#!/bin/sh
-# Copyright 2014 Quest Software, Inc. ALL RIGHTS RESERVED
-pp_revision="20140924"
- # Copyright 2012 Quest Software, Inc. ALL RIGHTS RESERVED.
+# Copyright 2018 One Identity, LLC. ALL RIGHTS RESERVED
+pp_revision="20180220"
+ # Copyright 2018 One Identity, LLC. ALL RIGHTS RESERVED.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
- # 3. Neither the name of Quest Software, Inc. nor the names of its
+ # 3. Neither the name of One Identity, LLC. nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# Please see <http://rc.quest.com/topics/polypkg/> for more information
pp_version="1.0.0.$pp_revision"
-pp_copyright="Copyright 2012, Quest Software, Inc. ALL RIGHTS RESERVED."
+pp_copyright="Copyright 2018, One Identity, LLC. ALL RIGHTS RESERVED."
pp_opt_debug=false
pp_opt_destdir="$DESTDIR"
version=
summary="no summary"
description="No description"
- copyright="Copyright 2012 Quest Software, Inc. ALL RIGHTS RESERVED."
+ copyright="Copyright 2018 One Identity, LLC. ALL RIGHTS RESERVED."
#-- if the user supplied extra arguments on the command line
# then load them now.
fi
test $# -eq 0 || pp_warn "ignoring extra arguments: $line"
continue;;
- %pre|%post|%preun|%postup|%postun|%files|%depend|%check|%conflict)
+ %pre|%post|%preun|%postup|%preup|%postun|%files|%depend|%check|%conflict)
pp_debug "processing new component section $*"
s="$1"; shift
if test $# -eq 0 || pp_is_qualifier "$1"; then
. $pp_wrkdir/tmp
: > $pp_wrkdir/tmp
;;
- %pre.*|%preun.*|%post.*|%postup.*|%postun.*|%depend.*|%check.*|%conflict.*|%service.*|%fixup)
+ %pre.*|%preun.*|%post.*|%postup.*|%preup.*|%postun.*|%depend.*|%check.*|%conflict.*|%service.*|%fixup)
pp_debug "leaving $section: substituting $pp_wrkdir/tmp"
# cat $pp_wrkdir/tmp >&2 # debugging
$pp_opt_debug && pp_substitute < $pp_wrkdir/tmp >&2
%_initial)
case "$line" in "") continue;; esac # ignore non-section blanks
pp_die "Ignoring text before % section introducer";;
- %set|%pre.*|%preun.*|%post.*|%postup.*|%postun.*|%check.*|%service.*|%fixup)
+ %set|%pre.*|%preun.*|%post.*|%postup.*|%preup.*|%postun.*|%check.*|%service.*|%fixup)
pp_debug "appending line to \$pp_wrkdir/tmp"
echo "$line" >> $pp_wrkdir/tmp
;;
}
pp_solaris_make_service () {
- typeset file out _cmd svc
+ typeset file out svc
svc="${pp_solaris_smf_service_name:-$1}"
file=${pp_solaris_service_script:-"/etc/init.d/${pp_solaris_service_script_name:-$svc}"}
_EOF
fi
- #-- construct a start command that builds a pid file as needed
- # and forks the daemon
- _cmd="$cmd";
+ #-- Construct a start command that builds a pid file as needed
+ # and forks the daemon. Services started by smf may not fork.
if test -z "$pidfile"; then
# The service does not define a pidfile, so we have to make
# our own up. On Solaris systems where there is no /var/run
# we must use /tmp to guarantee the pid files are removed after
# a system crash.
- cat <<. >>$out
+ if test -z "$pp_piddir"; then
pp_piddir="/var/run"
- test -d "\$pp_piddir/." || pp_piddir="/tmp"
+ fi
+ cat <<. >>$out
+ pp_isdaemon=0
+ pp_piddirs="${pp_piddir}${pp_piddir+ }/var/run /tmp"
+ for pp_piddir in \$pp_piddirs; do
+ test -d "\$pp_piddir/." && break
+ done
pidfile="\$pp_piddir/$svc.pid"
.
- _cmd="$cmd & echo \$! > \$pidfile"
else
# The service is able to write its own PID file
cat <<. >>$out
+ pp_isdaemon=1
pidfile="$pidfile"
.
fi
+ pp_su=
if test "${user:-root}" != "root"; then
- _cmd="su $user -c exec $_cmd";
+ pp_su="su $user -c exec "
fi
cat <<. >>$out
stop_signal="${stop_signal:-TERM}"
svc="${svc}"
- # generated command to run $svc as a daemon process
- pp_exec () { $_cmd; }
+ # generated command to run $svc as a service
+ pp_exec () {
+ if [ \$pp_isdaemon -ne 1 ]; then
+ if [ "t\$PP_SMF_SERVICE" = "t" ]; then
+ ${pp_su}$cmd &
+ echo \$! > \$pidfile
+ else
+ echo "via exec."
+ echo \$$ > \$pidfile
+ exec ${pp_su}$cmd
+ return 1
+ fi
+ else
+ ${pp_su}$cmd
+ fi
+ }
.
#-- write the invariant section of the init script
read pid < "$pidfile" 2>/dev/null
if test ${pid:-0} -gt 1 && kill -0 "$pid" 2>/dev/null; then
# make sure command name matches up to the first 8 chars
- c="`echo $_cmd | sed -e 's: .*::' -e 's:^.*/::' -e 's/^\(........\).*$/\1/'`"
+ c="`echo $cmd | sed -e 's: .*::' -e 's:^.*/::' -e 's/^\(........\).*$/\1/'`"
pid="`ps -p $pid 2>/dev/null | sed -n \"s/^ *\($pid\) .*$c *$/\1/p\"`"
if test -n "$pid"; then
return 0
pp_deb_release=
pp_deb_arch=
pp_deb_arch_std=
- pp_deb_maintainer="Quest Software, Inc <support@quest.com>"
+ pp_deb_maintainer="One Identity, LLC <support@oneidentity.com>"
pp_deb_copyright=
pp_deb_distro=
pp_deb_control_description=
pp_rpm_packager=
pp_rpm_provides=
pp_rpm_requires=
+ pp_rpm_requires_pre=
+ pp_rpm_requires_post=
+ pp_rpm_requires_preun=
+ pp_rpm_requires_postun=
pp_rpm_release=
pp_rpm_epoch=
pp_rpm_dev_group="Development/Libraries"
pp_rpm_dbg_description=
pp_rpm_doc_description=
pp_rpm_dev_requires=
+ pp_rpm_dev_requires_pre=
+ pp_rpm_dev_requires_post=
+ pp_rpm_dev_requires_preun=
+ pp_rpm_dev_requires_postun=
pp_rpm_dbg_requires=
+ pp_rpm_dbg_requires_pre=
+ pp_rpm_dbg_requires_post=
+ pp_rpm_dbg_requires_preun=
+ pp_rpm_dbg_requires_postun=
pp_rpm_doc_requires=
+ pp_rpm_doc_requires_pre=
+ pp_rpm_doc_requires_post=
+ pp_rpm_doc_requires_preun=
+ pp_rpm_doc_requires_postun=
pp_rpm_dev_provides=
pp_rpm_dbg_provides=
pp_rpm_doc_provides=
+ pp_rpm_autoprov=
+ pp_rpm_autoreq=
+ pp_rpm_autoreqprov=
+
pp_rpm_dbg_pkgname=debug
pp_rpm_dev_pkgname=devel
pp_rpm_doc_pkgname=doc
}
pp_backend_rpm () {
- local cmp specfile _summary _group _desc _pkg _subname svc
+ local cmp specfile _summary _group _desc _pkg _subname svc _script
specfile=$pp_wrkdir/$name.spec
: > $specfile
Group: ${pp_rpm_group}
License: ${pp_rpm_license}
.
- if test -n "$pp_rpm_url"; then
- pp_rpm_label "URL" "$pp_rpm_url" >>$specfile
- fi
- pp_rpm_label "Vendor" "${pp_rpm_vendor:-$vendor}" >>$specfile
- pp_rpm_label "Packager" "$pp_rpm_packager" >>$specfile
- pp_rpm_label "Provides" "$pp_rpm_provides" >>$specfile
+ pp_rpm_label "URL" "$pp_rpm_url" >>$specfile
+ pp_rpm_label "Vendor" "${pp_rpm_vendor:-$vendor}" >>$specfile
+ pp_rpm_label "Packager" "$pp_rpm_packager" >>$specfile
+ pp_rpm_label "Provides" "$pp_rpm_provides" >>$specfile
+ pp_rpm_label "Requires(pre)" "$pp_rpm_requires_pre" >>$specfile
+ pp_rpm_label "Requires(post)" "$pp_rpm_requires_post" >>$specfile
+ pp_rpm_label "Requires(preun)" "$pp_rpm_requires_preun" >>$specfile
+ pp_rpm_label "Requires(postun)" "$pp_rpm_requires_postun" >>$specfile
+ pp_rpm_label "AutoProv" "$pp_rpm_autoprov" >>$specfile
+ pp_rpm_label "AutoReq" "$pp_rpm_autoreq" >>$specfile
+ pp_rpm_label "AutoReqProv" "$pp_rpm_autoreqprov" >>$specfile
test -n "$pp_rpm_serial" && pp_warn "pp_rpm_serial deprecated"
if test -n "$pp_rpm_epoch"; then
Summary: $name $_summary
Group: $_group
.
+ for _script in pre post preun postun; do
+ eval '_pkg="$pp_rpm_'$cmp'_requires_'$_script'"'
+ if test -n "$_pkg"; then
+ eval pp_rpm_label "Requires($_script)" $_pkg
+ fi
+ done
eval '_pkg="$pp_rpm_'$cmp'_requires"'
if test -n "$_pkg"; then
eval pp_rpm_label Requires ${pp_rpm_name:-$name} $_pkg
<http://developer.apple.com/documentation/DeveloperTools/Conceptual/SoftwareDistribution4/Concepts/sd_pkg_flags.html>
Info.plist = {
- CFBundleGetInfoString: "1.2.3, Quest Software, Inc.",
+ CFBundleGetInfoString: "1.2.3, One Identity, LLC.",
CFBundleIdentifier: "com.quest.rc.openssh",
CFBundleShortVersionString: "1.2.3",
IFMajorVersion: 1,
:
}
+pp_platforms="$pp_platforms bsd"
+
+pp_bsd_munge_text () {
+ # Insert a leading space on each line, replace blank lines with a
+ #space followed by a full-stop.
+ test -z "$1" && pp_die "pp_bsd_munge_text requires a parameter"
+ echo ${1} | sed "s,^\(.*\)$, \1, " | sed "s,^[ \t]*$, .,g"
+}
+
+pp_backend_bsd_detect () {
+ test x"$1" = x"FreeBSD"
+}
+
+pp_backend_bsd_init () {
+
+ # Get the OS revision
+ pp_bsd_detect_os
+
+ # Get the arch (i386/amd64)
+ pp_bsd_detect_arch
+
+ pp_bsd_name=
+ pp_bsd_version=
+ pp_bsd_origin=
+ pp_bsd_comment=
+ pp_bsd_arch=
+ pp_bsd_www=
+ pp_bsd_maintainer=
+ pp_bsd_prefix="/usr/local"
+ pp_bsd_desc=
+ pp_bsd_message=
+
+ # pp_bsd_category must be in array format comma seperated
+ # pp_bsd_category=[security,network]
+ pp_bsd_category=
+
+ # pp_bsd_licenselogic can be one of the following: single, and, or unset
+ pp_bsd_licenselogic=
+
+ # pp_bsd_licenses must be in array format comma seperated
+ # pp_bsd_licenses=[GPLv2,MIT]
+ pp_bsd_licenses=
+
+ # pp_bsd_annotations. These can be any key: value pair
+ # key must be seperated by a :
+ # keyvalue pairs must be comma seperated
+ # pp_bsd_annotations="repo_type: binary, somekey: somevalue"
+ # since all packages created by PolyPackage will be of type binary
+ # let's just set it now.
+ pp_bsd_annotations="repo_type: binary"
+
+ pp_bsd_dbg_pkgname="debug"
+ pp_bsd_dev_pkgname="devel"
+ pp_bsd_doc_pkgname="doc"
+
+ # Make sure any programs we require are installed
+ pp_bsd_check_required_programs
+
+}
+
+pp_bsd_cmp_full_name () {
+ typeset prefix
+ prefix="${pp_bsd_name:-$name}"
+ case "$1" in
+ run) echo "${prefix}" ;;
+ dbg) echo "${prefix}-${pp_bsd_dbg_pkgname}";;
+ dev) echo "${prefix}-${pp_bsd_dev_pkgname}";;
+ doc) echo "${prefix}-${pp_bsd_doc_pkgname}";;
+ *) pp_error "unknown component '$1'";
+ esac
+}
+
+pp_bsd_check_required_programs () {
+ local p needed notfound ok
+ needed= notfound=
+
+ # list of programs FreeBSD needs in order to create a binary package
+ for prog in ${pp_bsd_required_programs:-"pkg"}
+ do
+ if which $prog 2>&1 > /dev/null; then
+ pp_debug "$prog: found"
+ else
+ pp_debug "$prog: not found"
+ case "$prog" in
+ pkg) p=pkg;;
+ *) pp_die "Unexpected pkg tool $prog";;
+ esac
+ notfound="$notfound $prod"
+ pp_contains "$needed" "$p" || needed="$needed $p"
+ fi
+ done
+ if [ -n "$notfound" ]; then
+ pp_error "cannot find these programs: $notfound"
+ pp_error "please install these packages: $needed"
+ fi
+}
+
+pp_bsd_detect_os () {
+ typeset revision
+
+ pp_bsd_os=`uname -s`
+ revision=`uname -r`
+ pp_bsd_os_rev=`echo $revision | awk -F '-' '{print $1}'`
+}
+
+pp_bsd_detect_arch() {
+ pp_bsd_platform="`uname -m`"
+ case $pp_bsd_platform in
+ amd64) pp_bsd_platform_std=x86_64;;
+ i386) pp_bsd_platform_std=i386;;
+ *) pp_bsd_platform_std=unknown;;
+ esac
+}
+
+pp_bsd_label () {
+ local label arg
+ label="$1"; shift
+ for arg
+ do
+ test -z "$arg" || echo "$label: $arg"
+ done
+}
+
+pp_bsd_make_annotations () {
+
+ test -z $1 && pp_die "pp_bsd_make_annotations requires a parameter"
+ manifest=$1
+
+ # Add annotations. These can be any key: value pair
+ # key must be seperated by a :
+ # key:value pairs must be comma seperated.
+ if test -n "$pp_bsd_annotations"; then
+ pp_debug "Processing annotations:"
+ pp_bsd_label "annotations" "{" >> $manifest
+
+ SAVEIFS=$IFS
+ IFS=,
+ for annotate in $pp_bsd_annotations; do
+ # Remove any spaces at the start of the line
+ annotate=`echo $annotate | sed 's/^ *//'`
+ pp_debug " $annotate"
+ echo " $annotate" >> $manifest
+ done
+ IFS=$SAVEIFS
+ echo "}" >> $manifest
+ fi
+}
+
+pp_bsd_make_depends() {
+ typeset package origin version
+ cmp=$1
+ manifest=$2
+
+ if test -s $pp_wrkdir/%depend.${cmp}; then
+ echo "deps: {" >> $manifest
+ cat $pp_wrkdir/%depend.${cmp} | while read package origin version; do
+ if test x != x$package; then
+ pp_debug "Processing dependency: $package"
+ if test x != x$origin -a x != x$version; then
+ pp_debug " $package: {origin: \"$origin\", version: \"$version\"}"
+ echo " $package: {origin: \"$origin\", version: \"$version\"}" >> $manifest
+ else
+ pp_warn "Dependency $package is missing origin or version or both"
+ fi
+ fi
+ done
+ echo "}" >> $manifest
+ fi
+}
+
+pp_bsd_make_messages () {
+ test -z $1 && pp_die "pp_bsd_make_messages requires a parameter"
+ manifest=$1
+
+ pp_debug "Processing messsages"
+
+ # Empty messages: [ ] is OK in the manifest
+ pp_bsd_label "messages" "[" >> $manifest
+ # Look for a single message in the variable pp_bsd_message
+ if test -n "$pp_bsd_message"; then
+ echo " { message: \"`pp_bsd_munge_text "$pp_bsd_message"`\" }," >> $manifest
+ fi
+ local a=1
+ # Look for messages in the variables pp_bsd_message_[1..n]
+ var="pp_bsd_messages_1"
+ while [ -n "${!var}" ]; do
+ echo " { message: \"`pp_bsd_munge_text "${!var}"`\" }," >> $manifest
+ a=`expr $a + 1`
+ var="pp_bsd_messages_$a"
+ done
+ echo "]" >> $manifest
+}
+
+pp_bsd_make_manifest() {
+ local cmp manifest
+
+ cmp="$1"
+ manifest="$2"
+
+ package_name=`pp_bsd_cmp_full_name $cmp`
+
+ # Required for pkg +MANIFEST
+ cat <<-. >> $manifest
+ name: "${package_name}"
+ version: "${pp_bsd_version:-$version}"
+ origin: "${pp_bsd_origin}"
+ www: "${pp_bsd_www}"
+ desc: "`pp_bsd_munge_text "${pp_bsd_desc:-$description}"`"
+ comment: "${pp_bsd_comment:-$summary}"
+ maintainer: "${pp_bsd_maintainer}"
+ prefix: "${pp_bsd_prefix}"
+.
+
+ # Optional, so if they are not included in the pkg-product.pp file then do not create the label
+ pp_bsd_label "categories" "${pp_bsd_categories}" >> $manifest
+ pp_bsd_label "arch" "${pp_bsd_arch}" >> $manifest
+ pp_bsd_label "licenselogic" "${pp_bsd_licenselogic}" >> $manifest
+ pp_bsd_label "licenses" "${pp_bsd_licenses}" >> $manifest
+
+ pp_bsd_make_annotations $manifest
+ pp_bsd_make_depends $cmp $manifest
+
+ pp_bsd_make_messages $manifest
+}
+
+pp_bsd_fakeroot () {
+ if test -s $pp_wrkdir/fakeroot.save; then
+ fakeroot -i $pp_wrkdir/fakeroot.save -s $pp_wrkdir/fakeroot.save "$@"
+ else
+ fakeroot -s $pp_wrkdir/fakeroot.save "$@"
+ fi
+}
+
+pp_bsd_make_data() {
+ # t = file type
+ # m = file mode
+ # o = file owner
+ # g = file group
+ # f = ?
+ # p = file path
+ # st = file link
+ #
+ # EXAMPLE: f 755 root httpd v /usr/bin/hello goodbye
+ # -> /usr/bin/hello: {uname: root, gname: httpd, perm: 755 } goodbye
+ typeset _l t m o g f p st datadir
+ cmp=$1
+ datadir=$pp_wrkdir/`pp_bsd_cmp_full_name $cmp`
+ local path
+
+ outfilelist="$pp_wrkdir/files.list.$cmp"
+ outdirslist="$pp_wrkdir/dirs.list.$cmp"
+
+ pp_debug "Processing $pp_wrkdir/%file.${cmp}"
+
+ echo "files: {" > $outfilelist
+ echo "directories: {" > $outdirslist
+
+ cat $pp_wrkdir/%files.${cmp} | while read t m o g f p st; do
+ test x"$o" = x"-" && o="${pp_bsd_defattr_uid:-root}"
+ test x"$g" = x"-" && g="${pp_bsd_defattr_gid:-wheel}"
+ path=$pp_bsd_prefix$p
+ case "$t" in
+ f) # Files
+ # For now just skip the file if it is volatile, we will need to remove it in the pre uninstall script
+ if [ x"$f" != x"v" ]; then
+ # If the directory doesn't exist where we are going to copy this file, then create it first
+ if [ ! -d `dirname "$datadir$path"` ]; then
+ pp_debug "creating directory `dirname "$datadir$path"`"
+ mkdir -p `dirname "$datadir$path"`
+ fi
+
+ pp_debug "install -D $datadir -o $o -g $g -h sha256 -m ${m} -v $pp_destdir$p $datadir$path";
+ pp_bsd_fakeroot install -D $datadir -o $o -g $g -h sha256 -m ${m} -v $pp_destdir$p $datadir$path;
+ echo " \"$path\": \"-\", \"$path\": {uname: $o, gname: $g, perm: ${m}}" >> $outfilelist;
+ else
+ pp_warn "file $f was marked as volatile, skipping"
+ fi;
+ ;;
+ d) # Directories
+ pp_debug "install -D $datadir -o $o -g $g -m ${m} -d -v $datadir$path";
+ pp_bsd_fakeroot install -D $datadir -o $o -g $g -m ${m} -d -v $datadir$path;
+ echo " \"$path\": \"-\", \"$path\": {uname: $o, gname: $g, perm: ${m}}" >> $outdirslist;
+ ;;
+ s) # Symlinks
+ pp_debug "Found symlink: $datadir$path";
+ # Remove leading /
+ rel_p=`echo $p | sed s,^/,,`
+ (cd $datadir$pp_bsd_prefix; ln -sf $st $rel_p);
+ # Do we care if the file doesn't exist? Just symnlink it regardless and throw a warning? This will be important in the case
+ # where we depend on other packages to be installed and will be using the libs from that package.
+ if [ ! -e "$datadir$path" ]; then
+ pp_warn "$datadir$path does not exist"
+ fi
+ echo " \"$path\": \"$st\"" >> $outfilelist;
+ ;;
+ *) pp_error "Unsupported data file type: %t";;
+ esac
+ done
+
+ echo "}" >> $outfilelist
+ echo "}" >> $outdirslist
+ cat $outfilelist >> $manifest
+ cat $outdirslist >> $manifest
+
+ pp_debug "Finished processing $pp_wrkdir/%file.${cmp}"
+}
+
+pp_bsd_makebsd() {
+ typeset cmp
+ typeset package_build_dir
+ local manifest postinstall preinstall preuninstall postuninstall preupgrade postupgrade
+
+ cmp="$1"
+
+ if test -z "$pp_bsd_platform"; then
+ pp_error "Unknown BSD architecture"
+ return 1
+ fi
+
+ _subname=`pp_bsd_cmp_full_name $cmp`
+ package_build_dir=$pp_wrkdir/$_subname
+
+ manifest="$package_build_dir/+MANIFEST"
+ postinstall="$package_build_dir/+POST_INSTALL"
+ preinstall="$package_build_dir/+PRE_INSTALL"
+ preuninstall="$package_build_dir/+PRE_DEINSTALL"
+ postuninstall="$package_build_dir/+POST_DEINSTALL"
+ preupgrade="$package_build_dir/+PRE_UPGRADE"
+ postupgrade="$package_build_dir/+POST_UPGRADE"
+
+ # Create package dir
+ mkdir -p $package_build_dir
+
+ pp_bsd_make_manifest $cmp $manifest
+ pp_bsd_make_data $cmp
+
+ pp_debug "Processing pre/post install scripts"
+
+ if test -s $pp_wrkdir/%pre.$cmp; then
+ pp_debug "Found %pre.$cmp"
+ {
+ cat "$pp_wrkdir/%pre.$cmp"
+ } > $preinstall
+ pp_debug "Created $preinstall"
+ fi
+
+ if test -s $pp_wrkdir/%post.$cmp; then
+ pp_debug "Found %post.$cmp"
+ {
+ echo "# Post install script for "
+ cat "$pp_wrkdir/%post.$cmp"
+ } > $postinstall
+ pp_debug "Created $postinstall"
+ fi
+
+ pp_debug "Processing pre/post uninstall scripts"
+
+ if test -s $pp_wrkdir/%preun.$cmp; then
+ pp_debug "Found %preun.$cmp"
+ {
+ echo "# Pre uninstall script for ${pp_bsd_name:-$name}"
+ cat "$pp_wrkdir/%preun.$cmp"
+ } > $preuninstall
+ pp_debug "Created pkg $preuninstall"
+ fi
+
+ if test -s $pp_wrkdir/%postun.$cmp; then
+ pp_debug "Found %postun.$cmp"
+ {
+ echo "# Post uninstall script for ${pp_bsd_name:-$name}"
+ cat "$pp_wrkdir/%postun.$cmp"
+ } > $postuninstall
+ pp_debug "Created $postuninstall"
+ fi
+
+ if test -s $pp_wrkdir/%preup.$cmp; then
+ pp_debug "Found %preup.$cmp"
+ {
+ echo "# Pre upgrade script for ${pp_bsd_name:-$name}"
+ cat "$pp_wrkdir/%preup.$cmp"
+ } > $preupgrade
+ pp_debug "Created pkg $preupgrade"
+ fi
+
+ if test -s $pp_wrkdir/%postup.$cmp; then
+ pp_debug "Found %postup.$cmp"
+ {
+ echo "# Post upgrade script for ${pp_bsd_name:-$name}"
+ cat "$pp_wrkdir/%postup.$cmp"
+ } > $postupgrade
+ pp_debug "Created $postupgrade"
+ fi
+}
+
+pp_backend_bsd() {
+ #get-files-dir-entries
+ #create-manifest
+ #create-preuninstall
+ #create-postinstall
+ #create-package
+ #
+
+ for cmp in $pp_components
+ do
+ _subname=`pp_bsd_cmp_full_name $cmp`
+ pp_debug "Generating packaging specific files for $_subname"
+ pp_bsd_makebsd $cmp
+ done
+
+ # call this to fixup any files before creating the actual packages
+ . $pp_wrkdir/%fixup
+
+ for cmp in $pp_components
+ do
+ _subname=`pp_bsd_cmp_full_name $cmp`
+ package_build_dir=$pp_wrkdir/$_subname
+ # Build the actual packages now
+ pp_debug "Building FreeBSD $_subname"
+ pp_debug "Running package create command: pkg create -m $package_build_dir -r $pp_wrkdir/`pp_bsd_cmp_full_name $cmp` -o $pp_wrkdir"
+ pp_bsd_fakeroot pkg create -m $package_build_dir -r $pp_wrkdir/`pp_bsd_cmp_full_name $cmp` -o $pp_wrkdir -v
+ done
+
+}
+
+pp_bsd_name () {
+ typeset cmp="${1:-run}"
+ echo `pp_bsd_cmp_full_name $cmp`"-${pp_bsd_version:-$version}.txz"
+}
+
+pp_backend_bsd_names () {
+ for cmp in $pp_components; do
+ echo `pp_bsd_cmp_full_name $cmp`"-${pp_bsd_version:-$version}.txz"
+ done
+}
+
+pp_backend_bsd_cleanup () {
+ :
+}
+
+pp_backend_bsd_probe () {
+ echo "${pp_bsd_os}-${pp_bsd_platform_std}"
+ echo "${pp_bsd_os}${pp_bsd_os_rev}-${pp_bsd_platform_std}"
+}
+
+
+pp_backend_bsd_vas_platforms() {
+ case "${pp_bsd_platform_std}" in
+ x86_64) echo "FreeBSD-x86_64.txz FreeBSD-i386.txz";;
+ i386) echo "FreeBSD-i386.txz";;
+ *) pp_die "unknown architecture $pp_bsd_platform_std";;
+ esac
+}
+
+
+pp_backend_bsd_install_script () {
+ typeset cmp _cmp_full_name
+
+ echo "#!/bin/sh"
+ pp_install_script_common
+
+ cat <<.
+
+ cmp_to_pkgname () {
+ test x"\$*" = x"all" && set -- $pp_components
+ for cmp
+ do
+ case \$cmp in
+.
+ for cmp in $pp_components; do
+ echo " $cmp) echo '`pp_bsd_cmp_full_name $cmp`';;"
+ done
+
+ cat <<.
+ *) usage;;
+ esac
+ done
+ }
+
+ cmp_to_pathname () {
+ test x"\$*" = x"all" &&
+ set -- $pp_components
+ for cmp
+ do
+ case \$cmp in
+.
+ for cmp in $pp_components; do
+ echo " $cmp) echo \${PP_PKGDESTDIR:-.}/'`pp_bsd_name $cmp`';;"
+ done
+
+ cat <<.
+ *) usage;;
+ esac
+ done
+ }
+
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo $pp_components
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo $pp_services
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ cmp_to_pathname "\$@"
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ pkg add \`cmp_to_pathname "\$@"\`
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ pkg remove \`cmp_to_pkgname "\$@"\`; :
+ ;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ /etc/rc.d/\$svc \$op || ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ test \$# -eq 0 || usage \$op
+ echo "${pp_bsd_os}-${pp_bsd_platform}"
+ echo '`pp_backend_bsd_probe`'
+ ;;
+ *)
+ usage
+ ;;
+ esac
+.
+}
+pp_backend_bsd_function() {
+ case "$1" in
+ pp_mkgroup) cat<<'.';;
+ /usr/sbin/pw group show "$1" 2>/dev/null && return 0
+ /usr/sbin/pw group add "$1"
+.
+ pp_mkuser:depends) echo pp_mkgroup;;
+ pp_mkuser) cat<<'.';;
+ #Check if user exists
+ /usr/sbin/pw user show "$1" 2>/dev/null && return 0
+ pp_mkgroup "${2:-$1}" || return 1
+ echo "Creating user $1"
+ /usr/sbin/pw user add \
+ -n "$1" \
+ -d "${3:-/nonexistent}" \
+ -g "${2:-$1}" \
+ -s "${4:-/bin/false}"
+.
+ pp_havelib) cat<<'.';;
+ for pp_tmp_dir in `echo "/usr/local/lib:/usr/lib:/lib${3:+:$3}" | tr : ' '`; do
+ test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0
+ done
+ return 1
+.
+ *) false;;
+ esac
+}
+
quest_require_vas () {
typeset v d
projects / sudo / commitdiff