NetWare make files and .def to build the new auth modules

git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@96790 13f79535-47bb-0310-9956-ffa450edef68

diff --git a/modules/aaa/NWGNUauthbasc b/modules/aaa/NWGNUauthbasc
new file mode 100644 (file)
index 0000000..75b273a
--- /dev/null
+++ b/modules/aaa/NWGNUauthbasc
@@ -0,0 +1,255 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authbasc
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Basic Authentication Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = AuthBasic Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authbasc.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_auth_basic.o \
+       $(OBJDIR)/auth_provider.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       auth_basic_module \
+       authn_register_provider \
+       authn_lookup_provider \
+       authz_register_provider \
+       authz_lookup_provider \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthdigt b/modules/aaa/NWGNUauthdigt
new file mode 100644 (file)
index 0000000..5ee336b
--- /dev/null
+++ b/modules/aaa/NWGNUauthdigt
@@ -0,0 +1,255 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authdigt
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Digest Authentication Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = Digest Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authdigt.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_auth_digest.o \
+       $(OBJDIR)/auth_provider.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       auth_digest_module \
+       authn_register_provider \
+       authn_lookup_provider \
+       authz_register_provider \
+       authz_lookup_provider \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthnano b/modules/aaa/NWGNUauthnano
new file mode 100644 (file)
index 0000000..299ded8
--- /dev/null
+++ b/modules/aaa/NWGNUauthnano
@@ -0,0 +1,250 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authnano
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Anonymouse Authentication Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = AuthAnon Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authnano.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authn_anon.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authn_anon_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthndbm b/modules/aaa/NWGNUauthndbm
new file mode 100644 (file)
index 0000000..ca8bbfd
--- /dev/null
+++ b/modules/aaa/NWGNUauthndbm
@@ -0,0 +1,250 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authndbm
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Database Authentication Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = AuthnDBM Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authndbm.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authn_dbm.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       authn_register_provider \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authn_dbm_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthndef b/modules/aaa/NWGNUauthndef
new file mode 100644 (file)
index 0000000..20996e7
--- /dev/null
+++ b/modules/aaa/NWGNUauthndef
@@ -0,0 +1,250 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authndef
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Default Authentication Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = Authndef Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authndef.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authn_default.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authn_default_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthnfil b/modules/aaa/NWGNUauthnfil
new file mode 100644 (file)
index 0000000..cbeb8b4
--- /dev/null
+++ b/modules/aaa/NWGNUauthnfil
@@ -0,0 +1,251 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authnfil
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = File Authentication Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = AuthnFile Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authnfil.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authn_file.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       authn_register_provider \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authn_file_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthzdbm b/modules/aaa/NWGNUauthzdbm
new file mode 100644 (file)
index 0000000..f79e705
--- /dev/null
+++ b/modules/aaa/NWGNUauthzdbm
@@ -0,0 +1,250 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authzdbm
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Database Authorization Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = AuthzDBM Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authzdbm.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authz_dbm.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authz_dbm_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthzdef b/modules/aaa/NWGNUauthzdef
new file mode 100644 (file)
index 0000000..d3b914f
--- /dev/null
+++ b/modules/aaa/NWGNUauthzdef
@@ -0,0 +1,250 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authzdef
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Default Authorization Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = Authzdef Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authzdef.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authz_default.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authz_default_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthzgrp b/modules/aaa/NWGNUauthzgrp
new file mode 100644 (file)
index 0000000..3b6f97f
--- /dev/null
+++ b/modules/aaa/NWGNUauthzgrp
@@ -0,0 +1,250 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authzgrp
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = Group File Authorization Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = AuthzGrp Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authzgrp.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authz_groupfile.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authz_groupfile_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUauthzusr b/modules/aaa/NWGNUauthzusr
new file mode 100644 (file)
index 0000000..f4f3a06
--- /dev/null
+++ b/modules/aaa/NWGNUauthzusr
@@ -0,0 +1,250 @@
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary.  This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\build\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS       += \
+                       $(AP_WORK)/include \
+                       $(NWOS) \
+                       $(AP_WORK)/modules/arch/netware \
+                       $(AP_WORK)/srclib/apr/include \
+                       $(AP_WORK)/srclib/apr-util/include \
+                       $(AP_WORK)/srclib/apr \
+                       $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS                += \
+                       -prefix pre_nw.h \
+                       $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES       += \
+                       $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS                += \
+                       $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS       += \
+                       $(EOLIST)
+
+XCFLAGS                += \
+                       $(EOLIST)
+
+XDEFINES       += \
+                       $(EOLIST)
+
+XLFLAGS                += \
+                       $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm.  If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME               = authzusr
+
+#
+# This is used by the link '-desc ' directive. 
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION        = User Authorization Module
+
+#
+# This is used by the '-threadname' directive.  If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME        = AuthzUser Module
+
+#
+# If this is specified, it will override VERSION value in 
+# $(AP_WORK)\build\NWGNUenvironment.inc
+#
+NLM_VERSION            =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM  = _LibCPrelude
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM   = _LibCPostlude
+
+#
+# If this is specified it will be used by the link '-check' directive
+#
+NLM_CHECK_SYM  =
+
+#
+# If these are specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS              =  AUTOUNLOAD, PSEUDOPREEMPTION
+
+#
+# If this is specified it will be linked in with the XDCData option in the def 
+# file instead of the default of $(NWOS)/apache.xdc.  XDCData can be disabled
+# by setting APACHE_UNIPROC in the environment
+#
+XDCDATA         = 
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+       $(OBJDIR)/authzusr.nlm \
+       $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+       $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+       $(OBJDIR)/mod_authz_user.o \
+       $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+       libcpre.o \
+       $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+       aprlib \
+       libc \
+       $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+ 
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+       @$(APR)/aprlib.imp \
+       @$(NWOS)/httpd.imp \
+       @libc.imp \
+       $(EOLIST)
+ 
+#   
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+       authz_user_module \
+       $(EOLIST)
+       
+#   
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+               $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the 
+# correct place.  (See $(AP_WORK)\build\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\build\NWGNUtail.inc
+

diff --git a/modules/aaa/NWGNUmakefile b/modules/aaa/NWGNUmakefile
index fc72c7355e4df29aa75093b888d242bee9f0ea65..7a45c0c60d0ef21a72c6e94b08c704e2196a0a25 100644 (file)
--- a/modules/aaa/NWGNUmakefile
+++ b/modules/aaa/NWGNUmakefile
@@ -152,9 +152,16 @@ XDCDATA         =
 # If there is an NLM target, put it here
 #
 TARGET_nlm = \
-       $(OBJDIR)/authanon.nlm \
-       $(OBJDIR)/authdbm.nlm \
-       $(OBJDIR)/digest.nlm \
+       $(OBJDIR)/authbasc.nlm \
+       $(OBJDIR)/authdigt.nlm \
+       $(OBJDIR)/authnano.nlm \
+       $(OBJDIR)/authndbm.nlm \
+       $(OBJDIR)/authndef.nlm \
+       $(OBJDIR)/authnfil.nlm \
+       $(OBJDIR)/authzdbm.nlm \
+       $(OBJDIR)/authzdef.nlm \
+       $(OBJDIR)/authzgrp.nlm \
+       $(OBJDIR)/authzusr.nlm \
        $(EOLIST)
 
 #

diff --git a/modules/arch/netware/mod_auth_basic.def b/modules/arch/netware/mod_auth_basic.def
new file mode 100644 (file)
index 0000000..0a6f81a
--- /dev/null
+++ b/modules/arch/netware/mod_auth_basic.def
@@ -0,0 +1 @@
+EXPORT  auth_basic_module

diff --git a/modules/arch/netware/mod_authn_anon.def b/modules/arch/netware/mod_authn_anon.def
new file mode 100644 (file)
index 0000000..78bb61b
--- /dev/null
+++ b/modules/arch/netware/mod_authn_anon.def
@@ -0,0 +1 @@
+EXPORT  authn_anon_module

diff --git a/modules/arch/netware/mod_authn_dbm.def b/modules/arch/netware/mod_authn_dbm.def
new file mode 100644 (file)
index 0000000..16c6b32
--- /dev/null
+++ b/modules/arch/netware/mod_authn_dbm.def
@@ -0,0 +1,2 @@
+EXPORT  authn_dbm_module
+IMPORT  authn_register_provider

diff --git a/modules/arch/netware/mod_authn_default.def b/modules/arch/netware/mod_authn_default.def
new file mode 100644 (file)
index 0000000..fb94aa3
--- /dev/null
+++ b/modules/arch/netware/mod_authn_default.def
@@ -0,0 +1 @@
+EXPORT  authn_default_module

diff --git a/modules/arch/netware/mod_authn_file.def b/modules/arch/netware/mod_authn_file.def
new file mode 100644 (file)
index 0000000..8aac820
--- /dev/null
+++ b/modules/arch/netware/mod_authn_file.def
@@ -0,0 +1,3 @@
+EXPORT  authn_file_module
+IMPORT  authn_register_provider
+

diff --git a/modules/arch/netware/mod_authz_dbm.def b/modules/arch/netware/mod_authz_dbm.def
new file mode 100644 (file)
index 0000000..d52639c
--- /dev/null
+++ b/modules/arch/netware/mod_authz_dbm.def
@@ -0,0 +1 @@
+EXPORT  authz_dbm_module

diff --git a/modules/arch/netware/mod_authz_default.def b/modules/arch/netware/mod_authz_default.def
new file mode 100644 (file)
index 0000000..164564f
--- /dev/null
+++ b/modules/arch/netware/mod_authz_default.def
@@ -0,0 +1 @@
+EXPORT  authz_default_module

diff --git a/modules/arch/netware/mod_authz_groupfile.def b/modules/arch/netware/mod_authz_groupfile.def
new file mode 100644 (file)
index 0000000..25d9555
--- /dev/null
+++ b/modules/arch/netware/mod_authz_groupfile.def
@@ -0,0 +1,2 @@
+EXPORT  authz_groupfile_module
+

diff --git a/modules/arch/netware/mod_authz_user.def b/modules/arch/netware/mod_authz_user.def
new file mode 100644 (file)
index 0000000..043418b
--- /dev/null
+++ b/modules/arch/netware/mod_authz_user.def
@@ -0,0 +1 @@
+EXPORT  authz_user_module