%rdx), %xmm2
+movaps %xmm3, (%rbx)
+# LLVM-MCA-END
+
+# CHECK: [0] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 208
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.92
+# CHECK-NEXT: IPC: 1.92
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movb %spl, (%rax)
+# CHECK-NEXT: 1 5 0.50 * movb (%rcx), %bpl
+# CHECK-NEXT: 1 5 0.50 * movb (%rdx), %sil
+# CHECK-NEXT: 1 1 1.00 * movb %dil, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.7%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 34 (16.3%)
+# CHECK-NEXT: 2, 148 (71.2%)
+# CHECK-NEXT: 4, 26 (12.5%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (1.4%)
+# CHECK-NEXT: 1, 10 (4.8%)
+# CHECK-NEXT: 2, 195 (93.8%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 2.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movb %spl, (%rax)
+# CHECK-NEXT: - - - - - - 1.00 - movb (%rcx), %bpl
+# CHECK-NEXT: - - - - - - 0.95 0.05 movb (%rdx), %sil
+# CHECK-NEXT: - - - - 1.00 - 0.05 0.95 movb %dil, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456789
+
+# CHECK: [0,0] DeER . . movb %spl, (%rax)
+# CHECK-NEXT: [0,1] DeeeeeER . movb (%rcx), %bpl
+# CHECK-NEXT: [0,2] D=eeeeeER. movb (%rdx), %sil
+# CHECK-NEXT: [0,3] D======eER movb %dil, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movb %spl, (%rax)
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movb (%rcx), %bpl
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movb (%rdx), %sil
+# CHECK-NEXT: 3. 1 7.0 0.0 0.0 movb %dil, (%rbx)
+
+# CHECK: [1] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 208
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.92
+# CHECK-NEXT: IPC: 1.92
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movw %sp, (%rax)
+# CHECK-NEXT: 1 5 0.50 * movw (%rcx), %bp
+# CHECK-NEXT: 1 5 0.50 * movw (%rdx), %si
+# CHECK-NEXT: 1 1 1.00 * movw %di, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.7%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 34 (16.3%)
+# CHECK-NEXT: 2, 148 (71.2%)
+# CHECK-NEXT: 4, 26 (12.5%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (1.4%)
+# CHECK-NEXT: 1, 10 (4.8%)
+# CHECK-NEXT: 2, 195 (93.8%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 2.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movw %sp, (%rax)
+# CHECK-NEXT: - - - - - - 1.00 - movw (%rcx), %bp
+# CHECK-NEXT: - - - - - - 0.95 0.05 movw (%rdx), %si
+# CHECK-NEXT: - - - - 1.00 - 0.05 0.95 movw %di, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456789
+
+# CHECK: [0,0] DeER . . movw %sp, (%rax)
+# CHECK-NEXT: [0,1] DeeeeeER . movw (%rcx), %bp
+# CHECK-NEXT: [0,2] D=eeeeeER. movw (%rdx), %si
+# CHECK-NEXT: [0,3] D======eER movw %di, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movw %sp, (%rax)
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movw (%rcx), %bp
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movw (%rdx), %si
+# CHECK-NEXT: 3. 1 7.0 0.0 0.0 movw %di, (%rbx)
+
+# CHECK: [2] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 208
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.92
+# CHECK-NEXT: IPC: 1.92
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movl %esp, (%rax)
+# CHECK-NEXT: 1 5 0.50 * movl (%rcx), %ebp
+# CHECK-NEXT: 1 5 0.50 * movl (%rdx), %esi
+# CHECK-NEXT: 1 1 1.00 * movl %edi, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.7%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 34 (16.3%)
+# CHECK-NEXT: 2, 148 (71.2%)
+# CHECK-NEXT: 4, 26 (12.5%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (1.4%)
+# CHECK-NEXT: 1, 10 (4.8%)
+# CHECK-NEXT: 2, 195 (93.8%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 2.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movl %esp, (%rax)
+# CHECK-NEXT: - - - - - - 1.00 - movl (%rcx), %ebp
+# CHECK-NEXT: - - - - - - 0.95 0.05 movl (%rdx), %esi
+# CHECK-NEXT: - - - - 1.00 - 0.05 0.95 movl %edi, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456789
+
+# CHECK: [0,0] DeER . . movl %esp, (%rax)
+# CHECK-NEXT: [0,1] DeeeeeER . movl (%rcx), %ebp
+# CHECK-NEXT: [0,2] D=eeeeeER. movl (%rdx), %esi
+# CHECK-NEXT: [0,3] D======eER movl %edi, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movl %esp, (%rax)
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movl (%rcx), %ebp
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movl (%rdx), %esi
+# CHECK-NEXT: 3. 1 7.0 0.0 0.0 movl %edi, (%rbx)
+
+# CHECK: [3] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 208
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.92
+# CHECK-NEXT: IPC: 1.92
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movq %rsp, (%rax)
+# CHECK-NEXT: 1 5 0.50 * movq (%rcx), %rbp
+# CHECK-NEXT: 1 5 0.50 * movq (%rdx), %rsi
+# CHECK-NEXT: 1 1 1.00 * movq %rdi, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.7%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 34 (16.3%)
+# CHECK-NEXT: 2, 148 (71.2%)
+# CHECK-NEXT: 4, 26 (12.5%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (1.4%)
+# CHECK-NEXT: 1, 10 (4.8%)
+# CHECK-NEXT: 2, 195 (93.8%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 2.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movq %rsp, (%rax)
+# CHECK-NEXT: - - - - - - 1.00 - movq (%rcx), %rbp
+# CHECK-NEXT: - - - - - - 0.95 0.05 movq (%rdx), %rsi
+# CHECK-NEXT: - - - - 1.00 - 0.05 0.95 movq %rdi, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456789
+
+# CHECK: [0,0] DeER . . movq %rsp, (%rax)
+# CHECK-NEXT: [0,1] DeeeeeER . movq (%rcx), %rbp
+# CHECK-NEXT: [0,2] D=eeeeeER. movq (%rdx), %rsi
+# CHECK-NEXT: [0,3] D======eER movq %rdi, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movq %rsp, (%rax)
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movq (%rcx), %rbp
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movq (%rdx), %rsi
+# CHECK-NEXT: 3. 1 7.0 0.0 0.0 movq %rdi, (%rbx)
+
+# CHECK: [4] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 208
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.92
+# CHECK-NEXT: IPC: 1.92
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * U movd %mm0, (%rax)
+# CHECK-NEXT: 1 5 0.50 * movd (%rcx), %mm1
+# CHECK-NEXT: 1 5 0.50 * movd (%rdx), %mm2
+# CHECK-NEXT: 1 1 1.00 * U movd %mm3, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.7%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 34 (16.3%)
+# CHECK-NEXT: 2, 148 (71.2%)
+# CHECK-NEXT: 4, 26 (12.5%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (1.4%)
+# CHECK-NEXT: 1, 10 (4.8%)
+# CHECK-NEXT: 2, 195 (93.8%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 2.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movd %mm0, (%rax)
+# CHECK-NEXT: - - - - - - 1.00 - movd (%rcx), %mm1
+# CHECK-NEXT: - - - - - - 0.95 0.05 movd (%rdx), %mm2
+# CHECK-NEXT: - - - - 1.00 - 0.05 0.95 movd %mm3, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456789
+
+# CHECK: [0,0] DeER . . movd %mm0, (%rax)
+# CHECK-NEXT: [0,1] DeeeeeER . movd (%rcx), %mm1
+# CHECK-NEXT: [0,2] D=eeeeeER. movd (%rdx), %mm2
+# CHECK-NEXT: [0,3] D======eER movd %mm3, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movd %mm0, (%rax)
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movd (%rcx), %mm1
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movd (%rdx), %mm2
+# CHECK-NEXT: 3. 1 7.0 0.0 0.0 movd %mm3, (%rbx)
+
+# CHECK: [5] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 209
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.91
+# CHECK-NEXT: IPC: 1.91
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movaps %xmm0, (%rax)
+# CHECK-NEXT: 1 6 0.50 * movaps (%rcx), %xmm1
+# CHECK-NEXT: 1 6 0.50 * movaps (%rdx), %xmm2
+# CHECK-NEXT: 1 1 1.00 * movaps %xmm3, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.3%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 35 (16.7%)
+# CHECK-NEXT: 2, 148 (70.8%)
+# CHECK-NEXT: 4, 26 (12.4%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (1.4%)
+# CHECK-NEXT: 1, 12 (5.7%)
+# CHECK-NEXT: 2, 194 (92.8%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 2.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movaps %xmm0, (%rax)
+# CHECK-NEXT: - - - - - - 1.00 - movaps (%rcx), %xmm1
+# CHECK-NEXT: - - - - - - 0.94 0.06 movaps (%rdx), %xmm2
+# CHECK-NEXT: - - - - 1.00 - 0.06 0.94 movaps %xmm3, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: 0
+# CHECK-NEXT: Index 0123456789
+
+# CHECK: [0,0] DeER . . movaps %xmm0, (%rax)
+# CHECK-NEXT: [0,1] DeeeeeeER . movaps (%rcx), %xmm1
+# CHECK-NEXT: [0,2] D=eeeeeeER. movaps (%rdx), %xmm2
+# CHECK-NEXT: [0,3] D=======eER movaps %xmm3, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movaps %xmm0, (%rax)
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movaps (%rcx), %xmm1
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movaps (%rdx), %xmm2
+# CHECK-NEXT: 3. 1 8.0 0.0 0.0 movaps %xmm3, (%rbx)
--- /dev/null
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 < %s | FileCheck %s
+
+# LLVM-MCA-BEGIN
+movb (%rax), %spl
+movb (%rcx), %bpl
+movb (%rdx), %sil
+movb (%rbx), %dil
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movw (%rax), %sp
+movw (%rcx), %bp
+movw (%rdx), %si
+movw (%rbx), %di
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movl (%rax), %esp
+movl (%rcx), %ebp
+movl (%rdx), %esi
+movl (%rbx), %edi
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movq (%rax), %rsp
+movq (%rcx), %rbp
+movq (%rdx), %rsi
+movq (%rbx), %rdi
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movd (%rax), %mm0
+movd (%rcx), %mm1
+movd (%rdx), %mm2
+movd (%rbx), %mm3
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movaps (%rax), %xmm0
+movaps (%rcx), %xmm1
+movaps (%rdx), %xmm2
+movaps (%rbx), %xmm3
+# LLVM-MCA-END
+
+# CHECK: [0] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 207
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.93
+# CHECK-NEXT: IPC: 1.93
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 5 0.50 * movb (%rax), %spl
+# CHECK-NEXT: 1 5 0.50 * movb (%rcx), %bpl
+# CHECK-NEXT: 1 5 0.50 * movb (%rdx), %sil
+# CHECK-NEXT: 1 5 0.50 * movb (%rbx), %dil
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 33 (15.9%)
+# CHECK-NEXT: 2, 148 (71.5%)
+# CHECK-NEXT: 4, 26 (12.6%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 7 (3.4%)
+# CHECK-NEXT: 2, 200 (96.6%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - - - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - - - - 1.00 movb (%rax), %spl
+# CHECK-NEXT: - - - - - - 1.00 - movb (%rcx), %bpl
+# CHECK-NEXT: - - - - - - - 1.00 movb (%rdx), %sil
+# CHECK-NEXT: - - - - - - 1.00 - movb (%rbx), %dil
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 012345678
+
+# CHECK: [0,0] DeeeeeER. movb (%rax), %spl
+# CHECK-NEXT: [0,1] DeeeeeER. movb (%rcx), %bpl
+# CHECK-NEXT: [0,2] D=eeeeeER movb (%rdx), %sil
+# CHECK-NEXT: [0,3] D=eeeeeER movb (%rbx), %dil
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movb (%rax), %spl
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movb (%rcx), %bpl
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movb (%rdx), %sil
+# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movb (%rbx), %dil
+
+# CHECK: [1] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 207
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.93
+# CHECK-NEXT: IPC: 1.93
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 5 0.50 * movw (%rax), %sp
+# CHECK-NEXT: 1 5 0.50 * movw (%rcx), %bp
+# CHECK-NEXT: 1 5 0.50 * movw (%rdx), %si
+# CHECK-NEXT: 1 5 0.50 * movw (%rbx), %di
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 33 (15.9%)
+# CHECK-NEXT: 2, 148 (71.5%)
+# CHECK-NEXT: 4, 26 (12.6%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 7 (3.4%)
+# CHECK-NEXT: 2, 200 (96.6%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - - - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - - - - 1.00 movw (%rax), %sp
+# CHECK-NEXT: - - - - - - 1.00 - movw (%rcx), %bp
+# CHECK-NEXT: - - - - - - - 1.00 movw (%rdx), %si
+# CHECK-NEXT: - - - - - - 1.00 - movw (%rbx), %di
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 012345678
+
+# CHECK: [0,0] DeeeeeER. movw (%rax), %sp
+# CHECK-NEXT: [0,1] DeeeeeER. movw (%rcx), %bp
+# CHECK-NEXT: [0,2] D=eeeeeER movw (%rdx), %si
+# CHECK-NEXT: [0,3] D=eeeeeER movw (%rbx), %di
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movw (%rax), %sp
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movw (%rcx), %bp
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movw (%rdx), %si
+# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movw (%rbx), %di
+
+# CHECK: [2] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 207
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.93
+# CHECK-NEXT: IPC: 1.93
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 5 0.50 * movl (%rax), %esp
+# CHECK-NEXT: 1 5 0.50 * movl (%rcx), %ebp
+# CHECK-NEXT: 1 5 0.50 * movl (%rdx), %esi
+# CHECK-NEXT: 1 5 0.50 * movl (%rbx), %edi
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 33 (15.9%)
+# CHECK-NEXT: 2, 148 (71.5%)
+# CHECK-NEXT: 4, 26 (12.6%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 7 (3.4%)
+# CHECK-NEXT: 2, 200 (96.6%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - - - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - - - - 1.00 movl (%rax), %esp
+# CHECK-NEXT: - - - - - - 1.00 - movl (%rcx), %ebp
+# CHECK-NEXT: - - - - - - - 1.00 movl (%rdx), %esi
+# CHECK-NEXT: - - - - - - 1.00 - movl (%rbx), %edi
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 012345678
+
+# CHECK: [0,0] DeeeeeER. movl (%rax), %esp
+# CHECK-NEXT: [0,1] DeeeeeER. movl (%rcx), %ebp
+# CHECK-NEXT: [0,2] D=eeeeeER movl (%rdx), %esi
+# CHECK-NEXT: [0,3] D=eeeeeER movl (%rbx), %edi
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movl (%rax), %esp
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movl (%rcx), %ebp
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movl (%rdx), %esi
+# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movl (%rbx), %edi
+
+# CHECK: [3] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 207
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.93
+# CHECK-NEXT: IPC: 1.93
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 5 0.50 * movq (%rax), %rsp
+# CHECK-NEXT: 1 5 0.50 * movq (%rcx), %rbp
+# CHECK-NEXT: 1 5 0.50 * movq (%rdx), %rsi
+# CHECK-NEXT: 1 5 0.50 * movq (%rbx), %rdi
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 33 (15.9%)
+# CHECK-NEXT: 2, 148 (71.5%)
+# CHECK-NEXT: 4, 26 (12.6%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 7 (3.4%)
+# CHECK-NEXT: 2, 200 (96.6%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - - - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - - - - 1.00 movq (%rax), %rsp
+# CHECK-NEXT: - - - - - - 1.00 - movq (%rcx), %rbp
+# CHECK-NEXT: - - - - - - - 1.00 movq (%rdx), %rsi
+# CHECK-NEXT: - - - - - - 1.00 - movq (%rbx), %rdi
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 012345678
+
+# CHECK: [0,0] DeeeeeER. movq (%rax), %rsp
+# CHECK-NEXT: [0,1] DeeeeeER. movq (%rcx), %rbp
+# CHECK-NEXT: [0,2] D=eeeeeER movq (%rdx), %rsi
+# CHECK-NEXT: [0,3] D=eeeeeER movq (%rbx), %rdi
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movq (%rax), %rsp
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movq (%rcx), %rbp
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movq (%rdx), %rsi
+# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movq (%rbx), %rdi
+
+# CHECK: [4] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 207
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.93
+# CHECK-NEXT: IPC: 1.93
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 5 0.50 * movd (%rax), %mm0
+# CHECK-NEXT: 1 5 0.50 * movd (%rcx), %mm1
+# CHECK-NEXT: 1 5 0.50 * movd (%rdx), %mm2
+# CHECK-NEXT: 1 5 0.50 * movd (%rbx), %mm3
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (71.0%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 33 (15.9%)
+# CHECK-NEXT: 2, 148 (71.5%)
+# CHECK-NEXT: 4, 26 (12.6%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 7 (3.4%)
+# CHECK-NEXT: 2, 200 (96.6%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - - - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - - - - 1.00 movd (%rax), %mm0
+# CHECK-NEXT: - - - - - - 1.00 - movd (%rcx), %mm1
+# CHECK-NEXT: - - - - - - - 1.00 movd (%rdx), %mm2
+# CHECK-NEXT: - - - - - - 1.00 - movd (%rbx), %mm3
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 012345678
+
+# CHECK: [0,0] DeeeeeER. movd (%rax), %mm0
+# CHECK-NEXT: [0,1] DeeeeeER. movd (%rcx), %mm1
+# CHECK-NEXT: [0,2] D=eeeeeER movd (%rdx), %mm2
+# CHECK-NEXT: [0,3] D=eeeeeER movd (%rbx), %mm3
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movd (%rax), %mm0
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movd (%rcx), %mm1
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movd (%rdx), %mm2
+# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movd (%rbx), %mm3
+
+# CHECK: [5] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 208
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 1.92
+# CHECK-NEXT: IPC: 1.92
+# CHECK-NEXT: Block RThroughput: 2.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 6 0.50 * movaps (%rax), %xmm0
+# CHECK-NEXT: 1 6 0.50 * movaps (%rcx), %xmm1
+# CHECK-NEXT: 1 6 0.50 * movaps (%rdx), %xmm2
+# CHECK-NEXT: 1 6 0.50 * movaps (%rbx), %xmm3
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 147 (70.7%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 34 (16.3%)
+# CHECK-NEXT: 2, 148 (71.2%)
+# CHECK-NEXT: 4, 26 (12.5%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 8 (3.8%)
+# CHECK-NEXT: 2, 200 (96.2%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 45 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - - - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - - - - 1.00 movaps (%rax), %xmm0
+# CHECK-NEXT: - - - - - - 1.00 - movaps (%rcx), %xmm1
+# CHECK-NEXT: - - - - - - - 1.00 movaps (%rdx), %xmm2
+# CHECK-NEXT: - - - - - - 1.00 - movaps (%rbx), %xmm3
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456789
+
+# CHECK: [0,0] DeeeeeeER. movaps (%rax), %xmm0
+# CHECK-NEXT: [0,1] DeeeeeeER. movaps (%rcx), %xmm1
+# CHECK-NEXT: [0,2] D=eeeeeeER movaps (%rdx), %xmm2
+# CHECK-NEXT: [0,3] D=eeeeeeER movaps (%rbx), %xmm3
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movaps (%rax), %xmm0
+# CHECK-NEXT: 1. 1 1.0 1.0 0.0 movaps (%rcx), %xmm1
+# CHECK-NEXT: 2. 1 2.0 2.0 0.0 movaps (%rdx), %xmm2
+# CHECK-NEXT: 3. 1 2.0 2.0 0.0 movaps (%rbx), %xmm3
--- /dev/null
+# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
+# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -scheduler-stats -dispatch-stats -iterations=100 -timeline -timeline-max-iterations=1 -noalias=true < %s | FileCheck %s
+
+# LLVM-MCA-BEGIN
+movb %spl, (%rax)
+movb %bpl, (%rcx)
+movb %sil, (%rdx)
+movb %dil, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movw %sp, (%rax)
+movw %bp, (%rcx)
+movw %si, (%rdx)
+movw %di, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movl %esp, (%rax)
+movl %ebp, (%rcx)
+movl %esi, (%rdx)
+movl %edi, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movq %rsp, (%rax)
+movq %rbp, (%rcx)
+movq %rsi, (%rdx)
+movq %rdi, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movd %mm0, (%rax)
+movd %mm1, (%rcx)
+movd %mm2, (%rdx)
+movd %mm3, (%rbx)
+# LLVM-MCA-END
+
+# LLVM-MCA-BEGIN
+movaps %xmm0, (%rax)
+movaps %xmm1, (%rcx)
+movaps %xmm2, (%rdx)
+movaps %xmm3, (%rbx)
+# LLVM-MCA-END
+
+# CHECK: [0] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 403
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 0.99
+# CHECK-NEXT: IPC: 0.99
+# CHECK-NEXT: Block RThroughput: 4.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movb %spl, (%rax)
+# CHECK-NEXT: 1 1 1.00 * movb %bpl, (%rcx)
+# CHECK-NEXT: 1 1 1.00 * movb %sil, (%rdx)
+# CHECK-NEXT: 1 1 1.00 * movb %dil, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 329 (81.6%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 56 (13.9%)
+# CHECK-NEXT: 1, 329 (81.6%)
+# CHECK-NEXT: 3, 1 (0.2%)
+# CHECK-NEXT: 4, 17 (4.2%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (0.7%)
+# CHECK-NEXT: 1, 400 (99.3%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 49 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 4.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movb %spl, (%rax)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movb %bpl, (%rcx)
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movb %sil, (%rdx)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movb %dil, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456
+
+# CHECK: [0,0] DeER .. movb %spl, (%rax)
+# CHECK-NEXT: [0,1] D=eER.. movb %bpl, (%rcx)
+# CHECK-NEXT: [0,2] D==eER. movb %sil, (%rdx)
+# CHECK-NEXT: [0,3] D===eER movb %dil, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movb %spl, (%rax)
+# CHECK-NEXT: 1. 1 2.0 0.0 0.0 movb %bpl, (%rcx)
+# CHECK-NEXT: 2. 1 3.0 0.0 0.0 movb %sil, (%rdx)
+# CHECK-NEXT: 3. 1 4.0 0.0 0.0 movb %dil, (%rbx)
+
+# CHECK: [1] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 403
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 0.99
+# CHECK-NEXT: IPC: 0.99
+# CHECK-NEXT: Block RThroughput: 4.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movw %sp, (%rax)
+# CHECK-NEXT: 1 1 1.00 * movw %bp, (%rcx)
+# CHECK-NEXT: 1 1 1.00 * movw %si, (%rdx)
+# CHECK-NEXT: 1 1 1.00 * movw %di, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 329 (81.6%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 56 (13.9%)
+# CHECK-NEXT: 1, 329 (81.6%)
+# CHECK-NEXT: 3, 1 (0.2%)
+# CHECK-NEXT: 4, 17 (4.2%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (0.7%)
+# CHECK-NEXT: 1, 400 (99.3%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 49 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 4.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movw %sp, (%rax)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movw %bp, (%rcx)
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movw %si, (%rdx)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movw %di, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456
+
+# CHECK: [0,0] DeER .. movw %sp, (%rax)
+# CHECK-NEXT: [0,1] D=eER.. movw %bp, (%rcx)
+# CHECK-NEXT: [0,2] D==eER. movw %si, (%rdx)
+# CHECK-NEXT: [0,3] D===eER movw %di, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movw %sp, (%rax)
+# CHECK-NEXT: 1. 1 2.0 0.0 0.0 movw %bp, (%rcx)
+# CHECK-NEXT: 2. 1 3.0 0.0 0.0 movw %si, (%rdx)
+# CHECK-NEXT: 3. 1 4.0 0.0 0.0 movw %di, (%rbx)
+
+# CHECK: [2] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 403
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 0.99
+# CHECK-NEXT: IPC: 0.99
+# CHECK-NEXT: Block RThroughput: 4.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movl %esp, (%rax)
+# CHECK-NEXT: 1 1 1.00 * movl %ebp, (%rcx)
+# CHECK-NEXT: 1 1 1.00 * movl %esi, (%rdx)
+# CHECK-NEXT: 1 1 1.00 * movl %edi, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 329 (81.6%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 56 (13.9%)
+# CHECK-NEXT: 1, 329 (81.6%)
+# CHECK-NEXT: 3, 1 (0.2%)
+# CHECK-NEXT: 4, 17 (4.2%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (0.7%)
+# CHECK-NEXT: 1, 400 (99.3%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 49 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 4.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movl %esp, (%rax)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movl %ebp, (%rcx)
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movl %esi, (%rdx)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movl %edi, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456
+
+# CHECK: [0,0] DeER .. movl %esp, (%rax)
+# CHECK-NEXT: [0,1] D=eER.. movl %ebp, (%rcx)
+# CHECK-NEXT: [0,2] D==eER. movl %esi, (%rdx)
+# CHECK-NEXT: [0,3] D===eER movl %edi, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movl %esp, (%rax)
+# CHECK-NEXT: 1. 1 2.0 0.0 0.0 movl %ebp, (%rcx)
+# CHECK-NEXT: 2. 1 3.0 0.0 0.0 movl %esi, (%rdx)
+# CHECK-NEXT: 3. 1 4.0 0.0 0.0 movl %edi, (%rbx)
+
+# CHECK: [3] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 403
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 0.99
+# CHECK-NEXT: IPC: 0.99
+# CHECK-NEXT: Block RThroughput: 4.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movq %rsp, (%rax)
+# CHECK-NEXT: 1 1 1.00 * movq %rbp, (%rcx)
+# CHECK-NEXT: 1 1 1.00 * movq %rsi, (%rdx)
+# CHECK-NEXT: 1 1 1.00 * movq %rdi, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 329 (81.6%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 56 (13.9%)
+# CHECK-NEXT: 1, 329 (81.6%)
+# CHECK-NEXT: 3, 1 (0.2%)
+# CHECK-NEXT: 4, 17 (4.2%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (0.7%)
+# CHECK-NEXT: 1, 400 (99.3%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 49 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 4.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movq %rsp, (%rax)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movq %rbp, (%rcx)
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movq %rsi, (%rdx)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movq %rdi, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456
+
+# CHECK: [0,0] DeER .. movq %rsp, (%rax)
+# CHECK-NEXT: [0,1] D=eER.. movq %rbp, (%rcx)
+# CHECK-NEXT: [0,2] D==eER. movq %rsi, (%rdx)
+# CHECK-NEXT: [0,3] D===eER movq %rdi, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movq %rsp, (%rax)
+# CHECK-NEXT: 1. 1 2.0 0.0 0.0 movq %rbp, (%rcx)
+# CHECK-NEXT: 2. 1 3.0 0.0 0.0 movq %rsi, (%rdx)
+# CHECK-NEXT: 3. 1 4.0 0.0 0.0 movq %rdi, (%rbx)
+
+# CHECK: [4] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 403
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 0.99
+# CHECK-NEXT: IPC: 0.99
+# CHECK-NEXT: Block RThroughput: 4.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * U movd %mm0, (%rax)
+# CHECK-NEXT: 1 1 1.00 * U movd %mm1, (%rcx)
+# CHECK-NEXT: 1 1 1.00 * U movd %mm2, (%rdx)
+# CHECK-NEXT: 1 1 1.00 * U movd %mm3, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 329 (81.6%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 56 (13.9%)
+# CHECK-NEXT: 1, 329 (81.6%)
+# CHECK-NEXT: 3, 1 (0.2%)
+# CHECK-NEXT: 4, 17 (4.2%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (0.7%)
+# CHECK-NEXT: 1, 400 (99.3%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 49 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 4.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movd %mm0, (%rax)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movd %mm1, (%rcx)
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movd %mm2, (%rdx)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movd %mm3, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456
+
+# CHECK: [0,0] DeER .. movd %mm0, (%rax)
+# CHECK-NEXT: [0,1] D=eER.. movd %mm1, (%rcx)
+# CHECK-NEXT: [0,2] D==eER. movd %mm2, (%rdx)
+# CHECK-NEXT: [0,3] D===eER movd %mm3, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movd %mm0, (%rax)
+# CHECK-NEXT: 1. 1 2.0 0.0 0.0 movd %mm1, (%rcx)
+# CHECK-NEXT: 2. 1 3.0 0.0 0.0 movd %mm2, (%rdx)
+# CHECK-NEXT: 3. 1 4.0 0.0 0.0 movd %mm3, (%rbx)
+
+# CHECK: [5] Code Region
+
+# CHECK: Iterations: 100
+# CHECK-NEXT: Instructions: 400
+# CHECK-NEXT: Total Cycles: 403
+# CHECK-NEXT: Total uOps: 400
+
+# CHECK: Dispatch Width: 4
+# CHECK-NEXT: uOps Per Cycle: 0.99
+# CHECK-NEXT: IPC: 0.99
+# CHECK-NEXT: Block RThroughput: 4.0
+
+# CHECK: Instruction Info:
+# CHECK-NEXT: [1]: #uOps
+# CHECK-NEXT: [2]: Latency
+# CHECK-NEXT: [3]: RThroughput
+# CHECK-NEXT: [4]: MayLoad
+# CHECK-NEXT: [5]: MayStore
+# CHECK-NEXT: [6]: HasSideEffects (U)
+
+# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
+# CHECK-NEXT: 1 1 1.00 * movaps %xmm0, (%rax)
+# CHECK-NEXT: 1 1 1.00 * movaps %xmm1, (%rcx)
+# CHECK-NEXT: 1 1 1.00 * movaps %xmm2, (%rdx)
+# CHECK-NEXT: 1 1 1.00 * movaps %xmm3, (%rbx)
+
+# CHECK: Dynamic Dispatch Stall Cycles:
+# CHECK-NEXT: RAT - Register unavailable: 0
+# CHECK-NEXT: RCU - Retire tokens unavailable: 0
+# CHECK-NEXT: SCHEDQ - Scheduler full: 329 (81.6%)
+# CHECK-NEXT: LQ - Load queue full: 0
+# CHECK-NEXT: SQ - Store queue full: 0
+# CHECK-NEXT: GROUP - Static restrictions on the dispatch group: 0
+
+# CHECK: Dispatch Logic - number of cycles where we saw N micro opcodes dispatched:
+# CHECK-NEXT: [# dispatched], [# cycles]
+# CHECK-NEXT: 0, 56 (13.9%)
+# CHECK-NEXT: 1, 329 (81.6%)
+# CHECK-NEXT: 3, 1 (0.2%)
+# CHECK-NEXT: 4, 17 (4.2%)
+
+# CHECK: Schedulers - number of cycles where we saw N micro opcodes issued:
+# CHECK-NEXT: [# issued], [# cycles]
+# CHECK-NEXT: 0, 3 (0.7%)
+# CHECK-NEXT: 1, 400 (99.3%)
+
+# CHECK: Scheduler's queue usage:
+# CHECK-NEXT: [1] Resource name.
+# CHECK-NEXT: [2] Average number of used buffer entries.
+# CHECK-NEXT: [3] Maximum number of used buffer entries.
+# CHECK-NEXT: [4] Total number of buffer entries.
+
+# CHECK: [1] [2] [3] [4]
+# CHECK-NEXT: SBPortAny 49 54 54
+
+# CHECK: Resources:
+# CHECK-NEXT: [0] - SBDivider
+# CHECK-NEXT: [1] - SBFPDivider
+# CHECK-NEXT: [2] - SBPort0
+# CHECK-NEXT: [3] - SBPort1
+# CHECK-NEXT: [4] - SBPort4
+# CHECK-NEXT: [5] - SBPort5
+# CHECK-NEXT: [6.0] - SBPort23
+# CHECK-NEXT: [6.1] - SBPort23
+
+# CHECK: Resource pressure per iteration:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
+# CHECK-NEXT: - - - - 4.00 - 2.00 2.00
+
+# CHECK: Resource pressure by instruction:
+# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movaps %xmm0, (%rax)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movaps %xmm1, (%rcx)
+# CHECK-NEXT: - - - - 1.00 - - 1.00 movaps %xmm2, (%rdx)
+# CHECK-NEXT: - - - - 1.00 - 1.00 - movaps %xmm3, (%rbx)
+
+# CHECK: Timeline view:
+# CHECK-NEXT: Index 0123456
+
+# CHECK: [0,0] DeER .. movaps %xmm0, (%rax)
+# CHECK-NEXT: [0,1] D=eER.. movaps %xmm1, (%rcx)
+# CHECK-NEXT: [0,2] D==eER. movaps %xmm2, (%rdx)
+# CHECK-NEXT: [0,3] D===eER movaps %xmm3, (%rbx)
+
+# CHECK: Average Wait times (based on the timeline view):
+# CHECK-NEXT: [0]: Executions
+# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
+# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
+# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
+
+# CHECK: [0] [1] [2] [3]
+# CHECK-NEXT: 0. 1 1.0 1.0 0.0 movaps %xmm0, (%rax)
+# CHECK-NEXT: 1. 1 2.0 0.0 0.0 movaps %xmm1, (%rcx)
+# CHECK-NEXT: 2. 1 3.0 0.0 0.0 movaps %xmm2, (%rdx)
+# CHECK-NEXT: 3. 1 4.0 0.0 0.0 movaps %xmm3, (%rbx)
projects / llvm / commitdiff