* Use autoconf/automake/libtool (kukuk)
* pam_securetty: Be fail-close on user lookups, always log failures,
not just with "debug" (Solar Designer)
+* Add gettext support
+* Add translations for cs, hu, nb, pa and pt
0.80: Wed Jul 13 13:23:20 CEST 2005
* pam_tally: test for NULL data before dereferencing them (t8m)
AUTOMAKE_OPTIONS = 1.8 gnu dist-bzip2
-SUBDIRS = libpam libpamc libpam_misc modules conf doc examples
+SUBDIRS = libpam libpamc libpam_misc modules po conf doc examples
CLEANFILES = *~
-EXTRA_DIST = pgp.keys.asc CHANGELOG Copyright
+EXTRA_DIST = config.rpath mkinstalldirs pgp.keys.asc CHANGELOG Copyright
+
+ACLOCAL_AMFLAGS = -I m4
make install
-That said, please report problems to me.
+That said, please report problems to the bug reporting database
+on sourceforge.net.
Andrew Morgan
<morgan@kernel.org>
/* lots of stuff gets written to /var/run/pam-debug.log */
#undef DEBUG
+/* Define to 1 if translation of program messages to the user's native
+ language is requested. */
+#undef ENABLE_NLS
+
/* Define to the type of elements in the array set by `getgroups'. Usually
this is either `int' or `gid_t'. */
#undef GETGROUPS_T
+/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
+ CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYCURRENT
+
+/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
+ the CoreFoundation framework. */
+#undef HAVE_CFPREFERENCESCOPYAPPVALUE
+
/* Define to 1 if you have the <crypt.h> header file. */
#undef HAVE_CRYPT_H
/* Define to 1 if you have the <db.h> header file. */
#undef HAVE_DB_H
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+ */
+#undef HAVE_DCGETTEXT
+
/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
*/
#undef HAVE_DIRENT_H
/* Define to 1 if you have the `getspnam_r' function. */
#undef HAVE_GETSPNAM_R
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
/* Define to 1 if you have the `gettimeofday' function. */
#undef HAVE_GETTIMEOFDAY
+/* Define if you have the iconv() function. */
+#undef HAVE_ICONV
+
/* Define to 1 if you have the <inittypes.h> header file. */
#undef HAVE_INITTYPES_H
`char[]'. */
#undef YYTEXT_POINTER
-#ifdef ENABLE_NLS
-#include <libintl.h>
-#define _(msgid) dgettext("Linux-PAM", msgid)
-#define N_(msgid) msgid
-#else
-#define _(msgid) (msgid)
-#define N_(msgid) msgid
-#endif /* ENABLE_NLS */
-
/* Number of bits in a file offset, on hosts where this is settable. */
#undef _FILE_OFFSET_BITS
architecture can be found. */
#undef _PAM_ISA
+#ifdef ENABLE_NLS
+#include <libintl.h>
+#define _(msgid) dgettext("Linux-PAM", msgid)
+#define N_(msgid) msgid
+#else
+#define _(msgid) (msgid)
+#define N_(msgid) msgid
+#endif /* ENABLE_NLS */
+
/* Define to empty if `const' does not conform to ANSI C. */
#undef const
--- /dev/null
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2005 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+cc_basename=`echo "$CC" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ darwin*)
+ case "$cc_basename" in
+ xlc*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ mingw* | pw32* | os2*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux*)
+ case $cc_basename in
+ icc* | ecc*)
+ wl='-Wl,'
+ ;;
+ pgcc | pgf77 | pgf90)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we cannot use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = yes; then
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if test "$GCC" = yes ; then
+ :
+ else
+ case "$cc_basename" in
+ xlc*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | kfreebsd*-gnu | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10* | hpux11*)
+ if test "$with_gnu_ld" = no; then
+ case "$host_cpu" in
+ hppa*64*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=no
+ ;;
+ ia64*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=no
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4.2uw2*)
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ ;;
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+ ;;
+ sysv5*)
+ hardcode_libdir_flag_spec=
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ ;;
+ aix4* | aix5*)
+ ;;
+ amigaos*)
+ ;;
+ beos*)
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ shrext=.dll
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ ;;
+ dgux*)
+ ;;
+ freebsd1*)
+ ;;
+ kfreebsd*-gnu)
+ ;;
+ freebsd*)
+ ;;
+ gnu*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case "$host_cpu" in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux*)
+ ;;
+ knetbsd*-gnu)
+ ;;
+ netbsd*)
+ ;;
+ newsos6)
+ ;;
+ nto-qnx*)
+ ;;
+ openbsd*)
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ ;;
+ osf3* | osf4* | osf5*)
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ ;;
+ sunos4*)
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ ;;
+ sysv4*MP*)
+ ;;
+ uts4*)
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE YACC LEX LEXLIB LEX_OUTPUT_ROOT LN_S EGREP ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL HAVE_VERSIONING_TRUE HAVE_VERSIONING_FALSE LIBPRELUDE_CONFIG LIBPRELUDE_CFLAGS LIBPRELUDE_PTHREAD_CFLAGS LIBPRELUDE_LDFLAGS LIBPRELUDE_LIBS LIBPRELUDE_PREFIX LIBPRELUDE_CONFIG_PREFIX WITH_DEBUG SECUREDIR SCONFIGDIR DOCDIR WITH_PAMLOCKING PAM_READ_BOTH_CONFS LIBDL LIBCRACK HAVE_LIBCRACK_TRUE HAVE_LIBCRACK_FALSE LIBCRYPT LIBDB HAVE_LIBDB_TRUE HAVE_LIBDB_FALSE LIBNSL LIBSELINUX HAVE_LIBSELINUX_TRUE HAVE_LIBSELINUX_FALSE LIBPWDB HAVE_LIBPWDB_TRUE HAVE_LIBPWDB_FALSE HAVE_NDBM_H LIBOBJS SGML2PS SGML2TXT SGML2HTML SGML2LATEX PS2PDF HAVE_SGML2PS_TRUE HAVE_SGML2PS_FALSE HAVE_SGML2TXT_TRUE HAVE_SGML2TXT_FALSE HAVE_SGML2HTML_TRUE HAVE_SGML2HTML_FALSE HAVE_PS2PDF_TRUE HAVE_PS2PDF_FALSE PSER LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE YACC LEX LEXLIB LEX_OUTPUT_ROOT LN_S EGREP ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL HAVE_VERSIONING_TRUE HAVE_VERSIONING_FALSE LIBPRELUDE_CONFIG LIBPRELUDE_CFLAGS LIBPRELUDE_PTHREAD_CFLAGS LIBPRELUDE_LDFLAGS LIBPRELUDE_LIBS LIBPRELUDE_PREFIX LIBPRELUDE_CONFIG_PREFIX WITH_DEBUG SECUREDIR SCONFIGDIR DOCDIR WITH_PAMLOCKING PAM_READ_BOTH_CONFS LIBDL LIBCRACK HAVE_LIBCRACK_TRUE HAVE_LIBCRACK_FALSE LIBCRYPT LIBDB HAVE_LIBDB_TRUE HAVE_LIBDB_FALSE LIBNSL LIBSELINUX HAVE_LIBSELINUX_TRUE HAVE_LIBSELINUX_FALSE LIBPWDB HAVE_LIBPWDB_TRUE HAVE_LIBPWDB_FALSE HAVE_NDBM_H LIBOBJS SGML2PS SGML2TXT SGML2HTML SGML2LATEX PS2PDF HAVE_SGML2PS_TRUE HAVE_SGML2PS_FALSE HAVE_SGML2TXT_TRUE HAVE_SGML2TXT_FALSE HAVE_SGML2HTML_TRUE HAVE_SGML2HTML_FALSE HAVE_PS2PDF_TRUE HAVE_PS2PDF_FALSE PSER MKINSTALLDIRS USE_NLS MSGFMT GMSGFMT XGETTEXT MSGMERGE INTL_MACOSX_LIBS LIBICONV LTLIBICONV INTLLIBS LIBINTL LTLIBINTL POSUB LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
--enable-pamlocking configure libpam to observe a global authentication lock
--enable-read-both-confs read both /etc/pam.d and /etc/pam.conf files
--disable-lckpwdf do not use the lckpwdf function
+ --disable-nls do not use Native Language Support
+ --disable-rpath do not hardcode runtime library paths
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--with-libprelude-prefix=PFX Prefix where libprelude is installed (optional)
--with-mailspool path to mail spool directory
default _PATH_MAILDIR if defined in paths.h, otherwise /var/spool/mail
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
+ --without-libintl-prefix don't search for libintl in includedir and libdir
Some influential environment variables:
CC C compiler command
# Define the identity of the package.
PACKAGE="Linux-PAM"
- VERSION=0.99.0.2
+ VERSION=0.99.0.3
cat >>confdefs.h <<_ACEOF
+ALL_LINGUAS="cs hu nb pa pt"
+
test "${prefix}" = "NONE" && prefix="/usr"
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 4127 "configure"' > conftest.$ac_ext
+ echo '#line 4136 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
# Provide some information about the compiler.
-echo "$as_me:5706:" \
+echo "$as_me:5715:" \
"checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:6804: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:6813: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:6808: \$? = $ac_status" >&5
+ echo "$as_me:6817: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7066: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7075: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7070: \$? = $ac_status" >&5
+ echo "$as_me:7079: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7128: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7137: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:7132: \$? = $ac_status" >&5
+ echo "$as_me:7141: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 9368 "configure"
+#line 9377 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 9466 "configure"
+#line 9475 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:11714: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:11723: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:11718: \$? = $ac_status" >&5
+ echo "$as_me:11727: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:11776: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:11785: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:11780: \$? = $ac_status" >&5
+ echo "$as_me:11789: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 13145 "configure"
+#line 13154 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 13243 "configure"
+#line 13252 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14128: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14137: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:14132: \$? = $ac_status" >&5
+ echo "$as_me:14141: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14190: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14199: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:14194: \$? = $ac_status" >&5
+ echo "$as_me:14203: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16312: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16321: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16316: \$? = $ac_status" >&5
+ echo "$as_me:16325: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16574: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16583: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16578: \$? = $ac_status" >&5
+ echo "$as_me:16587: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16636: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16645: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:16640: \$? = $ac_status" >&5
+ echo "$as_me:16649: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 18876 "configure"
+#line 18885 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 18974 "configure"
+#line 18983 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
- ac_config_files="$ac_config_files Makefile libpam/Makefile libpamc/Makefile libpamc/test/Makefile libpam_misc/Makefile conf/Makefile conf/pam_conv1/Makefile modules/Makefile modules/pammodutil/Makefile modules/pam_access/Makefile modules/pam_cracklib/Makefile modules/pam_debug/Makefile modules/pam_deny/Makefile modules/pam_env/Makefile modules/pam_filter/Makefile modules/pam_filter/upperLOWER/Makefile modules/pam_ftp/Makefile modules/pam_group/Makefile modules/pam_issue/Makefile modules/pam_lastlog/Makefile modules/pam_limits/Makefile modules/pam_listfile/Makefile modules/pam_localuser/Makefile modules/pam_mail/Makefile modules/pam_mkhomedir/Makefile modules/pam_motd/Makefile modules/pam_nologin/Makefile modules/pam_permit/Makefile modules/pam_pwdb/Makefile modules/pam_radius/Makefile modules/pam_rhosts/Makefile modules/pam_rootok/Makefile modules/pam_securetty/Makefile modules/pam_selinux/Makefile modules/pam_shells/Makefile modules/pam_stress/Makefile modules/pam_succeed_if/Makefile modules/pam_tally/Makefile modules/pam_time/Makefile modules/pam_umask/Makefile modules/pam_unix/Makefile modules/pam_userdb/Makefile modules/pam_warn/Makefile modules/pam_wheel/Makefile modules/pam_xauth/Makefile doc/Makefile examples/Makefile"
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ case "$ac_aux_dir" in
+ /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;;
+ *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;;
+ esac
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
-_ACEOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-{
- (set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n \
- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
- ;;
- esac;
-} |
- sed '
- t clear
- : clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
- if test -w $cache_file; then
- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
- cat confcache >$cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+ echo "$as_me:$LINENO: checking whether NLS is requested" >&5
+echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi;
+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
+echo "${ECHO_T}$USE_NLS" >&6
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ ]*$//;
-}'
-fi
-DEFS=-DHAVE_CONFIG_H
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_i=`echo "$ac_i" |
- sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
- # 2. Add them.
- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-LTLIBOBJS=$ac_ltlibobjs
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-if test -z "${HAVE_VERSIONING_TRUE}" && test -z "${HAVE_VERSIONING_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_VERSIONING\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_VERSIONING\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
fi
-if test -z "${HAVE_LIBCRACK_TRUE}" && test -z "${HAVE_LIBCRACK_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBCRACK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_LIBCRACK\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_MSGFMT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$MSGFMT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+ ;;
+esac
fi
-if test -z "${HAVE_LIBDB_TRUE}" && test -z "${HAVE_LIBDB_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBDB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_LIBDB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+ echo "$as_me:$LINENO: result: $MSGFMT" >&5
+echo "${ECHO_T}$MSGFMT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-if test -z "${HAVE_LIBSELINUX_TRUE}" && test -z "${HAVE_LIBSELINUX_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBSELINUX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_LIBSELINUX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_GMSGFMT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $GMSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
fi
-if test -z "${HAVE_LIBPWDB_TRUE}" && test -z "${HAVE_LIBPWDB_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBPWDB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_LIBPWDB\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+GMSGFMT=$ac_cv_path_GMSGFMT
+
+if test -n "$GMSGFMT"; then
+ echo "$as_me:$LINENO: result: $GMSGFMT" >&5
+echo "${ECHO_T}$GMSGFMT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
fi
-if test -z "${HAVE_SGML2PS_TRUE}" && test -z "${HAVE_SGML2PS_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_SGML2PS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_SGML2PS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
fi
-if test -z "${HAVE_SGML2TXT_TRUE}" && test -z "${HAVE_SGML2TXT_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_SGML2TXT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_SGML2TXT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
fi
-if test -z "${HAVE_SGML2HTML_TRUE}" && test -z "${HAVE_SGML2HTML_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_SGML2HTML\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_SGML2HTML\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_XGETTEXT+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$XGETTEXT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
fi
-if test -z "${HAVE_PS2PDF_TRUE}" && test -z "${HAVE_PS2PDF_FALSE}"; then
- { { echo "$as_me:$LINENO: error: conditional \"HAVE_PS2PDF\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-echo "$as_me: error: conditional \"HAVE_PS2PDF\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
- { (exit 1); exit 1; }; }
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+ echo "$as_me:$LINENO: result: $XGETTEXT" >&5
+echo "${ECHO_T}$XGETTEXT" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ rm -f messages.po
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_path_MSGMERGE+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case "$MSGMERGE" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+ ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+ ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+ echo "$as_me:$LINENO: result: $MSGMERGE" >&5
+echo "${ECHO_T}$MSGMERGE" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+
+ if test "$GMSGFMT" != ":"; then
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+ echo "$as_me:$LINENO: result: found $GMSGFMT program is not GNU msgfmt; ignore it" >&5
+echo "${ECHO_T}found $GMSGFMT program is not GNU msgfmt; ignore it" >&6
+ GMSGFMT=":"
+ fi
+ fi
+
+ if test "$XGETTEXT" != ":"; then
+ if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
+ (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5
+echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6
+ XGETTEXT=":"
+ fi
+ rm -f messages.po
+ fi
+
+ ac_config_commands="$ac_config_commands default-1"
+
+
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi;
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo "$as_me:$LINENO: checking for ld used by GCC" >&5
+echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${acl_cv_path_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${acl_cv_prog_gnu_ld+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+ echo "$as_me:$LINENO: checking for shared library run path origin" >&5
+echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6
+if test "${acl_cv_rpath+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5
+echo "${ECHO_T}$acl_cv_rpath" >&6
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath or --disable-rpath was given.
+if test "${enable_rpath+set}" = set; then
+ enableval="$enable_rpath"
+ :
+else
+ enable_rpath=yes
+fi;
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix or --without-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then
+ withval="$with_libiconv_prefix"
+
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi;
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking for CFPreferencesCopyAppValue" >&5
+echo $ECHO_N "checking for CFPreferencesCopyAppValue... $ECHO_C" >&6
+if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -framework CoreFoundation"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+echo "${ECHO_T}$gt_cv_func_CFPreferencesCopyAppValue" >&6
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_CFPREFERENCESCOPYAPPVALUE 1
+_ACEOF
+
+ fi
+ echo "$as_me:$LINENO: checking for CFLocaleCopyCurrent" >&5
+echo $ECHO_N "checking for CFLocaleCopyCurrent... $ECHO_C" >&6
+if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -framework CoreFoundation"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_CFLocaleCopyCurrent=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+echo "${ECHO_T}$gt_cv_func_CFLocaleCopyCurrent" >&6
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_CFLOCALECOPYCURRENT 1
+_ACEOF
+
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+
+
+
+
+ echo "$as_me:$LINENO: checking whether NLS is requested" >&5
+echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6
+ # Check whether --enable-nls or --disable-nls was given.
+if test "${enable_nls+set}" = set; then
+ enableval="$enable_nls"
+ USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi;
+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
+echo "${ECHO_T}$USE_NLS" >&6
+
+
+
+
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+
+
+
+
+
+
+ echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5
+echo $ECHO_N "checking for GNU gettext in libc... $ECHO_C" >&6
+if test "${gt_cv_func_gnugettext1_libc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+int
+main ()
+{
+bindtextdomain ("", "");
+return (gettext ("") != 0) + _nl_msg_cat_cntr + *_nl_domain_bindings
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_gnugettext1_libc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_gnugettext1_libc=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libc" >&5
+echo "${ECHO_T}$gt_cv_func_gnugettext1_libc" >&6
+
+ if test "$gt_cv_func_gnugettext1_libc" != "yes"; then
+
+
+
+
+
+ am_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ echo "$as_me:$LINENO: checking for iconv" >&5
+echo $ECHO_N "checking for iconv... $ECHO_C" >&6
+if test "${am_cv_func_iconv+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_func_iconv=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5
+echo "${ECHO_T}$am_cv_func_iconv" >&6
+ if test "$am_cv_func_iconv" = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_ICONV 1
+_ACEOF
+
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ echo "$as_me:$LINENO: checking how to link with libiconv" >&5
+echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $LIBICONV" >&5
+echo "${ECHO_T}$LIBICONV" >&6
+ else
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix or --without-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then
+ withval="$with_libintl_prefix"
+
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+
+fi;
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='intl '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$hardcode_direct" = yes; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+ done
+ fi
+
+ echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5
+echo $ECHO_N "checking for GNU gettext in libintl... $ECHO_C" >&6
+if test "${gt_cv_func_gnugettext1_libintl+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return (gettext ("") != 0) + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ gt_cv_func_gnugettext1_libintl=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+gt_cv_func_gnugettext1_libintl=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$gt_cv_func_gnugettext1_libintl" != yes && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <libintl.h>
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return (gettext ("") != 0) + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ gt_cv_func_gnugettext1_libintl=yes
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libintl" >&5
+echo "${ECHO_T}$gt_cv_func_gnugettext1_libintl" >&6
+ fi
+
+ if test "$gt_cv_func_gnugettext1_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext1_libintl" = "yes" \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+cat >>confdefs.h <<\_ACEOF
+#define ENABLE_NLS 1
+_ACEOF
+
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ echo "$as_me:$LINENO: checking whether to use NLS" >&5
+echo $ECHO_N "checking whether to use NLS... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $USE_NLS" >&5
+echo "${ECHO_T}$USE_NLS" >&6
+ if test "$USE_NLS" = "yes"; then
+ echo "$as_me:$LINENO: checking where the gettext function comes from" >&5
+echo $ECHO_N "checking where the gettext function comes from... $ECHO_C" >&6
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ echo "$as_me:$LINENO: result: $gt_source" >&5
+echo "${ECHO_T}$gt_source" >&6
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then
+ echo "$as_me:$LINENO: checking how to link with libintl" >&5
+echo $ECHO_N "checking how to link with libintl... $ECHO_C" >&6
+ echo "$as_me:$LINENO: result: $LIBINTL" >&5
+echo "${ECHO_T}$LIBINTL" >&6
+
+ for element in $INCINTL; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ fi
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_GETTEXT 1
+_ACEOF
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_DCGETTEXT 1
+_ACEOF
+
+ fi
+
+ POSUB=po
+ fi
+
+
+
+ INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+
+
+
+ ac_config_files="$ac_config_files Makefile libpam/Makefile libpamc/Makefile libpamc/test/Makefile libpam_misc/Makefile conf/Makefile conf/pam_conv1/Makefile po/Makefile.in modules/Makefile modules/pammodutil/Makefile modules/pam_access/Makefile modules/pam_cracklib/Makefile modules/pam_debug/Makefile modules/pam_deny/Makefile modules/pam_env/Makefile modules/pam_filter/Makefile modules/pam_filter/upperLOWER/Makefile modules/pam_ftp/Makefile modules/pam_group/Makefile modules/pam_issue/Makefile modules/pam_lastlog/Makefile modules/pam_limits/Makefile modules/pam_listfile/Makefile modules/pam_localuser/Makefile modules/pam_mail/Makefile modules/pam_mkhomedir/Makefile modules/pam_motd/Makefile modules/pam_nologin/Makefile modules/pam_permit/Makefile modules/pam_pwdb/Makefile modules/pam_radius/Makefile modules/pam_rhosts/Makefile modules/pam_rootok/Makefile modules/pam_securetty/Makefile modules/pam_selinux/Makefile modules/pam_shells/Makefile modules/pam_stress/Makefile modules/pam_succeed_if/Makefile modules/pam_tally/Makefile modules/pam_time/Makefile modules/pam_umask/Makefile modules/pam_unix/Makefile modules/pam_userdb/Makefile modules/pam_warn/Makefile modules/pam_wheel/Makefile modules/pam_xauth/Makefile doc/Makefile examples/Makefile"
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_VERSIONING_TRUE}" && test -z "${HAVE_VERSIONING_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_VERSIONING\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_VERSIONING\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_LIBCRACK_TRUE}" && test -z "${HAVE_LIBCRACK_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBCRACK\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_LIBCRACK\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_LIBDB_TRUE}" && test -z "${HAVE_LIBDB_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBDB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_LIBDB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_LIBSELINUX_TRUE}" && test -z "${HAVE_LIBSELINUX_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBSELINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_LIBSELINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_LIBPWDB_TRUE}" && test -z "${HAVE_LIBPWDB_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_LIBPWDB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_LIBPWDB\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_SGML2PS_TRUE}" && test -z "${HAVE_SGML2PS_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_SGML2PS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_SGML2PS\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_SGML2TXT_TRUE}" && test -z "${HAVE_SGML2TXT_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_SGML2TXT\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_SGML2TXT\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_SGML2HTML_TRUE}" && test -z "${HAVE_SGML2HTML_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_SGML2HTML\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_SGML2HTML\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${HAVE_PS2PDF_TRUE}" && test -z "${HAVE_PS2PDF_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"HAVE_PS2PDF\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"HAVE_PS2PDF\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
fi
: ${CONFIG_STATUS=./config.status}
#
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+
_ACEOF
"libpam_misc/Makefile" ) CONFIG_FILES="$CONFIG_FILES libpam_misc/Makefile" ;;
"conf/Makefile" ) CONFIG_FILES="$CONFIG_FILES conf/Makefile" ;;
"conf/pam_conv1/Makefile" ) CONFIG_FILES="$CONFIG_FILES conf/pam_conv1/Makefile" ;;
+ "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
"modules/Makefile" ) CONFIG_FILES="$CONFIG_FILES modules/Makefile" ;;
"modules/pammodutil/Makefile" ) CONFIG_FILES="$CONFIG_FILES modules/pammodutil/Makefile" ;;
"modules/pam_access/Makefile" ) CONFIG_FILES="$CONFIG_FILES modules/pam_access/Makefile" ;;
"doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"examples/Makefile" ) CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;;
"depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
s,@HAVE_PS2PDF_TRUE@,$HAVE_PS2PDF_TRUE,;t t
s,@HAVE_PS2PDF_FALSE@,$HAVE_PS2PDF_FALSE,;t t
s,@PSER@,$PSER,;t t
+s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t
+s,@USE_NLS@,$USE_NLS,;t t
+s,@MSGFMT@,$MSGFMT,;t t
+s,@GMSGFMT@,$GMSGFMT,;t t
+s,@XGETTEXT@,$XGETTEXT,;t t
+s,@MSGMERGE@,$MSGMERGE,;t t
+s,@INTL_MACOSX_LIBS@,$INTL_MACOSX_LIBS,;t t
+s,@LIBICONV@,$LIBICONV,;t t
+s,@LTLIBICONV@,$LTLIBICONV,;t t
+s,@INTLLIBS@,$INTLLIBS,;t t
+s,@LIBINTL@,$LIBINTL,;t t
+s,@LTLIBINTL@,$LTLIBINTL,;t t
+s,@POSUB@,$POSUB,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t
CEOF
done
done
;;
+ default-1 )
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done ;;
esac
done
_ACEOF
dnl Process this file with autoconf to produce a configure script.
AC_INIT(conf/pam_conv1/pam_conv.y)
-AM_INIT_AUTOMAKE("Linux-PAM", 0.99.0.2)
+AM_INIT_AUTOMAKE("Linux-PAM", 0.99.0.3)
AM_CONFIG_HEADER(config.h)
AC_CANONICAL_HOST
AC_SUBST(PACKAGE)
AC_SUBST(VERSION)
+ALL_LINGUAS="cs hu nb pa pt"
+
dnl
dnl By default, everything under PAM is installed below /usr.
dnl
fi
AC_SUBST(PSER)
-AH_VERBATIM([_ENABLE_NLS],
+AM_GNU_GETTEXT_VERSION
+AM_GNU_GETTEXT([external])
+
+AH_VERBATIM([_ZZENABLE_NLS],
[#ifdef ENABLE_NLS
#include <libintl.h>
#define _(msgid) dgettext("Linux-PAM", msgid)
dnl Files to be created from when we run configure
AC_OUTPUT(Makefile libpam/Makefile libpamc/Makefile libpamc/test/Makefile \
libpam_misc/Makefile conf/Makefile conf/pam_conv1/Makefile \
+ po/Makefile.in \
modules/Makefile modules/pammodutil/Makefile \
modules/pam_access/Makefile modules/pam_cracklib/Makefile \
modules/pam_debug/Makefile modules/pam_deny/Makefile \
tar zvfc Linux-PAM-$(VERSION)-docs.tar.gz \
--exclude CVS --exclude .cvsignore --exclude '.#*' \
html ps txts pdf specs/draft-morgan-pam-current.txt
-
+ tar jvfc Linux-PAM-$(VERSION)-docs.tar.bz2 \
+ --exclude CVS --exclude .cvsignore --exclude '.#*' \
+ html ps txts pdf specs/draft-morgan-pam-current.txt
--- /dev/null
+# codeset.m4 serial AM1 (gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+ [AC_TRY_LINK([#include <langinfo.h>],
+ [char* cs = nl_langinfo(CODESET);],
+ am_cv_langinfo_codeset=yes,
+ am_cv_langinfo_codeset=no)
+ ])
+ if test $am_cv_langinfo_codeset = yes; then
+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+ [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+ fi
+])
--- /dev/null
+# gettext.m4 serial 36 (gettext-0.14.3)
+dnl Copyright (C) 1995-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define([gt_included_intl], ifelse([$1], [external], [no], [yes]))
+ define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
+ gt_INTL_MACOSX
+
+ dnl Set USE_NLS.
+ AM_NLS
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ dnl Add a version number to the cache macros.
+ define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1)))
+ define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc])
+ define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl])
+
+ AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
+ [AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+ [bindtextdomain ("", "");
+return (gettext ("") != 0)]ifelse([$2], [need-ngettext], [ + (ngettext ("", "", 0) != 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings],
+ gt_cv_func_gnugettext_libc=yes,
+ gt_cv_func_gnugettext_libc=no)])
+
+ if test "$gt_cv_func_gnugettext_libc" != "yes"; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ gt_cv_func_gnugettext_libintl,
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return (gettext ("") != 0)]ifelse([$2], [need-ngettext], [ + (ngettext ("", "", 0) != 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ gt_cv_func_gnugettext_libintl=yes,
+ gt_cv_func_gnugettext_libintl=no)
+ dnl Now see whether libintl exists and depends on libiconv.
+ if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <libintl.h>
+]ifelse([$2], [need-formatstring-macros],
+[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+], [])[extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return (gettext ("") != 0)]ifelse([$2], [need-ngettext], [ + (ngettext ("", "", 0) != 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ gt_cv_func_gnugettext_libintl=yes
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if test "$gt_cv_func_gnugettext_libc" = "yes" \
+ || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ CATOBJEXT=
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Some extra flags are needed during linking.
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ AC_MSG_CHECKING([whether to use NLS])
+ AC_MSG_RESULT([$USE_NLS])
+ if test "$USE_NLS" = "yes"; then
+ AC_MSG_CHECKING([where the gettext function comes from])
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ AC_MSG_RESULT([$gt_source])
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE(HAVE_DCGETTEXT, 1,
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATOBJEXT)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST(INSTOBJEXT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST(GENCAT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLOBJS=
+ if test "$USE_INCLUDED_LIBINTL" = yes; then
+ INTLOBJS="\$(GETTOBJS)"
+ fi
+ AC_SUBST(INTLOBJS)
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST(INTLLIBS)
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST(LIBINTL)
+ AC_SUBST(LTLIBINTL)
+ AC_SUBST(POSUB)
+])
+
+
+dnl Checks for all prerequisites of the intl subdirectory,
+dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS,
+dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL.
+AC_DEFUN([AM_INTL_SUBDIR],
+[
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([gt_GLIBC2])dnl
+ AC_REQUIRE([AC_PROG_RANLIB])dnl
+ AC_REQUIRE([AC_ISC_POSIX])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+ AC_REQUIRE([AC_C_CONST])dnl
+ AC_REQUIRE([bh_C_SIGNED])dnl
+ AC_REQUIRE([AC_C_INLINE])dnl
+ AC_REQUIRE([AC_TYPE_OFF_T])dnl
+ AC_REQUIRE([AC_TYPE_SIZE_T])dnl
+ AC_REQUIRE([gl_AC_TYPE_LONG_LONG])dnl
+ AC_REQUIRE([gt_TYPE_LONGDOUBLE])dnl
+ AC_REQUIRE([gt_TYPE_WCHAR_T])dnl
+ AC_REQUIRE([gt_TYPE_WINT_T])dnl
+ AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+ AC_REQUIRE([gt_TYPE_INTMAX_T])
+ AC_REQUIRE([gt_PRINTF_POSIX])
+ AC_REQUIRE([AC_FUNC_ALLOCA])dnl
+ AC_REQUIRE([AC_FUNC_MMAP])dnl
+ AC_REQUIRE([gl_GLIBC21])dnl
+ AC_REQUIRE([gt_INTDIV0])dnl
+ AC_REQUIRE([gl_AC_TYPE_UINTMAX_T])dnl
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl
+ AC_REQUIRE([gt_INTTYPES_PRI])dnl
+ AC_REQUIRE([gl_XSIZE])dnl
+ AC_REQUIRE([gt_INTL_MACOSX])dnl
+
+ AC_CHECK_TYPE([ptrdiff_t], ,
+ [AC_DEFINE([ptrdiff_t], [long],
+ [Define as the type of the result of subtracting two pointers, if the system doesn't define it.])
+ ])
+ AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
+stdlib.h string.h unistd.h sys/param.h])
+ AC_CHECK_FUNCS([asprintf fwprintf getcwd getegid geteuid getgid getuid \
+mempcpy munmap putenv setenv setlocale snprintf stpcpy strcasecmp strdup \
+strtoul tsearch wcslen __argz_count __argz_stringify __argz_next \
+__fsetlocking])
+
+ dnl Use the _snprintf function only if it is declared (because on NetBSD it
+ dnl is defined as a weak alias of snprintf; we prefer to use the latter).
+ gt_CHECK_DECL(_snprintf, [#include <stdio.h>])
+ gt_CHECK_DECL(_snwprintf, [#include <stdio.h>])
+
+ dnl Use the *_unlocked functions only if they are declared.
+ dnl (because some of them were defined without being declared in Solaris
+ dnl 2.5.1 but were removed in Solaris 2.6, whereas we want binaries built
+ dnl on Solaris 2.5.1 to run on Solaris 2.6).
+ dnl Don't use AC_CHECK_DECLS because it isn't supported in autoconf-2.13.
+ gt_CHECK_DECL(feof_unlocked, [#include <stdio.h>])
+ gt_CHECK_DECL(fgets_unlocked, [#include <stdio.h>])
+ gt_CHECK_DECL(getc_unlocked, [#include <stdio.h>])
+
+ case $gt_cv_func_printf_posix in
+ *yes) HAVE_POSIX_PRINTF=1 ;;
+ *) HAVE_POSIX_PRINTF=0 ;;
+ esac
+ AC_SUBST([HAVE_POSIX_PRINTF])
+ if test "$ac_cv_func_asprintf" = yes; then
+ HAVE_ASPRINTF=1
+ else
+ HAVE_ASPRINTF=0
+ fi
+ AC_SUBST([HAVE_ASPRINTF])
+ if test "$ac_cv_func_snprintf" = yes; then
+ HAVE_SNPRINTF=1
+ else
+ HAVE_SNPRINTF=0
+ fi
+ AC_SUBST([HAVE_SNPRINTF])
+ if test "$ac_cv_func_wprintf" = yes; then
+ HAVE_WPRINTF=1
+ else
+ HAVE_WPRINTF=0
+ fi
+ AC_SUBST([HAVE_WPRINTF])
+
+ AM_ICONV
+ AM_LANGINFO_CODESET
+ if test $ac_cv_header_locale_h = yes; then
+ gt_LC_MESSAGES
+ fi
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers"
+ fi
+
+ dnl intl/plural.c is generated from intl/plural.y. It requires bison,
+ dnl because plural.y uses bison specific features. It requires at least
+ dnl bison-1.26 because earlier versions generate a plural.c that doesn't
+ dnl compile.
+ dnl bison is only needed for the maintainer (who touches plural.y). But in
+ dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
+ dnl the rule in general Makefile. Now, some people carelessly touch the
+ dnl files or have a broken "make" program, hence the plural.c rule will
+ dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
+ dnl present or too old.
+ AC_CHECK_PROGS([INTLBISON], [bison])
+ if test -z "$INTLBISON"; then
+ ac_verc_fail=yes
+ else
+ dnl Found it, now check the version.
+ AC_MSG_CHECKING([version of bison])
+changequote(<<,>>)dnl
+ ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
+ case $ac_prog_version in
+ '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
+ 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
+changequote([,])dnl
+ ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
+ *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
+ esac
+ AC_MSG_RESULT([$ac_prog_version])
+ fi
+ if test $ac_verc_fail = yes; then
+ INTLBISON=:
+ fi
+])
+
+
+dnl Checks for special options needed on MacOS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+ dnl Check for API introduced in MacOS X 10.2.
+ AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+ gt_cv_func_CFPreferencesCopyAppValue,
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -framework CoreFoundation"
+ AC_TRY_LINK([#include <CFPreferences.h>],
+ [CFPreferencesCopyAppValue(NULL, NULL)],
+ [gt_cv_func_CFPreferencesCopyAppValue=yes],
+ [gt_cv_func_CFPreferencesCopyAppValue=no])
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+ AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], 1,
+ [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+ fi
+ dnl Check for API introduced in MacOS X 10.3.
+ AC_CACHE_CHECK([for CFLocaleCopyCurrent], gt_cv_func_CFLocaleCopyCurrent,
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -I/System/Library/Frameworks/CoreFoundation.framework/Headers"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -framework CoreFoundation"
+ AC_TRY_LINK([#include <CFLocale.h>], [CFLocaleCopyCurrent();],
+ [gt_cv_func_CFLocaleCopyCurrent=yes],
+ [gt_cv_func_CFLocaleCopyCurrent=no])
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], 1,
+ [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+ AC_SUBST([INTL_MACOSX_LIBS])
+])
+
+
+dnl gt_CHECK_DECL(FUNC, INCLUDES)
+dnl Check whether a function is declared.
+AC_DEFUN([gt_CHECK_DECL],
+[
+ AC_CACHE_CHECK([whether $1 is declared], ac_cv_have_decl_$1,
+ [AC_TRY_COMPILE([$2], [
+#ifndef $1
+ char *p = (char *) $1;
+#endif
+], ac_cv_have_decl_$1=yes, ac_cv_have_decl_$1=no)])
+ if test $ac_cv_have_decl_$1 = yes; then
+ gt_value=1
+ else
+ gt_value=0
+ fi
+ AC_DEFINE_UNQUOTED([HAVE_DECL_]translit($1, [a-z], [A-Z]), [$gt_value],
+ [Define to 1 if you have the declaration of `$1', and to 0 if you don't.])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
--- /dev/null
+# glibc2.m4 serial 1
+dnl Copyright (C) 2000-2002, 2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.0 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([gt_GLIBC2],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2 or newer,
+ ac_cv_gnu_library_2,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ >= 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2=yes,
+ ac_cv_gnu_library_2=no)
+ ]
+ )
+ AC_SUBST(GLIBC2)
+ GLIBC2="$ac_cv_gnu_library_2"
+ ]
+)
--- /dev/null
+# glibc21.m4 serial 3
+dnl Copyright (C) 2000-2002, 2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([gl_GLIBC21],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+ ac_cv_gnu_library_2_1,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2_1=yes,
+ ac_cv_gnu_library_2_1=no)
+ ]
+ )
+ AC_SUBST(GLIBC21)
+ GLIBC21="$ac_cv_gnu_library_2_1"
+ ]
+)
--- /dev/null
+# iconv.m4 serial AM4 (gettext-0.11.3)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST(LIBICONV)
+ AC_SUBST(LTLIBICONV)
+])
+
+AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+])
--- /dev/null
+# intdiv0.m4 serial 1 (gettext-0.11.3)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+ AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+ gt_cv_int_divbyzero_sigfpe,
+ [
+ AC_TRY_RUN([
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+#ifdef __cplusplus
+sigfpe_handler (int sig)
+#else
+sigfpe_handler (sig) int sig;
+#endif
+{
+ /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */
+ exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+ signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+ signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL. */
+#if defined (__sparc__) && defined (__linux__)
+ signal (SIGILL, sigfpe_handler);
+#endif
+
+ z = x / y;
+ nan = y / y;
+ exit (1);
+}
+], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no,
+ [
+ # Guess based on the CPU.
+ case "$host_cpu" in
+ alpha* | i[34567]86 | m68k | s390*)
+ gt_cv_int_divbyzero_sigfpe="guessing yes";;
+ *)
+ gt_cv_int_divbyzero_sigfpe="guessing no";;
+ esac
+ ])
+ ])
+ case "$gt_cv_int_divbyzero_sigfpe" in
+ *yes) value=1;;
+ *) value=0;;
+ esac
+ AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value,
+ [Define if integer division by zero raises signal SIGFPE.])
+])
--- /dev/null
+# intmax.m4 serial 2 (gettext-0.14.2)
+dnl Copyright (C) 2002-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the system has the 'intmax_t' type, but don't attempt to
+dnl find a replacement if it is lacking.
+
+AC_DEFUN([gt_TYPE_INTMAX_T],
+[
+ AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+ AC_CACHE_CHECK(for intmax_t, gt_cv_c_intmax_t,
+ [AC_TRY_COMPILE([
+#include <stddef.h>
+#include <stdlib.h>
+#if HAVE_STDINT_H_WITH_UINTMAX
+#include <stdint.h>
+#endif
+#if HAVE_INTTYPES_H_WITH_UINTMAX
+#include <inttypes.h>
+#endif
+], [intmax_t x = -1;], gt_cv_c_intmax_t=yes, gt_cv_c_intmax_t=no)])
+ if test $gt_cv_c_intmax_t = yes; then
+ AC_DEFINE(HAVE_INTMAX_T, 1,
+ [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+ fi
+])
--- /dev/null
+# inttypes-pri.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
+# macros to non-string values. This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+ AC_REQUIRE([gt_HEADER_INTTYPES_H])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+ gt_cv_inttypes_pri_broken,
+ [
+ AC_TRY_COMPILE([#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes)
+ ])
+ fi
+ if test "$gt_cv_inttypes_pri_broken" = yes; then
+ AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1,
+ [Define if <inttypes.h> exists and defines unusable PRI* macros.])
+ fi
+])
--- /dev/null
+# inttypes.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if <inttypes.h> exists and doesn't clash with
+# <sys/types.h>.
+
+AC_DEFUN([gt_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h,
+ [
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no)
+ ])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+ [Define if <inttypes.h> exists and doesn't clash with <sys/types.h>.])
+ fi
+])
--- /dev/null
+# inttypes_h.m4 serial 6
+dnl Copyright (C) 1997-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gl_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ gl_cv_header_inttypes_h=yes,
+ gl_cv_header_inttypes_h=no)])
+ if test $gl_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+ [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
+])
--- /dev/null
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
--- /dev/null
+# lcmessage.m4 serial 4 (gettext-0.14.2)
+dnl Copyright (C) 1995-2002, 2004-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+
+AC_DEFUN([gt_LC_MESSAGES],
+[
+ AC_CACHE_CHECK([for LC_MESSAGES], gt_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ gt_cv_val_LC_MESSAGES=yes, gt_cv_val_LC_MESSAGES=no)])
+ if test $gt_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
+ fi
+])
--- /dev/null
+# lib-ld.m4 serial 3 (gettext-0.13)
+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
--- /dev/null
+# lib-link.m4 serial 6 (gettext-0.14.3)
+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ(2.50)
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIB[]NAME"
+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator,
+dnl hardcode_direct, hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib$1-prefix],
+[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib$1-prefix don't search for lib$1 in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ if test $use_additional = yes; then
+ if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_dir="$additional_libdir"
+ found_so="$additional_libdir/lib$name.$shlibext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then
+ found_dir="$dir"
+ found_so="$dir/lib$name.$shlibext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */lib | */lib/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'`
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
--- /dev/null
+# lib-prefix.m4 serial 4 (gettext-0.14.2)
+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/lib"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/lib"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/lib"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
--- /dev/null
+# longdouble.m4 serial 1 (gettext-0.12)
+dnl Copyright (C) 2002-2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the compiler supports the 'long double' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_LONGDOUBLE],
+[
+ AC_CACHE_CHECK([for long double], gt_cv_c_long_double,
+ [if test "$GCC" = yes; then
+ gt_cv_c_long_double=yes
+ else
+ AC_TRY_COMPILE([
+ /* The Stardent Vistra knows sizeof(long double), but does not support it. */
+ long double foo = 0.0;
+ /* On Ultrix 4.3 cc, long double is 4 and double is 8. */
+ int array [2*(sizeof(long double) >= sizeof(double)) - 1];
+ ], ,
+ gt_cv_c_long_double=yes, gt_cv_c_long_double=no)
+ fi])
+ if test $gt_cv_c_long_double = yes; then
+ AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the 'long double' type.])
+ fi
+])
--- /dev/null
+# longlong.m4 serial 5
+dnl Copyright (C) 1999-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_LONG_LONG if 'long long' works.
+
+AC_DEFUN([gl_AC_TYPE_LONG_LONG],
+[
+ AC_CACHE_CHECK([for long long], ac_cv_type_long_long,
+ [AC_TRY_LINK([long long ll = 1LL; int i = 63;],
+ [long long llmax = (long long) -1;
+ return ll << i | ll >> i | llmax / ll | llmax % ll;],
+ ac_cv_type_long_long=yes,
+ ac_cv_type_long_long=no)])
+ if test $ac_cv_type_long_long = yes; then
+ AC_DEFINE(HAVE_LONG_LONG, 1,
+ [Define if you have the 'long long' type.])
+ fi
+])
--- /dev/null
+# nls.m4 serial 2 (gettext-0.14.3)
+dnl Copyright (C) 1995-2003, 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ(2.50)
+
+AC_DEFUN([AM_NLS],
+[
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+])
+
+AC_DEFUN([AM_MKINSTALLDIRS],
+[
+ dnl Tell automake >= 1.10 to complain if mkinstalldirs is missing.
+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([mkinstalldirs])])
+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+ dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
+ dnl Try to locate it.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ case "$ac_aux_dir" in
+ /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;;
+ *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;;
+ esac
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+ AC_SUBST(MKINSTALLDIRS)
+])
--- /dev/null
+# po.m4 serial 7 (gettext-0.14.3)
+dnl Copyright (C) 1995-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ(2.50)
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_MKINSTALLDIRS])dnl
+ AC_REQUIRE([AM_NLS])dnl
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU msgfmt.
+ if test "$GMSGFMT" != ":"; then
+ dnl If it is no GNU msgfmt we define it as : so that the
+ dnl Makefiles still can work.
+ if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 &&
+ (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'`
+ AC_MSG_RESULT(
+ [found $GMSGFMT program is not GNU msgfmt; ignore it])
+ GMSGFMT=":"
+ fi
+ fi
+
+ dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is no GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 &&
+ (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+ fi
+
+ AC_OUTPUT_COMMANDS([
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+ # When this code is run, in config.status, two variables have already been
+ # set:
+ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+ # - LINGUAS is the value of the environment variable LINGUAS at configure
+ # time.
+
+changequote(,)dnl
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ # Find a way to echo strings without interpreting backslash.
+ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='echo'
+ else
+ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='printf %s\n'
+ else
+ echo_func () {
+ cat <<EOT
+$*
+EOT
+ }
+ gt_echo='echo_func'
+ fi
+ fi
+
+ # A sed script that extracts the value of VARIABLE from a Makefile.
+ sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^[ ]*VARIABLE[ ]*=/{
+ # Seen the first line of the variable definition.
+ s/^[ ]*VARIABLE[ ]*=//
+ ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+ # Set POTFILES to the value of the Makefile variable POTFILES.
+ sed_x_POTFILES="`$gt_echo \"$sed_x_variable\" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`"
+ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+ # Compute POTFILES_DEPS as
+ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+ POTFILES_DEPS=
+ for file in $POTFILES; do
+ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+ done
+ POMAKEFILEDEPS=""
+
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+ sed_x_LINGUAS="`$gt_echo \"$sed_x_variable\" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`"
+ ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+ fi
+ # Hide the ALL_LINGUAS assigment from automake.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ # Compute PROPERTIESFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+ # Compute CLASSFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+ # Compute QMFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+ # Compute MSGFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+ # Compute RESOURCESDLLFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ PROPERTIESFILES=
+ CLASSFILES=
+ QMFILES=
+ MSGFILES=
+ RESOURCESDLLFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+ CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+ QMFILES="$QMFILES $srcdirpre$lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ JAVACATALOGS=
+ QTCATALOGS=
+ TCLCATALOGS=
+ CSHARPCATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+ QTCATALOGS="$QTCATALOGS $lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ fi
+
+ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+ @echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+ \$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+ @echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+ \$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if test -n "$POMAKEFILEDEPS"; then
+ cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+ fi
+ mv "$ac_file.tmp" "$ac_file"
+])
--- /dev/null
+# printf-posix.m4 serial 2 (gettext-0.13.1)
+dnl Copyright (C) 2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the printf() function supports POSIX/XSI format strings with
+dnl positions.
+
+AC_DEFUN([gt_PRINTF_POSIX],
+[
+ AC_REQUIRE([AC_PROG_CC])
+ AC_CACHE_CHECK([whether printf() supports POSIX/XSI format strings],
+ gt_cv_func_printf_posix,
+ [
+ AC_TRY_RUN([
+#include <stdio.h>
+#include <string.h>
+/* The string "%2$d %1$d", with dollar characters protected from the shell's
+ dollar expansion (possibly an autoconf bug). */
+static char format[] = { '%', '2', '$', 'd', ' ', '%', '1', '$', 'd', '\0' };
+static char buf[100];
+int main ()
+{
+ sprintf (buf, format, 33, 55);
+ return (strcmp (buf, "55 33") != 0);
+}], gt_cv_func_printf_posix=yes, gt_cv_func_printf_posix=no,
+ [
+ AC_EGREP_CPP(notposix, [
+#if defined __NetBSD__ || defined _MSC_VER || defined __MINGW32__ || defined __CYGWIN__
+ notposix
+#endif
+ ], gt_cv_func_printf_posix="guessing no",
+ gt_cv_func_printf_posix="guessing yes")
+ ])
+ ])
+ case $gt_cv_func_printf_posix in
+ *yes)
+ AC_DEFINE(HAVE_POSIX_PRINTF, 1,
+ [Define if your printf() function supports format strings with positions.])
+ ;;
+ esac
+])
--- /dev/null
+# progtest.m4 serial 4 (gettext-0.14.2)
+dnl Copyright (C) 1996-2003, 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+AC_PREREQ(2.50)
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ [[\\/]]* | ?:[[\\/]]*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
--- /dev/null
+# signed.m4 serial 1 (gettext-0.10.40)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([bh_C_SIGNED],
+[
+ AC_CACHE_CHECK([for signed], bh_cv_c_signed,
+ [AC_TRY_COMPILE(, [signed char x;], bh_cv_c_signed=yes, bh_cv_c_signed=no)])
+ if test $bh_cv_c_signed = no; then
+ AC_DEFINE(signed, ,
+ [Define to empty if the C compiler doesn't support this keyword.])
+ fi
+])
--- /dev/null
+# size_max.m4 serial 2
+dnl Copyright (C) 2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gl_SIZE_MAX],
+[
+ AC_CHECK_HEADERS(stdint.h)
+ dnl First test whether the system already has SIZE_MAX.
+ AC_MSG_CHECKING([for SIZE_MAX])
+ result=
+ AC_EGREP_CPP([Found it], [
+#include <limits.h>
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef SIZE_MAX
+Found it
+#endif
+], result=yes)
+ if test -z "$result"; then
+ dnl Define it ourselves. Here we assume that the type 'size_t' is not wider
+ dnl than the type 'unsigned long'.
+ dnl The _AC_COMPUTE_INT macro works up to LONG_MAX, since it uses 'expr',
+ dnl which is guaranteed to work from LONG_MIN to LONG_MAX.
+ _AC_COMPUTE_INT([~(size_t)0 / 10], res_hi,
+ [#include <stddef.h>], result=?)
+ _AC_COMPUTE_INT([~(size_t)0 % 10], res_lo,
+ [#include <stddef.h>], result=?)
+ _AC_COMPUTE_INT([sizeof (size_t) <= sizeof (unsigned int)], fits_in_uint,
+ [#include <stddef.h>], result=?)
+ if test "$fits_in_uint" = 1; then
+ dnl Even though SIZE_MAX fits in an unsigned int, it must be of type
+ dnl 'unsigned long' if the type 'size_t' is the same as 'unsigned long'.
+ AC_TRY_COMPILE([#include <stddef.h>
+ extern size_t foo;
+ extern unsigned long foo;
+ ], [], fits_in_uint=0)
+ fi
+ if test -z "$result"; then
+ if test "$fits_in_uint" = 1; then
+ result="$res_hi$res_lo"U
+ else
+ result="$res_hi$res_lo"UL
+ fi
+ else
+ dnl Shouldn't happen, but who knows...
+ result='~(size_t)0'
+ fi
+ fi
+ AC_MSG_RESULT([$result])
+ if test "$result" != yes; then
+ AC_DEFINE_UNQUOTED([SIZE_MAX], [$result],
+ [Define as the maximum value of type 'size_t', if the system doesn't define it.])
+ fi
+])
--- /dev/null
+# stdint_h.m4 serial 5
+dnl Copyright (C) 1997-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_STDINT_H],
+[
+ AC_CACHE_CHECK([for stdint.h], gl_cv_header_stdint_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <stdint.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ gl_cv_header_stdint_h=yes,
+ gl_cv_header_stdint_h=no)])
+ if test $gl_cv_header_stdint_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+ [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
+])
--- /dev/null
+# uintmax_t.m4 serial 9
+dnl Copyright (C) 1997-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define uintmax_t to 'unsigned long' or 'unsigned long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+AC_DEFUN([gl_AC_TYPE_UINTMAX_T],
+[
+ AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+ if test $gl_cv_header_inttypes_h = no && test $gl_cv_header_stdint_h = no; then
+ AC_REQUIRE([gl_AC_TYPE_UNSIGNED_LONG_LONG])
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
+ AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
+ [Define to unsigned long or unsigned long long
+ if <stdint.h> and <inttypes.h> don't define.])
+ else
+ AC_DEFINE(HAVE_UINTMAX_T, 1,
+ [Define if you have the 'uintmax_t' type in <stdint.h> or <inttypes.h>.])
+ fi
+])
--- /dev/null
+# ulonglong.m4 serial 4
+dnl Copyright (C) 1999-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_UNSIGNED_LONG_LONG if 'unsigned long long' works.
+
+AC_DEFUN([gl_AC_TYPE_UNSIGNED_LONG_LONG],
+[
+ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+ [AC_TRY_LINK([unsigned long long ull = 1ULL; int i = 63;],
+ [unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+ ac_cv_type_unsigned_long_long=yes,
+ ac_cv_type_unsigned_long_long=no)])
+ if test $ac_cv_type_unsigned_long_long = yes; then
+ AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
+ [Define if you have the 'unsigned long long' type.])
+ fi
+])
--- /dev/null
+# wchar_t.m4 serial 1 (gettext-0.12)
+dnl Copyright (C) 2002-2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <stddef.h> has the 'wchar_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WCHAR_T],
+[
+ AC_CACHE_CHECK([for wchar_t], gt_cv_c_wchar_t,
+ [AC_TRY_COMPILE([#include <stddef.h>
+ wchar_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wchar_t=yes, gt_cv_c_wchar_t=no)])
+ if test $gt_cv_c_wchar_t = yes; then
+ AC_DEFINE(HAVE_WCHAR_T, 1, [Define if you have the 'wchar_t' type.])
+ fi
+])
--- /dev/null
+# wint_t.m4 serial 1 (gettext-0.12)
+dnl Copyright (C) 2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <wchar.h> has the 'wint_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WINT_T],
+[
+ AC_CACHE_CHECK([for wint_t], gt_cv_c_wint_t,
+ [AC_TRY_COMPILE([#include <wchar.h>
+ wint_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wint_t=yes, gt_cv_c_wint_t=no)])
+ if test $gt_cv_c_wint_t = yes; then
+ AC_DEFINE(HAVE_WINT_T, 1, [Define if you have the 'wint_t' type.])
+ fi
+])
--- /dev/null
+# xsize.m4 serial 3
+dnl Copyright (C) 2003-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_XSIZE],
+[
+ dnl Prerequisites of lib/xsize.h.
+ AC_REQUIRE([gl_SIZE_MAX])
+ AC_REQUIRE([AC_C_INLINE])
+ AC_CHECK_HEADERS(stdint.h)
+])
--- /dev/null
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+
+scriptversion=2005-06-29.22
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+errstatus=0
+dirmode=
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit $?
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit $?
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
+esac
+
+for file
+do
+ case $file in
+ /*) pathcomp=/ ;;
+ *) pathcomp= ;;
+ esac
+ oIFS=$IFS
+ IFS=/
+ set fnord $file
+ shift
+ IFS=$oIFS
+
+ for d
+ do
+ test "x$d" = x && continue
+
+ pathcomp=$pathcomp$d
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp=$pathcomp/
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
--- /dev/null
+POTFILES
+Makefile
+Makefile.in
--- /dev/null
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2005 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.14.3
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datadir = @datadir@
+localedir = $(datadir)/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
+
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+ else \
+ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+ fi; \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address="$$msgid_bugs_address"
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir) || exit 1; \
+ else \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
+ $(SHELL) ./config.status
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Linux-PAM Project
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = http://sourceforge.net/projects/pam
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
--- /dev/null
+# List of source files which contain translatable strings.
+./conf/pam_conv1/pam_conv.c
+./conf/pam_conv1/lex.yy.c
+./libpamc/test/regress/test.libpamc.c
+./libpamc/test/modules/pam_secret.c
+./libpamc/pamc_converse.c
+./libpamc/pamc_load.c
+./libpamc/pamc_client.c
+./dynamic/pam.c
+./dynamic/test.c
+./modules/pam_access/pam_access.c
+./modules/pam_localuser/pam_localuser.c
+./modules/pam_debug/pam_debug.c
+./modules/pam_group/pam_group.c
+./modules/pam_issue/pam_issue.c
+./modules/pam_tally/pam_tally.c
+./modules/pam_tally/pam_tally_app.c
+./modules/pam_umask/pam_umask.c
+./modules/pam_wheel/pam_wheel.c
+./modules/pam_xauth/pam_xauth.c
+./modules/pam_filter/upperLOWER/upperLOWER.c
+./modules/pam_filter/pam_filter.c
+./modules/pam_lastlog/pam_lastlog.c
+./modules/pam_mkhomedir/pam_mkhomedir.c
+./modules/pam_limits/pam_limits.c
+./modules/pam_selinux/pam_selinux_check.c
+./modules/pam_selinux/pam_selinux.c
+./modules/pam_permit/pam_permit.c
+./modules/pam_radius/pam_radius.c
+./modules/pammodutil/modutil_getlogin.c
+./modules/pammodutil/modutil_cleanup.c
+./modules/pammodutil/modutil_getspnam.c
+./modules/pammodutil/modutil_ingroup.c
+./modules/pammodutil/modutil_getgrgid.c
+./modules/pammodutil/modutil_getgrnam.c
+./modules/pammodutil/modutil_getpwnam.c
+./modules/pammodutil/modutil_getpwuid.c
+./modules/pammodutil/modutil_ioloop.c
+./modules/pam_deny/pam_deny.c
+./modules/pam_rhosts/pam_rhosts_auth.c
+./modules/pam_mail/pam_mail.c
+./modules/pam_motd/pam_motd.c
+./modules/pam_pwdb/md5.c
+./modules/pam_pwdb/md5_broken.c
+./modules/pam_pwdb/pam_pwdb.c
+./modules/pam_pwdb/md5_good.c
+./modules/pam_pwdb/pwdb_chkpwd.c
+./modules/pam_pwdb/md5_crypt.c
+./modules/pam_time/pam_time.c
+./modules/pam_unix/md5.c
+./modules/pam_unix/md5_broken.c
+./modules/pam_unix/bigcrypt_main.c
+./modules/pam_unix/md5_good.c
+./modules/pam_unix/bigcrypt.c
+./modules/pam_unix/pam_unix_acct.c
+./modules/pam_unix/unix_chkpwd.c
+./modules/pam_unix/pam_unix_auth.c
+./modules/pam_unix/support.c
+./modules/pam_unix/md5_crypt.c
+./modules/pam_unix/pam_unix_passwd.c
+./modules/pam_unix/pam_unix_sess.c
+./modules/pam_unix/yppasswd_xdr.c
+./modules/pam_warn/pam_warn.c
+./modules/pam_rootok/pam_rootok.c
+./modules/pam_shells/pam_shells.c
+./modules/pam_stress/pam_stress.c
+./modules/pam_cracklib/pam_cracklib.c
+./modules/pam_userdb/pam_userdb.c
+./modules/pam_userdb/conv.c
+./modules/pam_securetty/pam_securetty.c
+./modules/pam_succeed_if/pam_succeed_if.c
+./modules/pam_nologin/pam_nologin.c
+./modules/pam_listfile/pam_listfile.c
+./modules/pam_env/pam_env.c
+./modules/pam_ftp/pam_ftp.c
+./libpam/pam_delay.c
+./libpam/pam_handlers.c
+./libpam/pam_auth.c
+./libpam/pam_data.c
+./libpam/pam_end.c
+./libpam/pam_env.c
+./libpam/pam_log.c
+./libpam/pam_item.c
+./libpam/pam_misc.c
+./libpam/pam_static.c
+./libpam/pam_dispatch.c
+./libpam/pam_start.c
+./libpam/pam_strerror.c
+./libpam/pam_password.c
+./libpam/pam_session.c
+./libpam/pam_prelude.c
+./libpam/pam_account.c
+./libpam/pam_malloc.c
+./examples/xsh.c
+./examples/check_user.c
+./examples/vpass.c
+./examples/blank.c
+./libpam_misc/help_env.c
+./libpam_misc/misc_conv.c
--- /dev/null
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+ $(MAKE) en@quot.po-update
+en@boldquot.po-create:
+ $(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en@quot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“\e[1m/g
+s/”/\e[0m”/g
+s/‘/‘\e[1m/g
+s/’/\e[0m’/g
--- /dev/null
+# translation of Linux-PAM.po to cs_CZ
+# This file is distributed under the same license as the PACKAGE package.
+# Copyright (C) YEAR Linux-PAM Project.
+# Klara Cihlarova <koty@seznam.cz>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Linux-PAM\n"
+"Report-Msgid-Bugs-To: http://sourceforge.net/projects/pam\n"
+"POT-Creation-Date: 2005-08-18 14:53+0200\n"
+"PO-Revision-Date: 2005-08-05 13:58+0200\n"
+"Last-Translator: Klara Cihlarova <koty@seznam.cz>\n"
+"Language-Team: cs_CZ <cs@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.1\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%"
+"10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);\n"
+
+#: modules/pam_tally/pam_tally.c:730
+msgid "Authentication error"
+msgstr "Chyba ověřování"
+
+#: modules/pam_tally/pam_tally.c:731
+msgid "Service error"
+msgstr "Chyba služby"
+
+#: modules/pam_tally/pam_tally.c:732
+msgid "Unknown user"
+msgstr "Neznámý uživatel"
+
+#: modules/pam_tally/pam_tally.c:733
+msgid "Unknown error"
+msgstr "Neznámá chyba"
+
+#: modules/pam_tally/pam_tally.c:747
+#, c-format
+msgid "%s: Bad number given to --reset=\n"
+msgstr "%s: Zadána špatná hodnota --reset=\n"
+
+#: modules/pam_tally/pam_tally.c:751
+#, c-format
+msgid "%s: Unrecognised option %s\n"
+msgstr "%s: Neznámá volba %s\n"
+
+#: modules/pam_tally/pam_tally.c:763
+#, c-format
+msgid ""
+"%s: [--file rooted-filename] [--user username] [--reset[=n]] [--quiet]\n"
+msgstr ""
+"%s: [--file jmeno_souboru] [--user uzivatelske_jmeno] [--reset[=n]] [--"
+"quiet]\n"
+
+#: modules/pam_tally/pam_tally.c:836
+#, c-format
+msgid "%s: Can't reset all users to non-zero\n"
+msgstr "%s: Nelze resetovat všechny uživatele nenulově\n"
+
+#: modules/pam_selinux/pam_selinux.c:129
+#, c-format
+msgid "Your default context is %s. \n"
+msgstr "Vaše výchozí vazba je %s. \n"
+
+#: modules/pam_selinux/pam_selinux.c:132
+msgid "Do you want to choose a different one? [n]"
+msgstr "Chcete zvolit jinou? [n]"
+
+#: modules/pam_selinux/pam_selinux.c:139
+msgid "Enter number of choice: "
+msgstr "Zadejte číslo volby: "
+
+#: modules/pam_selinux/pam_selinux.c:191
+msgid "Would you like to enter a security context? [y] "
+msgstr "Chcete vložit bezpečnostní vazby? [y]"
+
+#: modules/pam_selinux/pam_selinux.c:208
+msgid "role: "
+msgstr "role: "
+
+#: modules/pam_selinux/pam_selinux.c:216
+msgid "type: "
+msgstr "typ: "
+
+#: modules/pam_selinux/pam_selinux.c:226
+msgid "level: "
+msgstr "úroveň: "
+
+#: modules/pam_selinux/pam_selinux.c:240
+msgid "Not a valid security context"
+msgstr "Neplatné bezpečnostní vazby"
+
+#: modules/pam_selinux/pam_selinux.c:475
+#, c-format
+msgid "Security Context %s Assigned"
+msgstr "Bezpečnostní vazba %s přidělena"
+
+#: modules/pam_selinux/pam_selinux.c:595
+#, c-format
+msgid "failed to initialize PAM\n"
+msgstr "chyba při inicializaci PAM\n"
+
+#: modules/pam_selinux/pam_selinux.c:601
+#, c-format
+msgid "failed to pam_set_item()\n"
+msgstr "chyba pam_set_item()\n"
+
+#: modules/pam_selinux/pam_selinux.c:626
+#, c-format
+msgid "login: failure forking: %s"
+msgstr "login: chyba forku: %s"
+
+#: modules/pam_unix/pam_unix_acct.c:268 modules/pam_unix/pam_unix_acct.c:295
+msgid "Your account has expired; please contact your system administrator"
+msgstr "Váš účet vypršel; kontaktujte prosím svého správce systému"
+
+#: modules/pam_unix/pam_unix_acct.c:277
+msgid "You are required to change your password immediately (root enforced)"
+msgstr "Musíte okamžitě změnit své heslo (vynuceno rootem)"
+
+#: modules/pam_unix/pam_unix_acct.c:304
+msgid "You are required to change your password immediately (password aged)"
+msgstr "Musíte okamžitě změnit své heslo (heslo vypršelo)"
+
+#: modules/pam_unix/pam_unix_acct.c:314
+#, c-format
+msgid "Warning: your password will expire in %d day%.2s"
+msgstr "Varování: Počet dní do vypršení hesla: %d %.2s"
+
+#: modules/pam_unix/pam_unix_passwd.c:818
+msgid "NIS password could not be changed."
+msgstr "NIS heslo nelze změnit."
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "No password supplied"
+msgstr "Nezadáno heslo"
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "Password unchanged"
+msgstr "Heslo nebylo změněno"
+
+#: modules/pam_unix/pam_unix_passwd.c:983
+msgid "You must choose a longer password"
+msgstr "Musíte zvolit delší heslo"
+
+#: modules/pam_unix/pam_unix_passwd.c:988
+msgid "Password has been already used. Choose another."
+msgstr "Heslo již bylo použito. Zvolte jiné."
+
+#: modules/pam_unix/pam_unix_passwd.c:1147
+msgid "You must wait longer to change your password"
+msgstr "Na změnu svého hesla musíte počkat déle"
+
+#: modules/pam_stress/pam_stress.c:481
+msgid "Changing STRESS password for "
+msgstr "Změna hesla pro"
+
+#: modules/pam_stress/pam_stress.c:495
+msgid "Enter new STRESS password: "
+msgstr "Zadejte nové heslo: "
+
+#: modules/pam_stress/pam_stress.c:498
+msgid "Retype new STRESS password: "
+msgstr "Opakujte heslo: "
+
+#: modules/pam_stress/pam_stress.c:526
+msgid "Verification mis-typed; password unchanged"
+msgstr "Chybné potvrzení. Heslo nezměněno"
+
+#: libpam/pam_strerror.c:13
+msgid "Success"
+msgstr "Úspěch"
+
+#: libpam/pam_strerror.c:15
+msgid "Critical error - immediate abort"
+msgstr "Kritická chyba - došlo k okamžitému ukončení"
+
+#: libpam/pam_strerror.c:17
+msgid "dlopen() failure"
+msgstr "selhání dlopen()"
+
+#: libpam/pam_strerror.c:19
+msgid "Symbol not found"
+msgstr "Symbol nenalezen"
+
+#: libpam/pam_strerror.c:21
+msgid "Error in service module"
+msgstr "Chyba v modulu služby"
+
+#: libpam/pam_strerror.c:23
+msgid "System error"
+msgstr "Chyba systému"
+
+#: libpam/pam_strerror.c:25
+msgid "Memory buffer error"
+msgstr "Chyba bufferu paměti"
+
+#: libpam/pam_strerror.c:27
+msgid "Permission denied"
+msgstr "Přístup zamítnut"
+
+#: libpam/pam_strerror.c:29
+msgid "Authentication failure"
+msgstr "Selhání ověření"
+
+#: libpam/pam_strerror.c:31
+msgid "Insufficient credentials to access authentication data"
+msgstr "Nedostatečné přihlašovací údaje pro přístup k ověřovacím datům"
+
+#: libpam/pam_strerror.c:33
+msgid "Authentication service cannot retrieve authentication info."
+msgstr "Ověřovací služba nemůže získat ověřovací informace."
+
+#: libpam/pam_strerror.c:35
+msgid "User not known to the underlying authentication module"
+msgstr "Uživatel není znám podtrženému ověřovacímu modulu"
+
+#: libpam/pam_strerror.c:37
+msgid "Have exhausted maximum number of retries for service."
+msgstr "Dosažen maximální počet pokusů pro službu."
+
+#: libpam/pam_strerror.c:39
+msgid "Authentication token is no longer valid; new one required."
+msgstr "Ověřovací token již není platný; vyžadován nový."
+
+#: libpam/pam_strerror.c:41
+msgid "User account has expired"
+msgstr "Uživatelský účet vypršel"
+
+#: libpam/pam_strerror.c:43
+msgid "Cannot make/remove an entry for the specified session"
+msgstr "Pro zadané sezení nelze vytvořit/odstranit položku"
+
+#: libpam/pam_strerror.c:45
+msgid "Authentication service cannot retrieve user credentials"
+msgstr "Ověřovací služba nemůže získat přihlašovací údaje uživatele"
+
+#: libpam/pam_strerror.c:47
+msgid "User credentials expired"
+msgstr "Přihlašovací údaje uživatele vypršely"
+
+#: libpam/pam_strerror.c:49
+msgid "Failure setting user credentials"
+msgstr "Chyba při zadání přihlašovacích údajů uživatele"
+
+#: libpam/pam_strerror.c:51
+msgid "No module specific data is present"
+msgstr "Nelze najít data potřebná pro modul"
+
+#: libpam/pam_strerror.c:53
+msgid "Bad item passed to pam_*_item()"
+msgstr "Funkci pam_*_item() byla předána špatná položka"
+
+#: libpam/pam_strerror.c:55
+msgid "Conversation error"
+msgstr "Chyba komunikace"
+
+#: libpam/pam_strerror.c:57
+msgid "Authentication token manipulation error"
+msgstr "Chyba manipulace s ověřovacím tokenem"
+
+#: libpam/pam_strerror.c:59
+msgid "Authentication information cannot be recovered"
+msgstr "Ověřovací informace nelze obnovit"
+
+#: libpam/pam_strerror.c:61
+msgid "Authentication token lock busy"
+msgstr "Ověřovací token je zaneprázdněn"
+
+#: libpam/pam_strerror.c:63
+msgid "Authentication token aging disabled"
+msgstr "Stárnutí ověřovacího tokenu zakázáno"
+
+#: libpam/pam_strerror.c:65
+msgid "Failed preliminary check by password service"
+msgstr "Selhání předběžné kontroly služby hesla"
+
+#: libpam/pam_strerror.c:67
+msgid "The return value should be ignored by PAM dispatch"
+msgstr "Návratová hodnota by měla být PAM ignorována"
+
+#: libpam/pam_strerror.c:69
+msgid "Module is unknown"
+msgstr "Neznámý modul"
+
+#: libpam/pam_strerror.c:71
+msgid "Authentication token expired"
+msgstr "Ověřovací token vypršel"
+
+#: libpam/pam_strerror.c:73
+msgid "Conversation is waiting for event"
+msgstr "Komunikace čeká na událost"
+
+#: libpam/pam_strerror.c:75
+msgid "Application needs to call libpam again"
+msgstr "Aplikace vyžaduje nové volání libpam"
+
+#: libpam/pam_strerror.c:78
+msgid "Unknown PAM error"
+msgstr "Neznámá chyba PAM"
+
+#: libpam_misc/misc_conv.c:35
+msgid "..\a.Time is running out...\n"
+msgstr ".. .Odpočet byl spuštěn...\n"
+
+#: libpam_misc/misc_conv.c:36
+msgid "..\a.Sorry, your time is up!\n"
+msgstr ".. .Čas vypršel!\n"
+
+#: libpam_misc/misc_conv.c:334
+#, c-format
+msgid "erroneous conversation (%d)\n"
+msgstr "nesprávná komunikace (%d)\n"
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
--- /dev/null
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Linux-PAM Project
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Linux-PAM 0.80\n"
+"Report-Msgid-Bugs-To: http://sourceforge.net/projects/pam\n"
+"POT-Creation-Date: 2005-08-18 14:53+0200\n"
+"PO-Revision-Date: 2005-08-07 02:59+0100\n"
+"Last-Translator: Szabolcs Varga <shirokuma@shirokuma.hu>\n"
+"Language-Team: hu\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: modules/pam_tally/pam_tally.c:730
+msgid "Authentication error"
+msgstr "Hitelesítési hiba"
+
+#: modules/pam_tally/pam_tally.c:731
+msgid "Service error"
+msgstr "Szolgáltatási hiba"
+
+#: modules/pam_tally/pam_tally.c:732
+msgid "Unknown user"
+msgstr "Ismeretlen felhasználó"
+
+#: modules/pam_tally/pam_tally.c:733
+msgid "Unknown error"
+msgstr "Ismeretlen hiba"
+
+#: modules/pam_tally/pam_tally.c:747
+#, c-format
+msgid "%s: Bad number given to --reset=\n"
+msgstr "%s: Rossz szám lett megadva: --reset=\n"
+
+#: modules/pam_tally/pam_tally.c:751
+#, c-format
+msgid "%s: Unrecognised option %s\n"
+msgstr "%s: Fel nem ismert paraméter (%s)\n"
+
+#: modules/pam_tally/pam_tally.c:763
+#, c-format
+msgid ""
+"%s: [--file rooted-filename] [--user username] [--reset[=n]] [--quiet]\n"
+msgstr ""
+"%s: [--file rooted-fájlnév] [--user felhasználónév] [--reset[=n]] [--quiet]\n"
+
+#: modules/pam_tally/pam_tally.c:836
+#, c-format
+msgid "%s: Can't reset all users to non-zero\n"
+msgstr "%s: Nem állítható vissza minden felhasználó nem nullára\n"
+
+#: modules/pam_selinux/pam_selinux.c:129
+#, c-format
+msgid "Your default context is %s. \n"
+msgstr "Az Ön alapértelmezett kontextusa: %s. \n"
+
+#: modules/pam_selinux/pam_selinux.c:132
+msgid "Do you want to choose a different one? [n]"
+msgstr "Kíván másikat választani? [n]"
+
+#: modules/pam_selinux/pam_selinux.c:139
+msgid "Enter number of choice: "
+msgstr "Adja meg a kívánt lehetőség számát:"
+
+#: modules/pam_selinux/pam_selinux.c:191
+msgid "Would you like to enter a security context? [y] "
+msgstr "Kíván megadni egy biztonsági kontextust? [y] "
+
+#: modules/pam_selinux/pam_selinux.c:208
+msgid "role: "
+msgstr "szerep:"
+
+#: modules/pam_selinux/pam_selinux.c:216
+msgid "type: "
+msgstr "típus:"
+
+#: modules/pam_selinux/pam_selinux.c:226
+msgid "level: "
+msgstr "szint:"
+
+#: modules/pam_selinux/pam_selinux.c:240
+msgid "Not a valid security context"
+msgstr "Nem érvényes biztonsági kontextus"
+
+#: modules/pam_selinux/pam_selinux.c:475
+#, c-format
+msgid "Security Context %s Assigned"
+msgstr "%s biztonsági kontextus hozzárendelve"
+
+#: modules/pam_selinux/pam_selinux.c:595
+#, c-format
+msgid "failed to initialize PAM\n"
+msgstr "PAM inicializálása sikertelen\n"
+
+#: modules/pam_selinux/pam_selinux.c:601
+#, c-format
+msgid "failed to pam_set_item()\n"
+msgstr "pam_set_item() meghiúsult\n"
+
+#: modules/pam_selinux/pam_selinux.c:626
+#, c-format
+msgid "login: failure forking: %s"
+msgstr "bejelentkezés: hiba az elágazás közben: %s"
+
+#: modules/pam_unix/pam_unix_acct.c:268 modules/pam_unix/pam_unix_acct.c:295
+msgid "Your account has expired; please contact your system administrator"
+msgstr "A fiók érvényessége lejárt; keresse meg a rendszergazdát"
+
+#: modules/pam_unix/pam_unix_acct.c:277
+msgid "You are required to change your password immediately (root enforced)"
+msgstr "Azonnal meg kell változtatnia a jelszavát (a root írta elő)"
+
+#: modules/pam_unix/pam_unix_acct.c:304
+msgid "You are required to change your password immediately (password aged)"
+msgstr "Azonnal meg kell változtatnia a jelszavát (a jelszó elévült)"
+
+#: modules/pam_unix/pam_unix_acct.c:314
+#, c-format
+msgid "Warning: your password will expire in %d day%.2s"
+msgstr "Figyelmeztetés: a jelszava lejár %d nap múlva%.2s"
+
+#: modules/pam_unix/pam_unix_passwd.c:818
+msgid "NIS password could not be changed."
+msgstr "A NIS-jelszó nem módosítható."
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "No password supplied"
+msgstr "Nem lett megadva jelszó"
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "Password unchanged"
+msgstr "A jelszó nem változott"
+
+#: modules/pam_unix/pam_unix_passwd.c:983
+msgid "You must choose a longer password"
+msgstr "Hosszabb jelszót kell választania"
+
+#: modules/pam_unix/pam_unix_passwd.c:988
+msgid "Password has been already used. Choose another."
+msgstr "A jelszót már használta. Válasszon egy másikat."
+
+#: modules/pam_unix/pam_unix_passwd.c:1147
+msgid "You must wait longer to change your password"
+msgstr "Tovább kell várnia a jelszó módosítására"
+
+#: modules/pam_stress/pam_stress.c:481
+msgid "Changing STRESS password for "
+msgstr "STRESS jelszó megváltoztatása - "
+
+#: modules/pam_stress/pam_stress.c:495
+msgid "Enter new STRESS password: "
+msgstr "Új STRESS jelszó: "
+
+#: modules/pam_stress/pam_stress.c:498
+msgid "Retype new STRESS password: "
+msgstr "Írja be mégegyszer az új STRESS jelszót:"
+
+#: modules/pam_stress/pam_stress.c:526
+msgid "Verification mis-typed; password unchanged"
+msgstr "Az ellenőrző jelszó nem egyezik; a jelszó nem került módosításra"
+
+#: libpam/pam_strerror.c:13
+msgid "Success"
+msgstr "Sikerült"
+
+#: libpam/pam_strerror.c:15
+msgid "Critical error - immediate abort"
+msgstr "Kritikus hiba - azonnali leállás"
+
+#: libpam/pam_strerror.c:17
+msgid "dlopen() failure"
+msgstr "dlopen() hiba"
+
+#: libpam/pam_strerror.c:19
+msgid "Symbol not found"
+msgstr "A szimbólum nem található"
+
+#: libpam/pam_strerror.c:21
+msgid "Error in service module"
+msgstr "Hiba a szervizmodulban"
+
+#: libpam/pam_strerror.c:23
+msgid "System error"
+msgstr "Rendszerhiba"
+
+#: libpam/pam_strerror.c:25
+msgid "Memory buffer error"
+msgstr "Memóriapuffer-hiba"
+
+#: libpam/pam_strerror.c:27
+msgid "Permission denied"
+msgstr "Engedély megtagadva"
+
+#: libpam/pam_strerror.c:29
+msgid "Authentication failure"
+msgstr "Hitelesítési hiba"
+
+#: libpam/pam_strerror.c:31
+msgid "Insufficient credentials to access authentication data"
+msgstr "Nem elegendő azonosítási adat a hitelesítési adatok eléréséhez"
+
+#: libpam/pam_strerror.c:33
+msgid "Authentication service cannot retrieve authentication info."
+msgstr "A hitelesítési szolgáltatás nem tudja lekérni a hitelesítési adatokat."
+
+#: libpam/pam_strerror.c:35
+msgid "User not known to the underlying authentication module"
+msgstr "Az alsóbb szintű hitelesítési modul nem ismeri a felhasználót"
+
+#: libpam/pam_strerror.c:37
+msgid "Have exhausted maximum number of retries for service."
+msgstr ""
+"Elérte a szolgáltatás által engedélyezett újrapróbálkozások maximális számát."
+
+#: libpam/pam_strerror.c:39
+msgid "Authentication token is no longer valid; new one required."
+msgstr "A hitelesítési token már nem érvényes; újra van szükség."
+
+#: libpam/pam_strerror.c:41
+msgid "User account has expired"
+msgstr "A felhasználói fiók lejárt"
+
+#: libpam/pam_strerror.c:43
+msgid "Cannot make/remove an entry for the specified session"
+msgstr "Nem készíthető/törölhető bejegyzés az adott munkamenethez"
+
+#: libpam/pam_strerror.c:45
+msgid "Authentication service cannot retrieve user credentials"
+msgstr ""
+"A hitelesítési szolgáltatás nem tudja lekérni a felhasználó hitelesítési "
+"adatait"
+
+#: libpam/pam_strerror.c:47
+msgid "User credentials expired"
+msgstr "A felhasználó hitelesítési adatai lejártak"
+
+#: libpam/pam_strerror.c:49
+msgid "Failure setting user credentials"
+msgstr "Hiba a felhasználó hitelesítési adatainak beállítása közben"
+
+#: libpam/pam_strerror.c:51
+msgid "No module specific data is present"
+msgstr "Nem található modulspecifikus adat"
+
+#: libpam/pam_strerror.c:53
+msgid "Bad item passed to pam_*_item()"
+msgstr "Rossz elem lett átadva a pam_*_item() számára"
+
+#: libpam/pam_strerror.c:55
+msgid "Conversation error"
+msgstr "Beszélgetési hiba"
+
+#: libpam/pam_strerror.c:57
+msgid "Authentication token manipulation error"
+msgstr "Hitelesítésitoken-kezelési hiba"
+
+#: libpam/pam_strerror.c:59
+msgid "Authentication information cannot be recovered"
+msgstr "A hitelesítési adatok nem állíthatók helyre"
+
+#: libpam/pam_strerror.c:61
+msgid "Authentication token lock busy"
+msgstr "Hitelesítési token zár foglalt"
+
+#: libpam/pam_strerror.c:63
+msgid "Authentication token aging disabled"
+msgstr "Hitelesítési token lejárat kikapcsolva"
+
+#: libpam/pam_strerror.c:65
+msgid "Failed preliminary check by password service"
+msgstr "A jelszószolgáltatás előzetes ellenőrzésén megbukott"
+
+#: libpam/pam_strerror.c:67
+msgid "The return value should be ignored by PAM dispatch"
+msgstr "A PAM elosztónak a visszatérési értéket figyelmen kívül kell hagynia"
+
+#: libpam/pam_strerror.c:69
+msgid "Module is unknown"
+msgstr "A modul ismeretlen"
+
+#: libpam/pam_strerror.c:71
+msgid "Authentication token expired"
+msgstr "A hitelesítési token lejárt"
+
+#: libpam/pam_strerror.c:73
+msgid "Conversation is waiting for event"
+msgstr "A beszélgetés egy eseményre várakozik"
+
+#: libpam/pam_strerror.c:75
+msgid "Application needs to call libpam again"
+msgstr "Az alkalmazásnak újra meg kell hívnia a libpam modult"
+
+#: libpam/pam_strerror.c:78
+msgid "Unknown PAM error"
+msgstr "Ismeretlen PAM-hiba"
+
+#: libpam_misc/misc_conv.c:35
+msgid "..\a.Time is running out...\n"
+msgstr "..\a.Kifut az időből...\n"
+
+#: libpam_misc/misc_conv.c:36
+msgid "..\a.Sorry, your time is up!\n"
+msgstr "..\a.Elnézést, de az idő lejárt!\n"
+
+#: libpam_misc/misc_conv.c:334
+#, c-format
+msgid "erroneous conversation (%d)\n"
+msgstr "hibás beszélgetés (%d)\n"
--- /dev/null
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
--- /dev/null
+# translation of Linux-PAM.po to
+# This file is distributed under the same license as the PACKAGE package.
+# Copyright (C) YEAR Linux-PAM Project.
+# Olav Pettershagen <olav.pet@online.no>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Linux-PAM\n"
+"Report-Msgid-Bugs-To: http://sourceforge.net/projects/pam\n"
+"POT-Creation-Date: 2005-08-18 14:53+0200\n"
+"PO-Revision-Date: 2005-08-13 22:44+0200\n"
+"Last-Translator: Olav Pettershagen <olav.pet@online.no>\n"
+"Language-Team: <nb@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10.2\n"
+
+#: modules/pam_tally/pam_tally.c:730
+msgid "Authentication error"
+msgstr "Autentiseringsfeil"
+
+#: modules/pam_tally/pam_tally.c:731
+msgid "Service error"
+msgstr "Tjenestefeil"
+
+#: modules/pam_tally/pam_tally.c:732
+msgid "Unknown user"
+msgstr "Ukjent bruker"
+
+#: modules/pam_tally/pam_tally.c:733
+msgid "Unknown error"
+msgstr "Ukjent feil"
+
+#: modules/pam_tally/pam_tally.c:747
+#, c-format
+msgid "%s: Bad number given to --reset=\n"
+msgstr "%s: Ugyldig tall angitt for --reset=\n"
+
+#: modules/pam_tally/pam_tally.c:751
+#, c-format
+msgid "%s: Unrecognised option %s\n"
+msgstr "%s: Ukjent valg %s\n"
+
+#: modules/pam_tally/pam_tally.c:763
+#, c-format
+msgid ""
+"%s: [--file rooted-filename] [--user username] [--reset[=n]] [--quiet]\n"
+msgstr ""
+"%s: [--file rooted-filnavn] [--user brukernavn] [--reset[=n]] [--quiet]\n"
+
+#: modules/pam_tally/pam_tally.c:836
+#, c-format
+msgid "%s: Can't reset all users to non-zero\n"
+msgstr "%s: Kan ikke tilbakestille alle brukere til non-zero\n"
+
+#: modules/pam_selinux/pam_selinux.c:129
+#, c-format
+msgid "Your default context is %s. \n"
+msgstr "Din standardkontekst er %s. \n"
+
+#: modules/pam_selinux/pam_selinux.c:132
+msgid "Do you want to choose a different one? [n]"
+msgstr "Vil du velge en annen? [n]"
+
+#: modules/pam_selinux/pam_selinux.c:139
+msgid "Enter number of choice: "
+msgstr "Angi et tall: "
+
+#: modules/pam_selinux/pam_selinux.c:191
+msgid "Would you like to enter a security context? [y] "
+msgstr "Vil du angi en sikkerhetskontekst? [y] "
+
+#: modules/pam_selinux/pam_selinux.c:208
+msgid "role: "
+msgstr "rolle: "
+
+#: modules/pam_selinux/pam_selinux.c:216
+msgid "type: "
+msgstr "type: "
+
+#: modules/pam_selinux/pam_selinux.c:226
+msgid "level: "
+msgstr "nivå: "
+
+#: modules/pam_selinux/pam_selinux.c:240
+msgid "Not a valid security context"
+msgstr "Ikke en gyldig sikkerhetskontekst"
+
+#: modules/pam_selinux/pam_selinux.c:475
+#, c-format
+msgid "Security Context %s Assigned"
+msgstr "Sikkerhetskontekst %s tilordnet"
+
+#: modules/pam_selinux/pam_selinux.c:595
+#, c-format
+msgid "failed to initialize PAM\n"
+msgstr "kunne ikke initialisere PAM\n"
+
+#: modules/pam_selinux/pam_selinux.c:601
+#, c-format
+msgid "failed to pam_set_item()\n"
+msgstr "kunne ikke pam_set_item()\n"
+
+#: modules/pam_selinux/pam_selinux.c:626
+#, c-format
+msgid "login: failure forking: %s"
+msgstr "login: feil under forgrening: %s"
+
+#: modules/pam_unix/pam_unix_acct.c:268 modules/pam_unix/pam_unix_acct.c:295
+msgid "Your account has expired; please contact your system administrator"
+msgstr "Din konto er utløpt; kontakt systemadministratoren"
+
+#: modules/pam_unix/pam_unix_acct.c:277
+msgid "You are required to change your password immediately (root enforced)"
+msgstr "Du må straks endre passordet ditt (ordre fra rot)"
+
+#: modules/pam_unix/pam_unix_acct.c:304
+msgid "You are required to change your password immediately (password aged)"
+msgstr "Du må straks endre passordet ditt (passord for gammelt)"
+
+#: modules/pam_unix/pam_unix_acct.c:314
+#, c-format
+msgid "Warning: your password will expire in %d day%.2s"
+msgstr "Advarsel: passordet ditt vil utløpe om %d dager%.2s"
+
+#: modules/pam_unix/pam_unix_passwd.c:818
+msgid "NIS password could not be changed."
+msgstr "NIS-passord kunne ikke endres."
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "No password supplied"
+msgstr "Passord ikke angitt"
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "Password unchanged"
+msgstr "Passord uendret"
+
+#: modules/pam_unix/pam_unix_passwd.c:983
+msgid "You must choose a longer password"
+msgstr "Du må velge et lengre passord"
+
+#: modules/pam_unix/pam_unix_passwd.c:988
+msgid "Password has been already used. Choose another."
+msgstr "Passordet er allerede benyttet. Velg et annet."
+
+#: modules/pam_unix/pam_unix_passwd.c:1147
+msgid "You must wait longer to change your password"
+msgstr "Du må vente lenger før du kan endre passordet"
+
+#: modules/pam_stress/pam_stress.c:481
+msgid "Changing STRESS password for "
+msgstr "Endrer STRESS-passord for "
+
+#: modules/pam_stress/pam_stress.c:495
+msgid "Enter new STRESS password: "
+msgstr "Angi nytt STRESS-passord: "
+
+#: modules/pam_stress/pam_stress.c:498
+msgid "Retype new STRESS password: "
+msgstr "Bekreft nytt STRESS-passord: "
+
+#: modules/pam_stress/pam_stress.c:526
+msgid "Verification mis-typed; password unchanged"
+msgstr "Bekreftelse feil skrevet; passord uendret"
+
+#: libpam/pam_strerror.c:13
+msgid "Success"
+msgstr "Utført"
+
+#: libpam/pam_strerror.c:15
+msgid "Critical error - immediate abort"
+msgstr "Kritisk feil - avbryter straks"
+
+#: libpam/pam_strerror.c:17
+msgid "dlopen() failure"
+msgstr "dlopen()-feil"
+
+#: libpam/pam_strerror.c:19
+msgid "Symbol not found"
+msgstr "Symbol ikke funnet"
+
+#: libpam/pam_strerror.c:21
+msgid "Error in service module"
+msgstr "Feil i tjenestemodul"
+
+#: libpam/pam_strerror.c:23
+msgid "System error"
+msgstr "Systemfeil"
+
+#: libpam/pam_strerror.c:25
+msgid "Memory buffer error"
+msgstr "Minnebufferfeil"
+
+#: libpam/pam_strerror.c:27
+msgid "Permission denied"
+msgstr "Tillatelse avvist"
+
+#: libpam/pam_strerror.c:29
+msgid "Authentication failure"
+msgstr "Autentiseringsfeil"
+
+#: libpam/pam_strerror.c:31
+msgid "Insufficient credentials to access authentication data"
+msgstr "Utilstrekkelige rettigheter for tilgang til autentiseringsinformasjon"
+
+#: libpam/pam_strerror.c:33
+msgid "Authentication service cannot retrieve authentication info."
+msgstr "Autentiseringstjenesten kan ikke hente autentiseringsinformasjon."
+
+#: libpam/pam_strerror.c:35
+msgid "User not known to the underlying authentication module"
+msgstr "Bruker ukjent for autentiseringsmodul"
+
+#: libpam/pam_strerror.c:37
+msgid "Have exhausted maximum number of retries for service."
+msgstr "Maksimalt antall forsøk er overskredet for tjenesten."
+
+#: libpam/pam_strerror.c:39
+msgid "Authentication token is no longer valid; new one required."
+msgstr "Autentiseringsjide ikke lenger gyldig; ny kode kreves."
+
+#: libpam/pam_strerror.c:41
+msgid "User account has expired"
+msgstr "Brukerkonto er utløpt"
+
+#: libpam/pam_strerror.c:43
+msgid "Cannot make/remove an entry for the specified session"
+msgstr "Kan ikke opprette/fjerne en oppføring for den valgte økten"
+
+#: libpam/pam_strerror.c:45
+msgid "Authentication service cannot retrieve user credentials"
+msgstr "Autentiseringstjenesten kan ikke hente brukerrettigheter"
+
+#: libpam/pam_strerror.c:47
+msgid "User credentials expired"
+msgstr "Brukerrettigheter utløpt"
+
+#: libpam/pam_strerror.c:49
+msgid "Failure setting user credentials"
+msgstr "Feil under definisjon av brukerrettigheter"
+
+#: libpam/pam_strerror.c:51
+msgid "No module specific data is present"
+msgstr "Nei modulspesifikk informasjon finnes"
+
+#: libpam/pam_strerror.c:53
+msgid "Bad item passed to pam_*_item()"
+msgstr "Ugyldig oppføring angitt for pam_*_item()"
+
+#: libpam/pam_strerror.c:55
+msgid "Conversation error"
+msgstr "Dialogfeil"
+
+#: libpam/pam_strerror.c:57
+msgid "Authentication token manipulation error"
+msgstr "Manipulasjonsfeil for autentiseringskode"
+
+#: libpam/pam_strerror.c:59
+msgid "Authentication information cannot be recovered"
+msgstr "Autentiseringsinformasjon kan ikke gjenopprettes"
+
+#: libpam/pam_strerror.c:61
+msgid "Authentication token lock busy"
+msgstr "Låsing av autentiseringskode opptatt"
+
+#: libpam/pam_strerror.c:63
+msgid "Authentication token aging disabled"
+msgstr "Tidsbegrensning av autentiseringskode deaktivert"
+
+#: libpam/pam_strerror.c:65
+msgid "Failed preliminary check by password service"
+msgstr "Passordtjenestens innledende kontroll mislyktes"
+
+#: libpam/pam_strerror.c:67
+msgid "The return value should be ignored by PAM dispatch"
+msgstr "Resultatverdien bør ignoreres av PAM"
+
+#: libpam/pam_strerror.c:69
+msgid "Module is unknown"
+msgstr "Modulen er ukjent"
+
+#: libpam/pam_strerror.c:71
+msgid "Authentication token expired"
+msgstr "Autentiseringskode utløpt"
+
+#: libpam/pam_strerror.c:73
+msgid "Conversation is waiting for event"
+msgstr "Dialogen venter på hendelse"
+
+#: libpam/pam_strerror.c:75
+msgid "Application needs to call libpam again"
+msgstr "Programmet må spørre libpam på nytt"
+
+#: libpam/pam_strerror.c:78
+msgid "Unknown PAM error"
+msgstr "Ukjent PAM-feil"
+
+#: libpam_misc/misc_conv.c:35
+#, fuzzy
+msgid "..\a.Time is running out...\n"
+msgstr "...Tiden er i ferd med utløpe..\n"
+
+#: libpam_misc/misc_conv.c:36
+#, fuzzy
+msgid "..\a.Sorry, your time is up!\n"
+msgstr "...Beklager, tiden er utløpt!\n"
+
+#: libpam_misc/misc_conv.c:334
+#, c-format
+msgid "erroneous conversation (%d)\n"
+msgstr "mislykket dialog (%d)\n"
--- /dev/null
+# translation of Linux-PAM.pa.po to Panjabi
+# translation of Linux-PAM.po to Panjabi
+# This file is distributed under the same license as the PACKAGE package.
+# Copyright (C) YEAR Linux-PAM Project.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+# Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Linux-PAM.pa\n"
+"Report-Msgid-Bugs-To: http://sourceforge.net/projects/pam\n"
+"POT-Creation-Date: 2005-08-18 14:53+0200\n"
+"PO-Revision-Date: 2005-08-06 08:34+0530\n"
+"Last-Translator: Amanpreet Singh Alam[ਆਲਮ] <amanpreetalam@yahoo.com>\n"
+"Language-Team: Panjabi <pa@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.9.1\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: modules/pam_tally/pam_tally.c:730
+msgid "Authentication error"
+msgstr "ਪਰਮਾਣਕਿਤਾ ਗਲਤੀ"
+
+#: modules/pam_tally/pam_tally.c:731
+msgid "Service error"
+msgstr "ਸੇਵਾ ਗਲਤੀ"
+
+#: modules/pam_tally/pam_tally.c:732
+msgid "Unknown user"
+msgstr "ਅਣਜਾਣ ਉਪਭੋਗੀ"
+
+#: modules/pam_tally/pam_tally.c:733
+msgid "Unknown error"
+msgstr "ਅਣਜਾਣੀ ਗਲਤੀ"
+
+#: modules/pam_tally/pam_tally.c:747
+#, c-format
+msgid "%s: Bad number given to --reset=\n"
+msgstr "%s: --reset= ਲਈ ਗਲਤ ਨੰਬਰ ਦਿੱਤਾ ਗਿਆ\n"
+
+#: modules/pam_tally/pam_tally.c:751
+#, c-format
+msgid "%s: Unrecognised option %s\n"
+msgstr "%s: ਬੇਪਛਾਣ ਚੋਣ %s\n"
+
+#: modules/pam_tally/pam_tally.c:763
+#, c-format
+msgid ""
+"%s: [--file rooted-filename] [--user username] [--reset[=n]] [--quiet]\n"
+msgstr ""
+"%s: [--file rooted-filename] [--user username] [--reset[=n]] [--quiet]\n"
+
+#: modules/pam_tally/pam_tally.c:836
+#, c-format
+msgid "%s: Can't reset all users to non-zero\n"
+msgstr ""
+
+#: modules/pam_selinux/pam_selinux.c:129
+#, c-format
+msgid "Your default context is %s. \n"
+msgstr "ਤੁਹਾਡਾ ਮੁੱਲ ਪਰਸੰਗ %s ਹੈ \n"
+
+#: modules/pam_selinux/pam_selinux.c:132
+msgid "Do you want to choose a different one? [n]"
+msgstr "ਕੀ ਤੁਸੀਂ ਵੱਖਰੇ ਦੀ ਚੋਣ ਕਰਨੀ ਚਾਹੁੰਦੇ ਹੋ? [n]"
+
+#: modules/pam_selinux/pam_selinux.c:139
+msgid "Enter number of choice: "
+msgstr "ਚੋਣ ਦਾ ਨੰਬਰ ਦਿਓ: "
+
+#: modules/pam_selinux/pam_selinux.c:191
+msgid "Would you like to enter a security context? [y] "
+msgstr "ਕੀ ਤੁਸੀਂ ਇੱਕ ਸੁਰੱਖਿਆ ਪਰਸੰਗ ਦੇਣਾ ਚਾਹੁੰਦੇ ਹੋ? [y] "
+
+#: modules/pam_selinux/pam_selinux.c:208
+msgid "role: "
+msgstr "ਰੋਲ: "
+
+#: modules/pam_selinux/pam_selinux.c:216
+msgid "type: "
+msgstr "ਕਿਸਮ: "
+
+#: modules/pam_selinux/pam_selinux.c:226
+msgid "level: "
+msgstr "ਪੱਧਰ: "
+
+#: modules/pam_selinux/pam_selinux.c:240
+msgid "Not a valid security context"
+msgstr "ਇੱਕ ਠੀਕ ਸੁਰੱਖਿਆ ਪਰਸੰਗ ਨਹੀਂ"
+
+#: modules/pam_selinux/pam_selinux.c:475
+#, c-format
+msgid "Security Context %s Assigned"
+msgstr ""
+
+#: modules/pam_selinux/pam_selinux.c:595
+#, c-format
+msgid "failed to initialize PAM\n"
+msgstr "PAM ਸ਼ੁਰੂ ਕਰਨ ਲਈ ਫੇਲ\n"
+
+#: modules/pam_selinux/pam_selinux.c:601
+#, c-format
+msgid "failed to pam_set_item()\n"
+msgstr "pam_set_item() ਲਈ ਫੇਲ\n"
+
+#: modules/pam_selinux/pam_selinux.c:626
+#, c-format
+msgid "login: failure forking: %s"
+msgstr ""
+
+#: modules/pam_unix/pam_unix_acct.c:268 modules/pam_unix/pam_unix_acct.c:295
+msgid "Your account has expired; please contact your system administrator"
+msgstr ""
+
+#: modules/pam_unix/pam_unix_acct.c:277
+msgid "You are required to change your password immediately (root enforced)"
+msgstr ""
+
+#: modules/pam_unix/pam_unix_acct.c:304
+msgid "You are required to change your password immediately (password aged)"
+msgstr ""
+
+#: modules/pam_unix/pam_unix_acct.c:314
+#, c-format
+msgid "Warning: your password will expire in %d day%.2s"
+msgstr "ਸਾਵਧਾਨ: ਤੁਹਾਡਾ ਗੁਪਤ-ਕੋਡ ਦੀ ਮਿਆਦ %d ਦਿਨ%.2s 'ਚ ਪੁੱਗ ਜਾਵੇਗੀ।"
+
+#: modules/pam_unix/pam_unix_passwd.c:818
+msgid "NIS password could not be changed."
+msgstr "NIS ਗੁਪਤ-ਕੋਡ ਤਬਦੀਲ ਨਹੀਂ ਕੀਤਾ ਜਾ ਸਕਿਆ ਹੈ।"
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "No password supplied"
+msgstr "ਕੋਈ ਗੁਪਤ-ਕੋਡ ਨਹੀਂ ਦਿੱਤਾ ਗਿਆ"
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "Password unchanged"
+msgstr "ਗੁਪਤ-ਕੋਡ ਨਾ-ਤਬਦੀਲ ਹੈ"
+
+#: modules/pam_unix/pam_unix_passwd.c:983
+msgid "You must choose a longer password"
+msgstr "ਤੁਹਾਨੂੰ ਲੰਮੇ ਗੁਪਤ-ਕੋਡ ਦੀ ਚੋਣ ਕਰਨੀ ਚਾਹੀਦੀ ਹੈ"
+
+#: modules/pam_unix/pam_unix_passwd.c:988
+msgid "Password has been already used. Choose another."
+msgstr "ਗੁਪਤ-ਕੋਡ ਪਹਿਲਾਂ ਵੀ ਵਰਤਿਆ ਗਿਆ ਹੈ। ਵੱਖਰਾ ਚੁਣੋ।"
+
+#: modules/pam_unix/pam_unix_passwd.c:1147
+msgid "You must wait longer to change your password"
+msgstr ""
+
+#: modules/pam_stress/pam_stress.c:481
+msgid "Changing STRESS password for "
+msgstr ""
+
+#: modules/pam_stress/pam_stress.c:495
+msgid "Enter new STRESS password: "
+msgstr "ਨਵਾਂ STRESS ਗੁਪਤ-ਕੋਡ ਦਿਓ: "
+
+#: modules/pam_stress/pam_stress.c:498
+msgid "Retype new STRESS password: "
+msgstr "ਨਵਾਂ STRESS ਗੁਪਤ-ਕੋਡ ਮੁੜ-ਲਿਖੋ: "
+
+#: modules/pam_stress/pam_stress.c:526
+msgid "Verification mis-typed; password unchanged"
+msgstr ""
+
+#: libpam/pam_strerror.c:13
+msgid "Success"
+msgstr "ਸਫ਼ਲ"
+
+#: libpam/pam_strerror.c:15
+msgid "Critical error - immediate abort"
+msgstr "ਨਾਜ਼ੁਕ ਗਲਤੀ - ਤਰੁੰਤ ਅਧੂਰਾ ਛੱਡਿਆ"
+
+#: libpam/pam_strerror.c:17
+msgid "dlopen() failure"
+msgstr "dlopen() ਫੇਲ"
+
+#: libpam/pam_strerror.c:19
+msgid "Symbol not found"
+msgstr "ਨਿਸ਼ਾਨ ਨਹੀਂ ਮਿਲਿਆ"
+
+#: libpam/pam_strerror.c:21
+msgid "Error in service module"
+msgstr "ਸੇਵਾ ਮੈਡੀਊਲ ਵਿੱਚ ਗਲਤੀ"
+
+#: libpam/pam_strerror.c:23
+msgid "System error"
+msgstr "ਸਿਸਟਮ ਗਲਤੀ"
+
+#: libpam/pam_strerror.c:25
+msgid "Memory buffer error"
+msgstr "ਮੈਮੋਰੀ ਬਫ਼ਰ ਗਲਤੀ"
+
+#: libpam/pam_strerror.c:27
+msgid "Permission denied"
+msgstr "ਅਧਿਕਾਰ ਪਾਬੰਦੀ"
+
+#: libpam/pam_strerror.c:29
+msgid "Authentication failure"
+msgstr "ਪਰਮਾਣਕਿਤਾ ਫੇਲ"
+
+#: libpam/pam_strerror.c:31
+msgid "Insufficient credentials to access authentication data"
+msgstr ""
+
+#: libpam/pam_strerror.c:33
+msgid "Authentication service cannot retrieve authentication info."
+msgstr ""
+
+#: libpam/pam_strerror.c:35
+msgid "User not known to the underlying authentication module"
+msgstr ""
+
+#: libpam/pam_strerror.c:37
+msgid "Have exhausted maximum number of retries for service."
+msgstr ""
+
+#: libpam/pam_strerror.c:39
+msgid "Authentication token is no longer valid; new one required."
+msgstr ""
+
+#: libpam/pam_strerror.c:41
+msgid "User account has expired"
+msgstr "ਉਪਭੋਗੀ ਖਾਤੇ ਦੀ ਮਿਆਦ ਪੁੱਗ ਚੁੱਕੀ ਹੈ"
+
+#: libpam/pam_strerror.c:43
+msgid "Cannot make/remove an entry for the specified session"
+msgstr ""
+
+#: libpam/pam_strerror.c:45
+msgid "Authentication service cannot retrieve user credentials"
+msgstr ""
+
+#: libpam/pam_strerror.c:47
+msgid "User credentials expired"
+msgstr ""
+
+#: libpam/pam_strerror.c:49
+msgid "Failure setting user credentials"
+msgstr ""
+
+#: libpam/pam_strerror.c:51
+msgid "No module specific data is present"
+msgstr ""
+
+#: libpam/pam_strerror.c:53
+msgid "Bad item passed to pam_*_item()"
+msgstr ""
+
+#: libpam/pam_strerror.c:55
+msgid "Conversation error"
+msgstr "ਤਬਦੀਲੀ ਗਲਤੀ"
+
+#: libpam/pam_strerror.c:57
+msgid "Authentication token manipulation error"
+msgstr ""
+
+#: libpam/pam_strerror.c:59
+msgid "Authentication information cannot be recovered"
+msgstr ""
+
+#: libpam/pam_strerror.c:61
+msgid "Authentication token lock busy"
+msgstr ""
+
+#: libpam/pam_strerror.c:63
+msgid "Authentication token aging disabled"
+msgstr ""
+
+#: libpam/pam_strerror.c:65
+msgid "Failed preliminary check by password service"
+msgstr ""
+
+#: libpam/pam_strerror.c:67
+msgid "The return value should be ignored by PAM dispatch"
+msgstr ""
+
+#: libpam/pam_strerror.c:69
+msgid "Module is unknown"
+msgstr "ਮੈਡੀਊਲ ਅਣਜਾਣ ਹੈ"
+
+#: libpam/pam_strerror.c:71
+msgid "Authentication token expired"
+msgstr "ਪਰਮਾਣਕਿਤਾ ਟੋਕਨ ਦੀ ਮਿਆਦ ਪੁੱਗ ਚੁੱਕੀ ਹੈ"
+
+#: libpam/pam_strerror.c:73
+msgid "Conversation is waiting for event"
+msgstr ""
+
+#: libpam/pam_strerror.c:75
+msgid "Application needs to call libpam again"
+msgstr ""
+
+#: libpam/pam_strerror.c:78
+msgid "Unknown PAM error"
+msgstr "ਅਣਜਾਣ PAM ਗਲਤੀ"
+
+#: libpam_misc/misc_conv.c:35
+msgid "..\a.Time is running out...\n"
+msgstr "..\a.ਸਮਾਂ ਸਮਾਪਤ ਹੋ ਰਿਹਾ ਹੈ...\n"
+
+#: libpam_misc/misc_conv.c:36
+msgid "..\a.Sorry, your time is up!\n"
+msgstr "..\a.ਅਫ਼ਸੋਸ, ਤੁਹਾਡਾ ਸਮਾਂ ਸਮਾਪਤ ਹੋ ਗਿਆ ਹੈ!\n"
+
+#: libpam_misc/misc_conv.c:334
+#, c-format
+msgid "erroneous conversation (%d)\n"
+msgstr ""
--- /dev/null
+# translation of Linux-PAM-pt.po to portuguese
+# This file is distributed under the same license as the PACKAGE package.
+# Copyright (C) YEAR Linux-PAM Project.
+# Antonio Cardoso Martins <digiplan@netvisao.pt>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Linux-PAM-pt\n"
+"Report-Msgid-Bugs-To: http://sourceforge.net/projects/pam\n"
+"POT-Creation-Date: 2005-08-18 14:53+0200\n"
+"PO-Revision-Date: 2005-08-07 00:41+0100\n"
+"Last-Translator: Antonio Cardoso Martins <digiplan@netvisao.pt>\n"
+"Language-Team: portuguese\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: KBabel 1.10\n"
+
+#: modules/pam_tally/pam_tally.c:730
+msgid "Authentication error"
+msgstr "Erro de autenticação"
+
+#: modules/pam_tally/pam_tally.c:731
+msgid "Service error"
+msgstr "Erro de serviço"
+
+#: modules/pam_tally/pam_tally.c:732
+msgid "Unknown user"
+msgstr "Utilizador desconhecido"
+
+#: modules/pam_tally/pam_tally.c:733
+msgid "Unknown error"
+msgstr "Erro desconhecido"
+
+#: modules/pam_tally/pam_tally.c:747
+#, c-format
+msgid "%s: Bad number given to --reset=\n"
+msgstr "%s: Número errado fornecido a --reset=\n"
+
+#: modules/pam_tally/pam_tally.c:751
+#, c-format
+msgid "%s: Unrecognised option %s\n"
+msgstr "%s: Opção não reconhecida %s\n"
+
+#: modules/pam_tally/pam_tally.c:763
+#, c-format
+msgid ""
+"%s: [--file rooted-filename] [--user username] [--reset[=n]] [--quiet]\n"
+msgstr ""
+"%s: [--file ficheiro-raiz] [--user nome-utilizador] [--reset[=n]] [--quiet]\n"
+
+#: modules/pam_tally/pam_tally.c:836
+#, c-format
+msgid "%s: Can't reset all users to non-zero\n"
+msgstr "%s: Não foi possível reiniciar todos os utilizadores para não zero\n"
+
+#: modules/pam_selinux/pam_selinux.c:129
+#, c-format
+msgid "Your default context is %s. \n"
+msgstr "O seu contexto pré-definido é %s: \n"
+
+#: modules/pam_selinux/pam_selinux.c:132
+msgid "Do you want to choose a different one? [n]"
+msgstr "Pretende escolher um diferente? [n]"
+
+#: modules/pam_selinux/pam_selinux.c:139
+msgid "Enter number of choice: "
+msgstr "Digite o número da escolha: "
+
+#: modules/pam_selinux/pam_selinux.c:191
+msgid "Would you like to enter a security context? [y] "
+msgstr "Pretende introduzir um contexto de segurança? [y]"
+
+#: modules/pam_selinux/pam_selinux.c:208
+msgid "role: "
+msgstr "papel: "
+
+#: modules/pam_selinux/pam_selinux.c:216
+msgid "type: "
+msgstr "tipo: "
+
+#: modules/pam_selinux/pam_selinux.c:226
+msgid "level: "
+msgstr "nível: "
+
+#: modules/pam_selinux/pam_selinux.c:240
+msgid "Not a valid security context"
+msgstr "Não é um contexto de segurança válido"
+
+#: modules/pam_selinux/pam_selinux.c:475
+#, c-format
+msgid "Security Context %s Assigned"
+msgstr "Contexto de Segurança %s Atribuído"
+
+#: modules/pam_selinux/pam_selinux.c:595
+#, c-format
+msgid "failed to initialize PAM\n"
+msgstr "falha ao inicializar o PAM\n"
+
+#: modules/pam_selinux/pam_selinux.c:601
+#, c-format
+msgid "failed to pam_set_item()\n"
+msgstr "falha em pam_set_item()\n"
+
+#: modules/pam_selinux/pam_selinux.c:626
+#, c-format
+msgid "login: failure forking: %s"
+msgstr "sessão: falha ao executar o forking: %s"
+
+#: modules/pam_unix/pam_unix_acct.c:268 modules/pam_unix/pam_unix_acct.c:295
+msgid "Your account has expired; please contact your system administrator"
+msgstr ""
+"A sua conta de utilizador expirou; por favor contacte o seu administrador de "
+"sistema"
+
+#: modules/pam_unix/pam_unix_acct.c:277
+msgid "You are required to change your password immediately (root enforced)"
+msgstr ""
+"É obrigatório que altere de imediato a sua palavra passe (forçado pelo root)"
+
+#: modules/pam_unix/pam_unix_acct.c:304
+msgid "You are required to change your password immediately (password aged)"
+msgstr ""
+"É obrigatório que altere de imediato a sua palavra passe (forçado pela idade)"
+
+#: modules/pam_unix/pam_unix_acct.c:314
+#, c-format
+msgid "Warning: your password will expire in %d day%.2s"
+msgstr "Aviso: a sua palavra passe expira em %d dia%.2s"
+
+#: modules/pam_unix/pam_unix_passwd.c:818
+msgid "NIS password could not be changed."
+msgstr "A palavra passe de NIS não pode ser alterada."
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "No password supplied"
+msgstr "Não foi fornecida uma palavra passe"
+
+#: modules/pam_unix/pam_unix_passwd.c:962
+msgid "Password unchanged"
+msgstr "Palavra passe inalterada"
+
+#: modules/pam_unix/pam_unix_passwd.c:983
+msgid "You must choose a longer password"
+msgstr "Deve escolher uma palavra passe mais longa"
+
+#: modules/pam_unix/pam_unix_passwd.c:988
+msgid "Password has been already used. Choose another."
+msgstr "A palavra passe já foi anteriormente utilizada. Escolha outra."
+
+#: modules/pam_unix/pam_unix_passwd.c:1147
+msgid "You must wait longer to change your password"
+msgstr "Tem de esperar mais antes de poder alterar a sua palavra passe"
+
+#: modules/pam_stress/pam_stress.c:481
+msgid "Changing STRESS password for "
+msgstr "A alterar a palavra passe de STRESS para "
+
+#: modules/pam_stress/pam_stress.c:495
+msgid "Enter new STRESS password: "
+msgstr "Digite a nova palavra passe de STRESS: "
+
+#: modules/pam_stress/pam_stress.c:498
+msgid "Retype new STRESS password: "
+msgstr "Digite novamente a nova palavra passe de STRESS: "
+
+#: modules/pam_stress/pam_stress.c:526
+msgid "Verification mis-typed; password unchanged"
+msgstr "A verificação não coincide; palavra passe inalterada"
+
+#: libpam/pam_strerror.c:13
+msgid "Success"
+msgstr "Sucesso"
+
+#: libpam/pam_strerror.c:15
+msgid "Critical error - immediate abort"
+msgstr "Erro crítico - interrupção imediata"
+
+#: libpam/pam_strerror.c:17
+msgid "dlopen() failure"
+msgstr "falha em dlopen()"
+
+#: libpam/pam_strerror.c:19
+msgid "Symbol not found"
+msgstr "Símbolo não encontrado"
+
+#: libpam/pam_strerror.c:21
+msgid "Error in service module"
+msgstr "Erro no módulo do serviço"
+
+#: libpam/pam_strerror.c:23
+msgid "System error"
+msgstr "Erro de sistema"
+
+#: libpam/pam_strerror.c:25
+msgid "Memory buffer error"
+msgstr "Erro de buffer de memória"
+
+#: libpam/pam_strerror.c:27
+msgid "Permission denied"
+msgstr "Permissão negada"
+
+#: libpam/pam_strerror.c:29
+msgid "Authentication failure"
+msgstr "Falha de autenticação"
+
+#: libpam/pam_strerror.c:31
+msgid "Insufficient credentials to access authentication data"
+msgstr "Credenciais insuficientes para aceder aos dados de autenticação"
+
+#: libpam/pam_strerror.c:33
+msgid "Authentication service cannot retrieve authentication info."
+msgstr "O serviço de autenticação não pode obter informação de autenticação."
+
+#: libpam/pam_strerror.c:35
+msgid "User not known to the underlying authentication module"
+msgstr "Utilizador desconhecido para o módulo de autenticação subjacente"
+
+#: libpam/pam_strerror.c:37
+msgid "Have exhausted maximum number of retries for service."
+msgstr "Esgotou o número máximo de tentativas para o serviço."
+
+#: libpam/pam_strerror.c:39
+msgid "Authentication token is no longer valid; new one required."
+msgstr "O testemunho de autenticação já não é válido; é necessário um novo."
+
+#: libpam/pam_strerror.c:41
+msgid "User account has expired"
+msgstr "A conta de utilizador expirou"
+
+#: libpam/pam_strerror.c:43
+msgid "Cannot make/remove an entry for the specified session"
+msgstr "Não é possível criar/remover uma entrada para a sessão especificada"
+
+#: libpam/pam_strerror.c:45
+msgid "Authentication service cannot retrieve user credentials"
+msgstr ""
+"O serviço de autenticação não consegue obter as credenciais do utilizador"
+
+#: libpam/pam_strerror.c:47
+msgid "User credentials expired"
+msgstr "As credenciais do utilizador expiraram"
+
+#: libpam/pam_strerror.c:49
+msgid "Failure setting user credentials"
+msgstr "Falha na definição das credenciais do utilizador"
+
+#: libpam/pam_strerror.c:51
+msgid "No module specific data is present"
+msgstr "Não está presente os dados específicos do módulo"
+
+#: libpam/pam_strerror.c:53
+msgid "Bad item passed to pam_*_item()"
+msgstr "Item incorrecto passado para pam_*_item()"
+
+#: libpam/pam_strerror.c:55
+msgid "Conversation error"
+msgstr "Erro de conversação"
+
+#: libpam/pam_strerror.c:57
+msgid "Authentication token manipulation error"
+msgstr "Erro de manipulação do testemunho de autenticação"
+
+#: libpam/pam_strerror.c:59
+msgid "Authentication information cannot be recovered"
+msgstr "A informação de autenticação não pode ser recuperada"
+
+#: libpam/pam_strerror.c:61
+msgid "Authentication token lock busy"
+msgstr "A fechadura to testemunho de autenticação encontra-se ocupado"
+
+#: libpam/pam_strerror.c:63
+msgid "Authentication token aging disabled"
+msgstr "O envelhecimento do testemunho de autenticação encontra-se desactivado"
+
+#: libpam/pam_strerror.c:65
+msgid "Failed preliminary check by password service"
+msgstr "Falha na validação preliminar pelo serviço de palavra passe"
+
+#: libpam/pam_strerror.c:67
+msgid "The return value should be ignored by PAM dispatch"
+msgstr "O valor de retorno deve ser ignorado pelo expedidor de PAM"
+
+#: libpam/pam_strerror.c:69
+msgid "Module is unknown"
+msgstr "O módulo é desconhecido"
+
+#: libpam/pam_strerror.c:71
+msgid "Authentication token expired"
+msgstr "O testemunho de autenticação expirou"
+
+#: libpam/pam_strerror.c:73
+msgid "Conversation is waiting for event"
+msgstr "A conversação está a aguardar um evento"
+
+#: libpam/pam_strerror.c:75
+msgid "Application needs to call libpam again"
+msgstr "A aplicação necessita de invocar o libpam novamente"
+
+#: libpam/pam_strerror.c:78
+msgid "Unknown PAM error"
+msgstr "Erro PAM desconhecido"
+
+#: libpam_misc/misc_conv.c:35
+msgid "..\a.Time is running out...\n"
+msgstr "...O tempo está a esgotar-se...\n"
+
+#: libpam_misc/misc_conv.c:36
+msgid "..\a.Sorry, your time is up!\n"
+msgstr "...Lamento, o seu tempo esgotou-se!\n"
+
+#: libpam_misc/misc_conv.c:334
+#, c-format
+msgid "erroneous conversation (%d)\n"
+msgstr "conversação errónea (%d)\n"
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
--- /dev/null
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
projects / linux-pam / commitdiff