--- /dev/null
+# Universal Unix Makefile for Python extensions
+# =============================================
+
+# Short Instructions
+# ------------------
+
+# 1. Build and install Python (1.4 or newer).
+# 2. "make -f Makefile.pre.in boot"
+# 3. "make"
+# You should now have a shared library.
+
+# Long Instructions
+# -----------------
+
+# Build *and install* the basic Python 1.4 distribution. See the
+# Python README for instructions.
+
+# Create a file Setup.in for your extension. This file follows the
+# format of the Modules/Setup.in file; see the instructions there.
+# For a simple module called "spam" on file "spammodule.c", it can
+# contain a single line:
+# spam spammodule.c
+# You can build as many modules as you want in the same directory --
+# just have a separate line for each of them in the Setup.in file.
+
+# If you want to build your extension as a shared library, insert a
+# line containing just the string
+# *shared*
+# at the top of your Setup.in file.
+
+# Note that the build process copies Setup.in to Setup, and then works
+# with Setup. It doesn't overwrite Setup when Setup.in is changed, so
+# while you're in the process of debugging your Setup.in file, you may
+# want to edit Setup instead, and copy it back to Setup.in later.
+# (All this is done so you can distribute your extension easily and
+# someone else can select the modules they actually want to build by
+# commenting out lines in the Setup file, without editing the
+# original. Editing Setup is also used to specify nonstandard
+# locations for include or library files.)
+
+# Copy this file (Misc/Makefile.pre.in) to the directory containing
+# your extension.
+
+# Run "make -f Makefile.pre.in boot". This creates Makefile
+# (producing Makefile.pre and sedscript as intermediate files) and
+# config.c, incorporating the values for sys.prefix, sys.exec_prefix
+# and sys.version from the installed Python binary. For this to work,
+# the python binary must be on your path. If this fails, try
+# make -f Makefile.pre.in Makefile VERSION=1.4 installdir=<prefix>
+# where <prefix> is the prefix used to install Python for installdir
+# (and possibly similar for exec_installdir=<exec_prefix>).
+
+# If you are building your extension as a shared library (your
+# Setup.in file starts with *shared*), run "make" or "make sharedmods"
+# to build the shared library files. If you are building a statically
+# linked Python binary (the only solution of your platform doesn't
+# support shared libraries, and sometimes handy if you want to
+# distribute or install the resulting Python binary), run "make
+# python".
+
+# Note: Each time you edit Makefile.pre.in or Setup, you must run
+# "make Makefile" before running "make".
+
+# Hint: if you want to use VPATH, you can start in an empty
+# subdirectory and say (e.g.):
+# make -f ../Makefile.pre.in boot srcdir=.. VPATH=..
+
+
+# === Bootstrap variables (edited through "make boot") ===
+
+# The prefix used by "make inclinstall libainstall" of core python
+installdir= /usr/local
+
+# The exec_prefix used by the same
+exec_installdir=$(installdir)
+
+# Source directory and VPATH in case you want to use VPATH.
+# (You will have to edit these two lines yourself -- there is no
+# automatic support as the Makefile is not generated by
+# config.status.)
+srcdir= .
+VPATH= .
+
+# === Variables that you may want to customize (rarely) ===
+
+# Add more -I and -D options here
+CFLAGS= $(OPT) -I$(INCLUDEPY) -I$(LIBPL) $(DEFS)
+
+# These two variables can be set in Setup to merge extensions.
+# See example[23].
+BASELIB=
+BASESETUP=
+
+# === Variables set by makesetup ===
+
+MODOBJS= _MODOBJS_
+MODLIBS= _MODLIBS_
+
+# === Definitions added by makesetup ===
+
+# === Variables from configure (through sedscript) ===
+
+VERSION= @VERSION@
+CC= @CC@
+OPT= @OPT@
+LDFLAGS= @LDFLAGS@
+DEFS= @DEFS@
+LIBS= @LIBS@
+LIBM= @LIBM@
+LIBC= @LIBC@
+RANLIB= @RANLIB@
+MACHDEP= @MACHDEP@
+SO= @SO@
+LDSHARED= @LDSHARED@
+CCSHARED= @CCSHARED@
+LINKFORSHARED= @LINKFORSHARED@
+
+# Install prefix for architecture-independent files
+prefix= /usr/local
+
+# Install prefix for architecture-dependent files
+exec_prefix= $(prefix)
+
+# === Fixed definitions ===
+
+# Expanded directories
+BINDIR= $(exec_installdir)/bin
+LIBDIR= $(exec_prefix)/lib
+MANDIR= $(installdir)/man
+INCLUDEDIR= $(installdir)/include
+SCRIPTDIR= $(prefix)/lib
+
+# Detailed destination directories
+BINLIBDEST= $(LIBDIR)/python$(VERSION)
+LIBDEST= $(SCRIPTDIR)/python$(VERSION)
+INCLUDEPY= $(INCLUDEDIR)/python$(VERSION)
+LIBP= $(exec_installdir)/lib/python$(VERSION)
+
+LIBPL= $(LIBP)/config
+
+PYTHONLIBS= $(LIBPL)/libModules.a \
+ $(LIBPL)/libPython.a \
+ $(LIBPL)/libObjects.a \
+ $(LIBPL)/libParser.a
+
+MAKESETUP= $(LIBPL)/makesetup
+MAKEFILE= $(LIBPL)/Makefile
+CONFIGC= $(LIBPL)/config.c
+CONFIGCIN= $(LIBPL)/config.c.in
+SETUP= $(LIBPL)/Setup
+
+SYSLIBS= $(LIBM) $(LIBC)
+
+ADDOBJS= $(LIBPL)/main.o getpath.o config.o
+
+# === Fixed rules ===
+
+# Default target. This builds shared libraries only
+default: sharedmods
+
+# Build everything
+all: python sharedmods
+
+# Build shared libraries from our extension modules
+sharedmods: $(SHAREDMODS)
+
+# Build a static Python binary containing our extension modules
+python: $(ADDOBJS) lib.a $(PYTHONLIBS) Makefile $(BASELIB)
+ $(CC) $(LDFLAGS) $(ADDOBJS) lib.a $(PYTHONLIBS) \
+ $(LINKPATH) $(BASELIB) $(MODLIBS) $(LIBS) $(SYSLIBS) -o python
+
+# Build the library containing our extension modules
+lib.a: $(MODOBJS)
+ -rm -f lib.a
+ ar cr lib.a $(MODOBJS)
+ -$(RANLIB) lib.a || \
+ echo "don't worry if ranlib fails -- probably SYSV or equiv"
+
+# This runs makesetup *twice* to use the BASESETUP definition from Setup
+config.c Makefile: Makefile.pre Setup $(BASESETUP) $(MAKESETUP)
+ $(MAKESETUP) \
+ -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
+ $(MAKE) -f Makefile do-it-again
+
+# Internal target to run makesetup for the second time
+do-it-again:
+ $(MAKESETUP) \
+ -m Makefile.pre -c $(CONFIGCIN) Setup -n $(BASESETUP) $(SETUP)
+
+# Make config.o from the config.c created by makesetup
+config.o: config.c
+ $(CC) $(CFLAGS) -c config.c
+
+# Make our own private getpath.o from the installed source and our PYTHONPATH
+getpath.o: $(LIBPL)/getpath.c Makefile
+ $(CC) $(CFLAGS) -DPYTHONPATH=\"$(PYTHONPATH)\" -c $(LIBPL)/getpath.c
+
+# Setup is copied from Setup.in *only* if it doesn't yet exist
+Setup:
+ cp $(srcdir)/Setup.in Setup
+
+# Make the intermediate Makefile.pre from Makefile.pre.in
+Makefile.pre: Makefile.pre.in sedscript
+ sed -f sedscript $(srcdir)/Makefile.pre.in >Makefile.pre
+
+# Shortcuts to make the sed arguments on one line
+P=prefix
+E=exec_prefix
+H=Generated automatically from Makefile.pre.in by sedscript.
+L=LINKFORSHARED
+
+# Make the sed script used to create Makefile.pre from Makefile.pre.in
+sedscript: $(MAKEFILE)
+ sed -n \
+ -e '1s/.*/1i\\/p' \
+ -e '2s%.*%# $H%p' \
+ -e '/^VERSION=/s/^VERSION=[ ]*\(.*\)/s%@VERSION[@]%\1%/p' \
+ -e '/^CC=/s/^CC=[ ]*\(.*\)/s%@CC[@]%\1%/p' \
+ -e '/^OPT=/s/^OPT=[ ]*\(.*\)/s%@OPT[@]%\1%/p' \
+ -e '/^LDFLAGS=/s/^LDFLAGS=[ ]*\(.*\)/s%@LDFLAGS[@]%\1%/p' \
+ -e '/^DEFS=/s/^DEFS=[ ]*\(.*\)/s%@DEFS[@]%\1%/p' \
+ -e '/^LIBS=/s/^LIBS=[ ]*\(.*\)/s%@LIBS[@]%\1%/p' \
+ -e '/^LIBM=/s/^LIBM=[ ]*\(.*\)/s%@LIBM[@]%\1%/p' \
+ -e '/^LIBC=/s/^LIBC=[ ]*\(.*\)/s%@LIBC[@]%\1%/p' \
+ -e '/^RANLIB=/s/^RANLIB=[ ]*\(.*\)/s%@RANLIB[@]%\1%/p' \
+ -e '/^MACHDEP=/s/^MACHDEP=[ ]*\(.*\)/s%@MACHDEP[@]%\1%/p' \
+ -e '/^SO=/s/^SO=[ ]*\(.*\)/s%@SO[@]%\1%/p' \
+ -e '/^LDSHARED=/s/^LDSHARED=[ ]*\(.*\)/s%@LDSHARED[@]%\1%/p' \
+ -e '/^CCSHARED=/s/^CCSHARED=[ ]*\(.*\)/s%@CCSHARED[@]%\1%/p' \
+ -e '/^$L=/s/^$L=[ ]*\(.*\)/s%@$L[@]%\1%/p' \
+ -e '/^$P=/s/^$P=\(.*\)/s%^$P=.*%$P=\1%/p' \
+ -e '/^$E=/s/^$E=\(.*\)/s%^$E=.*%$E=\1%/p' \
+ $(MAKEFILE) >sedscript
+ echo "/^installdir=/s%=.*%= $(installdir)%" >>sedscript
+ echo "/^exec_installdir=/s%=.*%=$(exec_installdir)%" >>sedscript
+ echo "/^srcdir=/s%=.*%= $(srcdir)%" >>sedscript
+ echo "/^VPATH=/s%=.*%= $(VPATH)%" >>sedscript
+ echo "/^LINKPATH=/s%=.*%= $(LINKPATH)%" >>sedscript
+ echo "/^BASELIB=/s%=.*%= $(BASELIB)%" >>sedscript
+ echo "/^BASESETUP=/s%=.*%= $(BASESETUP)%" >>sedscript
+
+# Bootstrap target
+boot:
+ VERSION=`python -c "import sys; print sys.version[:3]"`; \
+ installdir=`python -c "import sys; print sys.prefix"`; \
+ exec_installdir=`python -c "import sys; print sys.exec_prefix"`; \
+ make -f Makefile.pre.in Makefile VPATH=$(VPATH) srcdir=$(srcdir) \
+ VERSION=$$VERSION \
+ installdir=$$installdir \
+ exec_installdir=$$exec_installdir
+
+# Handy target to remove intermediate files and backups
+clean:
+ -rm -f *.o *~
+
+# Handy target to remove everything that is easily regenerated
+clobber: clean
+ -rm -f *.a tags TAGS config.c Makefile.pre python sedscript
+ -rm -f *.so *.sl so_locations
+
+
+# Handy target to remove everything you don't want to distribute
+distclean: clobber
+ -rm -f Makefile Setup
projects / python / commitdiff