X-Git-Url: https://granicus.if.org/sourcecode?a=blobdiff_plain;f=test%2Fvpxenc.sh;h=bf551a890bf2ebe6efe319c83ffe6ae618c11f6b;hb=8281a19465a6bfcffa9ba1935bed1417e6b16ad6;hp=dcfa7f7aa7eeaa0c1ac6a3488b9e22935d096041;hpb=2fe6fa72fc6b1bd8f4264f4527aed2cc63cf8616;p=libvpx

diff --git a/test/vpxenc.sh b/test/vpxenc.sh
index dcfa7f7aa..bf551a890 100755
--- a/test/vpxenc.sh
+++ b/test/vpxenc.sh
@@ -15,138 +15,385 @@
 ##
 . $(dirname $0)/tools_common.sh
 
-TEST_FRAMES=10
+readonly TEST_FRAMES=10
 
 # Environment check: Make sure input is available.
 vpxenc_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "The file ${YUV_RAW_INPUT##*/} must exist in LIBVPX_TEST_DATA_PATH."
+    elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBVPX_TEST_DATA_PATH."
+    return 1
+  fi
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
+    if [ ! -e "${Y4M_NOSQ_PAR_INPUT}" ]; then
+      elog "The file ${Y4M_NOSQ_PAR_INPUT##*/} must exist in"
+      elog "LIBVPX_TEST_DATA_PATH."
+      return 1
+    fi
+  fi
+  if [ -z "$(vpx_tool_path vpxenc)" ]; then
+    elog "vpxenc not found. It must exist in LIBVPX_BIN_PATH or its parent."
     return 1
   fi
 }
 
 vpxenc_can_encode_vp8() {
-  if [ "$(vpxenc_available)" = "yes" ] && \
-     [ "$(vp8_encode_available)" = "yes" ]; then
+  if [ "$(vp8_encode_available)" = "yes" ]; then
     echo yes
   fi
 }
 
 vpxenc_can_encode_vp9() {
-  if [ "$(vpxenc_available)" = "yes" ] && \
-     [ "$(vp9_encode_available)" = "yes" ]; then
+  if [ "$(vp9_encode_available)" = "yes" ]; then
     echo yes
   fi
 }
 
-# Echoes yes to stdout when vpxenc exists according to vpx_tool_available().
-vpxenc_available() {
-  [ -n $(vpx_tool_available vpxenc) ] && echo yes
+# Echo vpxenc command line parameters allowing use of
+# hantro_collage_w352h288.yuv as input.
+yuv_input_hantro_collage() {
+  echo ""${YUV_RAW_INPUT}"
+       --width="${YUV_RAW_INPUT_WIDTH}"
+       --height="${YUV_RAW_INPUT_HEIGHT}""
+}
+
+y4m_input_non_square_par() {
+  echo ""${Y4M_NOSQ_PAR_INPUT}""
+}
+
+y4m_input_720p() {
+  echo ""${Y4M_720P_INPUT}""
 }
 
-# Wrapper function for running vpxenc. Positional parameters are interpreted as
-# follows:
-#   1 - codec name
-#   2 - input width
-#   3 - input height
-#   4 - number of frames to encode
-#   5 - path to input file
-#   6 - path to output file
-#       Note: The output file path must end in .ivf to output an IVF file.
-#   7 - extra flags
-#       Note: Extra flags currently supports a special case: when set to "-"
-#             input is piped to vpxenc via cat.
+# Echo default vpxenc real time encoding params. $1 is the codec, which defaults
+# to vp8 if unspecified.
+vpxenc_rt_params() {
+  local readonly codec="${1:-vp8}"
+  echo "--codec=${codec}
+    --buf-initial-sz=500
+    --buf-optimal-sz=600
+    --buf-sz=1000
+    --cpu-used=-6
+    --end-usage=cbr
+    --error-resilient=1
+    --kf-max-dist=90000
+    --lag-in-frames=0
+    --max-intra-rate=300
+    --max-q=56
+    --min-q=2
+    --noise-sensitivity=0
+    --overshoot-pct=50
+    --passes=1
+    --profile=0
+    --resize-allowed=0
+    --rt
+    --static-thresh=0
+    --undershoot-pct=50"
+}
+
+# Wrapper function for running vpxenc with pipe input. Requires that
+# LIBVPX_BIN_PATH points to the directory containing vpxenc. $1 is used as the
+# input file path and shifted away. All remaining parameters are passed through
+# to vpxenc.
+vpxenc_pipe() {
+  local readonly encoder="$(vpx_tool_path vpxenc)"
+  local readonly input="$1"
+  shift
+  cat "${input}" | eval "${VPX_TEST_PREFIX}" "${encoder}" - \
+    --test-decode=fatal \
+    "$@" ${devnull}
+}
+
+# Wrapper function for running vpxenc. Requires that LIBVPX_BIN_PATH points to
+# the directory containing vpxenc. $1 one is used as the input file path and
+# shifted away. All remaining parameters are passed through to vpxenc.
 vpxenc() {
-  local encoder="${LIBVPX_BIN_PATH}/vpxenc${VPX_TEST_EXE_SUFFIX}"
-  local codec="${1}"
-  local width=${2}
-  local height=${3}
-  local frames=${4}
-  local input=${5}
-  local output="${VPX_TEST_OUTPUT_DIR}/${6}"
-  local extra_flags=${7}
-
-  # Because --ivf must be within the command line to get IVF from vpxenc.
-  if echo "${output}" | egrep -q 'ivf$'; then
-    use_ivf=--ivf
-  else
-    unset use_ivf
-  fi
-
-  if [ "${extra_flags}" = "-" ]; then
-    pipe_input=yes
-    extra_flags=${8}
-  else
-    unset pipe_input
-  fi
-
-  if [ -z "${pipe_input}" ]; then
-    eval "${VPX_TEST_PREFIX}" "${encoder}" --codec=${codec} --width=${width} \
-        --height=${height} --limit=${frames} ${use_ivf} ${extra_flags} \
-        --output="${output}" "${input}" ${devnull}
-  else
-    cat "${input}" \
-        | eval "${VPX_TEST_PREFIX}" "${encoder}" --codec=${codec} \
-            --width=${width} --height=${height} --limit=${frames} ${use_ivf} \
-            ${extra_flags} --output="${output}" - ${devnull}
-  fi
-
-  if [ ! -e "${output}" ]; then
-    # Return non-zero exit status: output file doesn't exist, so something
-    # definitely went wrong.
-    return 1
-  fi
+  local readonly encoder="$(vpx_tool_path vpxenc)"
+  local readonly input="$1"
+  shift
+  eval "${VPX_TEST_PREFIX}" "${encoder}" "${input}" \
+    --test-decode=fatal \
+    "$@" ${devnull}
 }
 
 vpxenc_vp8_ivf() {
   if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then
-    vpxenc vp8 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
-        "${YUV_RAW_INPUT}" vp8.ivf
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8.ivf"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp8 \
+      --limit="${TEST_FRAMES}" \
+      --ivf \
+      --output="${output}"
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
   fi
 }
 
-vpxenc_vp8_ivf_pipe_input() {
-  if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then
-    vpxenc vp8 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
-        "${YUV_RAW_INPUT}" vp8.ivf -
+vpxenc_vp8_webm() {
+  if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp8 \
+      --limit="${TEST_FRAMES}" \
+      --output="${output}"
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
   fi
 }
 
-vpxenc_vp8_webm() {
-  if [ "$(vpxenc_can_encode_vp8)" = "yes" ] &&
-     [ "$(webm_io_available)" = "yes" ] ; then
-    vpxenc vp8 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
-        "${YUV_RAW_INPUT}" vp8.webm
+vpxenc_vp8_webm_rt() {
+  if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8_rt.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      $(vpxenc_rt_params vp8) \
+      --output="${output}"
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+vpxenc_vp8_webm_2pass() {
+  if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp8 \
+      --limit="${TEST_FRAMES}" \
+      --output="${output}" \
+      --passes=2
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+vpxenc_vp8_webm_lag10_frames20() {
+  if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly lag_total_frames=20
+    local readonly lag_frames=10
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8_lag10_frames20.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp8 \
+      --limit="${lag_total_frames}" \
+      --lag-in-frames="${lag_frames}" \
+      --output="${output}" \
+      --auto-alt-ref=1 \
+      --passes=2
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+vpxenc_vp8_ivf_piped_input() {
+  if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8_piped_input.ivf"
+    vpxenc_pipe $(yuv_input_hantro_collage) \
+      --codec=vp8 \
+      --limit="${TEST_FRAMES}" \
+      --ivf \
+      --output="${output}"
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
   fi
 }
 
 vpxenc_vp9_ivf() {
   if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
-    vpxenc vp9 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
-        "${YUV_RAW_INPUT}" vp9.ivf
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9.ivf"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp9 \
+      --limit="${TEST_FRAMES}" \
+      --ivf \
+      --output="${output}"
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
   fi
 }
 
 vpxenc_vp9_webm() {
-  if [ "$(vpxenc_can_encode_vp9)" = "yes" ] &&
-     [ "$(webm_io_available)" = "yes" ] ; then
-    vpxenc vp9 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
-        "${YUV_RAW_INPUT}" vp9.webm
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp9 \
+      --limit="${TEST_FRAMES}" \
+      --output="${output}"
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+vpxenc_vp9_webm_rt() {
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_rt.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      $(vpxenc_rt_params vp9) \
+      --output="${output}"
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+vpxenc_vp9_webm_rt_multithread_tiled() {
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_rt_multithread_tiled.webm"
+    local readonly tilethread_min=2
+    local readonly tilethread_max=4
+    local readonly num_threads="$(seq ${tilethread_min} ${tilethread_max})"
+    local readonly num_tile_cols="$(seq ${tilethread_min} ${tilethread_max})"
+
+    for threads in ${num_threads}; do
+      for tile_cols in ${num_tile_cols}; do
+        vpxenc $(y4m_input_720p) \
+          $(vpxenc_rt_params vp9) \
+          --threads=${threads} \
+          --tile-columns=${tile_cols} \
+          --output="${output}"
+      done
+    done
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+
+    rm "${output}"
+  fi
+}
+
+vpxenc_vp9_webm_2pass() {
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp9 \
+      --limit="${TEST_FRAMES}" \
+      --output="${output}" \
+      --passes=2
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
   fi
 }
 
 vpxenc_vp9_ivf_lossless() {
   if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
-    vpxenc vp9 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
-        "${YUV_RAW_INPUT}" vp9_lossless.ivf --lossless=1
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_lossless.ivf"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp9 \
+      --limit="${TEST_FRAMES}" \
+      --ivf \
+      --output="${output}" \
+      --lossless=1
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+vpxenc_vp9_ivf_minq0_maxq0() {
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_lossless_minq0_maxq0.ivf"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp9 \
+      --limit="${TEST_FRAMES}" \
+      --ivf \
+      --output="${output}" \
+      --min-q=0 \
+      --max-q=0
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+vpxenc_vp9_webm_lag10_frames20() {
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly lag_total_frames=20
+    local readonly lag_frames=10
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_lag10_frames20.webm"
+    vpxenc $(yuv_input_hantro_collage) \
+      --codec=vp9 \
+      --limit="${lag_total_frames}" \
+      --lag-in-frames="${lag_frames}" \
+      --output="${output}" \
+      --passes=2 \
+      --auto-alt-ref=1
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
+  fi
+}
+
+# TODO(fgalligan): Test that DisplayWidth is different than video width.
+vpxenc_vp9_webm_non_square_par() {
+  if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+     [ "$(webm_io_available)" = "yes" ]; then
+    local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_non_square_par.webm"
+    vpxenc $(y4m_input_non_square_par) \
+      --codec=vp9 \
+      --limit="${TEST_FRAMES}" \
+      --output="${output}"
+
+    if [ ! -e "${output}" ]; then
+      elog "Output file does not exist."
+      return 1
+    fi
   fi
 }
 
 vpxenc_tests="vpxenc_vp8_ivf
               vpxenc_vp8_webm
-              vpxenc_vp8_ivf_pipe_input
+              vpxenc_vp8_webm_rt
+              vpxenc_vp8_webm_2pass
+              vpxenc_vp8_webm_lag10_frames20
+              vpxenc_vp8_ivf_piped_input
               vpxenc_vp9_ivf
               vpxenc_vp9_webm
-              vpxenc_vp9_ivf_lossless"
+              vpxenc_vp9_webm_rt
+              vpxenc_vp9_webm_rt_multithread_tiled
+              vpxenc_vp9_webm_2pass
+              vpxenc_vp9_ivf_lossless
+              vpxenc_vp9_ivf_minq0_maxq0
+              vpxenc_vp9_webm_lag10_frames20
+              vpxenc_vp9_webm_non_square_par"
 
 run_tests vpxenc_verify_environment "${vpxenc_tests}"