class DatarateOnePassCbrSvc : public ::libvpx_test::EncoderTest {
public:
explicit DatarateOnePassCbrSvc(const ::libvpx_test::CodecFactory *codec)
- : EncoderTest(codec) {}
+ : EncoderTest(codec) {
+ inter_layer_pred_mode_ = 0;
+ }
protected:
virtual ~DatarateOnePassCbrSvc() {}
encoder->Control(VP9E_SET_ROW_MT, 1);
encoder->Control(VP8E_SET_STATIC_THRESHOLD, 1);
encoder->Control(VP9E_SET_TUNE_CONTENT, tune_content_);
+ encoder->Control(VP9E_SET_SVC_INTER_LAYER_PRED, inter_layer_pred_mode_);
if (layer_framedrop_) {
vpx_svc_frame_drop_t svc_drop_frame;
int layer_framedrop_;
int force_key_;
int force_key_test_;
+ int inter_layer_pred_mode_;
};
// Params: speed setting.
}
// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and
-// 3 temporal layers. Run CIF clip with 1 thread.
-TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL3TL) {
- cfg_.rc_buf_initial_sz = 500;
- cfg_.rc_buf_optimal_sz = 500;
- cfg_.rc_buf_sz = 1000;
- cfg_.rc_min_quantizer = 0;
- cfg_.rc_max_quantizer = 63;
- cfg_.rc_end_usage = VPX_CBR;
- cfg_.g_lag_in_frames = 0;
- cfg_.ss_number_layers = 3;
- cfg_.ts_number_layers = 3;
- cfg_.ts_rate_decimator[0] = 4;
- cfg_.ts_rate_decimator[1] = 2;
- cfg_.ts_rate_decimator[2] = 1;
- cfg_.g_error_resilient = 1;
- cfg_.g_threads = 1;
- cfg_.temporal_layering_mode = 3;
- svc_params_.scaling_factor_num[0] = 72;
- svc_params_.scaling_factor_den[0] = 288;
- svc_params_.scaling_factor_num[1] = 144;
- svc_params_.scaling_factor_den[1] = 288;
- svc_params_.scaling_factor_num[2] = 288;
- svc_params_.scaling_factor_den[2] = 288;
- cfg_.rc_dropframe_thresh = 30;
- cfg_.kf_max_dist = 9999;
- number_spatial_layers_ = cfg_.ss_number_layers;
- number_temporal_layers_ = cfg_.ts_number_layers;
- ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,
- 0, 400);
- top_sl_width_ = 640;
- top_sl_height_ = 480;
- cfg_.rc_target_bitrate = 800;
- ResetModel();
- AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
- cfg_.ts_number_layers, cfg_.temporal_layering_mode,
- layer_target_avg_bandwidth_, bits_in_buffer_model_);
- ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
- CheckLayerRateTargeting(&cfg_, number_spatial_layers_,
- number_temporal_layers_, file_datarate_, 0.78, 1.15);
-#if CONFIG_VP9_DECODER
- // The non-reference frames are expected to be mismatched frames as the
- // encoder will avoid loopfilter on these frames.
- EXPECT_EQ(num_nonref_frames_, GetMismatchFrames());
-#endif
-}
-
-// Check rate targeting for 1 pass CBR SVC: 3 spatial layers and
-// 3 temporal layers, changing the target bitrate at the middle of encoding.
-TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL3TLDynamicBitrateChange) {
+// 2 temporal layers, with a change on the fly from the fixed SVC pattern to one
+// generate via SVC_SET_REF_FRAME_CONFIG. The new pattern also disables
+// inter-layer prediction.
+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL2TLDynamicPatternChange) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 3;
- cfg_.ts_number_layers = 3;
- cfg_.ts_rate_decimator[0] = 4;
- cfg_.ts_rate_decimator[1] = 2;
- cfg_.ts_rate_decimator[2] = 1;
+ cfg_.ts_number_layers = 2;
+ cfg_.ts_rate_decimator[0] = 2;
+ cfg_.ts_rate_decimator[1] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 1;
- cfg_.temporal_layering_mode = 3;
+ cfg_.temporal_layering_mode = 2;
svc_params_.scaling_factor_num[0] = 72;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 144;
cfg_.kf_max_dist = 9999;
number_spatial_layers_ = cfg_.ss_number_layers;
number_temporal_layers_ = cfg_.ts_number_layers;
+ // Change SVC pattern on the fly.
+ update_pattern_ = 1;
::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,
0, 400);
top_sl_width_ = 640;
top_sl_height_ = 480;
cfg_.rc_target_bitrate = 800;
ResetModel();
- change_bitrate_ = true;
AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode,
layer_target_avg_bandwidth_, bits_in_buffer_model_);
#endif
}
-// Check basic rate targeting for 1 pass CBR SVC: 3 spatial layers and
-// 2 temporal layers, with a change on the fly from the fixed SVC pattern to one
-// generate via SVC_SET_REF_FRAME_CONFIG. The new pattern also disables
-// inter-layer prediction.
-TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL2TLDynamicPatternChange) {
+// Check basic rate targeting for 1 pass CBR SVC with 3 spatial layers and on
+// the fly switching to 1 and then 2 and back to 3 spatial layers. This switch
+// is done by setting spatial layer bitrates to 0, and then back to non-zero,
+// during the sequence.
+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL_DisableEnableLayers) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
cfg_.ss_number_layers = 3;
- cfg_.ts_number_layers = 2;
- cfg_.ts_rate_decimator[0] = 2;
- cfg_.ts_rate_decimator[1] = 1;
+ cfg_.ts_number_layers = 1;
+ cfg_.ts_rate_decimator[0] = 1;
cfg_.g_error_resilient = 1;
cfg_.g_threads = 1;
- cfg_.temporal_layering_mode = 2;
+ cfg_.temporal_layering_mode = 0;
svc_params_.scaling_factor_num[0] = 72;
svc_params_.scaling_factor_den[0] = 288;
svc_params_.scaling_factor_num[1] = 144;
cfg_.kf_max_dist = 9999;
number_spatial_layers_ = cfg_.ss_number_layers;
number_temporal_layers_ = cfg_.ts_number_layers;
- // Change SVC pattern on the fly.
- update_pattern_ = 1;
::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,
0, 400);
top_sl_width_ = 640;
top_sl_height_ = 480;
cfg_.rc_target_bitrate = 800;
ResetModel();
+ dynamic_drop_layer_ = true;
AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
cfg_.ts_number_layers, cfg_.temporal_layering_mode,
layer_target_avg_bandwidth_, bits_in_buffer_model_);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
- CheckLayerRateTargeting(&cfg_, number_spatial_layers_,
+ // Don't check rate targeting on two top spatial layer since they will be
+ // skipped for part of the sequence.
+ CheckLayerRateTargeting(&cfg_, number_spatial_layers_ - 2,
number_temporal_layers_, file_datarate_, 0.78, 1.15);
#if CONFIG_VP9_DECODER
// The non-reference frames are expected to be mismatched frames as the
#endif
}
-// Check basic rate targeting for 1 pass CBR SVC with 3 spatial layers and on
-// the fly switching to 1 and then 2 and back to 3 spatial layers. This switch
-// is done by setting spatial layer bitrates to 0, and then back to non-zero,
-// during the sequence.
-TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL_DisableEnableLayers) {
+// Run SVC encoder for 1 temporal layer, 2 spatial layers, with spatial
+// downscale 5x5.
+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc2SL1TL5x5MultipleRuns) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
- cfg_.ss_number_layers = 3;
+ cfg_.ss_number_layers = 2;
cfg_.ts_number_layers = 1;
cfg_.ts_rate_decimator[0] = 1;
cfg_.g_error_resilient = 1;
- cfg_.g_threads = 1;
+ cfg_.g_threads = 3;
cfg_.temporal_layering_mode = 0;
- svc_params_.scaling_factor_num[0] = 72;
- svc_params_.scaling_factor_den[0] = 288;
- svc_params_.scaling_factor_num[1] = 144;
- svc_params_.scaling_factor_den[1] = 288;
- svc_params_.scaling_factor_num[2] = 288;
- svc_params_.scaling_factor_den[2] = 288;
- cfg_.rc_dropframe_thresh = 30;
- cfg_.kf_max_dist = 9999;
+ svc_params_.scaling_factor_num[0] = 256;
+ svc_params_.scaling_factor_den[0] = 1280;
+ svc_params_.scaling_factor_num[1] = 1280;
+ svc_params_.scaling_factor_den[1] = 1280;
+ cfg_.rc_dropframe_thresh = 10;
+ cfg_.kf_max_dist = 999999;
+ cfg_.kf_min_dist = 0;
+ cfg_.ss_target_bitrate[0] = 300;
+ cfg_.ss_target_bitrate[1] = 1400;
+ cfg_.layer_target_bitrate[0] = 300;
+ cfg_.layer_target_bitrate[1] = 1400;
+ cfg_.rc_target_bitrate = 1700;
number_spatial_layers_ = cfg_.ss_number_layers;
number_temporal_layers_ = cfg_.ts_number_layers;
- ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,
- 0, 400);
- top_sl_width_ = 640;
- top_sl_height_ = 480;
- cfg_.rc_target_bitrate = 800;
ResetModel();
- dynamic_drop_layer_ = true;
- AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
- cfg_.ts_number_layers, cfg_.temporal_layering_mode,
- layer_target_avg_bandwidth_, bits_in_buffer_model_);
+ layer_target_avg_bandwidth_[0] = cfg_.layer_target_bitrate[0] * 1000 / 30;
+ bits_in_buffer_model_[0] =
+ cfg_.layer_target_bitrate[0] * cfg_.rc_buf_initial_sz;
+ layer_target_avg_bandwidth_[1] = cfg_.layer_target_bitrate[1] * 1000 / 30;
+ bits_in_buffer_model_[1] =
+ cfg_.layer_target_bitrate[1] * cfg_.rc_buf_initial_sz;
+ ::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 60);
+ top_sl_width_ = 1280;
+ top_sl_height_ = 720;
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
- // Don't check rate targeting on two top spatial layer since they will be
- // skipped for part of the sequence.
- CheckLayerRateTargeting(&cfg_, number_spatial_layers_ - 2,
+ CheckLayerRateTargeting(&cfg_, number_spatial_layers_,
number_temporal_layers_, file_datarate_, 0.78, 1.15);
#if CONFIG_VP9_DECODER
// The non-reference frames are expected to be mismatched frames as the
#endif
}
-// Run SVC encoder for 1 temporal layer, 2 spatial layers, with spatial
-// downscale 5x5.
-TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc2SL1TL5x5MultipleRuns) {
+// Params: speed setting, inter-layer prediction mode.
+class DatarateOnePassCbrSvcInterLayerPredSingleBR
+ : public DatarateOnePassCbrSvc,
+ public ::libvpx_test::CodecTestWith2Params<int, int> {
+ public:
+ DatarateOnePassCbrSvcInterLayerPredSingleBR()
+ : DatarateOnePassCbrSvc(GET_PARAM(0)) {
+ memset(&svc_params_, 0, sizeof(svc_params_));
+ }
+ virtual ~DatarateOnePassCbrSvcInterLayerPredSingleBR() {}
+
+ protected:
+ virtual void SetUp() {
+ InitializeConfig();
+ SetMode(::libvpx_test::kRealTime);
+ speed_setting_ = GET_PARAM(1);
+ inter_layer_pred_mode_ = GET_PARAM(2);
+ ResetModel();
+ }
+};
+
+// Check basic rate targeting with different inter-layer prediction modes for 1
+// pass CBR SVC: 3 spatial layers and 3 temporal layers. Run CIF clip with 1
+// thread.
+TEST_P(DatarateOnePassCbrSvcInterLayerPredSingleBR, OnePassCbrSvc3SL3TL) {
cfg_.rc_buf_initial_sz = 500;
cfg_.rc_buf_optimal_sz = 500;
cfg_.rc_buf_sz = 1000;
cfg_.rc_max_quantizer = 63;
cfg_.rc_end_usage = VPX_CBR;
cfg_.g_lag_in_frames = 0;
- cfg_.ss_number_layers = 2;
- cfg_.ts_number_layers = 1;
- cfg_.ts_rate_decimator[0] = 1;
+ cfg_.ss_number_layers = 3;
+ cfg_.ts_number_layers = 3;
+ cfg_.ts_rate_decimator[0] = 4;
+ cfg_.ts_rate_decimator[1] = 2;
+ cfg_.ts_rate_decimator[2] = 1;
cfg_.g_error_resilient = 1;
- cfg_.g_threads = 3;
- cfg_.temporal_layering_mode = 0;
- svc_params_.scaling_factor_num[0] = 256;
- svc_params_.scaling_factor_den[0] = 1280;
- svc_params_.scaling_factor_num[1] = 1280;
- svc_params_.scaling_factor_den[1] = 1280;
- cfg_.rc_dropframe_thresh = 10;
- cfg_.kf_max_dist = 999999;
- cfg_.kf_min_dist = 0;
- cfg_.ss_target_bitrate[0] = 300;
- cfg_.ss_target_bitrate[1] = 1400;
- cfg_.layer_target_bitrate[0] = 300;
- cfg_.layer_target_bitrate[1] = 1400;
- cfg_.rc_target_bitrate = 1700;
+ cfg_.g_threads = 1;
+ cfg_.temporal_layering_mode = 3;
+ svc_params_.scaling_factor_num[0] = 72;
+ svc_params_.scaling_factor_den[0] = 288;
+ svc_params_.scaling_factor_num[1] = 144;
+ svc_params_.scaling_factor_den[1] = 288;
+ svc_params_.scaling_factor_num[2] = 288;
+ svc_params_.scaling_factor_den[2] = 288;
+ cfg_.rc_dropframe_thresh = 30;
+ cfg_.kf_max_dist = 9999;
number_spatial_layers_ = cfg_.ss_number_layers;
number_temporal_layers_ = cfg_.ts_number_layers;
+ ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,
+ 0, 400);
+ top_sl_width_ = 640;
+ top_sl_height_ = 480;
+ cfg_.rc_target_bitrate = 800;
ResetModel();
- layer_target_avg_bandwidth_[0] = cfg_.layer_target_bitrate[0] * 1000 / 30;
- bits_in_buffer_model_[0] =
- cfg_.layer_target_bitrate[0] * cfg_.rc_buf_initial_sz;
- layer_target_avg_bandwidth_[1] = cfg_.layer_target_bitrate[1] * 1000 / 30;
- bits_in_buffer_model_[1] =
- cfg_.layer_target_bitrate[1] * cfg_.rc_buf_initial_sz;
- ::libvpx_test::Y4mVideoSource video("niklas_1280_720_30.y4m", 0, 60);
- top_sl_width_ = 1280;
- top_sl_height_ = 720;
+ AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
+ cfg_.ts_number_layers, cfg_.temporal_layering_mode,
+ layer_target_avg_bandwidth_, bits_in_buffer_model_);
+ ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
+ CheckLayerRateTargeting(&cfg_, number_spatial_layers_,
+ number_temporal_layers_, file_datarate_, 0.78, 1.15);
+#if CONFIG_VP9_DECODER
+ // The non-reference frames are expected to be mismatched frames as the
+ // encoder will avoid loopfilter on these frames.
+ EXPECT_EQ(num_nonref_frames_, GetMismatchFrames());
+#endif
+}
+
+// Check rate targeting with different inter-layer prediction modes for 1 pass
+// CBR SVC: 3 spatial layers and 3 temporal layers, changing the target bitrate
+// at the middle of encoding.
+TEST_P(DatarateOnePassCbrSvcSingleBR, OnePassCbrSvc3SL3TLDynamicBitrateChange) {
+ cfg_.rc_buf_initial_sz = 500;
+ cfg_.rc_buf_optimal_sz = 500;
+ cfg_.rc_buf_sz = 1000;
+ cfg_.rc_min_quantizer = 0;
+ cfg_.rc_max_quantizer = 63;
+ cfg_.rc_end_usage = VPX_CBR;
+ cfg_.g_lag_in_frames = 0;
+ cfg_.ss_number_layers = 3;
+ cfg_.ts_number_layers = 3;
+ cfg_.ts_rate_decimator[0] = 4;
+ cfg_.ts_rate_decimator[1] = 2;
+ cfg_.ts_rate_decimator[2] = 1;
+ cfg_.g_error_resilient = 1;
+ cfg_.g_threads = 1;
+ cfg_.temporal_layering_mode = 3;
+ svc_params_.scaling_factor_num[0] = 72;
+ svc_params_.scaling_factor_den[0] = 288;
+ svc_params_.scaling_factor_num[1] = 144;
+ svc_params_.scaling_factor_den[1] = 288;
+ svc_params_.scaling_factor_num[2] = 288;
+ svc_params_.scaling_factor_den[2] = 288;
+ cfg_.rc_dropframe_thresh = 30;
+ cfg_.kf_max_dist = 9999;
+ number_spatial_layers_ = cfg_.ss_number_layers;
+ number_temporal_layers_ = cfg_.ts_number_layers;
+ ::libvpx_test::I420VideoSource video("niklas_640_480_30.yuv", 640, 480, 30, 1,
+ 0, 400);
+ top_sl_width_ = 640;
+ top_sl_height_ = 480;
+ cfg_.rc_target_bitrate = 800;
+ ResetModel();
+ change_bitrate_ = true;
+ AssignLayerBitrates(&cfg_, &svc_params_, cfg_.ss_number_layers,
+ cfg_.ts_number_layers, cfg_.temporal_layering_mode,
+ layer_target_avg_bandwidth_, bits_in_buffer_model_);
ASSERT_NO_FATAL_FAILURE(RunLoop(&video));
CheckLayerRateTargeting(&cfg_, number_spatial_layers_,
number_temporal_layers_, file_datarate_, 0.78, 1.15);
VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcSingleBR,
::testing::Range(5, 10));
+VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcInterLayerPredSingleBR,
+ ::testing::Range(5, 10), ::testing::Range(0, 3));
+
VP9_INSTANTIATE_TEST_CASE(DatarateOnePassCbrSvcMultiBR, ::testing::Range(5, 10),
::testing::Range(0, 3));
projects / libvpx / commitdiff