+++ /dev/null
-%%% Copyright Ulf A. Lindgren
-%%% Department of Applied Electronics
-%%% Chalmers University of Technology
-%%% S-412 96 Gothenburg, Sweden
-%%% E-mail lindgren@ae.chalmers.se
-%%%
-%%% Note Permission is granted to modify this file under
-%%% the condition that it is saved using another
-%%% file and package name.
-%%%
-%%% Revision 1.1
-%%%
-%%% Jan. 8th Modified package name base date option
-%%% Jan. 22th Modified FmN and FmTi for error in book.cls
-%%% \MakeUppercase{#}->{\MakeUppercase#}
-%%% Apr. 6th Modified Lenny option to prevent undesired
-%%% skip of line.
-%%% Nov. 8th Fixed \@chapapp for AMS
-%%% Feb. 11th Fixed appendix problem related to Bjarne
-%%% Last modified Feb. 11th 1998
-
-\NeedsTeXFormat{LaTeX2e}[1995/12/01]
-\ProvidesPackage{fncychap}
- [1997/04/06 v1.11
- LaTeX package (Revised chapters)]
-
-%%%% DEFINITION OF Chapapp variables
-\newcommand{\CNV}{\huge\bfseries}
-\newcommand{\ChNameVar}[1]{\renewcommand{\CNV}{#1}}
-
-
-%%%% DEFINITION OF TheChapter variables
-\newcommand{\CNoV}{\huge\bfseries}
-\newcommand{\ChNumVar}[1]{\renewcommand{\CNoV}{#1}}
-
-\newif\ifUCN
-\UCNfalse
-\newif\ifLCN
-\LCNfalse
-\def\ChNameLowerCase{\LCNtrue\UCNfalse}
-\def\ChNameUpperCase{\UCNtrue\LCNfalse}
-\def\ChNameAsIs{\UCNfalse\LCNfalse}
-
-%%%%% Fix for AMSBook 971008
-
-\@ifundefined{@chapapp}{\let\@chapapp\chaptername}{}
-
-
-%%%%% Fix for Bjarne and appendix 980211
-
-\newif\ifinapp
-\inappfalse
-\renewcommand\appendix{\par
- \setcounter{chapter}{0}%
- \setcounter{section}{0}%
- \inapptrue%
- \renewcommand\@chapapp{\appendixname}%
- \renewcommand\thechapter{\@Alph\c@chapter}}
-
-%%%%%
-
-\newcommand{\FmN}[1]{%
-\ifUCN
- {\MakeUppercase#1}\LCNfalse
-\else
- \ifLCN
- {\MakeLowercase#1}\UCNfalse
- \else #1
- \fi
-\fi}
-
-
-%%%% DEFINITION OF Title variables
-\newcommand{\CTV}{\Huge\bfseries}
-\newcommand{\ChTitleVar}[1]{\renewcommand{\CTV}{#1}}
-
-%%%% DEFINITION OF the basic rule width
-\newlength{\RW}
-\setlength{\RW}{1pt}
-\newcommand{\ChRuleWidth}[1]{\setlength{\RW}{#1}}
-
-\newif\ifUCT
-\UCTfalse
-\newif\ifLCT
-\LCTfalse
-\def\ChTitleLowerCase{\LCTtrue\UCTfalse}
-\def\ChTitleUpperCase{\UCTtrue\LCTfalse}
-\def\ChTitleAsIs{\UCTfalse\LCTfalse}
-\newcommand{\FmTi}[1]{%
-\ifUCT
-
- {\MakeUppercase#1}\LCTfalse
-\else
- \ifLCT
- {\MakeLowercase#1}\UCTfalse
- \else #1
- \fi
-\fi}
-
-
-
-\newlength{\mylen}
-\newlength{\myhi}
-\newlength{\px}
-\newlength{\py}
-\newlength{\pyy}
-\newlength{\pxx}
-
-
-\def\mghrulefill#1{\leavevmode\leaders\hrule\@height #1\hfill\kern\z@}
-
-\newcommand{\DOCH}{%
- \CNV\FmN{\@chapapp}\space \CNoV\thechapter
- \par\nobreak
- \vskip 20\p@
- }
-\newcommand{\DOTI}[1]{%
- \CTV\FmTi{#1}\par\nobreak
- \vskip 40\p@
- }
-\newcommand{\DOTIS}[1]{%
- \CTV\FmTi{#1}\par\nobreak
- \vskip 40\p@
- }
-
-%%%%%% SONNY DEF
-
-\DeclareOption{Sonny}{%
- \ChNameVar{\Large\sf}
- \ChNumVar{\Huge}
- \ChTitleVar{\Large\sf}
- \ChRuleWidth{0.5pt}
- \ChNameUpperCase
- \renewcommand{\DOCH}{%
- \raggedleft
- \CNV\FmN{\@chapapp}\space \CNoV\thechapter
- \par\nobreak
- \vskip 40\p@}
- \renewcommand{\DOTI}[1]{%
- \CTV\raggedleft\mghrulefill{\RW}\par\nobreak
- \vskip 5\p@
- \CTV\FmTi{#1}\par\nobreak
- \mghrulefill{\RW}\par\nobreak
- \vskip 40\p@}
- \renewcommand{\DOTIS}[1]{%
- \CTV\raggedleft\mghrulefill{\RW}\par\nobreak
- \vskip 5\p@
- \CTV\FmTi{#1}\par\nobreak
- \mghrulefill{\RW}\par\nobreak
- \vskip 40\p@}
-}
-
-%%%%%% LENNY DEF
-
-\DeclareOption{Lenny}{%
-
- \ChNameVar{\fontsize{14}{16}\usefont{OT1}{phv}{m}{n}\selectfont}
- \ChNumVar{\fontsize{60}{62}\usefont{OT1}{ptm}{m}{n}\selectfont}
- \ChTitleVar{\Huge\bfseries\rm}
- \ChRuleWidth{1pt}
- \renewcommand{\DOCH}{%
- \settowidth{\px}{\CNV\FmN{\@chapapp}}
- \addtolength{\px}{2pt}
- \settoheight{\py}{\CNV\FmN{\@chapapp}}
- \addtolength{\py}{1pt}
-
- \settowidth{\mylen}{\CNV\FmN{\@chapapp}\space\CNoV\thechapter}
- \addtolength{\mylen}{1pt}
- \settowidth{\pxx}{\CNoV\thechapter}
- \addtolength{\pxx}{-1pt}
-
- \settoheight{\pyy}{\CNoV\thechapter}
- \addtolength{\pyy}{-2pt}
- \setlength{\myhi}{\pyy}
- \addtolength{\myhi}{-1\py}
- \par
- \parbox[b]{\textwidth}{%
- \rule[\py]{\RW}{\myhi}%
- \hskip -\RW%
- \rule[\pyy]{\px}{\RW}%
- \hskip -\px%
- \raggedright%
- \CNV\FmN{\@chapapp}\space\CNoV\thechapter%
- \hskip1pt%
- \mghrulefill{\RW}%
- \rule{\RW}{\pyy}\par\nobreak%
- \vskip -\baselineskip%
- \vskip -\pyy%
- \hskip \mylen%
- \mghrulefill{\RW}\par\nobreak%
- \vskip \pyy}%
- \vskip 20\p@}
-
-
- \renewcommand{\DOTI}[1]{%
- \raggedright
- \CTV\FmTi{#1}\par\nobreak
- \vskip 40\p@}
-
- \renewcommand{\DOTIS}[1]{%
- \raggedright
- \CTV\FmTi{#1}\par\nobreak
- \vskip 40\p@}
- }
-
-
-%%%%%%% GLENN DEF
-
-
-\DeclareOption{Glenn}{%
- \ChNameVar{\bfseries\Large\sf}
- \ChNumVar{\Huge}
- \ChTitleVar{\bfseries\Large\rm}
- \ChRuleWidth{1pt}
- \ChNameUpperCase
- \ChTitleUpperCase
- \renewcommand{\DOCH}{%
- \settoheight{\myhi}{\CTV\FmTi{Test}}
- \setlength{\py}{\baselineskip}
- \addtolength{\py}{\RW}
- \addtolength{\py}{\myhi}
- \setlength{\pyy}{\py}
- \addtolength{\pyy}{-1\RW}
-
- \raggedright
- \CNV\FmN{\@chapapp}\space\CNoV\thechapter
- \hskip 3pt\mghrulefill{\RW}\rule[-1\pyy]{2\RW}{\py}\par\nobreak}
-
- \renewcommand{\DOTI}[1]{%
- \addtolength{\pyy}{-4pt}
- \settoheight{\myhi}{\CTV\FmTi{#1}}
- \addtolength{\myhi}{\py}
- \addtolength{\myhi}{-1\RW}
- \vskip -1\pyy
- \rule{2\RW}{\myhi}\mghrulefill{\RW}\hskip 2pt
- \raggedleft\CTV\FmTi{#1}\par\nobreak
- \vskip 80\p@}
-
- \renewcommand{\DOTIS}[1]{%
- \setlength{\py}{10pt}
- \setlength{\pyy}{\py}
- \addtolength{\pyy}{\RW}
- \setlength{\myhi}{\baselineskip}
- \addtolength{\myhi}{\pyy}
- \mghrulefill{\RW}\rule[-1\py]{2\RW}{\pyy}\par\nobreak
-% \addtolength{}{}
-\vskip -1\baselineskip
- \rule{2\RW}{\myhi}\mghrulefill{\RW}\hskip 2pt
- \raggedleft\CTV\FmTi{#1}\par\nobreak
- \vskip 60\p@}
- }
-
-%%%%%%% CONNY DEF
-
-\DeclareOption{Conny}{%
- \ChNameUpperCase
- \ChTitleUpperCase
- \ChNameVar{\centering\Huge\rm\bfseries}
- \ChNumVar{\Huge}
- \ChTitleVar{\centering\Huge\rm}
- \ChRuleWidth{2pt}
-
- \renewcommand{\DOCH}{%
- \mghrulefill{3\RW}\par\nobreak
- \vskip -0.5\baselineskip
- \mghrulefill{\RW}\par\nobreak
- \CNV\FmN{\@chapapp}\space \CNoV\thechapter
- \par\nobreak
- \vskip -0.5\baselineskip
- }
- \renewcommand{\DOTI}[1]{%
- \mghrulefill{\RW}\par\nobreak
- \CTV\FmTi{#1}\par\nobreak
- \vskip 60\p@
- }
- \renewcommand{\DOTIS}[1]{%
- \mghrulefill{\RW}\par\nobreak
- \CTV\FmTi{#1}\par\nobreak
- \vskip 60\p@
- }
- }
-
-%%%%%%% REJNE DEF
-
-\DeclareOption{Rejne}{%
-
- \ChNameUpperCase
- \ChTitleUpperCase
- \ChNameVar{\centering\Large\rm}
- \ChNumVar{\Huge}
- \ChTitleVar{\centering\Huge\rm}
- \ChRuleWidth{1pt}
- \renewcommand{\DOCH}{%
- \settoheight{\py}{\CNoV\thechapter}
- \addtolength{\py}{-1pt}
- \CNV\FmN{\@chapapp}\par\nobreak
- \vskip 20\p@
- \setlength{\myhi}{2\baselineskip}
- \setlength{\px}{\myhi}
- \addtolength{\px}{-1\RW}
- \rule[-1\px]{\RW}{\myhi}\mghrulefill{\RW}\hskip
- 10pt\raisebox{-0.5\py}{\CNoV\thechapter}\hskip
-10pt\mghrulefill{\RW}\rule[-1\px]{\RW}{\myhi}\par\nobreak
- \vskip -1\p@
- }
- \renewcommand{\DOTI}[1]{%
- \setlength{\mylen}{\textwidth}
- \addtolength{\mylen}{-2\RW}
- {\vrule width\RW}\parbox{\mylen}{\CTV\FmTi{#1}}{\vrule
-width\RW}\par\nobreak
- \vskip
--1pt\rule{\RW}{2\baselineskip}\mghrulefill{\RW}\rule{\RW}{2\baselineskip}
- \vskip 60\p@
- }
- \renewcommand{\DOTIS}[1]{%
- \setlength{\py}{\fboxrule}
- \setlength{\fboxrule}{\RW}
- \setlength{\mylen}{\textwidth}
- \addtolength{\mylen}{-2\RW}
- \fbox{\parbox{\mylen}{\vskip
-2\baselineskip\CTV\FmTi{#1}\par\nobreak\vskip \baselineskip}}
- \setlength{\fboxrule}{\py}
- \vskip 60\p@
- }
- }
-
-
-%%%%%%% BJARNE DEF
-
-\DeclareOption{Bjarne}{%
- \ChNameUpperCase
- \ChTitleUpperCase
- \ChNameVar{\raggedleft\normalsize\rm}
- \ChNumVar{\raggedleft \bfseries\Large}
- \ChTitleVar{\raggedleft \Large\rm}
- \ChRuleWidth{1pt}
-
-
-%% Note thechapter -> c@chapter fix appendix bug
-
- \newcounter{AlphaCnt}
- \newcounter{AlphaDecCnt}
- \newcommand{\AlphaNo}{%
- \ifcase\number\theAlphaCnt
- \ifnum\c@chapter=0
- ZERO\else{}\fi
- \or ONE\or TWO\or THREE\or FOUR\or FIVE
- \or SIX\or SEVEN\or EIGHT\or NINE\or TEN
- \or ELEVEN\or TWELV\or THIRTEEN\or FOURTEEN\or FIFTEEN
- \or SIXTEEN\or SEVENTEEN\or EIGHTEEN\or NINETEEN\fi
-}
-
- \newcommand{\AlphaDecNo}{%
- \setcounter{AlphaDecCnt}{0}
- \@whilenum\number\theAlphaCnt>0\do
- {\addtocounter{AlphaCnt}{-10}
- \addtocounter{AlphaDecCnt}{1}}
- \ifnum\number\theAlphaCnt=0
- \else
- \addtocounter{AlphaDecCnt}{-1}
- \addtocounter{AlphaCnt}{10}
- \fi
-
-
- \ifcase\number\theAlphaDecCnt\or TEN\or TWENTY\or THIRTY\or
- FORTY\or FIFTY\or SIXTY\or SEVENTY\or EIGHTY\or NINETY\fi
- }
- \newcommand{\TheAlphaChapter}{%
-
- \ifinapp
- \thechapter
- \else
- \setcounter{AlphaCnt}{\c@chapter}
- \ifnum\c@chapter<20
- \AlphaNo
- \else
- \AlphaDecNo\AlphaNo
- \fi
- \fi
- }
- \renewcommand{\DOCH}{%
- \mghrulefill{\RW}\par\nobreak
- \CNV\FmN{\@chapapp}\par\nobreak
- \CNoV\TheAlphaChapter\par\nobreak
- \vskip -1\baselineskip\vskip 5pt\mghrulefill{\RW}\par\nobreak
- \vskip 20\p@
- }
- \renewcommand{\DOTI}[1]{%
- \CTV\FmTi{#1}\par\nobreak
- \vskip 40\p@
- }
- \renewcommand{\DOTIS}[1]{%
- \CTV\FmTi{#1}\par\nobreak
- \vskip 40\p@
- }
-}
-
-\DeclareOption*{%
- \PackageWarning{fancychapter}{unknown style option}
- }
-
-\ProcessOptions* \relax
-
-\def\@makechapterhead#1{%
- \vspace*{50\p@}%
- {\parindent \z@ \raggedright \normalfont
- \ifnum \c@secnumdepth >\m@ne
- \DOCH
- \fi
- \interlinepenalty\@M
- \DOTI{#1}
- }}
-\def\@schapter#1{\if@twocolumn
- \@topnewpage[\@makeschapterhead{#1}]%
- \else
- \@makeschapterhead{#1}%
- \@afterheading
- \fi}
-\def\@makeschapterhead#1{%
- \vspace*{50\p@}%
- {\parindent \z@ \raggedright
- \normalfont
- \interlinepenalty\@M
- \DOTIS{#1}
- \vskip 40\p@
- }}
-
-\endinput
-
-
+++ /dev/null
-%
-% myformat.sty for the Python docummentation [works only with with Latex2e]
-%
-
-\NeedsTeXFormat{LaTeX2e}[1995/12/01]
-\ProvidesPackage{python}
- [1998/01/11 LaTeX package (Python manual markup)]
-
-% The "fncychap" package is used to get the nice chapter headers. The
-% .sty file is distributed with Python, so you should not need to disable
-% it. You'd also end up with a mixed page style; uglier than stock LaTeX!
-%
-\RequirePackage[Bjarne]{fncychap}\typeout{Using fancy chapter headings.}
-
-% for PDF output, use maximal compression
-\@ifundefined{pdfannotlink}{
- \let\LinkColor=\relax
- \let\NormalColor=\relax
-}{%
- \input{pdfcolor}
- \let\LinkColor=\NavyBlue
- \let\NormalColor=\Black
- \pdfcompresslevel=9
- %
- % This definition allows the entries in the page-view of the ToC to be
- % active links. Some work, some don't.
- %
- \let\OldContentsline=\contentsline
- \renewcommand{\contentsline}[3]{%
- \OldContentsline{#1}{%
- \pdfannotlink attr{/Border [0 0 0]} goto name{page.#3}%
- \LinkColor#2\NormalColor%
- \pdfendlink%
- }{#3}%
- }
- \renewcommand{\thepage}{\roman{page}}
- %
- % This is supposed to build the "outline" view of the document; it seems
- % quite fragile. The breakages are the same as in the ToC.
- %
- \AtEndDocument{
- \InputIfFileExists{\jobname.bkm}{\pdfcatalog pagemode{/UseOutlines}}{}
- }
- \let\OldLabel=\label
- \renewcommand{\label}[1]{%
- \OldLabel{#1}%
- {\pdfdest name{label.#1} fit}%
- }
- % This stuff adds a page.# destination to every PDF page, where # has
- % the same formatting as the displayed page number. This doesn't really
- % help with the frontmatter, but does fine with the body.
- %
- % This is *heavily* based on the hyperref package.
- %
- \def\@begindvi{%
- \unvbox \@begindvibox
- \@hyperfixhead
- }
- \def\hyperpageanchor{\pdfdest name{page.\thepage}}
- \let\HYPERPAGEANCHOR\hyperpageanchor
- \def\@hyperfixhead{%
- \let\H@old@thehead\@thehead
- \gdef\@foo{\pdfdest name{page.\thepage} fit}%
- \expandafter\ifx\expandafter\@empty\H@old@thehead
- \def\H@old@thehead{\hfil}\fi
- \def\@thehead{\@foo\relax\H@old@thehead}%
- }
-}
-
-% Increase printable page size (copied from fullpage.sty)
-\topmargin 0pt
-\advance \topmargin by -\headheight
-\advance \topmargin by -\headsep
-
-% attempt to work a little better for A4 users
-\@ifundefined{paperheight}{
- \textheight 9in
-}{
- \textheight \paperheight
- \advance\textheight by -2in
-}
-
-\oddsidemargin 0pt
-\evensidemargin \oddsidemargin
-\marginparwidth 0.5in
-
-\@ifundefined{paperwidth}{
- \textwidth 6.5in
-}{
- \textwidth \paperwidth
- \advance\textwidth by -2in
-}
-
-
-% Style parameters and macros used by most documents here
-\raggedbottom
-\sloppy
-\parindent = 0mm
-\parskip = 2mm
-\hbadness = 5000 % don't print trivial gripes
-
-\pagestyle{empty} % start this way; change for
-\pagenumbering{roman} % ToC & chapters
-\setcounter{secnumdepth}{1}
-
-% Use this to set the font family for headers and other decor:
-\newcommand{\HeaderFamily}{\sffamily}
-
-% Redefine the 'normal' header/footer style when using "fancyhdr" package:
-\@ifundefined{fancyhf}{}{
- % Use \pagestyle{normal} as the primary pagestyle for text.
- \fancypagestyle{normal}{
- \fancyhf{}
- \fancyfoot[LE,RO]{{\HeaderFamily\thepage}}
- \fancyfoot[LO]{{\HeaderFamily\nouppercase{\rightmark}}}
- \fancyfoot[RE]{{\HeaderFamily\nouppercase{\leftmark}}}
- \renewcommand{\headrulewidth}{0pt}
- \renewcommand{\footrulewidth}{0.4pt}
- }
- % Update the plain style so we get the page number & footer line,
- % but not a chapter or section title. This is to keep the first
- % page of a chapter and the blank page between chapters `clean.'
- \fancypagestyle{plain}{
- \fancyhf{}
- \fancyfoot[LE,RO]{{\HeaderFamily\thepage}}
- \renewcommand{\headrulewidth}{0pt}
- \renewcommand{\footrulewidth}{0.4pt}
- }
- % Redefine \cleardoublepage so that the blank page between chapters
- % gets the plain style and not the fancy style. This is described
- % in the documentation for the fancyhdr package by Piet von Oostrum.
- \@ifundefined{chapter}{}{
- \renewcommand{\cleardoublepage}{
- \clearpage\if@openright \ifodd\c@page\else
- \hbox{}
- \thispagestyle{plain}
- \newpage
- \if@twocolumn\hbox{}\newpage\fi\fi\fi
- }
- }
-}
-
-% old code font selections:
-\let\codefont=\tt
-\let\sectcodefont=\tt
-
-% (Haven't found a new one that gets <, >, and _ right without being
-% monospaced.)
-
-
-% This sets up the {verbatim} environment to be indented and a minipage,
-% and to have all the other mostly nice properties that we want for
-% code samples.
-
-% Variable used by begin code command
-\newlength{\codewidth}
-
-\newcommand{\examplevspace}{2mm}
-\newcommand{\exampleindent}{1cm}
-
-\let\OldVerbatim=\verbatim
-\let\OldEndVerbatim=\endverbatim
-\renewcommand{\verbatim}{%
- \begingroup%
- \setlength{\parindent}\exampleindent%
- % Calculate the text width for the minipage:
- \setlength{\codewidth}{\linewidth}%
- \addtolength{\codewidth}{-\parindent}%
- %
- \par%
- \vspace\examplevspace%
- \indent%
- \begin{minipage}[t]{\codewidth}%
- \small%
- \OldVerbatim%
-}
-\renewcommand{\endverbatim}{%
- \OldEndVerbatim%
- \end{minipage}%
- \endgroup%
-}
-
-% Augment the sectioning commands used to get our own font family in place:
-\renewcommand{\section}{\@startsection {section}{1}{\z@}%
- {-3.5ex \@plus -1ex \@minus -.2ex}%
- {2.3ex \@plus.2ex}%
- {\reset@font\Large\HeaderFamily}}
-\renewcommand{\subsection}{\@startsection{subsection}{2}{\z@}%
- {-3.25ex\@plus -1ex \@minus -.2ex}%
- {1.5ex \@plus .2ex}%
- {\reset@font\large\HeaderFamily}}
-\renewcommand{\subsubsection}{\@startsection{subsubsection}{3}{\z@}%
- {-3.25ex\@plus -1ex \@minus -.2ex}%
- {1.5ex \@plus .2ex}%
- {\reset@font\normalsize\HeaderFamily}}
-\renewcommand{\paragraph}{\@startsection{paragraph}{4}{\z@}%
- {3.25ex \@plus1ex \@minus.2ex}%
- {-1em}%
- {\reset@font\normalsize\HeaderFamily}}
-\renewcommand{\subparagraph}{\@startsection{subparagraph}{5}{\parindent}%
- {3.25ex \@plus1ex \@minus .2ex}%
- {-1em}%
- {\reset@font\normalsize\HeaderFamily}}
-
-
-% Underscore hack (only act like subscript operator if in math mode)
-%
-% The following is due to Mark Wooding (the old version didn't work with
-% Latex 2e.
-
-\DeclareRobustCommand\hackscore{%
- \ifmmode_\else\textunderscore\fi%
-}
-\begingroup
-\catcode`\_\active
-\def\next{%
- \AtBeginDocument{\catcode`\_\active\def_{\hackscore{}}}%
-}
-\expandafter\endgroup\next
-
-%
-% This is the old hack, which didn't work with 2e.
-% You should not need this since the rest of the documentation is now
-% LaTeX2e-only.
-%
-%\def\_{\ifnum\fam=\ttfamily \char'137\else{\tt\char'137}\fi}
-%\catcode`\_=12
-%\catcode`\_=\active\def_{\ifnum\fam=\ttfamily \char'137 \else{\tt\char'137}\fi}
-
-
-
-%% Lots of index-entry generation support.
-
-% Command to wrap around stuff that refers to function / module /
-% attribute names in the index. Default behavior: like \code{}. To
-% just keep the index entries in the roman font, uncomment the second
-% definition to use instead; it matches O'Reilly style more.
-%
-\newcommand{\idxcode}[1]{\codefont{#1}}
-%\renewcommand{\idxcode}[1]{#1}
-
-% Command to generate two index entries (using subentries)
-\newcommand{\indexii}[2]{\index{#1!#2}\index{#2!#1}}
-
-% And three entries (using only one level of subentries)
-\newcommand{\indexiii}[3]{\index{#1!#2 #3}\index{#2!#3, #1}\index{#3!#1 #2}}
-
-% And four (again, using only one level of subentries)
-\newcommand{\indexiv}[4]{
-\index{#1!#2 #3 #4}
-\index{#2!#3 #4, #1}
-\index{#3!#4, #1 #2}
-\index{#4!#1 #2 #3}
-}
-
-% Command to generate a reference to a function, statement, keyword,
-% operator.
-\newcommand{\stindex}[1]{\indexii{statement}{#1@{\idxcode{#1}}}}
-\newcommand{\opindex}[1]{\indexii{operator}{#1@{\idxcode{#1}}}}
-\newcommand{\exindex}[1]{\indexii{exception}{#1@{\idxcode{#1}}}}
-\newcommand{\obindex}[1]{\indexii{object}{#1}}
-\newcommand{\bifuncindex}[1]{\index{#1@{\idxcode{#1()}} (built-in function)}}
-
-% Add an index entry for a module
-\newcommand{\refmodule}[2]{\index{#1@{\idxcode{#1}} (#2module)}}
-\newcommand{\refmodindex}[1]{\refmodule{#1}{}}
-\newcommand{\refbimodindex}[1]{\refmodule{#1}{built-in }}
-\newcommand{\refexmodindex}[1]{\refmodule{#1}{extension }}
-\newcommand{\refstmodindex}[1]{\refmodule{#1}{standard }}
-
-% support for the module index
-\if@usemoduleindex
- \newwrite\modindexfile
- \openout\modindexfile=mod\jobname.idx
-\fi
-
-% Add the defining entry for a module
-\newcommand{\defmodindex}[2]{%
- \index{#1@{\idxcode{#1}} (#2module)|textbf}%
- \setindexsubitem{(in module #1)}%
- \if@usemoduleindex%
- \write\modindexfile{#1 \thepage}%
- \fi}
-
-% built-in & Python modules in the main distribution
-\newcommand{\bimodindex}[1]{\defmodindex{#1}{built-in }}
-\newcommand{\stmodindex}[1]{\defmodindex{#1}{standard }}
-
-% Python & extension modules outside the main distribution
-\newcommand{\modindex}[1]{\defmodindex{#1}{}}
-\newcommand{\exmodindex}[1]{\defmodindex{#1}{extension }}
-
-% Additional string for an index entry
-\newcommand{\index@subitem}{}
-\newcommand{\setindexsubitem}[1]{\renewcommand{\index@subitem}{#1}}
-\newcommand{\ttindex}[1]{\index{#1@{\idxcode{#1}} \index@subitem}}
-
-
-% {fulllineitems} is used in one place in libregex.tex, but is really for
-% internal use in this file.
-%
-\newenvironment{fulllineitems}{
- \begin{list}{}{\labelwidth \leftmargin \labelsep 0pt
- \rightmargin 0pt \topsep -\parskip \partopsep \parskip
- \itemsep -\parsep
- \let\makelabel=\itemnewline}
-}{\end{list}}
-
-
-% cfuncdesc should be called as
-% \begin{cfuncdesc}{type}{name}{arglist}
-% ... description ...
-% \end{cfuncdesc}
-\newenvironment{cfuncdesc}[3]{%
- \begin{fulllineitems}%
- \item[\code{#1 \bfcode{#2}(\varvars{#3})}]%
- \index{#2@{\idxcode{#2()}}}%
-}{\end{fulllineitems}}
-
-\newenvironment{cvardesc}[2]{%
- \begin{fulllineitems}%
- \item[\code{#1 \bfcode{#2}}]%
- \index{#2@{\idxcode{#2}}}%
-}{\end{fulllineitems}}
-
-\newenvironment{ctypedesc}[1]{%
- \begin{fulllineitems}%
- \item[\bfcode{#1}]\ttindex{#1}
-}{\end{fulllineitems}}
-
-\newcommand{\funcline}[2]{\funclineni{#1}{#2}\ttindex{#1()}}
-\newenvironment{funcdesc}[2]{%
- \begin{fulllineitems}%
- \funcline{#1}{#2}%
-}{\end{fulllineitems}}
-
-\newcommand{\optional}[1]{%
- {\textnormal{\Large[}}{#1}\hspace{0.5mm}{\textnormal{\Large]}}}
-
-% similar to {funcdesc}, but doesn't add to the index
-\newcommand{\funclineni}[2]{\item[\code{\bfcode{#1}(\varvars{#2})}]}
-\newenvironment{funcdescni}[2]{%
- \begin{fulllineitems}%
- \funclineni{#1}{#2}%
-}{\end{fulllineitems}}
-
-\newenvironment{classdesc}[2]{%
- \begin{fulllineitems}%
- \item[\code{\bfcode{#1}(\varvars{#2})}]%
- \ttindex{#1}%
- \def\baseclasses##1{}%
-}{\end{fulllineitems}}
-
-\newenvironment{excdesc}[1]{%
- \begin{fulllineitems}%
- \item[\bfcode{#1}]\ttindex{#1}%
-}{\end{fulllineitems}}
-
-\newcommand{\dataline}[1]{\datalineni{#1}\ttindex{#1}}
-\newenvironment{datadesc}[1]{%
- \begin{fulllineitems}%
- \dataline{#1}%
-}{\end{fulllineitems}}
-
-% similar to {datadesc}, but doesn't add to the index
-\newcommand{\datalineni}[1]{\item[\bfcode{#1}]}
-\newenvironment{datadescni}[1]{%
- \begin{fulllineitems}%
- \datalineni{#1}%
-}{\end{fulllineitems}}
-
-\newenvironment{opcodedesc}[2]{%
- \begin{fulllineitems}%
- \item[\bfcode{#1}\quad\var{#2}]%
-}{\end{fulllineitems}}
-
-
-\let\nodename=\label
-
-% For these commands, use \command{} to get the typography right, not
-% {\command}. This works better with the texinfo translation.
-\newcommand{\ABC}{{\sc abc}}
-\newcommand{\UNIX}{{\sc Unix}}
-\newcommand{\POSIX}{POSIX}
-\newcommand{\ASCII}{{\sc ascii}}
-\newcommand{\Cpp}{C\protect\raisebox{.18ex}{++}}
-\newcommand{\C}{C}
-\newcommand{\EOF}{{\sc eof}}
-\newcommand{\NULL}{\code{NULL}}
-
-% code is the most difficult one...
-\newcommand{\code}[1]{{\@vobeyspaces\@noligs\def\{{\char`\{}\def\}{\char`\}}\def\~{\char`\~}\def\^{\char`\^}\def\e{\char`\\}\def\${\char`\$}\def\#{\char`\#}\def\&{\char`\&}\def\%{\char`\%}%
-\mbox{\codefont{#1}}}}
-
-\newcommand{\bfcode}[1]{\code{\bfseries#1}} % bold-faced code font
-\newcommand{\kbd}[1]{\mbox{\tt #1}}
-\newcommand{\key}[1]{\mbox{\tt #1}}
-\newcommand{\samp}[1]{\mbox{`\code{#1}'}}
-% This weird definition of \var{} allows it to always appear in roman
-% italics, and won't get funky in code fragments when we play around
-% with fonts.
-\newcommand{\var}[1]{\mbox{\normalsize\textrm{\textit{#1\/}}}}
-\renewcommand{\emph}[1]{{\em #1\/}}
-\newcommand{\dfn}[1]{\emph{#1}}
-\newcommand{\strong}[1]{{\bf #1}}
-% let's experiment with a new font:
-\newcommand{\file}[1]{\mbox{`\small\textsf{#1}'}}
-
-% Use this def/redef approach for \url{} since hyperref defined this already,
-% but only if we actually used hyperref:
-\@ifundefined{pdfannotlink}{%
- \newcommand{\pythonurl}[1]{\mbox{\small\textsf{#1}}}%
-}{
- \newcommand{\pythonurl}[1]{{%
- \pdfannotlink attr{/Border [0 0 0]} user{/S /URI /URI (#1)}%
- \LinkColor% color of the link text
- \mbox{\small\textsf{#1}}%
- \NormalColor% Turn it back off; these are declarative
- \pdfendlink}% and don't appear bound to the current
- }% formatting "box".
-}
-\let\url=\pythonurl
-\newcommand{\email}[1]{\mbox{\small\textsf{#1}}}
-
-\newcommand{\varvars}[1]{{\def\,{\/{\char`\,}}\var{#1}}}
-
-\newif\iftexi\texifalse
-\newif\iflatex\latextrue
-
-% These should be used for all references to identifiers which are
-% used to refer to instances of specific language constructs. See the
-% names for specific semantic assignments.
-%
-% For now, don't do anything really fancy with them; just use them as
-% logical markup. This might change in the future.
-%
-\let\module=\code
-\let\keyword=\code
-\let\exception=\code
-\let\class=\code
-\let\function=\code
-\let\member=\code
-\let\method=\code
-
-\let\cfunction=\code
-\let\ctype=\code
-\let\cdata=\code
-
-% constants defined in Python modules or C headers, not language constants:
-\let\constant=\code
-
-\newcommand{\manpage}[2]{{\emph{#1}(#2)}}
-\newcommand{\rfc}[1]{RFC #1\index{RFC!RFC #1}}
-\newcommand{\program}[1]{\strong{#1}}
-
-
-% Deprecation stuff.
-% Should be extended to allow an index / list of deprecated stuff. But
-% there's a lot of stuff that needs to be done to make that automatable.
-%
-% First parameter is the release number that deprecates the feature, the
-% second is the action the should be taken by users of the feature.
-%
-% Example:
-%
-% \deprecated {1.5.1}
-% {Use \method{frobnicate()} instead.}
-%
-\newcommand{\deprecated}[2]{%
- \strong{Deprecated since release #1.} #2\par}
-
-
-\newenvironment{tableii}[4]{%
- \begin{center}%
- \def\lineii##1##2{\csname#2\endcsname{##1}&##2\\}%
- \begin{tabular}{#1}\hline \strong{#3}&\strong{#4} \\ \hline%
-}{%
- \hline%
- \end{tabular}%
- \end{center}%
-}
-
-\newenvironment{tableiii}[5]{%
- \begin{center}%
- \def\lineiii##1##2##3{\csname#2\endcsname{##1}&##2&##3\\}%
- \begin{tabular}{#1}\hline \strong{#3}&\strong{#4}&\strong{#5} \\ \hline%
-}{%
- \hline%
- \end{tabular}%
- \end{center}%
-}
-
-\newcommand{\itemnewline}[1]{%
- \@tempdima\linewidth%
- \advance\@tempdima \leftmargin\makebox[\@tempdima][l]{#1}%
-}
-
-\newcommand{\sectcode}[1]{{\sectcodefont{#1}}}
-
-% Cross-referencing (AMK)
-% Sample usage:
-% \begin{seealso}
-% \seemodule{rand}{Uniform random number generator}; % Module xref
-% \seetext{\emph{Encyclopedia Britannica}}. % Ref to a book
-%
-% % A funky case: module name contains '_'; have to supply an optional key
-% \seemodule[copyreg]{copy_reg}{pickle interface constructor registration}
-%
-% \end{seealso}
-
-\newif\if@keyedmodule\@keyedmodulefalse
-\newcommand{\@modulebadkey}{{--just-some-junk--}}
-
-\@ifundefined{pdfannotlink}{%
- \newcommand{\seemodule}[3][\@modulebadkey]{%
- \ifx\@modulebadkey#1\def\@modulekey{#2}\else\def\@modulekey{#1}\fi%
- \ref{module-\@modulekey}:\quad %
- Module \module{#2}%
- \quad (#3)%
- }
-}{\newcommand{\seemodule}[3][\@modulebadkey]{%
- \ifx\@modulebadkey#1\def\@modulekey{#2}\else\def\@modulekey{#1}\fi%
- \ref{module-\@modulekey}:\quad %
- {\pdfannotlink attr{/Border [0 0 0]} goto name{label.module-\@modulekey}%
- \LinkColor Module \module{#2} \NormalColor%
- \pdfendlink%
- }%
- \quad (#3)%
- }
-}
-\newenvironment{seealso}[0]{
- \strong{See Also:}\par
- % These should only be defined within the {seealso} environment:
- %\def\see@module##1##2{\ref{module-##1}:\quad Module \module{##1}\quad (##2)}
-% \def\@seemodule[##1]##2##3{%
-% \ref{module-##2}:\quad %
-% \@ifundefined{pdfannotlink}{%
-% Module \module{##2}%
-% }{\if@keyedmodule\@keyedmodulefalse\fi%
-% {\pdfannotlink attr{/Border [0 0 0]} goto name{module.##1}%
-% \LinkColor Module \module{##2}\NormalColor\pdfendlink}%
-% }%
-% \quad (##3)%
-% }
-% \def\seemodule{%
-% \@ifnextchar [\@seemodule{\@keyedmoduletrue \@seemodule[]}%
-% }
- \def\seetext##1{\par{##1}}
-}{\par}
-
-
-% Fix the theindex environment to add an entry to the Table of
-% Contents; this is much nicer than just having to jump to the end of
-% the book and flip around, especially with multiple indexes.
-%
-\let\OldTheindex=\theindex
-\renewcommand{\theindex}{
- \cleardoublepage
- \OldTheindex
- \addcontentsline{toc}{chapter}{\indexname}
-}
-
-% Allow the release number to be specified independently of the
-% \date{}. This allows the date to reflect the document's date and
-% release to specify the Python release that is documented.
-%
-\newcommand{\@release}{}
-\newcommand{\version}{}
-\newcommand{\releasename}{Release}
-\newcommand{\release}[1]{%
- \renewcommand{\@release}{\releasename\space\version}%
- \renewcommand{\version}{#1}}
-
-% Allow specification of the author's address separately from the
-% author's name. This can be used to format them differently, which
-% is a good thing.
-%
-\newcommand{\@authoraddress}{}
-\newcommand{\authoraddress}[1]{\renewcommand{\@authoraddress}{#1}}
-
-% This sets up the fancy chapter headings that make the documents look
-% at least a little better than the usual LaTeX output.
-%
-\@ifundefined{ChTitleVar}{}{
- \ChNameVar{\raggedleft\normalsize\HeaderFamily}
- \ChNumVar{\raggedleft \bfseries\Large\HeaderFamily}
- \ChTitleVar{\raggedleft \rm\Huge\HeaderFamily}
- % This creates chapter heads without the leading \vspace*{}:
- \def\@makechapterhead#1{%
- {\parindent \z@ \raggedright \normalfont
- \ifnum \c@secnumdepth >\m@ne
- \DOCH
- \fi
- \interlinepenalty\@M
- \DOTI{#1}
- }
- }
-}
-
-% Tell TeX about pathological hyphenation cases:
-\hyphenation{Base-HTTP-Re-quest-Hand-ler}
projects / python / commitdiff