char portstr[128];
ACCEPT_TYPE_ARG3 addrsize;
fd_set fdset;
- struct timeval timeout;
+ struct timeval endtime;
int i,
r;
/* Don't need the server address anymore */
pg_freeaddrinfo_all(hint.ai_family, serveraddrs);
- /* Wait for a response */
- timeout.tv_sec = RADIUS_TIMEOUT;
- timeout.tv_usec = 0;
- FD_ZERO(&fdset);
- FD_SET(sock, &fdset);
+ /*
+ * Figure out at what time we should time out. We can't just use
+ * a single call to select() with a timeout, since somebody can
+ * be sending invalid packets to our port thus causing us to
+ * retry in a loop and never time out.
+ */
+ gettimeofday(&endtime, NULL);
+ endtime.tv_sec += RADIUS_TIMEOUT;
while (true)
{
+ struct timeval timeout;
+ struct timeval now;
+ int64 timeoutval;
+
+ gettimeofday(&now, NULL);
+ timeoutval = (endtime.tv_sec * 1000000 + endtime.tv_usec) - (now.tv_sec * 1000000 + now.tv_usec);
+ if (timeoutval <= 0)
+ {
+ ereport(LOG,
+ (errmsg("timeout waiting for RADIUS response")));
+ closesocket(sock);
+ return STATUS_ERROR;
+ }
+ timeout.tv_sec = timeoutval / 1000000;
+ timeout.tv_usec = timeoutval % 1000000;
+
+ FD_ZERO(&fdset);
+ FD_SET(sock, &fdset);
+
r = select(sock + 1, &fdset, NULL, NULL, &timeout);
if (r < 0)
{
return STATUS_ERROR;
}
- /* else we actually have a packet ready to read */
- break;
- }
-
- /* Read the response packet */
- addrsize = sizeof(remoteaddr);
- packetlength = recvfrom(sock, receive_buffer, RADIUS_BUFFER_SIZE, 0,
- (struct sockaddr *) & remoteaddr, &addrsize);
- if (packetlength < 0)
- {
- ereport(LOG,
- (errmsg("could not read RADIUS response: %m")));
- closesocket(sock);
- return STATUS_ERROR;
- }
+ /*
+ * Attempt to read the response packet, and verify the contents.
+ *
+ * Any packet that's not actually a RADIUS packet, or otherwise
+ * does not validate as an explicit reject, is just ignored and
+ * we retry for another packet (until we reach the timeout). This
+ * is to avoid the possibility to denial-of-service the login by
+ * flooding the server with invalid packets on the port that
+ * we're expecting the RADIUS response on.
+ */
- closesocket(sock);
+ addrsize = sizeof(remoteaddr);
+ packetlength = recvfrom(sock, receive_buffer, RADIUS_BUFFER_SIZE, 0,
+ (struct sockaddr *) & remoteaddr, &addrsize);
+ if (packetlength < 0)
+ {
+ ereport(LOG,
+ (errmsg("could not read RADIUS response: %m")));
+ return STATUS_ERROR;
+ }
#ifdef HAVE_IPV6
- if (remoteaddr.sin6_port != htons(port->hba->radiusport))
+ if (remoteaddr.sin6_port != htons(port->hba->radiusport))
#else
- if (remoteaddr.sin_port != htons(port->hba->radiusport))
+ if (remoteaddr.sin_port != htons(port->hba->radiusport))
#endif
- {
+ {
#ifdef HAVE_IPV6
- ereport(LOG,
- (errmsg("RADIUS response was sent from incorrect port: %i",
- ntohs(remoteaddr.sin6_port))));
+ ereport(LOG,
+ (errmsg("RADIUS response was sent from incorrect port: %i",
+ ntohs(remoteaddr.sin6_port))));
#else
- ereport(LOG,
- (errmsg("RADIUS response was sent from incorrect port: %i",
- ntohs(remoteaddr.sin_port))));
+ ereport(LOG,
+ (errmsg("RADIUS response was sent from incorrect port: %i",
+ ntohs(remoteaddr.sin_port))));
#endif
- return STATUS_ERROR;
- }
-
- if (packetlength < RADIUS_HEADER_LENGTH)
- {
- ereport(LOG,
- (errmsg("RADIUS response too short: %i", packetlength)));
- return STATUS_ERROR;
- }
-
- if (packetlength != ntohs(receivepacket->length))
- {
- ereport(LOG,
- (errmsg("RADIUS response has corrupt length: %i (actual length %i)",
- ntohs(receivepacket->length), packetlength)));
- return STATUS_ERROR;
- }
+ continue;
+ }
- if (packet->id != receivepacket->id)
- {
- ereport(LOG,
- (errmsg("RADIUS response is to a different request: %i (should be %i)",
- receivepacket->id, packet->id)));
- return STATUS_ERROR;
- }
+ if (packetlength < RADIUS_HEADER_LENGTH)
+ {
+ ereport(LOG,
+ (errmsg("RADIUS response too short: %i", packetlength)));
+ continue;
+ }
- /*
- * Verify the response authenticator, which is calculated as
- * MD5(Code+ID+Length+RequestAuthenticator+Attributes+Secret)
- */
- cryptvector = palloc(packetlength + strlen(port->hba->radiussecret));
+ if (packetlength != ntohs(receivepacket->length))
+ {
+ ereport(LOG,
+ (errmsg("RADIUS response has corrupt length: %i (actual length %i)",
+ ntohs(receivepacket->length), packetlength)));
+ continue;
+ }
- memcpy(cryptvector, receivepacket, 4); /* code+id+length */
- memcpy(cryptvector + 4, packet->vector, RADIUS_VECTOR_LENGTH); /* request
- * authenticator, from
- * original packet */
- if (packetlength > RADIUS_HEADER_LENGTH) /* there may be no attributes
- * at all */
- memcpy(cryptvector + RADIUS_HEADER_LENGTH, receive_buffer + RADIUS_HEADER_LENGTH, packetlength - RADIUS_HEADER_LENGTH);
- memcpy(cryptvector + packetlength, port->hba->radiussecret, strlen(port->hba->radiussecret));
+ if (packet->id != receivepacket->id)
+ {
+ ereport(LOG,
+ (errmsg("RADIUS response is to a different request: %i (should be %i)",
+ receivepacket->id, packet->id)));
+ continue;
+ }
- if (!pg_md5_binary(cryptvector,
- packetlength + strlen(port->hba->radiussecret),
- encryptedpassword))
- {
- ereport(LOG,
- (errmsg("could not perform MD5 encryption of received packet")));
+ /*
+ * Verify the response authenticator, which is calculated as
+ * MD5(Code+ID+Length+RequestAuthenticator+Attributes+Secret)
+ */
+ cryptvector = palloc(packetlength + strlen(port->hba->radiussecret));
+
+ memcpy(cryptvector, receivepacket, 4); /* code+id+length */
+ memcpy(cryptvector + 4, packet->vector, RADIUS_VECTOR_LENGTH); /* request
+ * authenticator, from
+ * original packet */
+ if (packetlength > RADIUS_HEADER_LENGTH) /* there may be no attributes
+ * at all */
+ memcpy(cryptvector + RADIUS_HEADER_LENGTH, receive_buffer + RADIUS_HEADER_LENGTH, packetlength - RADIUS_HEADER_LENGTH);
+ memcpy(cryptvector + packetlength, port->hba->radiussecret, strlen(port->hba->radiussecret));
+
+ if (!pg_md5_binary(cryptvector,
+ packetlength + strlen(port->hba->radiussecret),
+ encryptedpassword))
+ {
+ ereport(LOG,
+ (errmsg("could not perform MD5 encryption of received packet")));
+ pfree(cryptvector);
+ continue;
+ }
pfree(cryptvector);
- return STATUS_ERROR;
- }
- pfree(cryptvector);
- if (memcmp(receivepacket->vector, encryptedpassword, RADIUS_VECTOR_LENGTH) != 0)
- {
- ereport(LOG,
- (errmsg("RADIUS response has incorrect MD5 signature")));
- return STATUS_ERROR;
- }
+ if (memcmp(receivepacket->vector, encryptedpassword, RADIUS_VECTOR_LENGTH) != 0)
+ {
+ ereport(LOG,
+ (errmsg("RADIUS response has incorrect MD5 signature")));
+ continue;
+ }
- if (receivepacket->code == RADIUS_ACCESS_ACCEPT)
- return STATUS_OK;
- else if (receivepacket->code == RADIUS_ACCESS_REJECT)
- return STATUS_ERROR;
- else
- {
- ereport(LOG,
- (errmsg("RADIUS response has invalid code (%i) for user \"%s\"",
- receivepacket->code, port->user_name)));
- return STATUS_ERROR;
- }
+ if (receivepacket->code == RADIUS_ACCESS_ACCEPT)
+ {
+ closesocket(sock);
+ return STATUS_OK;
+ }
+ else if (receivepacket->code == RADIUS_ACCESS_REJECT)
+ {
+ closesocket(sock);
+ return STATUS_ERROR;
+ }
+ else
+ {
+ ereport(LOG,
+ (errmsg("RADIUS response has invalid code (%i) for user \"%s\"",
+ receivepacket->code, port->user_name)));
+ continue;
+ }
+ } /* while (true) */
}
projects / postgresql / commitdiff